Table of Contents
Air Dryers / Dehydrators
Parts & Accessories (cont.)
P200W Series
2
Air Dryer Installation Kits
25
P550W Series
3
Air Dryer Monitoring Integration
25
P1500W Series
4
Air Dryer Maintenance Kits
P4200WPM
5
Air Dryer Balance Manifolds
29
P4200W Series
6
Air Distribution Manifolds
30
P6500W
7
4-Port Pressure Manifolds
31
P10KW / P15KW
8
Field Manifolds
32
P20KW / P30KW
9
Monitoring System Cross-Connect Blocks
33
Nitrogen Bottle Replacement Module
10
26-28
Monitoring System Communication &
Jumper Boards
Digital Panels
34
Power Supplies
35
PVD821 / PVD822 Digital Pipe Panels
11
Tubing, Hose & Pipe
36
PVD820 Digital Flow Panel
12
Mounting Panels
37
PVD823 “Heritage” Flow Panel
13
Equipment Racks & Dehydrator Mounting
Brackets
Monitoring Systems
PVD800V Modular Monitoring System
14
Mini Monitoring Systems
15
PVD855 Control Board Upgrade
16
Replacement Boards for Sparton
38
Measuring & Alarm Instruments
39
Additional Accessories
40
Fittings
Press-Lock Fittings
Systems
Included Software
17
Pipe Fittings
18
Barbed Fittings
Compression Fittings (Plastic Tube)
Transducers
PVD873 Series Combo Transducers
19
Transducer Accessories
20
Transducers
21-22
Parts & Accessories
41
42-44
44
45-46
Valve Fittings
46
Underground Air Pipe Fittings
47
Service & Repair
48
Contacting PUREGAS
Back Cover
P08033W Remote Access Air Dryer Cycling
Module
23
Dryer Cycling Interface Modules
Page 1
24
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
P200W Series
Waveguide Dehydrator
•
The most advanced waveguide dehydrator
•
SNMP communication compatible
•
Programmable pressure range from .10 - 8.00 PSIG
• Maintenance free
•
Ultra quiet compressor
•
Compact and lightweight
•
Available in AC and DC models
•
Remote alarm reset capabilities
•
Programmable duty cycle alarm
•
Remote access through HTML interface
• Digital display of operating parameters
•
Available in metric version
•
Air delivery up to 200 SCFD @ 8.00 PSIG
•
Versatile bench top, rack, or wall installation
•
Installation mounting hardware standard
Accessories:
• 23” Equipment Rack (P0395023BLK)
• 23”, 4U, Wall Mounted Bracket (P8457)
• 1/4” Tubing (PMP26A39 - sold per foot)
• 3/8” Tubing (PMP26A20 - sold per foot)
24 VDC
48 VDC
120 - 240 VAC
P200W
P208W
P200WA
Specifications
Power Requirements
P200W
P208W
P200WA
24 VDC (22 - 26 VDC)
(10 amp service with 7
amp slow blow fuse recommended)
48 VDC (36 - 72 VDC)
(10 amp service with 7
amp slow blow fuse recommended)
85 - 264 VAC, 1-Phase
(10 amp service with 5
amp slow blow fuse recommended)
Outlet Pressure Range
Output Capacity
0.10 - 8.0 PSIG (0.7 - 55.2 kPa)
Up to 200 SCFD (5.7 SCMD) continuous at 8.0 PSIG (55.2 kPa)
Outlet Air Relative Humidity
Less than 2% RH to a dew point of -40° F/C
Compressor Type
One-cylinder, DC voltage
Dehydrating Method
Heated Desiccant
Operating Temperature Range
40° to 85° F (5° to 30° C) (optimal)
Noise Level
Alarming
Monitoring
<52 dBA at 10' (3 m)
6 displayed alarms, LED indicator. Power fail and 2 common alarm connections
Web Browser and SNMP compatible communications via Network IP
Outlet Connections
Dimensions
1/4" or 3/8" Press-to-lock tube fitting
17.25" D x 17.5" W x 6.75" H (43.81 cm D x 44.45 cm W x 17.15 cm H)
Weight
R0413
23 lbs (10.4 kgs)
PUREGAS, LLC
800-521-5351
www.puregas.com
Page 2
P550W Series
(Up to 350 SCFD continuous)
•
Air delivery up to 550 SCFD
•
Available in 120 VAC & 220 VAC models
•
Remote real-time data and alarm reset capabilities
•
SNMP communication compatible
• Digital display of all operating parameters
• 8,000 hour maintenance interval
•
Compact and lightweight
•
Versatile installation
•
Ultra quiet compressor
Accessories:
• Universal Rack Mounting Kit (P011674)
• Wall Mounting Kit (P011773)
• 6-Month Maintenance Kit (P011798)
• 8,000 Hour Maintenance Kit (P011673)
• Cycle Module Interface (P012341)
• 3/8” Tubing (PMP26A20 - sold per foot)
Standard Pressure
Low Pressure
120 VAC
220 VAC
P550W
P552W
P550WLP
P552WLP
w/ 4-Port Outlet
(above model #) + H
w/ Outdoor Enclosure
(above model #) + X
Specifications
P550W
P550WLP
Output Capacity
Power Requirements
110 - 125 VAC, 50/60 Hz
(15 Amp service recommended)
208 - 253 VAC, 50/60 Hz
(15 Amp service recommended)
7.0 Amps
3.5 Amps
2 - 15 PSIG
(13.8 - 103.4 KPa)
0.30 - 7.50 PSIG
(2.07 - 51.71 KPa)
Outlet Air Relative Humidity
Heatless Desiccant
Operating Temperature Range
40° to 85° F (5° to 30° C) (optimal)
Noise Level
Dimensions
48 dBA at 10' (3 m)
Standard Alarms - complete readings of all critical measurement points, individual alarm
indication display, including SNMP communication
3/8” tube fitting
(w/ 4-Port Outlet - 3/8” Press-to-lock tube fittings and shut off valves)
12" D x 17.25" W x 27" H (30.5 cm D x 43.8 cm W x 68.6 cm H)
Weight
Page 3
0.30 - 7.50 PSIG
(2.07 - 51.71 KPa)
Two-cylinder, 1/3 HP, oil-less type
Dehydrating Method
Outlet Connections
2 - 15 PSIG
(13.8 - 103.4 KPa)
Less than 2% RH
Compressor Type
Alarms
P552WLP
Normal: Up to 350 SCFD (9.9 SCMD) continuous
Maximum: 550 SCFD (15.6 SCMD) emergency
Running Amps
Outlet Pressure Range
P552W
74 lbs (33.6 kgs)
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
P1500W Series
(250 - 1,200 SCFD)
•
Air delivery up to 1500 SCFD
•
Available in 120 VAC & 220 VAC models
•
Remote real-time data and alarm reset capabilities
•
SNMP communication compatible
• Digital display of all operating parameters
• 8,000 hour maintenance interval
•
Compact and lightweight
•
Versatile installation
•
Ultra quiet compressor
Accessories:
• Universal Rack Mounting Kit (P011674)
• Wall Mounting Kit (P011773)
• 4-Port Outlet Manifold Kit (P012099)
• 6-Month Maintenance Kit (P011910)
• 8,000 Hour Maintenance Kit (P012252)
•
•
Cycle Module Interface (P012341)
3/8” Tubing (PMP26A20 - sold per foot)
Standard Pressure
Low Pressure
120 VAC
220 VAC
P1500W
P1502W
P1500WLP
P1502WLP
Specifications
P1500W
P1500WLP
Output Capacity
Power Requirements
110 - 125 VAC, 50/60 Hz
(15 Amp service recommended)
208 - 253 VAC, 50/60 Hz
(15 Amp service recommended)
7.0 Amps
3.5 Amps
2 - 15 PSIG
(13.8 - 103.4 KPa)
0.30 - 7.50 PSIG
(2.07 - 51.71 KPa)
Outlet Air Relative Humidity
Compressor Type
Two-cylinder, 3/4 HP, oil-less type
Two-cylinder, 1/2 HP, oil-less type
40° to 85° F (5° to 30° C) (optimal)
Noise Level
48 dBA at 10' (3 m)
Standard Alarms - complete readings of all critical measurement points, individual alarm
indication display, including SNMP communication
Outlet Connections
3/8" tube fitting
12" D x 17.25" W x 27" H (30.5 cm D x 43.8 cm W x 68.6 cm H)
Weight
R0413
0.30 - 7.50 PSIG
(2.07 - 51.71 KPa)
Heatless Desiccant
Operating Temperature Range
Dimensions
2 - 15 PSIG
(13.8 - 103.4 KPa)
Less than 2% RH
Dehydrating Method
Alarms
P1502WLP
Normal: Up to 1,200 SCFD (34 SCMD) continuous
Maximum: 1,500 SCFD (42.5 SCMD) emergency
Running Amps
Outlet Pressure Range
P1502W
80 lbs (36.3 kgs)
PUREGAS, LLC
800-521-5351
www.puregas.com
Page 4
P4200WPM
Remote Dryer
•
Air delivery up to 4,200 SCFD
•
All-weather operation (-40° to 120° F) - thermostatically
regulated internal climate controls
•
Remote alarm monitoring capabilities of 6 points
•
Slide-out compressor
•
Rugged aluminum cabinet
•
Quiet operation - only 48 dBA
•
8,000 hour maintenance interval
Accessories:
• Monitoring Interface (PVDW40)
• 6-Month Maintenance Kit (P011643)
• 8,000 Hour Maintenance Kit (P011763)
• 16,000 Hour Maintenance Kit (P011797)
Specifications
Output Capacity
Normal: 2,600 SCFD (73.6 SCMD) continuous
Maximum: 4,200 SCFD (119 SCMD) emergency
Power Requirements
110 - 125 VAC, 50 / 60 Hz
(20 Amp service recommended)
Running Amps
10 Amps
Outlet Pressure Range
0 - 15 PSIG (0 - 103.4 kPa)
Outlet Air Relative Humidity
Less than 2% RH
Compressor Type
Two-cylinder, 3/4 HP, oil-less type
Drying Method
Heatless Desiccant
Operating Temperature Range
-40° to 120° F (-40° to 48° C)
(Optimal: 40° to 85° F (5° to 30° C))
Noise Level
48 dBA at 3’ (0.9 m)
Heat Dissipation
Alarms
4,600 BTU/hr
Complete readings of all critical measurement points, individual alarm indication display
Including 2 common alarm points and remote capabilities for 6 points
Outlet Connection
Dimensions
1/2” NPT Female
20.25" D x 17.5" W x 47.75" H (51.4 cm D x 44.5 cm W x 121.3 cm H)
Weight
Page 5
212 lbs (96 kgs)
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
P4200W Series
(1,000 - 4,000 SCFD)
• LCD display of all operating parameters
• Accurate humidity sensing within ±0.1% RH
• Quietest dryer on the market
• Remote alarm reset capabilities
• SNMP communication compatible
• Remote access through Web Browser interface
• 8,000 hour maintenance interval compressor
NEBS Compliant
Accessories:
• Installation Kit (P011752)
• 6-Month Maintenance Kit (P012314)
• 8,000 Hour Maintenance Kit (P011471)
• Cycle Module Interface (P012341)
• 1/2” Tubing (PPEC430 - sold per foot)
• 3/4” Hose (P07490 - sold per foot)
Standard Pressure
Low Pressure
120 VAC
220 VAC
P4200W
P4202W
P4200WLP
P4202WLP
Specifications
P4200W
P4200WLP
Output Capacity
Power Requirements
110 - 125 VAC, 1 Phase, 50/60 Hz
(15 Amp service recommended)
3.9 Amps
0.3 - 10 PSIG
(2 - 69 KPa)
Heatless Desiccant
Operating Temperature Range
40° to 85° F (5° to 30° C) (optimal)
Noise Level
63 dBA at 3’ (1 m)
Heat Dissipation
3,521 BTU / hr
2,924 BTU / hr
Standard Alarms - complete readings of all critical measurement points,
individual alarm indication display
Web Browser and SNMP compatible communications via Network IP
Outlet Connection
1/2” NPT Female
21” D x 25.25” W x 49” H (53.3 cm D x 64.1 cm W x 124.5 cm H)
Weight
R0413
0.3 - 10 PSIG
(2 - 69 KPa)
Two-cylinder, 3/4 HP, oil-less type
Drying Method
Dimensions
5 - 20 PSIG
(35 - 138 KPa)
Less than 2% RH
Compressor
Monitoring
220 - 230 VAC, 1 Phase, 50/60 Hz
(15 Amp service recommended)
8.6 Amps
5 - 20 PSIG
(35 - 138 KPa)
Outlet Air Humidity
Alarms
P4202WLP
Normal: 2,600 SCFD (74 SCMD) continuous
Maximum: 4,200 SCFD (119 SCMD) emergency
Running Amps
Outlet Pressure Range
P4202W
222 lbs (100 kgs)
PUREGAS, LLC
800-521-5351
www.puregas.com
Page 6
P6500W
(2,000 - 6,000 SCFD)
•
Dual, independently functioning systems
•
Real-time monitoring of over 15 points
•
Remote access and alarm reset capabilities
• LCD display of all operating parameters
• Solid state microprocessor-based circuitry
• Accurate humidity sensing within ±0.1% RH
• Ultra quiet compressor
• Removable compressor tray
• 8,000 hour maintenance interval
Accessories:
• Installation Kit (P011752)
• 6-Month Maintenance Kit (P011766)
• 8,000 Hour Maintenance Kit (P011813)
• 16,000 Hour Maintenance Kit (P011814)
• Monitoring Interface (PVDW30)
• Cycle Module Interface (PVDW31)
• 1/2” Tubing (PPEC430 - sold per foot)
• 3/4” Hose (P07490 - sold per foot)
NEBS Compliant
Specifications
Output Capacity Both Systems / Single System
Power Requirements
Normal: 6,500 SCFD (184.1 SCMD) / 3,250 SCFD (92.1 SCMD) continuous
Maximum: 8,000 SCFD (226.6 SCMD) / 4,000 SCFD (113.3 SCMD) emergency
220 - 230 VAC, 1 Phase, 50/60 Hz (208 VAC not recommended)
(30 Amp service recommended)
Running Amps
15 Amps
Outlet Pressure Range
0 - 15 PSIG (0 - 103.4 kPa)
Outlet Air Relative Humidity
Less than 2% RH
Compressor Type
Two-cylinder, 3/4 HP, oil-less type
Drying Method
Heatless Desiccant
Operating Temperature Range
40° to 85° F (5° to 30° C) (optimal)
Noise Level
78.8 dBA
Heat Dissipation
Alarms
9,200 BTU/hr
Complete readings of all critical measurement points, individual alarm indication display
Including 2 common alarm points and remote capabilities for 15+ points
Outlet Connection
Dimensions
1/2” NPT Female
21” D x 25.25” W x 49” H (53.3 cm D x 64.1 cm W x 124.5 cm H)
Weight
Page 7
265 lbs (120 kgs)
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
P10KW / P15KW
(6,000 - 15,000 SCFD)
•
Real-time monitoring of over 15 points
• Open design for easy maintenance
• Remote alarm reset capabilities
• LCD display of all operating parameters
• Solid state microprocessor-based circuitry
• Accurate humidity sensing within ±0.1% RH
• Single water sealed compressor
• Dual pressure outlets
NEBS Compliant
Accessories:
• Installation Kit (P011890)
• 6-Month Maintenance Kit (P011297)
• Monitoring Interface (PVDW30)
• Cycle Module Interface (PVDW31)
• 3/4” Hose (P07490 - sold per foot)
Specifications
P10KW
Output Capacity
Power Requirements
P15KW
10,000 SCFD
15,000 SCFD
208 - 230 VAC, 1 Phase, 60 Hz
(30 Amp service recommended)
208 - 230 VAC, 3 Phase, 60 Hz
(30 Amp service recommended)
11.5 Amps
10.5 Amps
Running Amps
Outlet Pressure Range
Adjustable Pressure Outlet: 0 - 15 PSIG (0 - 103.4 kPa)
Static Pressure Outlet: 17 PSIG (117.2 kPa)
Outlet Air Relative Humidity
Compressor Type
Less than 2% RH
Water sealed, 2 HP, 1 Phase
Drying Method
Heatless Desiccant
Operating Temperature Range
40° to 85° F (5° to 30° C) (optimal)
Noise Level
86.6 dBA
Heat Dissipation
Alarms
7,150 BTU/hr
9,510 BTU/hr
Complete readings of all critical measurement points, individual alarm indication display
Including 2 common alarm points and remote capabilities for 15+ points
Outlet Connections
Adjustable Pressure Outlet: 3/4” NPT Female
Static Pressure Outlet: 3/4” NPT Female
Dimensions
24” D x 28” W x 51.25” H (61 cm D x 71.1 cm W x 130 cm H)
Weight
R0413
Water sealed, 3 HP, 3 Phase
355 lbs (161 kgs)
PUREGAS, LLC
800-521-5351
www.puregas.com
Page 8
P20KW / P30KW
(10,000 - 30,000 SCFD)
•
Real-time monitoring of over 15 points
•
Remote access and alarm reset capabilities
• LCD display of all operating parameters
• Solid state microprocessor-based circuitry
• Accurate humidity sensing within ±0.1% RH
• Lowest Energy Costs
• Single water sealed compressor
• Dual pressure outlets
• Unique heated drying system
• Maintenance-free sealed cooling system
NEBS Compliant
Accessories:
• Installation Kit (P011890)
• 6-Month Maintenance Kit (P011240)
• Monitoring Interface (PVDW30)
• Cycle Module Interface (PVDW31)
• 3/4” Hose (P07490 - sold per foot)
Specifications
Output Capacity
Power Requirements
P20KW
P30KW
20,000 SCFD (566.6 SCMD)
30,000 SCFD (849.8 SCMD)
208 - 230 VAC, 1 Phase, 60 Hz
(30 Amp service recommended)
208 - 230 VAC, 3 Phase, 60 Hz
(30 Amp service recommended)
17.5 Amps
16.5 Amps
Running Amps
Outlet Pressure Range
Adjustable Pressure Outlet: 0 - 15 PSIG (0 - 103.4 kPa)
Static Pressure Outlet: 17 PSIG (117.2 kPa)
Outlet Air Relative Humidity
Compressor Type
Less than 2% RH
Water sealed, 2 HP, 1 Phase
Drying Method
Heated Desiccant
Operating Temperature Range
40° to 85° F (5° to 30° C) (optimal)
Noise Level
86.6 dBA
Heat Dissipation
Alarms
12,420 BTU/hr
Adjustable Pressure Outlet: 3/4” NPT Female
Static Pressure Outlet: 3/4” NPT Female
20.5” D x 40” W x 58.5” H (52 cm D x 101.6 cm W x 148.6 cm H)
Weight
Page 9
11,710 BTU/hr
Complete readings of all critical measurement points, individual alarm indication display
Including 2 common alarm points and remote capabilities for 15+ points
Oulet Connections
Dimensions
Water sealed, 3 HP, 3 Phase
550 lbs (249.5 kgs)
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
Nitrogen Bottle Replacement Module
Mobile Air
•
Eliminate the need for costly nitrogen bottles
•
Versatile applications - air tools, emergency dry air
•
Equipped with a connection for use with pneumatic
tools
•
Locate easily in a slide-out or compartment tray in a
truck or van
•
Uses the vehicle power supply
•
Conserve labor, energy, and storage costs
•
Available in horizontal or stack configuration
•
Chemical or regenerative heatless air dryers create dry air
•
Compact size and portability for transferring between vehicles
P05860BASH
P05860GLTG
P05860H2
Specifications
P05860BASH
Power Requirements
P05860H2
P05860GLTG
220 VAC, 1-Phase, 60 Hz
220 VAC, 1-Phase, 60 Hz
Running Amps
8.5 Amps
10.6 Amps
Air Compressor
Two-cylinder, oil-less type,
3/4 HP
Four-cylinder, oil-less type, 1.5 HP
Outlet Pressure Range
Ambient Operating Temerature Range
80-110 PSIG
Dry Air: 0-30 PSIG
Tool Air: 0-80 PSIG
35° to 120°F (1.7° to 49°C)
Drying Method
-40° F at atmospheric pressure
12.5” W x 25.3” H x 39.3” L
(32 cm x 64 cm x 100 cm)
Weight
R0413
Silica Gel
Less than 2% RH at 70° F
Dew Point
Dimensions
40° to 95°F (4.5° to 35°C)
Heatless Desiccant
Outlet Air Relative Humidity
80-110 PSIG
12” W x 17.5” H x 66.8” L
(31 cm x 45 cm x 170 cm)
120 lbs (54.4 kgs)
PUREGAS, LLC
800-521-5351
www.puregas.com
12” W x 11.5” H x 64.25” L
(31 cm x 29 cm x 163 cm)
140 lbs (63.5 kgs)
Page 10
PVD821 / PVD822
Digital Pipe Panels
Advanced digital air pipe panels designed to pressurize and monitor one or two air pipes.
•
Drop-in replacement for old style mechanical type pipe panel
•
Directly interfaces with PUREGAS Monitoring Systems
•
Monitor pipe Flows and Pressures remotely
•
The flexibility of the design allows the user to pair up
combinations of PVD Panels to accommodate 1 to 4
separate air pipes in a single 23 inch panel
•
Advanced Pressure and Flow Transducers result in
PVD821
extremely low pressure drop through the panel
•
Precision Pressure Regulator for accurate control of air
outputs
•
Manual shutoff valves for isolating air pipes
•
Multiple operating ranges available (0-100 SCFH Standard,
0-50 SCFH Low Range, and 0-150 SCFH High range)
Accessories:
• 11.5” W x 7” H Blank Spacer Panel (P011182)
(used to mount an individual Pipe Panel to a 23” rack)
• 23” W x 3.5” H Blank Spacer Panel (P011181)
(used to provide a vertical spacing between stacked Pipe Panels)
PVD822
Specifications
Displays
Flow Measurement Range
PVD821
PVD822
Flow: 1 x 4-digit LED
Pressure: 1 x 4-digit LED
Flow: 2 x 4-digit LED
Pressure: 2 x 4-digit LED
0 - 100 SCFH (Optional 0-50 SCFH Low Range and 0-150 SCFH High range)
Flow Measurement Accuracy
+/- 3 SCFH
Pressure Measurement Range
0 - 30 PSI
Pressure Measurement Accuracy
+/- 0.3 PSI
Power Requirements
Inlet Connection(s)
Outlet Connection(s)
-48 VDC
(5 watts maximum)
1 x 1/2” press-lock fitting
2 x 1/2” press-lock fitting
1 x 3/4” compression fitting
2 x 3/4” compression fitting
Test Valves
Mounting
Schrader type
Fits 23” Equipment Rack (2 Panels or 1 Panel + Blank Spacer Panel)
Dimensions
Page 11
11.5” W x 7” H
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
PVD820
Digital Flow Panel
The PVD820 is designed to monitor Cable Flows and Inlet Pressure.
•
Drop-in replacement for aging mechanical type flow panels
•
Most compact and flexible 10 way panel available - only 3.5 inches high
•
Directly interfaces with PUREGAS Monitoring Systems
•
Monitor ten Cable Flows, Total Flow and Inlet Pressure remotely
•
Display of ten Cable Flows and Inlet Pressure
•
The Flow measurement technique automatically compensates for varying pressure and
temperature and the value averaging software ensures stable readings continuously
•
Manual shutoff valves
•
High sensitivity at very low flows combined with an extended measurement range (0-20 SCFH on
individual cable feeds and 0-100 SCFH total) allows the PVD820 to measure and respond to cable
leakage scenarios that are well beyond the range of competing systems
Accessories:
• 23” W x 3.5” H Blank Spacer Panel (P011181)
(used to provide a vertical spacing between stacked Flow Panels)
Specifications
Displays
Outlet Flows: 10 x 2-digit LEDs
Inlet Pressure: 1 x 2-digit LED
Flow Measurement Range
0 - 20 SCFH
Flow Measurement Accuracy
0 - 2.5 SCFH Range: +/- 0.25 SCFH
2.5 - 20 SCFH Range: +/- 0.40 SCFH
Pressure Measurement Range
0 - 14.5 PSI
Pressure Measurement Accuracy
+/- 0.3 PSI
Power Requirements
-48 VDC
(5 watts maximum)
Inlet Connection(s)
1/2” press-lock fitting
Outlet Connection(s)
10 x 3/8” or 1/4” press-lock fittings
Mounting
Fits 23” Equipment Rack
Dimensions
R0413
23” W x 3.5” H x 6” D
PUREGAS, LLC
800-521-5351
www.puregas.com
Page 12
PVD823
“Heritage” Flow Panel
The “Heritage” Flow Panel offers the accuracy of digital panels
with the look and cost of a mechanical style flow rater.
•
Remote monitoring of System Pressure and Total Flow
•
Drop-in replacement for mechanical type flow panels
•
Directly interfaces with PUREGAS Monitoring Systems
•
Manual shutoff valves
Specifications
Displays
Flow: 1 x 4-digit LED
Pressure: 1 x 4-digit LED
Flow Measurement Range
0 - 10 SCFH (mechanical)
Pressure Measurement Range
0 - 14.5 PSI
Pressure Measurement Accuracy
+/- 0.3 PSI
Power Requirements
-48 VDC
(5 watts maximum)
Inlet Connection(s)
1/2” press-lock fitting
Outlet Connection(s)
10 x 3/8” or 1/4” press-lock fittings
Test Valves
12 x Schrader type
Mounting
Fits 23” Equipment Rack
Dimensions
Page 13
23” W x 7” H x 6” D
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
PVD800V
Modular Monitoring System
The PVD800V is an advanced modular Monitoring System designed to monitor dedicated,
subscriber, and addressable transducers, air dryers, panels, trunk and toll cable pair loop
y alarms associated with the p
resistance and binary
pressurized cable network.
•
Monitors up to 400 transducers and 15 dryers and panels
•
Direct replacement for existing monitoring systems
•
Supports Ethernet, PSTN and Serial communications
•
Remote firmware upgrade capability
•
Hot slot plug-in modules
•
Watchdog circuit provides reliable continuous operation
•
Includes support software: PGComm, PGEditor, and PGHist
•
NEBS Level 3 compliant
•
Module configuration customized to your specific monitoring needs
Accessories:
• Portable Power Supply - Converts AC power to -48 VDC (PVD48VT)
• Jumper Boards - Converts Subscriber Transducers from previous Sparton monitoring systems
Single Jumper Board Panel - Up to 36 Subscriber points (PVD800VJ1)
Dual Jumper Board Panel - Up to 72 Subscriber points (PVD800VJ2)
Ordering Information
PVD800V
Chassis - Can accommodate a combination of up to 16 Monitoring Modules
PVD800VC
Control Module
PVD800VP
Power Module
PVD800VA
Addressable Monitoring Module
PVD800VD
Dedicated Monitoring Module - 25 Dedicated and Binary points standard,
or up to 36 Dedicated points in Extended Mode
PVD800VM
Universal Monitoring Module - 25 Subscriber, Dedicated and Binary points
PVD800VB
Blank Slot Cover
PVD800VE
Expansion Module - Allows the addition of a 2nd Chassis for up to double the monitoring capability
R0413
PUREGAS, LLC
800-521-5351
www.puregas.com
Page 14
Mini Monitoring Systems
The PUREGAS Mini Monitoring Systems are designed to monitor Dedicated, Binary, and
Addressable transducers. Perfect for smaller remote locations including Huts and CEVs.
PVD818 Mini Monitoring Module
•
Monitors Binary, Dedicated & Subscriber Transducers
•
Supports monitoring of 15 Puregas Devices and 25 Transducers
•
Daisy chain two Modules to double Transducer capacity
PVD815 & PVD816 Mini Monitoring Modules
•
Monitors Addressable Transducers
PVD815
Inputs Available
Transducers Supported
PVD816
4
16
512
2048
•
Can be configured as a standalone system or used to poll other Mini Systems
•
Supports Ethernet, PSTN and Serial communications
•
Continuous real-time scanning
•
Remote firmware upgrade capability
•
Uses Sparton programming protocols
•
NEBS Level 3 compliant
•
Includes support software: PGComm, PGEditor, and PGHist
Accessories:
• 23” Rack Mounting Panel (P011265)
• 19” Rack Mounting Panel (P0112659)
• Portable Power Supply - Converts AC power to -48 VDC (PVD48VT)
• Jumper Boards - Converts Subscriber Transducers from previous Sparton monitoring systems
Single Jumper Board Panel - Up to 36 Subscriber points (PVD800VJ1)
Ordering Information
PVD818
Monitoring of 25 Binary, Dedicated & Subscriber Transducers and up to 15 Puregas Devices
PVD815
Addressable Transducers - 4 Inputs for up to 512 Transducers
PVD816
Addressable Transducers - 16 Inputs for up to 2048 Transducers
Page 15
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
PVD855
Control Board Upgrade for Sparton Systems
The PVD855, Rescue “C” Board, is an advanced state-of-the-art direct replacement for the
Sparton “B” Board. The Rescue “C” Board also advances the technology of the Sparton “B”
board by incorporating multiple high-speed communication options, error checking, and
enhanced memory management.
•
Ethernet, PSTN and Serial communications
•
Supports monitoring of 15 Puregas Devices
•
Remote firmware upgrade capability
•
On-board diagnostic and test facilities
•
Includes support software: PGComm, PGEditor, and PGHist
•
Drop in replacement - installation can be completed in only minutes!
•
Databases are directly transferable (no conversion programs)
•
Fully compatible with the existing measurement modules
•
Any of the existing “B” Board modems are accommodated
•
NEBS level 3 compliant
Accessories:
• PSTN Modem (PVD52) - Compatible with all PUREGAS systems as well as a direct replacement for
older Sparton modems still in use with the PVD855 Rescue Board.
• RS232 Optical Isolator (PVD53) - Allows the PVD855 Rescue “C” Board to monitor PUREGAS Dryers,
Panels and more.
R0413
PUREGAS, LLC
800-521-5351
www.puregas.com
Page 16
Replacement Boards
for Sparton Systems
PUREGAS Replacement Boards are designed with advanced state-of-the-art components,
allowing existing Sparton systems to continue functioning.* The replacement boards are
fully compatible with existing systems with the PVD855 Rescue “C” Board.*
500 Dedicated Module**
Part Number
Description
Replaces Sparton #
P580502
DLT bus with ADC function (No ADC card required)
530502
P580503
DLT switch matrix
530503
600 Subscriber Module**
Part Number
Description
Replaces Sparton #
P580602
SLT bus with ADC & busy detect (No ADC card required)
530602 & 530603
P580609
SLT switch matrix with enhanced switch
530609
Part Number
Description
Replaces Sparton #
P582010B
Universal binary controller & personality function
532010B
P582054
Jumper board
532024
P582052
Switch matrix
532071
Part Number
Description
Replaces Sparton #
P582058
Universal controller
532058
P582156
Universal switch matrix with enhanced switch
532056 & 532156
Binary Module
Universal Module
700 Addressable Module
Part Number
Description
Replaces Sparton #
P582026
MAC Dual CPU
532010
P582054
Jumper board
532021
P582052
Switch matrix
532071
Part Number
Description
Replaces Sparton #
P582026
MAC Dual CPU
532026
P582052
Switch matrix
532052
707 MAC Module
*
These replacement boards require the installation of the PVD855 Rescue “C” Board in the Sparton system for compatibility.
**
These replacement boards must be ordered in module groups and cannot be combined with older Sparton boards in the same module.
Example: if replacing a Sparton 530503 board in a module, it is necessary to replace all remaining 530503 boards and 530502 board in that
module.
Page 17
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
Included Software
Standard with all PUREGAS Monitoring Systems
PGEditor
PGComm
Database Changes
Communication
•
Utilizes Sparton programming
•
Off-line database editing
•
Provides for IP, Dial-up or Direct-Connect
interface
•
Easy to use drop-down menus
•
Remote firmware upgrades
•
Modify the full range of options
Web Browser
PGHist
Network-based Display
Data Storage & Backup
R0413
•
Automatic database backups
•
Full range of reports
•
Rolling 12 month historical data
•
Real-time information
•
Easy to use Excel spreadsheets
•
Standard with all systems
PUREGAS, LLC
800-521-5351
www.puregas.com
Page 18
PVD873 Series
Combo Transducers
PVD873D4 Series Air Dryer 4-in-1 Combo Transducers
Allows for remote monitoring of existing analog air dryers.
•
Real time Flow, Pressure, Temperature, and Humidity
•
Highly reliable solid state microprocessor circuitry
•
Operates on one dedicated wire pair
•
Easily connects to any air dryer pressure outlet and
works with all brands of air dryers
•
Monitor all your existing air dryers in conjunction with a PUREGAS Monitoring System
•
Ideal for Pole Mount and other remote air dryers
•
Available up to 30,000 SCFD
•
*Compatible with PUREGAS Monitoring Systems ONLY
Ordering Information
PVD873D4L
Low Flow Air Dryer (Less than 10,000 SCFD) - Flow, Pressure, Temperature, & Humidity
PVD873D4H
High Flow Air Dryer (10,000 - 30,000 SCFD) - Flow, Pressure, Temperature, & Humidity
PVD873U Series Underground Combo Transducers
Allows for multiple readings through a single dedicated pair
•
Real time readings from the field monitored through your
PUREGAS Monitoring System
•
State of the art solid state design
•
*Compatible with PUREGAS Monitoring Systems ONLY
Ordering Information
PVD873U2
Underground 2-in-1 Combo Transducer - Flow & Pressure
PVD873U4
Underground 4-in-1 Combo Transducer - Flow, Pressure, Temperature, & Humidity
Page 19
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
Transducer Accessories
PVD860D - Transducer Calibrator / Tester
*Required for field installation of PUREGAS Solid State Transducers.
•
128x64 LCD display, 4x4 keyboard
•
Test transducers before and after installation
•
Recalibrate transducers
•
Transducer setup and test
•
Measure cable resistance, voltage and capacitance
•
Measure transducer operational current, quiescent
current, max. reading current and min. reading current
•
Discover/record addresses of transducers on line (multimode search)
•
Password protection
•
Extensive diagnostic facilities
•
Real time clock to display year, month and day
•
Auto power-down
Pressure Transducer Manifolds
PVTMH5P - Five Bank Manifold
• Accommodates up to 5 Manifold Install type Pressure
Transducers
• Includes 6 pair wire harness
PVTMH10P - Ten Bank Manifold
•
Accommodates up to 10 Manifold Install type Pressure
Transducers
•
Includes 25 pair wire harness
R0413
PUREGAS, LLC
800-521-5351
www.puregas.com
Page 20
Transducers
The PUREGAS PVA and PVD Series transducers are designed to automatically and accurately
measure cable air pressure, flow, temperature, and humidity.
PVA10000 Series - Addressable Pressure Transducers
(*Compatible with PUREGAS Monitoring Systems ONLY)
Ordering Information
PVA10493
Drop in, 0-14.5 psi, programmable
PVA11493
Drop in, 0-14.5 psi, address set by jumpers/switch
PVA10293
Manifold install, 0-14.5 psi, programmable, includes test valve and 3/8” plastic tubing fitting
for pressure input
PVA10293S1
Manifold install, 0-14.5 psi, programmable, includes 15ft. #22 (single pair) sealed in plastic
tubing and separate 3/8” plastic tubing fitting for pressure input
PVA10193
Individual install, 0-14.5 psi, programmable, includes 15ft. #22 (single pair) in plastic tubing
for pressure input, test valve and mounting bracket
PVA10193S1
Individual install, 0-14.5 psi, programmable, includes 15ft. #22 (single pair) sealed in plastic
tubing, test valve, mounting bracket and separate 3/8” plastic tubing fitting for pressure
input
PVA10393
Indoor/Aerial install, 0-14.5 psi, programmable, includes 6ft. #18 SVO cord, test valve and
3/8” plastic tubing fitting for pressure input
PVA10393S1
Indoor/Aerial install, 0-14.5 psi, programmable, includes 6ft. #18 SVO cord, test valve and
male 1/8-27NPT for mounting/pressure input
PVA10593
Plastic housing, 0-14.5 psi, programmable, includes 15ft. #22 (single pair) in plastic tubing
for pressure input and test valve
PVA10593S1
Plastic housing, 0-14.5 psi, programmable, includes 15ft. #22 (single pair), test valve and
separate 3/8” plastic tubing fitting for pressure input
PVA11593
Plastic housing, 0-14.5 psi, address set by jumpers/switch, includes 15ft. #22 (single pair)
in plastic tubing for pressure input and test valve
PVA11593S1
Plastic housing, 0-14.5 psi, address set by jumpers/switch, includes 15ft. #22 (single pair),
test valve and separate 3/8” plastic tubing fitting for pressure input
PVD17000 Series - Resistive Pressure Transducers
Ordering Information
Page 21
PVD17292
Manifold install, 0-9.5 psi, includes test valve and 3/8” plastic tubing fitting for pressure
input
PVD17192
Individual install, 0-9.5 psi, includes 15ft. #22 (single pair) in plastic tubing for pressure
input, test valve and mounting bracket
PVD17192S1
Individual install, 0-9.5 psi, includes 15ft. #22 (single pair) sealed in plastic tubing, test
valve, mounting bracket and separate 3/8” plastic tubing fitting for pressure input
PVD17392
Indoor/Aerial install, 0-9.5 psi, includes 6ft. #18 SVO cord, test valve, mounting bracket and
3/8” plastic tubing fitting for pressure input
PVD17392S1
Indoor/Aerial install, 0-9.5 psi, includes 6ft. #18 SVO cord, test valve and male 1/8-27NPT
for mounting/ pressure input
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
Transducers
PVD18000 Series - Solid State Pressure Transducers
(*Compatible with PUREGAS Monitoring Systems ONLY)
Ordering Information
PVD18493
Drop in, 0-14.5 psi, programmable
PVD18293
Manifold install, 0-14.5 psi, programmable, includes test valve and 3/8” plastic tubing fitting
for pressure input
PVD18293S1
Manifold install, 0-14.5 psi, programmable, includes 15ft. #22 (single pair) sealed in plastic
tubing and separate 3/8” plastic tubing fitting for pressure input
PVD18193
Individual install, 0-14.5 psi, programmable, includes 15ft. #22 (single pair) in plastic tubing
for pressure input, test valve and mounting bracket
PVD18193S1
Individual install, 0-14.5 psi, programmable, includes 15ft. #22 (single pair) sealed in plastic
tubing, test valve, mounting bracket and separate 3/8” plastic tubing fitting for pressure
input
PVD18393
Indoor/Aerial install, 0-14.5 psi, programmable, includes 6ft. #18 SVO cord, test valve and
3/8” plastic tubing fitting for pressure input
PVD18393S1
Indoor/Aerial install, 0-14.5 psi, programmable, includes 6ft. #18 SVO cord, test valve and
male 1/8-27NPT for mounting/pressure input
PVD18593
Plastic housing, 0-14.5 psi, programmable, includes 15ft. #22 (single pair) in plastic tubing
for pressure input and test valve
PVD18593S1
Plastic housing, 0-14.5 psi, programmable, includes 15ft. #22 (single pair), test valve and
separate 3/8” plastic tubing fitting for pressure input
PVD27000 Series - Flow Transducers
Ordering Information
PVD27122
Flow Transducer-Underground, 0-9.5 SCFH 20 step. Includes 15ft. #22 (single pair) in
sealed plastic tubing and two 3/8” plastic tubing fittings
PVD27124
Flow Transducer-Underground, 0-19 SCFH 20 step. Includes 15ft. #22 (single pair) in sealed
plastic tubing and two 3/8” plastic tubing fittings
PVD27142
Flow Transducer-Underground, 0-9.5 SCFH 40 step. Includes 15ft. #22 (single pair) in
sealed plastic tubing and two 3/8” plastic tubing fittings
PVD27144
Flow Transducer-Underground, 0-19 SCFH 40 step. Includes 15ft. #22 (single pair) in sealed
plastic tubing and two 3/8” plastic tubing fittings
PVD27322
Flow Transducer-Indoor/Aerial, 0-9.5 SCFH 20 step. Includes 5ft. #18 SVO cord and two
3/8” plastic tubing fittings
PVD27324
Flow Transducer-Indoor/Aerial, 0-19 SCFH 20 step. Includes 5ft. #18 SVO cord and two
3/8” plastic tubing fittings
PVD27342
Flow Transducer-Indoor/Aerial, 0-9.5 SCFH 40 step. Includes 5ft. #18 SVO cord and two
3/8” plastic tubing fittings
PVD27344
Flow Transducer-Indoor/Aerial, 0-19 SCFH 40 step. Includes 5ft. #18 SVO cord and two
3/8” plastic tubing fittings
PVD886 Series - Addressable Moisture Transducers
(*Compatible with PUREGAS Monitoring Systems ONLY)
Ordering Information
R0413
PVD886AMT4
Moisture Transducer-Addressable, includes 4' sensor cable
PVD886AMT8
Moisture Transducer-Addressable, includes 8' sensor cable
PUREGAS, LLC
800-521-5351
www.puregas.com
Page 22
P08033W
Remote Access Air Dryer Cycling Module
The P08033W Remote Access Dryer Cycling Module from PUREGAS is designed to
provide total control and flexibility for the cycling of up to 8 air dryers. This process is fully
automatic and will remain consistent with minimal required periodic maintenance.
•
Remote alarm notification
•
Cycle up to 8 dryers
• LCD display of all operating parameters
• IP and dial-up access
• Remote dryer reset
• GUI for easy programming
• Cycle by time or day of the week
• Emergency Backup feature standard
• Maintenance mode standard
• Easy to use digital display
• Password secured
• Cycles all manufacturers’ dryers
Accessories:
• 23” Rack Mounting Panel (P011265)
• 19” Rack Mounting Panel (P0112659)
• Interface Kit for PUREGAS “W” platform dryers (See next page for details)
• Interface Kit for PUREGAS “D” & “DCO” model dryers (See next page for details)
• Interface Kit for PUREGAS previous model & competitors’ dryers (See next page for details)
Specifications
Power Requirements
120 VAC (±10%), 1 Phase, 50/60 Hz (15 amp service maximum)
Running Amps
.08 Amps
Operating Temperature Range
40° to 85° F (5° to 30° C) (optimal)
Alarms
Power Fail alarm (capable of additional remote monitoring)
Dimensions
Page 23
3.5” D x 13.25” W x 11.75” H
(8.9 cm D x 33.65 cm W x 29.84 cm H)
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
Dryer Cycling Interface Modules
These kits include everything required to connect your specific model air dryer to the
PUREGAS P08033W Remote Access Dryer Cycling Module.
PVDW34 • P550W Series
• P1500W Series
• P4200W Series
PVDW31 • P20KW / P30KW
• P10KW / P15KW
• P6500W
• P4200W (Previous Model) & P4200DCO3A
P08035 (PVDW33) • P20000D / P30000D
• P10000DCO / P15000DCO
• P8000DCO / P12000DCO
• P16000D / P24000D
P08970F1 (PVDW321) • Competitors’ 120 VAC dryers
P08970F2 (PVDW322) • P05000D / P06500D
• Competitors’ 240 VAC dryers
R0413
PUREGAS, LLC
800-521-5351
www.puregas.com
Page 24
Air Dryer Installation Kits
The PUREGAS Air Dryer Installation Kits include all the necessary fittings and valves
required / recommended to connect an air dryer to the supply line. These kits are universal
for accommodating dryers with the outlet port on the top or on the back of the dryer.
P011752 - 1/2” Outlet Installation Kit
•
For dryers with a 1/2” outlet port
•
Allows for connection to 1/2” tubing or 3/4” flex hose
P011890 - 3/4” Outlet Installation Kit
•
For dryers with a 3/4” outlet port
•
Allows for connection to 3/4” flex hose
* in P011752 only
Air Dryer Monitoring Integration
PUREGAS enables you to take full advantage of the information from your dryers by allowing
them to be integrated with the PUREGAS monitoring systems. These products complete
the ensemble by giving you dryer readings right along with those from your panels and
transducers.
PVDW30 - Protocol Converter
Designed for data transfer and communication between PUREGAS
digital dryers and monitoring systems. Allows for a full range of
readings and settings to be displayed and set through the
monitoring interface.
PVDW40 - Protocol Converter
Designed to enable the digital information available in remote
PUREGAS dryers (P4200WPM) to be monitored in detail requiring
only a single wire pair from up to 90 miles away.
Page 25
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
Air Dryer Maintenance Kits
Routine Maintenance Kits
PUREGAS recommends maintenance every 6 months to ensure the highest level of reliability and lowest lifecycle costs.
Current Model Air Dryers
P20KW & P30KW
P10KW & P15KW
Includes water filters, tower inlet
filters, o-ring for water bowl, heat
exchanger filters, and compressor
intake filter.
Part No.
Includes water filters, cabinet
intake filters, o-ring for water bowl,
and compressor intake filter.
Part No.
P011240
P011297
P6500W
P4200W Series (Model with removable front panel)
Includes cabinet intake filter,
compressor intake filters, exhaust
mufflers.
Includes cabinet intake filter,
compressor air intake filter, and
purge muffler.
Part No.
Part No.
P011766
P012314
P4200WPM
P1500W Series
Includes cabinet intake filter,
compressor intake filter, and
humidity element.
Includes cabinet intake filter,
compressor intake filter, exhaust
muffler.
Part No.
Part No.
P011643
P011910
P550W Series
Includes cabinet intake filter,
compressor intake filter, and
humidity element.
Part No.
P011798
Previous Model Air Dryers
P20000D & P30000D
Includes water filter, tower inlet
filters, o-ring for water bowl, heat
exchanger filters, compressor air
intake filter, and humidity sensor.
P10000DCO & P15000DCO
Includes water filter, cabinet intake
filters, o-ring for water bowl,
compressor air intake filter, and
humidity sensor.
Part No.
Part No.
P08656
P07586
P4200W (Model with swing-open door)
Includes cabinet intake filter,
compressor intake filter, and
humidity element.
Part No.
P011799
R0413
PUREGAS, LLC
800-521-5351
www.puregas.com
Page 26
Air Dryer Maintenance Kits
PUREGAS recommends the following maintenance kits be installed at predetermined compressor run time intervals. Our
“W” Series Air Dryers will notify you when they have reached 8,000 hours of operation, making it easy for you to maintain
your Air Dryers.
8,000 Hour Maintenance Kits
P6500W
P4200W Series
Includes heatless dryer
maintenance kits and compressor
maintenance kits.
Includes compressor maintenance
kit and heatless dryer maintenance
kit.
Part No.
Part No.
P011813
P011471
P4200WPM
P1500W Series
Includes compressor maintenance
kit and heatless dryer maintenance
kit.
Includes compressor maintenance
kit and heatless dryer maintenance
kit.
Part No.
Part No.
P011763
P012252
P550W Series
Includes compressor maintenance
kit and heatless dryer maintenance
kit.
Part No.
P011673
16,000 Hour Maintenance Kits
P4200WPM
P6500W
Includes compressor maintenance
kit, heatless dryer maintenance kit,
and humitter.
Includes compressor maintenance
kits, heatless dryer maintenance
kits, and humitters.
Part No.
Part No.
P011814
P011797
Heatless Dryer Maintenance Kits
SKINNER Valves
ASCO Valves
Includes solenoid cores, core tubes
and o-rings, check springs, check
balls, o-rings for desiccant tower,
o-rings for orifice.
Includes solenoid cores, core tubes
and o-rings, check springs, check
balls, o-rings for desiccant tower,
o-rings for orifice. .
Page 27
Part No.
Part No.
P200499
P200499S
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
Air Dryer Maintenance Kits
Annual Maintenance Kits
for Previous Model Air Dryers
P4200DCO Series
P4200STD3
Includes pressure switch grease,
cabinet air filter, compressor
maintenance kit, and humidity
sensor.
Part No.
Includes compressor maintenance
kit and humidity sensor.
Part No.
P07511
P07584
P16000D & P24000D
Includes heat exchanger filters,
water filters, tower inlet filters,
o-ring for water bowl, compressor
air intake filters, and humidity
sensor.
Part No.
P05000D & P06500D
Includes pressure switch grease,
compressor maintenance kits, and
humidity sensors.
Part No.
P07589
P07587
Compressor Maintenance Kits
1/6 HP Compressors (Piston)
Part No. P4323
Includes manifold sleeve, felt filter, head gasket, outlet valve, valve plate, inlet valve, cylinder gasket, piston
ring, piston seal, and rider ring.
1/6 HP Compressors (Rocker)
Part No. P011030
Includes head o-ring, valve retainer, leaf valve, cylinder o-ring, cylinder, retainer screw, piston cup.
1/4 & 1/3 HP Compressors (Piston)
Part No. P4442
Includes manifold sleeve, felt filter, head gasket, outlet valve, valve plate, inlet valve, cylinder gasket, piston
ring, piston seal, and rider ring.
1/3 HP Compressors (Rocker)
Part No. P011661
Includes head o-rings, felt filter, valve retainers, leaf valves, cylinder o-rings, cylinders, piston cups.
1/2 & 3/4 HP Compressors (Piston)
Part No. P3865
Includes manifold sleeve, felt filter, head gasket, outlet valve, valve plate, inlet valve, cylinder gasket, piston
ring, piston seal, and rider ring.
3/4 HP Compressors (Rocker)
Part No. P010491
Includes head o-rings, valve retainers, leaf valves, cylinder o-rings, cylinders, retaining screws, piston cups.
1-1/2 to 3 HP Compressors (Piston)
Part No. P07102
Includes manifold sleeve, felt filter, head gasket, outlet valve, valve plate, inlet valve, cylinder gasket, piston
ring, piston seal, and rider ring.
R0413
PUREGAS, LLC
800-521-5351
www.puregas.com
Page 28
Air Dryer Balance Manifolds
These manifolds are designed to allow for the accurate balancing and stabilizing of airflow
pressures between two or more air dryers and monitoring / metering panels. Versatile
installation and fitting combinations allow these manifolds to be easily configured to meet
the customers’ specific requirements.
P011501 - Small Office Balance Manifold
•
•
•
•
•
•
•
(4) 1/2” FPT Inlet / Outlet ports
(4) Inlet / Outlet shutoff valves and fittings to connect to 1/2” tubing or 3/4” hose (1” optional)
1/4” FPT pressure gauge port
0 - 30 PSI pressure gauge
Maximum operating pressure - 30 PSI
Can be wall mounted or installed on a 23” equipment rack
Mounting Dimensions - 7” H x 23” W x 3” D (additional clearance dependent on fitting orientation)
P02631 - Large Office Balance Manifold
•
•
•
•
•
•
•
•
•
Page 29
(6) 3/4” FPT Inlet / Outlet ports
(4) Inlet / Outlet shutoff valves and fittings to connect to 3/4” hose standard (1” optional)
Expandable up to (6) usable Inlet / Outlet ports
Multiple manifolds can be piped together to accommodate more dryers / panels
1/4” FPT pressure gauge port
0 - 30 PSI pressure gauge
Maximum operating pressure - 30 PSI
Can be wall mounted or installed on a 23” equipment rack
Mounting Dimensions - 7” H x 23” W x 5” D (additional clearance dependent on fitting orientation)
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
Air Distribution Manifolds
These manifolds are designed to allow for the distribution of airflow from one or more
air dryers to multiple pipe and flow panels. Versatile installation and fitting combinations
allow these manifolds to be easily configured to meet the customers’ specific requirements.
P09400 - Ten Port Distribution Manifold
•
•
•
•
•
•
•
Connect up to (10) 1/2” tubing distribution lines
(2) 3/4” FPT Inlet ports
(2) Inlet shutoff valves and fittings to connect to 1/2” tubing or 3/4” hose (1” optional)
1/8” FPT pressure testing port
Maximum operating pressure - 30 PSI
Can be wall mounted or installed on a 23” equipment rack
Mounting Dimensions - 7” H x 23” W x 5” D (additional clearance dependent on fitting orientation)
P01718 - Twenty Port Distribution Manifold
•
•
•
•
•
•
•
•
R0413
Connect up to (20) 1/2” tubing distribution lines
(5) 3/4” FPT Inlet ports
(2) Inlet shutoff valves and fittings to connect to 3/4” hose standard (1” optional)
Expandable up to (5) usable Inlet ports
1/8” FPT pressure testing port
Maximum operating pressure - 30 PSI
Can be wall mounted or installed vertically on an equipment rack
Mounting Dimensions - 6” H x 42” W x 4.75” D (additional clearance dependent on fitting orientation)
PUREGAS, LLC
800-521-5351
www.puregas.com
Page 30
4-Port Pressure Manifolds
These Manifolds are designed to allow for a single source of dehydrated air to be distributed
to multiple points. Versatile installation allows Manifolds to be joined together for additional
distribution points. Multiple configuration options are available to meet the customers’
specific requirements.
PWM4 - Manifold
PWM4G - Manifold w/ Pressure Gauges
•
•
•
•
•
•
3/8” Press-Lock outlet ports including 1/4”
Press-Lock reducers
Individual shutoff valves
3/8” Press-Lock inlet port
3/8” FPT port plus fittings for expansion to
additional Manifolds
•
•
•
Pressure Gauges - 0-10 PSI / 0-68 KPa
3/8” Press-Lock outlet ports including 1/4”
Press-Lock reducers
Individual shutoff valves
3/8” Press-Lock inlet port
3/8” FPT port plus fittings for expansion to
additional Manifolds
PWM4GC - Manifold w/ Pressure
Gauges and Check Valves
•
•
•
•
•
•
Page 31
Check Valves to prevent back feed
Pressure Gauges - 0-10 PSI / 0-68 KPa
3/8” Press-Lock outlet ports including 1/4”
Press-Lock reducers
Individual shutoff valves
3/8” Press-Lock inlet port
3/8” FPT port plus fittings for expansion to
additional Manifolds
PUREGAS, LLC
PWM4GU - Pressure Gauge Upgrade Kit
For P550WH / P1500WH Series Dehydrators
•
•
800-521-5351
Pressure Gauges - 0-10 PSI / 0-68 KPa
Fittings to install Gauges to existing Manifold
www.puregas.com
R0413
Field Manifolds
PPEC723 - Manifold Assembly
This manifold is designed to allow for the
connection of plastic tubing from up to 5 Cables
to an Air Pipe in the field.
•
•
•
•
•
•
1/4” FPT Inlet
(5) Outlet Ports to connect to 3/8” O.D. Tubing
g
Individual shut off valves for each Outlet Port
Individual testing ports for the Pressure of each
Outlet
Additional testing valve for Manifold Pressure
Brass/Tin or Cadmium plated
Hi-Valve Connecting Manifolds
These manifolds are designed to provide a
convenient pressure measurement point for
up to 5 Cables / Air Pipes in the field.
•
•
•
•
Available in Single or 5 Connection models
Ports connect to 3/8” O.D. Tubing
Individual Pressure testing ports
Brass/Tin or Cadmium plated
Part No.
PPEC720A
R0413
Connections
PPEC720A
5
PPEC720B
1
PPEC720B
PUREGAS, LLC
800-521-5351
www.puregas.com
Page 32
Monitoring System
Cross-Connect Blocks
PUREGAS offers a variety of Cross-Connect Blocks for connecting multiple points of
measurement (transducers, binary inputs) to your Monitoring System.
P011847 - 100 Pair Block
Connect up to 100 points of measurement (transducers,
binary inputs). Connect to your Monitoring System using
up to four (4) of the available Amphenol Cable ports
carrying 25 points each.
P011847-50 - Fifty Pair Block
Connect up to 50 points of measurement (transducers,
binary inputs). Connect to your Monitoring System using
up to two (2) of the available Amphenol Cable ports
carrying 25 points each.
P011847-25 - Twenty-Five Pair Block
Connect up to 25 points of measurement (transducers,
binary inputs). Connect to your Monitoring System using
the single Amphenol Cable port.
P011847-25S - Twenty-Five Pair Block (Square)
Connect up to 25 points of measurement (transducers,
binary inputs). Connect to your Monitoring System using
the single Amphenol Cable port. Cover included.
Page 33
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
Monitoring System
Communication & Jumper Boards
Puregas offers a number of additional boards which allow you to get the most out of
your Monitoring System as well as allow for direct Plug-&-Play replacement of your old
monitoring system without the need to perform costly, time-consuming rewiring.
PVD52 - Modem
Compatible with all PUREGAS Monitoring Systems as well as
a direct replacement for older Sparton modems still in use
with the PVD855 Control Board Upgrade for Sparton
Systems.
PVD53 - Optical Isolator
Allows the PVD855 Control Board Upgrade for Sparton
Systems to monitor PUREGAS devices such as Dryers, Panels
and more.
Can be installed in the PUREGAS PVD800V Modular Monitoring
System to double its device monitoring capabilities.
Subscriber Conversion Jumper Boards
These Jumper Boards facilitate the use of Sparton
5301, 5310, and 530X system’s existing Subscriber
Transducer Module cabling to be used with a
PUREGAS Monitoring System without the need to
rewire your Transducers.
Part No.
R0413
# of Boards
PVD800VJ1
1
PVD800VJ2
2
PUREGAS, LLC
800-521-5351
www.puregas.com
Page 34
Power Supplies
PUREGAS offers a selection of Power Supplies, Fuse Panels and Boost Transformers to make
sure that you have the required power available for your Pipe & Flow Panels, Monitoring
System and Air Dryers.
PVDP5 - 48 VDC Rectifier / Fuse Panel
PVD48VT - 48 VDC Power Supply
•
48 VDC power rectifier
•
5 circuit distribution panel using industry
standard GMT fuses
•
When 48 VDC power is not available, plug in
indicators
this converter to a nearby 110 VAC outlet.
•
PVDP20 - 48 VDC Fuse Panel
•
Front panel OK/FAIL & BLOWN FUSE LED
Low profile 1.75” chassis
P010709 - Boost Transformer
20 circuits for the distribution of 48 VDC
power, each individually protected by a GMT
style telecommunication fuse
•
Alarm circuits are provided to indicate alarm
conditions when faults occur
•
Normal operation LED’s are provided to
indicate the status of each bus in the panel
•
2 isolated groups (Busses) of 10 GMT fuses
each (15 Amps/GMT position)
•
Can be used to boost insufficient incoming AC
Voltage to the recommended range required to
operate your Air Dryer most efficiently.
Can operate at 200 Amps of output current
per panel (100 Amps per Bus)
Page 35
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
Tubing, Hose & Pipe
Tubing & Accessories
Sized By
Tube O.D.
Tube
I.D.
Color
Material
Wall
Thickness
Working
Pressure
at 73ºF (PSI)
P010443
1/8”
.093”
Natural
Nylon
.016”
250
P15411
1/8”
.091”
Natural
Nylon - Rigid
.017”
425
P010161F4
1/4”
.180”
Black
Nylon
.035”
250
PMP25A39
1/4”
.170”
Black
Polyethylene
.040”
120
P03697
1/4”
.170”
Natural
Polyethylene
.040”
120
P010161F6
3/8”
.275”
Black
Nylon
.050”
250
PMP26A20
3/8”
.25”
Black
Polyethylene
.062”
125
P03698
3/8”
.25”
Natural
Polyethylene
.062”
125
P010123
3/8”
.25”
Clear
Polyethylene
.0625”
125
P010161F8
1/2”
.375”
Black
Nylon
.062”
250
P09730
1/2”
.375”
Natural
Nylon
.062”
250
PPEC430C
1/2”
.375”
Black
Polyethylene
.062”
90
P04002
1/2”
.375”
Clear
Polyethylene
.0625”
85
Part No.
Multi-Tube (Plastic)
Plastic Tube Rack
Part No.
Tube
O.D.
Part No.
Tube
O.D.
# of
Tubes
PPEC429A
1/4”
PPEC431A
1/4”
3
3/8”
PPEC431B
1/4”
5
PPEC431C
1/4”
10
PPEC432A
3/8”
3
PPEC432B
3/8”
5
PPEC432C
3/8”
10
PPEC429B
Hose
Part No.
Hose O.D.
Sized By
Hose I.D.
Color
Material
Wall
Thickness
Working
Pressure
at 73ºF (PSI)
P06872
.78”
.5”
Black
Rubber Hose
n/a
250
P07490
1.030”
.75”
Black
Rubber Hose
n/a
250
P09211
1.031”
.75”
Clear
PVC Polyester Braided
.14”
150
P09114
1.30”
1”
Clear
PVC Polyester Braided
.14”
125
Pipe & Accessories
Air Pipe (Gas Feeder Pipe)
• Aluminum lined
• Black polyethylene
• Minimum order - 500 feet
R0413
Part No.
Pipe
O.D.
PPEC701
3/4”
PUREGAS, LLC
B Style Pipe Shaper
Wooden-handled mandrel designed
for inserting into the PPEC701 Air
Pipe to shape the bore of the pipe
so it will accept the various fittings.
800-521-5351
Part No.
P01603
www.puregas.com
Page 36
Mounting Panels
P011265 - 23” Mounting Panel
This mounting panel allows you to install your Mini
Monitoring Module or Air Dryer Cycling Module on a
standard 23” Wide equipment rack. It has all the cable
access ports necessary to ensure a neat and clean
installation. 23”W x 7”H
P0112659 - 19” Mounting Panel
Slightly smaller than the 23” version, this mounting panel
allows you to install your Mini Monitoring Module or Air
Dryer Cycling Module on a standard 19” Wide equipment
rack. It has all the cable access ports necessary to ensure
a neat and clean installation. 19”W x 7”H
P011180 - 7” Blank Panel
This panel can be used as a spacer for separating rack
equipment or used for custom mounting of additional
components in a 23” rack space. 23”W x 7”H
P011181 - 3.5” Blank Panel
This blank panel can be used as a spacer to separate
rack equipment, such as PVD820 Digital Flow Panels,
allowing for easier access for servicing the equipment.
23”W x 3.5”H
P011182 - Digital Pipe Panel Spacer
This spacer panel is used for mounting an individual
Digital Pipe Panel in a 23” rack space. 11.5”W x 7”H
Page 37
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
Equipment Racks &
Dehydrator Mounting Brackets
P8457 - 23” Wall Mounted Equipment Rack
This wall mounted rack is hinged on one side, allowing for
easy installation of and access to your equipment.
23”W x 7”H x 12”D
P0395023BLK - 23” Equipment Rack
This rack has #12-24 mounting holes on the front & back
and has ample space for mounting your equipment. It can
be secured to the floor of your office and includes #12-24
hardware. 23”W x 84”H
P011674 - Universal Rack Mounting Kit
This rack mounting kit allows you to install your P550W or
P1500W Series Air Dryer on a standard 19” OR 23” Wide
equipment rack. It includes all the hardware necessary for
quick, easy installation.
P011773 - Wall Mounting Kit
This wall mounting kit allows you to install your P550W
or P1500W Series Air Dryer to the wall of your office. It
includes all the hardware necessary for quick, easy
installation.
R0413
PUREGAS, LLC
800-521-5351
www.puregas.com
Page 38
Measuring & Alarm Instruments
Digital Pressure Gauge
The latest technology in reliable, solid state circuitry and durable, high
impact plastics, enables telephone maintenance craftsmen to take quick,
accurate LCD display pressure readings at air dryer locations and at any
pressure testing point in the cable network. Ranges of 0-30 PSIG and 0-100
PSIG at 0.01 PSIG resolution with 1.0% of full scale static accuracy.
Part No.
Range
PDG30
0-30 PSIG
PDG100
0-100 PSIG
P06717 - Pressure Gauge (Low Pressure)
Enables telephone maintenance craftsmen to take pressure readings at air
dryer locations and at any pressure testing point in the cable network.
Range of 0-15 inches of water (0.35-0.54 PSIG).
PPEC546 - Portable Flow-Rater
The PUREGAS portable flow-rater provides accurate and instantaneous
flow rate of air entering cable at any location equipped with proper test
valve. Gives flow readings from 0.2 SCFH to 20.0 SCFH. Has two 6’ lengths
of clear vinyl tubing with easy snap-on air chucks.
PH200 - Digital Humidity Meter
Portable, battery operated instrument to test relative humidity levels in
pressurized cable. Can be used to test moisture levels at the air dryers.
Included is the PH201 sensor which when used with the meter, permits the
operator to sample moisture levels throughout the cable network. The units
are housed in a durable carrying case.
PPEC560A - Humidity Alarm Kit
Can be installed in a dry air system to continuously monitor humidity
levels. In the event of a high humidity condition, this kit will automatically
give an audible and visual alarm and will simultaneously bypass the wet air
to the atmosphere, preventing moisture from entering the cable system.
Page 39
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
Additional Accessories
PPEC548 - Moisture Separator / Manual Dryer
• Easily and quickly serviced
• Color change of the desiccant
provides an instant status of
the compressed air system
• No power required
• Includes 1.6 lbs desiccant
(Silica Gel)
P8525 - Pressure Shut Off Valve
This versatile indoor valve controls
flow to an individual cable without
blocking flow to adjacent valves
or cables. Neoprene diaphragm
(toggle actuated) bears against
a smooth brass seat for positive
closure.
PPEC725 - By-Pass Valve
Equipped with a shut off valve
which is used for constructing a
by-pass across a pressure plug
using 3/8” O.D. plastic tubing.
• 3/8” O.D. tube fittings
• Brass/Tin or Cadmium Plated
PPEC506 - Valve Repair Tool
Multi-purpose design includes
wrench to remove valve cores, tap
and tread-cutting die to remove
burrs from valve stem threads. Can
be used to install valve into cable
sheath.
R0413
PUREGAS, LLC
Pressure Testing Hose
Designed to move gas from a
pressure testing regulator to an
inlet valve.
• Snap-on chuck
• 1/4” coupling
Part No.
Length
P08206
2.5’
PPEC507A
8’
Cable Buffering Hose & Kit
Used as a pneumatic jumper
between the pipe valve and
cable valve to provide a buffering
pressure source to a cable during
splicing activity
• Screw type chuck
• 5’ long
Part No.
PPEC729 - Hose only
PPEC730 - Hose, 6 tags/ties
PPEC724A -Automatic Shut Off (Check) Valve
Designed for installation between
air pipe and the manifold assembly
to protect cable pressures when
breakage or other damage to
the feeder pipe threatens loss of
pressure.
• 1/8” FTP port
• 1/8” MPT connector
• Brass/Tin or Cadmium Plated
800-521-5351
www.puregas.com
Page 40
Press-Lock Fittings
Male Connector
Male Run Tee (Swivel)
Part No.
Tube
O.D.
MPT
Part No.
Tube
O.D.
MPT
P05852F2
1/8”
1/8”
P05941F1
1/8”
1/8”
P05852F3
1/8”
1/4”
P05941F3
1/4”
1/8”
P05852F7
1/4”
1/8”
P010395
1/4”
1/4”
P05852F8
1/4”
1/4”
P011438
1/4”
3/8”
P05852F9
1/4”
3/8”
P011278
3/8”
1/4”
P05852F11
3/8”
1/8”
P05941F8
3/8”
3/8”
P010379
3/8”
1/4”
P05941F9
1/2”
3/8”
P011067
3/8”
1/2”
P05941F10
1/2”
1/2”
P05852F13
1/2”
1/4”
P05852F12
1/2”
3/8”
P05852F10
1/2”
1/2”
Part No.
Tube
O.D.
MPT
P011277
1/4”
1/4”
P012288
3/8”
1/4”
P012289
1/2”
1/4”
Male Branch Tee (Swivel)
Female Connector
Part No.
Tube
O.D.
FPT
P05940F1
1/8”
1/8”
P05940F4
1/4”
1/8”
P05940F5
1/4”
1/4”
P05940F8
3/8”
1/4”
P05940F9
3/8”
3/8”
Female Union Tee
Male Elbow (Swivel)
Part No.
Tube
O.D.
MPT
P05851F1
1/8”
1/8”
P011007F13
1/8”
1/4”
P05851F2
5/32”
1/8”
P05851F4
1/4”
1/8”
P05851F5
1/4”
1/4”
P05851F10
3/8”
1/8”
P05851F6
3/8”
1/4”
P05851F8
3/8”
3/8”
P011007F8
3/8”
P011007F7
Part No.
Tube
O.D.
P011891
3/8”
Reducer
Part No.
P012111
FROM
Tube
O.D.
TO
Tube
O.D.
3/8”
1/4”
Plug
Part No.
Tube
O.D.
1/2”
P011791
3/8”
1/2”
1/4”
P012174
1/2”
P05851F7
1/2”
3/8”
P011007F9
1/2”
1/2”
Female Union Elbow
Page 41
Part No.
Tube
O.D.
P011007F12
3/8”
PUREGAS, LLC
800-521-5351
www.puregas.com
R0413
Pipe Fittings
Nipple (Close)
Adapter
Part No.
MPT
Part No.
FPT
MPT
P1250
1/8”
P01577
1/8”
1/8”
P011170F023
1/4”
PMP25A1
1/4”
1/8”
M038481
3/8”
PAM62T1202
1/4”
1/4”
P5000135P
1/2”
PS420
3/8”
1/4”
P09204
3/4”
PPEC407C
1/2”
3/8”
P09803
3/4”
1/2”
P010780
3/4”
3/4”
Nipple (Long)
Part No.
MPT
Length
PB212
1/8”
1.5”
P011170F054
1/8”
2”
Part No.
FPT
MPT
P3196
1/8”
2.5”
P7355
1/8”
1/4”
P011170F043
1/8”
3/8”
P010066
1/8”
1/2”
P08724
1/8”
3/4”
P5000125E
1/4”
3/8”
PMP26A13
1/4”
1/2”
PS360
1/4”
3/4”
P1290
3/8”
1/2”
PS318
3/8”
3/4”
P011439
3/8”
1”
P8941
1/2”
3/4”
P011170F047
1/2”
1”
P07290
3/4”
1”
P08568
1”
1-1/4”
P011125
(Stainless)
1/4”
7/8”
P7428
1/4”
1.5”
P011126
(Stainless)
1/4”
1.5”
P5000522C
1/4”
2”
PAM038252
1/4”
2.5”
P7468
1/4”
3”
P5000522B
1/4”
3.5”
P07706
3/8”
2”
P3796
3/8”
3”
P3243
1/2”
2.5”
P3948
1/2”
3”
P010081
3/4”
2.5”
P05465
3/4”
3”
1”
4.5”
P011113
Bushing
Coupling
Nipple (Hex)
Part No.
MPT
PTM3
1/8”
P5000107
1/4”
P5000102
3/8”
P50001226
1/2”
P3232
3/4”
P08576
FPT
P7469
1/8”
PS161
1/4”
P8862
3/8”
P011316
3/4”
Coupling (Reducing)
1”
Nipple (Reducing)
R0413
Part No.
Part No.
MPT
MPT
PMP25A55
1/4”
1/8”
P05866
3/8”
1/8”
P1317
3/8”
1/4”
P010256
1/2”
3/8”
P09822
3/4”
1/2”
PUREGAS, LLC
800-521-5351
www.puregas.com
Part No.
FPT
FPT
P011170F016
1/4”
1/8”
P3952
3/8”
1/4”
P011170F045
1/2”
3/8”
Page 42
Pipe Fittings
Elbow (Male)
Tee (Branch)
Part No.
MPT
Part No.
FPT
MPT
P011170F024
1/8”
P4164
1/8”
1/8”
P011170F025
1/4”
P4087
1/4”
1/4”
P011170F026
3/8”
P3661
3/8”
3/8”
P011170F027
1/2”
P011170F031
1/2”
1/2”
Elbow (Male 90º SAE FL45)
Tee (Street)
Part No.
FPT
SAE
Part No.
FPT
MPT
P1287
1/4”
1/4”
PMP25A89
1/8”
1/8”
P1288
1/4”
3/8”
P7491
1/4”
1/4”
P15338
3/8”
5/8”
P3659
3/8”
3/8”
P8984
1/2”
5/8”
P01812
1/2”
1/2”
P06873
3/4”
5/8”
P06940
3/4”
3/4”
1”
1”
P011114
Tee (Branch SAE FL45)
Elbow (90º Union)
MPT
SAE
1/4”
1/4”
1/2”
5/8”
Part No.
FPT
P1292
P50001265
1/8”
P3241
PS270
1/4”
P3938
3/8”
Part No.
FPT
P5000136
1/2”
PB079
1/8”
PS164
1/4”
Tee (Union)
Elbow (90º Street)
Part No.
FPT
MPT
PS401
3/8”
PAT1787
1/8”
1/8”
P011170F028
1/2”
P50001554
1/4”
1/8”
P15438
3/4”
P08565
1”
Part No.
FPT
P9106
1/8”
MPT
PS163
1/4”
3/8”
1/2”
PL1291
1/4”
1/4”
P3231
3/8”
3/8”
P3303
1/2”
1/2”
P011170F048
3/4”
3/4”
Cross
Elbow (45º Street)
Part No.
FPT
P010259
1/8”
1/8”
P09221
P8417
1/4”
1/4”
P011170F032
P011170F029
3/8”
3/8”
Male Connector (SAE FL45)
P011170F030
1/2”
1/2”
Part No.
MPT
SAE
P5000610
1/4”
1/4”
SAE
P1295
1/4”
3/8”
1/4”
5/8”
FL45
P500014114
3/8”
1/2”
P3246
1/2”
5/8”
3/4”
3/4”
FL37
P010423
1/2”
3/4”
3/4”
5/8”
3/4”
3/4”
FL45
P3799
P01693
3/4”
3/4”
1”
1”
FL37
1”
1”
Elbow (Male 45º SAE)
Part No.
P010377
P08651
P08945
P011209
Page 43
Part No.
MPT
PUREGAS, LLC
800-521-5351
P011229
www.puregas.com
R0413
Pipe Fittings
Plug (Square Head)
Plug (Hex Head)
Part No.
MPT
Part No.
MPT
PS249
1/8”
P04030
1/8”
P011170F018
1/4”
PPEC727
1/4”
P011170F019
3/8”
P09030
3/8”
P50001013
1/2”
P011170F020
1/2”
P08223
3/4”
P02702
1”
Part No.
MPT
PMP26A15
1/8”
P02985
1/4”
P011170F022
3/8”
P2408
3/4”
Plug (Countersunk)
Barbed Fittings
Hose Barb to Male Pipe
Hose Barb to Female Pipe
Part No.
Tube
I.D.
MPT
Part No.
Tube
I.D.
FPT
P05363
1/4”
1/8”
P011170F040
1/4”
1/4”
P06794
1/4”
1/4”
P011170F041
1/2”
1/2”
P011170F051
3/8”
1/4”
P011170F042
3/4”
3/4”
P011170F034
1/2”
1/2”
p011170F050
1/2”
3/4”
P011170F017
3/4”
1/2”
Part No.
Tube
I.D.
MPT
P011170F033
3/4”
3/4”
P011170F035
1/4”
1/4”
P09116
1”
3/4”
P011170F036
1/2”
1/2”
P08541
1”
1”
Hose Barb to Male Pipe (Swivel)
Hose Barb to Female SAE 45 (Swivel)
Hose Barb 90º Elbow to Male Pipe
R0413
Part No.
Tube
I.D.
MPT
P011170F037
1/4”
1/8”
P07001
1/4”
1/4”
P011170F052
3/8”
3/8”
P011170F038
1/2”
1/2”
P011170F039
3/4”
3/4”
PUREGAS, LLC
800-521-5351
www.puregas.com
Part No.
Tube
I.D.
SAE
P06856
1/2”
5/8”
P07491
3/4”
3/4”
Page 44
Compression Fittings (Plastic Tube)
Male Run Tee
Union
Part No.
Tube
O.D.
Part No.
Tube
O.D.
MPT
PPEC421A
1/4”
PMP25A77
1/4”
1/8”
PPEC421B
3/8”
PPEC422B
1/4”
1/4”
PPEC421C
1/2”
PMP26A25
3/8”
1/4”
PPEC422D
1/2”
3/8”
Part No.
Tube
O.D.
FPT
P011170F005
1/4”
1/8”
P011170F006
1/4”
1/4”
P011170F007
1/4”
3/8”
Union (Reducing)
Part No.
Tube
O.D.
Tube
O.D.
P07525
1/4”
3/8”
Female Branch Tee
Male Connector
Part No.
Tube
O.D.
MPT
PMP25A19
1/4”
1/8”
PS297
1/4”
1/4”
PMP26A19
3/8”
1/8”
Part No.
Tube
O.D.
MPT
PMP25A49
3/8”
1/4”
PMP25A30
1/4”
1/8”
P08349
3/8”
3/8”
P1336
1/4”
1/4”
P011183
1/2”
1/4”
PMP25A45
1/4”
3/8”
PMP25A57
1/2”
3/8”
PMP25A44
3/8”
1/8”
PMP25A43
3/8”
1/4”
P06842
3/8”
3/8”
PS429
1/2”
3/8”
Male Elbow
Female Connector
Part No.
Tube
O.D.
FPT
P05449
1/8”
1/8”
P8513
1/4”
1/8”
P02879
1/4”
1/4”
Part No.
Tube
O.D.
FPT
PMP26A18
3/8”
1/4”
P4310
1/4”
1/8”
P3135
1/2”
3/8”
PDPP25A6
1/4”
1/4”
P3382
3/8”
1/4”
P05865
1/2”
3/8”
Female Elbow
Union Tee
Part No.
Tube
O.D.
P3764
1/4”
PPEC424B
3/8”
PPEC424C
1/2”
Nut (Brass)
Male Branch Tee
Tube
O.D.
P3969
1/4”
P011170F001
3/8”
P011170F002
1/2”
Part No.
Tube
O.D.
MPT
PPEC423A
1/4”
1/8”
PDPP25A7
1/4”
1/4”
Part No.
Tube O.D.
P8550
3/8”
1/8”
P3970
1/4”
P3487
3/8”
1/4”
PMP25A84
3/8”
3/8”
PPEC425C
1/2”
PPEC423D
Page 45
Part No.
1/2”
PUREGAS, LLC
Sleeve (Plastic)
800-521-5351
www.puregas.com
R0413
Compression Fittings (Plastic Tube)
Nut & Sleeve
Cap (Plastic)
Part No.
Tube
O.D.
Part No.
Tube
O.D.
P011031
1/4”
P011170F044
1/8”
P01768
3/8”
PMP25A80
1/4”
P06840
1/2”
PMP26A16
3/8”
PPEC427C
1/2”
Valve Fittings
Needle Valve (Compression - Male Pipe)
Needle Valve (Male Pipe - Female Pipe)
Part No.
Tube
O.D.
MPT
P011170F008
1/4”
1/8”
Part No.
MPT
FPT
P011170F009
1/4”
1/4”
P010503
1/8”
1/8”
P011170F010
3/8”
1/4”
Ball Valve (Female Pipe - Female Pipe)
Needle Valve - Angle (Compression - Male Pipe)
Part No.
Tube
O.D.
MPT
P011170F011
1/4”
1/8”
P3757
1/4”
1/4”
P08398
3/8”
1/4”
FPT
P011170F012
1/4”
P07186
3/8”
PV1034
1/2”
P09648
3/4”
P02700
1”
Ball Valve (Male Pipe - Female Pipe)
Needle Valve (Male Pipe - Male Pipe)
Part No.
MPT
Part No.
MPT
FPT
P011170F014
1/8”
P012103
1/2”
1/2”
P011170F015
1/4”
P012104
3/4”
3/4”
Needle Valve (Female Pipe - Male Pipe)
R0413
Part No.
Check Valve
Part No.
FPT
MPT
P011170F003
1/8”
1/8”
P011170F004
1/4”
1/4”
PUREGAS, LLC
800-521-5351
www.puregas.com
Part No.
FPT
P012102
1/2”
P07228
3/4”
P07229
1”
Page 46
Underground Air Pipe Fittings
Brass/Tin or Cadmium Plated
B Type Male Connector
E Type Union (1/8” FPT Port)
Part No.
Pipe
O.D.
MPT
PPEC714
1/4”
1/8”
Part No.
Pipe
O.D.
FPT
PPEC715
3/8”
1/8”
PPEC705
3/4”
1/4”
P012472
3/8”
1/4”
F Type Union (1/8” FPT Port)
C Type Male Elbow
Pipe
O.D.
3/4”
Part No.
Pipe
O.D.
MPT
PPEC702
PPEC716
1/4”
1/8”
F Type Pressure Testing Valve
PPEC717
3/8”
1/8”
C Type Union (1/4” FPT Port)
Part No.
Pipe
O.D.
PPEC703
3/4”
Part No.
Thread
PPEC503
1/4-20
Part No.
MPT
PPEC501
1/8”
F Type Tee
C Type Pressure Testing Valve
Part No.
FPT
MPT
PPEC726
1/8”
1/8”
F Type Flange Fitting
• For use at pressure reading points,
bypasses, or air inlets on any 3/4”
or larger cable
C Type Flange
Part No.
FPT
PPEC401
1/8”
Part No.
FPT
PPEC426A
1/8”
G Type Union (1/8” FPT Port)
C Type Flange Plug
Part No.
Pipe
O.D.
MPT
PPEC704
3/4”
1/4”
P09029
3/4”
1/2”
Part No.
MPT
PPEC403
1/8”
Part No.
Pipe
O.D.
Part No.
PPEC504
M
PPEC718
1/4”
PPEC505
R
PPEC719
3/8”
D Type Union
Page 47
Part No.
PUREGAS, LLC
Valve Cap
800-521-5351
www.puregas.com
Type
R0413
Service & Repair
Only PUREGAS can offer Factory Direct Rebuilds & Repairs Backed by a 6 Month Warranty
• Quick turnaround time (2 weeks in most cases)
• Estimates available upon request
• $125 minimum service charge
Compressor Rebuild
Liquid Ring Type Compressors
Piston Type Compressors
Replace:
Motor Bearings
Seals & Gaskets
Impeller & Cone
Replace:
Motor Bearings
Piston Rod Assemblies
Complete Maintenance Kit
All Manufacturers
Test:
Air Flow
Air Pressure
Electrical Performance
Heatless Dryer Rebuild
Desiccant Tower Repacking
Replace:
Desiccant Towers
O-Rings
Check Valves & Springs
Complete Solenoid Assembly
Test:
Proper Dewpoint
Component Operation
20”
12”
9”
6”
Circuit Board Repair (PUREGAS Boards Only)
Control Boards
Display Boards
Humidity Boards
Cycle Kit / Interface Boards
Complete Dryer & Component Repair
Central Office Dryers
Mobile Air Systems
Remote Dryers
Antenna Dehydrators
4-Way Valve Assemblies
Refrigeration Units
Heaters & Ventilators
To initiate a repair or rebuild transaction:
•
•
•
•
•
Contact our Service Department at 1-800-521-5351, option 3 to obtain a Return Authorization (RA) number
Carefully package the item(s) to be returned (Shipping Cartons available)
Mark the Return Authorization number on the outside of the shipping container
Include the main address and phone number of the individual to contact if the item cannot be economically repaired
Include the purchase order number
R0413
PUREGAS, LLC
800-521-5351
www.puregas.com
Page 48
1-800-521-5351
PUREGAS, LLC
Fax - (303) 657-2233
226A Commerce Street
Broomfield, Colorado 80020
info@puregas.com
www.puregas.com
Inside Sales / Parts
Our Inside Sales Team is available to answer your questions and assist in making your parts / sales selection.
1-800-521-5351 (option 2)
Fax - (303) 657-2205
sales@puregas.com
parts@puregas.com
Service Repair / Rebuild
Only PUREGAS can offer repairs & rebuilds that are backed by the PUREGAS factory direct warranty. For your
confidence and the reliability of your equipment, let the experts at PUREGAS get your equipment performing like
new. We offer a variety of service options for your Antenna Pressurization / Waveguide Products including our Tower
Repacking Program.
1-800-521-5351 (option 3)
Fax - (303) 657-2205
service@puregas.com
Technical Support
PUREGAS has an expert staff of Technical Support Representatives available to assist you in keeping your equipment
running as it should. Our Representatives are ready to answer your technical questions during office hours from
8:00 a.m. to 4:00 p.m. Mountain Standard Time as well as after-hours when your call will be forwarded to our on
call Technician.
1-800-521-5351 (option 1)