Camos | BHS-600 | Instruction manual | Camos BHS-600 Instruction manual

Instruction manual BHS-500 / BHS-600
Headset for Wireless Communication via Bluetooth Technology
28
Preliminary Remarks
Thank you for purchasing this product.
Please read this instruction manual thoroughly for proper usage and application before connecting and operating the equipment.
CAMOS owns all intellectual property rights including copyright on the instruction manual,
hardware and related software of the BHS-500 and BHS-600 which will be protected by Copyright Act. Without CAMOS‘s written permission, they cannot be copied, re-printed or translated
into other languages.
Designs and specifications are subject to change without prior notice.
If you find any strange occurences or malfunction in the product
or any foreign substance gets into the product, please contact
the authorized retailer where you purchased the product.
1
Warranty
The manufacturer would not take any responsibilty on the sales of products nor entrust the
responsibilities to the 3rd party. Product warranty shall not apply to any failure or malfunction
which results from improper maintenance, operation or unauthorized modification of the product.
During the warranty period, Camos does not warrant the repairing of the products resulting
from any of the following circumstances:
1) Improper maintenance
2) Modification or replacement of parts in the user‘s disposition
3) Using improper power source
4) Natural disaster including flood, fire and earthquake
5) Replacement of expendable parts
The warranty only covers the manufactured goods. If there are any repairs after the warranty
period is finished, the repairs will be charged to the user. Please contact the distributor and
service center for A/S.
2
Safety Rules
Important warnings
Do not use the product in a bathtub. Do not pull the plug with wet hands.
This may cause an electric shock.
Do not use unapproved power voltage.
This may cause fire or electric shock.
Do not use a damaged electric cord.
This may cause fire and (or) electric shock.
Be careful when thunder and lightening occurs.
There is a danger of electric shock.
Do not attempt to open, disassamble or repair the product by any person except an authorized service dealer.
This may cause an electric shock and/or malfunction. You should request an authorized
service dealer for any inspection and repair of the product.
Do not put pins or needles into the product or the electric cord of the product.
If this happens, stop the operation of the product immediately. Continous use may cause
fire, electric shock and/or malfunction.
Stop using the product immediately when you drop it or damage the outside shell.
Continous use may cause fire, electric shock and/or malfunction.
Often clean the product.
Dust in the area may cause fire.
3
Regulatory Information
FCC compliance Information
This device complies with part 15 of FCC Rules. The operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received.
Including interference that may cause undesired operation.
User information
This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio Frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are expressly approved in the instruction manual. The user
could lose the authority to operate this equipment if an unauthorized change or modification is made.
Hereby, CAMOS Co.Ltd., declares that this BHS-500 and BHS-600 are in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
4
Content
BHS-600
Introduction
Box content
Recharge battery
Function overview
Product description
Key functionalities
LED Signals
Headset mounting/dismounting
6
7
8
9
10
12
14
Intercom functionality
Intercom functionality during
listening to music
Making a call during
listening to music
Making a call during intercom
conversation
Settings
Headset power on/off
Headset registrations & connections
15
16
Appendix
Battery recharge time
Headset specifications
Functions
BHS-500 & 600
Accept call
Make a call
Play music
20
20
22
5
23
23
24
26
26
27
Introduction
Box content
Headset Box
Bracket A
with tape
Bracket B
with clip
Recharger 5V
Additional:
Instruction manual
Double-sided adhesive tape
Earphones
1 microphone for Full-face helmet
1 microphone for Jet/Flip-up helmet
6
Recharge battery
The original headset is equipped with a Li-Polymer rechargable battery. Before using the
headset for the first time, completely recharge the battery. The recharge time of the battery is
two hours.
1) Charging
Only recharge the unit with the included 5V recharger. Connect the headset to the charge
socket. The red LED will shine during recharging process.
2) End of recharging process
Recharge the battery for 2 hours. If the battery is full, the red light disappears automatically
Now disconnect the recharger from the headset box.
3) Empty battery signal
If the battery is almost empty, a signal will be heard. The signal disappears as soon as the
headset is connected to the recharger.
Only use the recharger included in the package! Other rechargers could damage the unit and
could result in a loss of guarantee.
7
Function overview
The unit includes the following functions:
Talk/Intercom functions (nur BHS-600)
Telephone functions
• Intercom functionality between driver &
passenger
• Automatic call detection
• Redialing
• Voice dialing / VOX
• Call acceptance during intercom functionality; at incoming call, the intercom
functionality will be muted automatically
• Finish call
• Interrupt intercom functionality
• Adjust volume
• Start intercom functionality
• Re-direct call to headset
Music functions
• Play music
• Stop music
• Adjust volume
8
Product description
Green LED
(only BHS-600)
Bracket A
Red LED
„+“ Key
„-“ Key
Bracket B
TALK-Key
Pairing Switch5
(CH1/CH2, only BHS-600 )
Reset-Key
Master/Slave Switch
(only BHS-600)
DC 5V
9
Key functionalities
Functionalities
No.
1
2
3
4
Key
Channel 1 (BHS-500 & 600)
•
Power on/off: Press key for 3 seconds
•
Minimize volume
•
Channel 2 (only BHS-600)
•
Minimize volume
Maximize volume
•
Power on/off: Press key for
3 seconds
•
Pairing BHS-500: Press the key for
3 sec. until the red LED is blinking
very fast
•
Mazimise volume
•
Redialing: Press key 1x
•
Re-direct call: Press key during ringing for 2 sec.
•
Voice dialing: Press key for 2 sec.
•
Finish call
•
BHS-600: Pairing channel 1
(Move switch to position CH1)
„-“ key
„+“ key
„T“ key
Pairing switch
(sideways)
10
•
Pairing channel 2
(Move switch to position
CH2)
Functions
No.
Key
5
Choose Master /
Slave for channel 2
(Switch sideways)
6
Reset Key
(Below CH1/CH2
switch)
7
„-“ & „ +“ Key
Channel 1 (BHS-500 & 600)
Channel 2 (nur BHS-600)
•
/
For pairing channel 2 change to
Master or Slave according to usage
Reset of all settings.
•
Play/stop music: Press both
keys together for 3 Sec.
11
•
Start/interrupt conversation: Press
both keys together for 3 Sec.
LED signals
Mode
Key
Key operation time
Display red LED
Display green LED
Activate
CH 1:
„-“ Key
3 sec.
Flashing for 2 sec., then
Stand-by mode
/
Activate
CH 2:
„+“ Key
3 sec.
/
Flashing for 2 sec., then
Stand-by mode
/
Every 100 ms 1x flashing/Sec.
Stand-by
/
Switch off
CH 1:
„-“ Key
2 sec. interval flashing, then
the LED will be turned off
/
Switch off
CH 2:
„+“ Key
/
2 sec. interval-flashing, then
the LED will be turned off
Fast flashing for 3 sec.;
Pairing failed : Flashing
1 x /Sec.
/
Pairing
Mode
Pairing
successful
Redialing
Re-direct
call
Pairing
switch
3 sec.
/
/
Flashing 2x /Sec.
/
„T“ Key
Press
shortly
/
/
2 sec.
/
/
„T“ Key
12
Mode
Key
Key operation
time
Display red LED
Display green LED
Voice dialing
„T“ Key
2 Sec.
Finish call
„T“ Key
Press shortly
/
/
/
/
Play music
„-“ & „ +“
Key
Press together
for 3 Sec.
/
/
Stop music
„-“ & „ +“
Key
Press together
for 3 Sec.
/
/
Low battery
status
/
/
Interval flashing every 3 Sec.
/
13
Headset mounting/dismounting
1. Fix bracket A backside or sideways on your helmet by using
the double sided adhesive tape
3. Alternatively to this you
can also use the clip
(bracket B) to mount
the helmet sideways
(see fig. 2)
14
2. Mount the headset box with the
bracket
Settings
Headset power on/off
The headsets will be switched on/off differently depending on the channel. If you want to switch
on the headset, please press the relevant key for 3 sec. If you press this key again, the headset
will be switched off.
CH 1
„-“ Key
„+“ Key
CH2
Power on: Press key for 3 sec.
Power off: Press key for 3 sec.
/
/
Power on: Press key for 3 sec.
Power off: Press key for 3 sec.
Volume
Press „+“ or „-“ key to change the volume. The volume can be changed at any time during
driving.
15
Headset registration & connection
To use the headset, you have to connect it to another wireless Bluetooth device. If this device
has a display, the headsets will be displayed as CAMOS BHS-600 or CAMOS BHS-500.
1.) Connect headset with mobile phone (Channel 1)
1a) BHS-500: Press the „-“ key to activate the headset. After this, press the „+“ key until the
red LED is blinking fast. Activate the Bluetooth function of your mobile phone
simultaneously.
1b) BHS-600: After the headset has been switched on, enable the headset on channel 1 (CH 1)
and press the „-“ key for 3 sec. Activate the Bluetooth function of your mobile phone
simultaneously.
2) Switch the pairing key of your headset from position CH1 for a short time to position CH2
and back to CH1.
3) The Pairing-Mode is now activated. Generally the mobile phone will ask for a four-digit code.
Most mobile phones accept 0000. In case this code is not accepted, please make use of your
mobile phones‘ manual. Once the devices are paired successfully they will keep on recogni
zing each other automatically.
Notes:
• If you want to listen to music via your mobile phone, please make use of your mobile phone‘s
instruction manual.
• If you want to disconnect your mobile phone, switch off the bluetooth function of your mobile
phone. The headset can now be linked to another bluetooth compliant device.
16
2.) Connect the headset with audio device (Channel 1)
1a) BHS-500: Press the „-“ key to activate the headset. After this, press the „+“ key until the
red LED is blinking fast. Activate the Bluetooth function of your audio device
simultaneously.
1b) BHS-600: After the headset has been switsched on, enable the headset on channel 1
(CH 1) and press the „-“ key for 3 sec. Activate the Bluetooth function of your mobile phone
simultaneously.
2) Switch the pairing key of your headset from position CH1 for a short time to position CH2
and back to CH1.
3) Please make use of the instruction manual of your audio device to see how to connect it to
the headset.
If you want to disconnect your audio device, switch off the bluetooth function of the device. The
next time you switch on both units simultaneously, they will be connected automatically.
3.) Activate the intercom function (Channel 2 / only BHS-600)
1) To activate the intercom function on channel 2, make sure that the relevant key has been
moved to the position „master“ at one of the headsets and on the other headset to the
position „slave“.
2) After you switched on both headsets, activate channel 2 (CH 2) by pressing the „+“ key on
both headsets for 3 Sec.
3) Switch the pairing key of your headsets from position CH2 for a short time to position CH1
and back to CH2. After a short fast blinking of the red LED, the headsets are connected.
17
4.) Connect Two Way Radio on channel 2 (only BHS-600)
Instead of intercom function you can link a two way radio which is equipped with a bluetooth
adapter.
1) Switch the headset‘s key in „Slave Mode“ position.
2) Switch the Pairing-key of your headset from position CH2 for a short time to position CH1 and
back to CH2.
5.) Connect mobile phone on channel 2 (only BHS-600)
If you don‘t need the intercom function the BHS-600 enables you to connect a mobile phone
on channel 2. Unlike channel 1 the mobile phone has to support Monofunction and has only
secondary priority.
1) During an incoming call while channel 1 is activated on your device, you will hear both
channels simultaneously.
2) To accept a call you have to say loud and clear „Hello“ to your microphone.Channel 1 will be
muted an you can start the conversation.
3) If you remain silent longer than 5 seconds, the device on channel 1 will be reactivated. To
mute channel 1 you have to say „hello“ again.
18
Important notes to 3
• Channel 1 can only be used for the connection to another Bluetooth device.
• Channel 2 is for intercom functionality between two wireless Bluetooth BHS-600 headsets.
• If you want to change the Bluetooth device on channel 1, you have to switch off the firstly
connected Bluetooth unit before you can connect it to another Bluetooth device.
• Once conntected, the paired Bluetooth devices will find each other automatically if the
Bluetooth functionality is activated on both units.
19
Functions
1.) Accept call
1) After you connected the headset with your mobile phone as described before, you can make
calls and accept them. (Please consider your local laws/road traffic regulations).
2) Both headsets, BHS-500 & 600, enbable automatic call acceptance with your mobile phone.
Please make sure that this functionality is also activated in your phone menu. Otherwise
thisfunctionality will not work.
3) To finish the call, shortly press the „T“ button.
2.) Make a call
1) Re-dialing
To activate the re-dialing, shortly press the „T“ button.
2) Re-direct call to your headset
• After finishing the dialing process, press the „T“ button for 2 sec. to re-direct the call to
your headset.
• You can redirect the call to your mobile phone by pressing the „T“ button again for 2 sec.
3) Voice dialing / VOX
Press the „T“ button for 2 sec. to activate the voice dialing. Before you can use this function,
you have to save all speech orders in your mobile phone.
20
Important notes
• Please study your mobile phone manual to make sure that your phone supports
voice dialing.
• If the connection between headset and mobile phone is interrupted because of an extremly
long distance between these two devices, the headset will autimatically try to reconnect the
systems within the next 30 minutes as soon as the two devices get nearer than 10 meters.
• When these 30 minutes are over, shortly press the „-“ or „+“ button again to automatically
reconnect the two devices. If this process failes, just switch the devices on and off to get the
connection again.
21
3.) Play music
1) Listening to music through mobile phone
a) Connect your headset with your mobile phone.
b) Activate the music function of your mobile phone. Please refer to the manual of your mobile
phone as well.
c) To stop the music, press both buttons, „-“ & „+“, for three seconds at the same time.
d) To start the music, press both buttons, „-“ & „+“, for three seconds at the same time.
Depending on your mobile phone, only MP3 files can be played through the headset.
2) Listening to music via audio device
a) Connect the headset with the audio device
b) Activate the music function of your audio device. Please compare to the manual of the audio
device as well.
c) To stop the music, press both buttons, „-“ & „+“, for three seconds at the same time.
d) To start the music, press both buttons, „-“ & „+“, for three seconds at the same time.
If you interrupt the music reception of your headset, the audio device won‘t be stopped automatically. The playing/interrupting of the music through pressing the „-“ & „+“ buttons at the same time
is only possible during music mode.
22
4.) Intercom functionality (only BHS-600)
a) After you connected both BHS-600 headsets, you can use the intercom functionality.
b) To stop the conversation, press both buttons, „-“ & „+“, for 1 second at the same time.
c) To go on with the conversation, press both buttons, „-“ & „+“, for 2 seconds at the same time.
5.) Intercom functionality while listening to music (only BHS-600)
a) Connect channel 1 with your mobile phone or audio device and activate the music.
b) Connect the two BHS-600 on channel 2.
c) As soon as the driver or passenger speaks into its microphone, channel 1 (music) will be
muted.
d) If there is no conversation for more than 10 sec., channel 1 will be automatically activated
again.
e) You can totally switch off the intercom functionality if pressing the „-“ & „+“ buttons for 1 sec.
at the same time.
f) To activate the intercom functionality again, just press the „-“ & „+“ buttons again for 1 sec. at
the same time.
23
6.) Incoming call while listening to music
1) Receiving a call and listening to music via mobile phone
Important note: This functionality is not possible with all mobile phones. Please check with
the manual of your mobile phone.
a) Connect your phone with your headset on channel 1.
b) At incoming call, the music will be automatically muted so that you can answer the call.
If you finish the call with the „T“ button, the music gets switched on automatically again. If the
telephone function gets activated with the „T“ button, the music stays muted. To listen to music as
well, press „-“ & „+“ button for 3 sec. at the same time.
2) Receiving a call during listening to music through another stereo-audio-device
You have the possibility to connect one Bluetooth mobile phone and one stereo-audio-device
on channel 1 of your BHS-500 & 600 headset which you can use at the same time.
a) Connect your mobile phone with your headset.
b) Disconnect them again.
c) Connect your headset with the Bluetooth stereo-audio-device and start the music.
d) Activate the Bluetooth mode of your mobile phone again.
e) If you receive an incoming call on your mobile phone, the connection to your audio device
will be interrupted automatically and you can start the call.
24
Important notes to 6/2
• The music on your audio device can be automatically activated again, if you press the „T“
button to finish the call.
• If you want to connect a mobile phone & audio device to one channel at the same time,
please note that you have to use a stereo-audio-device only.
• If you shortly press the „T“ button, the music will be interrupted and the phone dials the last
dialed number. At some phones, the „T“ button must be pressed twice.
• If the phone gets switched off or the connection is interrupted because of a too long distance
while you are listening to music on another device, both connections get interrupted and the
music gets switched off.
25
7.) Incoming call during intercom conversation (only BHS-600)
a) Connect two headsets like described on page 43.
b) Connect your phone with your headset (channel 1).
c) If you receive an incoming call, the intercom functionality will be interrupted during the call.
d) After the call is finished, you can automatically talk to your passenger again.
Please note: Making a call and intercom conversation at the same time is not allowed!
Battery recharching and durability
Recharge time
~ 2 hours
Durability
Stand-By
Using channel 1 or 2
Using channel 1 + 2
180 hours
13 hours
8 hours
26
Specifications of BHS-500 & BHS-600
Name
Wireless data communication system (BHS-500 / BHS-600)
Bluetooth version
2.0
Frequency
2,4022 ~ 2,480 MHz
Transmission output
0,25 ~ 2,5 mW
Wireless distance
Up to 10m
Dimensions (WxHxD)
51 x 90 x 20,5
Weight
120g
Operating temperature
-20 ~ 50°C
Recharger
AC 100 ~ 240V , 50/60Hz
DC power
DC 5V, 1A
Contact address for Europe:
Camos motorcom / iMC GmbH
Car-Zeiss-Str. 3
D-22946 Trittau
Tel. +49 (0)4154 80 83 0
www.imc-motorcom.com
Contact address for America:
Camos Co. Ltd.
#424-9, Chongchon-dong
Pupyong-Ku, Inchon, Korea
Tel. +82 (0)32 522 9175
www.camos.co.kr
27
CE1177
Printed in Korea
28
Download PDF

advertising