Adagio® Media System w/Advanced Image Processing
The Adagio AIP Media System (AMS-AIP) delivers a high-performance
digital home theater and multi-room audio distribution solution in one
elegant yet cost-effective package. Right out of the box, the AMS-AIP
provides sophisticated surround processing, amplification, and
digital video processing for a complete home theater, plus audio
signal routing for 4 or more pairs of remote room speakers. Its
built-in Crestron control system enables enhanced control and
integration capability for AV and home automation.
Advanced Image Processing
The AMS-AIP scales video input signals to match the native resolution
of your high-definition display, supporting non-interlaced output
resolutions up to 1600 x 1200, including 1080p HDTV, with a choice of
HDMI, DVI, RGB, or YPBPR component connectivity. Featuring
Gennum's Visual Excellence Processing™ with TruMotionHD™ fully
adaptive deinterlacing, the AMS-AIP achieves exceptional image
sharpness and resolution from both SDTV and HDTV sources.
RealityExpansion™ 10-bit image processing employing FidelityEngine™
image enhancement delivers astounding realism and detail. FineEdge™
dynamic directional interpolation eliminates jaggy artifacts typical
of traditional deinterlacing algorithms. Onscreen graphics provides
useful feedback during setup and operation, and can even be customized
like an Isys® touchpanel for a personalized appearance. PIP and PBP
processing with alpha blending enable versatile windowing capabilities
for displaying combinations of any two video sources, or video plus
HDMI™ and DVI Technology
The AMS-AIP's HDMI inputs and output provide simplified connectivity
for today's and tomorrow's high-end components, providing a
single-cable digital interface that combines uncompressed
high-definition video, multi-channel audio, and intelligent format and
command data. HDMI (High Definition Multimedia Interface) supports
DVD and DTV sources up to 1080p, and can decode digital audio signals
from DVD-Audio, SACD, Dolby Digital and DTS sources. The addition of
DVI affords increased compatibility for connecting multimedia
computers and a wide range of professional video players, displays,
and projectors.
7.1 Surround Sound
The AMS-AIP features a state-of-the-art surround sound processor and
powerful 7-channel amplifier designed to deliver jaw-dropping sonic
performance from all of today's digital sources. Dolby® Digital EX and
DTS-ES 96/24 decoding achieve superlative sound quality from the
latest generation of DVD video and audio titles, with a full set of
decoding and processing modes provided to support and enhance the vast
range of movies and music available.
High-End Audio Performance
A thunderous 7x100 Watts of amplification, plus discrete subwoofer/LFE
balanced line output, are furnished to drive any 5.1, 6.1, or 7.1
theater speaker system with powered subwoofer. An advanced Class G
amplifier topology produces the great sound of a classic Class AB
design with near-digital efficiency. Independent six-band parametric
EQ is provided on each output channel including the subwoofer/LFE
output, as well as time-delay affording up to 80mS per channel for
proper lip-sync and speaker placement compensation.
Audyssey MultEQ XT facilitates an optimum listening experience for
every seat in your theater using an ingenious equalization solution that
corrects for both time and frequency response problems. MultEQ XT is the
only technology of its kind capable of properly measuring sound response
throughout the listening area, and combining that information to accurately
represent the acoustical intricacies of the room. Based on these
measurements, MultEQ XT meticulously calculates an equalization solution
that effectively minimizes response distortion at every listening position.
Copious AV Inputs and Outputs
To accommodate a full complement of audio sources, the AMS-AIP
supplies a total of 10 S/PDIF digital audio inputs, 3 HDMI inputs, 10
analog stereo inputs, and one analog 7.1 surround input. In addition
to its speaker and subwoofer outputs, the AMS-AIP furnishes unbalanced
line-level audio outputs containing the 7.1 surround signal as well
as a stereo downmix signal. High-definition video switching is also
provided for 1 DVI and 3 HDMI high-resolution digital sources, plus 8
component, 4 S-Video, and 4 composite analog video sources.
Multi-Room Audio
In addition to surround sound in the home theater, the AMS-AIP also
distributes stereo audio to feed several pairs of remote room
speakers. Listeners in each room can enjoy their own choice of radio
stations, CDs and MP3s, or even a stereo downmix of the surround sound
output. Each room includes its own volume, bass, and treble controls,
with the ability to combine a group of rooms easily at the press of
the "Party Mode" button.
The integrated multi-room amplifier delivers a robust 45 watts per
channel to each of 4 rooms. A fifth stereo room, or up to 2 mono
rooms, can be supported using spare surround channels if the theater
is configured as 6.1, 5.1, or lower. And without requiring any
programming, the AMS-AIP can easily be expanded to support another six
rooms by adding an AAE Audio Expander
Expander. In fact, a total of three
AAE's may be added, with simple setup afforded using Crestron Adagio
Composer software, supporting up to 24 rooms in all (plus the
2-Channel Steering
For homes that combine their theater with their main living space,
some additional signal routing flexibility is needed. Listening to
stereo music through the theater's main front speakers can have a
distracting effect when there's music playing throughout the house.
With 2-channel and multi-channel steering capability, the AMS-AIP lets
in addition to, the front speakers for the most cohesive whole-house listening
Satellite Radio
Up to 3 dual radio tuner cards can be installed in the AMS-AIP to
enable combinations of up to 6 AM/FM, XM and SIRIUS® Satellite Radio
tuners, letting listeners in different rooms each enjoy their own
choice of music, news, sports and talk. For satellite and most FM
stations, the AMS-AIP displays data such as the radio station name,
song and artist, traffic, weather, and phone numbers. The AMS-AIP
comes with one tuner card included.
Audio Servers
Plug-and-play compatibility with Crestron's AAS Adagio Audio Server
and CEN-IDOC Interface for Apple iPod® * delivers instant access to
an entire collection of music from any room in the house with full
capability for browsing by album, artist, and song title.
Enhanced Front Panel Control
With its large backlit LCD display, Room and Preset buttons, 4
softkeys and dual rotary encoders, the AMS-AIP front panel provides a
very powerful, yet friendly user interface for setting up and
controlling the theater along with a houseful of speakers. Custom
naming of rooms, groups, and sources is facilitated on the LCD
display, and also on the custom backlit label strip using Crestron
Engraver software. A selection of pre-made labels is also included.
Versatile Room Controls
A choice of basic 12-button keypads or the advanced APAD Wall Mount
LCD Controller enables versatile control of the AMS-AIP in every
room. A keypad provides the essential controls for adjusting volume,
selecting sources, and toggling up and down through tracks and radio
channels. For more elegant control, the APAD actually extends the many
functions of the AMS-AIP front panel to each room, providing true
feedback for display of audio sources, radio stations, CD titles,
artists, and tracks by name, plus audio settings and many other
2-Series Ethernet Control System
Adagio brings Crestron's industry-leading Total Home Technology to
homes of any size and budget. At the heart of the AMS-AIP is the
powerful 2-Series control engine. With both Cresnet and Ethernet
connectivity, plus custom programmability using Crestron
SystemBuilder™ software, the AMS-AIP allows expansion and
customization using Crestron's line of touchpanels, wireless remotes,
and hundreds of other devices. The built-in Web server with native
e-Control®2 XPanel support enables full remote control over IP from
computers and PDA devices, as well as remote diagnostics and updates.
Built-in IR, RS-232, relay and digital input ports are included to
interface the AMS-AIP with non-Crestron devices ranging from CD
changers to security systems.
Home Automation and Integration
More than just a home audio video system, the AMS-AIP can actually
grow as part of a complete home automation solution supporting all of
Crestron's Cresnet and infiNET™ controllable dimmers, shade
controllers, thermostats, and so much more.
> Integrated surround sound processor and amplifier
> Audyssey MultEQ XT advanced automatic equalization
> High-definition analog and HDMI/DVI digital video
> Advanced video image processing
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
> Crestron QuickSwitch HD™ technology
> Audio distribution for 4 to 6 rooms, expandable up to
> Choice of 12-button room keypads or APAD LCD
> Accepts up to 3 dual radio tuner cards for XM and
SIRIUS Satellite Radio, and AM/FM radio with RDS/RBDS (1
tuner card included)
> Plug-and-play support for Adagio Audio Server and iPod
> Set up via front panel or software
> 2-Series Ethernet control system — programmable to
support Crestron touchpanels, wireless remotes, lighting
dimmers, thermostats, and much more!
CPU: 32-bit Freescale ColdFire® Microprocessor
Flash: 16 MB
NVRAM: 256 kB
Operating System
Real-time, preemptive, multitasking kernel, multi-threaded, FAT32 file
system with long names; supports SIMPL™ Windows®
and SIMPL+®
10/100BaseT, static IP or DHCP/DNS, SSL, autonegotiating, full duplex TCP/
IP, UDP/IP, SMTP, SNMP, built-in Web server and e-mail client; supports
Crestron e-Control 2 XPanel and RoomView applications
Graphic Engine
16-bit non-palette graphics; 65,536 colors; Synapse image rendering
algorithm; multi-mode objects, PNG translucency, full-motion (60 fps)
animation, transition effects
Graphics Processor
CPU: 32-bit Freescale ColdFire® Microprocessor
Graphics Memory
Flash: 32 MB
Scaling Processor: Gennum VXP™ with dual channel image processor
Input Signal Types: HDMI, DVI, component (YPbPr), S-Video (Y/C), and
composite video
Output Signal Types: HDMI, DVI, component (YPbPr), RGB
Input Formats: NTSC or PAL, HDTV up to 1080i/1080p (1080p via HDMI/DVI
Input Resolutions, Interlaced: 480i, 576i, 1080i
Input Resolutions, Progressive/Non-Interlaced: 640 x 480 minimum to 1600
x 1200 @ 60Hz maximum
Output Resolutions (Progressive/Non-Interlaced Only) : 480p 60Hz, 576p 50Hz,
720p 50Hz, 720p 60Hz, 1080p 50Hz, 1080p 60Hz, 680x480 60Hz, 680x480
75Hz, 800x600 60Hz, 800x600 75Hz, 1024x768 60Hz, 1024x768 75Hz,
1280x768 60Hz, 1280x768 75Hz, 1280x1024 60Hz, 1280x1024 75Hz,
1400x1050 60Hz, 1400x1050 75Hz, 1600x1200 60Hz, 1680x1050 60Hz
Output Aspect Ratios: 4:3, 5:4, 15:9, or 16:9 based on resolution
Analog Gain: 0dB (75 ohms terminated)
Analog Bandwidth: 400MHz
Analog Crosstalk: >54dB
Analog S/N: >70dB
Audio - Surround Sound Processor
Processor: Texas Instruments DA610 Aureus™ 32-bit floating point DSP w/
Audyssey MultEQ® XT setup algorithms
Analog-To-Digital Conversion: 24-bit 48 kHz
Digital-To-Analog Conversion: 24-bit 48 kHz
Supported Formats/Modes: Bypass, Stereo, 2-channel steering (surround or
rear), Multi-channel stereo, Ambience Effects (Cathedral, Hall, Stadium, Jazz
Club), Dolby® Pro Logic IIx, Dolby Digital 5.1, Dolby Digital EX, DTS Neo:6, DTS
Digital 5.1 Discrete, DTS ES 6.1 Discrete, DTS ES 6.1 Matrix, DTS 96/24
Surround Sound Master Volume: -80dB to +20dB, 0.5dB steps
Speaker Compensation: ±12dB, 0.5dB steps
Low Frequency Effects (LFE): -10dB to +0dB, 0.5dB steps
Mode Trim (Level Preset): ±12dB, 0.5dB steps (master); ±12dB, 0.5dB steps (per
output); -10dB to +0dB, 0.5dB steps (LFE)
Input Compensation: ±10dB, 1 dB steps
Mute: -80dB (electronic), >-100dB (relay)
Bass Gain Range: ±12dB, 1 dB steps
Treble Gain Range: ±12dB, 1 dB steps
EQ Modes: Audyssey MultEQ XT or 6-band parametric or graphic per surround/
subwoofer output channel
PEQ Filter Gain: ±12dB, 0.5dB steps
PEQ Filter Bandwidth: 0.02 to 2.0 octaves
PEQ Filter Center Frequency: 20Hz to 20kHz
GEQ Filter Gain: ±10dB, 0.5dB steps
GEQ Filter Center Frequencies: 50, 180, 630, 2.3k, 8k Hz
Crossover/High-Pass Frequency: 40 to 200 Hz, 10Hz steps
Maximum Delay: 80mS per channel, picture delay (lip-sync) and speaker
distance compensation combined
Dynamic Range (compression): Minimum, Standard, Maximum
Frequency Response: 20Hz to 20kHz ±0.01dB (preamp);
20Hz to 20kHz ±0.2dB (power amp)
THD+N: <0.006% (preamp), 0.03% (power amp), 20Hz to 20kHz
S/N Ratio: >100dB (preamp), 100dB (power amp) 20Hz to 20kHz A-weighted
Dynamic Range: >113dB
Channel Separation: >85dB (preamp), >80dB (power amp)
Audio - Multiroom Distribution
Typical of up to 5 Stereo, or 4 Stereo + 2 Mono Room Outputs:
Controls: Volume, Balance, Bass, Treble, Loudness, Mute, Mono, Input
Volume Gain Range: -80dB to +20dB, 1 dB steps
Mute: -100dB (electronic), -120dB (relay/room off)
Input Compensation: ±10dB, 1 dB steps
Bass Gain Range: ±12dB, 2 dB steps
Treble Gain Range: ±12dB, 2 dB steps
Frequency Response: 20Hz to 20kHz ±0.4dB
S/N Ratio: >100dB, 20Hz to 20kHz A-weighted
THD+N: <0.08%, 20Hz to 20kHz
Stereo Separation: >75dB
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
Connectors - Control
NET 1 - 6: (6) 4-pin 3.5mm detachable terminal blocks;
Cresnet Master ports, provide data and power for keypads and other Cresnet
IR OUT 1 - 8: (8) 3.5mm TRS mini-phone jacks, IR/Serial ports;
IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5V) up to 9600 baud
IR IN: (1) 3.5 mm TRS mini-phone jack;
For connection of the CNXRMIRD IR receiver (sold separately);
Allows IR wireless control from Crestron and third-party remotes using RC-5
IR commands
INPUT 1 - 4: (1) 5-pin 3.5mm detachable terminal block;
Comprises (4) digital inputs;
Rated for 0-24 Volts DC, referenced to GND;
Input Impedance: 2.2k ohms pulled up to 5 Volts DC;
Logic Threshold: 2.5 Volts DC nominal
RELAY OUTPUT 1 - 4: (1) 8-pin 3.5mm detachable terminal block;
Comprises (4) normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts
COM A - B: (2) DB9 male, bidirectional RS-232 ports;
Up to 115.2k baud, hardware and software handshaking support
COMPUTER: (1) 6-pin RJ11 female, bidirectional RS-232 computer console
LAN: (1) 8-wire RJ45 with 2 LED indicators, 10/100BaseT Ethernet port;
Green LED indicates link status, Yellow LED indicates Ethernet activity
NET: (2) 4-pin 3.5mm detachable terminal blocks;
Cresnet Master ports, paralleled with NET ports 1 through 6;
Normally connect to AAE
USB (front): (1) USB Type B female (behind label strip);
USB 1.1 computer console port (cable included)
Connectors - Audio
SLOT 1 - 3: (3) Adagio tuner card slots; accept choice of dual tuner cards;
Outputs from the tuner cards parallel to ANALOG SOURCES 1 - 6
Unbalanced line-level 7.1 Surround Sound audio inputs;
Maximum Input: 3.2 Vrms (flat);
Input Impedance: 47k ohms
ANALOG SOURCES 1 - 10: (20) RCA female comprising (10) unbalanced
stereo line-level audio inputs;
Inputs 1 through 6 parallel with outputs from tuner card slots;
Maximum Input: 3.2 Vrms (flat);
Input Impedance: 47k ohms
DIGITAL SOURCES 1 - 6: (6) RCA female;
S/PDIF coaxial digital audio inputs;
Input Impedance: 75 ohms
DIGITAL SOURCES 7 - 10: (4) JIS F05 female (TOSLINK) optical fiber
S/PDIF optical digital audio inputs
OUTPUT: (2) RCA female;
Unbalanced stereo line-level audio output containing a stereo mix of all
internal surround sound processor outputs;
Maximum Output Level: 2.5 Vrms;
Output Impedance: 50 ohms
PRE-AMP OUTPUT: (8) RCA female;
Unbalanced line-level 7.1 surround sound audio outputs;
Maximum Output Level: 2.5 Vrms (front, surround, back, center); 6.3 Vrms
Output Impedance: 50 ohms
SUB (balanced): (1) 3-pin 3.5mm detachable terminal block;
Balanced line-level subwoofer audio output;
Maximum Output Level: 12.6 Vrms;
Output Impedance: 100 ohms
ROOM 1 - 4: (8) 2-pin 7.62mm detachable terminal blocks;
Multi-room amplifier outputs;
Wire Size: Terminals accept up to 12 AWG;
Output Power: 45 Watts/Ch. at 8 ohms, 60 Watts/Ch. at 4 ohms
FRONT, CENTER, SURROUND, BACK or ROOM 5/6: (7) 2-pin 7.62mm 20A
detachable terminal blocks;
Power amplifier outputs;
Wire Size: Terminals accept up to 10 AWG;
Output Power: 100 Watts/Ch. at 8 ohms, 130 Watts/Ch. at 4 ohms
Microphone (front) : (1) 3.5mm TRS mini-phone jack (behind label strip);
Input for calibrated microphone (part of CSSTK Surround Sound Tuning Kit, sold
SELECT: Continuous turn rotary encoder with adjoining “ENTER” pushbutton
with green LED, for selecting sources, surround modes, rooms, radio
stations, and other parameters
VOLUME: Continuous turn rotary encoder, adjusts volume of selected room
(defaults to theater)
H: Hardware reset button, recessed, reboots the control system
S: Software reset button, recessed, restarts the SIMPL program
Connectors - Video
Temperature: 41° to 104°F (5° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 1600 BTU/hr @ 8 ohms, 2000 BTU/hr @ 4 ohms; all
channels loaded to 1/8 full power
COMPONENT INPUTS 1 - 8: (24) RCA female comprising (8) component/HDTV
(YPbPr) video inputs;
Input signal sensing on “Y”;
Input Level: 1 Vp-p nominal (Y), 0.7 Vp-p nominal (PbPr);
Input Impedance: 75 ohms nominal
S-VIDEO 1 - 4: (4) 4-pin mini-DIN female;
S-Video (Y/C) video inputs w/input signal sensing on “Y”;
Input Level: 1 Vp-p nominal (Y), 0.7 Vp-p nominal (C);
Input Impedance: 75 ohms nominal
VIDEO 1 - 4: (4) RCA female;
Composite video inputs w/input signal sensing;
Input Level: 1 Vp-p nominal;
Input Impedance: 75 ohms nominal
RGB or component/HDTV video output;
Formats: RGBHV or YPbPr;
RGB Output Level: 0.7 Vp-p nominal;
HV Sync Output Level: TTL, 5 Vp-p;
YPbPr Output Level: 1 Vp-p nominal (Y), 0.7 Vp-p nominal (PbPr);
Horizontal Frequency: 31.25 to 75 kHz;
Vertical Frequency: 50 to 75 Hz
DVI-D IN: (1) 24-pin DVI-D female, DVI 1.0 digital video input, includes HDCP 1.1
DVI-D OUT: (1) 24-pin DVI-D female, DVI 1.0 digital video output, includes HDCP
1.1 protocol
HDMI INPUT 1 - 3: (3) 19-pin Type A HDMI (V.1.3 with Deep Color) 1.3 digital
video/audio input; includes HDCP 1.1 protocol
HDMI OUTPUT: (1) 19-pin Type A HDMI (V.1.3 with Deep Color) digital video/
audio output; includes HDCP 1.1 protocol
Connectors - Power
FUSE: Main fuse,T10AH;
(1/4” x 1-1/4”, 250V, 10A, time-lag, high-rupture rated)
120V~50-60Hz: (1) IEC Male;
Mates with removable power cord (included)
G: 6-32 screw, chassis ground lug
LCD Display
Green LCD dot matrix, 128 x 64 resolution, adjustable LED backlight
Controls and LED Indicators
THEATER OFF: Pushbutton with green LED, turns off all theater outputs
MUTE: Pushbutton with red LED, mutes audio in currently selected room
(defaults to theater)
MODE/MENU: (8) Pushbuttons, select mode or menu item for adjustment:
SOFTKEYS: (4) LCD display-driven pushbuttons, select/activate various functions
ROOMS, SOURCES : (12) Pushbuttons with green LEDs and backlit labeling strip,
select room(s), input source(s), PARTY MODE, and ALL OFF
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
Power Requirements
Main Power Consumption : 1000 Watts (8 Amps) @ 120 Volts AC, 50-60Hz
Available Cresnet Power: 20 Watts (0.83 Amps @ 24 Volts DC)
Black metal with molded ABS/PC front panel;
Freestanding, side ventilation should not be restricted
Height: 7.39 in (18.78 cm)
Width: 17.16 in (43.59 cm)
Depth: 18.80 in (47.75 cm)
57.5 lb (26.1 kg)
AMS-AIP: Adagio Media System w/Advanced Image Processing (Includes [1]
ATC-AMFM2 Dual AM/FM Tuner Card)
AMS-AIP-SRD: Adagio Media System w/Advanced Image Processing
(Includes [1] ATC-AMFMSRD AM/FM and SIRIUS Satellite Radio Tuner Card)
AMS-AIP-XM: Adagio Media System w/Advanced Image Processing (Includes
[1] ATC-AMFMXM AM/FM and XM Satellite Radio Tuner Card)
All the features and specifications of the AMS-AIP except:
Connectors (partial)
FUSE: Main fuse,T5AH;
(5mm x 20mm, 250V, 5A, time-lag, high-rupture rated)
220V-240V~50-60Hz: (1) IEC Male; mates with removable power cord
Power Requirements
Main Power Consumption : 1000 Watts (4 Amps) @ 220-240 Volts AC,
Available Cresnet Power: 20 Watts (0.83 Amps @ 24 Volts DC)
APAD:: Wall Mount LCD Controller
C2N-DBF12:: 12-Button Decorator Function Keypad
ATC-AMFM2:: Adagio Dual AM/FM Tuner Card
ATC-AMFMXM:: Adagio AM/FM and XM Satellite Radio Tuner Card
ATC-AMFMSRD:: Adagio AM/FM and Sirius Satellite Radio Tuner Card
AAE:: Adagio Audio Expander
AAS:: Adagio Audio Server
CEN-IDOC:: Interface for Apple iPod®
CLS-C6(M):: iLux Integrated Lighting System
CNXRMIRD:: IR Receiver
STIRP:: IR Probe
CNSP-XX:: Custom Serial Interface Cable
C2N-TXM-C50:: XM Antenna Extension Cable
SRD-ANT-1-PAK:: Satellite Radio Antenna System
SRD-ANT-1LD-PAK:: Satellite Radio Antenna System, Long-Distance
SRD-ANT-4-PAK:: Satellite Radio Antenna System, 4-Way
SRD-ANT-8-PAK:: Satellite Radio Antenna System, 8-Way
CSSTK:: Surround Sound Tuning Kit
AES/AMS FRONT LABEL: Backlit Engravable Label Strip
* DHCP Ethernet router required.
XM Satellite Radio Statement: Hardware and required basic monthly subscription
sold separately. Premium Channel available at additional monthly cost.
Installation costs and other fees and taxes, including a one-time activation fee
may apply. Subscription fee is consumer only. All fees and programming subject
to change. Subscriptions subject to Customer Agreement available at Only available in the 48 contiguous United States. ©2005 XM
Satellite Radio Inc. All rights reserved. All other trademarks are the property of
their respective owners.
SIRIUS Satellite Radio requires subscription, sold separately. © SIRIUS Satellite
Radio Inc. “SIRIUS” and the SIRIUS dog logo are registered trademarks of SIRIUS
Satellite Radio Inc.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
Dolby, Pro Logic, Surround EX, MLP Lossless and the double-D symbol are
trademarks or registered trademarks of Dolby Laboratories.
DTS, DTS ES, and Neo:6 are trademarks of Digital Theater System, Inc.
Audyssey MultEQ is a trademark of Audyssey Laboratories.
VXP, Visual Excellence Processing, TruMotionHD, Reality Expansion,
FidelityEngine, FineEdge, and the VXP Logo are trademarks or registered
trademarks of Gennum Corporation.
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
Inc. 15
15 Volvo
Drive |Drive
| Rockleigh,
NJ 07647
NJ 07647
Tel: 800.237.2041
Tel: 800.237.2041
/ 201.767.3400
/ 201.767.3400
| Fax: | 201.767.1905
Fax: 201.767.1905
All brand names, product names and trademarks are the property of their respective owners.
©2009 Crestron Electronics, Inc.
Specifications subject to change without notice. 8/18/2009