Danfoss Thermostats Danfoss offer a stylish range of Electro - Mechanical, Electronic and Programmable Thermostats. Both Electronic and Programmable Units are able to utilise a remote air or floor sensor when referenced accordingly. Dial Thermosats have an easy to read scale with both locking and limiting facility as standard. Night Setback is achieved by means of an external timeswitch or is incorporated in the programmable range. The units are available with either a 230V (ac) or 24V (ac) power supply. Thermostat RMT: b RMT230T - 230V (ac) supply b RMT24T - 24V (ac) supply b Electro Mechanical Operation b One Stage Heat b 4°C Non-Adjustable Setback through Remote Timer Thermostat RET: Channel b RET 230NSB - 230V (ac) supply b RET 24NSB - 24V (ac) supply b Electronic On/Off Thermostat b One stage Heat b 4°C Non-Adjustable Setback through Remote Timer Channel b LED Power on (RET 230NSB only) b LED Switching Thermostat FMT230D: b ‘Flat Stat’ Thermostat - 230V (ac) supply b Low Profile Flush Mounted b Setting Dial with LCD Temperature Display b Electronic On/Off Thermostat b One stage Heat b LED Power on b LED Switching Thermostat TP5000: b TP5000si - 230V (ac)/24V (ac) supply b Programmable On/Off Thermostat b One Stage Heat b Optimum Start Feature b Remote Sensor Options b Servive Interval Feature Data Sheet RMT Wiring: Room Thermostat RMT Thermostat RET24 and RET230 RET230, RET230L, RET230C 1) Electronics °C 3 2 L C 4 NO 3 L 4 N L °C L 220/240V 3 2 1 C 220/240V Voltage Free Service Interval TimerL N °C N 4 NO NC } N NC } 220/240V N Electronics °C TP5000 Si Programmable Room Thermostat TP5000 Si Programmable Room Th RET24Datasheet and RET230 Datasheet °C RET230NSB °C Datasheet Electronics RET230VF, RET230VF2 RET230 Datasheet Electrical Connection Voltage Free °C °C °C °C } } 220/ Application N Typical 240V zones L Multiple RET230’s NSB controlled by one timeswitch. °C Electronics Electronics °C °C °C °C °C °C °C N L The ServiceTimer interval timer allows the installer Service due date is reached passeddue The Service intervaltotimer allows the installer to or Service Interval Service RET230 1) RET230C SPST contacts. RET230, RET230L, RET230C 1) RET230NSB RET230VF, RET230VF2 select a service due datehas for the boiler, this can When theboiler, servicethis duecan date When is reached select a service due date for the the s Typical Application be set between 28 days and 366 the warning repeated atdays between 28 days andaudible 366 days from theare and audibl 1 - 2 opens on increase in at temperature 1be - 3set closes onfrom increase in and temperature Multiple zones RET230NSB RET230NSB RET230NSB current date. commencing at midday, butcommencin the durati current date. RET230’s NSB controlled by one timeswitch. alarm is increased to 60 seconds, alarm is thi in Electronics Service due date is within 28Service days due date is withincancelled by prefo Timeswitch with volt free contacts 28 days for the current day cancelled Dimensions From 28 days prior to the service due date, a visual Nbutton. All3 date, override and programming 3 L 4 N Thermostat RET Wiring: service due a visual button. All 3 2 2 L 4 L 1 4 NElectronics ElectronicsFrom 28 days prior to the Electronics disabled depending upon servic Cwarning C NC and NC NO will appear in the display and a buzzer will warning will appear in theare display and NO a buzzer will are disabled sound for ten seconds each hour commencing at timer setting, heating can be restricted to at timer setting 3 3 for 3 L 2 2 2commencing L 1 4 L 1sound 4 ten seconds L hour 1 4 N N N N N each N L 220/240V 220/240V 220/240V beN cancelled current daycancelled 45 minutes each programmed hour. Cmidday, Cfor C Voltage NO this can NOthis NO NC Free NCthe NCinFree Voltage midday, can be for the current day 45 minutes L L by pressing any button. bycontacts. pressing any button. 1) RET230C has SPST Voltage Free C NC 4 NO N L 3 2 1 C NC 4 NO N L 3 2 1 C 3 2 1 Electronics L Electronics N L N } } Dimensions } Option Service Interval Timer Function Service Interval Timer Function RET230NSB Option RET230NSB Setting 0 Disabled, (factory default) Setting Disabled, (factory default) Voltage Free Voltage0Free Setting 1 Active, visual and audible warning, no heat reduction Setting 1 Active, visual and audible warning, no heat reduction Timeswitch with volt free contacts Setting 2 Active, visual and audible warning, heat reduced 45audible minuteswarning, per hourheat reduced to 45 minutes per Setting 2 Active, visualto and 1 - 2 opens on increase in temperature - 3audible closeswarning, on increase in temperature 30 minutes per hour Setting 3 Active, visual1and heat reduced Active, visualto and audible warning, heat reduced to 30 minutes per Electronics Electronics Setting 3 Electronics °C °C °Cheat reduced to °C RET24 RET24NSB RET24VF Setting 4 °C Active, visual and audible warning, 15audible minuteswarning, per°Chourheat Setting 4 Active, visual and reduced to 15 minutes per RET230NSB NC 4 NO Specification and OrderingSpecifiThermostat Features cation and Ordering Electronics } } } } } } } FMT230D FMT230DFlush FlushMount MountRoom RoomThermos Therm Datasheet Datasheet } } } Electronics TP5000 Si TP5000-RF SiTP5000 Si TP500 Thermostat Features Electronics °C °C °C code, °C built-in °C °C Sales sensor 087N791200 Sales code, built-in sensor 087N791000 087N791000087N7 Sales code, built in sensor c/w RX1 receiver 087N791400 3 B 4 built in sensor c/wARX1B receiver Sales code, A 3 3 2 2 B 4 C 4 A Sales Free code, remote sensor inputs1 Sales 087N791100 1 C Voltage NO NC Free Voltage Voltage Free remote sensor inputs code, 087N791100087N7 5/2 day or 24 hour programmable room thermostat Yes, selectable by installer 5/2 day or 24 hour programmable room thermostat Y L L N 2, 4 or 6 events per day Yes, selectable by installer 24V with optional A/B programming 24V Voltage Free Free 2, 4 or 6 events per day24V with optional A/B Voltage programming Y N N L Factory pre-set programmes Factory pre-set programmesRET24NSBYes, one for weekdays, another for weekends Yes, one fo RET24 RET24VF Typical Application Factory set calendar clock Automatic summer/wintertime change Factory set calendar clock Automa Multiple zones Time accuracy ± 1 minute per year Time accuracy Danfoss Randall can accept no responsibility for possible errors in catalogues, brochures and other printed material, and reserves the right to alter its products without notice. RET24NSB RET24NSB RET24NSB RET24’s NSB controlled by one timeswitch. This Memory and allcanuser and installer settings Retained also applies to products already on orderback-up, provided thattime such alterations be made without subsequent changes being necessary in specifications already agreed. for life of product Memory back-up, time R and all user and installer settings Temperature 5-30°C range Temperature range Electronics Timeswitch with volt free contacts °C °C °C °C °C °C Programmable frost thermostat function Yes Programmable frost thermostat function Control output, derived from PI algorithm or Chrono-proportional, 3, 6, On/Off 9 or 12 or cycles per Control derived fromOn/Off algorithm Chrono 3 output, B 4 AElectronics 3 3 2 2 B 4 B C 4 API AElectronics Electronics Switching differential in On/Off mode ±1°C °C °C °C °C °C °C C NO NC Switching diff erential in On/Off mode Specifi Specifi cation cation and and Features Features Installer selectable advanced programming options Yes, refer to table opposite selectable advanced Aprogramming Y Details L A B 3 3No 3 2 Ordering 2 Code 2 options B C Ordering 4 Details C Installer 4 B C 4 A Code No L N Installer selectable service interval timer Yes, NC 28 to 366 days from current dateYes, 28 N L 24V 24V interval timer CVoltage 24V C Voltage C NC NO NO NO NC Free Installer selectable service Free N Temperature Temperature Range Range N L Programmable range limitation Yes Programmable range limitation Setting Setting knob knob andand LCDLCD display display Electronic keyboard lock Typical Application Electronic keyboard lock Part No: 352 Iss.4. 05/99 Yes N Chrono-proportional Chrono-proportional or On/Off or On/Off control control 24V zones Power supply 2 x AA alkaline cells 230V Multiple L Power supply 2 x AA alk Heat Heat or cool or cool operation operation RET24NSB RET24NSB RET24NSB RET24’s NSB controlled by one timeswitch. Switching action of output relay Switching action of output relay Voltage Free Voltage Free Voltage Free Output Output relay relay contact contact rating rating Switch rating of output relay 3 (1) A, 10-230V N/A 3 (1) A, 10-230V 310-250 (1)10-2 A, Switch rating of output relay Timeswitch with volt free contacts Switching Switching action action Transmission frequency (RF models) Transmission N/A 433.92MHz N frequency (RF models) N/A Power Power supply supply 23023 Transmission range (RF models) N/A 30m max. NV Transmission range N/A Danfoss Randall can accept no responsibility for possible errors in catalogues, brochures and other printed material, and reserves the(RF right models) to alter its products without notice. Electronics Electronics Electronics Maximum Maximum ambient ambient temperature temperature This also applies to products already on order provided that°Csuch alterations can be made without subsequent Dimensions, mm 110 wide °C °C changes°Cbeing necessary in specifications already agreed. °C °C x 88 high x 28 deep mm without notice. This also applies to products already 11 Danfoss can accept no responsibility for possible errors in catalogues, brochures, and other printed material. Danfoss reserves theDimensions, right to alter its products Dimensions Dimensions (mm) (mm) 85 w Design standard EN60730-2-9, (EN300220 for RF) 85 wide on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. Design standard EN6 All trademarks in this material are property of the respective companies. 3 the4 Danfoss logotype are trademarks 3 All4rights reserved. 3 21 and 2 A/S. 2 B CDanfoss B ofCDanfoss B C 4 A A A Can be configured by installer for remote temperature limit for sensor, window contact sensor, or telephone activated 1 N L configuredsensor, by installer remote limit sensor, windo C NC NO CCan C temperature NCbeNO NC NO Danfoss Randall Ltd. Ampthill Road N 24V TP5000 TP5000 Si FMT230D Bedford MK42 9ER TP5000M Si L Wiring Wiring TP5000 Si Tel: 0845 1217 400 Voltage Free Voltage Free Voltage Free Fax: 0845 1217 515 Wiring Wiring Details Details 220/ N 240V L Thermostat TP5000 / FMT Wiring: } } ELECTRONICS S2 Electronics S1 Iss.4. 05/99 ELECTRONICS } S1Part No: 352 Email: firstname.lastname@example.org Website: www.danfoss-randall.co.uk B C S2 VDRBW202 Part No. 294 Issue 08 03/07 2 Danfoss can accept no responsibility for possible errors in catalogues, brochures, and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved. Danfoss Randall Ltd. 1 2 3 Ampthill Road NC COM NO Bedford MK42 9ER Tel: 0845 1217 400 Fax: 0845 1217 515 Heating Email: email@example.com Load Website: www.danfoss-randall.co.uk 2 Part No. 294 Issue 08 03/07 Dimensions Dimensions 1 2 3 NCNCCOM NO COM COM NCNONO N L L L Heating Remote Input Load (TP5000 Si only) N L L BS1 S2 N Remote N In (TP5000MA S Ph NN N 230 Vac 230 Vac N Remote Input (TP5000 Si only) 1 VDRBW202 2 3 NC COM NO 1 Please note:NC CO On 230V version 8 Remote Sensors Air Sensor TS2 b Indoor Use Only b Operating Range -50 to 60°C b 60mm x 45mm x 21mm Slab Sensor F7H b Copper Enclosure b Supplied with 3mtrs of cable b Operating Range -50 to 60°C b 8mm OD x 50mm For further information telephone 01530 519666 or visit www.radiantcontrol.co.uk Radiant Control Ltd, Unit 6, Cartwright Court, Cartwright Way, Bardon Hill, Coaville, Leicestershire. LE67 1UE Tel: 01530 519666 Fax: 01530 519667 Email: firstname.lastname@example.org Web: www.radiantcontrol.co.uk Every care has been taken to ensure that the information included in this document was accurate at the moment of printing.