MODEL NUMBER LMD-650 BID SPECIFICATION
BID SPECIFICATION FOR LCD MONITORS MODEL NUMBER LMD-650 INSTRUCTIONS: REMOVE THIS COVER PAGE AND ADD TO REQUESTS FOR QUOTATION AND PROPOSALS. THE OBJECTIVE OF THIS BID SPECIFICATION IS TO ASSIST YOU IN CLEARLY SPECIFYING THE SONY PRODUCT IDENTIFIED ABOVE, AND ENSURING THAT THE BUYER IS WELL INFORMED OF THE HIGH STANDARD OF PERFORMANCE THAT IS TO BE EXPECTED OF A SONY PRODUCT. THE INFORMATION IN THIS DOCUMENT IS CURRENT AS OF JANUARY 2000. PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. SONY ELECTRONICS INC. DISPLAY PRODUCTS GROUP 1 SONY DRIVE, MD 3D9 PARK RIDGE, NJ 07656 TEL# (201)-930-1000, FAX# (201)-358-4303 1.0 General Information The purpose of this information is to provide the specification for a product whose primary purpose is the reproduction of video information for one or more viewers. This reproduction of this information is to be accomplished via a direct-view LCD monitor. This document provides the minimum specifications for this device. The performance comparison of displays is not only technical in nature, but is also subjective to the user, when viewed in the final display environment. It is recommended that devices meeting the requirements of this specification be compared in the user’s application and environment, if possible. 2.0 Description This product shall be classified as a direct-view LCD color monitor, or production display. This device shall be directly compatible with video. This device shall be directly compatible with composite video conforming to SMPTE 170M. The device shall employ the use of an a-Si TFT active matrix LCD This device shall employ a thin, lightweight design for use in presentation and production applications. A viewing hood shall be provided for use in high ambient light conditions. A hybrid handle and stand shall be incorporated into the device for portability and tilting of the device in field applications. This device shall be rackmountable using an optional rackmount kit, allowing two units to be rackmounted side-by-side. 3.0 Source Compatibility / Suitability for Application This device shall be directly compatible with the following sources: NTSC Video (Composite and Y/C) PAL Video (Composite and Y/C) 4.0 User Interface / Controllability Information Control of this device shall be accomplished through one of the following methods: Front control panel Parallel Remote Control The control panel shall be comprised of a button panel that provides access to on-screen menu navigation. The controls accessible from the front panel shall include: Power On / off Input Select Brightness / Contrast Audio Volume Overscan / Underscan Position Sizing Key Inhibit Function H/V Shift The optional parallel remote controller shall provide full control over the device from a remote location. 5.0 Performance Specifications This device shall employ the use of an active matrix LCD panel with AR coating for anti-reflectivity. The minimum native LCD resolution shall be 640 dots by 480 lines. This device shall include a built-in audio amplifier, speaker, and headphone jack for monitoring audio sources. This device shall provide selection between 4:3 and 16:9 aspect ratios, with safe-area markers and zoom functions when in 16:9 mode. 6.0 Dimensional Information This device shall employ the use of a 6.5 ” diagonal LCD. This device shall have maximum cabinet dimensions of 5.38 inches high by 8.63 inches wide and 2.25 inches deep. This device shall not weigh more than 2.2 pounds. 7.0 Connectivity Information This device shall provide for connection of 2 source devices simultaneously, without employing the use of an external switching device. These connections shall include the following: Composite Video on a BNC Connector with loop-through Audio on a 1/8” (Mini-plug) Connector Y/C Video on a 4 Pin DIN Connector with loop-through Audio on a 1/8” (Mini-plug) Connector 8.0 Power Requirements This device shall accept power at 12 V DC, using a supplied AC adapter or optional rechargeable battery pack. This device shall consume no more than 12 watts. Power to this device shall be supplied via a detachable AC cable that is readily available for replacement from local suppliers. 9.0 Safety Compliance Information This device shall be fully compliant with the following standards: UL-6500 listed C-UL (CAN/CSA-E65-94) FCC Class-A IC Class-A DHHS DNHW 10.0 Warranty Information This device shall carry a 2-year manufacturer’s warranty. Authorized servicing dealers of the devices’ manufacturer shall perform warranty service.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project