Ceramic Component Solutions

Ceramic Component Solutions
AC Safety Certified
High Voltage SMT
High Capacitance
High Temperature
EMI Filters (X2Y®)
LICC Low ESL
SMPS Stacks
High Voltage Radials
Precision Power Resistors
Power Inductors
Planar Array
Discoidal
CapStrate®
CH
EAnce
/Rplia
HSom
Ro C
Ceramic
Component Solutions
Your Technology Partner
The mission of the Johanson Companies is to
translate our customer needs into quality electronic
components, produced in factories that are models
of excellence, supported by innovative service. With
over 30 years of experience, Johanson Dielectrics
provides both standard and custom technology solutions tailored to your specific electronic applications.
Our standard product range includes High Voltage
and AC Safety Capacitors providing solutions for
Lighting, IT and Business Equipment designs. Our
X2Y® Capacitor line provides advanced EMI filtering and IC decoupling solutions and our High
Capacitance Tanceram® products provide the highest
capacitance values in the smallest cases sizes.
Customized solutions in the areas of High Temperature and High AC power ceramic capacitors are
available to customers who require a partnered technology solution.
Johanson Dielectrics design and manufacturing
operations are located in Sylmar, California and
Zhoaqing, PRC. Our quality minded management
system utilizes continuous improvement programs
focused on increased product reliability, manufacturing through-put, and product performance. Our
broad experience, applications support, and responsive service enhance our ability to drive down your
total cost of procurement and speed your time to
market.
HIGH FREQUENCY CERAMIC SOLUTIONS
Johanson Technology Inc., Camarillo CA. Products
include High Q Capacitors, Ceramic and Wirewound Chip Inductors, and a broad range of LTCC
based RF IPCs such as Antennas, Filters, Baluns,
Couplers, Matched Filter Baluns, etc.
www.johansontechnology.com
Johanson Dielectrics, Inc. reserves the right to make design and price changes without notice. All sales
are subject to the Johanson terms and conditions, including a limited warranty and remedies for nonconforming goods or defective goods. Download the Johanson terms and conditions from our website at
http://www.johansondielectrics.com/purchasing-terms-and-conditions.html.
www.johanson dielectrics.com
2
INDEX OF PRODUCTS
SURFACE MOUNT CERAMIC CAPACITORS
Ceramic Capacitor Prototyping Kits
High Voltage Capacitors 250 - 6,000 VDC
Safety Capacitors 250 VAC, Y2, Y3, Japan Standard
EMI - X2Y® Filter & Decoupling Capacitors
Low Inductance Capacitors
Chip Feedthru Filter Capacitors
High Temperature - 200°C Capacitors
High Capacitance Tanceram® Capacitors
SMT Multi-layer Ceramic Capacitors 10 - 200 VDC
4-5
6-7
8-9
10-13
14
15
16-17
18-19
20-21
LEADED CERAMIC CAPACITORS
SMPS Stacked Capacitors, 125°C & 200°C versions
Mini-SMPS Stacked Capacitors
BME Mini SMPS Capacitors
Switch-mode Radial Leaded Capacitors
High Voltage Radial Leaded Capacitors, 125°C, 200°C, 250°C versions
22-23
24-25
26-27
28-29
30-31
PRECISION POWER RESISTORS
Resistor
Resistor
Resistor
Resistor
Resistor
Resistor
Resistor
Resistor
Resistor
Wirewound Precision
Wirewound Precision SMT
Wirewound High Power Rating
Wirewound Chasis Mount
Thin Film Precision
Thin Film Current Sense
High Power Low Inductance
Thick Film, High Temperature
Metal Element Current Sense
32-33
34-35
36-39
40-42
43-46
47-49
50-52
53-55
56-57
POWER INDUCTORS
Semi-shielded (Coated)
58-65
PLANAR CAPACITORS & CUSTOM CERAMIC SOLUTIONS
Planar Array Capacitors
CapStrate® & Customer Ceramic Solutions
Part Number, Dielectric, Packaging Specifications
www.johanson dielectrics.com
66-67
68-69
70-73
3
CERAMIC CAPACITOR ENGINEERING DESIGN KITS
Johanson Dielectrics, Inc. offers a variety of multi-layer chip capacitor
sample kits for proto-type design work. Each kit is grouped by type,
size, or voltage and contains a selection of popular values and
tolerances. The chips are individually packaged in labeled plastic
compartments for easy access. The general range of kit contents
is described below. Specific part number details may be found at
www.johansondielectrics.com
0402 Ceramic Chip Capacitor Kit
P/N: S-0402
1400 piece sample assortment of selected values from 1.0pF to 0.22µF
Chip Size
Voltage Rating
Dielectric
Capacitance Range
Qty / Value
Total Qty
0402
50 VDC - 6.3 VDC
NP0, X7R,Y5V
1.0pF to 0.22µF
50 pcs
1400 pcs
0603 Ceramic Chip Capacitor Kit
P/N: S-0603
1400 piece sample assortment of selected values from 1.0pF to 0.22µF
Chip Size
Voltage Rating
Dielectric
Capacitance Range
Qty / Value
Total Qty
0603
50 VDC - 16 VDC
NP0, X7R,Y5V
10pF to 0.22µF
50 pcs
1400 pcs
0805 Ceramic Chip Capacitor Kit
P/N: S-0805
1400 piece sample assortment of selected values from 1.0pF to 0.47µF
Chip Size
Voltage Rating
Dielectric
Capacitance Range
Qty / Value
Total Qty
0805
100 VDC - 16 VDC
NP0, X7R
10pF to 0.47µF
50 pcs
1400 pcs
TANCERAM® HIGH CAPACITANCE Ceramic Chip Capacitor Kit
P/N: S-TAN-X5R
500 piece sample assortment of selected values from 1.0µF to 100µF
Chip Size
Voltage Rating
Dielectric
Capacitance Range
Qty / Value
Total Qty
0402, 0603, 0805
1206, 1210
25 VDC - 6.3 VDC
X5R
1.0µF - 100µF
10 - 25 pcs
500 pcs
500 VDC Ceramic Chip Capacitor Kit
P/N: S-500
400 piece sample assortment of selected values from 33pF to 0.1µF
Chip Size
Voltage Rating
Dielectric
Capacitance Range
Qty / Value
Total Qty
0805 - 1812
500 VDC
NP0, X7R
33pF to 0.1µF
10-20 pcs
400 pcs
1000 VDC Ceramic Chip Capacitor Kit
P/N: S-1KV
400 piece sample assortment of selected values from 22pF to 0.1µF
Chip Size
Voltage Rating
Dielectric
Capacitance Range
Qty / Value
Total Qty
0805 - 2225
1000 VDC
NP0, X7R
22pF to 0.1µF
10-20 pcs
400 pcs
Johanson may from time-time adjust actual kit contents based on design demand trends.
Check the Johanson web site for design kit updates and kit content changes.
4
www.johanson dielectrics.com
CERAMIC CAPACITOR ENGINEERING DESIGN KITS
2000 VDC Ceramic Chip Capacitor Kit
P/N: S-2KV
300 piece sample assortment of selected values from 22pF to 0.022µF
Chip Size
Voltage Rating
Dielectric
Capacitance Range
Qty / Value
Total Qty
1206 - 2225
2000 VDC
NP0, X7R
22pF to 0.022µF
10-20 pcs
300 pcs
X2/Y3 SAFETY CERTIFIED Ceramic Chip Capacitor Kit
P/N: S-SY3
240 piece sample assortment of selected values from 10pF to 1500 pF
Chip Size
Voltage Rating
Dielectric
Capacitance Range
Qty / Value
Total Qty
1808
3KV DC / 250 AC
NP0, X7R
10pF to 1500 pF
20 pcs
240 pcs
X1/Y2 SAFETY CERTIFIED Ceramic Chip Capacitor Kit
P/N: S-SY2
200 piece sample assortment of selected values from 10pF to 2200 pF
Chip Size
Voltage Rating
Dielectric
Capacitance Range
Qty / Value
Total Qty
1808 - 2220
5KV DC / 250 AC
NP0, X7R
10pF to 2200pF
20 pcs
200 pcs
X2Y® EMI FILTER Capacitor Kit - 0402 Size
P/N: S-X07CBK
600 piece sample assortment of selected values from 1.0pF to 0.01µF
Chip Size
Voltage Rating
Dielectric
Capacitance Range
Qty / Value
Total Qty
0402
10 - 50 VDC
NP0, X7R
1.0pF to 0.01µF
50 pcs
600 pcs
X2Y® EMI FILTER Capacitor Kit - 0603 Size
P/N: S-X14CBK
700 piece sample assortment of selected values from 1.0pF to 0.01µF
Chip Size
Voltage Rating
Dielectric
Capacitance Range
Qty / Value
Total Qty
0603
50 - 100 VDC
NP0, X7R
1.0pF to 0.01µF
50 pcs
700 pcs
X2Y® POWER BYPASS Capacitor Kit - 0603 Size
P/N: S-X14-PBP
300 piece sample assortment of selected values from 1.0nF to 1.0µF
Chip Size
Voltage Rating
Dielectric
Capacitance Range
Qty / Value
Total Qty
0603
6.3 - 100 VDC
X7R, X5R
1.0nF to 1.0µF
20 pcs
300 pcs
X2Y® EMI FILTER Capacitor Kit - 0805 Size
P/N: S-X15-EMI
300 piece sample assortment of selected values from 1.0pF to 0.01µF
Chip Size
Voltage Rating
Dielectric
Capacitance Range
Qty / Value
Total Qty
0805
50 - 100 VDC
NP0, X7R
1.0pF to 0.01µF
20 pcs
300 pcs
X2Y® DC MOTOR FILTER Capacitor Kit
P/N: S-X2Y-MTR
300 piece sample assortment of selected values from 0.10µF to 0.47µF
Chip Size
Voltage Rating
Dielectric
Capacitance Range
Qty / Value
Total Qty
1206 - 1812
100 VDC
X7R
0.10µF to 0.47µF
30 pcs
300 pcs
Johanson may from time-time adjust actual kit contents based on design demand trends.
Check the Johanson web site for design kit updates and kit content changes.
www.johanson dielectrics.com
5
HIGH VOLTAGE SURFACE MOUNT MLCCS 250 - 6,000 VDC
These high voltage capacitors feature a special internal electrode
design which reduces voltage concentrations by distributing
voltage gradients throughout the entire capacitor.
This unique design also affords increased capacitance values in
a given case size and voltage rating. The capacitors are designed
and manufactured to the general requirement of EIA198 and
are subjected to a 100% electrical testing making them well
suited for a wide variety of telecommunication, commercial, and
industrial applications.
APPLICATIONS
• Analog & Digital Modems
• LAN/WAN Interface
• Lighting Ballast Circuits
• Voltage Multipliers
• DC-DC Converters
• Back-lighting Inverters
Polyterm® soft termination option for demanding environments &
processes available on select parts, please contact the factory.
CASE SIZE
JDI /EIA
R15/0805
R18/1206
S41/1210
R29/1808
CAPACITANCE SELECTION
INCHES
(MM)
L
W
T
E/B
.080 ±.010
.050 ±.010
.055 Max.
.020 ±.010
(2.03 ±.25)
(1.27 ±.25)
(1.40)
(0.51±.25)
L
W
T
E/B
.125 ±.010
.062 ±.010
.067 Max.
.020 ±.010
(3.18 ±.25)
(1.57 ±.25)
(1.70)
(0.51±.25)
L
W
T
E/B
.125 ±.010
.095 ±.010
.080 Max.
.020 ±.010
(3.18 ±.25)
(2.41 ±.25)
(2.03)
(0.51±.25)
L
W
T
E/B
.185 ±.020
.080 ±.010
.085 Max.
.020 ±.010
(4.70 ±.51)
(2.03 ±.25)
(2.16)
(0.51±.25)
RATED
VOLTAGE
250 VDC
500 VDC
630 VDC
1000 VDC
250 VDC
500 VDC
630 VDC
1000 VDC
2000 VDC
3000 VDC
250 VDC
500 VDC
630 VDC
1000 VDC
2000 VDC
3000 VDC
500 VDC
630 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
6000 VDC
NP0 DIELECTRIC
MINIMUM
MAXIMUM
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
1.0
1.0
1.0
1.0
1.0
1.0
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
680
560
390
1500
1200
1000
220
82
3900
2700
1800
560
220
4700
3300
2200
820
470
180
75
75
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
X7R DIELECTRIC
MINIMUM
MAXIMUM
1000
1000
1000
100
1000
1000
1000
100
100
100
1000
1000
1000
100
100
100
1000
1000
100
100
100
100
47
47
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
0.022
0.010
6800
2700
0.068
0.033
0.027
0.010
4700
1000
0.150
0.068
0.047
0.015
4700
1000
0.100
0.047
0.022
0.010
3300
1800
390
150
µF
µF
pF
pF
µF
µF
µF
µF
pF
pF
µF
µF
µF
µF
pF
pF
µF
µF
µF
µF
pF
pF
pF
pF
Available cap. values include these significant retma values and their multiples: 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2
( 1.0 = 1.0, 10, 100, 1000, etc.) Consult factory for non-retma values and sizes or voltages not shown.
6
www.johanson dielectrics.com
HIGH VOLTAGE SURFACE MOUNT MLCCS 250 - 6,000 VDC
CASE SIZE
JDI /EIA
INCHES
CAPACITANCE SELECTION
(MM)
S43 / 1812
S49 / 1825
S47 / 2220
S48 / 2225
L
W
T
E/B
.177 ±.012
.125 ±.010
.110 Max.
.025 ±.015
(4.50 ±.30)
(3.18 ±.25)
(2.80)
(0.64±.38)
L
W
T
E/B
.180 ±.010
.250 ±.010
.140 Max.
.025 ±.015
(4.57 ±.25)
(6.35 ±.25)
(3.56)
(0.64±.38)
L
W
T
E/B
.225 ±.015
.200 ±.015
.150 Max.
.025 ±.015
(5.72 ±.38)
(5.08 ±.38)
(3.81)
(0.64±.38)
L
W
T
E/B
.225 ±.010
.255 ±.015
.160 Max.
.025 ±.015
(5.72 ±.25)
(6.48 ±.38)
(4.06)
(0.64±.38)
NP0 DIELECTRIC
MINIMUM
MAXIMUM
RATED
VOLTAGE
250 VDC
500 VDC
630 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
6000 VDC
500 VDC
630 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
6000 VDC
500 VDC
630 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
6000 VDC
500 VDC
630 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
6000 VDC
100 pF
100 pF
10 pF
10 pF
10 pF
10 pF
10 pF
10 pF
100 pF
100 pF
10 pF
10 pF
10 pF
10 pF
10 pF
10 pF
1000 pF
1000 pF
100 pF
100 pF
10 pF
10 pF
10 pF
10 pF
1000 pF
1000 pF
100 pF
100 pF
10 pF
10 pF
10 pF
10 pF
8200 pF
6800 pF
5600 pF
1800 pF
1000 pF
390 pF
150 pF
150 pF
0.018 µF
0.015 µF
0.012 µF
5600 pF
2200 pF
1200 pF
390 pF
390 pF
0.018 µF
0.018 µF
0.015 µF
5600 pF
2700 pF
1500 pF
470 pF
470 pF
0.027 µF
0.022 µF
0.018 µF
8200 pF
3300 pF
1800 pF
470 pF
470 pF
X7R DIELECTRIC
MINIMUM
MAXIMUM
0.010 µF
1000 pF
1000 pF
1000 pF
100 pF
100 pF
100 pF
100 pF
10 pF
0.01 µF
0.01 µF
1000 pF
100 pF
100 pF
100 pF
100 pF
100 pF
0.01 µF
0.01 µF
1000 pF
1000 pF
100 pF
100 pF
100 pF
100 pF
0.01 µF
0.01 µF
1000 pF
1000 pF
100 pF
100 pF
100 pF
100 pF
0.470 uF
0.330 uF
0.120 µF
0.100 µF
0.010 µF
4700 pF
1200 pF
820 pF
330 pF
0.390 µF
0.270 µF
0.180 µF
0.039 µF
8200 pF
2200 pF
1500 pF
820 pF
0.470 µF
0.270 µF
0.120 µF
0.039 µF
0.010 µF
2700 pF
1500 pF
820 pF
0.560 µF
0.390 µF
0.180 µF
0.056 µF
0.012 µF
3300 pF
2700 pF
1200 pF
Available cap. values include these significant retma values and their multiples: 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2
( 1.0 = 1.0, 10, 100, 1000, etc.) Consult factory for non-retma values and sizes or voltages not shown.
ELECTRICAL CHARACTERISTICS
W
L
T
E/B
Meets the standard NP0 & X7R dielectric specifications listed on page 71
DIELECTRIC WITHSTANDING VOLTAGE
DWV = 1.5 X rated WVDC for ratings 500-999 WVDC,
DWV = 1.2 X rated WVDC for ratings ≥ 1,000 WVDC
NOTE: Capacitors may require a surface coating to prevent external arcing. Solder mask should not be used beneath
capacitors. For more information see JDI Tech Note “Surface Arc Season”
HOW TO ORDER HIGH VOLTAGE SURFACE MOUNT
P/N written: 202R18W102KV4E
202
R18
W
102
K
V
4
E
VOLTAGE
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
PACKING
R15 = 0805
R18 = 1206
R29 = 1808
S41 = 1210
S43 = 1812
S47 = 2220
S48 = 2225
S49 = 1825
N = NP0
W = X7R
1st two digits are significant; third digit denotes
number of zeros.
102 = 1000 pF
104 = 0.10 µF
J = ± 5%
K = ± 10%
M = ± 20%
V = NI Barrier with 100%
Sn Plating (Matte)
4 = Unmarked
6 = EIA Code
501
631
102
202
302
402
502
602
=
=
=
=
=
=
=
=
500 V
630 V
1000 V
2000 V
3000 V
4000 V
5000 V
6000 V
F = Polyterm
flexible termination
T = SnPb
www.johanson dielectrics.com
E
T
= Embossed 7”
= Punched 7”
No code = bulk
Tape specs.
per EIA RS481
7
AC SAFETY CAPACITORS
Johanson Dielectrics Type SC ceramic chip capacitors are
designed for AC voltage surge and lightning protection in lineto-ground interface applications in computer networks, modem,
facsimile and other equipment.
Johanson’s safety capacitor offering includes four different case
sizes and NP0 and X7R dielectric materials.
These devices are surface mount ready with barrier terminations
and tape and reel packaging.
Information on capacitor safety ratings and certification details
may be found below.
W
L
T
SAFETY
RATING
X2
E/B
Polyterm® soft termination
option for demanding
environments & processes
available on select parts,
please contact the factory.
VOLTAGE
RATING
WITHSTANDING
VOLTAGE
IMPULSE
VOLTAGE
CASE
SIZE
JOHANSON
ORDERING P/N
250 VAC
1,500 VAC
2,500 V
1808
302R29______V3E-****-SC
STANDARDS: IEC 60384-14:2005, EN 60950 2001 • UL 60950-01 CERTIFICATIONS: TUV Rheinland R 50227900 • UL File E212609 • Semko 0026092-1 & 0003222-1
X2
250 VAC
1,500 VAC
2,500 V
1812
302S43______V3E-****-SC
1808
502R29______V3E-****-SC
STANDARDS: IEC 60384-14:2005, EN 60950:2001 CERTIFICATIONS: TUV Rheinland R 50227900
X1/Y2
250 VAC
1,500 VAC
5,000 V
STANDARDS: IEC 60384-14:2005 • UL 60950-01 CERTIFICATIONS: TUV Rheinland R 50227900 / UL File E212609
Y2
250 VAC
1,500 VAC
5,000 V
2211
502R30______V3E-****-SC
STANDARDS: IEC 60384-14:2005 • UL 60950-01 CERTIFICATIONS: TUV Rheinland R 50227900 • UL File: E212609
X1/Y2
250 VAC
1,500 VAC
5,000 V
2220
502S47______V3E-****-SC
STANDARDS: IEC 60384-14:2005 • UL 60950-01 CERTIFICATIONS: TUV Rheinland R 50227900 • UL File: E212609
X Capacitors are defined as suitable for use in situations where failure of the capacitor would not lead to danger of electric shock.
Y Capacitors are defined as suitable for use in situations where failure of the capacitor could lead to danger of electric shock.
8
www.johanson dielectrics.com
R29 / 1808
X2
S43 / 1812
X2
R29 / 1808
X1/Y2
S43 / 1812
X1/Y2
R30 / 2211
Y2
S47 / 2220
X1/Y2
L
W
T
E/B
.185 ±.015
.080 ±.010
.085 Max.
.020 ±.010
(4.70 ±.38)
(2.03 ±.25)
(2.16)
(0.51±.25)
L
W
T
E/B
.175 ±.010
.125 ±.010
.115 Max.
.025 ±.015
(4.45 ±.25)
(3.18 ±.25)
(2.92)
(0.64±.38)
L
W
T
E/B
.185 ±.015
.080 ±.015
.085 Max.
.012 ±.015
(4.70 ±.38)
(2.03 ±.38)
(2.16)
(0.30±.38)
L
W
T
E/B
.175 ±.010
.125 ±.010
.115 Max.
.025 ±.015
(4.45 ±.25)
(3.18 ±.25)
(2.92)
(0.64±.38)
L
W
T
E/B
.225 ±.016
.110 ±.010
.115 Max.
.020 ±.010
5.72 ±.40)
(2.80 ±.25)
(2.92)
(0.51±.25)
L
W
T
E/B
.225 ±.015
.200 ±.015
.150 Max.
.025 ±.015
(5.72 ±.38)
(5.08 ±.38)
(3.81)
(0.64±.38)
4700 pF
3300 pF
2700 pF
2200 pF
1800 pF
1500 pF
1200 pF
1000 pF
680 pF
560 pF
470 pF
330 pF
270 pF
220 pF
180 pF
DIELECTRIC
NP0
X7R
HOW TO ORDER AC SAFETY CAPACITORS
502
150 pF
120 pF
100 pF
68 pF
56 pF
47 pF
33 pF
27 pF
22 pF
18 pF
15 pF
(MM)
12 pF
INCHES
10 pF
SAFETY CERTIFIED
5 pF
AC SAFETY CAPACITORS
P/N written: 302R29W102MV3E-****-SC
R29
W
102
M
V
3
VOLTAGE
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
PACKING
302 = 250VAC
[2500V Impulse]
502 = 250VAC
[5000V Impulse]
R29=1808
R30=2211
S43=1812
S47=2220
AC2=2220
N = NP0
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros, R = decimal.
102 = 1000 pF
104 = 0.10 µF
5R0 = 5.0pF
J = ± 5%
K = ± 10%
M = ± 20%
V = NI Barrier with
100% Sn Plating
(Matte)
3 = Required
Safety Mark
E = Embossed 7”
F = Polyterm
flexible termination
www.johanson dielectrics.com
E
No code = bulk
-****-SC
TYPE
SC = Safety
Certified
Tape specs.
per EIA RS481
9
X2Y FILTER & DECOUPLING CAPACITORS
®
X2Y® filter capacitors employ a unique, patented low inductance design featuring two balanced capacitors
that are immune to temperature, voltage and aging performance differences.
These components offer superior decoupling and EMI filtering performance, virtually eliminate parasitics, and
can replace multiple capacitors and inductors saving board space and reducing assembly costs.
152 3000pF 1500pF
222 4400pF 2200pF
472 9400pF 4700pF
.020µF .010µF
.030µF .015µF
.044µF .022µF
.078µF .039µF
.094µF .047µF
0.20µF 0.10µF
0.36µF 0.18µF
103
153
223
393
473
104
184
50
50
16
25
25
16
10
100 100 100 100 100 50
50
1206 (X18
NP0
X7R
1210 (X41)
X7R
1410 (X44)
X7R
1812 (X43)
X7R
10
10
16
16
10
100 100
25
100 100 100 100 100 100 100 50
100 100 100 100 100 100 100 100 50
X7R
NP0
10
10
X5R
0805 (X15)
16
50
100 100 100 100 100 100 100 100 50
X7R
1.0µF
102 2000pF 1000pF
50
2.0µF
940pF 470pF
471
50
105
440pF 220pF
221
50
0.94µF 0.47µF
200pF 100pF
101
50
X7R
474
47pF
94pF
470
50
0.80µF 0.40µF
33pF
66pF
330
50
404
27pF
54pF
270
50
0.68µF 0.33µF
22pF
44pF
220
50
334
10pF
20pF
100
50
0.44µF 0.22µF
<20pF <10pF
XRX
50
NP0
0603 (X14)
Amplifier FIlter & Decoupling
High Speed Data Filtering
EMC I/O Filtering
FPGA / ASIC / µ-P Decoupling
DDR Memory Decoupling
50
Power Bypass
(2 Y-Caps.)
0402 (X07)
•
•
•
•
•
NP0
EMI Filtering
(1 Y-Cap.)
SIZE
One device for EMI suppression or decoupling
Replace up to 7 components with one X2Y
Differential and common mode attenuation
Matched capacitance line to ground, both lines
Low inductance due to cancellation effect
CAP.
CODE
•
•
•
•
•
APPLICATIONS
224
ADVANTAGES
VOLTAGE
RATINGS
6.3 = 6.3 VDC
10 = 10 VDC
16 = 16 VDC
25 = 25 VDC
50 = 50 VDC
100 = 100 VDC
500 = 500 VDC
50
50
25
10
100
100 100 100
100 100
500
100
500
16
100
500
100
Contact factory for part combinations not shown.
Filtering capacitance is specified as Line-to-Ground ( Terminal A or B to G)
Power Bypass capacitance is specified Power-to-Ground (A + B to G)
Rated voltage is from line to ground in Circuit 1, power to ground in Circuit 2 .
HOW TO ORDER X2Y® CAPACITORS
P/N written: 101X14W102MV4T
100
X14
W
102
M
V
4
T
VOLTAGE
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
PACKING
X07 = 0402
X14 = 0603
X15 = 0805
X18 = 1206
X41 = 1210
X44 = 1410
X43 = 1812
N = NP0
W = X7R
X = X5R
6R3
100
160
250
500
101
501
=
=
=
=
=
=
=
6.3 V
10 V
16 V
25 V
50 V
100 V
500 V
1st two digits are signifiM = ± 20%
V = NI Barrier with 100%
cant; third digit denotes
* D = ± 0.50 pF
Tin Plating (Matte)
number of zeros, R =
*Values
<
10
pF
only
F = Polyterm
decimal.
flexible termination
102 = 1000 pF
104 = 0.10 µF
T = SnPb
5R6 = 5.6pF
4 = Unmarked
(Not available)
X2Y® technology patents and registered trademark under license from X2Y ATTENUATORS, LLC
10
www.johanson dielectrics.com
E = Embossed 7”
T = Punched 7”
No code = bulk
Tape specs.
per EIA RS481
X2Y FILTER & DECOUPLING CAPACITORS
®
Power Bypass S21
Power-to-Ground
EMI Filtering S21
Signal-to-Ground
Labeled capacitance values below follow the P/N order code (single Y cap value)
Effective capacitance measured in Circuit 2 is 2X of the labled single Y cap value.
0.10Ω
Approximate Impedance (Ω)
1.00Ω
1.00Ω
0.10Ω
Approximate Impedance (Ω)
10.0Ω
10.0Ω
0.01Ω
0.01Ω
ELECTRICAL
CHARACTERISTICS
NP0
X7R
X5R
TEMPERATURE COEFFICIENT:
0±30ppm/°C (-55 to +125°C)
±15% (-55 to +125°C)
±15% (-55 to +85°C)
DIELECTRIC STRENGTH:
Vrated ≤100VDC: DWV = 2.5 X WVDC, 25°C, 50mA max.
Vrated = 500VDC: DWV = 1.5 X WVDC,
25°C, 50mA max.
WVDC ≥ 50 VDC: 2.5% max.
WVDC = 25 VDC: 3.5% max.
WVDC ≥ 50 VDC: 5% max.
0.1% max.
WVDC = 10-16 VDC: 5.0% max.
WVDC ≤ 25 VDC: 10% max.
WVDC = 6.3 VDC: 10% max.
C≤ 0.047µF: 1000 ΩF or 100 GΩ, whichever is less
C> 0.047µF: 500 ΩF or 10 GΩ, whichever is less
DISSIPATION FACTOR:
INSULATION RESISTANCE
(MIN. @ 25°C, WVDC)
C > 100 pF; 1kHz ±50Hz; 1.0±0.2 VRMS
C ≤ 100 pF; 1Mhz ±50kHz; 1.0±0.2 VRMS
TEST CONDITIONS:
OTHER:
1.0kHz±50Hz @ 1.0±0.2 Vrms
See page 71 for additional dielectric specifications.
Equivalent Circuits
Cross-sectional View
A
G1
G2
W
Dimensional View
G
CB
A
CB
B
EB
T
W
L
G
B
EB
CASE SIZE
T
0402 (X07)
IN
MM
0603 (X14)
IN
MM
0805 (X15)
IN
MM
1206 (X18)
IN
MM
1210 (X41)
IN
MM
L
1410 (X44)
IN
MM
1812 (X43)
IN
MM
L
0.045 ±
0.003
1.143 ±
0.076
0.064 ±
0.005
1.626 ±
0.127
0.080 ±
0.008
2.032 ±
0.203
0.124 ±
0.010
3.150 ±
0.254
0.125 ±
0.010
3.175 ±
0.254
0.140 ±
0.010
3.556 ±
0.254
0.174 ±
0.010
4.420 ±
0.254
W
0.025 ±
0.003
0.635 ±
0.076
0.035 ±
0.005
0.889 ±
0.127
0.050 ±
0.008
1.270 ±
0.203
0.063 ±
0.010
1.600 ±
0.254
0.098 ±
0.010
2.489 ±
0.254
0.098 ±
0.010
2.490 ±
0.254
0.125 ±
0.010
3.175 ±
0.254
T
0.020
max
0.508
max
0.026
max
0.660
max
0.040
max
1.016
max
0.050
max
1.270
max
0.070
max
1.778
max
0.070
max
1.778
max
0.090
max
2.286
max
EB
0.008 ±
0.003
0.203 ±
0.076
0.010 ±
0.006
0.254 ±
0.152
0.012 ±
0.008
0.305 ±
0.203
0.016 ±
0.010
0.406 ±
0.254
0.018 ±
0.010
0.457 ±
0.254
0.018 ±
0.010
0.457 ±
0.254
0.022 ±
0.012
0.559 ±
0.305
CB
0.012 ±
0.003
0.305 ±
0.076
0.018 ±
0.004
0.457 ±
0.102
0.022 ±
0.005
0.559 ±
0.127
0.040 ±
0.005
1.016 ±
0.127
0.045 ±
0.005
1.143 ±
0.127
0.045 ±
0.005
1.143 ±
0.127
0.045 ±
0.005
1.143 ±
0.127
www.johanson dielectrics.com
11
X2Y FILTER & DECOUPLING CAPACITORS
®
THE X2Y® DESIGN - A BALANCED, LOW ESL, “CAPACITOR CIRCUIT”
The X2Y® capacitor design starts with standard 2 terminal MLC capacitor’s opposing electrode sets, A & B, and adds a third electrode set (G) which
surround each A & B electrode. The result is a highly vesatile three node capacitive circuit containing two tightly matched, low inductance capacitors
in a compact, four-terminal SMT chip.
EMI FILTERING:
The X2Y® component contains two shunt or “line-to-ground” Y capacitors. Ultra-low ESL (equivalent
series inductance) and tightly matched inductance of these capacitors provides unequaled high frequency
Common-Mode noise filtering with low noise mode conversion. X2Y® components reduce EMI emissions
far better than unbalanced discrete shunt capacitors or series inductive filters. Differential signal loss is
determined by the cut off frequency of the single line-to-ground (Y) capacitor value of an X2Y®.
POWER BYPASS / DECOUPLING
For Power Bypass applications, X2Ys® two “Y” capacitors are connected in parallel. This doubles the total
capacitance and reduces their mounted inductance by 80% or 1/5th the mounted inductance of similar sized
MLC capacitors enabling high-performance bypass networks with far fewer components and vias. Low ESL
delivers improved High Frequency performance into the GHz range.
GSM RFI ATTENUATION IN AUDIO & ANALOG
GSM handsets transmit in the 850 and 1850 MHz bands using a TDMA pulse
rate of 217Hz. These signals cause the GSM buzz heard in a wide range of audio
products from headphones to concert hall PA systems or “silent” signal errors
created in medical, industrial process control, and security applications. Testing
was conducted where an 840MHz GSM handset signal was delivered to the
inputs of three different amplifier test circuit configurations shown below whose
outputs were measured on a HF spectrum analyzer.
1) No input filter, 2 discrete MLC 100nF power bypass caps.
2) 2 discrete MLC 1nF input filter, 2 discrete MLC 100nF power bypass caps.
3) A single X2Y 1nF input filter, a single X2Y 100nF power bypass cap.
X2Y configuration provided a nearly flat response above the ambient and up to
10 dB imrpoved rejection than the conventional MLCC configuration.
AMPLIFIER INPUT FILTER EXAMPLE
In this example, a single Johanson X2Y® component was used to filter noise at the input of a
DC instrumentation amplifier. This reduced component count by 3-to-1 and costs by over 70%
vs. conventional filter components that included 1% film Y-capacitors.
Parameter
X2Y®
10nF
Discrete
10nF, 2 @ 220 pF
Comments
DC offset shift
< 0.1 µV
< 0.1 µV
Referred to input
Common mode rejection
91 dB
92 dB
Source: Analog Devices, “A Designer’s Guide to Instrumentation Amplifiers (2nd Edition)” by Charles Kitchin and Lew Counts
12
www.johanson dielectrics.com
X2Y FILTER & DECOUPLING CAPACITORS
®
COMMON MODE CHOKE REPLACEMENT
• Superior High Frequency Emissions Reduction
• Smaller Sizes, Lighter Weight
• No Current Limitation
• Vibration Resistant
• No Saturation Concerns
See our website for a detailed application note with component
test comparisons and circuit emissions measurements.
Measured Common Mode Rejection
PARALLEL CAPACITOR SOLUTION
A common design practice is to parallel decade capacitance values to
extend the high frequency performance of the filter network. This causes an
unintended and often over-looked effect of anti-resonant peaks in the filter
networks combined impedance. X2Y’s very low mounted inductance allows
designers to use a single, higher value part and completely avoid the antiresonance problem. The impedance graph on right shows the combined
mounted impedance of a 1nF, 10nF & 100nF 0402 MLC in parrallel in RED.
The MLC networks anti-resonance peaks are nearly 10 times the desired
impedance. A 100nF and 47nF X2Y are plotted in BLUE and GREEN. (The
total capacitance of X2Y (Circuit 2) is twice the value, or 200nF and 98nF in this
example.) The sigle X2Y is clearly superior to the three paralleled MLCs.
X2Y HIGH PERFORMANCE POWER BYPASS - IMPROVE PERFORMANCE, REDUCE SPACE & VIAS
Actual measured performance of two high performance SerDes FPGA designs demonstrate how a 13 component X2Y bypass network
significantly out performs a 38 component MLC network. For more information see http://johansondielectrics.com/pdfs/JDI_X2Y_STXII.pdf
www.johanson dielectrics.com
13
LOW INDUCTANCE CHIP CAPACITORS (LICC)
LICC capacitors are specially designed to exhibit lower inductance by altering
the aspect ratio of the terminations. The smaller current loop length results in
Equivalent Series Inductance (ESL) that is typically 60% lower then standard MLCs
of the same size. This ESL improvement is extremely advantageous in the high
frequency power decoupling of high speed digital MPU, FPGA, DSP, etc..
FEATURES
• Low Inductance
• High Series Resonant Frequency
• Sn-Pb and Polyterm® Termination Options
MLC
W
• Surface Mount
• Small Size
• RoHS Compliant
LICC
L
L
CASE SIZE
JDI
EIA
W
AVAILABLE CAPACITANCE
MM
B14
0306 0816
B15
0508 1220
B18
0612 1632
DIELECTRIC
10nF
22nF
47nF
0.10uF
0.22uF
X7R
25V
25V
25V
16V
6.3V
10V
25V
X5R
X7R
50V
50V
25V
0.47uF
1.00uF
2.2uF
10V
6.3V
6.3V
6.3V
16V
6.3V
6.3V
10V
10V
16V
6.3V
X5R
X7R
50V
50V
50V
50V
25V
X5R
10V
4.7uF
10uF
6.3V
6.3V
6.3V
10V
Please visit our website for complete specifications
HOW TO ORDER LICC CAPACITORS
100
B14
X
224
M
V
4
T
VOLTAGE
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
PACKING
B14 = 0306
B15 = 0508
B18 = 0612
W = X7R
X = X5R
4 = Unmarked
E = Embossed 7”
T = Punched 7”
6R3
100
160
250
500
14
P/N written: 101X14W102MV4T
=
=
=
=
=
6.3 V
10 V
16 V
25 V
50 V
1st two digits are signifiM = ± 20%
V = NI Barrier with 100%
cant; third digit denotes
Tin Plating (Matte)
*Values < 10 pF only
number of zeros
T = SnPb
103 = 0.01 µF (10NF)
104 = 0.10 µF
www.johanson dielectrics.com
(Not available)
No code = bulk
Tape specs.
per EIA RS481
CHIP FILTER / FEED-THRU CAPACITORS
Our Feed-Thru Capacitors provide excellent EMI, I/O & Power Line filtering
exhibiting much lower inductance than standard SMT capacitors which results in
broader frequency response. These are Precious Metal Electrode (PME) products
with higher current ratings than comparable Base Metal Electrode (BME) parts.
FEATURES
APPLICATIONS
•
•
•
•
• DC Power Line EMI Filter
• RF Immunity FIlter
• RF Amplifier Gain Filter
1 Amp Current Rating
Low Inductance, High SRF
Surface Mount Non-polarized
Sn-Pb and Polyterm® Options
CASE SIZE
JDI
EIA
AVAILABLE CAPACITANCE
MM
F14
0603 1608
F15
0805 2012
F18
1206 3216
DIELECTRIC 22pF
NP0
50V
47pF 100pF 220pF 470pF 1.0nF 2.2nF 4.7nF 10nF
50V
50V
25V
50V
50V
50V
50V
100V
100V
100V
100V
25V
25V
25V
25V
25V
25V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
X7R
NP0
47nF 100nF 220nF
50V
X7R
NP0
22nF
100V
X7R
100V
50V
Please visit our website for complete specifications
HOW TO ORDER CHIP FILTER / FEED-THRU
P/N written: 250F14W103YV4E
250
F14
W
103
Y
V
4
E
VOLTAGE
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
PACKING
F14 = 0603
F15 = 0805
F18 = 1206
N = NP0
W = X7R
V = Ni Barrier w/
100% Sn Plating
T = Ni Barrier w/
95%Sn/5%Pb Plating
4 = Unmarked
(Not available)
250
500
101
201
=
=
=
=
25 V
50 V
100 V
200 V
1st two digits are signifiK = ± 10%
cant; third digit denotes
M = ± 20%
number of zeros.
Y = + 50% -20%
102 = 1000 pF
103 = 0.01 µF
104 = 0.10 µF
www.johanson dielectrics.com
E
T
=Embossed 7”
=Punched 7”
No code = bulk
Tape specs.
per EIA RS481
15
HIGH TEMPERATURE SURFACE MOUNT MLCCS 200°C
Johanson’s high temperature MLCC series exhibit stable performance
across an extended operating temperature range of -55°C to +200°C.
Both Class I and Class II parts are available with DC voltage ratings of
50,100 and 200V satisfying a wide range of demanding applications.
FEATURES
APPLICATIONS
• Stable 200°C Operation
• Deep Hole Drilling Electronics
• Compact SMD Chip
• High Temperature Modules
• Polyterm® Termination Option
• Industrial Equipment
• Sn-Pb Termination Option
• Automotive
• Avionics
ELECTRICAL CHARACTERISTICS
NP0
X7R
OPERATING RANGE:
-55 to +200°C
-55 to +200°C
TEMPERATURE
COEFFICIENT:
0±30ppm/°C
(-55to+125°C)
0±15% (-55to+125°C)
200°C CAP. DROP:
-0.5% max.
-45% max.
DISSIPATION FACTOR:
0.001 (0.1%) max.
0.020 (2.0%) max.
AGING RATE:
None
<1.0% per decade
INSULATION RESISTANCE:
25°C IR >100GΩ or 1000ΩF (whichever
200°C IR >1ΩF or 100MΩ
is less)
WITHSTANDING VOLTAGE:
2.5 X WVDC for ratings ≤ 200 VDC
1.5 X WVDC for ratings 201-500 VDC
TEST CONDITIONS:
C > 100 pF; 1kHz ±50Hz; 1.0±0.2 VRMS
C ≤ 100 pF; 1Mhz ±50kHz; 1.0±0.2 VRMS
MECHANICAL CHARACTERISTICS
T07/0402
T14/0603
T15/0805
16
X7R Temp. Only
X7R Temp. & Rated Voltage (100%)
NP0 Temp. & Rated Voltage (100%)
RATED
VOLTAGE
L
W
T
E/B
Inches
.040 ±.004
.020 ±.004
.025 Max.
.008±.004
(mm)
(1.02 ±.10)
(0.51 ±.10)
(0.64)
(.20±.10)
L
W
T
E/B
Inches
.063 ±.008
.032 ±.008
.035 Max.
.010±.005
(mm)
(1.60 ±.20)
(0.81 ±.20)
(0.89)
(.25±.13)
L
W
T
E/B
Inches
.080 ±.010
.050 ±.010
.055 Max.
.020±.010
(mm)
(2.03 ±.25)
(1.27 ±.25)
(1.40)
(0.51±.25 )
25 VDC
50 VDC
NP0 DIELECTRIC
MINIMUM
MAXIMUM
10 pF
270 pF
10 pF
120 pF
X7R DIELECTRIC
MINIMUM
MAXIMUM
100 pF
4700 pF
100 pF
1500 pF
100 VDC
10 pF
82 pF
10 pF
390 pF
200 VDC
10 pF
50 pF
10 pF
100 pF
25 VDC
10 pF
820 pF
1000 pF
0.022 µF
50 VDC
10 pF
330 pF
1000 pF
0.010 µF
2200 pF
100 VDC
10 pF
220 pF
100 pF
200 VDC
10 pF
120 pF
100 pF
560 pF
25 VDC
100 pF
2200 pF
1000 pF
0.100 µF
50 VDC
100 pF
1500 pF
1000 pF
0.033 µF
100 VDC
100 pF
1000 pF
1000 pF
0.010 µF
200 VDC
10 pF
680 pF
100 pF
2200 pF
www.johanson dielectrics.com
HIGH TEMPERATURE SURFACE MOUNT MLCCS 200°C
MECHANICAL CHARACTERISTICS
T18/1206
T41/1210
T43/1812
T49/1825
T48/2225
W
RATED
VOLTAGE
L
W
T
E/B
Inches
.125 ±.010
.062 ±.010
.067 Max.
.020±.010
(mm)
(3.17 ±.25)
(1.57 ±.25)
(1.70)
(0.51±.25 )
L
W
T
E/B
Inches
.125 ±.010
.095 ±.010
.090 Max.
.020±.010
(mm)
(3.18 ±.25)
(2.41 ±.25)
(2.28)
(0.51±.25 )
L
W
T
E/B
Inches
.175 ±.010
.125 ±.010
.110 Max.
.025±.015
(mm)
(4.45 ±.25)
(3.17 ±.25)
(2.80)
(0.64±.38)
L
W
T
E/B
Inches
.180 ±.010
.250 ±.010
.140 Max.
.025±.015
(mm)
(4.57 ±.25)
(6.35 ±.25)
(3.56)
(0.64±.38)
L
W
T
E/B
Inches
.225 ±.010
.255 ±.015
.160 Max.
.025±.015
(mm)
(5.72 ±.25)
(6.48 ±.38)
(4.06)
(0.64±.38)
25 VDC
NP0 DIELECTRIC
MINIMUM
MAXIMUM
100 pF
6800 pF
X7R DIELECTRIC
MINIMUM
MAXIMUM
1000 pF
0.220 µF
50 VDC
100 pF
3300 pF
1000 pF
0.100 µF
100 VDC
100 pF
2200 pF
1000 pF
0.022 µF
200 VDC
100 pF
1500 pF
1000 pF
5600 pF
25 VDC
1000 pF
0.015 µF
0.047 µF
0.470 µF
50 VDC
1000 pF
5600 pF
0.047 µF
0.220 µF
100 VDC
100 pF
4700 pF
0.047 µF
0.056 µF
200 VDC
100 pF
3300 pF
0.047 µF
0.015 µF
25 VDC
1000 pF
0.033 µF
0.047 µF
1.000 µF
50 VDC
1000 pF
0.012 µF
0.047 µF
0.470 µF
100 VDC
1000 pF
0.010 µF
0.047 µF
0.180 µF
200 VDC
1000 pF
8200 pF
0.047 µF
0.047 µF
25 VDC
1000 pF
0.033 µF
0.10 µF
2.200 µF
50 VDC
1000 pF
0.027 µF
0.10 µF
1.000 µF
100 VDC
1000 pF
0.022 µF
0.10 µF
0.560 µF
200 VDC
1000 pF
0.018 µF
0.10 µF
0.150 µF
25 VDC
1000 pF
0.100 µF
0.10 µF
3.300 µF
50 VDC
1000 pF
0.039 µF
0.10 µF
1.500 µF
100 VDC
1000 pF
0.033 µF
0.10 µF
0.820 µF
200 VDC
1000 pF
0.022 µF
0.10 µF
0.220 µF
L
T
E/B
HOW TO ORDER 200°C MLCCS
500
VOLTAGE
250
500
101
201
=
=
=
=
25 V
50 V
100 V
200 V
T14
W
SIZE
T07 = 0402
T14 = 0603
T15 = 0805
T18 = 1206
T41 = 1210
T43 = 1812
T49 = 1825
T48 = 2225
P/N written: 500T14W103KV4E
103
K
V
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
N = NP0
W = X7R
1st two digits are significant; third digit denotes
number of zeros.
NP0
V = Ni Barrier w/
100% Sn Plating (150°C)
4 = Unmarked
(Not available)
102 = 1000 pF
103 = 0.01 µF
104 = 0.10 µF
J = ± 5%
K = ± 10%
X7R
K = ± 10%
M = ± 20%
T = Ni Barrier w/
95%Sn/5%Pb Plating (150°C)
E = Ni Barrier w/
100% Sn Plating (180°C)
4
E
PACKING
E = Embossed 7”
T = Punched 7”
No code = bulk
Tape specs.
per EIA RS481
P = Palladium Silver Pd-Ag
(200°C)
www.johanson dielectrics.com
17
TANCERAM CHIP CAPACITORS
®
TANCERAM® chip capacitors can replace tantalum capacitors
in many applications and offer several key advantages over
traditional tantalums. Because TANCERAM® capacitors exhibit
extremely low ESR, equivalent circuit performance can often be
achieved using considerably lower capacitance values. Low
DC leakage reduces current drain, extending the battery life of
portable products. TANCERAM® high DC breakdown voltage
ratings offer improved reliability and eliminate large voltage
de-rating common when designing with tantalums.
ADVANTAGES
• Low ESR
• Low DC Leakage
• Higher Surge Voltage
• Non-polarized Devices
• Reduced CHIP Size
• Improved Reliability
• Higher Insulation Resistance • Higher Ripple Current
APPLICATIONS
• Switching Power Supply Smoothing (Input/Output)
• Backlighting Inverters
• DC/DC Converter Smoothing (Input/Output)
• General Digital Circuits
HOW TO ORDER TANCERAM®
18
Part number written: 100R15X106MV4E
100
R15
X
106
M
V
4
E
VOLTAGE
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
PACKING
6R3 = 6.3 V
100 = 10 V
160 = 16 V
250 = 25 V
500 = 50 V
101 = 100 V
See Chart
W = X7R
X = X5R
1st two digits are
significant; third digit
denotes number of
zeros.
105 = 1.00 µF
476 = 47.0 µF
107 = 100 µF
K = ±10%
M = ±20%
V = Nickel Barrier
with 100% Tin
Plating (Matte)
4 = Unmarked
Code Type Reel
E
Plastic 7”
T
Paper 7”
Tape specifications
conform to EIA
RS481
T = SnPb*
(*available on
select parts)
www.johanson dielectrics.com
DIELECTRIC
TANCERAM CHIP CAPACITORS
®
W (X7R)
W
L
T
E/B
X (X5R)
CASE SIZE
EIA / JDI
CAPACITANCE SELECTION
INCHES
(mm)
VDC
0402
R07
L
W
T
EB
.040 ±.004
.020 ±.004
.025 Max.
.008 ±.004
(1.02 ±.10)
(0.51 ±.10)
(0.64)
(0.20±.10)
0603
R14
L
W
T
EB
.063 ±.008
.032 ±.008
.035 Max.
.010±.005
(1.60 ±.20)
(0.81 ±.20)
(0.89)
(.25±.13)
0805
R15
L
W
T
EB
.080 ±.010
.050 ±.010
.060 Max.
.020±.010
(2.03 ±.25)
(1.27 ±.25)
(1.52)
(0.51±.25 )
1206
R18
L
W
T
EB
.125 ±.013
.062 ±.010
.070 Max.
.020 +.015-0.01
(3.17 ±.35)
(1.57 ±.25)
(1.78)
(0.51+.38-.25)
1210
S41
L
W
T
EB
.126 ±.016
.098 ±.012
.110 Max.
.020 +.015-.010
(3.20 ±.40)
(2.50 ±.30)
(2.8)
(0.51+.38-.25)
1812
S43
L
W
T
EB
.177 ±.016
.126 ±.015
.140 Max.
.035 ±.020
(4.50 ±.40)
(3.20 ±.38)
(3.55)
(0.89 ±0.51)
1.0 µF
2.2 µF
3.3 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
W
W
W
W
W
W
W
W
16
10
6.3
25
16
10
6.3
50
25
16
10
6.3
100
50
35
25
16
10
6.3
100
50
35
25
16
10
6.3
100
50
25
16
10
6.3
X
X
X
X
X
X
X
X
ELECTRICAL CHARACTERISTICS
DIELECTRIC:
X7R
TEMPERATURE COEFFICIENT:
DISSIPATION FACTOR:
INSULATION RESISTANCE (MIN. @ 25°C, WVDC)
DIELECTRIC STRENGTH:
TEST CONDITIONS:
OTHER:
X5R
±15% (-55 to +125°C)
±15% (-55 to +85°C)
For ≥ 50 VDC: 5% max.
For ≤ 35 VDC: 10% max.
For ≥ 50 VDC: 5% max.
For ≤ 35 VDC: 10% max.
100 ΩF or 10 GΩ, whichever is less
2.5 X WVDC, 25°C, 50mA max.
Capacitance values ≤ 10 µF: 1.0kHz±50Hz @ 1.0±0.2 Vrms
Capacitance values > 10 µF: 120Hz±10Hz @ 0.5V±0.1 Vrms
See page 71 for additional dielectric specifications.
www.johanson dielectrics.com
19
102
391
331
271
221
181
151
121
101
820
680
560
470
390
330
270
220
180
150
120
100
821
50V
102
.063 ±.008
.032 ±.008
.035 Max.
.010±.005
(1005)
681
0603
25V
821
.040 ±.004
.020 ±.004
.025 Max.
.008 ±.004
(0.60 ±.03)
(0.30 ±.03)
(0.30 ±.03)
(0.15±.05)
681
0402
(0603)
561
L
W
T
EB
.024 ±.001
.012 ±.001
.012 ±.001
.006 ±.002
471
R14
L
W
T
EB
0201
561
R07
L
W
T
EB
(mm)
471
R05
Inches
0R5
JDI
AVAILABLE CAPACITANCE CODE
XRX
CASE SIZE
Voltage
SURFACE MOUNT MLCCS 10 - 200 VDC
16V
10V
(1.02 ±.10)
(0.51 ±.10)
(0.64)
(0.20±.10)
25V
(1608)
200V
16V
10V
(1.60 ±.20)
(0.81 ±.20)
(0.89)
(.25±.13)
100V
(2012)
200V
50V
25V
16V
R15
L
W
T
EB
0805
.080 ±.010
.050 ±.010
.050 Max.
.020±.010
(2.03 ±.25)
(1.27 ±.25)
(1.27)
(0.51±.25 )
100V
(3216)
200V
50V
25V
16V
R18
S41
L
W
T
EB
L
W
T
EB
1206
.125 ±.010
.062 ±.010
.050 Max.
.020 ±.010
1210
.125 ±.010
.095 ±.010
.065 Max.
.020 ±.010
(3.17 ±.25)
(1.57 ±.25)
(1.27)
(0.51 ±.25)
100V
(3224)
200V
50V
25V
(3.18 ±.25)
(2.41 ±.25)
(1.65)
(0.51 ±.25)
100V
(4532)
200V
NP0
X7R
X5R
50V
W
25V
L
16V
T
E/B
100V
50V
HOW TO ORDER - SURFACE MOUNT MLCC
391
331
271
221
181
151
121
101
820
680
Part number written: 100R07W104KV4E
100
R 07
W
104
K
V
4
E
VOLTAGE
SERIES/SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
PACKING
R05 = 0201
R07 = 0402
R14 = 0603
R15 = 0805
R18 = 1206
S41 = 1210
S43 = 1812
N = NP0
W = X7R
X = X5R
1st two digits are
significant; third
digit denotes
number of zeros,
R = decimal.
V = Nickel Barrier
with 100% Tin
Plating (Matte)
3 = Special
4 = Unmarked
6 = EIA Code*
T = SnPb
*Not available
on sizes
≤ 0402
E = Embossed 7”
T = Punched 7”
U = Embossed 13”
R = Punched 13”
No code = bulk
100 = 10 V DC
160 = 16 V DC
250 = 25 V DC
500 = 50 V DC
101 = 100 V DC
201 = 200 V DC
20
560
470
390
330
270
220
180
25V
150
(4.45 ±.25)
(3.17 ±.25)
(2.16)
(0.64 ±.38)
120
.175 ±.010
.125 ±.010
.085 Max.
.025 ±.015
100
1812
0R5
L
W
T
EB
XRX
S43
5R6 = 5.6 pF
100 = 10 pF
102 = 1,000 pF
474 = 0.47 µF
* B = ± 0.10 pF
* C = ± 0.25 pF
* D = ± 0.50 pF
*F=±1%
* G = ± 2%
* J = ± 5%
* K = ± 10%
* M = ± 20%
*Values < 10 pF
only
www.johanson dielectrics.com
Tape specifications
on page 48. Not all
tape styles are available on all parts.
107
476
106
475
335
225
105
474
334
224
104
823
683
563
473
333
273
223
183
153
123
103
822
562
472
392
332
272
222
182
152
122
AVAILABLE CAPACITANCE CODE
NP0
X7R
X5R
Voltage
SURFACE MOUNT MLCCS 10 - 200 VDC
CASE
SIZE
25V
0201
R05
16V
10V
50V
25V
16V
0402
R07
10V
200V
100V
50V
25V
0603
R14
16V
200V
100V
50V
See Tanceram High
Capacitance Series
for values ≥ 1.0µF
25V
0805
R15
16V
200V
100V
50V
1206
R18
25V
200V
100V
50V
25V
1210
S41
16V
200V
100V
50V
1812
S43
107
476
106
475
335
225
105
474
334
224
104
823
683
563
473
333
273
223
183
153
123
103
822
562
472
392
332
272
222
182
152
122
25V
ELECTRICAL CHARACTERISTICS
Please refer to page 71 of the catalog or www.johansondielectrics.com
www.johanson dielectrics.com
21
STACKED SMPS CERAMIC CAPACITORS
Stacked Switch-Mode ceramic capacitors feature large
capacitance values and exhibit low ESR (equivalent series
resistance) and low ESL (equivalent series inductance) making
them well suited for high power and high frequency applications
where tantalum or aluminum electrolytic capacitors may not
be suitable. The P-Series feature mechanical and pin-out
configurations per DSCC 87106 and 88011 drawings while the
E-Series feature mechanical and pin-out configurations more
common in European design applications.
KEY FEATURES
• P-Series Approved to DSCC Drawings 87106 & 88011
MIL-PRF-49470
• New T-Series 200°C for downhole tools and aircraft engine
control applications.
• E-Series Common European Lead Styles available to
MIL-PRF-49470 requirements.
• NP0 & X7R Dielectrics, 50 to 500 VDC Ratings
• Low ESR / Low ESL, Ideal for SMPS Filtering Applications
• Custom Sizes, Voltages,
and Values Available
D
E
B A
CASE SIZE
F
.010"± .002
.250" MIN
.055" ± .010
STRAIGHT LEAD
.100" MAX
.025" MIN
D
.020" ± .002
C
L-LEAD
J-LEAD
.100" TYP
E
.070"±.010
F
.010"± .002
.250" MIN
.055" ± .010
.020" ± .002
.100" MAX
.025" MIN
C
.100" TYP
HOW TO ORDER STACKED
.050"SMPS
min
.070"±.010
Part number written: 201P03W275KJ4H
.050" min
201
P03
W
275
K
J
4
H
VOLTAGE
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
PACKING
See Chart
N = NP0
B = BX
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros.
101 = 100 pF
102 = 1000 pF
103 = 0.01 µF
105 = 1.00 µF
J = ±5%
K= ±10%
L = ±15%
M = ±20%
N = ±30%
Z = +80% -20%
P = +100% -0%
J = “J” Leads
(formed in)
K = “J” Leads with
reduced height of
.045” ±.010”
L = “L” Leads
(formed out)
M = “L” Leads with
reduced height of
.045” ±.010”
N = Straight Lead
4 = Standard
3 = Specified
500
101
201
501
22
.050" min
.050" min
B A
=
=
=
=
50 V
100 V
200 V
500 V
www.johanson dielectrics.com
T = Tape and Reel
H = High Reliability
testing per customer
requirements
S = Special Part
STACKED SMPS CERAMIC CAPACITORS
P-SERIES DSCC STYLE X7R CAPACITANCE / VOLTAGE SELECTION
CASE
SIZE
CHIP
LAYERS
P05
P55
P04
P54
P03
P53
P01
P51
P02
P52
P06
P56
1
5
1
5
1
5
1
5
1
5
1
5
LEADS
/SIDE
X7R MAX CAPACITANCE (µF)
MECHANICAL SIZE RANGE (IN.)
LENGTH (D)
WIDTH (E)
3
0.275
0.300
4
0.425
0.440
10
1.075
0.500
20
2.075
0.500
15
1.535
0.870
20
2.075
1.350
TMAX (B)
.185
.715
.185
.715
.185
.715
.185
.715
.185
.715
.185
.715
50V
3.0
15
9.0
45
28
140
50
250
75
370
160
800
100V
200V
500V
2.2
11
6.5
32
20
100
40
200
55
270
110
550
1.0
5.0
3.0
15
9.5
47
19
95
25
125
50
250
0.50
2.5
1.5
7.5
4.7
23
9.4
46
14
70
25
125
Please refer to our website for complete offering including NP0 & BX capacitance ranges.
NEW 200°C T-SERIES CAPACITANCE / VOLTAGE SELECTION
CASE
SIZE
CHIP
LAYERS
T05
T55
T04
T54
T03
T53
1
5
1
5
1
5
LEADS
/SIDE
MAX CAPACITANCE (µF)
MECHANICAL SIZE RANGE (IN.)
LENGTH (D)
WIDTH (E)
3
0.275
0.300
4
0.425
0.440
10
1.075
0.500
TMAX (B)
50V
100V
200V
.185
.715
.185
.715
.185
.715
1.20
5.60
2.70
15.0
10.0
47.0
0.68
3.30
1.50
8.20
5.60
27.0
0.33
1.50
0.82
3.90
2.70
12.0
Please refer to our website for complete offering including NP0 capacitance ranges.
E-SERIES EUROPEAN STYLE X7R CAPACITANCE / VOLTAGE SELECTION
CASE
SIZE
CHIP
LAYERS
E24
E54
E26
E56
E21
E51
E28
E58
E29
E59
1
4
1
4
1
4
1
4
1
4
LEADS
/SIDE
X7R MAX CAPACITANCE (µF)
MECHANICAL SIZE RANGE (MM)
LENGTH (D)
WIDTH (E)
3
8.7
9.2
5
13.6
14.9
6
16.6
21.6
14
38.2
12.0
14
40.6
24.0
TMAX (B)
50V
100V
200V
500V
3.8
14.8
3.
14.8
3.8
14.8
3.8
14.8
3.8
14.8
5.0
20
16
64
30
120
35
140
75
300
4.0
16
12
48
22
88
25
100
50
200
2.5
10
7.5
30
14
56
16
64
35
140
1.0
4.0
3.3
13
6.0
24
7.0
28
16
64
Please refer to our website for complete offering including NP0 & BX capacitance ranges.
www.johanson dielectrics.com
23
MINI SWITCH-MODE CAPACITORS
®
JDI’s Mini Switch-Mode® ceramic capacitors combine the
advantages of high capacitance found in tantalum capacitors
with very low ESR performance of ceramic capacitors. The “J”
and “L” lead configurations replace 1825 and 2225 SMT chips to
provide stress relief and prevent cracking due to thermal cycling
or mechanical board flexing. Another plus of the J-lead style is
that this configuration allows use of the same solder lands as
the SMT chips. See the Stacked Switch-Mode section for larger
values. See also the Technical Notes on soldering and handling
and suggested solder lands.
FEATURES
• High Capacitance, Small Size
• Low ESR/ESL
• Leadframe reduces thermal & mechanical stress due to
board flexure and TCE mismatch
APPLICATIONS
• DC-DC Converters
• Power Supply Input & Output Filters
CAPACITANCE SELECTION
24
NP0 Max Capacitance (uF)
X7R Max Capacitance (uF)
SIZE
CODE
EIA CHIP
SIZE
25V
50V
100V
200V
500V
25V
50V
100V
200V
500V
P09
1825
0.056
0.047
0.039
0.027
0.018
1.5
1.2
0.75
0.56
0.27
P29
1825
0.11
0.094
0.078
0.054
0.036
3.0
2.4
1.5
1.1
0.54
P39
1825
0.16
0.14
0.11
0.081
0.054
4.5
3.6
2.2
1.6
0.81
P49
1825
0.22
0.18
0.15
0.10
0.07
6.0
4.8
3.0
2.2
1.0
P08
2225
0.068
0.056
0.047
0.033
0.027
2.7
2.2
1.5
1.2
0.39
P28
2225
0.13
0.11
0.094
0.066
0.054
5.4
4.4
3.0
2.4
0.78
P38
2225
0.20
0.16
0.14
0.10
0.081
8.1
6.6
4.5
3.6
1.1
P48
2225
0.27
0.22
0.18
0.13
0.10
10
8.8
6.0
4.8
1.5
www.johanson dielectrics.com
MINI SWITCH-MODE CAPACITORS
®
CASE SIZE
DIMENSIONS
APPLICABLE
TO ALL SIZES:
IN.
L
W
L
W
MM
H ± .010
.070 1.78
C TYP.
.100 2.54
P ± .015
.065 1.65
W
h
h
h
h
c
p
L
T
T
T
T
L
W
c
p
P08
P09
P28
c
p
P29
P38
c
p
P39
P48
P49
DIMENSIONS
APPLICABLE
TO SPECIFIC SIZES:
IN.
MM
IN.
MM
IN.
MM
IN.
MM
IN.
MM
IN.
MM
IN.
MM
IN.
MM
L MAX
.280
7.11
0.24
6.1
0.28
7.11
0.24
6.1
0.28
7.11
0.24
6.1
0.28
7.11
0.24
6.1
W MAX
.270
6.86
0.27
6.86
0.27
6.86
0.27
6.86
0.27
6.86
0.27
6.86
0.27
6.86
0.27
6.86
T MAX
.095
2.41 0.095 2.41
0.19
4.83
0.19
4.83 0.285 7.24 0.285 7.24
0.38
9.65
0.38
9.65
Note: J-Lead and L-Lead options are available on all sizes above
ELECTRICAL CHARACTERISTICS
DIELECTRIC:
NP0
TEMPERATURE COEFFICIENT:
0 ±30ppm/°C (-55 to +125°C)
±15% (-55 to +125°C)
0.1% max.
2.5% max.
None
-2.5% per decade hour
1000 ΩF or 100 GΩ, whichever is less
500 ΩF or 50 GΩ, whichever is less
DISSIPATION FACTOR:
AGING:
INSULATION RESISTANCE (MIN. @ 25°C, WVDC)
X7R
For 500V Ratings: 750VDC, 25ºC, 50mA max
For 200V Ratings: 2xWVDC, 25ºC, 50mA max
For 25-100V Ratings: 2.5xWVDC, 25ºC, 50mA max
DIELECTRIC STRENGTH:
1kHz ±50Hz;1.0±0.2 VRMS
TEST CONDITIONS:
See page 39 for additional dielectric specifications.
OTHER:
HOW TO ORDER - MINI SWITCHMODE®
Part number written: 500P28W395KJ4U
500
P28
W
395
K
J
4
U
VOLTAGE
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
PACKING
See Chart
N = NP0
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros.
103 = 0.01 μF
105 = 1.0 μF
106 = 10 uF
J = ±5%
K = ±10%
M = ±20%
Z = +80% -20%
J = “J” Leads
(formed in)
L = “L” Leads
(formed out)
3 = Standard
4 = Unmarked
U = Tape and Reel
16mm, 13” Reel
NONE = Bulk pack
H = High Reliability
testing per customer
requirements
S = Special Part
250
500
101
201
501
=
=
=
=
=
25 V
50 V
100 V
200 V
500 V
www.johanson dielectrics.com
25
BME MINI SWITCH-MODE CAPACITORS
®
This new series of miniature switchmode power supply filter
capacitors uses BME (Base Metal Electrode) construction to
achieve 300-400% capacitance increases and component size
reductions compared to their PME (Precious Metal Electrode)
counterparts per the comparison examples below.
BME Size / Capacitance Comparison
Technology
Chips
Volts
Max. Cap.
PME
1x 1825
50V
1.2µF
BME
1x 1812
50V
4.7µF
PME
2x 2225
100V
4.4µF
BME
2x 2220
100V
10µF
FEATURES
APPLICATIONS
• High Capacitance, Small SIze
• DC-DC Converters
• Low ESR/ESL
• Power Supply Input & Output Filters
• Leadframe reduces thermal & mechanical stress
due to board flexure and TCE mismatch
• High Capacitance Applications Where Increased
Reliability is Required
• Green / ROHS Compliant
CAPACITANCE / VOLTAGE
CASE SIZE / PART NUMBER
CAPACITANCE
RATING
DC VOLTAGE
RATING
SIZE P0A
1812 SINGLE STACK
2.2 µF
100V
101P0AW225MJ4U+RC
500P0AW475MJ4U+RC
SIZE P07
2220 SINGLE STACK
SIZE P2A
1812 DOUBLE STACK
4.7 µF
50V
4.7 µF
100V
101P07W475MJ4U+RC
101P2AW475MJ4U+RC
10 µF
50V
500P07W106MJ4U+RC
500P2AW106MJ4U+RC
10 µF
100V
H
101P27W106MJ4U+RC
22 µF
50V
h1
500P27W226MJ4U+RC
Dimensions
Applicable
to specific sizes:
L MAX:
W MAX:
H MAX:
H1 TYP.
C TYP.
P1 TYP.
P2 ± 0.02
IN.
MM
.059
.100
.020
.065
1.50
2.54
0.50
1.65
W
IN.
MM
IN.
MM
IN.
p1
MM
0.217
0.157
0.118
5.5
4.0
3.0
0.256
0.217
0.118
6.5
5.5
3.0
0.217
0.157
0.236
5.5
4.0
6.0
Dimensions Applicable
to all sizes:
IN.
L
p2
L
p2
0.256
0.217
0.236
c
W
W
H
H
h1
h1
p1
L
p2
c
W
26
SIZE P27
2220 DOUBLE STACK
www.johanson dielectrics.com
H
h1
p1
c
MM
6.5
5.5
6.0
BME MINI SWITCH-MODE CAPACITORS
®
TYPICAL APPLICATION: DC-DC CONVERTER INPUT & OUTPUT FILTERING
Input Filter
Capacitor
Output Filter
Capacitor
Controller
ELECTRICAL CHARACTERISTICS
OPERATING RANGE:
-55 to +125°C
TEMPERATURE COEFFICIENT:
X7R, ±15%
DISSIPATION FACTOR:
0.020 (2.0%) max.
AGING RATE:
<2.5% per decade
INSULATION RESISTANCE:
25°C IR >100GΩ or 1000 ΩF
whichever is less
WITHSTANDING VOLTAGE:
2.5 X WVDC for 50 VDC
2.0 X WVDC for 100 VDC
TEST CONDITIONS:
1kHz ±50Hz; 1.0±0.2 VRMS, 25°C
HOW TO ORDER - BME MINI SWITCH-MODE®
Part number written: 500P07W106MJ4U+RC
500
P07
W
106
M
J
4
U
+RC
VOLTAGE
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
PACKING
ROHS CODE
500 = 50 V
101 = 100 V
See Chart
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros.
225 = 2.2 μF
106 = 10 uF
M = ±20%
J = “J” Leads
(formed in)
4 = Unmarked
U = Embossed
Tape 13” Reel per
EIA RS481
+RC = RoHS
Compliant
www.johanson dielectrics.com
27
SWITCH-MODE RADIAL LEADED CAPACITORS
KEY FEATURES
• Rated Working Voltages from 25 to 500 VDC
• Rugged Epoxy Coating Offers Increased Protection
• Hi-Rel Screened Versions Available
• Custom Sizes, Voltages, and Values Available
ADVANTAGES
CASE SIZE
H03
H04
H05
H06
28
• Power Supplies
• Surge Protection
• Voltage Multipliers
• Industrial Control Circuits
• Data Isolation
• Custom Applications
RATED
VOLTAGE
IN.
(MM)
W
H
T
S
LD
.300 max.
.300 max.
.200 max.
.200 nom.
.020 nom.
(7.62 max.)
(7.62 max.)
(5.08 max.)
(5.08 nom.)
(.510 nom.)
W
H
T
S
LD
.400 max.
.400 max.
.200 max.
.200 nom.
.020 nom.
(10.2 max.)
(10.2 max.)
(5.08 max.)
(5.08 nom.)
(.510 nom.)
W
H
T
S
LD
.500 max.
.500 max.
.200 max.
.400 nom.
.025 nom.
(12.7 max.)
(12.7 max.)
(5.08 max.)
(10.2 nom.)
(.635 nom.)
W
H
T
S
LD
.870 max.
.600 max.
.200 max.
.790 nom.
.032 nom.
(22.1 max.)
(15.2 max.)
(5.08 max.)
(20.1 nom.)
(.813 nom.)
NP0 CAPACITANCE (MAX.)
X7R CAPACITANCE (MAX.)
VALUE
CODE
VALUE
CODE
25 VDC
.070 µF
703
2.00 µF
205
50 VDC
.060 µF
603
1.60 µF
165
100 VDC
.050 µF
503
1.10 µF
115
200 VDC
.040 µF
403
.730 µF
734
500 VDC
.020 µF
203
.250 µF
254
25 VDC
.120 µF
124
5.10 µF
515
50 VDC
.100 µF
104
4.10 µF
415
100 VDC
.082 µF
823
2.70 µF
275
200 VDC
.050 µF
503
1.80 µF
185
500 VDC
.030 µF
303
.670 µF
674
25 VDC
.240 µF
244
8.70 µF
875
50 VDC
.200 µF
204
7.20 µF
725
100 VDC
.180 µF
184
4.80 µF
485
200 VDC
.110 µF
114
3.30 µF
335
500 VDC
.070 µF
703
1.10 µF
115
25 VDC
.750 µF
754
22.0 µF
226
50 VDC
.620 µF
624
17.0 µF
176
100 VDC
.560 µF
564
13.0 µF
136
200 VDC
.360 µF
364
8.00 µF
805
500 VDC
.240 µF
244
2.90 µF
295
www.johanson dielectrics.com
SWITCH-MODE RADIAL LEADED CAPACITORS
CASE SIZE
IN.
H07
H08
H09
H10
W
RATED
VOLTAGE
(MM)
W
H
T
S
LD
1.10 max.
.600 max.
.200 max.
.980 nom.
.032 nom.
(27.9 max.)
(15.2 max.)
(5.08 max.)
(24.9 nom.)
(.813 nom.)
W
H
T
S
LD
1.10 max.
.600 max.
.350 max.
.980 nom.
.032 nom.
(27.9 max.)
(15.2 max.)
(8.89 max.)
(24.9 nom.)
(.813 nom.)
W
H
T
S
LD
.670 max.
.540 max.
.200 max.
.575 nom.
.025 nom.
(17 max.)
(13.7 max.)
(5.08 max.)
(14.6 nom.)
(.635 nom.)
W
H
T
S
LD
.930 max.
.720 max.
.250 max.
.800 nom.
.032 nom.
(23.6 max.)
(18.3 max.)
(6.35 max.)
(20.3 nom.)
(.813 nom.)
NP0 CAPACITANCE (MAX.)
VALUE
CODE
VALUE
CODE
25 VDC
.680 µF
684
35.0 µF
356
50 VDC
.560 µF
564
28.0 µF
286
100 VDC
.470 µF
474
19.0 µF
196
200 VDC
.330 µF
334
13.0 µF
136
500 VDC
.200 µF
204
4.60 µF
465
25 VDC
1.20 µF
125
70.0 µF
706
50 VDC
1.10 µF
115
56.0 µF
566
100 VDC
.820 µF
824
37.0 µF
376
200 VDC
.470 µF
474
26.0 µF
266
500 VDC
.300 µF
304
8.70 µF
875
25 VDC
.450 µF
454
13.0 µF
136
50 VDC
.360 µF
364
10.0 µF
106
100 VDC
.330 µF
334
7.20 µF
725
200 VDC
.240 µF
244
5.00 µF
505
500 VDC
.180 µF
184
1.70 µF
175
25 VDC
1.00 µF
105
38.0 µF
386
50 VDC
.900 µF
904
30.0 µF
306
100 VDC
.750 µF
754
20.0 µF
206
200 VDC
.470 µF
474
14.0 µF
146
500 VDC
.300 µF
304
5.80 µF
585
T
NOTE: Lead lengths are typically 1.25” for orders in bulk packaging. Leads are typically
1.00” for tape and reel packaging. Tape and reel packaging comes in 1000 piece reels.
H
Meniscus
Height
.050" Max
S
HOW TO ORDER SWITCH-MODE RADIALS
201
VOLTAGE
250
500
101
201
501
=
=
=
=
=
X7R CAPACITANCE (MAX.)
25 V
50 V
100 V
200 V
500 V
Part number written: 201H07W105KQ4
H07
W
105
K
Q
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
PACKING
Q = Leaded &
Encapsulated
4 = Standard
3 = Specified
T = Tape and Reel
H = High Rel Testing
per customer
requirements
S = Special Part
See Chart
N = NP0
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros.
101 = 100 pF
102 = 1000 pF
103 = 0.01 µF
105 = 1.00 µF
J
K
M
Z
=
=
=
=
± 5%
± 10%
± 20%
+80% -20%
www.johanson dielectrics.com
4
T
29
HIGH VOLTAGE RADIAL LEADED CAPACITORS
KEY FEATURES
• Rated Working Voltages from 500 to 5000 VDC
• Rugged Epoxy Coating Offers Increased Protection
• Compact MLC Designs Smaller Than Film or Disc
• NEW 200°C Versions Available for Oil &
Geophysical Tool, Aircraft Engine Control Applications
• DSCC Drawing & Other Screened Versions Available
ADVANTAGES
CASE SIZE
IN.
H42
H47
H51
H62
H66
30
• Power Supplies
• Surge Protection
• Voltage Multipliers
• Industrial Control Circuits
• Data Isolation
• Custom Applications
RATED
VOLTAGE
(MM)
W
H
T
S
LD
0.250 Max
0.220 Max
0.270 Max
0.170 ±0.03
0.025 ±.002
(6.35 Max)
(5.59 Max)
(6.86 Max)
(4.32 ±0.76)
(0.64 ±0.05)
W
H
T
S
LD
0.370 Max
0.300 Max
0.270 Max
0.275 ±0.03
0.025 ±.002
(9.40 Max)
(7.62 Max)
(6.86 Max)
(6.99 ±0.76)
(0.64 ±0.05)
W
H
T
S
LD
0.470 Max
0.400 Max
0.320 Max
0.375 ±0.03
0.025 ±.002
(12.0 Max)
(10.2 Max)
(8.13 Max)
(9.53 ±0.76)
(0.64 ±0.05)
W
H
T
S
LD
0.570 Max
0.500 Max
0.320 Max
0.475 ±0.03
0.025 ±.002
(14.5 Max)
(12.7 Max)
(8.13 Max)
(12.1 ±0.76)
(0.64 ±0.05)
W
H
T
S
LD
0.670 Max
0.600 Max
0.320 Max
0.575 ±0.03
0.025 ±.002
(17.0 Max)
(15.2 Max)
(8.13 Max)
(14.6 ±0.76)
(0.64 ±0.05)
500 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
500 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
500 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
500 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
500 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
NP0 CAPACITANCE (MAX.)
X7R CAPACITANCE (MAX.)
VALUE
CODE
VALUE
CODE
4700 pF
1500 pF
680 pF
330 pF
150 pF
100 pF
.022 µF
3300 pF
1500 pF
680 pF
330 pF
220 pF
.056 µF
4700 pF
3300 pF
1500 pF
1000 pF
470 pF
.100 µF
.010 µF
6800 pF
3300 pF
2200 pF
1000 pF
.150 µF
.015 µF
.010 µF
4700 pF
3300 pF
2200 pF
472
152
681
331
151
101
223
332
152
681
331
221
563
472
332
152
102
471
104
103
682
332
222
102
154
153
103
472
332
222
.150 µF
.055 µF
9000 pF
2800 pF
630 pF
550 pF
.480 µF
.170 µF
.025 µF
.011 µF
1800 pF
940 pF
1.20 µF
.450 µF
.094 µF
.043 µF
.010 µF
4900 pF
2.20 µF
.804 µF
.240 µF
.073 µF
.028 µF
.013 µF
3.30 µF
1.20 µF
.440 µF
0.130 µF
.041 µF
.020 µF
154
553
902
282
631
531
484
174
253
113
182
941
125
454
943
433
103
492
225
804
244
733
283
133
335
125
444
134
413
203
www.johanson dielectrics.com
HIGH VOLTAGE RADIAL LEADED CAPACITORS
CASE SIZE
IN.
H70
H72
H80
NP0 CAPACITANCE (MAX.)
RATED
VOLTAGE
(MM)
W
H
T
S
LD
0.770 Max
0.720 Max
0.320 Max
0.675 ±0.03
0.025 ±.002
(19.6 Max)
(18.3 Max)
(8.13 Max)
(17.1 ±0.76)
(0.64 ±0.05)
W
H
T
S
LD
0.870 Max
0.750 Max
0.320 Max
0.775 ±0.03
0.025 ±.002
(22.1 Max)
(19.1 Max)
(8.13 Max)
(19.7 ±0.76)
(0.64 ±0.05)
W
H
T
S
LD
1.450 Max
0.720 Max
0.320 Max
1.375 ±0.03
0.025 ±.002
(36.8 Max)
(18.3 Max)
(8.13 Max)
(34.9 ±0.76)
(.064 ±0.05)
500 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
500 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
500 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
X7R CAPACITANCE (MAX.)
VALUE
CODE
VALUE
CODE
.220 µF
.022 µF
.015 µF
6800 pF
4700 pF
3300 pF
.330 µF
.100 µF
.056 µF
.033 µF
.010 µF
6800 pF
.470 µF
.150 µF
.082 µF
.047 µF
.015 µF
.010 µF
224
223
153
682
472
332
334
104
563
333
103
682
474
154
823
473
153
103
5.70 µF
2.10 µF
.620 µF
.190 µF
.054 µF
.026 µF
7.30 µF
2.80 µF
.800 µF
.250 µF
.080 µF
.041 µF
12.0 µF
4.60 µF
1.20 µF
.390 µF
.130 µF
.068 µF
575
215
624
194
543
263
735
285
804
254
803
413
126
465
125
394
134
683
T-SERIES 200°C
Johanson also offers two different series of high temperature radial leaded
capacitors for 200°C. These components feature rugged premolded cases
with Hi-Temp epoxy fill. The 200°C line is offered in voltage ratings of 25V to
4KV and maximum capacitance loss of -0.5% in NP0 and -45% in X7R. The
line is offered in voltage ratings of 50V & 100V with maximum capacitance
loss of -1.5% in NP0 and -55% in X7R. Please visit our website for complete
component selection & specifications
W
H
S
APPLICATIONS
• Geophysical Probes
• Jet Engine Controls
HOW TO ORDER HIGH VOLTAGE RADIALS
VOLTAGE
501
102
202
302
402
502
=
=
=
=
=
=
500 V
1000 V
2000 V
3000 V
4000 V
5000 V
Meniscus
Height
.050" Max
NOTE: Lead lengths are
typically 1.25” for orders in
bulk packaging. Leads are
typically 1.00” for tape and
reel packaging. Tape and
reel packaging comes in
1000 piece reels.
• Oil Well Logging (Downhole)
102
T
Part number written: 102H42W101KQ4
H42
W
101
K
Q
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
PACKING
See Chart
N = NP0
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros.
102 = 1000 pF
103 = 0.01 µF
105 = 1.00 µF
J = ± 5%
K = ± 10%
M = ± 20%
Z = +80% -20%
Q = Leaded &
Encapsulated
4 = Standard
3 = Specified
T = Tape and Reel
H = High Rel Testing
per customer
requirements
S = Special Part
www.johanson dielectrics.com
4
T
31
Resistor Wirewound Precision
RWP Series
KEY FEATURES
• Temperature Coefficients of ± 2ppm/ºC
• Temperature Range -55°C to +145°C
• Resistance to 6 Mega-Ohms
• Resistance Tolerance starting at ± 0.005%
• Long Term Stability / 100ppm/year
• High TCR Available - Platinum & Balco Wire
• Matched Resistance Sets to ± 0.001 and ± 0.5 ppm/ºC
• 100% Acceptance Tested
• Options available: Wide TCR Range, High Stability and Fast
Rise Time
APPLICATIONS
• Smart Grid Metering
• Power Inverters
• Engine Sensors
• Temperature Sensors
PRODUCT SUMMARY
PRODUCT SERIES RESISTANCE POWER RATING
(RWP)
(Ω)
(W)
Radial
Up to 1M
0.125 to 0.500
± 0.005% to 1%
Axial
Up to 6M
TEMPERATURE
COEFFICIENT
TOLERANCE 1
0.06 to 2.00

>100 Ω : ± 10ppm/°C

10 Ω to100 Ω : ± 20ppm/°C

<10 Ω : ± 30ppm/°C
AVAILABLE OPTIONS (Consult Factory)
•
•
Power Derating Curve
Wide TCR Range: Low and High TC
configurations from -20ppm/ºC to +6000ppm/ºC.
Down to 1ppm/ºC available.
180
160
High Stability: High stability version with maximum
resistance change of ± 20ppm/year under normal
conditions.
Fast Rise Time: Low reactance design for fast rise
time and extended frequency response.
•
Special Testing Requirements
•
Special Pulse Requirements
- 55ºC to + 145ºC
See Power Derating Curve
1
Rated Power ( % )
•
TEMPERATURE
RANGE 1
1% / 0
.5% /
140
0.05%
120
100
/ 0.02%
0.1%
Toleran
ce
Tolera
n
ce
0.01% To
lerance
80
60
0.005% Toleran
ce
40
20
0
0
20
40
60
80
100
120
140
160
Ambient Temperature (°C)
HOW TO ORDER
RWP
A01
W
038K0
F
S
RESISTOR WIREWOUND
PRECISION
PACKAGE CODE,
WATTS, VOLTAGE
TEMPERATURE COEFFICIENT
OF RESISTANCE (TCR)
RESISTANCE
TOLERANCE
PACKING
Radial
B01, 0.125W, 150Vmax
B02, 0.250W, 150Vmax
Axial
A01, 0.06W, 75Vmax
A02, 0.08W, 100Vmax
See Table
W = ± 10ppm/ºC
U = ± 20ppm/ºC
S = ± 30ppm/ºC
Z = special
0R038 = 0.038Ω
003K8 = 3.8KΩ
038K0 = 38.0KΩ
380K0 = 380.0KΩ
003M8 = 3.8MΩ
Letter denotes decimal place.
R = decimal., “K” 103, “M” 106
Remaining 4 digits are
significant or placeholders
V = ± 0.005%
T = ± 0.01%
Q = ± 0.02%
A = ± 0.05%
B = ± 0.1%
F = ± 1.0%
* For Tin/Lead coated leads, add “-Pb” to part number
Example P/N: RWPA01W038K0FS is Resistor Wirewound Precision 0.06W, 75V, ±10ppm/°C 38.0KΩ, ±1.0%, bulk
32
www.johanson dielectrics.com
S = Bulk
T = Tape & Reel
Resistor Wirewound Precision
RWP Series
RADIAL
Package Code
B01
B02
B03
Max Resistance (Ω)
500k
750k
500k
1M
Max Working Voltage (V)
150
150
150
150
0.125
0.250
0.300
0.500
0.140
[3.56]
0.150
[3.81]
0.102
[2.59]
0.160
[4.06]
0.250
[6.35]
0.270
[6.86]
0.320
[8.13]
0.525
[13.34]
0.270
[6.86]
0.540
[13.72]
0.300
[7.62]
0.585
[14.86]
0.032
[0.81]
0.032
[0.81]
0.025
[0.64]
0.032
[0.81]
0.125
[3.18]
0.250
[6.35]
0.150
[3.81]
0.400
[10.16]
Power Rating (W)
Width
±0.010”
[±0.25mm]
Height
±0.025”
[±0.64mm]
Dimensions
Inches [mm]
Length
±0.010”
[±0.25mm]
Lead Diameter 1
±0.002”
[±0.05mm]
Lead Spacing
±0.015”
[±0.4mm]
Radial Dimensions
B04
1 Lead Length 1.00” [25.40mm] Min
Axial Dimensions
* Moisture Sensitivity Level: MSL-1
AXIAL
2 Lead Length 1.50” [38.10mm] Min
Package Code
A01
A02
A03
A04
A05
A06
A07
A08
A09
A10
Max Resistance (Ω)
75k
150k
150k
250k
250k
400k
500k
500k
750k
750k
1M
1M
Max Working Voltage (V)
75
100
100
100
100
150
150
100
200
200
200
200
0.06
0.08
0.08
0.10
0.10
0.12
0.15
0.15
0.175
0.20
0.20
0.20
0.210
[5.33]
0.260
[6.60]
0.260
[6.60]
0.375
[9.53]
0.312
[7.92]
0.250
[6.35]
0.295
[7.49]
0.250
[6.35]
0.375
[9.53]
0.450
[11.43]
0.375
[9.53]
0.375
[9.53]
0.100
[2.54]
0.125
[3.18]
0.125
[3.18]
0.125
[3.18]
0.156
[3.96]
0.187
[4.75]
0.187
[4.75]
0.250
[6.35]
0.187
[4.75]
0.187
[4.75]
0.250
[6.35]
0.250
[6.35]
0.020
[0.51]
0.020
[0.51]
0.025
[0.64]
0.020
[0.51]
0.020
[0.51]
0.025
[0.64]
0.025
[0.64]
0.025
[0.64]
0.025
[0.64]
0.025
[0.64]
0.032
[0.81]
0.025
[0.64]
A13
A14
A15
A16
A17
A18
A19
Max Resistance (Ω)
1M
1.2M
1.2M
2.5M
2.5M
3.8M
3.8M
6M
6M
6M
6M
Max Working Voltage (V)
250
300
300
400
400
300
400
600
800
900
1000
Power Rating (W)
0.25
0.25
0.25
0.33
0.33
0.40
0.50
0.75
1.00
1.50
2.00
0.465
[11.81]
0.500
[12.70]
0.500
[12.70]
0.750
[19.05]
0.750
[19.05]
0.500
[12.70]
0.750
[19.05]
1.000
[25.40]
1.000
[25.40]
1.500
[38.10]
2.000
[50.80]
0.210
[5.33]
0.250
[6.35]
0.250
[6.35]
0.250
[6.35]
0.250
[6.35]
0.375
[9.53]
0.375
[9.53]
0.375
[9.53]
0.500
[12.70]
0.500
[12.70]
0.500
[12.70]
0.025
[0.64]
0.032
[0.81]
0.025
[0.64]
0.032
[0.81]
0.025
[0.64]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
Power Rating (W)
Length
±0.025”
[±0.64mm]
Dimensions
Inches [mm]
Diameter
±0.005”
[±0.13mm]
Lead
Diameter 2
±0.002”
[±0.05mm]
Package Code
Length
±0.025”
[±0.64mm]
Dimensions
Inches [mm]
Diameter
±0.005”
[±0.13mm]
Lead
Diameter 2
±0.002”
[±0.05mm]
A20
A21
A11
A22
A12
A23
* Moisture Sensitivity Level: MSL-1
This datasheet is subject to change without notice.
www.johanson dielectrics.com
33
Resistor Wirewound Precision SMT
RWF Series
KEY FEATURES
• Resistance from 0.005 to 50kOhms
• Precision, Flame Proof and Pulse Withstanding
• Tolerance to ± 0.01%
• High Power to 4 Watts
• Flame Resistant UL 94V-0
• Superior Surge Handling Capability
• High Temperature Rating up to 275º
• Low Temperature Coefficient to ± 20ppm/ºO
• Non-Inductive Windings available
APPLICATIONS
• Motor Control
• Braking Systems
• Power Supplies
• Pressure Transducers
PRODUCT SUMMARY
RESISTANCE
RANGE (Ω) 1
POWER
RATING (W) DIELECTRIC
@ 70 ºC
STRENGTH TOLERANCE
C1
0.01 to 400
0.5
C2
0.005 to 3k
1
C3
0.01 to 15k
2
C4
0.01 to 25k
3
C5
0.01 to 50k
4
D1
0.005 to 0.05
1
D2
0.005 to 0.07
2
1000 VAC
500 VAC
± 0.01%
to
± 5%
TEMPERATURE
COEFFICIENT
 1 Ω to 10 Ω : ± 50ppmºC
± 0.1%
to
± 5%
Special Pulse Requirements
Power Derating Curve
120
AVAILABLE OPTIONS (Consult Factory)
•
>1000 MOhms
/ Dry
± 200ppm/°C
Call Factory For Lower
Maximum Working Voltage =
Special Testing Requirements
- 55°C
to
+ 275°C
 <1 Ω : Call Factory
For non-inductive windings, divide max resistance by 2
•
TEMPERATURE INSULATION
RANGE
RESISTANCE
 >10 Ω : ± 20ppm/°C
Rated Power (%)
1
PRODUCT
SERIES
(RWF)
100
80
60
40
20
0
0
HOW TO ORDER
50
100
150
200
250
300
350
Ambient Temperature (ºC)
RWF
N
C4
U
380R0
B
E
RESISTOR
WIREWOUND SMT
WINDINGS
PACKAGE CODE,
WATTS, RESISTANCE
TEMPERATURE COEFFICIENT
OF RESISTANCE (TCR)
RESISTANCE
TOLERANCE
PACKING
S = Standard
N = NonInductive
C1, 0.5W, [0.01 to 400]Ω
C2, 1.0W, [0.005 to 3k]Ω
C3, 2.0W, [0.01 to 15k]Ω
C4, 3.0W, [0.01 to 25k] Ω
C5, 4.0W, [0.01 to 50k]Ω
0R038 = 0.038Ω
003K8 = 3.8KΩ
038K0 = 38.0KΩ
380K0 = 380.0KΩ
003M8 = 3.8M Ω
Letter denotes decimal place.
R = decimal., “K” 103, “M” 106
Remaining 4 digits are
significant placeholders
T = ± 0.01%
Q = ± 0.02%
A = ± 0.05%
B = ± 0.1%
F = ± 1.0%
J = ± 5.0%
E = Embossed
Tape & Reel
D1, 1.0W, [0.005 to 0.05]Ω
U = ± 20ppm/ºC
Q= ± 50PPM/ºC
L = ± 200ppm/ºC
Z = special
D2, 2.0W, [0.005 to 0.07]Ω
* For Tin/Lead coated leads,
add “- Pb” to part number
Example P/N: RWFNC4U380R0BE is Resistor Wirewound Precision SMT Non-Inductive, 3.0W, ±20ppm/°C, 380Ω, ±0.1%, embossed tape & reel
34
www.johanson dielectrics.com
Resistor Wirewound Precision SMT
RWF Series
MECHANICAL CHARACTERISTICS
Lead Thickness 0.006 [.015mm] Tolerances ±0.002” [±0.05mm]
Package Code
C1
C2
C3
C4
C5
D1
D2
A (Tolerances)
0.190 [4.83]
0.260 [6.60]
0.450 [11.43]
0.625 [15.83]
0.820 [20.83]
0.260 [6.60]
0.450 [11.43]
B (Tolerances)
0.130[ 3.30]
0.155 [3.94]
0.250 [6.35]
0.270[6.86]
0.295 [7.49]
0.155 [3.94]
0.250 [6.35]
C (Tolerances)
0.110 [2.79]
0.125 [3.18]
0.180 [4.57]
0.250 [6.35]
0.305 [7.75]
0.100 [2.54]
0.100 [2.54]
D (Tolerances)
0.060 [1.52]
0.070[1.78]
0.120 [3.05]
0.120 [3.05]
0.150 [3.81]
0.070 [1.79]
0.120 [3.05]
F (Tolerances)
0.040 [1.02]
0.070 [1.78]
0.100 [2.54]
0.135 [3.43]
0.190 [4.83]
0.070 [1.79]
0.100 [2.54]
0.100 [2.54]
0.120 [3.05]
0.190 [4.83]
0.150 [3.81]
0.245 [6.22]
0.120 [3.05]
0.190 [4.83]
Height (Tolerances)
0.005 [0.13]
0.005 [0.13]
0.005 [0.13]
0.005 [0.13]
0.005 [0.13]
0.005 [0.13]
0.005 [0.13]
Width (Tolerances)
0.062 [1.57]
0.096 [2.44]
0.150 [3.81]
0.200 [5.08]
0.220 [5.59]
0.096 [2.44]
0.150 [3.81]
Height (Tolerances)
0.100 [2.54]
0.150 [3.81]
0.200 [5.08]
0.220 [5.59]
0.250 [6.35]
0.150 [3.81]
0.200 [5.08]
Length (Tolerances)
0.250 [6.35]
0.337 [8.56]
0.540 [13.72]
0.700 [17.78]
0.900 [22.86]
0.337 [8.56]
0.540 [13.72]
±0.015” [±0.4mm]
±0.015” [±0.4mm]
Dimensions
Inches [mm]
±0.015” [±0.4mm]
±0.015” [±0.4mm]
±0.015” [±0.4mm]
E (Tolerances)
Stand-Off
Inches [mm]
±0.015” [±0.4mm]
±0.005”[±0.13mm]
±0.015” [±0.4mm]
Solder Pad
Inches [mm]
±0.015” [±0.4mm]
±0.015” [±0.4mm]
ENVIRONMENTAL PERFORMANCE
DR Maximum
Environmental Performance (MIL-STD 202)
Load Life
±1% + 0.05 Ω
Moisture Resistance
Dielectric
±0.5% + 0.05 Ω
Storage
Shock
Thermal Shock
±0.5% + 0.05 Ω
5X Overload (5s)
Resistance to Heat Solder (260C, 10s)
PACKAGING INFORMATION
Package Code
C1
C2
C3
C4
C5
D1
D2
Reel/Tape Width [mm]
12
16
24
24
32
16
24
Small
650
600
250
125
180
600
250
Large
3000
2000
1000
500
500
2000
1000
Humidity Packaging Notes:
Moisture Barrier Bags (MBB) are used to package surface mount components. These bags include a dessicant and a Humidity
Indicator Card to monitor humidity levels. All bags are marked with Moisture-Sensitive Identification Labels.
A Moisture Sensitivity Level (MSL) rating of 2 (1-year floor life) applies to the Johanson RWF Series.
This datasheet is subject to change without notice.
www.johanson dielectrics.com
35
Resistor Wirewound High Power Rating
RWH Series
KEY FEATURES
• Excellent Pulse Handling
• Resistance Tolerances to ± 0.01%
• Resistance from 0.02 to 260kOhms
• MIL-R-26 / MIL-R-39007 Power Ratings
• Low TCR: ± 20ppm/ ºC Standard
• Non-Inductive Windings available
APPLICATIONS
• HDVC Systems
• Braking Systems
• Power Supplies
• Fluid Heater
PRODUCT SUMMARY
PRODUCT SERIES
(RWH)
POWER RATING
(W)
Miniature Axial
DIELECTRIC
STRENGTH
1 to 15
0.1 to 15
TEMPERATURE
COEFFICIENT
TEMPERATURE
RANGE
500 VAC:
E01, E02, E03,
E04, E05, E06
1000 VAC:
All Others
Axial
TOLERANCE
500 VAC:
F01, F02, F03,
F04, F05, F06, F07
-55°C to + 250°C
± 0.01%
to
± 10%
(1% Standard)
 >10 Ω : ± 20ppm/°C
 1 Ω to 10 Ω : ± 50ppm/°C
 <1 Ω : Call Factory
Characteristic U:
-55°C to + 275°C
Characteristic V:
-55°C to + 350°C
1000 VAC:
All Others
HOW TO ORDER
RWH
S
E02
T
U
003K8
F
S
RESISTOR
WIREWOUND
HIGH POWER
WINDINGS
PACKAGE CODE,
WATTS, RESISTANCE
OPERATING
TEMPERATURE
TEMPERATURE
COEFFICIENT OF
RESISTANCE (TCR)
RESISTANCE
TOLERANCE
PACKING
S = Standard
N = NonInductive
Miniature Axial
E01, 1.0W, 33Vmax
E02, 1.0W, 33Vmax
Axial
F01, 0.1W, 8.5Vmax
F02, 0.4W, 20Vmax
See Table
T = -55ºC to +250ºC
U = -55ºC to +275ºC
V = -55ºC to +350ºC
U = ± 20ppm/°C
Q = ± 50ppm/°C
Z = Special
0R038 = 0.038Ω
003K8 = 3.8KΩ
038K0 = 38.0KΩ
380K0 = 380.0KΩ
003M8 = 3.8MΩ
Letter denotes
decimal place.
R = decimal.,“K” 103,“M” 106
T= ± 0.01%
Q= ± 0.02%
A= ± 0.05%
B= ± 0.1%
F= ± 1.0%
J= ± 5.0%
K= ± 10.0%
S = Bulk
T = Tape &
Reel
Remaining 4 digits
are significant or
placeholders.
Example P/N: RWHSE02TU003K8FS is Resistor Wirewound High Power, Standard, 1.0W, 33V, -55ºC to +250ºC, ±20ppm/ºC, 3.8KΩ, ±1.0%, bulk
* For Tin/Lead coated leads, add "- Pb" to part number
36
www.johanson dielectrics.com
Resistor Wirewound High Power Rating
RWH Series
MINIATURE AXIAL
Package Code
Max Resistance (Ω)
E03
E04
E05
E06
E07
E08
E09
3.4k
7.5k
7.5k
10k
10k
12.5k
25k
32k
33
33
42
42
80
80
135
162
194
Power Rating (W)
1
1
1.5
1.5
2
2
3
4
5
A
0.250
[6.35]
0.250
[6.35]
0.312
[7.92]
0.312
[7.92]
0.406
[10.31]
0.406
[10.31]
0.350
[8.89]
0.560
[14.22]
0.500
[12.70]
B
0.085
[2.16]
0.085
[2.16]
0.078
[1.98]
0.078
[1.98]
0.094
[2.39]
0.094
[2.39]
0.156
[3.96]
0.187
[4.75]
0.218
[5.54]
C2
0.020
[0.51]
0.025
[0.64]
0.020
[0.51]
0.025
[0.64]
0.025
[0.64]
0.020
[0.51]
0.032
[0.81]
0.032
[0.81]
0.040
[1.02]
MIL-R-26 / MIL-R-39007
RW-81
RWR-81
RW-81
RWR-81
RWR-82
RWR-82
RW-80
RWR-80
RW-80
RWR-80
Package Code
E10
E11
E12
E13
Max Resistance (Ω) 1
50k
95k
150k
260k
Inches [mm]
±0.031”
[±0.79mm]
±0.002”
[±0.05mm]
Max Working Voltage
(V)
Power Rating (W)
A
±0.062”
[±1.57mm]
Dimensions
Inches [mm]
B
±0.031”
[±0.79mm]
C2
±0.002”
[±0.05mm]
MIL-R-26 / MIL-R-39007
Power Derating Curve
120
258
425
607
1050
6
7
10
15
0.625
[15.88]
0.875
[22.23]
1.220
[30.99]
1.780
[45.21]
0.250
[6.35]
0.312
[7.92]
0.312
[7.92]
0.375
[9.53]
0.040
[1.02]
0.040
[1.02]
0.040
[1.02]
0.040
[1.02]
Rated Power ( % )
Dimensions
2
E02
3.4k
±0.062”
[±1.57mm]
1
E01
Max Working Voltage (V)
1
100
80
60
40
20
0
0
-50
0
50
100
150
200
250
300
Ambient Temperature (°C)
RW-84
For non-inductive windings / divide maximum resistance by 2
Lead Diameter:
18 AWG = 0.040" / 20 AWG = 0.032” /22 AWG = 0.025" / 24 AWG = 0.020"
www.johanson dielectrics.com
37
Resistor Wirewound High Power Rating
RWH Series
AXIAL
Package Code
F01
F02
F03
F04
F05
F06
F07
F08
F09
F10
Max Resistance (Ω) 1
500
2.5k
2.5k
7.5k
7.5k
10k
10k
12.5k
22k
22k
Max Working Voltage (V)
8.5
20
20
29
29
52
52
60
130
140
Power
Rating (W)
Dimensions
Inches [mm]
U
0.1
0.4
0.4
0.75
0.75
1.0
1.0
1.5
2.5
3.0
V
0.25
0.5
0.5
0.9
0.9
1.5
1.5
2.0
3.0
3.75
A
±0.062”
[±1.57mm]
0.150
[3.81]
0.250
[6.35]
0.250
[6.35]
0.330
[8.38]
0.330
[8.38]
0.406
[10.31]
0.406
[10.31]
0.350
[8.89]
0.500
[12.70]
0.560
[14.22]
B
±0.031”
[±0.79mm]
0.078
[1.98]
0.094
[2.39]
0.094
[2.39]
0.094
[2.39]
0.094
[2.39]
0.094
[2.39]
0.094
[2.39]
0.156
[3.96]
0.187
[4.75]
0.187
[4.75]
C2
±0.002”
[±0.05mm]
0.018
[0.45]
0.020
[0.51]
0.025
[0.64]
0.020
[0.51]
0.025
[0.64]
0.020
[0.51]
0.025
[0.64]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
RW-70
RW-70
RW-69
RW-79
MIL-R-26 / MIL-R-39007
Package Code
F11
F12
F13
F14
F15
F16
F17
F18
F19
F20
Max Resistance (Ω) 1
40k
40k
30k
45k
45k
91k
65k
95k
150k
100k
Max Working Voltage (V)
Power
Rating (W)
Dimensions
Inches [mm]
140
140
140
210
210
360
390
504
650
590
U
3.0
3.0
3.0
4.0
4.0
5.0
5.0
5.0
7.0
7.0
V
4.0
4.0
3.5
5.5
5.5
6.5
6.5
6.5
9.0
9.0
A
±0.062”
[±1.57mm]
0.500
[12.70]
0.500
[12.70]
0.500
[12.70]
0.675
[17.15]
0.675
[17.15]
0.875
[22.23]
0.970
[24.64]
1.025
[26.04]
1.375
[34.93]
1.400
[35.56]
B
±0.031”
[±0.79mm]
0.250
[6.35]
0.250
[6.35]
0.200
[5.08]
0.270
[6.68]
0.270
[6.68]
0.312
[7.92]
0.250
[6.35]
0.312
[7.92]
0.375
[9.52]
0.312
[7.92]
C2
±0.002”
[±0.05mm]
0.040
[1.02]
0.032
[0.81]
0.032
[0.81]
0.040
[1.02]
0.032
[0.81]
0.040
[1.02]
0.032
[0.81]
0.040
[1.02]
0.040
[1.02]
0.032
[0.81]
MIL-R-26 / MIL-R-39007
RW-74
Package Code
F21
F22
F23
Max Resistance (Ω) 1
154k
260k
320k
Max Working Voltage (V)
Dimensions
Inches [mm]
For non-inductive windings / divide maximum resistance by 2
Lead Diameter:
18 AWG = 0.040" / 20 AWG = 0.032” / 22 AWG = 0.025" /
24 AWG = 0.020" / 25 AWG = 0.018"
620
850
1500
U
7.0
10
15
V
9.0
13
-
120
A
±0.062”
[±1.57mm]
1.200
[30.99]
1.780
[45.21]
1.810
[45.95]
100
B
±0.031”
[±0.79mm]
0.312
[7.92]
0.375
[9.52]
0.510
[12.95]
C2
±0.002”
[±0.05mm]
0.040
[1.02]
0.040
[1.02]
0.050
[1.27]
MIL-R-26 / MIL-R-39007
38
2
Power Derating Curve
Rated Power ( % )
Power
Rating (W)
1
80
CH
AR
60
CH
AR
40
V
U
20
0
0
RW-78
RW-67
50
100
150
200
250
300
Ambient Temperature (°C)
www.johanson dielectrics.com
350
400
Resistor Wirewound High Power Rating
RWH Series
ENVIRONMENTAL PERFORMANCE
DR
Environmental Performance
(MIL-STD 202)
Miniature Axial
Axial - Characteristic U
Axial - Characteristic V
Vibration
±0.1 % + 0.05 Ω
±0.1% + 0.05 Ω
±0.2% + 0.05 Ω
Load Life
To 1% Depending on
Resistance Value and Size
± 1% + 0.05 Ω
±3% + 0.05 Ω
Moisture Resistance
±0.2 % + 0.05 Ω
±0.2% + 0.05 Ω
±2% + 0.05 Ω
Dielectric
±0.2 % + 0.05 Ω
±0.2% + 0.05 Ω
±0.2% + 0.05 Ω
Storage
±0.2 % + 0.05 Ω
±0.2% + 0.05 Ω
±2% + 0.05 Ω
Shock
±0.1 % + 0.05 Ω
±0.1% + 0.05 Ω
±0.2% + 0.05 Ω
Thermal Shock
±0.2 % + 0.05 Ω
±0.2% + 0.05 Ω
±2% + 0.05 Ω
5X Overload (5s)
±0.2 % + 0.05 Ω
±0.2% + 0.05 Ω
±2% + 0.05 Ω
CONSTRUCTION NOTES:
 Centerless ground ceramic core
 Tinned copper or copperweld leads
 All welded terminations
 High Temperature / trivalent / inorganic silicone coating
PACKAGING INFORMATION
MINIATURE AXIAL: Bulk Only
AXIAL:
Package Code
F01
Bulk
10" Reel
12" Reel
Bulk
Only.
No T&R
14" Reel
F02
F03
F04
F05
F06
F07
F08
F09
F10
F11
F12
F13
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000 1000
1000
2000
2000
2000
2000
2000
2000
2000
500
500
500
500
500
3000
3000
3000
3000
3000
3000
3000
1500
1500
1000 1000
1000
5000
5000
5000
5000
5000
5000
5000
3000
3000
1500 1500
1500
Package Code
F14
F15
F16
F17
F18
F19
F20
F21
F22
Bulk
1000
1000
1000
1000
1000
1000
1000
1000
1000
10" Reel
N/A
N/A
N/A
500
N/A
N/A
N/A
N/A
N/A
12" Reel
500
500
500
1000
500
500
500
500
500
14" Reel
1000
1000
1000
1500
1000
750
750
750
750
* Moisture Sensitivity Level: MSL-1
AVAILABLE OPTIONS (Consult Factory)
•
Special Testing Requirements
•
Special Pulse Requirements
This datasheet is subject to change without notice.
www.johanson dielectrics.com
39
Resistor Wirewound Chasis Mount
RWC Series
KEY FEATURES
• Resistances from 0.005 to 250kOhms
• Tolerance to ± 0.01%
• High Temperature: -55ºC to +275ºC
• Low TCR: ± 20ppm/ ºC
• Power Rating 5 to 300 Watts
• Excellent Pulse Handling
• Non-Inductive windings available
• Four Terminal Versions Available (Call Factory)
APPLICATIONS
• Motor Control
• Braking Systems
• Welding
• X-Ray
PRODUCT SUMMARY
POWER RATING
(W @ 25ºC)
PRODUCT
SERIES
(RWC)
RESISTANCE
RANGE (Ω) 1
FREE
AIR
COMMERCIAL
MIL
DIELECTRIC
STRENGTH
G1
0.01 to 22K
4.5
7.5 a
5a
1500 VAC
G2
0.01 to 47K
7.5
12.5 a
10 a
1500 VAC
G3
0.01 to 90K
12
25 b
20 b
2500 VAC
G4
0.01 to 250K
20
50 c
30 c
3500 VAC
TOLERANCE: ± 0.01 to ± 10% (1% Standard)
AVAILABLE OPTIONS (Consult Factory)
TEMPERATURE
COEFFICIENT
TEMPERATURE
RANGE
 >10 Ω: ± 20ppm/ºC
 1 Ω to 10 Ω: ± 50ppm/ºC
- 55ºC to + 275ºC
 <1Ω: Call Factory
1
For non-inductive windings, divide maximum resistance by 2
a
Heatsink required: 0.040 [1.0] Aluminum Plate, 129 in2 [832 cm2] or equiv.
b
Heatsink required: 0.040 [1.0] Aluminum Plate, 167 in2 [1077 cm2] or equiv.
c
Heatsink required: 0.059 [1.5] Aluminum Plate, 291 in2 [1877 cm2] or equiv.
Heatsink required: 0.125 [3.2] Aluminum Plate, 294in2 [1896cm2] or equiv.
Heatsink required: 0.125 [3.2] Aluminum Plate, 895 in2 [5780 cm2] or equiv.
•
Special Testing Requirements
d
•
Special Pulse Requirements
e
HOW TO ORDER
RWC
N
G1
U
003K8
F
S
RESISTOR WIREWOUND CHASIS
MOUNT
WINDINGS
PACKAGE CODE,
WATTS (COMMERCIAL),
RESISTANCE
TEMPERATURE
COEFFICIENT OF
RESISTANCE (TCR)
RESISTANCE
TOLERANCE
PACKING
U = ± 20ppm/°C
Q = ± 50ppm/°C
Z = Special
038R0 = 38Ω
003K8 = 3.8KΩ
038K0 = 38.0KΩ
380K0 = 380.0KΩ
003M8 = 3.8MΩ
Letter denotes
decimal place.
R = decimal., “K” 103, “M” 106
Remaining 4 digits are
significant or placeholders.
S = Standard
N = Non-Inductive
G1, 7.5W, [0.01 to 22k]Ω
G2, 12.5W, [0.01 to 47k]Ω
G3, 25.0W, [0.01 to 90k]Ω
G4, 50.0W, [0.01 to 250k]Ω
T= ± 0.01%
Q= ± 0.02%
A= ± 0.05%
B= ± 0.1%
F= ± 1.0%
J= ± 5.0%
K= ± 10.0%
Example P/N: RWCNG1U003K8FS is Resistor Wirewound Chasis Mount, Non-Inductive, 7.5W, ±20ppm/ºC, 3.8KΩ, ±1.0%, bulk
* For Tin/Lead coated leads, add "- Pb" to part number.
40
www.johanson dielectrics.com
S = Bulk
Resistor Wirewound Chasis Mount
RWC Series
MECHANICAL CHARACTERISTICS
Package Code
Dimensions
Inches [mm]
G1
G2
G3
G4
A (Tolerances)
±0.005 [±0.13 mm]
0.444 [11.28]
0.562 [14.27]
0.719 [18.26]
1.563 [39.70]
B (Tolerances)
±0.005 [±0.13 mm]
0.490 [12.45]
0.625 [15.88]
0.781 [19.84]
0.844 [21.44]
C (Tolerances)
±0.031 [±0.79 mm]
0.600 [15.24]
0.750 [19.05]
1.062 [26.97]
1.968 [49.99]
D (Tolerances)
±0.062 [±1.57 mm]
1.125 [28.58]
1.320 [33.53]
1.870 [47.50]
2.760 [70.10]
E (Tolerances)
±0.015 [±0.38 mm]
0.334 [8.48]
0.430 [10.92]
0.530 [13.46]
0.615 [15.62]
F (Tolerances)
±0.015 [±0.38 mm]
0.646 [16.41]
0.800 [20.32]
1.080 [27.43]
1.140 [28.96]
G (Tolerances)
±0.015 [±0.38 mm]
0.320 [8.13]
0.400 [10.16]
0.560 [14.22]
0.615 [15.62]
H (Tolerances)
±0.010 [±0.25 mm]
0.065 [1.65]
0.075 [1.91]
0.085 [2.16]
0.085 [2.16]
J (Tolerances)
±0.010 [±0.25 mm]
0.140 [3.56]
0.190 [4.83]
0.260 [6.60]
0.300 [7.62]
K (Tolerances)
±0.010 [±0.25 mm]
0.078 [1.98]
0.093 [2.36]
0.172 [4.37]
0.196 [4.98]
L (Tolerances)
±0.005 [±0.13 mm]
0.093 [2.36]
0.093 [2.36]
0.125 [3.18]
0.125 [3.18]
M (Tolerances)
±0.015 [±0.38 mm]
0.078 [1.98]
0.102 [2.60]
0.125 [3.18]
0.125 [3.18]
N (Tolerances)
±0.006 [±0.15 mm]
0.050 [1.27]
0.080 [2.03]
0.080 [2.03]
0.080 [2.03]
O (Tolerances)
±0.062 [±1.57 mm]
0.266 [6.76]
0.312 [7.93]
0.438 [11.13]
0.438 [11.13]
P (Tolerances)
±0.031 [±0.79 mm]
0.245 [6.22]
0.312 [7.92]
0.391 [9.93]
0.422 [10.72]
Q (Tolerances)
±0.002 [±0.05 mm]
0.051 [1.30]
0.098 [2.49]
0.098 [2.49]
0.098 [2.49]
R (Tolerances)
±0.031 [±0.79 mm]
0.085 [2.16]
0.160 [4.06]
0.185 [4.70]
0.185 [4.70]
RER-60 / RE-60
RER-65 / RE-65
RER-70 / RE-70
RER-75 / RE-75
MIL-R-39009 / MIL-R-18546
www.johanson dielectrics.com
41
Resistor Wirewound Chasis Mount
RWC Series
ENVIRONMENTAL PERFORMANCE
DR
Environmental Performance (MIL-STD 202)
Vibration
± 0.1 % + 0.05 Ω
Load Life
± 1% + 0.05 Ω
Moisture Resistance
± 0.2 % + 0.05 Ω
Dielectric
± 0.2 % + 0.05 Ω
Storage
± 0.2 % + 0.05 Ω
Shock
± 0.1 % + 0.05 Ω
Thermal Shock
± 0.2 % + 0.05 Ω
5X Overload (5s)
± 0.2 % + 0.05 Ω
CONSTRUCTION NOTES:
 Centerless ground ceramic core
 Tinned copper or copperweld leads
 All welded terminations
 High Temperature epoxy molding compound
 Anodized aluminum housing
* Moisture Sensitivity Level: MSL-1
Power Derating Curve
120
Rated Power ( % )
100
Mo
un
ted
80
on
He
ats
i
G1 & G2
60
nk
Free-Air Derating:
G1, G2, G3, G4
G3
40
G4
20
0
0
50
100
150
200
250
300
350
Ambient Temperature (°C)
This datasheet is subject to change without notice.
42
www.johanson dielectrics.com
Resistor Thin Film Precision
RNP Series
KEY FEATURES
• Resistances from 1 Ohm to 3M Ohms
• Resistance Tolerances to ± 0.01%
• Power Rating 0.06 to 0.75 watts
• TCR’s up to ± 5ppm/ºC
• Operating Temperature: - 55ºC to 155ºC
• Available in sizes 0402,0603, 0805, 1206, 2010, 2512
APPLICATIONS
• Motor Control
• Precision Scales
• Smart Grid Metering
• Temperature Sensors
PRODUCT SUMMARY
STANDARD POWER RATING (PAGE 44)
PACKAGE
SIZE
RESISTANCE RANGE
(Ω)
HIGH POWER RATING (PAGE 45)
POWER RATING (W)
AT 70ºC
RESISTANCE RANGE
(Ω)
POWER RATING (W)
AT 70ºC
0402
1 - 511K
0.0625
-
-
0603
1 - 1M
0.0625
4.7 - 1M
0.100
0805
1 - 2M
0.100
1 - 1M
0.125
1206
1 - 2.49M
0.125
4.7 - 1M
0.250
2010
1 - 3M
0.250
4.7 - 1M
0.333
2512
1 - 3M
0.500
1 - 2K
0.750
Power Derating Curve
AVAILABLE OPTIONS (Consult Factory)
•
Special Testing Requirements
Rated Power ( % )
100
80
60
40
20
0
0
20
40
60
70
80
100
120
140
155
Ambient Temperature (°C)
HOW TO ORDER
RNP
14
H
W
003K8
B
T
RESISTOR THIN FILM
PRECISION
PACKAGE
CODE
POWER RATING
TEMPERATURE
COEFFICIENT OF
RESISTANCE (TCR)
RESISTANCE
TOLERANCE
PACKING
038R0 = 38Ω
003K8 = 3.8KΩ
038K0 = 38.0KΩ
380K0 = 380.0KΩ
003M8 = 3.8MΩ
Letter denotes
decimal place.
R = decimal., “K” 103, “M” 106
Remaining 4 digits are
significant or placeholders.
T = ± 0.01%
A = ± 0.05%
B = ± 0.1%
C = ± 0.25%
D = ± 0.5%
F = ±1.0%
T = Paper
Tape
07 = 0402
14 = 0603
15 = 0805
18 = 1206
19 = 2010
20 = 2512
S = Standard
H = High Power
X = ± 5ppm/°C
W = ± 10ppm/°C
V = ± 15ppm/ºC
T = ± 25ppm/ºC
Q = ± 50ppmºC
Example P/N:
RNP14HW003K8BE is Resistor Thin Film Precision, 0603 size, high power rating, ±10ppm/ºC, 3.8KΩ, ±0.1%, embossed tape & reel
www.johanson dielectrics.com
43
Resistor Thin Film Precision
RNP Series
STANDARD POWER RATING SPECIFICATIONS
Standard
Package Size
Size 0402
Size 0603
Size 0805
Max Working
Voltage (V) 1
25V
50V
100V
Max Overload
Voltage (V) 2
50V
100V
200V
0.0625
0.0625
0.100
(RNP07S)
Power Rating (W)
at 70ºC
±5
TCR PPM/°C
±10
±15
(RNP14S)
±25
±0.01%
Tolerance
49.9Ω to
12KΩ
±0.05%
Tolerance
±0.1%
Resistance
Range
Tolerance
±0.25%
(Ω)
Tolerance
49.9Ω
to
4.99KΩ
±0.5%
Tolerance
±50
-
49.9Ω
to
69.8KΩ
±10
±15
±25
24.9Ω to 100KΩ
49.9Ω to 12KΩ
10Ω to 255KΩ
49.9Ω
to
60KΩ
±5
(RNP15S)
±50
±5
-
±10
±15
24.9Ω to 200KΩ
4.7Ω to 332KΩ
24.9Ω
to
15KΩ
4.7Ω to 511KΩ
±50
-
4.7Ω to 1MΩ
4.7Ω to 1MΩ
4.7Ω
to
511KΩ
±25
1Ω
to
1MΩ
4.7Ω to 2MΩ
24.9Ω
to
30KΩ
4.7Ω
to
1MΩ
1Ω
to
1MΩ
1Ω to 2MΩ
±1%
Tolerance
Standard
Package Size
Size 1206
Size 2010
Size 2512
Max Working
Voltage (V) 1
150V
150V
150V
Max Overload
Voltage (V) 2
300V
300V
300V
Power Rating (W)
at 70ºC
0.125
0.250
0.500
(RNP18S)
±5
TCR PPM/°C
±0.01%
±10
±15
±0.05%
(Ω)
±0.25%
Tolerance
Tolerance
±0.5%
Tolerance
±50
±5
-
±10
±15
24.9Ω to 499KΩ
24.9Ω
to
49.9KΩ
4.7Ω to 2.49MΩ
4.7Ω to 1MΩ
1Ω to 2.49MΩ
(RNP20S)
±25
±50
±5
-
24.9Ω
to
100KΩ
4.7Ω to
3MΩ
4.7Ω to 1MΩ
2
24.9Ω
to
100KΩ
1Ω to 3MΩ
( P * R ) or MAX Listed, whichever is lower.
Overload Voltage = 2.5 * ( P * R ) or MAX Listed, whichever is lower.
44
±25
±50
-
4.7Ω to
1MΩ
Tolerance
Working Voltage =
±15
24.9Ω to 499KΩ
±1%
1
±10
4.7Ω to
1MΩ
4.7Ω to 1MΩ
Tolerance
±0.1%
±25
24.9Ω to 499KΩ
Tolerance
Resistance
Range
(RNP19S)
www.johanson dielectrics.com
4.7Ω to
3MΩ
4.7Ω to 1MΩ
1Ω to 3MΩ
Resistor Thin Film Precision
RNP Series
HIGH POWER RATING SPECIFICATIONS
High Power
Package Size
Size 0603
Size 0805
Size 1206
Max Working
Voltage (V) 1
75V
150V
200V
Max Overload
Voltage (V) 2
150V
300V
400V
Power Rating (W)
at 70ºC
0.100
0.125
0.250
(RNP14H)
±5
TCR PPM/°C
±10
±0.01%
±15
±25
±0.05%
Tolerance
±0.25%
(Ω)
Tolerance
±5
±10
±15
24.9Ω
to
15KΩ
±25
±50
±5
4.7Ω to 332KΩ
±10
±15
±25
±50
24.9Ω to 499KΩ
4.7Ω to 511KΩ
24.9Ω
to
30KΩ
4.7Ω to 1MΩ
±0.5%
(RNP18H)
24.9 to 200K
4.7Ω to 332KΩ
Tolerance
±0.1%
±50
24.9Ω to 100KΩ
Tolerance
Resistance
Range
(RNP15H)
4.7Ω to1 MΩ
4.7Ω to
511KΩ
Tolerance
4.7Ω
to
1MΩ
24.9Ω
to
49.9KΩ
4.7Ω to 1MΩ
1Ω to 1MΩ
±1%
Tolerance
High Power
Package Size
Size 2010
Size 2512
Max Working
Voltage (V) 1
200V
200V
Max Overload
Voltage (V) 2
400V
400V
Power Rating (W)
at 70ºC
0.333
0.750
(RNP19H)
±5
TCR PPM/°C
±0.01%
±10
±15
(RNP20H)
±25
±50
24.9Ω to 499KΩ
Tolerance
±10
±15
±25
±50
24.9Ω to 2KΩ
±0.05%
Tolerance
Resistance
Range
(Ω)
±0.1%
4.7Ω to 2KΩ
Tolerance
24.9Ω
to
±0.25%
49.9KΩ
Tolerance
4.7Ω to 1MΩ
±0.5%
1Ω to 2KΩ
Tolerance
±1%
Tolerance
1
Working Voltage =
2
Overload Voltage = 2.5 * ( P * R ) or MAX Listed, whichever is lower.
( P * R ) or MAX Listed, whichever is lower.
www.johanson dielectrics.com
45
Resistor Thin Film Precision
RNP Series
MECHANICAL CHARACTERISTICS
Dimensions
L (Length)
Inches [mm]
W (Width)
Inches [mm]
T (Thickness)
EB (End Band)
0402
0.04 [1.02]
0.02 [0.51]
0.012 [0.30]
0.007 [0.18]
0603
0.06 [1.52]
0.03 [0.76]
0.018 [0.46]
0.012 [0.30]
0805
0.08 [2.03]
0.05 [1.27]
0.022 [0.56]
0.012 [0.30]
1206
0.12 [3.05]
0.06 [1.52]
0.022 [0.56]
0.016 [0.41]
2010
0.19 [4.83]
0.09 [2.29]
0.022 [0.56]
0.023 [0.58]
2512
0.25 [6.35]
0.12 [3.05]
0.022 [0.56]
0.023 [0.58]
Package Size
Inches [mm]
Inches [mm]
ENVIRONMENTAL CHARACTERISTICS
Requirement
Tolerance
<0.05%
Tolerance
>0.05%
Conditions
Bending Strength
DR±0.05%
DR±0.2%
Bending amplitude 3mm for 10 seconds
Resistance to Soldering Heat
DR±0.05%
DR±0.2%
260±5°C for 10 seconds
Thermal Shock
DR±0.05%
DR±0.25%
-55°C~150°C, 100 cycles
Test
Insulation Resistance
>1000 MΩ
Apply 100VDC for 1 minute
As Spec.
+25/-55/+25/+125/+25°C
95% min coverage
245±5°C for 3 seconds
TCR
Solderability
DR±0.05%
Damp Heat With Load
DR±0.3%
DR±0.5%
(For High Power Rating)
DR±0.05%
DR±0.2%
70±2°C, Max. working voltage for
1000 hrs with 1.5 hrs“ON” and 0.5 hrs “OFF”
>7kΩD R±0.5%
Load Life
40±2°C, 90~95% R.H. Max. working voltage for
1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF”
DR±0.5%
(For High Power Rating)
DR±0.05%
Low Temperature Operation
DR±0.2%
1 hour, -65°C, followed by 45 minutes of RCWV
DR±0.5%
(For High Power Rating)
DR±0.05%
Short Time Overload
DR±0.2%
DR±0.2%
RCWV*2.5 or Max. overload voltage for 5 seconds
(For High Power Rating)
* Moisture Sensitivity Level: MSL-1
This datasheet is subject to change without notice.
46
www.johanson dielectrics.com
Resistor Thin Film Current Sense
RNC Series
KEY FEATURES
• Resistances from 0.5 mOhms to 15 mOhms
• Resistance Tolerances to ± 1%
• Customized Resistance available
• Power Rating up to 3 Watts
• TCR’s to ± 50 ppm/ ºC
• Available in sizes 1206 / 2010 / 2512
APPLICATIONS
• Engine Sensors
• Surge Protection
• Data Recorders
• Temperature Sensors
PRODUCT SUMMARY
PRODUCT
SERIES
(RNC)
PACKAGE
SIZE
POWER
RATING
(W) at 80ºC
RESISTANCES
(mΩ)
RNC18
1206
1
0.5 - 10
RNC19
2010
1.5
0.5 - 10
RNC20 1
RNC20A 2
RNC20B 3
RNC20C 3
2512
± 50
6, 6.5, 7
± 75
4, 5, 10
± 100
2.5, 3
± 150
0.5, 0.75, 1, 1.5, 2, 6.5, 7, 8, 9, 10
± 50
6, 6.5, 7
± 75
4, 5, 10
± 100
2.5, 3
± 150
2
2512
4, 4.5, 5, 6
± 50
0.5, 0.75
± 100
1, 1.5, 2, 2.5, 3, 3.5
± 50
2.5
2512
3
TOLERANCES
TEMPERATURE
RANGE
± 50
± 100 (0.5 Ω)
0.5, 0.75, 1, 1.5, 2, 11, 12, 13, 14, 15
1
2512
TCR
(ppm/ºC)
± 50
± 200 (0.5 Ω)
1%
3%
1
Maximum Operating Current =
-55ºC to +170ºC
5%
11, 12, 13, 14, 15 mΩ - coating is green
2 6.5, 7, 8, 9, 10 mΩ at 50ppm - coating is green
3 All values contain green coating
HOW TO ORDER
RNC
20
E
N
R00075
F
E
RESISTOR THIN FILM
CURRENT SENSE
PACKAGE
CODE
POWER RATING,
WATTS
TEMPERATURE
COEFFICIENT OF
RESISTANCE (TCR)
RESISTANCE
TOLERANCE
PACKING
18 = 1206
19 = 2010
20 = 2512
A = 1.0W
B = 1.5W
C = 2.0W
D = 2.5W
E = 3.0W
Q = ± 50ppm/°C
P = ± 75ppm/°C
N = ± 100ppm/ºC
M = ±150ppm/ºC
L = ± 200ppm/ºC
R00075 = 0.00075Ω (0.75mΩ)
0R0005 = 0.0005Ω (0.5mΩ)
00R001 = 0.001Ω (1mΩ)
0R0015 = 0.0015Ω (1.5mΩ)
Letter denotes decimal place.
R = decimal., “K” 103, “M” 106
Remaining 5 digits are
significant or placeholders.
F = ± 1.0%
H = ± 3.0%
J = ± 5.0%
E = Embossed
Tape & Reel
Example P/N: RNC20ENR00075FT is Resistor Thin Film Current Sense, size 2512, 3.0W, ±100ppm/ºC, 0.00075Ω (0.75mΩ), ±1.0%, embossed tape & reel
www.johanson dielectrics.com
47
Resistor Thin Film Current Sense
RNC Series
ELECTRICAL & MECHANICAL CHARACTERISTICS
Package Code
RNC18
(Size1206)
RNC19
(Size 2010)
RNC20
(Size 2512)
RNC20
w/Green
Coating
(Size 2512)
48
Power Rating
(W)
1
1.5
1
1 to 3
Resistance
Value (Ω)
L (Length)
[mm]
W (Width)
[mm]
T (Thickness)
[mm]
EB (End Band)
[mm]
0.5
3.20 ±0.25
1.60 ±0.10
0.60 ±0.20
1.35 ±0.25
0.75
3.20 ±0.25
1.60 ±0.10
0.60 ±0.20
1.23 ±0.25
1, 4, 5, 6
3.20 ±0.25
1.60 ±0.10
0.60 ±0.20
1.10 ±0.25
2, 3, 10
3.20 ±0.25
1.60 ±0.10
0.60 ±0.20
0.60 ±0.25
7, 8, 9
3.20 ±0.25
1.60 ±0.10
0.60 ±0.20
0.90 ±0.25
0.5
5.08 ±0.25
2.54 ±0.15
0.60 ±0.20
2.17 ±0.25
0.75
5.08 ±0.25
2.54 ±0.15
0.60 ±0.20
2.04 ±0.25
1
5.08 ±0.25
2.54 ±0.15
0.60 ±0.20
1.84 ±0.25
2, 6, 7, 8
5.08 ±0.25
2.54 ±0.15
0.60 ±0.20
1.54 ±0.25
3
5.08 ±0.25
2.54 ±0.15
0.60 ±0.20
1.04 ±0.25
4, 5
5.08 ±0.25
2.54 ±0.15
0.60 ±0.20
1.84 ±0.25
9, 10
5.08 ±0.25
2.54 ±0.15
0.60 ±0.20
1.29 ±0.25
0.5
6.35 ±0.254
3.18 ±0.254
1.25 ±0.20
1.30 ±0.38
0.75
6.35 ±0.254
3.18 ±0.254
0.75 ±0.20
1.30 ±0.38
1
6.35 ±0.254
3.18 ±0.254
0.65 ±0.20
1.30 ±0.38
1.5
6.35 ±0.254
3.18 ±0.254
0.45 ±0.20
1.30±0.38
2
6.35 ±0.254
3.18 ±0.254
0.35 ±0.20
1.30 ±0.38
2.5
6.35 ±0.254
3.18 ±0.254
0.65 ±0.20
1.30 ±0.38
3
6.35 ±0.254
3.18 ±0.254
0.55 ±0.20
1.30 ±0.38
4
6.35 ±0.254
3.18 ±0.254
0.45 ±0.20
1.30 ±0.38
5
6.35 ±0.254
3.18 ±0.254
0.35 ±0.20
1.30 ±0.38
6
6.35 ±0.254
3.18 ±0.254
0.32 ±0.20
1.30 ±0.38
6.5
6.35 ±0.254
3.18 ±0.254
0.30 ±0.20
1.30 ±0.38
7
6.35 ±0.254
3.18 ±0.254
0.27 ±0.20
1.30 ±0.38
10
6.35 ±0.254
3.18 ±0.254
0.25 ±0.20
1.30 ±0.38
0.5
6.35 ±0.25
3.00 ±0.20
0.60 ±0.20
2.68 ±0.25
0.75
6.35 ±0.25
3.00 ±0.20
0.60 ±0.20
2.48 ±0.25
1, 5, 6
6.35 ±0.25
3.00 ±0.20
0.60 ±0.20
1.93 ±0.25
1.5, 6.5, 7
6.35 ±0.25
3.00 ±0.20
0.60 ±0.20
1.43 ±0.25
2, 3
6.35 ±0.25
3.00 ±0.20
0.60 ±0.20
1.18 ±0.25
4, 4.5
6.35 ±0.25
3.00 ±0.20
0.60 ±0.20
2.18 ±0.25
8 to 15
6.35 ±0.25
3.00 ±0.20
0.60 ±0.20
1.18 ±0.25
www.johanson dielectrics.com
Resistor Thin Film Current Sense
RNC Series
Power Derating Curve
Rated Power ( % )
120
100
80
60
40
20
0
0
20
40
60
80
100
120
140
160
180
Ambient Temperature (°C)
SPECIFICATIONS
Specification
Test
Black Coating
Solderability
Green Coating
Test Method
95% min. coverage
245 ±5°C for 3 seconds
As Spec.
+25/-55/+25/+125/+25°C
Temperature Coefficient
of Resistance
Dry Heat
± 1.0%
± 1.0%
at +170°C for 1000 hrs
Load Life
± 1.0%
± 1.0%
70 ±2°C, Max. working voltage for 1000 hrs with
1.5 hrs “ON”and 0.5 hrs “OFF”
Short Time Overload
± 0.5%
± 1.0%
5x rated power for 5 seconds
Resistance to Soldering Heat
± 0.5%
± 1.0%
260 ±5°C for 10 seconds
Thermal Shock
± 0.5%
± (0.5% + 0.05Ω)
-55°C ~ 150°C, 100 cycles
Note: Green coating cannot be used in solder bath
PACKAGING INFORMATION
Package Code
RNC18
RNC19
RNC20
(Reel Size 1206)
(Reel Size 2010)
(Reel Size 2512)
Quantity
2000
Type
Embossed Tape
* Moisture Sensitivity Level: MSL-1
AVAILABLE OPTIONS (Consult Factory)
•
Special Testing Requirements
This datasheet is subject to change without notice.
www.johanson dielectrics.com
49
Resistor High Power Low Inductance
RHX Series
KEY FEATURES
• Resistances from 51k Ohms
• High Stability Film Resistance Elements
• Rated Power of 35, 50 and 100 Watts
• TO-220 and TO-247 Housing
• Resistance tolerance of ± 0.1% or ± 1%
• Low Inductance of < 10nH for RHXH1 and RHXH2,
<50nH for RHXH3
APPLICATIONS
• Power Inverters
• Power Supplies
• Engine Sensors
• Temperature Sensors
PRODUCT SUMMARY
PRODUCT SERIES
(RHX)
RESISTANCE RANGE (Ω) 3
MIN
MAX
POWER RATING (W)
HEATSINK 1
THERMAL
RESISTANCE
TOLERANCES
RHXH1
0.02
51K
35
1
3.3ºC/W
± 1% ( R≥0.1Ω )
± 5%
RHXH2
0.02
51K
50
1
2.3°C/W
± 1% ( R≥0.1Ω )
± 5%
RHXH3
0.02
51K
100
3
1.3°C/W
± 1% ( R≥0.10Ω )
± 5%
AVAILABLE OPTIONS (Consult Factory)
•
FREE AIR 2
1
Power Rating based on 25ºC Flange Temperature
2
Power Rating based on 25ºC Ambient Temperature
3
Contact Factory for Higher or Lower Values
TEMPERATURE COEFFICIENTS:
Special Testing Requirements
 ± 50ppm/°C ( R≥10Ω )
 ± 100ppm/°C ( 0.1Ω ≤ R < 10Ω )
 ± 250ppm/°C ( R < 0.1Ω )
HOW TO ORDER
RHX
H2
Q
038K0
F
4
RESISTOR HIGH POWER
LOW INDUCTANCE
PACKAGE CODE
TEMPERATURE COEFFICIENT
OF RESISTANCE (TCR)
RESISTANCE
TOLERANCE
PACKING
Q = ± 50ppm/°C
N = ± 100ppm/ºC
K = ±250ppm/ºC
0R038 = 0.038Ω
003K8 = 3.8KΩ
038K0 = 38.0KΩ
380K0 = 380.0KΩ
003M8 = 3.8MΩ
Letter denotes decimal place.
R = decimal., “K” 103, “M” 106
Remaining 4 digits are
significant or placeholders.
F = ± 1.0% (R ≥ 0.1Ω)
J = ± 5.0%
4 = Tube
H1, 35W, TO-220
H2, 50W, TO-220
H3, 100W, TO-247
Example P/N: RHXH2Q038K0F4 is Resistor High Power Low Inductance, 50W TO-220, ±50ppm/ºC, 38.0KΩ, ±1.0%, tube
* Tin/Lead coated leads, add "- Pb" on part number
50
www.johanson dielectrics.com
Resistor High Power Low Inductance
RHX Series
ENVIRONMENTAL CHARACTERISTICS
Electrical Characteristics
RHXH1 & RHXH2 Values
RHXH3 Value
25A
-
<10nH ( At the Standoff )
-
>1000 Megohm
>1000 Megohm
Dielectric Strength
2000 VAC
2500 VAC
Temperature Range
-55°C to +155°C
-55°C to +155°C
Maxiumum Current
Inductance
Insulation Resistance
Maximum Working Voltage
(500V MAX)
700 V or
, whichever is less
Power Derating Curve
Rated Power ( % )
120
100
80
60
40
20
0
-25
0
25
50
75
100
125
150
175
Backplate Temperature (°C)
RHXH1 & RHXH2 POWER RATING NOTES:

H1 and H2 High Power Low Inductance Resistors must
be attached to a suitable heatsink. Without a heatsink,
the maximum power rating is 1W.

The maximum internal resistor temperature is 155°C.

Use the following formula to specify an appropriate
heatsink:
RHXH3 POWER RATING NOTES:



H3 High Power Low Inductance Resistors must be
attached to a suitable heatsink.
The maximum internal resistor temperature is 155°C.
Use the following formula to specify appropriate
heatsink:
Where: RqH = Thermal Resistance of Heatsink ( °C/W )
RqR = Thermal Resistance of Resistor ( °C/W )
TMAX = Maximum Temperature of Resistor ( °C )
TA = Ambient Temperature of Heatsink ( °C )
P = Power Through Resistor ( W )
www.johanson dielectrics.com
51
Resistor High Power Low Inductance
RHX Series
MECHANICAL CHARACTERISTICS
RHXH1 & RHXH2
MOUNTING NOTES:
 H1 and H2 High Power Low Inductance Resistors must
be attached to a suitable heatsink.
 Use thermal grease to mount resistor to a clean, flat
surface.

Use a compression washer to provide 150 to 300
pounds ( 665 to 1330N ) of mounting force.

Torque mounting screw to 8 in-lbs ( 0.9 N-m ).

Mounting tab is isolated from both pins.
RHXH3
MOUNTING NOTES:
 H3 High Power Low Inductance Resistors must be
attached to a suitable heatsink.

Use thermal grease to mount resistor to a clean,
flat surface.

Use a compression washer to provide 150 to
300 pounds ( 665 to 1330N ) of mounting force.

Torque mounting screw to 8 in-lbs ( 0.9 N-m ).

Back plate is isolated from both pins.
ENVIRONMENTAL CHARACTERISTICS
DR
Environmental Performance
RHXH1
RHXH2
RHXH3
Test Conditions
Humidity Resistance
±1% + 0.05Ω
40°C, 90-95% RH, DC 0.1W, 1000 hr
Load Life
±1% + 0.05Ω
25°C, 90 min ON, 30 min OFF, 1000 hr
Temperature Cycle
±0.25% + 0.05Ω
-55°C for 30 min, +155°C for 30 min, 1000 hr
Vibration
±0.25% + 0.05Ω
IEC60068-2-6
Solder Heat
±0.1% + 0.05Ω
+350°C, 3s
* Moisture Sensitivity Level: MSL-1
This datasheet is subject to change without notice.
52
www.johanson dielectrics.com
Resistor Thick Film, High Temperature
RKS Series
KEY FEATURES
• Resistances from 10m to 1TOhms
• Resistance Tolerances to ± 0.25%
• Power Rating 0.05 to 2 Watts
• Non-Magnetic
• TCR’s to ± 25ppm/ºC
• Special High Temperature Version to 300ºC
• High Value Thick Film Resistance Element
• Available in sizes 0420, 0603, 0805, 1206, 1210, 2512, 4020
APPLICATIONS
• Engine Sensors
• Surge Protection
• Data Recorders
• Temperature Sensors
PRODUCT SUMMARY
2
SIZE
POWER RATING
(W) 1
RKS07
0402
0.050
30
60
RKS14
0603
0.1
75
150
RKS15
0805
0.125
100
200
RKS18
1206
0.25
200
400
RKS41
1210
0.35
300
600
RKS20
2512
1.00
1500
2000
RKS21
4020
2.00
4000
6000
Solder Pads must have sufficient heat conduction
See Power Derating Curve
Power Derating Curve
80
60
p
40
rd
Special Testing Requirements
100
da
AVAILABLE OPTIONS (Consult Factory)
- 55°C to + 300°C
(High Temperature Version
TCR valid + 25°C to + 125°C )
m
Te
TOLERANCE RANGE: ± 0.25% to ± 30%

gh

- 55°C to + 155°C
(Standard Version)
Hi
TEMPERATURE COEFFICIENT: ± 25ppm/ºC to ± 3000ppm/ºC

n
Sta

•
TEMPERATURE
RANGE 2
120
Rated Power ( % )
1
WORKING VOLTAGE (VAC)
TRIMMED
UNTRIMMED (> 5%)
PRODUCT SERIES
(RKS)
20
0
0
HOW TO ORDER
50
100
150
200
250
300
350
Ambient Temperature (°C)
RKS
21
W
N
038M0
K
E
RESISTOR
THICK FILM
PACKAGE
CODE
OPERATING
TEMPERATURE
TEMPERATURE
COEFFICIENT OF
RESISTANCE (TCR)
RESISTANCE
TOLERANCE
PACKING
07 = 0402
14 = 0603
15 = 0805
18 = 1206
41 = 1210
20 = 2512
21 = 4020
S = -55ºC to + 155ºC
W = -55ºC to + 300ºC
038M0= 38.0MΩ
380M0 = 380MΩ
00368 = 3.86Ω
03860 = 386Ω
001T0 = 1.0TΩ
Letter denotes decimal place.
“M” 106, “G” 109, “T” 1012
Remaining 4 digits are significant or placeholders.
C = ± 0.25%
D = ± 0.50%
F = ± 1.0%
G = ± 2.0%
J = ± 5.0%
K = ± 10.0%
M = ± 20.0%
N = ± 30.0%
E = Embossed
Tape & Reel
T = ± 25ppm/ºC
Q = ± 50ppm/°C
N = ± 100ppm/ºC
K = ± 250ppm/ºC
J = ± 500ppm/ºC
H = ± 1000ppm/ºC
G = ± 2000ppm/ºC
F = ± 3000ppm/ºC
Example P/N: RKS21WN038M0KE is Resistor Thick Film, size 4020, -55ºC to + 300ºC, ±100ppm/ºC, 38.0MΩ, ±10.0%, embossed tape & reel
www.johanson dielectrics.com
53
Resistor Thick Film, High Temperature
RKS Series
ELECTRICAL CHARACTERISTICS
Tolerances Available ( % )
Temperature Coefficients Available ( ± ppm/°C ) 2
Voltage Coefficients Available ( ppm / V ) 2
Package
Size
Resistance Ranges ( W )
10M - 100M
>100M - 500M
>500M - 1G
>1G - 10G
>10G - 100G
>100G - 1T
0402
5 to 20%
50, 100
500ppm/V
5% to 20%
100, 250
1000ppm/V
5% to 20%
250, 500
1000ppm/V
10% to 30%
1000, 2000
2000ppm/V
10% to 30%
2000, 3000
5000ppm/V
Contact Factory
0603
1 to 20%
50, 100
500ppm/V
2% to 20%
100, 250
500ppm/V
5% to 20%
250, 500
1000ppm/V
5% to 30%
500, 1000
2000ppm/V
10% to 30%
2000, 3000
5000ppm/V
Contact Factory
0805
0.5 to 20%
50, 100
500ppm/V
2% to 20%
100, 250
500ppm/V
5% to 20%
250, 500
500ppm/V
5% to 20%
500, 1000
1000ppm/V
10% to 30%
1000, 2000
3000ppm/V
-
1206
0.5% to 20%
25, 50, 100
250ppm/V
2% to 20%
50, 100, 250
500ppm/V
5% to 20%
100, 250
500ppm/V
5% to 20%
500, 1000
500ppm/V
10% to 30%
1000, 2000
1000ppm/V
-
1210
0.5% to 20%
25, 50, 100
25ppm/V
2% to 20%
50, 100, 250
250ppm/V
5% to 20%
100, 250
250ppm/V
5% to 20%
250, 500
250ppm/V
5% to 20%
500, 1000
500ppm/V
10% to 30%
1000, 2000
2000ppm/V
2512 1
0.5% to 20%
25, 50, 100
25ppm/V
1% to 20%
25, 50, 100
50ppm/V
1% to 20%
100, 250
50ppm/V
2% to 20%
100, 250
100ppm/V
5% to 20%
250, 500
250ppm/V
10% to 30%
500, 1000
1000ppm/V
4020 1
0.25% to 10%
25, 50, 100
10ppm/V
0.5% to 20%
25, 50, 100
25ppm/V
1% to 20%
25, 50, 100
25ppm/V
2% to 20%
50, 100
50ppm/V
5% to 30%
100, 250
100ppm/V
10% to 30%
500, 1000
500ppm/V
1 TCR
in ppm/K; +25°C to +125°C; TCR below standard TCR (highest value) and values >100G; +25°C to +85°C
typical values, all negative, not for all TCR values available
2 VCR:
ENVIRONMENTAL PERFORMANCE
Specification
Value
Solderability
250°C, 3s
Max Soldering Temperature
260°C, 10s
Climatic Category
55 / 155 / 56
Max
DR
Long Term Stability
<1 G W
1 G W - 10 G W
>10 G W
Storage 125°C, 1000h
<1%
<2%
<5%
Load Life 70°C, 1000h
<0.5%
<1%
<2%
Maximum Voltage, 1000h
<0.5%
<1%
<2%
54
www.johanson dielectrics.com
Resistor Thick Film, High Temperature
RKS Series
MECHANICAL CHARACTERISTICS
Dimensions
Package Size
L (Length)
Inches [mm]
W (Width)
Inches [mm]
T (Thickness)
Inches [mm]
EB (End Band)
Inches [mm]
0402
0.037 ±0.002
[ 0.95 ±0.05 ]
0.018 ±0.002
[ 0.48 ±0.10 / -0.05 ]
0.012 ±0.002
[ 0.3 ±0.05 ]
0.004 +0.004 / -0.002
[ 0.1 +0.10 / -0.05 ]
0603
0.060 +0.006 / -0.002
[ 1.5 +0.15 / -0.05 ]
0.030 +0.008 / -0.002
[ 0.8 +0.15 / -0.05 ]
0.016 +0.006 / -0.002
[ 0.4 +0.15 / -0.05 ]
0.008 +0.008 / -0.004
[ 0.2 +0.2 / -0.1 ]
0805
0.080 +0.006 / -0.002
[ 2.0 +0.15 / -0.05 ]
0.050 +0.006 / -0.002
[ 1.25 +0.15 / -0.05 ]
0.016 +0.006 / -0.002
[ 0.4 +0.15 / -0.05 ]
0.012 +0.008 / -0.004
[ 0.3 +0.2 / -0.1 ]
1206
0.126 +0.006 / -0.002
[ 3.2 +0.15 / -0.05 ]
0.060 +0.008 / -0.002
[ 1.5 +0.2 / -0.05 ]
0.016 +0.006 / -0.002
[ 0.4 +0.15 / -0.05 ]
0.012 +0.008 / -0.004
[ 0.3 +0.2 / -0.1 ]
1210
0.126 +0.006 / -0.002
[ 3.2 +0.15 / -0.05 ]
0.098 +0.008 / -0.002
[ 2.5 +0.2 / -0.05 ]
0.020 +0.006 / -0.002
[ 0.5 +0.15 / -0.05 ]
0.032 ±0.008
[ 0.8 ±0.2 ]
2512
0.250 +0.006 / -0.002
[ 6.3 +0.15 / -0.05 ]
0.138 +0.008 / -0.002
[ 3.5 +0.2 / -0.05 ]
0.024 +0.006 / -0.002
[ 0.6 +0.15 / -0.05 ]
0.035 ±0.008
[ 0.9 ±0.2 ]
4020
0.400 +0.006 / -0.002
[ 10.2 +0.15 / -0.05 ]
0.200 +0.008 / -0.002
[ 5.1 +0.2 / -0.05 ]
0.024 +0.006 / -0.002
[ 0.6 +0.15 / -0.05 ]
0.035 ±0.008
[ 0.9 ±0.2 ]
PACKAGING INFORMATION
Bulk or Blistertape to IEC 60286-3
 Tape width 8mm / Reel Diameter 180 or 330mm
 Minimum quantity Bulk / 100 pieces per value (30 pieces per value for sizes 4020 and 2512)
 Minimum quantity Tape & Reel / 500 pieces per value
(Note: Except size 0402 / 1000 pieces per value)
* Moisture Sensitivity Level: MSL-1
This datasheet is subject to change without notice.
www.johanson dielectrics.com
55
Resistor Metal Element Current Sense
RMC Series
KEY FEATURES
• Resistances from 0.005 to 0.100 Ohms
• Low Inductance (<10nH)
• Tolerances to ± 1%
• Resistance Wire TCR: ± 20ppm/ºC
• For Current Sensing and Shunt Applications
• All Welded Construction
• Economical Bare Metal Element
APPLICATIONS
• Base Station
• Power Inverters
• Current Sensing
• Lightning Pulse Survival
PRODUCT SUMMARY
PRODUCT SERIES
(RMC)
1
POWER RATING @ 85ºC
(W)
RESISTANCE (Ω) 1
TOLERANCES
J1
1
0.005, 0.01, 0.02, 0.025, 0.03, 0.04, 0.05, 0.1
± 1% / ± 5%
J2
3
0.005, 0.01, 0.015, 0.02, 0.025, 0.03, 0.04, 0.05, 0.1
± 1% / ± 5%
J3
5
0.005, 0.01, 0.015, 0.02, 0.025, 0.03, 0.05, 0.1
± 1% / ± 5%
Contact Factory for other resistances
Power Derating Curve
120
100
•
Rated Power ( % )
AVAILABLE OPTIONS (Consult Factory)
Special Testing Requirements
80
60
40
20
0
0
50
100
150
200
250
300
350
Ambient Temperature (°C)
HOW TO ORDER
RMC
J2
U
0R005
F
S
RESISTOR METAL
ELEMENT CURRENT
SENSE
PACKAGE
CODE, WATTS
TEMPERATURE COEFFICIENT
OF RESISTANCE (TCR)
RESISTANCE
TOLERANCE
PACKING
F = ± 1.0%
J = ± 5.0%
S = Bulk
J1, 1.0W
J2, 3.0W
J3, 5.0W
U = ± 20ppm/ºC
0R005 = 0.005Ω (5mΩ)
0R025 = 0.025Ω (25mΩ)
00R05 = 0.05Ω (50mΩ)
000R1 = 0.1Ω (100mΩ)
Letter denotes decimal place.
R = decimal., “K” 103, “M” 106
Remaining 4 digits are significant or placeholders.
Example P/N: RMCJ2U0R005FS is Resistor Metal Element Current Sense, 3.0W, ±20ppm/ºC, 0.005Ω, ±1.0%, bulk
* For Tin/Lead coated leads, add "- Pb" to part number
56
www.johanson dielectrics.com
Resistor Metal Element Current Sense
RMC Series
MECHANICAL CHARACTERISTICS
Package Code
J1
1.0 [25.40mm] Max
1.0 [25.40mm] Max
0.450 [11.43mm]
0.600 [15.24mm]
0.800 [20.32mm]
0.040 [1.02mm]
0.040 [1.02mm]
0.040 [1.02mm]
0.065 [1.65mm]
0.065 [1.65mm]
0.065 [1.65mm]
0.125 [3.18mm]
0.125 [3.18mm]
0.125 [3.18mm]
(Tolerances) ±0.100" [±2.54mm]
L (Tolerances)
+0.040 / -0.020” [+1.02 / 0.51mm]
Inches [mm]
J3
0.200 [5.08]
H
Dimensions
J2
D (Tolerances)
±0.002” [±0.05mm]
W (Tolerances)
+0.010 / -0.005 [+0.25 / -0.13mm]
A (Tolerances)
±0.030” [±0.8mm]
PACKAGING INFORMATION
Package Code
J1
Standard Package Quantities
J2
J3
250 (Bulk Only)
* Moisture Sensitivity Level: MSL-1
This datasheet is subject to change without notice.
www.johanson dielectrics.com
57
Power Inductors, Semi-Shielded (Coated)
LPC Series
The Semi-shielded Power Inductor LPC Series are low profile
and high current power inductors. Several dimensions are
offered.
KEY FEATURES
• High Current Performance
• Small and Low Profile Inductors
• Magnetic shielding
• Available for automatic mounting in tape and reel package
APPLICATIONS
• DC/DC Converter
• Data Storage Devices
• Power Supplies
• Consumer Electronics
• Industrial
PRODUCT RANGE SUMMARY
SIZE
CODE
INDUCTANCE
RANGE
2410
RATED CURRENT RATED CURRENT
RANGE
RANGE
DC
RESISTANCE
RANGE
BASED ON
INDUCTANCE CHANGE
BASED ON
TEMPERATURE RISE
0.68 - 22.0 μH
0.40 - 2.60 A
0.40 - 2.50 A
60 mΩ - 1470 mΩ
3010
1.00 - 100.0 μH
0.15 - 2.30 A
0.18 - 2.30 A
50 mΩ - 5.00 Ω
3012
1.00 - 47.0 μH
0.23 - 1.90 A
0.35 - 1.71 A
45 mΩ - 1250 mΩ
3015
1.00 - 100.0 μH
0.25 - 2.30 A
0.30 - 2.30 A
28 mΩ - 2100 mΩ
4018
0.82 - 220.0 μH
0.30 - 4.70 A
0.28 - 4.00 A
16 mΩ - 2960 mΩ
4025
1.00 - 220.0 μH
0.20 - 3.00 A
0.20 - 3.00 A
12 mΩ - 2300 mΩ
5040
1.50 - 47.0 μH
1.10 - 6.00 A
0.90 - 3.60 A
15 mΩ - 270 mΩ
6045
1.00 - 220.0 μH
0.55 - 8.60 A
0.50 - 6.50 A
10 mΩ - 920 mΩ
1
OPERTING
TEMPERTURE
RANGE
-25ºC to +120ºC
-40ºC to +125ºC
1 Including self-generated heat
Consult Factory for values not listed in the product range
Electrical Schematic: No Polarity
TEST FREQUENCY: 100KHz, 1V
STORAGE TEMPERATURE: -10ºC to +40ºC, humidity 30 to 70% R.H.
MOISTURE SENSITIVITY LEVEL: MSL - 1
HOW TO ORDER
LPC
3015
2R2
M
E
INDUCTOR
POWER SEMI-SHIELDED
SIZE CODE
INDUCTANCE
TOLERANCE
PACKING
LPC
(Coated)
2410
3010
3012
3015
4018
4025
5040
6045
R68 = 0.68 μH
2R2 = 2.2 μH
220 = 22 μH
221 = 220 μH
M = ± 20%
N = ± 30%
See chart
Example P/N: LPC30152R2ME is semi-shielded power inductor 2.2 μH, 3015 size, ±20%, embossed tape & reel
58
www.johanson dielectrics.com
E = Embossed Tape & Reel
Power Inductors, Semi-Shielded (Coated)
LPC Series
2410 SIZE
Units
L
W
T
max
Inches
mm
Part
Material
0.094
2.40
1
Ferrite Core
Ni-Zn Ferrite
±0.004
±0.10
2
Copper Wire
Cu / P180 Grd 1
0.094
2.40
3
Termination
Ag / Ni / Sn
±0.004
±0.10
Adhesive
Silicon Base Resin
Magnetic Powder
Ni-Zn Ferrite
0.039
Not marked
4
1.00
*1
Part
Number
Inductance
@ 100KHz, 1V
Rated Current Based
on Inductance Change
LPC2410R68NE
0.68 μH, ±30%
2.60 A
LPC24101R0NE
1.0 μH, ±30%
2.00 A
LPC24101R5ME
1.5 μH, ±20%
LPC24102R2ME
LPC24103R3ME
LPC24104R7ME
Rated Current Based *2
on Temperature Rise
DC
Resistance
DC Resistance
Tolerance
2.50 A
60 mΩ
±30%
1.90 A
70 mΩ
±30%
1.50 A
1.50 A
110 mΩ
±20%
2.2 μH, ±20%
1.30 A
1.20 A
140 mΩ
±20%
3.3 μH, ±20%
1.05 A
1.00 A
220 mΩ
±20%
4.7 μH, ±20%
0.92 A
0.90 A
290 mΩ
±20%
LPC24106R8ME
6.8 μH, ±20%
0.75 A
0.65 A
410 mΩ
±20%
LPC2410100ME
10.0 μH, ±20%
0.60 A
0.55 A
690 mΩ
±20%
LPC2410150ME
15.0 μH, ±20%
0.50 A
0.45 A
1020 mΩ
±20%
LPC2410220ME
22.0 μH, ±20%
0.40 A
0.40 A
1470 mΩ
±20%
3010 SIZE
Units
L
W
T
max
Inches
mm
Part
Not marked
Material
0.118
3.00
1
Ferrite Core
Ni-Zn Ferrite
±0.004
±0.10
2
Copper Wire
Cu / P180 Grd 1
0.118
3.00
3
Termination
Ag / Ni / Sn
±0.004
±0.10
Adhesive
Silicon Base Resin
Magnetic Powder
Ni-Zn Ferrite
0.039
4
1.00
Rated Current Based *1 Rated Current Based *2
on Inductance Change
on Temperature Rise
Part
Number
Inductance
@ 100KHz, 1V
DC
Resistance
DC Resistance
Tolerance
LPC30101R0NE
1.0 μH, ±30%
2.30 A
2.30 A
50 mΩ
±25%
LPC30101R2NE
1.2 μH, ±30%
LPC30101R5NE
1.5 μH, ±30%
1.90 A
2.10 A
62 mΩ
±30%
1.65 A
2.00 A
70 mΩ
±30%
LPC30102R2ME
2.2 μH, ±20%
1.30 A
1.90 A
80 mΩ
±20%
LPC30103R3ME
3.3 μH, ±20%
1.05 A
1.80 A
130 mΩ
±20%
LPC30104R7ME
4.7 μH, ±20%
0.85 A
1.70 A
175 mΩ
±20%
LPC30106R8ME
6.8 μH, ±20%
0.70 A
1.30 A
260 mΩ
±20%
LPC3010100ME
10.0 μH, ±20%
0.60 A
0.90 A
350 mΩ
±20%
LPC3010150ME
15.0 μH, ±20%
0.50 A
0.80 A
510 mΩ
±20%
LPC3010220ME
22.0 μH, ±20%
0.40 A
0.70 A
780 mΩ
±20%
LPC3010330ME
33.0 μH, ±20%
0.32 A
0.50 A
1.10 Ω
±20%
LPC3010470ME
47.0 μH, ±20%
0.28 A
0.35 A
1.60 Ω
±20%
LPC3010101ME
100.0 μH, ±20%
0.15 A
0.18 A
5.00 Ω
±20%
*1. Idc1: Based on inductance change (ΔL/Lo: ≤ -30%)
*2. Idc2: Based on temperature rise (ΔT: 40ºC TYP.)
Notes: Inductance is measured in HP-4285A Precision LCR Meter.
RDC measured in DU-5011 milli ohm meter (or equivalent).
www.johanson dielectrics.com
59
Power Inductors, Semi-Shielded (Coated)
LPC Series
3012 SIZE
Units
L
W
T
Inches
mm
Part
Material
0.118
3.00
1
Ferrite Core
Ni-Zn Ferrite
±0.004
±0.10
2
Copper Wire
Cu / P180 Grd 1
0.118
3.00
3
Terminals
Ag / Ni / Sn
±0.004
±0.10
Adhesive
Silicon Base Resin
Magnetic Powder
Ni-Zn Ferrite
0.047
max
Not marked
4
1.20
*1
Part Number
Inductance
@ 100KHz, 1V
Rated Current Based
on Inductance Change
Rated Current Based
on Temperature Rise
LPC30121R0NE
1.0 μH, ±30%
1.90 A
LPC30121R5NE
1.5 μH, ±30%
1.50 A
LPC30122R2ME
2.2 μH, ±20%
LPC30122R7ME
LPC30123R3ME
*2
DC
Resistance
DC Resistance
Tolerance
1.71 A
45 mΩ
±20%
1.60 A
55 mΩ
±20%
1.25 A
1.37 A
60 mΩ
±20%
2.7 μH, ±20%
1.20 A
1.30 A
90 mΩ
±20%
3.3 μH, ±20%
1.05 A
1.21 A
90 mΩ
±20%
LPC30124R7ME
4.7 μH, ±20%
0.90 A
1.06 A
150 mΩ
±20%
LPC30126R8ME
6.8 μH, ±20%
0.70 A
0.89 A
190 mΩ
±20%
±20%
LPC3012100ME
10.0 μH, ±20%
0.60 A
0.72 A
270 mΩ
LPC3012150ME
15.0 μH, ±20%
0.50 A
0.57 A
450 mΩ
±20%
LPC3012220ME
22.0 μH, ±20%
0.40 A
0.50 A
550 mΩ
±20%
LPC3012330ME
33.0 μH, ±20%
0.30 A
0.41 A
900 mΩ
±20%
LPC3012470ME
47.0 μH, ±20%
0.23 A
0.35 A
1250 mΩ
±20%
3015 SIZE
Units
L
W
T
max
Inches
mm
Part
Material
0.118
3.00
1
Ferrite Core
Ni-Zn Ferrite
±0.004
±0.10
2
Copper Wire
Cu / P180 Grd 1
0.118
3.00
3
Termination
Ag / Ni / Sn
±0.004
±0.10
Adhesive
Silicon Base Resin
Magnetic Powder
Ni-Zn Ferrite
0.059
Not marked
4
1.50
Part Number
Rated Current Based
on Inductance Change
Rated Current Based
on Temperature Rise
LPC30151R0NE
1.0 μH, ±30%
2.30 A
LPC30151R5NE
1.5 μH, ±30%
2.10 A
LPC30152R2ME
2.2 μH, ±20%
LPC30152R7ME
2.7 μH, ±20%
*2
DC
Resistance
DC Resistance
Tolerance
2.30 A
28 mΩ
±30%
2.10 A
37 mΩ
±30%
1.62 A
2.00 A
58 mΩ
±20%
1.50 A
1.95 A
60 mΩ
±20%
±20%
LPC30153R3ME
3.3 μH, ±20%
1.35 A
1.80 A
75 mΩ
LPC30154R7ME
4.7 μH, ±20%
1.20 A
1.60 A
100 mΩ
±20%
LPC30155R6ME
5.6 μH, ±20%
1.00 A
1.40 A
120 mΩ
±20%
±20%
LPC30156R8ME
6.8 μH, ±20%
0.97 A
1.30 A
150 mΩ
LPC3015100ME
10.0 μH, ±20%
0.80 A
1.10 A
220 mΩ
±20%
LPC3015150ME
15.0 μH, ±20%
0.65 A
1.00 A
300 mΩ
±20%
*1. Idc1: Based on inductance change (ΔL/Lo: ≤ -30%)
*2. Idc2: Based on temperature rise (ΔT: 40ºC TYP.)
60
*1
Inductance
@ 100KHz, 1V
Notes: Inductance is measured in HP-4285A Precision LCR Meter.
RDC measured in DU-5011 milli ohm meter (or equivalent).
www.johanson dielectrics.com
Power Inductors, Semi-Shielded (Coated)
LPC Series
3015 SIZE (CONTINUED)
*1
Part Number
Inductance
@ 100KHz, 1V
Rated Current Based
on Inductance Change
Rated Current Based
on Temperature Rise
LPC3015180ME
18.0 μH, ±20%
0.57 A
*2
DC
Resistance
DC Resistance
Tolerance
0.90 A
410 mΩ
±20%
±20%
LPC3015220ME
22.0 μH, ±20%
0.55 A
0.80 A
475 mΩ
LPC3015330ME
33.0 μH, ±20%
0.45 A
0.70 A
650 mΩ
±20%
LPC3015390ME
39.0 μH, ±20%
0.40 A
0.50 A
850 mΩ
±20%
±20%
LPC3015470ME
47.0 μH, ±20%
0.35 A
0.45 A
1100 mΩ
LPC3015680ME
68.0 μH, ±20%
0.30 A
0.35 A
1700 mΩ
±20%
LPC3015820ME
82.0 μH, ±20%
0.27 A
0.32 A
1900 mΩ
±20%
LPC3015101ME
100.0 μH, ±20%
0.25 A
0.30 A
2100 mΩ
±20%
4018 SIZE
Units
L
W
Inches
mm
0.157
4.00
±0.008
±0.20
0.157
4.00
±0.008
±0.20
T
(R82-2R7)
0.074
1.88
max
(3R3-221)
0.071
1.80
Part
Material
1
Ferrite Core
Ni-Zn Ferrite
2
Copper
Wire
Cu / P180 Grd 1
3
Termination
Ag / Ni / Sn
Adhesive
Silicon Base Resin
Magnetic
Powder
Ni-Zn Ferrite
Marked
4
*1
*2
Part Number
Inductance
@ 100KHz, 1V
Rated Current Based
on Inductance Change
Rated Current Based
on Temperature Rise
DC
Resistance
DC Resistance
Tolerance
Marking
LPC4018R82NE
0.82 μH, ±30%
4.20 A
4.00 A
16 mΩ
±30%
R82
LPC40181R0NE
1.0 μH, ±30%
4.70 A
3.70 A
19 mΩ
±30%
1R0
LPC40181R2NE
1.2 μH, ±30%
4.00 A
3.50 A
21 mΩ
±30%
1R2
LPC40181R5NE
1.5 μH, ±30%
3.50 A
3.10 A
27 mΩ
±30%
1R5
LPC40182R2ME
2.2 μH, ±20%
3.00 A
2.90 A
37 mΩ
±20%
2R2
LPC40182R7ME
2.7 μH, ±20%
2.40 A
2.30 A
43 mΩ
±20%
2R7
LPC40183R3ME
3.3 μH, ±20%
2.30 A
2.20 A
55 mΩ
±20%
3R3
LPC40184R7ME
4.7 μH, ±20%
2.00 A
1.90 A
70 mΩ
±20%
4R7
LPC40186R8ME
6.8 μH, ±20%
1.60 A
1.50 A
98 mΩ
±20%
6R8
LPC4018100ME
10.0 μH, ±20%
1.40 A
1.30 A
150 mΩ
±20%
100
LPC4018150ME
15.0 μH, ±20%
1.10 A
1.00 A
220 mΩ
±20%
150
±20%
220
LPC4018220ME
22.0 μH, ±20%
0.95 A
0.90 A
290 mΩ
LPC4018330ME
33.0 μH, ±20%
0.75 A
0.70 A
460 mΩ
±20%
330
LPC4018470ME
47.0 μH, ±20%
0.62 A
0.60 A
650 mΩ
±20%
470
LPC4018680ME
68.0 μH, ±20%
0.50 A
0.50 A
940 mΩ
±20%
680
LPC4018101ME
100.0 μH, ±20%
0.45 A
0.42 A
1330 mΩ
±20%
101
LPC4018151ME
150.0 μH, ±20%
0.35 A
0.32 A
2000 mΩ
±20%
151
LPC4018121ME
220.0 μH, ±20%
0.30 A
0.28 A
2960 mΩ
±20%
221
*1. Idc1: Based on inductance change (ΔL/Lo: ≤ -30%)
*2. Idc2: Based on temperature rise (ΔT: 40ºC TYP.)
Notes: Inductance is measured in HP-4285A Precision LCR Meter.
RDC measured in DU-5011 milli ohm meter (or equivalent).
www.johanson dielectrics.com
61
Power Inductors, Semi-Shielded (Coated)
LPC Series
4025 SIZE
Units
L
W
T
max
Inches
mm
Marked
Part
Material
0.157
4.00
1
Ferrite Core
Ni-Zn Ferrite
±0.008
±0.20
2
Copper Wire
Cu / P180 Grd 1
0.157
4.00
3
Terminals
Ag / Ni / Sn
±0.008
±0.20
Adhesive
Silicon Base Resin
Magnetic Powder
Ni-Zn Ferrite
0.098
4
2.50
*1
Part Number
Inductance
@ 100KHz, 1V
Rated Current Based
on Inductance Change
Rated Current Based
on Temperature Rise
LPC40251R0NE
1.0 μH, ±30%
3.00 A
LPC40251R2NE
1.2 μH, ±30%
2.75 A
LPC40252R2NE
2.2 μH, ±30%
LPC40253R3ME
LPC40254R7ME
*2
DC
Resistance
DC Resistance
Tolerance
Marking
3.00 A
12 mΩ
±30%
1R0
2.75 A
18 mΩ
±30%
1R2
2.10 A
2.10 A
22 mΩ
±30%
2R2
3.3 μH, ±20%
1.60 A
1.60 A
30 mΩ
±20%
3R3
4.7 μH, ±20%
1.40 A
1.40 A
40 mΩ
±20%
4R7
LPC40256R8ME
6.8 μH, ±20%
1.20 A
1.20 A
70 mΩ
±20%
6R8
LPC4025100ME
10.0 μH, ±20%
0.97 A
0.97 A
85 mΩ
±20%
100
LPC4025150ME
15.0 μH, ±20%
0.77 A
0.77 A
120 mΩ
±20%
150
LPC4025220ME
22.0 μH, ±20%
0.67 A
0.67 A
195 mΩ
±20%
220
LPC4025330ME
33.0 μH, ±20%
0.50 A
0.50 A
305 mΩ
±20%
330
LPC4025470ME
47.0 μH, ±20%
0.40 A
0.40 A
495 mΩ
±20%
470
LPC4025680ME
68.0 μH, ±20%
0.35 A
0.35 A
710 mΩ
±20%
680
LPC4025101ME
100.0 μH, ±20%
0.30 A
0.30 A
1000 mΩ
±20%
101
LPC4025151ME
150.0 μH, ±20%
0.22 A
0.22 A
1600 mΩ
±20%
151
0.20 A
2300 mΩ
±20%
121
DC
Resistance
DC Resistance
Tolerance
Marking
LPC4025221ME
220.0 μH, ±20%
0.20 A
5040 SERIES
Units
L
W
T
max
Inches
mm
Part
Material
0.197
5.00
1
Ferrite Core
Ni-Zn Ferrite
±0.008
±0.20
2
Copper Wire
Cu / P180 Grd 1
0.197
5.00
3
Termination
Ag / Ni / Sn
±0.008
±0.20
Adhesive
Silicon Base Resin
Magnetic Powder
Ni-Zn Ferrite
.157
Marked
4
4.00
*2
Inductance
@ 100KHz, 1V
Rated Current Based
on Inductance Change
Rated Current Based
on Temperature Rise
LPC50401R5NE
1.5 μH, ±30%
6.00 A
3.60 A
15 mΩ
±20%
1R5
LPC50402R2NE
2.2 μH, ±30%
4.60 A
3.50 A
17 mΩ
±20%
2R2
±20%
3R3
LPC50403R3ME
3.3 μH, ±20%
3.80 A
3.30 A
22 mΩ
LPC50404R7ME
4.7 μH, ±20%
3.30 A
3.10 A
29 mΩ
±20%
4R7
LPC50406R8ME
6.8 μH, ±20%
2.60 A
2.30 A
49 mΩ
±20%
6R8
LPC50408R2ME
8.2 μH, ±20%
2.40 A
2.20 A
54 mΩ
±20%
8R2
LPC5040100ME
10.0 μH, ±20%
2.30 A
2.10 A
56 mΩ
±20%
100
*1. Idc1: Based on inductance change (ΔL/Lo: ≤ -30%)
*2. Idc2: Based on temperature rise (ΔT: 40ºC TYP.)
62
*1
Part Number
Notes: Inductance is measured in HP-4285A Precision LCR Meter.
RDC measured in DU-5011 milli ohm meter (or equivalent).
www.johanson dielectrics.com
Power Inductors, Semi-Shielded (Coated)
LPC Series
5040 SIZE (CONTINUED)
*1
Part Number
Inductance
@ 100KHz, 1V
Rated Current Based
on Inductance Change
Rated Current Based
on Temperature Rise
LPC5040150ME
15.0 μH, ±20%
2.00 A
LPC5040220ME
22.0 μH, ±20%
LPC5040270ME
27.0 μH, ±20%
*2
DC
Resistance
DC Resistance
Tolerance
Marking
1.80 A
80 mΩ
±20%
150
1.60 A
1.40 A
126 mΩ
±20%
220
1.40 A
1.30 A
165 mΩ
±20%
270
±20%
330
±20%
470
DC
Resistance
DC Resistance
Tolerance
Marking
LPC5040330ME
33.0 μH, ±20%
1.30 A
1.20 A
180 mΩ
LPC5040470ME
47.0 μH, ±20%
1.10 A
0.90 A
270 mΩ
6045 SIZE
Units
L
W
T
max
Inches
mm
Part
Material
0.236
6.00
1
Ferrite Core
Ni-Zn Ferrite
±0.008
±0.20
2
Copper Wire
Cu / P180 Grd 1
0.236
6.00
3
Terminals
Ag / Ni / Sn
±0.008
±0.20
Adhesive
Silicon Base Resin
Magnetic Powder
Ni-Zn Ferrite
0.177
Marked
4
4.50
*1
*2
Part Number
Inductance
@ 100KHz, 1V
Rated Current Based
on Inductance Change
Rated Current Based
on Temperature Rise
LPC60451R0NE
1.0 μH, ±30%
8.60 A
6.50 A
10 mΩ
±30%
1R0
±30%
1R3
LPC60451R3NE
1.3 μH, ±30%
8.00 A
6.00 A
11mΩ
LPC60451R8NE
1.8 μH, ±30%
7.00 A
5.30 A
12 mΩ
±30%
1R8
LPC60452R2NE
2.2 μH, ±30%
6.10 A
5.00 A
13 mΩ
±30%
2R2
LPC60453R0NE
3.0 μH, ±30%
5.00 A
4.80 A
17 mΩ
±30%
3R0
LPC60453R3NE
3.3 μH, ±30%
4.50 A
4.50 A
17 mΩ
±30%
3R3
LPC60454R5NE
4.5 μH, ±30%
4.30 A
3.80 A
23 mΩ
±30%
4R5
LPC60454R7NE
4.7 μH, ±30%
4.00 A
3.70 A
23 mΩ
±30%
4R7
LPC60455R6NE
5.6 μH, ±30%
3.80 A
3.60 A
26 mΩ
±30%
5R6
LPC60456R3NE
6.3 μH, ±30%
3.80 A
3.60 A
26 mΩ
±30%
6R3
LPC60456R8NE
6.8 μH, ±30%
3.60 A
3.50 A
34 mΩ
±30%
6R8
LPC60458R2NE
8.2 μH, ±30%
3.20 A
3.10 A
41 mΩ
±30%
8R2
LPC6045100ME
10.0 μH, ±20%
3.10 A
3.00 A
45 mΩ
±20%
100
LPC6045150ME
15.0 μH, ±20%
2.30 A
2.30 A
80 mΩ
±20%
150
LPC6045220ME
22.0 μH, ±20%
1.90 A
1.90 A
112 mΩ
±20%
220
LPC6045330ME
33.0 μH, ±20%
1.50 A
1.50 A
170 mΩ
±20%
330
LPC6045470ME
47.0 μH, ±20%
1.30 A
1.30 A
210 mΩ
±20%
470
LPC6045560ME
56.0 μH, ±20%
1.20 A
1.20 A
270 mΩ
±20%
560
LPC6045680ME
68.0 μH, ±20%
1.00 A
1.00 A
325 mΩ
±20%
680
LPC6045101ME
100.0 μH, ±20%
0.90 A
0.90 A
460 mΩ
±20%
101
LPC6045221ME
220.0 μH, ±20%
0.55 A
0.50 A
920 mΩ
±20%
221
*1. Idc1: Based on inductance change (ΔL/Lo: ≤ -30%)
*2. Idc2: Based on temperature rise (ΔT: 40ºC TYP.)
Notes: Inductance is measured in HP-4285A Precision LCR Meter.
RDC measured in DU-5011 milli ohm meter (or equivalent).
www.johanson dielectrics.com
63
Power Inductors, Semi-Shielded (Coated)
LPC Series
ENVIRONMENTAL PERFORMANCE
SPECIFICATION
64
TEST PARAMETERS
VIBRATION
ΔL/Lo : ≤ ±10%
There shall be no
mechanical damage
Solder specimen inductor on the test printed circuit board. Apply vibrations in
each of the x, y and z directions for 2 house for a total of 6 hours.
Frequency : 10 to 50 Hz Amplitude : 1.5mm
SOLDERABILITY
The metalized area must
have 90% minimum
solder coverage.
Dip pads in flux and dip in solder pot (NP303) at 240ºC ±5ºC
HIGH
TEMPERATURE
RESISTANCE
ΔL/Lo : ≤ ±10%
There shall be no
mechanical damage or
electrical damage.
The sample shall be left for 96 hours in an atmosphere with a temperature of
85±2ºC and a normal humidity. Upon completion of the test, the measurement
shall be made after the sample has been left in a normal temperature and
normal humidity for 1 hour.
LOW
TEMPERATURE
ΔL/Lo : ≤ ±10%
There shall be no
mechanical damage or
electrical damage.
The sample shall be left for 96 hours in an atmosphere with a temperature of
–30±2ºC. Upon completion of the test, the measurement shall be made after
the sample has been left in a normal temperature and normal humidity for 1
hour.
MOISTURE
STORAGE
ΔL/Lo : ≤ ±10%
There shall be no
mechanical damage
The sample shall be left for 96 hours in a temperature of 40±2ºC and a
humidity(RH) of 90~95%. Upon completion of the test, the measurement shall
be made after the sample has been left in a normal temperature and normal
humidity more than 1 hour.
SUBSTRATE
BENDING
ΔL/Lo : ≤ ±10%
There shall be no
mechanical damage or
electrical damage
The sample shall be soldered onto the printed circuit board and a load applied
until the figure in the arrow direction is made approximately 3mm (keep time 5
±1 seconds).
THERMAL SHOCK
ΔL/Lo : ≤ ±10%
There shall be no damage
or problems.
The sample shall be subject to 5 continous cycles, such as shown in the
following temperature cycle. Measure the test items after leaving the inductors
at room temperature and humidity for 1 hour.
COMPONENT
ADHESION
(PUSH TEST)
10N Min (LPC 2410, 3010)
12N Min (LPC 3012, 3015,
4018, 4025, 5040, 6045)
The device should be reflow soldered (245 ±5ºC for 10 seconds) to a
copper substrate a dynamometer force gauge should be applied to the side
of the component the device must withstand a minimum force of 10N or 12N
without failure of the termination attached to the component.
www.johanson dielectrics.com
Power Inductors, Semi-Shielded (Coated)
LPC Series
SOLDERING INFORMATION
RECOMMENDED FOOTPRINT:
Size Codes
A
B
C
Units
2410
3010
3012
3015
4018
4025
5040
6045
In
0.031
0.031
0.031
0.031
0.059
0.059
0.059
0.063
mm
0.800
0.800
0.800
0.800
1.500
1.500
1.500
1.600
In
0.079
0.079
0.106
0.106
0.142
0.142
0.157
0.244
mm
2.000
2.000
2.700
2.700
3.600
3.600
4.000
5.700
In
0.098
0.098
0.087
0.087
0.179
0.179
0.201
0.248
mm
2.500
2.500
2.200
2.200
4.550
4.550
5.100
6.300
RECOMMENDED SOLDER ATTACHMENT: REFLOW SOLDERING
Reflow: 2 times max
Peak Temperature: 255ºC
Max Time Above 217ºC: 90 sec max
If hand soldering must be used, follow these precautions:
Use solder iron of less than 30W when soldering.
Do not allow soldering iron tip to directly touch the ferrite body outside of the terminal electrode.
2 seconds maximum at 280ºC.
* This datasheet is subject to change without notice
www.johanson dielectrics.com
65
PLANAR CAPACITOR ARRAYS FOR EMI FILTERING
Johanson Dielectrics is the premier supplier of Planar Capacitor
EMI Filter Arrays to the Filtered Connector Industry.
Planar Capacitors are the fundamental building block for filtered
connectors in Aerospace, Biomedical, Military, Satellite, Industrial and Communication electronics.
Johanson offers high value Arrays in standard and custom solutions to fit your needs.
CIRCULAR ARRAYS
PHYSICAL
LAYOUT
DIELECTRIC
MATERIAL
AVAILABLE
CAPACITANCE
WORKING
VOLTAGE
DWV
VOLTAGE
MIL-1560
MIL-1554
MIL-1669
MIL-1651
MIL-1698
MIL-33702
MIL-AUDIO
X7R
&
NP0
47 pF
to
800 nF
Up to
2,000
VDC
Up to
3,000
VDC
PHYSICAL
LAYOUT
DIELECTRIC
MATERIAL
AVAILABLE
CAPACITANCE
WORKING
VOLTAGE
DWV
VOLTAGE
RECTANGULAR ARRAYS (ARINC 404/600)
AR-010
X7R
47 pF
Up to
Up to
Through
&
to
1,330
2,000
AR-150
NP0
940 nF
VDC
VDC
PHYSICAL
LAYOUT
DIELECTRIC
MATERIAL
AVAILABLE
CAPACITANCE
WORKING
VOLTAGE
DWV
VOLTAGE
X7R
&
NP0
47pF - 210nF
47pF - 100nF
47pF - 22.5nF
47pF - 3.0nF
47pF - 6.0nF
47pF - 120nF
47pF - 50nF
≤ 2,400
≤ 1,000
≤ 680
≤ 200
≤ 800
≤ 680
≤ 300
≤ 3,600
≤ 1,500
≤ 1,020
≤ 500
≤ 1,200
≤ 1,020
≤ 750
D-SUBMINATURE RECTANGULAR ARRAYS
Full Size
Mini-D
Micro-D
Nano-D
Combo-D
Power-D
Special
66
www.johanson dielectrics.com
PLANAR CAPACITOR ARRAYS FOR EMI FILTERING
CUSTOM ARRAYS
Johanson Dielectrics’s design expertise and CNC manufacturing process enable broad custom array capability. Many shapes,
configurations and geometries are possible. Share your requirements and we will create a solution!
DISCOIDAL CAPACITORS
Johanson Discoidal Feed-through Capacitors are the functional element
in widely used EMI feed-through filters. This capacitor configuration offers very low impedance and inductance. Discoidal capacitors are ideal
for by-pass, filtering, coupling, single line EMI/RFI suppression, and high
frequency applications.
• Capacitance values from 10 pF to 11.2 μF
• Test standards and procedures per MIL-STD-202 and MIL-C-123
• Voltage ratings from 50 to 3000 VDC and 50 to 240 VAC
• Low ESR and ESL, non-polar designs
Call us to discuss your special requirements!
NOMINAL
O.D. (IN.)
0.100 ±.005
0.150 ±.005
0.335 ±.005
0.345 ±.005
0.376 ±.005
0.643 ±.005
0.840 ±.005
DIELECTRIC
MATERIAL
X7R
&
NP0
AVAILABLE
CAPACITANCE
INSIDE
DIAMETER (IN.)
THICKNESS (IN.)
RATED VOLTAGE
10 pF – 66 nF
10 pF – 200 nF
10 pF – 2.8 µF
10 pF – 6.0 µF
10 pF – 8.0 µF
10 pF – 15 µF
10 pF – 20 µF
0.025 ±0.048
0.037 ±0.058
0.034 ±0.088
0.040 ±0.085
0.050 ±0.075
0.063 ±0.080
0.050 ±0.075
0.025 ±0.070
0.025 ±0.070
0.040 ±0.110
0.055 ±0.110
0.065 ±0.125
0.055 ±0.150
0.080 ±0.130
Up to 200 VDC
Up to 200 VDC
Up to 500 VDC
Up to 750 VDC
Up to 750 VDC
Up to 750 VDC
Up to 1000 VDC
www.johanson dielectrics.com
67
CAPSTRATE CAPACITOR SUBSTRATES
®
Johanson CapStrate® products integrate bulk capacitance into a ceramic substrate eliminating large discrete
capacitive components which saves critical space and
simplifies the assembly process. Our design and manufacturing expertise in large format, custom geometries
provides innovative solutions that economically solve a
wide variety of your design challenges.
Discrete
Circuit
CapStrate
Circuit
ADVANTAGES
®
• Major Size & Weight Reduction
• Fewer Solder Joints
• Lower Assembly Cost
• Circuit Assembly Available
KEY FEATURES
• Integrated Capacitance in The Substrate
• Rated Working Voltages from 50V to 5,000V
• Temperature ranges: -55°C to 125°C (specials to 200°C and 250°C)
• Compact Designs Utilizing Military Grade Ceramics
• Custom Sizes, Values, and Voltages Available
SIZE / CAPACITANCE CAPABILITY EXAMPLES
SUBSTRATE SIZE
CapStrate 4
CapStrate 3
CapStrate 1
CapStrate 2
CapStrate 6
LENGTH
WIDTH
THICK
In
0.400
0.400
0.120
mm
10.2
10.2
3.1
In
0.450
1.00
0.120
mm
11.43
25.4
3.1
In
0.450
2.00
0.120
mm
11.4
50.8
3.1
In
0.800
1.50
0.120
mm
20.3
38.1
3.1
In
1.250
2.00
0.120
mm
31.8
50.8
3.1
Circular CapStrate® Capacitance Formula
NP0
50V
NP0
100V
NP0
200V
NP0
500V
X7R
50V
X7R
100V
X7R
200V
X7R
500V
0.22µF
0.15µF
0.12µF
0.07µF
9.0µF
6.0µF
3.0µF
1.5µF
0.70µF
0.50µF
0.39µF
0.22µF
28.0µF
20.0µF
9.0µF
4.7µF
1.40µF
1.00µF
0.75µF
0.44µF
50.0µF
40.0µF
18.0µF
9.4µF
2.00µF
1.40µF
1.00µF
0.60µF
75.0µF
55.0µF
25.0µF
14.0µF
4.00µF
2.80µF
2.00µF
1.20µF
150.0µF
110.0µF
50.0µF
28.0µF
1.3 -1.6
µF / In2
0.9 -1.1
µF / In2
0.7 -0.8 50 - 62 µF 35 - 45 µF 18 - 20 µF 1.3 -1.6
µF / In2
/ In2
/ In2
/ In2
µF / In2
9 -10
µF / In2
This chart is intended to provide capability examples. Not all possibilities are shown and we invite application specific inquiries. Circular
CapStrate® example lists available capacitance per area.
68
www.johanson dielectrics.com
CUSTOM CAPACITOR SOLUTIONS
Johanson’s extensive experience in design and
manufacture of large format, custom geometries allows us to develop unique and innovative
solutions which successfully solve a wide variety of our customer’s design challenges.
We’ll work pro actively with you to fully understand your requirements and recommend the
best solution possible.
KEY FEATURES
• Custom shapes to fit specific requirements
• Multiple capacitors in a single assembly
• NP0/COG and X7R solutions from -55°C to +125°C
• Multiple pin, lead-frame, and flying wire options
• Bare ceramic, epoxy coated, potted solutions
VARIABLE PITCH ASSEMBLIES
Another custom approach is our variable pitch
design. No longer are you limited to a vendor’s
standard catalogue offering or only square or
rectangular custom designs. We let you become your own capacitor designer by not only
telling us the desired capacitance and voltage,
but also the size, shape, and location of leads!
This process helps insure that the resulting
capacitor satisfies every aspect of your design
requirements.
ON-LINE PRODUCTS
200°C Radial Leaded Capacitors
Large Size MLC Capacitors
High Power AC Capacitors
www.johanson dielectrics.com
69
CAPACITOR PACKAGING
Johanson capacitors are available taped per EIA
standard 481. Tape options include 7” and 13”
diameter reels. Johanson uses high quality, dust free,
punched 8mm paper tape and plastic embossed 8mm
tape for thicker MLCCs. Quantity per reel ranges are
listed in the tables below and are dependent on chip
thickness.
Feed Direction
Embossed Tape
.083 max.
(2.1)
Punched Tape
8mm Width; 4mm or 2mm Pitch
.059+.004-0.0
(1.5+0.1-0.0)
.157±.004
(4.0±0.1)
Sproket Holes
.012±.004
(0.3±0.1)
.067±.004
(1.7±0.1)
.055
max.(1.2)
.138±.002
(3.5±0.05)
.079±.020
(2.0±0.5)
Width
.315±.008
(8.0±0.2)
Bo
Ao
.083±.020
(21±0.5)
4E
JV
00
Cover Tape
.510±.020
(13±0.5)
.079±.002
(2.0±0.05)
Pitch = .157±.004 (4.0±0.1)
or .079±.004 (2.0±0.1)
Cover Tape
0
0R
50
1
7N
N
P/
1.97 min.
(50.0)
Embossed Tape
99
99
0-
01
t#
Lo
56
34
.#
F0
.098 max.
(2.5)
78
.012±.004
(0.3±0.1)
12mm Width; 8mm or 4mm Pitch
.059+.004-0.0
(1.5+0.1-0.0)
Sproket Holes .157±.004
(4.0±0.1)
Punched Tape
.067±.004
(1.7±0.1)
26
S.O
O1
.#
M
.O
M
Ao
.220±.004
(5.5±0.1)
Bo
7.0±.079
13.0±.079
(178±2.0) or (330±2.0)
Pitch = .314±.004 (8.0±0.1)
or .157±.004 (4.0±0.1)
.33+.059-0.0 or .488+.078-0.0
(8.4+1.5-0.0)
(12.4+2.0-0.0)
7” DIAMETER REEL
COMPONENT
R05 / 0201 MLCC
R07 / 0402 MLCC
R14 / 0603 MLCC
R15 / 0805 MLCC
R18 / 1206 MLCC
S41 / 1210 MLCC
R29 / 1808 MLCC
R30 / 2211 MLCC
S43 / 1812 MLCC
S47 / 2220 MLCC
S49 / 1825 MLCC
S48 / 2225 MLCC
X07 / 0402 X2Y
X14 / 0603 X2Y
X15 / 0805 X2Y
X18 / 1206 X2Y
X41 / 1210 X2Y
X44 / 1410 X2Y
X43 / 1812 X2Y
.079±.002
(2.0±0.05)
13” DIAMETER REEL
REEL QTY
TAPE TYPE
WIDTH / PITCH
CODE
REEL QTY
TAPE TYPE
15000
10000
4000
4000 / 3000
4000 / 3000
2000 - 4000
2000
1000 - 2000
500 - 1000
250 - 1000
250 - 1000
250 - 1000
4000
4000
4000
3000 - 4000
2000 - 3000
1000 - 2000
1000
Paper
Paper
Paper
8mm/2mm
8mm/2mm
8mm/4mm
8mm/4mm
8mm/4mm
8mm/4mm
12mm/4mm
12mm/4mm
12mm/8mm
12mm/8mm
12mm/8mm
12mm/8mm
8mm/2mm
8mm/4mm
8mm/4mm
8mm/4mm
8mm/4mm
8mm/4mm
12mm/8mm
T
T
T
T/E
T/E
E
E
E
E
E
E
E
T
T
E
E
E
E
E
N/A
N/A
10000
10000
10000
5000-10000
5000 - 8000
2000 - 5000
3000 - 5000
2000 - 5000
2000 - 4000
2000 - 4000
10000
10000
10000
10000
N/A
N/A
Paper
Paper / Embossed
Paper / Embossed
Embossed
Embossed
Embossed
Embossed
Embossed
Embossed
Embossed
Paper
Paper
Embossed
Embossed
Embossed
Embossed
Embossed
Paper / Embossed
Paper / Embossed
Embossed
Embossed
Embossed
Embossed
Embossed
Embossed
Embossed
Paper
Paper
Embossed
Embossed
WIDTH / PITCH
CODE
8mm/4mm
8mm/4mm
8mm/4mm
8mm/4mm
12mm/4mm
12mm/4mm
12mm/8mm
12mm/8mm
12mm/8mm
12mm/8mm
8mm/2mm
8mm/4mm
8mm/4mm
8mm/4mm
N/A
N/A
R
R/U
R/U
U
U
U
U
U
U
U
R
R
U
U
Actual reel quantities based on part thickness and tape type. Contact sales for reel quantities of specific part numbers.
70
Width
.472±.008
(12.0±0.2)
www.johanson dielectrics.com
ELECTRICAL CHARACTERISTICS
PARAMETER
TEMPERATURE
COEFFICIENT:
NP0
X7R
0± 30 ppm/°C
-55 to +125°C
± 15%
-55 to +125°C
0%
0%
0%
-20%
-20%
-40%
-40%
-40%
-60%
-60%
-60%
-80%
-55°C
-80%
-55°C
-25°C
0°C
25°C
50°C
75°C
100°C
125°C
-25°C
0°C
25°C
50°C
75°C
100°C
0°C
25°C
50°C
75°C
100°C
125°C
For Vrated ≥ 50 VDC, DF = 5% max
For Vrated ≤ 25 VDC: DF = 10% max
None
2.5% / decade hour
2.5 % / decade hour
1000ΩF or 100GΩ
whichever is less @ 25°C, WVDC
500ΩF or 50GΩ
whichever is less @ 25°C, WVDC
100ΩF or 10GΩ
whichever is less @ 25°C, WVDC
For Vrated = 6 - 200 VDC, DWV = 2.5 X WVDC, 25°C, 50mA max.
For Vrated = 201 - 499 VDC, DWV = 2.0 X WVDC, 25°C, 50mA max.
For Vrated = 500 - 999 VDC, DWV = 1.5 X WVDC, 25°C, 50mA max.
For Vrated = 1000+ VDC, DWV = 1.2 X WVDC, 25°C, 50mA max.
TEST
PARAMETERS:
C > 100 pF; 1kHz ±50Hz;1.0±0.2
VRMS
1kHz ±50Hz;1.0±0.2 VRMS
C ≤ 100 pF 1Mhz ±50kHz; 1.0±0.2
VRMS
Tanceram IR = 100 ΩF or 10 GΩ
Tanceram DF for Vrated ≥ 50 VDC = 5% max.
Tanceram DF for Vrated ≤ 25 VDC, DF = 10% max
PART NUMBER BREAKDOWN - SURFACE MOUNT
VOLTAGE
-25°C
WVDC ≥ 50 VDC, DF = 2.5% max
WVDC = 25 VDC, DF = 3.0% max
WVDC = 16 VDC, DF = 3.5% max
DIELECTRIC
STRENGTH:
6R3 = 6.3 V DC
100 = 10 V DC
160 = 16 V DC
250 = 25 V DC
500 = 50 V DC
101 = 100 V DC
201 = 200 V DC
251 = 250 V DC
301 = 300 V DC
501 = 500 V DC
631 = 630 V DC
102 = 1000 V DC
202 = 2000 V DC
302 = 3000 V DC*
402 = 4000 V DC
502 = 5000 V DC*
ACJ = 250 VAC
* For Safety Caps
with -****-SC
P/N suffix only:
302 = 250VAC
[2500V Impulse]
502 = 250VAC
[5000V Impulse]
-80%
-55°C
125°C
.001 (0.1%) max
AGING:
502
-55 to +85°C
20%
-20%
DISSIPATION
FACTOR:
NOTES:
± 15%
20%
20%
INSULATION
RESISTANCE:
X5R
1kHz ±50Hz; 0.5±0.2 VRMS
Part number written: 502R29W102KV3E-****-SC
W
SERIES/SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
PACKING
N = NP0
W = X7R
X = X5R
1st two digits are
significant; third
digit denotes
number of zeros,
R = decimal.
* B = ± 0.10 pF
* C = ± 0.25 pF
* D = ± 0.50 pF
*F=±1%
* G = ± 2%
* J = ± 5%
* K = ± 10%
* M = ± 20%
* Y = +50 -20%
* Z = +80 -20%
V = Nickel Barrier
with 100% Tin
Plating (Matte)
3 = Special
4 = Unmarked
6 = EIA Code*
F = Polyterm
flexible termination
*Not available
on sizes
≤ 0402
E = Embossed 7”
T = Punched 7”
U = Embossed 13”
R = Punched 13”
=
=
=
=
=
=
=
ARRAY
LICC
F-T FILTER
MLCC
MLCC
HI TEMP MLCC
X2Y
5R6 = 5.6 pF
100 = 10 pF
102 = 1,000 pF
474 = 0.47 µF
475 = 4.7 µF
106 = 10 µF
_05=0201
_07=0402
_14=0603
_15=0805
_18=1206
_41=1210
_29=1808
_30=2211
_43=1812
_44=1410
_47=2220
_49=1825
_48=2225
K
3
R 29
A_ _
B_ _
F_ _
R_ _
S_ _
T_ _
X_ _
102
DWV = 2.5 X WVDC, 25°C, 50mA
max.
*Values < 10 pF
only
V
G = Gold
E
No code = bulk
pack
Tape specifications
conform to EIA
RS481
T = SnPb
P = PdAg
Not all tape styles
are available on all
parts.
-****- SC
PART NUMBER MODIFIER
Used on select parts such as Safety Certified or
for customer specific requirements.
PLEASE NOTE: Not all combinations of JDI P/Ns are valid. Please refer to the “How to Order” detail section of the specific product or contact
your Sales Representative if you need assistance.
www.johanson dielectrics.com
71
Power Inductors, Semi-Shielded (Coated) Packaging
LPC Series
REEL DIMENSIONS (Unit: mm)
7” DIA. REEL SIZE
SIZE
CODE
REEL
QTY
TAPE
TYPE
TAPE
CODE
2410
2000
Embossed
E
3010
2000
Embossed
E
3012
2000
Embossed
E
3015
2000
Embossed
E
13” DIA. REEL SIZE
SIZE
CODE
REEL
QTY
TAPE
TYPE
TAPE
CODE
4018
3000
Embossed
E
4025
3000
Embossed
E
5040
1000
Embossed
E
6045
1000
Embossed
E
TAPPING FIGURE
72
www.johanson dielectrics.com
Power Inductors, Semi-Shielded (Coated) Packaging
LPC Series
TAPE DIMENSIONS (Unit: mm)
Size Codes
A0
B0
K0
T
W
E
F
D
D1
P
P2
Po
10Po
2410
2.75
2.75
1.30
0.23
8.00
1.75
3.50
1.50
1.00
4.00
2.00
4.00
40.00
3010
3.30
3.30
1.40
0.23
8.00
1.75
3.50
1.50
1.00
4.00
2.00
4.00
40.00
3012
3.30
3.30
1.40
0.23
8.00
1.75
3.50
1.50
1.00
4.00
2.00
4.00
40.00
3015
3.30
3.30
1.70
0.23
8.00
1.75
3.50
1.50
1.00
4.00
2.00
4.00
40.00
4018
4.50
4.35
1.90
0.25
12.00
1.75
5.50
1.50
1.50
8.00
2.00
4.00
40.00
4025
4.20
4.20
2.75
0.30
12.00
1.75
5.50
1.50
1.50
8.00
2.00
4.00
40.00
5040
5.35
5.80
4.70
0.40
12.00
1.75
5.50
1.50
1.50
8.00
2.00
4.00
40.00
6045
6.30
6.30
4.70
0.40
16.00
1.75
7.50
1.50
1.50
12.00
2.00
4.00
40.00
PACKAGING FORM (Unit: mm)
Size Codes
A
B
C
2410
160
80
4
3010
160
80
8
3012
160
80
8
3015
160
80
8
4018
400
200
8
4025
400
200
8
5040
400
200
8
6045
400
200
12
www.johanson dielectrics.com
73
Your Technology Partner
High Voltage
AC Safety
EMI Filters (X2Y®) High Capacitance
High Temperature
AC Power
Precision Power
Resistors
Low ESL
SMPS
Radial Leaded
Planar Arrays
Custom Solutions
EUROPE:
UNITED STATES:
HONG KONG:
JOHANSON EUROPE, LTD.
Flackwell Heath,
Bucks, England HP10 9NR
TEL +44 1628 531154 • FAX +44 1628 532703
[email protected]
HEADQUARTERS
15191 Bledsoe St.,
Sylmar, California 91342
TEL (818) 364 9800 • FAX (818) 364 6100
http://www.johansondielectrics.com
JOHANSON HONG KONG, LTD.
Unit E, 11/F., Phase 1 Kaiser Estate
41 Man Yue St., Hunghom
Kowloon, Hong Kong
TEL +852 2334 6310 • FAX +852 2334 8858
[email protected]
© 2016 Publication JD1052616
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement