Polar Electro | Transmitter Nike+ | User manual | Polar Electro Transmitter Nike+ User manual

POLAR WEARLINK+
TRANSMITTER NIKE+
User Manual
ENGLISH
Polar WearLink® Transmitter Nike+
This user manual contains instructions for the
Polar WearLink transmitter Nike+. The heart
rate sensor is compatible with Nike + iPod,
Nike+ SportBand and Polar training computers
using GymLink technology, such as FT80,
FT60, RS300X, and CS400. For detailed list of
compatible products, go to www.polar.com.
The latest version of this user manual can be
downloaded at www.polar.com/support. For
video tutorials, go to
www.polar.com/support/video_tutorials.
Register your Polar product at
http://register.polar.fi to ensure we can keep
improving our products and services to better
meet your needs.
Please follow the pictures on the front cover.
Heart Rate Sensor Parts
1.
2.
The plastic electrode areas on the reverse
side of the strap detect heart rate. Picture
A1.
The connector sends the heart rate signal
to the receiving device. Picture A2.
WearLink heart rate sensors enable training in a
group without interference from other heart rate
sensors.
Wear the Heart Rate Sensor
1.
2.
3.
Moisten the electrode areas of the strap.
Picture B1.
Attach the connector to the strap. Picture
B2.
Adjust the strap length to fit tightly but
comfortably.
1
4.
5.
Tie the strap around your chest, just below
the chest muscles, and attach the hook to
the other end of the strap. Picture B3.
Check that the moist electrode areas are
firmly against your skin and that the Polar
logo of the connector is in a central and
upright position. Picture B4.
Detach the connector from the strap and rinse
the strap under running water after every use.
See detailed washing instructions in the Caring
for Your Heart Rate Sensor section.
Linking the Heart Rate Sensor with Nike +
iPod
Nike + iPod -compatible heart rate sensors are
sold separately from the Nike + iPod Sport Kit
and the Nike + iPod sensor. Nike + iPod
compatible heart rate sensors can be used with
iPod nano (5th generation or newer).
Before using the heart rate sensor for the first
time, you must link it to your iPod nano
receiver:
•
iPod nano (5th generation or newer):
Connect your Nike + iPod receiver to your
iPod nano, choose Nike + iPod > Settings >
Heart Rate Monitor > Link, and follow the
on-screen instructions.
Unlinking the heart rate sensor:
•
iPod nano: Choose Nike + iPod > Settings >
Heart Rate Monitor > Unlink, and follow the
on-screen instructions.
Linking the Heart Rate Sensor with Nike+
SportBand
Nike+ SportBand -compatible heart rate sensors
are sold separately from the Nike SportBand.
Before using the heart rate sensor for the first
time, you must link it to your Nike+ SportBand:
2
ENGLISH
1.
Wear the heart rate sensor. Make sure there
are no other shoe sensors or heart rate
sensors nearby.
2.
Press and hold the TOGGLE button on the
Nike SportBand for 3 seconds. A blinking
Link message appears on the SportBand
display, followed by OK.
For more information on the Nike+ SportBand,
see the complete manual available at
www.nikeplus.com/downloads .
Caring for Your Heart Rate Sensor
The heart rate sensor is a high-tech instrument
that should be handled with care. Follow the
caring instructions to ensure reliable
measurement and to maximize the life span of
the heart rate sensor. The following instructions
will help you fulfill guarantee obligations.
Connector: Detach the connector from the strap
after every use and dry the connector with a soft
towel. Clean the connector with a mild soap and
water solution when needed. Never use alcohol
or any abrasive material (eg. steel wool or
cleaning chemicals).
Strap: Rinse the strap under running water after
every use and hang to dry. Clean the strap
gently with a mild soap and water solution when
needed. Do not use moisturizing soaps, because
they can leave residue on the strap. Do not
soak, iron, dry clean or bleach the strap. Do not
stretch the strap or bend the electrode areas
sharply.
Dry and store the strap and the connector
separately, to maximize the heart rate sensor
battery lifetime. Keep the heart rate sensor in
a cool and dry place. Do not store the heart rate
sensor wet in non-breathing material, such as a
sports bag, to prevent snap oxidation. Do not
expose the heart rate sensor to direct sunlight
for extended periods.
ENGLISH
3
Check the label on your strap to see if it is
machine washable. Never put the strap or the
connector in a dryer!
Service
During the warranty period, service the product
at an authorized Polar Service Center only. The
warranty does not cover damage caused by
unauthorized service. See Limited International
Polar Guarantee.
Batteries
To change the battery yourself, follow the
instructions below, and see the markings on the
connector and picture C on the front cover of
this user manual.
1.
2.
3.
4.
Using a coin, open the battery cover by
turning it counterclockwise to OPEN.
Insert the battery (CR 2025) inside the
cover with the positive (+) side against the
cover. Make sure the sealing ring is in the
groove to ensure water resistance.
Press the cover back into the connector.
Use the coin to turn the cover clockwise to
CLOSE.
When changing the battery, make sure the
sealing ring is not damaged, in which case you
should replace it with a new one to ensure the
water resistance of the connector.
Battery kits with sealing rings are available at
Polar retailers and authorized Polar Service
Centers. In the USA and Canada, sealing rings
are available at authorized Polar Service Centers
only.
Keep batteries away from children. If
swallowed, contact a doctor immediately.
Batteries should be disposed of in compliance
with local regulations.
4
ENGLISH
Precautions
For allergy information, see the listed materials
in Technical Specifications. Avoid skin
reactions by wearing the heart rate sensor over a
shirt, moistened under the electrodes.
The combined impact of moisture and intense
abrasion may cause a black color to come off
the heart rate sensor’s surface, possibly
staining light-colored clothes. If you use
perfume or insect repellent on your skin, you
must ensure that it does not come into
contact with the heart rate sensor.
Using Your Heart Rate Sensor in a Water Environment
Polar WearLink transmitter Nike+ may be used
when swimming, but interference may occur for
the following reasons:
• Sea- and pool water are very conductive, and
electrodes may short-circuit, preventing ECG
signals from being detected by the heart rate
sensor.
• Jumping or sharp muscle movement may
shift the heart rate sensor so the ECG signals
cannot be detected.
• The ECG signal strength is individual and
depends on tissue composition.
Technical Specifications
Battery type:
Battery sealing ring:
WearLink Nike+
battery life:
Operating
temperature:
Connector material
Strap material
CR 2025
O-ring 20.0 x 1.0 Material FPM
600 h
14 °F to 122 °F/ -10 °C to +50 C
Polyamide
38% Polyamide, 29%
Polyurethane, 20% Elastane,
13% Polyester
ENGLISH
5
Limited International Polar Guarantee
•
This guarantee does not affect the
consumer’s statutory rights under applicable
national or state laws in force, or the
consumer’s rights against the dealer arising
from their sales/purchase contract.
• This limited Polar international guarantee is
issued by Polar Electro Inc. for consumers
who have purchased this product in the USA
or Canada. This limited Polar international
guarantee is issued by Polar Electro Oy for
consumers who have purchased this product
in other countries.
• Polar Electro Oy/Polar Electro Inc.
guarantees the original consumer/purchaser
of this device that the product will be free
from defects in material or workmanship for
two (2) years from the date of purchase.
• The receipt of the original purchase is your
proof of purchase!
•
The guarantee does not cover the battery,
normal wear and tear, damage due to
misuse, abuse, accidents or non-compliance
with the precautions; improper maintenance,
commercial use, cracked, broken or
scratched cases/displays, armband, elastic
strap and Polar apparel.
• The guarantee does not cover any damage/s,
losses, costs or expenses, direct, indirect or
incidental, consequential or special, arising
out of, or related to the product.
• Items purchased second hand are not
covered by the two (2) year warranty, unless
otherwise stipulated by local law.
• During the guarantee period, the product will
be either repaired or replaced at any of the
authorized Polar Service Centers regardless
of the country of purchase.
Guarantee with respect to any product will be
limited to countries where the product has been
initially marketed.
6
ENGLISH
This product is compliant with the Directives
93/42/EEC, 1999/5/EC and 2011/65/EU. The
relevant Declaration of Conformity is available
at www.support.polar.com
/declaration_of_conformity.html.
Regulatory information is available at
www.polar.com/support.
Compliance Statement
Canada
Polar Electro Oy has not approved any changes or
modifications to this device by the user. Any changes or
modifications could void the user’s authority to operate
the equipment.
Polar Electro Oy n’a approué aucune modification
apportée à l’appareil par l’utilisateur, quelle qu’en soit
la nature. Tout changement ou toute modification
peuvent annuler le droit d’utilisation de l’appareil par
l’utilisateur.
Industry Canada (IC) regulatory information
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a type
and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any
interference, including interference that may cause
undesired operation of the device.
ENGLISH
7
Avis de conformité à la réglementation d’Industrie
Canada
Conformément à la réglementation d'Industrie Canada,
le présent émetteur radio peut fonctionner avec une
antenne d'un type et d'un gain maximal (ou inférieur)
approuvé pour l'émetteur par Industrie Canada. Dans le
but de réduire les risques de brouillage radioélectrique
à l'intention des autres utilisateurs, il faut choisir le
type d'antenne et son gain de sorte que la puissance
isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensité nécessaire à l'établissement d'une
communication satisfaisante.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le
fonctionnement.
Class B digital device notice
This Class B digital apparatus complies with Canadian
ICES-003, RSS-Gen and RSS-210.
Cet appareil numérique de la classe B est conforme à
la norme NMB-003, CNR-Gen et CNR-210 du Canada.
USA
Polar Electro Oy has not approved any changes or
modifications to this device by the user. Any changes or
modifications could void the user’s authority to operate
the equipment.
FCC regulatory information
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
8
ENGLISH
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
1.
2.
3.
4.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/ TV
technician for help.
This product emits radio frequency energy, but the
radiated output power of this device is far below the
FCC radio frequency exposure limits. This equipment
complies with FCC RF radiation exposure limits forth
for an uncontrolled environment. Nevertheless, the
device should be used in such a manner that the
potential for human contact with the antenna during
normal operation is minimized.
ENGLISH
9
This crossed out wheeled bin marking shows
that Polar products are electronic devices and
are in the scope of Directive 2002/96/EC of the
European Parliament and of the Council on
waste electrical and electronic equipment
(WEEE) and batteries and accumulators used in
products are in the scope of Directive
2006/66/EC of the European Parliament and of
the Council of 6 September 2006 on batteries
and accumulators and waste batteries and
accumulators. These products and
batteries/accumulators inside Polar products
should thus be disposed of separately in EU
countries.
This marking shows that the product is
protected against electric shocks.
Copyright 2013 Polar Electro Oy, FI-90440
KEMPELE.
Polar Electro Oy is a ISO 9001:2008 certified
company.
All rights reserved. No part of this manual may
be used or reproduced in any form or by any
means without prior written permission of Polar
Electro Oy. The names and logos marked with a
™ symbol in this user manual or in the package
of this product are trademarks of Polar Electro
Oy. The names and logos marked with a ®
symbol in this user's manual or in the package
of this product are registered trademarks of
Polar Electro Oy.
10
ENGLISH
Disclaimer
The material in this manual is for informational
purposes only. The products it describes are
subject to change without prior notice, due to
the manufacturer’s continuous development
program.
Polar Electro Inc. / Polar Electro Oy makes no
representations or warranties with respect to
this manual or with respect to the products
described herein.
Polar Electro Inc. / Polar Electro Oy shall not be
liable for any damages, losses, costs or
expenses, direct, indirect or incidental,
consequential or special, arising out of, or
related to the use of this material or the
products described herein.
This product is protected by one or several of
the following patents: FI110915, US7324841,
EP1362829, FI23471, FI96380, US5611346,
EP0665947, JP3568954, FI115084,
US7418237, EP1543769, US D492783S, US
D492784S, US D492999S,
EU00046107-0001, EU00046107-0002,
EU00046107-0003. Other patents pending.
www.polar.com
ENGLISH
11
Manufactured by
Polar Electro Oy
Professorintie 5
FIN-90440 KEMPELE
Tel +358 8 5202 100
Fax +358 8 5202 300
www.polar.com
Download PDF

advertising