Vizio | VSB211 | User manual | Vizio VSB211 User manual

MODEL
VSB211
VIZIO
QUICK
START
GUIDE
IMPORTANT SAFETY INFORMATION
Your Sound Bar is designed and manufactured to operate within defined design limits, and misuse may result in
electric shock or fire. To prevent your Sound Bar from being damaged, the following rules should be observed
for its installation, use, and maintenance. Please read the following safety instructions before operating your
Sound Bar. Keep these instructions in a safe place for future reference. Please heed all warnings and follow
all instructions.
• To reduce the risk of electric shock or component damage, switch off the power before connecting other components
to your Sound Bar.
• When moving your Sound Bar from an area of low temperature to an area of high temperature, condensation may
form in the housing. Wait before turning on your Sound Bar to avoid causing fire, electric shock, or component damage.
• Never push any object into the slots and openings on your Sound Bar enclosure. Do not place any objects on the top of
your Sound Bar. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your Sound Bar.
• Your Sound Bar should be operated only from the type of power source indicated on the label on the AC/DC Adapters. If
you are not sure of the type of power supplied to your home, consult your dealer or local power company.
• Only power of the marked voltage can be used for your Sound Bar. Any other voltage than the specified voltage may
cause fire or electric shock
• The power cord must be replaced when using different voltage than the voltage specified. For more information,
contact your dealer.
• Do not defeat the safety purpose of the grounded plug.
• When connected to a power outlet, power is always flowing into your Sound Bar. To totally disconnect power, unplug
the power cord.
• The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert
the user to the presence of un-isolated, dangerous voltage within your Sound Bar that may be
of sufficient magnitude to constitute a risk of electric shock to persons.
• The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and servicing instructions in the literature accompanying your
Sound Bar.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• The wall socket should be located near your Sound Bar and be easily accessible
• Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical
storms.
• Do not attempt to repair or service Sound Bar yourself. Opening or removing the front cover may expose you to high
voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualified
service personnel.
• Keep your Sound Bar away from moisture. Do not expose your Sound Bar to rain or moisture. If water penetrates
into your Sound Bar, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or
electric shock.
• Do not use your Sound Bar if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord
and contact your dealer immediately. Do not try to repair your Sound Bar yourself.
• Avoid using dropped or damaged appliances. If your Sound Bar is dropped and the housing is damaged, the internal
components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued
use of your Sound Bar may cause fire or electric shock.
• Do not install your Sound Bar in an area with heavy dust or high humidity. Operating your Sound Bar in environments
with heavy dust or high humidity may cause fire or electric shock.
• Ensure that the power cord and any other cables are unplugged before moving your Sound Bar.
• When unplugging your Sound Bar, hold the power plug, not the cord. Pulling on the power cord may damage the wires
inside the cord and cause fire or electric shock. When your Sound Bar will not be used for an extended period of time,
unplug the power cord.
• To reduce risk of electric shock, do not touch the connector with wet hands.
• Insert the remote control battery in accordance with instructions. Incorrect polarity may cause the battery to leak which
can damage the remote control or injure the operator.
• If any of the following occurs, contact the dealer:
- The power cord fails or frays
- Liquid sprays or any object drops into your Sound Bar
- Sound Bar is exposed to rain or other moisture
- Sound Bar is dropped or damaged in any way
- The performance of your Sound Bar changes
substantially
• Keep your Sound Bar away from moisture. Do not expose your Sound Bar to rain or moisture. If water penetrates
into your Sound Bar, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or
electric shock.
• Unplug the power cord before cleaning your Sound Bar. Clean only with dry cloth. Do not use a liquid or a spray cleaner
on your Sound Bar. Do not use abrasive cleaners.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of
your Sound Bar and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your
Sound Bar in a bookcase or cabinet unless proper ventilation is provided.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
• Your Sound Bar AC/DC Adapters are equipped with a three-pronged grounded plug (a plug with a third grounding pin).
This plug will fit only into a grounded power outlet. This is a safety feature. If your outlet does not accommodate the
three-pronged, have an electrician install the correct outlet, or use an adapter to ground your Sound Bar safely.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When
a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personal. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
• The Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall
be placed on the apparatus.
• The main plug is used as the disconnect device, the disconnect device shall remain readily operable.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
PACKAGE CONTENTS
32” Home Theater Sound Bar
Power Adapter
Subwoofer Cable
Stereo RCA to 3.5mm
Audio Cable
This Quick Start Guide
Subwoofer
Remote Control with Battery
Included cables may vary slightly in appearance from those shown.
CONTROLS & CONNECTIONS
Power
Press to turn Sound Bar
on or off.
Volume Up
Press to increase
system volume.
TOP
Input
Vol -
Vol +
Input
Press to change input
source (Input 1, Input 2).
Volume Down
Press to decrease
system volume.
Sub Out
Input 1
Input 2
BACK
Power Port
Sub Out
Input 1
(Stereo RCA)
Input 2
(3.5mm Stereo)
FIRST-TIME SETUP
1
Sub Out
Input 1
Input 2
BACK OF SOUND BAR
Connect the included Stereo RCA
to 3.5mm Cable to ONE TV audio
output as shown.
CHOOSE ONE
AUDIO OUT
AUDIO OUT
BACK OF YOUR TV*
*Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc) see your device’s user manual.
2
Sub Out
Input 1
BACK OF SOUND BAR
Connect the included Subwoofer
Cable to the subwoofer as shown.
Input 2
3
Sub Out
Inp
Sub Out
4
Input 1
Input 2
5
6
Gently pull the plastic tab from the back
of the remote control. (The plastic tab
can be thrown away.)
7
Turn your TV on, then press the Power button on
the remote to turn the Sound Bar on.
Press the Input button to switch between the
Input 1 and Input 2 audio sources. For example,
if you connected your TV to Input 1, set the
Sound Bar to Input 1.
Setup is complete.
Power
Input
PLACING THE SUBWOOFER
For the best sound, place the Subwoofer
in a corner of the room.
WALL MOUNTING THE SOUND BAR
1
Remove the screw from the Sound
Bar stands and rotate as shown.
22 11/16”
(58.26 cm)
2
Be sure your screws are attached to wood
studs or drywall anchors (for drywall) or
concrete anchors (for brick/concrete walls).
If you are unfamiliar with power tools or the layout of electrical wiring in
the walls of your home, consult a professional installer.
Reattach stands using the
included screw.
USING THE REMOTE
Power
Press to turn on or off.
Input
Press to change input source.
Volume Up
Press to increase volume.
Volume Down
Press to decrease volume.
Mute
Press to mute/unmute.
SRS On/Off
Press to turn SRS WOW HD on.
When SRS WOW HD is activated, the
orange light on the front of the Sound Bar
is on.
SRS WOW HD improves audio
performance by expanding the audio
image, resulting in deep, rich bass and
added clarity.
SUB +
Press to increase subwoofer volume.
SUB Press to decrease subwoofer volume.
When using the remote, point it at the
right side of the Sound Bar. The sensor is
located there.
If your remote stops responding, you may need
to replace the battery.
To replace the battery, open the battery
compartment as shown, then replace the old
battery with a new CR2025. Be sure that the +
sign on the battery is facing up.
6
HELP & TROUBLESHOOTING
There is no power.
• Press the POWER button on the remote control or on the top of your Sound Bar.
• Ensure the power cord is securely connected.
• Ensure the light on the power adapter is glowing green.
• Plug a different device into the electrical outlet to verify that the outlet is working correctly.
There is no sound.
• Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar.
• Press MUTE on the remote to ensure the Sound Bar is not muted.
• Press INPUT on the remote or on the top of your Sound Bar to select a different input source.
• If you are using the 3.5mm output from your TV, be sure that is connected to an audio OUTPUT and
not audio INPUT. Some TVs use 3.5mm audio INPUT for devices such as computers.
• Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or
STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information.
I hear buzzing or
humming.
• Ensure all cables and wires are securely connected.
• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not,
the problem may be with the original device.
• Connect your device to a different input on the Sound Bar.
There is no bass.
• Press the SUB + button on the remote control to increase the bass level.
• Ensure the subwoofer cable is securely connected to the Subwoofer and to the Sound Bar.
There is too
much bass.
• Press the SUB - button on the remote control to decrease the bass level.
LET US HELP!
YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT
The VIZIO support team is highly trained
and is based in the United States.
We can help with:
•
•
•
•
Product Setup
Technical Problems
Warranty Questions
And More
Phone: (877) 878-4946 (TOLL-FREE)
Email: techsupport@VIZIO.com
Web: www.VIZIO.com/support
Hours of operation: Monday - Friday: 5 AM TO 9 PM (PST)
Saturday - Sunday: 8 AM TO 4 PM (PST)
We speak English • Se habla Español • Nous parlons Français
ONE-YEAR LIMITED WARRANTY
ON PARTS AND LABOR
Covers units purchased as new in United States and Puerto Rico Only
VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of
commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.
To obtain warranty service, contact VIZIO Technical Support via email: TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877.698.4946) from 6:00AM to 9:00PM Monday through Friday and
8:00AM to 4:00PM Saturday and Sunday, Pacific Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER. Proof of
purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period.
Parts and Labor
There will be no charge for parts or labor during the warranty period. Replacement parts and Products may be new or recertified at VIZIO’s option and sole discretion. Replacement parts and Products
are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping to the
customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection. VIZIO Technical Support will provide
instructions for packing and shipping the covered Product to the VIZIO service center.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper operation, improper
voltage supply or power surges, signal issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as well as installation and set-up issues or any repairs
attempted by anyone other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring routine maintenance are not covered. This one year limited
warranty does not cover Products sold “AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL
LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE
DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR
DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG
AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
CHECK www.VIZIO.com FOR THE MOST CURRENT VERSION.
SPECIFICATIONS
Sound Bar: Four 2.75” High-Efficiency
Hand-Built Full Range Transducers
Inputs: 1 x 3.5mm Audio
1 x RCA Stereo Audio
Sound Pressure Level: 90 dB
Frequency Response: 90Hz - 19 KHz
Voltage:
Dimensions
(Sound Bar):
Dimensions
(Subwoofer):
100-240 VAC, 50-60 Hz
31.50” x 4.00” x 3.65” (with stand)
31.50” x 3.25” x 3.65” (w/o stand)
8.13” x 10.50” x 9.56”
LEGAL & COMPLIANCE
FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Notice:
1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such
interference.
RF Exposure Information
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency
(RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
IC Statement
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
Disposal and Recycling
You must dispose of this product properly, according to local laws and regulations. Because this product contains electronic components and a battery, it must be disposed of
separately from household waste. Contact local authorities to learn about disposal and recycling options.
Incorporated under license from SRS Labs, Inc.
SRS WOW HD is a trademark of SRS Labs, Inc.
© 2012 VIZIO INC. ALL RIGHTS RESERVED.
120426OC-B
Download PDF

advertising