Escene | WS620 | User manual | Escene WS620 User manual

1
2xx Series IP Phone
User Manual
(firmware :V1.0.7.4)
Escene Communication Co.Ltd
www.escene.cn/en/
Escene Communication
2
Tables of Contents
1.Getting Started ............................................................................................................................... 4
About......................................................................................................................................... 4
Feature Highlights:.................................................................................................................... 4
Technical Features..................................................................................................................... 4
2.Connecting Your Phone.................................................................................................................. 7
3.Phone overview .............................................................................................................................. 8
Understanding Buttons and Hardware ...................................................................................... 8
Understanding Phone Screen Features .................................................................................... 10
4.Basic Call Handling ..................................................................................................................... 11
Placing a Call .......................................................................................................................... 11
Answering a Call..................................................................................................................... 12
Ending a Call........................................................................................................................... 12
Using Hold and Resume (Switch Calling Line) ...................................................................... 13
Transfer Calls .......................................................................................................................... 13
Using Mute.............................................................................................................................. 13
Do Not Disturb ........................................................................................................................ 13
3-way Conference ................................................................................................................... 14
5.Advanced Call Handling .............................................................................................................. 15
Using the Phone Book............................................................................................................. 15
Using Call Logs ...................................................................................................................... 17
6.Keypad Instruction ....................................................................................................................... 18
SIP Account Settings ............................................................................................................... 18
Network Setting ...................................................................................................................... 19
Customizing Rings and Volume .............................................................................................. 20
WIFI setting(only WS220N has this item) .............................................................................. 20
View status .............................................................................................................................. 21
Diagnose ................................................................................................................................. 21
7.Web Settings ................................................................................................................................ 23
Config Guide ........................................................................................................................... 23
WIFI Setting(only WS 220N has this item ) ........................................................................... 26
WIFI Status(only WS 220N has this item ) ............................................................................. 27
Network................................................................................................................................... 27
Sip Account ............................................................................................................................. 31
Programmable Keys ................................................................................................................ 34
Audio....................................................................................................................................... 35
Phone Book ............................................................................................................................. 36
Group .............................................................................................................................. 36
Contact ............................................................................................................................ 37
LDAP .............................................................................................................................. 38
BanList ............................................................................................................................ 39
Enterprise Phonebook ..................................................................................................... 40
Advance .................................................................................................................................. 40
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
3
Phone Setting .................................................................................................................. 40
VLAN Setting ................................................................................................................. 44
VPN Setting .................................................................................................................... 45
Dial Plan setting .............................................................................................................. 45
IP Strategy ....................................................................................................................... 46
Global SIP ....................................................................................................................... 47
Phone Maintenance ................................................................................................................. 47
Log .................................................................................................................................. 47
Default Setting ................................................................................................................ 48
Auto Provision ................................................................................................................ 49
TR069 ............................................................................................................................. 51
FTP Upgrade ................................................................................................................... 51
TFTP Upgrade ................................................................................................................. 52
HTTP Upgrade ................................................................................................................ 53
Reboot ............................................................................................................................. 54
Phone Status ............................................................................................................................ 55
System Info ............................................................................................................................. 55
About....................................................................................................................................... 56
8.Appendix .................................................................................................................................. 57
Auto Provision ........................................................................................................................ 57
1.Bulid TFTP/HTTP/HTTPS/FTP Server ....................................................................... 57
2. Place the configure file/software/kernel in Server ...................................................... 57
3.Configure parameters in Auto Provision Web page ..................................................... 62
:
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
4
2xx Series IP Phone
1.Getting Started
About
2xx Series is next-generation 2-line SIP phone, dual 10/100Mbps auto-sensing Ethernet port with
integrated PoE. The 2xx SERIES offers excellent voice clarity, call transfer, multi-party
conferences, voice mail, Do Not Disturb and Headset etc.
Feature Highlights:
HD Voice: HD Codec
Support unified maintenance and auto upgrade
Enterprise Phone Book
Support Headset interface
Support PoE and AC power adapter
Support HTTP/TFTP/FTP Auto-provision/TR069 for upgrade software
Technical Features
Item
Screen
Language
Line
2xx Series
grayscale LCD with background light
128*32 LCD, 4 display, 2.1 inch
Multi-Language (e.g.CN/EN/Spain/Portugal/Poland/Turkey/French/Italy etc.)
2 ,Light status: Coming call & Hold(Red flashing);Talking (Red)
Function Keys
4Navigation keys (arrow button, OK button, C button)
Volume button (multiplex up and down keys)
Hands-free
Headset
Message
Menu
Hold
Redial
Conference
Transfer
VoIP Protocol
SIP 2.0
Network Protocol
Codec
QoS
HTTP, BOOTP, FTP, TFTP, IEEE 802.1Q, *IEEE 802.1X
PCMA,PCMU, G.722 ,G.729 A,G.723.1(5.3Kb/s, 6.4Kb/s),iLBC
TOS, Jiffer Buffer, VAD, CNG, G.168 (32ms)
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
5
2xx Series IP Phone
Network
Voice
Function APP
2×RJ45 10/100M Ethernet Interfaces (LAN/PC)
IP Assignment: static IP, DHCP, PPPoE
PC port support Bridge and Router
DNS SRV,STUN, VPN(L2TP), VLAN/QoS
STUN,DTMF(In-band/RFC2833/SIP INFO)
Hands-free model available by Full-duplex
Separated 9 Level Volume Adjustment
Always Forward, Busy Forward, No-answer Forward
Hotline line (Immediately/Delay)
Call Waiting, Call Queuing
Call Forward, Call Transfer, Call Holding, Call Pickup, *Callback
Redial
Phone directory speed dial, Call record direct dial
3-way conference
DnD, Blacklist, SMS
Voice mail, Voice Prompt, Voice Message
P2P(Peer-to-Peer)
PBX
Call Transfer, Call Pick-Up, Network-Meeting, DND, Call Waiting, Call Hold.
Call Barring, Call Back On Busy, Anonymous Call ,Intercom, Paging
Application
LDAP
Enterprise phone directory, download with server, and it support 800 contacts
Public phone directory
XML Phonebook : Search /Input/ Out put
Private phone directory: input/output 300 contacts, every contact can save 3
numbers and the size of number is 19 byte.
Call History(600): every records is 200 with Miss Calls /Received
Calls/Dialed Calls.
Voice Message, Voice Mail Box, Light of Message.
Ringing Update, Input, Del,
*we also support to order the other APP.
Security
Login the website by password
Login the LCD by password
Signaling encryption(RC4)
Media encryption(RC4)
VPN, 802.1X, VLAN QoS(802.1pq), *LLDP
TLS, MD5,AES, ROOT/USER Management
Management
Upgrade: HTTP/TFTP/FTP Auto-provision/TR069
Configurations: Phone/Http/Auto provision/TR069
Debug: Telnet/Phone/Web
Keyboard Setting
Power Supply
Power adapter:AC100~240V input and DC 5V/1A output
PoE(IEEE 802.af)
Specification
DSPG Chipset
Storage Temperature: 0
℃ ~ 60℃
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
6
2xx Series IP Phone
Operating Humidity: 10%~90%
Size:206mm*166mm*59mm
Net weight: 1.07kg
Certifications
、 、
、
、
、
、
、
、
CE FCC RoHS Avaya Broadsoft Alcatel Yeastar Digium Metaswitch
etc.
Note: “*” Sign means function has not been published yet.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
7
2xx Series IP Phone
2.Connecting Your Phone
Your system administrator will likely connect your new 2xx Series IP Phone to the corporate IP
telephony network. If that is not the case, refer to the graphic and table below to connect your
phone.
1) Open the box of 2xx SERIES IP Phone carefully check the packing list as follow:
,
Item
Counts
IP Phone
1
Handset
1
Handset Cord
1
Power adapter
1 (Phone with PoE without Power adapter)
RJ45 cable
1
Quick Guide
1
Product certification
1
,
;
2) As shown in figure 2.1 RJ45 cable into the LAN interface IP Phone will automatically
start if IP Phone with POE function.
3) The phone must work together with power adapter without POE support.
4) If you want connect your computer into LAN at the same time, please connect your
computer to PC interface of the phone with a RJ45 cable.
Figure2.1 Interfaces of 2xx Series
www.escene.hk
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
8
2xx Series IP Phone
3.Phone overview
Understanding Buttons and Hardware
ou can identify buttons and hardware on your 2xx Series from figure 3.1.
Figure 3.1 2xx Series
Item
Description
1
Message button: Auto-dials your voice message service.
2
SIP line with VOIP or PSTN.
3
Headset button: Toggles the headset on or off.
When the headset is on, the light is red
4
MENU
5
0-9
,*,#
.
Menu button: Allows you to scroll through menus.
Basic Call Handling: press “#” send out a call by default.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
9
6
2xx Series IP Phone
Navigation
Allows you to scroll through menus and highlight items. When the
button
phone is on-hook, it becomes a shortcut key as follow:
,
“Up”: Adjust ring volume operate with the “down” button
“Down”: Open “Missed Calls” list:
“Left”: Open “Received Calls” list;
“Right”: Open “Dialed Numbers” list.
7
OK
OK button: To confirm the action.
8
C
Back button: Return to the standby interface.
9
CONFERENCE
Conference button: Connect calling / called party to the conference.
10
TRANSFER
Transfer button Transfer redirects a connected call.
11
HOLD
Hold button: Put a call on hold.
12
REDIAL
Redial button: To dial the last number.
13
Speaker button
Speaker button: Toggles the speakerphone on or off.
:
Red, steady: Pick up and enter normal call.
14
Speaker
15
Handset
16
Handset cord
17
LCD screen
18
Light strip
Sounds output when hands-free.
Use to sounds in/output.
Connects between handset and phone.
128*32 characters, grayscale LCD with background light.
Red flashing: There are incoming call;
Red, steady: Missed Calls, or phone busy;
19
Hands-free
Sounds input when hands-free
microphone
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
10
2xx Series IP Phone
Understanding Phone Screen Features
This is what your main phone screen might look like:
Figure 3.3 2xx Series Phone LCD
③
2
○
1
○
Screen displays
1
Date
Functions
(
,
(
,
Show current date You can set with different sources the more
7. Web Setting)
2
Time
Show current time You can set with different sources the more
7. Web Setting)
3
Line status
Show the phone line status:
1)
: Disconnect into network.
2)
: Only Peer-to-Peer call.
3)
: Network connected normal, but the line is not
successfully registered.
4)
: Network is OK and the line is available.
5)
: Line is turned on DND.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
11
2xx Series IP Phone
4.Basic Call Handling
You can perform basic call-handling tasks using a range of features and services. Feature
availability can vary; see your system administrator for more information.
Note: The bold type of the following text in table signifies the phone's button.
Placing a Call
Here are some easy ways to place a call on SayHi IP Phone:
If you want to...
Place a call using
Then…
Pick up the handset
the handset
Place a call using
Press Speaker button
--1) You can hear dial tone;
--2) Enter a number
--3) Press # button (default)
-or wait 5s (default), then it send the
number automatically.
;
,
a speakerphone
Place a call using
Put
on
your
headset,
a headset
active Headset button so
that the status light is
Red
, and then do as
using speakerphone
Redial
--Press REDIAL button to dial the last number,
-or press Navigation button-Right (in Standby interface) > “Dialed
number”, select a number, and press
Dial from a call
or OK button.
--1) Press MENU or OK button > “Call history”, you can select “Missed
log
calls”, “Received calls” and “Dialed numbers”,
- or press Navigation button (in Standby interface) > select “Missed
;
calls” (down), “Received calls” (left) and “Dialed numbers” (right) )
--2) Then press OK button or
.
Tips
• You can dial on-hook, without a dial tone (pre-dial). To pre-dial, enter a number, and then go
off-hook by lifting the handset or pressing Headset or Speaker button.
• If you make a mistake while dialing, press C button to erase digits.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
12
2xx Series IP Phone
Answering a Call
You can answer a call by simply lifting the handset, or you can use other options if they are
available on 2xx Series.
If you want to...
Answer
with
Then...
a
--1) Your phone ring;
--Pick up the handset
handset
Answer
with
--Press Speaker button
the
speakerphone
(Non-headset mode)
--Put on headset, press Headset button
Answer with the a
headset
so that the status light is Red
, and
then do as using speakerphone
Auto-answer
--1) Press MENU or OK button > “Function setting” > “Auto answer”;
--2) Select “Enable”;
--3) Your phone answers incoming calls automatically after a few rings.
Tips
• Your system administrator configures Auto-answer to use either the speakerphone or a headset.
You might use Auto-answer if you receive a high volume of incoming calls.
Ending a Call
To end a call, hang up. Here are some more details.
If you want to...
Hang up while using the
Then...
-- Return the handset to its cradle
Handset
Hang up while using the
-- Press Speaker button that is Red
speakerphone
Hang up while using the
--Press Handset button,
(Do not keep the headset mode)
Headset
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
13
2xx Series IP Phone
Using Hold and Resume (Switch Calling Line)
You can hold and resume calls.
If you want to...
Then...
Put a call on hold
Press HOLD button
Resume a call
Press HOLD button
Tips
• Engaging the Hold feature typically generates music or a beeping tone.
Transfer Calls
Transfer redirects a connected call. The target is the number to which you want to transfer the call.
If you want to...
Then...
Talk to the transfer
--1) Press TRANSFER button;
recipient
--2) Enter number;
before
transferring a call
--3) press “#”
(default) ,
-or wait five seconds(default)then transfer the call
(consult transfer)
Using Mute
With Mute enabled, you can hear others speaking, but the others can't hear from you . You can use
mute in conjunction with the handset, speakerphone, or a headset
。
If you want to...
Then...
Toggle Mute on
Press Mute button, then the status light of mute is Red
Toggle Mute off
Press Mute button, then the status light is off
Do Not Disturb
You can use the Do Not Disturb(DND) feature to block incoming calls on your phone with a busy
tone Can also be set to their voice mail or other extension numbers, etc.).
(
If you want to...
Then...
Enable DND on a line
--1) Press MENU or OK button > “Function setting” > “DND” >
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
14
2xx Series IP Phone
(select line) “Enable”
--2) All enabled line on the phone would changes to
status.
Press MENU or OK button > “Function setting” > “DND” >(select
Disable DND
line) “Disable”
3-way Conference
You can establish a three-party conference, during the conversation three phone parties can
communicate with each other.
If you want to...
Then...
Invite the transfer
recipient
conference
into
a
in
a
transferring
--1)
When
the
transfer
recipient
answer
the
call,
press
CONFERCENCE button on your phone;
--2) Then the held one, transfer recipient and you will be into a
conference, and the LCD will display
status.
Invite the third party
--1) Press CONFERENCE button in an active call;
into a conference in
--2) Enter the third party number
a active call
--3) After connected the third party, press CONFERENCE button
;
again
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
15
2xx Series IP Phone
5.Advanced Call Handling
Using the Phone Book
You can store a large number of contacts in your phone's directory. You can add, edit, delete, dial,
or search for a contact in this directory. However, it only can configure the phone book on web
page in 2xx Series. For details, you can refer to 7.Web Settings.
However, you can dial from Phone Book on the phone after setting phone book on web page.
If you want to…
Add Contacts
Then…
--1) Press Phone Book,
-or press MENU button > “Phone book”>“Personal phone
book>View All”,
-or press OK button > “Phone book”>“Personal phone book>View
All”;
--2) Select “Add contact”, press OK button;
--3) Use the navigation keys to select content, press OK button to set
and modify:
-Name: set the name of contact,
-NO.1-3: you can set up 3 contacts’ numbers,
-Group: the contacts be divided into different user’s groups
--4) Press Save soft key to complete
Add group
--1) Press DIR soft key,
-or press MENU button > “Phone book”>“Personal phone
book>View All”,
-or press OK button > “Phone book”>“Personal phone book>View
All”;
--2) Select the “add group” then press OK button;
--3) Use the navigation keys to select content, press OK button
to set
and modify:
-Group name: name of the group
www.escene.cn/en/
Escene Communications
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
16
2xx Series IP Phone
--4) Press Save soft key to complete
Modify group
--1) Press DIR soft key,
-or press MENU button > “Phone book”>“Personal phone
book>View All”,
-or press OK button > “Phone book”>“Personal phone book>View
All”;
--2) Select the “Modify group” then press OK button ;
--3) Select the group you want to modify, press the OK button
to set
and modify, press Save to save the change
Delete group
--1) Press DIR soft key,
-or press MENU button > “Phone book”>“Personal phone
book>View All”,
-or press OK button > “Phone book”>“Personal phone book>View
All”;
--2) Select the “Delete group” or OK button
;
--3) Select a group you want to delete, press OK button
View/Edit Contacts
--1) Press DIR soft key,
-or press MENU button > “Phone book”>“Personal phone book”,
-or press OK button > “Phone book”>“Personal phone book”;
--2) Select “View ALL”,
-or select a contact who are belong to different group;
--3) Select the contact, press the OK button or Enter (to edit the
contact’s information, press OK button )
LDAP
--1) --1) Press DIR soft key,
-or press MENU button > “Phone book”
-or press OK button > “Phone book”
--2)Select “LDAP”, press the OK button.
--3)Select “Search name->name”, then input the name ,and press OK
or Del.
www.escene.cn/en/
Escene Communications
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
17
2xx Series IP Phone
--4)Select “Search number->Number”, then input the number ,and
press OK or Del.
Pay attention: before you use LDAP function, you need to
configure LDAP rule in the web configure page.
Call
from
phone
--1) Press DIR soft key,
-or press MENU button > “Phone book”>“Personal phone book”,
book
-or press OK button > “Phone book”>“Personal phone book”;
--2) Select “View ALL”,
-or select a contact who are belong to different group;
--3) Select a contact, then press Dial,
(If there are multiple numbers of one contact,
press Dial to enter the
interface of “call options”, select the one you want to call and press
Dial)
Using Call Logs
Your phone maintains records of your missed, placed, and received calls.
If you want to…
Then…
View your call logs
--1) Press MENU button > “Call history” > “Missed Calls”, “Received
Calls”, or “Dialed numbers”
--2) Use the navigation keys to view the call record information.
Dial from a call log
Please refer to the previous part 4.Basic call handing – Placing a call.
Tips: Each call log store up to 20 entries on 2xx Series IP phone.
www.escene.cn/en/
Escene Communications
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
18
2xx Series IP Phone
6.Keypad Instruction
SayHi series IP phones are can be configured in two ways. The first you can use the phone keypad
where you can settings for you IP phones, the other you can log in to User Options web pages
where you can settings for you IP phones.
Use phone keypad to setting. Press MENU or OK button to the main menu, Use the navigation
keys to select menu, press OK button to confirm menu selections, press C button to delete input
information.
NOTEs: If the phone didn't have the MENU or other soft keys. Pls don't be your mind, because
sometimes it only in other series, like 320/330 series etc. When you want to type “.” in setting IP
address with keypad, you can press * button.
SIP Account Settings
2xx Series IP phone make calls based on sip accounts, 2xx Series IP phones can support 1
independent SIP account, Each account can be configured to different SIP server.
If you want to…
Create an SIP account
Then...
;
--1) Select “System setting” > “Advanced setting”
(The default is empty) ;
--3) Select “SIP” > “Account sip”;
--2) Enter the password required
--4) Select one of the account you want to setting, you can configure the
following parameters
-Enable account*: Select Enable
-Display Name: The name displayed on the screen
-User Name*: the account matched with the SIP server.
(extension
number) ,
-Authen usr: the Authenticated users matched with the SIP server.
(The default With the same account)
-user pwd*: the user password matched with the SIP server
-Description: description of this account,
-SIP1*: the primary SIP server, By default all calls through the
server,
-SIP2: the secondary SIP , When the primary server is
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
19
2xx Series IP Phone
unavailable ,use the SIP server
-Refresh time: Registration refresh interval, the minimum value is
20 The default value is 3600.
--5) Set up the above parameters, select “Submit changes” to saves
settings, Complete the account creation.
* Note: the parameters with the * mark must be set.
;
Disable sip account
--1) Select “System setting” > “Advanced setting”
(The default is empty) ;
--3) Select “SIP” > “Account sip”;
--4) Select “Enable account” > “Disable”;
--2) Enter the password required
--5) Select “Submit changes” to saves settings
Network Setting
If you want to …
network setting
Then…
;
--1) Select “System setting” > “Advanced setting”
--2) Enter the password required
(The default is empty) ;
--3) Select “Network”, you can configure the following parameters:
-Type: static IP or DHCP, PPPoE.
- DNS1: enter IP address of the primary DNS server
- DNS2: enter IP address of the secondary DNS server
-Web port: the default Web port is 80,if you change it(for example
change it to 88),you must use IP and Web port to login the web page (for
example http://192.168.0.200:88).It will take effect on next reboot.
-Telnet port: the default Telnet port is 23, if you change it (for
example change it to 2003), you must use IP and Telnet port to login the
manage page (for example telnet 192.168.0.200:2003).It will take effect
on next reboot.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
20
2xx Series IP Phone
Customizing Rings and Volume
If you want to…
Then…
Change the ring
--1) Select “System setting” > “Phone setting” > “Ring type”;
tone
--2) Press navigation to Select ring tone
Adjust the volume
--1) Select “System setting” > “Phone setting” > “Volume setting”
level
--2) You can adjust the volume level of following types
-Ring volume: Phone call ring volume,
-Handset volume: Handle output volume,
-Handset mic volume: Handle input volume,
-Speaker volume: Hands-free speaker output volume,
-Speaker mic volume: Hands-free input volume,
-Headset volume: Headphone output volume,
-Headset mic volume: Headset microphone input volume
WIFI setting(only WS220N has this item)
Tips: The WIFI ip phone support 802.11b/g/n, not support 802.11a.
If you want to…
Set WIFI
This…
--1)Choose "Menu">"System settings">"advanced settings">"advanced
password (default is empty)"
;
--2) Press navigation to choose WIFI settings
--3
)Press "ok" button to change the it Enable or Disable
-Set WIFI IP: Default IP: make it default setting , Modify IP:
change it what you want. Mode: mode one: change the wifi IP
10.0.X.X/8 ;mode two : change the wifi IP 1.0.X.X/8 (it can prevent IP
conflict)
-Current site: the wifi which the phone use now and information
-WPA/WPA2: select the encryption mode(AES/TKIP)
-Site list: search site what you want to connect.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
21
2xx Series IP Phone
--4
)Press "site list", choose one wifi network which the phone searched
-SSID: SSID name
-BSSID: the mac address of the WIFI network
-Channel:the channel of the WIFI network use
-Type:the type of the WIFI network
-Encrypt:the encrypt of the WIFI network
-Signal:the signal of the WIFI network
--5
)Press "SSID",set WIFI which you choose
-Encryption: the encryption of the WIFI network
-Key type: the key type of the WIFI network
-Key: the password which you should set to allow yourself to enter
the WIFI network
View status
If you want to see the phone status,Press MENU button > “view status” ,or press OK button >
“view status”,you can see the detail information of the phone.
If you want to ......
Then......
Network
You can see the network detail information of
the phone
Lines
You can see the SIP account
software
It include phone Mode software version
kernel version Upgrade date Running time
Expansion
Can check the expansion, if your phone support
this feature.
、
、
、
、
Diagnose
If you want to check the phone hardware function,Press MENU button > “diagnose” ,or press
OK button > “diagnose”,you can check the phone item as below.
If you want to ....
Then ....
Keys
You can check the phone keys
LCD
Press’OK’to start,press’C’to exit
Lights
Press’OK’to start,press’C’to exit
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
22
2xx Series IP Phone
Sound
Press’OK’to start
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
23
2xx Series IP Phone
7.Web Settings
We can configure IP Phone more handy through web setting. Press OK button on the keypad of the
phone to enter the status page and find out the IP address of IP phone. Enter it (for example
http://192.168.0.200) into the address bar of web browser. The default login name and password
are both “root”.
As below is an example picture.
Config Guide
You can finish the base configuration step-by-step by this guide.
When press ‘next’, you can configure the Network parameters for the phone,
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
24
2xx Series IP Phone
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
25
2xx Series IP Phone
After config the network parameter, press next, then you can config sip account for the phone.
Press Finish, the base configuration of the phone is complete, now you can use the phone to call
with sip.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
26
2xx Series IP Phone
WIFI Setting(only WS 220N has this item )
you can config the WIFI parameters for the phone on the web page.
If you want to search the site, you can click the
.
Choose anyone site and you will see,
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
27
2xx Series IP Phone
WIFI Status(only WS 220N has this item )
You can know what the status of the WIFI from this function.
Network
You can config the network parameters for the phone on the web page.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
28
2xx Series IP Phone
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
29
2xx Series IP Phone
Choose network, you will find the following parameters:
Field
IP Setting
DHCP
Hostname(Option12)
Hostname(Option60)
Static IP
IP Address
Netmask
Gateway
PPPoE
Username (pppoe)
Password (pppoe)
MTU (pppoe)
DNS Setting
Automatic
Description
Config the phone get ip info from DHCP server
Set the hostname with the option.
Set the hostname with the option.
Set the IP want you want to set.
Config the ip manual for phone
Config the netmask manual for phone
Config the gateway manual for phone
Use the PPPoE to connect the network.
The pppoe username
The pppoe password
The mtu for pppoe,default is 1500
Automatic to get the DNS.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
30
2xx Series IP Phone
Manual DNS
Setting the DNS want you want to set.
Primary DNS
The primary DNS server
Secondary
The secondary DNS server
MAC Address
MAC Address
Display the MAC of the phone
Port Management Setting
HTTP Port
The default web port is 80,if you change it(for example change it to88),
You must use IP and Web port to login the web page(for example
http://192.168.0.200:88). It will take effect on next reboot.
Telnet Port
the default Telnet port is 23,if you change it(for example change it to
2003),you must use IP and Telnet port to login the manage page (for
example telnet 192.168.0.200:2003).It will take effect on next reboot.
Socket5 Proxy Server
Socket5 Proxy Server
Enable/Disable Socket5 Proxy Server.
Server IP
Socket5 Proxy Server ip address.
Port
Socket5 Proxy Server port, default is 1080.
Anonymous Login
Enable/Disable Socket5 Proxy Server login username.
Paging Setting(NOTE: This feature priority is follow the serial number, one is highest than
the others)
Paging1
Enable/Disable Paging feature.
Group IP and Port
Group IP and Port with Paging.
PC Port
Normally choose Brigde,if you choose Router ,you need to input router IP address ,netmask.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
31
2xx Series IP Phone
Sip Account
The phone attempts to register to the SIP server using the account/registrar data provided by the
automatic or manual initialization.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
32
2xx Series IP Phone
Choose Account, you will find the following parameters:
Field
Description
SIP Setting
Enable
You can choose on/off to enable/disable the line.
Account Mode
You can choose VOIP/PSTN, but this model un-support PSTN, If you
want to, Pls contact us or buy another model.
Display Name
It is showed as Caller ID when making a phone call
Username
It is a username provide by SIP Server
Authenticate Name
It is authenticated ID for authentication
Password
It is a password provide by SIP Server
Label
Label with this account.
SIP Server
Server for registration, provided by administrator
Secondary server
When the main server can't work, it also can register in this secondary
server.
Outbound Proxy Server Put into the address with the outbound proxy server.
Secondary Outbound
Proxy Server
When the main out bound server can't work, it also can use this secondary
server.
Poling Interval Time Of Poling Interval Time Of Registration, default is 32 s.
Registration
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
33
2xx Series IP Phone
NAT Traversal
Defines the STUN server will be active or not
STUN Server
Session traversal utilities for NAT.
BLA
Share with the line.
BLA Number
BLA Number
Call Method
This method include SIP and TEL.
Subscribe Period
Subscribe expire time.
Register Expire Time
IP phone automatically registered every time
DNS-SRV
Enable/Disable DNS-SRV.
SIP Transport
There are UDP/TCP/TLS three options
Call
Amount Of Line
Account Used
The line key of account used, default is 2
Do Not Disturb
Enable/Disable Do Not Disturb
Anonymous Call
Rejection
Enable/Disable anonymous call.
Use Session Timer
Enable/Disable refresh session function. The device will send an Invite
packet to refresh the session during a call if it enable.
Session Timer
The refresh session time interval.
Allow-events
Enable/Disable Allow-events.
Registered NAT
Enable/Disable Registered to NAT
Ring Type
Set ringing type for current account.
UDP Keep-alive
Message
The phone periodically sends a UDP packet to keep the port active and to
avoid the server to shut down the port
UDP Keep-alive
Interval
Default is 30 second.
Security
SIP Encryption
Enable/Disable SIP encryption.
RTP Encryption
Enable/Disable RTP encryption.
Encryption Algorithm
The encryption algorithm at this time we only have RC4.
Encryption Key
The key with encryption.
RTP Port Range
The port range with RTP.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
34
2xx Series IP Phone
Programmable Keys
Line Keys: If you do not need more of the lines to use. you can change it to other features, like
Speed Dial/ Speed Dial Prefix/ DTMF/ BLF/ BLA/ Paging/ Call Park/ Intercom.
Function Keys: If you do not like the default setting with the function keys feature. You can
change it options to what you like or normal use.
NOTE: IF THE PHONE WITHOUT THE KEY, YOU DO NOT NEED TO SET THE KEY.
Soft Keys: Soft keys is the key with below display in the LCD. You can change it for your mind to
the other features in many all kinds of status.
NOTE: In this US Series, it just have two soft keys, so it only can work with one and two feature.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
35
2xx Series IP Phone
The three and four is other Series IP phone, e.g. ES320N/ES330N etc.
Audio
The IP phone supports the following voice codes: G.722, G.711A, G.711U, G.723, and G.729A.
You can enable/disable the desired codes via Web interface. Please contact your system
administrator for more details about the codes.
To enable/disable the codes:
1) Choose Audio-> Audio Codes
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
36
2xx Series IP Phone
2) Use the navigation keys to highlight the desired one in the Enabled/Disable Codes list, and press
the
/
to move to the other list.
3) Choose Submit to save the change.
Of course, you can control the voice bulk in this choose.
Phone Book
Group
You can add, edit and delete group in a phone book on web page of 2xx SERIES.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
37
2xx Series IP Phone
1) Click “PhoneBook” > “Group”,
If you want to add a Group, you just ought to click ‘Add Group’ .
You can edit an existed Group by click .
You can delete an existed Group by click , if you want to delete all Groups, you just ought to
click ’Delete All Group’.
2) When you add a group or edit an existed group, you can set several parameters as follow:
Group
ID
Serial number of a group
Description
Description of a group
Group Name
Name of a group
Contact
You can add, edit and delete contact in a phone book on web page of 2xx SERIES.
The phonebook can storage 300 contact entry.
1) Click “PhoneBook” > “Contact”,
If you want to add a Group, you just ought to click ‘Add Contact’.
You can edit an existed Contact by click .
You can delete an existed Contact by click , if you want to delete all Contacts, you just ought
to click ’Delete All Contact’.
2) When you add a Contact or edit an existed Contact, you can set several parameters as follow:
Contact
Serial Number
Serial number of a contact
First Name
The First Name of a contact
Last Name
The Last Name of a contact
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
38
2xx Series IP Phone
Mobile Number
The Number1 phone number of a contact
Office Number
The Number2 phone number of a contact
Other Number
The Number3 phone number of a contact
Group
You can assign a contact to a specific group. If there isn’t any group set
on the phone, the group is None by default.
Account
Select a SIP account relating this contact, that is you can dial to the
contact from this SIP account.
LDAP
1).
Overview
LDAP stands for Lightweight DIRectory Access Protocol which is a client-server protocol
for accessing a DIRectory service. LDAP lets you locate organizations, individuals, and
other resources such as files and devices in a network, whether on the Internet or on a
corporate intranet, and whether or not you know the domain name, IP address, or
geographic whereabouts.
An LDAP DIRectory can be distributed among many servers on a network, then replicated and
synchronized regularly.
2).
Configuration
Please note that LDAP Phonebook support on ES620\ES410\ES330\ES320\ES310\ES210, the
version must be V2.2.3.1-2210 and higher, then access to the web “PhoneBook>LDAP page,
you can find the configured option is like following picture. the detail configure in the
appendix.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
39
2xx Series IP Phone
BanList
You can add, edit and delete banlist in a phone book on web page of 2xx SERIES..
1) Click “PhoneBook” > “BanList”,
If you want to add a BanList, you just ought to click ‘Add BanList’.
You can edit an existed BanList by click .
You can delete an existed BanList by click , if you want to delete all BanLists, you just ought
to click ’Delete All BanList’.
2) When you add a BanList or edit an existed BanList, you can set several parameters as follow:
BanList
Serial Number
Serial number of a BanList
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
40
2xx Series IP Phone
Description
Description of a BanList
First Name
The First Name of a ban contact
Last Name
The Last Name of a ban contact
Mobile Number
The number1 phone number of a ban contact
Home Number
The number2 phone number of a ban contact
Office Number
The number3 phone number of a ban contact
Account
Select a SIP account relating this ban contact, that is the ban contact
can’t dial to this SIP account.
Enterprise Phonebook
You can download Enterprise Phonebook from this web interface. But you should do second
develop on the sip server to enable this function completely.
If the sip server no add some function to hold this option ,this option can be userd.
Advance
Phone Setting
You can use phone setting to set the time,qos,port Mirroring for the phone.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
41
2xx Series IP Phone
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
42
2xx Series IP Phone
When used Phone Setting option,you can set several parameters as follow:
Phone Setting
Basic
Called No Answer Time
When it has coming call and enable this feature, the caller will be
request time out in the stipulated time.
DTMF
The DTMF transmitted mode, include RFC2833,Inband,SIP Info,
Auto
Pound Send Method
When you to use the code looks like #28#123 or %23123, you need
to setting this feature.
RFC 2833 Pay Load
Default is 101, RTP Payload for DTMF Digits, Telephony Tones and
Telephony Signals
Back Light
The backlight of the phone LCD
Key Board Lock
Lock with the phone LCD, when you enable the right password, it
will auto disable this feature. if you want to use again, you need to
open it again in the web management. Tips: the password is the
same with the phone LCD. Default is empty. The Menu key can
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
43
2xx Series IP Phone
open it.
[Menu Key]: only lock the Menu function, others can normal work.
[Function Keys]: include Menu/Redial/Transfer/Hold etc. you just
can use the number keys and speaker key.
[All keys]: as the name implies.
[Lock & Answer]: Auto open Auto-answer and lock the keys,
PSTN Setting [If your phone does not support PSTN feature, you can ignore this option]
PSTN Ring Type
You can set the ringing type use PSTN or VOIP.
PSTN Prefix Code
Input the prefix code with PSTN
VOIP Prefix Code
Input the prefix code with VOIP
Hook Frequency
Setting the frequency with hook.
QoS
Sip QoS
The range is 0~63,default is 26
Voice QoS
The range is 0~63,default is 46
Call
Hot Line Function
It include Immediately Hot Line and Delay Hot Line
Hot Number
Input the number what you want to.
Call Waiting
When someone is coming a call after the call is talking, the second
call will be in the queue.
Call Waiting Tone
Select the frequency with the tone call waiting.
Auto Answer
Auto-answer the coming call, it also can set with group.
Auto Answer Mode
Include Hands Free / Handle / Headset.
Pickup Function
Someone can pickup you call when you talking with some body.
Pickup Code
The code with someone want to pickup your call.
Message
The code with voice message.
Fuzzy Search
Fuzzy search someone with the phone book in the idle.
Booking Voice Mail
Open this feature, the phone light(Message) will be bright when it
get message.
Play Voice Mail Tone
Open this feature, it will be ringing when it get message.
Miss Call Display
Turn on or off the display with Miss call in the phone LCD.
Call List Save
Save the call list into the phone.
DND Soft key
Display or not in the LCD.
Play Hang up Tone
The tone with hang up in busy.
Transfer Code
The code with transfer.
Conference Exit Result
Conference originator hang up the phone, hang up two ways of it.
Return
Refuse
Code
When
Select the code you want to with the server.
Return
DND
Code
When
Select the code you want to with the server.
Flash hook time
The time with the flash hook.
VOIP Call Forward
All ways
All ways transfer the call to others.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
44
2xx Series IP Phone
If busy
If the phone was busy working, the call will be transfer to others.
If No Answer
If the phone was no answer, the call will be transfer to others.
Ring Frequency
The ring frequency with the VOIP Call Forward.
Set Time Mode
Set Time Mode
The mode of set
Server/PSTN/Manual
time
for
phone,
include
SNTP Server
You can select in the list or input owner server address.
Update Interval
The update interval with SNTP.
Daylight Saving Time
Mode
Enable/disable the DST for the phone
Time Format
You can use 24 hour time format or 12 hour time format
Date Format
Normal format with date you can select in the list.
Time Zone-GMT
You can select different time zone for the phone
SNTP/SIP
Manual Setting
Manual Setting
This used to manual set time for the phone
Other
QoS
The QoS priority, support diff-server and precedence
Check When Upgrade
Software
Checking the upgrade software with MD5.
BLF Light
The light switch with BLF.
Headset Mode
Select headset mode with normal or seat.
Ring Type On Seat
Mode
Select ring type mode with headset or speaker.
Network
Mirroring
When select on, then you can capture the phone’s packet use
notebook which connect to pc port of the phone
Packet
VLAN Setting
You can add the phone and PC to different VLAN used VLAN Setting option.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
45
2xx Series IP Phone
When used VLAN Setting option, you can set several parameters as follow:
VLAN Setting
Enable VLAN
You can enable/disable vlan for phone and pc
VID
[LAN/PC Port]
The VLAN you want the phone or pc to join
VPN Setting
IF you need to setup a VPN Setting, you should fill below options.
When used VPN Setting option, you can set several parameters as follow:
VLAN Setting
Enable VPN
You can enable/disable VPN for phone and pc
VPN Type:
There is one choose you can choice.
VPN Server Addr
VPN server's ip
VPN User Name
VPN user's name
VPN Password
A password be used for authentication
Dial Plan setting
If you want to setup a dial plan, you can click "Dial Plan".
Click "add rule" to entry this interface.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
46
2xx Series IP Phone
Dial Plan Setting
ID
Dial Plan ID
IP
The ip of a phone which you want to call
prefix
The number which you need to press actually if you want to call the
phone
Called
Number
Insert
There have two option, Enable or Disable.
Position
Which position you want insert the number
Number
What number you want to insert
Called
Number
Delete
There have two option, Enable or Disable.
(Note: When you want to add code and delete at the same time, you can add code first, after that
base on the number you add, decide the position and length of the delete code.)
IP Strategy
You can use IP Strategy feature to make a list which line you want to allow make a call for your.
e.g. As following picture you can see it has 192.168.0.248 in the list. When you open this feature.
It means you just allow come from this IP address meeting
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
47
2xx Series IP Phone
Global SIP
You also can setup the SIP server on Global SIP.
Phone Maintenance
Log
If you need to catch a debugging Level log, you need setup on this interface. The capture packet
just can save 1000 information.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
48
2xx Series IP Phone
You can change the password used to login phone GUI in Password option.
In Password option, you can set several parameters as follow:
Password
Username
The login username of the web page
Old Password
The old password used to login of the web page
New Password
The new password used to login of the web page
Confirm Password
The new password used to login of the web page
Administrator
Login phone web page used administrator privileged
User
Login phone web page used general user privileged
Default Setting
You can load the phone to the factory default setting in default setting option.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
49
2xx Series IP Phone
Press the ‘Reset to Factory Setting’ option ,the phone will load to factory default setting on next
reboot.
Auto Provision
When you open the auto provision function, the phone will auto provision if the phone detect a
higher software or kernel which are put on the software server. The detail information about auto
provision you can see the appendix.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
50
2xx Series IP Phone
When use auto provision, you can set several parameters as follow:
Auto Provision
Auto Provision
You can enable/disable auto provision by select on/off
Protocol
The protocol use for auto provision, it include tftp/http/ftp
Software Server URL
The server address of the auto provision
Username
The username provide by provision server
Password
The password provide by provision server
Auto Download Software
This used to auto download software from server
Auto Download Kernel
This used to auto download kernel from server
Auto Download Config File
This used to auto download config file from server
Broadsoft Compatibility
This used to compatible the broadsoft format’s config file
Auto Download Expansion
Expansion must the phone support this feature. You can make
sure or not the phone model is it support with "P", e.g.
ES330N-E
Auto Download Enterprise
This used to auto download Enterprise Phonebook from server
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
51
2xx Series IP Phone
Phonebook
Auto Download
Phonebook
Personal
This used to auto download personal phonebook from server
Booting Checked
This used to checked the auto provision when phone booting
Disable the phone while
booting checking
Off or On
Auto Provision Frequency
This used to set the time interval for auto provision
Auto Provision Time
This used to the specific time for auto provision
Auto Provision Next Time
Reset the Auto Provision Next Upgrading time.
AES Enable
You can enable/disable AES encrypt for auto provision
AES Key
The key of the AES
Auto Provision Now
This used to do auto provision immediately
TR069
When the telegraphy want to test IMS, you can use this function.
FTP Upgrade
You can upgrade the software, kernel and configure file for the phone use ftp.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
52
2xx Series IP Phone
When use ftp upgrade, you can set several parameters as follow:
FTP Upgrade
Server IP
The ip address of the ftp server
Filename
The name of the file want to download from ftp server
Username
The username provide by ftp server
Password
The password provide by ftp server
Software Upgrade
Used to upgrade the software of the phone
Kernel Upgrade
Used to upgrade the kernel of the phone
Configuration
You can used update/backup to update/backup the configure file of the
phone
Phone Book
You can used update/backup to update/backup the phonebook of the
phone
EXT Module
You can used update/backup to update/backup the expansion of the
phone
TFTP Upgrade
You can upgrade the software, kernel and configure file for the phone use tftp.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
53
2xx Series IP Phone
When use tftp upgrade, you can set several parameters as follow:
TFTP Upgrade
Server IP
The ip address of the tftp server
Filename
The name of the file want to download from ftp server
Software Upgrade
Used to upgrade the software of the phone
Kernel Upgrade
Used to upgrade the kernel of the phone
Configuration
You can used update/backup to update/backup the configure file of the
phone
Phone Book
You can used update/backup to update/backup the phonebook of the
phone
EXT Module
You can used update/backup to update/backup the expansion of the
phone
HTTP Upgrade
You can upgrade the software, kernel and configure file for the phone use http.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
54
2xx Series IP Phone
When use http upgrade, you can set several parameters as follow:
HTTP Upgrade
Select a File
Browse the software/kernel/config file you want to upgrade from http
Software Upgrade
Used to upgrade the software of the phone
Kernel Upgrade
Used to upgrade the kernel of the phone
Configuration
You can used upload/download to upload/download the configure file
of the phone
XML Phone Book
You can used upload/download to upload/download the phonebook of
the phone
VCARD
One of the format with Phone book
EXT Module
You can used update/backup to update/backup the expansion of the
phone
Log
Debugging with IP phone
All Config File
Include Phone Book/ Config / Extern / Log/ Enterprise Phone Book
Reboot
You can use reboot option to reboot the phone.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
55
2xx Series IP Phone
When you press ‘Reboot’, the phone will reboot.
Phone Status
You can see the currently status of the phone when use Phone Status option.
System Info
You can see the system information when used System Info option.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
56
2xx Series IP Phone
Attention:
On this interface ,you can see the software and kernel which we used for test and this user_manual
is written base on this software and kernel.
This software version is V2.2.8.6-3279
This kernel version is v2.6.3
About
You can see the phone model when used About option.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
57
2xx Series IP Phone
8.Appendix:
:
Auto Provision
1.Bulid TFTP/HTTP/HTTPS/FTP Server
1.1 The Auto Provision Working principle
1. Bulid the FTP/HTTP/HTTPS/FTP Server
2. Place the Auto Provision related file(configure file/software/kernel) in server
3. The phone according to the the server URL and download the file to update the
phone data or upgrade software/kernel
4. You can do 3 way to start Auto Provision:
* Booting Checked: Auto Provision when the phone booting after reboot.
* Auto Provision Now manually.
* timing Auto Provision
1.2 Bulid TFTP/HTTP/HTTPS/FTP Server
The auto provision Server don’t distinguish the model of server,it only need the
server can support TFTP/HTTP/HTTPS/FTP protocol.
If you already build TFTP/HTTP/HTTPS/FTP Server,so you only need place some
related auto provision file in server and config the parameters in auto provision web
page.
If you don’t have TFTP/HTTP/HTTPS/FTP Server,we can suggest you to
download the server in Internet by yourself.
Tftp server:cisco tftp or tftpdwin
Ftp server: Serv-U Server
Http server:hfs server
If you finished build your TFTP/HTTP/HTTPS/FTP Server,you can follow do
this:place some related auto provision file in server and config the parameters in auto
provision web page.
2. Place the configure file/software/kernel in Server
When the software or kernel auto-provision is enabled and want to run, IP Phone
will check the software and kernel version at first, so we need make some
pre-configuration on the provisioning server.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
58
2.1
2xx Series IP Phone
Auto Provision for Software
1. Create a notepad file named“F000XXX.cfg” or “FD000XXX.cfg” (the “XXX” is
decided by the model of the IP phone you are using, for example, if the model is
ES620, the file name is “F000600.cfg”,the “FD” is decided by the model of the
IP phone with ‘N’, for example,ES320N);
*Named rule of the file:
F000600.cfg: for ES620, ES610 and DS622;
F000400.cfg: for ES410 and DS412;
F000300.cfg: for ES310 and DS312;
F000200.cfg: for ES210 and DS212.
F000320.cfg: for ES320
F000330.cfg: for ES330
F000118.cfg: for HS118
F000108.cfg: for HS108.
F0WS620.cfg: for WS620
F0WS320.cfg: for WS320
FD000600.cfg: for ES620N
FD000400.cfg: for ES410N
FD000330.cfg: for ES330N
FD000320.cfg: for ES320N
FD000220.cfg: for ES220N
FD000110.cfg: for IP115
FD000120.cfg: for IP125
FD000100.cfg: for US101N and US102N and US103N
FD000108.cfg: for HS108PZ
FD0WS320.cfg: for WS320N
FD0WS220.cfg: for WS220N
FD0WS100.cfg: for WS102N
2. Open the notepad file “F000XXX.cfg” or “FD000XXX.cfg” and write the new
software name in it, the software file name format must like this:S(2)_Phone
Model_version+Version Number. the “S2_” decided by the model of the IP
phone with ‘N’,for example,
ES620: the software name is like “S_ES620_version2.2.7.5-3077”
ES320N: the software name is like “S2_ES320N_version1.1.5.0-1147”
Other Model and so on.
Write down the new version you want to upgrade and save it on your
provisioning server.
*Please note that if the version is not older than (and same as) the one on your phone,
auto-provision of your software would be not available.
3. After it, upload the new software to the TFTP/HTTP/HTTPS/FTP provisioning
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
59
2xx Series IP Phone
server and complete the pre-configuration steps.
2.2
Auto Provision for Kernel
1. Create a notepad file named“K000XXX.cfg” or “KD000XXX.cfg”(the “XXX” is
decided by the model of the IP phone you are using, for example, if the model is
ES620, the file name is “K000600.cfg”, the “KD” is decided by the model of the
IP phone with ‘N’, for example,ES320N);
*Named rule of the file:
K000600.cfg: for ES620, ES610 and DS622 and WS620;
K000400.cfg: for ES410 and DS412;
K000300.cfg: for ES310 and DS312 and ES320 and HS118 and WS320;
K000200.cfg: for ES210 and DS212 and HS108;
K000330.cfg: for ES330;
K000100.cfg: for US101 and US102 and US103.
KD000320.cfg: for ES320N and WS320N
KD000330.cfg: for ES330N
KD000220.cfg: for ES220N and WS220N
KD000100.cfg: for US101N and US102N and US103N and WS102N
KD000108.cfg: for HS108PZ
KD000110.cfg: for IP115
KD000120.cfg: for IP125
KD000400.cfg: for ES410N
KD000600.cfg: for ES620N
2. Open the notepad file “K000X00.cfg” or “KD000XXX.cfg” and write the new
kernel name in it, for example,
K_uImage_200_version2.2.9.bin: for ES210 and DS212 andHS108;
K_uImage_300_version2.2.9.bin: for ES310 and DS312 and ES320 and HS118 and
WS320 and ES320 and ES330;
K_uImage_400_version2.2.9.bin: or ES410 and DS412;
K_uImage_600_version2.2.9.bin: for ES620, ES610 and DS622 and WS620;
K2_uImage_100N_version2.6.3.bin: all the model of the IP phone with ‘N’, ES320N
and ES220N and ES330N and so on
Write the new version you want to upgrade and save it on your provisioning
server.
*Please note that if the version is not older than (and same as) the one on your phone,
auto-provision of your kernel would be not available.
3. After it, upload the new kernel to the TFTP/HTTP/HTTPS/FTP provisioning
server and complete the pre-configuration steps.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
60
2.3
2xx Series IP Phone
Auto Provision for Configure file
1. Name of configuration file:
The configuration file on the provisioning server is named as the MAC address of IP
phone itself. Escene’s IP phones support two different configuration files for
auto-provision:
1. Normal Configuration file:
Normal Configuration file is the configuration file of your Escene IP phone. You can
download it from your phone (You can see the following chapter to see how to
download a configuration file from Escene IP hone) and modify by yourself.
If the phone model with ‘N’,for example ES320N,please see this:
The Normal Configuration file can separate two part:
Global parameters configuration file : for example Audio Codecs 、
Volume、Server URL and so on,make these global parameters to a file,and
can use by different model(model name come form web or LCD
menu),the filename format must be sys_model.xml
ES320N: sys_ES320N.xml
ES220N: sys_ES220N.xml
sys_ES320N.xml
Reference XML documents:
Private parameters configuration file:for example Account configuration
that different phone,the filename format must be MAC.xml,for example
00112233445.xml。
Reference XML documents
:
00112233445.xml
If the phone model don’t with ‘N’, or example ES620,please see this:
If the IP phone’s MAC address is 00:11:22:33:44:55, the normal configuration file of
it should be 001122334455.xml.
00112233445.xml
Reference XML documents :
2. Broadsoft Configuration files:
Broadsoft Configuration files support the format of Broadsoft IP-PBX. However, you
can use them for provisioning. There are two files should be set on your provisioning
server, they are also named by the MAC address of your phone
1. 001122334455.cfg: a configuration file for system settings, for example,
network, audio and so on.
2. 001122334455.txt: a configuration file for SIP accounts.
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
61
2xx Series IP Phone
3.How to create the Configuration file
2. Download a configuration file from your phone:
You can download a configuration file from your phone by HTTP as follow:
1. Open the web page of your IP phone, click “Phone Maintenance”>“HTTP
Upgrade”;
2. Then click “Download” of Configuration:
3. If you want to use this file to auto-provision, you just need to modify it by
yourself and rename it to the MAC address of your IP Phone with .xml suffix.
3. create the Configuration file Manually
If you want to create the Configuration file Manually,you must read this reference
documents about the Configuration file format detail and you may know the what
mean parameters of the Configuration file:
Configuration
file format detail.doc
2.4
Auto Provision for Expansion
The Extern.xml includes the settings of programmable buttons on the phone and all
Expansion Modules. All the phones can download the settings from a same file and
they will have the same settings (for example, Speed-dial, BLF and so on).
*You can’t rename the file on the provisioning server. The file name is fixed to
Account1_Extern.xml.(Account1 is the first account you register)
Reference XML documents :
1001_Extern.xml
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
62
2.5
2xx Series IP Phone
Auto Provision for Enterprise Phonebook
Escene IP phone supports Enterprise Phonebook and Personal Phonebook.They use
same XML format,you can see the reference documents.
4. Enterprise Phonebook:
Enterprise Phonebook is used for all staffs in your office. All phones will download a
common phonebook for all staffs. The file’s name must be
Enterprise_Phonebook.xml on your provisioning server and you can not rename it.
Reference XML documents:
2.6
Enterprise_Phonebook.xml
Auto Provision for Personal Phonebook
5. Personal Phonebook:
Personal Phonebook is individual for each IP phone. The file on your provisioning
server is named by the first account of your IP phone. If the IP phone’s first account is
1287, the Personal Phonebook of this phone is 1287_Phonebook.xml.
Reference XML documents:
1001_Phonebook.xml
3.Configure parameters in Auto Provision Web page
3.1
Auto Provision TFTP using DHCP Option 66
The following steps will descript auto-provision by TFTP. You also can use HTTP
and FTP for auto-provision with our phones.if you don’t use option 66,you can jump
to 3.2 section.
DHCP Server: (Microsoft Windows 2003 server)
3) Start up the “DHCP Management Console”;
4) Expand the DHCP scope which will contain the phones
5) Right-click on the “Scope Options” node
6) Select “Configure Options”
7) In the “General” tab, scroll down the list of options and identify the option
labeled “066 Boot Server Host Name”
8) Enable the “066 Boot Server Host Name” and enter the string value according to
the examples discussed previously
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
63
2xx Series IP Phone
string value:
192.168.0.201(TFTP Server IP Address);
9) Click the “OK” button
3.2 Configure parameters in Auto Provision Web page
1.
2.
3.
4.
Login in IP Phone web:
Input the IP Phone’s IP Address in browser;
Enter user and password with “root” then open the web page;
Click “Phone Maintenance” and select “Auto Provision”;
select like as follows:
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
64
2xx Series IP Phone
It supports three protocols in Auto-Provision:TFTP,HTTP and FTP.
The format with provisioning server URL is:
TFTP:
TFTP://192.168.0.201(192.168.0.201 is the default Server IP address)
HTTP:
HTTP://192.168.0.201
HTTPS:
HTTPS://192.168.0.201
FTP:
FTP://192.168.0.201
Note: You only need input the URL path, don’t need input the filename.
For example:
You place the 001122334455.xml in tftp://192.168.0.201/abc/,you only need
input tftp://192.168.0.201/abc,please don’t input tftp://192.168.0.201/abc/
001122334455.xml.
Username: the user to login FTP/HTTP/HTTPS server
Password: the password of the user using to login FTP/HTTP/HTTPS server
*Username and password are available in FTP/HTTP/HTTPS only (unavailable in
TFTP).
Auto Download Software:
Download software from server and upgrade it automatically.
Auto Download Kernel:
Download kernel from server and upgrade it automatically.
Auto Download Config File:
Download configuration file from server and update it automatically.
BroadsoftCompatibility:
If you select this function, you need to put two configuration files (with
Broadsoft format) on the provisioning server. Otherwise, you can download the
configuration file from your phone via HTTP (regarding the steps, you can refer to
“Download a configuration file from your phone” in this document.), modify it
and upload it to the server for auto-provision.
Auto Download Expansion:
Download configuration file of the Programmable buttons on your phone or
Expansion Modules automatically.
Auto Download Enterprise Phonebook:
Download Enterprise Phonebook from server and update it automatically.
Auto Download Personal Phonebook:
Download Personal Phonebook from server and update it automatically.
Booting Checked:
Check all items you had selected and upgrade/update them when the phone boot
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
65
2xx Series IP Phone
Auto Provision Frequency:
The auto provision Frequency which you want.
Auto Provision Time:
The time you want to execute auto-provision.
Timing Auto Provision
Examples of Auto Provision Frequency and Time:
1. When you set the Auto Provision Frequency and disableAuto Provision Time (set
to None), the Auto Provision function will work after the AutoProvision
Frequency;
2. When you set both Auto Provision Frequency and Auto Provision Time, for
example:
You set the AutoProvision Frequency to 24 hours, and the Auto Provision Time
to 2:00 at 8:00 today (1, Jan), it will pass 24 hours at first and work at the nearest
2:00, it means that the Auto Provision function will work at 2:00 on the day after
tomorrow (3, Jan).
Therefore, if you want this function work at 23:00 tonight and it is 8:00 now, you
need to set the Auto Provision Frequency to 0 hours and the Auto Provision Time
to 23:00.
3. If you finished the config Auto Provision Frequency and Auto Provision
Time,you can click the button of “Reset Timing” and timing is finished.
4. Auto Provision Next Time show what next time start Auto Provision.
5. The 3 and 4 ponit only support in the phone model with ‘N’,for example
ES320N.
AES Encryption:
AES encryption is used for all the setting files of your phone (include
configuration file, Expansion file, Enterprise/Personal Phonebook etc. You just need
to enable the AES Encryption function and input the AES Key matching the one on
your server on.
Reference AES Encryption documents:
Auto-provision
AES feature use Instructions.doc
----------------------------------------------------------------------------------------------------------------------
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
66
2xx Series IP Phone
Escene Communication Co.Ltd
Address: Floor 4,Building C,Yuean Industrial Park,Huangcun Road No.51,Tianhe
District,Guangzhou,China.
Postal Code: 510660
Tel: (+86)20-28096798
Fax: (+86)20-28096786
http://www.escene.cn/en/
Technical Support:
E-mail: support@escene.cn
www.escene.cn/en/
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
Download PDF

advertising