Dynasty 350 and 700 ® Quick Specs Industrial Applications Processes Precision Fabrication Heavy Fabrication Pipe and Tube Fabrication Aerospace Aluminum Ship Repair Anodized Aluminum Fabrication TIG (GTAW) Pulsed TIG (GTAW-P) Stick (SMAW) Air Carbon Arc (CAC-A) 350: 1/4 in maximum 700: 3/8 in maximum Issued January 2011 • Index No. AD/5.0 TIG/Stick Welding Power Source Input Power 208 – 575 V, 3- or 1-Phase Amperage Range 350: 3 – 350 A 700: 5 – 700 A Rated Output 350: 300 A at 32 V, 60% Duty Cycle 700: 600 A at 44 V, 60% Duty Cycle Weight 350: 135.5 lb (61 kg) 700: 198 lb (90 kg) The Power of Blue . ® AC TIG Features Allows for any input voltage hookup (208–575 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power. Miller recommends aluminum filler. Meter calibration allows meters to be calibrated for certification. 120 V auxiliary power receptacle for cooling system or small tools. Wind Tunnel Technology™ protects internal electrical components from airborne contaminants, extending the product life. Fan-On-Demand™ power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled though the machine. Blue Lightning™ high-frequency arc starter for non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set and increases productivity. Lift-Arc™ start provides AC or DC arc starting without the use of high frequency. Program memory features 9 independent program memories that maintain/save your parameters. Auto-postflow calculates the length of postflow time based on the amperage setting. This eliminates the need to independently set the postflow time for different amperages. This feature preserves your tungsten and prevents porosity. Independent amplitude/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode. Extended AC balance (30–99%) controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum. AC frequency (20–400 hz) controls the width of the arc cone and the force of the arc. AC Waveforms Dynasty 350 machine only Dynasty 350 Complete Package with Wireless Foot Control Stick Features (AC/DC) Tailored arc control (DIG) allows the arc characteristic to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010. ™ Hot Start adaptive control provides positive arc starts without sticking. AC frequency control adds additional stability when Stick welding in AC for smoother welds. Advance squarewave, fast freezing puddle, deep penetration and fast travel speeds. Soft squarewave for a soft buttery arc with maximum puddle control and good wetting action. Sine wave for customers that like a traditional arc. Quiet with good wetting. Triangular wave reduces the heat input and is good on thin aluminum. Fast travel speeds. DC TIG Features Exceptionally smooth and precise arc for welding exotic materials. High-speed DC TIG pulse controls. Pulse frequency capable of pulsing 5000 pulses per second. Pulsing adds arc stability, reduces heat input and warpage and can increase travel speeds. Other parameters include peak amperage, peak time and background amperage. Power source is warranted for 3 years, parts and labor. Original main power rectifier parts are warranted for 5 years. Miller Electric Mfg. Co. Equipment Sales US and Canada Web Site An Illinois Tool Works Company 1635 West Spencer Street Appleton, WI 54914 USA Phone: 866-931-9730 FAX: 800-637-2315 International Phone: 920-735-4554 International FAX: 920-735-4125 www.MillerWelds.com Specifications Model Input Power Dynasty Three350 Phase SinglePhase Dynasty Three700 Phase SinglePhase (Subject to change without notice.) Welding Max. Amperage Open-Circuit Range Voltage 3– 350 A 3– 350 A 5 – 700 A 5 – 700 A 75 VDC 10 –15 VDC* 75 VDC 10 –15 VDC* 75 VDC 10 –15 VDC* 75 VDC 10 –15 VDC* Rated Output Amps Input at Rated Load Output, 50/60 Hz 208 V 230 V 400 V 460 V 575V KVA KW 250 A at 30 V, 100% Duty Cycle 29 26 15 13 10 10.3 9.9 300 A at 32 V, 60% Duty Cycle 35 32 18 16 13 12.7 12.1 180 A at 27.2 V, 100% Duty Cycle 35 32 — 15 12 7.4 6.8 225 A at 29 V, 60% Duty Cycle 47 43 — 21 17 9.8 9.1 500 A at 40 V, 100% Duty Cycle 75 68 39 34 27 27 26 600 A at 44 V, 60% Duty Cycle 97 88 51 44 35 35 34 360 A at 34 V, 100% Duty Cycle 82 74 — 37 30 17 16 450 A at 38 V, 60% Duty Cycle 115 104 — 52 42 24 22 Certified by Canadian Standards Association to both the Canadian and U.S. Standards. Net Weight Dimensions H: 24-3/4 in (629 mm) W: 13-3/4 in (349 mm) D: 22 in (559 mm) 135.5 lb (61 kg) with TIGRunner® H: 45-1/8 in (1146 mm) W: 23-1/8 in (587 mm) D: 43-3/4 in (1111 mm) with TIGRunner® 308 lb (140 kg) H: 34-1/2 in (876 mm) W: 13-3/4 in (349 mm) D: 22 in (559 mm) 198 lb (90 kg) with TIGRunner® H: 55-1/8 in (1400 mm) W: 23-1/8 in (587 mm) D: 43-3/4 in (1111 mm) with TIGRunner® 370 lb (168 kg) All CE models conform to the applicable parts of the IEC 60974 series of standards. *Indicates sense-voltage for Lift-Arc TIG and Low OCV Stick. Control Panel 11 12 10 13 9 1 f 2 3 4 5 6 7 8 Control Panel Parameter Values 1. Memory 36 Combinations (9 AC TIG) (9 AC Stick) (9 DC TIG) (9 DC Stick) 2. Polarity AC/DC 3. Process/ TIG: HF Impulse, Lift Arc Arc Starting STICK: Adaptive Hot Start 4. Output Control Standard Remote, 2T Trigger Hold, Output ON 5. Pulser Control Pulses per Second DC: 0.1– 5000 PPS AC: 0.1 – 500 PPS Peak Time 5 – 95% Background Amps 5 – 95% 2 6. Sequencer Control Initial Amps Dynasty 350: 3 – 350 A Dynasty 700: 5 –700 A Initial Slope 0.0 – 50.0 Seconds Final Slope 0.0 – 50.0 Seconds Final Amps Dynasty 350: 3 – 350 A Dynasty 700: 5 –700 A 7. Gas/DIG Preflow 0.0 – 25.0 Seconds Postflow Auto Postflow, Adjust 0.0 – 50 Seconds DIG 0 –100% 8. AC Waveshape EN Amperage 3 – 350 A/5 –700 A EP Amperage 3 – 350 A/5 –700 A Balance 30 – 99% AC Frequency 20 – 400 Hz 9. Amperage Control 10. Encoder Control 11. Ammeter Display 12. Voltmeter Display Additional Setup Parameter Values Preprogrammed Starts Dynasty 350 .020 – 3/16 in Tungsten Dynasty 700 .040 –1/4 in Tungsten Programmable Starts Amperage Dynasty 350: 3 – 200 A Dynasty 700: 5 – 200 A Time 0 – 200 Milliseconds Ramp Time 0 – 250 Milliseconds Minimum Amperage Dynasty 350: 3 – 25 A Dynasty 700: 5 – 25 A Additional Triggers 3T, 4T, Mini Logic, 4T Momentary Waveshapes Advance Squarewave, Soft Squarewave, Sine Wave, Triangular wave Amplitude Lock EN EP Same, EN EP Independent Spot/Weld Timer 0.0 – 999 Seconds OCV Low OCV, Normal OCV Stick Stuck Check On/Off Lockouts Four levels Arc Timer 0.0 – 9999 Hours and 0 – 59 Min Cycle Counter 0 – 999,999 Cycles Meter Calibration ±0 – 20.0 Amps ±0 – 20.0 Volts Performance Data DUTY CYCLE Dynasty 350 % 3-PHASE AMPERAGE 30% 60% 100% % Dynasty 700 350 A 300 A 250 A % 30% 60% 100% 1-PHASE AMPERAGE 10% 30% 60% 100% 3-PHASE AMPERAGE 350 A 250 A 225 A 180 A % 700 A 600 A 500 A 1-PHASE AMPERAGE 10% 30% 60% 100% 700 A 500 A 450 A 360 A TIG Upgrade Chart Which Machine is Right for You? Why Upgrade? Syncrowave 350 Dynasty 350 Dynasty 350 Benefits Maximum Thickness Capacity 1/2 in Aluminum UPGRADE 5/8 in Aluminum Increases aluminum thickness. High Frequency Arc Starting Continuous HF UPGRADE Start Only Start Only limits HF interference issues. Frequency Control AC Output Control Fixed at 60 Hz UPGRADE Variable 20–400 Hz Higher frequencies provide better arc control and faster travel speeds. AC Waveforms Soft Squarewave UPGRADE Advanced Squarewave Soft Squarewave Advanced Squarewave=Travel faster Soft Squarewave= Maximum puddle control Sine Wave Triangular Wave Sine Wave= Traditional characteristics Triangular Wave= Reduced heat input Weld Aluminum with Pointed Tungsten Waveshaping controls maintain the point. The benefits are: reduced heat input into your part, smaller weld beads, better starting and more control of the arc. UPGRADE Portability 496 lb Manual Links 208/230/460 V Single-Phase UPGRADE 135 lb Auto-Line™ 208–575 V Single-Phase or Three-Phase Easier to move because of size and weight. Auto-Line™ allows the unit to operate on any voltage. Single- or three-phase. Even generators! Power Draw at 300 Amps 110 A at 230 V Single-Phase UPGRADE 32 A at 230 V Three-Phase Power requirement to operate is much less. Smaller electrical service needed, smaller breaker/fuses and power cord. Precise Controls Some Digital Controls UPGRADE All Digital Controls Accuracy and repeatability with all digital controls. 3 AC Waveshape Controls Feature Waveform AC Balance Control 51 – 99% EN Amperage Controls arc cleaning action. Adjusting the % EN of the AC wave controls the width of the etching zone surrounding the weld. Effect on Bead % EP Bead % EN Time (1 AC Cycle) Deep, narrow penetration Amperage 30 – 50% EN % EP Increases balling action of the electrode No Visible Cleaning Wider bead and cleaning action 0 Bead % EN Time (1 AC Cycle) 60 Cycles per Second AC Frequency Control Amperage Narrow bead, with no visible cleaning 0 Note: Set the AC Balance control for adequate arc cleaning action at the sides and in front of the weld puddle. AC Balance should be fine tuned according to how heavy or thick the oxides are. Controls the width of the arc cone. Increasing the AC Frequency provides a more focused arc with increased directional control. Reduces balling action and helps maintain point Effect on Appearance % EP Shallow penetration Wider bead, good penetration — ideal for buildup work Cleaning Wider bead and cleaning action 0 Bead % EN Note: Decreasing the AC Frequency softens the arc and broadens the weld puddle for a wider weld bead. Time (1 AC Cycle) Amperage 120 Cycles per Second % EP 0 % EP Cleaning Narrower bead for fillet welds and automated applications Narrower bead and cleaning action Bead % EN % EN Time (1 AC Cycle) 0 EP+ EN – More current in EN than EP: Deeper penetration and faster travel speeds Narrow bead, with no visible cleaning Bead Time No Visible Cleaning Current Allows the EN and EP amperage values to be set independently. Adjusts the ratio of EN to EP amperage to precisely control heat input to the work and the electrode. EN amperage controls the level of penetration, while EP amperage dramatically effects the arc cleaning action along with the AC Balance control. Current Independent AC Amperage Control Cleaning EP+ 0 EN – More current in EP than EN: Shallower penetration Wider bead and cleaning action Bead Time Cleaning 4 AC Waveshape Controls (Continued) AC Waveform Selection Select from four different AC waveforms to optimize the arc characteristic for your application. Choose from: ADVANCED SQUAREWAVE SOFT SQUAREWAVE All the benefits of advanced square, fine tuned to provide a smooth, soft arc with maximum puddle control and good wetting action. (+) Fast transitions for responsive and dynamic arc. 0 (–) Amps Amps (+) 0 (–) Time (1 AC Cycle) Time (1 AC Cycle) SINEWAVE 0 (–) (+) Amps Square transitions eliminate the need for continuous HF, while the sinewave peaks soften the arc. (+) Amps TRIANGULAR WAVE 0 (–) Time (1 AC Cycle) Time (1 AC Cycle) Unconventional wave provides the punch of the peak amperage, while reducing overall heat input. Quick puddle formation reduces weld time — limiting heat input and reducing weld distortion, especially on thin materials. Pulse TIG Controls High Speed DC TIG-Pulse Controls • PPS Pulses per second (Hz): DC = 0.1 – 5,000 PPS / AC = 0.1 – 500 PPS • % ON – % Peak Time: 5 - 95% (Controls the amount of time during each pulse cycle at the PEAK amperage.) • Background Amps: 5 – 99% (Sets the low-pulse amperage value as a % of the Peak Amps.) CONVENTIONAL PULSED TIG Peak Amps Peak Time % Background Amps (% of Peak) HIGH SPEED PULSED TIG Peak Amps Peak Time % Background Amps (% of Peak) Pulse Cycle Typically from 1 to 10 PPS. Provides a heating and cooling effect on the weld puddle and can reduce distortion by lowering the average amperage. This heating and cooling effect also produces a distinct ripple pattern in the weld bead. The relationship between pulse frequency and travel speed determines the distance between the ripples. Slow pulsing can also be coordinated with filler metal addition and can increase overall control of the weld puddle. Pulse Cycle In excess of 40 PPS, Pulsed TIG becomes more audible than visible — causing increased puddle agitation for a better as-welded microstructure. Pulsing the weld current at high speeds — between a high Peak and a low Background amperage — can also constrict and focus the arc. This results in maximum arc stability, increased penetration and increased travel speeds (Common Range: 100 – 500 PPS). The Arc-Sharpening effects of high speed pulsing are expanded to new dimensions. The ability to pulse at 5,000 PPS further enhances arc stability and concentration potential — which is extremely beneficial to automation where maximum travel speeds are required. 5 Packages Dynasty Power Sources ® Dynasty® 350 #907 204 (CSA) (Auto-Line™ 208–575 VAC) Dynasty® 700 #907 101 (CSA) (Auto-Line™ 208–575 VAC) Dynasty® 350 #907 204-02-1 (CE) (Auto-Line™ 380–575 VAC) Dynasty® 700 #907 101-02-1 (CE) (Auto-Line™ 380–575 VAC) Includes 8 ft (2.4 m) primary cord, (2) Dinse 50 connectors, and DVD Setup Video (#251 116). Includes (2) thread lock weld cable connectors (#225 029), (1) water-cooled thread lock torch adapter (#225 028) for #18 or #20 torches, and DVD Setup Video (#251 116). Note: TIG torch adapter must be ordered separately. Note: Primary cord and TIG torch must be ordered separately. TIGRunner Packages ® Dynasty 350 TIGRunner® #907 204-00-1 (CSA) Dynasty 700 TIGRunner® #907 101-00-1 (CSA) Completely assembled. Package includes: Dynasty® 350 (#907 204) Coolmate™ 3.5 Coolant System Cart with the following features: single cylinder rack, foot pedal holder, (3) cable/torch holders, (2) TIG electrode filler holders and a convenient drawer for tungsten and consumable storage Completely assembled. Package includes: Dynasty® 700 (#907 101) Coolmate™ 3.5 Coolant System Cart with the following features: single cylinder rack, foot pedal holder, (3) cable/torch holders, (2) TIG electrode filler holders and a convenient drawer for tungsten and consumable storage Note: Torch package and coolant must be ordered separately. Note: Torch package and coolant must be ordered separately. Complete Packages Dynasty 350 Complete #951 402 (CSA) w/Wireless Foot Control #951 401 (CSA) w/Foot Control Dynasty 700 Complete #951 404 (CSA) w/Wireless Foot Control #951 403 (CSA) w/Foot Control Completely assembled. Completely assembled. Package includes: Dynasty® 700 TIGRunner (#907 101-00-1) Wireless Remote Foot Control (#300 429) or RFCS-14 HD Foot Control (#194 744) 25 ft (7.6 m) Weldcraft WP18SC water-cooled torch Torch cable cover AK18C Torch Accessory Kit includes shielding cups, collets, collet bodies and 2% cerium tungsten electrodes (3/32, 1/8 and 5/32 in) Smith regulator/flowmeter H1954D-580 Gas hose (regulator to machine) Water-cooled thread lock torch adapter 12 ft (3.7 m) 4/0 weld lead with clamp (work or ground lead) 4 gallons of pre-mixed low-conductivity coolant (#043 810) Package includes: Dynasty® TIGRunner® (#907 204-00-1) Wireless Remote Foot Control (#300 429) or RFCS-14 HD Foot Control (#194 744) 25 ft (7.6 m) Weldcraft CS310 water-cooled torch Torch cable cover CS310AKC torch accessory kit includes shielding cups, collets, collet bodies, and 2% cerium tungsten electrodes (1/16, 3/32, and 1/8 in) Smith regulator/flowmeter HM2051A-580 Gas hose (regulator to machine) Water-cooled Dinse torch adapter 15 ft (4.6 m) 1/0 weld lead with clamp (work or ground lead) and Dinse connector 4 gallons of pre-mixed low-conductivity coolant (#043 810) 6 Genuine Miller Accessories Torch Kits 250 A Water-Cooled Torch Kit #300 185 25 ft (7.6 m) Weldcraft® WP20 torch Torch cable cover AK4C torch accessory kit includes shielding cups, collets, collet bodies and 2% cerium tungsten electrodes (1/16, 3/32 and 1/8 in) Smith® regulator/flowmeter HM2051A-580 Gas hose (regulator to machine) Water-cooled Dinse torch adapter 15 ft (4.6 m) 1/0 weld lead with clamp (work or ground lead) and Dinse connector 300 A Water-Cooled Torch Kit #300 183 Recommended for Dynasty 350 25 ft (7.6 m) Weldcraft® CS310 torch Torch cable cover CS310AKC torch accessory kit includes shielding cups, collets, collet bodies and 2% cerium tungsten electrodes (1/16, 3/32 and 1/8 in) Smith® regulator/flowmeter HM2051A-580 Gas hose (regulator to machine) Water-cooled Dinse torch adapter 15 ft (4.6 m) 1/0 weld lead with clamp (work or ground lead) and Dinse connector 400 A Water-Cooled Torch Kit #300 186 Recommended for Dynasty 700 25 ft (7.6 m) Weldcraft® WP18SC torch Torch cable cover AK18C torch accessory kit includes shielding cups, collets, collet bodies and 2% cerium tungsten electrodes (3/32, 1/8 and 5/32 in) Smith® regulator/flowmeter H1954D-580 Gas hose (regulator to machine) Water-cooled thread lock torch adapters 12 ft (3.7 m) 4/0 weld lead with clamp (work or ground lead) Runner Cart #300 244 Designed to accommodate Dynasty® or Maxstar® 350 or 700 power sources and a Coolmate™ 3.5 Cooler. Cart features single cylinder rack, foot pedal holder, (3) cable/ torch holders, (2) TIG electrode filler holders and a convenient drawer for tungsten and consumable storage. Weld Current Sensor #300 179 Field Detects when work clamp is not connected and prevents expensive damage to disconnect devices and input power cord and wiring. Wireless Remote Hand Control #300 430 For remote current and contactor control. Receiver plugs directly into the 14-pin receptacle of Miller machine. 300 ft (91.4 m) operating range. Coolmate™ 3.5 #300 245 Designed to integrate with the Dynasty® and Maxstar® 350 and 700 power sources. For use with water-cooled torches rated up to 600 amps. 3.5 gallon capacity. TIG Coolant #043 810 Sold in multiples of 4. Pre-mixed lowconductivity Miller coolant contains ethylene glycol and deionized water to protect from freezing and boiling -37˚ to 227˚F (-38˚ to 108˚C). 1-gallon plastic recyclable bottles. Educational Materials To order these items, distributors can call the Miller Literature Distribution Center at 1-920-735-4356, or FAX 1-920-735-4011. Gas Tungsten Arc (TIG) Welding Book #170 555 Simulator and Setup CD-ROM #233 558 DVD Setup Video #251 116 Video topics include Tungsten Selection, Setup Menus, DC Pulse, Sequencer, Balance and Frequency Settings. (Included with machine.) Tungsten Tungsten is 7 in length and available in pkgs of 10. Order from Miller Parts. Water-Cooled Dinse #195 377 For Dynasty and Maxstar® 350. Used to adapt WP20, WP18, and CS310 to dinse-style connector. Order from Miller Parts. 2% Ceriated (orange) for AC/DC applications #WC040X7 .040 in, 10 – 80 A #WC116X7 1/16 in, 70 –150 A #WC332X7 3/32 in, 140– 250 A #WC018X7 1/8 in, 225 – 400 A #WC532X7 5/32 in, 300 – 500 A Water-Cooled Thread Lock #225 028 For Dynasty and Maxstar 700. Used with (WP125, WP24W, WP25, WP20, WP18, WP12, CS310, CS410, WP22, WP27) water-cooled torch. Order from Miller Parts. 1.5% Lanthanum (gold) for AC/DC applications #WL040X7 .040 in, 10 – 80 A #WL116X7 1/16 in, 70 –150 A #WL332X7 3/32 in, 140 – 250 A #WL018X7 1/8 in, 225 – 400 A #WL532X7 5/32 in, 300 – 500 A Automation Interface Connection Kit #195 516 Field Provides control of power source welding parameters through a 28-pin receptacle. The 28-pin receptacle replaces the standard 14-pin receptacle and requires a PLC controller to operate the power source. Ideal for automated equipment integration. RCCS-14 Remote Contactor and Current Control #043 688 14-pin plug. North/south rotary-motion fingertip control fastens to TIG torch using two Velcro® straps. Includes 26.5 ft (8 m) control cord. RFCS-14 HD Foot Control #194 744 Maximum flexibility is accomplished with a reconfigurable cord that can exit the front, back or either side of the pedal. Foot pedal provides remote current and contactor control. Includes 20 ft (6 m) cord and 14-pin plug. RHC-14 Hand Control #242 211 020 Miniature hand control for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 83 mm). Includes 20 ft (6 m) cord and 14-pin plug. Remote Controls and Switches RMLS-14 Switch #129 337 Momentary- and maintained-contact rocker switch for contactor control. Push forward for maintained contact and backward for momentary contact. Includes 26.5 ft (8 m) cord and 14-pin plug. Wireless Remote Foot Control #300 429 For remote current and contactor control. Receiver plugs directly into the 14-pin receptacle of Miller machine. 90 ft (27.4 m) operating range. RMS-14 On/Off Control #187 208 Momentary-contact switch for contactor control. Rubber-covered pushbutton dome switch ideal for repetitive on-off applications. Includes 26.5 ft (8 m) cord and 14-pin plug. 7 Ordering Information Equipment and Options Stock No. Description Dynasty 350 Dynasty® 350 TIGRunner ® Dynasty® 350 Complete with Wireless Remote Foot Control Dynasty® 350 Complete with Foot Control Dynasty® 350 International #907 204 #907 204-00-1 #951 402 Auto-Line 208 – 575 VAC, 50/60 Hz, CSA. 8 ft primary cord Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA. 8 ft primary cord. Requires coolant Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA. 8 ft primary cord #951 401 #907 204-02-1 Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA. 8 ft primary cord Auto-Line™ 380 – 575 VAC, 50/60 Hz, CE. 8 ft primary cord Dynasty® 700 Dynasty® 700 TIGRunner ® Dynasty® 700 Complete with Wireless Remote Foot Control Dynasty® 700 Complete with Foot Control Dynasty® 700 International #907 101 #907 101-00-1 #951 404 Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA. Requires coolant Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA #951 403 #907 101-02-1 Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA Auto-Line™ 380 – 575 VAC, 50/60 Hz, CE #300 185 #300 183 #300 186 #WP2625RM See page 7 See page 7. Recommended for Dynasty 350 See page 7. Recommended for Dynasty 700 For Dynasty 350 only. Adapter #195 379 required. Order from Miller Parts Distributor: See Miller Parts Catalog #300 429 #300 430 #043 688 #194 744 #242 211 020 #129 337 #187 208 #242 208 025 #242 208 050 #242 208 080 Foot control with wireless 90 ft (27.4 m) operating range Hand control with wireless 300 ft (91.4 m) operating range North/south fingertip control Heavy-duty foot control Hand control Momentary/maintained rocker switch Momentary rubber dome switch 25 ft (7.6 m) 50 ft (15.2 m) 80 ft (24.4 m) #300 244 #300 245 #043 810 #195 516 #300 179 #170 555 #233 558 #251 116 See page 7 Requires coolant Sold in multiples of four in 1-gallon plastic bottles Field. Provides required automation connections Field. Installation required Order at MillerWelds.com/resources/tools ® TIG Torch Kits Weldcraft® 250 A Water-Cooled Torch Kit Weldcraft® 300 A Water-Cooled Torch Kit Weldcraft® 400 A Water-Cooled Torch Kit Weldcraft® 200 A Air-Cooled Torch Consumables and Tungsten Gas Cylinder, Hose and Fittings Remote Controls Wireless Remote Foot Control Wireless Remote Hand Control RCCS-14 RFCS-14 HD RHC-14 RMLS-14 RMS-14 Extension Cables Accessories Runner™ Cart Coolmate™ 3.5 TIG Coolant Automation Interface Kit Weld Current Sensor Gas Tungsten Arc (TIG) Welding Book Simulator and Setup CD-ROM DVD Setup Video Torch Adapters Water-Cooled Dinse #195 377 Water-Cooled Thread Lock #225 028 Cable Connectors Dinse Connector 50 mm (1 male) Thread Lock Connectors (2 male) Dinse Connector 50 mm (1 male, 1 female) Tweco® Terminal Adapter Cam-Lok Terminal Adapter #042 418 #225 029 #042 419 #042 465 #042 466 Qty. ™ Included with machine Supplied with power source and torch kits Used to connect water-cooled torch to Dinse terminal machine. For WP20, WP18 and CS310 (adapter included in Complete Package). Order from Miller Parts Used to connect water-cooled torch to Dynasty/Maxstar 700. Order from Miller Parts Supplied with power source and torch kits Used to connect weld lead to Dinse terminal machine Used to connect weld lead to Dynasty 700 or Maxstar 700. Order from Miller Parts Used to extend weld cables Male Dinse to female Tweco Male Dinse to female Cam-Lok Miscellaneous Stick Electrodes Welding and Work Cables Welding Gloves and Helmet Date: Total Quoted Price: Distributed by: Litho in USA Price
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement