Anritsu | MP1777A | ANRITSU MP1570A Datasheet - Test Equipment Solutions UK

Test Equipment Solutions Datasheet
Test Equipment Solutions Ltd specialise in the second user sale, rental and distribution of
quality test & measurement (T&M) equipment. We stock all major equipment types such as
spectrum analyzers, signal generators, oscilloscopes, power meters, logic analysers etc from
all the major suppliers such as Agilent, Tektronix, Anritsu and Rohde & Schwarz.
We are focused at the professional end of the marketplace, primarily working with customers
for whom high performance, quality and service are key, whilst realising the cost savings that
second user equipment offers. As such, we fully test & refurbish equipment in our in-house,
traceable Lab. Items are supplied with manuals, accessories and typically a full no-quibble 2
year warranty. Our staff have extensive backgrounds in T&M, totalling over 150 years of
combined experience, which enables us to deliver industry-leading service and support. We
endeavour to be customer focused in every way right down to the detail, such as offering free
delivery on sales, covering the cost of warranty returns BOTH ways (plus supplying a loan
unit, if available) and supplying a free business tool with every order.
As well as the headline benefit of cost saving, second user offers shorter lead times, higher
reliability and multivendor solutions. Rental, of course, is ideal for shorter term needs and
offers fast delivery, flexibility, try-before-you-buy, zero capital expenditure, lower risk and off
balance sheet accounting. Both second user and rental improve the key business measure of
Return On Capital Employed.
We are based near Heathrow Airport in the UK from where we supply test equipment
worldwide. Our facility incorporates Sales, Support, Admin, Logistics and our own in-house
Lab.
All products supplied by Test Equipment Solutions include:
- No-quibble parts & labour warranty (we provide transport for UK mainland addresses).
- Free loan equipment during warranty repair, if available.
- Full electrical, mechanical and safety refurbishment in our in-house Lab.
- Certificate of Conformance (calibration available on request).
- Manuals and accessories required for normal operation.
- Free insured delivery to your UK mainland address (sales).
- Support from our team of seasoned Test & Measurement engineers.
- ISO9001 quality assurance.
Test equipment Solutions Ltd
Unit 8 Elder Way
Waterside Drive
Langley
Berkshire
SL3 6EP
T: +44 (0)1753 596000
F: +44 (0)1753 596001
Email: info@TestEquipmentHQ.com
Web: www.TestEquipmentHQ.com
SDH Edition
MP1570A
SONET/SDH/PDH/ATM Analyzer
1.5 Mbit/s to 10 Gbit/s
Comprehensive Testing of Core Networks from One Compact Portable Analyzer
Possible VC4-64c/OC-192c Measurements
and Bellcore standards, and supports concatenation
mapping, tandem connection, APS measurement, CID
measurement and pos measurement. The user can measure 1.5 Mbit/s to 10 Gbit/s signals using a single
MP1570A; previously, this required several measuring
instruments.
The MP1570A has a built-in printer and a 3.5-inch floppy
disk drive as standard output devices to print
measurement results, and to save and read measurement
data to and from the floppy disk (FD), which can also be
read on an external PC. The user can also save screen
data to the FD. The MP1570A has a "HELP" key function
that explains operations, functions and connections.
The MP1570A analyzer is designed for development,
manufacturing, construction, maintenance, and inspection
of SDH, SONET, PDH, and ATM equipment and networks.
A variety of plug-in units and options are available that
offer the flexibility to the users to configure various
analysis systems for different applications.
The MP1570A is scalable from 1.5 Mbit/s to 10 Gbit/s,
and has six slots to install the plug-in units required for
SDH and SONET tests at bit different rates. Installing the
appropriate combinations of plug-in units can also
perform ATM, jitter and wander tests conform to ITU-T
O.171/O.172.
The MP1570A conforms to the ITU-T recommendations
ATM
network
ATM
switch
ATM test
ADM
ADM
SONET
OC-1/3/12/48/192
ADM
Subscriber line
ADM test
ADM
Transmission
test
MUX/DEMUX test DS1
Optical
Electrical
DS2
DS3
Wireless
DSn
system
PDH
system
Cross
connect test
DXC
E1
E2
E3
E4
MUX/DEMUX test
ADM test
ADM
ADM
SDH
STM-0/1/4/16/64
ADM
Subscriber line
ADM
ATM test
2
ATM
switch
ATM
network
Conforming to Bit Rates from 1.5 Mbit/s to 10 Gbit/s in
a Single Unit
The MP1570A conforms to ITU-T Rec. G.703 (2, 8, 34, 139,
1.5, and 45 Mbit/s), G.703 and G.958 (52, 156, 622, 2,488, and
9,953 Mbit/s), and allows the user to select plug-in units for
different applications, including SONET, SDH, ATM, jitter and
wander tests.
Frequency and Optical Power Measurements
The MP1570A can measure received frequencies and display
measurement results in a graph. If an optical interface plug-in
unit is installed, the MP1570A can measure the absolute and
relative values of the optical power.
Concatenation Mapping
The MP1570A can perform SDH and SONET tests through the
mapping routes from VC4 to VC4-64c and can also core rooter
interface tests.
Jitter Generation and Measurement
The MP1570A can measure jitter tolerance and jitter transfer
characteristics in conformance with ITU-T Rec.
G.823/G.824/G.825/G.958, and Bellcore 253/499. It displays
the measurement results as numeric values and as a graph,
allowing the user to evaluate them easily.
Enhanced SDH and SONET Test Functions
The MP1570A can generate and detect CID patterns (ITU-T
Rec. G.958), Tandem Connection patterns (ITU-T Rec. G.707),
and Non-frame patterns. Also, APS switching time testing
(ITU-T Rec. G.707, G.783, and G.842), Overhead testing and
Alarm detection are supported.
Various wander generation functions (Option)
Various wander generations for evaluation are available: such
as TDEV wander tolerance measurement and TDEV wander
transfer characteristics measurement that were regulated by
ITU-T, ANSI, Bellcore, and ETSI.
Variable-type TDEV wander generation: All 38 types of TDEV
masks regulated by ITU-T, ANSI, Bellcore and ETSI are available as preset data. User-specified TDEV mask generation is
also available.
Phase transient: Changes the phase by an inclination of
A (1 – e –63.7t ). Moreover, the maximum phase shift quantity
can be set freely. (A: maximum phase shift)
Frame Memory and Capture (Option)
The MP1570A can be used to edit and analyze up to 64 frames
of data (or up to 26 frames of data at 10 Gbit/s).
IP-over-SONET/SDH (Option)
The IP/PPP packet generation/analysis function uses the frame
memory function: The Tx side transmits the SONET/SDH frame
data in which the IP/PPP packet is written to the payload
(Concatenation*). The Rx side captures the SONET/SDH
frame data into the frame memory (option), and analyses the
IP packet.
ATM Pattern Generation and Measurement
The MP1570A can test, not only the cell performance but also
measures the cell delay time, CDV, and cell traffic. For OAM
testing, it can generate and detect the AIS, RDI, and continuity
check cells for F4 and F5 flows. It can also generate loopback
and performance-monitoring cells which conform to ITU-T Rec.
I.610.
*STM-64c/OC-192c, STM-16c/OC-48c, STM-4c/OC-12c, STM-1c/OC-3c
Enhanced Through-Modes
The MP1570A enables the user to select one of the four
different types of through-modes that it offers: (1) Transparent,
(2) Overhead/Overwrite, and (3) Payload/Overwrite.
The user can also insert various errors and alarms into the
through signals.
IP-over-ATM (Option)
The IP packet generation/analysis function uses the ATM unit
cell memory function: The Tx side transmits the AAL5 data in
which the IP packet is written to AAL5 payload. The Rx side
captures the data of cells into the cell memory, and analyses
the IP packet.
Supports SDH, SONET, and Japan Modes in One
Frame (Option)
The MP1570A allows the user to set up the measurement of
SDH, SONET, and 384k Japan mapping in one frame.
The user can set a signaling pattern (multi-frame pattern of 8
frames or 64 frames) for Japanese mapping measurement.
Error Analysis (Error Performance)
The MP1570A enables the user to perform error measurement
conforming to ITU-T Rec. G.821, M.2100, G.826, M.2101,
M.2110, and M.2120.
3
2
1
3
4
5
6
7
8
9
10
11
12
14
18
4
13
15
16
17
1 Setup: Displays setup screen
2 Test Menu: Displays main test menu screen
3 Result: Displays main measurement results screen
13 Slot for interface unit
14 Clock Sync Output: Clock output synchronized with PDH or
SDH send clock
15 External Clock Input: PDH or SDH external send clock
4 Analyze: Displays main analysis screen
5 Cursor
input
16 Receiver Clock Output: Clock output synchronized with
Set: Sets data and opens windows for numeric, ASCII and
receiving data
17 DCC Interface: DCC clock output for send/receive, DCC
character input
Cancel: Cancels data setting and closes windows for
data I/O an overhead Add/Drop connector
18 External Interface: Any of the RS-232C, GPIB, Ethernet
numeric, ASCII and character input
<
numeric input window, the
and
<
<
<
< >: Move cursor or window cursor on screen. At the
interfaces can be selected as an option. In addition, an
keys increase and
optional VGA output can be installed for connecting an
decrease the numeric value, respectively.
external monitor.
6 Start/Stop: Starts and stops measurement
7 Alarm: Inserts alarms (The alarm target is selected at the
19 Printer
20 Floppy disk drive
Manual screen.)
8 Error: Inserts errors (The error target and single/rate are
21 Slots for plug-in units
22 DCS Input: Data/clock input for SDH output synchronization
23 Trigger Input: Input for APS and each capture measurement
selected at the Manual screen.)
9 Help: Displays help screen
10 Alarm/Error: Displays receiver alarms/errors, clock loss,
24 Trigger Output: Output for error alarm detection,
send/receive frame or clock
25 Orderwire: Modular jack for connecting orderwire headset
and power fail measurement results
11 Printer: Prints screen at built-in or external printer
12 Screen Copy: Outputs screen in bitmap format to floppy
disk
19
20
21
22
5
23 24 25
SDH, SONET and PDH Measurement
Measurement at Bit Rates from 1.5 Mbit/s to 10 Gbit/s
A mapping route to a bit rate of up to 10 Gbit/s can be set.
The MP1570A mainly supports SDH, SONET, Japanese
mapping, PDH of the European system and DSn of the North
American system for digital communications. For concatenation
mapping, a route can be set from STM-1c up to STM-64c.
Furthermore, the MP1570A supports a combination of channels.
For example, 64 channels of VC4c, 16 channels of VC4-4c, and
four channels of VC4-16c.(See figure 1 in page 20)
Mapping
Overhead Setting and Testing
The user can modify and capture the overhead, and test the
overhead portion with overhead change, pointer 64 frames,
overhead add/drop and overhead bit errors.
Overhead preset
Overhead monitor
Overhead test-1
Overhead test-2
6
APS Function
The user can test the automatic protection switch (APS) by
measuring the equipment switching time accurately in
milliseconds. The MP1570A also conforms to ITU-T Rec.
G.783 and G.841.
Mixed Payload
At mapping measurement in TUG-3 and AU3, the user can set
different mapping for three additional channels other than the
target measurement channel.
Mixed payload setting
APS program data
Tandem Connection
The N1 and N2 bytes can be set and measured.
APS test sub-screen
Tandem
APS capture
Overhead monitor (Tandem)
7
Various Analysis Functions
The internal optical power meter and frequency counter allows
the user to measure optical power and frequency during error
and alarm measurement. (Photo A)
The MP1570A can capture any SOH or POH (1 byte), K1/ K2
byte, or H1/H2 byte in 1023 frames to analyze errors and
alarms, and check APS operation. (Photo B)
Measured errors and alarms can be displayed as a graph with
a time scale in 1 second, 1 minute, 15 minutes, or 60 minutes.
(Photo C)
Pointer Value Monitoring
Changes in pointer value can be displayed as a graph with
values updated in real time.
Pointer monitor
A: Optical power meter
B: Overhead capture
C: Error/alarm
8
MUX/DEMUX Function (Option)
When the MUX/DEMUX option is added, the multiplexing
structure including the frame alignment signal can be
generated, and multiplexer/demultiplexer measurement can be
performed.
Non Frame Pattern/CID Pattern
Frames can be set on/off at all bit rates. CID pattern can
generate or analysis at SDH/SONET measurement.
STM
C4
C3
C2
C12
C11
45 Mbit/s
6M
Dummy 1.5M
45M
139 Mbit/s
1.5M
Dummy 384k
384k
139M
1.5 Mbit/s
Dummy 6M
Dummy 2M
34M
8M
2M
34 Mbit/s
8 Mbit/s
N ✕ 64k
Dummy 34M
2 Mbit/s
Dummy 8M
Dummy 2M
Through Modes
One of the three through modes can be selected: (1)
Transparent,
(2) Overhead/Overwrite, and (3) Payload/Overwrite.
The external DS1/DS3/PDH signal can be added/dropped
● Transparent
● Payload Overwrite
Insertion of internal STS-3SPE/VC4, VT6/TU2, VT2/TU12,
VT1.5/TU11 signals
For in-service monitoring
Rx
Rx
Tx
Tx
● Overhead Overwrite
● Add/Drop
Add/Drop of external DS1, DS3, PDH signals
Modification of SOH/POH byte. Addition of various errors/alarms.
Rx
External
DS1/DS3/PDH
Tx
9
Easily operated pointer sequence test
(combined jitter measurement)
Able to generate the justification pattern conforming to ITU-T
G.783 from the transmission equipment side, and simultaneously make the tributary signal offset variable. This makes the
combined jitter test possible.
Enhanced Error/Alarm Simulation
The MP1570A can generate normal and abnormal frames alternately to test the frame synchronization function of terminal
equipment. (This is an SDH FAS error addition function.)
Normal frame word (N)
N=1 to 15
Abnormal frame word (M)
M=0 to 15
Pointer sequence +
payload offset
Alternative
STM-N
Example of FAS error
PDH
MP1570A
Jitter data
Combined jitter measurement
10
1.5M
2M
8M
34M
45M
139M
Jitter and Wander
Automatic Measurement with Easy-to-Understand
Graphs
Jitter tolerance, jitter transfer and jitter frequency can all be
measured automatically. And since the data can be saved to
floppy disk in the text format, data management is made simple
by using a personal computer.
Masks conforming to ITU-T Rec. G.823/G.824/G.825/G.958 are
provided as preset data. Measurement is performed simply by
pressing the start key. Furthermore, the operator can also set
any other mask as necessary.
Jitter transfer measurement that is able to set
the selective bandwidth
In jitter standard such as ITU-T, ANSI, Bellcore, and ETSI, the
bandwidth selective regulation is still unclear for jitter transfer
measurement evaluation. This equipment selects the bandwidth selection at the jitter transfer measurement in the range
of 1 to 30 Hz. It responds immediately when the standard such
as ITU-T, is reconsidered.
Extended jitter quantity and frequency shift monitoring
Able to measure jitter/wander and error/alarm at the same time,
so that the relationship of error/alarm generation and jitter can
be analyzed.
Through jitter function (only SONET/SDH)
Able to generate the jitter by through, while monitoring the input
jitter quantity.
Input signal
Rx jitter
measurement
Tx jitter
generation
Output signal
Variable-type jitter measurement filter based on DSP
(up to 622 Mbit/s jitter measurement)
Filters regulated by ITU-T G series, such as ITU-T
O.171/O.172, ANSI, Bellcore, and ETSI are available as preset
data. The user can set the setting value of the filter freely and
analyze the cause of jitter trouble.
Mapping Jitter Measurement Method
Mapping jitter can be measured just by making a simple connection with the MP1570A.
2/34/139/1.5/45M
Variable filter
MP1570A
ADM SDH
ADM
1.5 MHz/1.5 Mbit/s signal
2 MHz/2 Mbit/s signal
HP
LP
Jitter measurement bandwidth(Hz)
11
Wander Conforming to ITU-T Rec. G.823/G.824/G.825
Since MP1570A can generate wander [up to 57,600 UIp-p/10 µHz
(at 2488M)], jitter and wander tolerance mask evaluation
conforming to ITU-T Rec. G.823/G.824/G.825 is possible.
(usable wander tolerance mask at manual measurements)
Various wander application software
It is possible to perform MTIE and TDEV measurements on
real time by MX150001B wander application and external PC.
Various wander measurements can also be performed, such as
hold over, wander tolerance (TDEV), and wander transfer
characteristics (TDEV).
Real time wander measurement: Real time wander
measurements, such as frequency offset, frequency drift rate,
MTIE, TIE, and TDEV
Wander tolerance (TDEV) measurement: Evaluates the
wander tolerance by TDEV wander modulation
Wander transfer (TDEV) measurement: Evaluates the wander
transfer characteristics by TDEV wander modulation
Jitter or wander amplitude (p-p)
A0
A1
Slope:20 dB/decade
A2
A3
A4
f0
f12 f11
f10 f9
f8 f1
f2 f3
f4
Jitter frequency
MTIE/TDEV Measurement
MTIE/TDEV analysis can be performed by running the MX150001B
Application Software on an external personal computer. Data
collected in the field can be saved to floppy disk and taken to
the office for easy analysis and
MX150001B
management on a computer.
Wander (MTIV, TDEV)
Measurement Application
Software
CSM
PC
[GPIB or RS-232C]
1.5 MHz signal
Wander
reference input
SDH/SONET data
NE
SDH/
SONET
network
NE
CSM: Clock Supply Module
NE: SDH/SONET Network Element
MP1570A
12
IP-over-SONET/SDH
Programs IP/PPP at will, transmits it, picks PPP packet from
capture memory (option), and displays it. And supports
high-speed POS router evaluation.
PPP packet capture and display
Samples PPP packet from the capture memory, and displays IP
header. Detects FCS error and displays it in red.
IP/PPP header setting
Able to set the value of each header optionally when selecting
IPv4 or IPv6. Calculates FCS or header checksum
automatically.
Packet data list
PPP packet transmission and real time count
Transmits the three types of packets (can be set separately) by
optional sequence (the idle length between each packet can be
set simultaneously.). Displays the number of Tx packets and
Rx ppp packets at real time.
Detail packet data
13
IP-over-ATM
Programs IP in the AAL5 payload at will, transmits it, picks the
IP packet from the cell capture memory, and displays it. And
supports ATM router evaluation.
IP packet capture and display
All IP packets (maximum 2016 packets) captured into the cell
memory are displayed.
IP header setting
Able to select IPv4 or IPv6, and set the value of each header at
will. Calculates header checksum automatically.
Packet data list
IP packet transmission
At ATM/AAL5 testing, it transmits the edited IP packet by just
setting AAL5.
Detail packet data
14
ATM
Supports ATM from 1.5M to 622M rates
TC layer mappings of 622M, 156M, 52M, 139M, 45M, 34M, 2M
and 1.5M are supported along with ATM mappings of O.191,
AAL1, AAL2, AAL3/4, and AAL5, which makes the MP1570A
ideal for various combinations of layers.
Cell header
CPCS Layer Data Creation
The cell format supports both ATM (O.191, user program) and
each AAL type. PRBS, word pattern, edit pattern, and time
stamp can be inserted as the payload for each format.
In particular, CPS packet editing is possible for AAL2, and
CPCS-PDU editing is also possible for AAL3/4 and AAL5.
In addition, CBR, burst, Poisson, and sawtooth waveforms can
also be selected as the cell generation timing, making the traffic
appear even more like an actual line.
Payload
ATM (user program )
ATM (O.191)
SN
TS
TCPT
Payload
CRC16
Payload
AAL1
CSI
SN
SNP
OSF
SN
P
UUI
HEC
Pointer
Payload
AAL2
CID
LI
PPT
SN
MID
PAD
CID
Payload
LI
PPT
UUI
HEC
Payload
AAL3/4
ST
CPI
B tag
LI
BA size
ST
CRC10
Payload
SN
MID
PAD
PAD
AL
E tag
LI
Length
AAL5
Payload
PAD
15
CPCS-UU
CPI
Length
CRC10
CRC10
Simultaneous Monitoring of 1023 Channel Cells and
Non-conforming Cells
The VPI/VCI for 1023 channels can be detected automatically,
and the presence/absence of alarms, cell count, and non-conforming cell count can be displayed graphically, for easy comparison of line channel traffic.
Simultaneous Display of Error Cells, Inserted Error
Cells and Lost Cells
The error/alarm generation conditions can be displayed both
numerically and graphically to give a visual impression of the
traffic conditions.
1- and 2-Point CDV in Conformance with I.356
When measuring delay in cell traffic, either 1-point CDV or
2-point CDV conforming to ITU-T Rec. I.356 can be selected
according to the conditions.
Traffic Monitoring
The constantly changing traffic can be displayed as a graph for
the selected-one-channel VPI/VCI.
16
Specifications
• MP0121A 2/8/34/139/156M*1 Unit
Bit rate
2.048, 8.448, 34.368, 139.264 Mbit/s
Level/waveform
Conforms to ITU-T G.703 (with 20 dB monitoring point)
Connectors
BNC (75 Ω, unbalanced), 3-pin Siemens (120 Ω, balanced)
2.048 Mbit/s: HDB3 (balanced/unbalanced)
8.448, 34.368 Mbit/s: HDB3 (unbalanced)
139.264 Mbit/s: CMI (unbalanced)
Clock
Internal (accuracy: ±7 ppm, jitter unit not installed), external (ECL [AC] 50 Ω), received signal
Frame format
Unframed: 2, 8, 34, 139 Mbit/s
Framed: 2 Mbit/s (with/without CRC-4 at channels 30/31, G.704), 8 Mbit/s (G.742), 34 Mbit/s (G.751), 139 Mbit/s (G.751),
MUX/DEMUX (Option 06)
Test patterns
PRBS: 211 – 1, 215 – 1, 220 – 1, 223 – 1 (O.151)
Invert: On/off
Word: 16-bit programmable, all 0, all 1
Error addition
Bit (all, test pattern), code, E-bit
Timing: Single, rate (1E– 3, 1E– 4, 1E– 5, 1E– 6, 1E– 7)
FAS: n in 16 (n: 1 to 4), all
Alarm addition
LOS, LOF, AIS, RDI, RDI (MF)
Timing: All
Measurements
Mode: Single, repeat, manual
In-service
Errors: Frame, code, CRC-4, E-bit
Alarms: Power-fail, LOS, AIS, LOF, MF loss, RDI, RDI (MF)
Error performance: G.821 (inc. Annex D), M.2100, G.826
Out-of-service
Errors: Frame, code, CRC-4, E-bit, bit
Alarms: Power-fail, LOS, AIS, LOF, MF loss, RDI, RDI (MF), sync loss
Error performance: G.821 (inc. Annex D), M.2100, G.826
LEDs
LOS, AIS, LOF, MF loss, RDI, RDI (MF), sync loss, errors
Monitor
Frame word
Trouble search
Auto search for errors/alarms in all measured channels
Delay measurement
0 to 1 s
Auxiliary interface
Clock sync output, frame sync output, error output
*1: Built-in 156M CMI (electrical) interface
17
• MP0122A 1.5/45/52M*1 Unit, MP0122B 1.5/45/52/52M*2 (1.31) Unit
Bit rate
1.544, 44.736 Mbit/s
Level/waveform
1.544 Mbit/s: ANSI T1.102 (with 20 dB monitoring point), 0/655 ft
44.736 Mbit/s: ANSI T1.102 (with 20 dB monitoring point), 0/450/900 ft
Connectors
BNC (75 Ω, unbalanced), Bantam (100 Ω, balanced)
1.544 Mbit/s: AMI/B8ZS (balanced), 44.736 Mbit/s: B3ZS (unbalanced)
Clock
Internal (accuracy: ±7 ppm, jitter unit not installed), external (ECL [AC] 50 Ω) received signal
Frame format
Unframed: 1.5, 45 Mbit/s
Framed: 1.5 Mbit/s (D4, ESF, Japan ESF*3), 45 Mbit/s (M13, C-bit), MUX/DEMUX (Option 07)
Test patterns
PRBS: 211 – 1, 215 – 1, 220 – 1 (zero suppress), 220 – 1, 223 – 1 (O.151)
Invert: On/off
Word: 16-bit program, all 0, all 1, 3 in 24 (1.5 Mbit/s)
Error addition
Bit (all, test pattern), code, parity, CRC-6, C-bit, REI
Timing: Single, rate (1E– 3, 1E– 4, 1E– 5, 1E– 6, 1E– 7)
FAS (45 Mbit/s): n in 16 (n: 1 to 4), all
X-bit setting
00, 01, 10, 11
Alarm addition
LOS, LOF, AIS, RDI
Timing: All
Measurements
Mode: Single, repeat, manual
In-service
Errors: FAS, code, parity, CRC-6, C-bit, REI
Alarms: Power-fail, LOS, AIS, LOF, RDI
Error performance: G.821 (inc. Annex D), M.2100, G.826
Out-of-service
Errors: FAS, code, parity, CRC-6, C-bit, REI, bit
Alarms: Power-fail, LOS, AIS, LOF, RDI, sync loss
Error performance: G.821 (inc. Annex D), M.2100, G.826
LEDs
LOS, LOF, AIS, RDI, sync loss, errors
Trouble search
Auto search for errors/alarms in all measured channels
Delay measurement
0 to 1 s
Auxiliary interface
Clock sync output, frame sync output, error output
52M B3ZS (electrical) interface
*1:2: Built-in
52M B3ZS (electrical) and optical interfaces
*3: Built-in
Mounted Option 09 (Japan mapping)
*
18
• 52/156/622/2488/9953M
Bit rate
51.84, 155.52, 622.08, 2488.32, 9953.28 Mbit/s
Level/waveform
52M (electrical: B3ZS)*1: ANSI T1.102, 0/450 ft
52M (optical): As per MP0122B unit optical interface specifications
156M (electrical: CMI)*2: ITU-T G.703
156M (optical): As per optical 156M/622M unit specifications
622M (electrical/optical): As per optical 156M/622M unit and NRZ unit specifications
2488M (electrical/optical): As per 2.5G unit and 2.5G/10G unit specifications
9953M (electrical/optical): As per 2.5G/10G unit specifications
Clock
Internal (accuracy: ±3.5 ppm, jitter unit not installed), Lock (2 MHz, 1.5 MHz, 64 kHz + 8 kHz, 2 Mbit/s, 1.5 Mbit/s),
external (ECL [AC] 50 Ω, 9953M: 1.02 to 0.58 Vp-p, 50 Ω), received signal
Frame
SDH/SONET, CID pattern, non-frame
Mapping
See Fig. 1
Through
Trance parent, over head overwrite, payload overwrite
Test patterns
PRBS: 211 –1, 215 –1, 220 –1 (zero suppress, MP0122A/B installed), 220 –1, 223 –1, 231 –1 (only concatenation mapping 16c/64c,
conform to O.151)
Invert: On/off
Word: 16-bit programmable, all 0, all 1
Error addition
Bit all (all, test pattern), FAS, B1, B2, B3, BIP-2, MS-REI, HP-REI, LP-REI
Timing: Single, single (burst) bit (1 to 64000), rate (1E– 3, 1E– 4, 1E– 5, 1E– 6, 1E– 7, 1E– 8, 1E– 9)
User program AE-B [A: 1.0 to 9.9 (step: 0.1), B: 2 to 10]
Alternative: Error frame (0 to 8000), normal frame (1 to 8000)
Alarm addition
LOS, LOF, MS-AIS, MS-RDI, AU-AIS, AU-LOP, HP-SLM, HP-TIM, HP-RDI, HP-UNEQ, TU-AIS, TU-LOP, TU-LOM, LP-SLM,
LP-TIM, LP-RDI, LP-UNEQ, LP-RFI
Timing: Single, single (burst) frame
Alternative: Alarm frame (0 to 8000), normal frame (1 to 8000), all
Measurements
Mode: Single, repeat, manual
In-service/Out-of-service
Errors: B1, B2, B3, BIP-2, MS-REI, HP-REI, LP-REI
Alarms: Power-fail, LOS, LOF, OOF, MS-AIS, MS-RDI, AU-AIS, AU-LOP, HP-SLM, HP-TIM, HP-RDI, HP-UNEQ, TU-AIS,
TU-LOP, TU-LOM, LP-SLM, LP-TIM, LP-RDI, LP-UNEQ, LP-RFI
Error performance: G.826, M2101, M2110, M2120
Preset: Alarm measurement condition
LEDs
LOS, LOF, OOF, MS-AIS, MS-RDI, AU-AIS, AU-LOP, HP-RDI, HP-SLM, TU-AIS, TU-LOM, TU-LOP, LP-RDI, LP-RFI, LP-SLM,
Tandem, sync. loss, errors
Tandem connection
N1 byte (Type 1, Type 2), N2 byte
Errors: N2 BIP-2, TC-REI, OEI, IEC
Alarms: VC-AIS, ISF, FAS, HP-Incoming-AIS, HP-TC-RDI, HP-ODI, LP-Incoming-AIS, LP-TC-RDI, LP-ODI
Justification
AU pointer, TU pointer, C, C1/C2
Measurement: NDF, +PJC, –PJC, Cons, C, C1/C2
Monitor
SOH, POH, K1/K2, pointer, path trace (TIM alarms detectable), Tandem, payload
Pointer sequence
Signal of opposites polarity, regular with double, regular with missing, double of opposites polarity, 87-3/26-1 (normal, add,
cancel), continuous pattern (normal, add, cancel), single pointer adjustment, maximum rate pointer burst, phase transient pointer
burst, initialize period polarity, cooldown period
Over head capture
SOH/POH (any 1 byte), H1/H2, K1/K2
Dummy channel setting
Payload: Dummy, copy, mixed payload
Setting: POH, pathtrace, SS bit, Tandem
Simultaneous measurement
VC2, VC12, VC11
Trouble search
Auto search for errors/alarms in all measured channels
Delay
Measurement period: 0.5, 1, 2, 5, 10 s
Measurement range: 0 to 999 µs, 1.0 to 999.9 ms, 1.0 to 10.0 s, time out
Display accuracy: ±5 µs (0.5, 1 s), ±50 µs (2, 5, 10 s)
APS (K1/K2)
Switching time measurement
Measurement range: 1 to 2000 ms, >2000 ms
Trigger
Internal: B1, B2, B3, BIP-2, MS-REI, HP-REI, LP-REI, MS-AIS, AU-AIS, AU-LOP, HP-RDI, TU-AIS, TU-LOM, TU-LOP, LP-RDI,
LP-RFI, Bit
External: Measures trigger input signal (active high)
Threshold: Specify non-error alarm between 1 ms, 10 ms, 100 ms
Sequence generation: 2 to 64 word, repeat (8000 frame)
Sequence capture: 2 to 64 word, repeat (8000 frame)
Frequency measurement
Range: ±100 ppm, Accuracy: ±3.5 ppm (jitter unit not installed)
Over head test
OH change: SOH/POH 1 byte, K1/K2, RSOH, MSOH, SOH, POH (except B1, B2, B3, BIP-2)
PTR 64 frame: AU pointer, TU pointer
Timing: Single, repeat (2 to 64)
Setting: PTR, NDF, +PJC, –PJC
OH BERT: SOH/POH 1 byte (exclude B1, B2, B3, BIP-2), D1-D3, D4-D12
Test pattern: 211 –1, 215 –1
OH add/drop: SOH/POH 1 byte, D1-D3, D4-D12 (exclude B1, B2, B3, BIP-2 additional type)
19
Japan mapping (option 09)
VC11 Signaling (8-multiframe, 64-multiframe setting)
Frame memory/capture
Memory size: 64 frame (156M, 622M, Option 13), 64 frame (MU150008A-01/150009A-01/150010A-01, 2.5G),
26 frame (MU150000A-01, 2.5G/10G)
Insert/extract
Bit rate: 10G (52M, 156M), 2.5G (52M, 156M)
Payload offset
±100 ppm/0.1 ppm step
Auxiliary interface
Clock sync output, trigger input, trigger output, DCC interface (V.11), orderwire, receive clock output
MP0122A/B
*1:2: Mounted
Mounted MP0121A
*
• General
Printer
Internal, external
Internal memory
Measurement settings memory: 10, Graphics memory: 15
Others
FDD, RS-232C (Option 01)*1, GPIB (Option 02)*1, Ethernet (Option 03)*1, video output (Option 04)*1, buzzer, clock, help, screen copy
EMC
EN61326: 1997/A1, 1998 (Class A)
EN61000-3-2: 1995/A2, 1998 (Class A)
EN61326: 1997/A1, 1998 (Annex A)
LVD
EN610101-1: 1993/A2, 1995 (Installation Category ΙΙ, Pollution degree 2)
Dimensions and mass
320 (W) x 177 (H) x 350 (D) mm, 10 kg approx. (excluding plug-in units and options)
Power
100 to 240 Vac, 47.5 to 63 Hz, ≤500 VA
Temperature
0˚ to +40˚C
video output, RS-232C, GPIB and Ethernet options cannot all be used simultaneously.
*1: The
Only the video output + RS-232C, or video output + GPIB, or RS-232C + GPIB board, or Ethernet board combinations support simultaneous use, so
change the board combinations according to the purpose.
STM-64
x 64
STM-16
x 16
x4
AU-4
AUG
139M (Async.)∗1
VC-4
Bulk∗1
x3
STM-4
TUG-3
x3
STM-1
TU-3
VC-3
STM-0
AU-3
34M (Async.)∗1
34M (Sync.)∗1
x7
45M (Async.)∗3
VC-3
Bulk∗3
x7
TU-2
TUG-2
VC-2
Bulk
6M (Async.)
x3
6M (Bit sync.)
mc
TU-12
VC-12
2M (Async.)∗1
2M (Bit sync. F)∗1
2M (Bit sync. L)∗1
2M (Byte sync. F)∗1
x4
2M (Byte sync. L)∗1
Bulk∗1
TU-11
VC-11
1.5M (Async.)
1.5M (Bit sync. F)
1.5M (Bit sync. L)
1.5M (Byte sync. F)
1.5M (Byte sync. L)
∗1: Requires MP0121A
∗2: Requires Japan mapping (Option 09)
∗3: Requires MP0122A/B
∗4: Requires MU150000A
∗5: Requires MU150000A, MU150008A, MU150009A or MU150010A
STM-64c∗4
STM-16c∗4,∗5
STM-4c
STM-1c
x4
x4
384k (data)∗2
384k (voice)∗2
Byte (data)∗2
Byte (voice)∗2
Bulk
VC4-64c
x4
Bulk
VC4-16c
Bulk
VC4-4c
Bulk
VC4
Bulk
Fig. 1 Mapping structure
20
• IP-over-SONET/SDH (option) *1
Bit rate
155.52, 622.08, 2488.32, 9953.28 Mbit/s
PPP setting (RFC1662)
Flag, address, control: Any settable
Protocol: 8/16 bit selectable and any settable
FCS: 16/32 bit selectable and auto calculate
Information: IPv4/IPv6 selectable and any settable
IPv4 setting (RFC0791)
Any setting: Version, IHL, TOS, total length, ID, flags, flagment offset, TTL, protocol, address (source, destination)
Header checksum: Auto calculate
Data byte: All 0, all 1, 8 bits program, single PRBS 7, user program (max. 65535 byte)
IPv6 setting (RFC1883)
Any setting: Version, priority, flow label, payload length, next header, hop limit, address (source, destination)
Data byte: All 0, all 1, 8 bits program, single PRBS 7, user program (max. 65535 byte)
Packect transmission
setting
1 to 3 in IP/PPP (independently), IP/PPP sending pattern, packet sending interval (max. 100000 bytes), single/repeat, sending on/off,
scramble (X 43 + 1) on/off, control escape auto insertion, FCS error insertion (single), number of packet count display
Packet receiving/analysis PPP frame calculation (count), scramble (X 43 + 1) on/off setting, automatic analysis of control escape. Frame/capture memory
(option) required data captured into the capture memory (max. 64 frames*2), IPv4/IPv6 select, IP address filter set
frame/capture memory (option) is required.
*1:2: The
* Max. 26 frames at 2488/9953 Mbit/s when MU150000A is inserted.
• IP-over-ATM (option) *3
Bit rate
155.52, 622.08 Mbit/s
AAL5 edit pattern
IPv4/IPv6 selectable
IPv4 setting (RFC0791)
Any setting: Version, IHL, TOS, total length, ID, flags, flagment offset, TTL, protocol, address (source, destination)
Header checksum: Auto calculate
Data byte: All 0, all 1, 8 bit program, single PRBS 7, user program (max. 65535 bytes)
IPv6 setting (RFC1883)
Any setting: Version, priority, flow label, payload length, next header, hop limit, address (source, destination)
Data byte: All 0, all 1, 8 bits program, single PRBS 7, user program (max. 65535 bytes)
Packet sending
Follow with AAL5 distribution setting
Packet receiving/analysis Displays the IP packet from the data captured into cell capture memory (max. 2016 cells), IPv4/IPv6 selectable
*3: MP0123A ATM Unit is required.
21
• MU150005A/150006A/150007A Jitter Units
Bit rate
MU150005A: 2.048, 8.448, 34.368, 139.264, 155.52, 622.08 Mbit/s
MU150006A: 1.544, 44.736, 51.84, 155.52, 622.08 Mbit/s
MU150007A: 1.544, 2.048, 8.448, 34.368, 44.736, 139.264, 51.84, 155.52, 622.08 Mbit/s
Conform to ITU-T O.171/O.172
Modulation frequency: 0.1 Hz to 6 MHz
Amplitude: 0 to 404.0 UIp-p
Resolution:0.001 UIp-p (2 UI range), 0.01 UIp-p (16 UI range), 0.1 UIp-p (80 UI range), 0.2 UIp-p (400 UI range)
[UIp-p]
400 Ul range
400.0
–20 dB/dec
80 Ul range
400 Ul range
80 Ul range
16 Ul range
2 Ul range
Jitter modulation
80.8
–20 dB/dec
16 Ul range
16.16
–20 dB/dec
2 Ul range
2.020
–20 dB/dec
0.60
0.50
0.20
f1
Jitter generation
Bit rate
(Mbit/s)
1.544
2.048
8.448
34.368
44.736
139.264
51.84
155.52
622.08
f1
(Hz)
130
300
1.1k
2.5k
2.5k
9k
2.5k
7.5k
3k
f2
(Hz)
630
1.5k
5.5k
13k
13k
45k
13k
38k
15k
f2
f3
f4
Modulation frequency
f5
f6 f7
(Hz)
f3
f4
f5
f6
f7
(kHz) (kHz) (kHz) (kHz) (kHz)
3.2
25
—
100
—
7.5
60
—
240
—
28
220
—
880
—
63
500
—
—
5000
63
500
—
—
5000
230 1800 6000
—
—
63
500
—
—
5000
190 1500
—
6000
—
75
600
—
—
6000
Accuracy
2 UI range: (±Q% of setting) ±0.02 UIp-p, 16 UI range: (±Q% of setting) ±0.2 UIp-p, 80 UI range: (±Q% of setting) ±1.2 UIp-p,
400 UI range: (±Q% of setting) ±6 UIp-p
Bit rate (Mbit/s)
1.544
2.048
8.448
34.368
44.736
139.264
51.84
155.52
622.08
Error Q
±12%
±8%
±12%
±8%
±12%
±8%
±12%
±8%
±12%
±12%
±8%
±12%
±8%
±12%
±15%
±12%
±8%
±12%
±8%
±12%
±12%
±8%
±12%
±15%
Frequency range
0.1 to 2 Hz
2 Hz to 100 kHz
0.1 to 10 Hz
10 Hz to 240 kHz
0.1 to 20 Hz
20 Hz to 880 kHz
0.1 to 100 Hz
0.1 to 500 kHz
500 kHz to 5 MHz
0.1 to 2 Hz
2 Hz to 5 MHz
0.1 to 100 Hz
0.1 to 500 kHz
0.5 to 2 MHz
2 to 6 MHz
0.1 to 300 Hz
300 Hz to 5 MHz
0.1 to 500 Hz
0.5 to 500 kHz
0.5 to 6 MHz
0.1 Hz to 1 kHz
1 to 500 kHz
0.5 to 2 MHz
2 to 6 MHz
22
Frequency offset
Auxiliary interface
Range: ±999.9 ppm/0.1 ppm steps (jitter off), ±100 ppm/0.1 ppm steps (jitter on/off)
Accuracy: ±0.1 ppm after power-on, calibrates after 60 min warm-up, 23˚ ±5˚C
External modulation input, External 5/10 MHz reference input, Jitter clock/Jitter reference output, Wander reference output
Conform to ITU-T O.171/O.172
Modulation frequency: 0.1 Hz to 5 MHz
Amplitude: 0.0 to 400 UI (800 UI: at 622M)
Resolution:
0.001 UIp-p/0.001 UIrms (2 UI range), 0.01 UIp-p/0.01 UIrms (8 UI/20 UI range), 0.2 UIp-p (400 UI range), 0.5 UIp-p (800 UI range)
Jitter measurement
[UIp-p]
[2/8 UI range]
A2
A1
F1
F2
F3
F4
Modulation frequency (Hz)
A1
Bit rate (UIp-p)
(Mbit/s)
—
F1∗
(Hz)
A2
(UIp-p)
F2
(Hz)
F3
(Hz)
F4
(Hz)
Full
Wide
Full
Wide
Full
Wide
—
—
8
2
0.1
10
1.25k
5k
20k
40k
8
2
0.1
10
3.75k
15k
60k
100k
—
2
—
10
—
50k
200k
400k
8
2
0.1
10
18.75k
75k
300k
800k
0.5
8
2
0.1
10
25k
100k
400k
400k
139.264
0.5
8
2
0.1
10
50k
200k
800k
3.5M
51.84
0.5
8
2
1
10
25k
100k
400k
400k
155.52
0.4
8
2
1
10
25k
100k
500k
1.3M
622.08
0.3
8
2
1
10
75k
300k
2M
5M
1.544
0.5
2.048
0.5
8.448
0.5
34.368
0.5
44.736
∗F1 = 100 Hz at RMS
Jitter measurement
Jitter measurement
[UIp-p]
Bit rate
(Mbit/s)
[20 Ul range]
20
∗(7.07)
A1
F1
F2
Modulation frequency (Hz)
F3
F4
Jitter measurement
F2
Modulation frequency (Hz)
F3
Full
Wide
—
—
—
0.1
1
600
15k
15k
2.048
1.67
0.1
1
1.5k
18k
18k
8.448
1.43
0.1
1
5k
70k
70k
34.368
0.5
0.1
1
8k
300k
300k
44.736
0.5
0.1
1
10k
400k
400k
139.264
0.5
0.1
1
20k
800k
1.2M
51.84
0.5
1
1
10k
400k
400k
155.52
0.4
1
1
10k
500k
1.3M
622.08
0.3
1
1
30k
2M
5M
F2
(Hz)
F3
(Hz)
= 100 Hz at RMS
1.544
20
400
0.1
10
200
2.048
20
400
0.1
10
200
8.448
20
400
0.1
10
200
34.368
20
400
0.1
10
200
44.736
20
400
0.1
10
200
139.264
20
400
0.1
10
200
51.84
20
400
0.1
10
200
155.52
4
400
0.1
10
1k
622.08
4
800
0.1
10
2k
∗∗:
23
F4
(Hz)
—
A1
F1
F3
(Hz)
0.67
Bit rate
A1
A2
F1∗∗
(Mbit/s) (UIp-p) (UIp-p) (Hz)
[400/800 Ul range]
A2
F2
(Hz)
1.544
∗F1
[UIp-p]
F1∗
(Hz)
A1
(UIp-p)
Full band only
Filter:
Conform to O.171/O.172, LP, HP0 + LP, HP1 + LP, HP2 + LP, HP + LP, user
Bit rate HP0 HP1 HP2 HP2' HP
LP
(Mbit/s) (Hz) (Hz) (Hz) (Hz) (Hz) (Hz)
1.544
10
10
8k
—
12k
40k
2.048
10
20
18k
700
12k
100k
400k
8.448
10
20
3k
80k
12k
34.368
10
100
10k
—
12k
800k
44.736
10
10
30k
—
12k
400k
139.264
10
200
10k
—
12k
3.5M
51.84
10
100
20k
—
12k
400k
155.52
10
500
65k
—
12k
1.3M
622.08
10
1k
250k
—
12k
5M
Accuracy (UIp-p, UI+p, UI-p)
2 UI range: ±R% of reading ±W UIp-p, 20 UI range: ±R% of reading ±W UIp-p, 400 UI range: ±R% of reading ±W UIp-p,
800 UI range: ±R% of reading ±W UIp-p
Fixed error [W]
UIp-p
Pseudo-random signal
Bit rate
HP1 + LP
(Mbit/s)
8 UI
20 UI 400/800 UI
1.544
0.040
0.08
0.22
2.048
0.040
0.08
0.22
8.448
0.040
—
34.368
0.040
44.736
139.264
Bit length
2 UI
8 UI
20 UI
3.5
0.025
0.05
0.15
3.5
0.025
0.05
0.15
215 – 1
0.22
3.5
0.025
—
0.15
215 – 1
0.08
0.22
3.5
0.025
0.05
0.15
223 – 1
0.040
0.08
0.22
3.5
0.025
0.05
0.15
215 – 1
0.040
0.08
0.30
5.0
0.025
0.05
0.15
223 – 1
220 – 1
Clock signal
Bit rate
HP1 + LP
(Mbit/s)
Jitter measurement
HP2 + LP
2 UI
HP2 + LP
2 UI
8 UI
20 UI 400/800 UI
2 UI
1.544
0.015
0.03
0.10
8 UI
20 UI
1.6
0.010
0.02
2.048
0.015
0.03
0.08
0.10
1.6
0.010
0.02
8.448
0.015
0.08
—
0.10
1.6
0.010
—
0.08
34.368
44.736
0.030
0.06
0.18
2.8
0.020
0.04
0.15
0.030
0.06
0.18
2.8
0.020
0.04
139.264
0.15
0.030
0.06
0.22
3.8
0.020
0.04
0.20
SONET/SDH signal
Bit rate
HP1 + LP
(Mbit/s)
HP2 + LP
2 UI
8 UI
20 UI 400/800 UI
51.84e
0.070
0.14
0.30
51.84o
0.070
0.14
0.30
155.52e
0.070
0.14
0.30
155.52o
0.070
0.14
622.08
0.100
0.20
Container
2 UI
8 UI
20 UI
5.0
0.050
0.10
0.20
5.0
0.050
0.10
0.20
VC3
5.0
0.025
0.05
0.20
VC4
0.30
5.0
0.050
0.10
0.20
VC4
0.30
10.0
0.050
0.10
0.20
VC4-4c
VC3
At PRBS 223 – 1
Clock signal
Bit rate
HP1 + LP
(Mbit/s)
HP2 + LP
2 UI
8 UI
20 UI 400/800 UI
2 UI
51.84e
0.050
0.10
0.22
8 UI
3.8
0.030
0.06
155.52e
0.050
0.10
622.08
0.050
0.10
0.20
0.22
3.8
0.030
0.06
0.20
0.22
5.0
0.030
0.06
0.20
24
20 UI
Frequency error [R]
Frequency error
Frequency range
±10%
0.1 to 20 Hz
±7%
20 Hz to 300 kHz
±8%
300 kHz to 1 MHz
±10%
1 to 3 MHz
±15%
3 to 5 MHz
UIrms
2 UI range: ±R% ±Y UIrms, 20 UI range: ±R% ±Y UIrms
Fixed error [Y]
UIrms
Pseudo-random signal
Bit rate
(Mbit/s)
Clock signal
Bit length
Bit rate
(Mbit/s)
0.04
220 – 1
0.02
0.04
0.006
—
34.368
0.008
44.736
0.008
139.264
0.008
HP + LP
HP + LP
2 UI
8 UI
20 UI
1.544
0.004
0.02
0.03
215 – 1
2.048
0.004
0.02
0.03
0.04
215 – 1
8.448
0.004
—
0.03
0.02
0.05
223 – 1
34.368
0.006
0.02
0.04
0.02
0.05
215 – 1
44.736
0.006
0.02
0.04
0.02
0.05
223 – 1
139.264
0.006
0.02
0.04
Container
Bit rate
(Mbit/s)
2 UI
8 UI
20 UI
1.544
0.006
0.02
2.048
0.006
8.448
Jitter measurement
Clock signal
SONET/SDH signal
Bit rate
(Mbit/s)
HP + LP
2 UI
8 UI
20 UI
51.84e
0.010
0.02
0.06
VC3
51.84o
0.010
0.02
0.06
155.52e
0.010
0.02
155.52o
0.010
0.02
622.08
0.012
0.03
HP + LP
2 UI
8 UI
51.84e
0.008
0.02
20 UI
0.05
VC3
155.52e
0.008
0.02
0.05
0.06
VC4
622.08
0.010
0.02
0.06
0.06
VC4
0.08
VC4-4c
At PRBS 223 – 1
Frequency error [R]
Frequency error
Frequency range
±10%
0.1 to 20 Hz
±7%
20 Hz to 300 kHz
±8%
300 kHz to 1 MHz
±10%
1 to 3 MHz
±15%
3 to 5 MHz
Hit measurement
Count, Seconds, % free seconds
Frequency measurement
Resolution: 0.1 ppm, Display: Hz or ppm (After power-on, calibrates after 60 min warm-up, 23˚ ±5˚C)
Auxiliary interface
Demodulation output, Clock/Reference input
Jitter auto measurement
Jitter tolerance measurement: Evaluates jitter tolerance point automatically
Jitter sweep measurement: Conforms to high-speed jitter tolerance evaluation for mass production, etc.
Jitter transfer measurement: High dynamic range measurement by selective level method (variable)
Jitter frequency measurement: Measures the mapping jitter automatically
Frequency sweep measurement: Measures the jitter tolerance automatically while changing the offset
Modulation frequency: 10 µHz to 10 Hz (sine wave)
Amplitude: 0 to 400,000 UI (10 UIp-p steps)
[UIp-p]
A
B
A0
–20 dB/dec
Line wander generation
C
A1
f0
f1
f2
(Hz)
25
Bit rate
(Mbit/s)
f0
(µHz)
f1
(mHz)
f2
(Hz)
A0
A1
(UIp-p) (UIp-p)
1.544
10
20
10
400,000
2.048
10
20
10
400,000
800
8.448
10
200
10
400,000
8,000
34.368
10
400
10
400,000 16,000
44.736
10
400
10
400,000 16,000
139.264
10
2,000
10
400,000 80,000
51.84
10
400
10
400,000 16,000
155.52
10
2,000
10
400,000 80,000
622.08
10
400
10
400,000 16,000
800
Accuracy: ±Q% of setting ±100 UIp-p
Line wander generation
Error Q
Frequency range
±8%
10 µHz to 0.125 Hz
±12%
0.125 Hz to 1 Hz
±15%
1 to 10 Hz
Wander auto
measurement
Automatically evaluates the wander of the sine wave by the wander sweep measurement
Reference wander
generation (Option 03)
Off: Able to set non-modulated status
TDEV mask:
The 37 types of TDEV masks that are regulated by ITU-T, ETSI, ANSI, and Bellcore standards are available as default.
It is possible to add the wander modulation on the user specified TDEV mask.
Transient: It is possible to change the A (1 – e –63.7t) phase by the timing of the start.
Signal off: It is possible to disconnect the standard signal.
Wander measurement
(Option 02)
Conform to ITU-T O.172
Reference input: 2.048M (HDB3, Clock), 1.544M (AMI/B8ZS, Clock), 64k + 8 kHz, 5 MHz, 10 MHz
Sampling frequency: 40 Hz, 1 Hz, 0.1 Hz, 5 mHz (select by MX150001B)
Measurement range
P-P: 0.0 to 2E10 ns, +P/–P: 0.0 to 1E10 ns, TIE: 0.0 to ±1E10 ns
Accuracy: Conform to ITU-T O.172
Measurement time: 10 to 1 x 108 s (max. 120,000 s; MP1570A only)
Wander application (requires MX150001B Wander Application Software)
TIE: Max. 1 x 108 s, MTIE: Max. 1 x 108 s, TDEV: Max. 1 x 106 s
Frequency offset: Measurement conforms to ANSI TI.105.09
Frequency drift rate: Measurement conforms to ANSI TI.105.09
MRTIE: The evaluation separated from the wander by a frequency offset
Wander tolerance (TDEV) measurement: Evaluation by the various TDEV mask generations
Wander transfer (TDEV) measurement: Calibration method by simulation,outputting results by the one measurement
• MU150011A 2.5G Jitter Unit
Conforms to ITU-T O.172
Frequency: 2488.32 MHz
Modulation frequency: 0.1 Hz to 20 MHz
Amplitude: 0 to 808.0 UIp-p
Resolution: 0.001 UIp-p (2 UI range), 0.01 UIp-p (20 UI range), 0.4 UIp-p (800 UI range)
[UIp-p]
800 Ul range
–20 dB/dec
Jitter measurement
808
–20 dB/dec
20 Ul range
20.2
20 Ul range
2.02
–20 dB/dec
0.5
0.2
Jitter generation
F1 F1'
F2
F2'
F3
F4
F5
Bit rate
(Mbit/s)
F1
(Hz)
F1'
(Hz)
2488.32
0.1
60
Modulation frequency (Hz)
F2∗
F2'∗
F3∗
F4∗
F5∗
(kHz) (kHz) (MHz) (MHz) (MHz)
2.5
30
1.2
2
20
∗Typical value
Accuracy
2 UI range: (±Q% of setting) ±0.02 UIp-p, 20 UI range: (±Q% of setting) ±0.3 UIp-p, 800 UI range: (±Q% of setting) ±12.5 UIp-p
Bit rate
(Mbit/s)
2488.32
Error Q
Frequency range
±12%
0.1 Hz to 5 kHz
±8%
5 to 500 kHz
±12%
0.5 to 2 MHz
±15%
2 to 20 MHz
Frequency offset
Range: ±100 ppm/0.1 ppm steps (jitter on/off)
Accuracy: ±0.1 ppm (after power-on, calibrate after 60 min warm-up, 23˚±5 ˚C)
Auxiliary interface
External clock input, Jitter reference output
26
Conforms to ITU-T O.172
Frequency: 2488.32 MHz ±100 ppm
Modulation frequency: 10 Hz to 20 MHz
Amplitude: 0.0 to 32 UI
Resolution: 0.001 UIp-p/0.001 UIrms (2 UI range), 0.01 UIp-p/0.01 UIrms (32 UI range)
[UIp-p]
32 Ul range
–20 dB/dec
Jitter modulation
32
∗(11.31)
2 Ul range
2
∗(0.707)
Bit rate
(Mbit/s)
0.2
∗(0.071)
2488.32
F0
F0'
F2'
F2''
Modulation frequency
F3'
F4 (Hz)
F0
(Hz)
F0'
(Hz)
F2'
F2''
F3'
F4
(kHz) (kHz) (MHz) (MHz)
2 UI
–
100
–
100
1
20
32 UI
10
–
6.25
–
1
20
Conforms to ITU-T O.172
LP, HP0 + LP, HP1 + LP, HP2 + LP, HP + LP
Bit rate
(Mbit/s)
HP0
(Hz)
HP1
(Hz)
HP2
(Hz)
HP
(Hz)
LP
(Hz)
2488.32
10
5k
1M
12k
20M
Accuracy (UIp-p, UI+p, UI–p)
2 UI range: Measurement value ±R% ±W UIp-p, 32 UI range: Measurement value ±R% ±W UIp-p
[MU150008A/150009A/150010A are simultaneously installed, conform to ITU-T O.172]
Jitter measurement
Fixed error [W]
Input level: –12 to –10 dBm (adds to 0.01 UIp-p/dB at <–12 dBm)
Clock signal
SONET/SDH signal
Bit rate
(Mbit/s)
2488.32
HP1 + LP
Container
Bit rate
(Mbit/s)
VC4-16c
2488.32
HP2 + LP
2 UI
32 UI
2 UI
32 UI
0.100
2.2
0.050
1.40
HP1 + LP
HP2 + LP
2 UI
32 UI
2 UI
32 UI
0.050
0.60
0.030
0.50
At PRBS 223 – 1
Accuracy (UIrms)
2 UI range: ±R% ±Y UIrms, 32 UI range: ±R% ±Y UIrms
Fixed error [Y]
Input level: –12 to –10 dBm (adds to 0.002 UIrms/dB at <–12 dBm)
SONET/SDH signal
Bit rate
(Mbit/s)
2488.32
HP + LP
2 UI
32 UI
0.012
0.08
Container
VC4-16c
Clock signal
HP + LP
2 UI
32 UI
0.010
0.16
At PRBS 223 – 1
Frequency error [R]
Frequency error
Frequency range
±7%
5 to 300 kHz
±8%
300 kHz to 1 MHz
±10%
1 to 3 MHz
±15%
3 to 10 MHz
±20%
10 to 20 MHz
Hit measurement
Count, Seconds, % free seconds
Frequency measurement
Resolution: 0.1 ppm, Display: Hz or ppm (after power-on, calibrates after 60 min warm-up, 23˚ ±5˚C)
Auxiliary interface
Reference clock input
Auto jitter measurement
Jitter tolerance measurement: Evaluates jitter tolerance point automatically
Jitter sweep measurement: Conforms to high-speed jitter tolerance evaluation for mass production, etc.
Jitter transfer measurement: High dynamic range measurement by selective level method
Frequency sweep measurement: Measures the jitter tolerance automatically while changing the offset
27
Wander modulation
Modulation frequency: 10 µHz to 0.2 Hz (sine wave)
Amplitude: 0 to 57,600 UIp-p (30 UIp-p steps)
[UIp-p]
A0
A1
A2
F0
Line wander generation
Bit rate
(Mbit/s)
F1
F2
F3
Modulation frequency (Hz)
F4
Amplitude (UIp-p)
A0
A1
2488.32 57600 6480
F5
Frequency (Hz)
A2
f0
f1
f2
f3
f4
f5
810
10µ
180µ
1.6m
16m
0.13
0.2
Accuracy: ±Q% ±160 UIp-p
Frequency error
Frequency range
±8%
10 µHz to 0.1 Hz
±12%
0.1 to 0.2 Hz
Auto wander measurement
Wander sweep measurement
Reference wander
generation
Reference wander generation is valid when MU150005A/150006A/150007A Option 03 is mounted.
Off: Able to set non-modulated status
TDEV mask:
The 37 types of TDEV masks that are regulated by ITU-T, ETSI, ANSI, and Bellcore standards are available as default.
It is possible to add the wander modulation to the user specified TDEV mask.
Transient: It is possible to change the A (1 – e –63.7t) phase by the timing of the start.
Signal off: It is possible to disconnect the standard signal.
Wander measurement
Wander measurement is valid when MU150005A/150006A/150007A Option 02 is mounted. Conforms to ITU-T O.172
Reference input: 2.048M (HDB3, clock), 1.544M (AMI/B8ZS, clock), 64k + 8 kHz, 5 MHz, 10 MHz
Sampling frequency: 320 Hz, 40 Hz, 1 Hz, 0.1 Hz, 5 mHz (select from MX150001B)
Measurement range
P-P: 0.0 to 2E10 ns, +P/–P: 0.0 to 1E10 ns, TIE: 0.0 to ±1E10 ns
Accuracy: Conform to ITU-T O.172
Measurement time: 10 to 1 x 108 s (Max. 120,000 s: MP1570A only)
Wander application (requires MX150001B Wander Application Software)
TIE: Max. 1 x 108 s
MTIE: Max. 1 x 108 s
TDEV: Max. 1 x 106 s
Frequency offset: Measurement with conform to ANSI TI.105.09
Frequency drift rate: Measurement with conform to ANSI TI.105.09
MRTIE: Evaluation separated from the wander by the frequency variation
Wander tolerance (TDEV) measurement: Evaluation by the various TDEV mask generations
Wander transfer (TDEV) measurement: Calibration method by simulation, outputting results by the one measurement
28
• MP0123A ATM Unit
Bit rate
1.544, 2.048, 34.368, 44.736, 139.264, 51.84, 155.52, 622.08 Mbit/s
STM-4c (optical)
Mapping
SDH
ATM/AAL
AAL1
STM-1c (optical)
AAL2
STM-1c
AAL3/4
STM-0
AAL5
139M (G.832)
PDH
ATM
34M (G.832)
2M (G.704)
45M (G.704)
1.5M (G.704)
Traffic pattern
CBR, burst, sawtooth, CBR/PCR with CDV, Poisson
Test patterns
Cell: Single cell PRBS 9, cross cell PRBS 9/15/23, 16-bit word pattern, edit pattern, time stamp
O.191: Edit pattern
AAL1: Single cell PRBS 9, cross cell PRBS 9/15/23, 16-bit word pattern, edit pattern, time stamp
AAL2 (CPS-PDU): Time stamp
AAL2 (CPS-PACKET): Single cell PRBS 7, 8-bit word pattern, edit pattern
AAL3/4 (SAR-PDU): Time stamp
AAL3/4 (CPCS-PDU): Single cell PRBS 9, cross cell PRBS 9/15/23, 16-bit word pattern, edit pattern
AAL5: Single cell PRBS 9, cross cell PRBS 9/15/23, 16-bit word pattern, edit pattern
Error addition
Cell: HEC, programmable pattern
O.191: Lost cell, misinserted cell, errored cell, SECB
AAL1: Lost cell, SNP, PRBS, word
AAL2 (CPS-PDU): P, SN, OSF
AAL2 (CPS-PACKET): HEC, PRBS, word
AAL3/4 (SAR-PDU): SN, CRC10, segment type, LI, abort
AAL3/4 (CPCS-PDU): CPI, B/E tag mismatch, BA size, AL, length, PRBS, word
AAL5: Frame size, length, CRC32, abort, PRBS, word
Alarm addition
LCD, VP/VC AIS, VP/VC RDI, VP/VC CC, VP/VC loopback cell
PM cell
Error insertion: Lost cell, misinserted cell, BIPV, SECB
Cell editing
O.191, AAL1, AAL2, AAL3/4, AAL5, AIS, RDI, CC, loopback, FM, BR, background (10 ch)
Memorized cell
Possible to send after editing receiver's capture data
Measurement
Mode: Single, repeat, manual
Error
Cell: Cell count, correctable HEC, uncorrectable HEC, non-conforming cell
O.191: Errored cell, lost cell, misinserted cell, SECB
AAL1: SAR-PDU count, lost cell, SNP, uncorrectable SNP, PRBS, word
AAL2: CPS-PDU count, P, OSF, SN, CPS packet count, CID count (CPS packet with selected CID value), HEC, PRBS, word
AAL3/4*: SAR-PDU count, CRC10, MID count (SAR-PDU with selected MID value), SN, ST (segment type), LI, abort, discarded
PDU (one of SN error, Ll error, abort, COM with ST error, or EOM with ST error), CPCS-PDU count, CPI, B/E tag
mismatch, BA size, AL, length, undeliverded PDU (one of CPI error, B/E tag mismatch, BA size error, AL error, or
length error), PRBS, word
CRC10 is calculated for all SAR-PDU. The others are calculated for SAR-PDU with specified MID.
AAL5: CPCS-PDU count, frame size, length, CRC32, abort, discarded PDU (one of frame size error, length error, CRC32 error, or
abort), PRBS, word
FM: Lost cell, misinserted cell, BIPV, SECB
BR: Lost cell, misinserted cell, BIPV, SECB
Alarm: LCD, VP/VC segment AIS, VP/VC end-to-end AIS, VP/VC segment RDI, VP/VC end-to-end RDI, VP/VC segment LOC, VP/VC
end-to-end LOC
*
LED
LCD, VP-AIS, VP-RDI, VP-LOC, VC-AIS, VC-RDI, VC-LOC, errors
Monitor
Live monitor (1023 channel monitor), traffic monitor, cell monitor
Delay measurement
1-point CDV, 2-point CDV
Capture
1 to 2016 cells
29
• MP0131A Add/Drop Unit
Bit rate
1.544, 2.048, 34.368, 44.736, 139.264 Mbit/s
Level/waveform
1.544 Mbit/s: ANSI T1.102, 0/655 ft
44.736 Mbit/s: ANSI T1.102, 0/450/900 ft (0 ft: Drop only)
2.048/34.368/139 Mbit/s: ITU-T G.703
Connector
Bantam (100 Ω, balanced): 1.544 Mbit/s (AMI/B8ZS)
3-pin Siemens (120 Ω, balanced): 2.048 Mbit/s (HDB3)
BNC (75 Ω, unbalanced): 2.048 Mbit/s, 34.368 Mbit/s (HDB3), 139.264 Mbit/s (CMI)
Mapping
See Fig. 2
STM-64
STM-16
x 64
x 16
AUG
AU-4
STM-4
139M (Async.)
VC-4
x4
x3
TUG-3
x3
STM-1
STM-0
TU-3
VC-3
34M (Async.)
x7
AU-3
VC-3
45M (Async.)
x7
x3
TUG-2
TU-12
VC-12
2M (Async.)
VC-11
1.5M (Async.)
x4
Fig. 2 Add/Drop mapping structure
TU-11
• MP0111A Optical 156M/622M (1.31) Unit
Transmit
Bit rate: 155.52, 622.08 Mbit/s (NRZ)
Wavelength: 1310 nm
Output level: –11.5 dBm ±3.5 dB
Optical safety: IEC 825-1 Class 1, 21CFR1040.10 Class Ι
Connector: FC-PC (SM-F)
Receive
Bit rate: 155.52, 622.08 Mbit/s (NRZ)
Sensitivity
156M: –33 to –8 dBm (test pattern: PRBS 223 – 1, BER 10–10, +10˚ to +40˚C)
622M: –28 to –8 dBm (test pattern: PRBS 223 – 1, BER 10–10, +10˚ to +40˚C)
Connector: FC-PC (SM-F)
Power measurement
Measurement range: –30 to 0 dBm (peak power)
Accuracy: ≤±1 dB (–20 dBm)
Linearity: ≤±1 dB (–30 to 0 dBm)
• MP0112A Optical 156M/622M (1.55) Unit
Transmit
Bit rate: 155.52, 622.08 Mbit/s (NRZ)
Wavelength: 1550 nm
Output level: –5 dBm ±2 dB
Optical safety: IEC825-1 Class 1, 21CFR1040.10 Class Ι
Connector: FC-PC (SM-F)
Receive
Bit rate: 155.52, 622.08 Mbit/s (NRZ)
Sensitivity
156M: –33 to –8 dBm (test pattern: PRBS 223 – 1, BER 10–10, +10˚ to +40˚C)
622M: –28 to –8 dBm (test pattern: PRBS 223 – 1, BER 10–10, +10˚ to +40˚C)
Connector: FC-PC (SM-F)
Power measurement
Measurement range: –30 to 0 dBm (peak power)
Accuracy: ≤±1 dB (–20 dBm)
Linearity: ≤±1 dB (–30 to 0 dBm)
30
• MP0113A Optical 156M/622M (1.31/1.55) Unit
Transmit
Bit rate: 155.52, 622.08 Mbit/s (NRZ)
Wavelength: 1310/1550 nm
Output level
1.31 µm: –11.5 dBm ±3.5 dB, 1.55 µm: –5 dBm ±2 dB
Optical safety: IEC825-1 Class 1, 21CFR1040.10 Class Ι
Connector: FC-PC (SM-F)
Receive
Bit rate: 155.52, 622.08 Mbit/s (NRZ)
Sensitivity
156M: –33 to –8 dBm (test pattern: PRBS 223 – 1, BER 10–10, +10˚ to +40˚C)
622M: –28 to –8 dBm (test pattern: PRBS 223 – 1, BER 10–10, +10˚ to +40˚C)
Connector: FC-PC (SM-F)
Power measurement
Measurement range: –30 to 0 dBm (peak power)
Accuracy: ≤±1 dB (–20 dBm)
Linearity: ≤±1 dB (–30 to 0 dBm)
• MP0105A CMI Unit
Transmit
Bit rate: 155.52 Mbit/s, Level: 1 ±0.1 V, Connector: BNC (75 Ω)
Receive
Bit rate: 155.52 Mbit/s
Level: 1 ±0.1 V (0 to 12 dB, with √ f auto correction and monitor function)
Connector: BNC (75 Ω)
• MP0108A NRZ Unit
Transmit
Bit rate: 155.52, 622.08 Mbit/s
Level: ECL
Connector (Data, Clock): SMA (50 Ω)
Receive
Bit rate: 155.52, 622.08 Mbit/s
Level: ECL (–2 V)
Connector (Data, Clock): SMA (50 Ω)
• MP0122B 1.5/45/52/52 (1.31) Unit
Optical interface
Transmit
Receive
Bit rate: 51.84 Mbit/s (NRZ)
Wavelength: 1310 nm
Output level: –11.5 dBm ±3.5 dB
Optical safety: IEC 825-1 Class 1, 21CFR1040.10 Class Ι
Connector: FC-PC (SM-F)
Bit rate: 51.84 Mbit/s (NRZ)
Sensitivity
52M: –33 to –8 dBm (test pattern: PRBS 223 – 1, BER 10–10, +10˚ to +40˚C)
Connector: FC-PC (SM-F)
Power measurement
Measurement range: –30 to 0 dBm (peak power)
Accuracy: ≤±1 dB (–20 dBm)
Linearity: ≤±1 dB (–30 to 0 dBm)
Monitor input
Level: 0.1 to 1.0 Vp-p (AC), Connector: SMA (50 Ω)
31
• MU150008A/150009A/150010A 2.5G Unit
Bit rate
2488.32 Mbit/s (NRZ)
Optical
output
Wavelength: 1310 nm (MU150008A), 1550 nm (MU150009A), 1310/1550 nm (MU150010A)
Output level: –4 dBm ±3 dB
Optical safety: IEC825-1 Class 3A, 21CFR1040.10 Class ΙΙΙb
Connector: FC-PC (SM-F)
Optical
input
Sensitivity
Narrow: –28 to –9 dBm (BER 10 –10, +10˚ to +30˚C), –27 to –9 dBm (BER 10 –10, 0˚ to +30˚C)
Wide: –20 to –9 dBm (BER 10–10, +10˚ to +40˚C)
Connector: FC-PC (SM-F)
Power measurement
Range: –30 to –9 dBm (peak power)
Accuracy: ≤±2 dB (–20 dBm)
Linearity: ≤±2 dB (–30 to –9 dBm)
Electrical
I/O
Transmit (NRZ)
Level: ECL (–2 V), Connector (Data, Clock): SMA (50 Ω)
Receive (NRZ)
Level: ECL (–2 V), Connector (Data, Clock): SMA (50 Ω)
Monitor input
Level: 0.1 to 1.0 Vp-p (AC), Connector (Data): SMA (50 Ω)
Auxiliary
interface
External clock input, Receive clock output, Sync. output
* These units are not supported path penalty specification.
• MU150000A 2.5G/10G Unit
Bit rate
9953.28, 2488.32 Mbit/s (NRZ)
Electrical
I/O
Transmit (NRZ)
Level
Data H: 0 to –0.2 V, Data L: –0.85 to –1.4 V
Clock H: 0 to –0.2 V, Clock L: –0.85 to –1.3 V
Connector (Data, Clock): SMA (50 Ω)
Receive (NRZ)
Level
Data: 0.65 to 1.4 Vp-p, Clock: 0.65 to 1.3 Vp-p
Connector (Data, Clock): SMA (50 Ω)
Auxiliary
interface
External clock input, Internal clock output, Receive clock output,156M sync. output
• MU150001A/B Optical 10G Tx (1.55) Unit
Bit rate
9953.28, 2488.32 Mbit/s (Option)
Optical
output
Wavelength:
10G: 1550 nm band
2.5G: 1310 nm band (Option 01), 1550 nm band (Option 02),1310/1550 nm band (Option 03)
Output level: –4 dBm ±3 dB
Optical safety: IEC825-1 Class 3A, 21CFR1040.10 Class ΙΙΙb
Connector: FC-PC (SMF)
Electrical
Data input
H: 0 to –0.2 V, L: –0.85 to –1.4 V
Clock input
H: 0 to –0.2 V, L: –0.85 to –1.3 V
Connector: SMA 50 Ω
• MU150002A Optical 10G Rx (Narrow) Unit
Bit rate
Optical
input
Electrical
output
9953.28, 2488.32 Mbit/s (Option 01)
Sensitivity
10G: –13 to –3 dBm (BER 10 –12, NRZ, mark ratio: 1/2, PRBS: 231 –1)
2.5G: –29 to –10 dBm (BER 10 –11, NRZ, mark ratio: 1/2, PRBS: 223 –1) (Option 01)
Connector: FC-PC (SMF)
Power measurement
Range:–16 to 0 dBm (10G, average power), –30 to –10 dBm (2.5G, average power)
Accuracy: ≤±2 dB (10G, –10 dBm), ≤±2 dB (2.5G, –20 dBm)
Linearity: ≤±2 dB (10G, –16 to 0 dBm), ≤±2 dB (2.5G, –30 to –10 dBm)
Data output: 0.65 to 1.4 Vp-p
Clock output: 0.65 to 1.3 Vp-p
Connector: SMA 50 Ω
32
Typical Configuration
2.5G for Europe
1
1 MP1570A main frame
2 MP0113A Optical 156M/622M (1.31/1.55) Unit
3 MP0121A 2/8/34/139/156M Unit
3
4
5
4 MU150010A 2.5G (1.31/1.55) Unit
5 MU150011A 2.5G Jitter Unit
6 MU150007A 2/8/34/139M, 1.5/45/52M, 156/622M Jitter
Unit
6
2
2.5G for North America and Japan
7
7 MP1570A main frame (Japan: with Option 09)
8 MP0113A Optical 156M/622M (1.31/1.55) Unit
9 MP0122A 1.5/45/52M Unit
9
10
11
10 MU150010A 2.5G (1.31/1.55) Unit
11 MU150011A 2.5G Jitter Unit
12 MU150007A 2/8/34/139M, 1.5/45/52M, 156/622M Jitter
Unit
12
8
ATM
13
13 MP1570A main frame
14 MP0113A Optical 156M/622M (1.31/1.55) Unit
15 MP0121A 2/8/34/139/156M Unit
15
16
17
16 MP0122A 1.5/45/52M Unit
17 MP0123A ATM Unit
18 MU150007A 2/8/34/139M, 1.5/45/52M, 156/622M Jitter
Unit
18
14
33
10G for Europe
19 MP1570A main frame
19
20 MP0113A Optical 156M/622M (1.31/1.55) Unit
21 MP0121A 2/8/34/139/156M Unit
22 MU150002A Optical 10G Rx (Narrow) Unit
21
22
23
23 MU150001A Optical 10G Tx (1.55) Unit
24 MU150000A 2.5G/10G Unit
24
20
10 G for North America and Japan
25 MP1570A main frame (Japan: with Option 09)
25
26 MP0113A Optical 156M/622M (1.31/1.55) Unit
27 MP0122A 1.5/45/52M Unit
28 MU150002A Optical 10G Rx (Narrow) Unit
27
28
29
29 MU150001A Optical 10G Tx (1.55) Unit
30 MU150000A 2.5G/10G Unit
30
26
Unit
MP0121A 2/8/34/139/156M Unit
MP0122A 1.5/45/52M Unit
MP0122B 1.5/45/52/52M (1.31) Unit
MP0123A ATM Unit
MU150005A 2/8/34/139M,156/622M Jitter Unit
MU150006A 1.5/45/52M, 156/622M Jitter Unit
MU150007A 2/8/34/139M, 1.5/45/52M, 156M/622M
Jitter Unit
MP0111A Optical 156/622M (1.31) Unit
MP0112A Optical 156/622M (1.55) Unit
MP0113A Optical 156/622M (1.31/1.55) Unit
MU150008A 2.5G (1.31) Unit
MU150009A 2.5G (1.55) Unit
MU150010A 2.5G (1.31/1.55) Unit
MU150011A 2.5G Jitter Unit
MP0131A Add/Drop Unit
MU150000A 2.5G/10G Unit
MU150001A/B Optical 10G Tx (1.55) Unit
MU150002A Optical 10G Rx (Narrow) Unit
Slot 1
√
√*
√*
Slot 2
Slot 3
Slot 4/5
Front
Slot 1
Slot 2
√
√
√
√
√
√
√
√
√
Front
Slot 3
√
√
√
√
√
√
√
√
√
√
√
MP0105A CMI Unit
MP0108A NRZ Unit
Note: The same model name units can not be used simultaneously with inserted them in to the plural slots. Only one unit is usable at a time.
1: MP0122A/B can not insert in to Slot 1 when MP0123A is inserted in to Slot 3.
*
34
Slot 4/5
Ordering Information
Please specify the model/order number and quantity when ordering.
Model/Order No.
Name
MP1570A*1
Main frame
SONET/SDH/PDH/ATM Analyzer
Z0169
F0079
B0329G
Z0486
J0907Q
Standard accessories
AC power cord:
Printer paper (5 rolls/pack):
Fuse, 10 A:
Front cover:
Side cover:
Remote interlock cord:
Remarks
1
1
2
1
1
1
pc
pack
pcs
pc
pc
pc
J0908
Remote interlock terminator:
1 pc
E0008A
Optical output control key:
2 pc
J0747A
J0747B
J0747C
J0900A
J0635A
Fixed optical attenuator (5 dB):
Fixed optical attenuator (10 dB):
Fixed optical attenuator (15 dB):
Coaxial cable (AA-165-200), 20 cm:
Optical fiber cable (FC • PC-FC • PC), 1 m:
1
1
1
2
1
pc
pc
pc
pcs
pc
MX150001B
W1719AE
W1720AE
W1721AE
W1722AE
W1723AE
W1724AE
W1725AE
W1726AE
W1763AE
J1002A
J1002B
J1002C
Wander (MTIE, TDEV) Measurement Application Software:
MP1570A operation manual (Vol. 1 Basic operation for SDH):
MP1570A operation manual (Vol. 1 Basic operation for SONET):
MP1570A operation manual (Vol. 2 Remote control):
MP1570A operation manual (Vol. 3 ATM measurement):
MP1570A operation manual (Vol. 4 2.5G/10G measurement):
MP1570A operation manual (Vol. 5 Add/Drop function):
MP1570A operation manual (Vol. 6 Jitter/wander measurement):
MP1570A operation manual (Vol. 7 2.5G jitter/wander measurement):
Wander (MTIE, TDEV) Measurement Application Software Manual:
Semi-rigid cable:
Semi-rigid cable:
Semi-rigid cable:
1
1
1
1
1
1
1
1
1
1
2
2
3
pc
copy
copy
copy
copy
copy
copy
copy
copy
copy
pcs
pcs
pcs
MP0121A
MP0122A
MP0122B*2
MP0123A
MU150005A
MU150006A
MU150007A
Plug-in units
2/8/34/139/156M Unit
1.5/45/52M Unit
1.5/45/52/52M (1.31) Unit
ATM Unit
2/8/34/139M, 156/622M Jitter Unit
1.5/45/52M, 156/622M Jitter Unit
2/8/34/139M, 1.5/45/52M, 156/622M Jitter Unit
MU150008A*2
MU150009A*2
MU150010A*2
MU150011A
2.5G
2.5G
2.5G
2.5G
MP0131A
MU150000A
MU150001A*2
MU150001B*2
MU150002A*2
MP0111A*2
MP0112A*2
MP0113A*2
MU150017A
MU150017B
MU150031A
MU150031C
MU150061A
MU150061B
MP0105A
MP0108A
Add/Drop Unit
2.5G/10G Unit
Optical 10G Tx (1.55) Unit
Optical 10G Tx (1.55) Unit
Optical 10G Rx (Narrow) Unit
Optical 156M/622M (1.31) Unit
Optical 156M/622M (1.55) Unit
Optical 156M/622M (1.33/1.55) Unit
Optical 10G Rx (Wide) Unit
Optical 2.5G/10G Rx (Wide) Unit
Optical 10G Tx (1.55) High Power Unit
Optical 2.5G/10G Tx (1.55) High Power Unit
Optical 10G Tx (1.31) Unit
Optical 2.5G/10G Tx (1.31) Unit
CMI Unit
NRZ Unit
MP1570A-01*3
MP1570A-02*3
MP1570A-03*3
MP1570A-04*3
MP1570A-06
MP1570A-07
MP1570A-08
MP1570A-09
MP1570A-10*1
MP1570A-11*1
MP1570A-13
MP1570A-14
MP1570A-15
MP1570A-22
Options
RS-232C
GPIB
Ethernet
VGA output
MUX/DEMUX (2/8/34/139 Mbit/s)
MUX/DEMUX (1.5/45 Mbit/s)
45M-2M MUX/DEMUX
Japan mapping
SDH
SONET
Frame memory capture (156M/622M)
IP-over-SONET/SDH
IP-over-ATM
K1/K2 overwrite through
For MU150001A/B, MU150008A, MU150009A, MU150010A,
MU150031A/C, MU150061A/B
For MU150001A/B, MU150008A, MU150009A, MU150010A,
MU150031A/C, MU150061A/B
For MU150001A/B, MU150008A, MU150009A, MU150010A,
MU150031A/C, MU150061A/B
For MU150017A/B
For MU150002A
For MU150008A, MU150009A, MU150010A
For MU150011A
For MU150002A, MU150008A, MU150009A, MU150010A,
MU150017A/B, MP0111A, MP0112A, MP0113A
Supplied with MU150005A-02, MU150006A-02, MU150007A-02
For MU150005A, MU150006A, MU150007A
For MU150011A
Supplied with MX150001B
For MU150001A/B
For MU150002A
For MU150000A
Only jitter generation/measurement,
Only jitter generation/measurement,
Only jitter generation/measurement,
MP0122A/B
With optical power meter
With optical power meter
With optical power meter
Only jitter generation/measurement,
MU150009A, or MU150010A
(1.31) Unit
(1.55) Unit
(1.31/1.55) Unit
Jitter Unit
requires MP0121A
requires MP0122A/B
requires MP0121A or
requires MU150008A,
2 km transmission
40 km transmission
With optical power meter
With optical power meter
With optical power meter
With optical power meter, 1.31/1.55 switchable
For MP0121A
For MP0122A/B
Requires MP0121A and MP0122A/B
Requires MP0122A or MP0122B
64 frame
Requires option of frame memory/capture
Requires MP0123A
35
Model/Order No.
MU150005A-02
MU150006A-02
MU150007A-02
MU150005A-03
MU150006A-03
MU150007A-03
MU150008A-01
MU150009A-01
MU150010A-01
MU150000A-01
MU150001A/B-01
MU150001A/B-02
MU150001A/B-03
MU150002A-01
MU150002A-04
MP0111A/0112A-37
MP0111A/0112A-38
MP0111A/0112A-39
MP0111A/0112A-40
MP0111A/0112A-43
MP0113A-37
MP0113A-38
MP0113A-39
MP0113A-40
MP0113A-43
MP0122B-37
MP0122B-38
MP0122B-39
MP0122B-40
MP0122B-43
MU150008A-37
MU150008A-38
MU150008A-39
MU150008A-40
MU150008A-43
MU150009A-37
MU150009A-38
MU150009A-39
MU150009A-40
MU150009A-43
MU150010A-37
MU150010A-38
MU150010A-39
MU150010A-40
MU150010A-43
MU150001A/B-37
MU150001A/B-38
MU150001A/B-39
MU150001A/B-40
MU150001A/B-43
MU150002A-37
MU150002A-38
MU150002A-39
MU150002A-40
MU150002A-43
MU150017A/B-37
MU150017A/B-38
MU150017A/B-39
MU150017A/B-40
MU150017A/B-43
MU150031A/C-37
MU150031A/C-38
MU150031A/C-39
MU150031A/C-40
MU150031A/C-43
MU150061A/B-37
MU150061A/B-38
MU150061A/B-39
MU150061A/B-40
MU150061A/B-43
Name
Wander measurement
Wander measurement
Wander measurement
Wander reference output
Wander reference output
Wander reference output
Frame memory capture (2.5G)
Frame memory capture (2.5G)
Frame memory capture (2.5G)
Frame memory capture (2.5G/10G)
2.5G (1.31)
2.5G (1.55)
2.5G (1.31/1.55)
2.5G
Available for 10G (1.31)
FC connector
ST connector
DIN connector
SC connector
HMS-10/A connector
FC connector
ST connector
DIN connector
SC connector
HMS-10/A connector
FC connector
ST connector
DIN connector
SC connector
HMS-10/A connector
FC connector
ST connector
DIN connector
SC connector
HMS-10/A connector
FC connector
ST connector
DIN connector
SC connector
HMS-10/A connector
FC connector
ST connector
DIN connector
SC connector
HMS-10/A connector
FC connector
ST connector
DIN connector
SC connector
HMS-10/A connector
FC connector
ST connector
DIN connector
SC connector
HMS-10/A connector
FC connector
ST connector
DIN connector
SC connector
HMS-10/A connector
FC connector
ST connector
DIN connector
SC connector
HMS-10/A connector
FC connector
ST connector
DIN connector
SC connector
HMS-10/A connector
MP1570A-90
MP0121A-90
MP0122A-90
MP0122B-90
MP0123A-90
MU150005A-90
MU150006A-90
MU150007A-90
MU150008A-90
MU150009A-90
MU150010A-90
Maintenance service*5
Extended three year warranty
Extended three year warranty
Extended three year warranty
Extended three year warranty
Extended three year warranty
Extended three year warranty
Extended three year warranty
Extended three year warranty
Extended three year warranty
Extended three year warranty
Extended three year warranty
Remarks
64
64
64
26
frame
frame
frame
frame
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
Replaceable,
service
service
service
service
service
service
service
service
service
service
service
36
2
2
2
2
2
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
sets
set
set
set
set
set
set*4
set*4
set*4
set*4
set*4
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
Model/Order No.
MU150011A-90
MU150000A-90
MU150001A-90
MU150001B-90
MU150002A-90
MP0111A-90
MP0112A-90
MP0113A-90
MP0105A-90
MP0108A-90
MU150017A/B-90
MU150031A/C-90
MU150061A/B-90
Extended
Extended
Extended
Extended
Extended
Extended
Extended
Extended
Extended
Extended
Extended
Extended
Extended
MP1777A
MP9677B
MU967701A
MP1580A
MU150018A
Application equipment
10 GHz Jitter Analyzer
E/O, O/E Converter
Clock Recovery Unit
Portable 2.5G/10G Analyzer
2.5G/10G Jitter Unit
J0796A
J0796B
J0796C
J0796D
J0796E
J0162A
J0162B
J0845A
J0775D
J0776D
J0898A
J0898B
J0635A
J0635B
J0635C
J0660A
J0660B
J0660C
J0756A
J0756B
J0756C
J0747A
J0747B
J0747C
J0747D
J1049A
J1049B
J1049C
J1049D
J1050A
J1050B
J1050C
J1050D
J0322B
J0008
A0006
B0453B
B0454C
B0454D
B0448
B0336C
Optional accessories
ST connector
DIN connector
SC connector
HMS-10/A connector
FC connector
Balanced cable, 1 m
Balanced cable, 2 m
Balanced cable, 6 ft
Coaxial cable (BNC-P620 • 3C-2WS • BNC-P620, 75 Ω), 2 m
Coaxial cable (BNC-P-3W • 3D-2W • BNC-P-3W, 50 Ω), 2 m
Conversion cable (M-1PS • Bantam 3P), 1 m
Conversion cable (M-1PS • Bantam 3P), 2 m
Optical fiber cable, 1 m
Optical fiber cable, 2 m
Optical fiber cable, 3 m
Optical fiber cable, 1 m
Optical fiber cable, 2 m
Optical fiber cable, 3 m
Optical fiber cable, 1 m
Optical fiber cable, 2 m
Optical fiber cable, 3 m
Fixed optical attenuator (5 dB)
Fixed optical attenuator (10 dB)
Fixed optical attenuator (15 dB)
Fixed optical attenuator (20 dB)
Fixed optical attenuator (SC, 5 dB)
Fixed optical attenuator (SC, 10 dB)
Fixed optical attenuator (SC, 15 dB)
Fixed optical attenuator (SC, 20 dB)
Fixed optical attenuator (ST, 5 dB)
Fixed optical attenuator (ST, 10 dB)
Fixed optical attenuator (ST, 15 dB)
Fixed optical attenuator (ST, 20 dB)
Coaxial cable (11SMA • SUCOFLEX104 • 11SMA), 1 m
GPIB cable, 2 m
Head set
Blank panel (for front panel)
Blank panel (for Slot 1 to 3)
Blank panel (for Slot 4/5)
Soft case
Carrying case
three
three
three
three
three
three
three
three
three
three
three
three
three
year
year
year
year
year
year
year
year
year
year
year
year
year
warranty
warranty
warranty
warranty
warranty
warranty
warranty
warranty
warranty
warranty
warranty
warranty
warranty
Name
service
service
service
service
service
service
service
service
service
service
service
service
service
Remarks
9.95328 Gbit/s
For MP1580A
Replaceable, with protective
Replaceable, with protective
Replaceable, with protective
Replaceable, with protective
Replaceable, with protective
Siemens 3p-Siemens 3p
Siemens 3p-Siemens 3p
Bantam 3P/Bantam 3P
SM,
SM,
SM,
SM,
SM,
SM,
SM,
SM,
SM,
caps,
caps,
caps,
caps,
caps,
1
1
1
1
1
set
set
set
set
set
FC-SPC connector both ends
FC-SPC connector both ends
FC-SPC connector both ends
SC connector both-ends
SC connector both-ends
SC connector both-ends
ST connector both-ends
ST connector both-ends
ST connector both-ends
specify SDH (Option 10) or SONET (Option 11) when ordering depends on your system. The option price is included in the MP1570A. These two
*1: Must
options can be installed simultaneously. But in this case, one option price is charged.
the connector to be supplied as the standard connector when ordering the above options.
*2: Specify
If the connector is not specified the FC connector (MP0111A/0112A/0113A/0122B-37, MU150008A/150009A/150010A/150001A/150001B/150002A-37) is
supplied as standard.
video output, RS-232C, GPIB and Ethernet options cannot all be used simultaneously. Only the video output + RS-232C, or video output + GPIB,
*3: The
or RS-232C + GPIB board, or Ethernet board combinations support simultaneous use, so change the board combinations according to the purpose.
4: With Option 01, 2 sets
*5: Please ask your local Anritsu Field Office or Sales. Representative for price and availability.
*
The units for MP1552A/B and MP1555A/B can be used with MP1570A.
37
Soft case
Carrying case
Specifications are subject to change without notice.
ANRITSU CORPORATION
5-10-27, Minamiazabu, Minato-ku, Tokyo 106-8570, Japan
Phone: +81-3-3446-1111
Telex: J34372
Fax: +81-3-3442-0235
• U.S.A.
ANRITSU COMPANY
North American Region Headquarters
1155 East Collins Blvd., Richardson, TX 75081, U.S.A.
Toll Free: 1-800-ANRITSU (267-4878)
Phone: +1- 972-644-1777
Fax: +1-972-671-1877
• Canada
ANRITSU ELECTRONICS LTD.
700 Silver Seven Road, Suite 120, Kanata,
ON K2V 1C3, Canada
Phone: +1-613-591-2003
Fax: +1-613-591-1006
• Brasil
ANRITSU ELETRÔNICA LTDA.
Praia de Botafogo 440, Sala 2401 CEP 22250-040,
Rio de Janeiro, RJ, Brasil
Phone: +55-21-5276922
Fax: +55-21-537-1456
• U.K.
ANRITSU LTD.
200 Capability Green, Luton, Bedfordshire LU1 3LU, U.K.
Phone: +44-1582-433200
Fax: +44-1582-731303
• Germany
• Singapore
Grafenberger Allee 54-56, 40237 Düsseldorf, Germany
Phone: +49-211-96855-0
Fax: +49-211-96855-55
10, Hoe Chiang Road #07-01/02, Keppel Towers,
Singapore 089315
Phone: +65-6282-2400
Fax: +65-6282-2533
ANRITSU GmbH
ANRITSU PTE LTD.
• France
• Hong Kong
ANRITSU S.A.
9, Avenue du Québec Z.A. de Courtabœuf 91951 Les
Ulis Cedex, France
Phone: +33-1-60-92-15-50
Fax: +33-1-64-46-10-65
• Italy
ANRITSU COMPANY LTD.
Suite 719, 7/F., Chinachem Golden Plaza, 77 Mody
Road, Tsimshatsui East, Kowloon, Hong Kong, China
Phone: +852-2301-4980
Fax: +852-2301-3545
• Korea
ANRITSU S.p.A.
Via Elio Vittorini, 129, 00144 Roma EUR, Italy
Phone: +39-06-509-9711
Fax: +39-06-502-24-25
• Sweden
ANRITSU AB
Botvid Center, Fittja Backe 1-3 145 84 Stockholm,
Sweden
Phone: +46-853470700
Fax: +46-853470730
ANRITSU CORPORATION
8F Hyun Juk Bldg. 832-41, Yeoksam-dong,
Kangnam-ku, Seoul, 135-080, Korea
Phone: +82-2-553-6603
Fax: +82-2-553-6604 ˜ 5
• Australia
ANRITSU PTY LTD.
• Spain
Unit 3/170 Forster Road Mt. Waverley, Victoria, 3149,
Australia
Phone: +61-3-9558-8177
Fax: +61-3-9558-8255
Europa Empresarial Edificio Londres, Planta 1, Oficina
6 C/ Playa de Liencres, 2 28230 Las Rozas. Madrid,
Spain
Phone: +34-91-6404460
Fax: +34-91-6404461
7F, No. 316, Sec. 1, NeiHu Rd., Taipei, Taiwan
Phone: +886-2-8751-1816
Fax: +886-2-8751-1817
ANRITSU ELECTRÓNICA, S.A.
• Taiwan
ANRITSU COMPANY INC.
030220
Catalog No. MP1570A(SDH)-E-A-1-(7.00)
Printed in Japan 2003-2 W/M
Download PDF

advertising