Teccor brand Thyristors Qxx25xx & Qxx25xHx Series

Teccor brand Thyristors Qxx25xx & Qxx25xHx Series
Teccor® brand Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Qxx25xx & Qxx25xHx Series
RoHS
Description
25 Amp bi-directional solid state switch series is designed
for AC switching and phase control applications such as
motor speed and temperature modulation controls, lighting
controls, and static switching relays.
Standard type devices normally operate in Quadrants I & III
triggered from AC line.
Alternistor type devices only operate in quadrants I, II, & III
and are used in circuits requiring high dv/dt capability.
Features & Benefits
• RoHS compliant
Agency Approval
Agency
• Voltage capability up
to 1000 V
Agency File Number
TO-220L, TO-218K, TO-218J &
Fastpak Packages: E71639
IT(RMS)
VDRM /VRRM
IGT
Applications
Excellent for AC switching and phase control applications
such as heating, lighting, and motor speed controls.
Main Features
Symbol
•S
urge capability up
to 250 A
• Glass – passivated
junctions
Value
Unit
25
A
1000
V
50 to 80
mA
Typical applications are AC solid-state switches, industrial
power tools, exercise equipment, white goods and
commercial appliances.
Alternistor Triacs (no snubber required) are used in
applications with extremely inductive loads requiring
highest commutation performance.
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Schematic Symbol
Additional Information
MT2
MT1
G
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/30/16
Datasheet
Resources
Samples
Teccor® brand Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Absolute Maximum Ratings – Standard Triac
Symbol
IT(RMS)
Parameter
RMS on-state current
Test Conditions
Qxx25R5
Qxx25N5
TC = 85°C
Qxx25P5
TC = 57°C
Qxx25R5
Qxx25N5
ITSM
Peak non-repetitive surge current
Qxx25P5
I 2t
I2t Value for fusing
Qxx25R5
Qxx25N5
Critical rate-of-rise of on-state current
Unit
25
A
full cycle; f = 50Hz;
TJ (initial) = 25°C
167
full cycle; f = 60Hz;
TJ (initial) = 25°C
200
full cycle; f = 50Hz;
TJ (initial) = 25°C
220
full cycle; f = 60Hz;
TJ (initial) = 25°C
250
tp = 8.3ms
Qxx25P5
di/dt
Value
A
166
A2s
260
f = 60Hz; TJ =125°C
100
A/μs
IGTM
Peak gate current
TJ = 125°C
2
A
PG(AV)
Average gate power dissipation
TJ = 125°C
0.5
W
-40 to 125
°C
Tstg
Storage temperature range
Operating junction temperature range
TJ
Qxx25R5
Qxx25N5
-40 to 125
Qxx25P5
-25 to 125
Test Conditions
Value
Unit
25
A
°C
Absolute Maximum Ratings – Alternistor Triac
Symbol
IT(RMS)
Parameter
RMS on-state current
Qxx25LH5
Qxx25L6
TC = 65°C
Qxx25K6
Qxx25J6
TC = 85°C
Qxx25RH5
Qxx25NH5
Qxx25R6
Qxx25NH6
TC = 95°C
full cycle; f = 50Hz;
TJ (initial) = 25°C
208
full cycle; f = 60Hz;
TJ (initial) = 25°C
250
I2t Value for fusing
tp = 8.3ms
260
A2s
di/dt
Critical rate-of-rise of on-state current
f = 60Hz; TJ =125°C
100
A/μs
IGTM
Peak gate current
TJ = 125°C
2
A
PG(AV)
Average gate power dissipation
TJ = 125°C
ITSM
I2t
Tstg
TJ
Peak non-repetitive surge current
A
0.5
W
Storage temperature range
-40 to 125
°C
Operating junction temperature range
-40 to 125
°C
Note: xx = voltage
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/30/16
Teccor® brand Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Standard Triac
Value
Symbol
Test Conditions
IGT
VD = 12V; RL = 60 Ω
VGT
VD = 12V; RL = 60 Ω
VGD
VD = VDRM; RL = 3.3 kΩ ; TJ = 125°C
IH
IT = 400mA (initial)
dv/dt
Quadrant
Qxx25R5
Qxx25N5
Qxx25P5
I – II – III
MAX.
50
IV
TYP.
120
I – II – III
MAX.
1.3
IV
TYP.
2.5
ALL
MIN.
MAX.
VD = VDRM; Gate Open; TJ = 125°C
400V
600V
800V
VD = VDRM; Gate Open; TJ = 100°C
1000V
MIN.
(dv/dt)c
(di/dt)c = 13.3 A/ms; TJ = 125°C
MIN.
tgt
IG = 2 x IGT; PW = 15µs; IT = 35.4 A
TYP.
Unit
mA
V
0.2
V
100
50
mA
275
225
200
—
475
400
200
—
V/μs
5
V/μs
4
3
μs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Alternistor Triac
Value
Symbol
Test Conditions
Quadrant
IGT
VD = 12V; RL = 60 Ω
I – II – III
MAX.
VGT
VD = 12V; RL = 60 Ω
I – II – III
MAX.
VGD
VD = VDRM; RL = 3.3 kΩ ; TJ = 125°C
I – II – III
IH
IT = 400mA (initial)
dv/dt
400V
600V
800V
VD = VDRM; Gate Open; TJ = 100°C
1000V
Qxx25R6
Qxx25L6
Qxx25NH6
Qxx25K6
Qxx25J6
50
80
MIN.
Unit
mA
1.3
MIN.
MAX.
VD = VDRM; Gate Open; TJ = 125°C
Qxx25RH5
Qxx25LH5
Qxx25NH5
V
0.2
V
50
100
575
500
400
600
600
475
—
400
mA
V/μs
(dv/dt)c
(di/dt)c = 13.3 A/ms; TJ = 125°C
MIN.
20
30
V/μs
tgt
IG = 2 x IGT; PW = 15µs; IT = 35.4 A
TYP.
3
5
μs
Static Characteristics
Symbol
VTM
Value
Qxx25R5
Qxx25N5
Qxx25xH5
Qxx25P5
Qxx25x6
Qxx25NH6
Test Conditions
IT = 35.4A; tp = 380 μs
MAX.
TJ = 25°C
IDRM / IRRM
VDRM / VRRM
TJ = 100°C
TJ = 125°C
Note: xx = voltage, x = package
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/30/16
1.8
1.4
10
100
20
—
500
—
1000V
1000
—
600 – 800V
2000
5000
600 – 800V
1000V
600 – 800V
MAX.
Unit
V
μA
Teccor® brand Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Thermal Resistances
Symbol
Parameter
Value
Junction to case (AC)
Rθ(J-C)
Junction to ambient
Rθ(J-A)
Qxx25R5 / Qxx25N5
Qxx25R6 / Qxx25NH6
Qxx25RH5 / Qxx25NH5
0.89
Qxx25P5
1.6
Qxx25L6 / Qxx25LH5
2.0
Qxx25K6 / Qxx25J6
1.32
Qxx25Ry
45
Qxx25L6 / Qxx25LH5
50
Unit
°C/W
°C/W
Note: xx = voltage, y = sensitivity
Figure 2: N
ormalized DC Gate Trigger Voltage
vs. Junction Temperature
Figure 1: Normalized DC Gate Trigger Current
vs. Junction Temperature
2.5
Ratio of VGT / VGT(TJ = 25ºC)
2.0
Ratio of IGT/IGT(TJ = 25°C)
2.0
1.5
1.0
1.5
1.0
0.5
0.5
0.0
0.0
-40
-15
10
35
60
85
110
-40
125
-15
Junction Temperature (TJ) -- (°C)
Figure 3: Normalized DC Holding Current
vs. Junction Temperature
35
60
85
110
125
1.6
1.7
Figure 4: O
n-State Current vs. On-State
Voltage (Typical)
2.0
90
Instantaneous On-state Current (iT) – Amps
Ratio of IH / IH(TJ = 25ºC)
10
Junction Temperature (TJ) -- (ºC)
1.5
1.0
0.5
TJ = 25°C
80
70
Qxx25P5/Qxx25R6
Qxx25L6/Qxx25NH6
Qxx25K6/Qxx25J6
Qxx25RH5/Qxx25LH5
Qxx25NH5
60
50
40
30
20
Qxx25R5
Qxx25N5
10
0
0.0
-40
-15
10
35
60
85
Junction Temperature (TJ) -- (ºC)
110
125
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
Instantaneous On-state Voltage (vT) – Volts
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/30/16
Teccor® brand Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Figure 5: Power Dissipation (Typical) vs. RMS
On-State Current
Figure 6: M
aximum Allowable Case Temperature
vs. RMS On-State Current
130
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
30
Maximum Allowable Case Temperature
(TC) - °C
Average On-State Power Dissipation
[PD(AV)] -- Watts
35
Qxx25R6
Qxx25NH6
Qxx25RH5
Qxx25NH5
120
25
Qxx25R5
Qxx25N5
Qxx25K6
Qxx25J6
110
Qxx25R5
Qxx25N5
100
20
15
Qxx25P5/Qxx25R6
Qxx25L6/Qxx25NH6
Qxx25K6/Qxx25J6
Qxx25RH5/Qxx25LH5
Qxx25NH5
10
5
0
90
Qxx25L6
Qxx25LH5
80
Qxx25P5
70
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
60
50
0
5
10
15
20
25
0
RMS On-State Current [IT(RMS)] -- Amps
5
10
15
20
25
RMS On-State Current [IT(RMS)] - Amps
Figure 7: Maximum Allowable Ambient Temperature vs. RMS On-State Current (TO-220 packages only)
Maximum Allowable Ambient Temperature
(TA) --°C
120
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
FREE AIR RATING
100
80
60
40
20
0
0.0
0.5
1.0
1.5
2.0
2.5
RMS On-State Current [IT(RMS)] -- Amps
Figure 8: Surge Peak On-State Current vs. Number of Cycles
Peak Surge (Non-repetitive)
On-state Current (ITSM) – Amps
1000
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated Value at
Specified Case Temperature
Qxx25P5/Qxx25R6
Qxx25L6/Qxx25NH6
Qxx25K6/Qxx25J6
Qxx25RH5/Qxx25LH5
Qxx25NH5
Notes:
1. G
ate control may be lost during and immediately
following surge current interval.
2. O
verload may not be repeated until junction
temperature has returned to steady-state
rated value.
100
Qxx25R5
Qxx25N5
10
1
10
100
Surge Current Duration -- Full Cycles
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/30/16
1000
30
Teccor® brand Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Soldering Parameters
Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp)
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
Physical Specifications
Terminal Finish
100% Matte Tin-plated
Body Material
UL recognized epoxy meeting flammability
classification 94V-0
Lead Material
Copper Alloy
tP
TP
Temperature
Reflow Condition
Ramp-up
TL
tL
TS(max)
Preheat
TS(min)
25
tS
time to peak temperature
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of the Thyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
Time
Environmental Specifications
Test
High Temperature
Voltage Blocking
Temperature Cycling
Biased Temp &
Humidity
High Temp. Storage
Design Considerations
Ramp-do
Ramp-down
Specifications and Conditions
MIL-STD-750: Method 1040, Condition A
Rated VRRM, 125°C, 1008 hours
MIL-STD-750: Method 1051
-40°C to 125°C, 15-minute dwell,
100 cycles
EIA/JEDEC: JESD22-A101
320VDC, 85°C, 85%RH, 1008 hours
MIL-STD-750: Method 1031
150°C, 1008 hours
Low-Temp Storage
-40°C, 1008 hours
Resistance to
Solder Heat
MIL-STD-750: Method 2031
260°C, 10 seconds
Solderability
ANSI/J-STD-002, Category 3, Test A
Lead Bend
MIL-STD-750: Method 2036, Condition E
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/30/16
Teccor® brand Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Dimensions — TO-220AB (R Package) — Non-isolated Mounting Tab
TC MEASURING POINT
AREA (REF.) 0.17 IN2
O
A
Ø E
Dimension
8.13
.320
P
MT2
B
C
13.36
.526
D
7.01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
R
G
L
H
N
K
J
M
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
MT1 MT2 GATE
Inches
Millimeters
Min
Max
Min
Max
A
0.380
0.420
9.65
10.67
B
0.105
0.115
2.67
2.92
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
G
0.540
0.575
13.72
14.61
H
0.025
0.035
0.64
0.89
J
0.195
0.205
4.95
5.21
K
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
Dimensions — TO-220AB (L Package) — Isolated Mounting Tab
TC MEASURING POINT
O
A
Ø E
P
Dimension
8.13
.320
A
B
C
13.36
.526
D
7.01
.276
F
R
G
L
H
K
N
J
M
MT1 MT2 GATE
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/30/16
Inches
AREA (REF.) 0.17 IN2
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
Millimeters
Min
Max
Min
Max
0.380
0.420
9.65
10.67
B
0.105
0.115
2.66
2.92
C
0.230
0.250
5.85
6.35
D
0.590
0.620
14.98
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.80
3.30
G
0.540
0.575
13.71
14.60
H
0.025
0.035
0.63
0.89
J
0.195
0.205
4.95
5.21
K
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
1.78
2.16
N
0.018
0.024
0.45
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.53
R
0.038
0.048
0.97
1.22
Teccor® brand Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Dimensions — TO-263 (N Package) — D2Pak Surface Mount
TC MEASURING POINT
B
Dimension
E
MT2
7.01
.276
A
8.41
.331
S
W
U
J
K
GATE
MT1
G
8.13
.320
H
D
F
2.16
.085
11.68
.460
7.01
.276
7.01
.276
16.89
.665
8.89
.350
Inches
AREA: 0.11 IN2
C
V
1.40
.055
3.81
.150
Min
Millimeters
Max
Min
Max
A
0.360
0.370
9.14
9.40
B
0.380
0.420
9.65
10.67
C
0.178
0.188
4.52
4.78
D
0.025
0.035
0.64
0.89
E
0.045
0.060
1.14
1.52
F
0.060
0.075
1.52
1.91
G
0.095
0.105
2.41
2.67
H
0.092
0.102
2.34
2.59
J
0.018
0.024
0.46
0.61
K
0.090
0.110
2.29
2.79
S
0.590
0.625
14.99
15.88
V
0.035
0.045
0.89
1.14
U
0.002
0.010
0.05
0.25
W
0.040
0.070
1.02
1.78
Min
Max
Min
A
0.810
0.835
20.57
21.21
B
0.610
0.630
15.49
16.00
2.03
.080
6.60
.260
Dimensions — TO-218AC (K Package) — Isolated Mounting Tab
TC Measurement Point
U (diameter)
B
Dimension
C
D
A
F
E
W
Gate
J
P
MT1
MT2
M
Q
R
H
G
N
K
L
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
Inches
Millimeters
Max
C
0.178
0.188
4.52
4.78
D
0.055
0.070
1.40
1.78
E
0.487
0.497
12.37
12.62
F
0.635
0.655
16.13
16.64
G
0.022
0.029
0.56
0.74
H
0.075
0.095
1.91
2.41
J
0.575
0.625
14.61
15.88
K
0.211
0.219
5.36
5.56
L
0.422
0.437
10.72
11.10
M
0.058
0.068
1.47
1.73
N
0.045
0.055
1.14
1.40
P
0.095
0.115
2.41
2.92
Q
0.008
0.016
0.20
0.41
R
0.008
0.016
0.20
0.41
U
0.164
0.165
4.10
4.20
W
0.085
0.095
2.17
2.42
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/30/16
Teccor® brand Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Dimensions — TO-218X (J Package) — Isolated Mounting Tab
C
B
Tc
Measurement
Point
U (diameter)
A
D
Dimension
G
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
F
E Z
MT1
X
W
J
Gate
N
R
S
P
T
M
Y
K
MT2
H
L
V
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
Inches
Millimeters
Min
Max
Min
Max
0.810
0.610
0.178
0.055
0.487
0.635
0.022
0.075
0.575
0.256
0.220
0.080
0.169
0.034
0.113
0.086
0.156
0.164
0.603
0.000
0.003
0.028
0.085
0.835
0.630
0.188
0.070
0.497
0.655
0.029
0.095
0.625
0.264
0.228
0.088
0.177
0.042
0.121
0.096
0.166
0.165
0.618
0.005
0.012
0.032
0.095
20.57
15.49
4.52
1.40
12.37
16.13
0.56
1.91
14.61
6.50
5.58
2.03
4.29
0.86
2.87
2.18
3.96
0.410
15.31
0.00
0.07
0.71
2.17
21.21
16.00
4.78
1.78
12.62
16.64
0.74
2.41
15.88
6.71
5.79
2.24
4.49
1.07
3.07
2.44
4.22
0.420
15.70
0.13
0.30
0.81
2.42
Min
Max
Min
Max
1.531
1.177
0.843
0.780
0.783
0.874
0.161
0.386
0.508
0.079
0.047
0.307
0.372
0.043
0.315
0.098
0.846
0.244
0.106
0.321
0.321
0.220
0.246
0.246
0.183
0.120
0.175
1.543
1.185
0.850
0.795
0.791
0.906
0.169
0.465
0.587
0.087
0.055
0.319
0.396
0.059
0.331
0.106
0.886
0.256
0.130
0.329
0.329
0.228
0.254
0.254
0.191
0.130
0.185
38.90
29.90
21.40
19.80
19.90
22.20
4.10
9.80
12.90
2.00
1.20
7.80
9.45
1.10
8.00
2.50
21.50
6.20
2.70
8.15
8.15
5.60
6.25
6.25
4.65
3.05
4.45
39.20
30.10
21.60
20.20
20.10
23.00
4.30
11.80
14.90
2.20
1.40
8.10
10.05
1.50
8.40
2.70
22.50
6.50
3.30
8.35
8.35
5.80
6.45
6.45
4.85
3.30
4.70
Dimensions — TO-3 (P Package) Fastpak* — Isolated Mounting Tab
A
Dimension
B
D
MT2
H
F
MT1
Gate
ΦG
E
TC Measuring Point
C
I
Φ J (MT1, MT2)
T
U
M L
V
W
R
Φ K (Gate)
5-ΦN
S
Q
O
P
Thickness of all three copper-alloy terminals is .032" (0.81 mm).
Note: Not recommended for new designs.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T (MT1)
T (MT2)
T (Gate)
U (MT1)
U (MT2)
U (Gate)
V
W
Inches
Millimeters
Maximum torque to be applied to mounting tab is 8 in-lbs (0.904Nm).
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/30/16
Teccor® brand Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Product Selector
Part Number
Voltage
400V
600V
Gate Sensitivity Quadrants
800V
1000V
I - II - III
Package
IV
Qxx25R5
X
X
X
X
50 mA
120 mA (TYP)
TO-220R
Qxx25N5
X
X
X
X
50 mA
120 mA (TYP)
TO-263 D2-Pak
X
X
50 mA
120 mA (TYP)
X
X
X
50 mA
Qxx25P5
Qxx25RH51
Fastpak
TO-220R
Qxx25LH5
X
X
X
50 mA
TO-220L
Qxx25NH5
X
X
X
50 mA
TO-263 D2-Pak
Qxx25R6
X
X
X
X
80 mA
TO-220R
Qxx25L6
X
X
X
X
80 mA
TO-220L
Qxx25NH6
X
X
X
X
80 mA
TO-263 D2-Pak
Qxx25J6
X
X
X
80 mA
TO-218X
Qxx25K6
X
X
X
80 mA
TO-218AC
X
Note: (1) Not recommend for new design
Packing Options
Part Number
Marking
Weight
Packing Mode
Base Quantity
Qxx25R5TP
Qxx25R5
2.20g
Tube
500 (50 per tube)
Qxx25N5TP
Qxx25N5
1.60g
Tube
500 (50 per tube)
Qxx25N5RP
Qxx25N5
1.60g
Embossed Carrier
500
Qxx25RH5TP
Qxx25RH5
2.20g
Tube
500 (50 per tube)
Qxx25LH5TP
Qxx25LH5
2.20g
Tube
500 (50 per tube)
Qxx25NH5TP
Qxx25NH5
1.60g
Tube
500 (50 per tube)
Qxx25NH5RP
Qxx25NH5
1.60g
Embossed Carrier
500
Qxx25R6TP
Qxx25R6
2.20g
Tube
500 (50 per tube)
Qxx25L6TP
Qxx25L6
2.20g
Tube
500 (50 per tube)
Qxx25NH6TP
Qxx25NH6
1.60g
Tube
500 (50 per tube)
Qxx25NH6RP
Qxx25NH6
1.60g
Embossed Carrier
500
Qxx25J6TP
Qxx25J6
5.23g
Tube
250 (25 per tube)
Qxx25K6TP
Qxx25K6
4.40g
Tube
250 (25 per tube)
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/30/16
Teccor® brand Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
TO-263 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
0.63
(16.0)
0.157
(4.0)
0.059
DIA
(1.5)
0.945
(24.0)
0.827
(21.0)
Gate
MT1 / Cathode
*
* Cover tape
MT2 / Anode
0.512 (13.0) Arbor
Hole Dia.
12.99
(330.0)
Dimensions
are in inches
(and millimeters).
1.01
(25.7)
Direction of Feed
Part Numbering System
Part Marking System
TO-220 AB - (L and R Package)
TO-263 AB - (N Package)
Q 60 25 N H6
DEVICE TYPE
Q: Triac or Alternistor
VOLTAGE RATING
40: 400V
60: 600V
80: 800V
K0: 1000V
CURRENT RATING
25: 25A
SENSITIVITY
Standard Triac
5: 50mA
Alternistor
H5: 50mA
6: 80mA
H6: 80mA
PACKAGE TYPE
L : TO-220AB Isolated
R : TO-220AB Non-Isolated
N : TO-263 (D2 -Pak)
K : TO-218AC Isolated
J : TO-218X Isolated
P : Fastpak
Q6025R5
Q6025K6
YM
®
®
YMLXX
Date Code Marking
Y:Year Code
M: Month Code
XXX: Lot Trace Code
Fastpak - (P Package)
Q6025P5
®
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/30/16
TO-218AC - (K Package)
TO-218X - (J Package)
YMXXX
Date Code Marking
Y:Year Code
M: Month Code
L: Location Code
XX: Lot Serial Code
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement