Teccor brand Thyristors Dxx15L & Dxx20L & Dxx25L Series

Teccor brand Thyristors Dxx15L & Dxx20L & Dxx25L Series
Teccor® brand Thyristors
15 / 20 / 25 Amp Rectifiers
Dxx15L & Dxx20L & Dxx25L Series
RoHS
Description
Silicon rectifiers that are excellent for DC phase control
applications with motor loads.
Isolated mounting tab allows for use in circuits with
common anode or common cathode connections.
Features & Benefits
• RoHS Compliant
• Surge capability up to
350 A
• Glass – passivated
junctions
• Voltage capability up to
1000 V
Agency Approval
Agency
Agency File Number
L Package : E71639
Applications
Typical applications are AC to DC solid-state switches for
industrial power tools, exercise equipment, white goods,
and commercial appliances.
Internally constructed isolated package is offered for ease
of heat sinking with highest isolation voltage.
Schematic Symbol
A
K
Main Features
Symbol
Additional Information
Datasheet
Resources
Value
Unit
IT(RMS)
15 / 20 / 25
A
VRRM
400 to 1000
V
Samples
Absolute Maximum Ratings
Symbol
Parameter
Test Conditions
IF(RMS)
RMS forward current
IF(AV)
Average forward current
Dxx15L: TC = 90°C
Dxx20L/Dxx25L: TC = 80°C
Value
Unit
Dxx15L
Dxx20L
Dxx25L
15
20
25
A
9.5
12.7
15.9
A
single half cycle; f = 50Hz;
TJ (initial) = 25°C
188
255
300
single half cycle; f = 60Hz;
TJ (initial) = 25°C
225
300
350
tp = 8.3 ms
210
374
508
IFSM
Peak non-repetitive surge current
I2t
I2t Value for fusing
Tstg
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 125
°C
TJ
Note: xx = voltage
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/02/16
A
A2s
Teccor® brand Thyristors
15 / 20 / 25 Amp Rectifiers
Electrical Characteristics (TJ = 25°C, unless otherwise specified)
Symbol
trr
Parameter
Test Conditions
Reverse-recovery Time
IF=0.9A, IR=1.5A
Value
Unit
4
μs
TYP.
Static Characteristics
Symbol
Test Conditions
Value
Unit
1.6
V
15A Device IT = 30A; tp = 380μs
20A Device IT = 40A; tp = 380μs
VFM
MAX.
25A Device IT = 50A; tp = 380μs
TJ = 25°C
IRM
VRRM
400-600V
10
800-1000V
20
400-800V
TJ = 100°C
TJ = 125°C
500
MAX.
1000V
3000
400-800V
1000
μA
Thermal Resistances
Symbol
Parameter
Junction to case (AC)
Rθ(J-C)
Value
Dxx15L
2.60
Dxx20L
2.55
Dxx25L
2.50
Unit
°C/W
Note: xx = voltage
Figure 1: On-State Current vs. On-State
Voltage (Typical)
Figure 2: P
ower Dissipation vs. Average Forward OnState Current (Typical)
20
TJ = 25°C
140
Average Forward Power Dissipation
[PF(AV)] - (Watts)
Instantaneous Forward Current (iF) – Amps
160
Dxx20L
Dxx25L
120
100
80
Dxx15L
60
40
20
Dxx25L
Dxx20L
16
Dxx15L
12
8
4
Single pulse rectification
60Hz sine wave
0
0
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
Instantaneous Forward Voltage (vF) – Volts
1.7
1.8
0
2
4
6
8
10
12
14
16
Average Forward Current [IF(AV)] - Amps
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/02/16
Teccor® brand Thyristors
15 / 20 / 25 Amp Rectifiers
Figure 3: Maximum Allowable Case Temperature vs.
Average On-State Current
Figure 4: S
urge Peak On-State Current vs.
Number of Cycles
1000
130
125
Peak Surge (Non-repetitive)
Forward Current (IFSM) – Amps
Maximum Allowable Case
Temperature (TC) - °C
120
115
110
105
100
Dxx25L
95
Dxx15L
90
85
80
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
75
2
4
6
8
Dxx20L
Dxx15L
10
Dxx20L
1
70
0
Dxx25L
100
10
12
14
16
1
18
10
100
1000
Surge Current Duration -- Full Cycles
Average Forward Current [IF(AVE)] - Amps
Supply Frequency: 60Hz Sinusoidal
Load: Resistive
RMS Forward Current : [IT(RMS)]: Maximum Rated
Value at Specific Case Temperature
Note: xx = voltage
Soldering Parameters
Pre Heat
Pb – Free assembly
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp)
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/02/16
tP
TP
Temperature
Reflow Condition
Ramp-up
TL
tL
TS(max)
Preheat
TS(min)
25
Ramp-do
Ramp-down
tS
time to peak temperature
Time
Teccor® brand Thyristors
15 / 20 / 25 Amp Rectifiers
Physical Specifications
Environmental Specifications
Test
Terminal Finish
100% Matte Tin Plated
Body Material
UL recognized epoxy meeting flammability
classification 94V-0
Lead Material
Copper Alloy
Design Considerations
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of the rectifier. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
Specifications and Conditions
MIL-STD-750: Method 1040, Condition A
Rated VRRM, 125°C, 1008 hours
MIL-STD-750: Method 1051
Temperature Cycling
-40°C to 150°C, 15-minute dwell,
100 cycles
Biased Temperature & EIA/JEDEC: JESD22-A101
Humidity
320VDC, 85°C, 85%RH, 1008 hours
MIL-STD-750: Method 1031
High Temp Storage
150°C, 1008 hours
High Temperature
Voltage Blocking
Low-Temp Storage
1008 hours; -40°C
Resistance to
Solder Heat
MIL-STD-750: Method 2031
260°C, 10 seconds
Solderability
ANSI/J-STD-002, Category 3, Test A
Lead Bend
MIL-STD-750: Method 2036, Condition E
Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab
TC MEASURING POINT
O
A
E
P
AREA (REF.) 0.17 IN2
8.13
.320
Dimension
A
B
C
13.36
.526
D
7.01
.276
F
R
G
L
H
CATHODE
ANODE Not Used
K
J
N
M
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
Inches
Millimeters
Min
Max
Min
Max
0.380
0.420
9.65
10.67
B
0.105
0.115
2.67
2.92
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
G
0.540
0.575
13.72
14.61
H
0.025
0.035
0.64
0.89
J
0.195
0.205
4.95
5.21
K
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/02/16
Teccor® brand Thyristors
15 / 20 / 25 Amp Rectifiers
Product Selector
Voltage
Part Number
Type
Package
X
Rectifier
TO-220L
X
X
Rectifier
TO-220L
X
X
Rectifier
TO-220L
400V
600V
800V
1000V
Dxx15L
X
X
X
Dxx20L
X
X
Dxx25L
X
X
Note: xx = Voltage
Packing Options
Part Number
Marking
Weight
Packing Mode
Base Quantity
Dxx15LTP
Dxx15L
2.2 g
Tube
500 (50 per tube)
Dxx20LTP
Dxx20L
2.2 g
Tube
500 (50 per tube)
Dxx25LTP
Dxx25L
2.2 g
Tube
500 (50 per tube)
Note: xx = Voltage
Part Numbering System
Part Marking System
D 60 15 L 59
DEVICE TYPE
D: Rectifier
TO-220AB - (L Package)
LEAD FORM DIMENSIONS
xx: Lead Form Option
VOLTAGE RATING
40: 400V
60: 600V
80: 800V
K0: 1000V
CURRENT RATING
15: 15A
20: 20A
25: 25A
D6015L
YMXXX
Date Code Marking
PACKAGE TYPE
L: TO-220 (Isolated)
®
K
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/02/16
A
not
used
Y:Year Code
M: Month Code
XXX: Lot Trace Code
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement