Modular devices

Modular devices
Modular
devices
At the customer’s service
SALES DEPARTMENT
Tel. +39 035 4282354
Fax +39 035 4282400
[email protected]
TECHNICAL SUPPORT AND CUSTOMER CARE
Tel. +39 035 4282422
Fax +39 035 4282295
[email protected]
HEAD OFFICE
Via Don E.Mazza, 12 - 24020 Gorle, Bergamo, Italy
Tel. +39 035 4282111
Fax +39 035 4282200
[email protected]
www.LovatoElectric.com
Multimedia information about the company and its
history.
News and updates on the product range.
Library with download of catalogues, brochures, technical
instructions and software.
COMPANY VIDEO
HEAD OFFICE IN GORLE (BERGAMO), ITALY
The products illustrated in this publication are subject to be revised or improved at any moment. Catalogue descriptions, technical and operational
data as well as other details herein specified do not have any contractual value so must be considered only as indication. The products must be installed
and used by qualified personnel and in compliance with the regulations in force for electrical systems in order to avoid damages and safety hazards.
INDEX
page
I
OFF
ON
0
13(
5
1
A1
2
24V
6
RCBOs
12
RCCBs
13
Earth leakage relays and toroids
16
Surge protection devices
17
Motor protection circuit breakers
18
Fuse holders
19
Switch disconnectors
20
Modular contactors
21
Time relays
22
Protection relays
23
Switching power supplies
24
Micro PLC
24
Rotary cam switches
25
Energy meters
26
Measuring instruments
28
Power analyzers
30
Current transformers
31
7)
3
1
5.10
CN2
MCBs
3
4
5
6
13
14
(7)
(8)
A2
0Hz
50/6
2
lar
Modu
ctor
conta
S2
L
S1
K
J-29
-K
P1
MCBs
MINIATURE CIRCUIT BREAKERS UP TO 63A
- In 1-63A
- Breaking capacity: 10kA (6kA for 1P+N)
- Tripping characteristic: B, C, D
- Versions: 1P, 1P+N, 2P, 3P, 4P
- Standards: IEC/EN 60898-1, IEC/EN 60947-2.
EARTH LEAKAGE RELAYS AND TOROIDS
- 1 operation threshold
- External or incorporated toroidal
transformer
- Fixed or adjustable tripping In and
delay time.
TOROIDAL CURRENT TRANSFORMERS
- Solid or split core
- 35mm to 210mm diameter.
4
MINIATURE CIRCUIT BREAKERS UP TO 125A
- In 80-125A
- Breaking capacity: 10kA
- Tripping characteristic: C
- Versions: 1P, 2P, 3P, 4P
- Standards: IEC/EN 60898-1, IEC/EN 60947-2.
SURGE PROTECTION DEVICES
- Type 1 and 2
- Monoblock or with plug-in cartridge
versions
- 1P, 1P+N, 2P, 3P, 3P+N, 4P versions
- SPD status indicator
- Versions with and without contact
for remote status indicator signalling.
MOTOR PROTECTION CIRCUIT BREAKERS
- Thermal trip adjustment ranges
0.1-32A
- IEC breaking capacity Icu at 400V:
• 100kA (ranges 0.1-10A)
• 25kA (ranges 9-32A).
FUSE HOLDERS
- Version without indicator:
1P, 1P+N, 2P, 3P, 3P+N
- Version with indicator: 1P
- For fuses 10x38, 14x51 and 22x58mm
IEC class gG or aM
- Rated current: 32A, 50A, 125A
- Rated voltage: 690VAC.
SWITCH DISCONNECTORS
- Rated current: 16 to 125A
- Rated voltage: 1000VAC
- Add-on fourth pole
- Padlockable in “0” with no extra
accessories.
MODULAR CONTACTORS
- Two, three and four pole version
- IEC rated current Ith: 20 to 63A
- Operation flag indicator
- Very silent during operation or
control stage.
MODULAR
DEVICES
RCBOs
RESIDUAL CURRENT THERMOMAGNETIC
CIRCUIT BREAKERS
- In 25-40A
- Breaking capacity: 10kA
- Tripping characteristic: C
- Versions: 1P+N
- Standards: IEC/EN 61009-1.
TIME RELAYS
- On delay time, multifunction or
staircase time relay versions
- Multiscale and multifunction
- Selectable time ranges on front:
0.1 second - 10 days.
RCCBs
RESIDUAL CURRENT CIRCUIT
BREAKERS
- In 25-63A
- Type: AC and A
- Versions: 2P, 4P
- Standards: IEC/EN 61008-1.
PROTECTION RELAYS
VOLTAGE MONITORING RELAY
- Three-phase system, with or without
neutral
- Minimum and maximum AC voltage
- Phase loss, neutral loss and incorrect
phase sequence.
CURRENT MONITORING RELAY
- Single-phase system
- AC/DC minimum or maximum current
control.
SWITCHING POWER SUPPLIES
- Single phase
- Output voltage: 12 or 24VDC
- Output power: 10-100W.
MICRO PLCS
- 10, 12 and 20 In-Out base units
- 24VDC or 100-240VAC power
supply
- Relay outputs
- Expansion module with analog
outputs
- Modbus®-RTU communication
module.
METERING INSTRUMENTS AND CTS
ENERGY METERS
- Single phase, three phase with
neutral, three phase with or
without neutral
- Direct connection or by CTs
- MID certified versions.
ROTARY CAM SWITCHES
- Rated current: 16A
- Rated voltage: 1000VAC.
MEASURING DEVICES
- Voltmeter, ammeter, frequency
meter and cosphi meter for
single or three phase systems.
CURRENT TRANSFORMERS
- Primary current: 50-400A
- Secondary current: 5A.
POWER ANALYZERS
- Graphic 128x80 pixel LCD
- Expandable versions.
5
Miniature circuit breakers and residual current devices
Miniature circuit breakers - 1 to 63A
MCBs
1P - 10kA
Order code
Characteristic
In
Icn
Qty
per
pkg
Curve
[A]
[kA] n°
Wt
[kg]
Thermomagnetic circuit breakers - 1P - characteristic B.
P1 MB 1P...
P1 MB 1P B01
B
1
10
12
0.115
P1 MB 1P B02
B
2
10
12
0.115
P1 MB 1P B04
B
4
10
12
0.115
P1 MB 1P B06
B
6
10
12
0.115
P1 MB 1P B10
B
10
10
12
0.115
P1 MB 1P B16
B
16
10
12
0.115
P1 MB 1P B20
B
20
10
12
0.115
P1 MB 1P B25
B
25
10
12
0.115
P1 MB 1P B32
B
32
10
12
0.115
P1 MB 1P B40
B
40
10
12
0.115
P1 MB 1P B50
B
50
10
12
0.115
P1 MB 1P B63
B
63
10
12
0.115
General characteristics
– Ratings 1 to 63A
– Pole width 18mm
– Positive indication with flag window
– Tripping characteristics B, C and D
– Mounting on 35mm DIN rail (IEC/EN 60715)
– Add-on blocks available.
Operational characteristics
– Rated insulation voltage Ui: 440V
– Rated impulse withstand voltage Uimp: 4kV
– Rated operating voltage Ue: 230/400VAC.
Certifications and compliance
Certifications obtained: TUV and UL Recognized for USA
and Canada (cURus - File E359585) as ProtectorsComponents; products having this type of marking are
intended for use components of complete workshopassembled equipment.
Compliant with standards: IEC/EN 60898-1,
IEC/EN 60947-2, UL 1077, CSA C22.2 n°235.
Thermomagnetic circuit breakers - 1P - characteristic C.
P1 MB 1P C01
C
1
10
12
0.115
P1 MB 1P C02
C
2
10
12
0.115
P1 MB 1P C04
C
4
10
12
0.115
P1 MB 1P C06
C
6
10
12
0.115
P1 MB 1P C10
C
10
10
12
0.115
P1 MB 1P C16
C
16
10
12
0.115
P1 MB 1P C20
C
20
10
12
0.115
P1 MB 1P C25
C
25
10
12
0.115
P1 MB 1P C32
C
32
10
12
0.115
P1 MB 1P C40
C
40
10
12
0.115
P1 MB 1P C50
C
50
10
12
0.115
P1 MB 1P C63
C
63
10
12
0.115
Thermomagnetic circuit breakers - 1P - characteristic D.
MCBs
1P+N - 6kA
P1 MB 1P D01 D
1
10
12
0.115
P1 MB 1P D02 D
2
10
12
0.115
P1 MB 1P D04 D
4
10
12
0.115
P1 MB 1P D06 D
6
10
12
0.115
P1 MB 1P D10 D
10
10
12
0.115
P1 MB 1P D16 D
16
10
12
0.115
P1 MB 1P D20 D
20
10
12
0.115
P1 MB 1P D25 D
25
10
12
0.115
P1 MB 1P D32 D
32
10
12
0.115
P1 MB 1P D40 D
40
10
12
0.115
P1 MB 1P D50 D
50
10
12
0.115
P1 MB 1P D63 D
63
10
12
0.115
Order code
Characteristic
In
Icn
Qty
per
pkg
Wt
Curve
[A]
[kA] n°
[kg]
Thermomagnetic circuit breakers - 1P+N - characteristic C.
P1 MB 1N...
6
P1 MB 1N C01 C
1
6
6
0.190
P1 MB 1N C02 C
2
6
6
0.190
P1 MB 1N C04 C
4
6
6
0.190
P1 MB 1N C06 C
6
6
6
0.190
P1 MB 1N C10 C
10
6
6
0.190
P1 MB 1N C16 C
16
6
6
0.190
P1 MB 1N C20 C
20
6
6
0.190
P1 MB 1N C25 C
25
6
6
0.190
P1 MB 1N C32 C
32
6
6
0.190
P1 MB 1N C40 C
40
6
6
0.190
P1 MB 1N C50 C
50
6
6
0.190
P1 MB 1N C63 C
63
6
6
0.190
General characteristics
– Ratings 1 to 63A
– Pole width 18mm
– Positive indication with flag window
– Tripping characteristics C
– Mounting on 35mm DIN rail (IEC/EN 60715)
– Add-on blocks available.
Operational characteristics
– Rated insulation voltage Ui: 440V
– Rated impulse withstand voltage Uimp: 4kV
– Rated operating voltage Ue: 230/400VAC.
Certifications and compliance
Certifications obtained: TUV and UL Recognized for USA
and Canada (cURus - File E359585) as ProtectorsComponents; products having this type of marking are
intended for use components of complete workshopassembled equipment.
Compliant with standards: IEC/EN 60898-1,
IEC/EN 60947-2, UL 1077, CSA C22.2 n°235.
Miniature circuit breakers and residual current devices
Miniature circuit breakers - 1 to 63A
MCBs
2P - 10kA
Order code
Characteristic
In
Icn
Qty
per
pkg
Curve
[A]
[kA] n°
Wt
[kg]
Thermomagnetic circuit breakers - 2P - characteristic B.
P1 MB 2P...
P1 MB 2P B01
B
1
10
6
0.230
P1 MB 2P B02
B
2
10
6
0.230
P1 MB 2P B04
B
4
10
6
0.230
P1 MB 2P B06
B
6
10
6
0.230
P1 MB 2P B10
B
10
10
6
0.230
P1 MB 2P B16
B
16
10
6
0.230
P1 MB 2P B20
B
20
10
6
0.230
P1 MB 2P B25
B
25
10
6
0.230
P1 MB 2P B32
B
32
10
6
0.230
P1 MB 2P B40
B
40
10
6
0.230
P1 MB 2P B50
B
50
10
6
0.230
P1 MB 2P B63
B
63
10
6
0.230
General characteristics
– Ratings 1 to 63A
– Pole width 18mm
– Positive indication with flag window
– Tripping characteristics B, C and D
– Mounting on 35mm DIN rail (IEC/EN 60715)
– Add-on blocks available.
Operational characteristics
– Rated insulation voltage Ui: 440V
– Rated impulse withstand voltage Uimp: 4kV
– Rated operating voltage Ue: 230/400VAC.
Certifications and compliance
Certifications obtained: TUV and UL Recognized for USA
and Canada (cURus - File E359585) as ProtectorsComponents; products having this type of marking are
intended for use components of complete workshopassembled equipment.
Compliant with standards: IEC/EN 60898-1,
IEC/EN 60947-2, UL 1077, CSA C22.2 n°235.
Thermomagnetic circuit breakers - 2P - characteristic C.
P1 MB 2P C01
C
1
10
6
0.230
P1 MB 2P C02
C
2
10
6
0.230
P1 MB 2P C04
C
4
10
6
0.230
P1 MB 2P C06
C
6
10
6
0.230
P1 MB 2P C10
C
10
10
6
0.230
P1 MB 2P C16
C
16
10
6
0.230
P1 MB 2P C20
C
20
10
6
0.230
P1 MB 2P C25
C
25
10
6
0.230
P1 MB 2P C32
C
32
10
6
0.230
P1 MB 2P C40
C
40
10
6
0.230
P1 MB 2P C50
C
50
10
6
0.230
P1 MB 2P C63
C
63
10
6
0.230
Thermomagnetic circuit breakers - 2P - characteristic D.
P1 MB 2P D01 D
1
10
6
0.230
P1 MB 2P D02 D
2
10
6
0.230
P1 MB 2P D04 D
4
10
6
0.230
P1 MB 2P D06 D
6
10
6
0.230
P1 MB 2P D10 D
10
10
6
0.230
P1 MB 2P D16 D
16
10
6
0.230
P1 MB 2P D20 D
20
10
6
0.230
P1 MB 2P D25 D
25
10
6
0.230
P1 MB 2P D32 D
32
10
6
0.230
P1 MB 2P D40 D
40
10
6
0.230
P1 MB 2P D50 D
50
10
6
0.230
P1 MB 2P D63 D
63
10
6
0.230
7
Miniature circuit breakers and residual current devices
Miniature circuit breakers - 1 to 63A
MCBs
3P - 10kA
Order code
Characteristic
In
Icn
Qty
per
pkg
Curve
[A]
[kA] n°
Wt
[kg]
Thermomagnetic circuit breakers - 3P - characteristic B.
P1 MB 3P...
P1 MB 3P B01
B
1
10
4
0.345
P1 MB 3P B02
B
2
10
4
0.345
P1 MB 3P B04
B
4
10
4
0.345
P1 MB 3P B06
B
6
10
4
0.345
P1 MB 3P B10
B
10
10
4
0.345
P1 MB 3P B16
B
16
10
4
0.345
P1 MB 3P B20
B
20
10
4
0.345
P1 MB 3P B25
B
25
10
4
0.345
P1 MB 3P B32
B
32
10
4
0.345
P1 MB 3P B40
B
40
10
4
0.345
P1 MB 3P B50
B
50
10
4
0.345
P1 MB 3P B63
B
63
10
4
0.345
Thermomagnetic circuit breakers - 3P - characteristic C.
P1 MB 3P C01
C
1
10
4
0.345
P1 MB 3P C02
C
2
10
4
0.345
P1 MB 3P C04
C
4
10
4
0.345
P1 MB 3P C06
C
6
10
4
0.345
P1 MB 3P C10
C
10
10
4
0.345
P1 MB 3P C16
C
16
10
4
0.345
P1 MB 3P C20
C
20
10
4
0.345
P1 MB 3P C25
C
25
10
4
0.345
P1 MB 3P C32
C
32
10
4
0.345
P1 MB 3P C40
C
40
10
4
0.345
P1 MB 3P C50
C
50
10
4
0.345
P1 MB 3P C63
C
63
10
4
0.345
Thermomagnetic circuit breakers - 3P - characteristic D.
8
P1 MB 3P D01 D
1
10
4
0.345
P1 MB 3P D02 D
2
10
4
0.345
P1 MB 3P D04 D
4
10
4
0.345
P1 MB 3P D06 D
6
10
4
0.345
P1 MB 3P D10 D
10
10
4
0.345
P1 MB 3P D16 D
16
10
4
0.345
P1 MB 3P D20 D
20
10
4
0.345
P1 MB 3P D25 D
25
10
4
0.345
P1 MB 3P D32 D
32
10
4
0.345
P1 MB 3P D40 D
40
10
4
0.345
P1 MB 3P D50 D
50
10
4
0.345
P1 MB 3P D63 D
63
10
4
0.345
General characteristics
– Ratings 1 to 63A
– Pole width 18mm
– Positive indication with flag window
– Tripping characteristics B, C and D
– Mounting on 35mm DIN rail (IEC/EN 60715)
– Add-on blocks available.
Operational characteristics
– Rated insulation voltage Ui: 440V
– Rated impulse withstand voltage Uimp: 4kV
– Rated operating voltage Ue: 230/400VAC.
Certifications and compliance
Certifications obtained: TUV and UL Recognized for USA
and Canada (cURus - File E359585) as ProtectorsComponents; products having this type of marking are
intended for use components of complete workshopassembled equipment.
Compliant with standards: IEC/EN 60898-1,
IEC/EN 60947-2, UL 1077, CSA C22.2 n°235.
Miniature circuit breakers and residual current devices
Miniature circuit breakers - 1 to 63A
MCBs
4P - 10kA
Order code
Characteristic
In
Icn
Qty
per
pkg
Curve
[A]
[kA] n°
Wt
[kg]
Thermomagnetic circuit breakers - 4P - characteristic B.
P1 MB 4P...
P1 MB 4P B01
B
1
10
3
0.460
P1 MB 4P B02
B
2
10
3
0.460
P1 MB 4P B04
B
4
10
3
0.460
P1 MB 4P B06
B
6
10
3
0.460
P1 MB 4P B10
B
10
10
3
0.460
P1 MB 4P B16
B
16
10
3
0.460
P1 MB 4P B20
B
20
10
3
0.460
P1 MB 4P B25
B
25
10
3
0.460
P1 MB 4P B32
B
32
10
3
0.460
P1 MB 4P B40
B
40
10
3
0.460
P1 MB 4P B50
B
50
10
3
0.460
P1 MB 4P B63
B
63
10
3
0.460
General characteristics
– Ratings 1 to 63A
– Pole width 18mm
– Positive indication with flag window
– Tripping characteristics B, C and D
– Mounting on 35mm DIN rail (IEC/EN 60715)
– Add-on blocks available.
Operational characteristics
– Rated insulation voltage Ui: 440V
– Rated impulse withstand voltage Uimp: 4kV
– Rated operating voltage Ue: 230/400VAC.
Certifications and compliance
Certifications obtained: TUV and UL Recognized for USA
and Canada (cURus - File E359585) as ProtectorsComponents; products having this type of marking are
intended for use components of complete workshopassembled equipment.
Compliant with standards: IEC/EN 60898-1,
IEC/EN 60947-2, UL 1077, CSA C22.2 n°235.
Thermomagnetic circuit breakers - 4P - characteristic C.
P1 MB 4P C01
C
1
10
3
0.460
P1 MB 4P C02
C
2
10
3
0.460
P1 MB 4P C04
C
4
10
3
0.460
P1 MB 4P C06
C
6
10
3
0.460
P1 MB 4P C10
C
10
10
3
0.460
P1 MB 4P C16
C
16
10
3
0.460
P1 MB 4P C20
C
20
10
3
0.460
P1 MB 4P C25
C
25
10
3
0.460
P1 MB 4P C32
C
32
10
3
0.460
P1 MB 4P C40
C
40
10
3
0.460
P1 MB 4P C50
C
50
10
3
0.460
P1 MB 4P C63
C
63
10
3
0.460
Thermomagnetic circuit breakers - 4P - characteristic D.
P1 MB 4P D01 D
1
10
3
0.460
P1 MB 4P D02 D
2
10
3
0.460
P1 MB 4P D04 D
4
10
3
0.460
P1 MB 4P D06 D
6
10
3
0.460
P1 MB 4P D10 D
10
10
3
0.460
P1 MB 4P D16 D
16
10
3
0.460
P1 MB 4P D20 D
20
10
3
0.460
P1 MB 4P D25 D
25
10
3
0.460
P1 MB 4P D32 D
32
10
3
0.460
P1 MB 4P D40 D
40
10
3
0.460
P1 MB 4P D50 D
50
10
3
0.460
P1 MB 4P D63 D
63
10
3
0.460
9
Miniature circuit breakers and residual current devices
Miniature circuit breakers - 80 to 125A
MCBs
1P, 2P, 3P and 4P - 10kA
Order code
Characteristic
In
Icn
Qty
per
pkg
Curve
[A]
[kA] n°
Wt
[kg]
Thermomagnetic circuit breakers - 1P - characteristic C.
P2 MB 1P C080 C
80
10❶ 8
0.166
P2 MB 1P C100 C
100
10❶ 8
0.166
P2 MB 1P C125 C
125
10❶ 8
0.166
Thermomagnetic circuit breakers - 2P - characteristic C.
P2 MB 2P C080 C
80
10
4
0.340
P2 MB 2P C100 C
100
10
4
0.340
P2 MB 2P C125 C
125
10
4
0.340
Thermomagnetic circuit breakers - 3P - characteristic C.
P2 MB 1P...
P2 MB 3P C080 C
80
10
3
0.510
P2 MB 3P C100 C
100
10
3
0.510
P2 MB 3P C125 C
125
10
3
0.510
Thermomagnetic circuit breakers - 4P - characteristic C.
P2 MB 4P C080 C
80
10
2
0.680
P2 MB 4P C100 C
100
10
2
0.680
P2 MB 4P C125 C
125
10
2
0.680
❶
P2 MB 2P...
P2 MB 3P...
P2 MB 4P...
10
Icn at 230V.
General characteristics
– Ratings 80 to 125A
– 1P, 2P, 3P and 4P versions
– Pole width 27mm
– Positive indication with flag window
– Tripping characteristics C
– Mounting on 35mm DIN rail (IEC/EN 60715)
– Add-on blocks available.
Operational characteristics
– Rated insulation voltage Ui: 400V
– Rated impulse withstand voltage Uimp: 4kV
– Rated operating voltage Ue: 230/400VAC.
Certifications and compliance
Certifications obtained: TUV and UL Recognized for USA
and Canada (cURus - File E359585) as ProtectorsComponents; products having this type of marking are
intended for use components of complete workshopassembled equipment.
Compliant with standards: IEC/EN 60947-2, UL 1077,
CSA C22.2 n°235.
Miniature circuit breakers and residual current devices
Add-on blocks and accessories for miniature circuit breakers
Add-on blocks for
miniature circuit breakers
from 1 to 63A
Order code
Characteristics
Qty max
Qty
per circuit per
breaker
pkg
Wt
General characteristics
– Auxiliary and indicator contact width 9mm
– Undervoltage and shunt trip release width 18mm
– Installation on the left side of circuit breaker.
n°
[kg]
1
1
0.04
Operational characteristics
– Rated impulse withstand voltage Uimp: 4kV
– AC rated operating current: 6A 230V - 3A 400V.
1
1
0.04
Certifications and compliance
Certifications obtained: TUV (auxiliary contacts).
Compliant with standards: IEC/EN 60947-5-1.
1
1
0.09
P1X 16230
110-415V 50/60Hz 1
1
0.09
Order code
Characteristics
Auxiliary contact.
P1X 1011
Side mount
1 changeover
Indicator contact.
P1X 1311
Side mount
1 changeover
Undervoltage trip release.
P1X 14230
230V 50/60Hz
Shunt trip release.
P1X 1011
P1X 16230
Add-on blocks for
miniature circuit breakers
from 80 to 125A
Qty max
Qty
per circuit per
breaker
pkg
Wt
General characteristics
– Auxiliary and indicator contact width 9mm
– Undervoltage and shunt trip release width 18mm
– Installation: auxiliary contacts on left side and shunt
trip release on right side.
n°
[kg]
1
1
0.04
Operational characteristics
– Rated impulse withstand voltage Uimp: 4kV
– AC rated operating current: 6A 230V - 3A 400V.
1
1
0.04
Certifications and compliance
Certifications obtained: TUV (auxiliary contacts).
Compliant with standards: IEC/EN 60947-5-1.
110-415V 50/60Hz 1
1
0.09
Qty
per
pkg
Wt
Auxiliary contact.
P2X 1011
Side mount
1 changeover
Indicator contact.
P2X 1311
Side mount
1 changeover
Shunt trip release.
P2X 16230
P2X 1311
P2X 1311
Accessories
P1X 90 33
Order
code
Description
[A]
n°
[kg]
P1X 90 31
Single-phase connection
busbar, for 57 modules
in total, 1m long
(57 MCB 1P)
10
0.240
P1X 90 33
Three-phase connection
busbar, for 57 modules
in total, 1m long
(19 MCB 3P)
10
0.465
P1X 91 30
Safety cover for unused
busbar terminals
25
0.010
P1X 91 31
End cap for P1X 90 31
busbar
50
0.001
P1X 91 33
End cap for P1X 90 33
busbar
50
0.001
P1X 92 01
One-pole terminal for
25mm2 max conductor
25
0.010
P1X 92 02
One-pole terminal for
50mm2 max conductor
25
0.020
P1X 91 33
P1X 92 01
P1X 1011
P2X 1011
P1X 92 02
P1X 1311
P2X 1311
P1X 14230
General and operational characteristics
SINGLE-PHASE BUSBAR
– Central point of power supply: 100A max
– Side point of power supply: 63A max
– Pitch: 18mm
– Busbar section: 10mm2
– Number of modules/poles: 57
– For paralleling connection
– Length (standard supplied): 1m which can be cut in
shorter sections.
THREE-PHASE BUSBAR
– Central point of power supply: 100A max
– Side point of power supply: 63A max
– Pitch: 18mm
– Busbar section: 10mm2
– Number of modules/poles: 57 (19 three-pole MCB)
– For paralleling connection
– Length (standard supplied): 1m which can be cut in
shorter sections.
P1X 16230
P2X 16230
11
Miniature circuit breakers and residual current devices
Residual current thermomagnetic circuit breakers
RCBOs
1P+N - 10kA
Order code
Char.
In
Curve [A]
Icn
IΔn Qty Wt
per
pkg
[kA] [mA] n°
[kg]
Residual current thermomagnetic circuit breakers - 1P+N type AC.
P1 RB 1N...
P1 RB 1N C06 AC030 C
6
10
30
6
0.205
P1 RB 1N C06 AC300 C
6
10
300 6
0.205
P1 RB 1N C10 AC030 C
10
10
30
0.205
P1 RB 1N C10 AC300 C
10
10
300 6
0.205
P1 RB 1N C16 AC030 C
16
10
30
0.205
P1 RB 1N C16 AC300 C
16
10
300 6
0.205
P1 RB 1N C20 AC030 C
20
10
30
0.205
P1 RB 1N C20 AC300 C
20
10
300 6
0.205
P1 RB 1N C25 AC030 C
25
10
30
0.205
P1 RB 1N C25 AC300 C
25
10
300 6
0.205
P1 RB 1N C32 AC030 C
32
10
30
0.205
P1 RB 1N C32 AC300 C
32
10
300 6
0.205
P1 RB 1N C40 AC030 C
40
10
30
6
0.205
P1 RB 1N C40 AC300 C
40
10
300 6
0.205
6
6
6
6
6
Residual current thermomagnetic circuit breakers - 1P+N type A.
12
P1 RB 1N C06 A030
C
6
10
30
6
0.205
P1 RB 1N C06 A300
C
6
10
300 6
0.205
P1 RB 1N C10 A030
C
10
10
30
0.205
P1 RB 1N C10 A300
C
10
10
300 6
0.205
P1 RB 1N C16 A030
C
16
10
30
0.205
P1 RB 1N C16 A300
C
16
10
300 6
0.205
P1 RB 1N C20 A030
C
20
10
30
0.205
P1 RB 1N C20 A300
C
20
10
300 6
0.205
P1 RB 1N C25 A030
C
25
10
30
0.205
P1 RB 1N C25 A300
C
25
10
300 6
0.205
P1 RB 1N C32 A030
C
32
10
30
0.205
P1 RB 1N C32 A300
C
32
10
300 6
0.205
P1 RB 1N C40 A030
C
40
10
30
6
0.205
P1 RB 1N C40 A300
C
40
10
300 6
0.205
6
6
6
6
6
General characteristics
– Ratings 6 to 40A
– 1P+N version
– Pole width 18mm
– Positive indication with flag window
– Tripping characteristics C
– Mounting on 35mm DIN rail (IEC/EN 60715).
Operational characteristics
– Rated insulation voltage Ui: 400V
– Rated impulse withstand voltage Uimp: 4kV
– Rated operating voltage Uc: 230V
– Residual current off time ≤0.1s
– Rated residual operating current IΔn: 30mA, 300mA
– Rated short-circuit capacity Icn: 10kA.
Certifications and compliance
Certifications obtained: TUV.
Compliant with standards: IEC/EN 61009-1.
Miniature circuit breakers and residual current devices
Residual current circuit breakers
RCCBs
2P and 4P
Order code
Type
In
Idn
Qty Wt
per
pkg
[A]
[mA] n°
[kg]
0.185
Residual current devices - 2P - type AC.
P1 RC 2P 25 AC030
AC
25
30
6
P1 RC 2P 25 AC300
AC
25
300
6
0.185
P1 RC 2P 40 AC030
AC
40
30
6
0.185
P1 RC 2P 40 AC300
AC
40
300
6
0.185
P1 RC 2P 63 AC030
AC
63
30
6
0.185
P1 RC 2P 63 AC300
AC
63
300
6
0.185
6
0.185
Residual current devices - 2P - type A.
P1 RC 2P...
P1 RC 2P 25 A030
A
25
30
P1 RC 2P 25 A300
A
25
300
6
0.185
P1 RC 2P 40 A030
A
40
30
6
0.185
P1 RC 2P 40 A300
A
40
300
6
0.185
P1 RC 2P 63 A030
A
63
30
6
0.185
P1 RC 2P 63 A300
A
63
300
6
0.185
0.326
General characteristics
– Ratings 25A, 40A, 63A
– Operating Idn: 30mA, 300mA
– A and AC type
– 2P and 4P versions
– Pole width 18mm
– Positive indication with flag window
– Mounting on 35mm DIN rail (IEC/EN 60715).
Operational characteristics
– Rated insulation voltage Ui: 400V
– Rated impulse withstand voltage Uimp: 4kV
– Rated operating voltage Uc: 230V (2P); 230/400V (4P).
Certifications and compliance
Certifications obtained: TUV (pending).
Compliant with standards: IEC/EN 61008-1.
Residual current devices - 4P - type AC.
P1 RC 4P...
P1 RC 4P 25 AC030
AC
25
30
3
P1 RC 4P 25 AC300
AC
25
300
3
0.326
P1 RC 4P 40 AC030
AC
40
30
3
0.326
P1 RC 4P 40 AC300
AC
40
300
3
0.326
P1 RC 4P 63 AC030
AC
63
30
3
0.326
P1 RC 4P 63 AC300
AC
63
300
3
0.326
0.326
Residual current devices - 4P - type A.
P1 RC 4P 25 A030
A
25
30
3
P1 RC 4P 25 A300
A
25
300
3
0.326
P1 RC 4P 40 A030
A
40
30
3
0.326
P1 RC 4P 40 A300
A
40
300
3
0.326
P1 RC 4P 63 A030
A
63
30
3
0.326
P1 RC 4P 63 A300
A
63
300
3
0.326
13
Miniature circuit breakers and residual current devices
Technical characteristics
MINIATURE CIRCUIT BREAKERS are devices used to protect against short circuits and overloads
of wiring installations and loads in panel board, office buildings, stores and similar
applications. Their purpose is the circuit protection, circuit isolation and load operation.
These devices have a fixed thermal and magnetic current tripping value, but they are
available with a large range of tripping currents.
P1 MB series is in compliance with IEC/EN 60898 standard that is intended for AC circuitbreakers for operating at a rated voltage not exceeding 440V. As far as possible, P1 MB
series is in compliance with standard IEC/EN 60947-2. This series of Miniature Circuit
Breakers (MCB) has rated current from 1 to 63A. It is in compliance with the UL 1077
standard specifically required in the U.S. market.
P1 MB MCB can be fitted with accessories like auxiliary contacts, signalling contacts,
undervoltage trip releases and shunt trip releases.
P2 MB series with its higher rated current range, from 80 to 125A, is intended specifically
for industrial applications so in compliance with IEC/EN 60947-2 standard. It is in
compliance with UL1077 too.
MCBs are available with ranges of instantaneous tripping B, C and D.
The meaning of these ranges is:
B = instantaneous tripping 3...5xIn
for non inductive or low inductive loads (heating resistors, generators, very long wire
lines)
C = instantaneous tripping 5...10xIn
for inductive loads (mixed loads resistive and inductive with low inrush current).
D = instantaneous tripping 10...14xIn
for high inductive loads (loads with high inrush current like motors).
TYPE
Standards
RESIDUAL CURRENT OPERATED CIRCUIT BREAKERS (RCCB – sometimes called RCD).
These devices are intended to protect persons against indirect contact (electrical shock).
They may be used to provide protection against fire hazards due to a persistent earth fault
current. To prevent electrical shock, RCCB must be rated with a IΔn not exceeding 30mA
so these devices trip in case of earth fault only. Usually they are connected in series with
MCBs which assure short circuit and overcurrent protection.
P1 RC series is in compliance with IEC/EN 61008-1 standard and has a range from 25 to
63A with IΔn of 30 or 300mA. It is available in two versions of tripping characteristics:
Type AC - tripping under earth fault is ensured for sinusoidal alternating currents, suddenly
applied or slowly rising. This version is suitable to detect sinusoidal residual current only.
Type AC is identified by this symbol:
Type A - tripping under earth fault is ensured for sinusoidal alternating currents and
pulsating currents, suddenly applied or slowly rising. This version, in addition to the
protection given by Type AC, protects against residual current with pulsating waveform.
This can be caused by circuit with electronic equipment.
Type A is identified by this symbol:
P1 RC is available in 2 pole and 4 pole version.
RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION (RCBO)
are devices simultaneously performing the function of detection and tripping in case of
residual current and circuit protection in case of short circuits and overcurrents.
Practically, they integrate the function of MCB with RCCB.
P1 RB series is in compliance with IEC/EN61009-1 standard and has a range from 6 to
40A with instantaneous tripping curve type C. It is available in 1P+N version, with IΔn of
30 or 300mA, Type AC or Type A.
P1 MB
P2 MB
P1 RB
P1 RC
IEC/EN 60898, IEC/EN 60947-2
IEC/EN 60947-2
IEC/EN 61009-1
IEC/EN 61008-1
400
Rated insulation voltage Ui
V
440
400
400
Rated impulse withstand voltage Uimp
kV
4
4
4
4
Rated operational voltage Ue
V
230 (1P, 1P+N) /
230/400 (2P, 3P, 4P)
230 (1P) /
230/400 (2P, 3P, 4P)
230
230 (2P) /
230/400(4P)
50/60
Rated frequency
Hz
50/60
50/60
50/60
Maximum rated current
A
63
125
40
40
Available rated current
A
1, 2, 4, 6, 10, 16,
20, 25, 32, 40, 50, 63
80, 100, 125
6, 10, 16, 20, 25, 32, 40
25, 40, 63
1P, 1P+N, 2P, 3P, 4P
1P, 2P, 3P, 4P
1P+N
2P, 4P
Tripping characteristic
Versions
B-C-D
C
C
—
Instantaneous tripping
curve B 3-5In
curve C 5-10In
curve D 10-14In
curve C 5-10In
curve C 5-10In
—
Short circuit capacity
Mechanical life
Maximum tightening of terminals
Min-max conductor section
kA
10 (6kA 1P+N)
10
10
—
cycles
20,000
10,000
20,000
20,000
Nm
2
3
2
2
lbin
15
26
15
15
Tool
Pz2
Pz2
Pz2
Pz2
mm2
1-16
2.5-50
1-25
1-35
AWG
14-6
14-1/0
16-3
16-2
AMBIENT CONDITIONS
Temperature
Operating
°C
-35...+70
-35...+75
-25...+40
-25...+55
Storage
°C
-40...+80
-40...+80
-35...+60
-35...+60
m
2,000
2,000
2,000
2,000
II
III
II
II
Maximum altitude
Pollution degree
Mounting
35mm DIN rail (IEC/EN 60715)
Residual current operating
characteristic
Rated residual operating current IΔn
14
mA
—
—
AC, A
AC, A
—
—
30, 300
30, 300
Miniature circuit breakers and residual current devices
Technical characteristics
TRIPPING CURVE
Curve B
Curve C
Curve D
10000
5000
1h
2000
1000
500
10000
5000
1h
2000
1000
500
10000
5000
1h
2000
1000
500
200
100
50
200
100
50
200
100
50
20
10
5
20
10
5
20
10
5
2
1
0.5
2
1
0.5
2
1
0.5
0.2
0.1
0.05
0.2
0.1
0.05
0.2
0.1
0.05
0.02
0.01
0.005
0.02
0.01
0.005
0.02
0.01
0.005
0.002
0.001
0.002
0.001
0.5
1
2
3 4 5 7 10
20 30 5070 100200
l/ln
0.002
0.001
0.5
1
2
3 4 5 7 10
20 30 5070 100200
l/ln
0.5
1
2
3 4 5 7 10
20 30 5070 100200
l/ln
Dimensions
P1 MB...
60 ±0.2
72 max
86.5 max
45 ±0.1
45 max
54 max
36 max
35 ±0.175
18 max
5.5 ±0.2
74 max
P2 MB...
27.7 ±0.2
65.5 ±0.4
49.5 ±0.3
107 ±0.5
80.1 ±0.4
53.4 ±0.3
80.3 ±0.4
44.8 ±0.3
36 ±0.3
84.5 ±1
5.5 ±0.2
60 ±0.3
68 ±1
P1X 1011
P1X 1311
P1X 14230
P1X 16230
P2X 1011
P2X 1311
P2X 14230
73.5 ±0.3
73.5 ±0.4
42.5
43
66 ±0.5
9 Max
17.8 ±0.3
5.4 ±0.2
5.3 ±0.1
44.8 ±0.2
78.8 ±0.3
79 ±0.4
45 ±0.3
45 ±0.5
P1 RC...
72max
5.5 ±0.3
60.5 ±0.7
45.1 ±0.4
35.9 ±0.5
80.2 ±0.5
60 ±0.3
5.5 ±0.3
45 ±0.4
44.3 ±0.3
82 max
36.2 ±0.4
9.2
81 ±0.5
P1 RB...
5.5 ±0.5
31.2
31.6
60.1 ±0.5
83 ±0.5
81 ±0.5
45 ±0.5
85.8 ±0.5
5.5 ±0.5
66 ±0.5
18 Max
60.4 ±0.5
49.7 ±0.7
15
Earth leakage relays and toroids
Relays with
1 operation threshold
Order code
Rated auxiliary
supply voltage
Output
contacts
[V]
Qty
per
pkg
Wt
n°
[kg]
1 OPERATION THRESHOLD.
Modular, 35mm DIN (IEC/EN 60715) rail mounting.
External CT. Fixed tripping set point and time.
RM1 415
110-240-415V
AC ❶
1
1
0.175
1 OPERATION THRESHOLD.
Modular, 35mm DIN (IEC/EN 60715) rail mounting.
External CT.
31 RM...
31 RM 415
110-240-415V
❶
1
1
0.190
1 OPERATION THRESHOLD.
Modular, 35 mm DIN (IEC/EN 60715) rail mounting.
Ø 28 mm incorporated CT. Configurable fail safe.
31 RMT 415
110-240-415V
❶
2❷
1
0.375
❶ Supply voltage:
110-125VAC (50/60Hz)/DC
220-240VAC (50/60Hz)
380-415VAC (50/60Hz).
❷ 2 output relays, each with 1 changeover contact.
Order code
Diameter
31 RT 35
Openable
Qty
per
pkg
n°
[kg]
35
No
1
0.200
31 RT 60
60
No
1
0.245
31 RT 80
80
No
1
0.410
31 RT 110
110
No
1
0.400
31 RT 210
210
No
1
1.200
31 RTA 110
110
Yes
1
0.540
31 RTA 210
210
Yes
1
1.820
[mm]
31 RT...
16
31 RT...
SETTINGS FOR RM1
– Selectable tripping set point (In): fixed 0.3A or 0.5A
– Selectable tripping time (t): fixed 0.02s or 0.5s
ADJUSTMENTS FOR RM AND RMT
– Configurable tripping 0.025-0.25A
set-point (In):
0.25-2.5A
2.5-25A
25-250A (with external
multiplier RX10 for RM only)
– Configurable tripping 0.02-0.5s
delay time (t):
0.2-5s
Reference standards
Compliant with standards: IEC/EN 60947-2.
31 RMT...
Toroidal current
transformers
General characteristics
– Earth leakage relay type A
– Configurable fail safe operation for RMT type only
– Green power LED indicator (ON)
– Red relay tripped LED indicator (TRIP)
– Front TEST and RESET buttons
– Configurable automatic or manual resetting
– Modular DIN 43880 housing, 2 module, with
transparent cover, suitable for fixing on 35mm DIN rail
(IEC/EN 60715)
– IEC degree of protection: IP20 terminals, IP40 on front
with cover.
Wt.
Reference standards
Compliant with standards: IEC/EN 60947-2.
For the full range of devices and all technical information please refer to our GENERAL CATALOGUE
Surge protection devices
Type 1 and 2
Order code
Pole
Contact DIN
arrange- remote size
available
ment
n°
Qty
per
pkg
Wt
n°
[kg]
MONOBLOCK VERSION.
IEC impulse current Iimp (10/350μs) 25kA per pole.
SA1 1P A320R
SA1 1P A320R
1P
YES
2
1
SA1 1N A320R
1P+N
YES
3
1
0.275
0.390
SA1 2P A320R
2P
YES
2
1
0.395
SA1 3P A320R
3P
YES
3
1
0.595
SA1 3N A320R
3P+N
YES
5
1
0.760
SA1 4P A320R
4P
YES
4
1
0.780
Main characteristics
The surge protection device type SA1 combines the
performance of SPD type 1 and 2 into a single product.
It protects against direct and indirect lightning strikes as
well as induced overvoltage conditions.
It can be installed in areas with a high risk of direct
lightning strikes, inside main distribution boards or subdistribution boards.
Operational characterstics
– IEC maximum continuous operating voltage Uc:
320VAC/420VDC
– IEC maximum discharge current Imax (8/20μs):
100kA per pole
– IEC rated discharge current In (8/20μs):
25kA per pole
– Standard-supplied contact type of remote status
indicator signalling
– IEC degree of protection: IP20.
Reference standards
Compliant with standards: IEC 61643-1, EN 61643-11.
SA1 3N A320R
Type 2
Order code
Pole
Contact DIN
arrange- remote size
available
ment
n°
Qty
per
pkg
Wt
n°
[kg]
VERSION WITH PLUG-IN CARTRIDGES.
IEC maximum discharge current Imax (8/20μs) 40kA per pole.
SA2 2P A320R
SA2 1P A320
1P
NO
1
1
0.140
SA2 1P A320R
1P
YES
1
1
0.145
SA2 1N A320
1P+N
NO
2
1
0.240
SA2 1N A320R
1P+N
YES
2
1
0.245
SA2 2P A320
2P
NO
2
1
0.260
SA2 2P A320R
2P
YES
2
1
0.265
SA2 3P A320
3P
NO
3
1
0.370
SA2 3P A320R
3P
YES
3
1
0.375
SA2 3N A320
3P+N
NO
4
1
0.465
SA2 3N A320R
3P+N
YES
4
1
0.470
SA2 4P A320
4P
NO
4
1
0.480
SA2 4P A320R
4P
YES
4
1
0.485
Order code
Pole
Contact DIN
arrange- remote size
available
ment
Qty
per
pkg
Wt
n°
[kg]
Main characteristics
The surge protection device type SA2 is suitable for
installation in sub-distribution boards and close to
terminal equipment.
It protects against indirect overvoltages.
The protection cartridges are plug-in and can be easily
replaced for quick servicing.
Operational characteristics
– IEC maximum continuous voltage Uc:
320VAC/420VDC
– IEC rated discharge current In (8/20μs):
20kA per pole
– Versions with or without contact type of remote status
indicator signalling
– IEC degree of protection: IP20.
Reference standards
Compliant with standards: IEC 61643-1, EN 61643-11.
SA2 3N A320R
Type 1 and 2
n°
VERSION WITH PLUG-IN CARTRIDGE.
IEC impulse current Iimp (10/350μs) 12.5kA per pole.
SA0 1P A320R
SA0 2P A320R
SA0 1P A320R
1P
YES
1
1
SA0 1N A320R
1P+N
YES
2
1
0.195
0.365
SA0 2P A320R
2P
YES
2
1
0.370
SA0 3P A320R
3P
YES
3
1
0.540
SA0 3N A320R
3P+N
YES
4
1
0.670
SA0 4P A320R
4P
YES
4
1
0.670
Main characteristics
The surge protection device type SA0 with plug-in
cartridge combines the performance of SPD type 1 and 2
into a single product. It is ideal in all those systems of
reduced extent to protect the load, side downstream of
main circuit breaker to terminal equipment.
It protects against direct and indirect lightning strikes as
well as induced overvoltage conditions. It can be installed
inside main distribution boards and close by terminal
equipment.
The protection cartridges are plug-in and can be easily
replaced for quick servicing.
Operational characteristics
– IEC maximum continuous operating voltage Uc:
320VAC/420VDC
– IEC maximum discharge current Imax (8/20μs):
60kA per pole
– IEC rated discharge current In (8/20μs):
25kA per pole
– IEC combined surge Uoc/Isc(1.2/50, 8/20μs):
10kV/5kA.
– Standard-supplied contact type of remote status
indicator signalling
– IEC degree of protection: IP20.
Reference standards
Compliant with standards: IEC 61643-1, EN 61643-11.
For the full range of devices and all technical information please refer to our GENERAL CATALOGUE
17
Motor protection circuit breakers
MPCBs from 0.1 to 32A
Order
code
Thermal
trip
adjustment
range
Short circuit Qty
breaking
per
capacity
pkg
at 400V
Icu
Ics
Wt
[A]
[kA]
[kg]
[kA] n°
IEC breaking capacity Icu100kA (0.1-10A) / 25kA (9-32A) at 400V.
Suitable for mounting in modular consumer switchboards ❶.
11 SM1C...
11 SM1C 00❶
0.1-0.16
100
100
5
0.278
11 SM1C 04❶
0.16-0.25
100
100
5
0.278
11 SM1C 08❶
0.25-0.4
100
100
5
0.278
11 SM1C 12❶
0.4-0.63
100
100
5
0.278
11 SM1C 16❶
0.63-1
100
100
5
0.278
11 SM1C 20❶
1-1.6
100
100
5
0.352
11 SM1C 24❶
1.6-2.5
100
100
5
0.352
11 SM1C 28❶
2.5-4
100
100
5
0.352
11 SM1C 32❶
4-6.5
100
100
5
0.352
11 SM1C 36❶
6.3-10
100
100
5
0.352
11 SM1C 40❶
9-14
25
12.5 5
0.352
11 SM1C 44❶
13-18
25
12.5 5
0.352
11 SM1C 48❶
17-23
25
12.5 5
0.352
11 SM1C 52❶
20-25
25
12.5 5
0.352
11 SM1C 56❶
24-32
25
12.5 5
0.352
❶ The SM1C version permits mounting in enclosures and modular
consumer switchboards with minimum depth of at least 45mm between
the DIN rail and the opening.
Order code
Characteristics
Qty
per
pkg
Wt
n°
[kg]
Add-on auxiliary contacts.
11 SMX12...
11 SMX12 11
Side mount 1NO+1NC
10
0.045
11 SMX13 11
Side-mount indicator
contacts for thermal and
magnetic tripping
1NO+1NC❶
10
0.045
11 SMX13 11
For all types
Operational characteristics
– IEC rated insulation voltage Ui: 690V
– IEC rated impulse withstand voltage: 6kV
– IEC rated frequency: 50/60Hz
– Maximum rated current: 32A
– Number of adjustment ranges:
SM1C: 15 (0.1 to 32A)
– Power dissipation: 2.2-9.7W
– Magnetic tripping: 12In max
– IEC thermal tripping class: 10A
– Phase failure / Single phase sensitive
– Mechanical life: 100,000 cycles
– Electrical life: 100,000 cycles
– Mounting on 35mm DIN rail (IEC/EN 60715)
– Mounting position: Any
– IEC utilisation category: A
– IEC degree of protection: IP20.
Certifications and compliance
Certifications obtained: UL Listed, for USA and Canada
(cULus - File E93602) as manual motor controller
suitable as motor disconnect; GOST.
Compliant with standards: IEC/EN 60947-1,
IEC/EN 60947-2, IEC/EN 60947-4-1, UL508,
CSA C22.2 n° 14.
2.3Nm/20lbin
max
1Nm/9lbin
max
®
ov
ato
TEST
Terminal block for busbar supply.
11 SMX90 30
General characteristics
The SM1 is a modern series of circuit breakers with
thermal and magnetic trip releases and high breaking
capacity. Motor control and protection, up to 15kW at
400V/20HP 480V/30HP 600V, are possible by choosing
the suitable adjustment range, 0.1 to 32A.
A magnetic trip indicator integrated on the SM1 breakers
avoids dangerous closing operations during short-circuit
conditions, previously disconnected by the breaker.
The SM1 types are suitable for isolation according to
IEC/EN 60947 standards.
Their high breaking capacity consents to exclude
protection fuses on the majority of the installations.
1Nm/9lbin
max
10
0.048
Three-phase connection busbars 45mm spacing.
11 SMX90 32
For 2 breakers without
side-mount contacts
10
0.027
11 SMX90 33
For 3 breakers without
side-mount contacts
10
0.050
11 SMX90 34
For 4 breakers without
side-mount contacts
10
0.071
11 SMX90 35
For 5 breakers without
side-mount contacts
10
0.092
NOTE: When more than one breaker are mounted, side by side, without
leaving space between each to consent free air circulation on the
breaker sides, and have simultaneous operation, the thermal trip
adjuster must be positioned at a value 15% higher than the rated motor
current.
Three-phase connection busbars 54mm spacing.
11 SMX90 42
For 2 breakers complete with 10
side-mount contacts
0.031
11 SMX90 43
For 3 breakers complete with 10
side-mount contacts
0.056
11 SMX90 44
For 4 breakers complete with 10
side-mount contacts
0.081
11 SMX90 45
For 5 breakers complete with 10
side-mount contacts
0.081
❶ Tripping is indicated by flag indicator on front.
18
For the full range of devices and all technical information please refer to our GENERAL CATALOGUE
Fuse holders
Status DIN
indicator size
Qty
per
pkg
Wt
n°
n°
[kg]
0.066
For 10x38mm fuses.
32A rated current at 690VAC.
FB01 A...
FB01 A 1PL
FB01 A 1P
1P
—
1
12
FB01 A 1PL
1P
YES
1
12
0.065
FB01 A 1M ❶
1P+N
—
1
12
0.062
FB01 A 1N
1P+N
—
2
6
0.134
FB01 A 2P
2P
—
2
6
0.132
FB01 A 3P
3P
—
3
4
0.188
FB01 A 3N
3P+N
—
4
3
0.260
Certifications and compliance
Certifications obtained:
For 14x51mm fuses.
50A rated current at 690VAC.
FB02 A...
FB02 A 1PL
FB02 A 1P
1P
—
1
12
FB02 A 1PL
1P
YES
1
12
0.114
FB02 A 1N
1P+N
—
2
6
0.237
FB02 A 2P
2P
—
2
6
0.224
FB02 A 3P
3P
—
3
4
0.335
FB02 A 3N
3P+N
—
4
3
0.460
●
●
––
Type
FB03 A 1P
1P
—
1
12
0.167
FB02 A...
––
––
●
FB03 A 1PL
1P
YES
1
12
0.167
FB03 A...
––
––
●
FB03 A 1N
1P+N
—
2
6
0.354
●
FB03 A 2P
2P
—
2
6
0.334
FB03 A 3P
3P
—
3
4
0.500
FB03 A 3N
3P+N
—
4
3
0.720
❶ Not UR certified.
FB03 A 1PL
FB01 A 1P, FB01 A 1PL,
FB01 A 1N
0.113
For 22x58mm fuses.
125A rated current at 690VAC.
FB03 A...
Operational characteristics
– IEC rated voltage Ue:
• 690VAC (FB01 A 1M excluded)
• 400VAC (FB01 A 1M only)
– IEC rated current Ie:
• FB01 A: 32A
• FB02 A: 50A
• FB03 A: 125A
– IEC utilisation category:
• FB01 A: AC22B 500V, AC21B 690V
(except FB01 A 1M: AC22B 400V)
• FB02 A: AC22B 500V, AC21B 690V
• FB03 A: AC21B 690V
– Suitable for IEC fuse class: gG and aM
– IEC degree of protection: IP20.
UL Recognized for
USA and Canada
(cULus - File E343395)
Pole
arrangement
CSA certified
(File 252040
class 6255)
Order
code
UL Recognized for USA
(UR - File E343395)
AC fuse holders
Certification obtained; UL designation as Fuseholders - Component
and CSA description as Fuseholder assemblies.
“UL Recognized”: Products having this type of marking
are intended for use as components of complete
workshop-assembled equipment.
Compliant with standards: IEC/EN 60269-1,
IEC/EN 60269-2, IEC/EN 60947-1, IEC/EN 60947-3,
UL 4248-1, UL 4248-4, CSA C22.2 n°4248.1,
CSA C22.2 n°4248.4.
For the full range of devices and all technical information please refer to our GENERAL CATALOGUE
19
Switch disconnectors
GA series 16A to 125A
[A]
[A]
Qty Wt
per
pkg
General characteristics
– 16A to 125A ratings
– Compact and modular size
– Screw or 35mm DIN (IEC/EN 60715) rail fixing
– Padlockable in 0 position with no extra accessory.
n°
Operational characteristics
– IEC rated insulation voltage Ui: 1000V
– IEC rated impulse withstand Uimp: 8kV
– Electrical life in IEC AC21A:
• 100,000 cycles for GA016-GA040
• 15,000 cycles for GA063 SA
• 30,000 cycles for GA063-GA125
– Mechanical life:
• 100,000 cycles for GA016-GA040-GA063 SA
• 30,000 cycles for GA063-GA125.
AC22A (≤690V)
AC23A (≤415V)
[kg]
Direct operating version, complete with black handle.
GA016 A...
GA040 A
GA063 SA
GA016 A
16
16
1
0.146
GA025 A
25
25
1
0.146
GA032 A
32
32
1
0.146
GA040 A
40
40
1
0.146
GA063 SA
63
45
1
0.148
GA063 A
63
63
1
0.388
GA080 A
80
80
1
0.388
GA100 A
100
100
1
0.388
GA125 A
125
125
1
0.388
GA063 A...
GA125 A
Certifications and compliance
Certifications obtained:
GA016 A...GA040 A
●
––
●
●
GA063 SA
●
––
●
––
GA063 A...GA125 A
––
●
●
●
Type
●
KEMA
IEC rated
operational
current Ie
GOST
IEC conventional free air
thermal
current Ith
AC21A
(≤690V)
cULus per UL98 /
CSA C22.2 n°4
UL Listed (File E328470)
Order code
cULus per UL508 /
CSA C22.2 n°14
UL Listed (File E93602)
Three-pole switch
disconnectors
Certification obtained, as manual motor controllers while UL
designation is general purpose switch for GA016/40 while
GA063/125 open type unfused switch.
Compliant with standards: IEC/EN 60947-1, IEC/EN 60947-3,
UL508, UL98, CSA C22.2.
Fourth pole
add on
[A]
[A]
Qty Wt
per
pkg
GOST
IEC rated
operational
current Ie
cULus per UL98 /
CSA C22.2 n°4
UL Listed (File E328470)
IEC conventional free air
thermal
current Ith
AC21A
(≤690V)
cULus per UL508 /
CSA C22.2 n°14
UL Listed (File E93602)
Order code
GAX42 063SA❷ 63
45
1
0.045
GAX41 040A-GAX42 040A
●
––
●
GAX42 063A
63
63
1
0.126
GAX41 063SA-GAX42 063SA
●
––
●
GAX42 080A
80
80
1
0.126
GAX41 125A
––
●
●
GAX42 100A
100
100
1
0.126
GAX42 063A...GAX42 125A
––
●
●
GAX42 125A
125
125
1
0.126
AC22A (≤690V)
AC23A (≤415V)
n°
[kg]
Simultaneous closing operation as switch poles.
GAX42...A
GAX41...A
GAX42 063SA
GAX41 063SA
GAX42 040A❶ 40
40
1
0.045
Type
Early-make closing operation with respect to switch poles.
GAX41 040A❶ 40
40
1
0.046
GAX41 063SA❷ 63
45
1
0.046
GAX41 125A❸ 125
125
1
0.116
❶
❷
❸
Add-on blocks and
accessories
● Certification obtained.
Compliant with standards: IEC/EN 60947-1, IEC/EN 60947-3,
UL508, UL98, CSA C22.2.
For GA016 A-GA040 A only.
For GA063 SA only.
For GA063 A-GA125 A only.
Order code
Characteristics
Qty
per
pkg
Wt
n°
[kg]
Mechanical interlock for line changeover (I-0-II).
GAX50...
20
GAX50 00
For GA016 A-GA040 A,
GA063 SA; ■ 5mm
1
0.050
GAX50 01
For GA063 A-GA125 A;
■ 5mm
1
0.075
For the full range of devices and all technical information please refer to our GENERAL CATALOGUE
Modular contactors
Modular contactors
Order code
Rated
auxiliary
supply voltage
Configura- Qty
tion and n° per
of contacts pkg
[V]❶
NO
NC n°
Wt
[kg]
One or two-pole.
CN20 11 024❷❼ 24VAC/DC
1
1❸ 10
0.135
CN20 11 220❷❼ 220-230VAC❻ 1
1❸ 10
0.135
2
––
10
0.135
CN20 20 220❷❼ 220-230VAC❻ 2
CN20 20 024❷❼ 24VAC/DC
––
10
0.135
Three-pole or four-pole.
CN20...
CN25 10 024❺
24VAC/DC
4❹
––
5
0.260
CN25 10 220❺
220-230VAC❻ 4❹
––
5
0.260
CN25 01 024❺
24VAC/DC
3
1❹ 5
0.260
CN25 01 220❺
220-230VAC❻ 3
1❹ 5
0.260
Three-pole or four-pole.
General characteristics
– DC powered magnetic core system assuring silent
operation and noise damping during the control phase
– Overvoltage protection circuit and voltage peak limitation
of the magnetic core
– Equipped with 2 or 4 closing contacts of equal capacity
permitting use in power or auxiliary circuits
– Operation flag indicator
– Fast mounting.
Operational characteristics
IEC conventional
Type
free-air thermal
current Ith
in AC1
IEC cperating
power
in AC3
230V
Protection
fuse
gG (IEC)
400V
[A]
[kW]
[kW]
[A]
CN20...
20
1.3
––
20
CN25...
25
2.2
4
35
CN40 10 024❺
24VAC/DC
4❹
––
5
0.425
CN40...
40
5.5
11
63
CN40 10 220❺
220-230VAC❻ 4❹
––
5
0.425
CN63...
63
8.5
15
80
CN40 01 024❺
24VAC/DC
3
1❹ 5
0.425
CN40 01 220❺
220-230VAC❻ 3
1❹ 5
0.425
– IEC degree of protection: IP20
– Mounting on 35mm DIN rail (IEC/EN 60175).
Three-pole or four-pole.
CN25...
CN63 10 024
24VAC/DC
4❹
––
5
0.425
CN63 10 220
220-230VAC❻ 4❹
––
5
0.425
CN63 01 024
24VAC/DC
3
1❹ 5
0.425
CN63 01 220
220-230VAC❻ 3
1❹ 5
0.425
❶
❷
❸
❹
❺
❻
❼
Other voltages on request. Consult Customer Service; see contact details on
inside front cover.
2NC version supplied on request.
The last (NC) pole has the same characteristics as the power pole. It can
therefore be used indifferently as an auxiliary or as a NC power contact.
The fourth NO or NC pole has the same characteristics as the power poles;
therefore it can be used indifferently as auxiliary or as power contact.
On request CN25 and CN40 contactors in the following versions can be
supplied: 2NO + 2NC or 4NC power poles. Consult Customer Service; see
contact details on inside front cover.
Can also operate at 220VDC.
No auxiliary contacts can be mounted.
CN40...
When contactors are mounted side by side and operate in
continuous service (≥1 hour), spacing is needed between
equipment to consent appropriate cooling.
9mm spacing is required; there is an accessory, called
half-module spacer, order code CNX 80, for this specific
type of mounting. The following table indicates details of
the space needed between each.
Maximum number of contactors to be mounted
side-by-side without spacing; the CNX 80 spacer is
required when the number of pieces are more than
indicated below:
CN20
CN25
CN40
CN63
Ambient temper.
≤40°C
3
3
3
3
Ambient temper.
>40°...55°C
2
2
3
2
Operational characteristics of contactor-incorporated
auxiliary contacts
Type
IEC insulation IEC rating (AC15 category)
voltage Ui
230V
400V
[A]
[A]
440
6
6
CN25...
440
6
4
CN40...
500
6
4
CN63...
500
6
4
Certifications and compliance
Certifications obtained: GOST.
Compliant with standards: IEC/EN 60947-1,
IEC/EN 60947-4-1, IEC/EN 60947-5-1, IEC/EN 61095.
CN63...
Add-on blocks and
accessories
[V]
CN20...
Order code Characteristics
Max
qty per
contactor
Qty
per
pkg
Wt
n°
n°
[kg]
Auxiliary contacts❶.
CNH 11❶
1NO + 1NC
1
1
0.044
CNH 20❶
2NO
1
1
0.044
1/2 module wide
1
10
0.013
Spacer.
CNX 80
Operational characteristics for auxiliary contacts
– Rated insulation voltage: 440VAC
– IEC conventional free air thermal current Ith: 6A
– Minimum switching capacity: 5mA 12V
– Conductor section: 1...1.5mm2
– Maximum tightening torque: 1Nm.
Certifications and compliance
Certifications obtained: GOST.
Compliant with standards: IEC/EN 60947-1,
IEC/EN 60947-4-1, IEC/EN 60947-5-1, IEC/EN 61095.
❶ Not suitable for CN20 modular contactors.
CNH...
For the full range of devices and all technical information please refer to our GENERAL CATALOGUE
21
Time relays
On delay time relay.
Multiscale. Multivoltage
Order code
Time of
scale
range
Rated
Qty
auxiliary
per
supply voltage pkg
Wt
TM P
0.1-1s
24-48VDC
1-10s
24-240VAC
6-60s
1-10min
6min-1h
1-10h
0.1-1 day
1-10 days
ON only
OFF only
[V]
n°
[kg]
1
0.048
Certifications and compliance
Certifications obtained: UL Listed, for USA and Canada
(File E93601) as Auxiliary Devices - Timers; GOST.
Compliant with standards: IEC/EN 61812-1, UL508, CSA
C22.2 n° 14.
TM P
Multifunction time relay.
Multiscale. Multivoltage.
1 relay output
Order code
Time of
scale
range
TM M1
0.1-1s
12-240V
1-10s
AC/DC
6-60s
1-10min
6min-1h
1-10h
0.1-1 day
1-10 days
ON only
OFF only
Rated
Qty
auxiliary
per
supply voltage pkg
Wt
[V]
n°
[kg]
1
0.086
Order code
Time of
scale
range
TM LS
0.5-20min 220-240VAC
TM M1
Staircase time relay
TM LS
General characteristics
– Electronic time relay, multiscale, multivoltage.
On delay, delay on make, with start at relay energising
– 1 relay output with 1 changeover contact (SPDT)
– Delay time adjustable on front by rotary switch: 10-100%
– Green LED indicator for power on
– Red LED indicator for relay state; flashing for delay
and steady when relay energised
– Modular DIN 43880 housing, 1 module
– IEC degree of protection: IP40 on front (only when
mounted in housing or electric board with IP40);
IP20 on terminals.
Rated
Qty
auxiliary
per
supply voltage pkg
Wt
[V]
n°
[kg]
1
0.080
General characteristics
– Electronic time relay, multifunction, multiscale, multivoltage
– Enabling input
– 1 relay output with 1 changeover contact (SPDT)
– Selectable functions: (a) On delay; delay on make with
start at relay energising. (b) Pulse on relay energising
with start when energised. (c) Flasher starting with OFF
interval. Equal timing recycle. (d) Flasher starting with
ON interval. Equal timing recycle. (e) Off delay; relay
energising at external contact closing with start on break.
(f) Pulse on relay energising with start on external
contact closing. (g) Pulse on relay energising with start
on external contact opening. (h) On-off delay. Delay on
make, with start at external contact closing, and delay at
break, with start at external contact opening. (i) Internal
ON/OFF trigger with relay contact closing or operating at
each closing of an external contact. (j) Pulse generator,
unequal timing recycle; starting with OFF pulse time and
0.5s ON pulse.
– Delay time adjustable on front by rotary switch: 10-100%
– Green LED indicator for power on
– Red LED indicator for relay state; flashing for delay and
steady when relay energised
– Modular DIN 43880 housing, 1 module suitable for
fixing on 35mm DIN rail (IEC/EN 60715)
– IEC degree of protection: IP40 on front (only when
mounted in housing or electric board with IP40);
IP20 on terminals.
Certifications and compliance
Certifications obtained: GOST; UL Listed, for USA and
Canada (cULus - File E93601) as Auxiliary Devices Tmers.
Compliant with standards: IEC/EN 61812-1, UL508,
CSA C22.2 n° 14.
General characteristics
– Electronic time relay single scale and voltage for
staircase illumination
– 1 relay output with 1 powered normally open
(N/O-SPST) contact
– Delay time adjustable on front by rotary switch
– Suitable for 3 or 4-wire systems
– 1 slide switch for timed or constant lighting operation
– Function for one hour lighting and fast switch off
– Green LED indicator for power on
– Connection with up to 50 light-up switches maximum;
≤ 1mA each
– Modular DIN 43880 housing, 1 module suitable for
fixing on 35mm DIN rail (IEC/EN 60715)
– IEC degree of protection: IP40 on front (only when
mounted in housing or electric board with IP40);
IP20 on terminals.
Certifications and compliance
Certifications obtained: UL Listed, for USA and Canada
(cULus - File E93601) as Auxiliary Devices - Timers;
GOST.
Compliant with standards: IEC/EN 61812-1, UL508,
CSA C22.2 n° 14.
22
For the full range of devices and all technical information please refer to our GENERAL CATALOGUE
Protection relays
Voltage monitoring relay
for three-phase systems
with or without neutral
Order code
Rated voltage
to control Ue
(phase to phase)
Qty
per
pkg
Wt
[V] 50/60Hz
n°
[kg]
Three-phase system, with or without neutral.
Minimum and maximum AC voltage. Delayed trip.
Phase loss, neutral loss and incorrect phase sequence.
Instantaneous trip.
PMV50N A240
208-240VAC
1
0.150
PMV50N A440
380-440VAC
1
0.150
PMV50N...
General characteristics
– Voltage monitoring relay, self powered, for minimum
and maximum voltage, phase loss, neutral loss and
incorrect phase sequence
– 4 configurable rated voltage (Ue):
• PMV50N A240: 208-220-230-240VAC (phase-phase)
120-127-132-138VAC (phase-neutral)
• PMV50N A440: 380-400-415-440VAC (phase-phase)
220-230-240-254VAC (phase-neutral)
– Excellent tripping accuracy
– TRMS measurements (True Root Mean Square)
– Phase loss detection when one of the voltages is
<70% rated voltage
– Phase or neutral loss tripping time: 60ms
– 2 relay outputs, each with 1 changeover contact (SPDT)
– Modular DIN 43880 housing, 3-module
– IEC protection degree: IP40 on front (only when
placed in IP40 enclosure or control board); IP20 at
terminals.
ADJUSTMENTS
“V max”
Maximum voltage tripping threshold
105-115% Ue
“V min”
Minimum voltage tripping threshold
80-95% Ue
“Delay” for each Tripping time 0.1-20s
“Reset Delay” Resetting time 0.1-20s.
Reference standards
Compliant with standards: IEC/EN 60255-5,
IEC/EN 61000-6-2, IEC/EN 61000-6-3, UL 508,
CSA C22.2 n° 14.
Current monitoring
relay
Order code
Rated
current
Ie
Auxiliary
supply
voltage
Qty
per
pkg
Wt
[A]
[V]
n°
[kg]
Single-phase system.
AC/DC minimum or maximum current control. Delayed trip.
Auxiliary AC/DC power supply.
Automatic or manual reset.
PMA30 240
PMA30 240
5 or 16A
24-240V
AC/DC
1
0.121
General characteristics
– Current monitoring relay for AC/DC minimum or
maximum current control; AC/DC multivoltage
auxiliary power supply
– Direct connection up to 16A max, or by current
transformer (CT)
– Excellent tripping accuracy
– TRMS current measurements (True Root Mean Square)
– Resetting and inhibition input
– 1 relay output with 1 changeover contact (SPDT)
– Modular DIN 43880 housing, 2-module
– IEC protection degree: IP40 on front (only when
placed in IP40 enclosure or control board); IP20 at
terminals.
ADJUSTMENTS
"Set point"
Minimum or maximum current tripping
threshold 5-100% Ie
"Hysteresis"
Minimum or maximum hysteresis
threshold 1-50%
"Trip delay"
Tripping time 0.1-30s
"Inhibition time" Tripping delay for external input or at
power up 1-60s
“Ie”
Current scale selection: 5A or 16A
“Mode”
• Min or max function
• Relay output normally energised or
de-energised
• Tripping memory (Latch) On or Off.
Certifications and compliance
Certifications obtained: UL Listed, for USA and
Canada (cULus - File E93601), as Auxiliary Devices Modular ampere monitoring relays; GOST.
Compliant with standards: IEC/EN 60255-5,
IEC/EN 61000-6-2, IEC/EN 61000-6-3, UL 508,
CSA C22.2 n° 14.
For the full range of devices and all technical information please refer to our GENERAL CATALOGUE
23
Switching power supplies
Micro PLCs
Switching power supplies
Order code
Rated
output
voltage
Rated
output
current
Output
power
Qty
per
pkg
Wt
[V]
[A]
[W]
n°
[kg]
Single phase.
PSL1M 010...
PSL1M 010 12 12VDC
0.83
10
1
0.114
PSL1M 024 12
2
24
1
0.177
PSL1M 033 12
2.75
33
1
0.248
PSL1M 054 12
4.5
54
1
0.311
PSL1M 072 12
6
72
1
0.443
PSL1M 010 24 24VDC
0.42
10
1
0.114
PSL1M 024 24
1
24
1
0.177
PSL1M 036 24
1.5
36
1
0.248
PSL1M 060 24
2.5
60
1
0.311
PSL1M 100 24
4.2
100
1
0.443
PSL1M 033 12
PSL1M 036 24
General characteristics
Switching power supplies transform an AC input voltage
into a DC output one. This type of equipment is used in
industrial and domestic automation fields. The power
supplies are equipped with switching technology offering
very high efficiency in an extremely compact size.
Dimensions are compatible with modular consumer panels
and its plastic housing is suitable for building automation
installations as well as industrial automation applications.
The wide range of power supply voltages and the choice of
DC current outputs provide for the best adaptability to
supply voltage needs of the most common electronic and
electromechanical devices.
Protections: short circuit, overload and input voltage peaks.
Indications:
– LED indicator for low voltage conditions
– LED indicator for power on.
Operational characteristics
– Rated supply voltage: 100-240VAC
– Mains frequency: 50/60Hz
– Output voltage adjustment by front potentiometer
– High efficiency up to 89%
– Screw connection terminals
– Modular DIN 43880 housing; number of modules:
• 1 for PSL1M 010...
• 2 for PSL1M 024...
• 3 for PSL1M 033 12 and PSL1M 036 24
• 4 for PSL1M 054 12 and PSL1M 060 24
• 5 for PSL1M 072 12 and PSL1M 100 24
– IEC degree of protection: IP20 on terminals.
Certifications and compliance
Certifications obtained: UL Listed for USA and Canada
(cULus - File E318016) as Power Supplies in power circuit
and motor-mounted apparatus category; GOST.
Compliant with standards: IEC/EN 60950-1,
IEC/EN 61000-6-2, IEC/EN 61000-6-3, UL508,
CSA C22.2 n° 14.
Micro PLCs
Order
code
Auxiliary
supply
voltage
In/Out❶
Qty
per
pkg
Wt
n°
[kg]
Base modules.
LRD10...
LRD12...
Expansion and
communication modules
LRD12R D024 24VDC
8/4 relay
1
0.241
LRD20R D024 24VDC
12/8 relay
1
0.360
LRD10R A240 100-240VAC 6/4 relay
1
0.242
LRD20R A240 100-240VAC 12/8 relay
1
0.367
Qty
per
pkg
Wt
n°
[kg]
❶
Inputs/Outputs.
Order
code
Auxiliary
supply
voltage
In/Out❶
Expansion and communication modules❷.
LRE...
Accessories
LRE04A D024
24VDC
4 analog outputs 1
0...10V/0...20mA
0.160
LRE04P D024
24VDC
4 PT100 temp. 1
sensor inputs
0.160
LRE P00
Modbus®-RTU protocol
communication unit
❶
❷
1
0.134
Inputs/Outputs.
The expansion modules are supplied with connector for base module.
Order
code
Description
Qty
per
pkg
Wt
n°
[kg]
General characteristics
FUNCTIONS
– Addition-Subtraction on variables
– Multiplication-Division on variables
– Comparator on variables
– HMI display for parameter viewing and programming
– PWM output
– High speed input (1kHz)
– PID function
– Multiplexer
– Analog ramp
– Register transfer (numerical variables and status)
– Shift function
– Boolean logic blocks.
Operational characteristics
– 8A Ith current relay outputs for AC and DC versions
– 0.3A 24VDC transistor outputs for DC version
– 0-10V analog inputs for DC version
– Version: modular for mounting on 35mm DIN rail
(IEC/EN 60715) or M4x15mm screw fixing
– Type of terminal: Screw
– IEC degree of protection: IP20.
Certifications and compliance
Certifications obtained: UL Listed, for USA and Canada
(cULus - File E300049), as Programmable Controllers.
Compliant with standards: IEC/EN 61131-2, UL508, CSA
C22.2 n°142.
Accessories.
24
LRX C00
PC (RS232)-LRD
connecting cable, 1.5m
1
0.083
LRX C03
PC (USB)-LRD
connecting cable, 1.5m
1
0.083
LRX SW
Programming and
supervision software
(CD-ROM)
1
0.057
For the full range of devices and all technical information please refer to our GENERAL CATALOGUE
Rotary cam switches
Modular service cover
35mm DIN rail mount.
Order
code
Rated
current
AC1
Front
plate
size
Qty
per
pkg
Weight
[A]
[mm] n°
[kg]
45x54 1
0.110
45x54 1
0.110
ON/OFF SWITCHES.
One-pole – 3 wafers – scheme 90.
GX16 90 O48
0
1
16
Two-pole – 3 wafers – scheme 91.
GX16 91 O48
0
1
16
Three-pole – 3 wafers – scheme 10.
GX16 10 O48
0
1
16
45x54 1
0.118
Four-pole – 3 wafers – scheme 92.
GX16 92 O48
0
1
16
45x54 1
0.125
45x54 1
0.098
45x54 1
0.122
45x54 1
0.150
45x54 1
0.170
General characteristics
– IEC 16A conventional free air thermal current Ith
ratings
– Extended mechanical and electrical life
– Rotation angles: 30°, 45°, 60° and 90°
– Silver-alloy dual-breaking contacts
– Direct opening action ; safety function according to
IEC/EN 60947-5-1
– IEC IP40 front degree of protection; IEC IP20 degree
of protection of contacts
– Suitable for screw fixing or mounting on 35mm DIN
rail (IEC/EN 60175)
– Legend marking is standard supplied as illustrated in
the order code table; any other on request.
Special versions
In addition to standard types, particular versions are
available with special operating circuit schemes.
Certifications and compliance
Certifications obtained: UL Listed, for USA and Canada
(cULus - File E155982) as Manual Motor Controllers;
GOST.
Compliant with standards: IEC/EN 60947-1,
IEC/EN 60947-3, IEC/EN 60947-5-1, IEC/EN 61058-1,
UL508, CSA C22.2 n° 14.
CHANGEOVER SWITCHES WITH 0.
One-pole – 3 wafers – scheme 51.
GX16 51 O48
1
0
16
2
Two-pole – 3 wafers – scheme 52.
GX16 52 O48
1
0
16
2
Three-pole – 3 wafers – scheme 53.
GX16 53 O48
1
0
16
2
Four-pole – 4 wafers – scheme 75.
GX16 75 O48
1
0
16
2
VOLTMETER SWITCHES.
Phase-Neutral L1-N/L2-N/L3-N – 3 wafers – scheme 68.
GX16 68 O48
0
L1N
16
45x54 1
0.130
L2N
L3N
Phase-Phase L1-L2/L2-L3/L3-L1 – 3 wafers – scheme 67.
GX16 67 O48
0
L1-L2
16
45x54 1
0.130
L2-L3
L3-L1
For 3 phase to phase voltage and 3 phase voltage readings
3 wafers – scheme 66
GX16 66 O48
L1-L2
0
L2-L3
L1-N
16
45x54 1
0.156
L2-N
L3-N
L3-L1
AMMETER SWITCHES.
Direct L1-L2-L3 current readings – 5 wafers – scheme 97.
GX16 97 O48
16
0
L3
45x54 1
0.196
L1
L2
For L1-L2-L3 readings via 3 CTs – 4 wafers – scheme 98.
GX16 98 O48
16
0
L3
45x54 1
0.150
L1
L2
For the full range of devices and all technical information please refer to our GENERAL CATALOGUE
25
Energy meters
Single phase,
non expandable
MID
DME D110 T1...
MID
DME D120 T1...
Order code
Description
Qty
per
pkg
Wt
DME D100 T1
40A direct connection,
1 pulse output,
220-240VAC
n°
[kg]
1
0.086
DME D100 T1 MID 40A direct connection,
1 pulse output,
230VAC, MID certified
1
0.086
40A direct connection,
1
1 programmable static output,
multi-measurements ❶,
220-240VAC
0.090
DME D110 T1 MID 40A direct connection,
1
1 programmable static output,
multi-measerements ❶,
230VAC, MID certified
0.090
DME D120 T1
63A direct connection,
1
1 programmable static output,
multi-measurements ❶,
220-240VAC
0.148
DME D120 T1 MID 63A direct connection,
1
1 programmable static output,
multi-measerements ❶,
230VAC, MID certified
0.148
DME D110 T1
❶ Multi-measurements:
- Total active energy
- Partial active energy
- Total reactive energy
- Partial reactive energy
- Voltage
- Current
- Active power
- Reactive power
- Power factor
- Frequency
- Total hour counter
- Partial hour counter
- Average active power (calculation on every last 15 minutes)
- Maximum demand.
General characteristics
These energy meters are instruments for energy
consumption measurement in single-phase systems with
direct connection.
Operational characteristics
– Rated supply voltage: 220-240VAC
– Voltage range: 187-264VAC 50/60Hz
– Direct connection
– 40A max. current
(DME D100 T1... and DME D110 T1...)
– 63A max. current (DME D120 T1...)
– Active and reactive energy measurement
(DME D120 T1...)
– Partial energy measurements are clearable
(DME D120 T1...)
– Active energy accuracy: Class 1 (IEC/EN 62053-21) for
DME D T1 and DME D120 T1 types only; Class B for
MID types
– Reactive energy accuracy: Class 2 (IEC/EN 62053-23)
for DME D110 T1 and DME D120 T1 types only
– LCD meter with 5+1 digit count
(DME D100 T1... and DME D110 T1...)
– LCD meter with 6+1 digit count (DME D120 T1...)
– Metrological LED with pulse emission for
consumption indication
– Static pulse output which is programmable for
DME D110 T1... and DME D120 T1...
– Modular DIN 43880 housing, 1-module
(DME D100 T1... and DME D110 T1...)
– Modular DIN 43880 housing, 2-module
(DME D120 T1...)
– Sealable terminals blocks, standard supplied
– IEC/UL/CSA protection degree: IP40 on front (for MID
types, placed in IP51 enclosure or control board);
IP20 at terminals.
Operational characteristics only for MID type
– Rated supply voltage: 230VAC
– Voltage range: 187-265VAC 50Hz
– Measurement of 14 electrical parameters for
DME D110 T1 and DME D110 T1 MID only
– Active energy measurement accuracy: Class B
(EN 50470-3)
– Reactive energy measurement accuracy: Class 2
(IEC/EN 62053-23) for DME D110 T1 MID and
DME D120 T1 MID only
Certifications and compliance
Certifications obtained: UL Listed, for USA and Canada
(cULus - File E346886), as Electrical Process Control
Equipment - Energy meters.
Certifications obtained for MID type: MID Class B,
certifications per module B (type tests) and per module D
(production conformity).
Compliant with standards: EN 50470-1,
IEC/EN 61010-1, UL 61010-1, CSA C22.2 n°61010-1.
Compliant with standards for MID type: EN 50470-1,
EN 50470-3.
26
For the full range of devices and all technical information please refer to our GENERAL CATALOGUE
Energy meters
Three phase with neutral,
non expandable
MID
Order code
Description
DME D300 T2
63A direct connection,
2 programmable static
outputs,
multi-measurements ❶
DME D300 T2 MID 63A direct connection,
2 programmable static
outputs, multi-measur. ❶,
MID certified
❶ Multi-measurements:
-
DME D300 T2...
Three phase with or without
neutral, expandable
MID
DME D310 T2...
Wt
n°
[kg]
1
0.360
1
0.360
-
Power factor
Frequency
Total hour counter
Partial hour counter
Average active power (calculation
on every last 15 minutes)
- Maximum demand.
Order code
Description
DME D310 T2
Connection with CT /5A
1
secondary, 2 programmable
static outputs,
multi-measurements ❶,
expandable
0.332
DME D310 T2 MID Connection with CT /5A
1
secondary, 2 programmable
static outputs,
multi-measurements ❶,
expandable, MID certified
0.332
❶ Multi-measurements:
-
Data concentrator,
expandable
Total active energy
Partial active energy
Total reactive energy
Partial reactive energy
Voltage
Current
Active power
Reactive power
Qty
per
pkg
Total active energy
Partial active energy
Total reactive energy
Partial reactive energy
Voltage
Current
Active power
Reactive power
Order code
Qty
per
pkg
Wt
n°
[kg]
-
Power factor
Frequency
Total hour counter
Partial hour counter
Average active power (calculation
on every last 15 minutes)
- Maximum demand.
Description
Qty
per
pkg
Wt
n°
[kg]
Data concentrator.
DME CD
For DME M100 T1 and
1
DME D... types, 8 energy
meters can be connected,
RS485 interface, expandable
0.337
DME CD
Expansion modules
Order
code
Description
Inputs and outputs.
EXM10 00
2 digital inputs and 2 static outputs, opto-isolated
Communication ports.
EXM10 12
Opto-isolated RS485 interface
EXM10 13
Ethernet interface with Web server function
Maximum combination
EXM 10 10
General characteristics
The energy meters are digital meters/analyzers of electric
energy for systems with direct three-phase connection or
by CT. Expandable up to 3 EXM10 series interfaced by
infrared beam.
Operational characteristics
– Rated supply voltage:
230VAC (L-N); 400VAC (L-L) MID types;
220-240VAC (L-N); 380-425VAC (L-L) for DME
D300/D310 T2
– Voltage range:
187-264VAC (L-N); 323-456VAC (L-L) - 50/60Hz
– Direct connection up to 63A for DME D300 T2... only
– Connection by CT /5A for DME D310 T2... only
– Active energy accuracy: Class 1 (IEC/EN 62053-21) for
DME D300/D310 T2; Class B (EN 50470-3) for MID
types
– Reactive energy accuracy: Class 2 (IEC/EN 62053-23)
– LCD multifunction meter
– Metrological LED with pulse emission for consumption
indication
– Partial active energy measurement is clearable
– 1 programmable digital input
– 2 programmable static outputs
– Optical interface port for EXM10... expansion modules
with DME 310 T2... only
– Modular DIN 43880 housing, 4-module
– Sealable terminalsblocks, standard supplied
– IEC protection degree: IP40 on front (for MID types,
placed IP51 enclosure or control board); IP20 at
terminals.
Operational characteristics only for MID type
– Rated supply voltage: 230VAC (L-N); 400VAC (L-L)
– Voltage range:
187-264VAC (L-N); 323-456VAC (L-L) - 50Hz
– Active energy accuracy: Class B (EN 50470-3)
– Reactive energy accuracy: Class 2 (IEC/EN 62053-23)
Certifications and compliance
Certifications obtained: MID Class B, certifications per
module B (type tests) and per module D (production
conformity).
Compliant with standards: EN 50470-1, EN 50470-3.
Compliant with standards MID type: EN 53470-1,
IEC/EN 61010-1.
General characteristics
The data concentrator DME CD has been designed in
combination with energy meters DME D...
It is capable of pulse counting coming in from the static
outputs of the connected energy meters, storing data and
viewing it on the display or directly on a PC through the builtin RS485 port, using the DMK SW software.
Expandable with up to 3 EXM10 series interfaced by infrared
beam.
Operational characteristics
– Rated supply voltage: 100-240VAC/110-250VDC
– Voltage range: 85-264VAC 50/50Hz/93.5-300VDC
– Backlight graphic LCD
– 8 inputs, expandable with EMX10... modules up to 14
– Built-in RS485 communication interface
– Modbus®-RTU ASCII and TCP communication protocol
– Multifunction display
– Total and partial energy meter, can be cleared for each
channel
– Programmable general counters
– Calculation of derivative average values
– Mathematical operations among meters
– IEC protection degree: IP40 on front; IP20 at terminals.
Certifications and compliance
Certifications obtained: UL Listed, for USA and Canada (File
E346886), as Electrical Process Control Equipment - Data
concentrator.
Compliant with standards: IEC/EN 61010-1,
IEC/EN 61000-6-2, IEC/EN 61000-6-3, UL 61010-1,
CSA C22.2 n°61010-1.
For the full range of devices and all technical information please refer to our GENERAL CATALOGUE
27
Measuring devices
LED instruments
single phase
Order
code
Displayed
measurements
Relay Qty
output per
pkg
Wt
n°
n°
n°
[kg]
1 voltage value
1 max voltage value
1 min voltage value
1
1
0.268
1 current value
1 max current value
1 min current value
1
1
0.268
1 frequency value
1
1 max frequency value
1 min frequency value
1
0.268
1 cosphi value
1 power factor value
1
Voltmeter.
DMK 80 R1❶
Ammeter.
DMK 81 R1❶
DMK 80 R1
DMK 81 R1
Frequency meter.
DMK 83 R1❶
Cosphi meter.
DMK 84 R1❶
❶
DMK 83 R1
DMK 84 R1
1
Relay output with control and protection functions.
0.272
General characteristics
The DMK 8... instruments are available with modular
housing, 3-module size.
Measurements are True RMS values and provide for
reliable operation even in presence of harmonics.
Operational characteristics
– Auxiliary supply voltage: 220-240VAC
– Operating frequency: 50-60Hz
– True RMS measurements
– HIGH and LOW measurement storage
– 1 relay output with 1 changeover contact for DMK...R1
version only
– Terminals: 4mm2
– Modular DIN 43880 housing, 3 modules
– Degree of protection: IP40 on front; IP20 on terminals.
DMK 80 R1
– Voltage measurement range: 15-660VAC
– Operating frequency range: 45-65Hz
– Programmable VT ratio: 1.00-500.00
– Accuracy: ±0.25% f.s. ±1 digit
DMK 81 R1
– Current measurement range: 0.05-5.75A
– Operating frequency range: 45-65Hz
– Programmable CT ratio: 5-10,000
– Accuracy: ±0.5% f.s. ±1 digit
DMK 83 R1
– Measurement input: 15-660VAC
– Frequency measurement range: 50-60Hz ±10%
– Measurement accuracy: ±1 digit
– Accuracy: 1° ±1 digit
DMK 84 R1
– Cosphi measurement error: ±0.5° ±1 digit
– Cosphi measurement in 4 quadrants
– Accuracy: ±1° digit
Control and protection functions
DMK 80 R1
– Voltage loss or failure: OFF/5-85%
– Maximum voltage: OFF/102-120%
– Minimum voltage: OFF/70-98%
– Time delay for max-min voltage or voltage loss, phase
loss ❷: 0.0-900.0 seconds.
DMK 81 R1
– Current loss: OFF/2-100%
– Maximum current: OFF/102-200%
– Maximum current instantaneous tripping:
OFF/110-600%
– Minimum current: OFF/5-98%
– Time delay for max-min current or current loss ❷:
0.0-900.0 seconds.
DMK 83 R1
– Maximum frequency: OFF/101-110%
– Minimum frequency: OFF/90-99%
– Time delay for min-max frequency ❷:
0.5-900.0 seconds.
DMK 84 R1
– Minimum-maximum cos thresholds in 4 quadrants
– Minimum-maximum PF thresholds in 4 quadrants
– Delay time for max or min threshold ❷:
1-9,000 seconds.
Reference standards
Compliant with standards: IEC/EN 61010-1,
IEC/EN 61000-6-2, IEC/EN 61000-6-3.
❷ Independent adjustable delays.
28
For the full range of devices and all technical information please refer to our GENERAL CATALOGUE
Measuring devices
LED instruments
three phase
Order
code
Displayed
measurements
Relay Qty
output per
pkg
Wt
n°
n°
n°
[kg]
3 phase voltage values 1
3 phase to phase
voltage values
3 max phase voltage
values
3 max phase to phase
voltage values
3 min phase voltage
values
3 min phase to phase
voltage values
1
0.264
3 phase current values 1
3 max phase current
values
3 min phase current
values
1
Voltmeter.
DMK 70 R1❷
DMK 70 R1
Ammeter.
DMK 71 R1❷
0.272
DMK 71 R1
DMK 75 R1
3 phase voltage values 1
3 phase to phase
voltage values
3 phase current values
4 active power values,
phase and total
3 maximum phase
voltage values
3 maximum phase to
phase voltage values
3 maximum phase
current values
4 max active power,
phase and total
3 minimum phase
voltage values
3 minimum phase to
phase voltage values
3 minimum phase
current values
4 min active power,
phase and total
❶ Connection also to single phase.
❷ Relay output with control and protection functions.
Operational characteristics
– Auxiliary supply voltage: 220-240VAC
– Operating frequency: 50-60Hz
– True RMS measurements
– HIGH and LOW measurement storage
– 1 relay output with 1 changeover contact for DMK...R1
version only
– Terminals: 4mm2
– Modular DIN 43880 housing, 3-module
– Degree of protection: IP40 on front; IP20 on terminals.
DMK 70 R1
– Voltage measurement range: 15-660VAC
– Operating frequency range: 45-65Hz
– Programmable VT ratio: 1.00-500.00
– Accuracy: ±0.25% f.s. ±1 digit
DMK 71 R1
– Current measurement range: 0.05-5.75A
– Operating frequency range: 45-65Hz
– Programmable CT ratio: 5-10,000
– Accuracy: ±0.5% f.s. ±1 digit
Combined voltmeter, ammeter and wattmeter.
DMK 75 R1❶❷
General characteristics
The DMK 7... instruments are available with modular
housing, 3-module size.
Measurements are True RMS values and provide for
reliable operation even in presence of harmonics.
1
0.280
DMK 75 R1
– Voltage measurement range: 35-660VAC
– Current measurement range: 0.05-5.75A
– Frequency measure range: 45-65Hz
– Programmable VT ratio: 1.00-500.00
– Programmable CT ratio: 5-10,000
– Accuracy: Voltage ±0.25% f.s. ±1 digit
Current ±0.5% f.s. ±1 digit
Control and protection functions
DMK 70 R1
– Phase loss or failure: OFF/5-85%
– Maximum voltage: OFF/102-120%
– Minimum voltage: OFF/70-98%
– Asymmetry: OFF/2-20%
– Phase sequence: OFF/L1-L2-L3/L3-L2-L1
– Maximum frequency: OFF/101-110%
– Minimum frequency: OFF/90-99%
– Time delay for max-min voltage, phase loss,
asymmetry and min-max frequency ❸:
0.0-900.0 seconds.
DMK 71 R1
– Current loss: OFF/2-100%
– Maximum current: OFF/102-200%
– Maximum current instantaneous tripping:
OFF/110-600%
– Minimum current: OFF/5-98%
– Asymmetry: OFF/2-20%
– Time delay for max-min current or current loss and
asymmetry ❸: 0.0-900.0 seconds.
DMK 75 R1
Voltage
– Phase loss or failure: OFF/5-85%
– Maximum voltage: OFF/102-120%
– Minimum voltage: OFF/70-98%
– Asymmetry: OFF/2-20%
– Phase sequence: OFF/L1-L2-L3/L3-L2-L1
Current
– Current loss: OFF/2-100%
– Maximum current: OFF/102-200%
– Maximum current instantaneous tripping:
OFF/110-600%
– Minimum current: OFF/5-98%
– Asymmetry: OFF/2-20%
Power
– Rated power: 1-10,000
– Maximum power: OFF/101-200%
– Maximum power instantaneous tripping:
OFF/110-600%
– Minimum power: OFF/10-99%
Frequency
– Maximum frequency: OFF/101-110%
– Minimum frequency: OFF/90-99%
– Time delay for max-min voltage, max-min current or
current loss, phase loss, asymmetry and min-max
power ❸: 0.0-900.0 seconds.
Reference standards
Compliant with standards: IEC/EN 61010-1,
IEC/EN 61000-6-2, IEC/EN 61000-6-3.
❸ Independent adjustable delays.
For the full range of devices and all technical information please refer to our GENERAL CATALOGUE
29
Power analyzers
LCD multimeters
non expandable
Order
code
Description
Wt
n°
[kg]
DMG 200
Graphic 128x80 pixel LCD,
auxiliary supply
100-240VAC/110-250VDC.
Multilanguage: Italian,
English, French, Spanish
and Portuguese
1
0.294
DMG 210
Graphic 128x80 pixel LCD,
RS485 port included,
auxiliary supply
100-240VAC/110-250VDC.
Multilanguage: Italian,
English, French, Spanish
and Portuguese
1
0.300
Qty
per
pkg
Wt
n°
[kg]
1
0.320
DMG 200 - DMG 210
LCD multimeters
expandable
Qty
per
pkg
Order
code
Description
DMG 300
Graphic 128x80 pixel LCD,
harmonic analysis,
auxiliary supply
100-240VAC/110-250VDC.
Multilanguage: Italian,
English, French, Spanish
and Portuguese
DMG 300
Expansion modules for
DMG 300
Order
code
Description
Inputs and outputs.
EXM10 00
2 digital inputs and 2 static outputs, opto-isolated
Communication ports.
EXM10 12
Opto-isolated RS485 interface
EXM10 13
Ethernet interface with Web server function
EXM10 30
Data storage, clock-calendar (RTC) with reserve
charge for data logging
Maximum combination
EXM 10 10
General characteristics
DMG 200... , DMG 210 and DMG 300analyzers are available
with a modular housing, 4-module size, and are equipped with
a graphic backlit LCD capable of providing extremely clear,
intuitive and flexible viewing of all electrical parameters of a
system. The very accurate measurements combined with their
extreme compactness provide an ideal solution for every type
of application.
The DMG 210 version is supplied with RS485 opto-isolated
built-in interface.
Expandable with up to 3 EXM10 series interfaced by infrared
beam.
Main measurements and functions include:
– Voltage: phase, line and system values
– Current: phase values (neutral current calculated)
– Power: apparent, active and reactive phase and total values
– P.F.: Power Factor per phase and total
– Frequency of measured voltage value
– HIGH-LOW-AVERAGE value functions of all measurements
– Maximum demand of power and current values
– Total harmonic distortion (THD) of voltage and current
values
– Harmonic analysis of voltage and current up to 31° order
(DMG 300 only)
– Energy meters for active, reactive and apparent values
– Hour counter for programmable total and partial hours
– Energy meters for active, reactive, apparent partial and total
values, programmable tariff functions (DMG 300 only)
– Pulse counter for general use: pulse counting for water,
gas, etc. consumption with expansion module only
(DMG 300 only).
Operational characteristics
– Auxiliary supply voltage range:
85-264VAC / 93.5-300VDC
– Voltage measurement range:
20-830VAC phase-to-phase
10-480VAC phase-neutral
– Usage in medium and high-voltage systems with voltage
transformers
– Rated input current: with external CT /5A
– Rated input current: with external CT, 5A or 1A
(DMG 300 only)
– Current measurement range with CT up to 10,000A
– Frequency measurement range: 45-66Hz
– True RMS measurements for voltage and current values
– Accuracy (for DMG 200 and DMG 210):
• Voltage: ±0.5% (50-830VAC)
• Current: ±0.5% (0.1-1.1 In)
• Power: ±1% f.s.
• Frequency: 0.05%
• Active energy: Class 1 (IEC/EN 62053-21)
• Reactive energy: Class 2 (IEC/EN 62053-23)
– Accuracy (for DMG 300):
• Voltage: ±0.2% (50-830VAC)
• Current: ±0.2% (0.1-1.1 In)
• Power: ±0.5% f.s.
• Power factor: ±0.5%
• Frequency: 0.05%
• Active energy: Class 0.5S (IEC/EN 62053-22)
• Reactive energy: Class 2 (IEC/EN 62053-23)
– Non-volatile memory for data storage
– Communication protocol Modbus®-RTU, ASCII and TCP for
DMG 210 and DMG 300 only
– Programming and remote control by software for
DMG 210 only; only with communication expansion
modules for DMG 300 only
– Modular DIN 43880 housing, 4-module
– IEC protection degree: IP40 on front; IP20 at terminals.
Certifications and compliance
Certifications obtained: UL Listed, for USA and Canada (File
E93601), as Auxiliary Devices - Multimeter; GOST.
Compliant with standards: IEC/EN 61010-1,
IEC/EN 61000-6-2, IEC/EN 61000-6-3, UL 508,
CSA C22.2 n° 14.
Contact our Customer Service (Tel. +39 035 4282422; email: [email protected]) for setup and supervision software.
30
For the full range of devices and all technical information please refer to our GENERAL CATALOGUE
Current transformers
Solid-core
Order
code
Primary
current
Ip
Burden
cl. 0.5 cl. 1
Qty Weight
per
pkg
/5 [A]
[VA]
[VA]
n°
DM1T 0050
50
—
1.5
1
0.200
DM1T 0060
60
—
2
1
0.200
DM1T 0080
80
—
2.5
1
0.200
DM1T 0100
100
—
2.5
1
0.200
DM1T 0150
150
—
2.5
1
0.200
[kg]
For Ø22mm cable.
DM1T...
DM2T...
General characteristics
The DM... series current transformers (CT) are installed
in electric systems to reduce the line current to a
secondary value of 5A, which is compatible with current
inputs of digital multimeters or protection relays.
These are without primary winding and are used for high
primary current values from 50A upward.
The number of loops of the primary cable does not
modify the accuracy but converts the primary current
value proportional to secondary current.
For Ø23mm cable.
For 30x10mm, 25x12.5mm, 20x15mm busbars.
DM2T 0060
60
—
1
1
0.130
DM2T 0080
80
—
1
1
0.130
DM2T 0100
100
—
1.5
1
0.130
DM2T 0150
150
—
1.5
1
0.130
DM2T 0200
200
—
2.5
1
0.130
DM2T 0250
250
—
2.5
1
0.130
DM2T 0300
300
1.5
3
1
0.130
DM2T 0400
400
2
3
1
0.130
300/5A
S2
L
S1
K
n°=1
300 / 5A
1 loop = 300 / 5A
9
J-2 K
P1
300:n/5A
300:1/5A=300/5A
300/5A
S2
L
S1
K
n°=2
300 / 5A
2 loops = 150 / 5A
9
J-2 K
P1
300:n/5A
300:2/5A=150/5A
300/5A
S2
L
S1
K
9
J-2 K
P1
n°=3
300 / 5A
3 loops = 100 / 5A
300:n/5A
300:3/5A=100/5A
Operational characteristics
– Operating frequency: 50-60Hz
– Secondary output current: 5A
– Overload withstand: 120% Ip
– IEC rated insulation voltage Ui: 720V
– IEC rated short-time thermal current Ith:
40-60 Ipn for 1 second
– IEC rated dynamic current Idyn: 2.5 Ith for 1 second
– Insulation (dry type): class E
– IEC degree of protection: IP30
– Ambient conditions:
• Operating temperature: -25 ... +50°C
• Storage temperature: -40 ... +80°C.
• Relative humidity, non condensing: 90%.
Certifications and compliance
Compliant with standards: IEC/EN 60044-1.
For the full range of devices and all technical information please refer to our GENERAL CATALOGUE
31
The products described in this publication are subject to be revised or improved at any moment. Catalogue descriptions and
details, such as technical and operational data, drawings, diagrams and instructions, etc., do not have any contractual value.
In addition, products should be installed and used by qualified personnel and in compliance with the regulations in force for
electrical systems in order to avoid damages and safety hazards.
www.LovatoElectric.com
VIA DON E. MAZZA, 12 - 24020 GORLE (BERGAMO) ITALY
Tel. +39 035 4282111 Fax +39 035 4282200
E-mail: [email protected]
Sales Department: Tel. +39 035 4282354 - Fax +39 035 4282400
LOVATO Electric offices in the world
United Kingdom
Germany
Spain
Poland
Turkey
LOVATO ELECTRIC LTD
Tel. +44 8458 110023
www.Lovato.co.uk
LOVATO ELECTRIC GmbH
Tel. +49 7243 7669370
www.LovatoElectric.de
LOVATO ELECTRIC S.L.U.
Tel. +34 93 7812016
www.LovatoElectric.es
LOVATO ELECTRIC SP. Z O.O.
Tel. +48 71 7979010
www.LovatoElectric.pl
LOVATO ELEKTRK LTD
Tel. +90 216 5401426-27
www.LovatoElectric.com.tr
Czech Republic
USA
Canada
United Arab Emirates
LOVATO ELECTRIC S.R.O.
Tel. +420 226 203203
www.LovatoElectric.cz
LOVATO ELECTRIC INC
Tel. +1 757 5454700
www.LovatoUsa.com
LOVATO ELECTRIC CORP.
Tel. +1 450 6819200
www.Lovato.ca
LOVATO ELECTRIC ME FZE
Tel. +971 4 3712713
www.LovatoElectric.ae
PD88 GB 01 13
LOVATO ELECTRIC S.P.A.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement