Craftsman | 315.116272 | Operator`s manual | Craftsman 315.116272 Operator`s manual

Operator's Manual
RRFTSMR
Palm Grip Finishing Sander
Double Insulated
Model No.
315.116272
Save this manual for future reference
,_
CAUTION:
Read and follow all safety
rules and operating instructions before
first use of this product.
Customer
Help Line: 1-800-932-3188
Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman
Visit the Craftsman
Web page: www.sears.com/craftsman
Estates,
IL 60179
USA
C
983000-043
1-03
US
•
•
Warranty....................................................................................................................................................
2
Introduction
.................................................................................................................................................
2
•
GeneralSafetyRules...................................................................................................................................
3-4
•
SpecificSafetyRules...................................................................................................................................
4
•
Symbols.....................................................................................................................................................
5
•
Specifications
.............................................................................................................................................
6
•
Unpacking
..................................................................................................................................................
6
•
•
Operation
...................................................................................................................................................
7-10
Maintenance
...............................................................................................................................................
11
•
Accessories
................................................................................................................................................
12
•
Exploded
ViewandPartsList.........................................................................................................................
13
•
Parts,Ordering,andService..........................................................................................................................
14
FULL ONE YEAR WARRANTY
ON CRAFTSMAN
SANDER
If this r'RRFlrSMnM tool fails to give complete satisfaction within one year from the date of purchase,
RETURN IT TO THE NEAREST SEARS STORE IN THE UNITED STATES, and Sears will replace it, free of charge.
If this rRnF'rSMRN
date of purchase.
tool is used for commercial or rental purposes, this warranty applies for only 90 days from the
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL 60179
Your sander has many features for making the use of
this tool more pleasant and enjoyable. Safety,
performance, and dependability have been given top
priority in the design of this tool making it easy to
maintain and operate.
_,
Look
Your
for this symbol to point
safety is involved.
out important
,_
safety
WARNING:
Do not attempt to use this tool until
you thoroughly read and completely understand
the operator's manual. Pay close attention to the
safety rules, including Dangers, Warnings, and
Cautions. If you use your tool properly and only as
intended, you will enjoy years of safe, reliable
service.
precautions.
It means
attention!!!
WARNING: The operation of any router can result in foreign objects being thrown into your
eyes, which can result in severe eye damage. Before beginning operation, always wear
safety goggles or safety glasses with side shields and a full face shield when needed. We
recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses
with side shields. Always wear eye protection which is marked to comply with ANSI Z87.1.
2
_
•
WARNING: Read and understand all instructions. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious
personal injury.
SAVE THESE
INSTRUCTIONS
•
Work Area
•
Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
•
Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools may create
sparks which may ignite the dust or fumes.
Keep bystanders, children, and visitors away
while operating a power tool. Distractions can
cause you to lose control.
•
Electrical
•
•
•
Do not overreach. Keep proper footing and
balance at all times. Proper footing and balance
enables better control of the tool in unexpected
situations.
Tool Use and Care
Avoid body contact with grounded surfaces,
such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if
•
Use clamps or other practical way to secure and
support the workpiece to a stable platform.
Holding the work by hand or against your body is
unstable and may lead to loss of control.
•
Do not force tool. Use the correct tool for your
application. The correct tool will do the job better
and safer at the rate for which it is designed.
Do not use tool if switch does not turn it on or
off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
•
your body is grounded.
Don't expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
•
•
Disconnect the plug from power source before
making any adjustments, changing accessories,
or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.
Store idle tools out of the reach of children and
other untrained persons. Tools are dangerous in
the hands of untrained users.
Maintain tools with care. Keep cutting tools
sharp and clean. Properly maintained tools with
sharp cutting edges are less likely to bind and are
easier to control.
When operating a power tool outside, use an
outdoor extension cord marked "W-A" or "W".
These cords are rated for outdoor use and reduce
the risk of electric shock.
Personal
Remove adjusting keys or wrenches before
turning the tool on. A wrench or a key that is left
attached to a rotating part of the tool may result in
personal injury.
Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or
hearing protection must be used for appropriate
conditions.
Double insulated tools are equipped with a
polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does net fit,
contact a qualified electrician to install a polarized outlet. De net change the plug in any way.
Do not abuse the cord. Never use the cord to
carry the tools or pull the plug from an outlet.
Keep cord away from heat, oil, sharp edges, or
moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric
shock.
•
•
Safety
Double insulation [] eliminates the need for the
three-wire grounded power cord and grounded
power supply system.
•
Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be caught in
moving parts.
Avoid accidental starting. Be sure switch is off
before plugging in. Carrying tools with your finger
on the switch or plugging in tools that have the
switch on, invites accidents.
•
Check for misalignment or binding of moving
parts, breakage of parts, and any other condition
that may affect the tool's operation. If damaged,
have the tool serviced before using. Many
accidents are caused by poorly maintained tools.
•
Use only accessories that are recommended by
the manufacturer for your model. Accessories that
may be suitable for one tool, may become hazardous when used on another tool.
Safety
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use tool while tired or under the influence of
drugs, alcohol, or medication. A moment of
inattention while operating power tools may result in
serious personal injury.
3
Service
•
Tool service must be performed only by qualified
repair personnel. Service or maintenance performed by unqualified personnel could result in a
risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized
parts or failure to follow Maintenance Instructions
may create a risk of electric shock or injury.
m
•
Hold tool by insulated gripping surfaces when performing an operation where the tool may contact
hidden wiring or its cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock
the operator.
Additional
Rules For Safe Operation
•
Know your power tool. Read operator's manual
carefully. Learn its applications and limitations,
as well as the specific potential hazards related
to this tool. Following this rule will reduce the risk of
electric shock, fire, or serious injury.
•
Always wear safety glasses. Everyday eyeglasses have only impact-resistant lenses; they
are NOT safety glasses. Following this rule will
reduce the risk of serious personal injury.
Protect your lungs. Wear a face or dust mask if
the operation is dusty. Following this rule will
reduce the risk of serious personal injury.
•
•
Protect your hearing. Wear hearing protection
during extended periods of operation. Following
this rule will reduce the risk of serious personal
injury.
•
Inspect tool cords periodically and, if damaged,
have repaired at your nearest authorized service
center. Constantly stay aware of cord location.
Following this rule will reduce the risk of electric
shock or fire.
•
Check damaged parts. Before further use of the
tool, a guard or other part that is damaged
should be carefully checked to determine that it
will operate properly and perform its intended
function. Check for alignment of moving parts,
binding of moving parts, breakage of parts,
mounting, and any other conditions that may
affect its operation. A guard or other part that is
damaged should be properly repaired or replaced by an authorized service center. Following
this rule will reduce the risk of shock, fire, or serious
injury.
Do not abuse cord. Never carry the tool by the
cord or yank it to disconnect it from the receptacle. Keep cord away from heat, oil, and sharp
edges. Following this rule will reduce the risk of
electric shock or fire.
•
•
Make sure your extension cord is in good condition. When using an extension cord, be sure to
use one heavy enough to carry the current your
product will draw. A wire gage size (A.W.G.) of at
least 16 is recommended for an extension cord
100 feet or less in length. A cord exceeding 100
feet is not recommended. If in doubt, use the
next heavier gage. The smaller the gage number,
the heavier the cord. An undersized cord will cause
a drop in line voltage resulting in loss of power and
overheating.
•
Inspect for and remove all nails from lumber
before sanding. Following this rule will reduce the
risk of serious personal injury.
Drugs, alcohol, medication. Do net operate tool
while under the influence of drugs, alcohol, or any
medication. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
•
•
Save these instructions.
Refer to them frequently
and use them to instruct others who may use
this tool. If you loan someone this tool, loan
them these instructions
also.
Some dust created by power sanding,
,& WARNING:
sawing, grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive
Some examples of these chemicals are:
harm.
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from chemicallytreated lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic
particles.
4
--
i
m
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL
NAME
DESIGNATION/EXPLANATION
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per second)
W
Watt
Power
min
Minutes
Time
,-%,
Alternating Current
Type or a characteristic of current
no
No Load Speed
Rotational speed, at no load
[]
Class 11Construction
Designates double-insulated
construction tools
.../min
Revolutions or Reciprocation
Per Minute
Revolutions, strokes, surface speed,
orbits etc. per minute
Safety Alert
Indicates danger, warning or caution.
It means attention!H Your safety is
involved.
Wet Conditions Alert
Do not expose to rain or use in damp
locations.
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the
explanations with them, deserve your careful attention and understanding. The safety warnings do not by
themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident
prevention measures.
SYMBOL
MEANING
,_
DANGER: Failure to obey a safety warning will result in serious injury to yourself or to others. Always
follow the safety precautions to reduce the risk of fire, electric shock and personal injury.
,_
WARNING:
to obey
a safetytowarning
result
in serious
yourself
or toinjury.
others.
Always follow Failure
the safety
precautions
reduce can
the risk
of fire,
electricinjury
shockto and
personal
,_
yourself or to Failure
CAUTION:
others. Always
to obey follow
a safety
the warning
safety precautions
may result toinreduce
property
thedamage
risk of fire,
or electric
personalshock
injuryand
to
personal injury.
NOTE:
Advises you of information or instructions vital to the operation or maintenance of the equipment.
SAVE THESEINSTRUCTIONS
5
Size of Paper ....................................................................................................................................................
1/4 Sheet
Orbital Motion
Amperes .......................................................................................................................................................................
Input .........................................................................................................................................
120 Volts, 60 Hz, AC only
No Load Speed ...............................................................................................................................................
Orbital Diameter .................................................................................................................................................
Your sander has been shipped completely assembled
and ready for use. After removing it from the box,
inspect it carefully to make sure no breakage or
damage has occurred during shipping and that no parts
are missing. If any parts are damaged or missing,
please call 1-800-932-3188 for assistance.
_
6
1.8
14,000/min
1/16 Inch
WARNING: If any parts are missing, do not
operate your sander until the missing parts are
replaced. Failure to do so could result in possible
serious personal injury.
,_
ELECTRICAL
WARNING: Always wear safety goggles or safety
glasses with side shields when operating your
sander. Failure to do so could result in dust,
shavings, loose particles or foreign objects being
thrown into your eyes, causing possible serious
injury.
KNOW
Your sander has a precision built electric motor. It
should be connected to a power supply that is 120
volts, 60Hz, AC only (normal household current). Do
not operate this tool on direct current (DC). A voltage
drop of more than 10 percent will cause a loss of power
and the motor will overheat. If your tool does not
operate when plugged into an outlet, double-check the
power supply.
YOUR SANDER
Before attempting to use your sander, familiarize
yourself with all operating features and safety
requirements. See Figure 1.
,_
DOUBLE
INSULATION
Double insulation is a concept in safety in electric power
tools, which eliminates the need for the usual three-wire
grounded power cord. All exposed metal parts are
isolated from the internal metal motor components with
protecting insulation. Double insulated tools do not need
to be grounded.
WARNING:
Do not allow familiarity with your
sander to make you careless. Remember that a
careless fraction of a second is sufficient to inflict
severe injury.
SWITCH
Important: Servicing of a tool with double insulation
requires extreme care and knowledge of the system and
should be performed only by a qualified service
technician. For service, we suggest you return the tool
to your nearest authorized service center for repair.
Always use original factory replacement parts when
servicing.
See Figure 1.
Your sander is equipped with a simple switch control
located on the front of your sander. To turn your sander
ON, depress the switch button to the ON position as
shown in figure 1. To turn your sander OFF, depress
the switch button in the opposite direction to the OFF
position.
,_k
Be sure your sander is not ON before connecting to
power supply source.
TO TURN
SANDEROFF
\
CONNECTION
WARNING: The double insulated system is
intended to protect the user from shock resulting
from a break in the tool's internal wiring. Observe
all normal safety precautions to avoid electrical
shock.
SWITCH
TOTURN
SANDERON
SANDPAPER
PAPER
CLAMPLEVER
CUSHION
Fig. 1
7
SELECTING
SANDPAPER
Selecting the correct size grit and type sandpaper is an
extremely important step in achieving a high quality
sanded finish. Aluminum oxide, silicon carbide, and
other synthetic abrasives are best for power sanding.
Natural abrasives, such as flint and garnet are too soft
for economical use in power sanding.
PAPERCLAMP
IN UNLOCKED
POSITION
In general, coarse grit will remove the most material and
finer grit will produce the best finish in all sanding
operations. The condition of the surface to be sanded
will determine which grit will do the job. If the surface is
rough, start with a coarse grit and sand until the surface
is uniform. Medium grit may then be used to remove
scratches left by the coarser grit and finer grit used for
finishing of the surface. Always continue sanding with
each grit until surface is uniform.
Note: To prevent damaging the cushion, DO NOT use
sander without sandpaper installed.
,_
TAB
CUSHION
WARNING:
Your sander should never be
connected to power supply when you are installing
or replacing sandpaper, assembling parts, making
adjustments, when cleaning, or when not in use.
Disconnecting your sander will prevent accidental
starting that could cause serious injury.
INSTALLING
NON-ADHESIVE
PLATEN
PAPER
CLAMP LEVER
Fig. 2
SANDPAPER
See Figure 2.
Inspect sandpaper before installing. Do not use if
broken or defective.
•
,_
UNPLUG YOUR SANDER.
WARNING:
Failure to unplug your sander could
result in accidental starting causing serious injury.
If replacing sandpaper, remove old sandpaper. To
remove old sandpaper, release paper clamp by
lifting up on paper clamp lever and disengaging it
from the tab on the platen.
Insert end of new sandpaper under the paper
clamp.
Lift up on paper clamp lever and lock into place.
Apply downward pressure to conform sandpaper
to platen.
Wrap sandpaper around cushion. Lift paper clamp
lever on opposite end of sander and insert loose
end of sandpaper under the paper clamp. Fit
sandpaper against cushion as tight as possible.
•
NON-ADHESIVE
SANDPAPER
Lift up on paper clamp lever and lock into place.
8
INSTALLING
ADHESIVE
SANDPAPER
See Figure 3.
Inspect sandpaper before installing. Do not use if
broken or defective.
•
,_
UNPLUG YOUR SANDER.
WARNING: Failure to unplug your sander could
result in accidental starting causing serious injury.
•
If replacing sandpaper, remove old sandpaper by
peeling it off cushion. If removing non-adhesive
sandpaper, release paper clamp by lifting up on
paper clamp lever and disengaging it from the tab
on the platen. Then remove non-adhesive
sandpaper, lift paper clamp lever, and return it to its
proper place over tab on platen.
•
Carefully peel adhesive backing from new 1/4 sheet
sandpaper.
•
Position sandpaper into place, then carefully
press sticky side of sandpaper on cushion.
REMOVING
SANDPAPER
BEFORE
-%
PLATEN
PAPERCLAMPIN
LOCKEDPOSITION
STORAGE
CUSHION
Do not store your sander with sandpaper installed. Heat
generated from sanding causes the pressure sensitive
adhesive to flow and form a tight bond between the
cushion and sandpaper.
Removing the sandpaper soon after you have finished a
sanding operation avoids letting the adhesive set up. If
the sandpaper is left on the cushion for an extended
period of time after use, the adhesive will set up and
cause the sandpaper to become difficult to remove. It
may also tear when removing. When this situation
occurs, it becomes difficult to clean the cushion for the
next sandpaper.
ADHESIVE SANDPAPER
Fig. 3
Note: If you forget to remove the sandpaper after a
sanding operation, sand for a few minutes to soften the
adhesive backing before attempting to remove
sandpaper.
9
APPLICATIONS
(Use only for the purposes listed below)
•
Sanding on wood surfaces.
•
Removing rust from and sanding steel surfaces.
,_1
WARNING: Do not wear loose clothing or jewelry
when operating sander. They could get caught in
moving parts causing serious injury. Keep head
away from sander and sanding area. Hair could be
drawn into sander causing serious injury.
OPERATING
THE SANDER
Clamp or otherwise secure the work to prevent it from
moving under your sander.
,_
WARNING: Unsecured work could be thrown
towards the operator causing injury.
Fig. 4
Hold your sander in front and away from you, keeping it
clear of the workpiece. Start your sander by pressing
the switch to ON position and letting the motor build to
its maximum speed. Gradually lower your sander on the
work with a slight forward movement. See Figure 4.
Move it slowly using forward and backward strokes.
DO NOT FORCE. The weight of the unit supplies
adequate pressure, so let the sanding sheet and sander
do the work. Applying additional pressure only slows the
motor, rapidly wears sandpaper and greatly reduces
sander speed. Excessive pressure will overload the
motor causing possible damage from motor overheating
and can result in inferior work. Any finish on resin or
wood may soften from the frictional heat. Do not allow
sanding on one spot too long as the sander's rapid
action may remove too much material, making the
surface uneven. Always lift your sander from workpiece
before turning off.
Flush sanding can be performed with your sander. As
shown in figure 5, the front edge of your sander allows
flush sanding in corners. The two side edges can also
be used when sanding in corners. Always remove
sander from workpiece before turning your sander off.
ORBITAL
Fig._
MOTION
Orbital motion is ideal for fast cutting action when
removing old finishes, smoothing rough wood, cutting
stock down to required dimensions or for finishing
surfaces to be painted. As shown in Figure 6, the
sandpaper moves in tiny circles at a very high speed,
allowing the sander to move easily.
ORBITALMOTION
10
Fig. 6
,_
LUBRICATION
WARNING:
When servicing use only identical
Craftsman replacement parts. Use of any other
parts may create a hazard or cause product
damage.
All of the bearings in this tool are lubricated with a
sufficient amount of high grade lubricant for the life of
the unit under normal operating conditions. Therefore,
no further lubrication is required.
GENERAL
EXTENSION
Only the parts shown on parts list, are intended to be
repaired or replaced by the customer. All other parts
represent an important part of the double insulation
system and should be serviced only by a qualified Sears
service technician.
The use of any extension cord will cause some loss of
power. To keep the loss to a minimum and to prevent
tool overheating, use an extension cord that is heavy
enough to carry the current the tool will draw.
A wire gage size (A.W.G.) of at least 16 is
recommended for an extension cord 100 feet or less in
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, carbon dust, etc.
,_
length. When working outdoors, use an extension cord
that is suitable for outdoor use. The cord's jacket will be
marked WA.
WARNING:
Do not at any time let brake fluids,
gasoline, petroleum-based products, penetrating
oils, etc. come in contact with plastic parts. They
contain chemicals that can damage, weaken, or
destroy plastic.
It has been found that electric tools are subject to
accelerated wear and possible premature failure when
they are used on fiberglass boats, sports cars,
wallboard, spackling compounds, or plaster. The chips
and grindings from these materials are highly abrasive
to electric tool parts such as bearings, brushes,
commutators, etc. Consequently, it is not recommended
that this tool be used for extended work on any
fiberglass material, wallboard, spackling compounds, or
plaster. During any use on these materials, it is
extremely important that the tool is cleaned frequently
by blowing with an air jet.
_
CORDS
WARNING: Always wear safety goggles or safety
glasses with side shields during power tool
operation or when blowing dust. If operation is
dusty, also wear a dust mask.
11
,_
CAUTION:
Keep extension cords away from the
sanding area and position the cord so that it will
not get caught on lumber, tools, etc. during sanding
operation.
,_
WARNING:
Check extension cords before each
use. If damaged replace immediately. Never use
tool with a damaged cord since touching the
damaged area could cause electrical shock
resulting in serious injury.
THE FOLLOWING RECOMMENDED ACCESSORIES ARE
CURRENTLY AVAILABLE AT SEARS RETAIL STORES.
ALUMINUM
OXIDE SHEETS WITH PAPER BACKING (1/4 SHEET)
X-Fine
Fine
Medium
Coarse
PRESSURE SENSITIVE ADHESIVE,
PAPER BACKED SHEETS (1/4 SHEET)
X-Fine
Fine
Medium
Coarse
THE FOLLOWING STANDARD 4-1/2 IN. X 11 IN.
SANDING SHEETS CAN BE CUT TO FIT YOUR SANDER.
NON-LOADING
ALUMINUM
OXIDE SANDING SHEETS
X-Fine
Fine
Medium
Coarse
,_
WARNING:
The use of attachments or accessories not listed above might be hazardous.
12
CRAFTSMAN
PALM GRIP FINISHING
SANDER-
MODEL NO. 315.116272
!
I
The model number will be found on a plate attached to the motor housing. Always mention the model
number in all correspondence
regarding your SANDER or when ordering repair parts.
J
SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS
2
PARTS LIST
Key
No.
Part
Number
Description
1
2
3
4
5
6
7
983421-001
980438-001
973776-002
623019-004
973764-000
974485-001
617966-030
8
973775-002
***
983000-043
Qty.
Data Plate ..........................................................................................................
1
Logo Plate .........................................................................................................
Paper Clamp .....................................................................................................
Rubber Plug ......................................................................................................
Platen (Includes Key Nos. 4 and 8) ..................................................................
Paper Clamp Retainer .......................................................................................
Screw (#8-10 x 5/8 in. Pan Hd.) ........................................................................
Cushion .............................................................................................................
1
2
1
1
2
4
1
Sandpaper .........................................................................................................
Operator's Manual
1
NOTE "A": The assembly shown represents an important part of the double insulated system. To avoid the
possibility of alteration or damage to the system, service should be performed by your nearest Sears
Repair Center. Contact your nearest Sears Retail Store.
* Standard Hardware Item -- May Be Purchased Locally
*** Complete Assortment Available At Your Nearest Sears Retail Store
13
Get it fixed, at your home or ours!
Your Home
For repair-in
your home-of
all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner's manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME
®
(1-800-469-4663)
Call anytime, day or night (U.S.A. and Canada)
www.sears.com
www.sears.ca
Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call or go on-line for the location of your nearest
Sears Parts & Repair Center.
1-800-488-1222
Call anytime,
day or night (U.S.A. only)
www.sears.com
To purchase a protection agreement (U.S.A.)
or maintenance agreement (Canada) on a product serviced
1-800-827-6655
(U.S.A.)
1-800-361-6665
Para pedir servic=o de reparacion
a domicdio, y para ordenar piezas:
1-888-SU-HOGAR
_, Marca
rT
• _ Marque
Reg_strada
/
IH
de commerce
(Canada
Au Canada pour service
en fram;a=s:
1-800-LE-FOYER
SM
Mc
(1-800-533-6937)
www.sears
ca
(1-888-784-6427)
_, Registered Trademark /
by Sears:
"_Trademark / _F
"'_Serv=ce Mark of Sears Roebuck and Co
TF
Marca
ID
/_
de Fabnca
Marque
! _TI Marca de Servlclo
deposee
de Sears
Roebuck
de Sears,
and Co
Roebuck
and Co
_, Sears,
Roebuck
and Co
Download PDF

advertising