QuickSpecs
QuickSpecs
Magnetic Stripe Reader for HP ap5000
Overview
Models
HP ap5000 Magnetic Stripe Reader
BZ721AA
Introduction
Specifically designed for integration with HP ap5000 All-in-One Point-of-Sale (POS) system, this compact Magnetic Stripe Reader
device provides high performance, reliable operations in a space saving design, with a clean look.
The Magnetic Stripe Reader (MSR) for HP ap5000 reads up to three tracks of information with a single swipe of a magnetic stripe
card bi-directionally. An audible indicator (beeper) confirms a successful read. It automatically distinguishes between formats. At just
3.5 inches long - about the length of a credit card, with simple design and integration to HP ap5000, the MSR provides a clean look
without any cable clutters.
DA - 13965
Worldwide — Version 1 — February 8, 2011
Page 1
QuickSpecs
Magnetic Stripe Reader for HP ap5000
Overview
Key Benefits
Ideal for retail environments where counter space is limited
Integrated MSR minimizes cable clutter
Automatically distinguishes between magnetic data formats
Reads up to three tracks of information with a single swipe
Quick and easy card scanning with bi-directional read capabilities
Flexible and accurate read with various swipe speed
Compatibility
Compatible with HP ap5000 AiO Point-Of-Sale system
NOTE: Not all models are available in all regions.
Service and Support
Your HP branded Peripheral Limited Warranty is a three (3) year (HP Option Limited Warranty Period) parts replacement warranty.
DA - 13965
Worldwide — Version 1 — February 8, 2011
Page 2
QuickSpecs
Magnetic Stripe Reader for HP ap5000
Technical Specifications
General
Magnetic stripe formats
Card Swiping Direction
Card Swiping Speed
Indicators
Decoding Method (ISO)
Mechanical
Interface/Connection
Dimensions (LxWxH)
Interface
Connection
Power
Environment
Drivers
Operating Systems
(compatible with)
ISO 7810, 7811 1/5, 7812, 7813
Bi-directional
3 inch/sec to 100 inch/sec ( 7cm/sec to 250 cm/sec)
Buzzer
Track 1: IATA
Track 2: ABA
Track 3: THRIFT
3.54 x 0.88 x 0.95 in (9.00 x 2.243 x 2.42 cm)
RS-232C (Default on COM4 as shipped from HP factory)
Integrated internal
Baud Rate
19200 bps (ASCII)
8
Data Bit
None
Parity
1
Stop Bit
None
Flow Control
5 VDC +/- 10%
Voltage (typical)
-10 to +60 degrees C.
Operating
10% to 90% relative
Humidity
Windows native, OPOS, JPOS
Genuine Windows 7 Professional* (32-bit)
Genuine Windows Vista® Business** (32-bit)
Genuine Windows XP Professional
Genuine Windows Embedded POSReady 2009
*This system may require upgraded and/or separately purchased hardware and/or a DVD drive to install
the Windows 7 software and take full advantage of Windows 7 functionality. See
http://www.microsoft.com/windows/windows-7/ for details.
Reliability
Option kit contents
** Certain Windows Vista product features require advanced or additional hardware. Windows Vista
Upgrade Advisor can help you determine which features of Windows Vista will run on your computer. To
download the tool, visit: http://www.windowsvista.com/upgradeadvisor. For Windows Vista system
requirements, visit: http://www.windowsvista.com/systemrequirements
1,000,000 card swipes minimum
Magnetic Stripe Reader for HP ap5000 AiO POS System
Copyright © 2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without
notice and is provided "as is" without warranty of any kind. The warranties for HP products are set forth in the express limited
warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. HP
shall not be liable for technical or editorial errors or omissions contained herein.
DA - 13965
Worldwide — Version 1 — February 8, 2011
Page 3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement