WUXGA 6500 Lumens Lens shift Extensive lens options Dual lamp EH7500 Spectacular image quality, outstanding brightness and ultimate reliability Introduction For more than ten years Optoma has been one of the world’s foremost projector designers and manufacturers - amongst the very few companies that focus exclusively on projectors. Today the Optoma ProScene range represents the evolution of projection expertise, honed and refined by manufacturing and supporting millions of projectors the world over. This knowledge and skill has been distilled into the ProScene products and support services which are designed specifically for demanding professional applications. 99 Higher education 99 Lecture theatres 99 Houses of worship 99 Museums 99 Auditoriums 99 Boardrooms 99 Broadcast studios 99 Large classrooms 99 Exhibitions 99 Conference rooms 99 Digital signage 99 Stage shows 99 Live events 99 Projection Mapping 99 Meeting rooms 99 Post production 99 Theatre 99 Trade shows ProScene Certified Partners Optoma understands that for ProScene customers, their high specification projector must be of exceptional quality and that the level of support and expertise provided by AV installers and integrators must also be of the highest calibre. To maintain this standard throughout, we have selected only the very best from within the AV industry to become ProScene Certified Partners. These rigorously selected partners understand your specific requirements and perhaps as importantly, they have direct access to the specially-trained Optoma support and service teams. Our dedicated experts are available from the initial design and planning phase of a project, right through to the installation stages and beyond. Through our partners, you’ll have access to what is probably the most extensive network of service centres across Europe of any projector manufacturer. Choosing your ProScene projector is just the start. Total support and service excellence are the core of the ProScene ideology, ensuring industry leading dedication to giving you the highest standard of expertise from Optoma and from our certified partners. Features The ProScene EH7500 is the epitome of our projection expertise in a single product; a revolution; a product designed exclusively for demanding professional applications. Dual-lamp, WUXGA and 6500 lumens delivers bright crystal clear images, ultimate reliability and 24/7 operation to ensure that this is a projector on which you can rely. The dust-sealed, filter-free design prevents dust and dirt from affecting the system – ensuring optimal image quality with minimal maintenance. Motorised lens shift, focus and zoom combined with the extensive lens options and interchangeable colour wheels, provide installation flexibility for simple, trouble free use in a wide variety of situations. EH7500 features 24/7 Operation 6500L Native WUXGA (1920x1200) - 50% more pixels that SXGA+ Dual Lamp – 24/7 operation, multiple redundancy, longer service intervals Installation flexibility - 5x Lens options, motorised lens shift, focus and zoom Interchangeable colour wheel – Tailor the performance to suit the application Image Quality Superb image quality is at the heart of every ProScene product design. At every step, commencing with the incredibly reliable, high resolution WUXGA DLP® chip, where the image is initially created, via the P-VIP lamp pulsing technology that fine tunes the colour to exacting standards, through to the precision optics to focus the image on a screen, accuracy and integrity of the image are paramount. ProScene chose DLP® technology for its image quality and unmatched reliability. The reflective nature of DLP® micro-mirror technology provides highly efficient bright images with great contrast whilst maintaining precise colour accuracy and natural, real-world colour reproduction. For demanding professional applications, the proven reliability of DLP® technology makes it the obvious choice. P-VIP lamps Lamp Pulsing Technology The dual Osram 330W P-VIP lamps provide the highest possible luminance, the essential prerequisite of all highly-efficient projectors. These lamps stay brighter for longer, provide a long operating life and a low loss of luminous flux throughout that life. In addition, the lamp drivers are specifically tuned for the lamps, ensuring not only optimum operating conditions for every situation, but also provide sophisticated lamp pulsing modes and the assurance that colour can be fine tuned according to the application. Advanced lamp-pulsing technologies enable colour performance to be fine tuned directly from the lamp. This unprecedented control helps create vibrant, perfectly saturated colours across the whole light spectrum and produces stunningly natural, life-like images. I video frame Rotation 1 R Y G Rotation 2 C M B R Y G C M Image colour and size control B Lamp Current Brilliant Pulse Dark Pulse Tuned Plateau XGA SXGA+ With Without With Without 1080p WUXGA Where detail really matters, the full WUXGA (1920 x 1200) resolution offers 15% more pixels than 1080p and 60% more than SXGA+. This enables unscaled Full HD video and extra detail. Time Code information can be displayed onscreen at the same time, perfect for soundtrack recording & video editing where precise timing can be critical. Amazing Colour The EH7500 incorporates BrilliantColor™ technology to produce stunningly bright images with perfectly balanced life-like colours. Precision Optics Aspherical optical elements and the use of Low Dispersion (LD) glass maintain optimum sharpness and focus uniformity over the entire image. The ProScene insistence on uncompromising optical quality ensures extremely low colour flare and chromatic aberration resulting in a crystal clear, high contrast image. Reliability All ProScene projectors are designed for continuous 24/7 operation. Only the most reliable, industry proven components are used to ensure superior reliability. This hard-earned “capability” has been meticulously developed over a decade of designing and supporting millions of projectors the world over. ProScene customers can therefore be confident that, as one of the most reliable projector brands in the industry today, Optoma has a reputation for service excellence that is well deserved. Dual Lamps DLP® Technology Dual lamps enable a level of reliability simply unavailable with a single lamp projector. Both lamps can be used together to achieve maximum brightness, whilst still providing redundancy should one of the lamps fail. Alternatively a single lamp can be used in Relay Mode to combine the full lifetime of each individual lamp and thereby minimise service intervals. DLP® technology from Texas Instruments® is widely recognised and acclaimed for its unmatched reliability and long lasting image performance. When combined with high brightness and native contrast ratios, it becomes the obvious choice for demanding applications. Independent testing has proven DLP® to be the most reliable of projector technologies. Whilst the competition may show image quality decline after only a few thousand hours, DLP® technology can remain unchanged over hundreds of thousands of hours. Total Cost of Ownership Lamp Relay mode For challenging installations where the EH7500 is run for long periods, the Lamp Relay function can be used to automatically switch between lamps. Lamp 1 Lamp 2 1 2 hr For demanding applications the total cost of ownership of a projector is not in the purchase cost and replacement lamps but in expensive maintenance and service. ProScene projectors require very little maintenance, have no user serviceable parts inside and no filters that require periodic replacement. The result is low cost, predictable service cycles, enabling planned down time to be minimised. We are so confident that the EH7500 image colour quality will remain as good as the day you bought it that Optoma will guarantee it for five years. 12 hr 5 Flexibility Installation Flexibility Motoroised Lens Shift Flexibility To help meet the seemingly limitless challenges of ProAV installations the EH7500 provides 5 lens options with motorised zoom and focus to ensure you can get the image size you require. Motorised lens shift helps you get the image exactly where you want it and the 2 colour wheel options ensure you can match the image quality and brightness exactly to the application’s requirements. WUXGA +60% Shift Range Lens Position: Center There are 5 optional lenses, 4 of which can be easily adjusted via motorised lens-shift, zoom and focus. -20% 10% 10% Picture-in-Picture and Side-by-Side display Display 2 sources simultaneously with a small inset from the main image or display both sources side by side. Projector Interchangeable colour wheels Two colour wheel options ensure the performance characteristics of the EH7500 can be tailored to match the application. The standard colour wheel maximises brightness whilst ensuring good colour reproduction, whereas the enhanced-colour “video” wheel maximises colour performance and accuracy. The colour wheels are interchangeable modules and can be fitted or exchanged on site without removing the projector cover. Compare two sets of data side-by side; the possibilities are endless. Bright (Standard) Video (Optional) Lens Options Optoma model name Throw Ratio WT1 0.78 WT2 1.22 ~ 1.47 ST1 1.45 ~ 1.95 TZ1 1.93 ~ 3.71 TZ2 3.68 ~ 7.04 Control System Integration Control Multiple EH7500 can be monitored over LAN and also provide the user with an email message alert in case an error occurs or a lamp fails or needs to be replaced. The web browser interface can also control all aspects of the EH7500. PC PC EH7500 PC remote control e-mail LAN Global monitoring of all AV devices Track projector lamp life Email alerts and instant notificationshelp desk requests, service reminders, device failure or theft e-mail LAN Event Scheduling PC PC INTERNET Ultimate control Cut up to 30% from your engergy bills using 24-hour automated power scheduling to ensure that projectors power off when not in use. 1 5 6 7 8 Download Crestron RoomView® Express for free at www.crestron.com/getroomview 2 3 1 Help Alert Real-time interactive Help Desk requests are sorted to come to the top. The Help Desk then has the ability to respond with an automatic message or instant message the room with exact procedures. 2 Display Power Check on/off status of display power and system power. View a bar graph to monitor the percentage of available projector lamp life and set an alert to notify the services department when a replacement lamp should be ordered before the lamp fails. 3 Display Usage 4 Schedule Event RoomView Express makes scheduling of recurring or one time events easy. Setting RoomView to automatically power down at midnight throughout the week can save valuable lamp life and ensure security inside the facility. 5 Selected View by Rooms, Attributes or Contacts RoomView Express gives you the ability to simultaneously view more than 250 rooms from a single screen. Customise RoomView to view by room name, locations and group 6 Room Name and Location (sortable) 7 Online Status 8 Event Log Automatically generates log files, reports and charts to analyze ROI and budget allocation. Track device usage, call statistics and user history. 9 Projector Power 4 9 Lenses Lens Options Optoma model name Focal Lenght (f) (mm) F number Zoom Range (Ratio) Zoom & Focus Adjustment Throw Ratio Throw Distance (m) Throw Distance (feet) Projection Image Size WT1 11.73 2.2 Fixed Fixed 0.78 0.5 ~ 8.4 1.65 ~ 27.6 Motorized Lens Shift WT2 18.1 ~ 21.72 2.0 ~ 2.3 1.2x 1.22 ~ 1.47 0.79 ~ 15.8 2.59 ~ 51.9 ST0/ST1 21.5 ~ 28.7 2.0 ~ 2.3 1.33x TZ1 28.6 ~ 54.33 2.2 ~ 3.0 1.9x Motorized 1.45 ~ 1.95 1.93 ~ 3.71 0.94 ~ 21.0 1.25 ~ 40.0 3.07 ~ 68.9 4.09 ~ 131.1 30” ~ 500” inches Fixed TZ2 54.06 ~ 102.7 2.3 ~ 3.16 1.9x 3.68 ~ 7.04 2.38 ~ 75.8 7.8 ~ 248.7 Horizontal: + / - 10% offset Vertical:- 20%~ + 60% offset Throw Distance Chart EH7500 Throw Distance Diagonal Image Size 50” 60” 70” 80” 100” 150” 200” 250” 300” WT1 WT2 ST0 / ST1 TZ1 TZ2 Fixed (m) Min (m) Max (m) Min (m) Max (m) Min (m) Max (m) Min (m) Max (m) 0.84 1.01 1.18 1.35 1.68 2.52 3.36 4.2 5.04 1.3 1.56 1.82 2.08 2.61 3.91 5.21 6.52 7.82 1.58 1.9 2.20 2.53 3.16 4.75 6.33 7.92 9.5 1.56 1.87 2.19 2.5 3.12 4.68 6.25 7.81 9.37 2.1 2.52 2.94 3.36 4.2 6.3 8.4 10.5 12.6 2.08 2.49 2.91 3.33 4.16 6.24 8.32 10.39 12.47 4.0 4.8 5.59 6.39 7.99 11.99 15.98 19.98 23.97 3.97 4.76 5.55 6.34 7.95 11.89 15.86 19.82 23.78 7.58 9.1 10.61 12.13 15.16 22.75 30.33 37.91 45.49 For guide purposes only Green Eco Friendly Cut up to 30% from your engergy bills using 24-hour automated power scheduling to ensure that projectors power off when not in use. Direct Power On The projector will start up instantly when power is supplied to the Unit. This eliminates the need to manually turn on the projector via the remote control or the keypad, ideal for use in rooms with a “master” power switch. Signal Power On The projector will power on when it receives a signal through one of the PC/video inputs. This ensures that the projector is only switched on when it is needed. Auto Power Off If after a pre-determined time the projector does not receive a signal, it will turn itself off automatically, conserving power and extending the life of the lamp. Eco Standby Mode Reduces energy consumption to less than 1W when the projector is not in use. We know that improving our products is the best way to reduce our impact on the environment. That’s why at Optoma, we design our products to have a long usable life, use fewer materials, ship with the minimum packaging and be free of all possible toxic substances. Naturally, energy efficiency and being recyclable are built in at the design stage. With each new product, we strive towards minimising our environmental impact. For full details of Optoma Project Green please visit our website. Dimensions Labelling Easy to use remote control 1 17 1 Power On 2 Power Off 3 Function 2 4 Lens Zoom +/5 Lens Shift 6 LED Indicator 7 Display Mode 8 Keystone +/9 TV Tigger On/Off 10YPbPr 11RE-sync 12 VGA 1 13 Audio In (VGA 1 & 2) 14BNC 15S-Video 16 Numberd keypad (for password input) 17Freeze 18 AV Mute 19 Function 1 20 Lens Focus +/21 Enter Help 22 Four Directional Select Keys 23Menu 24 Format (Image Aspect Ratio) 25Information 26 HDMI 1 27 HDMI 2 28Video 2 18 3 19 20 4 21 5 6 22 23 7 24 8 9 25 10 26 11 27 12 28 13 16 15 14 29 30 31 32 Input/Output Connections 29 S-Video Input Connector 30 Composite Video Input Connector 31 Component Video Input Connector (YPbPr) 32 BNC Input Connector (YPbPr/RGBHV) 33 Kensington™ Lock Port 34 RJ-45 Networking Connector 35 VGA-Out Connector (Monitor Loop-through Output) 36 VGA2-In/YPbPr Connector (PC Analog Signal/Component Video Input/HDTV/YPbPr) 37 VGA1-In/YPbPr Connector (PC Analog Signal/Component Video Input/HDTV/YPbPr) 38 HDMI 1 Connector 39 HDMI 2 Connector 40 12V Trigger Relay Connector (12V, 250mA) 41 RS-232 Connector (9-pin DIN Type) 42 Power Switch 43 Power Socket Key pad 44Power 45Source 46Re-Sync 47 Lens Shift 48Info 49Menu 50Enter 51Focus 52 AV Mute 53 Control Keys 54Zoom 33 34 35 36 37 38 39 40 41 42 44 45 46 47 48 49 50 51 52 53 54 43 Technical Specifications Projector DLP™ Technology by Texas Instruments Technology 0.67” WUXGA, DC3,Type A chip Resolution Native WUXGA (1920 x 1200) Brightness - Dual Lamp Aspect Ratio Refresh Rate Contrast Video Compatibility 6000 ANSI lumens / 6500 centre lumens using “Bright” colour wheel 16:10 native, 4:3 & 16:9 compatible 15kHz to 100kHz / 25Hz to 85Hz 2000:1 PAL (625/576i/p), SECAM, NTSC (525/480i/p), HDTV (720p, 1080i, 1080p) Lamp Type Lamp Life Colour Wheel Options 2 x 330W P-VIP 2000 hr bright mode / 2500 hr ECO mode (5000 hr ECO relay mode) Bright wheel 6 Segment RGBCYW Video wheel 6 Segment RGBCYM Motorised lens shift, focus and zoom (+60% -20% V, ±10% H) Optics Lens Shift Lenses (no lens supplied as standard) WT1 WT2 ST0 ST1 TZ1 TZ2 Keystone Correction Uniformity Short throw 0.78 (Fixed) Wide 1.22~1.47 (1.2x zoom) Standard 1.45~1.95 (1.33x zoom) High quality” 1.45~1.95 (1.33x zoom) Long 1.93~3.71 (1.9x zoom) Extra long 3.68~7.04 (1.9x zoom) Horizontal +20° / vertical ±20° 95% (centre) Connectivity Inputs Output Control and Communication 2 x HDMI (with locking screw) BNC (RGBHV) PC RGB 2 x 15 Pin D-Sub VGA Component 3RCA S-Video/Composite 4 pin Mini DIN / RCA PC (monitor loop-through) VGA Out +12V trigger low-voltage DC connector RS232 9pin D-SUB RJ45 General Noise Level Weight Dimensions (W x D x H) Power Requirements Power Consumption Heat Dissipation Operating Conditions Portrait mode1 360’ Operation Operating Temperature Environmental Conformances Security Warranties 39dB 24Kg (without lens) 439 x 549 x 235mm 100 – 240V AC @ 50 – 60Hz 900w bright mode < 1w standby mode 3171 BTU/hr. 760w ECO mode <1w standby mode 5 ~ 35˚C, max. humidity 85%, max. altitude 3000m Not supported Not supported 0 -- 2500 ft, 5 -- 40˚C 2500 -- 5000 ft, 5 -- 35˚C RoHS and WEEE CE, TUV-GS, CB 4-digit PIN code Kensington Lock port 3 Years Supplied Accessories Cables Other VGA cable AC power cord Infra-red remote control, 4x IR code sets for controlling multiple units. Batteries x 2 User manual CD Quick start card Warranty card WEEE card Accessories Flying Frame EH7500 Part Nr: P5640 The safest way for handling a projector in rental & staging applications is by using it in combination with a flying frame. The projector is fitted on a bottom frame that is adjustable in 3 axes, allowing the projector to be lined out on screens with high accuracy. This frame can be used in combination with a second frame and projector for i.e. 3D. The stack frame has mounting holes for truss hooks or chains. A projector mount (392311b) is necessary to fix the projector to the stack frame (4 x 8M). Short Ceiling Mount Part Nr: 390065b The universal ceiling mount 390065b is a rigid and strong ceiling mount suited for suspending EH7500 or EX855 and EW865 projectors from the ceiling. • • • • • Maximum load 70 Kg Standard equipped with the patented ball-joint. Maximum adjustment angle 20 degrees Fixed length of 165 mm Mounting pattern 90 x 90 mm suited for EH7500 and EX855/ EW865 projector mounts Long Ceiling Mount Part Nr: 390061b The universal ceiling mount 390061b is a rigid and strong ceiling mount suited for suspending EH7500 or EX855 and EW865 projectors from the ceiling. • • • • • Maximum load 70 Kg Standard equipped with the patented ball-joint Maximum adjustment angle 20 degrees Adjustable between 700-940 mm Mounting pattern 90 x 90 mm suited for EH7500 and EX855/ EW865 projector mounts Projector Base Plate Part Nr: 392311b for EH7500 Part Nr: 392315b for EX855/EW865 The above will need a projector base plate, EH7500 (392311b) and the EX855/EW865 (392315b). Both base plates use 4 x 8M screws to attach your projector and the ceiling mount plate uses 4 x M6. Accessories Continued 17990 Flight Case EH7500 Heavy Duty flight case with wheels and handles and can also carry two extra lens plus space for cables and remote. • • • Part Number: 17990 Weight 32 kilo Shipping dimensions 930 x 555 x 445mm Accessories Continued Optimised edge blending (Available direct from optoma) Optoma have worked in partnership with Calibre to produce special versions of Calibre’s edge blending and warping products optimised for use with our ProScene projectors. This unique collaboration significantly reduces the complexity and configuration time required to edge blend multiple ProScene projectors and is covered by the industry leading ProScene technical support services should you require assistance with your edge blending project. HQView320 HQV™ Scaler with Warp and Edge Blend Best in class professional image processing in a compact affordable module. HQView325 HQV™ Scaler with Warp Mapping Edge Blend & HDMI/DVI In/Out HQView325 features 4-sided soft edge blend with multi-region black level correction for seamless blending of multiple projectors. HQView520 Universal HQV™ Scaler–Switcher-Scan Converter with Warp, Edge Blend & 3G-SDI In/Out Use as a routing switcher and universal interface for 3G-SDI, HD-SDI, DVI or HDMI HQView530 LED Screen HQV™Scaler-Switcher with 3G-SDI LEDView530 is a highly flexible LED video screen image scaler which provides stunning image quality for professional, broadcast, sports, digital signage & corporate AV. Offices Worldwide technical and commercial support Optoma Europe Optoma Scandinavia Optoma Europe Ltd. Optoma Scandinavia 42 Caxton Way The Watford Business Park Watford Hertfordshire WD18 8QZ UK Tel: +44 (0) 1923 691 800 Fax: +44 (0) 1923 691 888 Lerpeveien 25 Postboks 9515 Åskollen 3038 Drammen Norway Tel: +47 32 98 89 90 Fax: +47 32 98 89 99 Optoma Deutschland GmbH Optoma USA Headquarters WIESENSTRASSE 21 D40549 Düsseldorf Germany Tel: +49 (0) 211 506 6670 Fax: +49 (0) 211 506 66799 3178 Laurelview Ct. Fremont, CA 94538 Tel: (510) 897-8600 Fax: (510) 897-8601 Optoma USA Atlanta Sales Office Optoma France Batiment E 81-83 avenue Edouard Vaillant 92100 Boulogne Billancourt France Tel. : +33 (0) 1 41 46 12 20 Fax: +33 (0) 1 41 46 94 35 Optoma Spain C/ José Hierro,36 Of. 1C 28529 Rivas VaciaMadrid Madrid Spain Tel: +34 91 499 06 06 Fax: + 34 91 670 08 32 Optoma Benelux Optoma Benelux BV Randstad 22-123 1316 BW Almere The Netherlands T: +31 (0) 36 820 0252 F: + 31 (0)36 548 9052 Local Representatives Turkey UAE Poland Russia Italy 7000 Central Park NE, Suite 570, Atlanta, GA 30328 Tel: (678) 281-2228 Fax: (770) 399-3035 Canadian Sales Office 2420 Meadowpine Blvd, Suite 105, Mississauga, ON L5N 6S2, CANADA Tel: (905) 285-0685 Optoma Asia Taiwan Optoma Corporation Taipei Office 5F., No. 108, Minchiuan Rd. , Shindian City, Taipei Taiwan 231, R.O.C. Tel:：+886-2-2218-2360 Fax:：+886-2-2218-2313 http://www.optoma.com.tw China Shanghai Office 5F, No. 1205 Kaixuan Road, Changning District , Shanghai Tel: +86-21-6294-7376 Fax: +86-21-6294-7375 http://www.optoma.com.cn Beijing Office 20D apartment 3, Build No.3, Yindu Tower, No 48 ZhiChun road, HaiDian district, Beijing Tel: +86-10-5873-1919 Fax: +86-10-5873-1919 *8018 ShenYang Office Room1201, building C3, Wulihe Tower, No 4-1 WenTi road, HePing district, ShenYang Tel:：+86-024-3188-7018 Fax:：+86-024-3188-7018-808 Xi’an Office Room 1310, building B, ShiMao tower, GuanDongZheng street, Xi’an Tel: +86-029-8228-2428 Fax: +86-029-8228-2428 GungZhou Office Room 602, NanTie Tower, No.57 No.1ZhongShan road, YueXiu district, GungZhou Tel: +86-20-6128-0990 / 6128-1025 Fax: +86-20-6128-1027 ChongQing Office Room 9-2, building 19 HuaYuMingDu, ShiQiaoPu, ChongQing Tel: +86-23-6879-7626 Fax: +86-23-6879-7725 Taichung Office ChengDu Office 7F-5, No.3, Lane 2, 1st Rd, Taichung Industrial Park, Xitun Dist., Taichung City, 40767, Taiwan, R.O.C. Tel:：+886-4-3505-0336 Fax:：+886-4-3505-0338 Room A3 floor 20, building A Time digital square, No.1 South RenMin road, ChengDu Tel: +86-28-8523-1553 / 8631-7092 Kaohsiung Office Rm. D, 7F, No.108, Zhonghua 3rd Rd., Qianjin Dist., Kaohsiung City 80145, Taiwan, R.O.C. Tel:：+886-7-952-5689 Fax:：+886-7-241-2197 Hong Kong Office Unit A, 27/F., Dragon Centre, 79 Wing Hong Street, Cheung Sha Wan, Kowloon, Hong Kong Tel:：+852-2396-8968 Fax:：+852-2370-1222 http://www.optoma.com.hk Optoma Europe Ltd. 42 Caxton Way, Watford Business Park, Watford, Hertfordshire, UK. WD18 8QZ www.optoma.co.uk V12 - 08/11/12 1 Restrictions may apply, please check the Optoma website for more information. Brightness and lamp lifetime will vary depending on selected projector mode, environmental conditions and usage. As is common with all lamp based projectors, brightness will decrease over the lamp lifetime. Typical lamp life achieved through testing. Will vary according to operational use and environmental conditions. Optoma guarantees that in normal use, Optoma DLP® colour quality will be indistinguishable from when new. Exclusions: (a) Guarantee is voided if the projector is subject to damage through misuse. (b) Guarantee may be void in industrial or commercial entertainment environments where dust or smoke is excessive (c) Guarantee will not apply if lamp brightness is below 50% due to wear or if the projector is not working due to other faults. (d) Over time worn lamps within all projector types will show a slight colour variance. Copyright © 2011, Optoma Europe Ltd. All other product names and company names used herein are for identification purposes only and may be trademarks or registered trademarks of their respective owners. Crestron®, the Crestron and RoomView® logo are registered trademarks of Crestron Electronics, Inc. Errors and omissions excepted, all specifications are subject to change without notice. DLP®, BrilliantColor™ and the DLP logo are registered trademarks of Texas Instruments. All images of products are for representation purposes only. Whilst every care is taken to provide accurate images of our products, actual products may differ slightly. Some product images may have been digitally altered by us to add an Optoma logo to the front panel. Optoma reserves the right to amend or alter actual product or product images without notice. Some images may be simulated.