ML8511A GENERAL DESCRIPTION

ML8511A GENERAL DESCRIPTION
FEDL8511A-02
Issue Date: October 6, 2015
ML8511A
UV Sensor with Voltage Output
GENERAL DESCRIPTION
The ML8511A is a UV sensor, which is suitable for acquiring UV intensity indoors or outdoors. The ML8511A
is equipped with an internal amplifier, which converts photo-current to voltage depending on the UV intensity.
This unique feature offers an easy interface to external circuits such as ADC. In the power down mode, typical
standby current is 0.1μA, thus enabling a longer battery life.
FEATURES
• Photodiode sensitive to UV-A and UV-B
• Embedded operational amplifier
• Analog voltage output
• Low supply current (300μA typ.) and low standby current (0.1μA typ.)
• Small and thin surface mount package (4.0mm x 3.7mm x 0.73mm, 12-pin ceramic QFN)
APPLICATIONS
• Smart phone, Smart watch, Wealable helthcare device, Weather station,Bicycle navigation, Accessary
BLOCK DIAGRAM
VDD
EN
7
4
Amplifier
8
OUT
UV Photodiode
ML8511A
5
10
GND
TR
PIN CONFIGURATIONS
Pin
7
Symbol
VDD
I/O
PW
5
4
GND
EN
PW
I
8
10
OUT
TR
O
I/O
1,2,3,6,9,11,12
NC
-
Function
Supply voltage. Decouple this pin to ground with 0.1 μF
capacitor.
Ground
Active high enable pin. (High: Active mode, Low: Standby
mode)
Output (Low in power down or standby mode)
Internal reference voltage. Decouple this pin to ground
with 1 nF capacitor.
No Connection. Do not connect.
1/8
FEDL8511A-02
ML8511A
EXAMPLE OF CONNECTING DIAGRAM
ML8511A
7
VDD
OUT
0.1uF
EN
5
GND
8
4
ADC
PORT
TR
10
1nF
* Load resistance of OUT port is recommended more than 100 kΩ.
2/8
FEDL8511A-02
ML8511A
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Condition
Rating
unit
VDD
Ta=25 °C
-0.3 to +4.6
V
Input Voltage
VI
Ta=25 °C
-0.3 to +4.6
V
Output Short Current
IOS
Ta=25 °C
5
mA
Power Dissipation
PD
Ta=25 °C
30
mW
Storage Temperature
Tstg
-
-30 to +85
°C
Supply Voltage
RECOMMENDED OPERATION CONDITIONS
Parameter
Symbol
Min.
Typ.
Max.
unit
Operating Voltage
VDD
2.7
3.3
3.6
V
Operating Temperature
Ta
-20
-
70
°C
ELECTRO-OPTICAL CHARACTERISTICS
(VDD=+2.7V to +3.6V, Ta= -20°C to +70°C)
Parameter
Symbol
Condition
Min.
Typ.
Max.
unit
Supply Current (active mode)
IDDA
VEN=VDD
-
300
500
μA
Supply Current (standby mode)
IDDS
VEN=0
-
0.1
1
μA
Input Voltage (High level)
VIH
-
VDD × 0.8
-
VDD + 0.3
V
Input Voltage (Low level)
VIL
-
-0.2
-
0.72
V
High level input current
IIH
VEN=VDD
-
-
1
μA
Low level input current
IIL
VEN=0
-1
-
-
μA
Wavelength of maximum sensitivity
λp
Ta=25°C
-
365
-
nm
Output Setup Time
TSU
-
-
1
ms
Output Voltage (Shading) *
VREF
VEN=VDD
Ta=25°C,
VEN=VDD
Ta=25°C,
VEN=VDD
0.95
1.0
1.05
V
2.08
2.2
2.32
V
Output Voltage (10mW/cm2 at λp) *
VO
* Load resistance of OUT port is recommended more than 100 kΩ.
3/8
FEDL8511A-02
ML8511A
OUTPUT VOLTAGE– UV INTENSITY CHARACTERISTICS
VDD=3.0V
3.5
Output Voltage (V)
3.0
2.5
2.0
75 ℃
25 ℃
1.5
-5 ℃
1.0
-25 ℃
0.5
0
3
6
9
12
2
UV Intensity (mW/cm ) @ λ365nm
15
SPECTRAL RESPONSIBILITY CHARACTERISTICS
Ta=25°C, VDD=3.0V
Relative Responsivity
1.0
0.8
0.6
0.4
0.2
0.0
280
320
360
400
440
480
520
560
Wavelength (nm)
4/8
FEDL8511A-02
ML8511A
TIMING CHART
Supply voltage and EN signal state should take one of the following procedures:
1. EN should be HIGH or LOW at the same time when VDD is applied.
2. EN should be HIGH or LOW while VDD is applied.
Output should be read after output voltage level becomes stable. Maximum time required until stable output
voltage reaches is 1 millisecond after EN goes HIGH.
VDD
EN
TSU
OUT
5/8
FEDL8511A-02
ML8511A
PACKAGE DIMENSIONS
(Unit: mm)
Top view
Bottom view
Cautions
Do not touch the surface of the resin covering the top of the package as the resin is scrached easily and
bonding wires under the resign may be dameged.
Specifications are defined without considering the UV absorption by an external cover material. If a cover is
used over the sensor, take the UV transparancy of the cover into consideration.
6/8
FEDL8511A-02
ML8511A
REVISION HISTORY
Document No.
FEDL8511A-01
FEDL8511A-02
Date
Page
Previous
Current
Edition
Edition
April. 1, 2015
-
October 6, 2015
Description
Initial release
1
1
Block diagram and pin configurations are
modified with removal of internal bonding wires.
6
6
Added “Top view” and “Bottom view”.
7/8
FEDL8511A-02
ML8511A
Notes
1) The information contained herein is subject to change without notice.
2) Although LAPIS Semiconductor is continuously working to improve product reliability and quality,
semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent
personal injury or fire arising from failure, please take safety measures such as complying with the
derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and
fail-safe procedures. LAPIS Semiconductor shall have no responsibility for any damages arising out of
the use of our Products beyond the rating specified by LAPIS Semiconductor.
3) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products.The peripheral conditions
must be taken into account when designing circuits for mass production.
4) The technical information specified herein is intended only to show the typical functions of the
Products and examples of application circuits for the Products. No license, expressly or implied, is
granted hereby under any intellectual property rights or other rights of LAPIS Semiconductor or any
third party with respect to the information contained in this document; therefore LAPIS Semiconductor
shall have no responsibility whatsoever for any dispute, concerning such rights owned by third parties,
arising out of the use of such technical information.
5) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication,
consumer systems, gaming/entertainment sets) as well as the applications indicated in this document.
6) The Products specified in this document are not designed to be radiation tolerant.
7) For use of our Products in applications requiring a high degree of reliability (as exemplified below),
please contact and consult with a LAPIS Semiconductor representative: transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
8) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
9) LAPIS Semiconductor shall have no responsibility for any damages or injury arising from
non-compliance with the recommended usage conditions and specifications contained herein.
10) LAPIS Semiconductor has used reasonable care to ensure the accuracy of the information contained in
this document. However, LAPIS Semiconductor does not warrant that such information is error-free
and LAPIS Semiconductor shall have no responsibility for any damages arising from any inaccuracy or
misprint of such information.
11) Please use the Products in accordance with any applicable environmental laws and regulations, such
as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales
office. LAPIS Semiconductor shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
12) When providing our Products and technologies contained in this document to other countries, you
must abide by the procedures and provisions stipulated in all applicable export laws and regulations,
including without limitation the US Export Administration Regulations and the Foreign Exchange and
Foreign Trade Act.
13) This document, in part or in whole, may not be reprinted or reproduced without prior consent of LAPIS
Semiconductor.
Copyright 2015 LAPIS Semiconductor Co., Ltd.
8/8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement