Asko | D3530 | Use & care guide | Asko D3530 Use & care guide

Use & Care Guide
Dishwasher
ASKO D3530
ASKO D3630
Dear ASKO customer,
Congratulations on your excellent product choice and welcome to the Asko family. A global
family with its roots in Scandinavia.
Cleaning results, design, environmental impact on nature and home, user-friendliness, low
consumption of time, energy and water, a long life span, reliability.... Good appliances
should include all of these. And this is what we try to give you.
When you buy an ASKO product, we want you to feel assured that the inside is as good as
the outside and that the ethics and morals on which we built this machine are just as high as
the quality and performance you get from it. That is what Scandinavian quality is all about.
In order to get the best possible results from your machine and all its functions, please read
this Use and Care Guide before using the machine for the first time. And if you have any
questions, please do not hesitate to call us or contact us via our web site.
Best regards from Scandinavia and the people at Asko.
2
Contents
Contents
Page
3-4
Before using the dishwasher for the first
time
5
Read through the directions for use
Take care with certain materials
Check the door
Check water hardness level
Machines with water softener
Safety
General
Winter storage/Transport
Overfill Protection
Cleaning
Packaging materials
Scrapping
6
Child safety
7
Child lock
Certain machines have child safety
locks
Child-safe dishwashing
Protect your children! Dishwasher detergent is corrosive
Parts of the dishwasher
8
Technical Information
8
Baskets
9
Control panel
10
Dispenser
10
Basic course
11-17
Filling the baskets correctly
Dispensing dishwasher detergent
Selecting programs
Options
Delayed start
Loading the baskets
Drying
Express
Super rinse
Cool touch
13
Eco-dishwashing
14
Wash only full loads
Do not rinse before dishwashing
Choose environmentally-friendly dishwasher detergent
Connect to cold water supply
Special settings
Language
Child lock
Buzzer volume
Water hardness
Temperature unit
Machine information
Resetting the machine
15-16
Fragile dishes
Fragile decoration
Crystal/glass
Silver
Cutlery with glued handles
Wood
Aluminium
Plastic
Protect plastic goods
18
Standard program
19-20
Display
21
Cleaning
Coarse filter
Fine filter
The outflow pump
Spray arms
Door
22-23
3
Rinse aid
Pour in rinse aid
Select dosage
24
feet
C. Adjusting machines with adjustable
foot
Salt
25
Adjusting plinth
(Only if you have a kick-plate as an
accessory)
Pour in salt
Fault indications
26
Screw the machine into place
Troubleshooting
27-29
The dishes are not clean
Stains or a film on the china
The china has a whitish-blue sticky film
Stains on stainless steel or silver
Stains which remain after dishwashing.
Rattling sounds during dishwashing
The machine will not start
Water remains in the machine
Overfilling/leakage
Bad odour in the machine
Performance information
Fitting the strip seal (to the floor plinth
covering plate)
NB! Not all models
Adjusting water softener
35
Service & Guarantee
36
Own comments
37-38
Search words
39
Quick guide
40
30
Installation
31-34
Suggestions on positioning the
dishwasher
A. Built-in
B. Freestanding
C. Semi-freestanding
Connection to water supply
Connection to electricity
Drainage connection
Positioning the machine
A. Adjusting machines with six feet
(freestanding dishwasher)
B. Adjusting machines with three or four
4
Fitting fixed kick-plate
Before doing your first wash:
Read through the directions for
use
Read the directions of use before starting
to use your machine, especially the Safety,
Child Safety and Basic Course sections.
Take care with certain materials
Read the section ‘Fragile Dishes’ before
washing china with unglazed decoration
or other household goods made of plastic,
wood or crystal requiring careful treatment.
Check the water’s hardness
Phone your local Water Board to check the
water hardness in your area. This is important when dispensing dishwasher detergent
and rinse aid.
If you have a machine with a
water softener
Once you know the water hardness, adjust
the water softener, see Settings. Before
you start dishwashing, you must also fill
with salt, see Salt
Check the door
Check that the door of the dishwasher fits
properly: open the door a little and let it go.
Does it stay exactly where you released it?
If not, you should check the installation instructions or consult the installer.
5
Safety
General:
Winter storage/Transport
• Read and keep the directions for use!
• Installation of water, drainage and electricity must be carried out by a qualified professional.
• Do not use the dishwasher for any purposes other than those stated in these directions for use.
• Do not load the dishwasher door or the
dishwasher baskets with anything other
than dishes.
• Only use dishwasher detergent!
• Place knives and other sharp objects so
that they cannot cause injury to people or
damage the dishwasher.
• Damaged mains cables must only be replaced by an authorised professional.
• By installation of the unit the supply cord
shall be easily accessible.
• The door should not be left in the open
position since this could present a tripping
hazard.
• The appliance is not intended for use by
young children or infirm persons without
supervision.
Store the machine away from frost.
Avoid long journeys in extreme cold. Transport the machine in an upright position or lying on its back.
Never put dishes containing solvent residue
in the machine due to risk of explosion.
Neither may dishes containing ashes, wax
or lubricating grease be washed in the
dishwasher.
Overfill protection
The overfill protection starts pumping out
water and closes off the water intake if the
machine’s water level exceeds the normal
level. If the overfill protector starts up, shut
off the water supply and phone for service.
See “Fault indications” on page 26.
Cleaning
When cleaning around the edge of the door,
use only a slightly dampened cloth. Do not
use a spray bottle! Water can penetrate into
the lock and come into contact with the
electrical components.
Packaging materials
Sort at source in accordance with the recommendations of your local authority.
Scrapping
When the time comes for the machine to be
scrapped, it should immediately be rendered unusable. Remove the plug and cut
off the lead as short as possible.
Contact your refuse collection department
or your local authority for information on the
correct way to dispose of the machine!
The machine is manufactured and labelled
for recycling.
6
Child safety!
Child lock - Control Panel
To prevent children from starting the machine, a child lock can be activated.
Proceed as follows:
1. Switch off the machine at the main switch.
2. Hold in the Set button while pressing the
main switch
3. Press the Menu button until “Child lock”
appears in the display.
4. Select: On with the Set button.
5. Press the Start/stop button
6. Continue with the Menu button until you
get back to the main menu or press the Start/
stop button.
A key symbol appears in the display if you
have activated the child lock.
To deactivate the child lock temporarily
when starting the machine, press the Set
and Menu buttons simultaneously.
The child lock then comes back on automatically after 3 minutes.
To deactivate the child lock completely, follow the same instructions as when activating
it except that you select Off instead.
Child safety lock - Door
(not all models)
A child safety lock is fitted to prevent children
from opening the door of the dishwasher.
1. Activate the child safety lock by pressing
in the door latch and turning the screw slot
(up in the left hand corner) to the vertical position with a screwdriver.
2. To open the door, you must press the white
plastic latch (illustrated below) to the left at
the same time as pressing the catch upwards.
Reset by returning the screw slot to the horizontal position.
Closed
Open
Child-safe dishwashing
• Use the knife basket or knife stand for all
long/sharp items.
• Always close the door and start the
program immediately once the dishwasher
detergent has been added.
• Keep children away from the dishwasher
when it is open. There might be the remains
of dishwasher detergent present!
• Young children should be supervised to
ensure that they do not play with the
appliance.
Protect your children!
- Dishwasher detergent is corrosive!
WARNING: Dishwasher detergents are
strongly alkaline. They can be extremely
dangerous if swallowed. Avoid contact
with skin and eyes and keep children
away from the dishwasher when the door
is open.
Check that the detergent compartment is
empty after completion of the wash cycle.
Store dishwasher detergent and rinse aid out
of the reach of children! Should dishwasher
detergent be swallowed, immediately drink
one or two glasses of milk or water. Do not
attempt to induce vomiting. Contact a doctor!
Should dishwasher detergent come into contact with the eyes, rinse (for at least 15 minutes) with copious amounts of water.
7
Parts of the dishwasher*
1. Knife basket
2. Upper basket
3. Lamp
4. Spray arms
5. Lower basket
6. Cutlery basket
7. Rinse Aid Filling
8. Dishwasher detergent compartment
9. Main switch
10. Program panel
11. Filter
12. Type plate
* Details may differ
depending on model and market!
1
2
3
4
5
6
12
9
8
11
7
10
Technical information
Height
Width
Depth
Weight
Capacity**
Water pressure
Connection
Max output***
Accessories
* Details may differ depending on model and market!
**In accordance with standard, AS/NZS 2007.
***See type plate.
****Without fitted wooden door.
8
820-870mm
596 mm
550 mm****
48 kg/51 kg with water softener*
14 place settings
0.03-1.0 MPa (0.3–10 kp/cm2)
1-phase, 230 V, 50Hz 10/10A***
1900W***
Work surface, Side panels, Anti-tilt
The baskets*
Upper basket
1. Wine glass shelf
2. Folding glass support
3. Divided cup shelves
4. Knife stop
5. China guard
6. Folding plate stand
7. Wine glass shelf (not all models)
8. Folding hatch and handle
2
1
3
4
5
Lower basket
*Details may differ depending on the model and
market!
7
6
Cutlery basket
8
Knife basket
9
Control panel
2
1
4
3
SET
S TA R T
PROG
STOP
MENU
PC-UPGRADE
5
1. Program selector
2. Display window
3. Set
4. Start/stop
5. Menu
Dispenser
1
2
3
1. Compartment for main wash detergent
2. Compartment for pre-wash detergent
3. Refill indicator rinse aid (not all models)
4. Rinse aid cover
5. Detergent compartment cover
4
5
10
Basic Course
Below are step by step instructions to help
you achieve the best possible dishwashing
results.
Load the baskets correctly!
The cutlery basket has a folding hatch in the
middle for small items or narrow shafts, such
as electric whisks.
CAUTION
Your dishwasher has the Super Cleaning
System™,which means that you do not need
to rinse the dishes under running water before
putting them in the dishwasher.
Knives and other utensils with sharp points
must be loaded in the basket with their
points down or placed in a horizontal
position.
Simply remove large food particles and debris. Convenient and environmentally friendly!
Check that the spray arms are able to move
freely.
See Fragile Dishes, if you want to wash articles that may be fragile.
Place glasses, cups, bowls, side plates and
dishes in the upper basket, wine glasses
should be placed on the shelf with the wavy
edge, and knives in the knife stand if present.
NB!
Ensure that all soiled surfaces face inwards
or downwards! As depicted.
Detergent dosage
Place dinner plates, side plates, serving
dishes, saucepans and cutlery (in the cutlery
basket) in the lower basket. The folding rows
of extenders available in certain models can
easily be folded down to make room for large
plates, saucepans and pots.
Detergent should be dosed in accordance with
the water’s hardness level.
Follow the dosage instructions on the detergent package. If your machine is fitted with a
water softener, dose as for soft water.
Pour the dishwasher detergent into the dishwasher detergent compartment. There is
one compartment for pre-wash and one for
main wash, see Dispenser. Phone the dishwasher detergent manufacturer if you have
any questions regarding the detergent.
CAUTION!
Stand the cutlery with handles downward and
as spread out as possible. Ensure that spoons
are not resting inside each other.
Do not put cutlery made of different materials,
e.g. silver and stainless steel, in the same
compartment (risk of stains).
Protect your children!
- Dishwasher detergent is corrosive!
NB!
Only use dishwasher detergent
Detergent for washing by hand cannot be
used as the build-up of foam impedes the
machine’s performance.
11
Press the power main switch
and select program
Select a program by pressing the program
button one or more times until the required
program is displayed.
Auto wash
The dishwasher detects how soiled the
dishes are and adjusts water consumption
and temperature accordingly.
Fragile dishes
can be washed using the Delicate wash
program. Deselect the drying heat if you
want to be particularly careful. See also the
chapter on Fragile dishes.
Heavy wash
The Heavy Wash program should be used
for heavily soiled dishes, e.g. saucepans,
pots and gratin dishes. If there is still space
in the machine after loading such items, you
can add plates etc.
Quick wash
Select Quick Wash if the dishes are very
lightly soiled. This program is used for very
lightly soiled glass and china, e.g. coffee
cups.
Mixed wash
This dishwashing program is used for lightly
soiled dishes in the upper basket and
heavily soiled dishes in the lower basket.
Upper basket wash
If you only have cups and glasses in the upper basket which require washing, you can
use this program.
Lower basket wash
When you only want to wash plates and cutlery in the lower basket you can use the
lower basket wash.
Normal wash
Used for washing normally soiled dishes
such as plates, serving dishes, cups and
glasses, etc.
For washing normally soiled mixed loads
use the Normal wash program
with 65°C and normal drying .
To save more water and energy use 45°C
and economy drying.
12
Delicate wash
If the dishes are not heavily soiled, you can
select Delicate wash. This program is intended for glass and china which has just
been used and therefore does not need
such a powerful program.
Rinse & Hold
For rinsing the dishes while waiting for the
machine to be filled.
Rinse & Dry
The Rinse & Dry program comprises a
rinse with heat and drying. It is a suitable
program if you are planning to make jam
and want to rinse and warm previously
wash glass jars.
If you wish to use additional options,
continue to point 4. Otherwise you can
now start the machine, see point 5.
Options
Select options
To select options press the Menu button one
or more times until the desired option appears in the display window.
Delayed start
If you want the machine to start later, select the
delayed start option.
1. By pressing the Set button, you can select a
time delay of between 0.5 – 24 hours. The display window shows e.g. 1:30 and a clock
symbol will appear when you select a one and
a half hour time delay.
2. Confirm the selection by pressing the Menu
button and make further choices or press Start.
Loading the baskets
If you have a few dishes that need to be
washed, you can choose only to wash the upper or lower basket. It is also possible to select
a mixed wash with a few dishes in the upper
basket and a large amount in the lower basket.
1. Press the Set button to select ”All
baskets”, “Upper basket”, “Lower basket” or
“Mixed baskets”.
2. Confirm the selection by pressing the Menu
button and make further choices or press Start.
Temperature
The temperature can be changed in all
programs except the Auto wash, Rinse & Hold
and Rinse & Dry programs.
1. By pressing one or more times on the Set
button, you can advance to the desired temperature, from cold (incoming water temp.),
30°, 40°, 45 , 50°, 55°, 60°, 65°,70°, 75°C. In the
Delicate wash and Quick wash programs you
can only select temperatures up to 60°C.
2. Confirm the selection by pressing the Menu
button and make further choices or press Start.
Drying
You can select different drying time lengths depending on how dry you want your dishes to
be when the program has finished. The temperature can be selected in all programs except the Auto wash, Rinse & Hold and Rinse &
Dry programs.
1. By pressing the Set button you can select
‘Short drying’, ‘Eco drying’ (the drying symbol is shown with a wavy line) or ‘Normal drying’ (the drying symbol is shown in the form of
three wavy lines) .
2. Confirm the selection by pressing the Menu
button and make further choices or press Start.
Express
By selecting the Express option, the washing
time is reduced and the wash temperature lowered by 10°C. Cannot be used in the Quick
wash or Rinse & Hold programs.
1. Using the Set button you can select Express
Off (the E symbol goes out) or On (the E symbol comes on).
2. Confirm the selection by pressing the Menu
button and make further choices or press Start.
Super rinse
The Super rinse option adds two extra rinses. The
Super rinse option can be used in all programs except the Auto wash, Quick wash, Rinse & Hold
and Rinse & Dry programs.
1. Press the Set button to select Super rinse On
(the Super rinse symbol comes on) or Super
rinse Off (the Super rinse symbol goes out).
2. Confirm the selection by pressing the Menu button and make further choices or press Start.
Cool touch
If you want the dishes to be cooler for unloading, you can select the Cool Touch option.
1. Press the Set button to select Cool Touch
On (the Cool Touch symbol comes on) or
Cool Touch Off (the Cool Touch symbol goes
out).
2. Confirm your selection by pressing on the
Menu button and pressing Start.
13
Eco-dishwashing
Only wash with a full load
Do not rinse before dishwashing
Put off dishwashing until the machine is full,
and in this way you will save energy.
Thanks to the dishwasher’s Super Cleaning
System™ you do not need to rinse the
dishes under running water before loading
them into the machine.
Wash at a lower temperature
If the dishes are only lightly soiled you can
select a lower temperature.
Select option Eco drying
To save more energy, use Economy drying.
You will get a better drying result if you
leave the door slightly open after the end of
the program.
14
Choose environmentally-friendly
dishwasher detergent
Read environmental declarations on the
package!
Connect to coldwater
If the machine is connected to the cold water, the operating time will be longer, as it
takes longer to heat up the water. However,
the extended washing time means that it is
possible to operate a program with a lower
washing temperature and still achieve the
same results.
Special settings
Language, Child lock, Buzzer
volume, Water hardness,
Temperature, Machine
information, Reset machine to the
original settings
You will probably only need to adjust these
settings when the machine is new or if you
intend to adapt programs.
To get to the Special settings
1. When you have selected the program and
any option, press the Menu button until
‘Special settings’ appears in the display.
2. Press the Set button and you will now be
in special settings.
3. Press the Menu button until the desired
setting appears in the display.
Language
Using the Set button, select the language
you wish to use. Continue using the Menu
button and adjust other settings if required,
or press Start/stop if you want to start the
machine.
Child lock
Select ‘On’ with the Set button to activate
the child lock. Continue with the Menu button to make further adjustments or press
Start/Stop.
To temporarily deactivate the child lock
when starting the machine, press Set and
the Menu buttons simultaneously.
The child lock comes back on automatically
after three minutes.
Buzzer volume
If you wish, the machine will emit a buzzer
signal to let you know when it is finished.
Adjust the volume with the Set button. Select from 1, 2, 3, 4, 5, 6, 7, 8, 9 and 0 = Off.
Continue with the Menu button to make further adjustments or press Start/Stop.
Water hardness (machine with
water softener)
Phone your local water board to check the
water hardness in your area. The machine
is set for low water
No.
˚dH
˚fH
hardness on delivery.
0-5
0-9
0
Set the desired hard6-8
9-14
1
ness with the Set button. Select from 1, 2, 3, 2
9-11
15-20
4, 5, 6, 7, 8, 9 and 0 =
12-14
21-25
3
without water softener
15-19
26-34
4
as well as machines
20-24
35-43
5
with water softener and 6
25-29
44-52
low hardness.
30-39
53-70
7
Continue with the
40-49
71-88
8
Menu button to make
89+
50+
9
further adjustments or
press Start/Stop.
Temperature
Using the Set button, choose if the temperature is to be displayed in °C or °F. Continue
with the Menu button to make further adjustments or press Start/Stop.
15
Machine information
By pressing the Set button, you can see
how much water the machine used the last
time it was operated. You can also see how
many times it has been used since it was
new.
To exit Special settings
Press the Menu button or Start/Stop.
Resetting the machine
Switch off machine at the main switch. Hold
in the Program button while pressing the
main switch The machine will reset itself to
the original settings (with the exception of
water hardness and language).
16
Press Start and close the
door.
The dishwasher will now start. It manages
the entire wash automatically. Ensure that
the door is properly closed or the machine
will not start.
The display shows ‘Program started’. If the
door is open or not properly closed, ‘Close
door’ appears in the display.
After dishwashing
When the program is finished, End appears
next to the Start/Stop button. Should you
wish to disconnect the current completely,
just switch off at the main switch. Turn off the
water tap if the machine is not to be used for
an extended period, e.g. during holidays.
Advice!
Changing options
If you wish to change the program after having
started the machine, press the Start/Stop button for three seconds. Then select a new
program and press the Start/Stop button
again.
For even quicker drying, allow the door to
stand slightly ajar.
Do you want to load more
dishes?
Open the door slowly; the machine stops
automatically, put in the dishes, close the
door and the dishwasher will continue from
where it left off.
If the machine is switched off at
the main switch
(or in the event of a power cut) before the
washing program has been completed, the
interrupted program will continue when the
power comes back on.
NB!
If the power is switched off, or if the door
is open for more than 2 minutes during
drying, the program is interrupted.
17
Fragile dishes
A number of household goods are not suitable for machine washing. There can be
many reasons for this. Certain materials
cannot withstand intense heat, others can
be damaged by the dishwasher detergent.
Cutlery with glued handles
Certain types of adhesive cannot withstand
machine washing. In such cases the handles can come loose.
Wood
Fragile decoration
China with decoration on top of the glaze
(the article has a rough feel) should not be
machine washed.
Wooden articles should only be machine
washed if they are labelled as dishwasher
proof.
Aluminium
Crystal/glass
Place the articles so that they do not knock
together during the wash. Use the lowest
possible wash temperature and the shortest
possible program. No Drying Heat! Antique
and very fragile items should not be
machine washed.
Glass which is machine washed at high
temperatures can in time develop a grey
film which cannot be removed. Wash fine
glass at the lowest temperature and with a
low dosage of dishwasher detergent.
Silver
Silver and stainless items should not come
into contact with each other as the silver
can discolour.
18
Aluminium can be dulled by machine washing. However, good quality aluminium
saucepans can be machine washed, although a reduction in lustre should be expected.
Plastic
Certain types of plastic cannot withstand
the high temperature generated in machine
dishwashing.
To protect plastic articles
Select program with low temperature, 50°C
and Eco drying.
Standard program
Program procedure
Option
Program
Main
Temp.
PreDrying
wash Rinses
°C
wash
°C
0 / 1 40-60
Final
rinse
°C
Fan
2/3
60
X
Consumption
Time
Energy kWh Water
Min. (appr.)
Cold Warm
water water Litres
(20°C) (60°C)
Cold Warm
water water
(20°C) (60°C)
Auto wash
_
_
0,8-1,4 0,7-1,0 38245 115-185 95-160
Heavy wash
70
Normal
2
70
3
70
X
1,7
0,9
18
195
170
Normal wash
65
Normal
2
65
2
70
X
1,5
0,8
15
140
120
Normal wash *
45
Eco
-
45
2
45
X
0,6
0,3
13
100
85
Upper basket
45
Eco
-
45
2
45
X
0,6
0,3
10
90
75
Delicate wash
55
Eco
-
55
2
55
X
1,0
0,6
9
105
90
Quick wash
55
Eco
-
55
2
-
-
0,7
0,5
8
85
75
Quick wash
30
Eco
-
30
2
-
-
0,1
0,1
8
20
15
Rinse & dry
-
Normal
-
-
1
55
X
0,5
0,4
3
45
40
Rinse & hold
-
-
-
-
1
-
-
0,01
0,01
3
4
4
* Tested program for Standard AS/NZS 2007.1:2003
**All quoted times are only indicative, fluctuations may occur.
Due to water temperature, water pressure, variations in voltage etc.
Hot water connection approx. 60°C.
Cold water connection approx. 15°C.
19
Empty for printing reasons
20
The display
When you have selected program and
option, the display shows the length of time
the program took the last time it was used.
When you have started the machine, the
display window shows an approximate
duration.
This time can vary a little from one occasion
to another depending on the temperature of
the inlet water, the amount of dishes, the
ambient temperature, etc.
During the time the program is operating,
the remaining program time is shown in the
window. The remaining time is shown e.g.
as 1:02, which means that 1 hour and 2
minutes of the program remain.
NB!
During the first run of each program, the
remaining time display can be slightly misleading as the machine is estimating the
time. If the program takes longer than expected, it displays 1 minute until the
program is finished. There is no need to call
for service it is merely an indication that the
machine is working correctly.
21
Cleaning
Cleaning
The dishwasher’s inner container is made of
stainless steel and is kept clean through normal use. However, if you have calciferous
(hard) water, lime deposits can form in the
dishwasher. In this case, run a normal wash
program with two tablespoons of citric acid in
the dishwasher detergent compartment.
Coarse filter
Coarse
filter
Tubular
strainer
The coarse filter collects large food particles
which cannot get past the outflow pump. Lift
out and empty the coarse filter as necessary.
Don’t forget to replace it!
Fine filter
Fine
filter
After 300 dishwashing cycles, ‘Clean filter’ appears in the display (applies only to certain
models and markets).
1. The fine filter is removed by first turning the
tubular strainer of the filter anti-clockwise and
then lifting it straight up.
2. Clean with a dishwashing brush. Ensure
that the edges are properly sealed when replacing the fine filter.
The message is cancelled by pressing on
one of the buttons or the main switch.
Drain pump
The pump can be accessed from the inside
of the machine.
1. Always remove the plug from the wall
socket before you clean the pump.
2. Remove the coarse screen first by pressing together the two lugs and pulling the
screen upwards.
3. Now loosen the tubular part of the screen
by turning it anticlockwise and removing the
fine screen.
4. Finally remove the small adapter to the
left of the bottom drain.
5. It’s possible, by inserting your finger in
the hole, to turn the pump impeller and remove any blockage.
6. Refit the adapter and screens.
7. Insert the plug in the wall socket.
22
Pump
plug
If you still cannot start the machine and a
humming noise can be heard, then the overfilling protection has been activated.
• Shutoff the water
• Remove the plug from the wall socket
• Call Service
CAUTION!
Do not forget to replace the pump plug.
Spray arms
The holes and bearings can occasionally
become clogged.
1. Pull the lower spray arm straight up to release it.
2. Scrape away the debris with a needle or
similar. The spray arms also have holes on
the underside.
To release the upper spray arm, the upper
basket must be removed.
3. Pull out the basket and turn the basket
stop outwards on both rails (see picture).
The basket can now be removed.
4. Remove the upper spray arm in the same
way as the lower arm and clean it.
The door
When cleaning the edge around the door,
use only a slightly damp cloth, possibly with
a little detergent. Do not use a spray bottle
or similar around the door catch. This is to
ensure that water does not penetrate into
the door catch and come into contact with
the electrical components.
CAUTION!
Do not use a spray bottle or similar around
the door catch.
Tip!
In order to prevent bad odours in the dishwasher, clean the strips and corners with a
dish brush and low-lather detergent.
23
Rinse aid
Pour in rinse aid
Select dosage
Drying proceeds more quickly if you use
rinse aid.
The dispenser is usually set at 1= soft water. However, depending on the water
hardness you may need to change the
dosage.
Machines with indicator on the panel
When the rinse aid has run out and more is
needed, the rinse aid symbol on the panel
lights up*.
To fill with rinse aid:
1. Turn and lift up the cover of the rinse aid
compartment to the right of the dispenser.
This is where you top up and set the
amount of rinse aid to be dispensed in each
wash.
2. Carefully pour in rinse aid up to the knob
for dosage setting.
Alter dosage if required. Do not forget to
close the cover.
*NB!
After filling there may be a short delay
before the signal light goes out.
Machines with refill indicator
There is a refill indicator in the middle of the
dispenser (see picture). If the refill indicator
is totally black, there is sufficient rinse aid.
However, if the indicator has a more
transparent appearance, you need to top up
with rinse aid (see above).
Open
Refill
indicator
Closed
Rinse aid cover
Open by turning and lifting the
cover!
24
Open the rinse aid cover . Here you will
find the dispenser’s adjustment dial. Settings 1-6: the harder the water, the higher
the dosage.
When the water hardness exceeds 10-12
o
dH you should use rinse aid with citric
acid (acid rinse aid) if the machine does
not have a water softening filter. If the dishwasher has a water softening filter, dispense as for soft water.
Too much rinse aid can lead to the buildup of foam. If you have particularly soft water, you can dilute the rinse aid (1 part
rinse aid, 1 part water).
Too much rinse aid can cause streaks on
the dishes, while too little can result in water stains.
Salt
(applies to dishwashers with water softeners)
Add salt
Before using a dishwasher with a water
softening filter, you must fill the salt compartment with salt. Use coarse salt or special salt for dishwashers.
It is best to fill with salt when you are about
to do a wash, as the dishwasher needs to
be rinsed out immediately after filling.
Proceed as follows the first time:
1. First unscrew the cover as illustrated.
2. Place the funnel, which is supplied with
the dishwasher, into the compartment’s
filler hole.
3. First pour in approximately 1 litre of water.
Then fill the compartment with max 1.5 kg
salt.
4. Wipe away excess salt so that the cover
can be properly screwed into place.
5. Run a Normal wash program so that any
salt in the machine is rinsed away.
When the salt runs out, the salt symbol on
the display* lights up (this function is not
available on all machines). Unscrew the
cover and fill the compartment with salt.
Water is only needed on the first occasion!
Wipe clean and screw back in place. Run
a Normal wash program so that any salt is
rinsed away.
The indicator is not working
If the indicator is not working, this may be
because the float, which is positioned under the cover, has become stuck in salt
residue. The float can be reached through
the green arm located under the cover of
the salt compartment.
1. Move the float arm up and down.
2. When the float is freed, move the arm to
its lowest position.
Cover for the salt compartment
*NB!
After filling, there may be a short delay before the signal light goes out.
CAUTION!
Never pour dishwasher detergent into the
salt compartment. It will destroy the water
softener!
Models without a salt symbol in the display
show green in the salt compartment cover
when there is sufficient salt.
25
Fault indications
Display
Type of fault
Action
Overfilling
Too much water in the machine
Phone for service
Water inlet fault
Fault in the water inlet
Check that the tap is open
Inlet valve leakage Inlet valve leakage
Shut off the tap and phone for
service
Drainage fault
Blocked drain
See ‘Possible causes’ in chapter
Troubleshooting
Blocked filter
Clogged filter
Clean filters, see chapter
Cleaning
To remove the fault indications from the display, turn off the main switch and then turn it
back on again.
26
Troubleshooting
Problems
The dishes are not clean.
Possible causes
Action
• The spray arms are not
rotating.
• Lift off the arms and clean.
• Old dishwasher detergent.
NB! Detergent is a perishable.
• Avoid large packs.
• Incorrect dosage of
detergent.
• Dispense according to the
level of water hardness.
• Insufficiently powerful
dishwashing program.
• Select the Temperature
normal option or switch to a
more powerful program.
• Incorrect program chosen.
• Change to a more intensive program.
• Incorrect loading of the
dishwasher.
• Do not cover china with
large bowls or similar.
•Avoid placing very tall
glasses in the corners of
baskets.
Stains or a film on the
china.
• Glasses and cups have
tipped over during the wash.
• Load the china securely.
• Dishwasher fitted with
water softener is leaking
salt.
• Check that the cover of the
salt compartment is properly
screwed on. Otherwise
phone for Service.
• Incorrectly set water softener.
• See the chapter on water
softeners.
• Incorrectly set rinse aid
dispenser.
• See the chapter on rinse
aid.
• The salt compartment is
empty.
• Top up with salt.
• Phosphate-free detergent in
combination with hard water.
• Change detergent.
• Too high a temperature
and/or too much detergent
can cause etching on (crystal) glass. Unfortunately this
cannot be remedied, only
prevented!
• Wash (crystal) glass at a
low temperature and dispense dishwasher detergent
with care. Contact the dishwasher detergent
manufacturer.
27
Problems
Action
The china has a whitishblue sticky film.
• Too high dosage of rinse
aid.
• Reduce dosage. See the
chapter on rinse aid. If the
water is very soft, you could
try diluting the rinse aid (1
part rinse aid, 1 part water).
Stains on stainless steel
or silver.
• Certain food remnants
such as mustard, mayonnaise, lemon, vinegar, salt
and dressings can cause
stains on stainless steel if
allowed to remain for any
length of time. All stainless
steel can mark silver if
allowed to come into contact
during the dishwashing
process. Aluminium can
also cause stains on dishes.
• Rinse off food residue of
this type if you do not intend
to start the dishwasher
immediately.
• Seperate your cutlery into
the varians compartments in
the basket. Make sure silver
and stainless steel are not
together.
Stains which remain after
dishwashing.
• Lipstick and tea can be
difficult to remove.
• Change to a detergent with
bleach.
Rattling sound during
dishwashing.
• The dishes are not properly loaded or the spray
arms are not rotating.
• Check that the china is
loaded securely. Spin the
spray arms to make sure
that they rotate.
The machine will not start.
• You have forgotten to
switch on the main switch.
• Check
• The door is not properly
closed.
• Check
• A fuse has blown.
• Check
• The plug is not plugged in.
• Check
• The water tap is off.
• Check
To restart the machine,
press Start/stop for 3
seconds. Now select a
new programme and
press Start/stop.
28
Possible causes
• Overfilling/leakage
• A droning sound (drainage
1. Close the water tap.
Problems
Possible causes
Action
pump) can be heard from
the machine, this does not
stop when the power is
switched off using the main
power switch.
2. Pull out the plug.
3. Call a service engineer
• Obstruction in the drain
hose.
• Disconnect the drain hose
where it is connected to the
sink’s water trap. Check that
no debris has become stuck.
Is the cone-shaped part of
the pipe cut so that the
diameter is at least 16 mm?
• Kinks in the drain hose.
• Check that the hose is free
from kinks or sharp bends.
• The filters are clogged.
• Clean out the coarse filter,
the fine filter and the filter.
• Items in the drain pump.
• Clean out the drain pump.
See chapter on cleaning
Bad odour in the machine
• Dirt along the strips and in
corners
• Clean with a dish brush
and low-lather detergent.
The dishes are not
sufficiently dry
• Drying power too low.
The machine is not fully
loaded.
The rinse aid has run out or
the set dose is too low.
• Activate the Normal drying
option (not all models).
Put a full load in the
machine.
Replenish rinse aid or
increase the dose of rinse
aid.
Open the door slightly once
the program has finished.
Water remains in the
machine.
29
Performance information
Test dosage
Heavy wash/Normal wash
Main wash 25 gram Standard detergent.
Rinse aid dosage 3.
Energy labelling
Australia:
Dishwasher program:
Normal wash 45°C Eco drying
Program time:
Connection:
AS/NZS 2007
100 minutes.
Cold water
Test method noise measurement:
IEC-704-3
Example of dishwasher loading
AS/NZS 2007.1:2003
AS/NZS 2007.1:2003
Technical information
Height:
Width:
Weight:
Capacity:
Water pressure:
Connection:
Output:
*The weight can vary due to varying specifications.
30
820-870 mm
596 mm
48 kg*
51 kg with water softener*
14 IEC place settings
0.03-1.0 MPa
0.3-10 kp/cm2 (Bar)
3-100 N/cm2
See type plate
See type plate
Installation
Suggestions on positioning the
dishwasher
Built-in installation
The dishwasher can be built in, fully freestanding or semi-freestanding.
CAUTION!
570
20
550
820-870
Connection to electricity, water and drainage must be carried out by a suitably
qualified person.
820870
100150
570
600
A. Built-in
The dishwasher can be built in under a
work surface with a working height of 820870 mm. The width measurement must be
at least 600 mm. For more measurements
see picture.
B. Freestanding
A freestanding dishwasher must be fitted
with anti-tilt. This comprises two fastening
irons which are screwed into place as illustrated.
The dishwasher is then pushed in so that
the fastening irons grip onto the rear feet.
The dishwasher cannot now tilt in the
event a load is placed on the open door. If
the dishwasher is to be fully freestanding,
both side panels and the work top should
be fitted. These accessories can be purchased where you purchased the
dishwasher.
Tip!
A machine with side panels and a counter
top (freestanding) can, of course, also be
installed as a built-in unit.
0
-23
175
50
50-10
5
Freestanding installation
413
45
5-
47
5
600
CAUTION!
A fully freestanding dishwasher must be
fitted with anti-tilt.
NB!
The air outlet must not be blocked.
C. Semi-freestanding
If the dishwasher is positioned so that either side is visible, a side panel can be fitted.
These accessories can be purchased
where you purchased the dishwasher.
31
Connection to water supply
CAUTION!
There must be a shut-off tap on the water
supply pipe. The shut-off tap should be
positioned above the work surface or at
the front of the sink unit.
The lead must be disconnected or the
socket voltage-free while the work is carried out!
Connection to drainage
The water supply pipe has a connection
with a 1/2” or 3/4” internal thread depending on country.
When the drain hose is routed to a
connection nipple at the sink’s water trap
(see illustration 1), note that the hose must
be fastened level with the underside of the
sink unit – otherwise the dishwater from
the sink can run down into the dishwasher.
The drain hose is threaded onto a coneshaped connecting pipe at the sink unit’s
water trap. The cone-shaped pipe must be
cut to an internal diameter of at least 16
mm. For other alternative connections, see
illustrations 2 and 3.
When the installation is complete, the
shut-off tap should be opened to allow the
pressure to settle for a while and to check
that all connections are tight.
NB!
It is recommended that connection should
be to cold water.
The drain hose may be lengthened by a
maximum of 3 m (the total length of the
drain hose may not exceed 4.5 m). Any
connections and connecting pipes must
have an internal diameter of at least 16
mm. However, the drain hose should
ideally be replaced with a new hose
without joins.
Connection to electricity
A dishwasher fitted with a lead and plug
must be connected to an earthed socket.
Repairs and maintenance relating to
safety or performance must be carried out
by a qualified professional.
Technical data
See the type plate on the right hand side of
the door.
No part of the drain hose may be more than
950 mm above the bottom of the machine. The
hose must not be routed directly to the floor
drain or similar. In such cases, the hose can
act as a siphon and empty the dishwasher.
Connection to drainage
NB!
The hose must be fastened level with the
underside of the work surface.
Illustration 2
Illustration 3
Max 3 m
Illustration 1
The hose must always discharge at least 350
mm above the bottom of the machine.
Max 950 mm
Min 350 mm
32
Max 950 mm
Max 950 mm
Min 350 mm
Min 350 mm
Positioning the machine
A. Adjusting machines with 6 feet
(freestanding dishwasher)
1. Adjust the height of the dishwasher with
the four steel feet.
2. Lock the feet with the nuts.
NB! The dishwasher must not be allowed to
lean more than 5 mm.
Stålfötter
Steel feet
clockwise to raise or anti-clockwise to lower.
5. Check that the height of the machine corresponds to the height from the floor to the
underside of the work surface. Tighten the
locking nuts (locking nut) on the rear feet.
6. Push the dishwasher into place.
7. Finely adjust the front feet (the machine
may lean max. 5 mm) and tighten the locking nuts.
C. Adjusting machines with adjustable
foot
1. Start by measuring the height from the
floor to the underside of the work surface.
2. Install the sliding feet on the dishwasher.
3. After the steel feet have been adjusted,
screw down the two rubber feet tightly
against the floor.
The rubber feet now work as anti-tilt protection.
B. Adjusting machines with three or four
feet
1. Start by measuring the height from the
floor to the underside of the work top of
your kitchen bench.
2. Install the sliding feet on the dishwasher.
3. Measure the height from the floor to the
top edge of the dishwasher.
4. Tilt the dishwasher forward a fraction and
roughly adjust the rear foot by screwing the
set screw at the front clockwise to raise or
anti-clockwise to lower (illustrated below).
Use a broad screwdriver or a hexagonal
head screwdriver.
5. Adjust the front feet by turning them clockwise to raise or anti-clockwise to lower.
6. Check that the height of the machine corresponds to the height from the floor to the
underside of the work surface.
7. Push the dishwasher into place.
8. Finely adjust the feet (the machine may
lean max. 5 mm) and tighten the locking
nuts on the front feet.
3. Measure the height from the floor to the
top edge of the dishwasher.
4. Adjust all the feet by screwing them
33
Not all models
To prevent kinks, pull the drain hose and the
connecting pipe.
Fitting fixed kick-plate
Adjusting the plinth (Only if you
have kick-plate as accessory)
The dishwasher has two kick-plates (some
models).
The upper kick-plate should be used if the machine is to be 850 - 870 mm tall and the depth of
the plinth can be varied between 45 - 105 mm. The
lower one is used if the dishwasher is to be 820 845 mm tall with a plinth depth of between 50 105 mm. Attach the enclosed felt insulation to the
kick-plate (some models).
Set the correct plinth depth as follows:
1. Slide the grey catches towards each other and
pull out the holders as far as required. Slide in the
catches so that they lock the holders in place.
2. Hang the kick-plate onto the holders by inserting it into the grooves.
Screw the dishwasher into place
The enclosed plastic plugs are used for covering
the screw holes if the dishwasher is to be
screwed at the sides. After fixing check that the
front feet are in contact with the floor.
Fitting strip seal
(to the floorplinth’s covering plate)
Proceed as follows:
1. Remove the plastic plinth by gripping with
both hands under the plastic plinth (A), and
break outwards and upwards.
B
A
2. Undo the two screws on the covering plate
(B).
3. Glue the accompanying rubber strip (C) to
the underside of the covering plate (against
the floor).
4. Screw the covering plate back into place.
Adjust the covering plate so that the rubber
strip is just in contact with the floor.
x
x
C
5. Replace the plastic plinth
34
Setting water hardness (machines with water softener)
Before starting to use the dishwasher, you should set the correct water hardness. Phone
your local water board to ascertain the water hardness in your area. The machine is set for
low water hardness on delivery.
1. Turn on the dishwasher with the main switch.
2. Press the Menu button until ‘Special settings’ appears in the display.
3. Press the Set button. You are now in the special settings menu.
4. Press the Menu button until ‘Water Hardness’ appears on the display.
5. Set the desired hardness with the Set button. Select from 1, 2, 3, 4, 5, 6, 7, 8, 9 and 0 =
without water softener as well as machines with water softener and low hardness.
No.
˚dH
˚fH
0
0-5
0-9
1
6-8
9-14
2
9-11
15-20
3
12-14
21-25
4
15-19
26-34
5
20-24
35-43
6
25-29
44-52
7
30-39
53-70
8
40-49
71-88
9
50+
89+
6. Press the Menu button to confirm the setting.
35
Service & guarantee
36
Service
Guarantee
Before calling for service, check to see
whether the faults are due to something that
you can rectify yourself. See Trouble shooting pages 27-29.
For guarantee details, see the guarantee
card.
Own comments
37
Own comments
38
Search words
A
Q
Adding salt 25
Advice 17
After dishwashing 17
Quick Guide 36
Quick wash 12
C
Child-safe 7
Citric acid 22, 24
Cleaning 6, 22, 28
Connection 31, 32
Control panel 10
Crystal 5, 18
Cutlery basket 9
D
Delicate wash 12
Dishwasher detergent 6, 7, 11, 25
Display 21
Door 6, 17, 23
Drainage 22, 28, 31, 32
E
Environment 11, 14
F
Fault indications 6, 26
G
Guarantee 36
R
Recycling 6
Rinse & Hold 12
Rinse aid 5,10, 24, 26
S
Salt 5, 25, 26
Select Program 12, 14, 18, 40
Service 6, 26, 36
Settings 5, 15, 16
Spray arms 11, 23, 26, 40
Stains 26, 29
Standard program 19, 20
T
Temperature 13, 14, 15
Transport 6
U
Upper basket 8, 9, 12
W
Washing fragile items 12
Water 14, 24, 26, 31, 32
Winter storage 3, 6
H
Hardness level 5, 24
Heavy wash 12
I
Installation 31
K
Knife basket 8, 9
L
Loading baskets 11, 40
Lower basket 8, 9, 12
M
Main switch 8, 12, 17, 40
N
Normal Wash 12
P
Plastics 5, 18
Plinth 34
39
Quick Guide
1. Loading baskets
Remove large food particles and debris. There is no need to rinse thanks to the Super
Cleaning System™.
2. Dispensing dishwasher detergent
The detergent compartment has a small compartment for pre-wash and one for main
wash.
3. Ensure that the spray arms can rotate freely
4. Turn on the main switch
5. Select program and press start
For washing normally soiled mixed loads use the Normal wash program
with 65°C and normal drying .
To save more water and energy use 45°C and economy drying.
6. Close the door
Option
Program
Program procedure
Main
Temp.
PreDrying
wash Rinses
°C
wash
°C
0 / 1 40-60
Final
rinse
°C
Fan
2/3
60
X
Auto wash
_
_
Heavy wash
70
Normal
2
70
3
70
X
Normal wash
65
Normal
2
65
2
70
X
Normal wash *
45
Eco
-
45
2
45
X
Upper basket
45
Eco
-
45
2
45
X
Delicate wash
55
Eco
-
55
2
55
X
Quick wash
55
Eco
-
55
2
-
-
Quick wash
30
Eco
-
30
2
-
-
Rinse & dry
-
Normal
-
-
1
55
X
Rinse & hold
-
-
-
-
1
-
-
* Tes ted program for Standard AS/NZS 2007.1:2003
Art. No: 80 776 45 Rev. 02• We reserve the right to make changes. Disclaimer! Not all models contain all
the features listed in this manual.
Printed on environmentally-friendly paper which meets the demands of Friends of the Earth and the Swedish Society for Nature Conservation.
40
Download PDF

advertising