Metrology Products
Catalog 2008
Leica Geosystems
Metrology Products
Catalog 2008
Content
Leica Geosystems Absolute Trackers
06
Reflector Holders (Hubbs Machines & Manufacturing Inc)
36
Leica Geosystems Laser Tracker Service Contracts
46
Leica Geosystems Industrial Theodolites & Total Stations
50
Leica Geosystems TPS5000 Service Products
73
Notes for the Reader
Thank you for ordering a copy of the 2008 Leica Geosystems Metrology Products
Catalog. This catalog contains the complete range of products and accessories
available for Leica Geosystems Absolute Trackers and Leica Geosystems Industrial
Theodolites & Total Stations. Regardless of your particular application and the Leica
Geosystems Metrology Products you use, we have you covered. Easy-to-interpret
diagrams and product illustrations & descriptions let you quickly find what you need
for the measurement task at hand.
Most items feature a description and a picture. Some items show an example of how
to use them in a typical configuration and what benefit they bring.
All of our products and accessories offer the same top-notch, no-nonsense design
and quality you expect from Leica Geosystems.
If you have any questions about our products or accessories, please contact your
authorized sales person to receive competent guidance and make an appropriate
purchasing decision.
Sincerely,
Your Leica Geosystems Metrology Products Team
Content Leica Geosystems Absolute Trackers
Basic Instruments
Leica Geosystems Absolute Tracker Leica Geosystems Absolute Tracker Controllers
14
14
Portable CMM
Leica T-Probe Accessories Styli & Extensions
Leica T-Mac
Leica T-Cam with Accessories
Leica T-Scan with Accessories
15
16
17
19
20
21
Leica Geosystems Absolute Tracker Accessories
Laser Tracker Stands
Cables & UPS
Remote Control Equipment
Levelling Equipment
Overview Camera Equipment
Meteo Station & Accessories
Reflectors
Leica Reflector Holders
Compensation and Field Check Tools
Shipping Container and Measuring Cart
Reflector Holders (Hubbs Machines & Manufacturing Inc)
Legacy Program
Leica Geosystems Laser Tracker Service Contracts
22
23
24
25
26
27
28
32
33
35
36
44
46
Leica Absolute Tracker Configuration for Standard Tracking Systems
4 02
4 05
4 04
A T C o n tro lle r 90 0
USB
1 11
3 21
3 26
7 04
7 05
3 22
3 27
4 11
Reflectors
501 - 510
Reflector Holders and Accessories 601 - 640
1 03
3 52
3 14
3 12
31 5
6 52
3 16
Pos.
10
Leica Absolute Tracker Configuration for Probing Systems
4 02
4 05
4 11
4 04
3 43
A T C o n tro lle r 90 0
USB
1 11
3 21
3 26
7 04
3 22
3 27
7 05
7 01
2 05
20 9
2 04
2 08
11
Pos.
Reflectors
501 - 510
Reflector Holders and Accessories 601 - 640
Leica T-Probe II and Accessories 201 - 219
2 30
2 31
2 36
66 7
66 8
1 02
1 01
21 0
3 52
3 14
3 12
3 15
23 5
3 16
2 00
2 07
22 5
12
Leica Absolute Tracker Configuration for Scanning Systems
4 02
4 05
4 11
4 04
3 43
A T C o n tro lle r 90 0
USB
7 04
7 01
1 11
3 21
3 22
3 26
3 27
7 05
7 03
13
2 31
Pos.
Reflectors
501 - 510
Reflector Holders and Accessories 601 - 640
2 30
2 36
1 01
1 02
3 52
3 14
3 12
3 15
2 35
3 16
AT
90
1B
AT
90
1M
R
AT
90
1LR
Basic Instruments
Po
s.
14
Leica Geosystems Absolute Tracker
576300
Leica AT901-LR
Absolute Tracker 901-Long Range with Absolute Interferometer (AIFM)
(Interferometer = 40 m, ADM 40 m), AT Controller 900, AT Quick Release
Mount, shipping container and emScon on-board compensation and
open interface software is included. The AT901-LR is compatible with
Leica T-Cam LR and other Leica T-Products.
576301
Leica AT901-MR
Absolute Tracker 901-Mid Range with Absolute Interferometer (AIFM)
(Interferometer = 25 m, ADM 9 m), AT Controller 900, AT Quick Release
Mount, shipping container and emScon on-board compensation and
open interface software is included. The Leica AT901-MR is compatible
with Leica T-Cam MR and other Leica T-Products.
576302
Leica AT901-B
Absolute Tracker 901-Basic with Absolute Interferometer (AIFM)
(Interferometer = 40 m, ADM 40 m), AT Controller 900, AT Quick Release
Mount, shipping container and emScon on-board compensation and
open interface software is included.
Leica Geosystems Absolute Tracker Controller
576310
AT Controller 900
The AT Absolute Tracker Controller 900 is compatible with all Leica
Geosystems Laser Tracker types except Smart310, LT300/500.
For older sensor types the ATC900 will support 3D operations
(reflector) only. If Leica T-Products support is required for systems
other than from the new AT sensor family then please contact
service.ims@hexagonmetrology.com
std.
std.
std.
Portable CMM Accessories
LR
190
AT
R
M
190
AT
B
190
AT
s.
Po
200
opt.
opt.
L = Set S = System
E = Spare part
std. = Standard delivery opt. = Option
576169
Leica T-Probe
2nd generation Leica T-Probe is a portable CMM solution for armless
and wireless probing. The handy and light weight measurement probe
with configurable function buttons allows measurements in small and
large measurement volumes with minimal preparation time. The measurement range of the Leica T-Probe is up to 15m in all directions. The
Leica T-Probe comes with ruby ball stylus d=6mm, Leica T-Probe stylus
adaptor, stylus compensation tool, 20m cable, power supply for battery,
spare battery and transportation case.
15
AT
90
1B
AT
90
1M
R
AT
90
1LR
Portable CMM Accessories
Po
s.
16
Accessoires
576231
Leica T-Probe Styli Kit
Recommended stylus kit for Leica T-Probe. Comes with 5 different
styli (Scribe stylus r=0.1mm - M2, Ruby ball stylus d=3mm - M5, Ruby
ball stylus d=6mm - M5, Ceramic hemispherical stylus d=0.5in - M4,
Ceramic hemispherical stylus d=1.0in - M4), 3 styli extensions (100mm
- M5 - carbon fibre - stem d=20mm, 200mm - M5 - carbon fibre - stem
d=20mm, 40mm - M5 - carbon - stem d=11mm), 2 Leica T-Probe stylus
adaptors - M5 with precision quick release for self identification, stylus
tools for M2-M3/M4/M5 threaded styli, stylus adaptor M5-M4 and Leica
T-Probe styli kit case.
202
opt.
opt.
576211
Leica T-Probe Styli Kit Case for standard configuration (empty)
202
opt.
opt.
576212
Leica T-Probe stylus adaptor – M5
Precision quick release adaptor for Leica T-Probe styli to remove and
attach styli without re-calibration. The ­stylus adaptor has built in intelligence to support stylus self identification.
203
opt.
opt.
575947
Leica T-Probe Holder
Optional Leica T-Probe holder for save positioning the Leica T-Probe on
workstations and measurements surfaces such as car bodies.
204
opt.
opt
575972
575973
575983
Cable Leica T-Probe, 10m
Cable Leica T-Probe, 20m
Leica T-Probe replacement battery
205
opt.
opt
206
opt.
opt
207
opt.
opt
575987
Magnetic Leica T-Probe Stylus Compensation Kit
Optional for save positioning on magnetic materials to perform stylus
compensations.
208
opt.
opt.
576247
T-Probe Stylus Shank Compensation Tool
This tool is an accessory for the articles 575987 Magnetic T-Probe Stylus Compensation Kit and 738261 Leica T-Probe Stylus compensation Kit
Stylus Compensation Kit and 738261 Leica T-Probe Stylus Compensation
Kit
opt.
opt.
Portable CMM Accessories
LR
190
AT
R
M
190
AT
B
190
AT
s.
Po
209
opt.
opt.
575980
Leica T-Probe Compensation Kit
For on-site compensation of Leica T-Probe. It comes with Leica T-Probe
reference frame, wedge tool, tripod screw and light duty magnetic holder for 0.5 Red Ring Reflectors. Requires additional 0.5 Red Ring Reflector
(corner cube) for compensation process. The Leica T-Probe compensation kit fits into the Leica T-Cam compensation kit shipping container.
Styli and Extensions
opt.
576213
576214
576215
576216
576217
576218
Stylus
Stylus
Stylus
Stylus
Stylus
Stylus
opt.
opt.
576219
Scribe Stylus r=0.1mm - M2
215
opt.
opt.
576220
Ruby Ball Stylus d=3mm - M5
215
opt.
opt.
576221
Ruby Ball Stylus d=6mm - M5
576248
Cylindrical Stylus 22.5mm, d=3mm - M2
576222
Edge Stylus - M5
Comes with edge sphere 0.5”, magnetic stylus M5 and compensation
sphere 0.5”
210
opt.
opt.
210
opt.
opt.
210
opt.
opt.
210
opt.
opt.
210
opt.
opt.
210
opt.
215
216
opt.
opt.
L = Set S = System
E = Spare part
std. = Standard delivery opt. = Option
extension
extension
extension
extension
extension
extension
100mm - M5 - carbon fibre - stem d=20mm
200mm - M5 - carbon fibre - stem d=20mm
400mm - M5 - carbon fibre - stem d=20mm
600mm - M5 - carbon fibre, stem Ø 20mm
40mm - M5 - carbon, stem Ø 11mm
100mm - M5 - carbon, stem Ø 11mm
17
AT
90
1B
AT
90
1M
R
AT
90
1LR
Portable CMM Accessories
Po
s.
18
576223
576224
576225
Stylus Tool for M2 and M3 threaded styli
Stylus Tool for M4 threaded styli
Stylus Tool for M5 threaded styli
217
opt.
opt.
217
opt.
opt.
217
opt.
opt.
576226
Stylus Adaptor M5 - M2
217
opt.
opt.
576227
Stylus Adaptor M5 - M4
217
opt.
opt.
576228
Stylus Adaptor M4 - M5
217
opt.
opt.
576229
576230
Ceramic Hemispherical Stylus d=0.5in - M4
Ceramic Hemispherical Stylus d=1.0in - M4
218
opt.
opt.
218
opt.
opt.
Portable CMM Accessories
LR
190
AT
R
M
190
AT
B
190
AT
s.
Po
Leica T-Mac
225
opt.
opt.
L = Set S = System
E = Spare part
std. = Standard delivery opt. = Option
576400
TMC30-B
Leica T-Mac basic is a sensor specifically developed to extend the
product offerings utilizing the Leica Geosystems 6DOF technology.
Leica T-Mac can be used in combination with robots and large
machines, especially in high-accuracy positioning applications. Leica TMac has can be mounted on a robot or other machines, and its housing
already has 4 reflector nests included. These reflector positions can be
used to establish a local coordinate system for object orientation or
robot alignment. Optionally, a tool exchange interface from Sandvik can
be adapted.
19
AT
90
1B
AT
90
1M
R
AT
90
1LR
Portable CMM Accessories
Po
s.
20
Leica T-Cam with Accessories
576320
Leica T-Cam LR
Leica T-Cam Long Range for up to 15 meter measurement range.
It comes with transportation case and cleaning set. Compatible with
AT901-LR and LTD800/840.
576321
Leica T-Cam MR
Leica T-Cam Mid Range for up to 9m measurement range. It comes
with transportation case and cleaning set. Compatible with Leica
AT901-MR and LTD700/709.
opt.
opt.
575979
Leica T-Cam Compensation Kit
For on-site compensation of Leica T-Cam to Tracker. Requires additional 0.5" Red-Ring Reflector (corner cube) for compensation process. It is
recommended to have at least one compensation kit per factory.
223
opt.
opt.
576975
Overview Camera for Leica T-Cam
Optional overview camera that can be mounted to Leica T-Cam.
It enables save and convenient reflector lock via video image.
224
opt.
opt.
Portable CMM Accessories
LR
190
AT
R
M
190
AT
B
190
AT
s.
Po
Leica T-Scan with Accessories
250
opt.
opt.
575930
Leica T-Scan TS50
Laser Scanner complete
- Sensor head with integrated reflectors and connection cable
- Transportation Box
- Scanner Calibration Files (FD 3.5”)
- Scanner Certifcate
- Scanner Cover
Laser Power Supply Unit
- Separate unit providing power to the Sensor Unit via cables
Leica T-Scan Controller
Leica T-Scan Interface Kit
- Laser Cable (Rack to Laser Power Supply Unit)
- Scanner Cable (Rack to Leica T-Scan Controller)
- Laser Control Cable (Laser Power Supply Unit - Leica T-Scan Controller)
Laser Power Supply Cable (24 Volt)
- Trigger Cable (LTC plus to Leica T-Scan Controller)
- LED Cable (Rack to Leica T-Scan Controller)
- Leica T-Scan Cable (Rack to LTC plus [Probe])
- Sub-D Cable (9-pin, 2 m)
- Cross Over Ethernet Cable 1m
- Cross Over Ethernet Cable 2 m
Leica T-Scan Collect Software
Data collection with Leica T-Scan, data collection with Reflector and
Leica T-Probe, 3D-Viewer, 2D-Viewer, Profile Viewer, Online-visualisation
of measurements, Visualisation of points, meshes or shaded meshes
Saving and loading projects, Import and Export 3D-data (points, STL),
3D-transformation of coordinate system alignments, 3D-Filter (Gauss
und edge conserving)masking and cutting of 3D-data, 3D-Clipping,
Global surface matching of point clouds, 3D-Data reduction (curvature
depending or based on volume), Mesh creation, Manipulation of meshes
Programmeable and automateable data post processing, Calculation of
single and series profiles, Menu to verify accuracy, Menu for calibration,
Configurable 2D-gradient filter and optional visualisation of hand scanner.
251
opt.
opt.
576044
High-speed computer for fast data collection and powerful graphical
visualization (Pentium 4 Processor with 3.0 GHz, 2 DDRAM 512 MB,
Quadro4 Graphics Card)
252
opt.
opt.
576047
Reference Sphere with certificate Ø 100mm
Reference sphere with 100 mm diameter for field check and alignment
checks of the Leica T-Scan system.
253
opt.
opt.
576048
Reference Sphere Bar with certificate, 2m
Reference bar with 5 spheres at 40cm distance. Each sphere to sphere
distance is traceable certified. Diffuse sphere surfaces are special made
for scanner measurements.
L = Set S = System
E = Spare part
std. = Standard delivery opt. = Option
This accessory is no regular stock item and will be available on customer
request only. The typical delivery time is > 3 months.
21
AT
90
1B
AT
90
1M
R
AT
90
1LR
Portable CMM Accessories
Po
s.
22
Leica Geosystems Laser Tracker Accessories
Following options are compatible with all above listed Leica Geosystems Laser Trackers unless explicitly mentioned
Laser Tracker Stands
Worlds lightest heavy duty tripod featuring:
- Vibration free stand
- Light for easy transportation
- Large wheels for easy movements
- Can be taken apart for transport
- Quick release “from minutes to seconds”
576337
AT Stand Extension
Base stand extension for AT Absolute Trackers. The AT Stand Extension
does not include 576338 AT Quick Release Mount, which is required.
The AT Stand Extension can be extended either with 575998 Stand
extension, 380mm (15”) or 575999 Stand extension, 180mm (7”).
opt.
opt.
opt.
575997
Leica Geosystems Laser Tracker Stand
The Leica Geosystems Laser Tracker stand is equipped with three levelling screws and shock absorbing wheels.
313
opt.
opt.
opt.
576338
AT Quick Release Mount
AT Quick release for mounting a AT Absolute Tracker on 576337 AT
Stand Extension, 576336 AT Mounting Plate or any other compatible
instrument stand with 3.5”x8 thread adapter.
opt.
opt.
opt.
576336
AT Mounting Plate
Allows to mount the AT Absolute Trackers onto machine beds. The
AT Mounting Plate does not include 576338 AT Quick Release Mount
which is required.
opt.
opt.
opt.
576339
AT Magnetic Mount
Allows to mount the AT Absolute Trackers onto a magnetic surface. The
AT Magnetic Mount does not include 576338 AT Quick Release Mount
and 576336 AT Mounting Plate, which is required.
opt.
opt.
opt.
Portable CMM Accessories
LR
190
AT
R
M
190
AT
B
190
AT
s.
Po
Cables and UPS
Industrial cables and Network adapters for LAN as well as UPS units
opt.
opt.
opt.
576330
Motor Cable to Leica Geosystems Laser Trackers 10m (33’)
Compatible with any Leica Geosystems Laser Tracker type
opt.
opt.
opt.
576331
Sensor Cable to Leica Geosystems Laser Trackers 10m (33’)
Compatible with any Leica Geosystems Laser Tracker type
opt.
opt.
opt.
576332
Motor cable to Leica Geosystems Laser Trackers, 5m (16’)
Compatible with any Leica Geosystems Laser Tracker type
opt.
opt.
opt.
576333
Sensor Cable to Leica Geosystems Laser Trackers, 5m (16’)
Compatible with any Leica Geosystems Laser Tracker type
opt.
opt.
opt.
575256
Elbow Plug set, for motor- and sensor cable, comprising:
opt.
opt.
opt.
575247
Elbow Plug, for motor cable, 16 pin
opt.
opt.
opt.
575248
Elbow Plug, for sensor cable, 54 pin
331
opt.
opt.
opt.
575899
LAN Cable RJ-45, 5m
LAN cable to connenct Laser Tracker with application computer
332
opt.
opt.
opt.
576141
Desktop PC LAN Adapter (10/100 Fast Ethernet PCI adapter, RJ-45 port)
Full-duplex operation at both 10 Mbps and 100 Mbps. Comply with PCI
Local Bus reversion 2.0/2.1 specification. Support all popular PC network
operating systems. Plug and Play Installation, jumper-less board with
software configuration program. Single shield RJ45 connector for using
at either speed (Category 3, 4, or 5 UTP cable for 10 Mbps Operation,
and Category 5 UTP cable for 100 Mbps Operation). Compliant with
IEEE802.3 10BASE-T, IEEE 802.3u 100BASE-TX standards. FCC, CE Certification.
333
opt.
opt.
opt.
576232
Wireless Network Adapter for Laptop/Desktop
WiFi USB Adapter connects to 802.11b/g networks and hotspots.
This article is used together with article 576233 to establish a network
between application computer (Laptop/Desktop) and Laser Tracker
(emScon Server). It comes with: USB Adapter for Laptop/Desktop, cradle
and instruction sheet. This network configuration (576232/576233) has
been tested by Leica Geosystems and ensures system performance.
334
opt.
opt.
opt.
576233
Wireless Network Adapter for emScon Server
WiFi certified Access Point creates high-performance 802.11g wireless
network. This article is used together with article 576232 to establish
a network between application computer (Laptop/Desktop) and Leica
Geosystems Laser Tracker (emScon Server). It comes with: Access Point
for emScon Server, power adapter and instruction sheet. This network
configuration (576232/576233) has been tested by Leica Geosystems
and ensures system performance.
328
L = Set S = System
E = Spare part
std. = Standard delivery opt. = Option
23
AT
90
1B
AT
90
1M
R
AT
90
1LR
Portable CMM Accessories
Po
s.
24
575992
Uninterrupted Power Supply UPS (220 Volt)
Power VA/W: 1100/700
Input Voltage Tolerance: 160V/294V adjustable to 150V/294V via
supplied UPS-Driver software
Frequency: 50/60 HZ Auto-select
Output voltage on battery power: 230V (adjustable to 200/220/240V
vial supplied UPS-Driver software
Dimensions: 44x438x499mm
Weight: 16kg
344
opt.
opt.
opt.
575993
Uninterrupted Power Supply UPS (110 Volt)
Power VA/W: 1100/700
Input Voltage Tolerance: 92V/138V adjustable to 80V/153V via supplied
UPS-Driver software
Frequency: 50/60 HZ Auto-select
Output voltage on battery power: 120V (adjustable to 100/120/127V
vial supplied UPS-Driver software
Dimensions: 1.73x17.2x19.6 inch
Weight: 35.2 lb
345
opt.
opt.
opt.
Remote Control Equipment
575757
Wireless RF Control
Approved for: Australia, EU, Czech Republic, Hungary, Malaysia, Mexico,
New Zealand, Norway, Philippines, Poland, Russia, Switzerland, Thailand, Hong Kong
(Radio Frequency: 40MHz, Range: 30m, plugs into a USB port on a Windows computer)
Incl. CD with drivers and templates for Axyz, Metrolog XG and emScon.
PCDIMS templates are provide with PCDIMS software CD.
341
opt.
opt.
opt.
575965
Wireless IR Control
Wireless Infra-Red Control unit for USB port.
Compatible with: Windows 98 SE, 2000, ME, XP or higher.
Incl. CD with drivers and templates for Axyz, Metrolog XG and emScon.
343
opt.
opt.
opt.
Portable CMM Accessories
LR
190
AT
R
M
190
AT
B
190
AT
s.
Po
Levelling Equipment
High-performing level
For measurements against gravity and monitoring stability
Ready to measure to specs within minutes (no need for 0-point adjustment)
Backward compatibility (except SMART310)
opt.
opt.
opt.
576000
NIVEL230, inclination sensor for Laser Tracker with RS232 interface;
supports gravity based coordinate measurements, with Producer Inspection. Certificate M NIVEL230.
opt.
opt.
opt.
576334
AT Nivel Adapter Kit
The AT Nivel adapter kit is used to mount a 576000 Nivel 230 inclination
sensor onto the Leica Geosystems AT Laser Tracker to determine the tilt
components and to monitor the station.
opt.
opt.
opt.
802905
Cable, 1.5m (Lemo - Lemo)
To connect Leica Geosystems Laser Tracker with NIVEL20 or NIVEL230.
351
353
L = Set S = System
E = Spare part
std. = Standard delivery opt. = Option
25
AT
90
1B
AT
90
1M
R
AT
90
1LR
Portable CMM Accessories
Po
s.
26
Overview Camera Equipment
The unique overview camera allows a quick location of reflectors.
While in joystick mode you direct the laser tracker to the point of
interest.
Thus it becomes an essential accessory for remotely controlled
laser trackers.
446000
Video Cable 10m, BNC / BNC, (AT Controller to 575 785 View finder
video board)
361
opt.
opt.
opt.
575882
Video Grabber DX for Desktop (Axyz only), comprising:
1x 730735 Pixel View Model No. PC-CX881P (PCI)
1x 727502 Adapter Plug
1x 446000 Video cable (10m)
1x 734412 Video Grabber Hardware Installation sheet for Axyz Users.
For Windows 2000 & Windows XP
366
opt.
opt.
opt.
575883
Video Grabber DX for Notebook (Axyz only), comprising:
1x 734694 Notebook Grabber (USB)
1x 727502 Adapter plug
1x 446000 Video Cable (10m)
1x 734412 Video Grabber Hardware Installation sheet for Axyz Users.
For Windows 2000 & Windows XP
366
opt.
opt.
opt.
575986
Overview Camera for Leica Geosystems Laser Tracker
The optional black/white overview camera mounts on top of the Leica
Geosystems Laser Tracker. It enables safe and convenient reflector lock
via video image. The camera functionality is supported during the various measuring modes of LTD840, LTD706, LTD709, LTD640, AT901-B,
AT901-MR, AT901-LR Laser Trackers, which have the absolute distance
meter built in.
365
opt.
opt.
opt.
Portable CMM Accessories
LR
190
AT
R
M
190
AT
B
190
AT
s.
Po
Meteo Station & Accessories
The most precise sensor to monitor and correct the atmospheric conditions. It is an essential accessory for any precision measurements.
opt.
opt.
opt.
576342
AT MeteoStation
The AT MeteoStation has a built-in temperature, humidity and pressure
measuring unit. Two external temperature sensors (air temperature/object temperature) can be attached optionally. The meteo station gets
connected to the AT Controller via a USB cable. The meteo data is accessible via the emScon Interface. The product consists of:
AT MeteoStation, 3m USB cable, HW Manual and Producer Certificate.
Parameters:
Pressure: min. 500hPa, max. 1100hPa
Temperature (int. and ext.): min. -10°C, max.+60°C
Rel. Humidity: min. 0%, max. 95%
Accuracy:
Pressure: ± 1.0 hPa
Temperature (int. and ext.) ± 0.3°C
Humidity: ± 5%
opt.
opt.
opt.
576343
External NTC Temperature Sensor, 2m
The external NTC temperature sensor is an accessory for the AT MeteoStation. The temperature sensor in configured with a 2m cable. It can be
used as air- and/or object- sensor.
Parameter:
Temperature range: -20…+50°C
Accuracy:
Temperature: ± 0.1°C
opt.
opt.
opt.
576344
External NTC Temperature Sensor, 10m
The external NTC temperature sensor is an accessory for the AT MeteoStation. The temperature sensor in configured with a 10m cable. It can
be used as air and/or object sensor.
Parameter:
Temperature range: -20 to +50°C
Accuracy:
Temperature: ± 0.1°C
opt.
opt.
opt.
576345
USB Cable, 3m
The USB cable connects the AT MeteoStation with the AT Controller unit.
opt.
opt.
opt.
576346
AT MeteoStation Calibration Certificate
Calibration (DIN ISO 17025) for the AT MeteoStation together with 2
external sensors (if available).
The certificate issues:
- Rel. Humidity: 50%
- Temperature (int./ext.): +20°C (ext.: Possible only when external
sensors are available)
- Pressure: 700mb to 1200mb
opt.
opt.
opt.
576347
AT MeteoStation Producer Certificate
Producer Certificate (DIN ISO 9001) for the AT MeteoStation together
with 2 external sensors (if available).
The certificate issues:
- Rel. Humidity: 53%
- Temperature (int./ext.): +20°C (ext.: Possible only when external
sensors are available)
- Pressure: actual atmosphere
L = Set S = System
E = Spare part
std. = Standard delivery opt. = Option
27
AT
90
1B
AT
90
1M
R
AT
90
1LR
Portable CMM Accessories
Po
s.
28
Reflectors
The widest range of offering for most various applications. All reflectors are optimized for use with Leica Geosystems Laser Tracker:
Each Corner Cube reflector is coated to assure the world ’s best ADM
specifications.
Applied for:
- Standard applications
- Dynamic and static measurements
576244
Break Resistant Reflector 1.5” (BRR)
Break Resistant Reflector with collar, protection cover for optic and
certificate, in wooden box
Radius: 19.05 mm ± 0.0025 mm (0.7500 in ± 0.00010 in)
Centring of optics: < ± 0.010 mm (< ± 0.0004 in)
Shape ball: < ± 0.0015 mm (< ± 0.00006 in)
Acceptance angle: ≤ ± 30°, No limitation due to collar
Ball material: Stainless steel, surface-hardened, magnetic
Weight: 195 g (6.88 oz)
501
opt.
opt.
opt.
576245
Break Resistant Reflector 0.5” (BRR)
Break Resistant Reflector with collar, protection cover for optic and
certificate, in wooden box
Radius: 6.35 mm ± 0.0025 mm (0.2500 in ± 0.00010 in)
Centring of optics: < ± 0.010 mm (< ± 0.0004 in)
Shape ball: < ± 0.0015 mm (< ± 0.00006 in)
Acceptance angle: ≤ ± 30°, No limitation due to collar
Ball material: Stainless steel, surface-hardened, magnetic
Weight: 7 g (0.25 oz)
501
opt.
opt.
opt.
575784
Red-Ring Reflector (RRR) 1.5”, ball with hardened steel surface
Corner cube reflector with removable ring, protection cover for optic
and certificate, in wooden box
Radius 0.75” (19.05mm) ±0.0025mm,
Centring of optics ±0.006mm
Shape ball ±0.0015mm
Acceptance angle ≤ ±30°
Weight 170g.
501
opt.
opt.
opt.
576241
Red-Ring Reflector 1.5” (RRR), 2-pack
2 Corner Cube reflectors with removable ring, protection cover for optic
and certificate, in wooden box.
Radius: 19.05 mm ± 0.0025 mm (0.7500 in ± 0.00010 in)
Centring of optics: < ± 0.006 mm (< ± 0.00024 in)
Shape ball: < ± 0.0015 mm (< ± 0.00006 in)
Acceptance angle: ≤ ± 30°, No limitation due to ring
Ball material: Stainless steel, surface-hardened, magnetic
Weight: 170 g (6.00 oz)
501
opt.
opt.
opt.
Portable CMM Accessories
LR
190
AT
R
M
190
AT
B
190
AT
s.
Po
501
opt.
opt.
opt.
576242
Red-Ring Reflector 1.5” (RRR), 5-pack
5 Corner Cube reflectors with removable ring, protection cover for optic
and certificate, in storage case.
Radius: 19.05 mm ± 0.0025 mm (0.7500 in ± 0.00010 in)
Centring of optics: < ± 0.006 mm (< ± 0.00024 in)
Shape ball: < ± 0.0015 mm (< ± 0.00006 in)
Acceptance angle: ≤ ± 30°, No limitation due to ring
Ball material: Stainless steel, surface-hardened, magnetic
Weight: 170 g (6.00 oz)
501
opt.
opt.
opt.
576243
Red-Ring Reflector 1.5” (RRR), 10-pack
10 Corner Cube reflectors with removable ring, protection cover for optic
and certificate, in storage case.
Radius: 19.05 mm ± 0.0025 mm (0.7500 in ± 0.00010 in)
Centring of optics: < ± 0.006 mm (< ± 0.00024 in)
Shape ball: < ± 0.0015 mm (< ± 0.00006 in)
Acceptance angle: ≤ ± 30°, No limitation due to ring
Ball material: Stainless steel, surface-hardened, magnetic
Weight: 170 g (6.00 oz)
Applied for:
- Standard applications
- Dynamic and static measurements
502
opt.
opt.
opt.
575739
Red-Ring Reflector (RRR) 0.5”, ball with hardened steel surface
Corner cube reflector with removable ring, protection cover for optic and
certificate, in wooden box
Radius 0.25” (6.35mm) ±0.0025mm,
Centring of optics ±0.006mm
Shape ball ±0.0015mm
Acceptance angle ≤ ± 30°
Weight 5g.
502
opt.
opt.
opt.
576238
Red-Ring Reflector 0.5” (RRR), 2-pack
2 Corner Cube reflectors with removable ring, protection cover for optic
and certificate, in wooden box
Radius: 6.35 mm ± 0.0025 mm (0.2500 in ± 0.00010 in)
Centring of optics: < ± 0.006 mm (< ± 0.00024 in)
Shape ball: < ± 0.0015 mm (< ± 0.00006 in)
Acceptance angle: ≤ ± 30°, No limitation due to ring
Ball material: Stainless steel, surface-hardened, magnetic
Weight: 6 g (0.21 oz)
502
opt.
opt.
opt.
576239
Red-Ring Reflector 0.5” (RRR), 5-pack
5 Corner Cube reflectors with removable ring, protection cover for optic
and certificate, in wooden box
Radius: 6.35 mm ± 0.0025 mm (0.2500 in ± 0.00010 in)
Centring of optics: < ± 0.006 mm (< ± 0.00024 in)
Shape ball: < ± 0.0015 mm (< ± 0.00006 in)
Acceptance angle: ≤ ± 30°, No limitation due to ring
Ball material: Stainless steel, surface-hardened, magnetic
Weight: 6 g (0.21 oz)
L = Set S = System
E = Spare part
std. = Standard delivery opt. = Option
29
AT
90
1B
AT
90
1M
R
AT
90
1LR
Portable CMM Accessories
Po
s.
30
576240
Red-Ring Reflector 0.5” (RRR), 10-pack
10 Corner Cube reflectors with removable ring, protection cover for
optic and certificate, in wooden box
Radius: 6.35 mm ± 0.0025 mm (0.2500 in ± 0.00010 in)
Centring of optics: < ± 0.006 mm (< ± 0.00024 in)
Shape ball: < ± 0.0015 mm (< ± 0.00006 in)
Acceptance angle: ≤ ± 30°, No limitation due to ring
Ball material: Stainless steel, surface-hardened, magnetic
Weight: 6 g (0.21 oz)
Applied for:
- Standard applications
- Automated inspection
502
opt.
opt.
opt.
576234
Tooling Ball Reflector 0.5” (TBR)
Tooling ball glass prism reflector with removable ring, protection cover
for optic and certificate, in wooden box
Radius ball: 6.35 mm: ± 0.004 mm (0.2500 in ± 0.00016 in)
Centring of optics: < ± 0.01 mm (< ± 0.00039 in)
Shape ball: < ± 0.003 mm (< ± 0.00012 in)
Acceptance angle: with ring: ≤ ± 22°, without ring: ≤ ± 50°
Ball material: Stainless steel, surface-hardened, magnetic
Weight: 7 g (0.25 oz)
503
opt.
opt.
opt.
576235
Tooling Ball Reflector 0.5” (TBR), 5-pack
5 Tooling ball glass prism reflector with removable ring, protection
cover for optic and certificate, in wooden box
Radius ball: 6.35 mm: ± 0.004 mm (0.2500 in ± 0.00016 in)
Centring of optics: < ± 0.01 mm (< ± 0.00039 in)
Shape ball: < ± 0.003 mm (< ± 0.00012 in)
Acceptance angle: with ring: ≤ ± 22°, without ring: ≤ ± 50°
Ball material: Stainless steel, surface-hardened, magnetic
Weight: 7 g (0.25 oz)
503
opt.
opt.
opt.
576236
Tooling Ball Reflector 0.5” (TBR), 10-pack
10 Tooling ball glass prism reflector with removable ring, protection
cover for optic and certificate, in wooden box
Radius ball: 6.35 mm: ± 0.004 mm (0.2500 in ± 0.00016 in)
Centring of optics: < ± 0.01 mm (< ± 0.00039 in)
Shape ball: < ± 0.003 mm (< ± 0.00012 in)
Acceptance angle: with ring: ≤ ± 22°, without ring: ≤ ± 50°
Ball material: Stainless steel, surface-hardened, magnetic
Weight: 7 g (0.25 oz)
Applied for:
- Monitoring fixed installations
- Repeatability tests
- Relative measurements
- Deformation measurements
503
opt.
opt.
opt.
Portable CMM Accessories
LR
190
AT
R
M
190
AT
B
190
AT
s.
Po
505
opt.
opt.
opt.
575848
Reflectors for fixed installation (RFI) 0.5”, set of 5 pcs.,
ball with anodized aluminium surface
ø 0.5” (12.07mm)
Max. acceptance angle ±50°
Weight 5g.
505
opt.
opt.
opt.
576246
Reflector for Fixed Installations 0.5” (RFI), 10-pack
10 Tooling ball glass prism reflector in wooden box.
Radius ball: 6.35 mm (0.2500 in)
Centring of optics: not applicable
Shape ball: not applicable
Acceptance angle: ≤ ± 50°
Ball material: Anodized aluminum, non-magnetic
Weight: 3 g (0.11 oz)
Applied for:
- Robot and machine operations
- Dynamic and static measurements
506
opt.
opt.
opt.
573510
Cateye Reflector (CER), ball with hardened steel surface,
ø 75mm (2.9528”), ±0.05mm
Ball shape ±0.01mm
Centring of optics ±0.01mm
Max. acceptance angle ±60°
Weight 730g
Applied for:
- Robot and machine operations
- Dynamic and static measurements
507
opt.
opt.
opt.
575847
Surface Reflector Kit including:
- Surface Reflector with lanyard
- Pin Point Stylus
- 3 mm Ruby Ball Stylus
- Edge Stylus
- Initialisation sphere
- Manual
L = Set S = System
E = Spare part
std. = Standard delivery opt. = Option
31
AT
90
1B
AT
90
1M
R
AT
90
1LR
Portable CMM Accessories
Po
s.
32
Reflectors Holders
575778
Starter bolt for tooling ball reflector 0.5”
640
opt.
opt.
opt.
575854
Sphere fit tool for Cateye reflector
640
opt.
opt.
opt.
576142
Light Duty Magnetic Holder for tooling ball reflectors 0.5”
opt.
opt.
opt.
Portable CMM Accessories
LR
190
AT
R
M
190
AT
B
190
AT
s.
Po
Compensation and Field Check Tools
A regular field check plus compensation will keep your system in a
perfect condition and will provide a performance to specification.
651
opt.
opt.
opt.
575479
Compensation Set for 75mm Reflectors (Cateye), comprising:
575415 Precision ball bar, motorized,
2x 803728 Magnetic Reflector Support
575090 Adapter to ball bar
652
opt.
opt.
opt.
575480
Compensation Set for 1.5” Red Ring Reflectors (Corner cube)
Comprising:
575415 Precision ball bar, motorized,
2x 804 011 Magnetic reflector Support,
575090 Adapter to ball bar
653
opt.
opt.
opt.
575415
Precision Ball Bar
Motorized, with counter weight, without reflector support
654
opt.
opt.
opt.
575090
Adapter to Ball Bar for Tripods with 5/8” Thread
Allows to mount a ball bar and a magnetic reflector carrier on a tripod,
(ball bar and reflector carrier are not included).
655
opt.
opt.
opt.
575836
IFM Distance Tool
To re-determine the birdbath distance for TBR and 1.5” CCR reflectors,
12mm bore holes for reflector supports (supports not included).
656
opt.
opt.
opt.
575837
Tripod Adapter
To be used for various alignment or compensation measurements.
Thread for tripod 5/8”. Bore hole 12mm (supports not included)
- Tripod reflector holder for consistent reference point
- Drawn to scale
- Steel with black oxide finish
661
opt.
opt.
opt.
575484
Aluminium Tripod AT28
With adjustable centre column. Robust, well-established tripod for
general use and 5/8” thread. Suitable for Total Stations, Theodolites and
Laser Tracker field check equipment. Instrument height from 1.4 –2.8m
(4.6 – 9.2 ft), weight 12kg (26.4 lb)
662
opt.
opt.
opt.
575483
Aluminium Tripod AT21
With adjustable centre column. Robust, well-established tripod for
general use and 5/8” thread. Suitable for Total Stations, Theodolites and
Laser Tracker field check equipment. Instrument height from 1.4 –2.1m
(4.6 – 6.9 ft), weight 11kg (24.2 lb)
L = Set S = System
E = Spare part
std. = Standard delivery opt. = Option
33
AT
90
1B
AT
90
1M
R
AT
90
1LR
Portable CMM Accessories
Po
s.
34
574550
Reference Tool Invar
665
opt.
opt.
opt.
804011
Magnetic Reflector Holder for reflectors in spherical housings
ø 1.5” with bolt hole for 575497
666
opt.
opt.
opt.
803728
Magnetic Reflector Holder for reflectors in spherical housings
ø 75mm with bolt hole for 575497 and 575599
666
opt.
opt.
opt.
opt.
opt.
opt.
opt.
opt.
opt.
- Tripod reflector holder for consistent reference point
- Drawn to scale
- Steel with black oxide finish
576401
Mirror Tool to measure distances between 2 points with Laser Tracker
using interferometer only. This basic set includes 2 holders with
reflector holders for 0.5” and 1.5” (2 units each version 576073 and
576096) This tool can be used also to generate nominal distance values for the planned VDI/VDE standard.
576402
Reflector Mount
Can be mounted on a tripod or fix installed at a stabil location to
establish nominal distances for comparison measurements. To support
0.5” and 1.5” CCR’s magnetic reflector holders version 576073 and
576096 are recommended.
Portable CMM Accessories
LR
190
AT
R
M
190
AT
B
190
AT
s.
Po
Shipping Container and Measuring Cart
Both carts and shipping container will provide best storage and
transport facilities.
701
703
opt.
opt.
opt.
opt.
575995
Measurement Cart
rack mounting for a fix installation of controllers,UPS and high speed
computer. This cart can be used like the regular measuring cart and in
addition it can be reconfigured to shuttle cart.
L =1.20m, W = 0.70m, H = 1.10m
opt.
opt.
576046
Leica T-Scan Measuring Cart (rack-size)
Small 19” rack with wheels, 18 HE height to mount:
LTC plus, Cover plate for cable connection, Laser power supply, Leica
T-Scan Controller, High speed computer and UPS.
L=0.59m, W=0.755m, H=0.845m
opt.
opt.
576335
Shipping Case for Stand and AT Stand Extension
The case can be equipped with 575997 Leica Geosystems LaserTracker
Stand, 576337 AT Stand Extension and the Leica Geosystems Laser
Tracker Motor & Sensor and Cables (5m or 10m)
opt.
opt.
opt.
576348
Rack Mount Light Duty Case
The case is a light duty rolling rack unit. It has dual lids and rollerblade
type wheels. The rack mount light duty case is versatile and can be
equipped with e.g. a AT Controller900 or T-Scan Controller or any other
computer equipment, which fits the 4 unit height and 19” width rack
system.
Exterior Depth: 22.75 in / 57.785 cm
Exterior Width: 21.50 in / 54.610 cm
Exterior Height: 10.75 in / 27.305 cm
Rack Space Units: 4 U
Rack Depth (Rail to Lid): 19.00 in / 48.260 cm
Rack Depth (Rail to Rail): 16.75 in / 42.545 cm
Lid Depth: 2.25 in / 5.715 cm
Product Weight: 17 lb / 7.711 kg
L = Set S = System
E = Spare part
std. = Standard delivery opt. = Option
35
AT
90
1B
AT
90
1M
R
AT
90
1LR
Portable CMM Accessories
Po
s.
36
Leica Geosystems Laser Tracker 1.5” Reflector Holders
577011
Reflector Holder 1.5”, offset 24mm, shank Ø 6mm, body Ø 25.4mm,
stainless steel
opt.
opt.
opt.
577002
Reflector Holder 1.5”, offset 24mm, shank Ø 8mm, body Ø 25.4mm,
stainless steel
opt.
opt.
opt.
577003
Reflector Holder 1.5”, offset 24mm, shank Ø 12mm, body Ø 25.4mm,
stainless steel
opt.
opt.
opt.
577101
Reflector Holder 1.5”, offset 25mm, shank Ø 6mm, body Ø 25.4mm,
stainless steel
opt.
opt.
opt.
577102
Reflector Holder 1.5”, offset 25mm, shank Ø 8mm, body Ø 25.4mm,
stainless steel
opt.
opt.
opt.
577103
Reflector Holder 1.5”, offset 25mm, shank Ø 10mm, body Ø 25.4mm,
stainless steel
opt.
opt.
opt.
577104
Reflector Holder 1.5”, offset 25mm, shank Ø 12mm, body Ø 25.4mm,
stainless steel
opt.
opt.
opt.
577120
Reflector Holder 1.5”, offset 1.0000”, shank Ø 0.2500”, body Ø 1.000”,
stainless steel
opt.
opt.
opt.
1.000"(25.4MM)
3 Point Nest
1.500 Sphere
(Reference)
A
B
Portable CMM Accessories
37
LR
190
AT
R
M
190
AT
B
190
AT
s.
Po
opt.
opt.
opt.
577125
Reflector Holder 1.5”, offset 24mm, shankless, body Ø 40.64mm,
stainless steel
opt.
opt.
opt.
577126
Reflector Holder 1.5”, offset 25mm, shankless, body Ø 40.64mm,
stainless steel
opt.
opt.
opt.
577127
Reflector Holder 1.5”, offset 1.0000”, shankless, body Ø 1.6000”,
stainless steel
opt.
opt.
opt.
577128
Reflector Holder 1.5”, offset 24mm, shankless, body Ø 40.64mm,
magnetic base, stainless steel
opt.
opt.
opt.
577129
Reflector Holder 1.5”, offset 25mm, shankless, body Ø 40.64mm,
magnetic base, stainless steel
opt.
opt.
opt.
577130
Reflector Holder 1.5”, offset 1.0000”, shankless, body Ø 1.6000”,
magnetic base, stainless steel
3 Point Nest
1.6000 Diameter
(40.64 MM)
1.5000 Sphere
(Reference)
A
opt.
opt.
opt.
577135
Edge Reflector Holder 1.5”, offset 24mm, stainless steel
opt.
opt.
opt.
577136
Edge Reflector Holder 1.5”, offset 25mm, stainless steel
opt.
opt.
opt.
577137
Edge Reflector Holder 1.5”, offset 1.0000”, stainless steel
Reflector Holders
Centerline of Precision (3) Point
Nest in Line with Datum "A" W/in
+/-.0005
Please send orders to:
Hubbs Machine & Manufacturing Inc.
6282 Rocky Grove
P.O. Box 540
Datum "A"
Cedar Hill, Missouri 63016-0540
USA
Tel.: +1 636 285 43 88
Offset
L = Set S = System
E = Spare part
std. = Standard delivery opt. = Option
1.5000 Diameter Sphere
(Reference)
Magnet
Fax: +1 636 285 59 70
tonya@hubbsmachine.com
577140
Drift Nest 1.5”, offset 1.0000”, aluminum
AT
90
1B
AT
90
1M
R
AT
90
1LR
Portable CMM Accessories
Po
s.
38
opt.
opt.
opt.
opt.
opt.
opt.
opt.
opt.
opt.
3 Point Nest
1.5000 Sphere
(Reference)
1.000
( Reference)
Magnet
45 Degree Chamfer
576102
Foundation Reflector Holder 1.5”
3 Point Nest
1.500 Diameter
(Reference)
Magnet
Removable Brass Cap with O-Ring Seal
Medium Knurl
576134
Tripod Reflector Holder 1.5”
3 Point Nest
1.5000 Sphere
(Reference)
Magnet
1/4" Hole
5/8-11
Portable CMM Accessories
39
LR
190
AT
R
M
190
AT
B
190
AT
s.
Po
opt.
opt.
opt.
576104
Leica Lanyard Set 1 (full)
opt.
opt.
opt.
576105
Leica Lanyard Set 2 (partial)
Leica Geosystems Laser Tracker 0.5” Reflector Holders
opt.
opt.
opt.
577201
Reflector Holder 0.5”, offset 10mm, shank Ø 5mm,
body Ø 12.7mm, stainless steel
opt.
opt.
opt.
577202
Reflector Holder 0.5”, offset 10mm, shank Ø 6mm,
body Ø 12.7mm, stainless steel
opt.
opt.
opt.
577203
Reflector Holder 0.5”, offset 10mm, shank Ø 8mm,
body Ø 12.7mm, stainless steel
opt.
opt.
opt.
577204
Reflector Holder 0.5”, offset 10mm, shank Ø 10mm,
body Ø 0.75”, stainless steel
opt.
opt.
opt.
577205
Reflector Holder 0.5”, offset 10mm, shank Ø 12mm,
body Ø 0.75”, stainless steel
opt.
opt.
opt.
577206
Reflector Holder 0.5”, offset 12mm, shank Ø 6mm,
body Ø 12.7mm, stainless steel
opt.
opt.
opt.
577207
Reflector Holder 0.5”, offset 12mm, shank Ø 8mm,
body Ø 12.7mm, stainless steel
opt.
opt.
opt.
577208
Reflector Holder 0.5”, offset 12mm, shank Ø 12mm,
body Ø 0.75”, stainless steel
opt.
opt.
opt.
577209
Reflector Holder 0.5”, offset 0.3125mm, shank Ø 0.2500”,
body Ø 0.5000”, stainless steel
opt.
opt.
opt.
577210
Reflector Holder 0.5”, offset 0.5000mm, shank Ø 0.2500”,
body Ø 0.5000”, stainless steel
Reflector Holders
C
Please send orders to:
Hubbs Machine & Manufacturing Inc.
6282 Rocky Grove
P.O. Box 540
.500 Sphere
(Reference)
A
Cedar Hill, Missouri 63016-0540
USA
Tel.: +1 636 285 43 88
Fax: +1 636 285 59 70
tonya@hubbsmachine.com
L = Set S = System
E = Spare part
std. = Standard delivery opt. = Option
B
AT
90
1B
AT
90
1M
R
AT
90
1LR
Portable CMM Accessories
Po
s.
40
577220
Reflector Holder 0.5”, offset 10mm, body Ø 12.7mm,
shankless, magnetic base, stainless steel
opt.
opt.
opt.
577221
Reflector Holder 0.5”, Offset 12mm, body Ø 12.7mm,
shankless, magnetic base, stainless steel
opt.
opt.
opt.
577222
Reflector Holder 0.5”, offset 0.5000”, body Ø 0.5000”,
shankless, magnetic base, stainless steel
opt.
opt.
opt.
opt.
opt.
opt.
opt.
opt.
opt.
.5000+/-.0005"
(12.7 MM)
.500 Diameter Sphere
(Reference) on Centerline
within +/-.0005"
A
Magnets
577230
Reflector Holder 0.5” Drift Nest, offset 0.5000”, stainless steel
.500 Diameter Sphere
(Reference)
.500 +/-.010
577235
Magnet
Reflector Holder 0.5” Target Corner, offset 0.5000”, stainless steel
Datum "A"
.5000 Diameter Sphere
(Reference)
.5000 +/-.0005
Magnet
Magnet
Sphere Reference in line
with datum "A" w/in +/-.0005
Portable CMM Accessories
41
LR
190
AT
R
M
190
AT
B
190
AT
s.
Po
opt.
opt.
opt.
577240
Magnetic Holder with zero thickness for 0.5” reflectors,
steel black oxide finish
.500 Sphere
(Reference)
Magnet
opt.
opt.
opt.
576131
Double Vector for TBR, shank Ø 0.2500”, steel black oxide finish
.500 Sphere
(Reference)
2 Places
1.5625
.3125
opt.
opt.
opt.
576052
Heavy Duty Magnetic Holder for TBR
.500 Sphere
(Reference)
Reflector Holders
Please send orders to:
Hubbs Machine & Manufacturing Inc.
6282 Rocky Grove
P.O. Box 540
Cedar Hill, Missouri 63016-0540
USA
Tel.: +1 636 285 43 88
Fax: +1 636 285 59 70
tonya@hubbsmachine.com
L = Set S = System
E = Spare part
std. = Standard delivery opt. = Option
AT
90
1B
AT
90
1M
R
AT
90
1LR
Portable CMM Accessories
Po
s.
42
Miscellaneous
576055
Heavy Duty Magnetic Reflector Holder Adaptor, aluminum
opt.
opt.
opt.
opt.
opt.
opt.
opt.
opt.
opt.
Slip Fit For
12 MM
36 MM
Magnet
576122
Foundation Target Insert
Medium Knurl
1.0" OD
Air Hole
.2500 Hole
Slip Fit Cap
Brass
577250
Leica Geosystems Laser Tracker – Imperial Reflector Holder Kit
consisting of:
- 6 x Reflector Holder 0.5” Drift Nest, offset 0.5000”, stainless steel
- 1 x Reflector Holder 0.5” Target Corner, offset 0.5000”, stainless steel
- 1 x Reflector Holder 0.5”, offset 0.5000mm, shank Ø 0.2500”,
body Ø 0.5000”, stainless steel
- 1 x Double Vector for TBR, shank Ø 0.2500”, steel black oxide finish
- 1 x Reflector Holder 1.5”, offset 1.0000”, shank Ø 0.2500”,
body Ø 1.000”, stainless steel
- 1 x Reflector Holder 1.5”, offset 1.0000”, shankless, body Ø 1.6000”,
stainless steel
- 1 x Edge Reflector Holder 1.5”, offset 1.0000”, stainless steel
- 2 x Tripod Reflector Holder 1.5”
- 6 x Drift Nest 1.5”, offset 1.0000”, aluminum
Portable CMM Accessories
43
LR
190
AT
R
M
190
AT
B
190
AT
s.
Po
opt.
opt.
opt.
577251
Leica Geosystems Laser Tracker – Metric Reflector Holder Kit
consisting of:
- 6 x Reflector Holder 0.5” Drift Nest, offset 0.5000”, stainless steel
- 1 x Reflector Holder 0.5”, offset 10mm, shank Ø 6mm,
body Ø 12.7mm, stainless steel
- 1 x Reflector Holder 0.5”, offset 10mm, shank Ø 8mm,
body Ø 12.7mm, stainless steel
- 1 x Reflector Holder 0.5”, offset 10mm, shank Ø 12mm,
body Ø 0.75”, stainless steel
- 1 x Reflector Holder 0.5”, offset 12mm, shank Ø 6mm,
body Ø 12.7mm, stainless steel
- 1 x Reflector Holder 0.5”, offset 12mm, shank Ø 8mm,
body Ø 12.7mm, stainless steel
- 1 x Reflector Holder 0.5”, offset 12mm, shank Ø 12mm,
body Ø 0.75”, stainless steel
- 1 x Reflector Holder 1.5”, offset 25mm, shank Ø 6mm,
body Ø 25.4mm, stainless steel
- 1 x Reflector Holder 1.5”, offset 25mm, shank Ø 8mm,
body Ø 25.4mm, stainless steel
- 1 x Reflector Holder 1.5”, offset 25mm, shank Ø 12mm,
body Ø 25.4mm, stainless steel
- 1 x Reflector Holder 1.5”, offset 25mm, shankless,
body Ø 40.64mm, stainless steel
- 1 x Edge Reflector Holder 1.5”, offset 25mm, stainless steel
- 2 x Tripod Reflector Holder 1.5”
- 6 x Drift Nest 1.5”, offset 1.0000”, aluminum
opt.
opt.
opt.
576106
Leica Stand Adaptor Rings
Clearanc Bolt
Holes for Leica
Laser Tracker Head
3 1/2-8
Thread
Tapped Holes for
Leica tracker Base
Reflector Holders
Please send orders to:
Hubbs Machine & Manufacturing Inc.
6282 Rocky Grove
P.O. Box 540
Cedar Hill, Missouri 63016-0540
USA
Tel.: +1 636 285 43 88
Fax: +1 636 285 59 70
tonya@hubbsmachine.com
L = Set S = System
E = Spare part
std. = Standard delivery opt. = Option
LT
D6
40
LT
D7
06
/7
09
LT
D8
40
Legacy Program
Po
s.
44
For Leica Geosystems Laser Tracker 600/640/700/706/709/800/840 Series
Laser Tracker Stands
575998
Stand extension, 380mm (15”)
Stand extension for Laser Tracker sensor
311
opt.
opt.
opt.
575999
Stand extension, 180mm (7”)
Stand extension for Leica Geosystems Laser Tracker sensor
312
opt.
opt.
opt.
575246
Mounting plate for Leica Geosystems Laser Tracker
Allows to mount the sensor unit onto machine beds etc., requires part
number 575256
314
opt.
opt.
opt.
Leica T-Cam Accessories
575924
Cable Leica T-Cam, 10m
225
opt.
opt.
575849
Cable Leica T-Cam, 5m
Spare or replacement cable for Leica T-Cam
225
opt.
opt.
575926
Sync Package for LTCbase / plus
Required for Leica T-Cam but also enables synchronization and trigger
with external devices. Required for upgrades and for Laser Tracker’s delivered before Jan 2005 only.
222
std.
std.
352
opt.
opt.
Levelling Equipment
576026
NIVEL Adapter Kit
The NIVEL adapter kit is used to mount all NIVEL inclination sensor onto
the Leica Geosystems Laser Tracker, compatible with LT(D)640, LTD706,
LTD709, LTD840
opt.
s.
Po
40
D8
LT
09
/7
06
D7
LT
40
D6
LT
Legacy Program
For Leica Geosystems Laser Tracker 600/640700/706/709/800/840 Series
Meteo Station
opt.
opt.
opt.
5000 090
HM30 Factory Certification
Factory Certification for HM30, together with combo-sensor. Certificate issued for humidity, temperature and pressure to the producer’s standards,
performed by Revue Thommen in Switzerland. To be ordered at your local
service centre (or check local possibilities).
Shipping Container and Measuring Cart
704
opt.
702
opt.
opt.
575939
Shipping container for Leica Geosystems Laser Tracker accessories
For Leica Geosystems Laser Tracker with LTC base/plus as
LTD600, 700, 800
opt.
opt.
576045
Optional upgrade of measuring cart 575937 to use with Leica T-Scan system. The measuring cart 575937have to be upgraded when it will be used
with Leica T-Scan system
- Ventilator to cool the cart
- Cover plate with integrated plugs
- Adapter to mount Laser Power Supply Unit
L = Set S = System
E = Spare part
std. = Standard delivery opt. = Option
45
AT
90
1B
AT
90
1M
R
AT
90
1LR
Leica Geosystems Laser Tracker Service Contracts
Po
s.
46
89129
5 Year Warranty Program for Leica Geosystems Laser Tracker
• A yearly scheduled inspection
• Traceable re-certification to national standard
• All parts and labor for repairs (excluding all cables application computers,
software and other peripheral hardware)
89131
5 Year Warranty Program for Leica T-Cam and Leica T-Probe
Comprises:
• A yearly scheduled inspection
• Traceable re-certification to national standard
• All parts and labor for repairs (excluding all cables application computers,
software and other peripheral hardware)
5301 030
89117
opt.
opt.
opt.
opt.
5 Year Warranty Program for Leica T-Scan, Leica T-Cam and Leica T-Probe
Comprises:
• A yearly scheduled inspection
• Traceable re-certification to national standard
• All parts and labor for repairs (excluding all cables application computers,
software and other peripheral hardware)
opt.
opt.
Gold Contract for Leica Geosystems Laser Tracker
opt.
opt.
Comprises:
A fully comprehensive contract, that allows easy budgeting and guaranties that
your system is in optimal shape. It includes:
• A system check
• A yearly scheduled maintenance
• Traceable re-certification to national standard
• All parts and labor for repairs
• Application and technical telephone support
• Firmware revision upgrades
If Customer prefers the re-certification on-site, maintenance is limited to basic
system check
89119
Gold Contract for Leica T-Cam and Leica T-Probe
Comprises:
A fully comprehensive contract, that allows easy budgeting and guaranties that
your system is in optimal shape. It includes:
• A system check
• A yearly scheduled maintenance
• Traceable re-certification to national standard
• All parts and labor for repairs
• Application and technical telephone support
• Firmware revision upgrades
If Customer prefers the re-certification on-site, maintenance is limited to basic
system check
89335
Gold Contract for Leica T-Scan, Leica T-Cam and Leica T-Probe
Comprises:
A fully comprehensive contract, that allows easy budgeting and guaranties that
your system is in optimal shape. It includes:
• A system check
• A yearly scheduled maintenance
• Traceable re-certification to national standard
• All parts and labor for repairs
• Application and technical telephone support
• Firmware revision upgrades
If Customer prefers the re-certification on-site, maintenance is limited to basic
system check
opt.
opt.
Leica Geosystems Laser Tracker Service Contracts
47
LR
190
AT
R
M
190
AT
B
190
AT
s.
Po
opt.
opt.
opt.
89123
Silver Contract for Leica Geosystems Laser Tracker
• A system check
• A yearly scheduled maintenance
• Traceable re-certification to national standard
• or accuracy measurements, confirmed with
an Accuracy Statement
• Application and technical telephone support
• Firmware revision upgrades
• A system status report
If Customer prefers the re-certification on-site, maintenance is limited to basic system check.
Parts & labor for repairs excluded.
opt.
opt.
opt.
89131
Silver Contract for Leica T-Cam and Leica T-Probe
• A system check
• A yearly scheduled maintenance
• Traceable re-certification to national standard
• or accuracy measurements, confirmed with
an Accuracy Statement
• Application and technical telephone support
• Firmware revision upgrades
• A system status report
If Customer prefers the re-certification on-site, maintenance is limited to basic system check.
Parts & labor for repairs excluded.
opt.
opt.
5301 030
opt.
opt.
opt.
89126
On-site services available for all contracts in all EU countries, Switzerland & China.
On-site service work charged at a flat rate. Remark: Includes travelling hours and travelling
expenses. Only applicable for countries mentioned above.
opt.
opt.
opt.
89120
Stand-by System Option for Leica Geosystems Laser Tracker
Guaranteed availablability whilst your instrument is in service. System comprises of Sensor,
LT Controller, cables and/or Leica T-Cam with Leica T-Probe. Available within 24 hours (excluding
weekends, public holidays, excluding time for shipment customs clearance) after fault diagnosis
or upon request prior to maintenance or re-certification.
opt.
opt.
89122
Stand-by System Option Leica T-Cam and Leica T-Probe
Guaranteed availablability whilst your instrument is in service. System comprises of Sensor,
LT Controller, cables and/or Leica T-Cam with Leica T-Probe. Available within 24 hours (excluding
weekends, public holidays, excluding time for shipment customs clearance) after fault diagnosis
or upon request prior to maintenance or re-certification.
L = Set S = System
E = Spare part
std. = Standard delivery opt. = Option
Silver Contract for Leica T-Scan. Leica T-Cam and Leica T-Probe
Comprises:
• A system check
• A yearly scheduled maintenance
• Traceable re-certification to national standard
• or accuracy measurements, confirmed with
an Accuracy Statement
• Application and technical telephone support
• Firmware revision upgrades
• A system status report
If Customer prefers the re-certification on-site, maintenance is limited to basic system check.
Parts & labor for repairs excluded.
AT
90
1B
AT
90
1M
R
AT
90
1LR
Leica Geosystems Laser Tracker Service Contracts
Po
s.
48
89113
Maintenance & Re-certification for Leica Geosystems Laser Tracker
Duration: 2 working days. Comprises:
• A Maintenance
• Tracker compensation and, if applicable, a Leica T-Cam-to-tracker compensation
• Traceable re-certification to national standard
• or Accuracy measurements confirmed with Leica Geosystems Accuracy Statement
• A system status report
89115
Maintenance & Re-certification for Leica T-Cam and Leica T-Probe
Duration: 2 working days. Comprises:
• A Maintenance
• Tracker compensation and, if applicable, a Leica T-Cam-to-tracker compensation
• Traceable re-certification to national standard
• or Accuracy measurements confirmed with Leica Geosystems’ Accuracy Statement
• A system status report
5000 123
opt.
opt.
opt.
opt.
Maintenance & Re-certification for Leica T-Cam, Leica T-Probe, Leica T-Scan
Duration: 2 working days. Comprises:
• A Maintenance
• Tracker compensation and, if applicable, a Leica T-Cam-to-tracker compensation
• Traceable re-certification to national standard
• or Accuracy measurements confirmed with Leica Geosystems Accuracy Statement
• A system status report
opt.
opt.
89116
On-site Re-certification for Leica Geosystems Laser Tracker
Duration: 1 working day. Comprises:
• A system check
• Tracker compensation and, if applicable a Leica T-Cam-to-tracker compensation
• Traceable re-certification to national standard
• or Accuracy measurements confirmed with Leica Geosystems’ Accuracy Statement
• Excluding travel expenses and travelling hours
opt.
opt.
5000 122
On-site Re-certification for Leica T-Cam & T-Probe
Duration: 1 working day. Comprises:
• A system check
• Tracker compensation and, if applicable a Leica T-Cam-to-tracker compensation
• Traceable re-certification to national standard
• or Accuracy measurements confirmed with Leica Geosystems’ Accuracy Statement
• Excluding travel expenses and travelling hours
opt.
opt.
5000 121
On-site Re-certification for Leica T-Cam, Leica T-Probe and Leica T-Scan
Duration: 1 working day. Comprises:
• A system check
• Tracker compensation and, if applicable a Leica T-Cam-to-tracker compensation
• Traceable re-certification to national standard
• or Accuracy measurements confirmed with Leica Geosystems Accuracy Statement
• Excluding travel expenses and travelling hours
opt.
opt.
Extended Maintenance for Leica Geosystems Laser Tracker
Comprises: Extended Maintenance includes full factory maintenance and inspection, an extended system function check, cleaning and touch-up and tuning of the
instrument, firmware upgrades. An extended status report and a certificate traceable
to national standard is issued. Carried out exclusively at Leica Geosystems Laser
Tracker Service Center in Switzerland. Duration: 5 working days after reception of
opt.
opt.
89108
the goods.
opt.
opt.
opt.
Leica Geosystems Laser Tracker Services
49
LR
190
AT
R
M
190
AT
B
190
AT
s.
Po
opt.
opt.
opt.
99012
Rental System Leica Geosystems Laser Tracker
opt.
opt.
99012
Rental System Leica Geosystems Laser Tracker incl. Leica T-Cam and Leica T-Probe
On weekly basis and subject to availability.
On-site services available for all contracts in all EU countries, Switzerland & China
Repairs: Re-certification and/or maintenance work does not include repair. If repairs are necessary, the Customer will be notified and informed of the estimated costs (labor and parts) and of
necessary repair time, including shipment. Repairs are only carried out after written approval of
the repair estimate.
Shipment of systems to the designated Leica Geosystems Service Center and return to the
Customer is at Customer’s expense & sole risk.
Planning: At least 4 weeks in advance, Leica Geosystems & Customer agree in writing on an
appropriate date for carrying out the services.
General Terms and Conditions for the Maintenance and/or Support by Metrology Division of
Leica Geosystems apply for all services & contracts.
L = Set S = System
E = Spare part
std. = Standard delivery opt. = Option
50
Content Leica Geosystems Industrial Theodolites and Total Stations
Basic Instruments
Leica Geosystems Industrial Total Stations
Leica Geosystems Industrial Theodolite
Onboard Software
Producer Inspection Certificates
Manuals
52
52
53
53
54
Accessories
Remote Control System RCS
Memory Cards and Readers
Cables and PC-Interfaces 55
55
56
Power Supply
Batteries & Chargers
58
59
Optical Accessories for Instrument Telescope
Adapter Plate for TM5100A
60
Internal Targets
Eyepieces & Filters
60
60
60
Autocollimation Accessories
Diode Laser DL2
External Intensity Controller for all Types of Instruments
Internal intensity controller for TDM5005 and TDA5005 only
DL2 Compatible Reticules
North-Finding Gyroscopes
61
62
63
64
64
64
Target Equipment
Targets for Multi-Theodolites Systems
Reflectors for Total Stations
1) Retro reflective tape targets
2) Prism Reflectors
65
65
65
66
3) Corner Cube Reflectors
4) 360° Reflectors
68
68
69
Tripods and Centring Devices
Tribrach
Aluminium Tripods
Wooden Tripods
Translation Stages
NIVEL230 for levelling
69
69
69
70
70
71
Comprehensive Service Contracts
72
Maintenance
Re-certification
Extended Warranty
Stand-by Units
CCR Replacement
73
73
74
74
74
51
Leica Geosystems Industrial Total Stations
575661
Leica TDM5005 Motorized Industrial Total Station
Industrial keyboard and large illuminated display (8x85 characters LCD)
in both faces, compartment for internal battery and PCMCIA memory
card, two-axes compensator, servo motor controlled slow motion drives
for Hz and V settings, friction coupling, optical sight in both faces,
industrial reticule, reticule illumination. Incl. eyepiece FOK73 (32x magnification)
1x GDV3 short range lense for measurement to tape targets (632364),
1x Producer Inspection Certificate M TPS5000 (M) for distance measurements on tape targets (575876)
1x Industrial reticule GSTP25 with concentric circles and central opening
for DL2; in shipping container (575692)
Not included: AxyzComm Interface or other onboard SW, PCMCIA
memory card, battery, tribrach
575673
Leica TDA5005 Motorized Industrial Total Station with automatic target
recognition
Industrial keyboard and large illuminated display (8x85 characters LCD)
in both faces, compartment for internal battery and PCMCIA memory
card, two-axes compensator, servo motor controlled slow motion drives
for Hz and V settings, friction coupling, optical sight in both faces,
industrial reticle, reticle illumination. Incl. eyepiece FOK73 (32x magnification)
1x GDV3 short range lense for measurement to tape targets (632364),
1x AP31 aperture for measurements to CCR1.5” reflectors (575873),
1x Producer Inspection Certificate M TPS5000 (M) for distance measurements on tape targets (575876)
1x Producer Inspection Certificate M TPS5000 (M) for distance measurements on Corner Cube Reflector CCR1.5” (575863),
1x Industrial reticle GSTP25 with concentric circles and central opening
for DL2 (575692); in shipping container
Not included: AxyzComm Interface or other onboard SW, PCMCIA
memory card, battery, tribrach
Leica Geosystems Industrial Theodolite
575657
Leica TM5100A Motorized Industrial Theodolite with pan focal telescope
and built-in autocollimation eyepiece
Industrial keyboard and large illuminated display (8x85 characters LCD)
in both faces, compartment for internal battery and PCMCIA memory
card, two-axes compensator, servo motor controlled slow motion drives
for Hz and V settings, friction coupling, optical sight in both faces,
industrial reticule, reticule illumination. Incl. eyepiece FOK73 (32x magnification)
1x Industrial reticule GSTP24 with concentric circles and central opening
for DL2 (575691)
1x SW AxyzComm Interface; in shipping container (575591)
Not included: Onboard SW, internal battery, tribrach, PCMCIA memory
card, Autocollimation lamp AL51
50
05
TD
A5
00
5
M
TD
51
00
A
Basic Instruments
TM
52
Leica Geosystems Industrial Theodolites & Total Stations Accessories
M
5
00
A5
TD
05
50
TD
A
00
51
TM
Onboard Software
opt.
575591
AxyzComm Interface Program License for TPS1000/2000/5000
opt.
575761
Man CAT Comm Program License for TPS5000
(also serves as keyboard emulation SW to provide backwards
compatibility with T/C2002, T3000 instruments and 3rd party SW)
opt.
575811
SW DCP05 Basic for Dimensional Control, inclusive DCPCOM for file
conversion, with operator’s manual, English & German.
For TPS 1000/2000/5000 Totalstations.
opt.
575812
SW DCP05 Demo License
Not for resale and/or contract work.
Available with approval from product management
opt.
742616
Leica GEO Office Tools for data exchange
SW upload and configuration of TPS5000
opt.
663156
TPS1000 Program “Free-Station Survey”
opt.
663267
TPS1000 Program “Local Resection”
opt.
opt.
For Surveying SW, please see price list of Surveying & Engineering
Division
Producer Inspection Certificates
All Certificates are traceable to national standards
opt.
opt.
opt.
632253
Producer Certificate IMS (O)
opt.
opt.
opt.
575668
Producer Inspection Certificate (M) for angles
opt.
std.
575863
Producer Inspection Certificate M TPS5000
for distance measurements on Corner Cube Reflector CCR1.5”
std.
std.
575876
Producer Inspection Certificate M TPS5000 (M) for distance measurements on tape targets
opt.
632252
Producer Inspection Certificate M TPS5000 (M) for distance measurement to surveying prisms
opt.
std. = Standard delivery opt. = Option
S&G = Leica Geosystems survey products
53
50
05
TD
A5
00
5
M
TD
51
00
A
Leica Geosystems Industrial Theodolites & Total Stations Accessories
TM
54
Manuals
664901
Manual TPS1000 System and Programs, English
For other languages see S&G price list
std.
std.
std.
664955
Manual TPS1000 Quick Start, English
For other languages see S&G price list
std.
std.
std.
575664
Manual TPS5000 system
(English, German, French in one book)
std.
std.
std.
664944
User Manual DL2
(English, German, French, Spanish in one book)
opt.
opt.
opt.
602488
Manual T-LINK, LINK8, English
opt.
opt.
opt.
Leica Geosystems Industrial Theodolites & Total Stations Accessories
M
5
00
A5
TD
05
50
TD
A
00
51
TM
Accessories
Remote Control
opt.
575757
opt.
Wireless RF Control
Approved for: Australia, EU, Czech Republic, Hungary, Malaysia, Mexico,
New Zealand, Norway, Philippines, Poland, Russia, Switzerland, Thailand,
Hong Kong (Radio Frequency: 40Mhz, Range: 30m, plugs into a USB port
on a Windows computer) incl. CD with drivers and templates for Axyz,
Metrolog XG for Leica and emScon
Memory Cards and Readers
Off-line link via PCMCIA card (e.g. DCP05)
S&G
opt.
opt.
opt.
639949
PCMCIA SRAM Memory Card, 2 MB
(approx. 18,000 data blocks)
S&G
opt.
opt.
opt.
743119
MCR6 USB Card Reader
As an alternative, the operator may also transfer data via serial interface
using LGO Tools
std. = Standard delivery opt. = Option
S&G = Leica Geosystems survey products
55
50
05
TD
A5
00
5
M
TD
51
00
A
Leica Geosystems Industrial Theodolites & Total Stations Accessories
TM
56
Cables and PC-Interfaces
Cables – On-line link to application PC
Configuration for single instrument, powered with internal battery
734700
Data Cable GEV189, 2m, connects instrument with USB for serial
communication (incl. USB electronics). PC driver and user manual
included on CD
S&G
opt.
opt.
opt.
563625
Data Transfer Cable GEV102, 2m, connects instrument and RS232
interface
S&G
opt.
opt.
opt.
Leica Geosystems Industrial Theodolites & Total Stations Accessories
M
5
00
A5
TD
05
50
TD
A
00
51
TM
opt.
opt.
opt.
574948
Data Transfer Cable 10m, connects instrument and RS232 interface
Configuration for single instrument, powered with external battery/
mains
S&G
opt.
opt.
opt.
409684
Y-Cable GEV58, long, (Lemo 0, Lemo 0, Lemo 1)
connects instrument with external power supply T_LINK/GEV208 or
battery GEB70/171 and PC (requires additional connector 707525)
or radio link TCPS26B
S&G
opt.
opt.
opt.
707525
Lemo 0 - RS232 Adapter
(9pin female) for 409684 and 707135
Configuration for multiple instrument, powered with mains
S&G
opt.
opt.
opt.
527497
Data Cable GEV86, 20 m, connects instrument with external power
supply T-LINK/GEV208 or battery GEB70/171
S&G
opt.
opt.
opt.
409678
Data Cable GEV52, 1.8m, connects instrument or intensity regulator DL2
with external power supply T-LINK/GEV208 or battery GEB70/171
std. = Standard delivery opt. = Option
S&G = Leica Geosystems survey products
57
800497
Cable Spool for 20m/40m Cables
50
05
TD
A5
00
5
M
TD
51
00
A
Leica Geosystems Industrial Theodolites & Total Stations Accessories
TM
58
opt.
opt.
opt.
Note: For multi-RS232 adapters on, we recommend Quatech USB adapters such as QSU-100, see also on www.quatech.com
For each COM port of such multi RS232 adapter, one RS232 cable
(9F/9F) is required.
Power Supply
Mains Power Supply
575427
Interface T_LINK (max. total 8 instruments)
Power supply unit for TPS, for indoor use only. Input 94-265VAC to
output 12VDC
opt.
opt.
opt.
749279
GEV208, Power supply unit for TPS/GPS, for indoor use only
Input 100-240VAC to output 12VDC, with connection for power cables
S&G
opt.
opt.
opt.
Leica Geosystems Industrial Theodolites & Total Stations Accessories
M
5
00
A5
TD
05
50
TD
A
00
51
TM
Batteries & Chargers
S&G
opt.
opt.
opt.
667147
Internal Battery GEB187, plug-in, nickel-metal-hydride, (Ni-MH), 1.8Ah
S&G
opt.
opt.
opt.
727367
External Battery GEB171, 12V 8Ah, Ni-MH, rechargeable
S&G
opt.
opt.
opt.
636983
Charger GKL22, 230V, 50/60Hz, Euro-type plug, charges one battery
GEB87, GEB187 or GEB70, normal charge 14 hours
S&G
opt.
opt.
opt.
639959
Simple Charger GKL22-1, same as GKL22 but with 115 V, 50/60 Hz,
and US -type plug
S&G
opt.
opt.
opt.
733271
GKL221, Charger PRO. To be used with up to two charging adapters
GDI221 or GDI222, Charger cable and net adapter included
S&G
opt.
opt.
opt.
733322
GDI222, Adapter for GKL221
For charging Ni-MH batteries of type GEB121, GEB111,, charger cable
included for GEB87, GEB187, GEB77, GEB79, GEB70, GEB71, GEB171
or adapter plate GDI121
std. = Standard delivery opt. = Option
S&G = Leica Geosystems survey products
59
50
05
TD
A5
00
5
M
TD
51
00
A
Leica Geosystems Industrial Theodolites & Total Stations Accessories
TM
60
Optical Accessories for Instrument Telescope
Adapter Plate for TM5100A
575870
Active Adapter Plate for TM5100A with power supply (factory fit). USA
only
opt.
575871
Passive Adapter Plate for TM5100A without power supply (factory fit)
opt.
S&G
opt.
Internal Targets
433472
Internal Target GUS29, for collimation measurements. Factory fit to
T3000(A) and TM5100(A)
Eyepieces & Filters
377802
Eyepiece FOK53, 44x magnification at 10m / 30ft (fitted in serviceshop)
S&G
opt.
opt.
opt.
743504
GVO13 Objective Sun Filter
opt.
opt.
opt.
734514
GFZ3 Diagonal Eyepiece for Telescope, except T100
opt.
opt.
376236
Eyepiece GOK6
for steep sights up to 72°, rotatable in vertical plane
S&G
opt.
opt.
opt.
712504
Counterweight for TM5100(A) and T3000(A)
if steep angle eyepiece GOK6 is attached
opt.
632364
GDV3 Short Range Lens for retro targets in container (only replacement,
as included in standard delivery of TPS5000 total stations, a re-issue of
the certificate M distances is necessary with any new additional lens!)
std.
std.
575873
AP31 Aperture (diam = 31mm) for use with TDM/TDA5005 and CCR 1.5”
(575875)
opt.
std.
Leica Geosystems Industrial Theodolites & Total Stations Accessories
M
5
00
A5
TD
05
50
TD
A
00
51
TM
Autocollimation Accessories
S&G
opt.
opt.
199899
Autocollimation Eyepiece
S&G
opt.
opt.
394787
Plug-in Lamp, with cable to battery
S&G
opt.
opt.
394792
Battery Box GEB63 for autocollimation eyepiece, without 9V battery
575725
AL51 Plug-in Lamp for TM5100A only
392368
Autocollimation Mirror GAS1, ø 50mm, in case
opt.
opt.
opt.
opt.
std. = Standard delivery opt. = Option
S&G = Leica Geosystems survey products
61
50
05
TD
A5
00
5
M
TD
51
00
A
Leica Geosystems Industrial Theodolites & Total Stations Accessories
TM
62
Diode Laser DL2
Visualizes the line-of-sight by truly non contact means
Applied for:
- Marking points
- Digitizing
- Setting-out points by design values
- Positioning and alignment
- Locating reflectors in remote control mode
Configuration for DL2 & instrument power supply via external battery
Configuration for DL2 & instrument power supply via interface T_LINK
574822
Diode Laser Eyepiece DL2 with manual, in case
opt.
opt.
opt.
Leica Geosystems Industrial Theodolites & Total Stations Accessories
M
5
00
A5
TD
05
50
TD
A
00
51
TM
Specifications DL2 Diode Laser Pointer
Ambient Conditions
Operating temperature
Storage temperature
Humidity
723231
opt.
-10°C to + 35°C
-40°C to + 60°C
0-95%, non condensing
Optic specifications
Power output at objective
Safety
Class 2 Laser Products
Eye protection Range on daylight
Range in darkness
< 1mW
Class 2 Laser Product in accordance with:
IEC 60825-1 (2001-08):
„Safety of Laser Products” resp.
EN 60825-1: 1994 + A11: 1996 + A2: 2001
„Safety of Laser Products”
Do not stare into the beam or direct it
unnecessarily at other persons
Integral laser retaining film on beam splitter
about 140m
about 400m
Laser source
Wavelength
Laser Diode
635mm
Dimensions
Laser eyepiece with housing
38 x 58 x 25mm
Intensity regulator
Tilt angle of telescope
98 x 65 x 58mm
depending on instrument type
(varies with position of DL2)
Weight
DL2
0.07kg
Intensity regulator
0.27kg
Counterweight for TM5100(A) and T3000(A)
if diode laser DL2/3 is attached
External Intensity Controller for all Types of Instruments
opt.
opt.
opt.
574835
Intensity regulator
opt.
opt.
opt.
574834
Cable, 1m, connects DL2 and intensity regulator
opt.
opt.
opt.
407678
Cable GEV63, 1.2m, connects instrument with DL2 intensity regulator
std. = Standard delivery opt. = Option
S&G = Leica Geosystems survey products
63
M
TD
TM
50
05
TD
A5
00
5
Leica Geosystems Industrial Theodolites & Total Stations Accessories
51
00
A
64
Internal intensity controller for TDM5005 and TDA5005 only
573447
Conversion Kit DL2
comprising: DM cover (IMS grey) with cable socket and indicating diode,
adapter cable between DM - cover and DL2. Factory fitted
opt.
opt.
opt.
opt.
DL2 Compatible Reticules
376555
Reticule GSTP2 for T2002, TPS100 old, TPS1000, TPS5000 with central
opening. Retro fit to TM/TDM/5000, TM/TDM/TDA5005
North-Finding Gyroscopes
Fully automatic precision surveying gyroscope for North-finding
measurements
Applied for:
- Precision directional measurements, where GPS is inaccessible e.g.
- Naval shipbuilding
- Tunnelling
- Please ask for separate information on Gyromat 3000 by
DMT/Germany
Technical Data
Measuring mode
1
2
Interactive mode
Measuring accuracy in mgon
Standard deviationto DIN 18723, ± 1δ
1
10
depends on operation
Measuring time in minutes (approx.)
10
2
depends on operation
Battery capacity for single measurements
25
50
depends on operation
Operating temperature
-20°C to +50°C (-12°C to +45°C calibrated)
Operating range
up to 80° latitude
Dimensions and weight
GYROMAT 3000
Without Theodolite
11,5kg
215mm centering diameter
Transport container
26kg, 460x460x800mm (LxWxh)
Tripod
8kg, 300mm diameter
Leica Geosystems Industrial Theodolites & Total Stations Accessories
65
M
5
00
A5
TD
05
50
TD
A
00
51
TM
Target Equipment
Targets for Multi-Theodolites Systems
opt.
opt.
opt.
800742
Scale Bar 0,9m, carbon fibre, incl. Producer Inspection Certificate,
in carrying case
opt.
opt.
opt.
574681
Orientation Target (magnetic)
opt.
opt.
opt.
571549
Self-adhesive target foils, black/white, ø 23mm, 48 pieces on one sheet
Reflectors for Leica Geosystems Total Stations
1)
2)
3)
4)
Retro-reflective tape targets for industrial applications
Prism reflectors for typical survey applications
Corner Cube Reflector for precision measurements
360° Reflector for tracking applications
Specifications for Reflectors
Default
Distance Offset
Corner Cube Reflector
CCR 1.5“
35.5mm
std. = Standard delivery opt. = Option
S&G = Leica Geosystems survey products
Acceptance
Typical accuracy
Angle
Distance Measurement
Range
Hz ± 10°
V ± 20°
0.2mm
0.3mm
<600m
Tape Targets
20 x 20mm
40 x 40mm
60 x 60mm
34.4mm
34.4mm
34.4mm
± 42°
± 42°
± 42°
0.5mm
0.5mm
0.5mm
<60m
20 - 120m
60 - 180m
Surveying Prisms
Prec. Prism GPH1P
Miniprism GMP101
0mm
17.5mm
± 30°
± 30°
0.3mm
0.5mm
<2500m
<1000m
360° Prisms
GRZ121
23.1mm
V ± 27°
Hz 360°
2mm
<1300m
Hz 360°
V ± 27°
1.5mm
<500m
Miniprism
GRZ101
30.0mm
50
05
TD
A5
00
5
M
TD
51
00
A
Leica Geosystems Industrial Theodolites & Total Stations Accessories
TM
66
1) Retro Reflective Tape Targets
Inexpensive tape targets available in different design and size
Applied for:
- Standard applications
- Manual measurements
574999
Hidden Point rod 0.5m, with tape targets
opt.
opt.
573487
Magnetic Support for hidden point bar, 0.5m
opt.
opt.
635317
Retro Targets, 20x20mm,
20 pieces, self-adhesive (avg. range 2-60m)
opt.
opt.
635318
Retro Targets, 40x40mm
20 pieces, self-adhesive (avg. range 20-120m)
opt.
opt.
635319
Retro Targets, 60x60mm
20 pieces, self-adhesive (avg. range 60-180m)
opt.
opt.
575271
Ring Shaped Retro Target, 100 pieces
ø central aperture = 5mm, ø outside = 26mm,
light orange, self-adhesive (avg. range up to 50m)
opt.
opt.
574998
Target-Kit with retro-target on magnetic target, in case, comprising:
20 ring-shaped retro-target, central aperture
ø 5mm, outside ø 26mm (575271)
opt.
opt.
20x retro-target, 20x20mm (635317)
20x retro-target, 40x40mm (635318)
4x RB bases (575776)
1x RBC base (575777)
4x RT3-90 targets (575773)
4x RT3-45 targets (575774)
4x RT3-0 targets (575775)
Leica Geosystems Industrial Theodolites & Total Stations Accessories
M
5
00
A5
TD
05
50
TD
A
00
51
TM
opt.
opt.
575088
Pass Point-Retro Target Set, in case, comprising:
3 swivel targets with retro reflective foils, ø45mm, h=75mm, 3 magnetic
bases
opt.
opt.
575940
Roller Alignment Target Fixture, comprising
2 pcs. Floor fixtures
1 pce. Roller fixture
2 pcs. RT3-90 targets (575773)
2 pcs. RT3-45 targets (575774)
excl. CCR1.5“ reflector (575875) and CCR1.5“ supports (576076)
opt.
opt.
575773
RT3-90
Tape target with offset 30mm ± 0.05mm, magnetic. Fits to target base
RB and RBC
opt.
opt.
575774
RT3-45
Tape target with offset 30mm ±0.05mm, magnetic,
fits to target RB and RBC
opt.
opt.
575775
RT3-0
Tape target with offset 30mm ±0.05mm, magnetic,
fits to target base RB and RBC
opt.
opt.
575776
RB
Magnetic target base with offset 10mm ±0.05mm, magnetic, fits to tape
targets RT3
opt.
opt.
575777
RBC
Magnetic target base with offset 10mm ±0.05mm, fits to tape targets
RT3, with central bolt hole and locating pin
std. = Standard delivery opt. = Option
S&G = Leica Geosystems survey products
67
50
05
TD
A5
00
5
M
TD
51
00
A
Leica Geosystems Industrial Theodolites & Total Stations Accessories
TM
68
2) Prism Reflectors
Glass prism targets for surveying applications
Available in different size and centring accuracy
Applied for:
- Standard applications with fixed target locations
- Automatic measurements
- Surveying applications
For a wider range of prism supports, please ask your Leica Geosystems
representative or download catalogue from
http://downloads.leica-geosystems.com/downloads/areas/zz/construction/accessories/index.htm
362830
Circular Prism GPR1 (avg. range up to 2500m)
S&G
opt.
opt.
362820
Single Prism Holder GPH1 for GPR1
S&G
opt.
opt.
641662
Miniprism set GMP101
(avg. range up to 1000m)
Set with bubble, spike and bag
opt.
opt.
555631
Single Prism Precision Reflector GPH1P
(avg. range up to 2500m)
S&G
opt.
opt.
opt.
opt.
3) Corner Cube Reflectors
Air path corner cube in black (“swoxed ”) spherical housing
Replacement program for broken reflectors available
Applied for:
- Precision measurements
- Automatic measurements
- Fully compatible with Leica Geosystems Laser Tracker
575875
Reflector CCR 1.5”, swoxed (avg. Range up to 600m)
For wide range of supports, please consult Leica Geosystems Laser
Tracker section
Leica Geosystems Industrial Theodolites & Total Stations Accessories
M
5
00
A5
TD
05
50
TD
A
00
51
TM
4) 360° Reflectors
Glass prism targets for surveying applications
Available in different size and centring accuracy
Applied for:
- Automatic tracking measurements in “Step-and-Go” mode
For a wider range of prism supports, please ask your Leica Geosystems
representative or download catalogue from
http://downloads.leica-geosystems.com/downloads/areas/zz/construction/accessories/index.htm
S&G
opt.
667399
360° Prism Reflector GZR121
(avg. range up to 1300m) for typical use with TDA5005 in tracking
mode with low accuracy requirements
Tripods and Centring Devices
Tribrach
opt.
opt.
opt.
575459
GDF21-I, industrial tribrach, without optical plummet, light grey
opt.
opt.
opt.
575733
GDF22-I, industrial tribrach with optical, plummet, light grey
Aluminium Tripods
opt.
opt.
opt.
575483
Aluminium Tripod AT21
with adjustable centre column. Robust, well-established tripod for
general use and 5/8” thread. Suitable for Total Stations, Theodolites and
laser tracker field check equipment. Instrument height from 1.4 –2.1m,
weight 11kg
opt.
opt.
opt.
575484
Aluminium Tripod AT28
with adjustable centre column. Robust, well-established tripod for
general use and 5/8” thread. Suitable for Total Stations, Theodolites and
laser tracker field check equipment. Instrument height from 1.4 –2.8m,
weight 12kg
std. = Standard delivery opt. = Option
S&G = Leica Geosystems survey products
69
575498
Tripod Bracket in order to attach accessories (battery, DL2 intensity
regulator, Radio Modem) to AT21/28 tripods
50
05
TD
A5
00
5
M
TD
51
00
A
Leica Geosystems Industrial Theodolites & Total Stations Accessories
TM
70
opt.
opt.
opt.
Wooden Tripods
296632
Tripod GST20, telescopic, with accessories. Robust, well-established
tripod for general use. Suitable for levels, lasers, Total Stations and GPS.
Extendible 180cm (5.9ft), weight 6.4kg (14.1lb)
S&G
opt.
opt.
opt.
332200
Tripod Base GST4, for setting up GST tripods on smooth surfaces.
S&G
opt.
opt.
opt.
Translation Stages
Precision translation stage to shift instrument along axis
Applied to:
- Alignment to references
- Alignment of instruments and/or targets
1st GMT5 shifts in single direction; a 2nd translation stage is required
for orthogonal shifts
417677
Measuring Slide GMT5 (single direction)
with maximum working range 40mm; least count 0.01mm
opt.
opt.
opt.
417678
GAD12 Adapter Set for mounting GMT5
translation stage onto any Leica tribrach; includes tribrach to mount
instrument; typical adapter set for theodolites and total stations
opt.
opt.
opt.
417679
GAD13 Adapter Set for mounting GMT5
translation stage onto 5/8” thread; includes adapter plate with 5/8”
thread to mount instruments; typical adapter set for levels
opt.
opt.
opt.
Leica Geosystems Industrial Theodolites & Total Stations Accessories
M
5
00
A5
TD
05
50
TD
A
00
51
TM
NIVEL230 for Levelling
Currently, there is not a supported software package for this usage.
This information is provided for customers that are interested in creating
their own SW solutions, or have existing solutions.
std. = Standard delivery opt. = Option
S&G = Leica Geosystems survey products
576000
NIVEL230, inclination sensor for Laser Tracker with RS232 interface
Supports gravity-based coordinate measurements, with Producer Inspection Certificate M NIVEL230
748335
1.7m Power Supply Cable
Connects Nivel sensors to power supply unit 722409
802902
1.0m Connection Cable. Connects NIVEL230 sensor ports 1 and 2 to PC
for data communication etc. Lemo to 9 pin RS232 serial connector.
722409
Power supply unit for Nivel sensors
For indoor use only, input 100V-240VAC 50-60 Hz, output 12VDC, cable
with 5 pin Lemo. No mains cable included.
731772
Power Cord for Dual Bay Charger GKL24 or Nivel200 Power supply unit,
US-Version
731773
Power Cord for Dual Bay Charger GKL24 or Nivel200 Power supply unit,
EU-Version
734232
Power Cord for Dual Bay Charger GKL24 or Nivel200 Power supply unit,
UK-Version
734233
Power Cord for Dual Bay Charger GKL24 or Nivel200 Power supply unit,
AUS-Version
738586
Power Cord for Dual Bay Charger GKL24 or Nivel200 Power supply unit,
CH-Version
71
Repairs
Re-certification and/or maintenance work does not include repair. If
repairs are necessary, the Customer will be notified and informed of the
estimated costs (labor and parts) and of necessary repair time, including shipment. Repairs are only carried out at Leica Geosystems Service
Center
Planning
At least 4 weeks in advance, Leica Geosystems and the Customer agree
in writing on an appropriate date for carrying out services either on site
or at a Service Center
50
05
TD
A5
00
5
M
TD
51
00
A
Comprehensive Service Contracts
TM
72
Leica Geosystems TPS5000 Service Products
M
5
00
A5
TD
05
50
TD
A
00
51
TM
Maintenance
opt.
opt.
opt.
5001280
TPS5000 Standard Maintenance
Maintenance, accuracy testing and service inspection, Certificate O
(compliant within specs). Carried out at Service Center, Heerbrugg.
Includes shipping. Excludes repairs (labor & parts), insurance, taxes &
duties. Available in years 1, 2 and 3 after initial purchase or after an
Extended Maintenance
opt.
opt.
opt.
5001281
TPS5000 Extended Maintenance
Extended maintenance, including greasing and/or replacement of mechanics when needed, accuracy testing and service inspection, Certificate O (compliant within specs). Carried out at Service Center, Heerbrugg. Includes shipping. Excludes repairs (labor & parts), insurance,
taxes & duties. Mandatory every 4th. year after purchase.
Re-certification (option to Maintenance)
opt.
5000091
TM5100A Re-certification for Angles
Service Inspection Certificate M for Angle Measurements. Carried out at
Service Center, Heerbrugg. Only available in combination with Standard
or Extended Maintenance.
opt.
opt.
5000092
TDM5005/TDA5005 Re-certification for Angles
Service Inspection Certificate M for Angle Measurements. Carried out at
Service Center, Heerbrugg. Only available in combination with Standard
or Extended Maintenance.
opt.
opt.
5000094
TDM5005/TDA5005 Re-certification to CCR1.5”
Service Inspection Certificate M for Distance Measurements on Corner
Cube Reflector’s 1.5”. Carried out at Service Center, Heerbrugg. Only
available in combination with Standard or Extended Maintenance.
std. = Standard delivery opt. = Option
S&G = Leica Geosystems survey products
L = Set
73
50
05
TD
A5
00
5
M
TD
51
00
A
Leica Geosystems TPS5000 Service Products
TM
74
Extended Warranty
89333
TDM5005 & TDA5005 Extended Warranty
Extention of Warranty contract covering parts and labor. Duration:
12 months. Can only be offered in combination with a maintenance
contract. Limited to max 5 years after delivery of the system. Carried
out at Customer Service Center, Heerbrugg. Including shipping, spare
parts & labor of main instrument. Excl. insurance, taxes & duties. Ext.
Warranty excludes accessories and consumables (batteries, reflectors
etc.).TDM5005 & TDA5005 Extended Warranty
89334
TM5100A Extended Warranty
Extention of Warranty contract covering parts and labor. Duration: 12
months. Can only be offered in combination with a maintenance contract. Limited to max 5 years after delivery of the system. Carried out at
Customer Service Center, Heerbrugg. Including shipping, spare parts &
labor of main instrument. Excl. insurance, taxes & duties. Ext. Warranty
excludes accessories and consumables (batteries, reflectors etc.).
Standby Units
5001282
TDA5005/TM5001A Stand-by Unit
A Stand-by Unit can be ordered for the time the instrument is not at
disposal of customer due to service or maintenance works. Includes
instrument, required onboard software and mutually agreed accessories.
Supplied on availability. To be ordered at 2 weeks prior notice. Shipping,
insurance and custom expenses excluded.
opt.
opt.
Ordering these Services at service.admin@leica-geosystems.com
For details please contact Ludwig.Junker@leica-geosystems.com
at the Central Technical Service in Heerbrugg.
General Terms and Conditions for the Maintenance and/or Support by
Metrology Division of Leica Geosystems apply for all services & contracts.
CCR Replacement
99575875
Replacement Corner Cube Reflector CCR 1.5” (“swoxed”)
Defective part must be returned to Heerbrugg attn. Jacqueline Binkert
with Label “Parts to be returned”,
mailto: jacqueline.binkert@leica-geosystems.com]
Ordering these Services at service.admin@leica-geosystems.com.
For details please contact Ludwig.Junker@Leica-Geosystems.com
at the Central Technical Service in Heerbrugg.
General Terms and Conditions for the Maintenance and/or Support by
Metrology Division of Leica Geosystems apply for all services & contracts.
std. = Standard delivery opt. = Option
S&G = Leica Geosystems survey products
L = Set
75
76
Whether building the fastest car, the biggest plane or the most precise
tooling, you need exact measurements to improve quality and productivity.
So when it has to be right, professionals trust Leica Geosystems metrology
products to help collect, analyze and present 3-dimensional (3D) data for
industrial measurement.
Leica Geosystems Metrology is best known for its broad array of control and
industrial measurement products, including high-precision industrial theodolites and total stations, laser trackers and 6 Degrees of Freedom-based
(6DOF) Portable CMM systems. The latter include the Leica T-Probe handheld armless probe, Leica T-Scan hand-held laser scanner and Leica T-Mac
tracking device for automated applications. Leica Geosystems also offers a
broad range of 3D metrology software solutions. Those who use the metrology products by Leica Geosystems every day trust them for their dependability, the value they deliver and the world-class service and support that’s
second to none.
Precision, reliability and service from Leica Geosystems metrology products.
When it has to be right.
751789
© Copyright 2008 − Leica Geosystems AG, Unterentfelden, Switzerland
Non contractual pictures. Specifications are given as information and can change without notice.
For more information, please contact info.metrology@leica-geosystems.com
Leica Absolute Tracker
Product Brochure
Art. 764370
Leica Geosystems AG
Metrology Products
Moenchmattweg 5
CH-5035 Unterentfelden
Switzerland
Phone +41 62 737 67 67
Fax +41 62 723 07 34
info.metrology@leica-geosystems.com
www.leica-geosystems.com/metrology
PCMM System Specifications
Leica Absolute Tracker and
Leica T-Products
Art. 764365