2.4-GHz RF FRONT END CC2595 FEATURES

2.4-GHz RF FRONT END CC2595 FEATURES
CC2595
www.ti.com
SWRS090A – SEPTEMBER 2010 – REVISED MARCH 2011
2.4-GHz RF FRONT END
Check for Samples: CC2595
FEATURES
•
1
•
•
•
Low Cost and Small Package
Very Few External Components
2.0-V to 3.6-V Operation
•
•
•
Less Than 1-μA Current Consumption in
Power Down Mode
Low Transmit Current Consumption
98 mA at 3 V for +20.7 dBm Out (PAE = 40%)
RoHS Compliant 3- x 3-mm QFN-16 Package
DESCRIPTION
CC2595 is a PA solution that extends the range of any Zigbee or Bluetooth transceiver. It is a cost-effective and
high performance RF front end for low-power and low-voltage wireless applications in the 2.4-GHz band. Its
single-ended RF input and output make it compatible with any manufacturer’s transceiver if appropriate external
parts are used. When a transmit/receive (T/R) switch and a balun are used, it can interface with existing and
future CC24XX and CC25XX transceiver products. CC2595 extends the link budget by providing a power
amplifier for improved output power. It is highly effective for high (+20 dBm) output power making it suitable for
battery-operated systems. CC2595 contains PA and RF-matching for simple design of high performance wireless
applications. It is packaged in a 3- x 3-mm, 16-lead QFN package with exposed paddle.
FUNCTIONAL BLOCK DIAGRAM
AVDD_PA1
AVDD_PA2
RF_IN
RF_OUT
Bias and Logic
RBIAS1
RBIAS2
AVDD_BIAS PA_EN
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010–2011, Texas Instruments Incorporated
CC2595
SWRS090A – SEPTEMBER 2010 – REVISED MARCH 2011
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
GND
1
RF_IN
2
GND
AVDD_PA1
GND
GND
PIN ASSIGNMENTS
16
15
14
13
12
RF_OUT
11
GND
10
RF_OUT
3 x 3 QFN - 16
9
5
6
7
8
PAEN
4
RBIAS2
GND
RBIAS1
3
AVDD_BIAS
GND
GND
Figure 1. CC2595 Pinout
Table 1. Pin Descriptions for CC2595
2
PIN NO.
PIN NAME
TYPE
1
GND
GND
2
RF_IN
RF in/out
3
GND
GND
DESCRIPTION
RF single-ended input
4
GND
GND
5
AVDD_BIAS
Power
Supply voltage, analog and logic
6
RBIAS1
Analog
Bias set resistor, stage 1
7
RBIAS2
Analog
Bias set resistor, stage 2
8
PAEN
Digital in
9
GND
GND
10
RF_OUT
RF in/out
11
GND
GND
12
RF_OUT
RF in/out
13
GND
GND
14
GND
GND
15
AVDD_PA1
Power
16
GND
GND
Chip enable: high = PA on
RF single-ended output (1 of 2)
RF single-ended output (2 of 2)
Supply voltage, PA stage 1
Submit Documentation Feedback
Copyright © 2010–2011, Texas Instruments Incorporated
Product Folder Links: CC2595
CC2595
www.ti.com
SWRS090A – SEPTEMBER 2010 – REVISED MARCH 2011
Table 2. ORDERING INFORMATION (1)
(1)
(2)
TA
PACKAGE (2)
ORDERABLE PART NUMBER
TOP-SIDE MARKING
–40ºC to 85ºC
RGT (QFN)
CC2595RGTR
C2595
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
ABSOLUTE MAXIMUM RATINGS (1)
Over operating free-air temperature range (unless otherwise noted).
Supply voltage range
Voltage on any digital pin
VALUE
UNIT
-0.3 to 3.6
V
-0.3 to VDD + 0.3, max 3.6
V
+10
dBm
RF input power RF_IN
TSTG
Storage temperature range
–50 to 150
°C
TJ
Junction temperature
150
°C
RF pins
1500
ESD
(1)
Excluding RF pins
HBM (Human Body Model)
V
2000
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating
conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
over operating free-air temperature range (unless otherwise noted)
MIN
Operating supply voltage
TA
Operating free air temperature range
NOM
MAX
UNIT
2
3.6
V
–40
85
°C
MAX
UNIT
ELECTRICAL CHARACTERISTICS
TJ = 25°C, VDD = 3 V (unless otherwise specified)
PARAMETER
TEST CONDITIONS
Current consumption
No input signal
Power down current
EN = LOW
MIN
30
High input level (control pin)
1.3
Low input level (control pin)
Power down → Transmit
TYP
Time from EN goes HIGH to settled in TX
mA
1
µA
VDD
V
0.3
V
1
µs
Submit Documentation Feedback
Copyright © 2010–2011, Texas Instruments Incorporated
Product Folder Links: CC2595
3
CC2595
SWRS090A – SEPTEMBER 2010 – REVISED MARCH 2011
www.ti.com
RF CHARACTERISTICS
TJ = 25°C, VDD = 3 V (unless otherwise specified)
PARAMETER
TEST CONDITIONS
f
Frequency range of operation
POUT
Output power
Pin = 0 dBm
PAE
Power added efficiency
Pin = 0 dBm
POUTHI
Output power (high)
VDD = 3.3 V, Pin = +3 dBm
PAEHI
Power added efficiency (high)
VDD = 3.3 V, Pin = +3 dBm
P1dB
Output 1-dB compression point
IRL
Input return loss
ORL
Output return loss
+22
8
Output power variation over supply voltage
2 V to 3.6 V
Output power variation over temperature
-40°C to 85°C
The harmonics can be further
reduced by using an external
LC filter and antenna.
Stability
Load mismatch
MAX
UNIT
2483.5
MHz
+20.7
dBm
40
2400 MHz to 2483.5 MHz
2nd harmonic
4
+20
Output power variation over frequency
3rd harmonic
TYP
2400
10
Harmonics
K
MIN
+22.5
%
dBm
45
%
+17
dBm
15
dB
10
dB
0.5
dB
4
dB
1
dB
Compliant with international
regulatory standards
Compliant with international
regulatory standards
Unconditionally stable
No damage at 10:1 VSWR
condition; all phases
Submit Documentation Feedback
Copyright © 2010–2011, Texas Instruments Incorporated
Product Folder Links: CC2595
CC2595
www.ti.com
SWRS090A – SEPTEMBER 2010 – REVISED MARCH 2011
TYPICAL CHARACTERISTICS
PA Output Power, PAE, Current Consumption and Gain
vs
Input Power
(3-V Supply)
60
120
50
100
PA Output Power
vs
Supply, 0-dBm Input
22
21
40
80
20
60
Gain
19.5
40
I_supply
19
POUT
10
0
-25
20
18.5
18
0
-20
20
-15
-10
PIN - dBm
-5
0
5
2
2.2
2.4
2.6
Noise Figure and Gain
vs
Frequency
(3-V Supply)
30
7
28
25
22
Gain
5
24
4
22
POUT - dBm
26
6
3.6
49.0%
P OUT (3.3 V)
48.0%
47.0%
POUT (3 V)
21
46.0%
20
PAE (3.3 V)
19
18
43.0%
PAE (3 V)
20
Noise Figure
16
2
2.44
2.46 2.48
f- Frequency - GHz
2.5
18
2.52
15
2.38
Figure 4.
45.0%
44.0%
17
2.42
3.4
50.0%
23
Gain - dB
Noise Figure - dB
24
2.4
3.2
POUT and PAE
vs
Frequency
(3-V Supply, 0-dBm Input and 3.3-V Supply, +3-dBm Input)
8
2.38
3
VSUPPLY - V
Figure 3.
Figure 2.
3
2.8
PAE - %
30
20.5
Gain - dB
PAE
Current - mA
PAE - %, POUT - dBm, Gain - dB
21.5
42.0%
41.0%
2.4
2.42 2.44 2.46 2.48
f - Frequency - GHz
2.5
40.0%
2.52
Figure 5.
Submit Documentation Feedback
Copyright © 2010–2011, Texas Instruments Incorporated
Product Folder Links: CC2595
5
CC2595
SWRS090A – SEPTEMBER 2010 – REVISED MARCH 2011
www.ti.com
TYPICAL CHARACTERISTICS (continued)
POUT and PAE
vs
Frequency
(Three Temperatures and 3-V Supply, 0-dBm Input)
23
POUT (-40°C)
POUT (27°C)
21
Pout - dBm
20
47.0%
46.0%
POUT (85°C)
19
45.0%
PAE (-40°C)
44.0%
43.0%
18
PAE (27°C)
17
42.0%
16
41.0%
PAE (85°C)
15
14
13
2.38 2.4
PAE - %
22
48.0%
40.0%
39.0%
2.42
2.44 2.46 2.48 2.5
Frequency - GHz
38.0%
2.52
Figure 6.
6
Submit Documentation Feedback
Copyright © 2010–2011, Texas Instruments Incorporated
Product Folder Links: CC2595
PACKAGE OPTION ADDENDUM
www.ti.com
14-Mar-2014
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
CC2595RGTR
ACTIVE
QFN
RGT
16
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 85
C2595
CC2595RGTT
ACTIVE
QFN
RGT
16
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 85
C2595
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
14-Mar-2014
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
13-Mar-2014
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
CC2595RGTR
QFN
RGT
16
3000
330.0
12.4
3.3
3.3
1.1
8.0
12.0
Q2
CC2595RGTT
QFN
RGT
16
250
180.0
12.4
3.3
3.3
1.1
8.0
12.0
Q2
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
13-Mar-2014
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
CC2595RGTR
QFN
RGT
16
3000
338.1
338.1
20.6
CC2595RGTT
QFN
RGT
16
250
210.0
185.0
35.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2015, Texas Instruments Incorporated
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement