Elastic Networks | 405 | Installation guide | Elastic Networks 405 Installation guide

08-01141-01
Elastic Networks
StormPort 405 Modem
Installation Guide
Document Version: Standard
Document Revision: 1.00
Publication Date: September 2000
2
©2000 Elastic Networks
The StormPort 405 Modem Installation Guide is copyrighted and all rights are reserved. This document
may not, in whole or in part, be copied, photocopied, reproduced, translated, or reduced to any electronic
medium or machine readable form without prior consent in writing from Elastic Networks. EtherLoop is
a trademark of Elastic Networks. IBM is the trademark of International Business Machines,
Incorporated; Windows 95, Windows NT and Windows 3.1 are trademarks of Microsoft, Incorporated;
Quadra 610, OS 7.5, Mac, and Macintosh are trademarks of Apple Computer.
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
Elastic Networks
StormPort 405 Modem
Installation Guide
Publication Number: 08-01141-01
Document Version: Standard
Document Revision: 1.00
Publication Date: September 2000
 2000 Elastic Networks
All rights reserved
All information contained in this document is subject to change without notice. Elastic Networks reserves the right to make changes
to equipment design or program components, as progress in engineering, manufacturing methods, or other circumstances may
warrant.
EtherLoop is a trademark of Elastic Networks.
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
iv
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
v
Publication history
September 2000
Standard document released for general publication.
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
vi
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
Contents 7
Contents
About this document
vii
Safety Considerations
StormPort 405 Modem Requirements
vii
viii
Installing the StormPort 405 Modem
1-12
1-12
1-12
1-12
1-13
1-15
1-16
1-16
1-17
Appendix A: Troubleshooting
A-1
Appendix B: Regulatory Information
B-1
FCC Compliance Information
FCC Information to User
Customer Instructions
Industry Canada Compliance Information
Appendix C. Warranty and Disclaimers
Coverage
Exclusions
Revision 1.00
1-11
The StormPort 405 Modem
The StormPort 405 Modem and the EtherLoop System
Always-on Internet connection
Factory-tested components
Materials Included with the StormPort 405 Modem
Task: Installing the Modem
Modem Indicators
Status and Activity Indicators
Additional telephones on the modem phone line
B-1
B-2
B-2
B-4
C-1
C-1
C-2
StormPort 405 Modem Installation Guide
08-01141-01
8 Contents
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
ix
About this document
1-
This document provides instructions for installing, using and troubleshooting
the StormPort 405 Modem. Before installing or using the modem, be sure to
read the Safety Considerations and Modem Requirements in this section.
!
Safety Considerations
The StormPort 405 Modem complies with the regulatory requirements of CSA
C22.2#950-M95 for Canada and UL 1950 Edition 3 for the United States.
Although this product is designed with your complete safety in mind, there are
precautions you should adhere to for your individual safety as well as the safety
of your equipment. These precautions include, but are not limited to the
following:
• Read and understand all instructions.
• Place your modem on a stable surface. Dropping the modem can cause
damage that is not covered under the manufacturer’s warranty.
• Do not disassemble the modem! Opening the unit may expose you to electrical
shock!
• Use caution when installing or modifying telephone lines.
• Do not use modem near water to avoid shock hazard.
• Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
• Never touch uninsulated telephone wires or terminals unless the telephone
line has been disconnected.
• Avoid installing telephone wiring during an electrical storm.
• Do not place objects on top of modem.
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
x About this document
StormPort 405 Modem Requirements
The StormPort 405 Modem has specific requirements. Please insure that all of
the information and equipment is available prior to the installation procedure.
The requirements are as follows:
Requirement
Description
StormPort 405 Modem Service
Once you have purchased the StormPort 405
modem directly or through a distributor, contact
your local Internet service provider (ISP) and
subscribe to high-speed Internet service. Your
modem will not function until the common local
exchange carrier activates the service.
Network Access
A 10Base-T Ethernet Card with a standard RJ-45
connector must be installed and configured in
your computer. Any computer (MAC, PC, UNIX
workstation) that can run Windows 3.1 or higher,
or Mac OS5 or higher can be used with the
StormPort 405 Modem.
Network Address
Internet Protocol (IP) address from your Internet
service provider, corporate IS network
administrator, or hotel front desk. Simply ask for
the IP address requirements for your connection.
Your Internet service provider must use TCP/IP
protocol.
Only one StormPort 405 Modem Only the computer that is directly connected to
per phone line
the StormPort 405 Modem through the 10Base-T
Ethernet cable is supported.
StormPort 405 Modem must be
connected to line one (1) on
multiple line telephone systems
Data transfer rates will vary somewhat,
depending on the speed of your computer, the
network (ISP, corporate, etc.) through which you
are communicating, and the speed and
connection of the computer with which you are
transferring data.
If you need help, call distributor technical support.
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
1-11
Installing the StormPort 405 Modem
1-
This chapter describes the StormPort 405 Modem and contains the installation
procedures for the modem and support equipment.
Chapter contents
This chapter includes the following information.
Table 1-1.
Revision 1.00
Topic
See
The StormPort 405 Modem
page 1-12
Materials Included with the StormPort 405 Modem
page 1-13
Modem Indicators
page 1-16
Additional telephones on the modem phone line
page 1-17
Installing the Ethernet Port
page 1-20
StormPort 405 Modem Installation Guide
08-01141-01
1-12 Installing the StormPort 405 Modem
The StormPort 405 Modem
The StormPort 405 modem is used with an Ethernet-configured PC and an
ordinary phone line to access the Internet or corporate intranet at
multi-megabit speeds. The StormPort 405 permits simultaneous voice (or
analog data) transmission on the same telephone line. The standard telephone
cable provided in the installation kit can be used to connect a telephone, fax,
or answering machine directly to your StormPort 405.
The StormPort 405 is specifically designed to work with the Telematrix
Marquis series phone set. Other phone sets are not configured to work with the
StormPort 405.
This document contains the necessary procedures for installing and using the
StormPort 405StormPort 405.
The StormPort 405 Modem and the EtherLoop System
The StormPort 405 is a component of an EtherLoop system. EtherLoop is an
Elastic Networks technology that supports high-speed data simulaneously
with voice using existing phone lines. If the other network components of the
EtherLoop system have not been correctly installed, the StormPort 405
Modem will not work.
Contact your service provider or distributor technical support if you have
problems completing the installation.
Always-on Internet Connection
The StormPort 405 is a state-of-the-art, high-speed data modem that delivers
an “always-on” connection to a service provider or corporate Information
Service (IS) network. This direct access eliminates the time-consuming
dial-up sequence that is required by other modems and grants immediate
access to the Internet in addition to much faster upload/download speeds.
Factory-tested components
The StormPort 405 has been factory-tested. If you have a problem using the
modem, review the procedures in this guide. Contact your service provider or
distributor technical support if you have questions.
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
Installing the StormPort 405 Modem 1-13
Materials Included with the StormPort 405 Modem
The StormPort 405 contains standard RJ-11 telephone and jack interfaces to
connect the existing voice facility, and a 10Base-T Ethernet RJ-45 interface to
connect the Ethernet cable from the end-user PC.
The following table shows the components included in the StormPort 405
package. If you are missing any item, contact your product distributor for a
replacement.
Table 1 -2. List of Materials.
Description
Item
StormPort 405 Modem
Class 2, 5V, AC Power Supply
Cable Assembly, RJ-11, 6 PIN, 6
Conductor
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
1-14 Installing the StormPort 405 Modem
Task:
Installing the StormPort 405
Note: Some PCs and laptops require an adapter between the RJ-45
Ethernet cable and the Ethernet connector on the PC/laptop (the
adapter is often a round, 8-pin connector).
Step Action
1
2
Make sure all of the StormPort 405 equipment is available before
proceeding.
The StormPort 405 is connected with an RJ-11 modular phone line
cord to the telephone wall jack. Insert one end of the RJ-11 cord into
the telephone wall jack and insert the other end into the jack in the rear
of the StormPort 405, as shown below:
3
Slide the phone set onto the StormPort 405, as shown below:
4
Connect the StormPort 405 to the phone set with the second RJ-11
connector attached to the phone.
The StormPort 405 is connected to the computer with an RJ-45
Ethernet cable (RJ-45 Ethernet cable is not included). Insert one end of
the RJ-45 cable into the 10Base-T Ethernet card connector on the
computer, and the other end into the Ethernet port on the side of the
StormPort 405.
5
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
Installing the StormPort 405 Modem 1-15
6
7
8
If necessary, secure any slack or loose RJ-11 cord using the enclosed
tie clamps.
Connect the rounded plug end of the power supply cord into the 5V AC
connector on the rear of the StormPort 405.
Plug the power supply into wall outlet. This completes the StormPort
405 physical installation. At this point, the Link and Data Status
indicator lights should be green.
Note: See “Modem Indicators” on page 1-16 for more information on
the StormPort 405 LED indicators.
STOP
You have completed this task.
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
1-16 Installing the StormPort 405 Modem
Modem Indicators
Status and Activity Indicators
The side StormPort 405 has two status and activity indicators.
The LINK LED indicates a connection between the StormPort 405 and the
computer has been established. The DATA LED indicates data transfers
between the StormPort 405 and computer are taking place.
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
Installing the StormPort 405 Modem 1-17
Additional telephones on the modem phone line
The StormPort 405 is used to connect a computer and telephone to the same
line, providing simultaneous voice/high-speed data service. Telephones or
answering devices connected directly to the StormPort 405 do not require
external telephone filters. The StormPort 405 has a built-in voiceband filter on
the telephone connection to insure that the signal noise of the data traffic does
not interfere with voice conversations.
However, if there are additional phones (on different jacks) connected to the
same line as the StormPort 405 (extension phones, etc.), an external filter may
be needed.
It is recommended that all filters be installed. Test all additional lines for
correct operation (no data noise) while the StormPort 405 is running and in
service. .
Table 1-3. Telephone Filters
Filter
Description
Use to connect fax machines,
answering machines, and desk
telephones that are not directly
connected to the StormPort 405.
See “Installing the Desk Mount Filter” on
page 1-18.
Desk Mount Filter
Use with wall-mounted telephones.
See “Installing the Wall Mount Filter” on
page 1-19.
Wall Mount Filter
You can order voiceband filters from the StormPort 405product distributor or
service provider.
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
1-18 Installing the StormPort 405 Modem
Task:
Installing the Desk Mount Filter
Follow these instructions precisely to install the Desk Mount Filter. If the
telephone filter is installed incorrectly (reversed), the filter will not allow voice
signals to pass. (See Figure 1-1, Desk Mount Filter Connections.)
Step Action
1
2
Check for a dial tone.
Disconnect the telephone line cord from the wall jack and insert it into the
jack on the desk filter.
3
4
Plug the filter’s “pig tail” end into the wall jack.
Verify there is a dial tone. If a dial tone is not present, check all
connections.
STOP
You have completed this task.
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
Installing the StormPort 405 Modem 1-19
Task:
Installing the Wall Mount Filter
Follow these instructions precisely to install the Wall Mount Filter. If the
telephone filter is installed incorrectly (reversed), the filter will not allow voice
signals to pass. (See Figure 1-2, Wall Mount Filter Installation.)
Step Action
1
Check for a dial tone.
2
Remove the telephone from its wall mount by pushing it upward and pulling
it away from the mounting pins. The telephone may have a short “pig tail” line
cord connecting it to the jack. If the phone has a “pig tail” line cord, disconnect
it from the wall jack.
3
Plug the filter’s short “pig tail” line cord into the wall jack.
4
Install the wall mount filter by placing it over the wall jack and sliding it
downward until it is seated on the mounting pins.
5
Plug the telephone “pig tail” line cord into the jack located on the front of the
filter.
6
Install the telephone on wall mount filter.
7
Verify that there is a dial tone. If a dial tone is not present, check all
connections.
Figure 1-2. Wall Mount Filter Installation
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
1-20 Installing the StormPort 405 Modem
Task:
Installing the Ethernet Port
The Ethernet Port is an Ethernet cable with an RJ-45 plug on one end and an
RJ-45 receptacle in a molded plastic housing on the other, as shown below:
The Ethernet Port is ideally suited for installations where the reach of the
StormPort 405 needs to be extended. The user simply connects to the RJ-45
connector on the Ethernet port rather than the ethernet port on the StormPort
405.
Step Action
1
2
Insert the RJ-45 connector of the Ethernet Port into the ethernet port on
the StormPort 405.
To connect the computer to the Ethernet Port, insert one end of the
RJ-45 network cable into the Ethernet Port plastic housing, and the
other end to the 10Base-T Ethernet card connector on the computer,
STOP
You have completed this task.
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
A-21
Appendix A: Troubleshooting
A-
Table A-1. StormPort 405 Troubleshooting
Problem
Troubleshooting
No Modem
Power/Power Light Off
Make sure there is power to the outlet. Check the
connection to the StormPort 405. (Make sure the
StormPort 405 is plugged in). If the power indicator is not
lit, try another power cord. If the indicator is still not lit,
call distributor technical support.
No data transfer
Check these items in the following order:
1. PC Light is OFF
If connected to a StormPort 405, make sure the
cable between the modem and the back of the
computer is properly connected. If the PC Light
remains off, try another cable. If the indicator is still
not lit, call distributor technical support.
2. Data Light is OFF
This light will briefly blink GREEN when the
computer attempts to send data, and briefly blink
when data is sent to the computer. If it doesn’t light
when the computer sends data, AND the PC Light
is ON, call distributor technical support.
3. Link Light is Off
Check the connection to the network. The light
should be GREEN. If the Link light is YELLOW,
make sure the ELMo shelf has power. If not call
distributor technical support.
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
A-22 Appendix A: Troubleshooting
Table A-1. StormPort 405 Troubleshooting
Problem
Troubleshooting
No data transfer
(continued)
4. Link Light is Red
The StormPort 405 is not receiving any signal from
the Internet service provider. Make sure all
connections are well-connected and the computer
is set up correctly.
Make sure the phone has a clear dial tone. Call your
service provider (phone company). If you are on a
corporate network, contact the network IS
administrator, and make sure the service provider is
having no technical problems. If the noise persists,
call distributor technical support.
5. Link Light is Yellow
The StormPort 405 is trying to synchronize with the
service provider. Make sure the StormPort 405 is at
least 12 inches from the monitor. Wait three
minutes for the light to turn steady GREEN, which
indicates they are synchronized and data should
transfer.
If Link Light doesn’t turn GREEN in three minutes,
call your service provider (phone company). If you
are on a corporate network, contact the network IS
administrator, and make sure the service provider is
having no technical problems. Call distributor
technical support.
6. Data Light Remains Off
Make sure all cables are properly installed and
connected. If the Data Light remains off, call
distributor technical support.
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
Appendix A: Troubleshooting A-23
Table A-1. StormPort 405 Troubleshooting
Problem
Troubleshooting
Noise interference on
the telephone
connected to the
StormPort 405
The StormPort 405 has a built-in filter to prevent this.
The noise could be a faulty line cord, phone, the
StormPort 405, or it could be coming from your phone
service. Try to eliminate these possibilities in the
following order:
1. Disconnect the phone from the StormPort 405 and
connect it directly to the wall jack, bypassing the
modem. Disconnect the StormPort 405 from the wall
jack. If the noise is gone, you should probably solve
the problem by replacing the StormPort 405. If the
noise persists, it may be your phone service.
2. Check your telephone line cords by exchanging
them one at a time with a known good line cord. If
you eliminate the line cords as a possibility, check
the phone unit.
3. If you have a known good spare phone, use it to
replace the suspect phone and reconnect the
StormPort 405. A new phone may eliminate the
noise. If the noise persists, call distributor technical
support.
Low data throughput
rates/It seems to take a
long time to download
files to your computer
File transfer rates depend not only on the StormPort 405,
but also on the speed of your computer, the network that
you are communicating through (ISP, corporate net,
etc.), and the speed and connection of the computer you
are attempting to transfer data to and from.
If you know your files are being transmitted to your
computer with high-speed equipment and your
downloads still seem slow, it’s possible your StormPort
405 is connected to more than one computer.
The StormPort 405 supports only one computer at a
time. Your computer may inadvertently be connected
logically (or physically) into a hub or other network
configuration that looks like multiple computers to the
StormPort 405. Call your corporate IS network
administrator and have any other computers removed
from the StormPort 405.
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
A-24 Appendix A: Troubleshooting
Table A-1. StormPort 405 Troubleshooting
Problem
Troubleshooting
Your PC cannot
First, make sure that all network software applications
communicate with your are properly installed and configured. Double check to
Internet service provider make sure the IP address is correct. Call your telephone
service provider and make sure Modem service is
enabled.
Next, call your ISP help desk. If you are on a corporate
network, call the network IS administrator. Make sure
your service is active and that the network is not
experiencing technical difficulties.
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
B-25
Appendix B: Regulatory Information
B
FCC Compliance Information
Federal Communications Commission
Compliance Information Statement (FCC Rules Section 2.1077)
2.1077 (a) (1) Product identification
Name: StormPort 405 Modem
Product code: 02-00047-01
2.1077 (a) (2) Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
1
This device may not cause harmful interference, and
2
This device must accept any interference receive, including interference
that may cause undesired operation.
2.1077 (a) (3) Responsible Party (FCC 2.909)
Elastic Networks
6120 Windward Parkway, Suite 100
Alpharetta, GA 30005
Phone: 678-297-3100
Fax: 678-297-3110
2.1007 (C) The compliance information statement shall be included in the user
guide or as a separate sheet.
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
B-26 Appendix B: Regulatory Information
FCC Information to User
(FCC Rules Section 15.105(b)):
Note: The StormPort 405 Modem has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio and television reception, which can be determined by
turning the equipment OFF and ON, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Customer Instructions
The Phone Filters comply with part 68 of the FCC Rules. On the back of this
equipment is a designator that contains the FCC registration number and ringer
equivalence for this equipment. If requested, this information must be
provided to the telephone company. The equipment uses the following
standard connections and codes: USOC-RJ-11.
The Phone Filters also comply with part 1950 of the UL certifications, and part
22.2 of the CSA certifications.
The Ringer Equivalence Number (REN) shown on the filter is used to
determine the quantity of devices which may be connected to the telephone
line. Excessive RENs on the telephone line may result in another device not
ringing in response to an incoming call. The sum of the RENs should not
exceed (5). To be certain of the number of devices that may be connected to a
line, as determined by the total RENs, contact the local telephone company.
If the equipment causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of service
may be required. But if advance notice is not practical, the telephone company
will notify the customer as soon as possible. Also, you will be advised of your
right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the operation of the equip-ment. If
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
Appendix B: Regulatory Information B-27
this happens the telephone company will provide advance notice in order for
you to make necessary modifications to maintain uninterrupted service.
If the equipment is causing harm to the telephone network, the telephone
company may request that you disconnect the equipment until the problem is
resolved.
The equipment can not be used on public coin phone service provided by the
telephone company. Connection to party lines is subject to state tariffs.
(contact the state public utility commission, public service commission or
corporation commission for information).
No repairs can be performed by the user. If you experience trouble with this
equipment and/or for repair and warranty information, please contact
distributor technical support.
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
B-28 Appendix B: Regulatory Information
Industry Canada Compliance Information
EMISSIONS:
(Per ICES-003, Issue 2 “Interference-Causing Equipment Standard, Digital
Apparatus”):
This Class B digital apparatus meets all requirements of the Canadian
interference-causing equipment regulations.
Cet Appareil numerique de la Class A respecte toutes les exigences du
reglement sur le materiel brouilleur du Canada.
EQUIPMENT ATTACHMENT LIMITATION
NOTICE: The Industry Canada Label identifies certified equipment. This
certification means that the equipment meets telecommunications network
protective, operational and safety requirements as prescribed in the
appropriate Modem Equipment Technical Requirements document(s). The
department does not guarantee the equipment will operate to the user’s
satisfaction.
Before installing this equipment, users should insure that it is permissible to be
connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection.
The customer should be aware that compliance with the above conditions may
not prevent degradation in service in some situations.
Repairs to certified equipment should be coordinated by a representative
designated by the supplier. Any repairs or alterations made by the user to this
equipment or equipment malfunctions may give the telecommunications
com-pany cause to request the user to disconnect the equipment.
Users should insure for their own protection that the electrical ground
connec-tions of the power utility, telephone lines and internal metallic water
pipe system, if present, are connected together. This precaution may be
particularly important in rural areas. Caution: Users should not attempt to
make such connections themselves, but should contact the appropriate electric
inspection authority, or electrician, as appropriate.
NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal
device provides an indication of the maximum number of terminals allowed to
be connected to a telephone interface. The termination on an interface may
consist of any combination of devices subject only to the requirements that the
sum of the Ringer Equivalence Numbers of all the devices does not exceed five
(5).
Revision 1.00
StormPort 405 Modem Installation Guide
08-01141-01
C-29
Appendix C. Warranty and DisclaimersC
Coverage
Elastic Networks warrants this modem set against defects and malfunctions for
a period of ninety days from the date of original purchase. If there is a defect
or malfunction, Elastic Networks at its option, and as the exclusive remedy,
upon receipt of the defective set will either repair or replace this modem set at
no charge, if returned within the warranty period.
If replacement parts are used in making repairs, these parts may be refurbished
or may contain refurbished materials. If it is necessary to replace the modem,
it may be replaced with a refurbished modem of the same design and color. If
it should become necessary to repair or replace a defective or malfunctioning
modem under this warranty, provisions of this warranty shall apply to the
repaired or replaced modem set until the expiration of ninety (90) days from
the date of pick-up or the date of shipment to you of the repaired or
replacement set or until the end of the original twelve month warranty period,
whichever is later.
Revision 1.00
Storm Port 405 Modem Installation Guide
08-01141-01
C-30 Appendix C. Warranty and Disclaimers
Exclusions
Elastic Networks does not warrant this modem set to be compatible with the
equipment of any particular telephone company. This warranty does not
extend to damage to the product resulting from improper installation or
operation, alteration, or neglect, or abuse, or misuse, fire or natural causes such
as storms or floods after the modem is in your possession.
Elastic Networks shall not be liable for any incidental or consequential
damages, including but not limited to loss, damage, or expense directly or
indirectly arising from the customer's use of or inability to use this modem,
either separately or in combination with other equipment. This paragraph,
however, shall not apply to consequential damages for injury to the person in
the case of modems used or bought for use primarily for personal, family or
household purposes.
This warranty sets forth the entire liability and obligations of Elastic Networks
with respect to breach of war ranty, and the warranties set forth or limited
herein are the sole warranties and are in lieu of all other warranties, ex-pressed
or implied including warranties of fitness for particular purpose and
merchantability.
Revision 1.00
Storm Port 405 Modem Installation Guide
08-01141-01
Elastic Networks
StormPort 405 Modem
Installation Guide
© 2000 Elastic Networks
All rights reserved
The information contained in this document is subject to
change without notice. Elastic Networks reserves the right
to make changes to equipment design or program
components, as progress in engineering, manufacturing
methods, or other circumstances may warrant.
EtherLoop is a trademark of Elastic Networks
Publication Number: 08-01141-01
Document Version: Standard.
Document Revision: 1.00
Publication Date: September 2000
Printed in the United States of America
Download PDF

advertising