Microcomputers SEMICONDUCTOR GENERAL CATALOG

Microcomputers SEMICONDUCTOR GENERAL CATALOG
SEMICONDUCTOR GENERAL CATALOG
Microcomputers
8-Bit Microcontrollers
16-Bit Microcontrollers
32-Bit Microcontrollers
8-Bit Microcontrollers for Automotive
16-Bit Microcontrollers for Automotive
32-Bit Microcontrollers for Automotive
32-Bit Microprocessors
64-Bit Microprocessors
Development System Tools
1
2011/9 SCE0004L
Part Numbering Nomenclature
Example 1
TMP 89 F S 60 x x UG
Package
QG: Plastic shrink quad outline non-leaded package (VQON); dry-packed
XBG: Plastic ball grid array (BGA); dry-packed
WBG: Wafer level chip size package (WCSP), dry-packed
UG, DUG, FG, DFG: Plastic quad flat package (QFP); dry-packed
MG, DMG: Plastic small-outline package (SOP); dry-packed
NG: Plastic shrink dual in-line package (SDIP)
PG: Plastic standard dual in-line package (DIP)
Automotive quality grade
R: Grade A, 40°C to 85°C
T: Grade A, 40°C to 125°C
I: Grade B, 40°C to 85°C
S: Grade B, 40°C to 125°C
Microcontroller revision
Microcontroller subtype
ROM size
KB
1
1
2
2
3
3
4
4
6
6
8
8
C
12
H
16
KB
K
24
M
32
N
40
P
S
U W F
Y
Z
D
48 60/64 96 128 192 256 384 512
ROM type
C: Mask
E: EEPROM
F: Flash
P: OTP
Microcontroller core
86: 870/C
91: 900/L1
95: 900/H
88:
870/X
92, 94: 900/H1
96:
900
89:
93:
870/C1
900/L
Toshiba microcontrollers
Example 2
TMP 19A 23 F Y x x XBG
Package
XBG: Plastic ball grid array (BGA); dry-packed
UG, FG, DFG: Plastic quad flat package (QFP); dry-packed
Automotive quality grade
R: Grade A, 40°C to 85°C
T: Grade A, 40°C to 125°C
I: Grade B, 40°C to 85°C
S: Grade B, 40°C to 125°C
Part designator / Microcontroller
ROM size
KB
H
16
M
32
R
56
S
64
W
128
Y
256
Z
384
D
512
E
10 1D 20
768 1024 1536 2048
ROM type
C: Mask
F: Flash
Microcontroller subtype
Microcontroller core
M3: 03
A9: 09
19A: 19A, 19A/H1
Toshiba microcontrollers
2
2011/9 SCE0004L
8-Bit Microcontrollers
TLCS-870 Family: TLCS-870/C Series
(1) 0.25
(2) 0.5 8
(3) 0.5
1
1
8
1
1
(1) 0.25
8
(2) 0.5
1
8
TMP86FH09AMG
8
TMP86FH09ANG
(1) 0.25
8
(2) 0.5
(3) 0.5
8
TMP86F409NG
TMP86F807MG
TMP86F807NG
8K
256
TMP86F808DMG
TMP86FH12AMG
16K
512
Yes Yes
22
1
6
1
2
Yes Yes
22
1
1
6
1
2
Yes Yes
24
1
1
1
2
Yes Yes
(1) -40 to 85
(2) -40 to 85
(1) 4.5 to 5.5
26
(3) -20 to 85
(2) 3.0 to 5.5
(3) 2.7 to 5.5 (1) -40 to 85
24
(2) -40 to 85
(3) -40 to 85
1
6
1
6
1
2
Yes Yes
1 1
8
1 1 2
Yes Yes
8
1
2
Yes Yes
8
1
2
Yes Yes
TMP86FH92DMG
TMP86FH93NG
(1) 0.25
8
(2) 0.5
8
2
Yes Yes
1
2
Yes Yes
-20 to 85
Yes Yes
39
(1) 0.5
4
(2) 1
32
1
8
1
4
Yes Yes
39
(1) 0.25
4
(2) 0.5
32
1
8
1
4
Yes Yes
39
1
4
Yes Yes
42
(Note3)
1
1
11
1
1
1
16
2
2
Yes Yes
54
(1) 0.25
11
(2) 0.5
1
1
1
16
2
2
Yes Yes
54
12 24
1
1
8
2
2
Ye
Yes Yes
s
54
8
40
1 1
8
1 2
Yes Yes
55
5
32
1 1
8
(1) 0.25
(2) 0.5
(3) 0.5
2048
60
8
(1) 2.7 to 3.6
(2) 1.8 to 3.6
-40 to 85
(1) 4.5 to 5.5
(2) 2.7 to 5.5
-40 to 70
4
Yes Yes
40
1 1
8
2
4
Yes Yes
16
2
4
Yes Yes
56
Yes Yes
(1) 4.5 to 5.5
56
(2) 2.7 to 5.5
13
TMP86FS49BNG
2 2
13
2 2
2 2
1
1
1
16
16
2
4
2
4
Yes Yes
56
TMP86C408DMG
TMP86C808DMG
SSOP30
-
SDIP32
TMP86CH12MG
SSOP30
-
SDIP42
LQFP44
(10×10 mm)
SSOP30
SDIP32
QFP64
(14×14 mm)
TMP86CM29UG
LQFP64
(10×10 mm)
TMP86CM25AFG
QFP100
(14×20 mm)
LQFP64
(10×10 mm)
-40 to 85
TMP86CM27FG
TMP86CP27AFG
QFP80
(14×20 mm)
TMP86CM23AUG
TMP86CP23AUG
LQFP64
(10×10 mm)
TMP86CS28DFG
LQFP80
(12×12 mm)
TMP86CS28FG
QFP80
(14×20 mm)
TMP86CS49FG
QFP64
(14×14 mm)
TMP86CS49UG
Note 1) Configurable as UART or SIO.
Note 2) Minimum instruction execution times (1) to (3) correspond to (1) to (3) of both power supply voltage and operating temperature.
Note 3) Up to 960 LCD segments (60 seg. x 16 com.)
Note 4) Configurable as I2C or UART.
Note 5) The minimum instruction execution time in Low-Speed mode is 122 s (at 32.768 kHz).
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
3
SOP32
TMP86C809NG
TMP86CH09NG
LQFP80
(12×12 mm)
2
(1) 0.25
13
(2) 0.5
SDIP28
-
8
Yes Yes
TMP86C407NG
TMP86C807NG
QFP64
(14×14 mm)
1 1
4 Yes
SOP28
LQFP64
(10×10 mm)
40
1
SDIP32
TMP86C407MG
TMP86C807MG
-
(1) 3.5 to 5.5
51 (2) 3.0 to 5.5
(3) 2.7 to 5.5 (1) -40 to 85
(2) -40 to 85
62 (1) 4.0 to 5.5
(3) -40 to 85
(2) 3.0 to 5.5
62 (3) 2.7 to 5.5
TMP86FS49BFG
TMP86FS49BUG
Yes Yes 24 (1) 4.0 to 5.5
Yes Yes 26 (2) 2.7 to 5.5
4
TMP86FS23AUG
TMP86FS28AFG
1
6
1
1024
60K
6
1 1
-40 to 85
8
48K
TMP86FS28ADFG
1
1
-
TMP86CH46ANG
(1) 4.5 to 5.5
35 (2) 2.7 to 5.5
1
4
TMP86FS27FG
1
1
33
32
TMP86FM48FG
TMP86FP24FG
1
-40 to 85
26
4
TMP86FM25FG
TMP86FM48UG
I/O Port (Pins)
2
1 1
2048
Voltage Detecting Circuit
1
1 1
32K
Power-On Reset
6
(1) 4.5 to 5.5
(2) 2.7 to 5.5
Package
for operating
conditions.)
(1) 4.5 to 5.5 (1) -40 to 85
26 (2) 3.0 to 5.5 (2) -40 to 85
(3) 2.7 to 5.5 (3) -20 to 85
19
TMP86FM29UG
Operating
Temperature
(See the datasheet
(°C)
Yes Yes
19
1536
Mask ROM
Version
2
TMP86FH47BUG
TMP86FM29LUG
Power
Supply
Voltage
(V)
1
6
TMP86FH46BNG
TMP86FM29FG
Clock Gear
VFT Driver (Ch)
SEI (ch)
SIO (ch)
UART (ch)
UART/SIO (ch) (Note 1)
UART/I2C (ch) (Note 4)
I2C (ch)
8-Bit AD Converter (Ch)
10-Bit AD Converter (Ch)
8-Bit DA Converter (Ch)
18-Bit Timer/Counter (Ch)
16-Bit Timer/Counter (Ch)
10-Bit Timer/Counter (Ch)
8-Bit Timer/Counter (Ch)
Multiply-Accumulate (MAC)
Program Patch Logic
Watchdog Timer
Dual Clocks
(Low-Speed Mode (Note 5))
512
LED Driver (Ch)
RAM (Bytes)
4K
LCD Driver (Ch)
ROM (Bytes)
Part Number
Minimum Instruction Execution
Time (s) (Note 2)
□Flash Versions
2011/9 SCE0004L
SDIP64
LQFP64
(10×10 mm)
TLCS-870 Family: TLCS-870/X Series
TMP88F846UG
8K
16
512
TMP88FH41UG
16K
TMP88FW45AFG
120K 4096
0.2
16
24
(Note 1) (Note 1)
1
1
(Note 1) (Note 1)
1
1
1
2
2
Yes
I/O Port (Pins)
Oscillation Frequency Detector
Internal Oscillator
Dual Clocks (Low-Speed Mode)
Watchdog Timer
Program Patch Logic
Remote Control Preprocessor
16-Bit Timer/Counter (Ch)
8-Bit Timer/Counter (Ch)
Motor Controller (Ch)
10-Bit AD Converter (Ch)
8-Bit AD Converter (Ch)
I2C (Ch)
PWM Generator (Ch)
UART (Ch)
SIO (Ch)
VFT Driver (Ch)
RAM (Bytes)
ROM (Bytes)
Part Number
Minimum Instruction Execution
Time (s)
LED Driver (Ch)
□Flash Versions
8
2
2
1
Yes
8
2
2
1
Yes
33
16
2
4
2
Yes
Yes 71
Power
Supply
Voltage
(V)
Mask ROM Version
Operating
Temperature
(See the datasheet for
(°C)
operating conditions.)
33
4.5 to 5.5
-40 to 85
TMP88CH41UG
-
Note 1) Cannot be used at the same time because their I/O pins are multiplexed.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
4
Package
2011/9 SCE0004L
LQFP44
(10×10 mm)
QFP80
(14×20 mm)
TLCS-870 Family: TLCS-870/C1 Series
TMP89FH40NG
TMP89FH42LUG
16K
TMP89FH46DUG
Internal Oscillator
I/O Port (Pins) (Note 6)
On-Chip Debug Unit (Note 2)
Voltage Detecting Circuit
Power-On Reset
Power
Supply
Voltage
(V)
6
(1) 0.238
(2) 0.5
8
1 1 1
8
2
4
Yes
Yes
Yes Yes Yes Yes
(Note 5)
40 (1) 2.7 to 3.6
(2) 2.2 to 3.6
8
1 1 1
8
2
4
Yes
Yes
Yes Yes Yes Yes
40
8
1 1 1
8
2
4
Yes
Yes
Yes Yes Yes Yes
1 1 1
8
2
4
Yes
Yes
Yes Yes Yes Yes
TMP89FH46LDUG
(1) 0.238
(2) 0.5
8
1 1 1
8
2
4
Yes
Yes
Yes Yes Yes Yes
TMP89FM40NG
(1) 0.1
(2) 0.238
(3) 0.5
6
1 1 1
8
2
4
Yes
Yes
Yes Yes Yes Yes
36
TMP89FM42AUG
(1) 0.1
(2) 0.19
(3) 0.5
8
1 1 1
8
2
4
Yes
Yes
Yes Yes Yes Yes Yes 40
TMP89FM42KUG
(1) 0.19
(2) 0.5
8
1 1 1
8
2
4
Yes
Yes
Yes Yes Yes Yes Yes 40
TMP89FM42LUG
(1) 0.238
(2) 0.5
8
1 1 1
8
2
4
Yes
Yes
Yes Yes Yes Yes
40
TMP89FM42UG
(1) 0.1
(2) 0.238
(3) 0.5
8
1 1 1
8
2
4
Yes
Yes
Yes Yes Yes Yes
(1) 4.3 to 5.5
40 (2) 2.7 to 5.5
(3) 2.2 to 5.5
(1) 0.19
(2) 0.5
8
1 1 1
8
2
4
Yes
Yes
Yes Yes Yes Yes Yes 38
TMP89FM43KQG
32K
8
2
4
Yes
Yes
Yes Yes Yes Yes
TMP89FM46ADUG
(1) 0.1
(2) 0.19
(3) 0.5
8
1 1 1
8
2
4
Yes
Yes
Yes Yes Yes Yes Yes 42
TMP89FM46DUG
(1) 0.1
(2) 0.238
(3) 0.5
8
1 1 1
8
2
4
Yes
Yes
Yes Yes Yes Yes
TMP89FM46KDUG
(1) 0.19
(2) 0.5
8
1 1 1
8
2
4
Yes
Yes
Yes Yes Yes Yes Yes 42 (1) 2.7 to 3.6
TMP89FM82DUG
0.125
20
1
8
2
4
Yes
Yes
Yes Yes Yes Yes
39
TMP89FS28LFG
(1) 0.167
(2) 0.25
(3) 0.5
TMP89FW24ADFG
TMP89FW24AFG
3072
124K
-
LQFP44
(10×10 mm)
TMP89CM42UG
(Note 7)
(1) 2.7 to 3.6
(2) 2.2 to 3.6
1 1 1
TMP89FS60UG
TMP89FW20AUG
SDIP42
-40 to 85
8
(1) 0.125
(2) 0.238
(3) 0.238
LQFP48
(7×7 mm)
(Note 5)
38 (1) 2.7 to 3.6
(2) 2.2 to 3.6
42
LQFP44
(10×10 mm)
TMP89CH46DUG
(1) 2.7 to 3.6
(2) 2.2 to 3.6
(1) 0.238
(2) 0.5
60K
TMP89CH42UG
(Note 7)
(1) 4.3 to 5.5
(2) 2.7 to 5.5
(3) 2.2 to 5.5
TMP89FM43LQG
TMP89FS60FG
SDIP42
-
(1) 4.3 to 5.5
(2) 2.7 to 5.5
42 (3) 2.2 to 5.5
(Note 5)
42 (1) 2.7 to 3.6
(2) 2.2 to 3.6
2048
Mask ROM Version
Operating
Package
Temperature
(See the datasheet for
(°C)
operating conditions.)
(1) 4.3 to 5.5
36 (2) 2.7 to 5.5
(3) 2.2 to 5.5
(1) 0.1
(2) 0.238
(3) 0.5
(1) 0.1
(2) 0.238
(3) 0.5
TMP89FH42UG
LED Driver (Ch)
LCD Driver (Ch)
SEI (Ch)
SIO (Ch)
UART (Ch)
UART/SIO (Ch) (Note 1)
I2C/SIO (Ch) (Note 1)
8-Bit AD Converter (Ch)
10-Bit AD Converter (Ch)
8-Bit DA Converter (Ch)
18-Bit Timer/Counter (Ch)
16-Bit Timer/Counter (Ch)
10-Bit Timer/Counter (Ch)
8-Bit Timer/Counter (Ch)
Multiply-Accumulate (MAC)
Program Patch Logic
Watchdog Timer
Dual Clocks
(Low-Speed Mode (Note 4))
Clock Gear
RAM (Bytes)
ROM (Bytes)
Part Number
Minimum Instruction Execution Time
(s) (Note 3)
□Flash Versions
-
(1) 4.3 to 5.5
(2) 2.7 to 5.5
(3) 2.2 to 5.5
TMP89CM46DUG
VQON44
(5.3×5.3
mm)
LQFP48
(7×7 mm)
(Note 5)
(2) 2.2 to 3.6
80 2
8
8
4.5 to 5.5
1 1
8
2
4
Yes
Yes
Yes Yes Yes Yes
(1) 3.2 to 3.6
53 (2) 2.7 to 3.6
(3) 2.2 to 3.6
1 2 1
16
2
4
Yes
Yes
Yes Yes Yes Yes
58
1 2 1
(1) 4.3 to 5.5 (1) -40 to 85
(2) 3.0 to 5.5 (2) -40 to 85
58 (3) 2.7 to 3.0 (3) -20 to 85
16
2
4
Yes
Yes
Yes Yes Yes Yes
7 32
1 3
1
8
2 1 4
Yes
Yes
Yes Yes Yes Yes Yes 52
(1) 0.0625 11 40
(2) 0.125
1 3
1
8
2 1 4
Yes
Yes
Yes Yes Yes Yes Yes 68 (1) 2.7 to 5.5
11 40
1 3
(2) 1.8 to 5.5
1
8
2 1 4
Yes
Yes
LQFP53
(20×20 mm)
-
-40 to 85
LQFP64
(10×10 mm)
QFP80
(14×20 mm)
LQFP80
(12×12 mm)
Yes Yes Yes Yes Yes 68
Note 1) Configurable as UART or SIO. Also, selectable from I2C and SIO.
One SIO channel can be used simultaneously. As for the TMP89FS60, up to two SIO channels can be used simultaneously.
Note 2) The on-chip debug unit is available with the flash versions, but not with the mask ROM versions.
Note 3) Minimum instruction execution times (1) to (3) correspond to (1) to (3) of both power supply voltage and operating temperature.
Note 4) The minimum instruction execution time in Low-Speed mode is 122 s (at 32.768 kHz).
Note 5) The erase/program power supply voltage is 3.0 to 3.6 V.
Note 6) Two ports are reserved for high-speed oscillator pins and cannot be used as I/O ports.
Note 7) The AD conversion accuracy differs between the flash and mask ROM versions. For details, see the datasheet.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
5
QFP64
(14×14 mm)
2011/9 SCE0004L
TLCS-870 Family: TLCS-870/C Series
I/O Port (Pins)
Clock Gear
Watchdog Timer
Dual Clocks
(Low-Speed Mode (Note 5))
1.6
Program Patch Logic
Minimum Instruction Execution
Time (s) (Note 3)
128
Multiply-Accumulate (MAC)
RAM (Bytes)
TMP86P203MG (Note 2)
2K
TMP86P203PG (Note 2)
Part Number
LED Driver (Ch)
LCD Driver (Ch)
VFT Driver (Ch)
SEI (Ch)
SIO (Ch)
UART (Ch)
UART/SIO (Ch) (Note 1)
UART/I2C (Ch) (Note 4)
I2C (Ch)
8-Bit AD Converter (Ch)
10-Bit AD Converter (Ch)
8-Bit DA Converter (Ch)
18-Bit Timer/Counter (Ch)
16-Bit Timer/Counter (Ch)
10-Bit Timer/Counter (Ch)
8-Bit Timer/Counter (Ch)
ROM (Bytes)
□Mask ROM Versions
2
4
2
Yes
14
2
4
2
Yes
14
TMP86C407MG
8
1
1
6
1
2
Yes Yes
22
TMP86C407NG
(1) 0.25
8
(2) 0.5
1
1
6
1
2
Yes Yes
22
8
1
1
6
1
2
Yes Yes
24
TMP86C408DMG
4K
TMP86C420FG
(1) 0.25 4 32
(2) 0.5
(3) 0.95 4 32
TMP86C420UG
Power
Supply
Voltage
(V)
OTP/Flash Version
Operating
Temperature
(See the datasheet for
(°C)
operating conditions.)
4.5 to 5.5
-
(1) 4.5 to 5.5
(2) 2.7 to 5.5
SOP28
SDIP28
TMP86P808DMG
TMP86F808DMG
SSOP30
1
2
Yes Yes
2
Yes Yes
TMP86C807NG
(1) 0.25
8
(2) 0.5
1
1
6
1
2
Yes Yes
(1) 4.5 to 5.5
22
(2) 2.7 to 5.5
8
1
1
6
1
2
Yes Yes
24
TMP86C820UG
8K
(1) 0.25
8
(2) 0.5
TMP86C809NG
TMP86C829BFG
1
8
1
2
Yes Yes
1
8
1
2
Yes Yes
39 (1) 4.5 to 5.5
(2) 2.7 to 5.5
39 (3) 1.8 to 5.5
2
Yes Yes
26
1
1
4 32
(1) 0.25
4 32
(2) 0.5
(3) 0.95
TMP86C829BUG
TMP86C847UG
19
1
6
1
1
8
1
4
Yes Yes
39
1
8
1
4
Yes Yes
39
2
Yes Yes
35
1
8
1
(1) 4.5 to 5.5
(2) 2.7 to 5.5
(3) 1.8 to 5.5
TMP86CH06AUG
1
1
1
2
(1) 4.5 to 5.5
(2) 2.7 to 5.5
Yes Yes Yes 35
(3) 2.0 to 5.5
(4) 1.8 to 5.5
TMP86CH06NG
(1) 0.25
(2) 0.5 8
(3) 0.95
1
1
1
2
(1) 4.5 to 5.5
Yes Yes Yes 35 (2) 2.7 to 5.5
(3) 1.8 to 5.5
512
(1) 0.25 8
(2) 0.5 8
1
1
1
6
1
1
8
1
1
2
Yes Yes
2
Yes Yes
Yes Yes
TMP86CH21FG
(1) 0.25
(2) 0.5 4 32
(3) 0.95
1
8
1
4
Yes Yes
(1) 4.5 to 5.5
39 (2) 2.7 to 5.5
(3) 1.8 to 5.5
TMP86CH22UG
3 23
4
1
2
Yes Yes
33
TMP86CH47AUG
19
1
1
8
1
2
Yes Yes
1
1
8
1
2
Yes Yes
SDIP32
TMP86PM29BFG
QFP64
(14×14 mm)
TMP86PM29BUG
LQFP64
(10×10 mm)
TMP86PM47AUG
TMP86PH47UG
TMP86FH47BUG
(1) -40 to 85
(2) -40 to 85
TMP86PH06UG
(3) -40 to 85
(4) -20 to 85
TMP86PH06NG
SDIP42
-40 to 85
(1) 4.5 to 5.5
33 (2) 2.7 to 5.5
(3) 2.0 to 5.5
(4) 1.8 to 5.5
35
-40 to 85
(1) -40 to 85
(2) -40 to 85
(3) -40 to 85
(4) -20 to 85
LQFP64
(10×10 mm)
TMP86PM29BFG
QFP64
(14×14 mm)
TMP86PH22UG
LQFP44
(10×10 mm)
TMP86PH46NG
TMP86PM46NG
TMP86FH46BNG
SDIP42
TMP86PM47AUG
TMP86PH47UG
TMP86FH47BUG
LQFP44
(10×10 mm)
Note 1) Configurable as UART or SIO.
Note 2) Contains an OTP memory.
Note 3) Minimum instruction execution times (1) to (4) correspond to (1) to (4) of both power supply voltage and operating temperature.
Note 4) Configurable as I2C or UART.
Note 5) The minimum instruction execution time in Low-Speed mode is 122 s (at 32.768 kHz).
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
6
LQFP44
(10×10 mm)
(1) -40 to 85
(2) -40 to 85
TMP86PM29BUG
(3) -40 to 85
(4) -20 to 85
4
(1) 0.25
(2) 0.5 19
(3) 0.95
(4) 0.95
TMP86FH09ANG
SDIP32
1
TMP86CH46ANG
LQFP64
(10×10 mm)
SSOP30
8
1
TMP86P820UG
TMP86FH12AMG**
1
1
QFP64
(14×14 mm)
TMP86FH09ANG
(1) 4.5 to 5.5
(2) 2.7 to 5.5
39
(3) 2.0 to 5.5
(4) 1.8 to 5.5
16K
TMP86P820FG
26 (1) 4.5 to 5.5
24 (2) 2.7 to 5.5
(1) 0.25
(2) 0.5
4 32
(3) 0.95
(4) 0.95
TMP86CH21AUG
-40 to 85
(1) 4.5 to 5.5
(2) 2.7 to 5.5
(1) 0.25
(2) 0.5
8
(3) 0.95
(4) 0.95
TMP86CH09NG
TMP86CH12MG
SSOP30
TMP86P807NG
TMP86F807NG
8
8
(1) 0.25 4 32
(2) 0.5
(3) 0.95 4 32
TMP86P808DMG
TMP86F808DMG
TMP86P807MG
TMP86F807MG
1
39 (1) 4.5 to 5.5
(2) 2.7 to 5.5
39 (3) 1.8 to 5.5
256
TMP86C820FG
SDIP28
22
Yes Yes
TMP86C807MG
TMP86C808DMG
TMP86P807NG
TMP86F807NG
LQFP64
(10×10 mm)
2
1
SOP28
TMP86P820UG
1
6
DIP20
TMP86P807MG
TMP86F807MG
QFP64
(14×14 mm)
8
1
SOP20
TMP86P820FG
1
1
Package
2011/9 SCE0004L
TMP86CH72FG
TMP86CH29BFG
1536
(1) 0.25 4
(2) 0.5
4
(3) 0.95
1024
(1) 0.25
(2) 0.5
TMP86CM23AUG
(1) 0.25
(2) 0.5
5
(3) 0.95
(4) 0.95
1536
TMP86CM29BFG
TMP86CM29BUG
TMP86CM29LUG
TMP86CM25AFG
32
32
TMP86CS49UG
TMP86CS64AFG
8
1
1
8
1
1
Yes Yes
1
2
Yes Yes
1
2
Yes Yes Yes
8
1
4 Yes
Yes Yes
I/O Port (Pins)
Watchdog Timer
Dual Clocks
(Low-Speed Mode (Note 5))
Clock Gear
Program Patch Logic
2
1
6
Multiply-Accumulate (MAC)
Yes Yes
70
-30 to 70
(1) 4.5 to 5.5
55 (2) 2.7 to 5.5
(1) 4.5 to 5.5
35 (2) 2.7 to 5.5
(3) 1.8 to 5.5
54
(1) 4.5 to 5.5
(2) 2.7 to 5.5
(1) 3.5 to 5.5
(2) 2.7 to 5.5
51
(3) 2.0 to 5.5
(4) 1.8 to 5.5
32
1
8
1
4
Yes Yes
(1) 4.5 to 5.5
(2) 2.7 to 5.5
39 (3) 1.8 to 5.5
4
32
1
8
1
4
Yes Yes
39
1
4
Yes Yes
(1) 2.7 to 3.6
42 (2) 1.8 to 3.6
2
Yes Yes
70
2
Yes Yes
4
(Note 2)
(1) 0.25
19
(2) 0.5
TMP86CS49FG
2
-40 to 85
Yes Yes
1024
(1) 0.25
4
(2) 0.5
(3) 0.95
4
(4) 0.95
2048
1
1
Yes Yes
2
1
1
4
39 (1) 4.5 to 5.5
(2) 2.7 to 5.5
39
(3) 1.8 to 5.5
4
TMP86CS44UG
60K
8
Yes Yes
-30 to 70
1
2048
TMP86CS28FG
1
4
(1) 0.25
(2) 0.5
(1) 0.25
13
(2) 0.5
(3) 0.95
13
(4) 0.95
(1) 0.25
16
(2) 0.5
1
37
32
(Note 2)
60
(Note 2)
60
1
8
1
1
8
1
2
8
1
1
8
1
1
8
1
1
1
2
(1) 4.5 to 5.5
55 (2) 2.7 to 5.5
4 Yes
Yes Yes
2
Yes Yes
35
42
1
8
1
4
Yes Yes
1
1
8
1
4
Yes Yes
(1) 4.5 to 5.5
(2) 2.7 to 5.5
(3) 2.0 to 5.5
42
(4) 1.8 to 5.5
40
1
1
8
2
4
Yes Yes
62
40
1
1
8
2
4
Yes Yes
62
56
2
2
1
16
2
4
Yes Yes
2
2
1
16
2
4
Yes Yes
2
1
16
2
4
Yes Yes
(1) 4.5 to 5.5
(2) 2.7 to 5.5
(1) 4.0 to 5.5
(2) 2.7 to 5.5
(1) 4.5 to 5.5
(2) 2.7 to 5.5
(3) 2.0 to 5.5
56
(4) 1.8 to 5.5
91
(1) 4.5 to 5.5
(2) 2.7 to 5.5
TMP86PM72FG
TMP86PM29BFG
TMP86PM29BUG
TMP86PM74AFG
TMP86PS27FG
TMP86FS27FG
-40 to 85
-30 to 70
QFP64
(14×14 mm)
LQFP64
(10×10 mm)
QFP80
(14×20 mm)
TMP86PM47AUG
LQFP44
(10×10 mm)
TMP86PM72FG
QFP64
(14×14 mm)
LQFP64
(10×10 mm)
TMP86PM29BFG
QFP64
(14×14 mm)
-40 to 85
TMP86PM29BUG
TMP86FM29UG
TMP86FM25FG
-30 to 70
TMP86PM74AFG
-40 to 85
TMP86PS27FG
TMP86FS27FG
(1) -40 to 85
(2) -40 to 85 TMP86PS23UG
(3) -40 to 85 TMP86FS23AUG
(4) -20 to 85
-40 to 85
TMP86PS44UG
(1) -40 to 85
(2) -40 to 85
(3) -40 to 85
TMP86PS25FG
(4) -20 to 85
QFP100
(14×20 mm)
QFP80
(14×20 mm)
LQFP64
(10×10 mm)
LQFP44
(10×10 mm)
LQFP100
(14×14 mm)
QFP100
(14×20 mm)
LQFP80
(12×12 mm)
TMP86FS28AFG
QFP80
(14×20 mm)
-40 to 85
(1) -40 to 85
TMP86FS49BFG
(2) -40 to 85
(3) -40 to 85
TMP86FS49BUG
(4) -20 to 85
-40 to 85
LQFP64
(10×10 mm)
TMP86FS28ADFG
TMP86PS64FG
Note 1) Configurable as UART or SIO.
Note 2) Up to 960 LCD segments (60 seg. x 16 com.)
Note 3) Minimum instruction execution times (1) to (4) correspond to (1) to (4) of both power supply voltage and operating temperature.
Note 4) Configurable as I2C or UART.
Note 5) The minimum instruction execution time in Low-Speed mode is 122 s (at 32.768 kHz).
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
7
Package
(1) -40 to 85
(2) -40 to 85 TMP86PM23UG
(3) -40 to 85 TMP86FS23AUG
(4) -20 to 85
39
(1) 3.5 to 5.5
(2) 2.7 to 5.5
51
(3) 2.0 to 5.5
(4) 1.8 to 5.5
1
OTP/Flash
Version
Operating
Temperature
(See the datasheet for
(°C)
operating conditions.)
(1) 4.5 to 5.5
(2) 2.7 to 5.5
54
8
TMP86CP23AUG
TMP86CS28DFG
8
1
1
1
Yes Yes Yes
1
(1) 0.25
(2) 0.5
5
(3) 0.95
(4) 0.95
TMP86CS25AFG
8
2
32
40
TMP86CS25ADFG
1
(1) 0.25
4
(2) 0.5
(3) 0.95 4
8
48K
6
1
40
1024
TMP86CP27AFG
1
1
37
60
TMP86CM74AFG
1
32
(1) 0.25
(2) 0.5 2
2048
1
32
(1) 0.25
(2) 0.5 19
(3) 0.95
TMP86CM72FG
32K
VFT Driver (Ch)
SEI (Ch)
SIO (Ch)
UART (Ch)
UART/SIO (Ch) (Note 1)
UART/I2C (Ch) (Note 4)
I2C (Ch)
8-Bit AD Converter (Ch)
10-Bit AD Converter (Ch)
8-Bit DA Converter (Ch)
18-Bit Timer/Counter (Ch)
16-Bit Timer/Counter (Ch)
10-Bit Timer/Counter (Ch)
8-Bit Timer/Counter (Ch)
32
2
(1) 0.25
(2) 0.5 8
TMP86CM27FG
LCD Driver (Ch)
LED Driver (Ch)
(1) 0.25
(2) 0.5
24K
TMP86CM47AUG
Minimum Instruction Execution
Time (s) (Note 3)
1024
16K
TMP86CH29BUG
TMP86CK74AFG
RAM (Bytes)
ROM (Bytes)
Part Number
Power
Supply
Voltage
(V)
2011/9 SCE0004L
QFP64
(14×14 mm)
LQFP64
(10×10 mm)
QFP100
(14×20 mm)
TLCS-870 Family: TLCS-870/X Series
16K
0.2
1
16
TMP88CS43FG
24
1
1
(Note2) (Note2)
1
1
1
1
2
Watchdog Timer
Dual Clocks
(Low-Speed Mode (Note 4))
I/O Port (Pins)
Remote Control Preprocessor
4
1
2
1
Yes
19
TMP88PH40MG
SOP28
4
1
2
1
Yes
19
TMP88PH40NG
SDIP28
8
2
2
1
Yes
33
TMP88PH41NG
SDIP42
8
2
2
1
Yes
33
TMP88PH41UG
TMP88FH41UG
LQFP44
(10×10 mm)
16
2
4
2
Yes
71
TMP88PS43FG
QFP80
(14×20 mm)
TMP88PU77FG
QFP100
(14×20 mm)
TMP88PU74FG
QFP80
(14×20 mm)
TMP88PU77FG
QFP100
(14×20 mm)
Program Patch Logic
8-Bit AD Converter (Ch)
I2C (Ch) (Note 1)
PWM Generator (Ch)
UART (Ch)
1
(Note2) (Note2)
16
TMP88CH41UG
SIO (Ch)
(Note2) (Note2)
512
TMP88CH41NG
1
Motor Controller (Ch)
14
1
8-Bit Timer/Counter (Ch)
TMP88CH40NG
(Note2) (Note2)
16-Bit Timer/Counter (Ch)
14
10-Bit AD Converter (Ch)
TMP88CH40MG
VFT Driver (Ch)
LED Driver (Ch)
RAM (Bytes)
ROM (Bytes)
Part Number
Minimum Instruction Execution
Time (s) (Note 3)
□Mask ROM Versions
Power Supply Operating
Voltage
Temperature
(V)
(°C)
4.5 to 5.5
-40 to 85
OTP/Flash Version
(See the datasheet for
operating conditions.)
64K
TMP88CS77FG
2048
(1) 0.32
(2) 122
TMP88CU74FG
96K
TMP88CU77FG
3072
53
2
1
12
3
1
Yes Yes 88
37
1
1
12
2
2
Yes Yes 71
53
2
1
12
3
1
Yes Yes 88
(1) 4.5 to 5.5
(2) 2.7 to 5.5
-30 to 70
Note 1) Either I2C bus or SIO module can be selected via software.
Note 2) Cannot be used at the same time because their I/O pins are multiplexed.
Note 3) Minimum instruction execution times (1) and (2) correspond to power supply voltages (1) and (2).
Note 4) The minimum instruction execution time in Low-Speed mode is 122 s (at 32.768 kHz).
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
8
2011/9 SCE0004L
Package
TLCS-870 Family: TLCS-870/C1 Series
TMP89CH42UG
Voltage Detecting Circuit
I/O Port (Pins) (Note 4)
Power-On Reset
LED Driver (Ch)
LCD Driver (Ch)
VFT Driver (Ch)
SEI (Ch)
SIO (Ch)
UART (Ch)
UART/SIO (Ch) (Note 1)
I2C/SIO (Ch) (Note 1)
8-Bit AD Converter (Ch)
10-Bit AD Converter (Ch)
8-Bit DA Converter (Ch)
18-Bit Timer/Counter (Ch)
16-Bit Timer/Counter (Ch)
10-Bit Timer/Counter (Ch)
8-Bit Timer/Counter (Ch)
Multiply-Accumulate (MAC)
Program Patch Logic
Watchdog Timer
Dual Clocks
(Low-Speed Mode (Note 3))
Clock Gear
RAM (Bytes)
ROM (Bytes)
Part Number
Minimum Instruction Execution
Time (s) (Note 2)
□Mask ROM Versions
Power
Supply
Voltage
(V)
Flash Version
Operating
Temperature (See the datasheet
(°C)
for operating
conditions.)
8
1 1 1
8
2
4
Yes Yes Yes Yes Yes 40
TMP89FH42UG
LQFP44
(10×10 mm)
8
1 1 1
8
2
4
TMP89FH46DUG
LQFP48
(7×7 mm)
8
1 1 1
8
2
4
Yes Yes Yes Yes Yes 42 (1) 4.3 to 5.5
(2) 2.7 to 5.5
Yes Yes Yes Yes Yes 40 (3) 2.2 to 5.5
TMP89FM42UG
LQFP44
(10×10 mm)
8
1 1 1
8
2
4
Yes Yes Yes Yes Yes 42
TMP89FM46DUG
LQFP48
(7×7 mm)
16K
TMP89CH46DUG
2048
TMP89CM42UG
(1) 0.1
(2) 0.238
(3) 0.5
-40 to 85
32K
TMP89CM46DUG
Package
Note 1) Configurable as UART or SIO. Also, selectable from I2C and SIO.
One SIO channel can be used simultaneously.
Note 2) Minimum instruction execution times (1) to (3) correspond to power supply voltages (1) to (3).
Note 3) The minimum instruction execution time in Low-Speed mode is 122 s (at 32.768 kHz).
Note 4) Two ports are reserved for high-speed oscillator pins and cannot be used as I/O ports.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
9
2011/9 SCE0004L
16-Bit Microcontrollers
TLCS-900 Family: TLCS-900/L1 Series
TMP91FU62DFG
96K
TMP91FU62FG
(1) 0.148
(2) 0.25
TMP91FW64DFG
8192
(1) 0.16
(2) 0.25
128K
TMP91FW27FG
Program Patch Logic(Bank)
I/O Port (Pins)
Clock Gear
Dual Clocks
8-Bit Timer/Counter (Ch)
16-Bit Timer/Counter (Ch)
Motor Controller (Ch)
32-kHz Timer (for S/W RTC)
RTC (Ch)
8-Bit PWM Generator (Ch)
CS/WAIT Controller (Ch)
Watchdog Timer
LCD Driver (Ch)
I2C/SIO (Ch)
I2C (Ch)
DRAM Controller (Ch)
10-Bit AD Converter (Ch)
3
1
16
4
4
Yes
Yes Yes Yes 6
8
3
1
16
4
4
Yes
Yes Yes Yes 6
4
3
69
4
TMP91FW27UG
256K 16384
(1) 0.148
(2) 0.25
0.148
4
(Note 2)
40
1
Yes Yes
6 61
3
2
16
6
5
Yes
4 Yes Yes Yes 6
3
2
16
6
5
Yes
4 Yes Yes Yes 6
4
6
1
Yes
4 Yes Yes Yes
2
12288
TMP91FY42FG
8
0.2
4096
TMP91FW40FG
TMP91FW64FG
LED Driver (Ch)
UART/SIO (Ch)
SIO (Ch)
RAM (Bytes)
ROM (Bytes)
Part Number
Minimum Instruction Execution
Time (s) (Note 1)
□Flash Versions
1
2
1
4
6
1
Yes
4 Yes Yes Yes
2
1
8
8
2
Yes
4 Yes Yes Yes
Power
Supply
Voltage
(V)
Mask ROM Version
Operating
Temperature (See the datasheet
(°C)
for operating
conditions.)
4.5 to 5.5
-
(1) 2.7 to 3.6
(2) 2.2 to 3.6
(1) 4.5 to 5.5
83
(2) 2.7 to 5.5
53
(1) 2.7 to 3.6
(2) 2.2 to 3.6
81
2.7 to 3.6
TMP91CW40FG
-40 to 85
QFP80
(14×20 mm)
LQFP80
(12×12 mm)
LQFP100
(14×14 mm)
-
QFP100
(14×20 mm)
-
LQFP100
(14×14 mm)
TMP91CU27FG
QFP64
(14×14 mm)
TMP91CK27UG
TMP91CP27UG
TMP91CU27UG
LQFP64
(10×10 mm)
TMP91CY22FG
TMP91CW12AFG
LQFP100
(14×14 mm)
Note 1) Minimum instruction execution times (1) and (2) correspond to power supply voltages (1) and (2).
Note 2) For the 4-common and 40-segment LCD driver specification, see the technical datasheet.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
10
Package
2011/9 SCE0004L
TLCS-900 Family: TLCS-900/L1 Series
TMP91C016FG
TMP91C219FG
NA
NA
TMP91C630FG
2048
(1) 0.148
(2) 0.4
1
0.111
6144
TMP91C820AFG
8K
8192
TMP91CK27UG
TMP91CP27UG
24K
1024
48K
4096
TMP91CU10FG
TMP91CU27FG
(1) 0.111
(2) 0.148
(1) 0.148
(2) 0.4
3072
(1) 0.296
(2) 0.4
10240
(1) 0.148
(2) 0.4
96K
TMP91CU27UG
1
1 Yes
4
Yes
1
Clock Gear
Program Patch Logic (Bank)
Touch Screen Interface
Melody/Alarm Generator (MLD)
I/O Port (Pins)
Dual Clocks
RTC (Ch)
8-Bit PWM Generator (Ch)
CS/WAIT Controller (Ch)
Watchdog Timer
32-kHz Timer (for S/W RTC)
8-Bit Timer/Counter (Ch)
16-Bit Timer/Counter (Ch)
LCD Driver (Ch)
LCD Controller
Memory Bank Controller
10-Bit AD Converter (Ch)
LED Driver (Ch)
UART/SIO (Ch)
UART (Ch)
SIO (Ch)
I2C/SIO (Ch)
I2C (Ch)
DRAM Controller (Ch)
RAM (Bytes)
ROM (Bytes)
Part Number
Minimum Instruction Execution Time
(s) (Note 2)
□Mask ROM Versions
4 Yes Yes Yes
Power
Supply
Voltage
(V)
(1) 2.7 to 3.6
(2) 1.8 to 3.6
-10 to 70
4
6 1
4 Yes
Yes
45
(Note 1)
(1) 4.75 to
5.25
(2) 3.0 to 3.6
-20 to 70
2
8
6 1
4 Yes
Yes
53
2.7 to 3.6
-40 to 85
1 Yes 8 Yes
4 1
1
(1) 3.0 to 3.6
Yes 77
(2) 2.7 to 3.6
4 Yes Yes Yes
2
1
4
6 1 Yes
4 Yes Yes Yes
2
1
4
6 1 Yes
4 Yes Yes Yes
53 (1) 2.7 to 3.6
53 (2) 1.8 to 3.6
TMP91FW27UG
LQFP64
(10×10 mm)
8
8 2
3 Yes Yes Yes
80
(1) 2.7 to 3.6
(2) 2.0 to 3.6
TMP91PW10FG
LQFP100
(14×14 mm)
TMP91FW27FG
QFP64
(14×14 mm)
TMP91FW27UG
LQFP64
(10×10 mm)
2
1
4
6 1 Yes
4 Yes Yes Yes
53
2
1
4
6 1 Yes
4 Yes Yes Yes
53
1
8
2 2 Yes
2 3 Yes Yes Yes
79
(1) 4.5 to 5.5
(2) 2.7 to 5.5
2
1
8
8 2 Yes
4 Yes Yes Yes
81
(1) 2.7 to 3.6
(2) 1.8 to 3.6
(1) 0.16
(2) 0.25
2
1
8
8 2 Yes
4 Yes Yes Yes
81
(1) 4.5 to 5.5
(2) 2.7 to 5.5
(1) 0.148
(2) 0.25
(3) 0.4
4
TMP91CW60DFG
8192
0.2
TMP91CW60FG
TMP91CY22FG
2
1
2
4
3
3
256K 16384
(1) 0.148
(2) 0.4
2
1
(Note3)
40
-20 to 70
(1) 2.7 to 3.6
(2) 1.8 to 3.6
(1) 0.148
(2) 0.4
128K
LQFP144
(16×16 mm)
1
TMP91CW12AFG
TMP91CW40FG
-
LQFP100
(14×14 mm)
3
(1) 0.16
(2) 0.32
4096
Package
for operating
conditions.)
Yes 31
TMP91CW11FG
TMP91CW12FG
Operating
Temperature
(See the datasheet
(°C)
1
3
6
OTP/Flash
Version
TMP91PW11FG
-40 to 85
TMP91FY42FG
TMP91PW12FG
LQFP100
(14×14 mm)
(1) 2.7 to 3.6
4 3
1
Yes Yes
6
Yes 61 (2) 2.2 to 3.6
TMP91FW40FG
(3) 1.8 to 3.6
2
16
6 5 Yes
4 Yes Yes Yes 6
83
2
16
6 5 Yes
4 Yes Yes Yes 6
83
8
8 2 Yes
4 Yes Yes Yes
81
4.5 to 5.5
TMP91FW64DFG
TMP91FW64FG
(1) 2.7 to 3.6
(2) 1.8 to 3.6
TMP91FY42FG
Note 1) 3.0 V to 3.6 V internally; 4.75 V to 5.25 V for input/output interface
Note 2) Minimum instruction execution times (1) to (3) correspond to power supply voltages (1) to (3).
Note 3) For the 4-common and 40-segment LCD driver specification, see the technical datasheet.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
11
2011/9 SCE0004L
QFP100
(14×20 mm)
LQFP100
(14×14 mm)
TLCS-900 Family: TLCS-900/L Series
64K
2048
TMP93CS36UG
TMP93CW40DFG
1
8
40
Motor Pattern Generator (Ch)
8-Bit PWM Generator (Ch)
32-kHz Timer (for S/W RTC)
2
Yes Yes Yes 88
Yes
(1) 0.2
2
(2) 0.32
4
4
2
2
8
2
2
8
4
2
2
2
I/O Port (Pins)
4 Yes
Clock Gear
4
Dual Clocks
2
Watchdog Timer
2
CS/WAIT Controller (Ch)
LCD Driver (Ch)
(Note3)
2
16-Bit Timer/Counter (Ch)
2
8
8-Bit Timer/Counter (Ch)
TMP93CS20FG
2
10-Bit AD Converter (Ch)
4096
I2C/SIO (Ch)
NA
UART/SIO (Ch)
RAM (Bytes)
TMP93CW41DFG
ROM (Bytes)
Part Number
Minimum Instruction Execution
Time (s) (Note 2)
□Mask ROM Versions
Power Supply Operating
Voltage
Temperature
(V)
(°C)
3 Yes Yes Yes 61
Yes 33
3 Yes Yes Yes 79
OTP Version
(See the datasheet for
operating conditions.)
TMP93PW20AFG
(1) 4.5 to 5.5
(2) 2.7 to 5.5
-40 to 85
-
2
1
Yes Yes Yes 62
LQFP144
(16×16 mm)
LQFP44
(10×10 mm)
LQFP100
(14×14 mm)
TMP93PW44ADFG (Note 1)
QFP80
(14×20 mm)
Note 1) Operating voltage of OTP-version TMP93PW44ADFG is 4.5 V to 5.5 V.
Note 2) Minimum instruction execution times (1) and (2) correspond to power supply voltages (1) and (2).
Note 3) For the 4-common and 40-segment LCD driver specification, see the technical datasheet.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
12
LQFP100
(14×14 mm)
TMP93PW40DFG
128K 4096
TMP93CW44DFG (Note 1)
Package
2011/9 SCE0004L
TLCS-900 Family: TLCS-900/H Series
TMP95C061BDFG
NA
1
4
2
2
8
2048
4096
2048
(1) 0.16
(2) 0.4
3
3
3
0.16
I/O Port (Pins)
Watchdog Timer
OTP Version
Operating
Temperature
(°C)
(See the datasheet for
operating conditions.)
(1) 4.5 to 5.5
(2) 2.7 to 5.5
4
2
Power Supply
Voltage
(V)
4
2
2
4
Yes 56
2
8
2
2
4
Yes 91
8
2
8
2
4
Yes 55
8
2
8
2
4
Yes 55
8
2
8
2
4
Yes 81
8
2
4
Yes 81
0.16
NA
TMP95C063DFG
64K
CS/WAIT Controller (Ch)
Motor Pattern Generator (Ch)
16-Bit Timer/Counter (Ch)
8-Bit Timer/Counter (Ch)
8-Bit DA Converter (Ch)
10-Bit AD Converter (Ch)
DRAM Controller (Ch)
(1) 0.16
(2) 0.32
TMP95C001FG
TMP95C265FG
TMP95CW65FG
TMP95CS64FG
TMP95CS66FG
UART/SIO (Ch)
RAM (Bytes)
ROM (Bytes)
Part Number
Minimum Instruction Execution
Time (s) (Note 1)
□Mask ROM Versions
QFP64
(14×14 mm)
4.5 to 5.5
1
LQFP100
(14×14 mm)
-
LQFP144
(20×20 mm)
-20 to 70
(1) 4.5 to 5.5
(2) 2.7 to 3.3
4.5 to 5.5
Package
LQFP100
(14×14 mm)
TMP95PW64FG
Note 1) Minimum instruction execution times (1) and (2) correspond to power supply voltages (1) and (2).
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
TLCS-900 Family: TLCS-900 Series
8-Bit PWM Generator (Ch)
CS/WAIT Controller (Ch)
2
2
2
2
3
Yes 47
4
2
2
2
2
3
Yes 47
I/O Port (Pins)
Motor Pattern Generator (Ch)
4
Watchdog Timer
16-Bit Timer/Counter (Ch)
2
2
6-Bit AD Converter (Ch)
(1) 0.2
(2) 0.25
DRAM Controller (Ch)
8-Bit Timer/Counter (Ch)
NA
1024
10-Bit AD Converter (Ch)
NA
UART/SIO (Ch)
TMP96C041BFG
TMP96C141BFG
RAM (Bytes)
ROM (Bytes)
Part Number
Minimum Instruction Execution
Time (s) (Note 1)
□Mask ROM Versions
Power Supply
Voltage
(V)
Operating
Temperature
(°C)
4.5 to 5.5
(1) -20 to 70
(2) -40 to 85
OTP Version
(See the datasheet for
operating conditions.)
-
Note 1) Minimum instruction execution times (1) and (2) correspond to operating temperature (1) and (2).
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
13
2011/9 SCE0004L
Package
QFP80
(14×20 mm)
32-Bit Microcontrollers
TLCS-900 Family: TLCS-900/H1 Series
TMP92FD23ADFG
TMP92FD23AFG
TMP92FD28AFG
512K 32768 0.05
1
Clock Gear
Program Patch Logic (Bank)
I/O Port (Pins)
Dual Clocks
I2C/SIO (Ch)
DMA Controller (Ch)
DRAM Controller (Ch)
NAND Flash Controller (Ch)
Memory Bank Controller
10-Bit AD Converter (Ch)
8-Bit DA Converter (Ch)
LCD Controller
8-Bit Timer/Counter (Ch)
16-Bit Timer/Counter (Ch)
32-kHz Timer (for S/W RTC)
RTC (Ch)
Motor Pattern Generator (Ch)
Multiply-Accumulate (MAC)
CS/WAIT Controller (Ch)
Watchdog Timer
High-Speed SIO (Ch)
UART/SIO (Ch)
SPI (SD Card)
USB Device (Full Speed) (Ch)
USB Host (Full Speed) (Ch)
RAM (Bytes)
ROM (Bytes)
Part Number
Minimum Instruction Execution
Time (s)
□Flash Versions
Mask ROM Version
Power
Operating
Supply
Temperature (See the datasheet Package
Voltage
(°C)
for operating
(V)
1
3
2
12
6 2 Yes
4 Yes Yes Yes 8 84
1
3
2
12
6 2 Yes
4 Yes Yes Yes 8 84 3.0 to 3.6
Yes 1
2
(Note1)
2
6 2
1
3 Yes Yes Yes 8 70
conditions.)
TMP92CY23DFG
TMP92CD23ADFG
-40 to 85
TMP92CY23FG
TMP92CD23AFG
TMP92CD28AFG
Note 1) Only one channel can be configured as SIO.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
14
2011/9 SCE0004L
QFP100
(14×20 mm)
LQFP100
(14×14 mm)
TLCS-900 Family: TLCS-900/H1 Series
TMP94C251ADFG ◇
2048
TMP92C820FG
TMP92CA25FG
TMP92CH21FG
10240
(1) 0.05
16384
(2) 0.074
2
0.05
2 1
8192
Yes
1
NA
32768
TMP92CF29AFG
TMP92CF30FG
TMP92CZ26AXBG
147456
1
1
2
1
2 4
2
6 Yes
I/O Port (Pins)
I2S(inter-IC Sound) Interface(Ch)
Melody/Alarm Generator (MLD)
Clock Gear
Program Patch Logic (Bank)
Touch Screen Interface
Dual Clocks
Watchdog Timer
LCD Controller
8-Bit Timer/Counter (Ch)
16-Bit Timer/Counter (Ch)
32-kHz Timer (for S/W RTC)
RTC (Ch)
Motor Pattern Generator (Ch)
Multiply-Accumulate (MAC)
CS/WAIT Controller (Ch)
4 4
Flash Version
Power
Operating
(See the
Supply
Package
Temperature
datasheet for
Voltage
(°C)
operating
(V)
conditions.)
64
4.5 to 5.5
83
3.0 to 3.6
Yes 5
Yes 4 1
1
4 Yes Yes Yes
Yes
1 2 Yes 4
Yes 4 1
1
4 Yes Yes Yes
Yes Yes
1
84 (1) 3.0 to 3.6
1 2 Yes 4
Yes 4 1
1
4 Yes Yes Yes
Yes Yes
1
82 (2) 2.7 to 3.6
8
4 2
12 2
8 6
4 Yes
Yes
50
(2) 0.0167
(1) 0.0125
(2) 0.0167
TMP92CY23DFG
1
2
6 Yes
Yes
83
1 Yes
1
1 6 1 2 Yes 6
Yes 8 2
1
Yes 4 Yes Yes Yes
Yes Yes
2 136
1 Yes
2
1 6 1 2 Yes 6
Yes 8 2
1
Yes 4 Yes Yes Yes
Yes Yes
1
98
1 Yes
2
1 6 1 2 Yes 6
8 2
1
Yes 4 Yes Yes Yes
Yes Yes
1
98
1 Yes
1
1 6 1 2 Yes 6
Yes 8 2
1
Yes 4 Yes Yes Yes
Yes Yes
2 136
LQFP144
(20×20 mm)
-20 to 70
LQFP144
(16×16 mm)
LQFP100
3.0 to 3.6
0.0125
294912
1
1
8 2
0.05
(1) 0.0125
TMP92CF26AXBG
2
2
TMP92CM22FG
TMP92CM27FG
I2C/SIO (Ch)
I2C (Ch)
DMA Controller (Ch)
DRAM Controller (Ch)
NAND Flash Controller (Ch)
Memory Bank Controller
10-Bit AD Converter (Ch)
8-Bit DA Converter (Ch)
USB Host (Full Speed) (Ch)
USB Device (Full Speed) (Ch)
SPI (SD Card)
High-Speed SIO (Ch)
UART/SIO (Ch)
UART (Ch)
RAM (Bytes)
ROM (Bytes)
Part Number
Minimum Instruction Execution
Time (s) (Note 2)
□Mask ROM Versions
-40 to 85
(14×14 mm)
-
(Note 1)
(1) 3.0 to 3.6
(2) 1.4 to 1.6
(1) 0 to 50
FBGA228
(2) 0 to 70
(15×15 mm)
LQFP176
0 to 70
(20×20 mm)
(1) 0 to 50
FBGA228
(2) 0 to 70
(15×15 mm)
3
2
12
6 2 Yes
4 Yes Yes Yes 8
84
TMP92FD23ADFG
3
2
12
6 2 Yes
4 Yes Yes Yes 8
84
TMP92FD23AFG
1 3
2
12
6 2 Yes
4 Yes Yes Yes 8
84
2
12
6 2 Yes
4 Yes Yes Yes 8
84
TMP92FD23AFG
3 Yes Yes Yes 8
70
TMP92FD28AFG
256K 16384
TMP92CY23FG
0.05
TMP92CD23ADFG
TMP92CD23AFG
TMP92CD28AFG
1 3
512K 32768
1
Yes 1 2
(Note3)
2
6 2
1
3.0 to 3.6
-40 to 85
TMP92FD23ADFG
◇: Contains a 900/H2 core that is functionally fully compatible with 900/H1 core.
Note 1) Dual power supplies: 1.4 V to 1.6 V for internal circuitry, 3.0 V to 3.6 V for input/output interface.
Note 2) Minimum instruction execution times (1) and (2) correspond to (1) and (2) of both power supply voltage and operating temperature.
Note 3) Only one channel can be configured as SIO.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
15
LQFP144
(16×16 mm)
2011/9 SCE0004L
QFP100
(14×20 mm)
LQFP100
(14×14 mm)
QFP100
(14×20 mm)
LQFP100
(14×14 mm)
TX03 Family: TX03 Series
2
1
3
1
10
8
1
(Note1)
1
1
8
I/O Port (Pins)
Voltage Detecting Circuit
Power-On Reset
Oscillation Frequency Detector
Trace Function
40
Dual Clocks
8K
Multi-Purpose Timer (MPT) (Ch)
Incremental Encoder Input (Ch)
Op Amp (Ch)
Comparator (Ch)
External Interrupt Pins (Pins)
CS/WAIT Controller (Ch)
RTC (Ch)
Maximum Operating Frequency (MHz)
TMPM382FSFG **
Motor Controller (Ch)
SRAM (Bytes)
64K
Part Number
DMA Controller (Ch)
SSP(Ch)
UART/SIO (Ch)
Full UART(ch)
I2C (Ch)
I2C/SIO(Ch)
CAN (ch)
USB Host (Full Speed) (Ch)
USB Dvice (Full Speed) (Ch)
Ether MAC (ch)
10-Bit AD Converter (Ch)
12-Bit AD Converter (Ch)
10-Bit DA Converter (Ch)
16-Bit Timer/Counter (Ch)
CEC (Ch)
Remote Control Preprocessor (Ch)
ROM (Bytes)
□Flash Versions
Power
Operating
Supply
Temperature Package
Voltage
(°C)
(V)
1 Yes Yes Yes Yes Yes 48 4.0 to 5.5
(1) 80
(2) 32
4
11
8
1
1
10
(1) 80
(2) 32
3
7
8
1
1
8
Yes Yes Yes 37 4.5 to 5.5
(1) 80
(2) 32
3
6
8
1
1
7
Yes Yes Yes 33
TMPM330FWFG
40
3
3
12
10 1
2
8
1 Yes Yes
78
TMPM332FWUG
40
2
2
8
10 1
1
5
1 Yes Yes
44 2.7 to 3.6
40
3
3
12
10
8
1 Yes Yes
78
TMPM372FWUG **
TMPM373FWDUG **
6K
TMPM374FWUG **
8K
TMPM333FWFG
TMPM390FWFG **
TMPM395FWAXBG
20
1
3
1
1
12
10 1
2
8
1 Yes Yes Yes Yes Yes 74
20
4
3
1
1
12
10 1
2
11
1 Yes Yes Yes Yes Yes 91
12K
TMPM382FWFG **
TMPM366FWFG **
(Note1)
40
2
2
5
2
18
8
1
40
2
2
5
2
18
8
1
40
2
1
3
1
10
8
1
48
4
3
2
1
2
1
12
10
10 2
Yes
74
48
4
3
2
1
2
1
12
10
10 2
Yes
74
2
(Note1)
2
(Note1)
1
(10×10 mm)
(1) -40 to 85
LQFP48
(2) -40 to 105
(7×7 mm)
LQFP44
(10×10 mm)
LQFP100
(14×14 mm)
-20 to 85
LQFP100
FBGA120
(6×6 mm)
QFP100
2
16
1 Yes Yes Yes Yes Yes 84
3
2
16
1 Yes Yes Yes Yes Yes 84 4.0 to 5.5
8
1 Yes Yes Yes Yes Yes 48
(14×20 mm)
LQFP100
(14×14 mm)
-40 to 85
TMPM367FWFG **
80
31 3
4
2
3
1
8
2
8
1
80
31 3
4
2
3
1
8
2
8
1
50K
TMPM367FWXBG **
(Note1)
1
(Note1)
1
Note 1) The motor controller channel is multiplexed with the multi-purpose timer (MPT).
Note 2) 3.0 to 3.6 V when USB is used.
Note 3) 48 MHz when USB is used.
 All products on this page incorporate a watchdog timer, a clock gear and an on-chip debug unit.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
16
4
1
14 4
1
Yes Yes Yes Yes 60
4
1
14 4
1
Yes Yes Yes Yes 60
QFP64
(14×14 mm)
LQFP100
(14×14 mm)
32K
TMPM366FWXBG **
LQFP64
(10×10 mm)
(14×14 mm)
3
1
QFP64
(14×14 mm)
LQFP64
Yes Yes Yes Yes 53
1.7 to 3.6
128K
TMPM380FWDFG
TMPM380FWFG
-40 to 85
FBGA109
(Note 2)
2.7 to 3.6
(9×9 mm)
LQFP100
(14×14 mm)
FBGA109
(9×9 mm)
**: Under development
2011/9 SCE0004L
TMPM370FYDFG
80
4
22
8
2
2
4
4 16
I/O Port (Pins)
Voltage Detecting Circuit
Power-On Reset
Oscillation Frequency Detector
Trace Function
Multi-Purpose Timer (MPT) (Ch)
Incremental Encoder Input (Ch)
Op Amp (Ch)
Comparator (Ch)
External Interrupt Pins (Pins)
CS/WAIT Controller (Ch)
RTC (Ch)
Dual Clocks
Motor Controller (Ch)
Full UART(ch)
I2C (Ch)
I2C/SIO(Ch)
CAN (ch)
USB Host (Full Speed) (Ch)
USB Dvice (Full Speed) (Ch)
Ether MAC (ch)
10-Bit AD Converter (Ch)
12-Bit AD Converter (Ch)
10-Bit DA Converter (Ch)
16-Bit Timer/Counter (Ch)
CEC (Ch)
Remote Control Preprocessor (Ch)
DMA Controller (Ch)
SSP(Ch)
UART/SIO (Ch)
Maximum Operating Frequency (MHz)
SRAM (Bytes)
ROM (Bytes)
Part Number
Power
Operating
Supply
Temperature Package
Voltage
(°C)
(V)
QFP100
Yes Yes Yes Yes 76
10K
4.5 to 5.5
-40 to 85
TMPM370FYFG
80
4
TMPM330FYFG
40
3
3
12
10 1 2
8
1 Yes Yes
78
-20 to 85
TMPM330FYWFG
40
3
3
12
10 1 2
8
1 Yes Yes
78 2.7 to 3.6
-40 to 85
TMPM333FYFG
40
3
3
12
10
8
1 Yes Yes
78
-20 to 85
80
3
1
11
8
2
2
5
Yes Yes Yes Yes 63
TMPM377FYFG **
80
3
1
11
8
2
2
5
Yes Yes Yes Yes 63
TMPM380FYDFG
40
2
2
5
2
18
8
1
3
2
16
1 Yes Yes Yes Yes Yes 84
40
2
2
5
2
18
8
1
3
2
16
1 Yes Yes Yes Yes Yes 84
54
4
1
5
2
15 2 12
12 2
Yes Yes
86
48
4
3
2
1
2
1
12
10
10 2
Yes
74
48
4
3
2
1
2
1
12
10
10 2
Yes
74
TMPM377FYDFG **
TMPM380FYFG
16K
256K
TMPM341FYXBG **
32K
TMPM366FYFG **
22
8
2
2
4
Yes Yes Yes Yes 76
4 16
2
(Note1)
2
LQFP80
LQFP80
(12×12 mm)
QFP100
(14×20 mm)
4.0 to 5.5
LQFP100
(14×14 mm)
1.65 to
FBGA113
3.6
(6×6 mm)
-40 to 85
48K
TMPM366FYXBG **
TMPM367FYFG **
80
31 3
4
2
3
1
8
2
8
1
TMPM367FYXBG **
80
31 3
4
2
3
1
8
2
8
1
66K
TMPM369FYFG **
80
31 3
4
2
3
1
1
1
1
16 2
8
1
TMPM369FYXBG **
80
31 3
4
2
3
1
1
1
1
16 2
8
1
TMPM330FDFG
40
3
3
12
TMPM330FDWFG
40
3
3
40
3
3
TMPM333FDFG
32K
TMPM341FDXBG
54
4
1
(Note1)
1
(Note1)
1
(Note1)
4
1
14 4
1
Yes Yes Yes Yes 60
4
1
14 4
1
Yes Yes Yes Yes 60
LQFP100
(14×14 mm)
FBGA109
(9×9 mm)
(Note 2)
LQFP144
16 4
1
Yes Yes Yes Yes 102 2.7 to 3.6
4
2
16 4
1
Yes Yes Yes Yes 102
10 1 2
8
1 Yes Yes
78
-20 to 85
12
10 1 2
8
1 Yes Yes
78
-40 to 85
12
10
8
1 Yes Yes
78
5
2
15 2 12
2
12 2
Yes Yes
86
TMPM376FDDFG **
80
4
1
22
8
2
2
16
Yes Yes Yes Yes 82
TMPM376FDFG **
80
4
1
22
8
2
2
16
Yes Yes Yes Yes 82
(20×20 mm)
FBGA177
(11×11 mm)
TMPM366FDFG **
48
4
3
2
1
2
1
12
10
10 2
Yes
74
48
4
3
2
1
2
1
12
10
10 2
Yes
74
TMPM367FDFG **
80
31 3
4
2
3
1
8
2
8
1
TMPM367FDXBG **
80
31 3
4
2
3
1
8
2
8
1
TMPM366FDXBG **
-20 to 85
FBGA113
3.6
(6×6 mm)
QFP100
(14×20 mm)
LQFP100
(14×14 mm)
64K
128K
TMPM369FDFG **
80
31 3
4
2
3
1
1
1
1
16 2
8
1
TMPM369FDXBG **
80
31 3
4
2
3
1
1
1
1
16 2
8
1
(Note1)
1
(Note1)
1
(Note1)
2
(Note1)
2
Note 1) The motor controller channel is multiplexed with the multi-purpose timer (MPT).
Note 2) 3.0 to 3.6 V when USB is used.
Note 3) 48 MHz when USB is used.
 All products on this page incorporate a watchdog timer, a clock gear and an on-chip debug unit.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
17
4
1
14 4
1
Yes Yes Yes Yes 60
4
1
14 4
1
Yes Yes Yes Yes 60
4
2
16 4
1
Yes Yes Yes Yes 102
4
2
16 4
1
Yes Yes Yes Yes 102
LQFP100
(14×14 mm)
1.65 to
4.5 to 5.5
512K
(14×14 mm)
(9×9 mm)
2
(Note1)
LQFP100
FBGA109
4
2
LQFP100
(14×14 mm)
(14×14 mm)
4.5 to 5.5
(Note1)
(14×20 mm)
FBGA109
-40 to 85
(9×9 mm)
LQFP100
(Note 2)
(14×14 mm)
2.7 to 3.6
FBGA109
(9×9 mm)
LQFP144
(20×20 mm)
FBGA177
(11×11 mm)
**: Under development
2011/9 SCE0004L
TX03 Family: TX03 Series
TMPM380FDFG **
40
2 2
5
2
18
8
1
512K 32K
TMPM384FDFG **
40
2 2
5
TMPM321F10FG
48
2 1
5
TMPM322F10FG
48
2 1 12
TMPM323F10FG
48
2 1
TMPM324F10FG
48
2 1 12
TMPM361F10FG
64
2 1
TMPM362F10FG
64
2 1 12
TMPM363F10FG
(Note 3)
TMPM364F10FG
(Note 3)
2
1
22
8
1
(Note 1)
2
(Note 1)
2
3
2
I/O Port (Pins)
Voltage Detecting Circuit
Power-On Reset
Oscillation Frequency Detector
Trace Function
Comparator (Ch)
External Interrupt Pins (Pins)
CS/WAIT Controller (Ch)
RTC (Ch)
Dual Clocks
Op Amp (Ch)
Multi-Purpose Timer (MPT) (Ch)
Incremental Encoder Input (Ch)
Motor Controller (Ch)
12-Bit AD Converter (Ch)
10-Bit DA Converter (Ch)
16-Bit Timer/Counter (Ch)
CEC (Ch)
Remote Control Preprocessor (Ch)
DMA Controller (Ch)
SSP(Ch)
UART/SIO (Ch)
Full UART(ch)
I2C (Ch)
I2C/SIO(Ch)
CAN (ch)
USB Host (Full Speed) (Ch)
USB Dvice (Full Speed) (Ch)
Ether MAC (ch)
10-Bit AD Converter (Ch)
SRAM (Bytes)
ROM (Bytes)
Part Number
Maximum Operating Frequency (MHz)
□Flash Versions (Continued)
Power
Operating
Supply
Temperature Package
Voltage
(°C)
(V)
LQFP100
1 Yes Yes Yes Yes Yes 84
16
(14×14 mm)
4.0 to 5.5
4
2
16
1 Yes Yes Yes Yes Yes 84
3
1
8
8
1
8
1 Yes Yes
74
5
1
16
16
2
14 4
1 Yes Yes
118
3 1
1
8
8
1
8
1 Yes Yes
74
5 1
1
16
16
2
14 4
1 Yes Yes
118
3
8
16 1
1
10 4
1 Yes Yes
76
5
16
16 1
2
16 4
1 Yes Yes
120
LQFP144
(20×20 mm)
LQFP100
-40 to 85
5
1
1
2.7 to 3.6
LQFP100
(14×14 mm)
LQFP144
(20×20 mm)
LQFP100
2.7 to 3.6
64
64
2 1
5
2 1 12
1
3 1
1
8
16 1
1
8
4
1 Yes Yes
74
5 1
1
16
16 1
2
14 4
1 Yes Yes
118
Note 1) The motor controller channel is multiplexed with the multi-purpose timer (MPT).
Note 2) 3.0 to 3.6 V when USB is used.
Note 3) 48 MHz when USB is used.
 All products on this page incorporate a watchdog timer, a clock gear and an on-chip debug unit.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
18
LQFP144
(20×20 mm)
(Note 2)
1024K 64K
5
(14×14 mm)
-20 to 85
(14×14 mm)
LQFP144
(20×20 mm)
LQFP100
(Note 2)
2.7 to 3.6
-40 to 85
(14×14 mm)
LQFP144
(20×20 mm)
**: Under development
2011/9 SCE0004L
TX03 Family: TX03 Series
SD Host Controller (Ch)
SSP(SPI/MicroWire) (Ch)
UART (Ch)
I2C (Ch)
10-Bit AD Converter (Ch)
16-Bit Timer/Counter (Ch)
External Interrupt Pins (Pins)
Watchdog Timer
Static Memory Controller (Ch)
On-Chip Debug Unit
Trace Function
I/O Port (Pins)
DRAM (Bytes)
320K 1024K 144
USB Host (High Speed) (Ch)
NA
Power Supply Operating
Voltage
Temperature
(V)
(°C)
DMA Controller (Ch)
TMPM320C1DFG
SRAM (Bytes)
ROM (Bytes)
Part Number
Maximum Operating Frequency (MHz)
□Mask ROM Versions
8
1
1
4
4
2
4
8
4
Yes
2
Yes
Yes
55
(Note1)
-40 to 85
Note 1) The following three power supplies are available:
(1) For general port, AD converter: 3.0 V to 3.6 V
(2) For USB: 3.15 V to 3.45 V
(3) For internal circuitry: 1.1 V to 1.3 V
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
19
2011/9 SCE0004L
Package
LQFP144
(20×20 mm)
TX09 Family:TX09 Series
TMPA913CHXBG
16K
TMPA900CMXBG
TMPA901CMXBG
TMPA912CMXBG
TMPA910CRAXBG
TMPA910CRBXBG
TMPA911CRXBG
32K
1
(1) 200 1
(2) 150
1
1
1
NA
1
2
2
2
8
4
1
2
6
3
2
2
8
2
1
2
8 Yes Yes 6 Yes Yes 2 Yes 1 Yes
Yes Yes Yes 91
2
1
1
8
2
1
2
4 Yes Yes 6 Yes Yes 1 Yes
Yes Yes Yes 43
Yes
Yes
Yes Yes
Operating
Temperature
(°C)
FBGA361
(16×16 mm)
98
(1) 0 to 70
(2) -20 to 85
(Note1)
2
2
2
8
4
1
2
6 Yes Yes 6 Yes Yes 2 Yes 1 Yes
Yes Yes
98
1
2
2
2
2
8
4
1
2
6 Yes Yes 6 Yes Yes 2 Yes 1 Yes
Yes Yes
114
0 to 70
150
1
2
2
2
2
8
4
1
2
6 Yes Yes 6 Yes Yes 2 Yes 1 Yes
Yes Yes
114
-20 to 85
2
2
2
8
4
1
2
6 Yes Yes 6 Yes Yes 2 Yes 1 Yes
Yes Yes
98
(1) 0 to 70
(2) -20 to 85
(1) 200
1
(2) 150
Note 1) The following five power supplies are available:
(1) For circuitry in general, AD converter, USB host (Full-Speed): 3.0 V to 3.6 V
(2) For USB device (High-Speed): 3.15 V to 3.45 V
(3) For memory: 1.7 V to 1.9 V/3.0 V to 3.6 V
(4) For CMOS image sensor, I2S, LCD: 1.8 V to 3.6 V
(5) For internal circuitry: 1.4 V to 1.6 V
Note 2) The external data bus width is as follows:
・TMPA910CRAXBG, TMPA910CRBXBG, TMPA911CRXBG, TMPA900CMXBG: Up to 32 bits
・TMPA912CMXBG, TMPA913CHXBG, TMPA901CMXBG: Up to 16 bits
Note 3) Maximum operating frequencies (1) and (2) correspond to operating temperatures (1) and (2).
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
20
Package
I/O Port (Pins)
Watchdog Timer
I2S(Inter-IC Sound) Interface (Ch)
Touch Screen Interface
CMOS Image Sensor Interface (Ch)
JTAG (Debug)
JTAG (PC Trace)
JTAG (Boundary-Scan)
Clock Gear
Oscillation Frequency Detector
32-kHz Timer (for S/W RTC)
6 Yes Yes 2 Yes
Power Supply
Voltage
(V)
200
1
56K
NANDFC (Ch)
10-Bit AD Converter (Ch)
LCD Controller
LCD Data Process Accelerator
16-Bit Timer/Counter (Ch)
USB Device (High Speed) (Ch)
USB Host (Full Speed) (Ch)
SD Host Controller (Ch)
UART (Ch)
I2C (Ch)
SSP (Ch)
DMA Controller (Ch)
Static Memory Controller (Ch)
DRAM Controller
(SDR SDRAM / LVCMOS DDR SDRAM) (Ch)
RAM (Bytes)
ROM (Bytes)
Part Number
Maximum Operating Frequency (MHz)
□Mask ROM Versions
2011/9 SCE0004L
FBGA289
(15×15 mm)
FBGA177
(13×13 mm)
FBGA361
(16×16 mm)
TX19 Family: TX19A Series
4
Yes 75
10K
TMP19A71FYUG
56
8
2
2
19
4
54
4
3
1
2
12
40
4
3
1
2
12
40
8
3
3
1
16
2
operating conditions.)
10
Yes 75
12
16
Yes 111
12
15
Yes 103
(Note 1)
2.3 to 2.7
TMP19A71CYFG
QFP100
(14×20 mm)
TMP19A71CYUG
LQFP100
(14×14 mm)
-40 to 85
256K
TMP19A23FYFG
3.0 to 3.6
24K
TMP19A23FYXBG
TMP19A43FZXBG
384K
20K
-
2
16
8
Package
I/O Ports (Pins)
10
Debug Support Unit
2
Mask ROM Version
Operating
Temperature
(See the datasheet for
(°C)
Power
Supply
Voltage
(V)
Dual Clocks
External Interrupt Pins (Pins)
32-Bit Timer Input Capture (Ch)
32-Bit Timer Output Compare (Ch)
16-Bit Timer/Counter (Ch)
8-Bit Timer/Counter (Ch)
10-Bit DA Converter (Ch)
8-Bit DA Converter (Ch)
19
Motor Controller (Ch)
2
10-Bit AD Converter (Ch)
2
I2C/SIO (Ch)
8
UART (Ch)
56
UART/HSIO (Ch)
UART/SIO (Ch)
TMP19A71FYFG
DMA Controller (Ch)
RAM (Bytes)
ROM (Bytes)
Part Number
Maximum Operating Frequency (MHz)
□Flash Versions
4
48 Yes Yes 143
TMP19A43CZXBG
-20 to 85
LQFP144
(20×20 mm)
FBGA141
(9×9 mm)
FBGA193
(12×12 mm)
16
8
4
(Note 1)
48 Yes Yes 143
1.35 to 1.65
32
36
4
4
16
Yes 212
TMP19A61C10XBG
TMP19A61CDXBG
FBGA289
(11×11 mm)
24
11 10
4
20 Yes Yes 209
TMP19A64C1DXBG
FBGA281
(13×13 mm)
TMP19A43FDXBG
512K
24K
40
8
3
3
1
16
TMP19A61F10XBG
1024K
48K
54
8
9
2
2
TMP19A64F20BXBG
2048K
64K
54
8
7
1
2
TMP19A43CDXBG
Note 1) A separate I/O power supply is required.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
TX19 Family: TX19A/H1 Series
32-Bit Timer Input Capture (Ch)
3
3
1
16 18
8
4
64
1 Yes Yes 160
80
8
3
3
1
16 18
8
4
64
1 Yes Yes 160
TMP19A44F10XBG
80
8
3
3
1
16 18
8
4
64
1 Yes Yes 160
64
8
5
3
3
2
11
Yes 49
64
8
5
3
3
2
11
Yes 49
(Note 1)
Mask ROM Version
(See the datasheet for
operating conditions.)
1024K
2048K
Package
I/O Ports (Pins)
Debug Support Unit
Operating
Temperature
(°C)
FBGA241
(12×12 mm)
64K
TMP19A33F20NG
TMP19A33F20NG-OTP
Dual Clocks
768K
Power Supply
Voltage
(V)
RTC (ch)
TMP19A44FEXBG
External Interrupt Pins (Pins)
32-Bit Timer Output Compare (Ch)
8
Motor Controller (Ch)
UART/HSIO (Ch)
80
16-Bit Timer/Counter (Ch)
UART/SIO (Ch)
512K
10-Bit AD Converter (Ch)
DMA Controller (Ch)
ROM (Bytes)
TMP19A44FDAXBG
I2C/SIO (Ch)
Maximum Operating Frequency (MHz)
32K
Part Number
UART (Ch)
RAM (Bytes)
□Flash Versions
2.7 to 3.6
-20 to 85
-
10K
SDIP64
Note 1) The on-chip ROM can be programmed only once and can not be reprogrammed.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
21
2011/9 SCE0004L
TX19 Family: TX19A Series
384K
20K
TMP19A43CDXBG
TMP19A61CDXBG
4
Flash Version
Operating
Temperature
(See the datasheet for
(°C)
56
8
2
40
8
3
2
3
19
1
16
24K
40
8
3
3
1
16
40K
54
8
9
2
2
2
4
2
16
2
2
operating conditions.)
Yes 75
8
10
4
Yes 75
48 Yes Yes 143
16
8
4
48 Yes Yes 143
32
36
4
4
16
Yes 212
2
32
36
4
4
16
Yes 212
1
24
11 10
4
20 Yes Yes 209
512K
TMP19A61C10XBG
1024K
48K
54
8
9
TMP19A64C1DXBG
1536K
56K
54
8
7
Package
I/O Ports (Pins)
10
Debug Support Unit
2
Dual Clocks
External Interrupt Pins (Pins)
32-Bit Timer Input Capture (Ch)
32-Bit Timer Output Compare (Ch)
16-Bit Timer/Counter (Ch)
8-Bit Timer/Counter (Ch)
10-Bit DA Converter (Ch)
8-Bit DA Converter (Ch)
19
Motor Controller (Ch)
2
10-Bit AD Converter (Ch)
I2C/SIO (Ch)
2
UART (Ch)
8
Power
Supply
Voltage
(V)
TMP19A71FYFG
QFP100
(14×20 mm)
TMP19A71FYUG
LQFP100
(14×14 mm)
-40 to 85
TMP19A71CYUG
TMP19A43CZXBG
56
UART/HSIO (Ch)
10K
UART/SIO (Ch)
RAM (Bytes)
256K
TMP19A71CYFG
DMA Controller (Ch)
ROM (Bytes)
Part Number
Maximum Operating Frequency (MHz)
□Mask ROM Versions
TMP19A43FZXBG
(Note 1)
1.35 to 1.65
TMP19A43FDXBG
-20 to 85
FBGA193
(12×12 mm)
TMP19A61F10XBG
FBGA289
(11×11 mm)
TMP19A64F20BXBG
FBGA281
(13×13 mm)
Note 1) A separate I/O power supply is required.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
TX19 Family: TX19A/H1 Series
12 16
6
Yes 16 Yes Yes
1
Mask ROM Version
Operating
Temperature
(See the datasheet for
(°C)
operating conditions.)
Yes Yes 96
2.7 to 3.6
-20 to 85
-
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
22
Package
I/O Ports (Pins)
Debug Support Unit
Dual Clocks
Power
Supply
Voltage
(V)
RTC (ch)
2
32-kHz Timer (for S/W RTC)
5
Clock Gear
I2C/SIO (Ch)
5
Watchdog Timer
UART/HSIO (Ch)
Yes
External Interrupt Pins (Pins)
UART/SIO (Ch)
8
Multiply-Accumulate (MAC)
External Memory Interface
80
CS/WAIT Controller (Ch)
DMA Controller (Ch)
256K
16-Bit PWM Generator (Ch)
Maximum Operating Frequency (MHz)
TMP19A31CYFG
16-Bit Timer/Counter (Ch)
RAM (Bytes)
NA
Part Number
10-Bit AD Converter (Ch)
ROM (Bytes)
□Mask ROM Versions
2011/9 SCE0004L
LQFP176
(24×24 mm)
8-Bit Microcontrollers for Automotive
TLCS-870 Family: TLCS-870/C Series
Power
Supply
Voltage
(V)
Operating
Temperature
(°C)
(1) 4.0 to 5.5
(2) 3.0 to 5.5
-40 to 85
I/O Port (Pins)
Voltage Detecting Circuit
Power-On Reset
2
Dual Clocks
(Low-Speed Mode (Note 2))
1
Watchdog Timer
8-Bit Timer/Counter (Ch)
18-Bit Timer/Counter (Ch)
6
16-Bit Timer/Counter (Ch)
1
10-Bit AD Converter (Ch)
1
8-Bit AD Converter (Ch)
1
I2C (Ch)
CAN (Ch)
SIO (Ch)
UART (Ch)
UART/I2C (Ch) (Note 3)
(1) 0.25
8
(2) 0.4
SEI (Ch)
TMP86FH92IDMG (Note 4) 16K 512
LED Driver (Ch)
RAM (Bytes)
ROM (Bytes)
Part Number
Minimum Instruction Execution
Time (s) (Note 1)
□Flash Versions
Yes Yes Yes Yes 24
Mask ROM Version
(See the datasheet for
operating conditions.)
TMP86CH92IDMG (Note 4)
TMP86CH92SDMG ** (Note 4)
Note 1) Minimum instruction execution times (1) and (2) correspond to power supply voltages (1) and (2).
Note 2) The minimum instruction execution time in Low-Speed mode is 122 s (at 32.768 kHz).
Note 3) Configurable as I2C or UART.
Note 4) Reliability testing includes AEC-Q100-Rev-F (July 18, 2003) in addition to Toshiba’s standard tests (automotive grade).
 For further information about the I/R/S/T grade levels, please contact your nearest Toshiba sales representative.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
Package
SSOP30
**: Under development
TLCS-870 Family: TLCS-870/C1 Series
TMP89FM82TDUG ** 32K 2048 0.125 20
1 1
8
2
4
On-Chip Debug Unit
I/O Port (Pins)
Voltage Detecting Circuit
Power-On Reset
Clock Gear
1 Yes Yes Yes Yes Yes Yes Yes 39
Note 1) Configurable as SIO or UART.
Note 2) Configurable as I2C or SIO. Up to two SIO channels can be used simultaneously.
Note 3) Configurable as SEI or UART.
Note 4) Only peripheral units remain active in Low-Speed mode.
Note 5) Enabled only in High-Speed mode.
 For further information about the I/R/S/T grade levels, please contact your nearest Toshiba sales representative.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
23
Watchdog Timer
Dual Clocks
(Low-Speed Mode (Note 4))
LED Driver (Ch)
LCD Driver (Ch)
VFT Driver (Ch)
SEI (Ch)
SIO (Ch)
UART (Ch)
UART/SIO (Ch) (Note 1)
SEI/UART (Ch) (Note 3)
I2C/SIO (Ch) (Note 2)
8-Bit AD Converter (Ch)
10-Bit AD Converter (Ch)
8-Bit DA Converter (Ch)
18-Bit Timer/Counter (Ch)
16-Bit Timer/Counter (Ch)
10-Bit Timer/Counter (Ch)
8-Bit Timer/Counter (Ch)
Multiply-Accumulate (MAC)
Motor Controller (Ch) (Note 5)
Program Patch Logic
RAM (Bytes)
ROM (Bytes)
Part Number
Minimum Instruction Execution
Time (s)
□Flash Versions
Mask ROM
Version
Power
Supply
Voltage
(V)
Operating
Temperature
(°C)
4.5 to 5.5
-40 to 125
(See the
datasheet for
operating
conditions.)
-
Package
LQFP48
(7×7 mm)
**: Under development
2011/9 SCE0004L
TLCS-870 Family: TLCS-870/C Series
TMP86C408IDMG
4K
TMP86C408SDMG
256
TMP86C808IDMG
TMP86C808SDMG
8K
TMP86C847IUG
TMP86C847SUG
TMP86CH47IUG
512
TMP86CH47SUG
TMP86CH92IDMG (Note 6)
16K
TMP86CH92SDMG (Note 6) **
(1) 0.25
(2) 0.5
I/O Port (Pins)
Voltage Detecting Circuit
Watchdog Timer
Dual Clocks
(Low-Speed Mode (Note 4))
Power-On Reset
8-Bit Timer/Counter (Ch)
16-Bit Timer/Counter (Ch)
10-Bit AD Converter (Ch)
8-Bit AD Converter (Ch)
I2C (Ch)
UART/I2C (Ch) (Note 5)
UART (Ch)
1
1
6
1
2 Yes Yes
24
-40 to 85
1
1
6
1
2 Yes Yes
24
-40 to 125
8
1
1
6
1
2 Yes Yes
24
-40 to 85
8
1
1
6
(1) 4.5 to 5.5
(2) 2.7 to 5.5
1
2 Yes Yes
24
19
1
1
8
1
2 Yes Yes
35
19
1
1
8
1
2 Yes Yes
35
-40 to 125
19
1
1
8
1
2 Yes Yes
35
-40 to 85
1
1
35
8
1
2 Yes Yes
8
1
1
1
6
1
2 Yes Yes Yes Yes 24
8
1
1
1
6
1
2 Yes Yes Yes Yes 24
1
1
14
1
2 Yes Yes
0.25
32K
SIO (Ch)
SEI (Ch)
CAN (Ch) (Note 2)
8
8
1024
Power Supply Operating
Voltage
Temperature
(V)
(°C)
8
19
(1) 0.25
(2) 0.4
TMP86CH87RUG
TMP86CM87RUG
LED Driver (Ch)
RAM (Bytes)
ROM (Bytes)
Part Number
Minimum Instruction Execution Time
(s) (Note 1)
□Mask ROM Versions
8
(Note 3)
1
(Note 3)
1
1
1
14
1
2 Yes Yes
OTP/Flash Version
Package
(See the datasheet for
operating conditions.)
TMP86P808DMG
SSOP30
TMP86PM47AUG
TMP86PH47UG
TMP86FH47AUG
LQFP44
(10×10 mm)
-40 to 125
-40 to 85
-40 to 125
-40 to 85
(1) 4.0 to 5.5
(2) 2.7 to 5.5
-40 to 125
4.5 to 5.5
-40 to 85
TMP86FH92IDMG (Note 6)
35
TMP86PM87RUG **
35
Note 1) Minimum instruction execution times (1) and (2) correspond to power supply voltages (1) and (2).
Note 2) There are four channels of mailboxes.
Note 3) Either the SEI or UART module should be selected via software.
Note 4) The minimum instruction execution time in Low-Speed mode is 122 s (at 32.768 kHz).
Note 5) Configurable as I2C or UART.
Note 6) Reliability testing includes AEC-Q100-Rev-F (July 18, 2003) in addition to Toshiba’s standard tests (automotive grade).
 For further information about the I/R/S/T grade levels, please contact your nearest Toshiba sales representative.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
SSOP30
LQFP44
(10×10 mm)
**: Under development
TLCS-870 Family: TLCS-870/X Series
(Note 1) (Note 1)
1
1
1
2
1
I/O Port (Pins)
4
Watchdog Timer
Motor Controller (Ch)
14
8-Bit Timer/Counter (Ch)
0.2
16-Bit Timer/Counter (Ch)
LED Driver (Ch)
512
10-Bit AD Converter (Ch)
Minimum Instruction Execution
Time (s)
TMP88CH40IMG
UART (Ch)
RAM (Bytes)
16K
Part Number
SIO (Ch)
ROM (Bytes)
□Mask ROM Versions
Yes 19
Power Supply
Voltage
(V)
Operating
Temperature
(°C)
4.5 to 5.5
-40 to 85
OTP Version
(See the datasheet for
operating conditions.)
TMP88PH40MG
Note 1) Cannot be used at the same time because their I/O pins are multiplexed.
 For further information about the I/R/S/T grade levels, please contact your nearest Toshiba sales representative.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
24
2011/9 SCE0004L
Package
SOP28
16-Bit Microcontrollers for Automotive
TLCS-900 Family: TLCS-900/L1 Series
3
Yes Yes Yes 53
2.7 to 3.6
TMP91CY22IFG
256K
16K
(1) 0.148
(2) 0.4
2
1
8
8
2 Yes
4
Yes Yes Yes 81
(1) 2.7 to 3.6
(2) 1.8 to 3.6
16-Bit PWM Generator (Ch)
I/O Port (Pins)
1 Yes
Clock Gear
6
Dual Clocks
4
Watchdog Timer
1
PDC (Ch)
8-Bit Timer/Counter (Ch)
2
CS/WAIT Controller (Ch)
I2C/SIO (Ch)
10-Bit AD Converter (Ch)
0.148
32-kHz Timer (for S/W RTC)
UART/SIO (Ch)
10K
16-Bit Timer/Counter (Ch)
Minimum Instruction Execution
Time (s) (Note 1)
96K
SEI (Ch)
RAM (Bytes)
TMP91CU27RUG **
Part Number
CAN (16 Mailboxes) (Ch)
ROM (Bytes)
□Mask ROM Versions
Power Supply Operating
Voltage
Temperature
(V)
(°C)
Flash Version
(See the datasheet for
operating conditions.)
TMP91FW27UG
LQFP64
(10×10 mm)
TMP91FY42FG
LQFP100
(14×14 mm)
-40 to 85
Note 1) Minimum instruction execution times (1) and (2) correspond to power supply voltages (1) and (2).
 For further information about the I/R/S/T grade levels, please contact your nearest Toshiba sales representative.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
Package
**: Under development
32-Bit Microcontrollers for Automotive
TLCS-900 Family: TLCS-900/H1 Series
Minimum Instruction Execution
Time (s)
CAN (16 Mailboxes) (Ch)
SEI (Ch)
UART/SIO (Ch)
I2C/SIO (Ch)
10-Bit AD Converter (Ch)
8-Bit Timer/Counter (Ch)
16-Bit Timer/Counter (Ch)
RTC (Ch)
CS/WAIT Controller (Ch)
Watchdog Timer
TMP92FD54AIFG (Note 1) **
32K
0.05
1
1
2
3
12
8
2
1
1
Yes
I/O Port (Pins)
RAM (Bytes)
512K
Part Number
Dual Clocks
ROM (Bytes)
□Flash Versions
68
Power Supply Operating
Voltage
Temperature
(V)
(°C)
4.5 to 5.25
-40 to 85
Note 1) Contains voltage regulator.
 For further information about the I/R/S/T grade levels, please contact your nearest Toshiba sales representative.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
Mask ROM Version
(See the datasheet for
operating conditions.)
TMP92CD54IFG **
Package
LQFP100
(14×14 mm)
**: Under development
TLCS-900 Family: TLCS-900/H1 Series
Minimum Instruction Execution
Time (s)
CAN (16 Mailboxes) (Ch)
SEI (Ch)
UART/SIO (Ch)
I2C/SIO (Ch)
10-Bit AD Converter (Ch)
8-Bit Timer/Counter (Ch)
16-Bit Timer/Counter (Ch)
RTC (Ch)
CS/WAIT Controller (Ch)
Watchdog Timer
TMP92CD54IFG (Note 1) **
32K
0.05
1
1
2
3
12
8
2
1
1
Yes
Note 1) Contains voltage regulator.
 For further information about the I/R/S/T grade levels, please contact your nearest Toshiba sales representative.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
25
I/O Port (Pins)
RAM (Bytes)
512K
Part Number
Dual Clocks
ROM (Bytes)
□Mask ROM Versions
68
Power Supply Operating
Voltage
Temperature
(V)
(°C)
4.5 to 5.25
-40 to 85
Flash Version
(See the datasheet for
operating conditions.)
TMP92FD54AIFG **
Package
LQFP100
(14×14 mm)
**: Under development
2011/9 SCE0004L
TX03 Family: TX03 Series
UART/SIO (ch)
12-Bit AD Converter (Ch)
Timer/Compare (32 bit)(ch)
Timer/Capture (32 bit)(ch)
PWM (24 bit)
Motor Controller (Ch)
32
1
2
20
7
1
6
1
TMPM354F10TFG **
1024K
64K
80
3
64
2
3
21
5
2
4
1
Note 1) The seven capture inputs of the timer can be programmed as external maskable interrupts.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
26
(Note 1)
1
1
(Note 1)
1
I/O Port (Pins)
SEI (ch)
2
Trace Function
DMA Controller (Ch)
88
Power
Supply
Voltage
(V)
On-Chip Debug Unit
CAN (ch)
48K
Yes Yes
Yes
43
Yes Yes
Yes
56
Watchdog Timer
Maximum Operating Frequency (MHz)
512K
External Interrupt Pins (Pins)
SRAM (Bytes)
TMPM350FDTFG **
Part Number
Resolver Digital Converter (RDC)
ROM (Bytes)
□Flash Versions
Operating
Temperature
(°C)
Package
-40 to 105
LQFP100
(14×14 mm)
-40 to 125
LQFP144
(20×20 mm)
4.5 to 5.5
**: Under development
2011/9 SCE0004L
32-Bit Microprocessors
Instruction Cache (Kbytes)
Data Cache (Kbytes)
I/O Ports (Pins)
Serial Interface (Ch)
Timer Channels (Ch)
External Interrupt Pins (Pins)
32
32
4
1
39
3
2
39
92
32
32
4
1
39
3
2
39
TMPR3927CFE
133
32
32
8
4
16
2
3
6
☆
4
Others
Package
Debug Support Unit
External Bus Width (Bits)
92
Memory Controller
PCI Controller (MHz)
Internal Bus Width (Bits)
TMPR3912AUG-92 ☆
TMPR3912XB-92 ☆
Part Number
DMAC Channels (Ch)
Maximum Operating Frequency (MHz)
TX39 Family
SDRAM, ROM,
SRAM, Flash
33
●
LCD interface, PCMCIA, RTC
SDRAM, SRAM,
ROM, Flash
LQFP208
FBGA217
QFP240
☆: Dry-packed
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
64-Bit Microprocessors
Timer Channels (Ch)
External Interrupt Pins (Pins)
32
16
8
1
4
●
TMPR4955BFG-200/300
☆
64
32
32
32
1
6
●
Debug Support Unit
Data Cache (Kbytes)
64
200
/300
PCI Controller (MHz)
Instruction Cache (Kbytes)
200
Serial Interface (Ch)
External Bus Width (Bits)
TMPR4951BFG-200
I/O Ports (Pins)
Internal Bus Width (Bits)
☆
Part Number
DMAC Channels (Ch)
Maximum Operating Frequency (MHz)
TX49 Family
Memory
Controller
Others
Package
LQFP100
QFP160
FPU
TMPR4955CFG-400
TMPR4956CXBG-400
☆
400
64
32
32
32
1
6
●
☆
400
64
64
32
32
1
6
●
TMPR4925XBG-200
☆
200
64
32
16
16
4
32
2
3
8
33
●
NAND Flash,
SDRAM, SRAM,
ROM, NOR Flash
FPU, SPI, AC-Link,
PCMCIA, RTC
PBGA256
TMPR4937XBG-300/333
☆
300
/333
64
64
32
32
8
16
2
3
6
33/66
●
SDRAM, SRAM,
ROM, NOR Flash
FPU, AC-Link
PBGA484
TMPR4938XBG-300/333
☆
300
/333
64
64
32
32
8
16
2
3
6
33/66
●
NAND Flash,
SDRAM, SRAM,
ROM, NOR Flash
FPU, Ether MAC, SPI, AC-Link
PBGA484
●
NAND Flash,
DDR-SDRAM,
SRAM, ROM,
NOR Flash
FPU, Ether MAC, ATA100, SPI,
AC-Link/I2S, I2C, Video port, RTC,
Crypt engine (AES, SHA1, etc.)
PBGA456
Graphics controller, frame grabber,
CAN controller, Media-LB interface,
ADC, AC-Link controller
PBGA456
TX4939XBG-400
☆
400
64
32
32
32
8
101
4
6
7
33/66
QFP160
PFBGA217
TX4961XBG-240
☆
240
64
32
16
16
8
※
6
12
5
●
NAND Flash,
DDR-SDRAM,
SRAM, ROM,
NOR Flash
TX4964FG-120
☆
120
64
16
8
8
4
※
4
6
7
●
SRAM, ROM,
NOR Flash
Graphics controller, frame grabber,
CAN controller, I2S controller
LQFP176
TX4966XBG-280
☆
280
64
32
16
16
8
※
7
22
10
●
SDRAM, SRAM,
ROM, NOR Flash
Graphics controller × 2,
frame grabber × 2, APIX, RSDS,
CAN controller, I2S controller
PBGA456
☆: Dry-packed
※ : All I/O pins are configurable as general-purpose I/Os.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
27
2011/9 SCE0004L
64-Bit Microprocessor Peripherals (PCI companion chip)
Part Number
TC86C001FG
☆
(GOKU-S)
Functions
PCI interface (32 bit, 33 MHz)
ATA/ATAPI host controller, Ultra DMA transfer (mode 4), maximum transfer rate  66 MB/s
USB1.1 host controller: 2 ports (OpenHCl 1.0a compatible)
USB device controller: 1 port
I2C/SIO
Power supply voltage (I/O  3.3 V, internal  1.5 V)
Package
LQFP144
☆: Dry-packed
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
28
2011/9 SCE0004L
Development System Tools
● Choose either the RTE870/C model 15 In-Circuit Emulation system or the RTE870/C In-Circuit Emulation system.
● The TLCS-870/C Series software products run on the Japanese or English Microsoft® Windows® 2000, Microsoft® Windows® XP and Microsoft® Windows Vista®.
Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
● For the supported Programming tools, see the section “Programming Tools”.
● Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
*1: The controller and In-Circuit Emulator comes with a single-seat download license for the Integrated Development Environment.
*2: The emulation chip is specifically designed for each target MCU. For availability status, contact your local Toshiba sales representative.
*3: One QFP adaptor and one pin protector are supplied with each QFP packaged product.
When you purchase additional QFP adaptors or pin protectors, check their part numbers in the section “Spare Parts from Toshiba.”
*4: These are ADLINKS’s products.
*5: One IC socket is supplied with each target connection board. IC sockets are Yamaichi Electronics’ products.
TLCS-870/C Series (1/4)
□Software Products
Toshiba Integrated Development Environment
C Compiler
Integrated Development Environment *1
SW89CN0-ZCC: 1 license
SW89CN3-ZCC: 10 licenses
SW00MN0-ZCC: 1 license
SW00MN3-ZCC: 10 licenses
□Hardware Products
Target MCU
Part Number
TMP86P203PG
TMP86P203MG
TMP86CH06AUG
TMP86PH06UG
TMP86CH06NG
TMP86PH06NG
TMP86C407NG
TMP86C807NG
TMP86F807NG
TMP86P807NG
TMP86C407MG
TMP86C807MG
TMP86F807MG
TMP86P807MG
TMP86C408DMG
TMP86C408IDMG
TMP86C408SDMG
TMP86C808DMG
TMP86C808IDMG
TMP86C808SDMG
TMP86F808DMG
TMP86P808DMG
TMP86C809NG
TMP86CH09NG
TMP86FH09AMG
TMP86FH09ANG
TMP86F409NG
TMP86CH12MG
TMP86FH12AMG **
Package
DIP20
SOP20
Emulation Chip
*2
Controller
RTE870/C model 15 In-Circuit Emulation System
model 15 In-Circuit Emulator
Target Connection
Interface Module
Emulation Module
Board *3
TMP86C908XB
LQFP44 (10 x 10)
Accessory
MCU Mount Adapter
/IC Socket
BMP86D020NA0A

BMP86D020MC0A
IC253-020-0004-B
BMP86D044DE0A
PN210020A
Emulation Chip
*2
RTE870/C In-Circuit Emulation System
Accessory
In-Circuit Emulator
Bump Socket *4
Probe Set *4
(MCU Mount Adapter)
TMP86C908XBG
*5
TMP86C906XB
AP20D3W-2

AP20S3T-2
BM-20S3T
AP44QP
BM-44Q10P
TMP86C906XBG
SDIP42
BMP86D042NB0A

AP42D0U-2

SDIP28
BMP86D028NB0A

AP28D4U

BMP86D028MC0A
IC253-028-0003-B
AP28S9T
BM-28S9T
AP30S3N-2
BM-30S3N
AP32D4U

AP32S9T
BM-32S9T
AP32D4U

AP30S3N
BM-30S3N
BMP86A200010B
BM1040R0B-G
SOP28
BMP86A100010B
*5
TMP86C908XB
TMP86C908XBG
SSOP30
SDIP32
TMP86C909XB
SOP32

SDIP32
TMP86C909XB
SSOP30
BMP86A200020A



BM1040R0B-G
BMP86A100010B
BMP86A200020A



IC253-030-0002-B
BMP86D032NB0A


TMP86C912XB

BMP86D030MF1A
*5

BMP86D032NB0A

BMP86D030MF0A
IC253-030-0002-B


HW86EG000AG
TMP86C909XBG
*5
TMP86C912XBG




**: Under development
: Under planning
29
2011/9 SCE0004L
TLCS-870/C Series (2/4)
● Choose either the RTE870/C model 15 In-Circuit Emulation system or the RTE870/C In-Circuit Emulation system.
● The TLCS-870/C Series software products run on the Japanese or English Microsoft® Windows® 2000, Microsoft® Windows® XP and Microsoft® Windows Vista®.
Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
● For the supported Programming tools, see the section “Programming Tools”.
● Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
*1: The controller and In-Circuit Emulator comes with a single-seat download license for the Integrated Development Environment.
*2: The emulation chip is specifically designed for each target MCU. For availability status, contact your local Toshiba sales representative.
*3: One QFP adaptor and one pin protector are supplied with each QFP packaged product.
When you purchase additional QFP adaptors or pin protectors, check their part numbers in the section “Spare Parts from Toshiba.”
*4: These are ADLINKS’s products.
□Software Products
Toshiba Integrated Development Environment
C Compiler
Integrated Development Environment *1
SW00MN0-ZCC: 1 license
SW00MN3-ZCC: 10 licenses
SW89CN0-ZCC: 1 license
SW89CN3-ZCC: 10 licenses
□Hardware Products
Target MCU
Part Number
TMP86C420UG
TMP86C820UG
TMP86P820UG
TMP86C420FG
TMP86C820FG
TMP86P820FG
TMP86CH21AUG
TMP86CH21FG
TMP86CH22UG
TMP86PH22UG
TMP86CM23AUG
TMP86CP23AUG
TMP86FS23AUG **
TMP86PM23UG
TMP86PS23UG
TMP86FP24FG
TMP86CS25ADFG
TMP86CM25AFG
TMP86CS25AFG
TMP86FM25FG
TMP86PS25FG
TMP86CM27FG
TMP86CP27AFG
TMP86FS27FG
TMP86PS27FG
TMP86CS28DFG
TMP86FS28ADFG **
TMP86CS28FG
TMP86FS28AFG **
Package
Emulation Chip
*2
Controller
RTE870/C model 15 In-Circuit Emulation System
model 15 In-Circuit Emulator
Target Connection
Interface Module
Emulation Module
Board *3
LQFP64 (10 x 10)
QFP64 (14 x 14)
TMP86C929AXB
BM1040R0B-G
LQFP64 (10 x 10)
BMP86A100010B
BMP86A200010B
QFP64 (14 x 14)
LQFP44 (10 x 10)
RTE870/C In-Circuit Emulation System
Accessory
MCU Mount Adapter
/IC Socket
BMP86D064DG0A
PN210033
BMP86D064DE0A
PN210026
BMP86D064DG0A
PN210033
BMP86D064DE0A
PN210026
BMP86D044DE1A
PN210020A
TMP86C923XB
LQFP64 (10 x 10)
LQFP80 (12 x 12)
In-Circuit Emulator
TMP86C929AXBG
HW86EG000AG
Accessory
Bump Socket *4
Probe Set *4
(MCU Mount Adapter)
AP64QM
BM-64Q10M
AP64QP
BM-64Q14P
AP64QM
BM-64Q10M
AP64QP
BM-64Q14P
AP44QP-2
BM-44Q10P
AP64QM
BM-64Q10M
TMP86C923XBG
BMP86D064DG0A
PN210033







TMP86C923XB
BMP86A200010B
BMP86D064DG0A
PN210033
TMP86C923XBG
HW86EG000AG
AP64QM
BM-64Q10M
TMP86C948XB
BMP86A200030A





LQFP100 (14 x 14)
QFP100 (14 x 20)
Emulation Chip
*2
TMP86C925XB
BMP86A200020A
BM1040R0B-G
BMP86A100010B
BMP86D080DG1A
PN210008
BMP86D100DG0A
PN210023
BMP86D100FF0A
PN210005A
TMP86C925XBG


AP100QM-2
BM-100Q14M
AP100QN
BM-100Q142N
AP80QP
BM-80Q142P
AP80QM
BM-80Q12M
HW86EG000AG
QFP80 (14 x 20)
LQFP80 (12 x 12)
QFP80 (14 x 20)
TMP86C927XB
BMP86A200010B
TMP86C989XB
BMP86D080FE0A
PN210002
TMP86C927XBG
BMP86D080DG0A
PN210008
TMP86C989XBG





BM-80Q142P





TMP86C989XB
BM1040R0B-G
BMP86A100010B
BMP86A200010B
BMP86D080FE0A
PN210002
TMP86C989XBG
HW86EG000AG
AP80QP










**: Under development
: Under planning
30
2011/9 SCE0004L
TLCS-870/C Series (3/4)
● Choose either the RTE870/C model 15 In-Circuit Emulation system or the RTE870/C In-Circuit Emulation system.
● The TLCS-870/C Series software products run on the Japanese or English Microsoft® Windows® 2000, Microsoft® Windows® XP and Microsoft® Windows Vista®.
Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
● For the supported Programming tools, see the section “Programming Tools”.
● Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
*1: The controller and In-Circuit Emulator comes with a single-seat download license for the Integrated Development Environment.
*2: The emulation chip is specifically designed for each target MCU. For availability status, contact your local Toshiba sales representative.
*3: One QFP adaptor and one pin protector are supplied with each QFP packaged product.
When you purchase additional QFP adaptors or pin protectors, check their part numbers in the section “Spare Parts from Toshiba.”
*4: These are ADLINKS’s products.
*5: These are top covers for IC packages. These are Tokyo Eletech’s products.
□Software Products
Toshiba Integrated Development Environment
C Compiler
Integrated Development Environment *1
SW00MN0-ZCC: 1 license
SW00MN3-ZCC: 10 licenses
SW89CN0-ZCC: 1 license
SW89CN3-ZCC: 10 licenses
□Hardware Products
RTE870/C model 15 In-Circuit Emulation System
model 15 In-Circuit Emulator
Target MCU
Part Number
TMP86C829BUG
TMP86CH29BUG
TMP86CM29BUG
TMP86CM29LUG
TMP86FM29LUG
TMP86FM29UG
TMP86PM29BUG
TMP86C829BFG
TMP86CH29BFG
TMP86CM29BFG
TMP86FM29FG
TMP86PM29BFG
TMP86CS44UG
TMP86PS44UG
TMP86CH46ANG
TMP86FH46BNG
TMP86PH46NG
TMP86PM46NG
TMP86C847IUG
TMP86C847SUG
TMP86C847UG
TMP86CH47AUG
TMP86CH47IUG
TMP86CH47SUG
TMP86CM47AUG
TMP86FH47BUG
TMP86PH47UG
TMP86PM47AUG
Package
Emulation Chip
*2
Controller
Interface Module
Emulation Module
LQFP64 (10 x 10)
Target Connection
Board *3
BMP86D064DG0A
RTE870/C In-Circuit Emulation System
Accessory
MCU Mount Adapter
/IC Socket
TMP86C944XB
BM1040R0B-G
BMP86A100010B
BMP86D064DE0A
PN210026
BMP86D044DE0A
PN210020A
Bump Socket *4
(MCU Mount Adapter)
AP64QM
BM-64Q10M
AP64QP
BM-64Q14P
AP44QP
BM-44Q10P
AP42D0U-3

AP44QP
BM-44Q10P
HW86EG000AG

TMP86C947XBG
TMP86C947XB
LQFP44 (10 x 10)
TMP86C944XBG
BMP86A200010B
BMP86D042NB1A
SDIP42
Probe Set *4
TMP86C929AXBG
QFP64 (14 x 14)
SDIP42
Accessory
In-Circuit Emulator
PN210033
TMP86C929AXB
LQFP44 (10 x 10)
Emulation Chip
*2
BMP86D044DE0A
31
PN210020A
2011/9 SCE0004L
TLCS-870/C Series (4/4)
● Choose either the RTE870/C model 15 In-Circuit Emulation system or the RTE870/C In-Circuit Emulation system.
● The TLCS-870/C Series software products run on the Japanese or English Microsoft® Windows® 2000, Microsoft® Windows® XP and Microsoft® Windows Vista®.
Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
● For the supported Programming tools, see the section “Programming Tools”.
● Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
*1: The controller and In-Circuit Emulator comes with a single-seat download license for the Integrated Development Environment.
*2: The emulation chip is specifically designed for each target MCU. For availability status, contact your local Toshiba sales representative.
*3: One QFP adaptor and one pin protector are supplied with each QFP packaged product.
When you purchase additional QFP adaptors or pin protectors, check their part numbers in the section “Spare Parts from Toshiba.”
*4: These are ADLINKS’s products.
*5: One IC socket is supplied with each target connection board. IC sockets are Yamaichi Electronics’ products.
□Software Products
Toshiba Integrated Development Environment
C Compiler
Integrated Development Environment *1
SW00MN0-ZCC: 1 license
SW00MN3-ZCC: 10 licenses
SW89CN0-ZCC: 1 license
SW89CN3-ZCC: 10 licenses
□Hardware Products
Target MCU
Part Number
Package
TMP86FM48UG
TMP86FM48FG
TMP86CS49UG
TMP86FS49BUG
TMP86FS49BNG
TMP86PM49UG
TMP86CS49FG
TMP86FS49BFG
TMP86PM49FG
TMP86CS64AFG
TMP86PS64FG
TMP86CH72FG
TMP86CM72FG
TMP86PM72FG
TMP86CK74AFG
TMP86CM74AFG
TMP86PM74AFG
TMP86CH87RUG
TMP86CM87RUG
TMP86PM87RUG **
TMP86CH92IDMG
TMP86CH92SDMG **
TMP86FH92IDMG
TMP86FH92DMG
TMP86FH93NG
LQFP64 (10 x 10)
QFP64 (14 x 14)
Emulation Chip
*2
Controller
RTE870/C model 15 In-Circuit Emulation System
model 15 In-Circuit Emulator
Target Connection
Interface Module
Emulation Module
Board *3
TMP86C948XB
BMP86A200030A
BM1040R0B-G
LQFP64 (10 x 10)
TMP86C949XB
SDIP64

BMP86A100010B
BMP86A200010B


TMP86C949XB
BMP86A200010B
QFP100 (14 x 20)
TMP86C964XB
BMP86A200020A
QFP64 (14 x 14)
TMP86C972XB
QFP64 (14 x 14)
BMP86D064DG0A
PN210033
BMP86D064DE0A
PN210026
BMP86D064DG0A
PN210033

LQFP64 (10 x 10)
Accessory
MCU Mount Adapter
/IC Socket


BMP86D064DG0A
PN210033
Emulation Chip
*2
RTE870/C In-Circuit Emulation System
Accessory
In-Circuit Emulator
Bump Socket *4
Probe Set *4
(MCU Mount Adapter)
TMP86C948XBG
TMP86C949XBG
AP64QM
BM-64Q10M
AP64QP
BM-64Q14P
AP64QM
BM-64Q10M
AP64D0U-2

AP64QM
BM-64Q10M
AP64QP
BM-64Q14P
AP100QN
BM-100Q142N
AP64QP
BM-64Q14P
BMP86D064DE0A
PN210026
BMP86D100FF0A
PN210005A
TMP86C964XBG
BMP86D064DE0A
PN210026
TMP86C972XBG
BMP86D080FE0A
PN210002
TMP86C974XBG
AP80QP
BM-80Q142P
BMP86D044DE0A
PN210020A
TMP86C987XBG
AP44QP
BM-44Q10P
BMP86D030MF3A
IC253-030-0002-B
AP30S3N-4
BM-30S3N
BMP86D032NB1A

HW86EG000AG
BMP86A200010B
QFP80 (14 x 20)
TMP86C974XB
LQFP44 (10 x 10)
TMP86C987XB
BM1040R0B-G
BMP86A100010B
BMP86A200020A
SSOP30
SDIP32
TMP86C993XB
*5
TMP86C993XBG
AP32D4U-2

**: Under development
32
2011/9 SCE0004L
TLCS-870/X Series
□Software Products
Language Tool
C Compiler & Assembler Set
SW88YN0-ZCK:
SW88YN0-ZCF:
SW88YN3-ZCK:
SW88YN3-ZCF:
1 license (Japanese edition)
1 license (English edition)
10 licenses (Japanese edition)
10 licenses (English edition)
Debugger
SW88DN9-ZCK: 1 license (Japanese edition)
SW88DN9-ZCF: 1 license (English edition)
SW88DN3-ZCK: 10 licenses (Japanese edition)
SW88DN3-ZCF: 10 licenses (English edition)
□Hardware Products
Target MCU
Part Number
TMP88CH40NG
TMP88PH40NG
TMP88CH40IMG
TMP88CH40MG
TMP88PH40MG
TMP88CH41UG
TMP88PH41UG
TMP88FH41UG
TMP88CH41NG
TMP88PH41NG
TMP88PS42FG
TMP88PS42NG
TMP88CS43FG
TMP88PS43FG
TMP88FW45AFG
TMP88F846UG
TMP88CU74FG
TMP88PU74FG
TMP88CS77FG
TMP88CU77FG
TMP88PU77FG
RTE870/X model 15/25 In-Circuit Emulation System
Accessory
In-Circuit Emulator
Package
Controller
*2
Emulation Pod
MCU Probe
Package Converter
SDIP28
MCU Mount Adapter
/IC Socket
/Top Cover for IC Package
PN200004

PN200008
IC253-028-0003-B
*4

HQPACK044SA
*5
PN200001

PN100003
SOP28
LQFP44 (10 x 10)
SDIP42
BM1040R0B-G
/BM1055R0C
BM88CS43F0A-GM
TEC-044SA-PN1NQ *5
PN100002
QFP64 (14 x 20)
TEC-064RZ-T1/SET *5
SDIP64
PN110005
QFP80 (14 x 20)
TEC-080RA-T1/SET *1*5

HQPACK064RZ



HQPACK080RA178
*5
*5
QFP80 (14 x 20)
BM88FW44F0A-GM
TEC-080RA-T1/SET *1*5

HQPACK080RA178
*5
LQFP44 (10 x 10)
BM88CS43F0A-GM
TEC-044SA-PN1NQ *5

HQPACK044SA
*5
QFP80 (14 x 20)
BM88CU74F0A
PN120004
*1

PN210002
BM88CP77F0A
PN120005
*1

PN210005A
BM1055R0C
QFP100 (14 x 20)
● The TLCS-870/X Series software products run on the Japanese or English Microsoft® Windows® 2000 and Microsoft® Windows® XP.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
● One QFP adapter and one pin protector are supplied with an MCU probe or a package converter whose name begins with “PN12”.
When you purchase additional QFP adaptors or pin protectors, check their part numbers in the section “Spare Parts from Toshiba.”
● For the supported Programming tools, see the section “Programming Tools”.
● Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
*1: These are spare parts. One spare part is supplied with each emulation pod.
*2:“BM1040R0B-G/BM1055R0C” indicates that either one of them should be selected, the BM1040R0B-G when the model 15 controller is used and the BM1055R0C when the model 25 controller is used.
 For connection with the host system via RS-232C:
the BM1055R0C requires a 9-pin cross cable;
the BM1055R0B and BM1055R0A (old version) require a 25-pin straight cable;
the BM1040R0B-G requires a 25-pin straight cable.
 For connection with the emulation pod, the BM1055R0A, the old version of the controller, requires the PN300001.
*3: One IC socket is supplied with each MCU probe. IC sockets are Yamaichi Electronics’ product.
*4: One IC socket is supplied with the package converter. The IC socket is Yamaichi Electronics’ product.
*5: These areTokyo Eletech’s products.
33
2011/9 SCE0004L
TLCS-870/C1 Series
□Software Products
Toshiba Integrated Development Environment
C Compiler
Integrated Development Environment *1
SW89CN0-ZCC: 1 license
SW89CN3-ZCC: 10 licenses
SW00MN0-ZCC: 1 license
SW00MN3-ZCC: 10 licenses
□Hardware Products
RTE870/C1 On-Chip Debug Emulation
System
Target MCU
Part Number
TMP89FH00DUG
TMP89FH00WBG
TMP89FW20AUG
TMP89FW24ADFG
TMP89FW24AFG
TMP89FS28LFG
TMP89FM40NG
TMP89FH40NG
TMP89FM42UG
TMP89FM42LUG
TMP89FM42AUG
TMP89FM42KUG
TMP89FH42UG
TMP89FH42LUG
TMP89CM42UG
TMP89CH42UG
TMP89FM43KQG
TMP89FM43LQG
TMP89FM46DUG
TMP89FM46ADUG
TMP89FM46KDUG
TMP89FH46DUG
TMP89FH46LDUG
TMP89CM46DUG
TMP89CH46DUG
TMP89FS60UG
TMP89FS60FG
TMP89FM82DUG
TMP89FM82TDUG
RTE870/C1 In-Circuit Emulation System
Accessory
On-Chip Debug
Emulator
Connector *2
BMP89A400010A-G
FTSH-110-01-L-DV-K
**
**
Accessory *4
In-Circuit Emulator
Emulation Chip *3
Probe Set
Bump Socket
(MCU Mount Adapter)


AP42D0U-4

AP44QP-3
BM-44Q10P


AP48QM-3
BM-48Q7M
LQFP64 (10 x 10)
AP64QM-2
BM-64Q10M
QFP64 (14 x 14)
AP64QP-2
BM-64Q14P


Package
LQFP48 (7 x 7)
WCSP39 (3.8 x 3.8)
LQFP64 (10 x 10)
QFP80 (14 x 20)


LQFP80 (12 x 12)
QFP179 (20 x 20)
SDIP42
BMP89A400010A-G
FTSH-110-01-L-DV-K
BMP89A300010A-G
TMP89C900XBG
**
LQFP44 (10 x 10)


VQON44 (5.3 x 5.3)
BMP89A400010A-G


BMP89A300010A-G
TMP89C900XBG
FTSH-110-01-L-DV-K
LQFP48 (7 x 7)

**
BMP89A400010A-G
**

FTSH-110-01-L-DV-K

LQFP48 (7 x 7)

● Choose either the On-Chip Debug Emulator or the In-Circuit Emulator.
**: Under development
● The TLCS-870/C1 Series software products run on the Japanese or English Microsoft® Windows® 2000, Microsoft® Windows® XP and Microsoft® Windows Vista®.
Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
● For the supported Programming tools, see the section “Programming Tools”.
● Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
*1: The emulator comes with a single-seat download license for the Integrated Development Environment.
*2: One spare part is supplied with each On-Chip Debug Emulator. These are Samtec’s products. The part number shown here denotes surface mount type with keying shroud (recommended). Other mount types, such
as through-hole, and other mating options are also available.
For the specifications and purchase inquiries about this product, please contact the supplier Samtec, Inc. The recommended connector can also be purchased from it-sim corporation, Sophia Systems Co., Ltd. and
UNIDUX INC.
*3: The emulation chip is specifically designed for each target MCU. For availability status, contact your local Toshiba sales representative.
*4: These are ADLINKS’s products.
34
2011/9 SCE0004L
TLCS-900 Family (1/4)
□Software Products
Toshiba Integrated Development Environment
C Compiler
Integrated Development Environment *1
SW96CN0-ZCC: 1 license
SW96CN3-ZCC: 10 licenses
SW00MN0-ZCC: 1 license
SW00MN3-ZCC: 10 licenses
Real-Time OS (ITRON 3.0)
SW96RN2-ZCC: Object code can be freely copied.
SW96RNC-ZCC: Object code can be freely copied and comes with source code.
□Hardware Products
RTE900 model 15/25 In-Circuit Emulation System
Target MCU
Part Number
TMP91CU10FG
TMP91PW10FG
TMP91CW11FG
TMP91PW11FG
TMP91CW12AFG
TMP91CW12FG
TMP91PW12FG
TMP91C016FG
TMP91C219FG
TMP91C820AFG
TMP91CY22FG
TMP91CY22IFG
TMP91CU27FG
TMP91FW27FG
TMP91CK27UG
TMP91CP27UG
TMP91CU27UG
TMP91CU27RUG **
TMP91FW27UG
TMP91C630FG
TMP91CW40FG
TMP91FW40FG
TMP91FY42FG
TMP91CW60FG
TMP91CW60DFG
TMP91FU62FG
TMP91FU62DFG
TMP91FW64FG
TMP91FW64DFG
In-Circuit Emulator
Package
LQFP100 (14 x 14)
Controller
*2
BM1040R0B-G
/BM1055R0C
LQFP100 (14 x 14)
Accessory
Emulation Pod
BM91CU10F0B-M15
MCU Probe/Probe Set
*4
BM91CW11F0B-M15
Package Converter
MCU Mount Adapter
PN120013
*3

PN210023
PN120013
*3

PN210023
PN120013
*3

PN210023
PN120013
*3

PN210023
BM1040R0B-G
BM91CW12AF0A-M15
LQFP100 (14 x 14)
BM1040R0B-G
/BM1055R0C
BM91CW12F0A-M15
LQFP100 (14 x 14)
BM1040R0B-G
BM91C016F0A-M15
PN120013
*3

PN210023
LQFP100 (14 x 14)
BM91C219F0A-M15
PN120013
*3

PN210023
LQFP144 (16 x 16)
BM1040R0B-G
/BM1055R0C
BM91CM20F0A-M15
PN120044
*3

PN210044
LQFP100 (14 x 14)
BM1040R0B-G
BM91CW12AF0A-M15
PN120013
*3

PN210023
TEC-064SA-T2/SET
*6

HQPACK064SA
PN120013
*3
PN120065-G
PN210033
BM91C630F0A-M15
PN120013
*3

PN210023
BM91CW40F0A-M15
PN120013
*3

PN210023
BM91CW12AF0A-M15
PN210023
*5
*5
*5
QFP64 (14 x 14)
BM1040R0B-G
BM91CW12AF0A-M15
LQFP64 (10 x 10)
LQFP100 (14 x 14)
LQFP100 (14 x 14)
BM1040R0B-G
/BM1055R0C
LQFP100 (14 x 14)
BM1040R0B-G
*3
*7
*5
PN120013
*3

LQFP100 (14 x 14)
PN120013
*3

PN210023
QFP100 (14 x 20)
TEC-100RB-T1/SET
*6

HQPACK100RB179
TEC-080SD-T2/SET
*6

HQPACK080SD
*7
TEC-080RA-T2/SET
*6

HQPACK080RA178
*7
TEC-100SD-T1/SET
*6

HQPACK100SD
*7
TEC-100RB-T1/SET
*6

HQPACK100RB179
*7
LQFP80 (12 x 12)
QFP80 (14 x 20)
LQFP100 (14 x 14)
QFP100 (14 x 20)
BM1040R0B-G
/BM1055R0C
BM91CW60F0A-M15
BM91FW64F0A-GM
*7
● The TLCS-900 Family software products run on the Japanese or English Microsoft® Windows® 2000, Microsoft® Windows® XP, Microsoft® Windows Vista®.
**: Under development
Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
● The real-time OS requires a license agreement. For details, please contact your local Toshiba sales representative.
● One QFP adapter and one pin protector are supplied with an MCU probe or a package converter whose name begins with “PN12.”
When you purchase additional QFP adaptors or pin protectors, check their part numbers in the section “Spare Parts from Toshiba.”
● For the supported Programming tools, see the section “Programming Tools”.
● Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
*1: The controller comes with a single-seat download license for the Integrated Development Environment.
*2:“BM1040R0B-G/BM1055R0C” indicates that either one of them should be selected, the BM1040R0B-G when the model 15 controller is used and the BM1055R0C when the model 25 controller is used.
 For connection with the host system via RS-232C:
the BM1055R0C requires a 9-pin cross cable;
the BM1055R0B and BM1055R0A (old version) require a 25-pin straight cable;
the BM1040R0B-G requires a 25-pin straight cable.
 The previous version of the controller requires a dedicated cable shown below. For details, contact your local Toshiba sales representative.
To perform a performance analysis and a coverage measurement using the BM1055R0B with an MCU whose name begins with “TMP92”, the PN300007 is required.
BM1055R0A: The PN300001 is required. The BM1055R0A cannot be used for an MCU whose name begins with “TMP92”.
*3: These are spare parts. One spare part is supplied with each emulation pod.
*4: To operate the TMP91CU10FG at 2 V on the target board, a 2-V conversion adaptor (PN410001) is required. For information about the 2-V conversion adaptor, contact your local Toshiba sales representative.
*5: 2-V operation is not supported.
*6: These areTokyo Eletech’s products.
*7: These are top covers for IC packages. These are Tokyo Eletech’s products.
35
2011/9 SCE0004L
TLCS-900 Family (2/4)
□Software Products
Toshiba Integrated Development Environment
C Compiler
Integrated Development Environment *1
SW96CN0-ZCC: 1 license
SW96CN3-ZCC: 10 licenses
SW00MN0-ZCC: 1 license
SW00MN3-ZCC: 10 licenses
Real-Time OS (ITRON 3.0)
SW96RN2-ZCC: Object code can be freely copied.
SW96RNC-ZCC: Object code can be freely copied and comes with source code.
□Hardware Products
Emulation System
Target MCU
Part Number
TMP92C820FG
TMP92CH21FG
TMP92CM22FG
TMP92CY23FG
TMP92CY23DFG
TMP92CA25FG
TMP92CZ26AXBG
TMP92CF26AXBG
TMP92CM27FG
TMP92CD28AFG
TMP92FD28AFG
TMP92CF29AFG
TMP92CF30FG
TMP92CD54IFG
**
TMP92FD54AIFG **
TMP92CD23AFG
TMP92FD23AFG
TMP92CD23ADFG
TMP92FD23ADFG
Emulator
Package
Controller
*2
LQFP144 (16 x 16)
LQFP100 (14 x 14)
LQFP100 (14 x 14)
BM1040R0B-G
/BM1055R0C
QFP100 (14 x 20)
LQFP144 (16 x 16)
FBGA228 (15 x15)
LQFP144 (16 x 16)
LQFP100 (14 x 14)
LQFP176 (20 x 20)

BM1040R0B-G
/BM1055R0C
Emulation Pod/Emulator
Communication Cable:
Connector
BM92C820F0A-M15
PN120044
*3
PN210044
*3

BM92CH21F0A-M15
PN120044
*3
PN210044
*3

BM92CM22F0A-M15
PN120013
*3
PN210023

PN120013
*3
PN210023

BM92CY23F0A-M15
TEC-100RB-T1/SET
*4
HQPACK100RB179
*4

BM92CA25F0A-M15
PN120044
*3
PN210044
*3

HW92DG000AG


BM92CM27F0A-M15
PN120044
*3
PN210044
BM92CD28F0A-GM
PN120013
*3
PN210023

HW92DG000AG
 BMC92CF29F0A-G
LQFP100 (14 x 14)
BM1040R0B-G
/BM1055R0C
BM92CY54F0A-M15
LQFP100 (14 x 14)

LQFP176 (20 x 20)
MCU Probe/Probe Set
Accessory
MCU Mount Adapter
/ Top Cover for IC Package
*7

FTSH-110-01-L-DV-K
*3
*5 *6


HQPACK176SE
*4


PN120013
*3
PN210023
TEC-100SD-T1/SET
*4
HQPACK100SD
*4

TEC-100RB-T1/SET
*4
HQPACK100RB179
*4

HW92ES230AG
QFP100 (14 x 20)

● The TLCS-900 Family software products run on the Japanese or English Microsoft® Windows® 2000, Microsoft® Windows® XP, Microsoft® Windows Vista®.
**: Under development
Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
● The real-time OS requires a license agreement. For details, please contact your local Toshiba sales representative.
● One QFP adapter and one pin protector are supplied with an MCU probe or a package converter whose name begins with “PN12.”
When you purchase additional QFP adaptors or pin protectors, check their part numbers in the section “Spare Parts from Toshiba.”
● For the supported Programming tools, see the section “Programming Tools”.
● Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
*1: The controller comes with a single-seat download license for the Integrated Development Environment.
*2:“BM1040R0B-G/BM1055R0C” indicates that either one of them should be selected, the BM1040R0B-G when the model 15 controller is used and the BM1055R0C when the model 25 controller is used.
 For connection with the host system via RS-232C:
the BM1055R0C requires a 9-pin cross cable;
the BM1055R0B and BM1055R0A (old version) require a 25-pin straight cable;
the BM1040R0B-G requires a 25-pin straight cable.
 The previous version of the controller requires a dedicated cable shown below. For details, contact your local Toshiba sales representative.
To perform a performance analysis and a coverage measurement using the BM1055R0B with an MCU whose name begins with “TMP92”, the PN300007 is required.
BM1055R0A: The PN300001 is required. The BM1055R0A cannot be used for an MCU whose name begins with “TMP92”.
*3: These are spare parts. One spare part is supplied with each emulation pod.
*4: These areTokyo Eletech’s products.
*5: These are Samtec’s products. The part number shown here denotes surface mount type with keying shroud (recommended). Other mount types, such as through-hole, and other mating options are also available.
For the specifications and purchase inquiries about this product, please contact the supplier Samtec, Inc. The recommended connector can also be purchased from it-sim corporation, Sophia Systems Co., Ltd. and
UNIDUX INC.
*6: One spare part is supplied with each emulator.
*7: The BMC92CF29F0A-G is an in-circuit adaptor and should be purchased together with the emulator.
36
2011/9 SCE0004L
TLCS-900 Family (3/4)
□Software Products
Toshiba Integrated Development Environment
C Compiler
Integrated Development Environment *1
SW96CN0-ZCC: 1 license
SW96CN3-ZCC: 10 licenses
SW00MN0-ZCC: 1 license
SW00MN3-ZCC: 10 licenses
Real-Time OS (ITRON 3.0)
SW96RN2-ZCC: Object code can be freely copied.
SW96RNC-ZCC: Object code can be freely copied and comes with source code.
□Hardware Products
RTE900 model 15/25 In-Circuit Emulation System
Target MCU
Part Number
TMP93CS20FG
TMP93PW20AFG
TMP93CS36UG
TMP93CW40DFG
TMP93PW40DFG
TMP93CW41DFG
TMP93PS44FG
TMP93CW44DFG
TMP93PW44ADFG
In-Circuit Emulator
Package
Controller
*2
Accessory
Emulation Pod
MCU Probe
Package Converter
MCU Mount Adapter
LQFP144 (16 x 16)
BM93CS20F0B-M15
PN120044
*3

PN210044
LQFP44 (10 x 10)
BM93CS32F0B-M15
PN120039A
*3
PN120063
PN210020A
BM93CM40F0C-M15
PN120013
*3

PN210023
PN120042
*3

PN210008

PN210002
LQFP100 (14 x 14)
LQFP100 (14 x 14)
BM1040R0B-G
/BM1055R0C
LQFP80 (12 x 12)
QFP80 (14 x 20)
BM93CS44F0B-M15
PN120009
● The TLCS-900 Family software products run on the Japanese or English Microsoft® Windows® 2000, Microsoft® Windows® XP, Microsoft® Windows Vista®.
Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
● The real-time OS requires a license agreement. For details, please contact your local Toshiba sales representative.
● One QFP adapter and one pin protector are supplied with an MCU probe or a package converter whose name begins with “PN12.”
When you purchase additional QFP adaptors or pin protectors, check their part numbers in the section “Spare Parts from Toshiba.”
● For the supported Programming tools, see the section “Programming Tools”.
● Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
*1: The controller comes with a single-seat download license for the Integrated Development Environment.
*2:“BM1040R0B-G/BM1055R0C” indicates that either one of them should be selected, the BM1040R0B-G when the model 15 controller is used and the BM1055R0C when the model 25 controller is used.
 For connection with the host system via RS-232C:
the BM1055R0C requires a 9-pin cross cable;
the BM1055R0B and BM1055R0A (old version) require a 25-pin straight cable;
the BM1040R0B-G requires a 25-pin straight cable.
 The previous version of the controller requires a dedicated cable shown below. For details, contact your local Toshiba sales representative.
To perform a performance analysis and a coverage measurement using the BM1055R0B with an MCU whose name begins with “TMP92”, the PN300007 is required.
BM1055R0A: The PN300001 is required. The BM1055R0A cannot be used for an MCU whose name begins with “TMP92”.
These are spare parts. One spare part is supplied with each emulation pod.
*3: These are spare parts. One spare part is supplied with each emulation pod.
37
2011/9 SCE0004L
*3
TLCS-900 Family (4/4)
□Software Products
Toshiba Integrated Development Environment
C Compiler
Integrated Development Environment *1
SW96CN0-ZCC: 1 license
SW96CN3-ZCC: 10 licenses
SW00MN0-ZCC: 1 license
SW00MN3-ZCC: 10 licenses
Real-Time OS (ITRON 3.0)
SW96RN2-ZCC: Object code can be freely copied.
SW96RNC-ZCC: Object code can be freely copied and comes with source code.
□Hardware Products
RTE900 model 15/25 In-Circuit Emulation System
Target MCU
Part Number
TMP94C251ADFG
TMP95C001FG
TMP95C061BDFG
In-Circuit Emulator
Package
Controller
*2
LQFP144 (20 x 20)
BM1056R0B
QFP64 (14 x 14)
BM1040R0B-G
/BM1055R0C
LQFP100 (14 x 14)
TMP95C061BFG
QFP100 (14 x 14)
TMP95C063DFG
TMP95CS64FG
TMP95PW64FG
TMP95C265FG
TMP95CW65FG
TMP95CS66FG
TMP96C041BFG
TMP96C141BFG
LQFP144 (20 x 20)
LQFP100 (14 x 14)
LQFP100 (14 x 14)
BM10R0B-G
/BM1055R0C
BM1040R0B-G
/BM1055R0C
Accessory
Emulation Pod
##
MCU Probe
Package Converter
MCU Mount Adapter
BM94C251F0A
PN120050
*3

PN210036
BM95C001F0B-M15
PN120039A
*3

PN210026
BM95C061F0C-M15
PN120013
*3

PN210023
BM95C061F0C-M15
PN120013
*3

PN210023
BM95C063F0B-M15
PN120027
*3

PN210036
BM95CS64F0B-M15
PN120013
*3

PN210023
BM96C141F0D-M15
PN120009
*3

PN210002
LQFP100 (14 x 14)
QFP80 (14 x 20)
BM1040R0B-G
/BM1055R0C
● The TLCS-900 Family software products run on the Japanese or English Microsoft® Windows® 2000, Microsoft® Windows® XP, Microsoft® Windows Vista®.
Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
● The real-time OS requires a license agreement. For details, please contact your local Toshiba sales representative.
● One QFP adapter and one pin protector are supplied with an MCU probe or a package converter whose name begins with “PN12.”
When you purchase additional QFP adaptors or pin protectors, check their part numbers in the section “Spare Parts from Toshiba.”
● For the supported Programming tools, see the section “Programming Tools”.
● Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
##: Contact your local Toshiba sales representative before ordering products.
*1: The controller comes with a single-seat download license for the Integrated Development Environment (excluding the BM1056R0B).
*2:“BM1040R0B-G/BM1055R0C” indicates that either one of them should be selected, the BM1040R0B-G when the model 15 controller is used and the BM1055R0C when the model 25 controller is used.
 For connection with the host system via RS-232C:
the BM1055R0C requires a 9-pin cross cable;
the BM1055R0B and BM1055R0A (old version) require a 25-pin straight cable;
the BM1040R0B-G requires a 25-pin straight cable.
 The previous version of the controller requires a dedicated cable shown below. For details, contact your local Toshiba sales representative.
To perform a performance analysis and a coverage measurement using the BM1055R0B with an MCU whose name begins with “TMP92”, the PN300007 is required.
BM1055R0A: The PN300001 is required. The BM1055R0A cannot be used for an MCU whose name begins with “TMP92”.
*3: These are spare parts. One spare part is supplied with each emulation pod.
*4: To connect the BM96C031F0A to the controller (BM1055R0B), a dedicated adaptor is required. For details, please contact your local Toshiba sales representative.
38
2011/9 SCE0004L
TX19A Series
□Software Products
Toshiba Integrated Development Environment
C Compiler
Integrated Development Environment *1
SW1ACN0-ZCC: 1 license
SW1ACN3-ZCC: 10 license
SW00MN0-ZCC: 1 license
SW00MN3-ZCC: 10 license
Real-Time OS (ITRON 4.0)
SW1ARN5-ZCC: Object code can be freely copied.
SW1ARNF-ZCC: Object code can be freely copied and comes with source code.
□Hardware Products
Target MCU
TMP19A23FYFG
TMP19A23FYXBG
TMP19A43CDXBG
TMP19A43CZXBG
TMP19A43FZXBG
TMP19A43FDXBG
TMP19A61C10XBG
TMP19A61CDXBG
TMP19A61F10XBG
TMP19A64C1DXBG
TMP19A64F20BXBG
TMP19A71CYUG
TMP19A71CYFG
TMP19A71FYFG
TMP19A71FYUG
RTE19A model 110 On-Chip Debug Emulation System
Accessory
On-Chip Debug Emulator
Communication Cable: Connector
BM1210R0A
FFSD-10-D-9.00-01-N: FTSH-110-01-F-D-K
FFSD-17-D-8.00-01-N: FTSH-117-01-F-D-K
RTE19A model 120 On-Chip Debug Emulation System
Accessory
On-Chip Debug Emulator
Communication Cable: Connector
*2
BM1211R0A
FFSD-10-D-9.00-01-N: FTSH-110-01-F-D-K
FFSD-17-D-8.00-01-N: FTSH-117-01-F-D-K
FFSD-10-D-8.00-01-N: FTSH-110-01-F-D-K
● Choose either the RTE19A model 110 On-Chip Debug Emulation system RTE19A model 120 On-Chip Debug Emulation system.
● The TX19A Series software products run on the Japanese or English Microsoft® Windows® 2000, Microsoft® Windows® XP and Microsoft® Windows Vista®.
Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
● The real-time OS requires a license agreement. For details, please contact your local Toshiba sales representative.
● For the supported Programming tools, see the section “Programming Tools”.
● Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
*1: The emulator comes with a single-seat download license for the Integrated Development Environment.
*2: These communication cables and connectors are provided by Samtec, Inc. Each emulator comes with a communication cable. If you need an additional communication cable, please contact Samtec directly.
A connector must be purchased separately. The part numbers listed here denote connectors with through-hole leads. Other options, such as surface-mount leads and ejectors, are also available.
For details, please visit Samtec’s website.
FFSD-10-D-9.00-01-N: Communication cable for EJTAG (20 pin)
FTSH-110-01-F-D-K: EJTAG Connector (20 pin)
FFSD-17-D-8.00-01-N: Communication cable for TPC (34 pin)
FTSH-117-01-F-D-K: TPC Connector (34 pin)
FFSD-10-D-8.00-01-N: Communication cable for TPD (20 pin)
FTSH-110-01-F-D-K: TPD Connector (20 pin)
39
2011/9 SCE0004L
*2
TX19A/H1 Series
□Software Products
Toshiba Integrated Development Environment
C Compiler
Integrated Development Environment *1
SW1ACN0-ZCC: 1 license
SW1ACN3-ZCC: 10 licenses
SW00MN0-ZCC: 1 license
SW00MN3-ZCC: 10 licenses
Real-Time OS (ITRON 4.0)
SW1ARN5-ZCC: Object code can be freely copied.
SW1ARNF-ZCC: Object code can be freely copied and comes with source code.
□Hardware Products
RTE19A/H1 Light On-Chip Debug Emulation System
Target MCU
TMP19A31CYFG
TMP19A33F20NG
TMP19A33F20NG-OTP
TMP19A44FDAXBG
TMP19A44FEXBG
TMP19A44F10XBG
On-Chip Debug Emulator
Accessory
Communication Cable *2
Connector *2
HW19DG100AG
HW19DG100AG
*4
FFSD-10-D-07.00-01-N
FTSH-110-01-L-DV-K
*3
HW19DG100AG
● The TX19A/H1 Series software products run on the Japanese or English Microsoft® Windows® 2000, Microsoft® Windows® XP and Microsoft® Windows Vista®.
Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
● The real-time OS requires a license agreement. For details, please contact your local Toshiba sales representative.
● Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
*1: The emulator comes with a single-seat download license for the Integrated Development Environment.
*2: These communication cables and connectors are provided by Samtec, Inc. One communication cable and one connector are supplied with each emulator.
*3: One spare part is supplied with each emulator. The part number shown here denotes surface mount type with keying shroud (recommended). Other mount types, such as through-hole, and other mating options are
also available.
For the specifications and purchase inquiries about this product, please contact the supplier Samtec, Inc. The recommended connector can also be purchased from it-sim corporation, Sophia Systems Co., Ltd. and
UNIDUX INC.
*4: The TMP19A33F20NG is required for debugging.
40
2011/9 SCE0004L
TX49 Family
□Hardware Products
Reference Board
RBTX4951
RBTX4955
RBTX4925
RBTX4937
RBTX4938
RBTX4939
RBTC86C1
RBHBK4400
Target MPU
Part Number
TMPR4951BFG-200
RBHMA4601(CE)
TMPR4955CFG-400
RBHMA4605(CE)
TMPR4925XBG-200
RBHMA4300(CE)
TMPR4937XBG-300/333
RBHMA4400(CE)
TMPR4938XBG-300/333
RBHMA4500(CE)
TX4939XBG-400
RBHMS4700(CE)
TC86C001FG(GOKU-S)
RBHPE4300(CE)

RBHBK4400(CE)
Functions
These are reference boards for evaluating the TMPR4951 and TMPR 4955 respectively. Since both the TMPR4951 and TMPR 4955 have the
SysAD Bus interface, the same board can be used for evaluation; the RBTX4951 and RBTX4955 simply come with different CPUs.
These reference boards have a system controller (SysAD bridge), a NOR flash ROM, a DIMM DRAM, an SIO, an Ethernet controller, an I/O
controller, and an EEPROM and an RTC connected to the SPI. Also, the reference boards provide an EJTAG connector, a ROM emulator
connector and an expansion connector.
This is a PCI-card-compliant reference board for evaluating the TMPR4925. This board has a CPU, a flash ROM, an SDRAM, a PCI controller,
an Ethernet controller, an SIO interface, and PCMCIA and SmartMediaTM card slots. It also provides an expansion connector.
This is a PCI-card-compliant reference board for evaluating the TMPR4937. This board has a CPU, a flash ROM, an SDRAM, an Ethernet
controller and an SIO interface. It also provides a connector that can be connected to an external AC’97 board.
This is a PCI-card-compliant reference board for evaluating the TMPR4938. This board has a CPU, a 128-MB SO-DIMM DRAM, a 16-MB NOR
flash ROM, a detachable 32-MB NAND flash ROM and a PCI controller. On-chip features include an Ethernet controller, a debug Ethernet, an
SIO, an ATA (IDE), an AC-Link interface, and an EEPROM and an RTC connected to the SPI. It also provides an expansion connector.
This is an ATX-compliant reference board for evaluating the TX4939. It mainly consists of two modules: an independent CPU module having a
DDR-SDRAM and an EJTAG interface, and a BASE board with a CPU module that allows the on-chip PCI, ATA, Ethernet MAC (RMII) and
Video/Audio to be evaluated.
This is a reference board is compliant with the PCI card edge specification (3.3 V, 33-MHz, 32-bit) and is used to evaluate the TC86C001FG. It
has a connector to which the ATA/ATAPI, two USB 1.1 host channels, a USB 1.1 device, I2C and SIO channels can be attached.
This is a backplane board that can be used for system evaluation in conjunction with a PCI-compliant referenced board. It consists of a
PCI-card-type CPU board and four PCI bard slots. A commercially-available ATX-compliant power supply may be used.
● Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
41
2011/9 SCE0004L
Programming Tools (1/3)
Target MCU
Family/Series
TLCS-870/C Series
●
*1:
*2:
*3:
*4:
*5:
Part Number
TMP86P203MG
TMP86P203PG
TMP86PH06NG
TMP86PH06UG
TMP86F807MG
TMP86F807NG
TMP86P807MG
TMP86P807NG
TMP86F808DMG
TMP86F808NG
TMP86P808DMG
TMP86P808NG
TMP86F409NG
TMP86FH09AMG
TMP86FH09ANG
TMP86FH12AMG
TMP86P820FG
TMP86P820UG
TMP86PH22UG
TMP86FS23AUG
TMP86PM23UG
TMP86PS23UG
TMP86FP24FG
TMP86FM25FG
TMP86PS25FG
TMP86FS27FG
TMP86PS27FG
TMP86FS28ADFG
TMP86FS28AFG
TMP86FM29FG
TMP86FM29LUG
TMP86FM29UG
TMP86PM29BFG
TMP86PM29BUG
TMP86PS44UG
TMP86FH46BNG
TMP86PH46NG
TMP86PM46NG
TMP86FH47BUG
TMP86PH47UG
TMP86PM47AUG
TMP86FM48FG
TMP86FM48UG
TMP86FS49AIFG
TMP86FS49AIUG
TMP86PM49FG
TMP86PM49UG
TMP86FS49BFG
TMP86FS49BUG
TMP86FS49BNG
TMP86PS64FG
TMP86PM72FG
TMP86PM74AFG
TMP86PM87RUG
TMP86FH92DMG
TMP86FH92IDMG
TMP86FH93NG
OTP Programming
Package
SOP20
OTP Programming Adapter
BM11704
DIP20
BM11203
SDIP42
BM11155
LQFP44 (10 x 10)
BM11656
SOP28
SDIP28
Flash Programming
Off-Board Programming *2
On-Board Programming *3
FLASH Writer: BM1401W0A-G *4
FLASH Adapter *4
Connector: FTSH-110-01-L-DV-K *5

SOP28
BM11684
SDIP28
BM11197-G


PN410117
◎
PN410119
◎


PN410118
◎
PN410119
◎


SDIP32
PN410119
◎
SOP32

◎
SSOP30
SDIP30

SSOP30
BM11683
SDIP30
BM11210
SDIP32

SSOP30
QFP64 (14 x 14)
BM11663
LQFP64 (10 x 10)
BM11662-G
LQFP44 (10 x 10)
BM11713
LQFP64 (10 x 10)

LQFP64 (10 x 10)
BM11698
LQFP64 (10 x 10)
BM11698
LQFP80 (12 x 12)

PN410119
◎








PN410107
◎
PN410111
◎
BM11672-G


QFP80 (14 x 20)

PN410104
◎
QFP80 (14 x 20)
BM11701-G


QFP100 (14 x 20)
QFP100 (14 x 20)
LQFP80 (12 x 12)


QFP80 (14 x 20)



PN410108
◎
LQFP64 (10 x 10)
PN410105A
◎
LQFP64 (10 x 10)
PN410105A
◎
QFP64 (14 x 14)
QFP64 (14 x 14)
BM11663
LQFP64 (10 x 10)
BM11662-G
LQFP44 (10 x 10)
BM11687-G


PN410110
◎


PN410109
◎


QFP64 (14 x 14)
PN410108
◎
LQFP64 (10 x 10)
PN410105A
SDIP42

SDIP42
BM11188
SDIP42
BM11188
LQFP44 (10 x 10)

LQFP44 (10 x 10)
BM11687-G
LQFP44 (10 x 10)
BM11687-G
QFP64 (14 x 14)

LQFP64 (10 x 10)
QFP64 (14 x 14)
BM11709
LQFP64 (10 x 10)
BM11708
QFP64 (14 x 14)
LQFP64 (10 x 10)

SDIP64
QFP100 (14 x 20)
BM11690
QFP64 (14 x 14)
BM11707-G
QFP80 (14 x 20)
BM11689
LQFP44 (10 x 10)
BM11687-G
SSOP30
SSOP30

SDIP32
◎






PN410108
◎
PN410105A
◎
PN410116
◎


PN410118
◎
PN410118
◎
PN410119
◎
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
: Under planning
◎: Supported
As a guideline, the adapter should be replaced after 2,000 writes.
Off-board Programming: Programs a Flash microcontroller before it is mounted on the target board.
On-board Programming: Programs a Flash microcontroller while it is mounted on the target board.
Comes with a download license for control software.
These are Samtec’s products. The part number shown here denotes surface mount type with keying shroud (recommended). Other mount types, such as through-hole, and other mating options are also available.
For the specifications and purchase inquiries about this product, please contact the supplier Samtec, Inc. The recommended connector can also be purchased from it-sim corporation, Sophia Systems Co., Ltd. and
UNIDUX INC.
42
2011/9 SCE0004L
Programming Tools (2/3)
Target MCU
Family/Series
TLCS-870/X Series
TLCS-870/C1 Series
●
*1:
*2:
*3:
*4:
*5:
Part Number
TMP88PH40MG
TMP88PH40NG
TMP88FH41UG
TMP88PH41NG
TMP88PH41UG
TMP88PS42FG
TMP88PS42NG
TMP88PS43FG
TMP88FW45AFG
TMP88F846UG
TMP88PU74FG
TMP88PU77FG
TMP89FH00DUG
TMP89FH00WBG
TMP89FW20AUG
TMP89FW24ADFG
TMP89FW24AFG
TMP89FS28LFG
TMP89FM40NG
TMP89FH40NG
TMP89FM42UG
TMP89FM42LUG
TMP89FM42AUG
TMP89FM42KUG
TMP89FH42UG
TMP89FH42LUG
TMP89FM43KQG
TMP89FM43LQG
TMP89FM46DUG
TMP89FM46ADUG
TMP89FM46KDUG
TMP89FH46DUG
TMP89FH46LDUG
TMP89FS60UG
TMP89FS60FG
TMP89FM82DUG
TMP89FM82TDUG
OTP Programming
Package
OTP Programming Adapter
SOP28
BM11695-G
SDIP28
BM11196
LQFP44 (10 x 10)

SDIP42
BM11205
LQFP44 (10 x 10)
BM11706
QFP64 (14 x 20)
BM11200
SDIP64
BM11199-G
QFP80 (14 x 20)
BM11680-G
QFP80 (14 x 20)
LQFP44 (10 x 10)

QFP80 (14 x 20)
BM11631
QFP100 (14 x 20)
BM11650
*1
Flash Programming
Off-Board Programming *2
On-Board Programming *3
FLASH Writer: BM1401W0A-G *4
FLASH Adapter *4
Connector: FTSH-110-01-L-DV-K *5


PN410109
◎


PN410104
◎
PN410109
◎


LQFP48 (7 x 7)
PN410115
◎
WCSP39 (3.8 x 3.8)

◎
LQFP64 (10 x 10)


QFP80 (14 x 20)


LQFP80 (12 x 12)


QFP179 (20 x 20)

◎
SDIP42
PN410110
◎
SDIP42
PN410110
◎
LQFP44 (10 x 10)
PN410109
◎
LQFP44 (10 x 10)
PN410109
◎
LQFP44 (10 x 10)
PN410109
◎
LQFP44 (10 x 10)
PN410109
◎
PN410109
◎
PN410109
◎
VQON44 (5.3 x 5.3)
PN410121-G
◎
VQON44 (5.3 x 5.3)
PN410121-G
◎
LQFP48 (7 x 7)
PN410115
◎
LQFP48 (7 x 7)
PN410115
◎
LQFP48 (7 x 7)
PN410115
◎
LQFP48 (7 x 7)
PN410115
◎
LQFP48 (7 x 7)
PN410115
◎
LQFP64 (10 x 10)
PN410105A
◎
QFP64 (14 x 14)
PN410108
◎
LQFP48 (7 x 7)
PN410115
◎
LQFP48 (7 x 7)
PN410115
◎
LQFP44 (10 x 10)

LQFP44 (10 x 10)
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
: Under planning
◎: Supported
As a guideline, the adapter should be replaced after 2,000 writes.
Off-board Programming: Programs a Flash microcontroller before it is mounted on the target board.
On-board Programming: Programs a Flash microcontroller while it is mounted on the target board.
Comes with a download license for control software.
These are Samtec’s products. The part number shown here denotes surface mount type with keying shroud (recommended). Other mount types, such as through-hole, and other mating options are also available.
For the specifications and purchase inquiries about this product, please contact the supplier Samtec, Inc. The recommended connector can also be purchased from it-sim corporation, Sophia Systems Co., Ltd. and
UNIDUX INC.
43
2011/9 SCE0004L
Programming Tools (3/3)
Target MCU
Family/Series
TLCS-900 Family
TX19 Family
●
*1:
*2:
*3:
*4:
*5:
Part Number
TMP91PW10FG
TMP91PW11FG
TMP91PW12FG
TMP91PW18AFG
TMP91FW27FG
TMP91FW27UG
TMP91FW40FG
TMP91FY42FG
TMP91FU62DFG
TMP91FU62FG
TMP91FW64DFG
TMP91FW64FG
TMP92FD23ADFG
TMP92FD23AFG
TMP92FD28AFG
TMP92FD54AIFG
TMP93PW20AFG
TMP93PW40DFG
TMP93PS44FG
TMP93PW44ADFG
TMP95PW64FG
TMP19A23FYFG
OTP Programming
Package
OTP Programming Adapter
LQFP100 (14 x 14)
BM11629
LQFP100 (14 x 14)
BM11629
LQFP100 (14 x 14)
BM11649
QFP80 (14 x 20)
BM11679
Flash Programming
Off-Board Programming *2
On-Board Programming *3
FLASH Writer: BM1401W0A-G *4
FLASH Adapter *4
Connector: FTSH-110-01-L-DV-K *5


QFP64 (14 x 14)
PN410108
◎
LQFP64 (10 x 10)
PN410105A
◎
LQFP100 (14 x 14)
PN410106
◎
LQFP100 (14 x 14)
PN410106
◎
QFP80 (14 x 20)
PN410104
◎
LQFP80 (12 x 12)
PN410107
◎
PN410111
◎
LQFP100 (14 x 14)
PN410106
◎
QFP100 (14 x 20)
PN410111
◎
LQFP100 (14 x 14)
PN410106
◎
LQFP100 (14 x 14)
PN410106
◎
LQFP100 (14 x 14)




LQFP100 (14 x 20)
LQFP144 (16 x 16)

BM11641
LQFP100 (14 x 14)
BM11629
LQFP80 (12 x 12)
BM11628
QFP80 (14 x 20)
BM11652
LQFP100 (14 x 14)
BM11629
LQFP144 (20 x 20)

PN410120-G
◎
◎: Supported
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
As a guideline, the adapter should be replaced after 2,000 writes.
Off-board Programming: Programs a Flash microcontroller before it is mounted on the target board.
On-board Programming: Programs a Flash microcontroller while it is mounted on the target board.
Comes with a download license for control software.
These are Samtec’s products. The part number shown here denotes surface mount type with keying shroud (recommended). Other mount types, such as through-hole, and other mating options are also available.
For the specifications and purchase inquiries about this product, please contact the supplier Samtec, Inc. The recommended connector can also be purchased from it-sim corporation, Sophia Systems Co., Ltd. and
UNIDUX INC.
44
2011/9 SCE0004L
Accessory Tools
Expendable and optional hardware items for the development system are collectively referred to as accessory tools.








MCU probe
Probe set
QFP adaptor
Pin protector
Package converter
MCU mount adaptors
Communication cable
Connector
 To provide versatility, the footprint pattern of the QFP adaptor leads is slightly different from that of an MCU. If there is a need to install both the QFP adaptor and the MCU with
an identical footprint, the board must be designed to be compatible with both of them.
 Before beginning a board design or purchasing these accessory tools, be sure to check the latest product specification, recommended footprints, etc. with each manufacturer.
 Other than those listed below, accessory tools that can be used together with the Toshiba products are available from Tokyo Eletech Corporation. Please visit Tokyo Eletech
Corporation’s website for more details.
Adlinks Corp.
Emulation Technology Inc.
Samtec Inc.
Tokyo Eletech Corp.
Tyco Electronics Corp.
Yamaichi Electronics Co., Ltd.
http://www.adlinks.co.jp
http://www.emulation.com
http://www.samtec.com
http://www.tetc.co.jp/e-index.htm
http://www.tycoelectronics.com
http://www.yamaichi.co.jp/index_e.shtml
Spare Parts from Toshiba
The TLC-870/C model 15 target connection boards, MCU probes and package converters whose part numbers begin with “PN12” come with a QFP adaptor and a pin protector. When
you purchase additional QFP adaptors or pin protectors, check their part numbers in the following Spare Parts table.
For information about spare parts for third-party accessory tools, please contact the manufacturer or distributor of each product.
 Note that if you are using a package converter, use spare parts for package converters, not those for MCU probes.
 QFP adaptors and pin protectors are available from Tokyo Eletech and Toshiba.
Target Connection Board Spare Parts
Spare Part
Part Number
QFP Adaptor
Target MCU Package
Toshiba
BMP86D044DE0A
BMP86D044DE1A
BMP86D064DE0A
BMP86D064DG0A
BMP86D080DG0A
BMP86D080DG1A
BMP86D080FE0A
BMP86D100DG0A
BMP86D100FF0A
Pin Protector
*1
Tokyo Eletech
(QFP Socket)
*3
*2
Toshiba
Tokyo Eletech
(Emulator Connector)
LQFP44 (10 x 10)
PN210019
TQPACK044SA
PN210021
TQSOCKET044SAG
QFP64 (14 x 14)
PN210025
TQPACK064SA
PN210027
TQSOCKET064SAG
LQFP64 (10 x 10)
PN210031
TQPACK064SD
PN210032
TQSOCKET064SDG
LQFP80 (12 x 12)
PN210007
TQPACK080SD
PN210009
TQSOCKET080SDG
TQSOCKET080RAG
QFP80 (14 x 20)
PN210001
TQPACK080RA
PN210003
LQFP100 (14 x 14)
PN210022
TQPACK100SD
PN210024
TQSOCKET100SDG
QFP100 (14 x 20)
PN210004
TQPACK100RB
PN210006
TQSOCKET100RBG
*1: QFP adaptors and QFP Sockets connectors are soldered onto the pc board of the target system. Once soldered, they should not be unsoldered from the pc board and resoldered.
*2: Pin protectors are sockets used to protect the target connection boards for QFPs and the pins of QFP adaptors and QFP Sockets. Be sure to use a pin protector to protect the portion where the target connection
board is connected. It is recommended to replace the pin protector or the emulator Connectors after 100 attachments and detachments.
*3: For the recommended footprints pattern, please visit Tokyo Eletech Corporation’s website.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
45
2011/9 SCE0004L
MCU Probe Spare Parts
Spare Part
Part Number
QFP Adaptor
Target MCU Package
Toshiba
PN120004
PN120005
PN120006A
PN120009
PN120011
PN120013
PN120014
PN120022
PN120023B
PN120027
PN120039A
PN120040A
PN120042
PN120044
PN120050
PN120052
PN120057
Pin Protector
*1
Tokyo Eletech
(QFP Socket)
*3
*2
Toshiba
Tokyo Eletech
(Emulator Connector)
QFP80 (14 x 20)
PN210001
TQPACK080RA
PN210003
TQSOCKET080RAG
QFP100 (14 x 20)
PN210004
TQPACK100RB
PN210006
TQSOCKET100RBG
LQFP80 (12 x 12)
PN210007
TQPACK080SD
PN210009
TQSOCKET080SDG
QFP80 (14 x 20)
PN210001
TQPACK080RA
PN210003
TQSOCKET080RAG
TQSOCKET044SAG
QFP44 (10 x 10)
PN210019
TQPACK044SA
PN210021
LQFP100 (14 x 14)
PN210022
TQPACK100SD
PN210024
TQSOCKET100SDG
QFP64 (14 x 20)
PN210010
TQPACK064RZ
PN210012
TQSOCKET064RZG
LQFP64 (10 x 10)
PN210031
TQPACK064SD
PN210032
TQSOCKET064SDG
QFP100 (14 x 20)
PN210004
TQPACK100RB
PN210006
TQSOCKET100RBG
LQFP144 (20 x 20)
PN210034
TQPACK144SD
PN210035
TQSOCKET144SDG
QFP64 (14 x 14)
PN210025
TQPACK064SA
PN210027
TQSOCKET064SAG
QFP160 (28 x 28)
PN210028
TQPACK160SB
PN210029
TQSOCKET160SBG
LQFP80 (12 x 12)
PN210007
TQPACK080SD
PN210009
TQSOCKET080SDG
LQFP144 (16 x 16)
PN210043
NQPACK144SE
PN210045
YQPACK144SE
LQFP144 (20 x 20)
PN210034
TQPACK144SD
PN210035
TQSOCKET144SDG
QFP64 (14 x 14)
PN210025
TQPACK064SA
PN210027
TQSOCKET064SAG
TQFP128 (14 x 14)
PN210053
NQPACK128SE
PN210055
YQPACK128SE
*1: QFP adaptors and QFP Sockets connectors are soldered onto the pc board of the target system. Once soldered, they should not be unsoldered from the pc board and resoldered.
*2: Pin protectors are sockets used to protect the MCU probes for QFPs and the pins of QFP adaptors and QFP sockets. Be sure to use a pin protector to protect the portion where the MCU probe is connected. It is
recommended to replace the pin protector or the emulator connectors after 100 attachments and detachments.
*3: For the recommended footprints pattern, please visit Tokyo Eletech Corporation’s website.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
Package Converter Spare Parts
Spare Part
QFP Adaptor
Part Number
Target MCU Package
Toshiba
PN120007
PN120035
PN120063
PN120065-G
Pin Protector
*1
*3
Tokyo Eletech
(QFP Socket)
Toshiba
*2
Tokyo Eletech
(Emulator Connector)
QFP64 (14 x 20)
PN210010
TQPACK064RZ
PN210012
TQSOCKET064RZG
LQFP64 (10 x 10)
PN210031
TQPACK064SD
PN210032
TQSOCKET064SDG
LQFP44 (10 x 10)
PN210019
TQPACK044SA
PN210021
TQSOCKET044SAG
LQFP64 (10 x 10)
PN210031
TQPACK064SD
PN210032
TQSOCKET064SDG
*1: QFP adaptors and QFP Sockets connectors are soldered onto the pc board of the target system. Once soldered, they should not be unsoldered from the pc board and resoldered.
*2: Pin protectors are sockets used to protect the package converters for QFPs and the pins of QFP adaptors and QFP sockets. Be sure to use a pin protector to protect the portion where the package converter is
connected. It is recommended to replace the pin protector or the emulator connectors after 100 attachments and detachments.
*3: For the recommended footprints pattern, please visit Tokyo Eletech Corporation’s website.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
MCU Mount Adaptor Spare Parts
Spare Part
Part Number
QFP Adaptor
Target MCU Package
Toshiba
PN210002
PN210005A
PN210008
PN210011A
PN210020A
PN210023
PN210026
PN210030
PN210033
PN210036
PN210044
PN210054
Pin Protector
*1
Tokyo Eletech
(QFP Socket)
*3
*2
Toshiba
Tokyo Eletech
(Emulator Connector)
QFP80 (14 x 20)
PN210001
TQPACK080RA
PN210003
TQSOCKET080RAG
QFP100 (14 x 20)
PN210004
TQPACK100RB
PN210006
TQSOCKET100RBG
LQFP80 (12 x 12)
PN210007
TQPACK080SD
PN210009
TQSOCKET080SDG
QFP64 (14 x 20)
PN210010
TQPACK064RZ
PN210012
TQSOCKET064RZG
TQSOCKET044SAG
QFP44 (10 x 10)
PN210019
TQPACK044SA
PN210021
LQFP100 (14 x 14)
PN210022
TQPACK100SD
PN210024
TQSOCKET100SDG
QFP64 (14 x 14)
PN210025
TQPACK064SA
PN210027
TQSOCKET064SAG
QFP160 (28 x 28)
PN210028
TQPACK160SB
PN210029
TQSOCKET160SBG
LQFP64 (10 x 10)
PN210031
TQPACK064SD
PN210032
TQSOCKET064SDG
LQFP144 (20 x 20)
PN210034
TQPACK144SD
PN210035
TQSOCKET144SDG
LQFP144 (16 x 16)
PN210043
NQPACK144SE


TQFP128 (14 x 14)
PN210053
NQPACK128SE


*1: QFP adaptors and QFP Sockets connectors are soldered onto the pc board of the target system. Once soldered, they should not be unsoldered from the pc board and resoldered.
*2: Pin protectors are sockets used to protect the MCU mount adaptors for QFPs and the pins of QFP adaptors and QFP sockets. Be sure to use a pin protector to protect the portion where the MCU mount adaptor is
connected. It is recommended to replace the pin protector or the emulator connectors after 100 attachments and detachments.
*3: For the recommended footprints pattern, please visit Tokyo Eletech Corporation’s website.
 QFP adaptors and the pin protector are not attached to the MCU mount adaptor.
 Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
46
2011/9 SCE0004L
OVERSEAS SUBSIDIARIES AND AFFILIATES
!SOF!PRIL
Toshiba America
Electronic Components, Inc.
Toshiba Electronics Europe GmbH
Toshiba Electronics Asia, Ltd.
s $àSSELDORF(EAD/FFICE
s (ONG+ONG(EAD/FFICE
s )RVINE(EADQUARTERS
4EL&AX
4EL&AX
4EL&AX
s &RANCE"RANCH
s "EIJING/FFICE
s "UFFALO'ROVE#HICAGO
4EL
4EL&AX
4EL&AX
s )TALY"RANCH
s #HENGDU/FFICE
s $ULUTH!TLANTA
4EL&AX
4EL&AX
4EL&AX
s 3PAIN"RANCH
s 1INGDAO/FFICE
s %L0ASO
4EL&AX
4EL&AX
4EL
s 5+"RANCH
Toshiba Electronics (Shenzhen) Co.,Ltd
s -ARLBOROUGH
4EL&AX
4EL&AX
4EL&AX
s 3WEDEN"RANCH
Toshiba Electronics (Shanghai) Co., Ltd.
s 0ARSIPPANY
4EL&AX
s 3HANGHAI058)"RANCH
4EL&AX
Toshiba Electronics Asia (Singapore) Pte. Ltd.
4EL&AX
s 3AN*OSE
4EL&AX
s (ANGZHOU/FFICE
4EL&AX
Toshiba Electronics Service (Thailand) Co., Ltd.
4EL&AX
s 7IXOM$ETROIT
4EL&AX
s .ANJING/FFICE
4EL&AX
Toshiba Electronics Trading (Malaysia) Sdn. Bhd.
4EL&AX
s "LOOMINGTON
s +UALA,UMPUR(EAD/FFICE
Toshiba Electronics (Dalian) Co., Ltd.
4EL&AX
4EL&AX
4EL&AX
s 3AN$IEGO
s 0ENANG/FFICE
Tsurong Xiamen Xiangyu Trading Co., Ltd.
4EL&AX
4EL&AX
4EL&AX
Toshiba Electronics do Brasil Ltda.
Toshiba India Private Ltd.
Toshiba Electronics Korea Corporation
4EL&AX
4EL&AX
s 3EOUL(EAD/FFICE
4EL&AX
s $AEGU/FFICE
4EL&AX
Toshiba Electronics Taiwan Corporation
s 4AIPEI(EAD/FFICE
4EL&AX
4OSHIBA #ORPORATION AND ITS SUBSIDIARIES AND AFFILIATES COLLECTIVELY h4/3()"!v RESERVE THE RIGHT TO MAKE CHANGES TO THE INFORMATION IN THIS DOCUMENT AND RELATED HARDWARE
SOFTWAREANDSYSTEMSCOLLECTIVELYh0RODUCTvWITHOUTNOTICE
4HIS DOCUMENT AND ANY INFORMATION HEREIN MAY NOT BE REPRODUCED WITHOUT PRIOR WRITTEN PERMISSION FROM 4/3()"! %VEN WITH 4/3()"!S WRITTEN PERMISSION REPRODUCTION IS
PERMISSIBLEONLYIFREPRODUCTIONISWITHOUTALTERATIONOMISSION
4HOUGH4/3()"!WORKSCONTINUALLYTOIMPROVE0RODUCTgSQUALITYANDRELIABILITY0RODUCTCANMALFUNCTIONORFAIL#USTOMERSARERESPONSIBLEFORCOMPLYINGWITHSAFETYSTANDARDSAND
FORPROVIDINGADEQUATEDESIGNSANDSAFEGUARDSFORTHEIRHARDWARESOFTWAREANDSYSTEMSWHICHMINIMIZERISKANDAVOIDSITUATIONSINWHICHAMALFUNCTIONORFAILUREOF0RODUCTCOULD
CAUSE LOSS OF HUMAN LIFE BODILY INJURY OR DAMAGE TO PROPERTY INCLUDING DATA LOSS OR CORRUPTION "EFORE CUSTOMERS USE THE 0RODUCT CREATE DESIGNS INCLUDING THE 0RODUCT OR
INCORPORATE THE 0RODUCT INTO THEIR OWN APPLICATIONS CUSTOMERS MUST ALSO REFER TO AND COMPLY WITH A THE LATEST VERSIONS OF ALL RELEVANT 4/3()"! INFORMATION INCLUDING WITHOUT
LIMITATION THIS DOCUMENT THE SPECIFICATIONS THE DATA SHEETS AND APPLICATION NOTES FOR 0RODUCT AND THE PRECAUTIONS AND CONDITIONS SET FORTH IN THE 4/3()"! 3EMICONDUCTOR
2ELIABILITY(ANDBOOKANDBTHEINSTRUCTIONSFORTHEAPPLICATIONWITHWHICHTHE0RODUCTWILLBEUSEDWITHORFOR#USTOMERSARESOLELYRESPONSIBLEFORALLASPECTSOFTHEIROWNPRODUCT
DESIGNORAPPLICATIONSINCLUDINGBUTNOTLIMITEDTOADETERMININGTHEAPPROPRIATENESSOFTHEUSEOFTHIS0RODUCTINSUCHDESIGNORAPPLICATIONSBEVALUATINGANDDETERMININGTHE
APPLICABILITYOFANYINFORMATIONCONTAINEDINTHISDOCUMENTORINCHARTSDIAGRAMSPROGRAMSALGORITHMSSAMPLEAPPLICATIONCIRCUITSORANYOTHERREFERENCEDDOCUMENTSANDC
VALIDATINGALLOPERATINGPARAMETERSFORSUCHDESIGNSANDAPPLICATIONSTOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
0RODUCTISINTENDEDFORUSEINGENERALELECTRONICSAPPLICATIONSEGCOMPUTERSPERSONALEQUIPMENTOFFICEEQUIPMENTMEASURINGEQUIPMENTINDUSTRIALROBOTSANDHOMEELECTRONICS
APPLIANCESORFORSPECIFICAPPLICATIONSASEXPRESSLYSTATEDINTHISDOCUMENT0RODUCTISNEITHERINTENDEDNORWARRANTEDFORUSEINEQUIPMENTORSYSTEMSTHATREQUIREEXTRAORDINARILY
HIGH LEVELS OF QUALITY ANDOR RELIABILITY ANDOR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN LIFE BODILY INJURY SERIOUS PROPERTY DAMAGE OR SERIOUS PUBLIC IMPACT
h5NINTENDED5SEv5NINTENDED5SEINCLUDESWITHOUTLIMITATIONEQUIPMENTUSEDINNUCLEARFACILITIESEQUIPMENTUSEDINTHEAEROSPACEINDUSTRYMEDICALEQUIPMENTEQUIPMENT
USED FOR AUTOMOBILES TRAINS SHIPS AND OTHER TRANSPORTATION TRAFFIC SIGNALING EQUIPMENT EQUIPMENT USED TO CONTROL COMBUSTIONS OR EXPLOSIONS SAFETY DEVICES ELEVATORS AND
ESCALATORSDEVICESRELATEDTOELECTRICPOWERANDEQUIPMENTUSEDINFINANCERELATEDFIELDS$ONOTUSE0RODUCTFOR5NINTENDED5SEUNLESSSPECIFICALLYPERMITTEDINTHISDOCUMENT
$ONOTDISASSEMBLEANALYZEREVERSEENGINEERALTERMODIFYTRANSLATEORCOPY0RODUCTWHETHERINWHOLEORINPART
0RODUCTSHALLNOTBEUSEDFORORINCORPORATEDINTOANYPRODUCTSORSYSTEMSWHOSEMANUFACTUREUSEORSALEISPROHIBITEDUNDERANYAPPLICABLELAWSORREGULATIONS
4HEINFORMATIONCONTAINEDHEREINISPRESENTEDONLYASGUIDANCEFOR0RODUCTUSE.ORESPONSIBILITYISASSUMEDBY4/3()"!FORANYINFRINGEMENTOFPATENTSORANYOTHERINTELLECTUAL
PROPERTYRIGHTSOFTHIRDPARTIESTHATMAYRESULTFROMTHEUSEOF0RODUCT.OLICENSETOANYINTELLECTUALPROPERTYRIGHTISGRANTEDBYTHISDOCUMENTWHETHEREXPRESSORIMPLIEDBY
ESTOPPELOROTHERWISE
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM
EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR
INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA,
AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING
WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
0RODUCTMAYINCLUDEPRODUCTSUSING'A!S'ALLIUM!RSENIDE'A!SISHARMFULTOHUMANSIFCONSUMEDORABSORBEDWHETHERINTHEFORMOFDUSTORVAPOR(ANDLEWITHCAREANDDO
NOTBREAKCUTCRUSHGRINDDISSOLVECHEMICALLYOROTHERWISEEXPOSE'A!SIN0RODUCT
$O NOT USE OR OTHERWISE MAKE AVAILABLE 0RODUCT OR RELATED SOFTWARE OR TECHNOLOGY FOR ANY MILITARY PURPOSES INCLUDING WITHOUT LIMITATION FOR THE DESIGN DEVELOPMENT USE
STOCKPILINGORMANUFACTURINGOFNUCLEARCHEMICALORBIOLOGICALWEAPONSORMISSILETECHNOLOGYPRODUCTSMASSDESTRUCTIONWEAPONS0RODUCTANDRELATEDSOFTWAREANDTECHNOLOGY
MAY BE CONTROLLED UNDER THE *APANESE &OREIGN %XCHANGE AND &OREIGN 4RADE ,AW AND THE 53 %XPORT !DMINISTRATION 2EGULATIONS %XPORT AND REEXPORT OF 0RODUCT OR RELATED
SOFTWAREORTECHNOLOGYARESTRICTLYPROHIBITEDEXCEPTINCOMPLIANCEWITHALLAPPLICABLEEXPORTLAWSANDREGULATIONS
0RODUCTMAYINCLUDEPRODUCTSSUBJECTTOFOREIGNEXCHANGEANDFOREIGNTRADECONTROLLAWS
0LEASECONTACTYOUR4/3()"!SALESREPRESENTATIVEFORDETAILSASTOENVIRONMENTALMATTERSSUCHASTHE2O(3COMPATIBILITYOF0RODUCT0LEASEUSE0RODUCTINCOMPLIANCEWITHALL
APPLICABLELAWSANDREGULATIONSTHATREGULATETHEINCLUSIONORUSEOFCONTROLLEDSUBSTANCESINCLUDINGWITHOUTLIMITATIONTHE%52O(3$IRECTIVE4/3()"!ASSUMESNOLIABILITYFOR
DAMAGESORLOSSESOCCURRINGASARESULTOFNONCOMPLIANCEWITHAPPLICABLELAWSANDREGULATIONS
)NADDITIONTOTHEABOVETHEFOLLOWINGAREAPPLICABLEONLYTODEVELOPMENTTOOLS
4HOUGH4/3()"!WORKSCONTINUALLYTOIMPROVE0RODUCTSQUALITYANDRELIABILITY0RODUCTCANMALFUNCTIONORFAIL5SETHE0RODUCTINAWAYWHICHMINIMIZESRISKANDAVOIDSITUATIONS
INWHICHAMALFUNCTIONORFAILUREOF0RODUCTCOULDCAUSELOSSOFHUMANLIFEBODILYINJURYORDAMAGETOPROPERTYINCLUDINGDATALOSSORCORRUPTION&ORUSINGTHE0RODUCTCUSTOMERS
MUSTALSOREFERTOANDCOMPLYWITHTHELATESTVERSIONSOFALLRELEVANT4/3()"!INFORMATIONINCLUDINGWITHOUTLIMITATIONTHISDOCUMENTTHEINSTRUCTIONMANUALTHESPECIFICATIONSTHE
DATASHEETSFOR0RODUCT
0RODUCTISPROVIDEDSOLELYFORTHEPURPOSEOFPERFORMINGTHEFUNCTIONALEVALUATIONOFASEMICONDUCTORPRODUCT0LEASEDONOTUSE0RODUCTFORANYOTHERPURPOSEINCLUDINGWITHOUT
LIMITATIONEVALUATIONINHIGHORLOWTEMPERATUREORHUMIDITYANDVERIFICATIONOFRELIABILITY
$ONOTINCORPORATE0RODUCTINTOYOURPRODUCTSORSYSTEM0RODUCTSAREFORYOUROWNUSEANDNOTFORSALELEASEOROTHERTRANSFER
2011
Semiconductor & Storage Products Company
Website: http://www.semicon.toshiba.co.jp/eng
47
2011/9 SCE0004L
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Toshiba:
BM1401W0A-G
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement