Baxall Pyramid 2 Product guide

Product Guide
March 2003
Contents
Click an entry to jump to the
appropriate page.
Introduction
4
Cameras
Selecting a camera
6
CDH6223 Range - Day/Night Camera
8
CDR Range - Remote Control Cameras
10
CDX9000 Range - EXview DSP Cameras
12
CDSP9000 Range - Colour & Mono DSP Cameras
14
CD9000A Range - Monochrome Camera Range
16
V Range - Colour & Monochrome Cameras
18
Pro-Dome Series - Colour and Colour/Mono Mini Domes
20
Switchers
DVS Range - Desk Video Switchers
22
DVSR Range - Remote Switcher
24
Telemetry
ZTX6 Range - Telemetry Transmitter
26
ZR Range - Coaxial Telemetry Receivers
28
DVRS & multiplexers
ZMX Range - Multiplexers
30
ZMX Plus - Multiplexers with Telemetry
32
DTL Series - Digital Video Recorder
34
MDAe - Hard Disk Storage/Archive
36
DAX Range - Dome Interface
38
Matrix systems
Pyramid Range - Echelon Based Matrix System
40
Video networks
Destiny IP - Digital Network Video, Introduction
42
Destiny IP - Digital Network Video, Products
44
Acknowledgments
Hyper HAD™ and EXviewHAD™ are trademarks of the Sony Corporation.
Destiny IP™ , AutoList™, Triplex™ and Echelon™ are trademarks of Baxall Ltd.
All other brandnames and product names are trademarks, registered trademarks or trade names of their
respective holders.
The specification and price of all products and systems in this catalogue are subject to change without notice.
Excellence in design, manufacturing and
customer service
Baxall is the leading British manufacturer of high quality CCTV
equipment and video network solutions. From cameras, switchers
and receivers to the most complex systems dealing with thousands of
cameras, Baxall offer the most innovative product range available.
Committed to ensuring the highest standards are maintained from
the design and development
team right through to our
unrivalled after-sales service,
the company has gained an
enviable reputation within
the
security
reliability
industry
and
value
for
for
money.
Dedicated to innovation and total quality
The Baxall philosophy is simple: total quality in everything we do.
That commitment demands an expert team working together to
provide our customers with the products they want, when they want.
It also requires substantial investment in the latest technology to
ensure that in design and production, Baxall remains the pioneering
force in the market.
4
Products
Providing CCTV equipment of the finest
quality has been Baxall’s strength for over
20 years. Our range of cameras, receivers,
switchers,
multiplexers
and
telemetry
is unrivalled. The Baxall team of expert
engineers ensure that our products are
continually evolving to take advantage of the latest developments in
this high technology industry.
Systems
Our customers are continually demanding
more intricate solutions to the most complex
security situations. Baxall systems are well
established both in the UK and overseas,
providing high quality surveillance in
town and city centres, retail centres, educational establishments,
penal institutions and sports stadiums. Our flexibility in design and
production makes Baxall the ideal partner for overcoming unique
security challenges.
Networks
Baxall is pioneering work on transmitting
video and audio through existing networks.
The result is our Destiny range of products
that have gained several awards for
innovation. Recognising the growth of IT
and communications marketplaces, Baxall will continue to remain
at the forefront of development through the design of new video
network products.
5
Selecting the correct camera
High
resolution?
(>470TVL)
1.0 lux
or above?
Additional
features?
CDSP9310
0.8 lux
or above?
Additional
features?
CDSP9713
CDSP9311
CDSP9307
Below
0.4 lux or
using IR?
CDH6223
Remote
control?
CDR5223A
��������
���������
��������
���������
CDX9714
��������
�������
��������
CDX9742
6
Remote
control?
CDR4233A
Additional features include:
3 extra fixed white balance modes
8 discreet shutter speeds
Genlock
Flickerless
8 BLC window options*
Peak white inversion*
Y/C outputs*
CDSP9313
* CDX and CDR models only
�����
������������
�������
��������
�����������
���������
CD9210
CDSP9752
�����������
���������
CD9252A
CD9230A
CD9207
Click a camera to jump
to the appropriate page.
CDR3223A
7
CDR2233A
CDH6223 - Day/Night Camera
• Remote set-up via RS485 or
coax with OSD
• Filter switching for maximum
day/night performance
• 1/2" EXviewHAD™ CCD
• On screen menus accessible at
the camera or remotely
• 10 bit A/D for clearer images
• Peak white inversion
• Selectable auto black
Camera Features
Sensor
Effective Pixels
1/2" Sony EXviewHAD™ CCD
752 (H) x 582 (V)
Sensitivity
0.4 lux colour, 0.07 lux monochrome; for usable picture (40 IRE) with AGC
on; lens at F1.2, 80% scene reflectance
Resolution
480 TVL
Video Output
Signal to Noise Ratio
White Balance
AGC
Electronic Iris
Backlight Compensation
Gamma Correction
Shutter Speeds
Synchronisation System
Auto Black
Peak White Inversion
Camera Title
Group Settings
Group Switching
Remote Setup
1V p-p composite video via 75Ω BNC connector on the rear of the camera;
PAL: 625 lines 50 fields per second 2:1 interlace;
S-Video output: Y/C signal - Y=0.7V p-p, 75Ω C=0.3V p-p, 75Ω
Better than 48dB
3200K, 4200K, 6300K, USER (red and blue adjust) and HOLD PUSH
Off, 8,16, 18, 20, 22, 24, 32dB
1/50s~1/100,000s menu selectable
5 windows can be moved, resized and assigned weightings to allow
completely configurable BLC
5 levels
1/50, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10,000, flickerless
Full colour Genlock (H, V & SC adjustment), Internal or Line lock (360°
adjustment)
Selectable with level adjust
With adjustable threshold
12 characters, alphanumeric
Settings can be saved to 4 user groups
By menu or remotely via 9-pin D type connector
Via coax (Baxall Telemetry) or RS485
8
Lens Options
Manual
Auto Iris (video drive)
Direct Drive (DC iris)
Any ‘C’ or ‘CS’ mount 1/2", 2/3" or 1" lens. NB lens is not supplied
Via a 3 terminal, quick release connector at the rear of the camera
4-pin square type socket on the side of the camera
Power Supply
Low Voltage Only
Input Power Isolation
12~30V AC; 11~40V DC
Fully isolated power supply
Mechanical
Lens Mount
Camera Mount
Dimensions
Weight
Material
C/CS via racking back focus mechanism adjustment
1/4-20 UNC or 1/4" BSW (top or bottom)
200 (L) x 65 (H) x 81 (W) mm
0.6kg
Die-cast zinc lens mount; extruded aluminium body; flame retardant ABS
plastic front trim, rear bezel and door
Environmental
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
-10°C to +50°C (14°F to 122°F)
20% to 80% relative humidity, non condensing
-10°C to +70°C (14°F to 158°F)
20% to 90% relative humidity, non condensing
9
CDR Range - Remote Control Cameras
• Remote set-up via RS485 or
coax with OSD
• 1/3" & 1/2" models
• Colour & mono
• High resolution
• Peak white inversion
• On screen menus accessible at
the camera or remotely
Camera Features
Video Output
White Balance
AGC
Electronic Iris
Backlight Compensation
Gamma Correction
Shutter Speeds
Synchronisation System
Auto Black
Peak White Inversion
1V p-p composite video via 75Ω BNC connector on the rear of the camera;
PAL: 625 lines 50 fields per second 2:1 interlace; S-Video output (colour
models only) Y/C signal - Y=0.7V p-p, 75Ω C=0.3V p-p, 75Ω
Colour models only: auto, indoor, outdoor, fluorescent, user (Red & Blue
adjust) & push
Off, 8,16, 18, 20, 22, 24, 32dB
1/50s~1/100,000s
5 windows can be moved, resized and assigned weightings to allow
completely configurable BLC
5 levels
1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10,000 & flickerless
Full colour Genlock (H, V & SC adjustment), Internal or Line lock (360°
adjustment)
Selectable with level adjust
With adjustable threshold
Model Variations
Model
CDR2233A
CDR3223A
CDR4233A
CDR5223A
Mono
Mono(IR)
Colour
Colour
580 TVL
580 TVL
480 TVL
480 TVL
CCD Sensor Size
1/3"
1/2"
1/3"
1/2"
CCD Sensor Type
HyperHAD™
EXviewHAD™ HyperHAD™
EXviewHAD™
Sensitivity @ F1.2
0.1 lux
0.04 lux
1.0 lux
0.4 lux
752 x 582
752 x 582
752 x 582
752 x 582
>50dB
>50dB
>48dB
>48dBLe
Camera Type
Resolution
Effective Pixels
S/N Ratio
10
Lens Options
Manual
Auto Iris (video drive)
Direct Drive (DC iris)
Any ‘C’ or ‘CS’ mount 1/3" (CDR2233A and CDR4233A only), 1/2", 2/3" or 1"
lens. NB lens is not supplied
Via a 3 terminal, quick release connector at the rear of the camera
4-pin square type socket on the side of the camera
Power Supply
Low Voltage Only
Input Power Isolation
Power Consumption
12~30V AC; 11~40V DC
Fully isolated power supply
Less than 5W
Mechanical
Lens Mount
Camera Mount
Dimensions
Weight
Material
C/CS via racking back focus mechanism adjustment
1/4-20 UNC or 1/4" BSW (top or bottom)
137.5 (L) x 59.5 (H) x 65.5 (W) mm
0.35kg
Die-cast zinc lens mount; extruded aluminium body; flame retardant ABS
plastic front trim, rear bezel and door
Environmental
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
-10°C to +50°C (14°F to 122°F)
20% to 80% relative humidity, non condensing
-10°C to +70°C (14°F to 158°F)
20% to 90% relative humidity, non condensing
�����
������
11
CDX9000 - EXview DSP Cameras
• Digital signal processing
• Back focus mechanism
• 1/2" colour and mono (IR)
• Comprehensive feature set
• All lens options supported
• Configurable back light
compensation
• Peak white inversion
Generic Features
Sensor
Video Output
AGC
Electronic Iris
Backlight Compensation
Gamma Correction
Shutter Speeds
1/2" Sony EXviewHAD™ CCD
1V p-p composite video via 75Ω BNC connector on the rear of the camera;
PAL: 625 lines 50 fields per second 2:1 interlace; S-Video output (colour
models only) Y/C signal - Y=0.7V p-p, 75Ω C=0.3V p-p, 75Ω
On/Off - selectable via DIP switch
1/50s~1/100,000s - selectable On/Off via a DIP switch
Selectable On/Off - 8 user selectable windows (3 DIP switches)
DIP switch selectable: 0.45 or 1.0
1/50, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10,000 & flickerless via
3 DIP switches
White Balance Modes
Colour models only: auto, indoor, outdoor & fluorescent - selectable via 2
DIP switches
Synchronisation System
Line lock - plus option to switch to internal synchronisation via DIP switch
Genlock - BNC connector for externally generated synchronisation signal
Adjustable V Phase
Peak White Inversion
The line lock vertical phase may be adjusted by ±120°
Selectable On/Off (via DIP switch) with adjustable threshold
Model Variations
Model
CDX9742
CDX9714
CDX9772/WF
Type
Mono (IR)
Colour
Colour/Mono
Resolution
580 TVL
480 TVL
480 TVL
Sensitivity @ F1.2
0.04 lux
0.4 lux
0.4 lux
752 x 582
752 x 582
752 x 582
>50dB
>48dB
>48dB
Effective Pixels
S/N Ratio
Advanced backlight
compensation with
positional windows
12
Lens Options
Manual
Auto Iris (video drive)
Direct Drive (DC iris)
Any ‘C’ or ‘CS’ mount 1/2", 2/3" or 1" lens. NB lens is not supplied
Via a 3 terminal, quick release connector at the rear of the camera
4-pin square type socket on the side of the camera; DC level is user
defined via a potentiometer located next to the socket
Power Supply
Low Voltage Version
Mains Version
Input Power Isolation
Power Consumption
12~30V AC; 11~40V DC
98~260V AC, 50/60Hz
Fully isolated power supply
Less than 5W
Mechanical
Lens Mount
Camera Mount
Dimensions
Weight
Material
C/CS via racking back focus mechanism with two adjustment points (top & side)
1/4-20 UNC or 1/4" BSW (top or bottom)
137.5 (L) x 59.5 (H) x 65.5 (W) mm
Mains 0.6kg; low voltage 0.35kg
Die-cast zinc lens mount; extruded aluminium body; flame retardant ABS
plastic front trim, rear bezel and door
Environmental
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
-10°C to +50°C (14°F to 122°F)
20% to 80% relative humidity, non condensing
-10°C to +70°C (14°F to 158°F)
20% to 90% relative humidity, non condensing
59.5
Low Voltage Models
137.5
Mains Voltage Models
13
65.5
CDSP9000 - Colour & Mono DSP Cameras
• Digital signal processing
• 4 white balance modes
• Back focus mechanism
• 1/2" and 1/3" colour and mono
• Comprehensive feature set
• All lens options supported
Generic Features
Sensor
Video Output
AGC
Electronic Iris
Backlight Compensation
Gamma Correction
Shutter Speeds
White Balance Modes
Synchronisation System
Adjustable V Phase
Sony HyperHAD™ CCD
1V p-p composite video via 75Ω BNC connector on the rear of the camera;
PAL: 625 lines 50 fields per second 2:1 interlace
Selectable On/Off via DIP switch
1/50s~1/100,000s - selectable On/Off via a DIP switch
On/Off - selectable via a DIP switch, weighted to the centre third of scene
DIP switch selectable: 0.45 or 1.0
1/50, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10,000 & flickerless via 3 DIP
switches
Colour models only: auto, indoor, outdoor & fluorescent - selectable via 2
DIP switches
Line lock - plus option to switch to internal synchronisation via DIP switch
Genlock (mono only) - BNC connector for externally generated
synchronisation signal
The line lock vertical phase may be adjusted by ±120°
Model Variations
Model
Type
Resolution
CCD Sensor Size
Sensitivity @ F1.2
Effective Pixels
S/N ratio
CDSP9713
CDSP9752
CDSP9313
CDSP9311
CDSP9772
Colour
Mono
Colour
Colour
Colour/Mono
480 TVL
580 TVL
480 TVL
330 TVL
580 TVL
1/2"
1/2"
1/3"
1/3"
1/2"
0.8 lux
0.08 lux
1.0 lux
0.9 lux
1.0/0.08 lux
752 x 582
752 x 582
752 x 582
500 x 582
752 x 582
>48dB
>50dB
>48dB
>48dB
>48dB
14
Lens Options
Manual
Auto Iris (video drive)
Direct Drive (DC iris)
Any ‘C’ or ‘CS’ mount 1/3" (CDSP9313 &9311 only), 1/2", 2/3" or 1" lens.
NB lens is not supplied
Via a 3 terminal, quick release connector at the rear of the camera
4-pin square type socket on the side of the camera; DC level is user
defined via a potentiometer located next to the socket
Power Supply
Low Voltage Version
Mains Version
Input Power Isolation
Power Consumption
12~30V AC; 11~40V DC
230V AC +6%, -10% 50Hz
Fully isolated power supply
Less than 4W
Mechanical
Lens Mount
Camera Mount
Dimensions
Weight
Material
C/CS via racking back focus mechanism with two adjustment points (top & side)
1/4-20 UNC or 1/4" BSW (top or bottom)
122.5 (L) x 59.5 (H) x 65.5 (W) mm
Mains 0.6kg; low voltage 0.4kg
Die-cast zinc lens mount; extruded aluminium body; flame retardant ABS
plastic front trim, rear bezel and door
Environmental
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
-10°C to +50°C (14°F to 122°F)
20% to 80% relative humidity, non condensing
-10°C to +70°C (14°F to 158°F)
20% to 90% relative humidity, non condensing
15
CD9000A - Monochrome Camera Range
• Analogue monochrome camera
• CCIR (EIA available)
• 1/3" & 1/2" CCD
• High & medium resolution
Generic Features
Sensor
Video Output
Signal to Noise Ratio
Sharpness
AGC
Electronic Iris
Backlight Compensation
Gamma Correction
Shutter Speeds
Synchronisation System
Adjustable V Phase
Sony HyperHAD™ CCD
1V p-p composite video via 75W BNC connector on the rear of the camera;
CCIR: 625 lines 50 fields per second 2:1 interlace
Better than 50dB
On/Off - selectable via a DIP switch
Off/24dB/32dB - selectable via 2 DIP switches
1/50s~1/100,000s - selectable On/Off via a DIP switch
On/Off - selectable via a DIP switch, weighted to the centre third of scene
DIP switch selectable: 0.45 or 0.8
1/250, 1/500, 1/2000, 1/5000, 1/10,000, 1/100,000 and flickerless via 3 DIP switches
Line lock - plus option to switch to internal synchronisation via DIP switch
Genlock - BNC connector for externally generated synchronisation signal
The line lock vertical phase may be adjusted by ±120°
Model Variations
Model
Type
CCD Type
Resolution
Sensitivity @ F1.2
Effective Pixels (HxV)
CD9230A
CD9252A
CD9752A
Mono
Mono
Mono
1/3"
1/3"
1/2"
380 TVL
580 TVL
580 TVL
0.1 lux
0.1 lux
0.08 lux
500 x 582
752 x 582
752 x 582
16
Lens Options
Manual
Auto Iris (video drive)
Direct Drive (DC iris)
Any ‘C’ or ‘CS’ mount 1/3" (not CD9752A), 1/2", 2/3" or 1" lens. NB lens is
not supplied
Via a 3 terminal, quick release connector at the rear of the camera
4-pin square type socket on the side of the camera; DC level is user
defined via a potentiometer located next to the socket
Power Supply
Low Voltage Version
12~30V AC; 11~40V DC
Mains Version
230V AC, +6% -10%, 50Hz
Input Power Isolation
Fully isolated power supply
Power Consumption
Less than 5W
Mechanical
Lens Mount
Camera Mount
Dimensions
Weight
Material
C/CS via racking back focus mechanism with two adjustment points (top & side)
1/4-20 UNC or 1/4" BSW (top or bottom)
122.5 (L) x 59.5 (H) x 65.5 (W) mm
Mains 0.6kg; low voltage 0.35kg
Die-cast zinc lens mount; extruded aluminium body; flame retardant ABS
plastic front trim, rear bezel and door
Environmental
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
-10°C to +50°C (14°F to 122°F)
20% to 80% relative humidity, non condensing
-10°C to +70°C (14°F to 158°F)
20% to 90% relative humidity, non condensing
17
V Range - Colour & Monochrome Cameras
• Mid-range colour & mono cameras
• 1/3" CCD
• Medium & high resolution
• PAL/CCIR (NTSC/EIA available)
Generic Features
Sensor
Video Output
AGC
Electronic Iris
Backlight Compensation
Gamma Correction
Synchronisation System
Adjustable V Phase
1/3" Sony HyperHAD™ CCD
1V p-p composite video via 75Ω BNC connector on the rear of the camera;
PAL: 625 lines 50 fields per second 2:1 interlace
Built in 28dB
1/50s~1/100,000s - selectable On/Off via a DIP switch
On/Off - selectable via a DIP switch, weighted to the centre third of scene
DIP switch selectable: 0.45 or 1.0
Line lock - the option to switch to internal synchronisation is provided via a
DIP switch
The line lock vertical phase may be adjusted by ±120°
Model Variations
Model
Type
Resolution
Sensitivity @ F1.2
White Balance
Effective Pixels
S/N Ratio
CD9207
CD9210
CDSP9307
CDSP9310
Mono
Mono
Colour
Colour
380 TVL
580 TVL
330 TVL
480 TVL
0.1 lux
0.1 lux
1.0 lux
1.0 lux
N/A
N/A
Auto
Auto
500 x 582
752 x 582
500 x 582
752 x 582
>50dB
>50dB
>48dB
>48dB
18
Options
Lens Options
Manual
Auto Iris (video drive)
Direct Drive (DC iris)
Any ‘C’ or ‘CS’ mount 1/3", 1/2", 2/3" or 1" lens. NB lens is not supplied
Via 3 way, two part terminal block at the rear of the camera
4-pin square type socket on the side of the camera; DC level is user
defined via a potentiometer located next to the socket
Power Supply
Low Voltage Version
Mains Version
Input Power Isolation
Power Consumption
12~30V AC; 11~40V DC
98~260V AC, 50/60Hz
Fully isolated power supply
Less than 4W
Mechanical
Lens Mount
Camera Mount
Dimensions
Weight
Material
C/CS via racking back focus mechanism with two adjustment points (top & side)
1/4-20 UNC or 1/4" BSW (top or bottom)
122.5 (L) x 59.5 (H) x 65.5 (W) mm
Mains 0.6kg; low voltage 0.35kg
Die-cast zinc lens mount; extruded aluminium body; flame retardant ABS
plastic front trim, rear bezel and door
Environmental
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Low Voltage Models
-10°C to +50°C (14°F to 122°F)
20% to 80% relative humidity, non condensing
-10°C to +70°C (14°F to 158°F)
20% to 90% relative humidity, non condensing
Mains Voltage Models
19
Pro-Dome Series - Mini Domes
• Proportional telemetry
speed to zoom control
• Pendant, wall, direct or
false ceiling mounting
options
• Clear, smoked, gold or
silver bubble options
• Language options
• Quick and easy release
mechanism
• Multiple dynamic privacy
zone options
• Tours
Camera Features
The Baxall Pro-Dome series provides a selection of interior or exterior domes based upon the choice of either
monochrome, colour, or colour/monochrome camera modules. With easy installation, operation and maintenance
you can choose between wall, ceiling, pendant or direct mounts. 360° pan and 90° tilt operation are provided with
an auto-flip option ensuring that no blind area occurs during operation.
With a choice of maximum speeds on some models you can connect alarms to the dome that can either switch
an alarm output or trigger the dome to preset positions.
The Pro-Dome series is compatible with a range of Baxall telemetry equipment ensuring its smooth integration
into your system whatever your circumstances. It also complies with government legislation towards Dynamic
Privacy Zones (DPZ) allowing public areas to be masked as required by law.
Model variations
Product Code
BPD0
BPD1
BPD2
Type
Mono
Colour
Col/mono
Optical Zoom
16x
22x
23x
Memory
Yes
Yes
Yes
Coax/RS485
Coax/RS485
Coax/RS485
Yes
Yes
Yes
Telemetry
Network compatibility
20
Outputs
Video
Alarms
1V p-p composite video, PAL/CCIR: 625 lines, 50 fields per second, 2:1
interlace
1 output
Inputs
Telemetry
Power supply
Twisted pair and coaxial control options
24V AC, mains PSU (not included)
Alarms
1 input
Sensor
1/4" CCD
Resolution
>470 TVL
Dome features
Other Features
Digital zoom: 7:1 mono unit, 11:1 colour and colour/mono units
96 presets
3 pattern tours
8 dynamic privacy zones
8 area titles
Proportional P/T to zoom
Preset titles
Pull down menus
Controllers*
Transmitters
Keyboards
Multiplexers
Networks
ZTX6
ZKX2/K, ZKX2/J, ZKX3/J
All ZMX+ and ZMX+ matrix models (only supported with joystick keyboard)
Pyramid System and Baxall IP
*via interface models
Mechanical
Dimensions
Weight
Bubble Finishes
Colour
Internal dome: 205 x 120mm, external dome: 302 x 244mm
Internal dome: 1.36kg, external dome 3.0kg
Internal: clear*, smoked, gold or silver
External: clear* or smoked
*clear supplied, alternatives can be purchased separately
Internal dome: black
Accessories: off white
Environmental
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
-10°C to +50°C (14°F to 122°F)
20% to 80% relative humidity, non condensing
-10°C to +70°C (14°F to 158°F)
20% to 90% relative humidity, non condensing
21
DVS Range - Desk Video Switchers
• Choice of 4 or 8 camera inputs
• Camera title positioning options*
• Choice of 1 or 2 independent
monitor outputs
• Variable dwell per camera*
• Alarms as standard on all DVS2
models
• Anti-tilt mechanism
• Language options available*
• External BNC connections
• VCR lock function*
• European & NTSC versions
available
• User definable camera sequencing*
• Programmable camera titling*
Model Variations
Product Code
DVS14L
DVS14
DVS18
DVS24A
DVS28A
Camera Video Inputs
4
4
8
4
8
Monitor Video Outputs
1
1
1
2
2
5
9
6
10
Control Keys
5
Sequencing - Main Monitor
**see below
Sequencing - Spot Monitor
N/A
Dwell Adjustment
Programmable individual dwell camera enable
N/A
Global,
3~45s
N/A
Per input,
1~60s
Sequences camera inputs
in numerical order,
skipping unused inputs
Main: per input 1~60s
Spot: global 5~50s
OSD Menu
no
yes
yes
yes
yes
Built in Alarms
no
no
no
4 inputs,
1 output
8 inputs,
1 output
Programmable Titles
no
yes
yes
yes
yes
VCR Lock
no
yes
yes
yes
yes
* Not model DVS14L
**Sequences camera inputs in numerical order, skipping unused inputs
22
Input/Output
Video signals
1Vp-p composite video via coaxial cable with BNC connectors
Inputs AC coupled, maximum DC offset ± 2.7V
Power Supply
Power Supply Unit
Power Consumption
230V AC ±10% input, max. 2.4VA; 12V DC (class 2) output
Maximum 200mA, 12V DC
Mechanical
Dimensions
Weight
Material
206 (L) x 50 (H) x 127 (W) mm
0.4kg max
ABS case to UL94, Steel Base
Environmental
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
-10°C to +50°C (14°F to 122°F)
20% to 80% relative humidity, non condensing
-10°C to +70°C (14°F to 158°F)
20% to 90% relative humidity, non condensing
23
DVSR Range - Remote Switcher
• Sequences up to 16 camera inputs,
with auto skip facilities & adjustable
dwell time
• Utilises video cables for control
signals, reducing installation costs
• Channel identification by numerical
display on the picture
• Up to 6 monitor outlets, extendible,
with completely independent
viewing
• Attractive compact metal cased
controllers for desk usage
Overview
Having the capacity to accept up to 16 camera inputs and providing up to six monitor outlets
as standard, with completely independent viewing, the DVSR Remote Switcher is a simple
and economical way of installing an extendible multi channel facility. Utilising state of the art
electronics, control signals are carried along the single video cables connecting the monitors to
the Remote Unit, eliminating the need for any extra interconnecting wiring.
The Remote Unit can be mounted away from the user control area and includes all terminations,
removing the requirement for plugs on the video cable. On screen camera numbering is provided,
with auto sequencing and auto skip facilities for unused inputs and vertical interval switching
techniques incorporated in the circuitry, ensure that picture bounce between compatible cameras
is eliminated. Any camera can be omitted from any monitor at will.
24
Video
Inputs
Outputs
Switching
Up to 16 cameras with 1 Vp-p video output
Up to 4 independently controlled outlets in standard housing; additional
outlets as required to order. (Up to 6 maximum in one unit)
Switching time less than 1.0 µs
Dwell time - adjustable, 5~50 seconds approximately
Functions
Desk Control box
Remote Box
Low movement tactile press buttons providing:
Manual selection; Auto Sequence; Stop
Interval switching adjustment through rear of controller
Auto sequencing & autoskip of unused inputs
Houses motherboard and plug-in outlet cards
400m max distance between remote box and desk control box
Power Supply
Input Voltage
240V AC ±10%, 50Hz standard
Other voltages on request
Mechanical
Dimensions (L x W x D)
Weight
Material
Desk controller: 141 x 88 x 36.5 mm
Remote box: 225 x 215 x 75 mm
Desk controller: 0.3kg
Remote box: 2.8kg
Desk controller: ABS endcaps with aluminium and mild steel shell
Remote box: steel casing
Optional Alarm Card
Features
Model Variations
16 channel externally operated alarm facility combined with monitor outlet
card (daughterboard) providing 16 alarm inputs via terminal block connector
Inputs N/O as standard (N/C on request) - one common pair of volts-free
contacts (250V AC, 5A rated)
Alarm timing out period adjustable between 5~50 seconds by potentiometer
mounted on outlet card
NOTE: since the alarm card is combined with the daughterboard the
alarm option is not available on the single monitor switcher DVSR/1, which
combines the first outlet (daughterboard) with the motherboard. A single
outlet DVSR/1 with alarm option will therefore require the addition of a
daughterboard
Model
Description
DVSR/0
DVSR/1
DVSR/2
DVSR/3
DVSR/4
DVSR/5
DVSR/6
Extra monitor output
16 camera inputs, 1 monitor
16 camera inputs, 2 monitor
16 camera inputs, 3 monitor
16 camera inputs, 4 monitor
16 camera inputs, 5 monitor
16 camera inputs, 6 monitor
25
output
output
output
output
output
output
ZTX6 - Telemetry Transmitter
• Expandable matrix (8x2 modules)
max 32x8
• Control of most speed domes via
Dax converters (contact Baxall for
details)
• Networkable with Baxnet
compatible equipment (ZMX
Multiplexers, ZKX2&3 keyboards, PC
controlled software)
• Flexible alarm handling
• Defined priority access for users
• 19" rack or wall mountable
• Coaxial telemetry control for ZR
receivers
• RS485 Baxnet data (maximum 32
nodes per Baxnet)
• On-screen menus
Model Variations
Model
ZTX6/8M2
ZTX6/16M4
ZTX6/24M6
ZTX6/32M8
Video inputs
8
16
24
32
Video outputs
2
4
6
8
Alarm inputs
8
16
24
32
Alarm outputs
2
2
2
2
ZKX2/K
ZKX2/K
ZKX2/K
ZKX2/K
ZTX6/8M2/J
ZTX6/16M4/J
ZTX/24M6/J
ZTX6/32M8/J
Keyboard included
ZTX6 with joystick keyboard
26
Generic features
PAL (CCIR) composite, 1V p-p, 75Ω. NTSC (EIA) also available
20 MHz (50%)
< 5°, < 3%
-65 dB (unweighted)
Baxall simplex telemetry
120mV 222-250 KHz FSK Vertical interval synchronised
Keyboard control connection RJ45 – Baxnet with termination and bias settings
RS485
Alarm inputs 8 inputs per module NO/NC option, via removable screw terminal blocks
Alarm outputs 2 relay outputs NO/NC option, via removable screw terminal blocks
Alarm modes Last – Displays only the last alarm input
Stack – Stacks alarms on to next available monitor
Seq - Rotate
Alarm acknowledgment modes Acknowledged – Requires keyboard acknowledge to clear alarm
Timed – clears alarm after a pre-determined time or by keyboard command
Transparent (with minimum alarm time) – clears when alarm input clears.
Video Format
Video Bandwidth
Differential Phase and Gain
Signal to Noise Ratio
Coax telemetry
Power Supply
220V AC supplied via nominal 12V DC linear PSU
Power supply
Mechanical
215mm(L) x 132mm (W) x 50mm (H)
ZTX6/8M2 - 0.9kg /16M4 - 1.4kg /24M6 - 1.9kg / 32M8 - 2.4kg
Slate grey with white text
Max. Dimensions
Weight
Enclosure/colour
Environmental
-10°C to +50°C
10% to 80% relative humidity, non condensing
-20°C to +60°C
10% to 95% relative humidity, non condensing
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
������
������
�������
����������
������
Monitor A
������
������
�
Monitor B
�
Monitor C
�������
����������
������
�����
�����
�
�
�������
������
���������
������
����������
ZTX6 Matrix Network Example
27
ZR Range - Coaxial Telemetry Receivers
ZR-DC pictured
• Compatible with all pan & tilt heads
• Supports presets
• Available as board (PCB) only or in
weatherproof box (WBX)
• Twisted pair control input (20 mA
current loop) for long distances
• Range of AC voltage outputs plus
24V DC model
• Video gain and lift to compensate
for long cable runs
• Pan, tilt, zoom, focus and auxiliaries
on all models
Model Variations
Model
ZR3M
ZR4M
ZR-DC
AC
AC
DC (variable speed)
Presets
0
8
8
Auxiliaries
2
4
4
Iris control
no
yes
yes
120 x 100 x 30mm
120 x 100 x 45mm
165 x 180 x 45mm
Type
PCB size
28
Video signal
Video Input
Video Output
Video Gain and Lift
Composite video, 1V p-p, 75Ω via BNC connector
Composite video 1v p-p 75Ω via BNC connector
Max gain +6dB, max lift +12dB at 5Mhz
Control telemetry
Via Video Coax
Via Twisted Pair
Baxall telemetry
20mA current loop
Outputs
Lens drive output
6V or 12V selectable @ 100mA / drive with 1 second slow start
Support for 3 or 4 wire
Relays
4 normally open relay outputs
Common supply rated at 240V @ 1A / output
Inputs
8 Normally open inputs or 4 Normally open and 4 normally closed
Outputs
1 Normally open alarm contact (1 second closure on each alarm)
Alarms
Power supply
Input
Output
120~220v AC, 50/60Hz
24V DC, 65W, 3A maximum
Environmental
Operating Temperature
Operating Humidity
-10°C to +50°C
10% to 80% relative humidity, non condensing
29
ZMX Range - Multiplexers
• Direct VCR control from multiplexer
or keyboard via RS232
• Activity with intruder detection
• Bax-net compatible - for systems
integration to multiplexers, matrices
and remote keyboards
• Covert camera setting prevents
viewing by operators in live mode
• Decodes tapes from other major
manufacturers (eg DM and Robot)
• AutoList™ enables automatic
sequence list set up with variable
dwell times for up to 2 monitors
• Compatible with Baxall digital VCR
• VEXT automatic VCR record speed
synchronisation
• S-VHS main and VCR connections
provided
• On-screen menus with time and
date
Model Variations
Model
Type
Video Inputs
Composite VCR
S-VHS VCR
Alarm Inputs
Composite Monitor
S-VHS Monitor
Recording Fields/sec
F
ZMXBD10
ZMXCD10
ZMXBD16
Mono duplex
Colour duplex Mono duplex
Colour duplex
10
10
16
16
2 x BNC
2 x S-VHS
2 x BNC
2 x S-VHS
2 x BNC
2 x S-VHS
2 x BNC
2 x S-VHS
10
10
16
16
2 x BNC
1 x S-VHS
2 x BNC
1 x S-VHS
2 x BNC
1 x S-VHS
2 x BNC
1 x S-VHS
25
25
25
25
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
ALT
16 way unit shown
30
ZMXCD16
Video
Video Format
Video Inputs
Video Outputs
Multi Screen Live Display
PAL (CCIR), composite 1V p-p, 75Ω terminated
Dual loop through BNC’s, termination via DIP switches. Auto & manual
signal type detection
BNC connectors, plus S-VHS connectors
Full, Quad, 7, 9, 10, 13, 16 way & Picture in Picture
Display Resolution
720 x 576
Recorded Resolution
720 x 288
Interface
Sequence Modes
VCR Clock Pulse (VEXT)
Remote Control
Full & multiscreen sequence option for Live and Playback displays
Default all cameras with menu adjustable dwell
AutoList feature: Allows customisation of a full screen sequence list &
dwell time via camera keys for each monitor & display, allows up to 2
independent AutoList
TTL field sync pulse. Duration 2~5 ms,
High level +4.5V to +5.5V, Low level 0V
Baxnet RS485: via 2 x RJ45 connectors
RS232: via 1 x 9 way D Type (Transmits up to 10 bytes on a RS232 string)
Remote Keyboards
ZKB1, ZKX2/K, ZKX2/J, ZKX3/J
Inputs and Outputs
10 or 16 alarm inputs with audible buzzer & visible LED, programmable
Interface for N/O or N/C contacts. Video loss detection (VDL) with audible
buzzer & visible LED. Linkable to 2 relay outputs. I external alarm clear
2 alarm output relays. 30V AC/DC & 500mA max. N/O or N/C programmable.
Alarms
Motion Detection
Intrusion Detection
Activity: 16 x 16 definable mask grid. 10 levels of sensitivity
Definable record speed upgrade. Linkable to 2 relay outputs
Links motion detection to an alarm response allowing for camera full screen
or quad switching on detection
Power Supply
Input voltage
Power Consumption
12V DC via 2.1mm jack connector. 110/220 V AC input PSU supplied
38W max
Mechanical
Dimensions
Weight
Enclosure/colour
1 U high 19" rack mount. 445 x 45 x 360 (W x H x D mm)
6.5 kg (unit) 8 kg (shipping)
Rugged Metal Chassis in Slate Grey (rack ears supplied)
Environmental
Operating Temperature
Max.Operating Humidity
0°C to +40°C (32°F to 104°F)
90% relative humidity, non condensing
31
ZMX Plus - Multiplexers with Telemetry
• Built-in coaxial telemetry
• AutoList™ enables automatic
sequence list set up with variable
dwell times for up to 2 monitors
• Parallel Video Processing (PVP) for
50 frames/second
• Bax-net compatible - for systems
integration to multiplexers, matrices
and remote keyboards
• Range includes built-in matrix
models providing 1 main and 4 spots
• Direct VCR control from multiplexer
or keyboard via RS232
• Decodes tapes from other major
manufacturers (eg DM and Robot)
• Activity with intruder detection
• Compatible with Baxall digital VCR
• Covert camera setting to prevent
operators viewing the images in live
mode
• On-screen menus with time and date
• S-VHS main monitor and VCR
connections provided
• VEXT automatic VCR record speed
synchronisation
Model Variations
Model
ZMX+BD16 ZMX+CT10
ZMX+CD16
Type
Mono Duplex Colour Triplex
Colour Duplex Mono Triplex
Colour Triplex
16
10
16
16
16
2 x BNC
2 x S-VHS
2 x BNC
2 x S-VHS
2 x BNC
2 x S-VHS
2 x BNC
2 x S-VHS
2 x BNC
2 x S-VHS
Expandable to 32 Inputs
No
No
No
Yes
Yes
(ZMX+BT32M4) (ZMX+CT32M4)
Alarm Inputs
16
10
16
16(32)
16(32)
2 x BNC
1 x S-VHS
2 x BNC
1 x S-VHS
2 x BNC
1 x S-VHS
2(5) x BNC
1 x S-VHS
2(5) x BNC
1 x S-VHS
50
50
50
50
50
Video Inputs
Composite VCR
S-VHS VCR
Composite Monitor
S-VHS Monitor
Recording Fields/sec
16 channel unit pictured
ZMX+BT16M4 ZMX+CT16M4
Loop through camera inputs
RS485
VCR
Expansion unit connection
Monitors A, B
Alarms
RS232
32
Monitors C, D, E
Power
Video
Video Format
Video Inputs
Video Outputs
Multi Screen Live Display
Resolution
PAL (CCIR), composite 1V p-p, 75Ω terminated
Loop through BNC’s auto terminating, auto & manual signal type detection
BNC connectors, plus S-VHS connectors
Full, Quad, 7, 9, 10, 13 and 16 way and Picture in Picture. Plus 25 way on 32
input models
Display: 720 x 576, Recorded: 720 x 288
Interface
Sequence Modes
VCR Clock Pulse (VEXT)
Remote Control
Remote Keyboards
Full & multiscreen sequence option for Live and Playback displays
Default all cameras with menu adjustable dwell
AutoList feature: Allows customisation of a full screen sequence list &
dwell time via camera keys for each monitor & display, allows up to 2
independent AutoList
TTL field sync pulse. Duration 2~5 ms,
High level +4.5V to +5.5V, Low level 0V
Baxnet RS485: via 2 x RJ45 connectors
RS232: via 1 x 9 way D Type (Transmits up to 10 bytes on a RS232 string)
ZKB1, ZKX2/K, ZKX2/J, ZKX3/J
Alarms
Inputs and Outputs
Motion Detection
Intrusion detection
10, 16 or 32 alarm inputs with audible buzzer & visible LED, programmable
Interface for N/O or N/C contacts. Video loss detection(VDL) with audible
buzzer & visible LED. Linkable to 2 relay outputs. I external alarm clear
2 alarm output relays. 30V AC/DC & 500mA max. N/O or N/C programmable.
Activity: 16 x 16 definable mask grid. 10 levels of sensitivity
Definable record speed upgrade. Linkable to 2 relay outputs
Links motion detection to an alarm response allowing for camera full screen
or quad switching on detection
Telemetry control
Baxall Coax telemetry on all monitors and first 16 channels for:
ZR3M, ZR4M, ZR-DC, DAX (Dome converters)
Built-in Preset Park (TL1) & Random Preset Patrol (TL2) Tour facility
Pseudo variable speed using front panel controls
Twisted pair converter also available ZT-TP1
(Note: Full variable speed telemetry only available with ZKX2/J and ZKX3/J
keyboards and on the first 16 channels of a 32 way unit)
Power Supply
Input voltage
Power Consumption
12V DC via 2.1mm XLR connector. 110/220 V AC input PSU supplied
38W max
Mechanical
Dimensions
Weight
Enclosure/colour
1 U high 19" rack mount. 445 x 90 x 360mm (W x H x D), expander main unit
6.5 kg
Rugged Metal Chassis in Slate Grey (rack ears supplied)
Environmental
Operating Temperature
Max.Operating Humidity
0°C to +40°C
90% relative humidity, non condensing
33
DTL Series - Digital Video Recorders
• VCR functionality with instant video
retrieval
• Programmed with common timelapse speeds
• VCR style control panel
• 10/100 BaseT Ethernet via RJ45
• No tapes to manage or tape heads
to clean or replace
• RS-232 remote control and upload
• On-screen menus for image search
• Event timers
• Records and plays multiplexed video
• Built in CD-Writer or removable
hard disk drive
• Audio
• Alarm-activated recording
Overview
Baxall’s DTL series of single channel digital video recorders, operate in a similar way to the traditional VCR. The
familiar buttons on the control panel make it simple in operation and extremely user friendly. The DTL series delivers
crisp images, whether in play, reverse, fast forward, fast reverse or pause mode where sharp and stable images
can also be viewed frame by frame. Through a simple on-screen search menu, precise access to recorded events
eliminates time spent rewinding and fast forwarding. The “e" in the product name denotes that the unit can be
assigned its own IP address and by using the supplied WaveReader Software, live or recorded images can be
viewed on a LAN or WAN.
The DTL96Ce, offers the highest specification available within the series. Boasting features such as ethernet, audio
and built in CD-Writer, the DTL96Ce can record and play back video in the same way as a time lapse VCR and can
record at speeds of up to 50 pictures per second (PPS), or as low as 0.1PPS. This makes it ideal for event recording,
or time-lapse photography.
Using the built in CD-Writer, video clips of at least 20 minutes can be copied from
the hard drive and opened again at a later date on a PC running WaveReader
software. The images can then be printed, enhanced or forwarded onto other
recipients. Recordings can be archived automatically for any number of days,
weeks or even longer, with an optional MDAe (Multi-Disk Array) available
separately from Baxall, or a DAT or AIT storage system.
Other features include unlimited video viewing without image degradation, data
transfer and standard VCR I/O facilities such as event timers, alarm recording,
audio and S-VHS input and output. To assist in compliance with the CCTV
Code of Practice within the Data Protection Act 1998, the unit boasts an Auto
Delete Mode that can be turned on from 1 day to 99 days.
34
Models
DTL-96Ce-80, DTL-96Ce-160, DTL96Ce-320
DTL-900-40, DTL900-120, DTL900-240
DTL-90R, DTL-96Re (80GB HDD as standard)
REM-HDD80 spare caddy with 80GB HDD for use with DTL-90R and DTL-96Re
DTL-96Ne*, DTL90N*.
Video
Video Colours
Greyscale
Horizontal Resolution
Vertical Resolution
Signal Format
YUV 4:2:2, 16.8 million colours
256 levels
720 pixels
576 lines PAL/CCIR
PAL/CCIR
Storage
Hard Drive Capacity
Recording Speeds
External Archive
External HDD
HDD size up to 320GB available
50, 25, 17, 10, 5, 3, 2, 1, 0.5, 0.2, 0.1 pictures per second, and event
DAT or AIT or CD-Recorder
One SCSI, DB 50-S-SCSI (reversed)
Contact Baxall for recommended models
Removable HDD 80Gb or 160Gb
Connections
I/O Port
RS-232
Composite Video
S-VHS
Audio
Network
10 way screw terminal connector: Alarm input and output, Record Start in,
Alarm Record reset, VEXT Pulse out, Error out, Ground, Video Loss out,
Disk End (5 minutes) out
9 way D type, male, 3-wire, N-8-1, baud rate selectable in menus
BNC connectors, one each input and output
DIN connectors one each input and output
Phono connector (signal type - line)
RJ45 connector for 10/100 BaseT Ethernet
Remote Control
Via RS-232
Allows control from PC or multiplexer, software upgrades & remote control
of front panel buttons
Power Supply
Input Voltage
Power
110~230V AC
<50W nominal (Maximum with dual hard drives and internal CD-Writer)
Mechanical
Dimensions
Weight
438 x 385 x 88 mm, (17.3 x 15.2 x 3.5 in). 2U rack height
7.5kg (16.53 lbs) Maximum weight with dual hard drives and internal CD-Writer
Environmental
Operating Temperature
Relative Humidity
0 to 40º C
90% max. relative humidity, non-condensing
* Reserved products not for general use. Contact Baxall Export Sales for more details
35
MDAe - Hard Drive Storage/Archive
• Holds up to 8 internal disk drives
• Compatible with DTL900 and
DTL96Ce series
• 960GB of storage
• 3 Months storage in equivalent 24Hr
mode, Medium Video Quality
• Background archiving
• Selective archiving
• Purchase unit with or without hard
drives installed
• “Continuous" or “Disk full". No
overwrites modes
• WaveReader software
• SCSI 2 interface cable supplied
• 10/100 BaseT Ethernet via RJ45
Overview
An addition to Baxall’s hard disk recording products is the Multi Disk Array (MDAe), a digital video storage system.
Designed with the CCTV security industry in mind, with the ability to support up to 8 hard drives (storage capacity
of 960GB), the MDAe is truly the most effective and efficient method of maintaining hard drive recordings when
used in conjunction with the DTL96Ce hard disk recorder.
LCD and LED indicator lights show how many hard drives are installed and operating, and the total disk storage
capacity. Rack-mount handles are provided with the unit for simple installation.
Compatible with WaveReader software (version 2.7), retrieval and viewing of video is simple for users. WaveReader
software enables the user to search and view the archived images directly from the MDAe. Images can also be
captured, printed and exported as a file using Wavestudio software.
960GB capacity
Pictures per second
50
25
17
10
5
3
2
1
0.5
Equivalent tape capacity
3hr
6hr
9hr
12hr
24hr
48hr
72hr
120hr
240hr
High
6.7
14
19.8
33.7
67.3
112
168
337
673
Medium
9.3
19
27.2
46.3
93
154
231
463
926
Standard
14.8
30
43.6
74.1
148
247
370
741
1481
Video
quality
(Recording
time in hrs)
36
Electrical
Input voltage
Power
110 – 120 VAC (60 Hz) / 200 – 240 VAC (50 Hz)
60Hz at 110 VAC, 50Hz at 220 VAC
Network
One RJ45 connection
10/ 100 Mbit Ethernet
Mechanical
Weight
Construction
Finish
28 lb (Caution: weight may vary depending on number of hard drives
installed)
Steel, rack-mountable, 3U
Dark grey
Storage
Hard drive(s)
Up to 8 x Maxtor IDE HDD, sizes up to 160GB/ drive
Connections
SCSI Ports 1 and 2: 50-pin, high-density, SCSI 2
RS232 port: DB-9 connector, male, null modem cable required
Relay connection
Front Panel Indicators
Hard Drive Status
Light On: Drive present and operating
Light Flashing: Drive present, error detected
Light Off: No drive present, or drive damaged
Hard Drive Activity
LCD
Light on when the drive is being accessed (read or written to)
When power up is complete, the LCD displays the total disk storage
capacity of the unit.
Dimensions
483 x 130.81 x 350.52mm (L x W x H)
���
��
� � � �
�������������������
�������������
���������
������
���������
������
��������
������
����
������
������
���
������
���
��
37
������
�����
DAX - Dome Interfaces
• Easy to install
• Pan flip (Auto flip) function
supported on some domes
• Auto tuning
• Supports proportional variable speed
• Compatible with leading dome
brands
• One transmitter controls AC or DC
receivers and Dax converters
• Access to 16 presets supported
depending on dome
• Compatible with Baxall coaxial
ZTX6 and ZMX Plus telemetry
transmitters
• Patrol function available, DAX
driven
Overview
The DAX range of dome converters is designed to control leading brands of variable speed
domes via ZTX6 and ZMX Plus coaxial telemetry transmitters. Control is enabled by converting
Baxall co-axial telemetry signalling into twisted pair protocols for selected proprietary domes.
Installation of the domes is made simple as all signals are transmitted along the coaxial cable
to the DAX. Control can be maintained at distances up to 500 metres using correctly specified
coax cable. Compatible with ZTX6 and ZMX Plus using joystick keyboard ZKX2/J or ZKX3/J for
proportional variable speed.
��������������
����
�����������
�������
������
��������
�����
�����������
38
Video
Input
Composite video 1V p-p 75 ohm terminated, BNC connector
Output
Composite video 1V p-p 75 ohm terminated, BNC connector
Interface
Data Comms
RS485, RS232
Power Supply
Input Voltage
Power Consumption
12V DC (240V AC adapter supplied) or 24V AC.
<50mA
Physical
Dimensions (WxHxD)
Weight
Enclosure / Colour
115 x 37 x 107mm
242g
Anodise black aluminium
Environmental
Operating Temperature
Operating Humidity
Supported Domes
0~40°C operating (-20°~80°C storage)
20% to 80% relative humidity max, non condensing
Models
Baxall Code
JVC
TK-C675BE, TK-C675E
DAX/JVC
Star
MD-100, MD800, MD-1200S, MD1200H, MD-2000
DAX/DMA
VCC-9200P
DAX/DMA
SMD08P, SMD-0811, SMD-12, SMD-1211, SMD-20
DAX/DMA
D250 mpT, D400 mpT, D500mpT
DAX/MM
Type 2050
DAX/DEN
Sanyo
Computar
Mark Mercer
Dennard
Vicon
Phillips/Burle
(RS232 I/F only)
V7UVS-CC, V7UVS-MC, V15UVS, Surveyor 99, Surveyor 2000 DAX/VIC
TC750-4-2, TC750-6-2, TC750-9-2, TC750X-2-2, TC750X-6-2,
TC750X-9-2, TC770-4-2, TC770-6-2, TC770-9-2, TC770X-4-2,
TC770X-6-2, TC770X-9-2
DAX/PHIL
WV-CSR300, WV-CSR400, WV-CSR600, W-CSR850
DAX/PAN
Will control any Pelco dome running Pelco “D" protocol
DAX/PEL
Kenko
DAP16-H3
DAX/KEN
Ultrak
Will control all KD6 domes. KDZ domes controlled after initial
programming via JPD keyboard
DAX/UL
Optima, Ultra 3, 4 and 6
DAX/SEN
Orbiter lite, Orbiter and Jupiter
DAX/VCL
Panasonic
Pelco
Sensormatic
VCL
39
Pyramid - Echelon Based Matrix System
• Simple twisted pair data network
cabling
• Interfaces to other system networks
• Flexible topology
• Multi level security
• Easily expanded through modular
design
• Programmable via on-screen menus
• Smart-card protected keyboard
• Extensive camera control features
Overview
The Pyramid System is a highly flexible video management system. It simplifies installation,
maintenance and expansion of CCTV networks and offers exceptional functionality for systems
with up to 144 cameras and up to 32 monitors. Multiplexers, VCRs and matrices can all be
controlled from one keyboard, or a number of distributed keyboards.
Pyramid is suitable for large systems such as town centres, football grounds, sports stadiums,
carparks etc.
Multiple points of control can be distributed around a Pyramid system. These can be keyboards
or PC-based interfaces. Each user on the system can be allocated a priority level, enabling
effective system management when more than one user wishes to control a vital resource.
Control authority limitations can also be defined.
40
System features
Single twisted pair data network - simplifies cabling and keeps costs down
Flexible topology - either daisy chain, star or a mixture of both
Smart card, user priority, resource allocation and access level protection
Programmable via user friendly on-screen menu
Multi network media options can be installed with any combination of RS485, RS422, FTT10 or
direct fibre
Unique flexible network expansion system using Star drivers and network expanders
Interfaces to a wide range of other system networks
Camera control features eg variable speed control, random and patrol tours, privacy zones, up to
128 camera presets per receiver
Easily expanded through modular design
Lap top installation tool enables simple system configuration
Network connection by twisted pair FTT10, RS485, fibre optics or microwave
IP connectivity - universal and flexible support for wide range of dome products
Matrix features
48 camera inputs, 16 monitor outputs as standard, with full cross-point switching
Echelon based technology, provides easy interfacing to other industrial equipment
On-screen text on all monitors as standard
8 x RS232 ports as standard for control of VCRs and multiplexers
Printer logging port for alarms and user access
Expandable to 144 inputs and 32 outputs using slave matrices
Multiple matrix capability for larger systems
Installation tool
System is programmable from a laptop or PC and enables remote camera addressing, camera
titling and configuration of systems facilities, including alarms
Alarm handling
Up to 1024 networked alarm inputs may be individually switched
Preset positions and views on alarm
On-screen messages may be generated
Transmit audio signal to operator on alarm
Active Alarm List on separate monitor
Keyboard functions
Camera and monitor selection
Control of fixed and variable speed PTZ cameras
Twist joystick for rapid, precision zoom control
Camera focus/iris, wash-wipe/lighting controls
System configuration and addressing
VCR and multiplexer control
Backlit LCD display for operator information
Compatibility
7000 systems using PY-7000
Baxall ZR mini receivers using PY-COX coaxial telemetry converter
Most market leading VCRs and multiplexers including Baxall ZMX, ZMX+, DTL and Vista Columbus
Universal dome interface compatible with Ultrak, Vicon, VCL, Panasonic, JVC, Pelco, Dennard
and Mark Mercer domes - other domes will be added
41
- Digital Network Video
• Constant quality video that remains
fit for purpose
• Possible to route video over any
private or public network
• Highly flexible and scaleable
• Bi-directional audio for point-to-point
connections
• Low bandwidth digital CCTV over
any existing or new Ethernet network
• Alarms inputs and device switching
outputs
• Can integrate legacy analogue
solutions
• Serial data communication for other
third party applications
• Low cost implementation and
maintenance through single
convergent network
• Various software options from simple
web-servers to comprehensive multiuser controllers
Overview
The Destiny-IP video solution enables video images to be transmitted and viewed over networks. It consists of
several network compatible devices that address, transmit and control real-time video, data and audio streams over
IP networks.
Providing a simple to assemble but sophisticated CCTV solution, Destiny-IP can operate in a standalone capacity
or as an extension to an existing analogue system. Remote monitoring can be cost effectively implemented via
the network and the scope of the traditional CCTV network can be extended due to its ability to share the viewing
and control of images from different points on the network.
The Destiny range of products has been designed to support both TCP/IP (Transmission Control Protocol) and
UDP/IP (User Datagram Protocol). The products can be directly connected to an Ethernet network which can be
incorporated into a dedicated network or as part of a LAN, MAN or WAN configuration.
42
CCTV over Ethernet and internet networks opens up a realm of possibilities for security installers and end users.
The installer can branch out into new areas combining security with a number of different functions namely
access control, information technology or finance applications. This makes it an excellent sales tool as the cost
of the system can be spread between clients’ departments.
Also for the end user real cost savings can be made as existing networks can be used for the application.
Additionally the Destiny IP equipment can be applied for non-security applications such as access control,
information technology or market research purposes to learn about consumer behaviour for instance.
Destiny IP - the possibilities are endless
Caltrans
Baxall recently supplied Caltrans with the Destiny IP range of software products for
use on the 15,000 mile California State Highway System.
Baxall provided 430 CCTV cameras and a number of IP Codecs for the project. The
IP Codecs convert camera signals into compressed data, allowing full-motion, realtime, digital quality video, together with audio and data, to be transmitted across an
IP network. The Destiny IP Codec solution was used due to its flexibility as it enables
multiple Caltrans’ operators to view the same image simultaneously from numerous
locations. Currently, the CCTV images are restricted to Caltrans employees, but with
the introduction of the new Baxall software, plans are already afoot to make some
CCTV images available for view on the internet, allowing the public to check the
highways for traffic themselves.
Vatican
At 44 square kilometres in size, Vatican City is the world’s smallest
independent state, with a tiny population that magnifies during the
working week. To meet the demanding security needs of the Vatican
City, Baxall designed and installed a Destiny IP solution featuring
encoders and decoders. It has provided a highly flexible solution,
enabling local and remote monitoring simultaneously via the City’s
existing network.
Each Destiny IP encoder is linked to a multiplexer so that any camera
on the system can be viewed and controlled, either as a single, full
screen or as a quad display. Control is via a simple GUI that allows
for pan, tilt and zoom functions to be controlled and camera-to-monitor
switching.
Brussels Airport
Baxall worked in conjunction with ENI
of Belgium to produce a CCTV system
for Brussels airport. The CCTV system
was originally installed to cover the
airport solely, however as further growth
is intended, it is engineered to adapt
and support any changes as the airport
develops.
The Destiny IP network video range was
based around IP, sending CCTV images
across an Ethernet network that can be
configured as a LAN, MAN or WAN.
The advantage of using the Destiny
IP system in an airport environment is
its scope and flexibility; it can be used
by the police, fire services, baggage
handling and customs and excise for a
variety of different purposes, at different
places and all at the same time.
When completed, Brussels airport will
have a state of the art CCTV system
that offers 25 images per second
streaming video from 700 cameras,
whilst retaining existing cameras with
the use of IP encoders. There will be three
control rooms with the familiar analogue
video walls and the new Graphical User
Interfaces.
����������������
�������
����������
���
������������������������
���������
������������
���������
����������
���
����������������
����������
������������������������
������
��������
������������
����������
���������
���
����
��������
�������
������
�����
�����
����������
������������������������
Typical example of an airport video network configuration
43
������������
- The possibilities are endless
IP Camera
• A single IP camera accommodating
up to 4 analogue video signals
• Transmits and receives video,
audio, serial and alarm signals over
10/100 Base T Ethernet networks
• Supports colour or black and
white video images on PC’s and
traditional analogue monitors
• High quality CIF resolution images
at 25 frames per second
• Low network bandwidth utilization
Analogue
camera
IP camera
• Supports RS232/422/485 serial data
for PTZ and other local devices
IP encoder
IP Receiver
• Provides full pan, tilt, zoom and lens
functionality
• Transmits transparent data via
RS422
Analogue
camera
plus PTZ
• Contains four relay outputs as
standard for wash, wipe, lamps and
auxiliary.
• Supports up to 128 presets with
various options for patrol or autopan modes
IP
• No additional interface for Ethernet
network required
• RS422 serial data connection
Network Video Recorder
IP encoder
• Centralised recording tool for a
customized solution
• Available as 16/32/100 stream
device enabling the same number
of streams to be recorded at any
one time
IP receiver
• Quick and easy development tool it
is a cost effective alternative to high
cost DVR technology
• Compatible with the whole Destiny
IP range ensuring comprehensive
integration
• Enables configuration of continuous
recordings or alarm event recording
Network Video Recorder
44
PC contr
IP Webserver
• Enables distributed viewing of images
on any PC
• Provides serial data for PTZ domes
and other serial devices
• Low cost option by viewing small
groups of cameras at 4-5 frames per
second
IP webcamera
Analogue cameras
and domes
• Images displayed in a choice of
resolution for non-critical or extremely
sensitive circumstances
IP Codec
• Can be configured as an encoder or
decoder
• Supports viewing of images on
PC’s and traditional analogue CCTV
monitors
IP webserver
• Provides high quality CIF resolution
images at 25 frames per second
• Low network bandwidth utilization
• Control new or legacy domes and PTZ
devices over any sized network
• Supports telephony quality audio
for help points of door access
applications
Network
roller/viewer
• Enables up to six binary inputs and
outputs for alarm trigger and device
switching
IP decoder
IP keyboard
IP Keyboard
• Similar functions to a CCTV keyboard
• No additional interface to Ethernet
network
• Durable, high quality three-axis
joystick
• Large back lit LCD display for clear
messaging
• Shortcut keys to all functions
• Multi-level protection for unauthorized
access
• Popular for operation at remote sites
PC controller
• Provides scalable configuration,
viewing and event management
• Operate on any Windows 98, 2000,
M.E and NT platform.
Analogue monitor
45
• Extensive list of drivers for PTZ,
Domes and other third party devices
• Enables configuration of all devices,
users, systems and alarms operating
an easy to use graphical interface.
Your local Baxall agent is:
47
Baxall Ltd
Unit 1 Castle Hill, Horsfield Way
Bredbury Park Industrial Estate
Stockport, Cheshire, SK6 2SU, UK
Tel: +44 (0)161 406 6611
Fax: +44 (0)161 406 8988
sales@baxall.com support@baxall.com
www.baxall.com
www.baxallnetworks.com