3.0 AS-Interface Handheld VBP-HH1-V3.0 Dimensions

AS-Interface Handheld

Dimensions

80

42.5

34

30

VBP-HH1-V3.0

Spec.

3.0

Model number

VBP-HH1-V3.0

AS-Interface Handheld

Features

• Addressing and programming AS-Interface slaves

• Displaying the assigned slave addresses and the status of the inputs

• Setting outputs at the AS-Interface slave

• Also supports profiles S-7.7.A.7

(Spec 3.0), S-0.B and S-7.B (AS Interface Safety at Work)

• The slave connection is short-circuit and overload proof

• Battery charger included with delivery

Electrical connection

4

1

3

2

5

2 Digital input for optical addressing adapters

4 Digital output for optical addressing adapters

5 Voltage supply for optical addressing adapters

Indicating / Operating means

Display

„“ button ==> Increments slave address

„MODE“ button ==>

Einstellen des Betriebsmodus

„¯“ button ==> Dencrements slave address

„PRG“ button ==>

Programs new slave address

„ADR“ button ==>

Reads slave address/switches on device

ATTENTION!

Charge accumulator prior to initial commissioning.

Technical data

General specifications

AS-Interface specification

Operating mode

Indicators/operating means

Keyboard

Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.

Pepperl+Fuchs Group www.pepperl-fuchs.com

USA: +1 330 486 0001 [email protected]

Germany: +49 621 776 4411 [email protected]

V3.0

Plug-in charging unit, 230 V AC, included in the delivery package membrane keys, 5 keys

Singapore: +65 6779 9091 [email protected]

1

AS-Interface Handheld VBP-HH1-V3.0

Electrical specifications

Operating duration

Power supply

8 h or ≥ 250 read/write procedures for fully charged battery battery mode, please use only battery charger included with delivery to charge (charging time about 14 h)

Interface

Interface type

Open loop voltage

Load current

AS-Interface, short-circuit proof and overload-proof, or optical

28 V

100 mA at 25 V

Ambient conditions

Ambient temperature

Storage temperature

0 ... 40 °C (32 ... 104 °F)

-20 ... 40 °C (-4 ... 104 °F)

Mechanical specifications

Protection degree IP20

Material

Housing plastic

Compliance with standards and directives

Directive conformity

Low Voltage Directive 2006/95/EC

EMC Directive 2004/108/EC

Standard conformity

Noise immunity

Emitted interference

Protection degree

Electrical safety

Plug-in charging unit EN 60950-1:2006+A14:2009

Handheld: EN 61326-1:2006

Plug-in charging unit EN 61000-3-2:2006 , EN 61000-3-

3:1995+A1:2001+A2:2005 , EN 55022:1998+A1:2000+A2:2006

, EN 55024:1998+A1:2001+A2:2003

Handheld: EN 61326-1:2006

Plug-in charging unit EN 61000-3-2:2006 , EN 61000-3-

3:1995+A1:2001+A2:2005

Handheld: EN 61326-1:2006

Plug-in charging unit EN 55022:1998+A1:2000+A2:2006 ,

EN 55024:1998+A1:2001+A2:2003

EN 60529:2000

Plug-in charging unit EN 60950-1:2006+A14:2009

Function

The AS-Interface Handheld VBP-HH1-V3.0 is an addressing device according to the AS-

Interface specification 3.0.

This addressing device can be used to program AS-Interface slaves and to test part of their functions.

In addition, new functions have been incorporated:

• Permanent data exchange with AS-Interface slaves

• Support of the data exchange with 4E4A slaves in ext. addressing mode

• Indication of the safety code for AS-Interface Safety-at-Work slaves

The AS-Interface connection adapter on the top of the addressing device is used for connecting AS-Interface slaves (sensors, actuators and modules) to the addressing device.

The following devices and designs can be connected to the addressing device by directly plugging it onto the AS-Interface connection adapter:

Devices with M12 connector, VariKont M-system, VariKont system, FP design, AS-Interface modules of the types G1 and G4.

For device designs with integrated addressing socket, please use the optional adapter cable.

Accessories

VAZ-PK-1,5M-V1-G

Adapter cable module/hand-held programming device

V1S-TEE-V1/V1S

T-Distributor, M12 connector to M12 socket/connector

V1-W-2M-PVC

Female cordset, M12, 4-pin, PVC cable

VAZ-PK-FK-0,2M-V1-W

Adapter cable G10 module/hand-held programming device

VAZ-9VDC-CHRG-115VAC

Power Supply

VAZ-9VDC-CHRG-230VAC

Power Supply

2 Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.

Pepperl+Fuchs Group www.pepperl-fuchs.com

USA: +1 330 486 0001 [email protected]

Germany: +49 621 776 4411 [email protected]

Singapore: +65 6779 9091 [email protected]