Audio international DVD-9101-101-x Operating instructions

DJ SYSTEM
XDJ-R1
http://pioneerdj.com/support/
The Pioneer DJ support site shown above offers FAQs, information on software and various other types of
information and services to allow you to use your product in greater comfort.
http://rekordbox.com/
For various types of information and services regarding rekordbox™, see the Pioneer website above.
Operating Instructions
Contents
How to read this manual
! In this manual, names of channels and buttons indicated on the
product, names of menus in the software, etc., are indicated within
square brackets ([ ]). (e.g. [CH 1], [CUE] button, [Start] menu)
! The Operating Instructions of rekordbox can be viewed from the
rekordbox [Help] menu after installing rekordbox.
Before start
Features........................................................................................................ 3
Before you start
Mounting the smartphone stand............................................................... 4
Supported sources...................................................................................... 4
Usable media............................................................................................... 4
Playable music file formats........................................................................ 5
Functions usable in combination with a computer................................. 6
Connections
Connecting the input/output terminals................................................... 10
Connecting by wireless LAN..................................................................... 11
Part names and functions
Power & wireless section.......................................................................... 14
USB device section.................................................................................... 14
Player section............................................................................................. 14
Browse section.......................................................................................... 17
Mixer section.............................................................................................. 18
Effect section.............................................................................................. 19
Operation
Turning the power on................................................................................ 21
To set to the standby mode....................................................................... 21
Loading and ejecting discs....................................................................... 21
Connecting and disconnecting USB devices......................................... 22
Playback..................................................................................................... 22
Using remotebox....................................................................................... 22
Outputting sound...................................................................................... 22
Mixing using the faders............................................................................. 23
Using the QUANTIZE function................................................................. 23
Using the SYNC function.......................................................................... 23
Changing the settings
About the auto standby function.............................................................. 24
Setting preferences................................................................................... 24
List of WLAN INFORMATION items......................................................... 24
List of WLAN SETTING items.................................................................... 25
Using the DJ software
About the driver software (Windows)...................................................... 26
Using the DJ software............................................................................... 27
Using VIRTUAL DJ LE................................................................................ 27
List of MIDI Messages............................................................................... 28
Additional information
Troubleshooting......................................................................................... 35
Error messages.......................................................................................... 37
Block Diagram........................................................................................... 37
List of icons displayed on the main unit display section........................ 38
Cautions on use......................................................................................... 38
Handling discs........................................................................................... 38
About trademarks and registered trademarks....................................... 38
2
En
Before start
Before start
Features
AUTO BEAT LOOP
This unit is an integrated DJ player/DJ mixer carrying over the high operability of the Pioneer DJ products used in clubs throughout the world.
With it, full-fledged DJ performances can be held easily using tracks on
USB devices, CDs and computers.
Loops can be set automatically without breaking the beat by pressing the [AUTO BEAT LOOP] control. The loop’s number of beats can
be changed by turning the [AUTO BEAT LOOP] control clockwise or
counterclockwise.
MULTI MEDIA, MULTI FORMAT
BEAT FX
In addition to music CDs, music files stored on flash memory or other
USB devices (MP3, AAC, WAV and AIFF) and music files stored on CD-R/
RW discs (MP3, WAV and AIFF) can also be played. The unit can also be
used as a DJ software controller and audio interface.
Beat effects are provided for each of the decks. Beat effects can be
applied individually to the tracks currently playing on the respective
deck.
remotebox
This unit is equipped with a wireless LAN function.
remotebox, a mobile device application available for download free of
charge, can be used to control this unit remotely from a mobile device.
Highly varied DJ performances can be achieved through operations on
remotebox.
rekordbox
The included rekordbox (Mac/Windows) music management software
can be used for the management (analysis, settings, creation, history
storage) of music files on computers. Using music files managed with
rekordbox in combination with this unit makes it possible to achieve
outstanding DJ performances.
! In this manual, the Mac/Windows edition of rekordbox is referred to
as “rekordbox”.
SOUND COLOR FX
This unit is equipped with four effect buttons allowing the sound to be
changed in various ways. The mood of the sound can be modified easily,
simply by pressing a button and turning the control.
HOT CUE
This unit is equipped with a hot cue function for starting playback instantaneously from cue points that have been set in advance simply by pressing a button. Three hot cues can be set per deck.
4-BEAT SAMPLER
Sampled sound sources registered on this unit can be played simply
by pressing a button. Sampled sound sources can be registered from
tracks on USB devices and CDs.
USB EXPORT
3-BAND ISOLATOR
rekordbox music files and management data can be exchanged using a
USB device.
This unit is equipped with a 3-band equalizer allowing the volume of
the high, medium and low frequency ranges to be adjusted separately.
Not only can the tone be adjusted to your tastes, the sound for a certain
range can be turned completely off by turning the control all the way
counterclockwise (isolator function).
SOUND CARD
This unit is equipped with a MIDI interface allowing other brands of
DJ software to be controlled. It also has a built-in sound card, allowing
simple connections to other devices.
BEAT SYNC
This function can be used to automatically synchronize the tempo (BPM)
and beat positions on the left and right decks based on the tracks’ GRID
information as analyzed with rekordbox. Genuine beat mixing is possible
easily, without moving the [TEMPO] sliders.
VIRTUAL DJ LE
A license key for “VIRTUAL DJ Limited Edition”, a DJ software program
with a complete set of basic functions for DJ performances, is included.
This software can be downloaded from the Atomix productions website.
Not only is this unit equipped with a wide variety of functions, including
looping, effects, sampling, 4-channel mixing and video, it can also display Pioneer original design skins matching its operation panel.
QUANTIZE
This unit is equipped with a QUANTIZE function letting you set points
on beat for tracks analyzed with rekordbox, even if buttons are pressed
roughly. When setting auto loop beats and beat effects, the points are
automatically set to the beat nearest the position at which the button
was pressed.
With this unit, accurate, on-beat performances are possible without
breaking the rhythm of the currently playing sound not only when auto
beat loops and beat effects are set but also when using hot cues and
other functions during playback.
En
3
Before you start
Mounting the smartphone stand
Usable media
1 Insert the hooks in the smartphone stand into the
holes in the main unit’s rear panel and slide the stand
downward until it stops.
About discs
! Do not mount any stand other than the included one.
2 Fasten the stand using the included screws.
This unit can play the discs shown below.
Type
Mark 1
Compatible formats
Supported file
systems
!
—
! Do not use any screws other than the included ones.
CD
Music CD (CD-DA)
CD-R
! Music CD (CD-DA)
!CD-ROM
ISO9660 level 1, ISO9660
level 2, Romeo and Joliet
!
—
CD-RW
CD-TEXT 2
Cautions on using the smartphone stand
! This stand is exclusively for smartphones. Do not set tablets or other
larger devices on it.
! Do not apply excessive force to the stand. Doing so may damage this
unit.
! Please note that Pioneer will accept no responsibility whatsoever for
damage to or malfunction of the device, injury, etc., due to the device
falling, etc.
WARNING
Keep the included screws out of the reach of children and infants. If
accidentally swallowed, contact a doctor immediately.
Music CD (CD-DA)
1 Discs on which the marks on this table are indicated on the disc label, package
or jacket can be played.
2 Titles, album names and artist names recorded in the CD-Text data are displayed. When multiple text data are recorded on the disc, the information for the
first text data is displayed.
Discs that cannot be played
!DTS-CD
! Photo CDs
! Video CDs
! CD Graphics (CD-G) discs
! Unfinalized CDs
!DVD
About CD-R/-RW discs
Supported sources
This unit supports the sources listed below.
! Discs (page 4)
! USB devices (page 5)
About the included CD-ROM
This unit can be used in combination with a computer when the software
is installed onto the computer from the included CD-ROM.
The included CD-ROM contains the following two software programs.
! rekordbox music management software
! Driver software
Music files (MP3/WAV/AIFF) recorded on CD-R/-RW discs can be played.
Folder layers
Max. 8 layers (files in folders beyond the 8th
layer cannot be played)
Max. number of folders
999 folders
Max. number of files
999 files
When there are many folders or files, some time may be required for
loading.
Playback of discs created on a computer
Depending on the application’s settings and the computer’s environment settings, it may not be possible to play discs created on a computer. Record discs in a format playable on this unit. For details, contact
your application’s selling agent.
If the recording quality is poor due to the disc’s properties, scratches or
dirt on the disc or dirt on the recording lens, it may not be possible to
play the disc.
See Handling discs on page 38 for instructions on handling discs.
Creating backup discs
When CD-R/-RW discs are paused or left in the pause mode at cue
points for long periods of time, it may become difficult to play the disc at
that point, due to the properties of the disc. Also, when a specific point
is looped repeatedly an extremely large number of times, it may become
difficult to play that point.
When playing valuable discs, we recommend making backup discs.
4
En
Regarding copy protected CDs
This unit is designed to CD standards. Operation and performance of
discs with standards other than CD standards is not guaranteed.
This unit supports USB mass storage class USB devices (external hard
disks, portable flash memory devices, digital audio players, etc.).
Folder layers
A DualDisc is a new two-sided disc, one side of which contains DVD
content — video, audio, etc. — while the other side contains non-DVD
content such as digital audio material.
The non-DVD, audio side of the disc is not compatible with this player.
For more detailed information on the DualDisc specification, please refer
to the disc manufacturer or disc retailer.
About 8 cm discs
8 cm discs cannot be played. Do not mount 8 cm adapters on discs and
play the discs on this unit. The adapter could come off while the disc is
rotating, damaging both the disc and this unit.
CD-TEXT
This unit is compatible with CD-TEXT. Titles, album names and artist
names recorded in CD-TEXT are displayed. When multiple text data is
recorded, the first text data is displayed. The supported character codes
are listed below.
!ASCII
!ISO-8859-1
Max. 8 layers (files in folders beyond the 8th layer cannot
be played)
Max. number of folders
999 folders
Max. number of files
10 000 files (999 files for files not managed by rekordbox)
Supported file systems
FAT16 and FAT32 (HFS+ and NTFS are not supported.)
Before you start
About playing DualDiscs
About USB devices
USB devices that cannot be used
! Optical disc type devices such as external DVD/CD drives, etc., are
not supported.
! USB hubs cannot be used.
Cautions on using USB devices
! Some USB devices may not operate properly. Please note that
Pioneer will accept no responsibility whatsoever for loss of data
stored by the user on USB devices or other direct or indirect problems arising due to connection of USB devices to this unit.
! If a current larger than the allowable value is detected at this unit’s
USB device insertion slot, it may happen that the [USB STOP]
indicator flashes, the supply of power to the USB device is stopped
and communications are interrupted. To restore normal operation,
disconnect the USB device from this unit. Avoid using USB devices
for which excess currents have been detected. If normal operation is
not restored using the method above (if communications cannot be
established), turn this unit’s power off then back on.
! If the USB device is split into multiple partitions, only the first partition can be used.
! USB devices equipped with flash card readers may not operate.
! Depending on the USB device you are using, the desired performance may not be achieved.
Playable music file formats
This unit supports music files in the formats shown below.
! AAC files on CD-ROMs cannot be played.
! Only up to 99 minutes of AAC files can be played.
Type
MP3
File extension
.mp3
Compatible formats
Bit depth
Bit rate
Sampling frequency
Encoding method
MPEG-1 AUDIO LAYER-3
16 bit
32 kbps to 320 kbps
32 kHz, 44.1 kHz, 48 kHz
CBR, VBR
MPEG-2 AUDIO LAYER-3
16 bit
32 kbps to 160 kbps
16 kHz, 22.05 kHz, 24 kHz
CBR, VBR
MPEG-4 AAC LC
16 bit
16 kbps to 320 kbps
32 kHz, 44.1 kHz, 48 kHz
CBR, VBR
MPEG-2 AAC LC
16 bit
16 kbps to 320 kbps
32 kHz, 44.1 kHz, 48 kHz
CBR, VBR
AAC
.m4a, .aac and .mp4
WAV
.wav
WAV
16 bit, 24 bit
—
44.1 kHz, 48 kHz
Uncompressed PCM
AIFF
.aif, .aiff
AIFF
16 bit, 24 bit
—
44.1 kHz, 48 kHz
Uncompressed PCM
About MP3 files
About ID3 tags
MP3 files include constant bit rate (CBR) and variable bit rate (VBR) files.
Both types can be played on this unit, but the searching speed is slower
for VBR files than for CBR files. To prioritize operability, we recommend
recording files in CBR.
The tag information types which can be registered from a music file are
ID3 tags (v1, v1.1, v2.2.0, v2.3.0, and v2.4.0) or meta tags.
About AAC files
! AAC is the abbreviation of “Advanced Audio Coding”, a basic format
of audio compression technology used for MPEG-2 and MPEG-4.
! The file format and extension of AAC data depends on the application used to create the data.
! On this unit, in addition to AAC files encoded with iTunes® and with
the extension “.m4a”, files with the extensions “.aac” and “.mp4” files
can also be played. However, AAC files that are copyright-protected,
such as those purchased from the iTunes Store, cannot be played.
Also, depending on the version of iTunes in which the file was
encoded, it may not be possible to play the file.
En
5
Functions usable in combination
with a computer
About the included CD-ROM
This unit can be used in combination with a computer when the software
is installed onto the computer from the included CD-ROM.
The included CD-ROM contains the following two software programs.
rekordbox music management software
rekordbox is a software program allowing users who have purchased
a Pioneer DJ player supporting rekordbox to manage music files to be
used for DJ performances.
— rekordbox may be used for classifying and searching for music files
stored on your computer as well as creating playlists, all of which
can help improve your DJ performance.
— rekordbox allows the detecting, measuring, and editing of beats,
tempos (BPM), and other elements of your music files prior to a
performance.
— Hot cue point information can be set and saved ahead of time.
Not only can various types of point information and playlists prepared
with rekordbox be used for playback on Pioneer DJ players, the playback
history and point information can also be fed back to rekordbox after
performances.
Driver software
This driver software is an exclusive ASIO driver for outputting audio
signals from the computer. To use this unit connected to a computer on
which Windows is installed, install the driver software on the computer
beforehand.
There is no need to install the driver software when using Mac OS X.
For details, see Installing the driver software on page 26.
2 Restrictions. You will not copy or use the Program or
Documentation except as expressly permitted by this Agreement.
You will not transfer, sublicense, rent, lease or lend the Program,
or use it for third-party training, commercial time-sharing or
service bureau use. You will not Yourself or through any third
party modify, reverse engineer, disassemble or decompile the
Program, except to the extent expressly permitted by applicable
law, and then only after You have notified Pioneer in writing of
Your intended activities.
3 Ownership. Pioneer or its licensor retains all right, title and
interest in and to all patent, copyright, trademark, trade secret
and other intellectual property rights in the Program and
Documentation, and any derivative works thereof. You do not
acquire any other rights, express or implied, beyond the limited
license set forth in this Agreement.
4 No Support. Pioneer has no obligation to provide support,
maintenance, upgrades, modifications or new releases for the
Program or Documentation under this Agreement.
3 WARRANTY DISCLAIMER
THE PROGRAM AND DOCUMENTATION ARE PROVIDED “AS IS”
WITHOUT ANY REPRESENTATIONS OR WARRANTIES, AND YOU
AGREE TO USE THEM AT YOUR SOLE RISK. TO THE FULLEST EXTENT
PERMISSIBLE BY LAW, PIONEER EXPRESSLY DISCLAIMS ALL
WARRANTIES OF ANY KIND WITH RESPECT TO THE PROGRAM AND
DOCUMENTATION, WHETHER EXPRESS, IMPLIED, STATUTORY,
OR ARISING OUT OF COURSE OF PERFORMANCE, COURSE OF
DEALING OR USAGE OF TRADE, INCLUDING ANY WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,
SATISFACTORY QUALITY, ACCURACY, TITLE OR NON-INFRINGEMENT.
4 DAMAGES AND REMEDIES FOR BREACH
You agree that any breach of this Agreement’s restrictions would cause
Pioneer irreparable harm for which money damages alone would be
inadequate. In addition to damages and any other remedies to which
Pioneer may be entitled, You agree that Pioneer may seek injunctive
relief to prevent the actual, threatened or continued breach of this
Agreement.
5TERMINATION
Software end user license agreement
This Software End User License Agreement (“Agreement”) is between
you (both the individual installing the Program and any single legal
entity for which the individual is acting) (“You” or “Your”) and PIONEER
CORPORATION (“Pioneer”).
TAKING ANY STEP TO SET UP OR INSTALL THE PROGRAM MEANS
THAT YOU ACCEPT ALL OF THE TERMS OF THIS LICENSE AGREEMENT.
PERMISSION TO DOWNLOAD AND/OR USE THE PROGRAM IS
EXPRESSLY CONDITIONED ON YOUR FOLLOWING THESE TERMS.
WRITTEN OR ELECTRONIC APPROVAL IS NOT REQUIRED TO MAKE
THIS AGREEMENT VALID AND ENFORCEABLE. IF YOU DO NOT
AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, YOU ARE NOT
AUTHORIZED TO USE THE PROGRAM AND MUST STOP INSTALLING IT
OR UNINSTALL IT, AS APPLICABLE.
1DEFINITIONS
1 “Documentation” means written documentation, specifications
and help content made generally available by Pioneer to aid in
installing and using the Program.
2 “Program” means all or any part of Pioneer’s software licensed to
You by Pioneer under this Agreement.
2 PROGRAM LICENSE
1 Limited License. Subject to this Agreement’s restrictions,
Pioneer grants to You a limited, non-exclusive, non-transferable,
license (without the right to sublicense):
a To install a single copy of the Program in Your computer or
mobile device, to use the Program only for Your personal purpose complying with this Agreement and the Documentation
(“Authorized Use”);
b To use the Documentation in support of Your Authorized Use;
and
c To make one copy of the Program solely for backup purposes, provided that all titles and trademark, copyright and
restricted rights notices are reproduced on the copy.
6
En
Pioneer may terminate this Agreement at any time upon Your breach
of any provision. If this Agreement is terminated, You will stop using
the Program, permanently delete it from your computer or mobile
device where it resides, and destroy all copies of the Program and
Documentation in Your possession, confirming to Pioneer in writing
that You have done so. Sections 2.2, 2.3, 2.4, 3, 4, 5 and 6 will continue in
effect after this Agreement’s termination.
6 GENERAL TERMS
1 Limitation of Liability. In no event will Pioneer or its subsidiaries
be liable in connection with this Agreement or its subject matter,
under any theory of liability, for any indirect, incidental, special,
consequential or punitive damages, or damages for lost profits,
revenue, business, savings, data, use, or cost of substitute procurement, even if advised of the possibility of such damages or if
such damages are foreseeable. In no event will Pioneer’s liability
for all damages exceed the amounts actually paid by You to
Pioneer or its subsidiaries for the Program. The parties acknowledge that the liability limits and risk allocation in this Agreement
are reflected in the Program price and are essential elements of
the bargain between the parties, without which Pioneer would
not have provided the Program or entered into this Agreement.
2 The limitations or exclusions of warranties and liability contained
in this Agreement do not affect or prejudice Your statutory rights
as consumer and shall apply to You only to the extent such limitations or exclusions are permitted under the laws of the jurisdiction where You are located.
3 Severability and Waiver. If any provision of this Agreement is held
to be illegal, invalid or otherwise unenforceable, that provision
will be enforced to the extent possible or, if incapable of enforcement, deemed to be severed and deleted from this Agreement,
and the remainder will continue in full force and effect. The
waiver by either party of any default or breach of this Agreement
will not waive any other or subsequent default or breach.
4 No Assignment. You may not assign, sell, transfer, delegate or
otherwise dispose of this Agreement or any rights or obligations
Cautions on copyrights
rekordbox restricts playback and duplication of copyright-protected
music contents.
! When coded data, etc., for protecting the copyright is embedded in
the music contents, it may not be possible to operate the program
normally.
! When rekordbox detects that coded data, etc., for protecting the
copyright is embedded in the music contents, processing (playback,
reading, etc.) may stop.
Recordings you have made are for your personal enjoyment and according to copyright laws may not be used without the consent of the copyright holder.
! Music recorded from CDs, etc., is protected by the copyright laws of
individual countries and by international treaties. It is the full responsibility of the person who has recorded the music to ensure that it is
used legally.
! When handling music downloaded from the Internet, etc., it is the
full responsibility of the person who has downloaded the music to
ensure that it is used in accordance with the contract concluded
with the download site.
Minimum operating environment for rekordbox
Check that the computer provides the operating environment described
below before starting installation.
CPU
For Mac OS X
Macintosh computer equipped with a DualCore 1.6 GHz or greater Intel® processor
For Windows® 8,
Windows® 7,
Windows Vista®
and Windows® XP
PC/AT compatible computer equipped
with a Dual-Core 2.0 GHz or greater Intel®
processor
Required
memory
1 GB or more of RAM
Hard disk
250 MB or more of free space (not including space for storing
music files, etc.)
Optical drive
Optical disc drive on which the CD-ROM can be read
Sound
Audio output to speakers, headphones, etc. (internal or external
audio device)
Internet
connection
For user registration and inquiries, use a web browser supporting
128-bit SSL (Safari 2.0 or greater, Internet Explorer® 6.0 or greater,
etc.).
USB port
A USB port for connection of a USB device (flash memory, hard
disc, etc.) is required to transfer music files to the USB device.
!
!
!
!
Before you start
under it, whether voluntarily or involuntarily, by operation of law
or otherwise, without Pioneer’s prior written consent. Any purported assignment, transfer or delegation by You will be null and
void. Subject to the foregoing, this Agreement will be binding
upon and will inure to the benefit of the parties and their respective successors and assigns.
5 Entire Agreement. This Agreement constitutes the entire agreement between the parties and supersedes all prior or contemporaneous agreements or representations, whether written or
oral, concerning its subject matter. This Agreement may not be
modified or amended without Pioneer’s prior and express written
consent, and no other act, document, usage or custom will be
deemed to amend or modify this Agreement.
6 You agree that this Agreement shall be governed and construed
by and under the laws of Japan.
Full functionality is not guaranteed on all computers, even those meeting the
operating environment requirements described above.
Even with the required memory capacity indicated for the operating environment
above, in the cases described below the software may not provide full functionality and performance due to lack of memory. In this case, take the necessary
measures to ensure sufficient free memory. We recommend adding extra
memory in order to achieve stable performance.
— When there are many tracks being managed in the rekordbox library
— When resident programs and services are running
Depending on the computer’s power settings and other factors, the CPU and
hard disk processing capacity may be insufficient. When using laptop computers in particular, always keep the AC power connected and adjust the computer’s settings to maximize performance when using rekordbox.
Note that problems may arise with the functionality of rekordbox depending on
other software running on your computer.
Installing rekordbox
Cautions on installing rekordbox
Read Software end user license agreement carefully before installing
rekordbox.
! The included CD-ROM contains installation programs and operating
instructions in the following 12 languages:
English, French, German, Italian, Dutch, Spanish, Portuguese,
Russian, Chinese (simplified characters), Chinese (traditional characters), Korean, Japanese.
! When using an operating system in any language besides the ones
listed above, select [English] during the installation procedure.
Supported operating systems
1
Mac OS X (10.5.8, 10.6, 10.7 or 10.8)
32-bit version
1
64-bit version
1
32-bit version
1
64-bit version
1
®
Windows Vista Home Basic/Home Premium/Business/
Ultimate (SP2 or later)
32-bit version
1
64-bit version
1
®
Windows XP Home Edition/Professional (SP3 or later)
32-bit version
1
®
®
Windows 8/Windows 8 Pro
®
Windows 7 Home Premium/Professional/Ultimate
Read Cautions on installing rekordbox carefully before installing
rekordbox.
Installation procedure (Macintosh)
! Authorization of the computer’s administrator is required to install
and uninstall rekordbox.
Log on as the user which was set as the computer’s administrator
before installing.
1 When the included CD-ROM is inserted into the
computer’s CD drive, the CD drive opens on the screen.
Double-click the [CD_menu.app] icon.
! If the CD drive does not open on the screen when the CD-ROM is
inserted, use Finder to open the CD drive, then double-click the
[CD_menu.app] icon.
X.X.X
The latest information on rekordbox (supported operating systems,
required operating environment, etc.) is provided on the rekordbox
online support site. (Page 8)
En
7
2 When the CD-ROM’s menu is displayed, select
[rekordbox: Install Music Management Software], then
click [Start].
3 When the language selection screen appears, select
[English] and click [OK].
! You can select the one you desire from multiple languages as long
as the language is supported by the system environment of your
computer.
4 When the license agreement screen appears, read the
Software end user license agreement carefully. If you
agree to the Software end user license agreement, click
[Agree].
X.X.X
! If you do not consent to the provisions of the Software end user
license agreement, click [Cancel] and stop installation.
5 Install rekordbox by following the instructions on the
screen.
! Click [Cancel] to cancel installation after it has started.
! To close the CD-ROM menu, click [Exit].
3 When the license agreement screen appears, select
[English], read the Software end user license agreement
carefully, then click [Continue].
! You can select the one you desire from multiple languages as long
as the language is supported by the system environment of your
computer.
4 If you agree to the Software end user license
agreement, click [Agree].
! If you do not consent to the provisions of the Software end user
license agreement, click [Disagree] and stop installation.
5 Install rekordbox by following the instructions on the
screen.
Installation procedure (Windows)
! Authorization of the computer’s administrator is required to install
and uninstall rekordbox.
Log on as the user registered as the computer’s administrator before
installing rekordbox.
1 Insert the included CD-ROM into the computer’s CD
drive.
The CD-ROM menu is displayed.
! If the CD-ROM menu does not appear when the CD-ROM is inserted,
open the CD drive from [Computer (or My Computer)] in the [Start]
menu, then double-click the [CD_menu.exe] icon.
2 When the CD-ROM’s menu is displayed, select
[rekordbox: Install Music Management Software], then
click [Start].
! To close the CD-ROM menu, click [Exit].
8
En
Launching rekordbox/Viewing the
Operating Instructions
Log on as the user which was set as the computer’s administrator before
using rekordbox.
! When rekordbox is started up for the first time, the license key must
be entered. The license key is affixed to the CD-ROM package.
When rekordbox is started up, the operating instructions can be viewed
from the rekordbox [Help] menu.
! The Online manual and online support site can be accessed if the
computer is connected to the Internet.
For Mac OS X
Open the [Application] folder with Finder, then doubleclick [rekordbox 2.x.x.app].
! The 2.x.x indicates the rekordbox version.
For Windows® 8, Windows® 7, Windows Vista®
and Windows® XP
Double-click the [rekordbox 2.x.x] icon (shortcut) on the
desktop.
! The 2.x.x indicates the rekordbox version.
Using the online support site
Before making inquiries on rekordbox operating procedures or technical
issues, read the rekordbox operating instructions and online manual and
check the FAQ provided on the rekordbox online support site.
<rekordbox online support site>
http://rekordbox.com/
! User registration on the rekordbox online support site is required
prior to making inquiries concerning rekordbox.
! You will need to enter your license key during user registration, so
please have it handy. Also, be sure not to forget the login name (your
e-mail address) and the password specified for your user registration, as well as the license key.
! PIONEER CORPORATION collects your personal information for the
following purposes:
1 To provide customer support for your purchased product
2 To inform you of product or event information by e-mail
3 To obtain feedback collected by survey for product planning
purposes
— Your personal information is kept confidential corresponding to
the privacy policy set forth by our company.
— Pioneer’s privacy policy can be viewed on the rekordbox online
support site.
! When making inquiries regarding rekordbox, please be sure to furnish your computer type and specifications (CPU, installed memory,
other connected peripherals, etc.), the operating system and version
used, as well as concrete information regarding the issue at hand.
Before you start
— To inquire about configuring your computer with non-Pioneer
peripheral devices and to obtain the corresponding technical
support, contact the specific manufacturer or retailer.
! Further version updates are anticipated for improved functionality
and performance of rekordbox. Update programs will be available for
download on the rekordbox online support site. We strongly recommend you perform these updates and always use the latest version of
rekordbox.
Installing remotebox
Install remotebox on the mobile device (smartphone, tablet device, etc.).
For the installation procedure and supported operating system versions,
see the remotebox operating instructions or the Pioneer website (http://
pioneerdj.com/support/).
En
9
Connections
!
!
Connect the power cord after all the connections between devices have been completed.
Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.
Refer to the operating instructions for the component to be connected.
Be sure to use the included power cord.
Connecting the input/output terminals
Rear panel, front panel
Power amplifier,
powered speakers,
etc.
R
Portable audio DJ player
device
Power amplifier Microphone
(for booth monitor)
Power amplifier,
powered speakers, etc.
L
L
R
L
L
R
R L
L
R L
L
Computer
To power outlet Headphones
DJ
software
L
R
SIGNAL
GND
L
Analog player
L
12 dB
LINE 0 dB
R
L
MASTER OUT 1
R
MASTER
OUT 2
1
R
BOOTH
OUT
PHONO LINE
R
MIC
23 4 5
AUX IN
PHONO LINE
R
PHONO 2 / LINE 2
67
8
R
PHONO 1 / LINE 1
9
a7
AC IN
USB
8b
c
Rear panel
1MASTER OUT 1 terminals
Connect a power amplifier, powered speakers, etc., here.
Be sure to use these as balanced outputs. Be careful not to accidentally insert the power cord of another unit.
2MASTER OUT 2 terminals
Connect a power amplifier, powered speakers, etc., here.
3BOOTH output terminal
This is an output terminal for a booth monitor.
4MIC jack
Connects a microphone here.
5LINE, PORTABLE PLAYER selector switch
Switch this according to the audio level input to the [AUX] terminals.
6AUX IN terminals
Connect a line level output device (such as a DJ player) or a device
with a low gain (such as a portable audio player) here. Switch the
terminals’ input gain according to the connected device using the
[LINE, PORTABLE PLAYER] selector switch on this unit’s rear panel.
7LINE, PHONO selector switch
Switches the function of the [PHONO/LINE] terminals.
8PHONO1/LINE1 and PHONO2/LINE2 terminals
Connect a phono level output device (analog player (for MM cartridges), etc.) or a line level output device (DJ player, etc.) here.
Switch the terminals’ function according to the connected device
using the [LINE, PHONO] selector switch on this unit’s rear panel.
9Smartphone stand
A mobile device can be set here.
For instructions on mounting the smartphone stand, see Mounting
the smartphone stand on page 4.
10
En
d
e
Front panel
aSIGNAL GND terminal
Connects an analog player’s ground wire here. This helps reduce
noise when the analog player is connected.
b
USB terminal
Connect to a computer.
! A USB hub cannot be used.
! To maintain performance, use with this unit and the computer
connected directly using the included USB cable.
cAC IN
Connect this to a power outlet.
Connect the power cord after all the connections between devices
have been completed.
Be sure to use the included power cord.
dKensington security slot
ePHONES jacks
Connect headphones here.
Both stereo phone plugs (Ø 6.3 mm) and stereo mini phone plugs (Ø
3.5 mm) can be used.
! There are two output terminals (one for a stereo phone jack and
one for a mini-phone jack), but do not use both terminals simultaneously. If one is connected or disconnected while the other one
is being used, the volume of the other one in use may increase or
drop suddenly.
Connecting by wireless LAN
With this unit, a mobile device supporting wireless LAN connections
can be connected directly without using router, etc., to hold DJ performances using the mobile device application (remotebox).
This unit does not support wireless LAN connection via a router.
6 When [APPLY CHANGES?] appears on the main unit
display, turn the rotary selector to select [YES], then
press the rotary selector.
After this, make the settings for connection in the ENABLE mode.
1 Press the [INFO(UTILITY)] button for over 1 second.
2 Turn the rotary selector, select [WLAN INFO], then
press the rotary selector.
500mA
5V
BACK
TIME
USB
−AUTO CUE
AUX
LEVEL
DISC
WLAN
DECK1 PHONO1/LINE1
DECK2 PHONO2/LINE2
TRIM
−TOP
USB
TRIM
BACK
TIME
−AUTO CUE
QUANTIZE
DISC
−TOP
QUANTIZE
SELECT PUSH
CD
0
MASTER
LEVEL
−
USB
STOP
INFO
+9
HI
FLANGER
ECHO
0
HEADPHONES
MIXING
LEVEL /DEPTH
TRANS
+9
AUTO
BEAT LOOP
BEAT FX
MIN
MAX
CUE
MASTER
0
0
ECHO
VINYL MODE
ROLL
AUTO
BEAT LOOP
BEAT FX
MIN
MAX
EQ
+9
TEMPO
6 / 10 / 16 / WIDE
TAP
LOW
0
LOW
PITCH
+9
COLOR
SE
A
HI
ON /OFF
+9
−AUTO
H
RC
H
RC
MASTER
TEMPO
NOISE
TRACK SEARCH
MASTER
TEMPO
MIC
COLOR
TEMPO
SOUND COLOR FX
LOW
CRUSH
0
HI
CH1
FILTER
SHIFT
LOW
CH1
CH2
HI
CH2
10
9
9
8
8
7
7
4
3
3
2
CUE
2
1
1
0
CROSS F.CURVE
PLAY/PAUSE
MASTER
MASTER
THRU
A
HOT CUE
MODE
B
C
A
HOT CUE
SYNC
CALL
MODE
B
Press to return to the previous screen.
C
SYNC
CALL
PHONES
DELETE
Make a note of the [SSID] for future reference.
! The first 9 characters of the [SSID] are displayed. Turn the rotary
selector to display the portion that is not initially displayed.
4 Press the [BACK(TOP)] button.
5
4
0
0
6
5
3 Turn the rotary selector, select [SSID], then press the
rotary selector.
SHIFT
10
6
CUE
PLAY/PAUSE
FLANGER
CH1 MASTER CH2
+9
LOW
−AUTO
TEMPO
LEVEL /DEPTH
TRANS
MID
LEVEL
TEMPO
6 / 10 / 16 / WIDE
TAP
SE
A
BEAT
+9
MID
TRACK SEARCH
MIDI
MIC
LEVEL
BOOTH MONITOR
VINYL MODE
ROLL
INFO
− UTILITY
AUX
HI
SELECT PUSH
CD
ON /OFF
+9
− UTILITY
MIDI
BEAT
Connections
Making the wireless LAN connection
settings in the ENABLE mode
5 Turn the rotary selector, select [PASSWORD], then
press the rotary selector.
DELETE
Make a note of the [PASSWORD] for future reference.
Setting the wireless LAN function’s
operation mode
Set the wireless LAN function’s operation mode before connecting this
unit by wireless LAN.
The buttons and controls below are used for making the wireless LAN
function’s operation mode settings and wireless LAN connection
settings.
12
3
4
5
6
7
6 From the wireless LAN connection settings on the
mobile device or computer, display the connectable
[SSID]s.
! See your device’s operating instructions for instructions on searching for or displaying connectable [SSID]s.
7 On the mobile device or computer, select the [SSID]
checked in step 3.
8 Input the password you made a note of in step 5.
! For safety, be sure to change the default password. We recommend
changing the password periodically.
USB
TIME
−AUTO CUE
BACK
WLAN
−TOP
QUANTIZE
SELECT PUSH
CD
INFO
− UTILITY
MIDI
1
2
3
4
5
6
7
STANDBY/ON indicator
STANDBY/ON button
INFO(UTILITY) button
Main unit display
Rotary selector (SELECT PUSH)
BACK(TOP) button
WLAN indicator
1 Press the [STANDBY/ON] button.
Turn on the power of this unit.
The [STANDBY/ON] indicator lights green.
2 Press the [INFO(UTILITY)] button for over 1 second.
The [UTILITY] screen is displayed.
3 Turn the rotary selector, select [WLAN SETTING], then
press the rotary selector.
See page 25 for the list of [WLAN SETTING] items.
4 Turn the rotary selector, select [MODE], then press
the rotary selector.
5 Turn the rotary selector, select the mode you want to
set, then press the rotary selector.
—[ENABLE]: Activates the wireless LAN function.
—[DISABLE]: Turns the wireless LAN function off.
Checking the current wireless LAN
settings
1 Press the [INFO(UTILITY)] button for over 1 second.
The [UTILITY] screen is displayed.
2 Turn the rotary selector, select [WLAN INFO], then
press the rotary selector.
See page 24 for the list of [WLAN INFO] items.
3 Select the item you want to check, then press the
rotary selector.
The settings are displayed.
! When the [BACK(TOP)] button is pressed, the screen returns to the
[WLAN INFO] screen.
4 Press the [INFO(UTILITY)] button.
The [UTILITY] screen closes.
Changing the SSID and password
1 Press the [INFO(UTILITY)] button for over 1 second.
The [UTILITY] screen is displayed.
2 Turn the rotary selector, select [WLAN SETTING], then
press the rotary selector.
3 Turn the rotary selector, select [NETWORK SETTING],
then press the rotary selector.
En
11
4 Turn the rotary selector, input the [SSID], then press
the rotary selector.
5 Turn the rotary selector and set the security type at
[SECURITY].
[WEP64]: A 5-character password can be set.
[WEP128]: A 13-character password can be set.
[OPEN]: No password is set. Access is open to everyone.
! For a stronger security level, we recommend setting [WEP128] and
changing the password periodically.
6 Turn the rotary selector and set the password.
7 When [APPLY CHANGES?] appears on the main unit
display, turn the rotary selector to select [YES], then
press the rotary selector.
8 Press the [INFO(UTILITY)] button.
The [UTILITY] screen closes.
Cautions concerning security when using
wireless LAN products
Wireless LAN connections offer the advantage that because the information is exchanged between the computer, etc., and the wireless LAN
access point using radio waves rather than a LAN cable, LAN connections are possible as long as the devices are within the range of the radio
waves.
On the other hand, because the radio waves reach all places within their
range, even through such obstacles as walls, the problems below may
occur if the security settings have not been made.
! Exchanged information may be viewed surreptitiously
Third parties with malicious intents may deliberately intercept the
radio waves and surreptitiously view the exchanged information,
including ID numbers, passwords, credit card numbers and other
personal information or e-mail messages.
! Your network may be infiltrated without authorization
Third parties with malicious intents may access your personal or
company network without authorization and obtain personal or confidential information (leakage of information), impersonate specific
persons and release false information (impersonation), rewrite intercepted information and issue the rewritten information (falsification)
or plant computer viruses, etc., that damage your data or system
(vandalism).
Wireless LAN products normally have a security system. Using the
product with the security settings activated decreases the above
risks.
It is your responsibility to thoroughly understand the risks of using
wireless LAN products without security settings and to make the
security settings according to your personal judgment.
12
En
Part names and functions
4
2
1
BACK
TIME
−AUTO CUE
6
500mA
5V
USB
1
4
AUX
LEVEL
DISC
WLAN
DECK1 PHONO1/LINE1
DECK2 PHONO2/LINE2
TRIM
−TOP
USB
TRIM
DISC
−TOP
QUANTIZE
SELECT PUSH
−
USB
STOP
INFO
0
MASTER
LEVEL
BEAT
+9
BEAT FX
MIN
MAX
CUE
0
0
−AUTO
TEMPO
6 / 10 / 16 / WIDE
TAP
LOW
PITCH
+9
CRUSH
HI
CH1
LOW
MASTER
TEMPO
CH1
CH2
CH2
3
SHIFT
10
9
9
8
8
7
7
6
6
5
5
0
4
3
3
2
CUE
2
1
0
TEMPO
HI
10
4
CUE
TRACK SEARCH
6
FILTER
6
−AUTO
MIC
COLOR
SOUND COLOR FX
0
SE
A
HI
ON /OFF
+9
COLOR
LOW
PLAY/PAUSE
MAX
H
RC
NOISE
SHIFT
MIN
+9
MASTER
TEMPO
TEMPO
VINYL MODE
ROLL
LOW
0
3
ECHO
BEAT FX
CH1 MASTER CH2
+9
LOW
H
RC
TRACK SEARCH
FLANGER
AUTO
BEAT LOOP
EQ
LEVEL
SE
A
LEVEL /DEPTH
TRANS
MID
MASTER
TEMPO
6 / 10 / 16 / WIDE
TAP
BEAT
+9
MID
AUTO
BEAT LOOP
MIDI
MIC
LEVEL
BOOTH MONITOR
VINYL MODE
ROLL
ECHO
0
HEADPHONES
MIXING
LEVEL /DEPTH
FLANGER
TRANS
INFO
− UTILITY
AUX
HI
Part names and functions
+9
HI
SELECT PUSH
CD
ON /OFF
+9
− UTILITY
MIDI
6
BACK
TIME
−AUTO CUE
QUANTIZE
CD
1
CROSS F.CURVE
0
PLAY/PAUSE
MASTER
MASTER
THRU
A
HOT CUE
MODE
B
C
HOT CUE
SYNC
CALL
DELETE
A
MODE
PHONES
B
C
SYNC
CALL
DELETE
5
1Power & wireless section (page 14)
2USB device section (page 14)
3Player section (page 14)
4Browse section (page 17)
5Mixer section (page 18)
6Effect section (page 19)
En
13
2AUTO BEAT LOOP control
Power & wireless section
!Turn:
Set the length of the auto beat loop’s loop in units of beats.
!Press:
Turns loop playback on and off.
3
12
3TRACK SEARCH o, p buttons
Use these to search for the beginnings of tracks.
WLAN
NO1/LINE1
DEC
4Jog dial
!Scratch
When the [VINYL] mode is set and the jog dial is turned while
touching a metal part on its top, the sound is played according to
the direction and speed at which the jog dial is turned.
! Pitch bend
The playing speed can be adjusted by turning the outer part of
the jog dial during playback.
1STANDBY/ON indicator
This lights when this unit’s power is on or in standby.
2STANDBY/ON button
This switches this unit’s power between on and standby.
= Turning the power on (p.21)
= To set to the standby mode (p.21)
5SHIFT button
3WLAN indicator
When another button is pressed while pressing the [SHIFT] button, a
different function is called out.
This lights when a link is established with the mobile device.
6CUE button
USB device section
Sets a cue point or moves the cue point.
= Setting Cue (p.15)
7f (PLAY/PAUSE) button
Use this to play/pause tracks.
500mA
5V
8DISCh button
1
Use this to eject discs.
= Ejecting discs (p.21)
2
−
USB
STOP
9VINYL MODE button
Use this to switch between the [VINYL] mode and normal mode.
aTEMPO RANGE button
1USB device insertion slot
The [TEMPO] slider’s range of variation switches each time this is
pressed.
Insert USB devices here.
= Connecting and disconnecting USB devices (p.22)
bMASTER TEMPO button
2USB STOP button
Press this for over 2 seconds before disconnecting USB devices from
this unit.
Use this to turn the master tempo function on and off.
cTEMPO slider
Use this to adjust the track playing speed.
Player section
dTEMPO indicator
DISC
BEAT
FLANGER
TRANS
1
2
8
LEVEL /DEPTH
AUTO
BEAT LOOP
VINYL MODE
ROLL
ECHO
9
BEAT FX
MIN
eMASTER button
MAX
TEMPO
6 / 10 / 16 / WIDE
TAP
SE
A
a
−AUTO
H
RC
TRACK SEARCH
MASTER
TEMPO
3
b
TEMPO
SHIFT
c
0
6
fSYNC button
gHOT CUE/4-BEAT SAMPLER indicator
These light to indicate whether the hot cue/sampler section is set to
the hot cue or sampler function.
CUE
d
PLAY/PAUSE
MASTER
e
7
A
HOT CUE
MODE
B
g
hi
1AUTO BEAT LOOP indicator
This lights during loop playback.
En
C
SYNC
CALL
DELETE
14
Use this to set the track loaded in this unit as the master for the beat
sync function.
= Using the SYNC function (p.23)
Synchronizes to the master deck’s tempo.
= Using the SYNC function (p.23)
4
5
When the upper or lower indicator is flashing, if the [TEMPO] slider
is moved in the direction of the lit indicator until the indicator turns
off, operations with the [TEMPO] slider are enabled.
When one of the indicators is lit, operations with the [TEMPO] slider
are disabled.
j
f
hMODE (HOT CUE/4-BEAT SAMPLER) button
Switches the function of the hot cue/sampler section with each
press.
iCALL button
Calls out the hot cue.
jHOT CUE/4-BEAT SAMPLER (A, B, C) button
When using with the hot cue function
!Press:
— When no hot cue is set during playack or while pausing:
A hot cue is set at the position at which the button is pressed.
— When a hot cue is set during playback or while pausing:
The hot cue is played.
![SHIFT] + press:
Deletes the hot cue.
When using with the sampler function
For details, see Using the sampler function on page 17.
Playback
Pausing
During playback, press the [f (PLAY/PAUSE)] button.
! Playback resumes when [f (PLAY/PAUSE)] button is pressed
again.
! When tracks have been loaded from a disc, the disc automatically
stops spinning if no operation is performed for 100 minutes while in
the pause mode.
Forward and reverse scanning
Turn the jog dial while pressing the [SHIFT] button.
The track is fast-forwarded/fast-reversed in the direction in which the jog
dial is spun.
! When the [SHIFT] button is released, this function is canceled.
! When you stop the jog dial from spinning, normal playback resumes.
! The fast-forward/fast-reverse speed can be adjusted according to the
speed at which the jog dial is spun.
Selecting the playing speed adjustment range
Press the [TEMPO RANGE] button.
The playing speed adjustment range switches each time the button is
pressed.
[WIDE, ±16, ±10, ±6] is displayed on the main unit display.
! Adjustment is possible in units of 0.02 % when [±6] % is selected,
0.04 % when [±10] % or [±16] % is selected, and 0.5 % when [WIDE]
is selected.
! The [WIDE] adjustment range is ±100 %. When set to –100 %, playback stops.
![WIDE] can only be selected when playing music CDs (CD-DA).
Adjusting the playing speed without changing
the pitch (Master Tempo)
Press the [MASTER TEMPO] button.
The [MASTER TEMPO] indicator lights. The pitch does not change even
when the playing speed is changed with the [TEMPO] slider.
! The sound is digitally processed, so the sound quality changes.
Part names and functions
Press the [f (PLAY/PAUSE)] button.
The rate at which the playing speed is changed is indicated on the main
unit display.
Setting Cue
1 During playback, press the [f (PLAY/PAUSE)]
button.
Playback is paused.
2 Press the [CUE] button.
Finding the beginnings of tracks (Track
Search)
Press one of the [TRACK SEARCH o, p] buttons.
Press the [p] to move to the beginning of the next track.
When [o] is pressed, playback returns to the beginning of the currently playing track. When pressed twice in a row, playback returns to
the beginning of the previous track.
! It is not possible to move to a different category or folder with the
track search function.
Frame search
In the pause mode, spin the jog dial.
The pause position can be moved in units of single frames.
! The position is moved in the direction of playback when the jog dial
is spun clockwise, in the reverse direction when it is spun counterclockwise. The position moves 135 for one revolution of the jog dial.
Super fast track search
The point at which the track is paused is set as the cue point.
The [f (PLAY/PAUSE)] indicator flashes and the [CUE] indicator
lights. No sound is output at this time.
! When a new cue point is set, the previously set cue point is canceled.
Adjusting the cue point position
1 When paused at the cue point, touch the top of the
jog dial while pressing the [SHIFT] button.
The [f (PLAY/PAUSE)] and [CUE] indicators flash.
The cue point can be fine-adjusted in units of single frames.
2 Press the [CUE] button.
The position at which the button was pressed is set as the new cue point.
! When a new cue point is set, the previously set cue point is canceled.
Returning to Cue Point (Back Cue)
During playback, press the [CUE] button.
The set immediately returns to the currently set cue point and pauses.
! When the [f (PLAY/PAUSE)] button is pressed, playback starts
from the cue point.
Checking Cue Point (Cue Point Sampler)
Turn the jog dial while pressing one of the
[TRACK SEARCH o, p] buttons.
The track is advanced at high speed in the direction in which the jog dial
was turned.
Keep pressing the [CUE] button after returning to the
cue point.
Playback starts from the set cue point. Playback continues while the
button is held in.
Adjusting the playing speed (Tempo
control)
Move the [TEMPO] slider forward or backward.
The playing speed increases when the slider is moved to the [+] side
(towards you), decreases when the slider is moved to the [–] side (away
from you).
En
15
Setting the loop automatically based on
the track’s tempo (Auto Beat Loop)
1 During playback, turn the [AUTO BEAT LOOP] control
to set the length for loop playback in number of beats.
The contents displayed on the main unit display switch to the auto beat
loop/effect display.
2 Press the [AUTO BEAT LOOP] control to start loop
playback.
The loop out point is set automatically according to the track’s tempo
(BPM) and loop playback starts.
! Loop playback cannot be performed properly if the BPM value is not
displayed.
! When auto beat loop is set, the cue point moves to the loop in point.
! When the [AUTO BEAT LOOP] control is pressed during loop playback, loop playback is canceled.
Operating the jog dial
! The top of the jog dial has an embedded switch. Do not place objects
on the jog dial or subject it to strong forces.
! Water or other liquids getting into the set will lead to malfunction.
Switching the jog dial mode
The jog dial has two modes.
![VINYL] mode: When a metal part of the top of jog dial is touched
during playback, playback stops, and when the jog dial is turned at
this point the sound is output according to the rotation of the jog
dial.
! Normal mode: Playback does not stop even when a metal part of the
top of jog dial is touched. Also, such operations as scratching cannot be performed.
Press the [VINYL MODE] button.
The jog mode switches to the [VINYL] mode and the [VINYL MODE]
button lights.
When a hot cue is set, the point can be called out instantaneously and
playback can be started from that point. A maximum of 3 hot cues can
be set per disc. For music files on USB devices, up to 3 hot cues can be
set per track.
Setting Hot Cue
1 Press the [MODE (HOT CUE/4-BEAT SAMPLER)] button
to switch to the hot cue mode.
The [HOT CUE] indicator lights.
2 During playback or while pausing, press one of the
[HOT CUE/4-BEAT SAMPLER (A, B, C)] buttons at the
point at which you want to set the hot cue.
The point at which the button was pressed is set as the hot cue, and the
corresponding [HOT CUE/4-BEAT SAMPLER (A, B, C)] button lights
blue.
! During loop playback, the loop is registered as a hot cue.
! The direction of playback is not recorded for hot cues.
! When a hot cue is set during scratch play, playback may stop
temporarily.
! When the quantize function is on, there may be a slight delay in
operation of this function in order to synchronize the beat.
! It is not possible to store a hot cue at a
[HOT CUE/4-BEAT SAMPLER (A, B, C)] button at which a hot cue is
already stored. To do so, first delete the hot cue stored at that button.
Playing hot cues
During playback or while pausing, press one of the
[HOT CUE/4-BEAT SAMPLER (A, B, C)] buttons.
The hot cue recorded at that button is called out and playback begins.
Calling out hot cues (on discs)
1 Load a disc in this unit.
Scratch
2 Press the [CALL] button.
When the jog dial is set to the [VINYL] mode, the sound can be played
according to the direction and speed at which the jog dial is turned by
turning the jog dial while touching a metal part on its top.
The unit switches to the hot cue callout mode and the
[HOT CUE/4-BEAT SAMPLER (A, B, C)] buttons at which hot cues are
stored flash.
1 Press the [VINYL MODE] button.
3 Press the [HOT CUE/4-BEAT SAMPLER (A, B, C)] button
whose hot cue you want to call out.
Set the jog mode to the [VINYL] mode.
2 During playback, touch a metal part of the top of the
jog dial.
Playback stops.
3 While still touching a metal part of the top of the jog
dial, turn the jog dial in the direction and at the speed at
which you want to play the sound.
The sound is played according to the spinning direction and speed of the
jog dial.
4 Take your finger off the metal part of the top of the
jog dial.
Normal playback resumes.
The hot cue is called out and the [HOT CUE/4-BEAT SAMPLER (A, B, C)]
button lights blue.
! If you do not want to call out a hot cue, press the [CALL] button
without pressing a [HOT CUE/4-BEAT SAMPLER (A, B, C)] button.
The buttons whose hot cues were not called out turn off.
Calling out hot cues (on a storage (USB) device)
1 Connect a storage device (USB) to this unit.
2 Load the track whose hot cue you want to call out.
3 Press the [CALL] button.
Pitch bend
The unit switches to the hot cue callout mode and the
[HOT CUE/4-BEAT SAMPLER (A, B, C)] buttons at which hot cues are
stored flash.
During playback, spin the outer section of the jog dial.
4 Press the [HOT CUE/4-BEAT SAMPLER (A, B, C)] button
whose hot cue you want to call out.
The playing speed increases when spun clockwise, decreases when
spun counterclockwise. When spinning is stopped, playback returns to
the normal speed.
! When the jog mode is set to the normal mode, the same operation is
possible by spinning the top of the jog dial.
16
Using hot cues
En
The hot cue is called out and the [HOT CUE/4-BEAT SAMPLER (A, B, C)]
button lights blue.
! If you do not want to call out a hot cue, press the [CALL] button
without pressing a [HOT CUE/4-BEAT SAMPLER (A, B, C)] button.
The buttons whose hot cues were not called out turn off.
! If you accidentally cancel the hot cue callout mode, once again press
the [CALL] button.
! rekordbox can be preset so that hot cues are called out automatically
when tracks are loaded.
“
” is displayed on the track list for tracks for which auto hot cue
loading is set.
Browse section
4
1
USB
The hot cue stored at the corresponding button is deleted, the button
turns off, and a new hot cue can now be stored at that button.
Using the sampler function
Four beats of sound can be sampled. Samples that have been stored can
be called out and played later.
! Up to three samples can be stored per deck.
! After editing (recording or deleting) a sampled sound source, be sure
to press the [STANDBY/ON] button to turn the power off.
If the power is turned off without pressing the [STANDBY/ON] button, the edited results are not retained in the memory.
Storing samples
The [4-BEAT SAMPLER] indicator lights.
2 Press one of the [HOT CUE/4-BEAT SAMPLER (A, B, C)]
buttons.
The point at which the button is pressed is set as the recording start
point, four beats worth of sound or the first 5 seconds of the sound is
sampled, and the button lights blue.
! If a sample is already stored at a
[HOT CUE/4-BEAT SAMPLER (A, B, C)] button, it is not possible
to store a new sample there. To store a new sample, first delete the
stored sample.
Playing samples
Press and hold a [HOT CUE/4-BEAT SAMPLER (A, B, C)]
button.
The sample is played while the button is pressed.
! The volume of the sample can be adjusted at [SAMPLE LEVEL] on
the [UTILITY] menu.
7
SELECT PUSH
CD
INFO
3
8
− UTILITY
MIDI
a
b
c
d
9
e
f
g
h
i
j
k
USB button
1
Press this to play the music files on a USB device.
= Playing media connected to or inserted in this unit (p.22)
2
CD button
Press this to play the music files on a CD or CD-ROM.
= Playing media connected to or inserted in this unit (p.22)
3
1 Press the [MODE (HOT CUE/4-BEAT SAMPLER)] button
to switch to the sampler mode.
BACK
−TOP
QUANTIZE
Part names and functions
Press one of the [HOT CUE/4-BEAT SAMPLER (A, B, C)]
buttons while pressing the [SHIFT] button.
6
−AUTO CUE
2
Deleting hot cues
5
TIME
MIDI button
Press this to use DJ software.
= Using the DJ software (p.27)
4INFO(UTILITY) button
!Press:
The main unit display switches to the information display mode.
When in the information display mode, the information display
section switches between the track name display, beat display or
auto loop/effect display each time the button is pressed.
! Press for over 1 second:
The [UTILITY] screen is displayed.
= Changing the settings (p.24)
5TIME (AUTO CUE,QUANTIZE) button
!Press:
The main unit display’s time display mode switches to the
elapsed time or remaining time display.
! Press for over 1 second:
When pressed for over 1 second, auto cue turns on and off.
![SHIFT] + press:
This turns the QUANTIZE function on and off.
= Using the QUANTIZE function (p.23)
6Main unit display
Deleting samples
Press one of the [HOT CUE/4-BEAT SAMPLER (A, B, C)]
buttons while pressing the [SHIFT] button.
The sampled sound stored at the corresponding button is deleted, the
button turns off, and a new sample can now be stored at that button.
7BACK(TOP) button
!Press:
The screen moves back to the layer above.
! Press for over 1 second:
Press for over 1 second to move to the top layer.
8Rotary selector (SELECT PUSH)
9This displays the track number.
aREMAIN
This is displayed when the time display is set to the remaining time.
bTime display (minutes, seconds and frames)
cBPM
Displays BPM (Beats Per Minute) of the track currently being played.
The value changes according to the position of the [TEMPO] slider.
dTEMPO %
This indicates the percentage by which the playing speed is
changed.
En
17
ePlaying speed adjustment range display
This indicates the range by which the playing speed can be adjusted.
fA. CUE
This is displayed when the auto cue mode is set.
gQUANTIZE
This is displayed when [QUANTIZE] is turned on.
hINFO
This is displayed when the main unit display is set to the information
display mode.
iBROWSE
This is displayed when the main unit display is set to the browse
display mode.
Setting auto cue
When a track is loaded or the track search operation is performed, the
silent section at the beginning of the track is skipped and the cue point
is automatically set at the point immediately before the sound starts.
Press the [TIME (AUTO CUE, QUANTIZE)] button for over
1 second.
Auto cue is set to on.
[A. CUE] is displayed on the main unit display.
! When the [TIME (AUTO CUE, QUANTIZE)] button is pressed again
for over 1 second, auto cue is set to off.
! The auto cue level setting remains in the memory, even when the
power is turned off.
Changing the auto cue level
jPlaying address display
This displays a track as a bar graph. The graph lights up from the left
edge when the elapsed time is displayed and turns off from the left
edge when the remaining time is displayed. The entire graphs starts
flashing slowly when only 30 seconds remain to the end of the track,
then starts flashing quickly when only 15 seconds remain.
The acoustic pressure level identified as a silent section with the auto
cue function can be selected from eight levels.
! The auto cue level setting remains in the memory, even when the
power is turned off.
1 Press the [INFO(UTILITY)] button for over 1 second.
kInformation display section
The [UTILITY] screen is displayed.
Switching the browse display mode
There are two types of browse display modes: library browse and folder
browse. The display mode differs according to whether or not rekordbox
library information is stored on the USB device.
— When library information is stored on the USB device: The display is
set to the library browse mode. The music files are displayed in five
categories (artist, album, title, BPM and playlist).
— When no library information is stored on the USB device: The information is displayed in the folder browse mode. The folders and tracks
on the medium are displayed in a tree structure.
2 Turn the rotary selector then press it.
Select [A. CUE LEVEL].
3 Turn the rotary selector then press it.
The auto cue level setting changes.
Mixer section
1
500mA
5V
AUX
LEVEL
WLAN
DECK1 PHONO1/LINE1
Switching the information display mode
The information display section switches between the track name
display, beat display or auto loop/effect display each time the
[INFO(UTILITY)] button is pressed.
Using the beat display function
This displays the beat and playback position of the currently playing
track.
9
TRIM
2
DECK2 PHONO2/LINE2
TRIM
MASTER
LEVEL
−
USB
STOP
0
a
ON /OFF
+9
+9
HI
3
MIC
LEVEL
BOOTH MONITOR
4
+9
MID
CUE
AUX
HI
0
HEADPHONES
MIXING
f
+9
b
MID
MASTER
0
0
EQ
LEVEL
CH1 MASTER CH2
5
+9
g
+9
LOW
LOW
0
NOISE
LOW
PITCH
+9
HI
ON /OFF
+9
COLOR
1
d
2
e
3
MIC
COLOR
h
SOUND COLOR FX
LOW
CRUSH
HI
CH1
FILTER
LOW
CH1
CH2
HI
CH2
c
10
9
8
1
5
4
3
5
4
2
1
1
0
7
1 measure
6
3
2
1/2 beat
9
7
6
6
1 beat
10
8
7
CROSS F.CURVE
0
THRU
8
PHONES
2
1 Beat display section
2 Auto loop/effect display section
! When the track name display is selected in the information display
mode, it automatically switches to the auto loop/effect display when
one of the following operations is performed:
— Auto beat loop setting
— Effect setting
18
En
1DECK, PHONO/LINE selector switch
Used to select the [CH 1] or [CH 2] input source from among the
devices connected to this unit.
! When set to [PHONO/LINE], the mixer section can be used as a
DJ mixer.
2TRIM control
Adjusts the level of audio signals input in each channel.
3EQ (HI, MID, LOW) controls
These adjust the sound quality of the respective channels.
These adjust the [HI] (high range), [MID] (middle range) and [LOW]
(low range), respectively.
4HEADPHONES MIXING control
Adjusts the balance of the monitor volume between the sound of the
deck whose [
] button is pressed and the master sound.
6Channel fader
Adjusts the level of audio signals output in each channel.
) (crossfader curve
This switches the crossfader curve characteristics.
! When the [
(CH1)] button or [
(CH2)] button is pressed again,
monitoring is canceled.
! Monitoring of the sound output from the [MASTER OUT 1] and
[MASTER OUT 2] terminals (the sound of the master channel) cannot be canceled.
Using a microphone
8Crossfader
The sound of the respective channels is output according to the
curve characteristics selected with the [THRU,
,
] selector
switch.
2 Turn the [MIC LEVEL] control clockwise.
The sound of the microphone is output from the speakers.
9MASTER LEVEL control
Adjusts the audio level output from the [MASTER OUT 1] and
[MASTER OUT 2] terminals.
aBOOTH MONITOR control
Adjusts the level of audio signals output from the [BOOTH] terminal.
bLEVEL indicator
This displays the audio levels of the respective channels.
c
1 Press the [MIC (ON/OFF)] button.
Part names and functions
Adjusts the audio level output from the [PHONES] terminal.
,
4 Turn the [HEADPHONES LEVEL] control.
Sound is output from the headphones.
5HEADPHONES LEVEL control
7CROSS F. CURVE (THRU,
selector switch)
— At the center position: The volume of the [CH 1] and [CH 2]
sound is the same as the volume of the sound output from the
[MASTER OUT 1] and [MASTER OUT 2] terminals (the sound of
the master channel).
— When turned clockwise: The volume of the sound output from the
[MASTER OUT 1] and [MASTER OUT 2] terminals (the sound of
the master channel) becomes relatively louder.
Adjusting the sound quality
Turn the [MIC EQ] control.
— When turned fully clockwise, the attenuation of the bass sound is
maximum.
— When turned fully counterclockwise, the attenuation of the treble
sound is maximum.
(CH1, CH2) button
Used to monitor the [CH 1] or [CH 2] sound.
dAUX LEVEL control
Adjusts the audio level input to the [AUX IN] terminals.
eAUX (ON/OFF) button
Using the AUX function
1 Press the [AUX (ON/OFF)] button.
2 Turn the [AUX LEVEL] control.
These turn the AUX effects on/off.
Adjusts the audio level input to the [AUX IN] terminals.
fMIC LEVEL control
Adjusts the audio level input to the [MIC] terminal.
gMIC EQ control
This adjusts the microphone’s sound quality.
hMIC (ON/OFF) button
Turn the [BOOTH MONITOR] control.
Turns the microphone on/off.
Adjusts the level of audio signals output from the [BOOTH] terminal.
Adjusting the sound quality
Turn the [HI], [MID], [LOW] controls for the respective
channels.
! The sound for that range can be turned completely off by turning the
control all the way counterclockwise (isolator function).
1 Connect headphones to the [PHONES] terminal.
For instructions on connections, see Connecting the input/output terminals on page 10.
(CH1)] or [
(CH2)] button.
Select the channel you want to monitor.
! This operation is not necessary to monitor the sound output from the
[MASTER OUT 1] and [MASTER OUT 2] terminals (the sound of the
master channel).
3 Turn the [HEADPHONES MIXING] control.
Effect section
BEAT
LEVEL /DEPTH
FLANGER
TRANS
ROLL
ECHO
1
3
BEAT FX
MIN
2
NOISE
5
PITCH
−
6
6
+9
−
HI
LOW
COLOR
+9
MAX
TAP
SE
A
COLOR
4
−AUTO
R
Monitoring sound with headphones
2 Press the [
Audio is output from the [BOOTH]
terminal
SOUND COLOR FX
LOW
CRUSH
FILTER
CH1
HI
CH2
1BEAT control
Selects the beat multiple for synchronizing the beat effect.
2BEAT FX (TRANS, FLANGER, ECHO, ROLL) buttons
These turn the respective beat effects on and off.
3LEVEL/DEPTH control
Adjusts the quantitative parameter of the beat effect.
— When turned counterclockwise: The volume of [CH 1] and [CH 2]
becomes relatively louder.
En
19
4TAP (AUTO) button
Switches the BPM measurement mode.
— AUTO mode: The [TAP (AUTO)] button turns off and the BPM is
measured automatically from the audio signal being input. The
[AUTO] mode is set when this unit’s power is turned on.
— TAP mode: The [TAP (AUTO)] button lights and the BPM is
input manually by tapping the [TAP (AUTO)] button. When the
[TAP (AUTO)] button is pressed, the TAP mode is set.
! The BPM measuring range in the AUTO mode is BPM = 70 – 180.
For some tracks, it may not be possible to measure the BPM
correctly.
! BPMs set in the TAP mode are only valid for the BEAT FX
function.
5SOUND COLOR FX (NOISE, PITCH, CRUSH, FILTER)
buttons
These turn the respective SOUND COLOR FX on and off.
6COLOR control
This changes the parameters of the SOUND COLOR FX of the different channels.
Using the beat effect function
This unit is equipped with four effect buttons. Effects can be applied to
the sound by pressing one of the effect buttons.
Press one of the [BEAT FX (TRANS, FLANGER, ECHO,
ROLL)] buttons.
The button that was pressed flashes.
The effect is applied in beat with the track.
The effect differs for the different buttons. For details on the different
effects, see the table below.
! When a button that is flashing is pressed again, the effect is turned
off.
Effect Name
Descriptions
LEVEL/DEPTH
TRANS
Cuts the sound according to the
beat multiple set with the [BEAT]
control.
Sets the balance between
the original sound and the
effect sound.
FLANGER
Creates a one-cycle flanger effect
according to the beat multiple set
with the [BEAT] control.
The further the control is
turned clockwise, the more
the effect is stressed.
ECHO
Outputs a delay sound several
times that attenuates gradually
according to the beat multiple set
with the [BEAT] control.
With 1/1 beat echoes, the delay
sounds are faded out according
to the track’s tempo even after the
input sound has been cut.
Use this to set the balance
between the original sound
and the echo sound.
ROLL
Records the input sound at the
point the [ROLL] button is pressed
Sets the balance between
and repeatedly outputs the
the original sound and the
recorded sound according to the
roll sound.
beat multiple set with the [BEAT]
control.
Varying the effect
Turn the [LEVEL/DEPTH] control.
The effect changes according to the direction in which the
[LEVEL/DEPTH] control is turned and its position.
Inputting the BPM manually
1 Press the [TAP (AUTO)] button.
The [TAP (AUTO)] button lights and the mode switches to the TAP
mode.
20
En
2 Tap the [TAP (AUTO)] button at least 2 times in
rhythm with the beat (in quarter notes) of the sound
being played.
The average value of the interval at which the [TAP (AUTO)] button is
tapped with a finger is displayed in the auto loop/effect display section.
! To set the mode back to AUTO, press the [TAP (AUTO)] button for
over 1 second.
SOUND COLOR FX
These effects change in association with the [COLOR] controls for the
different channels.
1 Press one of the
[SOUND COLOR FX (NOISE, PITCH, CRUSH, FILTER)]
buttons.
This selects the type of effect.
The button that was pressed flashes.
! For the types of effects, see Types of SOUND COLOR FX effects.
! The same effect is set for [CH 1] and [CH 2].
2 Turn the [COLOR] control.
The effect is applied to the channel(s) for which the control(s) was (were)
pressed.
Types of SOUND COLOR FX effects
Effect Name
Descriptions
PITCH
Turn counterclockwise: The
Changes the musical interval
pitch decreases.
within the range of 1 octave
Turn clockwise: The pitch
up and down.
increases.
NOISE
White noise generated inside
this unit is mixed in to the
sound of the channel via the
filter and output.
! The volume can be
adjusted by turning the
[TRIM] controls for the
respective channels.
The sound quality can
be adjusted by turning
the [EQ (HI, MID, LOW)]
controls.
Turn counterclockwise: The
cut-off frequency of the filter
through which the white noise
passes gradually decreases.
Turn clockwise: The cut-off
frequency of the filter through
which the white noise passes
gradually increases.
CRUSH
Changes the original sound
to a crushed-like sound for
output.
Turn counterclockwise:
Increases the sound’s distortion.
Turn clockwise: The sound is
crushed before passing through
the high pass filter.
Outputs sound that has
passed through a filter.
Turn counterclockwise:
Gradually decreases the lowpass filter’s cutoff frequency.
Turn clockwise: Gradually
increases the high-pass filter’s
cutoff frequency.
FILTER
[COLOR] control
Operation
Turning the power on
Ejecting discs
1 Make all the connections, then plug the power cord
into a power outlet.
1 Press the [f (PLAY/PAUSE)] button during
playback, or if a cue point is set, press the [CUE] button
during playback (back cue), then press the [DISCh]
button to eject the disc.
= Connections (p.10)
The [STANDBY/ON] indicator lights green.
When the button is pressed, disc rotation stops and the disc comes out
of the disc insertion slot.
To set to the standby mode
Operation
2 Press the [STANDBY/ON] button.
When this unit’s power is on, press the [STANDBY/ON]
button for over 1 second.
This unit is set to the standby mode.
The [STANDBY/ON] indicator lights red.
! When the [STANDBY/ON] button is pressed again, the power turns
on.
! This unit is equipped with an auto standby function. For details, see
About the auto standby function on page 24.
! Do not disconnect the USB device or turn off this unit’s power while
the USB indicator is lit or flashing. Doing so could delete this unit’s
management data and damage the USB device, making it impossible to read.
2 Pull the disc out, being careful not scratch its signal
surface.
Loading and ejecting discs
! This unit is a one-disc player. Do not insert multiple disc.
! Do not force discs into the disc insertion slot when this unit’s power
is off. Doing so could damage the disc and lead to malfunction of
this unit.
Inserting discs
Insert the disc horizontally into the disc insertion slot,
with the printed surface facing up.
Playback starts after the medium’s information has been read.
! When a disc containing music files recorded with a hierarchical
structure is loaded, playback starts from the tracks in the uppermost
layer.
! If the [DISCh] button is pressed accidentally, press the
[PLAY/PAUSEf] button immediately. Disc ejection is canceled
and the unit is reset to as it was directly before the [DISCh] button
was pressed. (No sound is output during the resetting process.)
CAUTION
When the disc is being drawn in or ejected, do not apply any force to
the disc in the direction opposite its movement. Doing so could damage the disc or this unit.
About the resume function
! When auto cue is turned on, the disc pauses at the audio start position. In this case, press the [PLAY/PAUSEf] to start playback.
For details on auto cue, see Setting auto cue on page 18.
If a disc is ejected while paused then that same disc is reinserted, the
disc pauses at the playback position it was at when it was ejected. This
position is stored in the memory until the unit’s power is turned off or a
different disc is loaded.
! This function does not work with storage devices (USB).
En
21
Connecting and disconnecting USB
devices
Connecting USB devices
Connect the USB device to the USB device insertion slot.
Disconnecting USB devices
1 Press the [USB STOP] button for over 2 seconds, until
the USB indicator turns off.
If the medium contains the rekordbox library
If the USB device connected to this unit contains the rekordbox library
information, the rekordbox library is displayed.
! Music files are displayed in the categories (album, artist, etc.) set
with rekordbox.
Using remotebox
Tracks on USB devices connected to this unit can be browsed and
loaded from mobile devices via wireless LAN.
1 Connect the mobile device by wireless LAN.
2 Launch remotebox on the mobile device and establish
the link.
Do not disconnect the USB device or turn off this unit’s power while the
USB indicator is lit or flashing. Doing so could delete this unit’s management data and damage the USB device, making it impossible to read.
3 Connect the USB device to this unit’s USB device
insertion slot.
2 Disconnect the USB device.
4 Operate remotebox on the mobile device to select the
track.
Playback
5 Operate remotebox on the mobile device to select the
deck on which the track is to be loaded, then tap.
This section describes basic track selection operations and how to
switch the screen.
Playing media connected to or inserted in
this unit
Track loading starts. The jog dial indicator on the deck on which the
track is being loaded flashes.
Once playback is possible, the jog dial indicator stops flashing, remaining lit, the track name is displayed on the main unit display and playback
starts.
! Also see the remotebox operating instructions.
1 Load the medium in this unit.
Outputting sound
2 Press the corresponding medium button ([CD] or
[USB]).
Before outputting sound, check that this unit and the surrounding
devices are properly connected. For instructions on connecting, see
Connecting the input/output terminals on page 10 or Connecting by wireless LAN on page 11.
Set the volume of the power amplifier or powered speakers connected to
the [MASTER OUT 1] and [MASTER OUT 2] terminals to an appropriate
level. Note that loud sound may be output if the volume is set too high.
= Inserting discs (p.21)
= Connecting USB devices (p.22)
The tracks or folders are displayed on a list.
The medium whose contents are displayed on the main unit display can
be switched.
[CD] button: Displays the contents on the inserted disc.
[USB] button: Displays the contents on the connected USB device.
! If tracks are loaded from another medium, a warning message is
displayed. Check the message, then press the rotary selector. The
warning message turns off and the medium is switched.
! If the storage device (USB) contains rekordbox library information,
the rekordbox library is displayed.
! When a link is established with remotebox, the contents of the USB
device are displayed on the mobile device, not on this unit.
3 Turn the rotary selector.
Move the cursor and select the item.
! Press the rotary selector to move to a lower level in the folder. Press
the [BACK] button to return to the level above.
! When the [BACK] button is pressed for over 1 second or the medium
button for the medium being browsed is pressed, the display moves
to the topmost level.
4 Select the track and press the rotary selector.
When the track is loaded, the screen switches to the information display
mode.
The track is loaded, playback starts, and the corresponding medium
button flashes.
! When a track has been loaded while pausing, press the
[PLAY/PAUSEf] button to start playback.
! When auto cue is turned on, the disc pauses at the audio start position. In this case, press the [PLAY/PAUSEf] to start playback.
For details on auto cue, see Setting auto cue on page 18.
To output the sound of channel 1 [CH 1]
To output the sound of [CH 2] (channel 2), replace [CH 1] with [CH 2],
[DECK 1] with [DECK 2] and [PHONO1/LINE1] with [PHONO2/LINE2] in
the procedure below.
1 Switch the [DECK 1, PHONO1/LINE1] selector switch in
the [CH 1] section.
Select the input source for [CH 1] from among the devices connected to
this unit.
—[DECK 1]: Selects the USB device, CD or MIDI.
—[PHONO1/LINE1]: Selects the device connected to the
[PHONO1/LINE1] terminals.
2 Turn the [TRIM] control in the [CH 1] section
clockwise.
Adjusts the audio level input to the [CH 1] terminal.
The [LEVEL] indicator lights when sound is properly being input to
[CH 1].
Adjust the [TRIM] control so that the orange indicator lights where the
track’s volume is highest (at the climax, etc.)
Be careful that the red indicator does not light, or the sound could be
distorted.
3 Move the [CH 1] channel fader to the back side.
The level of the sound output from the [CH 1] terminals is adjusted.
4 Switch [CROSS F. CURVE THRU,
curve selector switch).
,
] (the crossfader
This switches the crossfader curve characteristics.
—[THRU]: Choose this when you do not want to use the crossfader.
22
En
—[ ]: Set here for a curve that rises gradually.
—[ ]: Set here for a curve that rises steeply. (When the crossfader
moves away from either the left or right edge, the sound is immediately output from the opposite side.)
5 Set the crossfader.
Switch the channel whose sound is output from the speakers.
— Left edge: The [CH 1] sound is output.
— Center position: The sound of [CH 1] and [CH 2] is mixed and
output.
— Right edge: The [CH 2] sound is output.
! This operation is not necessary when the [CROSS F. CURVE (THRU,
,
)] selector switch is set to [THRU].
Sound is output from the speakers.
The [LEVEL] indicator lights.
Adjust the [MASTER LEVEL] control so that the orange indicator lights
where the track’s volume is highest (at the climax, etc.).
Be careful that the red indicator does not light, or the sound could be
distorted.
Mixing using the faders
Prepare the unit in advance so that the sound of [CH 1] is being output
from the speakers. For instructions on preparation, see Outputting
sound on page 22.
For instructions on monitoring the sound, see Monitoring sound with
headphones on page 19.
Mixing using the channel faders
1 Set [CROSS F. CURVE THRU, ,
curve selection switch) to [THRU].
] (the crossfader
2 Switch the [DECK 2, PHONO2/LINE2] selector switch in
the [CH 2] section.
3 Turn the [TRIM] control in the [CH 2] section
clockwise.
4 Press the [
(CH2)] button.
The sound of [CH 2] is monitored from the headphones.
5 Turn the [HEADPHONES MIXING] control.
This adjusts the balance of the monitor volume between the sound
output from the [MASTER OUT 1] and [MASTER OUT 2] terminals (the
sound of [CH 1]) and the sound of [CH 2].
6 Operate [DECK 2].
While checking the sound over the headphones, adjust the tempo of
[CH 2] track to match the tempo of [CH 1] track.
7 While moving the [CH 2] channel fader to the back,
move the [CH 1] channel fader to the front.
While checking the sound output from the speakers, operate the channel faders to substitute the sound of [CH 1] with the sound of [CH 2].
Mixing is completed once only the [CH 2] sound is being output from the
speakers.
Using the QUANTIZE function
This function can be used to play auto beat loops, apply beat effects,
etc., in tempo with the currently playing track based on the track’s GRID
information as analyzed with rekordbox.
! Music files must be analyzed ahead of time with rekordbox in order
to use the QUANTIZE function. For instructions on analyzing music
files with rekordbox, see the rekordbox Operating Instructions.
Press the [TIME (AUTO CUE, QUANTIZE)] button while
pressing the [SHIFT] button.
The QUANTIZE function turns on.
When the QUANTIZE function is turned on, the points are automatically
set to the nearest beat position when auto beat loops, beat effects, cues
or hot cues are set.
Furthermore, the auto beat loop, beat effect, hot cue and other functions
can be used without breaking the beat.
! When the [TIME (AUTO CUE, QUANTIZE)] button is pressed again
while pressing the [SHIFT] button, the QUANTIZE function turns off.
Operation
6 Turn the [MASTER LEVEL] control clockwise.
Mixing is completed once only the [CH 2] sound is being output from the
speakers.
Using the SYNC function
This function can be used to automatically synchronize the tempo (BPM)
and beat positions on the left and right decks based on the tracks’ GRID
information as analyzed with rekordbox.
! Music files must be analyzed ahead of time with rekordbox in order
to use the SYNC function. For instructions on analyzing music files
with rekordbox, see the rekordbox Operating Instructions.
! The following describes the procedure for synchronizing the
[DECK 2] track to the [DECK 1] track.
1 Play a track that has been analyzed with rekordbox
on [DECK 1].
The deck on which a track that has been analyzed with rekordbox is
played first is set as the MASTER for the SYNC function.
! The master can also be specified by pressing the [MASTER] button.
2 Play a track that has been analyzed with rekordbox
on [DECK 2].
3 Press the [SYNC] button for [DECK 2].
[DECK 2] is synchronized to the tempo (BPM) and beat positions of the
track playing on [DECK 1].
! When the [SYNC] button is pressed again, the SYNC function turns
off.
! Use the procedure below to restore the currently playing track’s
tempo (BPM) to its original tempo after turning the SYNC function
off.
— First move the [TEMPO] slider to the position to which the tempo
(BPM) was synchronized (the [TEMPO] indicator turns off), then
move it back to the center position.
— Reload the same track.
! Depending on the track’s beat information, the sound may not be
synchronized after the [SYNC] button is pressed. If this happens, the
sound can be re-synchronized by pressing the [SYNC] button to turn
the sync mode off then back on.
Mixing using the crossfader
1 Set [CROSS F. CURVE THRU, , ] (the crossfader
curve selector switch) to [ ] or [ ].
2 Operate [CH 2].
Perform steps 2 to 6 at Mixing using the channel faders above.
3 Move the crossfader gradually to the right.
While checking the sound output from the speakers, operate the crossfader to substitute the sound of [CH 1] with the sound of [CH 2].
En
23
Changing the settings
1 Press the [INFO(UTILITY)] button for over 1 second.
The [UTILITY] screen is displayed.
2 Use the rotary selector to change the setting.
! When the [BACK (TOP)] button is pressed, the previous screen
reappears.
3 Press the rotary selector.
The changed settings are stored.
! To close the [UTILITY] screen, press the [INFO(UTILITY)] button.
About the auto standby function
When the auto standby function is turned on, the power is automatically
set to the standby mode after the set time has passed with all of the
conditions below met.
— That none of this unit’s buttons or controls are operated.
— That this unit’s channel level indicator is not lit.
— That the playback function is not operating.
— That no computer is connected to the USB terminal (Type B terminal)
on this unit’s rear panel.
— That remotebox is not connected to this unit.
— That the demo mode is turned off.
Setting preferences
Options settings
Selection items
Descriptions
WLAN INFO
—
For details, see List of WLAN INFORMATION items below.
WLAN SETTING
—
For details, see List of WLAN SETTING items on page 25.
MIXER MODE
XDJ-R1*/PC
For details, see Changing the [MIXER MODE] on page 27.
A. CUE LEVEL
–36 dB/–42 dB/–48 dB/–54 dB/–60 dB*/–66 dB/–72 dB/–78 dB
Sets the auto cue level. For instructions on setting, see Changing the
auto cue level on page 18.
SAMPLE LEVEL
1 – 50* – 100
Adjusts the volume of the sampled sound sources.
CROSS FADER START
ON/OFF*
Playback starts from the cue point when the crossfader is moved.
TOUCH SENSE LEVEL(DECK1)
–4 – 0* – +4
Adjusts the sensitivity of the [DECK 1] jog dial.
TOUCH SENSE LEVEL(DECK2)
–4 – 0* – +4
Adjusts the sensitivity of the [DECK 2] jog dial.
BACK UP
SAVE/LOAD
Loads the disc’s hot cue information stored in this unit.
AUTO STANDBY
OFF/20 min*/40 min/60 min
Set the time until the standby mode is set.
For details, see About the auto standby function above.
DEMO MODE
ON/OFF*
Turns the demo mode on and off.
VERSION No.
—
Displays this unit’s software version.
*: Setting upon purchase
List of WLAN INFORMATION items
When [MODE] at [WLAN SETTING] is set to [OFF], only [MODE] and [MAC ADDRESS] are displayed.
Item
24
MODE
Displays the operation mode of this unit’s wireless LAN function.
SSID
Displays this unit’s [SSID].
SECURITY
Displays the currently set security (encryption) type.
PASSWORD
Displays the currently set password.
IP ADDRESS
192.168.2.3 is displayed.
SUBNET MASK
255.255.255.0 is displayed.
CONNECTED CLIENTS
Displays the MAC addresses of clients connected by WLAN.
MAC ADDRESS
Displays this unit’s MAC address.
En
List of WLAN SETTING items
When [MODE] at [WLAN SETTING] is set to [OFF], only [MODE] and [RESET TO DEFAULT] are displayed.
Setting item 1
Setting item 2
Setting ranges
Description
MODE
—
ENABLE*/DISABLE
Used to set this unit’s operation mode.
NETWORK SETTING
A to Z, a to z, 0 to 9, symbols (max. 32 characters)
Used to set this unit’s [SSID].
OPEN / WEP64 / WEP128*
Used to set this unit’s security (encryption) type.
PASSWORD
A to Z, a to z, 0 to 9, symbols (5 characters for
[WEP64], 13 characters for [WEP128])
Used to set this unit’s password.
CHANNEL NO.
CH1 – 11, AUTO*
This unit uses the 2.4 GHz band. If there is a wireless LAN network on the
same band in the area and the waves cause interference, making connections and communications instable, try changing the channel manually.
(By default, this is set to [AUTO] and a relatively free channel is selected
automatically.)
DHCP SERVER
ENABLE*/DISABLE
Used to set whether or not to enable this unit’s DHCP server function.
[ENABLE]: Enables the DHCP server function.
[DISABLE]: Disables the DHCP server function.
—
YES/NO
Resets the settings at [WLAN SETTING] to the factory defaults.
OTHERS
RESET TO DEFAULT
Changing the settings
SSID
SECURITY
*: Setting upon purchase
En
25
Using the DJ software
About the driver software
(Windows)
Connecting this unit and computer
This driver software is an exclusive ASIO driver for outputting audio
signals from the computer.
! There is no need to install the driver software when using Mac OS X.
For instructions on connections, see Connecting the input/output terminals on page 10.
Operating environment
Supported operating systems
Windows® 8/Windows® 8 Pro
32-bit version
1
64-bit version
1
32-bit version
1
64-bit version
1
Windows Vista® Home Basic/Home Premium/
Business/Ultimate
32-bit version
1
64-bit version
1
Windows® XP Home Edition/Professional (SP2 or later)
32-bit version
1
Windows® 7 Home Premium/Professional/Ultimate
1
1 Connect this unit to your computer via a USB cable.
2 Press the [STANDBY/ON] button.
Turn on the power of this unit.
! The message [Installing device driver software] may appear when
this unit is first connected to the computer or when it is connected to
a different USB port on the computer. Wait a while until the message
[Your devices are ready for use] appears.
1
Adjusting the buffer size
1
1 When using a 64-bit version of Windows, the driver software can only be used for
32-bit applications.
Before installing the driver software
! First read the Software end user license agreement on page 6
carefully.
! Turn off this unit’s power switch, then disconnect the USB cable
connecting this unit and the computer.
! If any other programs are running on the computer, quit them.
! To install or uninstall the driver software, you need to be authorized
by the administrator of your computer. Log on as the administrator of
your computer before proceeding with the installation.
! If you connect this unit to your computer without installing the driver
software first, an error may occur on your computer depending on
the system environment.
! If installation of the driver software is interrupted after it has started,
start the installation procedure over again from the beginning.
This unit functions as an audio device conforming to the ASIO
standards.
! If an application using this unit as the default audio device (DJ
software, etc.) is running, quit that application before adjusting the
buffer size.
Click the Windows [Start] menu>[All Programs]
>[Pioneer]>[XDJ_R1]>[XDJ_R1 ASIO Settings Utility].
! For Windows 8, click [XDJ_R1 ASIO Settings Utility] from the
[Start] menu.
Installing the driver software
1 Turn on the computer’s power.
2 Insert the included CD-ROM into the computer’s CD
drive.
3 When the CD-ROM menu appears, select [Install
Driver Software (Pioneer_XDJ_R1_Driver_X.XXX)], then
click [Start].
4 Proceed with installation according to the instructions
on the screen.
If [Windows Security] appears on the screen while the installation is
in progress, click [Install this driver software anyway] and continue
with the installation.
! When installing on Windows XP
If [Hardware Installation] appears on the screen while the installation is in progress, click [Continue Anyway] and continue with the
installation.
! When the installation program is completed, a completion message
appears.
! If the buffer size is made large, drops in audio data (breaks in the
sound) occur less easily, but the time lag due to the delay in the
transfer of the audio data (latency) increases.
! If the kernel buffer number is made large, breaks in the sound occur
less easily, but the time lag due to latency increases.
! Operate referring to the procedure below to adjust the buffer size and
kernel buffer.
If there are no interruptions in the sound with the
default settings
1 Gradually decrease the buffer size, setting it to the minimum
value at which there are no interruptions in the sound.
2 Set the kernel buffer size to [2] and check whether there are interruptions in the sound.
— If there are interruptions in the sound, set the kernel buffer size to
[3].
If there are interruptions in the sound with the default
settings
1 Set the kernel buffer size to [4], then set the buffer size to the
minimum value at which there are no interruptions in the sound.
26
En
Checking the version of the driver
software
Click the Windows [Start] menu>[All Programs]
>[Pioneer]>[XDJ_R1]>[XDJ_R1 Version Display Utility].
! For Windows 8, click [XDJ_R1 Version Display Utility] from the
[Start] menu.
Changing the [MIXER MODE]
There are two types of DJ software mixing modes, one for mixing using
an external mixer and one for mixing within the DJ software. On this unit,
either mixing mode can be used by changing the [MIXER MODE] setting
on the [UTILITY] screen.
1 Press the [INFO(UTILITY)] button for over 1 second.
The [UTILITY] screen is displayed.
2 Turn the rotary selector, select [MIXER MODE], then
press the rotary selector.
3 Turn the rotary selector, select the mode you want to
set, then press the rotary selector.
! You can check the firmware version of this unit on the screen.
! The firmware version is not displayed when this unit is not connected
to the computer or when this unit and computer are not properly
communicating.
Checking the latest information on the
driver software
For the latest information on the driver software for exclusive use with
this unit, visit our website shown below.
http://pioneerdj.com/support/
Using the DJ software
This unit also outputs the information concerning VIRTUAL DJ LE operations as well as operations of the buttons and controls in universal MIDI
format. When a computer on which a MIDI-compatible DJ software
program is installed is connected using a USB cable, the DJ software
can be operated from this unit. The sound of music files being played on
the computer can also be output from this unit.
To use this unit as an audio device, install the driver software on the
computer beforehand (page 26). This unit must also be selected in the
DJ software’s audio output device settings. For details, see your DJ
software’s operating instructions.
Using VIRTUAL DJ LE
About the VIRTUAL DJ LE software
Using the DJ software
—[XDJ-R1]: The sound is mixed using this unit’s mixer section. The
DJ software can be operated using this unit’s player section.
—[PC]: The sound is mixed within the DJ software.
Set the DJ software’s audio output settings as described below.
PIONEER XDJ-R1MASTER/CH1 L
PIONEER XDJ-R1MASTER/CH1 R
PIONEER XDJ-R1PHONES/CH2 L
PIONEER XDJ-R1PHONES/CH2 R
! To close the [UTILITY] screen, press the [INFO(UTILITY)] button.
VIRTUAL DJ LE is a DJ software application by Atomix productions. DJ
performances are possible by connecting the computer on which this
software is installed to this unit.
Installing the VIRTUAL DJ LE software
The VIRTUAL DJ LE software must be downloaded from the Atomix
productions website.
For instructions on launching VIRTUAL DJ LE and the table of supported
functions, please visit the following website:
http://pioneerdj.com/support/
For the latest information on the operating environment and compatibility, and to acquire the latest operating system, please visit the following
Atomix productions website:
http://www.virtualdj.com/
Note on using an Internet connection
! A separate contract with and payment to a provider offering Internet
services is required.
1 Connect the USB port on this unit to your computer.
For instructions on connections, see Connecting the input/output terminals on page 10.
2 Press the [
MIDI] button.
[MIDI CONTROL] appears on the main unit display.
! If tracks are loaded from another medium, a warning message is
displayed. Check the message, then press the rotary selector. The
warning message turns off and the medium is switched.
3 Launch the DJ software.
Communication with the DJ software starts.
The DJ software can be operated using this unit’s buttons and controls.
! It may not be possible to use some buttons to operate the DJ
software.
! For messages output by this unit, see List of MIDI Messages on page
28.
En
27
List of MIDI Messages
Of the three bytes of MIDI messages, the first and third bytes are expressed in hexadecimal, the second byte in decimal.
MIDI channel
MIDI ch. Value
Deck A
1
n=0
Deck B
2
n=1
Deck C
3
n=2
Deck D
4
n=3
Effect A/C
5
n=4
Effect B/D
6
n=5
Mixer
7
n=6
1 Player
MIDI message (this unit to computer)
SW Name
When SHIFT button
is off
Rotary selector (SELECT PUSH) (turn)
64
dd
Bn
65
dd
Remarks (dd values)
Difference count value from when previously operated
! Turn clockwise: 1 – (max) 30
! Turn counterclockwise: 127 – (min) 98
Rotary selector (SELECT PUSH) (press)
9n
66
dd
9n
67
dd
OFF=0, ON=127
BACK button
9n
68
dd
9n
69
dd
OFF=0, ON=127
TIME (AUTO CUE,QUANTIZE) button
9n
62
dd
9n
63
dd
OFF=0, ON=127
PLAY/PAUSE button
9n
11
dd
9n
71
dd
OFF=0, ON=127
CUE button
9n
12
dd
9n
72
dd
OFF=0, ON=127
TRACK SEARCH p button
9n
9
dd
9n
74
dd
OFF=0, ON=127
TRACK SEARCH obutton
9n
10
dd
9n
75
dd
OFF=0, ON=127
XDJ-R1
AUTO BEAT
LOOP control
(turn)
From
remotebox
Bn
19
dd
32 beats
9n
110
dd
16 beats
9n
111
dd
8 beats
9n
112
dd
4 beats
9n
113
dd
2 beats
9n
114
dd
1 beat
9n
115
dd
1/2 beat
9n
116
dd
1/4 beat
9n
117
dd
1/8 beat
9n
118
dd
1/16 beat
9n
119
dd
1/32 beat
9n
120
dd
Bn
79
dd
Difference count value from when previously operated
! Turn clockwise: 1 – (max) 30
! Turn counterclockwise: 127 – (min) 98
—
—
—
OFF=0, ON=127
AUTO BEAT LOOP control (press)
9n
20
dd
9n
80
dd
OFF=0, ON=127
MODE (HOT CUE/4-BEAT SAMPLER) button
9n
59
dd
9n
60
dd
OFF=0, ON=127
CALL button
9n
25
dd
9n
85
dd
OFF=0, ON=127
HOT CUE/DELETE A button
9n
46
dd
9n
95
dd
OFF=0, ON=127
HOT CUE/DELETE B button
9n
47
dd
9n
96
dd
OFF=0, ON=127
HOT CUE/DELETE C button
9n
48
dd
9n
97
dd
OFF=0, ON=127
4-BEAT SAMPLER A button
9n
50
dd
9n
99
dd
OFF=0, ON=127
4-BEAT SAMPLER B button
9n
51
dd
9n
100
dd
OFF=0, ON=127
OFF=0, ON=127
4-BEAT SAMPLER C button
9n
52
dd
9n
101
dd
VINYL MODE button
9n
21
dd
9n
22
dd
OFF=0, ON=127
MASTER TEMPO button
9n
26
dd
9n
86
dd
OFF=0, ON=127
9n
87
dd
OFF=0, ON=127
0–16383
0 at – side, 16383 at + side
TEMPO RANGE
button
6%
9n
14
dd
10 %
9n
15
dd
16 %
9n
16
dd
WIDE
TEMPO slider
28
Bn
When SHIFT button
is on
9n
17
dd
Bn
0
MSB
Bn
5
MSB
Bn
32
LSB
Bn
37
LSB
SYNC button
9n
88
dd
9n
92
dd
OFF=0, ON=127
MASTER button
9n
89
dd
9n
93
dd
OFF=0, ON=127
En
MIDI message (this unit to computer)
SW Name
When SHIFT button
is off
Jog dial (when outer section turned)
Bn
1
dd
Remarks (dd values)
When SHIFT button
is on
Bn
6
dd
Difference count from previous operation
! Increases from 64 when turned clockwise,
decreases from 64 when turned counterclockwise.
The cumulative differential count when the jog dial
is turned one rotation is 600.
Jog dial (when top section turned)
Bn
2
dd
Bn
7
dd
Difference count from previous operation
! Increases from 64 when turned clockwise,
decreases from 64 when turned counterclockwise.
The cumulative differential count when the jog dial
is turned one rotation is 600.
Jog dial (when top section pressed)
9n
54
dd
9n
103
dd
OFF=0, ON=127
MIDI message (computer to this unit)
Names of switches and indicators
When SHIFT button
is off
When SHIFT button
is on
Remarks (dd values)
90
62
dd
—
—
—
[DeckA] displayed in the [DECK 1] information display section: 127
Deck DdB
91
62
dd
—
—
—
[DeckB] displayed in the [DECK 2] information display section: 127
Deck AdC
92
62
dd
—
—
—
[DeckC] displayed in the [DECK 1] information display section: 127
Deck BdD
93
62
dd
—
—
—
[DeckD] displayed in the [DECK 2] information display section: 127
Deck switching
PLAY/PAUSE button
9n
11
dd
9n
71
dd
Off = 0, lit = 127
CUE button
9n
12
dd
9n
72
dd
Off = 0, lit = 127
TRACK SEARCH p button
9n
9
dd
9n
74
dd
OFF=0, ON=127
TRACK SEARCH obutton
9n
10
dd
9n
75
dd
OFF=0, ON=127
9n
21
dd
9n
22
dd
Off = 0, lit = 127
9n
110
dd
9n
79
dd
OFF=0, ON=127
9n
80
dd
Off = 0, lit = 127
dd
HOT CUE indicator off and 4-BEAT
SAMPLER indicator lit = 0
HOT CUE indicator lit and 4-BEAT
SAMPLER indicator off = 127
VINYL MODE button
32 beats
AUTO BEAT LOOP control
(turn)
16 beats
9n
111
dd
8 beats
9n
112
dd
4 beats
9n
113
dd
2 beats
9n
114
dd
1 beat
9n
115
dd
1/2 beat
9n
116
dd
1/4 beat
9n
117
dd
1/8 beat
9n
118
dd
1/16 beat
9n
119
dd
1/32 beat
9n
120
dd
9n
20
dd
AUTO BEAT LOOP indicator
HOT CUE/4-BEAT SAMPLER indicator
9n
59
dd
9n
60
MASTER TEMPO button
9n
26
dd
9n
86
dd
Off = 0, lit = 127
TEMPOa indicator
9n
28
dd
—
—
—
Off = 0, lit = 127
—
—
—
Off = 0, lit = 127
9n
87
dd
OFF=0, ON=127
Bn
5
dd
0-127
0 at – side, 127 at + side
TEMPOb indicator
6%
TEMPO RANGE button
9n
29
dd
9n
14
dd
10 %
9n
15
dd
16 %
9n
16
dd
WIDE
9n
17
dd
Bn
0
dd
TEMPO slider
MASTER button
9n
89
dd
9n
93
dd
Off = 0, lit = 127
SYNC button
9n
88
dd
9n
92
dd
Off = 0, lit = 127
CALL button
9n
25
dd
9n
85
dd
Off = 0, lit = 127
HOT CUE/DELETE A button
9n
46
dd
9n
95
dd
Off = 0, lit = 127
HOT CUE/DELETE B button
9n
47
dd
9n
96
dd
Off = 0, lit = 127
HOT CUE/DELETE C button
9n
48
dd
9n
97
dd
Off = 0, lit = 127
4-BEAT SAMPLER A button
9n
50
dd
9n
99
dd
Off = 0, lit = 127
4-BEAT SAMPLER B button
9n
51
dd
9n
100
dd
Off = 0, lit = 127
4-BEAT SAMPLER C button
9n
52
dd
9n
101
dd
Off = 0, lit = 127
Jog dial illumination (4-point lighting)
9n
55
dd
9n
56
dd
Off = 0, lit = 127
En
Using the DJ software
Deck CdA
29
2 Mixer
MIDI message (this unit to computer)
SW Name
When SHIFT button
is off
When SHIFT button
is on
MASTER LEVEL control
B6
B6
0
32
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
MIC LEVEL control
B6
B6
20
52
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
MIC EQ control
B6
B6
22
54
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
AUX LEVEL control
B6
B6
24
56
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
BOOTH MONITOR control
B6
B6
26
58
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck A
B6
B6
3
35
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck B
B6
B6
4
36
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck C
B6
B6
5
37
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck D
B6
B6
6
38
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
HEAD PHONES MIXING control
B6
B6
1
33
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
HEAD PHONES LEVEL control
B6
B6
2
34
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck A
B6
B6
7
39
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck B
B6
B6
8
40
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck C
B6
B6
9
41
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck D
B6
B6
10
42
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck A
B6
B6
11
43
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck B
B6
B6
12
44
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck C
B6
B6
13
45
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck D
B6
B6
14
46
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck A
B6
B6
15
47
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck B
B6
B6
16
48
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck C
B6
B6
17
49
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck D
B6
B6
18
50
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
TRIM control
EQ [HI] control
EQ [MID] control
EQ [LOW] control
30
Remarks (dd values)
En
MIDI message (this unit to computer)
SW Name
When SHIFT button
is off
Deck A
B6
B6
27
59
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck B
B6
B6
28
60
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck C
B6
B6
29
61
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck D
B6
B6
30
62
MSB
LSB
—
—
—
—
—
—
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
COLOR control
HEADPHONES CUE button
Remarks (dd values)
When SHIFT button
is on
Deck A
96
84
dd
96
96
dd
OFF=0, ON=127
Deck B
96
85
dd
96
97
dd
OFF=0, ON=127
96
86
dd
96
98
dd
OFF=0, ON=127
96
87
dd
96
99
dd
OFF=0, ON=127
Deck A
B6
B6
19
51
MSB
LSB
—
—
—
—
—
—
0–16383
Lower edge: 0 / Upper edge: 16383
Deck B
B6
B6
21
53
MSB
LSB
—
—
—
—
—
—
0–16383
Lower edge: 0 / Upper edge: 16383
Deck C
B6
B6
23
55
MSB
LSB
—
—
—
—
—
—
0–16383
Lower edge: 0 / Upper edge: 16383
Deck D
B6
B6
25
57
MSB
LSB
—
—
—
—
—
—
0–16383
Lower edge: 0 / Upper edge: 16383
B6
B6
31
63
MSB
LSB
—
—
—
—
—
—
0–16383
Left edge: 0 / Right edge: 16383
96
65
dd
—
—
—
OFF=0, ON=127
96
66
dd
—
—
—
OFF=0, ON=127
96
67
dd
—
—
—
OFF=0, ON=127
Channel fader
Crossfader
THRU
Crossfader curve selector
switch
MIC (ON/OFF)button
96
70
dd
96
102
dd
OFF=0, ON=127
AUX (ON/OFF) button
96
75
dd
96
103
dd
OFF=0, ON=127
DECK, PHONO/LINE selector switch
DECK 1
96
79
dd
—
—
—
OFF=0, ON=127
PHONO1/LINE1
96
80
dd
—
—
—
OFF=0, ON=127
DECK 2
96
81
dd
—
—
—
OFF=0, ON=127
PHONO2/LINE2
96
82
dd
—
—
—
OFF=0, ON=127
Using the DJ software
Deck C
Deck D
MIDI message (computer to this unit)
Names of switches and indicators
When SHIFT button
is off
When SHIFT button
is on
Remarks (dd values)
MASTER LEVEL control
B6
0
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
AUX LEVEL control
B6
24
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
BOOTH MONITOR control
B6
26
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
MIC LEVEL control
B6
20
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
MIC EQ control
B6
22
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck A
B6
3
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck B
B6
4
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck C
B6
5
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck D
B6
6
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
TRIM control
En
31
MIDI message (computer to this unit)
Names of switches and indicators
When SHIFT button
is off
Deck A
B6
7
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck B
B6
8
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck C
B6
9
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck D
B6
10
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck A
B6
11
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck B
B6
12
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck C
B6
13
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck D
B6
14
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck A
B6
15
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck B
B6
16
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck C
B6
17
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck D
B6
18
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck A
B6
27
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck B
B6
28
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck C
B6
29
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck D
B6
30
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
EQ [HI] control
EQ [MID] control
EQ [LOW] control
COLOR control
HEADPHONES CUE button
Deck A
96
84
dd
96
96
dd
Off = 0, lit = 127
Deck B
96
85
dd
96
97
dd
Off = 0, lit = 127
Deck C
96
86
dd
96
98
dd
Off = 0, lit = 127
Deck D
96
87
dd
96
99
dd
Off = 0, lit = 127
HEAD PHONES MIXING control
B6
1
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
HEAD PHONES LEVEL control
B6
2
dd
—
—
—
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck A
B6
19
dd
—
—
—
0-127
Lower edge: 0 / Upper edge: 127
Deck B
B6
21
dd
—
—
—
0-127
Lower edge: 0 / Upper edge: 127
Deck C
B6
23
dd
—
—
—
0-127
Lower edge: 0 / Upper edge: 127
Deck D
B6
25
dd
—
—
—
0-127
Lower edge: 0 / Upper edge: 127
B6
31
dd
—
—
—
0-127
Left edge: 0 / Right edge: 127
Channel fader
Crossfader
32
Remarks (dd values)
When SHIFT button
is on
MIC (ON/OFF)button
96
70
dd
96
102
dd
Off = 0, lit = 127
AUX (ON/OFF) button
96
75
dd
96
103
dd
Off = 0, lit = 127
En
MIDI message (computer to this unit)
Names of switches and indicators
Channel level meter
When SHIFT button
is off
Remarks (dd values)
When SHIFT button
is on
Deck A
B6
71
dd
—
—
—
0-127
Deck B
B6
72
dd
—
—
—
0-127
Deck C
B6
73
dd
—
—
—
0-127
Deck D
B6
74
dd
—
—
—
0-127
3 Effects
MIDI message (this unit to computer)
SW Name
When SHIFT button
is off
B4
0
dd
B4
16
dd
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck B
B5
0
dd
B5
16
dd
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck C
B4
8
dd
B4
24
dd
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
Deck D
B5
8
dd
B5
24
dd
0-127
When turned fully counterclockwise: 0 / When turned fully
clockwise: 127
FX SELECT button
(FLANGER)
FX SELECT button (ECHO)
FX SELECT button (ROLL)
Deck A
94
70
dd
94
98
dd
OFF=0, ON=127
Deck B
95
70
dd
95
98
dd
OFF=0, ON=127
Deck C
94
74
dd
94
102
dd
OFF=0, ON=127
Deck D
95
74
dd
95
102
dd
OFF=0, ON=127
Deck A
94
71
dd
94
99
dd
OFF=0, ON=127
Deck B
95
71
dd
95
99
dd
OFF=0, ON=127
OFF=0, ON=127
Deck C
94
75
dd
94
103
dd
Deck D
95
75
dd
95
103
dd
OFF=0, ON=127
Deck A
94
72
dd
94
100
dd
OFF=0, ON=127
Deck B
95
72
dd
95
100
dd
OFF=0, ON=127
Deck C
94
76
dd
94
104
dd
OFF=0, ON=127
Deck D
95
76
dd
95
104
dd
OFF=0, ON=127
Deck A
94
73
dd
94
101
dd
OFF=0, ON=127
Deck B
95
73
dd
95
101
dd
OFF=0, ON=127
Deck C
94
77
dd
94
105
dd
OFF=0, ON=127
Deck D
95
77
dd
95
105
dd
OFF=0, ON=127
Deck A
B4
B4
2
34
MSB
LSB
B4
B4
18
50
MSB
LSB
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck B
B5
B5
2
34
MSB
LSB
B5
B5
18
50
MSB
LSB
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck C
B4
B4
10
42
MSB
LSB
B4
B4
26
58
MSB
LSB
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
Deck D
B5
B5
10
42
MSB
LSB
B5
B5
26
58
MSB
LSB
0–16383
When turned fully counterclockwise: 0 / When turned fully
clockwise: 16383
LEVEL/DEPTH control
TAP button
SOUND COLOR FX buttons
Deck A
94
88
dd
94
116
dd
OFF=0, ON=127
Deck B
95
88
dd
95
116
dd
OFF=0, ON=127
Deck C
94
89
dd
94
117
dd
OFF=0, ON=127
Deck D
95
89
dd
95
117
dd
OFF=0, ON=127
FILTER
94
78
dd
94
106
dd
OFF=0, ON=127
PITCH
94
79
dd
94
107
dd
OFF=0, ON=127
CRASH
94
80
dd
94
108
dd
OFF=0, ON=127
NOISE
94
81
dd
94
109
dd
OFF=0, ON=127
En
Using the DJ software
Deck A
BEAT control
FX SELECT button (TRANS)
Remarks (dd values)
When SHIFT button
is on
33
MIDI message (computer to this unit)
Names of switches and
indicators
When SHIFT button
is off
Deck A
B4
0
dd
B4
16
dd
0-127
When turned fully counterclockwise: 0 / When turned fully clockwise:
127
Deck B
B5
0
dd
B5
16
dd
0-127
When turned fully counterclockwise: 0 / When turned fully clockwise:
127
Deck C
B4
8
dd
B4
24
dd
0-127
When turned fully counterclockwise: 0 / When turned fully clockwise:
127
Deck D
B5
8
dd
B5
24
dd
0-127
When turned fully counterclockwise: 0 / When turned fully clockwise:
127
BEAT control
FX SELECT button
(TRANS)
FX SELECT button
(FLANGER)
FX SELECT button
(ECHO)
FX SELECT button (ROLL)
TAP button
Deck A
94
70
dd
94
98
dd
Off = 0, lit = 127
Deck B
95
70
dd
95
98
dd
Off = 0, lit = 127
Deck C
94
74
dd
94
102
dd
Off = 0, lit = 127
Deck D
95
74
dd
95
102
dd
Off = 0, lit = 127
Deck A
94
71
dd
94
99
dd
Off = 0, lit = 127
Deck B
95
71
dd
95
99
dd
Off = 0, lit = 127
Off = 0, lit = 127
Deck C
94
75
dd
94
103
dd
Deck D
95
75
dd
95
103
dd
Off = 0, lit = 127
Deck A
94
72
dd
94
100
dd
Off = 0, lit = 127
Deck B
95
72
dd
95
100
dd
Off = 0, lit = 127
Deck C
94
76
dd
94
104
dd
Off = 0, lit = 127
Deck D
95
76
dd
95
104
dd
Off = 0, lit = 127
Deck A
94
73
dd
94
101
dd
Off = 0, lit = 127
Deck B
95
73
dd
95
101
dd
Off = 0, lit = 127
Deck C
94
77
dd
94
105
dd
Off = 0, lit = 127
Deck D
95
77
dd
95
105
dd
Off = 0, lit = 127
Deck A
94
88
dd
94
116
dd
Off = 0, lit = 127
Deck B
95
88
dd
95
116
dd
Off = 0, lit = 127
Deck C
94
89
dd
94
117
dd
Off = 0, lit = 127
Deck D
95
89
dd
95
117
dd
Off = 0, lit = 127
Deck A
B4
2
dd
B4
18
dd
0-127
When turned fully counterclockwise: 0 / When turned fully clockwise:
127
Deck B
B5
2
dd
B5
18
dd
0-127
When turned fully counterclockwise: 0 / When turned fully clockwise:
127
Deck C
B4
10
dd
B4
26
dd
0-127
When turned fully counterclockwise: 0 / When turned fully clockwise:
127
Deck D
B5
10
dd
B5
26
dd
0-127
When turned fully counterclockwise: 0 / When turned fully clockwise:
127
LEVEL/DEPTH control
SOUND COLOR FX
buttons
Remarks (dd values)
When SHIFT button
is on
FILTER
94
78
dd
94
106
dd
Off = 0, lit = 127
PITCH
94
79
dd
94
107
dd
Off = 0, lit = 127
CRASH
94
80
dd
94
108
dd
Off = 0, lit = 127
NOISE
94
81
dd
94
109
dd
Off = 0, lit = 127
4 Others (when remotebox connected)
Names of switches and indicators (remotebox)
Deck switching
Needle search pad
34
En
MIDI message (this unit to computer)
Remarks (dd values)
Deck CdA
90
90
dd
OFF=0, ON=127
Deck DdB
91
90
dd
OFF=0, ON=127
Deck AdC
92
90
dd
OFF=0, ON=127
Deck BdD
93
90
dd
OFF=0, ON=127
Bn
105
dd
0-127
0 at left edge, 127 at right edge
Additional information
Troubleshooting
! Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points
below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble
cannot be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
! This unit may not operate properly due to static electricity or other external influences. In this case, proper operation may be restored by turning the
power off, waiting 1 minute, then turning the power back on.
Power supply
Check
Remedy
The power is not turned on.
None of the indicators light.
Is the power cord properly connected?
Plug in the power cord to an AC outlet. (page 10)
Is the [STANDBY/ON] button for power supply
set to [ON]?
Set the [STANDBY/ON] button for power supply to [ON]. (page 21)
The [STANDBY/ON] indicator flashes
and the power does not turn on.
—
Normal operation can sometimes be restored by unplugging the power cord,
waiting at least 1 minute, then plugging the power cord back in. If the symptom
persists, unplug the power cord and request repairs.
Problem
Check
Remedy
No sound or small sound.
Are the [DECK 1, PHONO1/LINE1] and [DECK 2,
PHONO2/LINE2] selector switches set to the
proper positions?
Switch the channel’s input source using the [DECK 1, PHONO1/LINE1] and
[DECK 2, PHONO2/LINE2] selector switches. (Page 22)
Are the [TRIM] control, channel faders, crossfader
and [MASTER LEVEL] control set to the proper
positions?
Set the [TRIM] control, channel faders, crossfader and [MASTER LEVEL] control
to the proper positions. (Page 22)
Is the [LINE, PHONO] selector switch on this
unit’s rear panel properly set?
Properly set the [LINE, PHONO] selector switch on this unit’s rear panel according to the connected device. (page 10)
Is the [MASTER LEVEL] control set to the proper
position?
Adjust [MASTER LEVEL] so that the orange indicator on the master level indicator lights at the peak level. (Page 22)
Is the [TRIM] control set to the proper position?
Adjust [TRIM] so that the orange indicator on the channel level indicator lights
at the peak level. (Page 22)
Is the [LINE, PHONO] selector switch on this
unit’s rear panel properly set?
Properly set the [LINE, PHONO] selector switch on this unit’s rear panel according to the connected device. (page 10)
Is the sound level input to the [MIC] terminal set to
an appropriate level?
Set the [MIC LEVEL] control to the proper position. (page 19)
Is the sound level input to the [AUX IN] terminal
set to an appropriate level?
Set the [AUX LEVEL] control to the proper position. (page 19)
No sound is produced, or sound is
distorted or noisy.
Is this unit placed near a TV?
Turn the TV’s power off or install this unit and TV away from each other.
Microphone sound is not output or
volume is low.
Is the [MIC LEVEL] control set to the proper
position?
Set the [MIC LEVEL] control to the proper position. (page 19)
Is the switch on this unit or the microphone
turned off?
Turn the switch on.
Have you connected an analog player with a builtin phono equalizer?
For analog players with built-in phono equalizers, use with the [LINE, PHONO]
selector switch on this unit’s rear panel switched to [LINE]. (page 10)
Audio output
Distorted sound.
Sound is distorted when an analog
player is connected to this unit’s
[PHONO/LINE] terminals.
Or, lighting of the channel level
indicator does not change even when
the [TRIM] control is turned.
Additional information
Problem
If the analog player with built-in phono equalizer has a PHONO/LINE selector
switch, switch it to PHONO.
Is an audio interface for computers connected
between the analog player and this unit?
If the output of the audio interface for computers is line level, use with the [LINE,
PHONO] selector switch on this unit’s rear panel switched to [LINE]. (page 10)
If the analog player has a PHONO/LINE selector switch, switch it to PHONO.
Display
Problem
Check
Remedy
The playing address display is not
—
displayed in the remaining time mode.
When playing files recorded in VBR, it may happen that the set cannot detect the
length of the track immediately and that some time is required for the playing
address display to appear.
The category is not displayed.
Is the rekordbox library information stored on the
USB device?
Use a device onto which the library information has been exported from
rekordbox.
Is the USB device write-protected?
Cancel the USB device’s write-protection so that this unit can write on it.
Is the auto standby function activated?
This unit is shipped with the auto standby function turned on. If you do not want
to use the auto standby function, set [AUTO STANDBY] to [OFF]. (page 24)
Nothing is displayed.
En
35
Functions and operations
Problem
Check
Remedy
Can’t crossfade.
,
)] (crossIs the [CROSS F. CURVE (THRU,
fader curve selector) switch set to [THRU]?
Set the [CROSS F. CURVE (THRU,
,
)] (crossfader curve selector) switch
to a position other than [THRU]. (Page 22)
Back cue function does not work.
Is a cue point set?
Set a cue point. (page 15)
Beat effect does not work.
Is one of the [BEAT FX] buttons (TRANS, FLANGER,
ECHO or ROLL) pressed?
Press one of the [BEAT FX] buttons (TRANS, FLANGER, ECHO or ROLL). (page
20)
Is the [LEVEL/DEPTH] control set to the center
position?
Turn the [LEVEL/DEPTH] control clockwise or counterclockwise. (page 20)
Is the [BEAT] control set to the proper position?
Set the [BEAT] control to the proper position. (page 20)
Color effect does not work.
Is a
Press one of the [SOUND COLOR FX (NOISE, PITCH, CRUSH, FILTER)] buttons.
[SOUND COLOR FX (NOISE, PITCH, CRUSH, FILTER)] (page 20)
button pressed?
Is the [COLOR] control set to the proper position?
Set the [COLOR] control to the proper position. (page 20)
[SYNC] function does not work.
Has the music file been analyzed?
Analyze the file. (page 23)
[SYNC] function does not work even
when files are analyzed.
Is the beat grid irregular?
Is the beat grid properly tapped?
Set the beat grid properly. (page 23)
Are the BPMs of the tracks in the two decks too
different?
The [SYNC] function will not work properly if the BPM of the track on the deck
for which the [SYNC] button is pressed is outside the adjustable tempo range of
the track on the deck for which the [SYNC] button is not pressed.
Are you scratching?
The [SYNC] function is disabled when scratching.
Has the power been turned off directly after changing the setting?
After changing settings, wait at least 10 seconds before turning the power off.
After editing (recording or deleting) a sampled sound source, be sure to press
the [STANDBY/ON] button to turn the power off.
Settings are not stored in the
memory.
USB devices
Problem
Check
Remedy
USB device is not recognized.
Is the USB device properly connected?
Connect the device securely (all the way in).
Is the USB device connected via a USB hub?
USB hubs cannot be used.
Is the USB device supported by this unit?
This unit supports such USB mass storage class USB devices as external hard
disks and portable flash memory devices.
Is the file format supported by this unit?
Check the file format of the connected USB device. For the file formats supported by this unit, see About USB devices on page 5.
Are you using a USB device (such as a bus powerdriven hard disk) whose current is higher than this
unit’s rated current (500 mA)?
Use a USB device within this unit’s rated current (such as a hard disk driven by
an AC adapter or other external power supply).
—
Turn the power off, wait 1 minute, then turn the power back on.
Is there a large number of folders or files recorded
on the USB device?
When there are many folders or files, some time may be required for loading.
Are files other than music files stored on the USB
device?
When files other than music files are stored in folders, time is required to read
them as well. Do not store files or folders other than music files on the USB
device.
Time is required to read USB devices
(flash memory drives and hard discs).
Playback does not start when a track
is loaded from a USB device.
Are the files playable?
See Playable music file formats on page 5.
Is the auto cue function activated?
Press the [TIME(AUTO CUE, QUANTIZE)] button for over 1 second to cancel the
auto cue function. (page 18)
File cannot be played.
Is the file copyright-protected (by DRM)?
Copyright-protected files cannot be played.
Music files cannot be played.
Are the music files damaged?
Play music files that are not damaged.
DJ software
Problem
Check
Remedy
DJ software on a computer cannot be
operated.
Is the included USB cable properly connected?
Connect the computer and this unit directly using the included USB cable. USB
hubs cannot be used. (page 10)
DJ software’s sound is not properly
output.
Are the DJ software’s output settings and this
unit’s [MIXER MODE] setting properly set?
Check the DJ software’s settings, then check this unit’s settings on the
[UTILITY] screen and set the proper signal path. (page 27)
Is the driver software properly set?
Set the driver software properly. (Page 26)
Are the connection cables properly connected?
Connect the connection cables properly. (page 10)
Are terminals or plugs dirty?
Wipe any dirt off terminals and plugs before connecting.
Is the connected, power amplifier, powered speakers, etc., properly set?
Properly set the external input selection, volume, etc., on the power amplifier,
powered speakers, etc.
Is the driver software’s latency value suitable?
Set the driver software’s latency to a suitable value. (Page 26)
Sound being played is interrupted
when using DJ software.
36
En
Set the DJ software’s latency to a suitable value.
Wireless LAN
Problem
Check
Remedy
Links cannot be established.
Is the wireless LAN connection properly
connected?
Properly connect the mobile device and this unit by wireless LAN. (page 11)
Is another mobile device already connected?
Only one mobile device can be connected.
Connection with mobile device is not
possible, mobile device cannot be
operated or no sound is produced.
See “Basic Operation” in the remotebox operating instructions.
Is there a device producing electromagnetic waves Either install this unit away from the device producing electromagnetic waves or
in the 2.4 GHz band (microwave oven, other wirestop using the device producing electromagnetic waves.
less LAN device, etc.) nearby?
Are the mobile device and this unit too far apart or
is there an obstacle between them?
Install in the same room within a line-of-sight distance (with no obstacles) of 40
meters. (This line-of-sight distance is rough indication. The actual distance at
which communications are possible may differ, depending on the surrounding
environment.)
Error messages
When this unit cannot operate normally, an error code appears on the display. Check the table below and take the measures indicated. If an error code
not shown on the table below is displayed, or if the same error code is displayed again after taking the indicated action, contact your store of purchase
or a nearby Pioneer service station.
Error type
Description of error
Cause and action
E-7201
CANNOT READ DISC
TOC data cannot be read.
E-8301
CANNOT READ DISC
Disc that cannot be played normally is
loaded.
E-8302
CANNOT PLAY TRACK
!
!
!
!
E-8303
CANNOT PLAY TRACK
E-8304
E-8305
UNSUPPORTED FILE FORMAT
Music files that cannot be played normally
are loaded.
Format is wrong.dReplace with music files in the proper format.
MECHANICAL TIMEOUT
Mechanical error (time out) during loading
or ejecting of disc.
Displayed when mechanism operation is not completed within the specified time.
E-9101
Track data (file) on the disc or storage
device (USB) cannot be read properly.
Disc is cracked.dReplace the disc.
Disc is dirty.dClean the disc.
If operation is normal with other discs, the problem is with that disc.
The track data (file) may be corrupt. dCheck whether the track (file)
can be played on another player, etc., capable of playing the same
formats as this unit.
Additional information
Error code
Block Diagram
MIC
LEVEL
AUX
LEVEL
EQ
CH1 LINE/PHONE
PC DECK A
Sound
Color FX
(NOISE)
CH1 CD
3 Band
Isolator
Beat FX
(ROLL)
Sound
Color FX
BPM HOT SAMPLER
Detect CUE
USB
Sound
Color FX
(NOISE)
PC DECK B
CH2 LINE/PHONE
PC
AUDIO
Trim
3 Band
Isolator
Beat FX
(ROLL)
Sound
Color FX
H.P
CUE 1
Master
LEVEL
PC
MASTER
Cross
Fader
CH
Fader
Beat FX
LEVEL
METER
Beat FX
(ECHO)
CH
Fader
Beat FX
LEVEL
METER
BPM HOT
Detect CUE SAMPLER
CH2 CD
MIXER
MODE
“XDJ-R1”
Trim
MIC
AUX
H.P
PC
MASTER MASTER
OUT
Level
Meter
Booth
Monitor
Beat FX
(ECHO)
BOOTH
OUT
H.P
CUE 2
H.P
MASTER
H.P
CUE 1
MIXER MODE
“PC”
Master
Mix
MASTER
OUT
H.P
CUE 2
HEAD
PHONES
Mix
H.P
LEVEL
PHONES
OUT
PC
PHONES
En
37
List of icons displayed on the main
unit display section
Track/file name
Folder
Artist
Playing
Album
Playback is not possible
Playlist
Track for which hot cue auto
loading is set
Cautions on use
! Do not attach pieces of paper or stickers to discs. Doing so could
warp discs, making it impossible to play them. Also note that rental
discs often have labels attached to them, and the label’s glue may
have oozed out. Check that there is no glue around the edges of such
labels before using rented discs.
About specially shaped discs
Irregularly shaped discs other than standard 12 cm discs cannot be
played on this unit (doing so will lead to damage or accidents).
Specially shaped discs (heart-shaped, hexagonal, etc.) cannot be played
on this unit. Do not attempt to play such discs, as they could damage
the unit.
About condensation
Water droplets (condensation) may form inside the unit (on operating
parts and lenses) in the winter, for example, if the unit is moved from a
cold place into a warm room or if the temperature in the room in which
the unit is installed rises suddenly (through heating, etc.). The unit will
not operate properly and will not be playable with condensation inside.
Let the unit stand for 1 to 2 hours at room temperature (though this
time depends on the conditions of the condensation) without turning on
the power. The water droplets will evaporate and the unit will become
playable. Condensation can occur in the summer as well if the unit is
exposed to the direct wind from an air-conditioner, etc. If this happens,
move the unit to a different location.
Cleaning the lens
The player’s lens should not become dirty in normal use, but if for some
reason it should malfunction due to dust or dirt, consult your nearest
Pioneer authorized service center. Although lens cleaners for players are
commercially available, we advise against using them since some may
damage the lens.
Handling discs
Storing
! Always place discs in their cases and store them vertically, avoiding
hot, humid places, places exposed to direct sunlight and extremely
cold places.
! Be sure to read the cautions included with the disc.
Cleaning discs
! Discs may not play if there are fingerprints or dust on them. In this
case, use a cleaning cloth, etc., to gently wipe the disc from the
inside towards the outside. Do not use dirty cleaning cloths.
! Do not use benzene, thinner or other volatile chemicals. Also do not
use record spray or antistatic agents.
! For tough dirt, apply some water to a soft cloth, wring out thoroughly,
wipe off the dirt, then wipe off the moisture with a dry cloth.
! Do not use damaged (cracked or warped) discs.
! Do not let the signal surface of discs get scratched or dirty.
! Do not place two discs in the disc tray, one on top of the other.
38
En
About condensation on discs
Water droplets (condensation) may form on the surface of discs if they
are moved from a cold place (particularly in winter) into a warm room.
Discs may not play normally if there is condensation on them. Carefully
wipe the water droplets off the surface of the disc before loading it.
About trademarks and registered
trademarks
! Pioneer, rekordbox and remotebox are trademarks or registered
trademarks of the PIONEER CORPORATION.
! Microsoft, Windows, Windows Vista and Internet Explorer are either
registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
! Apple, Macintosh, Mac OS, Safari, iTunes, and Finder are trademarks of Apple Inc., registered in the U.S. and other countries.
! Intel and Pentium are trademarks of Intel Corporation in the U.S.
and/or other countries.
! ASIO is a trademark of Steinberg Media Technologies GmbH.
! VirtualDJ is a registered trademark of Atomix Productions.
The names of companies and products mentioned herein are the trademarks of their respective owners.
This product has been licensed for nonprofit use. This product has not
been licensed for commercial purposes (for profit-making use), such
as broadcasting (terrestrial, satellite, cable or other types of broadcasting), streaming on the Internet, Intranet (a corporate network) or other
types of networks or distributing of electronic information (online digital music distribution service). You need to acquire the corresponding
licenses for such uses. For details, see http://www.mp3licensing.com.
— The specifications and design of this product are subject to change
without notice.
© 2013 PIONEER CORPORATION.
All rights reserved.
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
<DRI1083-A>