DIAZED AND NEOZED ACCESSORIES SCREW CAP

DIAZED AND NEOZED ACCESSORIES SCREW CAP
DIAZED AND NEOZED
ACCESSORIES
SCREW CAP
The Screw Cap types offered fit the
various fuse and Fuse Base sizes. They
hold the fuses in place and connect the
head of the fuse with the load side of the
Fuse Holder. The colored blown fuse
indicator on the head of the fuse is
clearly visible through a small window in
the top of the Screw Cap. A small test
hole on the side of the Cap allows for a
probe to test if voltage is present on the
metallic surface on the head of the fuse.
ADAPTER SCREW / RING
Adapter Screws are used with the
Diazed, and Adapter Rings are used with
the Neozed Fuses. Three sizes of
Screws and Rings are available to fit the
diameter of the different size fuse bases.
Adapter Screws are porcelain rings with a
center hole on one side, a threaded stud
on the other and one notch on each side.
The inside diameter of the center hole of
the Adapter Screw matches the diameter
of the tip of the Diazed fuse for which it is
intended. This helps to eliminate the
insertion of fuses with higher current
ratings than allowed. The integral
threaded stud installs into the appropriate
Diazed Fuse Base. Adapter Screws and
Rings are color coded to the fuses.
FUSE BASE
Fuse Bases hold fuses in place (in
conjunction with the Screw Cap) and
insure proper electrical connections.
They snap easily onto standard 35mm
DIN rail or can be panel mounted. They
are available in one or three pole
designs. Matching Covers are available.
The line is connected to the metal tab at
the bottom of the fuse base. The load is
connected to the metal ring into which
the Screw Cap is installed.
FUSE BASE COVER
Fuse Base Covers are available in one
and three pole designs to match the Fuse
Bases we offer. They help prevent shock
from accidental touching of conducting
metal parts on the Base.
TOOLS
The Adapter Screw / Ring Tools aid in
the insertion and removal of the Adapters
from the Fuse Base. The Adapter Screw
Tool fits into notches on the Adapter
Screw for the D27 and D33 Diazed
fuses. The Adapter Ring Tool fits the
Adapter Rings for the D01, D02 and D03
Neozed fuses. We strongly recommend
these tools be used when inserting or
removing Adapter Screws or Rings to
prevent electrical shocks.
Thread
Diazed Screw Cap
Screw Cap
Fuse Head
Cat. No.
Approx.
Dim. mm (in.)
Use With
Height
Thread Dia. Fuse(s)
D16C
D27C
D33C
34 (1.34)
43 (1.69)
43 (1.69)
16 (.63)
27 (1.06)
33 (1.30)
ND-E 16
DII-E 27
DIII-E 33
Fuse Body
Fuse Tip
Adapter
Screw
Fuse
Base Cover
Diazed Adapter Screw Tool
Use With
Fuse (s)
Cat. No.
Fuse Base
DAT
DII-E 27, DIII-E 33
The Neozed System
Screw Cap
Thread
Fuse Head
Fuse Tip
Adapter
Ring
➛
Neozed Screw Cap
Cat. No.
Approx.
Dim. mm (in.)
Use With
Height
Thread Dia. Fuse(s)
NZ01C
NZ02C
NZ03C
31 (1.22)
31 (1.22)
37 (1.46)
Fuse Body
14 (.55)
18 (.71)
30 (1.18)
D01
D02
D03
Fuse
Base Cover
Neozed Adapter Ring Tool
Fuse Base
Cat. No.
NAT
10
➛
The Diazed System
Use With
Fuse(s)
D01, D02, D03
Altech Corp.® ● 35 Royal Road Flemington NJ 08822-6000 ● Phone (908) 806-9400 ● Fax (908) 806-9490 ● www.altechcorp.com
Diazed Adapter Screw
Cat. No. Current Color
For Fuse Type DII-E 27
D27AS02 2A
Pink
D27AS04 4A
Brown
D27AS06 6A
Green
D27AS10 10A
Red
D27AS16 16A
Gray
D27AS20 20A
Blue
D27AS25 25A
Yellow
Height : 14mm (.55 in.)
For Fuse Type DIII-E 33
D33AS35 35A
Black
D33AS40 40A
Black
D33AS50 50A
White
D33AS63 63A
Copper
Height : 14mm (.55 in.)
Use With
Fuse(s)
2D27SB(FB)(SC)
4D27SB(FB)(SC)
6D27SB(FB)(SC)
10D27SB(FB)(SC)
16D27SB(FB)(SC)
20D27SB(FB)(SC)
25D27SB(FB)(SC)
Diazed Fuse Base
No. of Cat.
Poles No.
1
1
1
Diazed Fuse Base Cover
Use
With
Fuse(s)
No. of
Poles
Cat.
No.
Approx.
Dim. mm (in.)
Height
Width
D16BC 20 (.79)
D27BC 20 (.79)
D33BC 20 (.79)
Use
With
Fuse(s)
D16B
D27B
D33B
45 (1.77) 29 (1.14) ND-E 16
46 (1.81) 38 (1.50) DII-E 27
48 (1.89) 49 (1.93) DIII-E 33
1
1
1
3 D27B3
3 D33B3
46 (1.81) 90 (3.54) DII-E 27
46 (1.81) 109 (4.29) DIII-E 33
3 D27BC3 20 (.79) 90 (3.54) DII-E 27
3 D33BC3 20 (.79) 111 (4.37) DIII-E 33
40 (1.57) ND-E 16
40 (1.57) DII-E 27
49 (1.93) DIII-E 33
35D33SB(FB)(SC)
40D33SB(FB)(SC)
50D33SB(FB)(SC)
63D33SB(FB)(SC)
Neozed Fuse Base
Neozed Adapter Ring
Cat. No.
Approx.
Dim. mm (in.)
Height Width
Current Color
For Fuse Type D01
NZ01AR02
2A
Pink
NZ01AR04
4A
Brown
NZ01AR06
6A
Green
NZ01AR10 10A
Red
Height : 10mm (.39 in.)
For Fuse Type D02
NZ02AR20 20A
Blue
NZ02AR25 25A
Yellow
NZ02AR35 35A
Black
NZ02AR50 50A
White
Height : 10mm (.39 in.)
For Fuse Type D03
NZ03AR80 80A
Silver
Height : 10mm (.39 in.)
Use With
Fuse(s)
2NZ01GL(SC)
4NZ01GL(SC)
6NZ01GL(SC)
10NZ01GL(SC)
No. of Cat.
Poles No.
Approx.
Dim. mm (in.)
Height
Width
Neozed Fuse Base Cover
Use
With
Fuse(s)
No. of
Poles
Cat.
No.
Approx.
Dim. mm (in.)
Height Width
Use
With
Fuse(s)
1
1
1
NZ01B 42 (1.65) 27 (1.06)
NZ02B 42 (1.65) 27 (1.06)
NZ03B 46 (1.81) 44 (1.73)
D01
D02
D03
1
1
1
NZ01BC 23 (.91) 27 (1.06)
NZ02BC 23 (.91) 27 (1.06)
NZ03BC 18 (.71) 44 (1.73)
D01
D02
D03
3
3
NZ01B3 42 (1.65) 81 (3.19)
NZ02B3 42 (1.65) 81 (3.19)
D01
D02
3 NZ01BC3 23 (.91) 81 (3.19)
3 NZ02BC3 23 (.91) 81 (3.19)
D01
D02
20NZ02GL(SC)
25NZ02GL(SC)
35NZ02GL(SC)
50NZ02GL(SC)
80NZ03GL(SC)
Altech Corp.® ● 35 Royal Road Flemington NJ 08822-6000 ● Phone (908) 806-9400 ● Fax (908) 806-9490 ● www.altechcorp.com
11
Fuse Holders, 10 x 38 mm and CC Type
1 POLE
2 POLE
3 POLE
17.5 mm
35 mm
52.5 mm
Height x Length
81 x 64.5 mm
81 x 64.5 mm
81 x 64.5 mm
Stripping Length
11 mm
11 mm
11 mm
Insulation Material
Aculon ®
Aculon ®
Aculon ®
Type of Connection
2 screw clamps
2 screw clamps
2 screw clamps
1.5-25sq.mm / 24-4 AWG
1.5-25sq.mm / 24-4 AWG
1.5-25sq.mm / 24-4 AWG
690 V / 32A
690 V / 32A
690 V / 32A
The main characteristics of
fuse disconnectors are:
• UL recognized (10x38mm)
• UL listed (CC Type)
• Compliance with IEC
60947-1, IEC 60947-3
• Plastic parts are made of
material resistant to high
temperatures
• All contact surfaces are
silver plated
• Mounting on standard DIN
35 mm rail (DIN EN60715).
• Available up to 4 pole
• For all sizes a version with
electronic indicator is
available. There are two
technical types of indicator:
L (LED) (10x38mm only) with
built in LED diode which
blinks after the fuse-link
operates. The internal circuit
resistance is 2M, thus the
total dissipation is minimal.
The indicator is capable of
operating in conditions of
open circuit with minimum
capacitance be-tween connection cables. Operating
voltage range spans from
50V to 690V AC and DC.
Terminal Width (B)
Wire Range
Rating
Rating
Torque
Cylindrical 10x38
Indicator:
None
LED
Neon
600 V AC/DC / 30A
600 V AC/DC / 30A
2-2.5 Nm / 31 lb-in
Cat. No.
2-2.5 Nm / 31 lb-in
Std. Pk.
CB1038-1
CB1038-1/L
CB1038-1/I
Cat. No.
CB1038-2
CB1038-2/L
CB1038-2/I
1
1
1
Ø10 x 38 mm
Type of Fuse Used
Std. Pk.
1
1
1
600 V AC/DC / 30A
2-2.5 Nm / 31 lb-in
Cat. No.
Std. Pk.
CB1038-3
CB1038-3/L
CB1038-3/I
Ø10 x 38 mm
1
1
1
Ø10 x 38 mm
Approvals**
E212627
CC Type Holder
I (NEON) (10x38mm only)
with neon lamp, which is
constantly lit after the fuselink operates. The internal Type of Fuse Used
circuit resistance is 570k,
thus it is necessary that the Approvals
circuit be closed in order for
the indicator to function. The
operational voltage range is DIN Rail
for ordering information
100 V to 750 V AC.
Cat. No.
E212627
Std. Pk.
CB10CC-1
1
Cat. No.
Std. Pk.
CB10CC-2
CC Type
1
E212627
Cat. No.
CB10CC-3
CC Type
E212627
Std. Pk.
1
CC Type
E212627
E212627
refer to pages 90-91
* Fuses are sold separately
Altech, see pages 100-101.
**1000V UL PV rating
pending.
End Stop
for ordering information
refer to page 92
CA702
CA802
50
50
CA702
CA802
50
50
CA702
CA802
50
50
79 mm (3.11 in.)
64.5 mm (2.54 in.)
47.5 mm (1.87 in.)
37 mm (1.46 in.)
CC Type
14
4 mm (0.16 in.)
B
81 mm (3.19 in.)
Cylindrical
10 x 38
Dimension for B:
1 Pole
1 Pole + Neutral
2 Pole
3 Pole
3 Pole + Neutral
17.5mm
35mm
35mm
52.5mm
70mm
Altech Corp.® ● 35 Royal Road Flemington NJ 08822-6000 ● Phone (908) 806-9400 ● Fax (908) 806-9490 ● www.altechcorp.com
Cylinder Fuse Holders, 8 x 31 mm, 14 x 51 mm and 22 x 58 mm
8 x 31
14 x 51
22 x 58
17.5 mm (0.69 in.)
17.5 mm (0.69 in.)
35 mm (1.38 in.)
35 mm (1.38 in.)
35 mm (1.38 in.)
52.5 mm (2.07 in.)
52.5 mm (2.07 in.)
70 mm (2.76 in.)
27 mm (1.07 in.)
27 mm (1.07 in.)
54 mm (2.15 in.)
54 mm (2.15 in.)
54 mm (2.15 in.)
81 mm (3.20 in.)
81 mm (3.20 in.)
108 mm (4.25 in.)
27 mm (1.07 in.)
27 mm (1.07 in.)
71 mm (2.80 in.)
71 mm (2.80 in.)
71 mm (2.80 in.)
107 mm (4.20 in.)
107 mm (4.20 in.)
142.5 mm (5.60 in.)
81 x 64.5 mm
(3.20 x 2.40 in)
94 x 70 mm
(3.70 x 2.76 in)
120.5 x 70 mm
(4.73 x 2.76 in)
Insulation Material
Aculon ®
Aculon ®
Aculon ®
Type of Connection
2 screw clamps
2 screw clamps
2 screw clamps
Mininum
Max. Stranded
Max. Solid
1 sq mm (18 AWG)
16 sq mm (6 AWG)
25 sq mm (4 AWG)
1 sq mm (18 AWG)
25 sq mm (4 AWG)
35 sq mm (2 AWG)
1.5 sq mm (16 AWG)
35 sq mm (2 AWG)
50 sq mm (1 AWG)
Rating
600V AC/DC / 30A
600V AC/DC / 50A
N/A
Rating
400V AC/DC / 20A
400V AC/DC / 50A
500V AC/DC / 32A
690V AC/DC / 25A
400V AC/DC / 125A
500V AC/DC / 100A
690V AC/DC / 80A
2-2.5 Nm / 31 lb-in
2.5 Nm / 22 lb-in
3 Nm / 26 lb-in
Fuse Bases secure the
fuses in place and insure
proper electrical connections. Fuse Bases are
available in one, two,
three and four pole
designs. Types 8x31 and
10x38 are easily DIN rail
mounted; Types 14x51
and 22x58 can be DIN rail
Terminal Width
mounted or mounted to
1 pole:
any flat surface. Cylinder
1 pole + indicator:
Fuse Bases are available
1 pole + N:
with optional blown fuse
2 pole:
indication.
The main characteristics
of fuse disconnectors are:
• UL recognized (8x31 and
14x51 mm only)
• Compliance with IEC
60947-1, IEC 60947-3
• Plastic parts are made of
material resistant to
high temperatures
• All contact surfaces are
silver plated
• Mounting on standard
DIN 35 mm rail (DIN
EN60715).
• Available up to 4 pole
• For all sizes a version
with electronic indicator
is available.
2 pole + indicator:
3 pole:
3 pole + indicator
3 pole + N:
Height x Length
Wire Range
Torque
The 8x31 fuse holders
Type
with indicator are built
with a NEON lamp, which
1 pole:
is constantly lit after the
1 pole + indicator:
fuselink operates. The
1 pole + N:
internal circuit resistance
2 pole:
is 570k, thus it is neces2 pole + indicator:
sary that the circuit be
3 pole:
closed in order for the
3 pole + indicator
indicator to function. The
3 pole + N:
operational voltage range
is 100 V to 750 V AC.
Type of Fuse Used
The 14x51 and 22x58 fuse
Approvals**
holders with indicator have a
built in LED which blinks
after the fuse-link operDIN Rail
ates. The internal circuit
resistance is 2M, thus the
total dissipation is
minimal. The indicator is End Stop
capable of operating in
conditions of open circuit
with minimum capacitance between connection
cables. Operating voltage
range spans from 50V to
690V AC and DC.
Cat. No.
Std. Pk.
12
12
6
6
6
4
4
3
CB831-1
CB831-1/I
CB831-1N
CB831-2
CB831-2/I
CB831-3
CB831-3/I
CB831-3N
Cat. No.
Cat. No.
Std. Pk.
3
3
2
2
2
1
1
1
CB2258-1
CB2258-1/I
CB2258-1N
CB2258-2
CB2258-2/I
CB2258-3
CB2258-3/I
CB2258-3N
14x51 mm
E212627
50
50
12
12
6
6
6
4
4
3
CB1451-1
CB1451-1/I
CB1451-1N
CB1451-2
CB1451-2/I
CB1451-3
CB1451-3/I
CB1451-3N
8x32 mm
CA702
CA802
Std. Pk.
22x58 mm
E212627
CA702
CA802
50
50
CA702
CA802
50
50
* Fuses are sold separately.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
15
NH FUSE
ACCESSORIES
FUSE BASE
Fuse Bases hold fuses in place and
insure proper electrical connections.
Available in one or three pole designs.
Three-pole Fuse Bases are supplied
with two Separator Plates which should
be installed between poles. We recommend the use of End Plates and
Terminal Covers for increased safety.
END PLATE
End Plates increase safety and provide
separation between devices. Install by
inserting End Plate into mounting entry
slot on right or left side of Fuse Base.
We recommend installing one End Plate
on each side of the Fuse Base.
TERMINAL COVER
Covers increase safety by covering the
conducting metal hardware of the Fuse
Base and the Fuse. We suggest
Terminal Covers be used in conjunction
with End Plates. To install slide Terminal
Cover over terminal slot and snap in
place.
MICROSWITCH
Microswitches can be field mounted on
NH fuses for remote blown fuse indication. (Sketch below)
Fuse Base
Fuse End Plate
No. of
Poles
Cat. No.
Length
mm (in.)
Use With
Fuse(s)
1
3
NHB00-1
NHB00-3
122 (4.80)
139 (5.47)
NH00
NH00
1
NHB0-1
170 (6.69)
NH0
NHEP0
62 (2.44) 180 (7.09)
NHB0-1-3
1
3
NHB1-1
NHB1-3
202 (7.95)
214 (8.42)
NH1
NH1
NHEP1
62 (2.44) 214 (8.42)
NHB1-1-3
1
3
NHB2-1
NHB2-3
227 (8.94)
260 (10.24)
NH2
NH2
NHEP2
90 (3.54) 260 (10.24)
NHB2-1-3
1
NHB3-1
242 (9.53)
NH3
NHEP3 101 (3.98) 242 (9.53)
NHB3-1-3
1
NHB4-1
310 (12.20)
NH4
1
NHB4A-1
338 (13.31)
NH4A
1
NHSMB
146 (5.75)
NH00SM
Cat. No.
NHEP00 62 (2.44) 121 (4.76)
Microswitch
Microswitch
Fuse
Cat. No.
NHMS
Current/
Voltage
Approx.Dim. mm (in.) Use With
Width
Length Fuse Base(s)
NHB00-1-3
Terminal Cover
Use With
Fuse(s)
5/250V AC NH Knife Blade
(SPDT) or NH Stud Mount
(All Sizes)
Cat. No.
Use With
Fuse Base(s)
NHTC00
NHB00-1-3
FUSE HANDLE
We strongly suggest using the Fuse
Handle when inserting or removing fuses
from the Fuse Base to prevent electrical
shocks. For increased safety, use Fuse
Handle with integral safety glove. Both
Fuse Handles are for use with NH-Knife
Blade Fuses, NH00 - NH4.
Fuse Handle
Cat. No.
Description
NHHA
Fuse Handle
NHSG
Fuse Handle
with Safety Glove
For maximum protection use Fuse Handle with
integral safety glove, not shown.
Altech Corp.® ● 35 Royal Road Flemington NJ 08822-6000 ● Phone (908) 806-9400 ● Fax (908) 806-9490 ● www.altechcorp.com
19
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Altech:
CB1038-1 CB1038-2/I CB1038-3 CB1451-1 CB1451-3 CB2258-1 CB2258-3 D16C CB1038-3/L
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement