Zanussi ZWF 1651W Installation guide

132982780.qxd
29/03/2006
15.07
Pagina
1
(Nero/Process Black pellicola)
WASHING MACHINE
ZWF 1651W
Memory1
Off
Cottons
Cottons Economy
Memory2
Synthetics
Xpress 60°
Delicate Spin
Delicates
TIMELINE
1600 7 kg
Temp.
Spin
Options
Change
Exit
Start/
Pause
Handwash
Spin
JETSYSTEM
Drain
Wool
Rinse
Minipr. 30
Silk
ZWF 1651 W
Quick Installation Guide:
visit our WEB SITE to view an install video
www.video.uk.electrolux.com
132 982 780
INSTRUCTION BOOKLET
GB
132982780.qxd
29/03/2006
15.07
Pagina
2
(Nero/Process Black pellicola)
Important Safety Information
It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move
house and leave the appliance, always ensure that the book is supplied with the appliance in
order that the new owner can get to know the functioning of the appliance and the relevant
warnings.
These warnings have been provided in the interest of safety. You MUST read them carefully
before installing or using the appliance.
Installation
Use
●
●
●
●
●
●
●
●
●
This appliance is heavy. Care should be taken when
moving it.
It is dangerous to alter the specifications or attempt
to modify this product in any way.
All packing and transit bolts must be removed before
use. Serious damage can occur to the product and to
property if this is not adhered to. See relevant section
in instructions.
Any plumbing work required to install this appliance
should be carried out by a qualified plumber or
competent person.
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
Care must be taken to ensure that the appliance does
not stand on the electrical supply cable.
If the machine is situated on a carpeted floor, please
adjust the feet in order to allow air to circulate freely
Always be sure, that there is no water leakage from
hoses and their connections after the installation.
●
●
●
●
●
●
Child Safety
●
●
●
●
●
This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the
controls or play with the product.
Pets and children have been known to climb into
washing machines. Please check your drum before
use.
The glass door becomes very hot during the washing
cycle. Keep children away from the vicinity of the
appliance whilst it is in operation.
Keep all packaging well away from children.
Keep all detergents in a safe place out of children’s
reach.
●
●
●
●
2
Always unplug the appliance and turn off the water
supply after use.
Do not overload the appliance. See relevant section
in the instruction book.
Only wash fabrics which are designed to be machine
washed. If in doubt, consult the care label on the
clothes.
Before washing, ensure that all pockets are empty
and buttons and zips are fastened. Avoid washing
frayed or torn articles and treat stains such as paint,
ink, rust, and grass before washing. Underwired bras
must NOT be machine washed.
Any objects such as coins, safety pins, nails, screws,
stones or any other hard, sharp material can cause
extensive damage and must not be placed into the
machine.
Garments which have been in contact with volatile
petroleum products should not be machine washed.
If volatile cleaning fluids are used, care should be
taken to ensure that the fluid is removed from the
garment before placing in the machine.
Wash small items such as socks, laces, washable
belts etc in a washing bag or pillow case as it is
possible for such items to slip down between the tub
and the inner drum.
Only use the advised quantities of fabric softener.
Damage to the fabric can ensue if you over-fill.
Refer to the manufacturer’s recommendations of
quantities.
As some duvets and eiderdowns should be washed
in large commercial machines because of their bulk,
please check with the manufacturer of the item
before washing in a domestic machine.
Leave the porthole door slightly ajar between washes
to preserve the door seal.
Under no circumstances should you attempt to repair
the machine yourself. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Contact your local Service Force
Centre. Always insist on genuine spare parts.
132982780.qxd
29/03/2006
15.07
Pagina
3
(Nero/Process Black pellicola)
Contents
For the User
Wash Care Symbols
Important Safety Information
2
Your New Washing Machine
4
Description of the Appliance
5
5
5
Detergent dispenser drawer
Child safety feature
The Control Panel
Programme information
6-11
12
Operating Sequence
13-16
Washing 6 kg of white cotton at 90°C
13
Load the laundry
13
Measure out the detergent and the fabric softener
13
Switch the machine on
13
Switching the machine on for the first time
13-14
Select the desired programme/fabric
14
Select the temperature
14
Select the Spin Speed, the Rinse Hold or the Night
Cycle option
14
Select the desired options
14
Select the Delay Time
15
Start the programme
15
How to change a programme during its cycle
15
Cancelling a programme
15
How to open the door during the cycle of a
programme
15
End of programme
16
Washing Hints
Which detergent?....
And in which form?
19
Washing Programmes
20-21
Maintenance and Cleaning
Descaling
After each wash
Maintenance Wash
External cleaning
Cleaning the dispenser drawer
Cleaning the drawer recess
Cleaning the pump
Cleaning the water inlet filter
The dangers of freezing
Emergency emptying out
22-23
22
22
22
22
22
22
22-23
23
23
23
Something Not Working
24-25
Service and Spare Parts
25
Guarantee Conditions
26
For the Installer
Installation Instructions
27
Technical Specifications
27
28
28
29
29-30
30
30
30-31
31
31
Unpacking
Positioning
Water inlet
Water drainage
Levelling
Special conditions
In the interest of the environment
Electrical connection
Permanent connection
17-18
18
18
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
Hints and tips
Environmental information
3
132982780.qxd
29/03/2006
15.07
Pagina
4
(Nero/Process Black pellicola)
Your New Washing Machine
Your new washing machine, which is fitted with the New Jet System, meets all modern
requirements for effective treatment of laundry with low water, energy and detergent
consumption.
●
●
●
●
The special Handwash and Silk programme with
their new delicate wash system treats your delicate
items with extreme care.
The special Wool programme with its new delicate
wash system treats your woollens with extreme care.
The automatic cooling of the washing water from
90° to 60°C before draining will prevent old drain
pipes from being deformed.
The balance control device ensures the machine is
stable during the spin.
In the interest
of the environment
●
●
●
Ecological hints
●
To save water and energy and help protect the
environment, we recommend that you follow these
hints:
● Adjust the quantity of detergent according to the
hardness of your water supply, the amount of
laundry and the degree of soiling.
● A programme without prewash is sufficient for
normally soiled laundry.
● The machine works more economically if it is fully
loaded.
● With adequate pre-treatment, stains and limited
soiling can be removed; the laundry can then be
washed at a lower temperature, so saving energy.
Materials marked with the symbol
are
recyclable.
Check with your local Council or Environmental
Health Office to see if there are facilities in your area
for re-cycling this appliance.
When the appliance is to be scrapped, cut off the
power supply cable and make the door lock device
unusable to prevent young children from being
trapped inside.
Help to keep your country tidy - use authorised
disposal sites for your old appliance.
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product. For more detailed information about
recycling of this product, please contact your local
city office, your household waste disposal service or
the shop where you purchased the product.
How do we help to protect the environment?
We use recycled paper!
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the
wash load manually and select a spin programme. For more detailed information see the section headed "Something
Not Working".
4
132982780.qxd
29/03/2006
15.07
Pagina
5
(Nero/Process Black pellicola)
Description of the Appliance
1
2
3
4
5
1
Detergent dispenser drawer
Control panel
Door opening handle
Drain pump
Adjustable feet
2
Memory1
Off
Cottons
Cottons Economy
Memory2
Synthetics
Xpress 60°
Delicate Spin
Delicates
TIMELINE
1 6 0 0 7 kg
Temp.
Spin
Options
Change
Exit
Start/
Pause
Handwash
Spin
JETSYSTEM
Drain
Wool
Rinse
Minipr. 30
Silk
ZWF 1651 W
3
4
5
Detergent dispenser drawer
Prewash
Main wash
Fabric softener
P1206
Child safety feature
This machine incorporates a special child safety feature
to prevent small children from being trapped inside the
machine.
To activate this device, rotate the button (without
pressing it) inside the door clockwise until the groove is
horizontal. If necessary use a coin.
To disable this device and restore the possibility of
closing the door, rotate the button anti-clockwise until
the groove is vertical.
P1131
5
132982780.qxd
29/03/2006
15.07
Pagina
6
(Nero/Process Black pellicola)
The Control Panel
Memory1
Off
Cottons
Cottons Economy
Memory2
Synthetics
Xpress 60°
Delicate Spin
Delicates
JETSYSTEM
T I M EL I N E
1 6 0 0 7 kg
Drain
1
Temp.
Spin
Minipr. 30
Start/
Pause
ZWF 1651 W
3 4
5
6
7
3 Display
The Display is used for setting a large number of
functions and combine them with each other using only
a few control elements (1 programme selector dial and
6 buttons). This simple control method is made easy
thanks to the interactive display.
Interactive means that the washing machine display
changes to reflect each step you have entered. This
ensures that only those settings that make sense are
made. You are able to see the current settings at any
time in the information panel and in the option row.
The selector dial is divided into the following sections:
• Cottons (blue colour), Synthetics (green colour) and
Delicates (gray colour)
• Handwash, Wool, Silk and Minipr. 30 (gray colour)
• Rinses, Drain, Spin and Delicate Spin (gray colour)
• Xpress 60° (blue section), Memory 1, memory 2
(green section)
• Off
1
3
Cotton
Cycle and at
Cottons
Cottons Economy
Memory2
Exit
Silk
2
2 Programme selector dial
Off
Change
Wool
Rinse
1 Detergent dispenser drawer
Memory1
Options
Handwash
Spin
90°C
1600
Temp.
Spin
2
08.30
10.55
Options
Change
Exit
Synthetics
Xpress 60°
Delicate Spin
Delicates
4
Handwash
Spin
Drain
Wool
Rinse
Minipr. 30
Silk
1.
2.
3.
4.
The selector dial can be turned either clockwise or
anticlockwise.
Position Cottons Economy corresponds to the
ENERGY SAVING programme for cotton and position
Off to Reset programme/Switching off of the machine.
At the end of the programme the selector dial must be
turned to position Off, to switch the machine off .
Information panel shows the current settings
Real time clock
End cycle time
Selection shows temperature, spin speed, options
and extras.
4 Temperature button “Temp.”
Press this button repeatedly to increase or decrease the
temperature, if you want your laundry to be washed at a
temperature different from the one proposed by the
washing machine.
Maximum temperatures are 90°C for cotton, 60°C for
synthetic fabrics and Xpress 60°programme, 40°C for
delicate fabrics, wool and fabrics to be hand-washed,
30°C for silk and «Minipr. 30», while «0» corresponds
to cold wash.
Attention!
If you turn the programme selector dial to another
programme when the machine is working, a warning
message appears for 4 seconds on the display while the
buzzer sounds 3 times .
6
132982780.qxd
29/03/2006
15.07
Pagina
7
(Nero/Process Black pellicola)
On cotton and synthetic programmes the rinses will be
performed with more water.
To complete the cycle, choose one of the following
programmes:
By depressing Temperature Temp. button, the relevant
message will appear on the second row of the display
(instead of «cycle end at»). In the corner of the third
row appears the indication of the selected temperature.
• Drain
COTTON
MAX 90°C
To drain the water select Drain programme by means of
the selector dial, then press the Start/Pause button.
08.30
10.55
60°C
Temp.
Spin
Options
Change
• Spin
To spin the laundry choose Spin or Delicate Spin
programme by means of the selector dial; select spin
speed by means of Spin button and then press the
Start/Pause button.
Exit
Important!
Before choosing the programme Drain, Spin or
Delicate Spin the selector dial has to be positioned on
Off.
5 Spin speed button “Spin”
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a speed different
from the one proposed by the washing machine.
COTTON
MAX 1600
6 «Options», «Change» and
«Exit» buttons
08.30
10.55
Options button allows you to move through the option
icons.
1600
Temp.
Spin
Options
Change
Exit
Extra Rinse
No
Maximum speeds are:
• for cotton: 1600 rpm
• for synthetic, wool,
and fabrics to be handwashed: 900 rpm;
• for delicate, silk fabrics, miniprogramme: 700 rpm;
By depressing the Spin speed button you can also
choose No Spin option «0», Rinse Hold option
and
Night cycle option
.
Temp.
Spin
10.55
Options
Change
Exit
Change button allows you to select/change the status of
the different icons.
No spin «0» option eliminates all the spin phases and
increases the number of rinses for cottons and
synthetics.
Rinse hold position
: when you choose this option,
the machine will not drain the water of the last rinse, so
as not to crease the laundry.
Night cycle position
: when you choose this option,
the machine will not drain the water of the last rinse, so
as not to crease the laundry.
As all spinning phases are suppressed, this washing
cycle is very quiet and it can be selected at night or in
times with a more economical power rate.
Extra Rinse
Yes
Temp.
7
Spin
10.55
Options
Change
Exit
132982780.qxd
29/03/2006
15.07
Pagina
8
(Nero/Process Black pellicola)
Exit button allows you to return to the previous
selection.
COTTON
CYCLE END AT
60°C
Temp.
DELAY START: this option makes it possible to
delay the start of the washing programme by 30 min 60 min - 90 min, 2 hours and then by 1 hour till 20
hours. The delay you have selected is indicated in the
display.
08.30
10.55
1400
Spin
Options
Change
Exit
Delay Start
No
Temp.
Depending on the programme, different functions can
be combined. These must be selected after choosing the
desired programme and before depressing the
Start/Pause button.
By depressing the Options button, all the symbol icons,
allowed for the selected programme will appear in the
display.
The first option
will start flashing. Its name and
status will appear in the display.
If you want to change the option status, press Change
button. A line will appear below the selected icon,
indicating that the option is set.
To select the other options press again the Options
button and proceed as before.
Once you have completed the selection of the options,
pressing the Exit button, the selected icons will remain
fixed in the display.
Note: To modify the already chosen option selections,
repeat the previous procedure.
Important! While selecting the option, if you press the
temperature Temp., Spin, or Start/Pause button, the
relative function will be executed.
Spin
10.55
Options
Change
Exit
Delay Start
Start in 30 min
Temp.
Spin
11.25
Options
Change
Exit
You must select this option after you have set the
programme and before you press the Start/Pause
button.
You can cancel the delay time at any moment, before
you press the Start/Pause button. If you have already
pressed the Start/Pause button and you wish to cancel
the Delay time proceed as follows:
1. set the washing machine to PAUSE by pressing the
Start/Pause button;
2. deselect the Delay start option, changing the status;
3. press the Start/Pause button to start the
programme.
Important!
The selected delay can be changed only after selecting
the washing programme again.
The door will be locked throughout the delay time.
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the
Start/Pause button. After you have closed the door,
press the Start/Pause button again.
The Delay Start cannot be selected with Spin, Delicate
Spin and Drain programmes.
EXTRA RINSE: this option can be selected with
all programmes, except the wool/handwash programmes
and miniprogramme. The machine will add 2 rinses for
cottons and 1 rinse for synthetics, delicates and silk.
This option is recommended for people who are allergic
to detergents, and in areas where the water is very soft.
PREWASH: select this option if you wish your
laundry to be prewashed before the main wash (not
available for wool and handwash cycle, Minipr. 30 and
silk).
The prewash phase ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas in
the programme for delicate fabrics the water is only
drained.
TIME SAVING: this option can be used for lightly
soiled cotton, synthetic or delicates items in order to
obtain a good washing programme in a short time. The
washing time will be reduced according to the type of
fabric and the selected temperature. Selecting this option
«Short» or «Very Short» will be shown in the display.
INTENSIVE: for heavy soiled laundry. This
option can be selected only for cottons and synthetics.
The washing time will be prolonged according to the
8
132982780.qxd
29/03/2006
15.07
Pagina
9
(Nero/Process Black pellicola)
Example: Cotton , 60°C, 1400 rpm, with Time saving
option.
1. Select the cycle and programme settings.
cycle temperature and the fabric type.
EASY IRON: selecting this button the laundry is
gently washed and spun to avoid any creasing. In this
way ironing is easier. Furthermore the machine will
perform 6 rinses instead of 3 for cotton and 4 rinses
instead of 3 for synthetics. This function can be used for
cotton and synthetic fabrics. If this option is selected for
cotton programmes, the spin speed automatically will
reduce to 1000 rpm.
Cotton
Cycle end at
60°C
Temp.
ECONOMY: this option can be selected only for
synthetics lightly or normally soiled with a temperature
of 40°C or higher. The washing time will be prolonged.
If you select 60°C - 50°C - 40°C, the washing
temperature will be reduced to 42°C.
08.30
10.55
1400
Spin
Options
Change
Exit
2. Enter the Menu option and select one of the memory
positions. A «Store programme?» message will
appear in the display.
MENU: Menu option is used for selecting various
basic settings without affecting the particular wash
programme. These basic settings will remain active until
they are deselected/modified.
A
B
Setup
Temp.
Selecting MENU Options: sound, rinse +, language,
contrast or brightness.
1. Select a programme in order to turn the appliance
on.
2. Press Options button repeatedly until the
symbol flashes.
3. Press Change
Note: digital instructions are displayed if you wait
3 seconds after displaying each option in this menu.
4. Press Options repeatedly until the required option
choice is displayed.
5. Press Change to select the desired option.
6. Press Exit to return to the set programme.
Memory 1
Store program?
Spin
Options
Change
Exit
A
Temp.
Spin
Options
Change
Exit
B
3. To memorise the selected programme press the
Change button. «Stored» message will appear in the
display.
Program Stored
Temp.
Spin
Options
Change
Exit
Memory
Programme settings that are frequently used can be
saved (e.g. cotton, 60°C, 1400 rpm, with time saving).
There are 2 memory spaces available for this purpose.
The saved programme can be selected in the same way
as any other wash programme by means of the selector
dial.
To change the memorised programme setting repeat the
procedure from the beginning.
Note: once there is information saved in the memory it
cannot be deleted. However, it can be
overwritten/changed.
9
132982780.qxd
29/03/2006
15.07
Pagina
10
(Nero/Process Black pellicola)
LANGUAGE
You can change the language setting if you would like
the indicators in the display to appear in a different
language.
Example:
1. Enter the Menu option and select the Language
setting.
SOUND
The sound setting permits you to modify the function.
You can choose between different levels: low, no sound
and normal.
Example:
1. Enter the Menu option and select the sound setting.
Sound
Normal
Temp.
Spin
Options
Change
Language
ENGLISH
Exit
Temp.
Spin
Options
Change
Exit
2. Use the Change button to select the desired level.
2. Press the Change button to select the desired
Language.
Sound
Low or No Sound
Temp.
Spin
Options
Change
Exit
Einstellungen
Sprache
DEUTCH
Temp.
Spin
Options
Change
Exit
Temp.
Spin
Options
Change
Exit
B
A
RINSE +
The washing machine is set such that its water
consumption is extremely economical. For people with
allergies and in areas where the water is very soft, it can
however be helpful to use more water when rinsing.
When you select “Rinse +”, 2 additional rinses will be
carried out for cottons and 1 additional rinse for
synthetics, delicates and silk items. If “Rinse +” has
been selected,
will appear in the option row.
Extra Rinse
No
Temp.
Spin
10.55
Options
Change
Exit
Extra Rinse
Yes
Temp.
Spin
CLOCK
The clock setting permits you to modify/set up the
current time. It is important to keep it updated as the
current END Cycle Time depends on it.
Example:
1. Enter the Menu option and select the Clock setting.
2. With a short/single time pressure of the Change
button, the time varies minute by minute. With a
continued pressure of the Change button, the time
varies 10 minutes by 10 minutes.
10.55
Options
Change
B
A
Exit
Clock
Set Time
Temp.
14.45
Spin
Options
A
10
Change
Exit
14.46
Clock
Set Time
Temp.
Spin
Options
Change
B
Exit
132982780.qxd
29/03/2006
15.07
Pagina
11
(Nero/Process Black pellicola)
7 START/PAUSE button
CONTRAST
The Contrast setting allows you to modify the optical
characteristic of the display.
Example:
1. Enter the Menu option and select the Contrast
setting.
2. Use the Change button to set up the desired
contrast level.
Contrast
Temp.
Start/
Pause
Contrast
Spin
Options
Change
Exit
Temp.
Spin
Options
A
Change
This button has 2 functions:
• Start: after you have selected the desired programme
and options, press this button to start the washing
machine. The light close to the button will stop
flashing and remain lit.
If you have selected a delay time option, the countdown
will begin and will be shown on the display.
• Pause: when you press this button again, the
programme in progress is interrupted. The light close
to the button will start flashing. To restart the
programme, press the button again.
Exit
B
BRIGHTNESS
The Brightness setting allows you to modify the
backlight intensity of the display.
Example:
1. Enter the Menu option and select the Brightness
setting.
2. Use the Change button to set up the desired
brightness level.
Brightness
When you PAUSE the cycle, it becomes possible to
open the door if:
•
•
•
Brightness
The washing machine is not in the heating phase;
The level of the water is not high;
The drum is not turning.
Important!
Temp.
Spin
Options
A
Change
Exit
Temp.
Spin
Options
Change
Exit
You must set the washing machine to PAUSE before
you make any change in the programme in progress.
B
Note:
At the end of the programme if no button is pressed for
approximately 10 minutes the backlight intensity goes
off.
11
132982780.qxd
29/03/2006
15.07
Pagina
12
(Nero/Process Black pellicola)
PROGRAMME INFORMATION
Wool
Xpress 60°
Washing programme for machine washable wool
as
well as for hand washable woollens and delicate fabrics
with the “hand washing” care symbol.
This is a complete programme to be used for half load
of slightly or normally soiled cotton items. This
programme performs the A-class washing efficiency in
a short time.
It can be selected with the following options: spin speed
reduction, no spin, rinse hold, extra rinse and delayed
start.
Max load: 3 kg
Washing temperature: 60° C
Duration of the programme: 45 min.
Final spin speed: 1200 r.p.m.
Rinse
With this programme it is possible to rinse and spin
garments which have been washed by hand.
The machine performs 3 rinses, followed by a final spin
at maximum speed.
The spin speed can be reduced by depressing Spin
button. The final spin is foreseen only for cotton items
as in the spin programme.
Minipr. 30
This is a complete programme that can be combined
with the following options: spin speed reduction, no
spin, rinse hold or night cycle, delayed start.
To be used for laundry which is lightly soiled or which
needs freshening up.
Max load 3 kg.
Washing temperature 30°C
Programme duration: 31 minutes
Final spin speed 700 r.p.m.
Drain
For draining out the water of the last rinse in
programmes with the Rinse hold
or Night cycle
option
.
First turn the programme selector dial to Off, then select
the Drain programme and depress the Start Pause
button.
Spin
Off/Cancelling
Separate spin at maximum speed for hand washed
garments. Use this for cotton items. You can reduce the
speed by means of Spin button to adapt it to the fabrics
to be spun.
To reset a programme and to switch off the machine
turn the selector dial to Off. Now can a new programme
be selected. A new programme can now be selected.
Delicate Spin
Separate spin at max. 700 rpm. speed for hand washed
garments. Use this for synthetic, delicate, wool/
handwashed, silk items. You can reduce the speed by
means of Spin button to adapt it to the fabrics to be
spun.
12
132982780.qxd
29/03/2006
15.08
Pagina
13
(Nero/Process Black pellicola)
Operating Sequence
3. Switch the machine on
Before the first wash, we recommend that you run a
cotton cycle at 90°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
Turn the selector dial to the desired programme to
switch the appliance on.
To switch the appliance off turn it to Off.
Memory1
WASHING 6 KG OF WHITE COTTON AT 90°C
Suppose you have 6 kg of heavy soiled laundry to wash.
It is white cotton and is suitable for high temperature
washing.
Off
Cottons
Cottons Economy
Memory2
Synthetics
Xpress 60°
Delicate Spin
Delicates
Handwash
Spin
Drain
Wool
Rinse
Minipr. 30
Silk
1. Load the laundry
Open the door by carefully pulling the door handle
outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
Switching the machine on for
the first time
LANGUAGE
When switching on the appliance for the first time you
must set the language in which you want the indicators
in the display to appear.
Important!
If the display is not showing any language, the
appliance has already been switched on once. In such
case, go to the chapter «Change language» if you would
like to change the language setting.
Example:
1. Press the Change button until the desired language
appears in the display.
P0004
2. Measure out the detergent
and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required, pour it
into the main wash compartment
and, if you wish to
carry out the prewash phase,
pour it into the compartment marked .
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
“MAX” mark in the drawer). Close the drawer gently.
P1194
Language
ENGLISH
Temp.
Sprache
DEUTCH
Spin
Options
Change
Exit
Temp.
Spin
Options
Change
A
P1195
13
Exit
132982780.qxd
29/03/2006
15.08
Pagina
14
(Nero/Process Black pellicola)
6. Select the temperature
2.Press the Exit button to confirm the selection.
Press the Temp. button if you wish to select a
temperature value different from the one proposed by
the washing machine.
The message of the maximum available temperature
appears on the second row of the display (instead of
«cycle end at»). In the corner of the third row appears
the indication of the selected temperature.
Einstellungen
Temp.
Spin
Options
Exit
Change
B
All indicators in the display will appear in this language
from now on.
COTTON
MAX 90°C
Note:
If the undesired language has been set, press
simultaneously Spin + Options buttons for about 3
seconds in order to change the language.
Follow the instructions as before.
Turn the selector dial, in order to select the desired
programme/fabric. The relevant message will appear in
the display.
The display will show the END CYCLE TIME of the
selected programme, calculated on the basis of the
maximum load for each type of fabric. The Start/Pause
button light will start flashing.
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate the
END CYCLE relevant to the maximum load. The
duration value will be gradually adjusted during the
execution of the cycle.
Options
Change
Exit
COTTON
MAX 1600
08.30
10.55
40°C
1200
Temp.
Spin
Options
Change
Exit
8. Select the desired options
Cottons Economy
Memory2
Synthetics
Delicate Spin
Delicates
Cotton
Cycle and at
90°C
1600
Temp.
Spin
08.30
10.55
Options
Change
Depress the relevant buttons to select the required
options.
Depending on the selected programme only certain
options are available and shown during the selection
phase.
Exit
Handwash
Spin
Drain
Wool
Minipr. 30
Spin
Cottons
Xpress 60°
Rinse
Temp.
Press the Spin button repeatedly, in order to select the
desired spin speed or No Spin «O» or the Rinse Hold
or the Night Cycle
options. The relevant
message will appear on the second row of the display.
The selected spin level will be shown on the third row
next to the spin button.
If you select the Rinse Hold or Night Cycle options,
the machine will stop at the end of the programme with
the water still in the tub.
5. Select the desired
programme / fabric
Off
1400
7.Select the Spin Speed “Spin”,
the Rinse Hold or Night
cycle
SETTING THE TIME
You should set the time prior to the first wash and when
changing to and from daylight savings time.
See «Clock setting», Menu.
Memory1
08.30
10.55
40°C
Silk
14
132982780.qxd
29/03/2006
15.08
Pagina
15
(Nero/Process Black pellicola)
Note:
Not all the options are compatible between
themselves. The incompatible option icons will
disappear.
Changing a running programme is possible only by
cancelling it and selecting a new programme. Turn the
programme selector dial to Off and then to the new
programme position. The washing water remains in the
tub. Start the new programme by depressing the
Start/Pause button.
9. Select the DELAY TIME
Note: To drain the water before starting the new cycle
you have to cancel the programme and select the Drain
programme.
Before you start the programme, if you wish the starting
to be delayed, choose the DELAY option.
The selected delay time value (up to 20 hours) will
appear on the display while selecting.
The end cycle will be updated and shown on the relative
position of the display.
Delay Start
No
Temp.
Spin
10.55
Options
Change
Exit
Delay Start
Start in 30 min
Temp.
Spin
12. Cancelling a programme
Turn the selector dial to Off to cancel a programme
which is running. Now you can select a new
programme.
11.25
Options
Change
13.How to open the door
during the cycle of a
programme
Exit
You can open the door, after having set the washing
machine to PAUSE, provided the following conditions
exist:
10. Start the programme
Press the Start/Pause button. The relevant light will
stop flashing. The message relevant to the phase that is
in progress will be shown in the display.
If you have chosen a delayed start, the washing machine
will begin the countdown.
COTTON
Washing
40°C
Temp.
START/PAUSE
08.30
12.00
Options
Change
the washing machine is not in the heating phase
beyond 55°C;
•
the level of the water is not high;
If these requirements are met, when you pause the
washing machine, the relevant message appears in the
display the door can be opened.
Should it not be possible to open the door, the “Door
locked” message appears in the display, should it be
absolutely necessary to do so, switch the machine off by
turning the selector dial on Off position.
After approximately 3 minutes, you can open the door.
Pay attention to the level and temperature of the
water in the washing machine!
1200
Spin
•
Exit
11.How to change an option or
a programme during its
cycle
If the programme has already started, before you make
any change, you must pause the washing machine by
pressing the Start/Pause button.
It is possible to change any option before the
programme carries it out.
15
132982780.qxd
29/03/2006
15.08
Pagina
16
(Nero/Process Black pellicola)
14. End of programme
Remove the laundry from the washing machine.
Check whether the drum is completely empty, by
rotating it with your hand. The purpose of this is to
prevent any items of laundry from remaining
accidentally in the drum, where they might get damaged
in a subsequent wash (e.g. by shrinking) or bleed colour
into another load of laundry.
We advise you to close the water supply tap and
disconnect the plug from the socket.
Leave the door ajar in order to air the washing machine.
At the end of the programme, the washing machine
stops automatically, gives an audible signal (if option no
sound has not been selected), and displays the relevant
message.
If you had selected the
or
option, the
Start/Pause button light is off and the “Cycle ended/
Door locked” message appears in the display.
To drain or spin first turn the programme selector dial to
Off and then to Drain programme or “Spin/Delicate
Spin” programme .
Release of the lock is also indicated by the message
“Door openable" (cycle ended) being displayed.
Turn the programme selector dial to Off to switch the
machine off.
16
132982780.qxd
29/03/2006
15.08
Pagina
17
(Nero/Process Black pellicola)
Washing Hints
Do NOT overload the machine. Weigh the laundry the
first few times you use the appliance.
●
The average weights of the most common items are
listed below as a guide:
●
●
1000g = 1 kg
Sheet
700-1000 g
Pillow case
100-200 g
Tablecloth
400-500 g
Serviette
50-100 g
Tea towel
70-120 g
Linen hand towel
100-150 g
Towelling hand towel
150-250 g
Towelling bath towel
700-1000 g
Bath robe
200-300 g
Apron
150-200 g
●
●
●
●
●
●
●
●
●
●
●
●
1000-1500 g
Man’s shirt
●
●
●
Load the laundry loosely alternating large items with
small ones.
Sort the laundry according to the type of fabric,
colour-fastness and how dirty it is.
Avoid washing unhemmed or torn items as they may
unravel.
Before washing, empty all pockets of small objects
which may have been left inside (coins, keys, screws
etc) as these could damage the drain pump.
When washing curtains, remove the hooks.
Close poppers and zips and fasten loose buttons.
It is essential to wash new coloured items separately
when washing for the first time.
When washing fabrics requiring different wash
temperatures together, always select the lowest
temperature.
White items should not be washed with coloured
items.
Very small items (handkerchiefs, ribbons, socks etc)
should be washed in a washing bag or a pillow case.
Use a good quality detergent suitable for automatic
washing machines.
Use the correct quantities of detergent.
17
For wool, use gentle detergent only in small
quantities.
Bleach is very corrosive; it should be used with care
and kept out of reach of children.
Some stains such as fruit, wine, grass, rust etc. are
difficult to remove and should be treated before
washing with specific products, which can be found
in most household shops. In some cases it may help
to soak the stain before washing with a special presoak product or biological detergent.
Only wool marked “Pure New Wool - washable,
preshrunk” can be washed in the machine using the
wool programme; other types of wool should be
washed in HANDWASH programme.
If you have used the machine to wash, rinse or spin
only non-colour fast garments, there may be dye left
in the sump. To ensure any subsequent wash is not
contaminated with the dye, select and carry out a
rinse and spin programme, without any garments, to
ensure that any dye is removed from the sump.
Once you have finished using the machine, you are
advised to unplug it and turn off the water tap.
132982780.qxd
29/03/2006
15.08
Pagina
18
(Nero/Process Black pellicola)
Which detergent?....
And in which form?
To ensure you obtain the best wash results from your
appliance, it is important to use the right detergent in
your everyday wash, and only detergents recommended
for use in automatic machines.
To maintain the appearance of your clothes and
household textiles and to make them last longer you
should use different types of detergent for different
washes, whether for whites, colours or delicates.
Not only are there different types of detergent, but they
are also available in different forms. Whether you chose
a powder or liquid in traditional or compact form is
your own personal choice.
TRADITIONAL POWDERS
Pour the powder directly into the dispenser drawer. Do
not sprinkle powder onto clothes in the machine drum.
TRADITIONAL LIQUIDS
WHITES
Liquid can be placed in the main wash compartment of
the detergent drawer marked with the symbol
, start
the machine immediately upon placing the detergent in
the dispenser drawer.
Alternatively the detergent is measured into the
specially designed dosing device* which should be
placed on top of the laundry, and at the back of the
machine drum.
We recommend the Ariel product
range which is biological and
designed to provide excellent
cleaning and stain removal even
at low temperatures.
NON BIOLOGICAL
If you prefer to use a non
biological detergent, which does
not contain enzymes we
recommend Fairy. Fairy provides
good cleaning and stain removal.
COMPACT POWDERS AND LIQUIDS
Compact detergents (or concentrates as they are also
known) are available in liquid or powder form, and
generally require a smaller dosage. Follow the
manufacturer’s instructions to ensure the most
economical usage. Pour the detergent directly into the
dispenser drawer, or alternatively measure the detergent
into the specially designed dosing device* which
should be placed on top of the laundry, and at the back
of the machine drum.
COLOURS
For coloured items you should use a
detergent which is designed to clean
while maintaining the original colour.
Ariel Color does not contain bleach
and therefore helps to preserve
colours.
* If you use a dosing device in a washer dryer,
please ensure the dosing device/ball is removed
before carrying out a drying programme.
DELICATE ITEMS
FABRIC CONDITIONERS
When washing delicates such as
woollens, you should use a product
which is specially designed to care for
fine fabrics.
Dreft Automatic is suitable for
woollens and other delicates.
These are ideal for improving ‘softness’, and also
reduce static cling on synthetics and make ironing
easier. They are available in two types:
For example Lenor liquid fabric
softener, for use in the washing
machine/washer dryer. The
liquid fabric softener should be
poured into the compartment
marked with the symbol .
Follow the manufacturer’s dosage
instructions and never exceed the
MAX level.
LAUNDRY BLEACH
For additional stain removal you may
wish to use a product such as Ace
Gentle Bleach which is used in addition
to your chosen detergent. Ace is
suitable for all washable fabrics
including silks, woollens and colours.
Bounce conditioning sheets for use
in a tumble dryer. We recommend
the conditioning sheets are pinned
(using a safety pin) to an article
of laundry and placed in the
tumble dryer.
18
132982780.qxd
29/03/2006
15.08
Pagina
19
(Nero/Process Black pellicola)
Wash Care Symbols
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct
programme on your washing machine.
WASHING SYMBOL
WASH ACTION
95
Normal (Maximum)
White Cotton or Linen
without Special Finishes
60
Normal (Maximum)
Cotton, Linen or Viscose
without Special Finishes
Colourfast at 60°C.
50
Reduced (Medium)
Nylon, Polyester/Cotton, Viscose
with Special Finishes,
Cotton/Acrylic Mix.
40
Normal (Maximum)
Cotton, Linen or Viscose
Colourfast at 40°C but not 60°C.
40
Reduced (Medium)
Acrylics, Acetate, Triacetate, Wool
mixes, Polyester/wool blends.
40
Much Reduced (Minimum)
Hand wash only
FABRIC
Wool, wool mixtures, Silks
Do not machine wash
BLEACHING
Chlorine bleach may be used
IRONING
Hot iron
Cotton, Linen, Viscose
Warm iron
Polyester mixtures, Wool
Cool iron
Acrylic, Nylon, Polyester
DRY CLEANING
May be dry cleaned. Other letters and/or a bar beneath the circle will
indicate the required process to the dry cleaner.
TUMBLE DRYING
with high heat setting
with low heat setting
May be tumble dried
X
A cross through any symbol means «DO NOT»
Important Notes
fabric conditioner to avoid the conditioner entering the
machine prematurely.
When using liquid detergent and a prewash programme,
place the detergent into the correct compartment in the
dispenser drawer, after the prewash has finished.
For best results, always use the dispenser drawer for
dispensing detergents and liquid additives.
Once the dispenser has been filled, close it by pushing it
in gently. This is particularly important if you are using
19
132982780.qxd
29/03/2006
15.08
Pagina
20
(Nero/Process Black pellicola)
Washing Programmes
Wash programme/
Washing symbol
Type of laundry
Description
Cottons
Main wash at
White and coloured
O (cold) - 90°C
cotton: e.g. sheets,
3 rinses
tablecloths, household linen Long spin
Cottons
Economy(*)
White and coloured cotton
Economy: e.g. shirts,
blouses, underwear, towels,
house-hold linen
Possible options
Max. Progr. time
mins.
load
7 kg
142
Main wash at
60° - 50° - 40°C
2 rinses
Long spin
7 kg
109
Synthetics
Synthetic fabrics: e.g.
shirts, blouses, underwear
Main wash at
O (cold) - 60°C
3 rinses
Short spin
3 kg
88
Delicates
Delicate fabrics: e.g.
acrylic fabrics, viscose,
polyester, synthetic blends
Main wash at
O (cold) - 40°C
3 rinses
Short spin
3 kg
58
Handwash
Special programme for
hand washing fabrics
Main wash at
O (cold)-40°C
3 rinses
Short spin
2 kg
57
Wool
Specially tested programme
for wool garments bearing
the “Pure new wool, nonshrink, machine washable”
label.
Main wash at
O (cold) - 40°C
3 rinses
Short spin
2 kg
57
Silk
Silk
Main wash at 30°C
3 rinses
Short spin
1 kg
39
Minipr. 30
Special short programme
for lightly soiled fabrics
Main wash at
30°C
2 rinses
Short spin
3 kg
31
(*)This programme at 60°C is the reference programme for the Energy label according to EEC Directive 92/75.
The programme times are intended as a guide only. The actual time will vary depending on incoming water
temperature and pressure.
20
132982780.qxd
29/03/2006
15.08
Pagina
21
(Nero/Process Black pellicola)
Washing Programmes
Special programmes
Programme dial
position
Wash programme
Description
Possible options
Max.
load
Progr.
time
mins.
7 kg
48
/
2
Rinse
Separate rinse cycle for
hand washed items of
cotton fabric
3 rinses with liquid
additive, if required.
Long spin at max. speed
Drain
For emptying out the
water of the last rinses
of programmes with
option
or Night
Cycle
Water draining
Spin
Separate spin for
cottons
Drain and long spin at the
max. speed
7 kg
13
Delicate
Spin
Special short programme
for lightly soiled synthetic Drain and delicate spin at
or mixed fabrics
max 700 r.p.m.
(wool, delicates and silk)
7 kg
6
Xpress 60º
Special programme for
half load of slightly or
normally soiled cotton
items
3 kg
45
Off
For cancelling the wash
programme which is
running and for
switching the machine
off
/
-
Main wash at
60°C
2 rinses
Short spin at 1200 r.p.m.
21
132982780.qxd
29/03/2006
15.08
Pagina
22
(Nero/Process Black pellicola)
Maintenance and Cleaning
Before any maintenance or cleaning is carried out you
must DISCONNECT the appliance from the electricity
supply.
Descaling
The water we use normally contains lime. It is a good
idea to periodically use a water softening powder in the
machine. Do this separately from any laundry washing,
and according to the softening powder manufacturer's
instructions. This will help to prevent the formation of
lime deposits.
P1191
P1192
Cleaning the drawer recess
Having removed the drawer, use a small brush to clean
the recess, ensuring that all washing powder residue is
removed from the upper and lower part of the recess.
Replace the drawer and run the rinse programme
without any clothes in the drum.
After each wash
Leave the door open for a while. This helps to prevent
mould and stagnant smells forming inside the appliance.
Keeping the door open after a wash will also help to
preserve the door seal.
Maintenance Wash
With the use of low temperature washes it is possible to
get a build up of residues inside the drum.
We recommend that a maintenance wash be performed
on a regular basis.
To run a maintenance wash:
● The drum should be empty of laundry.
● Select the hottest cotton wash programme.
● Use a normal measure of detergent, must be a
powder (such as Ariel Futur).
P0038
Cleaning the pump
The pump should be inspected if
• the machine does not empty and/or spin
• the machine makes an unusual noise during draining
due to objects such as safety pins, coins etc. blocking
the pump.
Proceed as follows:
• Disconnect the appliance.
• If necessary wait until the water has cooled down.
• Open the pump door.
External cleaning
Clean the exterior cabinet of the appliance with mild
washing up liquid and water only, and then dry
thoroughly.
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer
should be cleaned regularly.
Remove the drawer by pressing the catch downwards
and by pulling it out. Flush it out under a tap, to remove
any traces of accumulated powder.
To aid cleaning, the top part of the additive
compartment should be removed.
P1114
• Place a container close to the pump to collect any
spillage.
• Pull out the emergency emptying hose, place it in the
container and remove its cap.
• When no more water comes out, unscrew the pump
22
132982780.qxd
29/03/2006
15.08
Pagina
23
(Nero/Process Black pellicola)
cover and remove it. Always keep a rag nearby to dry
up spillage of water when removing the cover.
Turn off the water tap. Unscrew the water inlet hose.
Clean the filter using a hard bristle brush.
Tighten up the inlet hose.
P1115
P1090
• Remove any objects from the pump impeller by
rotating it.
The dangers of freezing
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
● Turn off the water tap.
● Unscrew the inlet hose.
● Place the end of the emergency emptying hose and
that of the inlet hose in a bowl placed on the floor
and let water drain out.
● Screw the water inlet hose back on and reposition
the emergency emptying hose after having put the
cap on again.
● When you intend to start the machine again, make
sure that the room temperature is above 0°C.
• Put the cap back on the emergency emptying hose and
place the latter back in its seat.
Emergency emptying out
If the water is not discharged, proceed as follows to
empty out the machine:
• pull out the plug from the power socket;
• close the water tap;
• if necessary, wait until the water has cooled down;
• open the pump door;
• place a bowl on the floor and place the end of the
emergency emptying hose into the bowl. Remove its
cap. The water should drain by gravity into the bowl.
When the bowl is full, put the cap back on the hose.
Empty the bowl. Repeat the procedure until water
stops flowing out;
• clean the pump if necessary as previously described;
• replace the emergency emptying hose in its seat after
having plugged it;
• screw the pump cover again and close the door.
P1117
• Screw the pump cover fully in.
• Close the pump door.
Warning
When the appliance is in use and depending on the
programme selected there can be hot water in the pump.
Never remove the pump cover during a wash cycle,
always wait until the appliance has finished the cycle,
and is empty. When replacing the cover, ensure it is
securely retightened so as to stop leaks and young
children being able to remove it.
Cleaning the water inlet filter
If your water is very hard or contains traces of lime
deposit, the water inlet filter may become clogged.
It is therefore a good idea to clean it from time to time.
23
132982780.qxd
29/03/2006
15.08
Pagina
24
(Nero/Process Black pellicola)
Something Not Working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out
an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below.
During machine operation it is possible that one of the following messages appear on the display and at the same time
an acoustic signal will sound:
• Problem with the water supply: “No incoming water. Check tap & hose”
• Problem with water draining: “No drain. Check drain hose /filter”
• Door open:
“Door not closed. Please check”
Once the problem has been eliminated, press the Start/Pause button to restart the programme. If after all checks, the
problem persists, contact your local Service Centre.
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation, a charge will be made even if the appliance is under guarantee.
Symptom
Possible causes
The machine does not start
●
●
●
●
●
●
The machine does not fill
●
●
●
●
The machine fills then empties
immediately
●
●
●
The machine does not empty and/or
does not spin
●
●
●
●
●
●
There is water on the floor
●
●
●
●
●
●
The door has not been closed. (“Door not closed. Please check”)
The plug is not properly inserted in the power socket.
There is no supply at the socket
The main fuse or the fuse in the plug has blown.
The selector dial is not correctly positioned and the Start/Pause button
has not been depressed.
The delay start has been selected.
Ensure the water tap is open. (“No incoming water. Check tap & hose”)
The filter in the inlet hose is blocked. (“No incoming water. Check
tap & hose”)
The inlet hose may be squashed or kinked. (“No incoming water.
Check tap & hose”)
The door has not been closed. (“Door not closed. Please check”)
The end of the drain hose is too low.
The end of the drain hose is submerged in water.
There is no vent in the end of the drain hose.
The drain hose may be squashed or kinked.
The option
,
or No Spin “0” has been selected.
The drain pump may be blocked.
The drain hose extension, if fitted, is not correct. Follow the
instructions for connecting to the waste.
The drainage system pipes are blocked.
The wash load is unbalanced: redistribute the clothes inside the drum to
allow the machine to spin.
Too much detergent or unsuitable detergent has been used (creates too
much foam).
Check whether there are any leaks from one of the inlet hose fittings. It
is not always easy to see this as the water runs down the hose; check to
see if it is damp.
The drain hose may be damaged or not securely positioned.
The detergent dispenser drawer or recess is clogged.
The drainage system pipes are blocked.
The cap on the emergency emptying hose has not been replaced after
cleaning the pump.
24
132982780.qxd
29/03/2006
15.08
Pagina
25
(Nero/Process Black pellicola)
Symptom
Possible causes
Unsatisfactory washing results
●
●
●
●
The machine vibrates when spinning
●
●
●
●
●
The door will not open
Too little detergent or unsuitable detergent has been used. An
insufficient amount of detergent leaves the laundry looking grey and
causes lime scale to form.
Stubborn stains have not been treated prior to washing
The correct wash programme has not been selected.
Too much laundry has been placed in the drum.
The internal packing has not been removed.
The machine is in contact with the wall or furniture.
The machine is not stable and level (check diagonally).
The washing load is badly distributed in the drum.
Maybe there is very little laundry in the drum.
●
The programme is still running.
The door lock has not yet released.
● Water in the tub: the door cannot be opened if water is present in the
tub.
The door can only be opened only when “Door openable” message
appears in the dispaly
●
Spinning starts late or the machine
does not spin
●
The electronic unbalance detection device has cut in because the
laundry is not evenly distributed in the drum. The laundry is
redistributed by reverse rotation of the drum. This may happen several
times before the unbalance disappears and normal spinning can resume.
If, after 6 minutes, the laundry is still not evenly distributed in the
drum, the machine will not spin. In this case, redistribute the load
manually and reselect the spin programme.
No water is visible in the drum
●
Machines based on modern technology operate very economically
using very little water without affecting performance.
Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Working”.
When you contact the Service Force Centre you will
need to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of fault
4. The model and serial number of the appliance (found
on the rating plate - see picture)
5. The purchase date.
Service & Spare Parts
In the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact your
local Service Force Centre by telephoning:
0870 5 929929
Your telephone call will be automatically routed to the
Service Force Centre covering your post code area.
For the address of your local Service Force Centre and
further information about Service Force, please visit the
website at www.serviceforce.co.uk.
For Customer Service in Ireland please contact us at the
address below:
Please note that a valid purchase receipt or
guarantee documentation is required for inguarantee service calls.
Mo
Pro d. .....
d.
No .....
. .....
.....
.
Ser
. No
. .....
....
Zanussi Electrolux - Electrolux Group (Irl) Ltd
Long Mile Road - Dublin 12 - Republic of Ireland
Tel: +353 (0)1 4090751
Email: [email protected]
To buy accessories, consumables and spare parts at
our online shop please visit: http://www.zanussielectrolux.co.uk
Mod. ..........
Prod. No. ...........
P0042 BD
25
Ser. No. .........
132982780.qxd
29/03/2006
15.08
Pagina
26
(Nero/Process Black pellicola)
Customer Care Department
Customer Care Department - Zanussi Electrolux
Major Appliances
Addington Way
Luton
Bedfordshire
LU4 9QQ
For general enquiries concerning your Zanussi
Electrolux appliance or for further information on
Zanussi Electrolux products, please contact our
Customer Care Department by letter or telephone at the
address below or visit our website at www.zanussi.co.uk
Tel 08705 727727*
* calls to this number may be recorded for training
purposes.
Guarantee Conditions
Standard guarantee conditions
●
We, Zanussi Electrolux, undertake that if, within 12
months of the date of the purchase, this ZANUSSI
ELECTROLUX appliance or any part thereof is proved
to be defective by reason only of faulty workmanship or
materials, we will, at our option repair or replace the
same FREE OF ANY CHARGE for labour, materials or
carriage on condition that:
● The appliance has been correctly installed and used
only on the electricity supply stated on the rating
plate.
● The appliance has been used for normal domestic
purposes only, and in accordance with the
manufacturer’s instructions.
● The appliance has not been serviced, maintained,
repaired, taken apart or tampered with, by any
person not authorised by us.
● All service work under this guarantee must be
undertaken by a Service Force Centre.
● Any appliance or defective part replaced shall
become the Company’s property.
● This guarantee is in addition to your statutory and
other legal rights.
Home visits are made between 8.30am and 5.30pm
Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged.
●
European guarantee
If you should move to another country within Europe
then your guarantee moves with you to your new home
subject to the following qualifications:
● The guarantee starts from the date you first
purchased your product.
● The guarantee is for the same period and to the same
extent for labour and parts as exists in the new
country of use for this brand or range of products.
● The guarantee relates to you and cannot be
transferred to another user.
● Your new home is within the European Community
(EC) or European Free Trade Area.
● The product is installed and used in accordance with
our instructions and is only used domestically, i.e. a
normal household.
● The product is installed taking into account
regulations in your new country.
Before you move please contact your nearest Customer
Care Centre, listed below, to give them details of your
new home. They will then ensure that the local Service
Organisation is aware of your move and able to look
after you and your appliances.
France
Senlis
+33 (0) 344 62 29 29
Germany
Nurnberg
+49 (0) 800 234 7378
Italy
Pordenone
+39 0434 39 4700
Sweden
Stockholm
+46 (0) 8 672 53 90
UK
Luton
+44 (0) 8705 727 727
Ireland
Dublin
+353 (0) 1 4090751
Exclusions
This guarantee does not cover:
●
●
Appliances found to be in use within a commercial
environment, plus those which are subject to rental
agreements.
Products of Zanussi Electrolux manufacture which
are NOT marketed by Zanussi Electrolux.
Damage or calls resulting from transportation,
improper use or neglect, the replacement of any light
bulbs or removable parts of glass or plastic.
Costs incurred for calls to put right an appliance
which is improperly installed or calls to appliances
outside the United Kingdom.
26
132982780.qxd
29/03/2006
15.08
Pagina
27
(Nero/Process Black pellicola)
Installation Instructions
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Should the appliance power supply cable need to
be replaced, this should be carried out by our
Service Force Centre.
Technical Specifications
DIMENSIONS
Height
Width
Depth
POWER SUPPLY VOLTAGE
TOTAL POWER ABSORBED
85 cm
60 cm
63 cm
230-240 V/50 Hz
2050 W (10A)
WATER PRESSURE
Minimum
Maximum
MAX LOAD CAPACITY
Cotton, linen
Synthetics
Delicate fabrics
Wool and handwash
Silk
SPIN SPEED
Maximum
CONSUMPTION DATA FOR WASHING
7 KG NORMALLY SOILED COTTON
ITEMS AT 60°C (PROGR. COTTONS
ECONOMY)
Energy
Water
Time
0.05 MPa (0.5 bar)
0.8 MPa (8.0 bar)
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
27
7
3
3
2
1
kg
kg
kg
kg
kg
1600 rpm
1.19 kWh
56 litres
109 minutes
132982780.qxd
29/03/2006
15.08
Pagina
28
(Nero/Process Black pellicola)
Unpacking
●
The transport safeguard must be removed before
putting the appliance into operation.
Important !
You are advised to keep all the packaging for re-use in
case the machine is to be transported again.
● After removing all the packaging, with assistance
carefully lay machine on it’s back to remove the
polystyrene base from the bottom.
● Remove the power supply cable and the draining hose
from the hose holders on the rear of the appliance.
Fill the smaller upper hole and the two large ones with
the corresponding plastic plug caps supplied in the
bag containing the instruction booklet.
HEC0005
HEC0009
Important!
All the different plug caps are supplied with the
appliance in the plastic bag containing the instruction
booklet.
● Connect the water inlet hose as described under the
paragraph “Water inlet”.
Positioning
HEC0001
HEC0008
●
With a suitable spanner unscrew and remove the
central rear bolt A. Slide out the relevant plastic
spacer.
●
Unscrew and remove the two large rear bolts B and
the six smaller bolts C.
A
HEC0002
Install the machine on a flat hard floor. Make sure that air
circulation around the machine is not impeded by carpets,
rugs etc. Check that the machine does not touch the wall or
other kitchen units.
Never place cardboard, wood or similar materials under the
machine to compensate for any unevenness in the floor.
Your new washing machine has been designed to be
permanently plumbed in to your home’s water supply
and drainage system. However, if this is not possible, it
may be connected to a suitable existing tap with the
drain hose discharging into a sink.
The appliance has an inlet hose, with female 3/4” BSP
thread connector. If this connection is not compatible
with the plumbing of the existing installation, a variety
of connectors are available from good hardware stores
and plumbers merchants to suit most domestic
plumbing. Any alteration to your existing plumbing
must be carried out by a competent person, or qualified
plumber.
C
HEC0003
C
B
D B
●
Remove the bracket D and tighten up the six smaller
bolts C.
●
Open the porthole and remove the plystyrene block
fitted with the adhesive tape on the door seal.
Installation on a Suspended Floor
HEC0011
Suspended wooden floors are particularly susceptible to
vibration. To help prevent vibration we recommend you
place a waterproof wood panel, at least 15 mm thick
under the appliance, secured to at least 2 floor beams
with screws. If possible install the appliance in one of
the corners of the room, where the floor is more stable.
HEC0010
28
132982780.qxd
29/03/2006
15.08
Pagina
29
(Nero/Process Black pellicola)
Water inlet
Water drainage
An inlet hose is supplied and can been found inside the
machine drum.
Do not use the hose from your previous machine to
connect to the water supply.
1. Open the porthole and extract the inlet hose .
2. Connect the hose with the angled connection to the
machine.
Important!
Do not place the inlet hose downwards. Angle the
hose to the left or right depending on the position of
your water tap.
This appliance is designed to be permanently plumbed
into your home's drainage system using one of the
following methods.
1. Into a drainage standpipe.
Firstly form a hook in the end of the drain hose using
the “U” piece” supplied.
“U” piece
supplied
P1199
Place the drain hose into your standpipe, which should
have an internal diameter of approximately 38mm thus
ensuring there is an air break between the drain hose
and standpipe.
HEC0006
3. Set the hose correctly by loosening the ring nut. After
positioning the inlet hose, be sure to tighten the ring
nut again to prevent leaks.
4. Connect the hose to a tap with a 3/4” thread. Always
use the hose supplied with the appliance.
30 cm (12")
38 mm (11.2”)
standpipe
diameter
HEC0013
When discharging into a standpipe ensure that the top of
the standpipe is no more than 90cm (35.4'') and no less
than 60cm (23.6'') above floor level.
P1088
Min. 60 cm (23.6”)
HEC0012
29
Max. 90 cm (35.4”)
3 pin
Installation should comply with local water authority
and building regulations’ requirements.
The appliance must be connected to a cold water
supply.
A minimum water pressure of 0.05 MPa (0.5 bar) is
required for safe operation of the appliance.
If you cannot make the cold water connection direct
from the rising mains, you may be able to operate the
appliance from your cold water storage system.
There should be a minimum distance of 5.02m
(16.5 ft) between the appliance’s inlet and the bottom of
the water storage tank.
132982780.qxd
29/03/2006
15.08
Pagina
30
(Nero/Process Black pellicola)
Levelling
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece is
available from your local Service Force Centre.
The joining piece must have an internal diameter of
18mm.
If your drain hose looks like this (see below) you do not
require the “U” piece”. Just push the hose firmly into
the standpipe.
Level the washing machine by raising or lowering the
feet. The feet may be tight to adjust as they incorporate
a self locking nut, but the machine MUST be level and
stable (check diagonally).
If necessary, check the setting with a spirit level.
HEC007
P1212
Any necessary adjustment can be made with a spanner.
Accurate levelling prevents vibration, noise and
displacement of the machine during operation.
Some vibration is inevitable, especially if mounted on a
wooden floor.
Sprung wooden floors are particularly susceptible to
vibration. For advice, consult a builder. If possible,
always place the machine on a solid floor.
2. Onto a sink outlet spigot.
If the outlet spigot has not been used before, remove
any blanking plug that may be in place.
Special conditions
If the floor is carpeted or covered with crumbly or soft
material, insert a rigid support base under the feet to
prevent noise, vibration or displacement. The base
should protrude a few centimetres beyond the edges of
the machine.
P1197
Push the drain hose onto the spigot and secure with a
clip if required, ensure a loop is formed in the drain
hose (see diagram) to prevent waste from the sink
entering the washing machine.
Warning
The machine should NOT be placed on deep pile
carpeting.
Note
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
breakdown.
Loop
In the interest of the environment
P1198
Washing machines and dishwashers should be
connected to the FOUL drainage system, the water will
then be taken to a sewage works for treatment before
being discharged safely into a river.
It is essential that these appliances are not connected to
the surface water drainage system as this water is
discharged directly into a river or stream and may cause
pollution.
Important
Before connecting the machine to new pipework or to
pipework that has not been used for some time, run off a
reasonable amount of water to flush out any debris that
may have collected in the pipes.
30
132982780.qxd
29/03/2006
15.08
Pagina
31
(Nero/Process Black pellicola)
f you require any further advice please contact your
local water authority.
Should the plug need to be replaced for any reason,
proceed as described below.
The wires in the mains lead are coloured in accordance
with the following code:
Green and Yellow
- Earth
Blue
- Neutral
Brown
- Live
GREEN & YELLOW
E
SHOWER
TOILET
BATH
13 A
SINK
BIDET
N
WASHING
MACHINE
L
BROWN
DISHWASHER
BLUE
RAINWATER
'RUN-OFF'
P1041
CORD CLAMP
FOUL DRAIN
SURFACE WATER
DRAINS & SEWERS
FOUL SEWERS
The wire coloured green and yellow must be connected
to the terminal marked with the letter «E» or by the
earth symbol
or coloured green and yellow.
The wire coloured blue must be connected to the
terminal marked «N» or coloured black.
The wire coloured brown must be connected to the
terminal marked «L» or coloured red.
Upon completion there must be no cut, or stray strands
of wire present and the cord clamp must be secure over
the outer sheath.
SEWAGE
TREATMENT
WORKS
UNTREATED
DISCHARGE
TREATED
DISCHARGE
RIVER
RIVER
P0987
Electrical connection
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
WARNING:
A cut off plug inserted into a 13 amp socket is
a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of
safely. Should the appliance power supply
cable neeed to be replaced, this must be carried
out by our Service Force Centre.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
The manufacturer declines any liability should
this safety measure not be observed.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance’s
rating plate. The rating plate is located at the top of the
rim of the open door.
Note
When the appliance is installed the power supply cable
must be accessible.
Permanent connection
Mo
Pro d. .....
d.
No .....
. .....
.....
.
Ser
. No
. .....
....
In the case of permanent connection it is necessary that
you install a double pole switch between the appliance
and the electricity supply (mains), with a minimum gap
of 3mm between the switch contacts and of a type
suitable for the required load in compliance with the
current electrical regulations.
The switch must not break the yellow and green earth
cable at any point.
Mod. ..........
Prod. No. ...........
P0042 BD
Ser. No. .........
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug
supplied, a 13amp ASTA approved (BS1363/A) fuse
must be used.
31
132982780.qxd
29/03/2006
15.08
Pagina
32
(Nero/Process Black pellicola)
From the Electrolux Group. The world’s No. 1 choice.
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use.
More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners,
chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries
around the world.
© Electrolux plc 2006