Draytek VigorPro 5500 Installation guide

VigorPro 5500 Series
Unified Security Firewall
Quick Start Guide
Version: 2.0
Date: 2007/05/02
Please visit www.draytek.com to get the newly updated manual at any time.
VigorPro 5500 Quick Start Guide
i
Copyright Information
Copyright
Declarations
Copyright 2007 All rights reserved. This publication contains information that is
protected by copyright. No part may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language without written
permission from the copyright holders. The scope of delivery and other details
are subject to change without prior notice.
Trademarks
The following trademarks are used in this document:
z
Microsoft is a registered trademark of Microsoft Corp.
z
Windows, Windows 95, 98, Me, NT, 2000, XP and Explorer are
trademarks of Microsoft Corp.
z
Apple and Mac OS are registered trademarks of Apple Computer Inc.
z
Other products may be trademarks or registered trademarks of their
respective manufacturers.
Safety Instructions and Approval
Safety
Instructions
Warranty
z
z
Read the installation guide thoroughly before you set up the router.
The router is a complicated electronic unit that may be repaired only be
authorized and qualified personnel. Do not try to open or repair the router
yourself.
z
Do not place the router in a damp or humid place, e.g. a bathroom.
z
The router should be used in a sheltered area, within a temperature range
of +5 to +40 Celsius.
z
Do not expose the router to direct sunlight or other heat sources. The
housing and electronic components may be damaged by direct sunlight or
heat sources.
z
Do not deploy the cable for LAN connection outdoor to prevent electronic
shock hazards.
z
Keep the package out of reach of children.
z
When you want to dispose of the router, please follow local regulations on
conservation of the environment.
We warrant to the original end user (purchaser) that the router will be free from
any defects in workmanship or materials for a period of two (2) years from the
date of purchase from the dealer. Please keep your purchase receipt in a safe
place as it serves as proof of date of purchase. During the warranty period, and
upon proof of purchase, should the product have indications of failure due to
faulty workmanship and/or materials, we will, at our discretion, repair or replace
the defective products or components, without charge for either parts or labor, to
whatever extent we deem necessary tore-store the product to proper operating
condition. Any replacement will consist of a new or re-manufactured
functionally equivalent product of equal value, and will be offered solely at our
discretion. This warranty will not apply if the product is modified, misused,
tampered with, damaged by an act of God, or subjected to abnormal working
conditions. The warranty does not cover the bundled or licensed software of
other vendors. Defects which do not significantly affect the usability of the
product will not be covered by the warranty. We reserve the right to revise the
manual and online documentation and to make changes from time to time in the
contents hereof without obligation to notify any person of such revision or
changes.
Be a Registered
Owner
Web registration is preferred. You can register your Vigor router via
http://www.draytek.com.
Firmware & Tools
Updates
Please consult the DrayTek web site for more information on newest firmware,
tools and documents. For more detailed information, please refer to
http://www.draytek.com.
Parts of the anti-virus features are powered by Kaspersky Lab ZAO. For more
detailed information, please refer to http://www.kaspersky.com.
ii
VigorPro 5500 Quick Start Guide
European Community Declarations
Manufacturer:
Address:
Product:
DrayTek Corp.
No. 26, Fu Shing Road, HuKou County, HsinChu Industrial Park, Hsin-Chu, Taiwan 303
VigorPro 5500
DrayTek Corp. declares that VigorPro 5500 Series is in compliance with the following essential
requirements and other relevant provisions of R&TTE Directive 1999/5/EEC.
The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive
89/336/EEC by complying with the requirements set forth in EN55022/Class A and EN55024/Class A.
The product conforms to the requirements of Low Voltage (LVD) Directive 73/23/EEC by complying with
the requirements set forth in EN60950.
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the use is encouraged to try to correct the interference
by one of the following measures:
z
Reorient or relocate the receiving antenna.
z
Increase the separation between the equipment and receiver.
z
Connect the equipment into an outlet on a circuit different form that to which the receiver is
connected.
z
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device may accept any interference received, including interference that may cause undesired
operation.
Taiwanese BSMI (Bureau of Standards, Metrology and Inspection) A Warning:
Warning: This device might cause interference of radio frequency under the environment of dwelling. In
such condition, the users might be asked to adopt some proper strategies.
Please visit “www.draytek.com/about_us/Regulatory.php”
This product is designed for the 2.4 GHz WLAN network throughout the EC region and Switzerland with
restrictions in France.
This is a class A product. In a domestic environment, this product may cause radio interference in which
case the user may be required to take adequate measures.
VigorPro 5500 Quick Start Guide
iii
Table of Contents
1. Introduction........................................................................................................... 1
1.1 Panel Explanation ...................................................................................................................... 2
1.1.1 For VigorPro 5500 .......................................................................................................... 2
1.1.2 For VigorPro 5500G ....................................................................................................... 3
1.1.3 For VigorPro 5500i ......................................................................................................... 4
1.1.4 For VigorPro 5500Gi....................................................................................................... 5
1.2 Package Content........................................................................................................................ 6
2. Installing Your Vigor Router................................................................................. 7
3. Configuring Web Pages ....................................................................................... 9
4. Registration for the Router ................................................................................ 13
4.1 Creating and Activating an Account from VigorPro Website .................................................... 13
4.2 Creating and Activating an Account from Router Web Configurator........................................ 17
4.3 Registering Your Vigor Router.................................................................................................. 22
4.4 Activating Anti-Virus/Anti-Intrusion/Anti-Spam Service ............................................................ 27
4.3.1 For Anti-Virus and Anti-Intrusion Service ..................................................................... 27
4.4.2 For Anti-Spam Service ................................................................................................. 32
4.5 Backup and Upgrade Signature for Anti-Intrusion/Anti-Virus ................................................... 39
4.6 Enabling Anti-Virus/Anti-Intrusion/Anti-Spam ........................................................................... 40
5. Trouble Shooting ................................................................................................ 43
5.1 Checking If the Hardware Status Is OK or Not......................................................................... 43
5.2 Checking If the Network Connection Settings on Your Computer Is OK or Not ...................... 43
5.3 Pinging the Router from Your Computer .................................................................................. 46
5.4 Checking If the ISP Settings are OK or Not ............................................................................. 47
5.5 Backing to Factory Default Setting If Necessary...................................................................... 49
5.6 Contacting Your Dealer ............................................................................................................ 50
iv
VigorPro 5500 Quick Start Guide
1. Introduction
VigorPro 5500 Series is an all-in-one Anti-Virus, Anti-Intrusion and Anti-Spam security
appliance for SOHO and branch office. VigorPro 5500 Series provides real-time network
protection against viruses, worms and malicious programs via e-mail, FTP and web browser. The
rule-based website content filtering blocks improper connection to internet in flexible way. With
DrayTek’s DrayOS™ as kernel, VigorPro 5500 Series provides robust and stable VPN, firewall
and routing functionality as well.
Unlike legacy proxy-based anti-virus anti-intrusion solution, which stores data in files format
prior to scan the content in streaming, the VigorPro 5500 equips with hardware-based scan engine.
VigorPro 5500 Series scans packet stream go through it in real-time before those specious content
get into the network without performance downgrade. Thus provides a protection of whole
network against any intrusion and malicious program in real-time.
DrayTek provides customer free access to the latest virus/hacker signature for and information
update for a period of time. Considering customer’s needs to minimize supporting effort, DrayTek
support team also provides service for VigorPro 5500 Series to get the latest signature updated
from DrayTek’s server automatically. The VigorPro 5500 Series family provides all-in-one
function for option: printer server service is available for customer’s alternative. The all-in-one
design makes network management simple and easy.
Features for VigorPro 5500 Series
y
y
y
Easy Internet-sharing of your broadband connection
Unified Security Firewall to help protect your network from external viruses and intrusions
Real-time virus/intrusion signature scanning with hardware-based scan engine to protect
your network
VigorPro 5500 Quick Start Guide
1
1.1 Panel Explanation
1.1.1 For VigorPro 5500
LED
Status
Explanation
ACT (Activity)
Blinking
Off
On
(Yellow)
On
(Yellow)
On
On
On
Off
On
The router is powered on and running normally.
The router is powered off.
The anti-virus function is enabled.
DMZ Host is specified in certain site.
LAN traffic monitor is active.
The VPN tunnel is launched.
The VPN tunnel is closed.
The QoS function is active.
On
Off
Blinking
On
Off
Blinking
On
Off
Blinking
On
Off
Blinking
The port is connected with 10Mbps.
The port is disconnected.
The data is transmitting.
The port is connected with 100Mbps.
The port is disconnected.
The data is transmitting.
The port is connected with 100Mbps.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is disconnected.
The data is transmitting.
Virus
IDP (Intrusion Detection and
Prevention)
DMZ
Monitor
VPN
QoS
The anti-intrusion function is enabled.
LED on Connector
10
(left LED)
WAN
100
(right LED)
LAN/Monitor
LAN
100
(left LED)
1000
(right LED)
Interface
Description
RST
(Factory Reset)
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for
more than 5 seconds. When you see the ACT LED begins to blink rapidly than
usual, release the button. Then the router will restart with the factory default
configuration.
Connecter for remote networked devices.
Connecter for local networked devices.
Connecter for local networked devices.
Connecter for a power cord with 100-240VAC (inlet).
WAN(1/2)
LAN/Monitor
LAN (1-4)
Power Switch. “1” is ON; “0” is OFF.
2
VigorPro 5500 Quick Start Guide
1.1.2 For VigorPro 5500G
LED
Status
Explanation
ACT (Activity)
Blinking
Off
On
(Yellow)
On
(Yellow)
On
On
On
Off
On
The router is powered on and running normally.
The router is powered off.
The anti-virus function is enabled.
DMZ Host is specified in certain site.
LAN traffic monitor is active.
The VPN tunnel is launched.
The VPN tunnel is closed.
The QoS function is active.
On
Blinking
Off
Wireless access point is ready.
Ethernet packets are transmitting over wireless LAN.
The WLAN function is inactive.
On
Off
Blinking
On
Off
Blinking
On
Off
Blinking
On
Off
Blinking
The port is connected with 10Mbps.
The port is disconnected.
The data is transmitting.
The port is connected with 100Mbps.
The port is disconnected.
The data is transmitting.
The port is connected with 100Mbps.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is disconnected.
The data is transmitting.
Virus
IDP (Intrusion Detection and
Prevention)
DMZ
Monitor
VPN
QoS
WLAN
The anti-intrusion function is enabled.
LED on Connector
10
(left LED)
WAN
100
(right LED)
LAN/Monitor
LAN
100
(left LED)
1000
(right LED)
Interface
Description
RST
(Factory Reset)
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for
more than 5 seconds. When you see the ACT LED begins to blink rapidly than
usual, release the button. Then the router will restart with the factory default
configuration.
Connecter for remote networked devices.
Connecter for local networked devices.
Connecter for local networked devices.
Connecter for a power cord with 100-240VAC (inlet).
WAN(1/2)
LAN/Monitor
LAN (1-4)
Power Switch. “1” is ON; “0” is OFF.
VigorPro 5500 Quick Start Guide
3
1.1.3 For VigorPro 5500i
LED
Status
Explanation
ACT (Activity)
Blinking
Off
Virus
On
(Yellow)
The router is powered on and running normally.
The router is powered off.
The anti-virus function is enabled.
IDP (Intrusion Detection and
Prevention)
DMZ
Monitor
VPN
On
(Yellow)
On
On
On
Off
On
QoS
ISDN
The anti-intrusion function is enabled.
DMZ Host is specified in certain site.
LAN traffic monitor is active.
The VPN tunnel is launched.
The VPN tunnel is closed.
The QoS function is active.
On
Blinking
The ISDN service function is active.
A successful connection on the ISDN BRI B1/B2
channel.
On
Off
Blinking
On
Off
Blinking
On
Off
Blinking
On
Off
Blinking
The port is connected with 10Mbps.
The port is disconnected.
The data is transmitting.
The port is connected with 100Mbps.
The port is disconnected.
The data is transmitting.
The port is connected with 100Mbps.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is disconnected.
The data is transmitting.
LED on Connector
10
(left LED)
WAN
100
(right LED)
LAN/Monitor
LAN
100
(left LED)
1000
(right LED)
Interface
Description
RST
(Factory Reset)
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for
more than 5 seconds. When you see the ACT LED begins to blink rapidly than
usual, release the button. Then the router will restart with the factory default
configuration.
Connect for NT1 (or NT1+) box provided by ISDN service provider.
Connecter for remote networked devices.
Connecter for local networked devices.
Connecter for local networked devices.
Connecter for a power cord with 100-240VAC (inlet).
ISDN
WAN(1/2)
LAN/Monitor
LAN (1- 4)
Power Switch. “1” is ON; “0” is OFF.
4
VigorPro 5500 Quick Start Guide
1.1.4 For VigorPro 5500Gi
LED
Status
Explanation
ACT (Activity)
Blinking
Off
Virus
On
(Yellow)
The router is powered on and running normally.
The router is powered off.
The anti-virus function is enabled.
IDP (Intrusion Detection and
Prevention)
DMZ
Monitor
VPN
On
(Yellow)
On
On
On
Off
On
QoS
WLAN
ISDN
The anti-intrusion function is enabled.
DMZ Host is specified in certain site.
LAN traffic monitor is active.
The VPN tunnel is launched.
The VPN tunnel is closed.
The QoS function is active.
On
Blinking
Off
On
Blinking
Wireless access point is ready.
Ethernet packets are transmitting over wireless LAN.
The WLAN function is inactive.
The ISDN service function is active.
A successful connection on the ISDN BRI B1/B2
channel.
On
Off
Blinking
On
Off
Blinking
On
Off
Blinking
On
Off
Blinking
The port is connected with 10Mbps.
The port is disconnected.
The data is transmitting.
The port is connected with 100Mbps.
The port is disconnected.
The data is transmitting.
The port is connected with 100Mbps.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is disconnected.
The data is transmitting.
LED on Connector
10
(left LED)
WAN
100
(right LED)
LAN/Monitor
LAN
100
(left LED)
1000
(right LED)
VigorPro 5500 Quick Start Guide
5
Interface
Description
RST
(Factory Reset)
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for
more than 5 seconds. When you see the ACT LED begins to blink rapidly than
usual, release the button. Then the router will restart with the factory default
configuration.
Connect for NT1 (or NT1+) box provided by ISDN service provider.
Connecter for remote networked devices.
Connecter for local networked devices.
Connecter for local networked devices.
Connecter for a power cord with 100-240VAC (inlet).
ISDN
WAN(1/2)
LAN/Monitor
LAN (1- 4)
Power Switch. “1” is ON; “0” is OFF.
1.2 Package Content
nQuick Start Guide
oCD
p Antenna for G models
qRJ-45 Cable (Ethernet) r RJ-45 to RJ-45 Cable
for i models
s The type of the power cord depends on the country that the router will be installed:
UK-type power cord
EU-type power cord
USA/Taiwan-type power cord
AU/NZ-type power cord
* The maximum power consumption is 12-15 Watt.
6
VigorPro 5500 Quick Start Guide
2. Installing Your Vigor Router
This section will guide you to install the router through hardware connection and configure the
router’s settings through web browser.
Before starting to configure the router, you have to connect your devices correctly.
1.
Connect the power cord to the router’s power port on the rear panel, and the other side into a
wall outlet.
2.
Power on the device by pressing down the power switch on the rear panel.
3.
The system starts to initiate. After completing the system test, the ACT LED will light up
and start blinking.
4.
Connect one end of an Ethernet cable (RJ-45) to one of the LAN ports of the router and the
other end of the cable (RJ-45) into the Ethernet port on your computer (that device also can
connect to other computers to form a small area network). The LAN LED will light up
according to the network card feature (10Mpbs or 100Mpbs) of the device that it connected.
5.
Connect a modem/router (depends on your requirement) to any WAN port of router with
Ethernet cable (RJ-45). The WAN1/WAN2 LED (down/up) will light up according to the
network card feature ((10Mpbs or 100Mpbs) of the device that it connected.
2
Power Switch
1
Power Cord
3
5
4
Internet
Cable/DSL Modem
or Media Converter
LAN
(For the detailed information of LED status, please refer to section 1.1.)
VigorPro 5500 Quick Start Guide
7
This page is left blank for remark if necessary.
8
VigorPro 5500 Quick Start Guide
3. Configuring Web Pages
The Quick Start Wizard is designed for you to easily set up your router for Internet access. You
can directly access the Quick Start Wizard via Web Configurator.
1.
Make sure your PC connects to the router correctly.
Notice: You may either simply set up your computer to get IP dynamically from the
router or set up the IP address of the computer to be the same subnet as the default
IP address of Vigor router 192.168.1.1. For the detailed information, please refer
to the later section - Trouble Shooting of the guide.
2.
Open a web browser on your PC and type http://192.168.1.1. A pop-up window will open to
ask for username and password. Do not type any word on the window and click OK for next
screen.
Notice: If you fail to access to the web configuration, please go to “Trouble
Shooting” for detecting and solving your problem.
3.
Now, the Main Screen will pop up. Click Quick Start Wizard.
Note: The home page will change slightly in accordance with the router you have.
VigorPro 5500 Quick Start Guide
9
10
4.
Enter the login password on the field of New Password and retype it on the field of
Confirm Password. Then click Next to continue.
5.
On the next page as shown below, please select the WAN interface that you use. Choose
Auto negotiation as the physical type for your router. Then click Next for next step.
6.
On the next page as shown below, please select the appropriate Internet access type
according to the information from your ISP. For example, you should select PPPoE mode if
the ISP provides you PPPoE interface. Then click Next for next step.
VigorPro 5500 Quick Start Guide
PPPoE: if you click PPPoE as the protocol, please manually enter the Username/Password
provided by your ISP. Then click Next.
PPTP: if you click PPTP, you will get the following page. Please type in all the information
originally provided by your ISP. Then click Next for next step.
Static IP: if you click Static IP, you will get the following page. Please type in all the
information originally provided by your ISP. Then click Next for next step.
VigorPro 5500 Quick Start Guide
11
DHCP: if you click DHCP, you will get the following page. Please type in all the
information originally provided by your ISP. Then click Next for next step.
7.
12
Now you can see the following screen. It indicates that the setup is complete. Different types
of connection modes will have different summary. Click Finish and then restart the router.
Afterward, you will enjoy surfing on the Internet.
VigorPro 5500 Quick Start Guide
4. Registration for the Router
Now you can surf on Internet freely. It is time to continue the registration and activation of your
router for using the functions of anti-intrusion, anti-virus and anti-spam.
To use the anti-intrusion, anti-virus and anti-spam features of VigorPro series router, you have to
create a new account, finish the registration for that account by using the router and complete the
registration for the Vigor router. After finishing the registration of the router, you can download
the newly update types and rules of anti-intrusion and anti-virus during the valid time of the
license key you purchased.
There are two ways to create and activate new account. One is created by accessing
www.vigorpro.com (refer to section 4.1), the other is from router’s web configurator (refer to
section 4.2).
After activating the new account, you have to register your router from router’s web configurator
(refer to section 4.3). Follow the steps listed below to finish the registration and activation.
4.1 Creating and Activating an Account from VigorPro
Website
To activate anti-virus/anti-intrusion/anti-spam function, you need to register an account on
www.vigorpro.com firstly. Please follow the steps below to create a new account.
1.
Open your browser with URL: www.vigorpro.com. Find the line of Not registered yet?.
Then, click the link Click here! to access into next page.
VigorPro 5500 Quick Start Guide
13
14
2.
Check to confirm that you accept the Agreement and click Accept.
3.
Type your personal information in this page and then click Continue.
VigorPro 5500 Quick Start Guide
4.
Choose proper selection for your computer and click Continue.
5.
Now you have created an account successfully.
6.
Check to see the confirmation email with the title of New Account Confirmation Letter
from www.vigorpro.com.
VigorPro 5500 Quick Start Guide
15
16
7.
Click the Activate my Account link to enable the account that you created. The following
screen will be shown to verify the register process is finished. Please click Login.
8.
When you see the following page, please type in the account and password (that you just
created) in the fields of UserName and Password. Then type the code in the box of
AuthCode according to the value displayed on the right side of it.
9.
Now, click Login. Your account has been activated.
VigorPro 5500 Quick Start Guide
4.2 Creating and Activating an Account from Router Web
Configurator
You, also can created and register a new account from the web configurator of the VigorPro
router.
1.
Open a web browser on your PC and type http://192.168.1.1. A pop-up window will open to
ask for username and password. Do not type any word on the window and click OK.
2.
From the router’s web page, please open System Maintenance >>Signature Upgrade. You
will see the following web page.
3.
Click the Activate link from the Signature Upgrade web page.
VigorPro 5500 Quick Start Guide
17
18
4.
A Re-login page will be shown on the screen.
5.
Locate and click Create an account now link on the bottom of this page. You will access
into the following page. Check the box below to confirm that you accept the Agreement and
click Accept.
VigorPro 5500 Quick Start Guide
6.
Type your personal information in this page and then click Continue.
7.
Choose proper selection for your computer and click Continue.
VigorPro 5500 Quick Start Guide
19
8.
Now you have created an account successfully.
9.
Check to see the confirmation email with the title of New Account Confirmation Letter
from www.vigorpro.com.
10. Click the Activate my Account link to enable the account that you created. The following
screen will be shown to verify the register process is finished. Please click Login.
20
VigorPro 5500 Quick Start Guide
11. When you see the following page, please type in the account and password (that you just
created) in the fields of UserName and Password. Then type the code in the box of
AuthCode according to the value displayed on the right side of it.
12. Now, click Login. Your account has been activated. And the following page will be shown
automatically.
DrayTek will maintain a database of MAC address/serial number of shipped
goods. Only products with shipping records can be registered. If your VigorPro
5500 cannot hook up to your account, please contact your reseller or DrayTek’s
technical support.
VigorPro 5500 Quick Start Guide
21
4.3 Registering Your Vigor Router
You have activated the new account for the router. Now, it is the time for you to register your
vigor router. There are two ways to register your vigor router. One is to register by opening
System Maintenance >>Signature Upgrade; the other is to register by using
Anti-Spam>>Profile Setting. Registering Vigor router should be done just for once. If the
router has been registered previously, the system will not allow you to register the router
again. After finishing the router registration, you can activate Anti-Virus, Anti-Intrusion and
Anti-Spam respectively.
From System Maintenance >>Signature Upgrade
22
1.
Open a web browser on your PC and type http://192.168.1.1. A pop-up window will open to
ask for username and password.
2.
From the router’s web page, please open System Maintenance >>Signature Upgrade. You
will see the following web page.
VigorPro 5500 Quick Start Guide
3.
Click the Activate link from the Signature Upgrade web page.
4.
A Re-login page will be shown on the screen. Please type the account and password that you
created previously. And click Login.
VigorPro 5500 Quick Start Guide
23
24
5.
The following page will be displayed after you logging in VigorPro server. From this page,
please click Add.
6.
When the following page appears, please type in Nick Name (for the router) and choose the
right purchase date from the popup calendar (it appears when you click on the box of
Purchase Date).
7.
After adding the basic information for the router, please click Submit.
VigorPro 5500 Quick Start Guide
8.
Now, your router information has been added to the database. Click OK to leave this web
page and return to My Product web page.
From Anti-Spam>>Profile Setting
1.
Open a web browser on your PC and type http://192.168.1.1. A pop-up window will open to
ask for username and password.
2.
From the router’s web page, please open Anti-Spam>>Profile Setting. You will see the
following web page.
3.
Click the Activate link from the Profile Setting web page.
VigorPro 5500 Quick Start Guide
25
26
4.
A Re-login page will be shown on the screen. Please type the account and password that you
created previously. And click Login.
5.
The following page will be displayed after you logging in VigorPro server. From this page,
please click Add.
VigorPro 5500 Quick Start Guide
6.
When the following page appears, please type in Nick Name (for the router) and choose the
right purchase date from the popup calendar (it appears when you click on the box of
Purchase Date).
7.
After adding the basic information for the router, please click Submit.
8.
Now, your router information has been added to the database. Click OK to leave this web
page and return to My Product web page.
4.4 Activating Anti-Virus/Anti-Intrusion/Anti-Spam Service
After registering your vigor router, you have to follow the steps listed below to activate
anti-virus/anti-intrusion/anti-spam service to obtain full security for your computer.
4.3.1 For Anti-Virus and Anti-Intrusion Service
1.
Open a web browser on your PC and type http://192.168.1.1. A pop-up window will open to
ask for username and password..
VigorPro 5500 Quick Start Guide
27
28
2.
From the router’s web page, please open System Maintenance >>Signature Upgrade. You
will see the following web page.
3.
Click the Activate link from the Signature Upgrade web page.
VigorPro 5500 Quick Start Guide
4.
A Re-login page will be shown on the screen. Please type the account and password that you
created previously. And click Login.
5.
On the web page of My Product, you can find a list of the devices that you add with the
above steps. Currently, you just have added VigorPro 5500. Please click the serial number
link.
6.
From the Device’s Service section, click the Activate buttons for AI-AV (Anti-Intrusion &
Anti-Virus) service.
VigorPro 5500 Quick Start Guide
29
7.
In this page, check the box of “I have read and accept the above Agreement”. The system
will find out the date for you to activate this version of service. Then, click Register.
Note: DT-DT means you can acquire the anti-intrusion and anti-virus services from
DrayTek Corporation.
30
VigorPro 5500 Quick Start Guide
8.
Next, the DrayTek Service Activation screen will be shown as the following.
(Above figure supposes you have not activated Anti-Spam yet.)
9.
Click Close.
10. Return to Signature Upgrade page of the router’s web configurator. The start date and
expire date for the license are shown in this page.
Now, you have finished all the procedure for activating Anti-Intrusion/Anti-Virus service for
your router.
If you want to select DT-KL service additionally, repeat step 11 to step 14. Both services will be
added into your router. You can apply any one of them for your router through the webpage.
Note: You are allowed to use this version (with anti-intrusion/anti-virus
features) for 30 days after you register for your router. In addition, you will be
informed with an e-mail before the expiry of this version.
VigorPro 5500 Quick Start Guide
31
4.4.2 For Anti-Spam Service
Please follow the steps below to activate Anti-Spam Service for your system.
Getting 30 Days of Free Charge
32
1.
Open a web browser on your PC and type http://192.168.1.1. A pop-up window will open to
ask for username and password.
2.
From the router’s web page, please open Anti-Spam>>Profile Setting. You will see the
following web page.
3.
Click the Activate link from the Profile Setting web page.
4.
A Re-login page will be shown on the screen. Please type the account and password that you
created previously. And click Login.
VigorPro 5500 Quick Start Guide
5.
On the web page of My Product, you can find a list of the devices that you add with the
above steps. Currently, you just have added VigorPro 5500. Please click the serial number
link.
6.
From the Device’s Service section, click the Activate buttons for AS (Anti-Spam) service.
7.
In this page, check the box of “I have read and accept the above Agreement”. The system
will find out the date for you to activate this version of service. Then, click Register.
VigorPro 5500 Quick Start Guide
33
Note: CTCH means you can acquire anti-spam service from Commtouch.
8.
Next, the DrayTek Service Activation screen will be shown as the following.
(Above figure supposes you have not activated Anti-Virus yet.)
9.
Click Close.
Now, you have finished all the procedure for activating Anti-Spam service for your router.
34
Note: You are allowed to use this version (with anti-spam features) for 30 days
after registeration for your router. In addition, you will be informed with an
e-mail before the expiry of this version.
VigorPro 5500 Quick Start Guide
Upgrade License for Anti-Spam
1.
Open a web browser on your PC and type http://192.168.1.1. A pop-up window will open to
ask for username and password.
2.
From the router’s web page, please open Anti-Spam>>Profile Setting. You will see the
following web page.
3.
Click the Activate link from the Profile Setting web page.
4.
A Re-login page will be shown on the screen. Please type the account and password that you
created previously. And click Login.
VigorPro 5500 Quick Start Guide
35
36
5.
On the web page of My Product, you can find a list of the devices that you add with the
above steps. Currently, you just have added VigorPro 5500. Please click the serial number
link.
6.
From the Device’s Service section, click the Upgrade buttons for AS (Anti-Spam) service.
VigorPro 5500 Quick Start Guide
7.
In this page, type the License Number stated on the Anti-Spam license card in the field of
License Number. Then, click Add License.
8.
Now, the license number will be displayed on the page immediately. Click Apply.
VigorPro 5500 Quick Start Guide
37
9.
In this page, check the box of “I have read and accept the above Agreement”. The system
will find out the date for you to activate this version of service. Then, click Comfirm.
10. Next, the DrayTek Service Activation screen will be shown as the following.
(Above figure supposes you have not activated Anti-Virus yet.)
11. Click Close to exit.
38
VigorPro 5500 Quick Start Guide
4.5 Backup and Upgrade Signature for Anti-Intrusion/Anti-Virus
You can get the most updated signature from DrayTek’s server if the license key of
anti-virus/anti-intrusion for the VigorPro 5500 is not expired. Before you upgrade the signature,
please check the validation information either from WEB user interface of VigorPro 5500 or
account information from www.vigorpro.com.
1.
Open a web browser on your PC and type http://192.168.1.1. A pop-up window will open to
ask for username and password. Do not type any word on the window and click OK.
2.
From the router’s web page, please open System Maintenance >>Signature Upgrade. You
will see the following web page.
3.
On Signature Upgrade web page, locate Backup and Download Now!!!.
VigorPro 5500 Quick Start Guide
39
Time for Backup
Before changing other license, it is suggested for you to backup the original signature first. To
backup current signature information with the filename vigorpro.sig, click Backup.
Time for Download
After changing other license, it is suggested for you to download newly update signature for your
router. To download newly update anti-intrusion and anti-virus from VigorPro website, please
click Download Now!!!.
Time for Import
Backup files can be imported whenever you want. To use a saved signature information, please
click Import.
In addition, users can specify certain time for executing the upgrade automatically by the router.
Remember to check the Schedule Update box and click OK to activate the time settings.
4.6 Enabling Anti-Virus/Anti-Intrusion/Anti-Spam
After applying an account, registering your account and router, you have to access into the web
page of Vigor router to enable Anti-Virus/Anti-Intrusion/Anti-Spam function. There are two ways
to enable it.
A. For the default rule of firewall, please open Firewall>>General Setup page. Check
the box of Enable for Anti-Intrusion and choose proper action (profile) from the
drop down list of Anti-Virus and Anti-Spam. Next, click OK to finish the procedure
of activation.
B. For specified filter rule (there are twelve filter sets in Firewall, and each set is
allowed to set seven filter rules), please check the box of Enable for Anti-Intrusion
and choose proper action (profile) from the drop down list of Anti-Virus/Anti-Spam.
Next, click OK to finish the procedure of activation.
40
VigorPro 5500 Quick Start Guide
If you do not check the Anti-Intrusion box and choose a proper profile for Anti-Virus/Anti-Spam,
you still cannot use the Anti-Intrusion/Anti-Virus/Anti-Spam function even if you finished all the
relational profiles configuration.
VigorPro 5500 Quick Start Guide
41
42
VigorPro 5500 Quick Start Guide
5. Trouble Shooting
This section will guide you to solve abnormal situations if you cannot access into the Internet
after installing the router and finishing the web configuration. Please follow sections below to
check your basic installation status stage by stage.
¾
Checking if the hardware status is OK or not.
¾
Checking if the network connection settings on your computer are OK or not.
¾
Pinging the router from your computer.
¾
Checking if the ISP settings are OK or not.
¾
Backing to factory default setting if necessary.
If all above stages are done and the router still cannot run normally, it is the time for you to
contact your dealer for advanced help.
5.1 Checking If the Hardware Status Is OK or Not
Follow the steps below to verify the hardware status.
1.
Check the power line and WLAN/LAN cable connections.
Refer to “2.1 Hardware Installation” for details.
2.
Turn on the router. Make sure the ACT LED blink once per second and the correspondent
LAN LED is bright.
3.
If not, it means that there is something wrong with the hardware status. Simply back to “2.1
Hardware Installation” to execute the hardware installation again. And then, try again.
5.2 Checking If the Network Connection Settings on Your
Computer Is OK or Not
Sometimes the link failure occurs due to the wrong network connection settings. After trying the
above section, if the link is stilled failed, please do the steps listed below to make sure the
network connection settings is OK.
VigorPro 5500 Quick Start Guide
43
For Windows
44
The example is based on Windows XP. As to the examples for other
operation systems, please refer to the similar steps or find support notes in
www.draytek.com.
1.
Go to Control Panel and then double-click on Network Connections.
2.
Right-click on Local Area Connection and click on Properties.
3.
Select Internet Protocol (TCP/IP) and then click Properties.
VigorPro 5500 Quick Start Guide
4.
Select Obtain an IP address automatically and Obtain DNS server address
automatically.
For MacOs
1.
Double click on the current used MacOs on the desktop.
2.
Open the Application folder and get into Network.
3.
On the Network screen, select Using DHCP from the drop down list of Configure IPv4.
VigorPro 5500 Quick Start Guide
45
5.3 Pinging the Router from Your Computer
The default gateway IP address of the router is 192.168.1.1. For some reason, you might need to
use “ping” command to check the link status of the router. The most important thing is that the
computer will receive a reply from 192.168.1.1. If not, please check the IP address of your
computer. We suggest you setting the network connection as get IP automatically. (Please refer
to the section 5.2)
Please follow the steps below to ping the router correctly.
For Windows
1.
2.
Open the Command Prompt window (from Start menu> Run).
Type command (for Windows 95/98/ME) or cmd (for Windows NT/ 2000/XP). The DOS
command dialog will appear.
3.
Type ping 192.168.1.1 and press [Enter]. It the link is OK, the line of “Reply from
192.168.1.1:bytes=32 time<1ms TTL=255” will appear.
4.
If the line does not appear, please check the IP address setting of your computer.
For MacOs (Terminal)
46
1.
Double click on the current used MacOs on the desktop.
2.
Open the Application folder and get into Utilities.
3.
Double click Terminal. The Terminal window will appear.
4.
Type ping 192.168.1.1 and press [Enter]. It the link is OK, the line of “64 bytes from
192.168.1.1: icmp_seq=0 ttl=255 time=xxxx ms” will appear.
VigorPro 5500 Quick Start Guide
5.4 Checking If the ISP Settings are OK or Not
Click WAN>>Internet Access group and then check whether the ISP settings are set correctly.
For PPPoE Users
1.
Check if the Enable option for PPPoE Link is selected.
2.
Check if Username and Password are entered with correct values that you got from your
ISP.
VigorPro 5500 Quick Start Guide
47
For Static IP/DHCP Users
1.
Check if the Enable option for Static or Dynamic IP is selected.
2.
Check if IP Address, Subnet Mask and Gateway are set correctly (must identify with the
values from your ISP) if you choose Specify an IP address.
For PPTP Users
48
1.
Check if the Enable option for PPTP Link is selected. And check the IP address for the
PPTP Server.
2.
Check if IP Address and Subnet Mask are set correctly (must identify with the values from
your ISP) if you choose Specify an IP address.
VigorPro 5500 Quick Start Guide
5.5 Backing to Factory Default Setting If Necessary
Sometimes, a wrong connection can be improved by returning to the default settings. Try to reset
the router by software or hardware.
Warning: After pressing factory default setting, you will loose all settings
you did before. Make sure you have recorded all useful settings before you
pressing. The password of factory default is null.
Software Reset
You can reset the router to factory default via Web page.
Go to System Maintenance and choose Reboot System on the web page. The following screen
will appear. Choose Using factory default configuration and click OK. After few seconds, the
router will return all the settings to the factory settings.
Hardware Reset
While the router is running (ACT LED blinking), press the RST button and hold for more than 5
seconds. When you see the ACT LED blinks rapidly, please release the button. Then, the router
will restart with the default configuration.
After restore the factory default setting, you can configure the settings for the router again to fit
your personal request.
VigorPro 5500 Quick Start Guide
49
5.6 Contacting Your Dealer
If the router still cannot work correctly after trying many efforts, please contact your dealer for
further help right away. For any questions, please feel free to send e-mail to
support@draytek.com.
50
VigorPro 5500 Quick Start Guide