Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: SMART2200CRMXL
SmartPro Line Interactive Compact Rackmount UPS System - Precision Protection for Network / Telecom
Wiring Closets and Reduced Depth Installations
Highlights
2200VA / 2.2kVA line interactive 4U rack / tower UPS with reduced mounting
depth of only 17.25 inches / high power factor 1900W capacity
Maintains sine-wave 120V nominal output over an input range of 83 to 145V
Network communications supported via USB port, serial port, SNMP/Web card
slot and EPO interface
Expandable runtime with optional external battery packs
Input: NEMA 5-20P (120V 20A) / Output: 4 NEMA 5-15/20R, 4 NEMA 5-15R
(120V)
2 year product warranty / $250,000 Ultimate Lifetime Insurance (USA, Puerto
Rico & Canada only)
Description
Tripp Lite's SmartPro Compact Rackmount Uninterruptible Power Supply (UPS) offers line interactive voltage regulation, network grade surge
suppression and long lasting battery support for critical network hardware during blackouts and extended power failures. Special reduced-depth
housing, larger internal batteries, higher rated wattage and included 2 post rackmount installation hardware makes these systems ideal for network
and telecom wiring closets and other limited-space installations. 97% line power mode efficiency saves operating costs over less efficient UPS
types. Runtime is expandable with optional BP48V48RT4U and BP48V24-2U reduced-depth external battery packs.
SMART2200CRMXL 4U rackmount 2200VA/1900 watt UPS offers battery-derived sine wave AC output during power failures and extreme voltage
variations. Line interactive Automatic Voltage Regulation (AVR) provides two levels of voltage boost during brownouts and one level of voltage cut
during overvoltage conditions to maintain regulated 120V nominal output over an input range of 83-145V. Includes NEMA 5-20P input plug, NEMA
5-15R and 5-15/20R output receptacles. Network management interfaces support simultaneous communications via USB port, DB9 serial port and
optional SNMP/Web management accessory card slot. Optional SNMPWEBCARD offers remote management and control of the UPS via direct
network connection. Additional ENVIROSENSE accessory, when used in conjunction with SNMPWEBCARD reports temperature, humidity and
status of up to two directly connected contact closure sensors. HID-compliant USB interface enables full integration with built-in power management
and auto shutdown features of Windows and Mac OS X. Supports detailed monitoring of equipment load levels, self-test data and utility power
conditions via all 3 network interfaces at once. Includes PowerAlert monitoring software with USB and serial cables. Emergency Power Off (EPO)
interface. Integrated 3-bank programmable PDU switching supports load shedding and remote-reboot of up to 3 individual connected devices.
3-stage metered current monitoring and battery charge status LEDs. Utility power and voltage regulation LEDs. Audible alarm. Self-test. 2-post
rackmount accessories included; 2-9USTAND tower stands and UPSRMRII 4 post rackmount kit available. Field-replaceable, hot-swappable internal
batteries and external battery packs. Attractive all-black color scheme. 2-year warranty and $250,000connected equipment insurance; extended
warranty and service contracts available.
Package Includes
SmartPro Compact 4U Rackmount UPS system
2 post rackmount installation brackets
USB and Serial Cabling
Owner's manual with warranty information
Features
Tripp Lite's SmartPro Compact Rackmount Uninterruptible Power Supply (UPS) offers line interactive voltage regulation, network grade
surge suppression and long lasting battery support for critical network hardware during blackouts and extended power failures
Special reduced-depth housing, larger internal batteries, higher rated wattage and included 2 post rackmount installation hardware makes
these systems ideal for network and telecom wiring closets and other limited-space installations
Runtime is expandable with optional BP48V48RT4U and BP48V24-2U reduced-depth external battery packs
SMART2200CRMXL 4U rackmount 2200VA/1900 watt UPS offers battery-derived sine wave AC output during power failures and extreme
voltage variations
Line interactive Automatic Voltage Regulation (AVR) provides two levels of voltage boost during brownouts and one level of voltage cut
during overvoltage conditions to maintain regulated 120V nominal output over an input range of 83-145V
Includes NEMA 5-20P input plug, NEMA 5-15R and 5-15/20R output receptacles
Network management interfaces support simultaneous communications via USB port, DB9 serial port and optional SNMP/Web
management accessory card slot
Optional SNMPWEBCARD offers remote management and control of the UPS via direct network connection
Additional ENVIROSENSE accessory, when used in conjunction with SNMPWEBCARD reports temperature, humidity and status of up to
two directly connected contact closure sensors
HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS
X
97% efficiency in line power mode offers substantially lower operating costs than lower efficiency UPS types
Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces at once
Includes PowerAlert monitoring software with USB and serial cables
Emergency Power Off (EPO) interface
Integrated 3-bank programmable PDU switching supports load shedding and remote-reboot of up to 3 individual connected devices
3-stage metered current monitoring and battery charge status LEDs; Utility power and voltage regulation LEDs; Audible alarm; Self-test
2-post rackmount accessories included; 2-9USTAND tower stands and UPSRMRII 4 post rackmount kit available
Field-replaceable, hot-swappable internal batteries and external battery packs
Attractive all-black color scheme
2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available
Specifications
OUTPUT
Output Volt Amp
Capacity (VA)
2200
Output kVA capacity
(kVA)
2.2
Output Watt Capacity
(watts)
1900
Output kW capacity
1.9
Output power factor
0.9
Nominal Output
Voltage(s) Supported
120V
Frequency compatibility
60 Hz
Output voltage
regulation (line mode)
-18%, +8%
Output voltage
regulation (Battery mode)
+/- 5%
Built-in UPS output
receptacles
4 5-15R outlet(s); 4 5-15/20R outlet(s)
Built-in controllable
switched load banks
Three switchable single-outlet 5-15R load banks
Basic PDU options
PDU1220 (1U / 13 5-15/20R outlets); PDUNV (1U / 2 C19, 12 C13 outlets); PDUV20 (0U / 12 5-15/20R outlets);
PDU40TDUAL (0U / 40 5-15/20R outlets)
Metered PDU options
PDUMH20 (1U / 13 5-15/20R outlets); PDUMH20AT (1U / 16 5-15/20R outlets)*; PDUMV20 (0U / 16 5-15/20R
outlets); PDUMV40 (0U / 32 5-15/20R outlets)
Switched PDU options
PDUMH20ATNET (1U / 16 5-15/20R outlets)*; PDUMV20NET (0U / 24 5-15/20R outlets)
External PDU
redundancy options
*Auto Transfer Switch features utilizing the secondary PDU input cord are compatible with Smart Online UPS
models only
Output AC waveform (AC
mode)
Sine wave
Output AC waveform
(battery mode)
Sine wave
INPUT
Rated input current (at
maximum load)
16A
Nominal Input Voltage(s)
Supported
120V AC
UPS input connection
type
5-20P
Input circuit breaker
20A
UPS Input cord length
(ft.)
10
UPS Input cord length
(m)
3
Recommended Electrical
Service
20A 120V
BATTERY
Full load runtime
(minutes)
11 min. (1900w)
Half load runtime
(minutes)
28 min. (950w)
Expandable battery
runtime
Extended runtime supported via optional external battery packs
External battery pack
compatibility
BP48V24-2U (limit 1); BP48V48RT4U (multi-pack compatible)
DC system voltage (VDC)
48
Battery recharge rate
(included batteries)
Less than 3.6 hours from 10% to 90%
Replacement battery
cartridge (internal UPS
battery replacement)
RBC54 (quantity 2)
Battery Access
Front panel battery access door
Battery replacement
description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation
description
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
Overvoltage correction
Input voltages between 127 and 145 are reduced by 12%
Undervoltage correction
Input voltages between 96 and 108 are boosted by 12%
Severe undervoltage
correction
Input voltages between 83 and 95 are boosted by 24%
LEDS ALARMS & SWITCHES
LED Indicators
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Alarms
Audible alarm indicates power-failure, overload and low-battery conditions
Alarm cancel operation
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
Switches
2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches
support low/high charger settings
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
570
UPS AC suppression
response time
Instantaneous
EMI / RFI AC noise
suppression
Yes
PHYSICAL
Installation form factors
supported with included
accessories
2 post 19 inch rackmount (mounting rail kit included)
Installation form factors
supported with optional
accessories
4 post rackmount (4POSTRAILKIT); Tower (2-9USTAND)
Primary form factor
Rackmount
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / inches)
7 x 18 x 17.2
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / cm)
17.8 x 45.7 x 43.8
Installed whole system
total rack space height
(rack spaces)
4U
Secondary form factor
Tower (requires 2-9USTAND)
Installed whole system
dimensions in secondary
form factor (height x
width x depth / inches)
18 x 7 x 17.2
UPS dimensions in
secondary form factor
(height x width x depth /
cm)
45.7 x 17.8 x 43.8
UPS / Power Module
weight (lbs)
100.3
UPS / Power Module
weight (kg)
45.5
UPS Shipping
dimensions (height x
width x depth / inches)
12.8 x 23.3 x 22.8
UPS Shipping
dimensions (height x
width x depth / cm)
32.4 x 59.1 x 57.8
Shipping weight (lbs)
128.9
Shipping weight (kg)
58.5
UPS housing material
Steel
Cooling method
Fan
ENVIRONMENTAL
Operating Temperature
Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature
Range
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity
0 to 95%, non-condensing
AC mode BTU / hr. (full
load)
199.8
Battery mode BTU / hr.
(full load)
880.9
COMMUNICATIONS
Communications
interface
USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
Network monitoring port
description
Supports detailed monitoring of UPS and site power conditions
PowerAlert software
Included
Communications cable
USB and DB9 cabling included
WatchDog compatibility
Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer time
5.5 milliseconds
Low voltage transfer to
battery power (setpoint)
83
High voltage transfer to
battery power (setpoint)
145
SPECIAL FEATURES
Cold Start (startup in
battery mode during a
power failure)
Cold-start operation supported
High availability UPS
features
Hot swappable batteries
Green & high efficiency
features
Greater than 95% efficiency - GREEN UPS; Individually controllable load banks
CERTIFICATIONS
UPS Certifications
Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A
(EMI); ROHS (Reduction of Hazardous Substances)
WARRANTY
Product Warranty Period
(U.S., Canada & Puerto
Rico)
2 years
Connected Equipment
Insurance (U.S., Canada
& Puerto Rico)
$250,000 connected equipment insurance
Related Items
Optional Products
Product Type
Related Model
Description
Qty.
SNMP Accessories
SNMPWEBCARD
For remote monitoring and control via SNMP, Web, or Telnet.
-
SNMP Accessories
ENVIROSENSE
Monitors temperature, humidity and contact-closure inputs. (Requires
SNMPWEBCARD or switched PDU.)
-
Tower Stands
2-9USTAND
Enables Tower Placement of Rackmount UPS Systems
-
Rackmount/Wallmount Kits
4POSTRAILKIT
Enables 4-Post Rackmount Installation of Select Rackmount UPS
Systems
-
External Battery Packs
BP48V24-2U
BP48V242U - External Battery Pack for UPS System
-
External Battery Packs
BP48V48RT4U
Shallow-Depth External Battery Pack For UPS Systems
-
Extended Warranties
WEXT3-2200-3000
3-Year Extended Warranty - For Smart Line-Interactive and Online
Tower or Rack models, 2200-3000VA
-
Extended Warranties
WEXT5-2200-3000
5-Year Extended Warranty - For Smart Line-Interactive and Online
Tower or Rack models, 2200-3000VA or less
-
Power Distribution
PDUB20
Dual source Power Distribution Unit / PDU with Manual Transfer Switch
enables Hot-swappable UPS Replacement in Critical Network
Applications
-
Power Distribution
PDU1220
Basic PDU / Power Distribution Unit - Safe, reliable power distribution
for critical networking equipment
-
Power Distribution
PDUMH20
Metered PDU / Power Distribution Unit- Safe, reliable power
distribution with digital current meter
-
Power Distribution
PDUMV20
Metered PDU / Power Distribution Unit - Safe, reliable power
distribution with digital current meter
-
Power Distribution
PDUMNH20
Monitored PDU / Power Distribution Unit supports real-time remote
monitoring of load level, voltage and frequency with options for remote
environmental and security monitoring
-
Power Distribution
PDUMNV20
Monitored PDU / Power Distribution Unit supports real-time remote
monitoring of load level, voltage and frequency with options for remote
environmental and security monitoring
-
Power Distribution
PDUMH20ATNET
Switched, Metered PDU with ATS - Power Distribution Unit with
dual-input Auto Transfer Switching, individual outlet control and SNMP
network interface
-
Power Distribution
PDUMV20NET
Switched, Metered PDU with Remote Monitoring - 0U Vertical
Rackmount Power Distribution Unit for Networks with Individually
Switchable Outlets, Current Metering, Remote Monitoring and Control
-
Software
WATCHDOGSW
WatchDog Service Monitoring / Reboot Software
-
Power Cables
P007-002
2-ft. Heavy-Duty 14AWG Power cord
(IEC-320-C13 to NEMA 5-15P)
-
Power Cables
P007-006
6-ft. Heavy-Duty 14AWG Power cord
(IEC-320-C13 to NEMA 5-15P)
-
Power Cables
P007-010
10-ft. Heavy-Duty 14AWG Power cord
(IEC-320-C13 to NEMA 5-15P)
-
Power Cables
P044-06I
6-inch 12AWG Heavy Duty Power Adapter cord
(NEMA-L5-20R to NEMA-5-20P)
-
Power Cables
P049-010
10-ft. 12AWG Heavy Duty Power cord
(IEC-320-C19 to NEMA 5-20P)
-
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=3825.
Copyright © 2010 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.
Download PDF

advertising