LIQUID CRYSTAL DISPLAY MODULE MODEL: NMTC-S16205DRGHS Customer’s No.: None.

LIQUID CRYSTAL DISPLAY MODULE MODEL: NMTC-S16205DRGHS Customer’s No.: None.
Messrs. Standard
Product Specification
Model:
NMTC-S16205DRGHS
Rev. No.
Issued Date.
Page.
A
July. 01, 07
1 / 19
LIQUID CRYSTAL DISPLAY MODULE
MODEL: NMTC-S16205DRGHS
Customer’s No.: None.
Acceptance
Microtips Technology Inc.
12F. No.31 Lane 169, Kang Ning St.,
His-Chih, Taipei Hsien, Taiwan, R.O.C.
FAX: 886-2-26958625
Approved and Checked by
Approved by
Checked by
Made by
微 端
微 端
微 端
微 端
2007/07/3
李剛
2007/07/3
蔡宜夢
2007/07/3
連俊傑
溫欣達
200707/3
王淑芬
Messrs. Standard
Product Specification
Model:
NMTC-S16205DRGHS
Rev. No.
Issued Date.
Page.
A
July. 01, 07
2 / 19
Revise Records
Rev.
Date
Contents
Written
Approved
A
2007/7/3
Initial Edition
Fanny wong
Danny Lian
Special Notes
Note1.
Note2.
Note3.
Note4.
Note5.
The LCD module is compliant with RoHS.
Messrs. Standard
Product Specification
Model:
NMTC-S16205DRGHS
Rev. No.
Issued Date.
Page.
A
July. 01, 07
3 / 19
Contents
1. General Specifications .............................................................................................................................4
2. Electrical Specifications ..........................................................................................................................5
2.1 Absolute Maximum Ratings ...........................................................................................................5
2.2 DC Characteristics ..........................................................................................................................5
2.3 AC Characteristics ..........................................................................................................................6
3. Optical Specifications..............................................................................................................................8
3.1 LCD Driving Voltage......................................................................................................................8
3.2 Optical Characteristics....................................................................................................................8
3.3 Definition of Viewing Angle and Optimum Viewing Area ...........................................................8
3.4 Definition of Viewing Angle θf and θb ...........................................................................................9
3.5 Definition of Contrast C .................................................................................................................9
4. I/O Terminal...........................................................................................................................................10
4.1 Pin Assignment .............................................................................................................................10
4.2 Example of Power Supply ............................................................................................................10
4.3 Block Diagram..............................................................................................................................11
5. Reliability Test.......................................................................................................................................12
5.1 Test Item .......................................................................................................................................12
5.2 Judgment Standard........................................................................................................................12
6. Appearance Standards ...........................................................................................................................14
6.1 Inspection Conditions ...................................................................................................................14
6.2 Definition of Applicable Zones ....................................................................................................14
6.3 Standards.......................................................................................................................................15
7. Handling and Precautions ......................................................................................................................17
8. Warranty: ...............................................................................................................................................18
9. Dimensional Outlines ............................................................................................................................18
Messrs. Standard
Product Specification
Model:
NMTC-S16205DRGHS
Rev. No.
Issued Date.
Page.
A
July. 01, 07
4 / 19
1. General Specifications
Operating Temperature.
:
Min. -20°C ~ Max. 70°C
Storage Temperature.
:
Min. -30°C ~ Max. 80°C
Display Format
:
16 characters x 2 lines
Display Fonts
:
5 x 7 dots + cursor ( 1 character )
Viewing Area
:
69.0 (W) x 16.4 (H) mm
Outline Dimensions
:
80.0(W) x 36.0 (H) x 9.5 max. (D) mm
Weight
:
N/A
LCD Type
:
STN / Positive, Yellow-Green mode / Reflective
Viewing Direction
:
6:00
Backlight
:
None
LCD LSI
:
SPLC780C
Drawings
:
As attached drawings
Messrs. Standard
Product Specification
2.
Model:
NMTC-S16205DRGHS
Rev. No.
Issued Date.
Page.
A
July. 01, 07
5 / 19
Electrical Specifications
2.1 Absolute Maximum Ratings
VSS = 0V
Parameter
Supply Voltage (Logic)
Supply Voltage (LCD Drive)
Input Voltage
Symbol
Conditions
Min.
Max.
Units
VDD - VSS
--
- 0.3
7.0
V
VLCD
--
VDD -15.0
VDD + 0.3
V
VI
--
- 0.3
VDD + 0.3
V
2.2 DC Characteristics
Ta = 25°C, VSS = 0V
Parameter
Symbol
Conditions
Min.
Typ.
Max.
Units
Supply Voltage (Logic)
VDD - VSS
--
4.5
--
5.5
V
Supply Voltage (LCD Drive)
VDD - VO
Shown in 3.1
V
High Level (Input Voltage)
VIH
VDD = 5.0V
2.2
--
VDD
V
Low Level (Input Voltage 0
VIL
VDD = 5.0V
-0.3
--
0.6
V
High Level (Output Voltage)
VOH
IOH = -0.205mA
2.4
--
VDD
V
Low Level (Output Voltage)
VOL
IO L= 1.2mA
0
--
0.4
V
Supply Current
IDD
VDD - VSS =
5.0V
--
1.5
5.0
mA
Ta = 25°C, VSS = 0V
Parameter
Symbol
Conditions
Min.
Typ.
Max.
Units
Supply Voltage (Logic)
VDD - VSS
--
2.7
--
4.5
V
Supply Voltage (LCD Drive)
VDD - VO
High Level (Input Voltage)
VIH
Shown in 3.1
VDD = 3.0V
0.7 VDD
V
--
VDD
V
Low Level (Input Voltage)
VIL
VDD = 3.0V
-0.3
--
0.55
V
High Level (Output Voltage)
VOH
IOH = -0.1mA
0.75 VDD
--
VDD
V
Low Level (Output Voltage)
VOL
IOL=
0
--
0.2 VDD
V
Supply Current
IDD
--
1.5
5.0
mA
0.1mA
VDD - VSS =
5.0V
Messrs. Standard
Product Specification
Model:
NMTC-S16205DRGHS
Rev. No.
Issued Date.
Page.
A
July. 01, 07
6 / 19
2.3 AC Characteristics
VDD = 4.5V~5.5V
Parameter
Symbol
Conditions
Min.
Max.
Units
Enable Cycle Time
tCYC
Fig.1, 2
500
--
ns
Enable Pulse Width
PWEH
Fig.1, 2
230
--
ns
Enable Rise/Fall Time
tEr, tEf
Fig.1, 2
--
20
ns
tAS
Fig.1, 2
40
--
ns
Address Hold Time
tAH
Fig.1, 2
10
--
ns
Write Data Setup Time
tDSW
Fig.1
80
--
ns
Write Data Hold Time
tDHW
Fig.1
10
--
ns
Read Data Delay Time
tDDR
Fig.2
--
120
ns
Read Data Hold Time
tDHR
Fig.2
5
--
ns
Address Setup Time
VDD = 2.7V~4.5V
Parameter
Symbol
Conditions
Min.
Max.
Units
Enable Cycle Time
tCYC
Fig.1, 2
1000
--
ns
Enable Pulse Width
PWEH
Fig.1, 2
450
--
ns
Enable Rise/Fall Time
tEr, tEf
Fig.1, 2
--
25
ns
Address Setup Time
tAS
Fig.1, 2
60
--
ns
Address Hold Time
tAH
Fig.1, 2
20
--
ns
Write Data Setup Time
tDSW
Fig.1
195
--
ns
Write Data Hold Time
tDHW
Fig.1
10
--
ns
Read Data Delay Time
tDDR
Fig.2
--
360
ns
Read Data Hold Time
tDHR
Fig.2
5
--
ns
Messrs. Standard
Product Specification
Model:
RS
NMTC-S16205DRGHS
VIL
VIL
Page.
A
July. 01, 07
7 / 19
tAH
VIL
PWEH
tEr
E
Issued Date.
VIH
VIL
VIH
VIL
tAS
RW
Rev. No.
VIH
tEf
VIH
tDSW
VIH
VIL
DB0 - DB7
VIL
tDHW
Valid Data
VIL
VIH
VIL
tCYC
Fig.1 Write Operation Timing
RS
RW
VIH
VIL
VIH
VIL
tAS
tAH
VIH
VIH
PWEH
tEr
E
VIL
VIH
tEf
VIH
tDDR
DB0 - DB7
VIL
tDHR
VOH
VOH
VOL Valid Data VOL
tCYC
Fig.2 Read Operation Timing
VIL
Messrs. Standard
Product Specification
3.
Model:
NMTC-S16205DRGHS
Rev. No.
Issued Date.
Page.
A
July. 01, 07
8 / 19
Optical Specifications
3.1 LCD Driving Voltage
Parameter
Recommended LCD
Driving Voltage Note 1
Symbol
VDD-VO
Conditions
Min.
Typ.
Max.
Units
Ta = -20 °C
--
4.80
4.95
V
Ta = 25 °C
--
4.50
--
V
Ta = 70 °C
4.05
4.20
-V
Voltage (Applied actual waveform to LCD panel) for the best contrast. The range of minimum and
maximum shows tolerance of the operating voltage. The specified contrast ratio and response time are
not guaranteed over the entire range.
Note 1 :
3.2 Optical Characteristics
Ta=25 °C, 1/16 Duty, 1/5 Bias, VDD = 5.0V (Note 4), θ = 0°, φ = --°
Parameter
Symbol
Conditions
Min.
Typ.
Max.
Units
Contrast Ratio Note 1
CR
θ = 0°, φ = 0°
--
7
--
--
Viewing Angle
(Shown in 3.3)
Front-Back
θf - θb, φ = 0°
-45
to
+35
deg.
Left-Right
θl - θr, φ = 0°
-30
to
+30
deg.
TON
--
--
250
750
ms
Response
Time
Note 1 :
Note 2 :
Note 3 :
Note 4 :
Rise Note 2
Decay Note 3
TOFF
--300
900
ms
Contrast ratio is defined as follows.
CR = LOFF / LON
LON : Luminance of the ON segments, LOFF : Luminance of the OFF segments
The time that the luminance level reaches 90% of the saturation level from 0% when ON signal is
applied.
The time that the luminance level reaches 10% of the saturation level from 100% when OFF signal is
applied.
Definition of Driving Voltage VD. Assuming that the typical driving waveforms shown below are
applied to the LCD Panel at /A Duty - 1/B Bias ( A : Duty Number, B : Bias Number ). Driving voltage
VD is defined s follows: VD = (Vth1+Vth2) / 2
Vth1 :
The voltage VO-P that should provide 50% of the saturation level in the luminance at the
segment which the ON signal is applied to.
Vth2 :
The voltage VO-P that should provide 50% of the saturation level in the luminance at the
segment which the OFF signal is applied to.
Vop
1 / (fF x A)
Selected state
(ON SIGNAL)
3.3 Definition of Viewing Angle and Optimum Viewing Area
1 / fF
Unselected state
(OFF SIGNAL)
(B-2) x Vop / B
Messrs. Standard
Product Specification
Model:
NMTC-S16205DRGHS
Rev. No.
Issued Date.
Page.
A
July. 01, 07
9 / 19
Normal Line
θ=0ο
θ : Viewing Angle
φ : Viewing Direction
θR
θL
θF
9 O'clock
φ L= 180 ο
12 O'clock
φ B= 90 ο
θB
3 O'clock
φ R= 0 ο
φ
6 O'clock
φ F= 270 ο
3.4 Definition of Viewing Angle θf and θb
Cmax.
2.0
θf
θb
Viewing angles θ ( φ fixed)
Optimum viewing angle with the naked
eye and viewing angle θ at Cmax.
Above are not always the same.
3.5 Definition of Contrast C
C= Brightness of selected dot (B1 )/ Brightness of unselected dot (B2)
(%)
B1
Dark
unselected portion brightness
curve (bias voltage applied)
Brightness
selected portion
brightness curve
B2
Bright
Operation Voltage (V)
Messrs. Standard
Product Specification
NMTC-S16205DRGHS
Rev. No.
Issued Date.
Page.
A
July. 01, 07
10 / 19
I/O Terminal
4.1 Pin Assignment
No.
Symbol
Level
Function
1
VSS
-
Power Supply (0V, GND)
2
VDD
-
Power Supply for Logic
3
VEE (Vo)
-
Power Supply for LCD Drive
4
RS
H/L
Register Select Signal
5
R/W
H/L
Read/Write Select Signal H : Read L : Write
6
E
H/L
Enable Signal (No pull-up Resister)
7
DB0
H/L
Data Bus Line / Non-connection at 4-bit operation
8
DB1
H/L
Data Bus Line / Non-connection at 4-bit operation
9
DB2
H/L
Data Bus Line / Non-connection at 4-bit operation
10
DB3
H/L
Data Bus Line / Non-connection at 4-bit operation
11
DB4
H/L
Data Bus Lin
12
DB5
H/L
Data Bus Line
13
DB6
H/L
Data Bus Line
14
DB7
H/L
Data Bus Line
15
LEDA
--
No Connection
16
LEDK
--
No Connection
4.2 Example of Power Supply
It is recommended to apply a potentiometer for the contrast adjust due to the tolerance of the driving voltage and its
temperature dependence.
VDD
VDD (+Voltage)
R1
Module
4.
Model:
Vo
VR
R2
VEE (-Voltage)
VSS
VSS (0V)
R1+R2+VR=10 ~ 20K Ω
Tr=2SA1202 or equivalent
Messrs. Standard
Product Specification
Model:
NMTC-S16205DRGHS
Rev. No.
Issued Date.
Page.
A
July. 01, 07
11 / 19
4.3 Block Diagram
~
DB7
COM 16
8
16characters x 2 lines
DB0
E
Control LS
SEG 40
SPLC 780C
R/W
RS
LCD
SEG 40
or equivalent
4
Column Driver
SPLC100A2
or equivalent
VDD
VSS
VEE
Bias Circuit
To LSI
Messrs. Standard
Product Specification
5.
Model:
NMTC-S16205DRGHS
Rev. No.
Issued Date.
Page.
A
July. 01, 07
12 / 19
Reliability Test
5.1 Test Item
No change on display and in operation under the following test condition.
No.
Test Item
1.
High Temperature
(Operation)
Durability test under long time high
temperature with electrical stress (voltage,
current)
70°C ± 2°C 96hrs
2.
High Temperature
(Storage)
Durability test under long time high
temperature storage
80°C ± 2°C 96hrs
4
3.
Low Temperature
(Operation)
Durability test under long time low
temperature with electrical stress (voltage,
current)
-20°C ± 2°C, 96hrs
3
4.
Low Temperature
(Storage)
Durability test under long time low
temperature storage
-30°C ± 2°C, 96hrs
3, 4
Damp Proof Test
Durability test under long time high
temperature and high humidity
40°C± 2°C, 90~95%
RH 96hrs
3,4
Vibration Test
Total fixed amplitude: 1.5mm
Vibration frequency: 10~55Hz
One cycle 60 seconds to 3 directions of X, Y,
Z for each 15 minutes
--
5
5.
6.
Description
Condition
Note
To be measured after dropping from 60cm high on the concrete surface
in packing state.
F
Dropping method corner dropping
A corner: once
7.
Drop Test
E
G
D
C
A
B
Edge dropping
B, C, D edge: once
Face dropping
60cm
E, F, G face: once
Concrete Surface
Note 1: Unless otherwise specified, tests will be conducted under the following condition,
Temperature
: 25°C ± 2°C
Humidity
: 65% ± 5%
Note 2: Unless otherwise specified, tests will be not conducted under functioning state.
Note 3: No dew condensation to be observed.
Note 4: The function test shall be conducted after 4 hours storage at the normal temperature and humidity after
removed from the test chamber.
Note 5: Vibration test will be conducted to the product itself without putting it in a container.
5.2 Judgment Standard
Messrs. Standard
Product Specification
Model:
NMTC-S16205DRGHS
Rev. No.
Issued Date.
Page.
A
July. 01, 07
13 / 19
Test Item
Failure Mode
Judgment Standard
1
2
3
4
5
Orientation
*
*
*
*
*
No remarkable degradation of appearance under
bias/ non-bias condition
Current Value (IAC)
*
*
*
*
*
No remarkable increase
Contrast
*
*
*
*
No remarkable poor contrast
Domain
*
*
*
*
*
Less than 20% of all dots have reverse tilt of
more than on third of one dot area.
Bubble (Inside Cell)
*
*
*
*
*
*
As per “Appearance Standard” (Note. Including one which disappear after 25°C 2H)
Polarizer
*
*
*
As per “Appearance Standard” no remarkable
appearance change
Glass Damage
6
7
*
As per “Appearance Standard”
Note. 1. * is strong linkage between Failure Mode and Test Item.
2. Number of Test Item should be referred to former page.
3. Judgment and Standard value should be fixed by other inspection standard and criteria samples.
Messrs. Standard
Product Specification
6.
Model:
NMTC-S16205DRGHS
Rev. No.
Issued Date.
Page.
A
July. 01, 07
14 / 19
Appearance Standards
6.1 Inspection Conditions
The LCD shall be inspected under 40W white fluorescent light. The distance between the eyes and the sample shall
be more than 30cm. All directions for inspecting the sample should be within 45° against perpendicular line.
45
O
6.2 Definition of Applicable Zones
A Zone
Bezel Frame
B Zone
C Zone
A Zone : Active display area
B Zone : Area from outside of "A Zone" to validity viewing area
C Zone : Rest parts
A Zone + B Zone = Validity viewing area
Messrs. Standard
Product Specification
Model:
NMTC-S16205DRGHS
Rev. No.
Issued Date.
Page.
A
July. 01, 07
15 / 19
6.3 Standards
No.
Parameter
Criteria
(1) Round Shape
Zone
Dimension (mm)
1.
Black and White
Spots, Foreign
Substances
Acceptable Number
A
B
C
D
≤ 0.1
*
*
*
0.1
< D
≤ 0.2
3
5
*
0.2
< D
≤ 0.25
2
3
*
0.25
< D
≤ 0.3
0
1
*
0.3
< D
0
0
*
D = (Long + Short)/2 *: Disregard
(2) Line Shape
Zone
Zone
Y (mm)
A
B
C
*
*
*
≥ L
≥ L
≥ W
0.05 ≥ W
0.1 ≥ W
3
3
*
3
3
*
--
0.1
X (mm)
-2.0
1.0
Acceptable Number
0.03
< W
In the same way (1)
X : Length Y: Width *: Disregard
Total defects shall not exceed 5.
Zone
Dimension (mm)
2.
Air Bubbles
(between glass &
polarizer)
A
B
C
D
≤ 0.3
*
*
*
0.3
<
D
≤ 0.4
3
*
*
0.4
<
D
≤ 0.6
2
3
*
0.6
<
D
0
0
*
*: Disregard
Total defects shall not exceed 3.
To be continued……
Acceptable Number
Messrs. Standard
Product Specification
No.
Model:
NMTC-S16205DRGHS
Parameter
Rev. No.
Issued Date.
Page.
A
July. 01, 07
16 / 19
Criteria
(1) Dot Shape (with Dent)
0.15 ≥
As per the sketch of left
hand.
(2) Dot Shape (with Projection)
Should not be connected to
next dot.
(3) Pin Hole
X
3.
The Shape of Dot
Y
(X+Y)/2 ≤ 0.2mm (Less than
0.1mm is no counted.)
(4) Deformation
(X+Y)/2 ≤ 0.2mm
Y
X
Total acceptable number: 1/dot, 5/cell
(Defect number of (4): 1pc.)
4.
Polarizer Scratches
5.
Polarizer Dirts
6.
Complex Foreign
Substance Defects
7.
Distance between
different Foreign
Substance defects
Not to be conspicuous defects.
I f the stains are removed easily from LCDP surface, the module
is not defective.
Black spots, line shaped foreign substance or air bubbles between
glass & polarizer should be 5pcs maximum in total.
D ≤ 0.2 : 20mm or more
0.2 < D : 40mm or more
Messrs. Standard
Product Specification
7.
Model:
NMTC-S16205DRGHS
Rev. No.
Issued Date.
Page.
A
July. 01, 07
17 / 19
Handling and Precautions
The Following precautions will guide you in handling our product correctly.
1
Liquid crystal display devices
1.1
1.2
2
Care of the liquid crystal display module against static electricity discharge.
2.1
2.2
2.3
3
The liquid crystal display device panel used in the liquid crystal display module is made of
plate glass. Avoid any strong mechanical shock. Should the glass break handle it with care.
The polarizer adhering to the surface of the LCD is made of a soft material. Guard against
scratching it.
When working with the module, be sure to ground your body and any electrical equipment
you may be using. We strongly recommend the use of anti static mats ( made of rubber ), to
protect work tables against the hazards of electrical shock.
Avoid the use of work clothing made of synthetic fibers. We recommend cotton clothing or
other conductivity-treated fibers.
Slowly and carefully remove the protective film from the LCD module, since this operation
can generate static electricity.
When the LCD module alone must be stored for long periods of time:
3.1
3.2
3.3
Protect the modules from high temperature and humidity.
Keep the modules out of direct sunlight or direct exposure to ultra-violet rays.
Protect the modules from excessive external forces.
4
Use the module with a power supply that is equipped with an over current protector circuit, since the
module is not provided with this protective feature.
5
Do not ingest the LCD fluid itself should it leak out of a damaged LCD module. Should hands or
clothing come in contact with LCD fluid, wash immediately with soap.
6
Conductivity is not guaranteed for models that use metal holders where solder connections between
the metal holder and the PCB are not used. Please contact us to discuss appropriate ways to assure
conductivity.
Messrs. Standard
Product Specification
8.
Model:
NMTC-S16205DRGHS
Rev. No.
Issued Date.
Page.
A
July. 01, 07
18 / 19
Warranty:
This product has been manufactured to your company’s specifications as a part for use in your company’s general
electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from
general electronic equipment, we cannot take responsibility if the product is used in medical devices, nuclear
power control equipment, aerospace equipment, fire and security systems, or any other applications in which there
is a direct risk to human life and where extremely high levels of reliability are required. If the product is to be used
in any of the above applications, we will need to enter into a separate product liability agreement.
9.
1
We cannot accept responsibility for any defect, which may arise from additional manufacturing of the product
(including disassembly and reassembly), after product delivery.
2
We cannot accept responsibility for any defect, which may arise after the application of strong external force
to the product.
3
We cannot accept responsibility for any defect, which may arise due to the application of static electricity
after the product has passed your company’s acceptance inspection procedures.
4
We cannot accept responsibility for industrial property, which may arise through the use of your product, with
exception to those issues relating directly to the structure or method of manufacturing of our product.
Microtips-origin longer than one year from Microtips production.
Dimensional Outlines
z
See the next page……..
Messrs. Standard
Product Specification
Model:
NMTC-S16205DRGHS
Rev. No.
Issued Date.
Page.
A
July. 01, 07
19 / 19
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Microtips Technology:
NMTC-S16205DRGHS
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement