EN
User manual
Washing Machine
ZWF 12380W
ZWF 14380W
Downloaded From WashingMachine-Manual.com Manuals
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Personalisation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2
4
4
7
7
7
9
Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _
What to do if ... _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Environmental concerns _ _ _ _ _ _ _ _ _ _ _ _ _
11
14
17
18
18
20
24
Subject to change without notice
Safety information
Important! Read carefully and keep for future reference.
• The safety of your appliance complies with the industry standards and with legal requirements on the safety of appliances. However, as manufacturers, we feel
it is our duty to provide the following safety notes.
• It is most important that this instruction book should
be retained with the appliance for future reference.
Should the appliance be sold or transferred to another owner, or should you move house and leave the
appliance, always ensure that the book is supplied
with the appliance in order that the new owner can
get to know the functioning of the appliance and the
relevant warnings.
• You MUST read them carefully before installing or using the appliance.
• Before first starting up, check the appliance for any
damage incurred during transport. Never connect up
a damaged appliance . If parts are damaged, contact
your supplier.
• If the appliance is delivered in the winter months
when there are minus temperatures. Store it at room
temperature for 24 hours before using for the first time.
General safety
• It is dangerous to alter the specifications or attempt
to modify this product in any way.
• During high temperature wash programmes the door
glass may get hot. Do not touch it!
• Make sure that small pets and children do not climb
into the drum. To avoid this, please check into the
drum before using.
• Any objects such as coins, safety pins, nails, screws,
stones or any other hard, sharp material can cause
•
•
•
•
•
extensive damage and must not be placed into the machine.
Only use the advised quantities of fabric softener and
detergent. Damage to the fabric can ensue if you overfill. Refer to the manufacturer’s recommendations of
quantities.
Wash small items such as socks, laces, washable
belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub
and the inner drum.
Do not use your washing machine to wash articles
with whalebones, material without hems or torn material.
Always unplug the appliance and turn off the water
supply after use, cleaning and maintenance.
Under no circumstances should you attempt to repair
the machine yourself. Repairs carried out by inexperienced people may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts.
Installation
• This appliance is heavy. Care should be taken when
moving it.
• When unpacking the appliance, check that it is not
damaged. If in doubt, do not use it and contact the
Service Centre.
• All packing and transit bolts must be removed before
use. Serious damage can occur to the product and to
property if this is not adhered to. See relevant section in the user manual.
• After having installed the appliance, check that it is
not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable against
the wall.
Downloaded
From WashingMachine-Manual.com Manuals
2
• If the machine is situated on a carpeted floor, please
adjust the feet in order to allow air to circulate freely
under the appliance.
• Always be sure, that there is no water leakage from
hoses and their connections after the installation.
• If the appliance is installed in a location subject to
frost, please read the “dangers of freezing” chapter.
• Any plumbing work required to install this appliance
should be carried out by a qualified plumber or competent person.
• Any electrical work required to install this appliance
should be carried out by a qualified electrician or competent person.
Use
• This appliance is designed for domestic use. It must
not be used for purposes other than those for which
it was designed.
• Only wash fabrics which are designed to be machine
washed. Follow the instructions on each garment label.
• Do not overload the appliance. See the Washing Programme Table.
• Before washing, ensure that all pockets are empty
and buttons and zips are fastened. Avoid washing
frayed or torn articles and treat stains such as paint,
ink, rust, and grass before washing. Underwired bras
must NOT be machine washed.
• Garments which have been in contact with volatile petroleum products should not be machine washed. If
volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.
• Never pull the power supply cable to remove the
plug from the socket; always take hold of the plug itself.
• Never use the appliance if the power supply cable,
the control panel, the working surface or the base are
damaged so that the inside of the washing machine
is accessible.
Child safety
• This appliance is not intended for use by persons (including children) with reduced physical sensory or
mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children’s reach
• Keep all detergents in a safe place out of children’s
reach.
• Make sure that children or pets do not climb into the
drum. To prevent children and pets becoming trapped inside the drum this machine incorporates a special feature.
To activate this device, rotate the button (without
pressing it) inside the
door clockwise until the
groove is horizontal. If
necessary use a coin.
Downloaded From WashingMachine-Manual.com Manuals
To disable this device
and restore the possibility of closing the door, rotate the button anti-clockwise until the groove is
vertical.
3
Product description
1
2
3
4
5
6
Detergent dispenser drawer
Control panel
Door opening handle
Rating plate
Drain pump
Adjustable feet
1
2
3
4
5
6
Detergent dispenser drawer
Compartment for detergent used for prewash and
soak phase or for stain remover used during the stain
action phase (if available). The prewash and soak detergent is added at the beginning of the wash programme.
The stain remover is added during the stain action phase.
Compartment for powder or liquid detergent used
for main wash. If using liquid detergent pour it just before starting the programme.
Compartment for liquid additives (fabric softener,
starch).
Follow the product manufacturer’s recommendations on
quantities to use and do not exceed the «MAX» mark in
the detergent dispenser drawer. Any fabric softener or
starching additives must be poured into the compartment before starting the wash programme.
Control panel
On the following page there is a picture of the control panel. It shows the programme selector dial as well as
the buttons, pilot lights and the display. These are presented by relevant numbers on the following pages.
Downloaded
From WashingMachine-Manual.com Manuals
4
1
1
2
3
4
Programme selector dial
SPIN reduction button
OPTIONS button
EXTRA RINSE button
2
3
5
6
7
8
4
5
6
7
8
Display
START/PAUSE button
DELAY START button
Indicator pilot lights
Table of symbols
Night Cycle
Child Safety Lock
Rinse Hold
Programme selector dial, spin speed button and available options
Programme Selector Dial
Rinse hold
It allows you to switch the appliance on/off and/or to select a programme.
By selecting this function the water of the last rinse is
not emptied out to prevent the fabrics from creasing. Before opening the door it will be necessary to empty out
the water. To empty out the water, please read the paragraph «At the end of the programme».
Spin Reduction
By pressing this button you can change the spin speed
of the selected programme.
Available options:
Night Cycle
By selecting this function the machine will not drain the
water of the last rinse and all spinning phases will be
suppressed, so as not to wrinkle the laundry. This washing cycle is very quiet and it can be selected at night or
in times with a more economical power rate. On some
programmes the rinses will be performed with more water. Before opening the door it will be necessary to empty out the water. To empty out the water, please read the
paragraph «At the end of the programme».
Prewash
By selecting this option the machine performs a prewash cycle before the main wash phase. The washing
time will be prolonged. This option is recommended for
heavily soiled laundry.
Intensive
Select this option for heavily soiled laundry. The washing cycle intensity will be increased and the washing
time will be prolonged by a few minutes depending on
the type of fabric.
Downloaded From WashingMachine-Manual.com Manuals
5
Super Quick
5 Display
A very short cycle for lightly soiled items or for laundry
which needs only freshening up. We recommend that
you reduce the amount of fabric you load.
Extra Rinse
This appliance is designed to save energy. If it necessary to rinse the laundry using an extra quantity of water
(extra rinse), select this option. Some additional rinses
will be performed. This option is recommended for people who are allergic to detergents, and in areas where
the water is very soft.
5.2
5.3
5.1
Start Pause
This button allows you to start or to interrupt the selected programme.
Delay Start
The programme can be delayed from 30 min - 60 min 90 min, 2 hours and then by 1 hour up to a maximum
of 20 hours by means of this button.
Indicator pilot light (8)
8.1
8.2
8.3
After having pressed the
button 6 the light 8.1
(Wash) and 8.2 (Door) illuminate to indicate that
appliance is working and
the door is locked.
The light 8.2 (Door) indicates if the door can be opened:
• The light is on: the door cannot be opened.
• The light is off: the door can be opened.
• The light is flashing: the door is unlocking and
soon can be opened.
The light 8.3 (End) illuminates at the end of the washing cycle.
The display shows the following information:
5.1:
• Duration of the selected programme
After selecting a programme, the duration is dis).
played in hours and minutes (for example
The duration is calculated automatically on the basis
of the maximum recommended load for each type of
fabric. After the programme has started, the time remaining is updated every minute.
• Alarm codes
In the event of operating problems, some alarm co(see parades can be displayed, for example
graph «What to do if...»).
• Incorrect option selection
If an option which is not compatible with the set
wash programme is selected, the message Err is displayed at the bottom of the display for a few seconds
and the integrated red light of button 6 start flashing.
• End of programme
When the programme has finished three flashing ze) are displayed, the pilot light 8.3 and
ros (
the pilot light of button 6 go out and the door can be
opened.
• Delayed start
The Selected delay set by pressing the relevant button appears on the display for a few seconds, then
the duration of the selected programme is displayed
again. The delay time value decreases by one unit every hour and then, when 1 hour remains, every minute.
5.2:
• Heating phase
Downloaded
From WashingMachine-Manual.com Manuals
6
During the washing cycle the display shows a temperature icon to indicate that the appliance has started
the heating phase of the water in the tub.
5.3:
• Child safety lock
This device permits you to leave the appliance unattended during it's functioning.
First use
• Ensure that the electrical and water connections comply with the installation instructions.
• Remove the polystyrene block and any material from
the drum.
• Before the first wash, run a cotton cycle at the highest temperature without any laundry in the machine,
to remove any manufacturing residue from the drum
and tub. Pour 1/2 a measure of detergent into the
main wash compartment and start the machine.
Personalisation
Acoustic signals
The machine is provided with an acoustic device, which
sounds in the following cases:
• at the end of the cycle
• if there is a fault.
By pressing the 2 and 3 buttons simultaneously for
about 6 seconds , the acoustic signal is deactivated (except if there is a fault). By pressing these 2 buttons
again, the acoustic signal is reactivated.
Child safety lock
This device permits you to leave the appliance unattended so you do not need to worry that children might be
injured by or cause damage to the appliance. This function remains enabled also when the washing machine is
not working.
There are two different ways to set this option:
1. Before pressing button 6 : it will be impossible to
start the machine.
2. After pressing button 6 : it will be impossible to
change any other programme or option.
To enable or disable this option press simultaneously
for about 6 seconds buttons 3 and 4 until on the disappears or disappears.
play, the icon
Daily use
Load the laundry
Measure out the detergent and the fabric softener
Open the door by carefully pulling the door handle
outwards. Place the laundry in the drum, one item
at a time, shaking them
out as much as possible.
Close the door.
Downloaded From WashingMachine-Manual.com Manuals
7
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent required, pour it into the
main wash compartment or in the appropriate compartment if the selected programme/option it requires
(see more details in "Detergent dispenser drawer").
If required, pour fabric softener into the compartment
(the amount used must not exceed the
marked
«MAX» mark in the drawer). Close the drawer gently.
Select the required programme by turning the
programme selector dial (1)
Turn the programme selector dial to the required programme. The green pilot light of the button 6 starts to
flash.
The selector dial can be turned either clockwise or counterclockwise. Turn to position « Off » to reset programme/ switch the machine off.
At the end of the programme the selector dial must be
turned to position «Off» , to switch the machine off.
Caution! If you turn the programme selector dial
to another programme when the machine is
working, the red pilot light of button 6 will blink 3
times to indicate a wrong selection. The machine will
not perform the new selected programme.
Select the spin speed, the Night Cycle or the
Rinse Hold option by pressing button 2
The washing machine will automatically select the maximum spin value provided for the programme you have
chosen. (See "Washing programmes" for the maximum
allowed spin speed).
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a different speed.
The relevant light will light up.
Select the available options by means of buttons 3
and 4
Depending on the programme, different options can be
combined. These must be selected after choosing the desired programme and before starting the programme.
When these buttons are pressed, the corresponding pilot lights illuminate. When they are pressed again, the
pilot lights go out. If an incorrect option is selected, the
integrated red pilot light of the button 6 flashes 3 times
and the message Err is displayed.
For the compatibility among the washing programmes
and the options see chapter «Washing programmes» .
Select the Delay Start by pressing button 7
Before you start the programme, if you wish to delay the
start, press this button to select the desired delay.
The selected delay time value will appear on the display
for a few seconds, then the duration of the programme
will appear again.
You must select this option after you have set the programme and before you start the programme.
You can cancel or modify the delay time at any moment,
before you press button 6 .
Selecting the Delay Start:
1. Select the programme and the required options.
2. Select the delay start by pressing button 7 .
3. Press button 6 :
- the machine starts its hourly countdown.
- the programme will start after the selected delay
has expired.
Cancelling the Delay Start after having started the programme:
1. Set the washing machine to PAUSE by pressing button 6 .
2. Press button 7 once until symbol ' appears on
the display.
3. Press button 6 again to start the programme.
Important!
• The selected delay can be changed only after selecting the washing programme again.
• The door will be locked throughout the delay time. If
you need to open the door, you must first set the washing machine to PAUSE by pressing button 6 and wait
a few minutes before opening the door. After you
have closed the door, press the same button again.
Important! The Delay Start cannot be selected with
DRAIN programme.
Start the programme by pressing button 6
To start the selected programme, press this button; the
corresponding green pilot light stops blinking.
The pilot light Wash ( 8.1 ) and Door ( 8.2 ) illuminate
to indicate that the appliance starts operating and the
door is locked.
If you have chosen a delayed start, the machine will begin the countdown.
Important! If an incorrect option is selected, the
message Err is displayed for a few seconds and the red
pilot light of this button blinks 3 times.
Downloaded
From WashingMachine-Manual.com Manuals
8
Altering an option or a running programme
It is possible to change some options before the programme carries them out.
Before you make any change, you must PAUSE the appliance by pressing the button 6 .
Changing a running programme is possible only by resetting it. Turn the programme selector dial to Off and
then to the new programme position. Start the new programme by pressing the button 6 again. The washing
water in the tub will be not emptied out.
Interrupting a programme
Press the button 6 to interrupt a programme which is
running, the corresponding green pilot light starts blinking.
Press the button again to restart the programme.
Cancelling a programme
Turn the selector dial to Off position to cancel a programme which is running. Now you can select a new programme.
Opening the door
After the programme has started the door is locked. If,
for any reason, you need to open it, set firstly the machine to PAUSE by pressing the button 6 . After a few
minutes the pilot light 8.2 goes off and the door can be
opened.
If the door remains locked, this means that the machine
is already heating or that the water level is too high. In
any case, do not try to force the door open!
If you cannot open the door but you need to open it you
have to switch the machine off by turning the selector
Stand by : once the programme has finished after a few
minutes the energy saving system will be enabled. The
brightness of the display is reduced. By pressing any
dial to Off position. After a few minutes the door can be
opened (pay attention to the water level and temperature!) .
After closing the door, it is necessary to select the programme and options again and to press button 6 .
At the end of the programme
The machine stops automatically. The three blinking ze) appear on the display, the pilot light of
ros (
button 6 goes off and after a few minutes the 8.2 pilot
light goes off. The light 8.3 illuminates and some acoustic signals sound. The door can be opened.
If a programme or an option that ends with water left in
the tub has been selected, the light 8.2 illuminates and
the door remains locked to indicate that the water must
be emptied out before opening the door.
Follow the below instructions to empty out the water:
1. Turn the programme selector dial to Off .
2. Select the draining or spinning programme.
3. Reduce the spin speed if needed, by pressing the
relevant button.
4. Press button 6 .
At the end of the programme, the door can be now
opened. Turn the programme selector dial to Off to
switch the machine off.
Remove the laundry from the drum and carefully check
that the drum is empty. If you do not intend to carry out
another wash, close the water tap. Leave the door open
to prevent the formation of mildew and unpleasant smells.
button the appliance will come out of the energy saving
status.
Helpful hints and tips
Sorting out the laundry
Follow the wash code symbols on each garment label
and the manufacturer’s washing instructions. Sort the
laundry as follows: whites, coloureds, synthetics, delicates, woollens.
Before loading the laundry
Never wash whites and coloureds together. Whites may
lose their «whiteness» in the wash.
New coloured items may run in the first wash; they
should therefore be washed separately the first time.
Button up pillowcases, close zip fasteners, hooks and
poppers. Tie any belts or long tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special detergent or
detergent paste.
Treat curtains with special care. Remove hooks or tie
them up in a bag or net.
Downloaded From WashingMachine-Manual.com Manuals
9
Removing stains
Stubborn stains may not be removed by just water and
detergent. It is therefore advisable to treat them prior to
washing.
Blood: treat fresh stains with cold water. For dried
stains, soak overnight in water with a special detergent
then rub in the soap and water.
Oil based paint: moisten with benzine stain remover, lay
the garment on a soft cloth and dab the stain; treat several times.
Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be careful with rust stains which
are not recent since the cellulose structure will already
have been damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well (whites and
fast coloureds only).
Grass: soap lightly and treat with bleach (whites and
fast coloureds only).
Ball point pen and glue: moisten with acetone1), lay the
garment on a soft cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat
stains with methylated spirits. Treat any residual marks
with bleach.
Red wine: soak in water and detergent, rinse and treat
with acetic or citric acid, then rinse. Treat any residual
marks with bleach.
Ink: depending on the type of ink, moisten the fabric
first with acetone1), then with acetic acid; treat any residual marks on white fabrics with bleach and then rinse
thoroughly.
Tar stains: first treat with stain remover, methylated spirits or benzine, then rub with detergent paste.
Detergents and additives
Good washing results also depend on the choice of detergent and use of the correct quantities to avoid waste
and protect the environment.
Although biodegradable, detergents contain substances
which, in large quantities, can upset the delicate balance of nature.
The choice of detergent will depend on the type of fabric
(delicates, woollens, cottons, etc.), the colour, washing
temperature and degree of soiling.
All commonly available washing machine detergents
may be used in this appliance:
• powder detergents for all types of fabric
• powder detergents for delicate fabrics (60°C max)
and woollens
• liquid detergents, preferably for low temperature
wash programmes (60°C max) for all types of fabric,
or special for woollens only.
The detergent and any additives must be placed in the
appropriate compartments of the dispenser drawer before starting the wash programme.
If using liquid detergents, a programme without prewash must be selected.
Your appliance incorporates a recirculation system
which allows an optimal use of the concentrated detergent.
Follow the product manufacturer’s recommendations on
quantities to use and do not exceed the «MAX» mark in
the detergent dispenser drawer .
Quantity of detergent to be used
The type and quantity of detergent will depend on the
type of fabric, load size, degree of soiling and hardness
of the water used.
Follow the product manufacturers’ instructions on quantities to use.
Use less detergent if:
• you are washing a small load
• the laundry is lightly soiled
• large amounts of foam form during washing.
Degrees of water hardness
Water hardness is classified in so-called “degrees” of
hardness. Information on hardness of the water in your
area can be obtained from the relevant water supply company, or from your local authority. If the water hardness
degree is medium or high we suggest you to add a water softener following always the manufacturer’s instructions. When the degree of hardness is soft, readjust the
quantity of the detergent.
1) do not use acetone on artificial silk
Downloaded
From WashingMachine-Manual.com Manuals
10
Washing programmes
Programme - Maximum and Minimum Temperature - Cycle
Description - Maximum Spin Speed - Maximum Fabrics
Load - Type of Laundry
Cottons
90°
Main wash - Rinses
Maximum spin speed 1200 rpm for model ZWF 12380W
(1400 for model ZWF 14380W )
Max. load 7 kg - Reduced load 3,5 kg
White and fast coloured cotton (heavily or normally soiled
items).
Options
SPIN
NIGHT CYCLE
RINSE HOLD
PREWASH
INTENSIVE
SUPER QUICK 1)
EXTRA RINSE
2)
SPIN
NIGHT CYCLE
RINSE HOLD
PREWASH
EXTRA RINSE
2)
SPIN
NIGHT CYCLE
RINSE HOLD
PREWASH
INTENSIVE
SUPER QUICK 1)
EXTRA RINSE
2)
SPIN
NIGHT CYCLE
RINSE HOLD
PREWASH
EXTRA RINSE
2)
Cottons Eco
60°
Main wash - Rinses
Maximum spin speed 1200 rpm for model ZWF 12380W
(1400 for model ZWF 14380W )
Max. load 7 kg
White and fast coloured cotton. This programme can be selected for normally soiled cotton items. The temperature will decrease and the washing time will be extended. This allows to
obtain a good washing efficiency by saving energy.
Cottons
60° - 40°
Main wash - Rinses
Maximum spin speed 1200 rpm for model ZWF 12380W
(1400 for model ZWF 14380W )
Max. load 7 kg - Reduced load 3,5 kg
Coloured cotton (normally and lightly soiled items).
Detergent drawer
Cottons Eco
40°
Main wash - Rinses
Maximum spin speed 1200 rpm for model ZWF 12380W
(1400 for model ZWF 14380W )
Max. load 7 kg
Coloured cotton. This programme can be selected for slightly
soiled cotton items. The temperature will decrease and the
washing time will be extended. This allows to obtain a good
washing efficiency by saving energy.
Downloaded From WashingMachine-Manual.com Manuals
11
Programme - Maximum and Minimum Temperature - Cycle
Description - Maximum Spin Speed - Maximum Fabrics
Load - Type of Laundry
Synthetics
50° - 40°
Main wash - Rinses
Maximum spin speed at 900 rpm
Max. load 3,5 kg - Reduced load 2 kg
Synthetic or mixed fabrics: underwear, coloured garments,
non-shrink shirts, blouses.
Options
SPIN
NIGHT CYCLE
RINSE HOLD
PREWASH
SUPER QUICK 1)
EXTRA RINSE
2)
SPIN
RINSE HOLD
PREWASH
EXTRA RINSE
2)
NIGHT CYCLE
RINSE HOLD
PREWASH
SUPER QUICK 1)
EXTRA RINSE
2)
Easy Iron
40°
Main wash - Rinses
Maximum spin speed at 900 rpm
Max. load 1 kg
Synthetic or mixed fabrics
Selecting this programme the laundry is gently washed and
spun to avoid any creasing. In this way ironing is easier. Furthermore the machine will perform additional rinses.
Delicates
40° - 30°
Main wash - Rinses
Maximum spin speed at 700 rpm
Max. load kg 3,5 - Reduced load kg 2
Delicate fabrics: acrylics, viscose, polyester.
Detergent drawer
Rinse
Rinses
Maximum spin speed 1200 rpm for model ZWF 12380W
(1400 for model ZWF 14380W )
Max. load 7 kg
With this programme it is possible to rinse and spin cotton
garments which have been washed by hand. The machine performs 3 rinses, followed by a final long spin.
Important!
The spin speed will automatically assume the setting for cotton items. if required, reduce the spin speed.
Drain
Draining of water
Max. load 7 kg
For emptying out the water of the last rinse in programmes
with the option Rinse Hold or Night Cycle selected.
Downloaded
From WashingMachine-Manual.com Manuals
12
SPIN
NIGHT CYCLE
RINSE HOLD
EXTRA RINSE
Programme - Maximum and Minimum Temperature - Cycle
Description - Maximum Spin Speed - Maximum Fabrics
Load - Type of Laundry
Options
Spin
Drain and long spin
Maximum spin speed 1200 rpm for model ZWF 12380W
(1400 for model ZWF 14380W )
Max. load 7 kg
Separate spin for hand washed garments and after programmes with the Rinse Hold or Night Cycle option selected.
You can reduce the spin speed to the required level by pressing the relevant button to adapt it to the fabrics to be spun.
SPIN
Wool
40°
Main wash - Rinses
Maximum spin speed at 900 rpm
Max. load 2 kg
Washing programme for machine washable wool. Note : A
single or bulky item may cause imbalance. If the appliance
doesn’t perform the final spin phase, add more items, redistribute the load manually and then select the spinning programme.
SPIN
NIGHT CYCLE
RINSE HOLD
Hand Wash
30° - Cold
Main wash - Rinses
Maximum spin speed at 900 rpm
Max. load 2 kg
Special programme for delicate fabrics with «hand washing»
care symbol.
SPIN
NIGHT CYCLE
RINSE HOLD
Detergent drawer
Mini
30°
Main wash - Rinses
Maximum spin speed at 700 rpm
Max. load 2 kg
Ideal for laundry which is lightly soiled or which only needs
freshening up.
Silk
30°
Main wash - Rinses
Maximum spin speed at 700 rpm
Max. load 1 kg
Delicate washing programme suitable for silk and mixed synthetic items.
Downloaded From WashingMachine-Manual.com Manuals
NIGHT CYCLE
RINSE HOLD
13
Programme - Maximum and Minimum Temperature - Cycle
Description - Maximum Spin Speed - Maximum Fabrics
Load - Type of Laundry
Options
Sport Shoes
40°
Main wash - Rinses
Maximum spin speed at 900 rpm
Max. load: 1 pair of shoes
With this programme it is possible to wash one pair of sport
shoes (or 2 pairs if they are small). The shoes would be gently washed and spun
Don't wash your sport shoes together with laundry.
SPIN
NIGHT CYCLE
RINSE HOLD
PREWASH
EXTRA RINSE
Sport
40°
Prewash - Main wash - Rinses
Maximum spin speed at 900 rpm
Max. load: 2,5 kg
This programme is suitable for washing heavily soiled sport
items. The appliance will add automatically a prewash phase
before the main wash to eliminate mud stains.
SPIN
NIGHT CYCLE
RINSE HOLD
EXTRA RINSE
Detergent drawer
2)
Important! We recommend that you DON'T put the detergent
into the prewash compartment of the detergent drawer to
rinse the laundry before the main wash with water only.
OFF
For cancelling the programme which is running or to switch
the machine off .
1) If you select the Super Quick option by pressing button 3 , we recommend that you reduce the maximum load as indicated. Full
loading is possible however with somewhat reduced cleaning results.
2) If using liquid detergents, a programme without PREWASH must be selected.
What to do if ...
Certain problems are due to lack of simple maintenance
or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below.
During machine operation it is possible that the red pilot light of button 6 blinks, one of the following alarm
codes appears on the display and some acoustic signals sound every 20 seconds to indicate that the machine is not working:
•
•
: problem with the water supply.
: problem with the water draining.
•
: door open.
Once the problem has been eliminated, press the button
6 to restart the programme. If after all checks, the problem persists, contact your local Service Centre.
Downloaded
From WashingMachine-Manual.com Manuals
14
Problem
Possible cause/Solution
The machine does not start:
The door has not been closed.
• Close the door firmly.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
• Replace the fuse.
The selector dial is not correctly positioned and the button 6 has not been
pressed.
• Please turn the selector dial and press the button 6 again.
The delay start has been selected.
• If the laundry are to be washed immediately, cancel the delay start.
The Child Safety Lock has been activated.
• Deactivate the Child Safety Lock.
The machine does not fill:
The water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked.
• Clean the water inlet filters. (See "Cleaning the water inlet filters" for
more details).
The door is not properly closed.
• Close the door firmly.
The machine does not empty and/
or does not spin:
The drain hose is squashed or kinked.
• Check the drain hose connection.
The drain filter is clogged.
• Clean the drain filter.
An option or a programme that ends with the water still in the tub or a that
eliminates all the spinning phases has been selected.
• Select the draining or spinning programme.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
Downloaded From WashingMachine-Manual.com Manuals
15
Problem
Possible cause/Solution
There is water on the floor:
Too much detergent or unsuitable detergent (creates too much foam) has
been used.
• Reduce the detergent quantity or use another one.
Check whether there are any leaks from one of the inlet hose fittings. It is
not always easy to see this as the water runs down the hose; check to see if
it is damp.
• Check the water inlet hose connection.
The drain or inlet hose is damaged.
• Replace it with a new one.
The cap on the emergency emptying hose has not been replaced or the filter
has not been properly screwed in after cleaning action.
• Refit the cap on the emergency emptying hose or screw the filter fully in.
Unsatisfactory washing results:
Too little detergent or unsuitable detergent has been used.
• Increase the detergent quantity or use another one.
Stubborn stains have not been treated prior to washing.
• Use commercial products to treat the stubborn stains.
The correct temperature was not selected.
• Check if you have selected the correct temperature.
Excessive laundry load.
• Reduce the laundry load.
The door will not open:
The programme is still running.
• Wait the end of washing cycle.
The door lock has not been released.
• Wait until the pilot light 8.2 goes off.
There is water in the drum.
• Select drain or spin programme to empty out the water.
The machine vibrates is noisy:
The transit bolts and packing have not been removed.
• Check the correct installation of the appliance.
The support feet have not been adjusted
• Check the correct levelling of the appliance.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
Downloaded
From WashingMachine-Manual.com Manuals
16
Problem
Possible cause/Solution
Spinning starts late or the machine
does not spin:
The electronic unbalance detection device has cut in because the laundry is
not evenly distributed in the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several times before the unbalance
disappears and normal spinning can resume. If, after 10 minutes, the laundry is still not evenly distributed in the drum, the machine will not spin. In
this case, redistribute the load manually and select the spin programme.
• Redistribute the laundry.
The load is too small.
• Add more items, redistribute the load manually and then select the spinning programme.
The machine makes an unusual
noise:
The machine is fitted with a type of motor which makes an unusual noise
compared with other traditional motors. This new motor ensures a softer
start and more even distribution of the laundry in the drum when spinning,
as well as increased stability of the machine.
No water is visible in the drum:
Machines based on modern technology operate very economically using
very little water without affecting performance.
Mod
Prod . ...
. No.
...
...
...
...
..
Ser.
No.
...
...
...
If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note
of the model, serial number and purchase date of your
machine: the Service Centre will require this information.
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ... ... ...
Technical data
Dimensions
Width
Height
Depth
Depth (Overall dimensions)
Electrical connection
Voltage - Overall power - Fuse
Information on the electrical connection is given on the rating plate, on the
inner edge of the appliance door.
Water supply pressure
Minimum
Maximum
0,05 MPa
0,8 MPa
Maximum Load
Cotton
7 kg
Spin Speed
Maximum
1200 rpm (ZWF 12380W)
1400 rpm (ZWF 14380W)
Downloaded From WashingMachine-Manual.com Manuals
60 cm
85 cm
60 cm
63 cm
17
Consumption values
Programme
Energy consumption
(KWh)
Water consumption (litres)
White Cottons 90°
2,2
65
Cottons 60°
1.4
62
Cotton ECO 60° 1)
1,19
52
Cottons 40°
1,2
57
Synthetics 40°
0.5
44
Delicates 40°
0.55
58
Wool/ Handwash 30°
0.25
52
Programme duration
(Hours.Minutes)
For the duration of the programmes, please refer to
the display on the control
panel.
1) « Cotton Eco » at 60°C with a load of 7 kg is the reference programme for the data entered in the energy label, in compliance
with EEC 92/75 standards.
The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on
the quantity and type of laundry, on the inlet water temperature and on the ambient temperature.
Care and cleaning
Warning! You must DISCONNECT the appliance
from the electricity supply, before you can carry
out any cleaning or maintenance work.
Descaling
The water we use normally contains lime. It is a good
idea to periodically use a water softening powder in the
machine. Do this separately from any laundry washing,
and according to the softening powder manufacturer's
instructions. This will help to prevent the formation of
lime deposits.
External cleaning
Clean the exterior cabinet of the appliance with soap
and water only, and then dry thoroughly.
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer
should be cleaned regularly.
Remove the drawer by
pressing the catch downwards and by pulling it
out. Flush it out under a
tap, to remove any traces
of accumulated powder.
To aid cleaning, the top
part of the additive compartment should be removed.
Cleaning the drawer recess
Downloaded
From WashingMachine-Manual.com Manuals
18
Having removed the drawer, use a small brush to
clean the recess, ensuring that all washing powder residue is removed
from the upper and lower
part of the recess.
Replace the drawer and run the rinse programme without any clothes in the drum.
Remove foreign bodies
and fluff from the filter
seat and from the pump
impeller.
Cleaning the pump
The pump should be inspected regularly and particularly if:
• the appliance does not empty and/or spin;
• the appliance makes an unusual noise during draining due to objects such as safety pins, coins etc.
blocking the pump;
• a problem with water draining is detected (see chapter “What to do if...” for more details).
Warning! Before opening the pump door, switch
the appliance off and remove the mains plug from
the socket.
Proceed as follows:
• Unplug the appliance.
• If it is necessary, wait until the water has cooled down.
Open the pump door.
Place a container close to
the pump to collect any
spillage.
Check carefully whether the pump impeller rotates (it
rotates jerkily). If it doesn’t rotate, please contact your
Service Centre.
Put the cap back on the emergency emptying hose
and place the latter back in its seat.
Replace the filter into the
pump by inserting it correctly into the special
guides. Screw the pump
cover firmly by turning it
clockwise.
Pull out the emergency
emptying hose, place it in
the container and remove
its cap.
When no more water comes out, unscrew the pump
cover by turning it anti-clockwise and remove the filter. Use pliers, if necessary. Always keep a rag nearby
to dry up any water spillages when removing the cover.
Clean the filter under a tap, to remove any traces of fluff.
Close the pump door.
Caution! When the appliance is in use and
depending on the programme selected there can
be hot water in the pump.
Never remove the pump cover during a wash cycle,
always wait until the appliance has finished the cycle,
and is empty. When refitting the pump cover, ensure it
is securely re-tightened so as to stop leaks and young
children being able to remove it.
Downloaded From WashingMachine-Manual.com Manuals
19
Cleaning the water inlet filters
Important! If the appliance doesn't fill, takes long to fill
with water, the starting button blinks yellow or the
display (if available) shows the relevant alarm (see
chapter "What to do if..." for more details), check if the
water inlet filters are blocked .
To clean the water inlet filters:
• Turn off the water tap.
• Unscrew the hose
from the tap.
• Clean the filter in the
hose with a stiff brush.
• Screw the hose back onto the tap. Make sure the
connection is tight.
• Screw the hose back to the machine and make
sure the connection is tight.
• Turn on the water tap.
Frost precaution
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
• Turn off the water tap.
• Unscrew the inlet hose.
• Place the end of the emergency emptying hose and
that of the inlet hose in a bowl placed on the floor
and let water drain out.
• Screw the water inlet hose back on and reposition
the emergency emptying hose after having put the
cap on again.
• When you intend to start the machine up again, make
sure that the room temperature is above 0°C.
Emergency emptying out
• Unscrew the hose from the machine. Keep a rag
nearby because some water may flow.
• Clean the filter in the valve with a stiff brush or
with the piece of cloth.
35°
45°
If the water is not discharged, proceed as follows to empty out the machine:
• pull out the plug from the power socket;
• close the water tap;
• if necessary, wait until the water has cooled down;
• open the pump door;
• place a bowl on the floor and place the end of the
emergency emptying hose into the bowl. Remove its
cap. The water should drain by gravity into the bowl.
When the bowl is full, put the cap back on the hose.
Empty the bowl. Repeat the procedure until water
stops flowing out;
• clean the pump if necessary as previously described;
• replace the emergency emptying hose in its seat after
having plugged it;
• screw the pump cover again and close the door.
Installation
Unpacking
All transit bolts and packing must be removed before using the appliance.
You are advised to keep all transit devices so that they
can be refitted if the machine ever has to be transported
again.
Downloaded
From WashingMachine-Manual.com Manuals
20
Accurate levelling prevents vibration, noise and displacement of the machine during operation. Never place cardboard, wood or similar materials under the machine to
compensate for any unevenness in the floor.
If necessary, check the
setting with a spirit level.
After removing all the
packaging, carefully lay
machine on it's back to remove the polystyrene
base from the bottom.
Remove the power supply
cable and the hoses from
the hose holders on the
rear of the appliance.
Water inlet
Warning! This appliance must be connected to a
cold water supply
Unscrew the three bolts.
Slide out the relevant plastic spacers.
Caution! Before connecting up the appliance to
new pipework or to pipework that has not been
used for some time, run off a reasonable amount of
water to flush out any debris that may have collected
Caution! Do not use the hose from your previous
appliance to connect to water supply.
The inlet hose is screwed to the back of the appliance.
Connect the hose to a tap
with a 3/4” thread. Always use the hose supplied with the appliance.
Open the porthole and remove the polystyrene
block fitted on the door
seal.
Fill the smaller upper
hole and the two large
ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet.
Positioning
35°
45°
Install the machine on a flat hard floor. Make sure that
air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch
the wall or other kitchen units. Level the washing machine by raising or lowering the feet. The feet may be
tight to adjust as they incorporate a self locking nut, but
the machine MUST be level and stable.
Any necessary adjustment can be made with a spanner.
Downloaded From WashingMachine-Manual.com Manuals
21
The other end of the inlet hose which connects to the
appliance can be turned as showed in the picture.
Do not place the inlet hose downwards. Angle the
hose to the left or right depending on the position of
your water tap. Set the hose correctly by loosening
the ring nut. After positioning the inlet hose, be sure
to tighten the ring nut again to prevent leaks.
Place the drain hose into your standpipe, which
should have an internal diameter of approximately 38
mm thus ensuring there is an air break between the
drain hose and standpipe.
When discharging into a standpipe ensure that the
top of the standpipe is no more than 90 cm (35.4'')
and no less than 60 cm (23.6'') above floor level.
38 mm (1.5”)
standpipe
diamater
Caution! The inlet hose must not be lengthened.
If it is too short and you do not wish to move the
tap, you will have to purchase a new, longer hose
specially designed for this type of use.
Warning! Installation should comply with local
water authority and building regulations’
requirements.
The appliance must be connected to a cold water
supply.
A minimum water pressure of 0.05 MPa (0.5 bar) is
required for safe operation of the appliance.
If you cannot make the cold water connection direct
from the rising mains, you may be able to operate the
appliance from your cold water storage system.
There should be a minimum vertical distance of 5.02 m
(16.5 ft) between the appliance’s inlet and the bottom of
the water storage tank.
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece is
available from your local Service Force Centre. The
joining piece must have an internal diameter of 18 mm.
Water drainage
This appliance is designed to be permanently plumbed
into your home's drainage system using one of the following methods.
1. Into a drainage standpipe.
Firstly form a hook in the end of the drain hose using
the “U” piece” supplied.
30 cm (12”)
Min. 60 cm (23.6”)
Max. 90 cm (35.4”)
If your drain hose looks
like this (see beside) you
do not require the “U”
piece”. Just push the
hose firmly in to the standpipe.
2. Onto a sink outlet spigot.
“U” piece supplied
Loop
Downloaded
From WashingMachine-Manual.com Manuals
22
If the outlet spigot has
not been used before, remove any blanking plug
that may be in place.
Push the drain hose onto
the spigot and secure
with a clip, ensure a loop
is formed in the drain
hose (see above) to prevent waste from the sink
entering the appliance.
If you intend to drain the hose from the machine into
a sink, make sure that the sink is empty and the plug
hole is not blocked. Use the plastic “U - Piece” supplied.
Special conditions
If the floor is carpeted or covered with crumbly or soft
material, insert a rigid support base under the feet to prevent noise, vibration or displacement. The base should
protrude a few centimetres beyond the edges of the appliance.
Warning! The appliance should NOT be placed
on deep pile carpeting.
Note!
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
breakdown.
In the interest of the environment
The appliance should be connected to the FOUL drainage system, the water will then be taken to a sewage
works for treatment before being discharged safely into
a river.
It is essential that these appliances are not connected to
the surface water drainage system as this water is discharged directly into a river or stream and may cause
pollution.
If you require any further advice please contact your local water authority.
SHOWER
SINK TOILET
BATH
BIDET
WASHING
MACHINE
DISHWASHER
RAINWATER
‘RUN-OFF’
SURFACE WATER
DRAINS & SEWERS
UNTREATED
DISCHARGE
RIVER
FOUL DRAIN
FOUL SEWERS
SEWAGE TREATMENT
WORKS
TREATED DISCHARGE
RIVER
Electrical connection
Any electrical work required to install this appliance
should be carried out by a qualified electrician or competent person.
Warning! THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability should
this safety measure not be observed.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance’s
rating plate.
Warning! Information on the electrical connection
is given on the rating plate on the inner edge of
the appliance door.
The appliance is supplied with a 13 amp plug fitted.
In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS1363/A) fuse must
be used.
Should the plug need to be replaced for any reason, proceed as described below.
The wires in the mains lead are coloured in accordance
with the following code:
Downloaded From WashingMachine-Manual.com Manuals
23
1
2
3
4
1
Green & Yellow
Brown
Cord clamp
Blue
2
4
3
The wire coloured green and yellow must be connected
to the terminal marked with the letter «E» or by the
or coloured green and yellow.
earth symbol
The wire coloured blue must be connected to the terminal «N» or coloured black.
The wire coloured brown must be connected to the terminal marked «L» or coloured red.
Upon completion there must be no cut, or stray strands
of wire present and the cord clamp must be secure over
the outer sheath.
Warning! A cut off plug inserted into a 13 amp
socket is a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of safely.
Should the appliance power supply cable need to be
replaced, this must be carried out by our Service Force
Centre. The appliance should not be connected to the
electrical supply by means of an extension cable.
Note!
When the appliance is installed the power supply cable
must be accessible.
Permanent connection
In the case of permanent connection it is necessary that
you install a double pole switch between the appliance
and the electricity supply (mains), with a minimum gap
of 3 mm between the switch contacts and of a type suitable for the required load in compliance with the current
electrical regulations.
The switch must not break the yellow and green earth
cable at any point.
Environmental concerns
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more
detailed information about recycling of this product,
please contact your local council, your household waste
disposal service or the shop where you purchased the
product.
Packaging materials
The materials marked with the symbol
>PE<=polyethylene
are recyclable.
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by disposing of
them properly in appropriate collection containers.
Ecological hints
To save water, energy and to help protect the environment, we recommend that you follow these tips:
• Normally soiled laundry may be washed without prewashing in order to save detergent, water and time
(the environment is protected too!).
• The machine works more economically if it is fully
loaded.
• With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed
at a lower temperature.
• Measure out detergent according to the water hardness, the degree of soiling and the quantity of laundry being washed.
Downloaded
From WashingMachine-Manual.com Manuals
24
Downloaded From WashingMachine-Manual.com Manuals
25
Downloaded
From WashingMachine-Manual.com Manuals
26
Downloaded From WashingMachine-Manual.com Manuals
27
192994972 - 00 - 182010
www.zanussi.com/shop
Downloaded From WashingMachine-Manual.com Manuals