ACCESSORIES-CONTENTS
Overview filter carriers/filters
124
Filters / Filter carriers
125-127
Connection & extension cables
128-130
PC connection cables / converter cables /
T-junction box
131-133
Service cables
134
Simulators
135
Mounting hardware
135-136
Desktop stands / Carry cases
137-139
123
ACCESSORIES
Filter carriers/Filters
Description
ROTRONIC filter carriers protect the humidity and temperature sensors against
mechanical damage. Filters act as a protective barrier against contaminants/pollutants that can influence the sensor. When choosing the correct combination
of filter carrier and filter there are many factors to consider. Air velocity at the
sensor, airborne chemical contaminates, mechanical protection of the sensor,
and required response time are some of the many considerations.
Plastic filter carrier
Metal filter carrier
œ Maximum temperature 120 °C
œ Maximum temperature 200 °C
t Mechanical protection
t Mechanical protection
124
120 °C
✔✔
✔✔
✔
20
20
Wire mesh filters
100 °C
Sintered steel
Membrane filters e.g. teflon
200 °C
Screen filters
Fast response time
(low damping)
Max. air velocity [m/s] (continuous load)
Polyethylene filters
Maximum temperature (observe range of
application of filter carrier)
Protection against particulates
Teflon filters
Overview filters
120 °C
200 °C
200 °C
✔
✔
40
25
✔
✔✔
15
10
ACCESSORIES
Filters and filter carriers for standard probes HC2-S / HC2-S3
Order code
Filter carrier
NSP-PCB-PE
Polycarbonate Black
Filter element
Pore size
Range of electronics
-50…100 °C
Polyethylene, gray
20 µm
NSP-PCB-PE40
Polyethylene, white
40 µm
NSP-PCB-WM
Wire mesh
20…25 µm
NSP-PCB-TF
Teflon
10 µm
NSP-PCB-MFD
MFD
Fleece
NSP-PCB-PP100
Polypropylene
150 µm
NSP-PCB
No filter element, only carrier
NSP-PCB-SET
Consisting of:
1x polyethylene, gray
NSP-PCW-PE
Polycarbonate White
20 µm
1x wire mesh
20…25 µm
1x Teflon
10 µm
Polyethylene, gray
20 µm
NSP-PCW-PE40
Polyethylene, white
40 µm
NSP-PCW-WM
Wire mesh
20…25 µm
NSP-PCW-TF
Teflon
10 µm
NSP-PCW
No filter element, only carrier
NSP-PCW-SET
Consisting of:
1x polyethylene, gray
20 µm
1x wire mesh
20…25 µm
1x Teflon
10 µm
Teflon
2 µm
SET
SET
-50…100 °C
SET
SET
Particulate filter / Waterproof
NSP-POM-FD2
POM, white
-50…100 °C
125
ACCESSORIES
Filters and filter carriers for industrial probe series HC2-IC
Order code
Filter carrier
Filter element
Pore size
Range of electronics
NSP-ME-WM
Brass, nickel-plated
Wire mesh
DIN 1.4401
20…25 µm
-100…200 °C
NSP-ME-SS
Sintered steel
DIN 1.4401
5 µm
-100…200 °C
NSP-ME-TF
Teflon
10 µm
-80…200 °C
Spare parts
NSP-ME
Brass, nickel-plated
No filter element, only carrier
SP-M15
No filter carrier,
only filter
Wire mesh
DIN 1.4401
20…25 µm
-100…200 °C
SP-S15
No filter carrier,
only filter
Wire mesh
DIN 1.4401
5 µm
-100…200 °C
SP-T15
No filter carrier,
only filter
Teflon
10 µm
-80…200 °C
-100…200 °C
Filters and filter carriers for industrial probe series HC2-IM / HC2-IE
Order code
Filter carrier
Filter element
Pore size
Range of electronics
SP-MC15
Brass, nickel-plated
Wire mesh
DIN 1.4401
20…25 µm
-100…200 °C
SP-SC15
Sintered steel
DIN 1.4401
5 µm
-100…200 °C
SP-TC15
Teflon
10 µm
-80…200 °C
Spare parts
126
SP-MSB15
Brass, nickel-plated
No filter element, only carrier
SP-M15
No filter carrier,
only filter
Wire mesh
DIN 1.4401
20…25 µm
-100…200 °C
SP-S15
No filter carrier,
only filter
Sintered steel
DIN 1.4401
5 µm
-100…200 °C
SP-T15
No filter carrier,
only filter
Teflon
10 µm
-80…200 °C
-100…200 °C
ACCESSORIES
Filter for 5 mm probe HC2-C05
Order code
Filter carrier
Filter element
Pore size
Range of electronics
SP-T05
No filter carrier,
only filter
Teflon
10 µm
-80…200 °C
Filters for handheld probe HC2-HP28/HP50
Order code
Filter carrier
Filter element
Pore size
Range of electronics
ET-Z10
No filter carrier,
only filter
Sintered steel
DIN 1.4401
5 µm
-80…200 °C
SP-TS12
No filter carrier,
only filter
Teflon
10 µm
-40…200 °C
Filters and filter carriers transmitter HF3
Order code
Filter carrier
Filter element
Pore size
Range of electronics
NSP-PCG-PE
Polycarbonate gray
Polyethylene gray
20 µm
-40…85 °C
Wire mesh
20…25 µm
-80…85 °C
NSP-PCG-WM
Filters for web and water activity probes HC2-AW-USB, HC2-AW, BFC-UART
Order code
Description
ET-W24-Set
Flat wire mesh filter with circlip, Ø 24 mm for HC2-AW (-USB)
Pore size: approx. 20…25 µm
ET-W37-Set
Flat wire mesh filter with circlip, Ø 37 mm for BFC-UART
Pore size: approx. 20…25 µm
127
ACCESSORIES
HC2 probe extension
cables for transmitters / handheld instruments / data loggers
ø15
1/4"
12
ø15
1/4"
Transmitter
Handheld
Data logger
Max. 5 meters
Probe
12
111
Max. 100 meters
61
Probe
8
Features
ø5
10
Transmitter
Handheld
Data logger
With signal amplifier
AC3003 (digital)
t Ranges of application -40...90 °C
ø5
t 30 cm type used in conjunction where Ethernet or wireless Ethernet could
35
cause self heating
75
79
11
11
ø15
ø15
E2-02A
E2-02A-S
HC2 probe extension cables
Order code
Color
Shaft
Cable length
E2-F3A
Black
Normal
30 cm
E2-01A
1m
2m
E2-02A
E2-02A-S
Short [S]
E2-05A
Normal
E3-F3A
2m
5m
White
30 cm
E3-01A
1m
2m
E3-02A
E3-02A-S
Short [S]
2m
E3-05A
Normal
5m
Cables
to connect an analog probe to a HP23-A, HF8, HL-NT
Features
t Range of electronics -40...70 °C
ø5
t Open ends
11
75
Cables to connect an analog probe to a HP23-A, HF8, HL-NT
Order code
Color
Cable length
A-01XX
Black
1m
A-02XX
2m
A-05XX
5m
ø15
A-01XX
HC2 connector
Features
t Maximum wall thickness: 4 mm
t Hole diameter: 12.5 mm
t 30 cm long, color-coded wires
t Tinned ends
t Range of application: -40…100 °C
128
Order code
E2-XX
ACCESSORIES
Extension cables
with open ends
ø15
1/4"
Order code
Color
Shaft
Length
Range of electronics
12
Supply voltage 3.3 VDC (requires a regulated 3.3 VDC supply)
E2-01XX
Black
Normal
1/4"
2m
E2-02XX
2m
Normal
Short [S]
5m
White
Normal
-40...90 °C
5m
1m
E3-02XX
2m
E3-05XX
5m
61
E2-05XX-S
12
Short [S]
E2-05XX
Supply voltage 5…24 VDC / 5…16 VAC (with electronic control)
E2-01XX-ACT/01
Black
Normal
5m
E2-05XX-ACT/01
E3-01XX-ACT/01
White
Normal
E3-05XX-ACT/01
ø5
ø5
1m
-40...70 °C
E2-01xx
2m
5m
E3-02XX-ACT/01
10
1m
2m
E2-02XX-ACT/01
111
E2-02XX-S
E3-01XX
ø15
1m
E2-02xx-S
Supply voltage 5…40 VDC / 6…28 VAC (with electronic control)
E2-01XX-ACT-HV
Black
Normal
1m
E2-02XX-ACT-HV
2m
E2-05XX-ACT-HV
5m
-40...70 °C
Wire color code
Green
VDD (+)
3.3 VDC
5…24 VDC / 5…16 VAC
5…40 VDC / 6…28 VAC
Gray
Red
Blue
White
GND
Digital and power supply GND
RXD
UART
TXT
UART
Out1
Analog output 1,
standard humidity 0…100 %RH
Brown
Out2
Analog output 2,
standard temperature -40…60 °C
Yellow
AGND
Analog GND
129
ACCESSORIES
Digital signal amplifiers
ø15
11
1/4"
12
Features
79
t Color: black
61
t Range of application -40 to 70 °C
35
Digital signal amplifiers
ø5
ø5
ø5
75
ø17
75
ø17
ø5
Order code
Description
Cable length / Shaft
AC3003
UART signal amplifier, probe and
instrument side with tinned ends
Normal shaft
AC3003-L
UART signal amplifier, probe and
instrument side with tinned ends
Long shaft [L]
AC3003-Cable-D
Cat. 5e cable S/FTP
«solid wire»
100 m
AC3003-Cable-L
Cat. 5e cable S/FTP «stranded wire»
100 m
AC3003/10
AC3003 with pre-mounted cat. 5
cable, normal shaft
10 m
AC3003/20
AC3003L
With long shaft
AC3003
50 m
AC3003/80
80 m
AC3003/100
100 m
PT100 extension cables
ø11.5
39
Features
t Extension cable for PT100 4-wire temperature probe
ø11
t Range of electronics: -40 to 100 °C
t 4-pin Binder female to 4-pin Binder male connector
PT100 extension cables
9
ø11
36
ø5
ø11.5
130
20 m
AC3003/50
Order code
Cable length
AC1607/1
1m
AC1607/2
2m
AC1607/3
3m
AC1607/5
5m
AC1607/10
10 m
ACCESSORIES
USB adapters
ø15
for HC2 probes
AC3001-L
1/4"
AC3001
12
ø15
Features
1/4"
12
111
t To connect HC2 probes to a PC via the USB interface
61
t Requires HW4 software on the PC
t Power supply via USB interface
t Range of electronics: -40 to 70 °C
ø5
8
t Cable length: 2.8 m
10
ø5
USB adapters for HC2 probes
Shaft
AC3001
Active UART to
USB converter cable
Short shaft
Active UART to USB
converter cable for XD Probes
Short shaft
AC3001-L
XD-AC3001
ø17
ø17
Long shaft [L]
ø3.5
ø3.5
45
45
11.5
8
11.5
USB adapter
75
Description
75
Order code
with open ends for HC2 probes
11.5
8
8
45
Features
t To connect HC2 probes (with open ends) to a PC via the USB interface
ø3.5
t Requires HW4 software on the PC
t The probe requires a separate power supply (5...24 VDC / 5...16 VAC)
t Cable length 2.8 m
ø17
75
t Range of electronics -40…70 °C
USB adapters for HC2 probes
Order code
Description
AC3001-XX
Active UART to USB converter cable, open ends
ø5
(incl. luster terminal)
ø15
15.5
12
RS-232 adapters
1/4"
for HC2 probes
61
Features
t To connect HC2 probes to a PC via the RS-232 interface
ø5
21.5
t Requires HW4 software on the PC (power supply 9 V, AC adapter AC1207
must be ordered separately)
t Range of electronics -40 to 70 °C
Description
Cable length
AC3002
Active UART to
RS-232 converter cable
2.8 m
AC adapter RNG 11, 9 V
Active UART to
RS2-32 converter cable
for XD probe
ø4.5
46
AC1207
XD-AC3002
21.5
Order code
112
ø21
RS-232 adapters for HC2 probes
5
131
ACCESSORIES
Ethernet adapters
for HC2 probes
Features
t Connects HC2 probes to a PC via Ethernet interface
t Requires HW4 software on the PC
t Power supply via AC adapter (order separately) or via PoE
t Range of electronics: -40 to 70 °C
Ethernet adapters for HC2 probes
70
ø3.2
Order code
Description
Cable length
AC3005
UART <> Ethernet
35 cm
AC1207
AC adapter RNG 11, 9 V
34
ø3.2
ø7
41.5
93
33.5
41.5
ø7
Power supply via AC adapter
Power supply via PoE
RS-485 / Modbus adapter for HC2 probes
ø15
Features
1/4"
12
t Connects HC2 probes to a RS-485 or Modbus network
t Programmable between Modbus and RS-485 protocol in the HW4 software
t Power supply: 5…28 VDC
111
t Range of electronics: -40 to 70 °C
Self-heating of the adapter can lead to errors of the measured values; it is therefore advisable to place the probe a short distance away with an extension cable
(e.g. E2-F3A).
10
RS-485 / Modbus adapters
ø5
Order code
Description
Cable length
E2-01XX-MOD
Adapter cable for HC2
RS-485 / MODBUS
1m
E2-02XX-MOD
E2-05XX-MOD
132
2m
5m
ACCESSORIES
8
11.5
RS-485 / USB converter
45
Features
t Compatible with HF456, HF53x, HF54x, HF55x with digital interface
ø3.5
t Power supply via USB interface
21.5
t Acts in a RS-485 network as a slave
t Range of electronics: -40 to 70 °C
ø21
Order code
Description
AC3010
RS-485-USB converter
21.5
RS-485 <-> USB converter
112
t Cable length: 1 m
ø4.5
Ethernet / RS-485 converter
Features
t Compatible with all HF4 to HF8 Transmitters with a RS-485 interface,
HL-NT Data Loggers
t Enables connection of up to 64 RS-485 slaves to an Ethernet network
t Has an IP address, but no RS-485 address , not considered as a RS-485
device
t Range of electronics: -40 to 70 °C
t Current consumption: 85 mA
Requires an external 12-24 VDC power supply. The power supply can simultaneously be used to supply the connected RS-485 devices.
Ethernet / RS-485 converter
Order code
Description
AC3011
RS-485 Masterbox
RS-485 T-junction box
Features
t Passive RS-485 T-junction box
t For simple installation of RS-485 networks
t Wall mounting
t 240 Ohm terminator, connectable via jumper
t Range of electronics: -40…70 °C
RS-485 T-junction box
Order code
Description
AC3021
RS-485 T-junction box
133
ACCESSORIES
Power
supply
Service cables for HF, HP21 / 22, HL-20
F
Features
t Connects ROTRONIC instruments via their service interface (UART) to a USB
interface
AC3006
AC3006
t Compatible with HF3, HF4, HF5, HF7, HF8, HP21 and HP22, HL-20(D) / HL-21(D)
t Requires HW4 software
Power
supply
t For programming (settings, re-scaling, firmware update, etc.)
compatible instruments
t Two different types:
AC3006, the instrument must be supplied with power
AC3009, the instrument is supplied with power via the USB interface
AC3009
AC3009
Note: AC3006 used in combination with a 2-wire instrument: with all 2-wire types
(HF320, HF420, HF520, HF620, HF720, XB20) ensure that a computer or laptop is
galvanically isolated from the mains power supply.
Service cable
Order code
Description
AC3006
Service cable (requires external power supply)
AC3009
Service cable (power supplied via USB port)
Service cable
for HP23-A / HP23-AW-A
Features
t Connects HP23-A and HP23-AW-A to a PC
t Requires HW4 software
t For programming (settings, re-scaling, firmware update, etc.)
of HP23-A, HP23-AW-A
Service cable for HP23-A / HP23-AW-A
Order code
Description
Length
AC0003
USB-A to mini USB cable
1.8 m
Service cable
for HL-NT
Features
t Connects the HL-NT docking station to a PC
t Requires HW4 software
t For programming (settings, re-scaling, firmware update, etc.)
of HL-NT data loggers
Service cable for HL-NT docking station
134
Order code
Description
Length
AC0002
Standard USB A/B cable
1.8 m
ACCESSORIES
HC2 simulators
Features
t Humidity /Temperature simulators with any 2 fixed values and certificate
t For system validation
t Values cannot be changed with HW4 software
t Range of electronics: -40 to 100 °C
HC2 simulators
Order code
Humidity
Temperature
HC2-SIMC-000/0023
0 %RH
23 °C
HC2-SIMC-035/0023
35 %RH
HC2-SIMC-050/0023
50 %RH
HC2-SIMC-080/0023
80 %RH
Protective caps
Features
Protection-E2/E3
t Protects probes/connectors during cleaning cycles against water and
chemical substances, e.g. H2O2
Protective caps
Protection-Filter
Order code
Protects
Protection-E2/E3
Connectors
Protection-Filter
Sensor
Protection-HC2
Complete HC2
Protection-HC2
Mounting kit for DIN
top-hat rails
AC5002
Mounting kit for DIN top-hat rails
Order code
Description
AC5002
DIN top-hat rail adapter for HF4, HF5, HF8, AC3011 (2 pc.)
AC5002 DIN 120
Top-hat rail 120 mm long (HF4 and HF5, AC3011)
AC5002 DIN 180
Top-hat rail 180 mm long (HF56x, HF8)
135
ACCESSORIES
ø80
LK ø64
3
A
Mounting gland with flange
for temperatures < 100 °C
22
Mounting gland
Order code
Description
AC5005
Mounting gland/ flange for 15 mm probe
A
32
Mounting glands /
Mounting flanges for temperatures > 100 °C
Mounting glands / Mounting flanges for temperatures > 100 °C
Order code
Dimensions
Material
Gasket
Temperature
Mounting gland for 15 mm probe
AC1301-M
M20 x 1.5
Brass, nickel-plated
AC1303-M
Perbunan
To 100 °C
Viton
To 200 °C
Viton
To 200 °C
Viton
To 200 °C
-
To 200 °C
Mounting gland for 25 mm probe
AC1304-M
M32 x 1.5
Brass, nickel-plated
Mounting gland for 15 mm ATEX probe
Mounting gland
Mounting flange
AC1301-MEX
M25 x 1.5
Mounting flange
AC1305 for AC1301-M and AC1303-M
AC1306 for AC1304-M
AC1305
Ø 80 mm
AC1306
Steel,
nickel-plated
HygroClip holders
HygroClip holder
AC1319
136
AC1320
Order code
Description
AC1319
Ø 15 mm, gray
AC1320
Ø 25 mm, gray
-
for 15 / 25 mm
ACCESSORIES
Desktop stand
for HygroPalm HP21 – HP23-A
Features
t Desktop stand for the handheld instruments
HP21, HP22(-A), HP23(-A), HP-23-AW(-A)
Desktop stand for HygroPalm HP21 – HP23-A
Order code
Description
DESK-HP
Desktop
Universal desktop stand
for HygroPalm HP21 – HP23-A / HygroLog HL-NT
Features
t Desktop stand for the handheld instruments HP21, HP22(-A), HP23(-A),
HP23-AW(-A) and HL-NT loggers with docking station
t Set contains a clip for mounting of the HygroPalm
t Set contains screws for mounting of the docking station to the desktop
stand
Desktop stand for HygroPalm HP21 – HP23-A
Order code
Description
DESK-NT
Desktop stand
137
ACCESSORIES
Carry cases
ROTRONIC case inserts are specially designed for the safe transport of ROTRONIC
instruments and accessories. Cases from third parties can destroy the sensors
(through chemical emissions).
Carry case HP22-(A) / HP23-(A)
Features
t Cutouts for:
1x HygroPalm HP22-(A) or HP23-(A)
2x standard probes HC2-S/S3
1x handheld probe (excl. HC2-HK40/42)
1x calibration device ER-15
1x pack humidity standards
1x 9 V battery
1x extension cable probe for a handheld instrument (max. 2 m)
1x instruction manual
t Dimensions: 450 x 360 x 140 mm (outer)
Order code: AC1126
Carry case HP21 / HP22-(A) / HP23-(A)
Features
t Cutouts for:
1x HygroPalm HP21, HP22-(A) or HP23-(A)
2x standard probes HC2-S/S3
1x calibration device ER-15
1x pack humidity standards
1x CD-ROM
1x 9 V battery
1x instruction manual
Cutout for extension cable
t Dimensions: 395 x 300 x 105 mm (outer)
Order code: AC1127
Carry case AW
Features
t Cutouts for:
1x HygroPalm HP23-A or HP23-AW-A
1x water activity measurement probe HC2-AW
1x sample holder WP-40 or WP-14-s
4x ampoules (humidity standard)
1x set textile pads
1x 9 V battery
13x Sample containers PS-14 or 6x PS-40
1x instruction manual
t Dimensions: 395 x 300 x 105 mm (outer)
Order code: AC1124
138
ACCESSORIES
Carry cases
Carry case GTS
Features
t Cutouts for:
1x GTS
1x calibration device EGS
1x pack humidity standards
1x 9 V battery
1x battery charger
1x small screwdriver
t Dimensions: 450 x 365 x 135 mm (outer)
Order code: AC1102
Carry case S1
Features
t Cutouts for:
1x handheld instrument with sword probe S1
1x calibration device EGS
1x pack humidity standards
1x 9 V battery
1x AC adapter
1x mini screwdriver
1x manual
t Dimensions: 395 x 295 x 106 mm (outer)
Order code: AC1115
Universal carry case small
Features
t Universal case with resilient protective foam
t Dimensions: 395 x 300 x 105 mm (outer)
Order code: AC1123
Universal carry case large
Features
t Universal case with resilient protective foam
t Dimensions: 450 x 360 x 140 mm (outer)
Order code: AC1125
139