ADEMCO | Security System | User`s guide | ADEMCO Security System User`s guide

VISTA-100
Commercial Fire and Burglary
Partitioned Security System
8VHU*XLGH
FIRE
FIRE
PULL
*
®
N6020-2 Rev B 4/99
TABLE OF CONTENTS
SYSTEM OVERVIEW .................................... 3
A Partitioned System ................................ 3
Zones .................................................... 3
Fire Protection......................................... 4
Burglary Protection .................................. 4
Alarms ................................................... 4
Memory of Alarm ...................................... 4
Speed Key (Macros) ................................. 5
Using Schedules...................................... 5
Device Timers ......................................... 5
Accessing other partitions (GOTO command) 5
Master Keypad Operation .......................... 6
Self-Help Feature ..................................... 6
Phone Access & Voice Response ............... 6
ABOUT THE KEYPADS.................................. 7
FUNCTIONS OF THE KEYPADS ...................... 8
ENTRY/EXIT DELAYS ..................................11
SECURITY CODES & AUTHORITY LEVELS ......12
Duress Code ..........................................12
Quick Arming .........................................12
Authority Levels .....................................13
To Add A User ........................................15
To Change A User's Code .........................17
To Delete A User .....................................17
ACCESSING OTHER PARTITIONS .................18
GOTO Command.....................................18
Global Arming.........................................18
Master Keypad Operation .........................19
Common Lobby Operation.........................20
How User Codes Affect the Common Lobby . .21
CHECKING FOR OPEN ZONES ......................22
DISPLAYING ALL ZONE DESCRIPTORS .........23
BYPASSING PROTECTION ZONES................ 24
Quick Bypass ........................................ 25
Displaying Bypassed Protection Zones ....... 25
ARMING PERIMETER ONLY (STAY)........... 26
ARMING PERIMETER ONLY (INSTANT) .......... 27
ARMING ALL PROTECTION (AWAY)............... 28
ARMING ALL PROTECTION (MAXIMUM) ......... 29
DISARMING AND SILENCING ALARMS........... 30
USING THE KEYSWITCH.............................. 31
CHIME MODE............................................. 32
VIEWING CENTRAL STATION MESSAGES...... 33
PANIC KEYS.............................................. 34
SPEED KEY (MACROS) ............................... 35
ACCESS DOOR CONTROL ........................... 36
USING #70 RELAY MENU MODE.................... 37
USING SCHEDULES.................................... 38
Delaying The Closing Time ........................ 39
Temporary Open/Close Schedules ............. 39
PROGRAMMING DEVICE TIMERS ................. 42
TESTING THE SYSTEM................................ 44
TROUBLE CONDITIONS............................... 46
FIRE ALARM SYSTEM ................................. 48
RECOMMENDATIONS FOR PROPER
PROTECTYION .......................................... 49
EMERGENCY EVACUATION ......................... 51
MAINTAINING YOUR SYSTEM ...................... 52
QUICK GUIDE TO SYSTEM FUNCTIONS ......... 54
SUMMARY OF AUDIBLE NOTIFICATION ......... 56
GLOSSARY ............................................... 57
INSURANCE CREDIT REQUEST FORM ........... 63
INDEX ...................................................... 65
ADEMCO LIMITED WARRANTY ..................... 66
EVENT LOGGING COMMANDS ..................... 67
Ð 2 Ð
SYSTEM OVERVIEW
General
Congratulations on your ownership of an Ademco Partitioned
Security System. You've made a wise decision in choosing it, for
it represents the latest in security protection technology today.
Ademco is the world's largest manufacturer of security systems
and millions of premises are protected by Ademco systems.
This system offers you three forms of protection: burglary, fire
and emergency. To realize the system's full potential, it is
important that you feel comfortable in operating it. Your system
consists of at least one Keypad which provides full control of
system operation, various sensors which provide perimeter and
interior burglary protection, plus a selected number of strategically
placed smoke or combustion detectors designed to provide early
warning in case of fire.
The system uses microcomputer technology to monitor all
protection zones and system status and provides appropriate
information for display on the Keypad(s) used with the system,
and initiates appropriate alarms. Your system may also have
been programmed to automatically transmit alarm or status
messages over the phone lines to a central alarm monitoring
station.
A Partitioned
System
Simply stated, a partitioned system shares one physical alarm
system among different users, each with their own requirements.
For the most part, you as a user need not know about other
users and their structure in the system, but from time to time, you
may see display messages which indicate the system is in use
by another user. Do not be concerned, this is normal. Refer to the
ACCESSING OTHER PARTITIONS section for additional
information.
Zones
Your system's sensing devices have been assigned to various
"zones." For example, the sensing device on your Entry/Exit door
may have been assigned to zone 01, sensing devices on
windows in the master bedroom to zone 02, and so on. These
numbers will appear on the display, along with an alpha
descriptor for that zone (if programmed), when an alarm or trouble
condition occurs.
Ð 3 Ð
SYSTEM OVERVIEW (cont'd)
Fire Protection
The fire protection portion of your security system (if used) is
always on and will sound an alarm if a fire condition is detected.
Refer to the FIRE ALARM SYSTEM section for important
information concerning fire protection, smoke detectors and
planning emergency exit routes from your house.
Burglary
Protection
The burglary protection portion of your system must be turned on
or "armed" before it will sense burglary alarm conditions. Your
system provides four modes of burglary protection: STAY,
AWAY, INSTANT and MAXIMUM, and even allows you to
BYPASS selected zones of protection while leaving the rest of
the system armed. The system also provides a CHIME mode, for
alerting users to the opening and closing of doors and windows
while the system is disarmed. Refer to the other sections of this
manual for procedures for using these features.
The following table lists the four different arming modes and the
results of each.
Arming
Mode
AWAY
STAY
INSTANT
MAXIMUM
Features For Each Arming Mode
Exit
Entry
Perimeter Interior
Delay
Delay
Armed
Armed
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
No
Yes
No
Yes
Yes
Alarms
When an alarm occurs, both the keypad and external sounders
will sound, and the keypad will display the zone(s) causing the
alarm. If your system is connected to a central monitoring station,
an alarm message will also be sent. To stop the alarm sounding,
simply disarm the system.
Memory of Alarm
When an alarm condition occurs, the keypad displays the
number(s) of the zone(s) that caused the problem, and displays
the type of alarm (ex. FIRE, ALARM). It remains displayed until it
is cleared by disarming the system (see DISARMING THE
SYSTEM section).
Ð 4 Ð
SYSTEM OVERVIEW (cont'd)
Speed Key
(Macros)
The system can store a string of up to 16 keystrokes, which can
be activated anytime by simply pressing the "D" key. This
feature can be used to make it easy to perform a complicated
procedure (such as going to another partition to bypass a zone),
or it can be used to simplify an everyday, repeated procedure.
Refer to the SPEED KEY section for procedures for using this
feature.
Using Schedules
Your system may have been programmed with schedules for
automatically arming, disarming and activating various devices
and/or performing other system functions at predetermined times.
Users can modify some of these schedules by manually delaying
a closing time, using temporary schedules, or by programming
special user schedules. Refer to the USING SCHEDULES
section at the end of this manual for scheduling related
procedures.
Device Timers
The system provides up to 20 "timers" which can be used to
control various devices, such as lights or appliances. These
timers are similar in concept to the individual appliance timers that
might be purchased at a department store. The devices that can
be controlled are programmed into the system by the installer.
Up to 16 of these devices can be programmed. Refer to the
PROGRAMMING DEVICE TIMERS section for procedures.
To Access
Another Partition
(GOTO Command)
Each keypad is assigned a default partition for display purposes,
and will show only that partition's information. But, if the user is
authorized, a keypad in one partition can be used to perform
system functions in another partition by using the G O T O
command. Note that only those partitions authorized and
programmed by the installer can be accessed in this manner.
To GOTO another partition, enter your security code, then press
✱ followed by the desired partition number (1-8).
The keypad will remain in the new partition until directed to go to
another partition, or until 120 seconds has elapsed with no
keypad activity. Entering partition number 0 will return the keypad
to its original partition.
Ð 5 Ð
SYSTEM OVERVIEW (cont'd)
Master Keypad
Operation
A "Master" keypad is one on which the status of all 8 partitions is
displayed simultaneously. A user can get more information about
a certain partition by simply entering ✱ + the desired partition
number (1-8). To log on to the "Master" partition (9) using the
GOTO command, a user must have access to all partitions.
Self-Help Feature
Abbreviated user's instructions are built into the system that can
be easily viewed on the alpha keypad's message display
screen. This feature will prove particularly useful if this manual is
not conveniently accessible when you need to perform a system
procedure with which you are not familiar.
To view the abbreviated instructions:
Simply press and hold down the function key of interest until
the description starts to appear (about 5 seconds) and then
release it.
Refer to the FUNCTIONS OF THE KEYPAD section for
descriptions of each key function.
Phone Access &
Voice Response
Capability
Your system may include a 4285 VIP module that will permit you
to access the system via a Touch-tone phone, either onpremises or by call-in when away. The phone access feature will
enable you to do the following:
¥ Receive synthesized voice messages over the telephone
regarding the status of the security system.
¥ Arm and disarm the system and perform most function
commands via the telephone, with voice confirmation provided
after each command entry.
¥ Control 4204 relays through the #70 Manual Relay Activation
mode.
Complete information regarding the use of this feature is provided
in a separate manual entitled PHONE ACCESS USER'S
GUIDE, which accompanies the 4285 VIP module.
Ð 6 Ð
ABOUT THE KEYPADS
General
IMPORTANT: If the
keypad beeps rapidly
upon entering the
premises, it indicates
that an alarm has
occurred during your
absence. LEAVE
IMMEDIATELY and
CONTACT THE POLICE
from a nearby safe
location.
The Keypad
Your keypads allow you to control all system functions. The
keypads feature a telephone style (digital) keypad and a Liquid
Crystal Display (LCD) which shows the nature and location of all
occurrences. Keypad display back lighting is programmable to
always stay on or to light only when a key is pressed, then turn
off a few minutes later.
The keypads also feature a built-in sounder which will sound
during alarms and troubles. It will also "beep" during certain
system functions, such as during entry/exit delay times, during
CHIME mode, and when depressing keys to arm and disarm the
system (to acknowledge the key press). These sounds can be
optionally suppressed in some of your keypads (so as not to
disturb other users of the system). Ask your installer if this has
been done.
This system uses alpha keypads, which feature a 2-line, 32
character alphanumeric Liquid Crystal Display (LCD). These
keypads can display system messages in friendly English.
Abbreviated user's instructions can also be displayed (see Self
Help paragraph in the SYSTEM OVERVIEW section). These
keypads can also be programmed with custom zone descriptors.
Ð 7 Ð
FUNCTIONS OF THE KEYPAD
Ê
1.
ALPHA DISPLAY WINDOW: A 2-line, 32character Liquid Crystal Display (LCD).
Displays protection point identification and
system status, messages, and user
instructions.
2.
O F F KEY: Disarms the burglary portion of
the system, silences alarms and audible
trouble indicators, and clears visual alarm
trouble after the problem has been corrected.
3.
4.
5.
AWAY KEY:
Completely arms both
perimeter and interior burglary protection by
sensing an intruder's movements through
protected interior areas as well as guarding
protected doors, windows, etc. Late arrivals
can enter through an entry delay zone without
causing an alarm if the system is disarmed
before the entry delay time expires.
S T A Y KEY: Arms the perimeter burglary
protection, guarding protected doors, windows
and other perimeter protection points, and
sounds an alarm if one is opened. Interior
protection is not armed, which allows
movement within your house without causing
an alarm. Late arrivals can enter through an
entry delay zone without causing an alarm if
the system is disarmed before the entry delay
time expires.
MAXIMUM KEY: Arms in manner similar
to AWAY mode, but eliminates the entry delay
period, thus providing maximum protection. An
alarm will occur immediately upon opening any
protection point, including entry delay zones.
6.
T E S T KEY: Tests the system and alarm
sounder if disarmed.
7.
B Y P A S S KEY: R e m o v e s
individual
protection zones from being monitored by the
system. Displays previously bypassed
protection zones.
8.
INSTANT KEY: Arms in manner similar to
STAY mode, but turns off the entry delay
period, offering greater security while inside
and not expecting any late arrivals. An alarm
will occur immediately upon opening any
perimeter protection point, including entry
delay zones.
9.
C O D E KEY: Allows the entry of additional
user codes that can be given to other users of
the system.
10.
C H I M E KEY: Turns on & off the CHIME
mode. When on, any entry through a protected
delay or perimeter zone while the system is
disarmed will cause a tone to sound at the
Keypad(s).
11.
READY KEY: When depressed prior to
arming the system, the keypad will display all
open protection zones within the keypad's
home partition. This key is also used to display
all zone descriptors that have been
programmed for your system, by holding the
key down for at least 5 seconds.
12.
# KEY: Permits ARMING of the system
without use of a security code ("Quick Arm", if
programmed).
KEYS 0-9: Used to enter your individual
security access code(s).
POWER/READY INDICATOR: (GREEN)
On some keypads, this lights when primary
power is on. If off, system is operating on its
backup battery power. CALL YOUR
INSTALLER IMMEDIATELY. On other types of
keypads, lit indicates system is ready to be
armed, while unlit indicates system not ready.
ARMED INDICATOR: (RED) Lit when the
system has been armed (STAY, AWAY,
INSTANT or MAXIMUM).
INTERNAL SOUNDER: Source of audible
internal warning and confirmation sounds, as
well as alarms (see "Summary of Audible
Notifications").
A-B-C PANIC KEYS: Refer to the PANIC
KEYS section for descriptions of these keys.
13.
14.
15.
16.
17.
Ð 8 Ð
1
5
2
3
4
6
15
ARMED
READY
A
A
14
B
B
C
16
C
D
AWAY
1
2
3
MAX
TEST
BYPASS
4
5
6
INSTANT
CODE
CHIME
7
8
9
0
#
STAY
READY
D
17
OFF
*
7
9
10
PANIC
12
LOCATION OF DEDICATED
PANIC KEYS.
KEY D USED AS SPEED
KEY (if programmed)
11
13
8
IMPORTANT!: When using the keypad to enter codes and commands,
sequential key depressions must be made within 3 seconds of one
another. If 3 seconds elapses without a key depression, the entry is
aborted and must be repeated from its beginning.
Ð 9 Ð
ENTRY/EXIT DELAYS
General
Information
Your system has preset time delays, known as exit delay and
entry delay. Whenever you arm your system, exit delay gives
you time to leave through the designated exit door without setting
off an alarm. Exit delay begins immediately after entering any
arming command, and applies to all modes of arming protection. If
programmed, a slow beeping will sound throughout the exit delay
period.
Entry Delay gives you time to disarm the system when you
reenter through the designated entrance door. But the system
must be disarmed before the entry delay period ends, or an alarm
will occur. The keypad will beep during the entry delay period,
reminding you to disarm the system. You can also arm the system
with no entry delay at all by using either INSTANT or MAXIMUM
arming modes. These modes provide greater security while on
the premises or while away for extended periods of time. See
your installer for your delay times.
Ð 10 Ð
SECURITY CODES
& AUTHORITY LEVELS
General
Information
At the time of installation, you were assigned an authority level
and a personal four-digit security code, known only to you and
yours. The security code must be entered when arming and
disarming the system. The authority level defines the system
functions that you can perform.
As an additional safety feature, other users that do not have a
need to know your code can be assigned different security
codes, and each user can be given a different authority level.
Users are identified by "user numbers", which are assigned when
assigning a user's security code.
All codes can be used interchangeably when performing system
functions within the limits of each code's authority level (a system
armed with one user's code can be disarmed by another user's
code), with the exception of the Operator Level C code. See
AUTHORITY LEVELS section on the following page for detailed
information regarding user authority levels.
Duress Code
This feature is intended for use when you are forced to disarm or
arm the system under threat. When used, the system will act
normally, but can silently notify the central station of your
situation, if that service has been provided. The duress code is
pre-assigned by the installer during installation (auth. level 6).
Important: This code is useful only when the system is
connected to a central station.
Quick Arming
Note that if "Quick Arming" was programmed by the installer, the
# key can be pressed in place of the security code when arming
the system. The security code must always be used to disarm
the system, however.
Ð 11 Ð
SECURITY CODES
& AUTHORITY LEVELS (cont'd)
Authority Levels
Authority levels define the system functions a particular user can
perform. Depending on the authority assigned to you, there are
certain system functions you may be prohibited from performing.
In summary, there are six authority levels, each having certain
system restrictions as shown below.
Level/Title
1-Master
Arm/Disarm
Burglary
System
yes
Silence
Alarms, Supv
& Trouble
yes
Add/Change
Security
Codes
yes, levels 26 only
2-Manager
yes
yes
3-Operator A
yes
yes
yes, levels 36 only
no
4-Operator B
5-Operator C
yes
yes, can disarm
only if used to
arm
yes, sends
silent panic
report
yes
yes
yes
6-Duress
Bypass
Zones
Activate Test
Modes
yes, burg.
walk test, fire
drill
no
no
yes, burg
zones (and
fire zones if
enabled)
yes, burg
zones only
yes, burglary
zones only
no
no
no
no
no
no
no
yes, burg.
walk test
no
To view your authority level and system capabilities:
1. Enter your code + ✱ + ✱ .
2. The keypad will display the partition(s) that you are
authorized to operate, and your user number and authority
level in each partition.
Ð 12 Ð
SECURITY CODES
& AUTHORITY LEVELS (cont'd)
General Rules on
Authority Levels
and Changes
¥ A user may not delete or change the user code of the SAME or
HIGHER authority than which he is assigned.
¥ A user may only ADD users to a LOWER authority level.
¥ A user may assign access codes only to those partitions to
which the user adding the code has access. (ex. a user with
access to only partition 1 cannot assign codes in partition 2.)
¥ The only way to assign a user's authority level is by using the
"Add A User" procedure. To change a user's authority level,
that user must first be deleted, then added again.
¥ A user can only be DELETED or CHANGED from within the
partition he is assigned.
¥ User numbers must be entered as 3-digit entries. One- or twodigit user numbers must be preceded by a "0" (example, 003,
004, etc.). Security codes are entered as 4-digit numbers.
¥ Before assigning a security code, be sure it does not conflict
with any DURESS code.
Note: When adding, changing or deleting users, all other alpha
keypads in that partition will display "User Edit Mode Ð Please
Stand By", and key depressions (except Panic) at those
keypads will be ignored. Panic key depressions will cause an
alarm and terminate user entry.
To Exit User Edit
Mode
You can exit any of the user edit modes described on the
following pages at any time by doing the following:
1. Press either ✱ or # , or don't press any key for 10 seconds.
2. System returns to normal mode.
Ð 13 Ð
SECURITY CODES
& AUTHORITY LEVELS (cont'd)
To Add a User
IMPORTANT: Temporary users should not be shown how to
use any system function they do not need to know (e.g.
bypassing protection zones).
CODE
1. Enter Master or Manager code and press the
Ê8Ê key.
2. Enter the new user's 3-digit User Number (002-128).
3. Enter 4-digit security code for that user. The following prompts
will appear.
ADD NEW USER?
0 = NO , 1 = YES
Enter 1 to add a new user code. Entering
0 will change the existing user's code to
the code entered in step 3. See Changing
A User's Code section.
USER NUMBER =
003
ENTER
AUTH.LEVEL
Enter the authority level, 1-6, for this user
within this partition.
1=master
4=operator B
2=manager
5=operator C
3=operator A
6=duress code
RF BUTTON ?
0 = NO , 1 = YES
This prompt will appear if a 5800 series
button transmitter has been supplied and
has not yet been assigned to a user. Press
1 if a button transmitter will be assigned to
this user. Otherwise press 0.
ENTER BUTTON
ZN #
(01-87)
If assigning a button transmitter, this
prompt will appear. Enter the button's
zone number (see your installer for zone
number).
Ð 14 Ð
SECURITY CODES
& AUTHORITY LEVELS (cont'd)
To Add a User
(continued)
MULTI-ACCESS ?
0 = NO , 1 = YES
GLOBAL ARM ?
0 = NO , 1 = YES
PART.2 - SHOP?
0 = NO , 1 = YES
PART. 1 T WHSE
USER
003
AUTH=3G .
Ð 15 Ð
If you as a user have access to other
partitions, the keypad will prompt for ability
of this new user to access (GOTO) those
partitions. Press 0 (NO) or 1 (YES). If no,
the system activates this user code and
exits ÒAdd a UserÓ mode. If yes, the
keypad prompts for the Global Arm option
for this user.
Press 1 (YES) if this user will be allowed to
try to arm more than one partition at the
same time. Press 0 if this user will arm only
his assigned partition.
The keypad now prompts for the userÕs
access to the next partition (see GOTO
command). Again press 0 or 1. If yes, the
system will automatically assign a user
number for use in that partition and will
prompt for the authority level and global
arm option for this user within the partition
(see previous steps).
When all partitions have been displayed,
the keypad will scroll through the
partition(s) to which access has been
assigned, and will display the user
number, authority level and global arm
option for each. The ÒGÓ after the authority
level indicates that the global arm feature is
active for this user in the displayed
partition. The "✴" indicates the partition
from which this user can be changed or
deleted. The "." at the end of the second
line indicates that this user sends
open/close reports. Open/close reporting
is automatically active for any users added
by you, if you have open/close reporting
active.
SECURITY CODES
& AUTHORITY LEVELS (cont'd)
CODE
To Change a
User's Code
1. Enter Master or Manager code and press the
number to be changed.
2. Enter the new code for that user.
8 key + user
ADD NEW USER?
0 = NO , 1 = YES
The system will recognize that the user
number is already in use and will prompt
whether or not this is a new user. Enter 0 to
change the existing user's code to the code
entered in step 3.
USER
002
CHANGED
SUCCESSFULLY
The system will confirm that the change is
allowed based on authorization level, and
if so, will put the new code into effect.
Note that if changing oneÕs own
code, the system will prompt for the new
code to be reentered. This prevents
accidentally changing one's own code.
CODE
To Delete a User
1. Enter Master or Manager code and press the
Number to be deleted.
2. Enter Master or Manager code first entered.
8 key + User
OK TO DELETE
0 = NO , 1 = YES
The system will recognize that the User
number is already in use and will prompt to
confirm that it should be deleted. Press 0
(NO) or 1 (YES).
USER CODE
DELETED
If yes, that user's code will be removed from
all partitions to which it was assigned, and all
authorization levels and other information
about that user will be deleted. Note that a
user can only be deleted from the partition in
which it was first assigned, and can only be
deleted by a user with a higher authority
level. A User's security code cannot be
deleted by oneself.
Ð 16 Ð
ACCESSING OTHER PARTITIONS
(GOTO Command and Global Arming)
To Access
Another Partition
Each keypad is assigned a default partition for display purposes,
and will show only that partition's information. But, if the user is
authorized, a keypad in one partition can be used to perform
system functions in other partitions by using the G O T O
command. Note that only those partitions authorized and
programmed by the installer can be accessed in this manner.
To GOTO another partition:
READY
1. Enter your security code, then press Ê✱Ê + partition
number (0-9).
Entering partition number 0 will return the keypad to its original
partition.
2.
LOG-ON TO
AAAA
PART. X
COMPLETE
The keypad will remain in the new partition
until directed to go to another partition, or
until 2 minutes has elapsed with no
keypad activity.
AAAA = alpha descriptor programmed by
the installer
X = partition number
Global Arming
The Global Arming option may have been programmed for use
by some users. If Global Arming was enabled for use with your
security code, a keypad prompt (message) will appear after
pressing one of the arming function keys (STAY, INSTANT,
AWAY, MAXIMUM, OFF). Follow the keypad prompts to continue
arming the system. See your installer for detailed instructions on
the use of this feature.
If global arming does not apply to your security code, use the
procedures described in the following pages.
Master Keypad
Operation
A "Master" keypad is one that reflects the status of the entire
system (Partitions 1-8) on its display. This is useful because it
eliminates the need for a security officer in a building to have to
"log-on" to various partitions from one partition's keypad to find
out where an alarm has occurred.
A description of a typical display follows:
SYSTEM 12345678
STATUS RRNNA ✴B
Ð 17 Ð
ACCESSING OTHER PARTITIONS
(cont'd)
Master Keypad
Operation
(continued)
The status of each partition is directly below the partition number
on the display. Possible status indications include:
A = Armed Away
M = Armed Maximum
S = Armed Stay
I = Armed Instant
R = Ready
N = Not Ready
B = Bypassed/Ready T = Alarm Memory/Trouble present
To obtain more information regarding a particular partition, enter ✴
+ [Partition No.] (i.e., ✴4). This will allow viewing only of that
partition. In order to affect that partition, the user must log on with
a code that has access to that partition. Also, in order for a user
of any partition to log onto the "Master" partition (Partition 9) to
view the status of all partitions, that user must have access to all
partitions. Otherwise, access will be denied.
The following is an example of what would be displayed for a
fault condition on Zone 2 (Loading Dock Window) on Partition 1
(Warehouse) when logging on from a keypad on Partition 9:
WHSE DISARMED
HIT ✴ FOR FAULTS
This is the normal display that appears at Partition 1's keypad(s).
Pressing ✴ will display:
FAULT 02 LOADING
D O C K W I NDOW
Additional zone faults will be displayed one at a time. To display
a new partition's status, press ✴ + [Partition No.]. This will
display the status of the new partition.
The "Armed" LED on a Master keypad will be lit only if all
partitions have been armed successfully. The "Ready" LED will
be lit only if all partitions are "ready to arm."
The sounder on a Master keypad will reflect the sound of the
most critical condition on all of the partitions. The priority of the
sounds is as follows:
A. Pulsing fire alarm sounds
B. Steady burglar alarm sounds
C. Trouble sounds
The sounder may be silenced by pressing any key on the
Master keypad.
Ð 18 Ð
ACCESSING OTHER PARTITIONS
(cont'd)
Common Lobby
Operation
When an installation consists of a partition shared by users
of other partitions in a building, that shared partition may be
assigned as the "common lobby" partition for the system.
An example of this might be in a medical building where
there are two doctor's offices and a common entrance area .
This option employs logic for automatic arming and
disarming of the common lobby . Partitions may be set to
affect and/or attempt to arm the common lobby. This will
affect the way the lobby will react when arming or disarming
activity occurs in another partition.
Partitions set to affect the lobby will cause the following to
occur:
a. When the first partition that affects the lobby is
disarmed, the lobby will also be disarmed.
b. The common lobby cannot be armed unless every
partition selected to affect the lobby is armed.
c. Arming the last partition that affects the lobby will not
automatically attempt to arm the lobby.
Partitions set to arm the lobby will cause the following to
occur:
a. When the first partition that affects the lobby is
disarmed, the lobby will also be disarmed.
b. The common lobby cannot be armed unless every
partition selected to affect the lobby is armed.
c. Arming the last partition that is programmed to arm the
lobby will automatically attempt to arm the lobby. If any
faults exist in the lobby partition, or another partition that
affects the lobby is disarmed, the lobby cannot be
armed, and the message "UNABLE TO ARM LOBBY
PARTITION" will be displayed.
Ð 19 Ð
ACCESSING OTHER PARTITIONS
(cont'd)
The following chart sums up how the common lobby partition will
operate.
Partition
Affects Lobby
NO
YES
YES
NO
How User Codes
Affect the Common
Lobby
Partition
Arms Lobby
NO
NO
YES
YES
Disarms when
Attempts to arm when Can be armed if
partition disarms?
partition arms?
other partitions
disarmed?
NO
NO
YES
YES
NO
NO
YES
YES
NO
---ENTRY NOT ALLOWED---
Codes with "Global" Arming
If your code is given "global arming" when it is defined the
keypad will ask "Arm all?" or "Disarm all?" whenever you
try to arm or disarm the partitions you have access to from
an alpha keypad. This allows you to pick and choose the
partitions to be armed or disarmed, and so eliminates the
"automatic" operation of the lobby. Keep in mind, however,
that if attempting to arm all, and another "affecting" partition
is disarmed, you will not be able to arm the lobby, and the
message "UNABLE TO ARM LOBBY PARTITION" will be
displayed.
Codes with "Non-Global" Arming
If arming with a non-global code, or if arming with a global
code from a non-alpha keypad, the lobby partition
operation will be automatic, as described in the previous
table.
Other Methods of Arming/Disarming
When arming or disarming a partition that affects and/or arms
the common lobby in one of the following manners, lobby
logic remains active:
¥ Quick-Arm
¥ Keyswitch
¥ Wireless Button
¥ Wireless Keypad
Ð 20 Ð
CHECKING FOR OPEN ZONES
Using the ✱
READY Key
Before arming your system, all protected doors, windows and
other protection zones must be closed or bypassed (see
BYPASSING section). Otherwise the keypad will display a "Not
Ready" message. Using the READY key will display all zones
that are faulted, making it easier for you to secure any open
zones.
To show faulted zones:
DISARMED PRESS
✴ TO SHOW
FAULTS
Note: Some keypads light a green LED
when the system is ready. If not lit, the
system is not ready to be armed.
READY
1. Do not enter security code, but simply press
FAULT 005
FRONT
UPSTAIRS
BEDROOM
2.
DISARMED
READY TO ARM
Ê✱Ê .
Typical fault display
Secure or bypass the zones displayed
before arming the system. The "Ready"
message will be displayed when all
protection zones have been either closed
or bypassed.
NOTE: All or part of this message may be
replaced by a customized message
programmed by the installer. Bear this in mind
whenever the instructions indicate that the
"DISARMED" or "READY" message will be
displayed.
Ð 21 Ð
DISPLAYING ALL
ZONE DESCRIPTORS
Using the ✱
READY Key
The Alpha Keypads can also display all the zone descriptors that
are programmed in your system. The abbreviated instructions for
the R E A D Y key will appear first, followed by the zone
descriptors. Displaying all descriptors is useful when you need to
know the zone number of a particular zone, as when bypassing
zones.
The "Disarmed-Ready to arm" message must be displayed
before zone descriptors can be displayed.
READY
Press the
Ê✱Ê key and hold down for at least 5 seconds.
Ð 22 Ð
BYPASSING ZONES
Using the 6
BYPASS Key
This key is used when you want to arm your system with one or
more zones intentionally unprotected. Bypassed zones are
unprotected and will not cause an alarm when violated while your
system is armed. All bypasses are removed when an OFF
sequence (security code plus OFF) is performed. Bypasses are
also removed if the arming procedure that follows the bypass
command is not successful.
To Bypass a
Zone:
1. Enter the security code. Then press BYPASS [6] and enter
the 3-digit number(s) of zone to be bypassed (ex. 005).
2. BYPASS 007
All bypassed zones will be
sequentially displayed when you are
finished entering the number of zones
to be bypassed. The console will then
display a bypass message as a
Typical bypass
reminder that one or more zones is
message
bypassed.
3.
Arm the system as usual when the
DISARMED
keypad displays the "ready" to arm
BYPASS
message. Bypassed zones are
READY TO ARM
unprotected and will not cause an alarm
when violated while your system is
armed.
Note: All system zone bypasses are removed when an OFF
sequence (security code + OFF) is performed.
FRONT
UPSTAIRS
BEDROOM
Quick Bypass:
Your system allows you to easily bypass all open (faulted)
zones without having to enter zone numbers individually.
Note: All bypasses are removed when an OFF sequence
(security code + OFF) is performed.
To use the Quick Bypass feature:
BYPASS
1. Enter your security code and press Ê6Ê then press # . All
bypassed zones will be sequentially displayed as when
bypassing individual zones (described previously).
Ð 23 Ð
BYPASSING ZONES (cont'd)
Bypassing
System
Supervisory
Zones
NOTE: Ask your installer if your system was set up to
allow system zones and system outputs to be bypassed.
Your system may allow you to bypass certain "system zones"
which monitor various aspects of system status and certain
system outputs which annunciate system status. These zones
and outputs are listed below. This feature is used to disable the
monitoring of one or more system zones or to disable the
operation of one or more system outputs when, for example, the
system is to be serviced or tested. If enabled, this feature can
only be used by a master user.
¥ zone #970: monitors the supervision status of the bell 1
output (if enabled at installation time). Bypassing this zone
disables the operation and supervision of the bell 1 output.
¥ zone #971: monitors the supervision status of the bell 2
output (if enabled at installation time). Bypassing this zone
disables the operation and supervision of the bell 2 output.
¥ zone #972: monitors the panel's field wiring to determine if a
short to earth ground exists. Bypassing this zone disables
earth ground fault monitoring.
¥ zone #973: monitors devices that your installer has connected
to input 1 on the main PCB J2 connector (such as a back-up
ALARMNET radio transmitter). Bypassing this zone causes
the system to ignore the status of devices connected to input
1.
¥ zone #974: monitors the supervision status of the main dialer
output (if enabled at installation time). Bypassing this zone
disables the operation and supervision of the main dialer
output.
¥
¥
¥
zone #975: monitors the supervision status of the back-up
dialer output (if installed and enabled at installation time).
Bypassing this zone disables the operation and supervision
of the back-up dialer output.
zone #976: this zone is assigned to the auxiliary relay output.
Actually, this zone does not monitor anything since the
auxiliary relay output is not supervised. However,
bypassing this zone allows the operation of the auxiliary
relay output to be disabled.
zone #977: this zone is assigned to the ALARMNET radio
trigger outputs. Actually, this zone does not monitor anything
since the ALARMNET triggers are not supervised. However,
bypassing this zone allows the operation of the triggers to be
disabled.
Ð 24 Ð
BYPASSING ZONES (cont'd)
Displaying
Bypassed Zones
Used to determine what zones have been previously bypassed.
Bypassed zones can be displayed only when system is
disarmed.
BYPASS
1. Enter your security code and press
Ê6Ê .
2. Wait for all bypassed zones to be sequentially displayed.
Ð 25 Ð
ARMING PERIMETER ONLY
(With Entry Delay ON)
Using the 3
STAY key
Use this key when you are staying home, but might expect
someone to use the entrance door later.
When armed in STAY mode, the system will sound an alarm if a
protected door or window is opened, but you may otherwise
move freely throughout the premises. Late arrivals can enter
through the entrance door without causing an alarm, but they
must disarm the system within the entry delay period or an alarm
will occur.
Close all perimeter windows and doors before arming (see
CHECKING FOR OPEN ZONES section)
STAY
1. Enter your security code and press
2. ARMED ***STAY***
ZONE BYPASSED
Ê3Ê .
The keypad will beep three times and will
display the armed message.
Note: "ZONE BYPASSED" in this display
simply indicates that the interior zones of
protection are not armed when using
STAY mode.
Ð 26 Ð
ARMING PERIMETER ONLY
(With Entry Delay OFF)
Using the
7 INSTANT Key
Use this key when you are staying home and do not expect
anyone to use the entrance door.
When armed in INSTANT mode, the system will sound an alarm if
a protected door or window is opened, but you may otherwise
move freely throughout the premises. The alarm will also sound
immediately if anyone opens the entrance door.
Close all perimeter windows and doors before arming (see
CHECKING FOR OPEN ZONES section)
INSTANT
1. Enter your security code and press
2. ARMED *INSTANT*
ZONE BYPASSED
Ê7Ê
.
The keypad will beep three times and will
display the armed message.
Note: "ZONE BYPASSED" in this display
simply indicates that the interior zones of
protection are not armed when using
STAY mode.
Ð 27 Ð
ARMING ALL PROTECTION
(With Entry Delay ON)
Using the
2 AWAY Key
Use this key when no one will be staying on the premises.
When armed in AWAY mode, the system will sound an alarm if a
protected door or window is opened, or if any movement is
detected inside the premises. You may leave through the
entrance door during the exit delay period without causing an
alarm. You may also reenter through the entrance door, but must
disarm the system within the entry delay period or an alarm will
occur.
Close all perimeter windows and doors before arming (see
CHECKING FOR OPEN ZONES section)
AWAY
1. Enter your security code and press
2.
ARMED **AWAY**
YOU MAY EXIT
NOW
Ð 28 Ð
Ê2Ê
.
The keypad will beep twice and will display
the armed message.
Note: The "YOU MAY EXIT NOW" portion
of the message disappears when exit
delay expires.
ARMING ALL PROTECTION
(With Entry Delay OFF)
Using the
4 MAXIMUM Key
Use this key when the premises will be vacant for extended
periods of time such as vacations, etc., or when no one will be
moving through protected interior areas.
When armed in MAXIMUM mode, the system will sound an alarm
if a protected door or window is opened, or if any movement is
detected inside the premises. You may leave through the
entrance door during the exit delay period without causing an
alarm, but an alarm will be sounded as soon as someone
reenters.
Close all perimeter windows and doors before arming (see
CHECKING FOR OPEN ZONES section)
MAXIMUM
1. Enter your security code and press
2.
ARMED
*MAXIMUM*
YOU MAY EXIT
NOW
Ð 29 Ð
Ê4Ê
.
The keypad will beep twice and will display
the armed message.
Note: The "YOU MAY EXIT NOW" portion
of the message disappears when exit
delay expires.
DISARMING
AND SILENCING ALARMS
Using the
1 OFF Key
The OFF key is used to disarm the system and to silence alarm
and trouble sounds. See "SUMMARY OF AUDIBLE
NOTIFICATION" section for information which will help you to
distinguish between FIRE and BURGLARY alarm sounds.
IMPORTANT: If you return and the main burglary sounder is on,
DO NOT enter the premises, but call the police from a nearby
safe location. If you return after an alarm has occurred and the
main sounder has shut itself off, the keypad will beep rapidly
upon entering, indicating that an alarm has occurred during your
absence. LEAVE IMMEDIATELY and CONTACT THE POLICE
from a nearby safe location.
To disarm the system and silence burglary or fire alarms:
OFF
1. Enter your security code and press
Ê1Ê .
DISARMED
READY TO ARM
2. The Ready message will be displayed (if no alarms have
occurred while armed) and the keypad will beep once to
confirm that the system is disarmed.
Memory of Alarm
The keypad displays the zone number and type of alarm for any
zone that has an alarm condition. These messages will remain
displayed until cleared by a user. If an alarm has occurred, note
the zone number displayed on the keypad and repeat step 1
above to clear the "Memory of Alarm" and restore the Ready
message display. If the Ready message will not display, go to
the displayed zone and remedy the fault (close windows, etc.). If
the fault cannot be remedied, notify the alarm agency.
If the system was armed when the alarm occurred, repeat step 1
twice: once to disarm the system, a second time to clear the
display.
Ð 30 Ð
USING THE KEYSWITCH
General
Your system may be equipped with a keyswitch for use when
arming and disarming. A red and green light on the keyswitch
plate indicate the status of your system as follows:
Green Light:
Red Light:
Lit Steady:
Slow Flashing:
Rapid Flashing:
Lights when the system is disarmed and
ready to be armed (no open zones). If
the system is disarmed and the green light
is off, it indicates the system is not ready
(one or more zones are open).
Lights when system is armed or memory
of alarm exists.
System is armed in AWAY mode.
System is armed in STAY mode.
Memory of alarm, indicating an alarm has
occurred .
Arming
To arm in the AWAY mode, turn the key to the right for 1/2
second and release. Keypads will beep twice and the red light
will stay on steady.
To arm in the STAY mode, turn the key to the right and hold for
longer than 3 seconds, then release. Keypads will beep three
times and the red light will flash slowly.
Disarming
To disarm the system, turn the key to the right and release. If
an alarm has occurred, the red light will be flashing rapidly
(memory of alarm).
Ð 31 Ð
CHIME MODE
Using the 9 Key
Your system can be set to alert you to the opening of a door or
window while it is disarmed by using CHIME mode. When
activated, three tones will sound at the Keypad whenever a
protected perimeter door or window is opened, and the Not
Ready message will be displayed. Pressing the READY key
will display the open protection points.
Note that Chime mode can be activated only when the system is
disarmed.
1. To turn Chime Mode on, enter the security code and press
Ê9Ê .
CHIME MODE ON
The CHIME MODE ON message will
appear for about two seconds then
disappear. To display this message again
(to determine whether chime mode is on
or off), simply press and hold down the
CHIME key for 5 seconds.
2. To turn Chime Mode off, enter the security code and press
Ê9Ê again.
CHIME MODE OFF
Ð 32 Ð
The CHIME MODE OFF message will
appear for about two seconds then
disappear. To display this message again
(to determine whether chime mode is on
or off), simply press and hold down the
CHIME key for 5 seconds.
VIEWING CENTRAL STATION
MESSAGES
General
Information
Users of the system may periodically receive messages on their
display screens from their monitoring agency or installer. When a
message is waiting to be viewed, the message shown below will
appear.
MESSAGE. PRESS 0
FOR 5 SECS.
1. Press and hold down 0 key for 5 seconds.
2. The message could take up to four screens to display all the
information available.
Ð 33 Ð
PANIC KEYS
(FOR MANUALLY ACTIVATING SILENT AND/OR AUDIBLE
ALARMS)
Using
Panic Keys
Your system may have been programmed to use special key
combinations to manually activate panic functions. The functions
that might be programmed are Silent Emergency, Audible
Emergency, Personal Emergency, and Fire. See your installer for
the function(s) that may have been programmed for your system.
Active Panic Functions
To use a paired key
(your installer should note which
function(s) is active in your system)
Keys
1 and ✱
3 and #
✱ and #
A*
B*
C*
Zone
95
96
99
95
99
96
Function
* May not be present on your keypad(s).
panic function, simply
press both keys of the
assigned pair at the
same time. If your
keypad(s) have lettered
keys for panic functions,
press the designated
key and hold down for at
least 2 seconds to
activate the panic
function.
A silent emergency sends a silent alarm signal to the central
station, but there will be no audible alarms or visual displays.
An audible emergency sends an emergency message to the
central station (if connected) and will sound a loud, steady alarm
at your keypad and at any external sounders that may be
connected (A L A R M plus a zone number would also be
displayed).
A personal emergency alarm sends an emergency message to
the central station (if connected) and will sound at Keypads, but
not at external bells or sirens. (ALARM plus a zone number
would also be displayed)
A fire alarm sends a fire alarm message to the central station and
will uniquely sound external bells and sirens (FIRE plus a zone
number would also be displayed).
Ð 34 Ð
SPEED KEY (MACROS)
General
Information
Defining
The "D" key can be used to activate a string of commands up to
16 keystrokes. These commands are known as a macro and are
stored in the system's memory. Typical Speed Key functions
include:
¥ Seldom used but repeatable sequences.
¥ Arming sequences that involve first bypassing certain zones
before arming.
¥ Relay activation sequences.
Enter your user code + [#] + [D] and hold the [D] key down until the
following appears:
ENTER SPEED KEY "D"
existing sequence displayed
Enter up to 16 keystrokes. A speed key
sequence can include different
commands. Press the "D" key to
separate different commands.
For example, you may want to perform the following sequence.
GOTO partition 2...................Enter *2
Bypass zones 10 & 11..........Press bypass [6], then the zone
numbers 10 & 11
Arm in maximum mode.............Press maximum [4] key
Return to partition 1 ................Enter *1
To program this sequence, type the following :
*2 D 61011 D 4 D *1 D D
Note that the "D" key is pressed after the "2," the last "1" and the
"4," separating the different commands. Press "D" twice to
complete the entry and exit.
Executing
Press and hold down the "D" key (about 2 seconds) until the
following prompt appears:
ENTER USER CODE
✴✴✴✴
Enter your user code. The defined
speed key sequence will begin
automatically.
NOTE: When defining speed key sequences, do not use the [#] key
to represent Quick Arming. The system uses the code entered at the
prompt to initiate commands in a speed key sequence. The system
interprets the use of the [#] key in a speed key sequence as its
designated function only.
Ð 35 Ð
ACCESS DOOR CONTROL
General
Information
Your system may be set up such that a locked access door (such
as in a lobby) can be unlocked using a keypad command. Ask
your installer if this has been done in your system.
To activate this command:
Enter your security code and press 0 .
The door will unlock for 2 seconds.
Ð 36 Ð
USING #70 RELAY MENU MODE
General
Information
Your system may be set up so that certain lights or other devices
can be turned on or off by using the #70 command from either a
keypad or a telephone keypad (if 4285 VIP module is used). Ask
your installer if this has been done in your system.
To activate relays from a keypad, enter 4-digit security code +
[#] +70. Follow the keypad prompts described below.
To activate relays using a telephone and 4285 VIP module,
first dial the 2-digit phone access code. When the system
acknowledges the access, enter 4-digit security code + [#] + 70.
The following prompts/voice responses will begin.
ENTER DEVICE NO.
00=QUIT
01
Voice: "ENTER DEVICE CODE NOW"
NN DEVICE IS OFF
HIT 0=OFF , 1=ON
Voice: "voice descriptor DEVICE nn ON/OFF.
FOR voice descriptor ON ENTER 1, FOR voice
descriptor OFF ENTER 0"
Enter the 2-digit number of the device to be
activated.
Note that if an invalid number is entered, the
system will simply ask you to reenter the
number.
Press 0 or 1 to turn the device off or on
respectively.
"nn" represents the 2-digit device number
and voice descriptor is the relay voice
descriptor programmed by the installer.
NN DEVICE IS OFF
HIT THE "✴" KEY
Voice: "voice descriptor DEVICE nn ON/OFF. TO
EXIT ENTER 00 NOW"
From a keypad, press ✴ to continue. The
ENTER DEVICE NO. prompt will appear.
From a telephone keypad, enter 00 to
exit, or enter the next relay number to be
programmed. The current on/off state of that
relay will be annunciated as described
above. Alternatively, if 6 seconds elapses
with no key depression, the 4285 VIP
module will annunciate the "ENTER DEVICE
CODE NOW" message.
Ð 37 Ð
USING SCHEDULES
Delaying the
Closing Time
Your system's programmed schedules may automatically arm the
system at a predetermined time. In the event a user must stay on
the premises later than usual, users with master or manager
authority levels can manually delay the automatic arming (closing)
time up to 2 hours.
To delay the closing time
1. Enter your security code (master or manager authority
levels only).
2. Press the # key, followed by 82.
3. A menu prompt will be displayed, asking for the number of
hours of delay.
CLOSING
DELAY?
HIT 0-2 HOURS
Enter the desired number of hours of
delay, 1 or 2. The system will
automatically exit this mode after entry.
Note that the delay is from the scheduled closing time,
not from the time the command is entered.
IMPORTANT: The selected delay cannot be reduced
once it is set. A 1 hour delay can be increased to 2 hours,
though.
4. The system will automatically send a message to the central
station informing them that the programmed schedule has
been changed.
Ð 38 Ð
USING SCHEDULES (cont'd)
Temporary
Open/Close
Schedules
Temporary schedules allow you to override the normal schedules
programmed by the installer. Temporary schedules can be in
effect for up to one week, and take effect as soon as they are
programmed.
Schedules are comprised of an arming (closing) time window and
a disarming (opening) time window. A time window is simply a
defined period of time, at the end of which arming or disarming will
occur.
Before programming a temporary schedule, use a worksheet
similar to the one below to plan your schedule. This will make it
easier when actually programming the schedule.
Arm/Disarm
Windows
Disarm Window
Start Time HH:MM
Stop Time HH:MM
Arm Window
Start Time HH:MM
Stop Time HH:MM
Mon
Tue
Ð 39 Ð
Wed
Thu
Fri
Sat
Sun
USING SCHEDULES (cont'd)
Programming
Temporary
Schedules
Temporary schedules only affect the partition from which it is
entered. Temporary schedules can be reused at later dates
simply by scrolling (by pressing #) to the DAYS? prompt
(described below) and activating the appropriate days. This
should be considered when defining daily time windows. Note
that only users with authority level of manager or higher can
program temporary schedules.
To program temporary schedules:
1. Enter your security code.
2. Press the # key followed by 81.
3. The following prompts will appear.
MON
DISARM
WIND.
07:45AM 08:45AM
MON
ARM
WINDOW
07:45AM 08:45AM
Ð 40 Ð
The cursor will be positioned on the tens
of hours digit of the start time for
Monday's disarm window. Enter the
desired hour. Press * to move to the
minutes field. The minutes are entered
in the same manner. The AM/PM
indication is changed by hitting any key,
0-9, while the cursor is under the letter
A/P position. Repeat for the stop time
entry. Press the * key to move to the
arming window for Monday.
Press # to move to the next screen
display without making changes.
The cursor will be positioned on the tens
of hours digit of the start time for the arm
window. Repeat the previous steps to
enter the start and stop time for Monday's
arming window.
USING SCHEDULES (cont'd)
Programming
Temporary
Schedules
(continued)
TUE
DISARM
WIND.
07:45AM
08:45AM
DAYS
MTWTFSS
HIT 0-7 X X
?
Ð 41 Ð
After the windows for that day have
been completed, the system will prompt
for disarm and arm time windows for the
next day. Repeat the procedure for all
days of the week.
When all of the days have been
completed, the system will ask which
days are to be activated.
This is the prompt that actually activates
the temporary schedule, and allows the
temporary schedule to be customized to
a particular week's needs. To select the
days which are to be activated, enter the
desired number 1-7 (Monday = 1). An
"X" will appear under that day, indicating
the previously entered schedule for that
day is active. Entering a day's number
again will deactivate that day. Pressing 0
will turn all days on/off.
The temporary schedule will only be in
effect for the days which have the letter
x underneath them. As the week
progresses, the days are reset to the
deactive state.
When completed, press * to exit the
temporary schedule entry mode.
PROGRAMMING DEVICE TIMERS
General
Information
Device timers consist of an ON time & an OFF time, and selected
days of the week in which they are active. There are up to 20
timers that can be used to control various devices, such as lights
or appliances. Your installer will have programmed the
appropriate devices into the system (up to 16 devices can be
programmed).
Each timer controls a single device (designated as an output
number) that you select. For example, timer 1 might be set to turn
the porch lights on at 7:00pm and turn them off at 11:00pm. Timer
2 might turn on the air conditioner Monday-Friday at 4:30pm to
cool the premises before you arrive at 5:00pm, and turn it off at
10:00pm when you are retiring for the night. If desired, different
timers can control the same device. For example, timer 2 could be
used Monday-Friday as in the previous example, and timer 3
could be set to turn the air conditioner on and off at different times
Saturday and Sunday.
To enter the device timer menu mode:
Enter your security code, then press the # key followed by 83.
OUTPUT TIMER # ?
01-20,00=QUIT 01
Up to 20 timers can be programmed. Each
timer is identified by a number 1-20. Enter
the desired timer number to be programmed
(1-20). Press * to accept entry.
06 07:00P 11:45P
PORCH LITE 04
If that timer number has already been
programmed, a summary screen will appear.
In this example:
06 = Timer #
04 = Output Device # affected by this timer
PORCH LITE = Output Descriptor for Device 4
07:00PM = Start Time;
11:45PM = Stop Time
Press * to continue.
See your installer for
device numbers.
Enter the desired output device number (116). As the number is entered, the device's
description will appear.
00 ENTER
OUTPUT#
00
To delete a previously programmed timer,
enter 00 as the output number.
Ð 42 Ð
PROGRAMMING DEVICE TIMERS
(cont'd)
00 ON TIME ?
00:00 PM
Enter the time you want the device turned
on using 00:01 - 11:59 format. When the
display shows the desired time, press the *
key to move to the AM/PM field. Press any
key 0-9 to change the AM/PM indication.
Enter 00:00 if this timer is not being used to
turn something ON for the days selected
below. (ex. using one timer to turn lights on
one day and using another timer to turn
them off on another day).
00 OFF TIME ?
00:00 PM
Enter the time you want the device turned
off using 00:01 - 11:59 format. When the
display shows the desired time, press the *
key to move to the AM/PM field. Press any
key 0-9 to change the AM/PM indication.
Enter 00:00 if this timer is not being used to
turn something OFF for the days selected
below. (ex. using one timer to turn lights on
one day and using another timer to turn
them off on another day).
00 DAYS?
MTWTFSS
HIT 0-7 X X
Select the days on which the device is to be
activated by entering 1-7 (Monday = 1). An
"X" will appear under that day, indicating the
output for that day is active. Entering a day's
number again will deactivate that day.
Pressing 0 will turn all days on/off. The
outputs will only be in effect for the days
which have the letter x underneath them. As
the week progresses, the selected days are
reset to the inactive state, unless the
permanent option is selected (next screen
prompt). When completed, press * to
continue.
Answering 1 (yes) means the system will
continue executing this timer on a
continuous basis. An answer of 0 means
execute each day's output only once.
00 PERMANENT ?
0 = NO, 1 = YES 0
Ð 43 Ð
TESTING THE BURGLARY
SYSTEM
(TO BE CONDUCTED WEEKLY)
Using the
5 TEST Key
The TEST key puts your system into the Walk Test mode, which
allows each protection point to be checked for proper operation.
1. Disarm the system and close all protected windows, doors,
etc. READY should be displayed.
TEST
2. Enter your security code and press the
5 key.
3. The external sounder should sound for 3 seconds and then
turn off. If the sounder does not sound, it may be due to
dialer communication activity. Wait a few minutes and try
again. If the sounder still does not sound, CALL FOR
SERVICE IMMEDIATELY.
4. The keypad will sound a single beep every 15 seconds as a
reminder that the system is in Test mode.
Note that no alarm reports will be sent to the central
monitoring station while the system is in Test mode.
5. Open and close each protected door and window in turn and
listen for three beeps. The identification of each faulted
protection point should appear on the display.
6. Walk in front of any interior motion detectors (if used) and
listen for three beeps as movement is detected. The
identification of the detector should appear on the display
when it is activated. If a problem is experienced with any
protection point (no confirming sounds, no display), CALL
FOR SERVICE IMMEDIATELY.
7. Turn off Test mode by entering the security code and
pressing the OFF key.
Ð 44 Ð
FIRE ALARM SYSTEM
General
In Case Of Fire
Alarm
Silencing A Fire
Alarm
Your fire alarm system (if installed) is on 24 hours a day,
providing continuous protection. In the event of an emergency,
the installed smoke and heat detectors will automatically send
signals to your Control/Communicator, triggering a loud,
interrupted sound from the Keypad. An interrupted sound will
also be produced by optional exterior sounders. A FIRE message
will appear at your Keypad and remain on until you silence the
alarm.
1. Should you become aware of a fire emergency before your
detectors sense the problem, go to your nearest Keypad and
manually initiate an alarm by pressing the panic key pair
assigned as FIRE emergency (if programmed by the installer)
and hold down for at least 2 seconds.
2. Evacuate all occupants from the premises.
3. If flames and/or smoke are present, leave the premises and
notify your local Fire Department immediately.
4. If no flames or smoke are apparent, investigate the cause of
the alarm. The zone descriptor of the zone(s) in an alarm
condition will appear at the Keypad.
1. Silence the alarm by entering your code and pressing the
OFF key. To clear the display, enter your code and press the
OFF key again.
2. If the Keypad does not indicate a READY condition after the
second OFF sequence, press the READY key to display
the zone(s) that are faulted. Be sure to check that smoke
detectors are not responding to smoke or heat producing
objects in their vicinity. Should this be the case, eliminate the
source of heat or smoke.
3. If this does not remedy the problem, there may still be smoke
in the detector. Clear it by fanning the detector for about 30
seconds.
4. When the problem has been corrected, clear the display by
entering your code and pressing the OFF key.
Ð 45 Ð
TESTING THE FIRE SYSTEM
Fire Drill Test
(code + [#] + 69)
This test causes fire bells to be activated (in either steady
or pulsing manner as programmed in the system) for the
purpose of conducting a fire drill or a bell test. This test can
only be activated by the installer or a master user as
follows:
1. Enter the corresponding security code and press [#] +
69 (make sure the burglary portion of the system is
disarmed). Consoles will display "FIRE DRILL ACTIVE"
while this test is active.
2. The test may be stopped by entering any security
code and pressing OFF.
Note that the system continues to monitor all 24 hour
zones (fire, panic, etc.) while this test is active, and will
end the test when an alarm condition is detected. This
test should be conducted at periodic intervals as
determined by the local authority having jurisdiction.
Ð 46 Ð
TROUBLE CONDITIONS
Typical Trouble
Displays
The word C H E C K or T R B L on the Keypad's display,
accompanied by a rapid "beeping" at the Keypad, indicates that
there is a trouble condition in the system.
To silence the beeping sound for "check" conditions, press
any key.
1. A display of "CHECK" or "TRBL" accompanied by a display
of "CALL SERVICE" indicates that a problem exists with the
system that eliminates some of the protection. CALL FOR
SERVICE IMMEDIATELY.
2. A display of "CHECK" or "TRBL" accompanied by a display
of one or more zone descriptors indicates that a problem
exists with those zone(s)*. First, determine if the zone(s)
displayed are intact and make them so if they are not. If the
problem has been corrected, key an OFF sequence (Security
Code plus OFF) to clear the display. If the display persists,
CALL FOR SERVICE IMMEDIATELY.
3. A display of "CHECK" or "TRBL" accompanied by a numeric
display of "6XX," where XX = 01-16, indicates a trouble on a
supervised relay (corresponding relay number 01-16)
4. A display of "CHECK" or "TRBL"accompanied by a numeric
display of "8XX," where XX = 00-31, indicates a trouble on a
peripheral device (connected to the panel's keypad terminals)
of the corresponding device address (00-31)
5. A display of "CHECK" or "TRBL" accompanied by a numeric
display of "9XX," where XX = 00-99, indicates that a system
trouble exists (dialers, bell outputs, ground fault, etc). These
zones are as follows:
975: Dialer 2
970: Bell 1 Output
987: Voice Module
971: Bell 2 Output
988: 2nd RF Receiver 972: Earth Ground Fault
not receiving signals
973: J2 Trigger Output
990: 1st RF Receiver 974: Dialer 1
not receiving signals
If the problem has been corrected, enter the [Security Code]
plus [OFF] twice to clear the display.
Ð 47 Ð
TROUBLE CONDITIONS (cont'd)
6. A display of "COMM. FAILURE" at the Keypad indicates
that a failure has occurred in the telephone communication
portion of your system. CALL FOR SERVICE
IMMEDIATELY.
7. A display of "SYSTEM LO BAT" per minute "beeping" at the
Keypad indicates that a low system battery condition exists.
CALL FOR SERVICE IMMEDIATELY.
8. A display of "LO BAT" and a zone descriptor, accompanied
by a once per minute "beeping" at the Keypad indicates that
a low battery condition exists in the wireless transmitter**
displayed. CALL FOR SERVICE IMMEDIATELY.
9. A display of "MODEM COMM" indicates that the control is
on-line with the central station's remote computer. The control
will not operate while on-line.
Power Failure
If the POWER indicator is off, operating power for the system
has stopped and is inoperative. CALL FOR SERVICE
IMMEDIATELY. If the POWER indicator is on, but the message
"AC LOSS" is displayed, the Keypad is operating on battery
power only. If only some lights are out on the premises, check
circuit breakers and fuses and reset or replace as necessary.
CALL FOR SERVICE IMMEDIATELY if AC power cannot be
restored.
SERVICING INFORMATION
Your local Ademco dealer is the person best qualified to service
your alarm system. Arranging some kind of regular service
program with him is advisable.
Your local Ademco dealer is:
Name:
Address:
Phone:
Ð 48 Ð
RECOMMENDATIONS
FOR PROPER PROTECTION
THE FOLLOWING RECOMMENDATIONS FOR THE LOCATION OF FIRE AND
BURGLARY DETECTION DEVICES HELP PROVIDE PROPER COVERAGE
FOR THE PROTECTED PREMISES.
RECOMMENDATIONS FOR SMOKE AND HEAT DETECTORS
With regard to the number and placement of smoke/heat detectors, we
subscribe to the recommendations contained in the National Fire Protection
Association's (NFPA) Standard #72 noted below.
Early warning fire detection is best achieved by the installation of fire
detection equipment in all rooms and areas of the household as follows:
For minimum protection a smoke detector should be installed outside of
each separate sleeping area, and on each additional floor of a multi-floor
family living unit, including basements. The installation of smoke
detectors in kitchens, attics (finished or unfinished), or in garages is not
normally recommended.
For additional protection the NFPA recommends that you install heat or
smoke detectors in the living room, dining room, bedroom(s), kitchen,
hallway(s), attic, furnace room, utility and storage rooms, basements and
attached garages.
✪
KITCHEN
▲
DINING
✪
✪
✪
BEDROOM BEDROOM
TV ROOM
▲
KITCHEN
✪
DINING
LIVING ROOM
■
■
✪
✪
LIVING ROOM
BEDROOM
■
✪
✪
BDRM
BDRM
✪
BEDROOM
✪
▲
■ Smoke Detectors for Minimum Protection
✪ Smoke Detectors for Additional Protection
▲ Heat-Activated Detectors
■
BEDROOM
✪
■
✪
BEDROOM
TO
BR
BEDROOM
■
▲
▲
KTCHN
.
LVNG RM
■
BASEMENT
Ð 49 Ð
CLOSED
DOOR
GARAGE
RECOMMENDATIONS
FOR PROPER PROTECTION (cont.)
In addition, we recommend the following:
¥ Install a smoke detector inside every bedroom where a smoker sleeps.
¥ Install a smoke detector inside every bedroom where someone sleeps
with the door partly or completely closed. Smoke could be blocked by
the closed door. Also, an alarm in the hallway outside may not wake up
the sleeper if the door is closed.
¥ Install a smoke detector inside bedrooms where electrical appliances
(such as portable heaters, air conditioners or humidifiers) are used.
¥ Install a smoke detector at both ends of a hallway if the hallway is more
than 40 feet (12 meters) long.
¥ Install smoke detectors in any room where an alarm control is located, or
in any room where alarm control connections to an AC source or phone
lines are made. If detectors are not so located, a fire within the room could
prevent the control from reporting a fire or an intrusion.
RECOMMENDATIONS FOR PROPER INTRUSION PROTECTION
For proper intrusion coverage, sensors should be located at every
possible point of entry to a home or commercial premises. This would
include any skylights that may be present, and the upper windows in a
multi-level building.
In addition, we recommend that radio backup be used in a security system
so that alarm signals can still be sent to the alarm monitoring station in the
event that the telephone lines are out of order (alarm signals are normally
sent over the phone lines, if connected to an alarm monitoring station).
Ð 50 Ð
EMERGENCY EVACUATION
Establish and regularly practice a plan of escape in the event of fire. The following
steps are recommended by the National Fire Protection Association:
1. Position your detector or your interior and/or exterior sounders
so that they can be heard by all occupants.
2. Determine two means of escape from each room. One path of
escape should lead to the door that permits normal exit from
the building. The other may be a window, should your path
be impassable. Station an escape ladder at such windows if
there is a long drop to the ground.
3. Sketch a floor plan of the building. Show windows, doors,
stairs and rooftops that can be used to escape. Indicate
escape routes for each room. Keep these routes free from
obstruction and post copies of the escape routes in every
room.
4. Assure that all bedroom doors are shut while you are asleep.
This will prevent deadly smoke from entering while you
escape.
5. Try the door. If the door is hot, check your alternate escape
route. If the door is cool, open it cautiously. Be prepared to
slam the door if smoke or heat rushes in.
6. Where smoke is present, crawl on the ground; do not walk
upright. Smoke rises and may overcome you. Clearer air is
near the floor.
7. Escape quickly; don't panic.
8. Establish a common meeting place outdoors, away from your
house, where everyone can meet and then take steps to
contact the authorities and account for those missing. Choose
someone to assure that nobody returns to the house Ñ many
die going back.
Ð 51 Ð
MAINTAINING YOUR SYSTEM
Taking Care of
Your System
Replacing
Batteries in
Wireless Sensors
Wireless sensors
may not have been
used in your security
system
The components of your security system are designed to be as
free of maintenance as possible. However, there are some things
you can do to make sure that your system is in reliable working
condition.
1. Test your system weekly.
2. Test the system after any alarm occurs (see TESTING THE
SYSTEM).
Each wireless sensor in your system has a 9-volt or 3-volt
battery. The system detects a low battery in any wireless
sensor, including smoke detectors, the optional personal
emergency transmitter, and the optional portable wireless
keypad. (A low battery in a portable wireless keypad is detected
as soon as one of its keys is pressed, and the keypad will
display 00.)
Alkaline batteries provide a minimum of 1 year of operation, and in
most units and applications, provide 2Ð4 years of service. Actual
battery life will depend on the environment in which the sensor is
used, the number of signals that the transmitter in the sensor has
had to send, and the specific type of sensor. Factors such as
humidity, high or low temperatures or large swings in temperature,
may all lead to the reduction of actual battery life in an installation.
If you have a low battery in a wireless sensor, a low
battery message is displayed on the keypad.
In addition, a battery-operated smoke detector with a low battery
also emits a single "chirp" sound once approximately every 2030 seconds, identifying itself as the smoke detector with the weak
battery. If you do not replace a smoke detector's low battery, the
smoke detector may sound continuously, as if there were a fire
alarm.
Note: The low battery message comes on as a warning that
battery replacement in indicated sensor(s) is due within 30 days.
In the meantime, the sensor(s) causing the low battery indication
is still fully operational.
Important:ÊÊUse only batteries recommended by your installer
as replacement.
Ð 52 Ð
MAINTAINING YOUR SYSTEM
(cont'd)
Silencing Low
Battery Warning
Tones at the
Keypad
The keypadÕs warning tones can be silenced by performing an
OFF sequence (code plus OFF key), but the Keypad's low
battery message display will remain on as a reminder that you
have a low battery condition in one or more of your sensors.
When you replace the weak battery with a fresh one, the sensor
will send a "good battery" signal to the control as soon as the
sensor is activated (opening/closing of door, window, etc.),
causing the low battery display to turn off. If the sensor is not
activated, the display will automatically clear within
approximately 1 hour.
Routine Care ¥ Treat the components of your security system as you would any
other electrical equipment. Do not slam sensor-protected doors or
windows.
¥ Keep dust from accumulating on the keypad and all protective
sensors, particularly on motion sensors and smoke detectors.
¥ The keypad and sensors should be cleaned carefully with a dry
soft cloth. Do not spray water or any other fluid on the
units.
Ð 53 Ð
QUICK GUIDE TO
SYSTEM FUNCTIONS
FUNCTION
PROCEDURE
Check Zones
Press [✱]
Display All
Descriptors
Arm System
Press and hold [✱]
for 5 seconds
Enter code
Press arming key desired
(AWAY, STAY, INSTANT,
MAXIMUM)
Enter code
Press OFF [1]
Enter code
Press BYPASS [6]
Enter zone numbers to be
bypassed (use 2-digit entries)
Enter code
Press BYPASS [6]
Press [#]
Enter code
Press CHIME [9]
Disarm System
Bypass zones
Quick Bypass
Chime Mode
COMMENTS
Test Mode
Enter code
View Messages
Press and hold [0] for at least
5 seconds.
Enter user's code
Press [✱] + [✱]
View User
Capabilities
Ð 54 Ð
To view faulted zones when system not
ready.
Displays all alpha descriptors programmed
by installer.
Arms system in mode selected.
Disarms system and silences alarms.
Bypassed zones are unprotected and will
not cause an alarm if violated.
Bypasses all faulted zones automatically.
Keypad will sound if doors
or windows are violated while system
disarmed.
Sounds alarm sounder and allows sensors
to be tested.
Press TEST [5]
Message from central station will appear.
Displays partitions & authority
levels assigned to the user.
QUICK GUIDE TO
SYSTEM FUNCTIONS
FUNCTION
PROCEDURE
COMMENTS
GOTO Partition
Enter security code
Press [✱]
Enter partition number (1-8)
0 returns to default partition
Enter master/manager code
Press CODE [8]
Enter new user's user number
Enter code for that user
At prompt, enter authority for
that user in this partition (1-5)
Follow prompts, 1=Yes, 0=No
Enter master/manager code
Press CODE [8]
Enter user's 2-digit number
Enter new code for that user
Press 0 (No) at prompt.
Enter master/manager code
Press CODE [8]
Enter user no. to be deleted
Enter master/manager code
Press 1 (Yes) at prompt.
Press and hold any function
key for at least 5 seconds.
Allows a user at one keypad to perform
functions in another partition,
if that user is authorized to do so.
Add a User
Change a user's
Code
Delete a User
Self-Help
Ð 55 Ð
Master & Manager level users can add
users to the system, each with its own
code and authority level.
Master & Manager level users can change
their own or other users' codes.
Master & Manager level users can delete
users.
A user can only be deleted by a user with
higher authority level.
Will display abbreviated instructions for the
key pressed.
SUMMARY OF AUDIBLE
NOTIFICATION
(ALPHA DISPLAY KEYPADS)
DISPLAY
SOUND
CAUSE
LOUD,
INTERRUPTED*
Keypad & External
LOUD,
CONTINUOUS*
Keypad & External
ONE SHORT
BEEP
(not repeated)
Keypad only
FIRE ALARM
FIRE is displayed; descriptor of zone in alarm is displayed.
BURGLARY/AUDIBLE
EMERGENCY ALARM
ALARM is displayed; descriptor of zone in alarm is also
displayed.
a. SYSTEM DISARM
b. SYSTEM ARMING ATTEMPT
WITH AN OPEN ZONE.
c. BYPASS VERIFY
a. DISARMED/READY TO ARM is displayed.
b. The number and descriptor of the open protection zone is
displayed.
SYSTEM IS IN TEST MODE
c. Numbers and descriptors of the bypassed protection zones
are displayed (One beep is heard for each zone displayed).
Subsequently, the following is displayed: DISARMED
BYPASS Ready to Arm
Opened Zone identifications will appear.
LOW BATTERY AT A TRANSMITTER
LO BAT displayed with description of transmitter.
TWO SHORT
BEEPS
Keypad only
THREE SHORT
BEEPS
Keypad only
ARM AWAY OR MAXIMUM
ARMED AWAY or ARMED MAXIMUM is displayed. Red
ARMED indicator is lit.
a. ARM STAY OR INSTANT
RAPID BEEPING
Keypad only
a. TROUBLE
b. AC POWER LOSS ALERT***
c. MEMORY OF ALARM
SLOW BEEPING
Keypad only
a. ENTRY DELAY WARNING**
a. ARMED STAY ZONE BYPASSED or ARMED INSTANT
ZONE BYPASSED is displayed. Red ARMED indicator is lit.
b. CHIME displayed, descriptor of open protection zone will be
displayed if the [✱] key is pressed.
c. DISARM SYSTEM OR ALARM WILL OCCUR is
displayed.
a. CHECK displayed. Descriptor of troubled protection zone
is displayed.
b. AC LOSS displayed (may alternate with other displays that
may be present).
c. FIRE or ALARM is displayed; descriptor of zone in alarm
is displayed.
a. DISARM SYSTEM OR ALARM WILL OCCUR is
displayed. Exceeding the delay time without disarming causes
alarm.
b. ARMED AWAY or ARMED MAXIMUM is displayed
along with You May Exit Now
ONE SHORT
BEEP
(once every 15
seconds) Keypad
only
ONE BEEP every
60 sec. Keypad
only
b. ZONE OPENED WHILE SYSTEM
IS IN CHIME MODE.
c. ENTRY WARNING**
b. EXIT DELAY WARNING
(if programmed)
*
**
If bell is used as external sounder, fire alarm is pulsed ring; burglary/audible emergency is steady ring.
Entry warning may consist of three short beeps or slow continuous beeping, as programmed by your
installer.
*** Loss of system battery power is not indicated or annunciated by the keypad (warnings are for loss of
AC power only).
Ð 56 Ð
GLOSSARY
The following terms are used throughout the manual.
ARM/DISARM:
KEYPAD:
ZONE:
PARTITION:
BYPASS:
DELAY ZONE:
DAY/NIGHT ZONE:
"Armed" simply means that the burglary portion of your system
is turned ON and is in a state of readiness. "Disarmed" means
that the burglary system is turned OFF, and must be rearmed to
become operational. However, even in a "disarmed" state,
"emergency" and "fire" portions of your system are still
operational.
This is the area on your Keypad containing numbered
pushbuttons similar to those on telephones or calculators.
These keys control the arming or disarming of the system, and
perform other functions which were previously described in this
manual.
A specific area of protection.
An independent group of zones that can be armed and
disarmed without affecting other zones or users.
To disarm a specific area of burglary protection while leaving
other areas operational.
An area of protection containing doors most frequently used to
enter or exit (typically, a front door, back door, or door from the
garage into the building). The delay zone allows sufficient time
for authorized entry or exit without causing an alarm. Consult
your installer for the entry and exit delay times that have been
set for your system during installation and record them on the
separate sheet provided in this manual.
An area of protection whose violation causes a trouble
indication during the disarmed (DAY) mode and an alarm during
the armed (NIGHT) mode.
Ð 57 Ð
UL NOTICE: This is a "GRADE A" system.
"FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 15 STATEMENT"
This equipment has been tested to FCC requirements and has been found acceptable for use. The FCC
requires the following statement for your information:
This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in
strict accordance with the manufacturer's instructions, may cause interference to radio and television
reception. It has been type tested and found to comply with the limits for a Class B computing device in
accordance with the specifications in Part 15 of FCC Rules, which are designed to provide reasonable
protection against such interference in a residential installation. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
¥ If using an indoor antenna, have a quality outdoor antenna installed.
¥ Reorient the receiving antenna until interference is reduced or eliminated.
¥ Move the receiver away from the control/communicator.
¥ Move the antenna leads away from any wire runs to the control/communicator.
¥ Plug the control/communicator into a different outlet so that it and the receiver are on different branch
circuits.
If necessary, the user should consult the dealer or an experienced radio/television technician for additional
suggestions.
The user or installer may find the following booklet prepared by the Federal Communications Commission
helpful: "Interference Handbook"
This booklet is available from the U.S. Government Printing Office, Washington, DC 20402.
The user shall not make any changes or modifications to the equipment unless authorized by the Installation
Instructions or User's Manual. Unauthorized changes or modifications could void the user's authority to
operate the equipment.
IN THE EVENT OF TELEPHONE OPERATIONAL PROBLEMS
In the event of telephone operational problems, disconnect the control by removing the plug from the RJ31X
(CA38A in Canada) telephone wall jack. We recommend that your certified installer demonstrate
disconnecting the phones on installation of the system. Do not disconnect the phone connection inside the
control/communicator. Doing so will result in the loss of your phone lines. If the regular phone works
correctly after the control/communicator has been disconnected from the phone lines, the
control/communicator has a problem and should be returned for repair. If upon disconnection of the
control/communicator, there is still a problem on the line, notify the telephone company that they have a
problem and request prompt repair service. The user may not under any circumstances (in or out of
warranty) attempt any service or repairs to the system. It must be returned to the factory or an authorized
service agency for all repairs.
Ð 58 Ð
"FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 68 NOTICE
This equipment complies with Part 68 of the FCC rules. On the front cover of this equipment is a
label that contains, among other information, the FCC registration number and ringer equivalence
number (REN) for this equipment. If requested, this information must be provided to the
telephone company.
This equipment uses the following jacks:
An RJ31X is used to connect this equipment to the telephone network.
The REN is used to determine the quantity of devices which may be connected to the telephone
line. Excessive RENs on the telephone line may result in the devices not ringing in response to
an incoming call. In most, but not all areas, the sum of the RENs should not exceed five (5.0). To
be certain of the number of devices that may be connected to the line, as determined by the total
RENs, contact the telephone company to determine the maximum REN for the calling area.
If this equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. If advance notice is not
practical, the telephone company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures
that could affect the operation of the equipment. If this happens, the telephone company will
provide advance notice in order for you to make the necessary modifications in order to maintain
uninterrupted service.
If trouble is experienced with this equipment, please contact the manufacturer for repair and
warranty information. If the trouble is causing harm to the telephone network, the telephone
company may request you remove the equipment from the network until the problem is resolved.
There are no user serviceable components in this product, and all necessary repairs must be
made by the manufacturer. Other repair methods may invalidate the FCC registration on this
product.
This equipment cannot be used on telephone company-provided coin service. Connection to
Party Line Service is subject to state tariffs.
This equipment is hearing-aid compatible.
When programming or making test calls to an emergency number, briefly explain to the dispatcher
the reason for the call. Perform such activities in the off-peak hours; such as early morning or late
evening.
Ð 59 Ð
CANADIAN DEPARTMENT OF COMMUNICATIONS
(DOC) STATEMENT
NOTICE
The Canadian Department of Communications label identifies
certified equipment. This certification means that the
equipment meets certain telecommunications network
protective, operational and safety requirements. The
Department does not guarantee the equipment will operate to
the user's satisfaction.
Before installing this equipment, users should ensure that it is
permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be
installed using an acceptable method of connection. In some
cases, the company's inside wiring associated with a single
line individual service may be extended by means of certified
connector assembly (telephone extension cord). The
customer should be aware that compliance with the above
conditions may not prevent degradation of service in some
situations.
Repairs to certified equipment should be made by an
authorized Canadian maintenance facility designated by the
supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to
disconnect the equipment.
Users should ensure for their own protection that the
electrical ground connections of the power utility, telephone
lines and internal metallic water pipe system, if present, are
connected together. This precaution may be particularly
important in rural areas.
Caution: User should not attempt to make such connections
themselves, but should contact the appropriate electric
inspection authority, or electrician, as appropriate.
The Load Number (LN) assigned to each terminal device
denotes the percentage of the total load to be connected to a
telephone loop which is used by the device, to prevent
overloading. The termination on a loop may consist of any
combination of devices subject only to the requirement that
the total of the Load Numbers of all the devices does not
exceed 100.
AVIS
L'Žtiquette du minist•re des Communications du Canada
identifie le matŽriel homologuŽ. Cette Žtiquette certifie que le
matŽriel est conforme ˆ certaines normes de protection,
d'exploitation et de sŽcuritŽ des rŽseaux de
tŽlŽcommunications. Le minist•re n'assure toutefois pas que
le matŽriel fonctionnera ˆ la satisfaction de l'utilisateur.
Avant d'installer ce matŽriel, l'utilisateur doit s'assurer qu'il
est permis de le raccorder aux installations de l'entreprise
locale de tŽlŽcommunications. Le matŽriel doit Žgalement
•tre installŽ en suivant une mŽthode acceptŽe de
raccordement. Dans certains cas, les fils intŽrieurs de
l'entreprise utilisŽs pour un service individuel ˆ la ligne
unique peuvent •tre prolongŽs au moyen d'un dispositif
homologuŽ de raccordement (cordon prolongateur
tŽlŽphonique interne). L'abonnŽ ne doit pas oublier qu'il est
possible que la conformitŽ aux conditions ŽnoncŽes ci-dessus
n'emp•chet pas la dŽgradation du service dans certaines
situations. Actuellement, les entreprises de
tŽlŽcommunications ne permettent pas que l'on raccorde leur
matŽriel aux prises d'abonnŽs, sauf dans les cas precis
prŽvus par les tarifs particuliers de ces entreprises.
Les rŽparations du matŽriel homologuŽ doivent •tre
effectuŽes pas un centre d'entretien canadien autorisŽ dŽsignŽ
par le fournisseur. La compagnie de tŽlŽcommunications peut
demander ˆ l'utilisateur de dŽbrancher un appareil ˆ la suite
de rŽparations ou de modifications effectuŽes par l'utilisateur
ou ˆ cause de mauvais fonctionnement.
Pour sa propre protection, l'utilisateur doit s'assurer que tous
les fils de mise en terre de la source d'Žnergie Žlectrique, des
lignes tŽlŽphoniques de rŽseau de conduites d'eau s'il y en a,
soient raccordŽs ensemble. Cette prŽcaution est
particuli•rement importante dans les rŽgions rurales.
Avertissement: L'utilisateur ne doit pas tenter de faire ces
raccordements lui-m•me; il doit avoir recours ˆ un service
d'inspection des installations Žlectriques, ou ˆ un Žlectricien,
selon le cas.
L'indice de charge (IC) assignŽ ˆ chaque dispositif terminal
pour Žviter toute surcharge indique le pourcentage de la
charge totale qui peut •tre raccordŽ ˆ un circuit tŽlŽphonique
bouclŽ utilisŽ par ce dispositif. La terminaison du circuit
bouclŽ peut •tre constituŽe de n'importe quelle combinaison
de dispositifs, pourvu que la somme des indices de charge de
l'ensemble des dispositifs ne dŽpasse pas 100.
Ð 60 Ð
WARNING!
THE LIMITATIONS OF THIS ALARM SYSTEM
While this system is an advanced design security system, it does not offer guaranteed protection against
burglary or fire or other emergency. Any alarm system, whether commercial or residential, is subject to
compromise or failure to warn for a variety of reasons. For example:
¥ Intruders may gain access through unprotected openings or have the technical sophistication to bypass
an alarm sensor or disconnect an alarm warning device.
¥ Intrusion detectors (e.g. passive infrared detectors), smoke detectors, and many other sensing devices
will not work without power. Battery operated devices will not work without batteries, with dead batteries,
or if the batteries are not put in properly. Devices powered solely by AC will not work if their AC power
supply is cut off for any reason, however briefly.
¥ Signals sent by wireless transmitters may be blocked or reflected by metal before they reach the alarm
receiver. Even if the signal path has been recently checked during a weekly test, blockage can occur if a
metal object is moved into the path.
¥ A user may not be able to reach a panic or emergency button quickly enough.
¥ While smoke detectors have played a key role in reducing residential fire deaths in the United States, they
may not activate or provide early warning for a variety of reasons in as many as 35% of all fires, according
to data published by the Federal Emergency Management Agency. Some of the reasons smoke detectors
used in conjunction with this System may not work are as follows. Smoke detectors may have been
improperly installed and positioned. Smoke detectors may not sense fires that start where smoke cannot
reach the detectors, such as in chimneys, in walls, or roofs, or on the other side of closed doors. Smoke
detectors also may not sense a fire on another level of a residence or building. A second floor detector,
for example, may not sense a first floor or basement fire. Moreover, smoke detectors have sensing
limitations. No smoke detector can sense every kind of fire every time. In general, detectors may not
always warn about fires caused by carelessness and safety hazards like smoking in bed, violent
explosions, escaping gas, improper storage of flammable materials, overloaded electrical circuits,
children playing with matches, or arson. Depending upon the nature of the fire and/or the locations of the
smoke detectors, the detector, even if it operates as anticipated, may not provide sufficient warning to
allow all occupants to escape in time to prevent injury or death.
¥ Passive Infrared Motion Detectors can only detect intrusion within the designed ranges as diagrammed in
their installation manual. Passive Infrared Detectors do not provide volumetric area protection. They do
create multiple beams of protection, and intrusion can only be detected in unobstructed areas covered by
those beams. They cannot detect motion or intrusion that takes place behind walls, ceilings, floors,
closed doors, glass partitions, glass doors, or windows. Mechanical tampering, masking, painting or
spraying of any material on the mirrors, windows or any part of the optical system can reduce their
detection ability. Passive Infrared Detectors sense changes in temperature; however, as the ambient
temperature of protected area approaches the temperature range of 90° to 105°F, the detection
performance can decrease.
Ð 61 Ð
WARNING!
THE LIMITATIONS OF THIS ALARM SYSTEM
(continued)
¥ Alarm warning devices such as sirens, bells or horns may not alert people or wake up sleepers if they are
located on the other side of closed or partly open doors. If warning devices sound on a different level of
the residence from the bedrooms, then they are less likely to waken or alert people inside the bedrooms.
Even persons who are awake may not hear the warning if the alarm is muffled from a stereo, radio, air
conditioner or other appliance, or by passing traffic. Finally, alarm warning devices, however loud, may
not warn hearing-impaired people or waken deep sleepers.
¥ Telephone lines needed to transmit alarm signals from a premises to a central monitoring station may be
out of service or temporarily out of service. Telephone lines are also subject to compromise by
sophisticated intruders.
¥ Even if the system responds to the emergency as intended, however, occupants may have insufficient
time to protect themselves from the emergency situation. In the case of a monitored alarm system,
authorities may not respond appropriately.
¥ This equipment, like other electrical devices, is subject to component failure. Even though this equipment
is designed to last as long as 10 years, the electronic components could fail at any time.
The most common cause of an alarm system not functioning when an intrusion or fire occurs is inadequate
maintenance. This alarm system should be tested weekly to make sure all sensors and transmitters are
working properly.
Installing an alarm system may make one eligible for lower insurance rates, but an alarm system is not a
substitute for insurance. Homeowners, property owners and renters should continue to act prudently in
protecting themselves and continue to insure their lives and property.
We continue to develop new and improved protection devices. Users of alarm systems owe it to themselves
and their loved ones to learn about these developments.
Ð 62 Ð
INDEX
Instant ................................... 4, 10, 18, 25
Keypads ................................................ 7
Keyswitch ............................................ 29
Lo Bat ................................................. 44
Low Battery .......................................... 50
Low Battery Warning .............................. 51
Maintenance ......................................... 50
Manager .............................................. 13
Master ................................................. 13
Maximum ..................................... 4, 18, 27
Memory Of Alarm ................................ 4, 28
Modem Comm ....................................... 44
No AC ............................................. 10, 45
Not Ready ....................................... 10, 20
Off ............................................ 18, 28, 46
Open Zones .......................................... 20
Open/Close Schedules ........................... 37
Operator A ........................................... 13
Operator B ........................................... 13
Operator C ........................................... 13
Panic Keys ........................................... 32
Partitioned Security System ...................... 3
Partitioned System .................................. 3
Personal Emergency .............................. 32
Power .................................................. 45
Quick Arming ........................................ 12
Quick Bypass ....................................... 23
Ready .................................. 10, 20, 30, 46
Ready Key ...................................... 20, 21
Replacing Batteries ................................ 50
Schedules ......................................... 5, 36
Security Code ....................................... 12
Security Codes ..................................... 12
Sensing Devices ..................................... 3
Silence The Alarm .................................. 46
Silent Emergency .................................. 32
Smoke Detectors ................................... 43
Stay .................................. 4, 10, 18, 24, 29
System Lo Bat ...................................... 44
Temporary Schedules ........................ 37, 38
Temporary Users ................................... 15
Test Key .............................................. 42
Time Window ......................................... 37
Trouble Condition ................................... 44
User Edit Mode ...................................... 14
User Numbers ....................................... 12
User's Instructions .................................. 6
4285 VIP Module ................................ 6, 35
Wireless Sensor .................................... 50
Zone Bypassed ..................................... 24
Zone Descriptors ................................... 21
97= Call Service .................................... 45
AC ...................................................... 10
AC Loss ............................................... 45
Access Another Partition ........................ 18
Access Door ......................................... 34
Add A User ........................................... 15
Ademco Dealer ...................................... 45
Alarm ............................................... 4, 10
Alpha .................................................... 7
Alpha Keypads ........................................ 7
Armed ................................................... 4
Audible Emergency ................................ 32
Authority Level ...................................... 12
Authority Levels ................................. 3, 14
Away ................................. 4, 10, 18, 26, 29
Bat ................................................ 10, 45
Burglary ................................................. 3
Burglary Protection .................................. 4
Bypass ................................................ 10
Bypass Zones ....................................... 22
Bypassing ............................................ 22
Call Service .......................................... 44
CC ...................................................... 45
Change A User's Code ............................ 17
Check ............................................ 10, 44
Chime .......................................... 4, 10, 30
Closing Time ......................................... 36
Code ................................................... 15
Comm. Failure ....................................... 44
Delaying The Closing Time........................ 36
Delete A User ........................................ 17
Descriptors .......................................... 21
Device Timers .................................... 5, 40
Disarm ................................................. 28
Duress ................................................ 13
Duress Code ......................................... 12
Emergency ............................................. 3
Entry Delay .......................................... 11
Entry/Exit .............................................. 3
Exit Delay ............................................ 11
Exit User Edit Mode ................................ 14
FC ...................................................... 45
Fire ........................................ 3, 10, 32, 46
Fire Emergency ..................................... 46
Fire Protection ........................................ 4
Fixed-Word ............................................. 7
Fixed-Word Keypad Displays ................... 10
Fixed-Word Keypads ................................ 7
Global Arming ....................................... 18
Goto .............................................. 16, 18
Goto Command ....................................... 5
Ð 63 Ð
ADEMCO ONE YEAR LIMITED WARRANTY
Alarm Device Manufacturing Company, a Division of Pittway Corporation, and its divisions, subsidiaries and
affiliates ("Seller"), 165 Eileen Way, Syosset, New York 11791, warrants its security equipment (the
"product") to be free from defects in materials and workmanship for one year from date of original purchase,
under normal use and service. Seller's obligation is limited to repairing or replacing, at its option, free of
charge for parts, labor, or transportation, any product proven to be defective in materials or workmanship
under normal use and service. Seller shall have no obligation under this warranty or otherwise if the product
is altered or improperly repaired or serviced by anyone other than the Seller. In case of defect, contact the
security professional who installed and maintains your security equipment or the Seller for product repair.
This one year Limited Warranty is in lieu of all other express warranties, obligations or liabilities. THERE ARE
NO EXPRESS WARRANTIES, WHICH EXTEND BEYOND THE FACE HEREOF. ANY IMPLIED
WARRANTIES, OBLIGATIONS OR LIABILITIES MADE BY SELLER IN CONNECTION WITH THIS
PRODUCT, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A
PARTICULAR PURPOSE OR OTHERWISE, ARE LIMITED IN DURATION TO A PERIOD OF ONE YEAR
FROM THE DATE OF ORIGINAL PURCHASE. ANY ACTION FOR BREACH OF ANY WARRANTY, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, MUST BE BROUGHT WITHIN 12
MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL SELLER BE LIABLE TO ANYONE
FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY, EXPRESS OR IMPLIED, OR UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER, EVEN
IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLER'S OWN NEGLIGENCE OR FAULT. Some states do
not allow limitation on how long an implied warranty lasts or the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
Seller does not represent that the product may not be compromised or circumvented; that the product will
prevent any personal injury or property loss by burglary, robbery, fire or otherwise; or that the product will in
all cases provide adequate warning or protection. Buyer understands that a properly installed and
maintained alarm may only reduce the risk of a burglary, robbery, fire or other events occurring without
providing an alarm, but it is not insurance or a guarantee that such will not occur or that there will be no
personal injury or property loss as a result. CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY FOR
ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED ON A CLAIM THE PRODUCT
FAILED TO GIVE WARNING. HOWEVER, IF SELLER IS HELD LIABLE, WHETHER DIRECTLY OR
INDIRECTLY, FOR ANY LOSS OR DAMAGE ARISING UNDER THIS LIMITED WARRANTY OR OTHERWISE,
REGARDLESS OF CAUSE OR ORIGIN, SELLER'S MAXIMUM LIABILITY SHALL NOT IN ANY CASE
EXCEED THE PURCHASE PRICE OF THE PRODUCT, WHICH SHALL BE THE COMPLETE AND EXCLUSIVE
REMEDY AGAINST SELLER. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. No increase or alteration, written or verbal, to this warranty is
authorized.
A DIVISION OF PITTWAY CORPORATION
165 Eileen Way, Syosset, New York 11791
Copyright © 1995 PITTWAY CORPORATION
àN6020-2sä
N6020-2 Rev B 4/99
EVENT LOGGING PROCEDURES
General Information
The system has the ability to record
various events in a history log wherein
each event is recorded in one of five
categories (listed below), with the time
and date of its occurrence. The Event
Log holds up to 224 events, with the
oldest event being replaced by the
logging of any new event after the log is
full. Using an alpha keypad, the Event
Log can be viewed one category at a
time, or can display all events, regardless
of category (ALL EVENT LOG). The
system also allows selection of
displaying the COMPLETE log, or only
those events occurring since the last
installer service (RECENT). In addition,
events in the other partitions can be
viewed by users authorized to access
those partitions. Note that events are
displayed in chronological order, from
most recent to oldest.
To Display The Event Log
1. Enter CODE + [#] + [6] + [0]
2. Select the display mode.
RECENT: Displays only those
events occurring since last installer
service.
COMPLETE: Displays complete
event log (up to 224 events).
Press the desired key, 0 or 1.
ENTER 0 = RECENT
1 = COMPLETE
3. Select the partition, 0-8.
Enter the partition number for the
partition whose events are to be
displayed.
Entering 0 (NO) will display all
partitions' events.
SCAN LOG BY PART
0=NO 1-8=PART #
Side A of N6020-2 Rev B
EVENT LOGGING PROCEDURES (cont'd)
4. Use the [3] & [1] keys (for next and
previous categories respectively) to
display the categories of events.
Press [8] to select a category and
display the first event. Press [8] again for
each subsequent event.
Shows burglary alarm occurred in zone 3
(C03) of partition 1 (P1), at 12:02AM on
January 1.
P1 01/01
12:02AM
BURGLARY
C03
Typical Event
Log Display
After the last event has been
displayed, the END OF EVENT LOG
message appears for a few seconds, then
the system automatically displays the
RECENT/COMPLETE mode select
screen again (see step 2).
5. To EXIT the Event Log:
Press [✱] at any time.
ALARM EVENT LOG
TYPE
CCC UUU
ALARM EVENT LOG
Displays time and date for zones that have
either caused an alarm or have been restored
in the selected partition.
CHECK EVENT LOG
Displays time and date for zones that have
caused a trouble or supervisory condition in
the selected partition.
BYPASS EVENT LOG
Displays time and date for zones that have
been bypassed in the partition.
OPEN EVENT LOG
Displays time, date and user number for each
arming and disarming of the system for the
partition selected.
SYSTEM EVENT LOG
Displays time and date for system problems,
such as AC Loss, low battery, etc., regardless
of partition.
ALL EVENT LOG
Displays all categories of events in
chronological order.
See your Installer for
additional information
concerning the event
log.
Side B
Typical Category
Select Screen
Download PDF

advertising