Vista | VLFSM19D_h | User`s manual | Vista VLFSM19D_h User`s manual

USER’S
MANUAL
VISTA 15”/17"/19” TFT LCD MONITOR
MODEL: VLFSM15D/17D/19Dh Series
1
Table of Contents
● FCC Information
-2
● CE Information
-2
● Safety Precautions
-3
1. General Features
-4
2. Setting Up
-5
3. Controls and Indicators
-6
4. On Screen Display
-8
1
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Shielded interface cables and A.C. power cord, if any, must be used in order to comply with
emission limits.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
CE INFORMATION
The product must be installed according to the currently valid installation regulations for
EMC to guarantee the designed use and to prevent EMC problems.
The device supplied with this manual is according to the EC, EMC Directive, 89/336/EEC &
LVD 73/23/EEC
Standard used for showing compliance with the essential requirements of the device:
EN 55022
EN 61000-3-2
EN 61000-3-3
EN 50130-4
EN 55024
LVD: EN 60950-1
2
SAFETY PRECAUTIONS
1. Do not modify the three-prong grounding type monitor power plug in any way.
2. Operate this unit only from the type of power source indicated on the label.
3. Do not block or cover ventilation openings on the back or bottom of the monitor cabinet.
4. Do not place this monitor near a radiator or heating vent.
5. Do not push objects of any kind through cabinet openings. This may result in fire or
electrical shock.
6. Before adding attachments always ask a service technician to perform routine safety
tests to determine that equipment is in safe operating condition. Ground potential tests
should be part of the routine safety check made by the service technician.
7. Do not place monitor on an unstable cart, stand, or shelf where it may fall and injure
personnel or damage equipment.
8. Route power cords so that they cannot be walked upon or tripped over. Do not allow
anything to rest on the power cord.
9. Do not install monitor in wet areas, or where it may be exposed to rain or water. Do not
spill liquid of any kind on the unit.
10. Unplug the power cord from the unit before cleaning the display. Use only
a damp cloth. Do not use alcohol, spirits, or ammonia to clean the display.
DO NOT ATTEMPT TO CLEAN THE INTERIOR OF THIS UNIT- THIS ACTION
MUST BE PERFORMED BY THE SERVICE TECHNICIAN AS REQUIRED
DURING NORMAL MAINTENANCE.
11. Refer all servicing to qualified service personnel. REMOVAL OF BACK
COVER BY UNAUTHORIZED PERSONNEL MAY EXPOSE THE USER TO
DANGEROUS VOLTAGES OR OTHER HAZARDS.
12. Unplug the unit immediately and notify the service technician.
A. If liquid has been spilled into the display or the display has been
exposed to rain or water.
B. If the unit has been dropped or the cabinet damaged.
C. If fuses continue to blow.
D. If the power cord is damaged or frayed.
E. If a distinct change from normal operation is apparent.
When replacement parts are required, be sure that the service technician uses components
specified by the manufacturer which have the same characteristics as the original parts.
UNAUTHORIZED SUBSTITUTIONS MAY RESULT IN FIRE, ELECTRICAL SHOCK OR
OTHER HAZARDS.
Upon completion of any service or repairs, ask the technician to perform safety checks to
determine that the equipment is in safe operating condition.
WARNING: SERIOUS SHOCK HAZARDS EXIST WITHIN THE COVERS OF THIS
MONITOR. DO NOT OPEN THE COVERS UNDER ANY CIRCUMSTANCES,
THERE ARE NO USER SERVICEABLE COMPONENTS INSIDE
3
1. GENERAL FEATURES
This is a high performance TFT LCD monitor up to 1280X1024 SXGA resolution.
The LCD monitor has been designed for use with both PC and Video, comply with
the power management regulations of VESA DPMS, supported by Plug & Play,
complying with DDC1/2B.
FEATURES
100~240V AC Power Supply
NTSC/PAL Auto-Detect
High Resolution
PC Input
Video Input
Audio Input
Y/C Input
OSD With Multiple Languages
4
2. SETTING UP
Read this chapter for important safety information and how to
set up and connect the display to your computer or camera.
․Check the attachment of monitor. There is power cord, power adapter
user's manual and PC signal cable.
․Make sure the surface for placing the LCD monitor is stable and level.
․Keep the monitor away from sources of liquids and moisture.
․Keep the monitor's vents free from obstruction.
․If you will not be using the monitor and computer for a day or more,
turn off both devices.
2.1 CONNECT THE MONITOR TO YOUR COMPUTER
․Make sure the computer is turned off.
․Plug in the monitor.
․Connect the PC signal cable from the computer to the monitor.
․Turn on the computer.
․Push the power button in front of the monitor.
․Push the Auto button to display PC input signal.
2.2 CONNECT THE MONITOR TO THE VIDEO SOURCE
․Plug in the monitor.
․Connect the video signal to the monitor.
․Push the power button in front of the monitor.
․Push the Auto button to display video input signal.
5
3. CONTROLS AND INDICATORS
3.1 FRONT PANEL
A. SELECT INPUT/ AUTO-ADJ/EXIT BUTTON
․Press the button to display the input signal which are selected on the screen.
․Press the button for 2 sec. to go into auto adj. function.
․Press the button to exit OSD menu.
B. UP(+), DOWN(-) BUTTONS
․Press UP(+) / DOWN(-) buttons to move the cursor to wanted parameter to be set up
in OSD main menu.
․Press UP (+)/ DOWN(-) buttons to adjust the value of selected parameter in sub OSD
menu.
C. MENU BUTTON
․Press the button to show the main OSD menu.
․As a confirmation key during the OSD operation.
D. POWER LED identification
․Green- Power on
․Black- Power off
․Orange- Stand by
․Flash Orange- Sleep mode
E. POWER BUTTON
․Press the button to turn on or turn off the monitor.
6
F. KEY-LOCK FUNCTION
․Key lock- Push A+C+E button for10sec .Then the OSD Show “Key Locked”
․Key unlocked- Push A+C+E button for 10sec .Then the OSD Show “Key Unlocked”
3.2 I/O CONNECTORS
VLFSM15/17D_h
A. DC 12V input
B. DVI-I(PC) input
C. CVBS input
D. S-VIDEO input
E. AUDIO input
VLFSM19D_h
A. AUDIO input
B. S-VIDEO input
C. CVBS input
D. DVI-I(PC) input
E. DC 12V input
7
4. ON SCREEN DISPLAY (OSD)
Press Up(+), Down(-) buttons to select an icon, Press MENU button to change
the values in the sub menu, then press AUTO button to exit OSD menu.
Luminance:Adjust the contrast & brightness value.
Image Setup:Omit at video mode. (Focus, Clock)
Image Position:Omit at video mode. (H/V Position)
Color Temp:VGA/DVI - Set the color temperature of the LCD monitor.
VIDEO - Set the Tint Saturation and Sharpness value.
Input Select:Input source select.
8
OSD Setup:Adjust the OSD window position and display time.
Language:Select the language to be used in OSD.
[ ENGLISH / FRENCH / ITALIAN / GERMAN / SPANISH ]
Information:Monitor information.
Reset:Factory Recall and Line-Lock. Note: When Link-Lock ON, the screen will
change according to input signal.
EXIT:Exit OSD menu.
9
MODEL
DESCRIPTION
Panel type
Screen size
Viewable size
Dot pitch
VLFSM15D_h
VLFSM17D_h
15” TFT color LCD panel
17” TFT color LCD panel
381mm diagonal
431mm diagonal
304.1mm (H) x 228.1mm (V)
337.9mm (H) x 270.3mm (V)
0.297mm x 0.297mm
0.264mm x 0.264mm
70/70/60/65
70/70/65/65
500:1
500:1
Viewing angle (L/R/T/B)
Contrast ration
Brightness
250 cd/m²
300 cd/m²
Resolution
1024x768
1280x1024
16.2M colors
16.2M colors
Display color
Response time
16ms
12ms
100 – 240Vac
100 – 240Vac
18W
29W
372x374x190 (with Base)
372x325x54(no Base)
372x374x190 (with Base)
372x325x54(no Base)
Power input
Power consumption
Dimension (Physical)
WxHxD mm
Weight (Physical)
Wall Mount
DVI-I (PC)
Input
signal
DVI-I (DVI)
Video
Audio
Input
3.3Kgs
3.8Kgs
VESA STD
VESA STD
FH: 31K –60KHz
FV: 50 – 75Hz
Signal:
RGB - 0.707Vp-p / 75 ohm,
H/V Sync – standard TTL input
XGA(1024X768/60Hz)
SXGA(1280X1024/60Hz)
Signal: TMDS
NTSC/PAL composite video,
Connector:
1 BNC for CVBS input,
1 mini-din 4pin for S-video
Level: 1.0Vp-p / 75 ohm
Level: 1.0Vp-p / 1 KHz, connector: Phone-Jack
Speaker
User’s control
FH: 31K –80KHz
FV: 50 – 75Hz
Internal 2 x 1W
Power key, Menu / + / - / Auto key(i)
Plug & Play
Power Management
Regulation
Specification is subject to change without notice.
DDC2B
VESA DPMS compatible
CE UL, CUL, FCC-B
MODEL
VLFSM19D_h
DESCRIPTION
Panel type
19” TFT color LCD panel
Screen size
Viewable size
480mm diagonal
376.32mm (H) x 301.06mm (V)
Dot pitch
0.294mm x 0.294mm
Viewing angle (L/R/T/B)
70/70/75/60
Contrast ration
550:1
Brightness
270 cd/m²
Resolution
1280x1024
Display color
16.2M colors
Response time
8ms
Power input
100 – 240Vac
Power consumption
38W
420X431.5X190mm (with Base)
420X431.5X54.5mm (no Base)
Dimension (Physical)
WxHxD mm
Weight (Physical)
5Kgs
Wall Mount
DVI-I (PC)
Input
signal
DVI-I (DVI)
Video
Audio
Input
VESA STD
FH: 31K –80KHz
FV: 50 – 75Hz
Signal: RGB - 0.707Vp-p / 75 ohm,
H/V Sync – standard TTL input
SXGA(1280X1024/60Hz)
Signal: TMDS
NTSC/PAL composite video,
Connector:
1 BNC for CVBS input,
1 mini-din 4pin for S-video
Level: 1.0Vp-p / 75 ohm
Level: 1.0Vp-p / 1 KHz, connector: Phone-Jack
Speaker
User’s control
Internal 2 x 1W
Power key, Menu / + / - / Auto key(i)
Plug & Play
Power Management
Regulation
Specification is subject to change without notice.
DDC2B
VESA DPMS compatible
CE UL, CUL, FCC-B
Vista
Norbain House
Eskdale Road
Winnersh Triangle
WOKINGHAM
3121-0795G02
Bekshire
Printed in Taiwan
England
RG41 5TS
Phone: +44(0) 118 944 0123
Fax:
+44(0) 118 944 0999
www.vista-cctv.com
Download PDF

advertising