Quick Coupling
Products
Catalog 3800 USA
February 2005
The World Standard
Parker Quick Coupling Division Locations
Minneapolis, Minnesota
Grantsburg, Wisconsin
Lincoln, Nebraska
Chetek, Wisconsin
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH,
PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, it's subsidiaries and authorized distributors provide product and/or system options for further investigation by
users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product
catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final
selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its
subsidiaries at any time without notice.
Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed
by the provisions stated in the “Offer of Sale.”
© 2005, Revised February 2005 , Parker Hannifin Corporation, All Rights Reserved.
Quick Coupling Division
8145 Lewis Road
Minneapolis, MN 55427
Hydraulic Quick Couplings ..........Section B
Introduction .............................................................B-2
Coupling Selection Guide .......................................B-4
General Purpose.....................................................B-5
Non-Spill................................................................B-20
Connect-Under-Pressure ......................................B-35
High Pressure .......................................................B-44
Mold Coolant Line .................................................B-48
High Flow ..............................................................B-53
Special Purpose - Miniature..................................B-58
Dust Plugs and Caps ............................................B-60
Ordering Information .............................................B-63
Promotional Products-Keychains..........................B-64
Thermoplastic Couplings .............Section C
Coupling Section Guide ..........................................C-3
Spectrum Series .....................................................C-4
PF Series ................................................................C-8
Ordering Information.............................................C-10
Introduction..............................................................F-2
Selection Guide .......................................................F-4
ServiceJunior...........................................................F-5
SensoControl® Serviceman™ .................................F-6
Serviceman™ Transducer.......................................F-8
SensoControl® ServiceMaster™...........................F-11
ServiceMaster™ Transducer.................................F-14
PDF Series Flow Sensors .....................................F-17
Test Port Couplings ...............................................F-18
Ordering Information .............................................F-27
Appendices ................................................I-V
Fluid Compatibility Chart .............................................I
Safety Guide ...............................................................II
Alpha Numeric Index .................................................III
Glossary of Terms .....................................................IV
Offer of Sale ...............................................................V
Corporate Overview ........................Inside Back Cover
Swivels ...........................................Section D
Appendices
Introduction .............................................................D-2
PS Series ................................................................D-4
PS Series In-Line Swivels.......................................D-6
PS Series 90° Swivels ..........................................D-15
PS Series Repair Kits ...........................................D-26
S Series Swivels ...................................................D-27
S Series Repair Kits..............................................D-33
C Thermoplastics
Diagnostic Products
(SensoControl®)..............................Section F
D Swivels
Introduction .............................................................E-2
Features & General Technical Information..............E-4
DT Series ................................................................E-5
CV Series ................................................................E-9
Ordering Information .....................................E-8, E-11
E Check Valves
Check Valves ..................................Section E
Introduction ............................................................A-2
Coupling Selection Guide ......................................A-4
Interchange Match-up Chart .................................A-5
Industrial Interchange Nipples ...............................A-6
General Purpose ...................................................A-8
Special Purpose ..................................................A-33
Accessories .........................................................A-41
F Diagnostic
Pneumatic Quick Couplings ........Section A
B Hydraulics
A Pneumatics
Table of Contents
Quick Coupling Products
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
A Pneumatics
Pneumatic
Quick
Couplings
A-1
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
Introduction
Pneumatic Quick Couplings
Single Shut-Off Couplings
The standard seal material for all Parker Single Shut-Off
couplers is Nitrile. Ethylene Propylene, Fluorocarbon, and
Neoprene seals are available as options. See the
comprehensive Fluid Compatibility Chart that provides
guidelines for seal and body material selection. When there
is need for further assistance in selecting the appropriate
seal material, please consult factory.
Single Shut-Off couplings are primarily used for pneumatic
applications, connecting air tools, hoses, or other implements
to compressed air supplies. They are also used with other
gases, and with the exception of the E-z-mate Series can be
used with low pressure fluids. The coupler half contains a
shut-off valve that is automatically opened when a mating
nipple is inserted and automatically closes when the nipple is
removed.
Parker Single Shut-Off couplings come in three basic
designs: general purpose/manual connect, general
purpose/push-to-connect, and special purpose.
General Ordering Information
the ground. It is always recommended that the Quick
Coupling Division be contacted with any questions
concerning specific product application needs.
Typically, a prefix or suffix is added to the base part number
to specify a non-standard O-ring seal, or special option such
as a sleeve lock. The list at right illustrates the designations.
When ordering Parker coupler bodies and nipples, please
state the part number of each type of coupler body and each
type of nipple desired. List coupler bodies and nipples as
separate items rather than in combinations. Be sure to double
check thread or hose sizes of items required.
Many of Parker’s coupling products are available with unique
non-standard options well suited to very specific applications.
Examples of unusual end use applications might include:
high temperatures (above 250° F), extremely
caustic/corrosive solutions passing through the coupling,
external/environmental corrosion situations, or other high
wear and tear situations such as dragging the product along
Please Note: Certain couplings series have additional
“Special Order Information” which should be referred to in
ordering those products. If applicable to the product, “Special
Order Information” is found next to the Features and
Specifications charts. See the Coupling Selection and
Ordering Guide for further information.
Checklist for Selecting Quick Couplings
❑ What are the functional requirements of the coupling?
❑ What is the maximum working pressure of the application?
❑ Which seals and body material are compatible with the system’s fluid?
❑ Is the application static or dynamic?
❑ What size coupler is required?
❑ What is the maximum pressure drop suitable for the application?
❑ Does the application require the ability to connect and disconnect under pressure?
❑ What is the media temperature and ambient temperature?
❑ What end configurations are required?
❑ Is an industry interchange coupler required?
❑ Is air inclusion and fluid loss a concern in the application?
A-2
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
30 Series ..................................................A-27 to A-30
Couplers ...............................................A-29 to A-30
Twist-Lock Couplings ............................................A-31
Couplers ............................................................A-32
Nipples...............................................................A-32
Introduction ..............................................................A-2
Coupling Selection & Ordering Guide...................A-4
Interchange Match-up Chart...................................A-5
Industrial Interchange Nipples ...................A-6 to A-7
General Purpose Couplings
Special Purpose Couplings
Manual Connect....................................................A-8
10 Series.................................................................A-9
Couplers ............................................................A-10
Nipples...............................................................A-11
20 Series...............................................................A-12
Couplers ............................................................A-13
50 Series...............................................................A-14
Couplers ............................................................A-14
Nipples...............................................................A-15
70 Series...............................................................A-16
Couplers ............................................................A-16
Nipples...............................................................A-16
Standard - Non Marring Composite .................A-33
Tool-Mate Series Couplers ...................................A-34
Exhaust - Non Marring Composite ...................A-35
Tool-Mate Series Couplers ...................................A-36
Exhaust - Steel....................................................A-37
E-z-mate Series ....................................................A-37
Couplers ............................................................A-38
Breathing Air
CJ Series ..............................................................A-39
Couplers ............................................................A-40
Nipples...............................................................A-40
Accessories
Hose Fittings .........................................................A-41
Blow Guns
Controlled Pressure ..........................................A-42
Full Pressure ....................................................A-42
BG Series .............................................................A-43
Two-Way Valves ...................................................A-44
Push-to-Connect.................................................A-17
RF Series ..............................................................A-18
Couplers ............................................................A-19
Nipples...............................................................A-20
Tool-Mate Series ...................See pages A-33 to A-36
HF Series .............................................................A-21
Couplers – 1/8"..................................................A-22
Nipples – 1/8" ....................................................A-22
Couplers – 1/4", 3/8" & 1/2”...............................A-23
HF Series Heavy Duty Couplers – 1/4" & 3/8" .....A-24
HA Series..............................................................A-25
Couplers ............................................................A-25
Nipples...............................................................A-15
Universal Coupler .................................................A-26
Couplers ............................................................A-26
A-3
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
Table of Contents
Pneumatic Quick Couplings
A Pneumatics
Coupling Selection & Ordering Guide
Pneumatic Quick Couplings
Coupler
Style
Body
Material*
Interchange Size (in.) B SS S P
Locking
Mechanism
Std. Seal**
Material
Std. Seal**
Temp Range
Rated
Pressure
Ball
Nitrile
-40° to +250° F
300 PSI
●
Ball
Nitrile
-40° to +250° F
300 PSI
●
Ball
Nitrile
-40° to +250° F
300 PSI
Ball
Nitrile
-40° to +250° F
300 PSI
General Purpose – Manual Connect
10 Series
Manual
Tru-Flate
1/4 to 1/2
●
Manual
Industrial
1/4 to 1/2
●
50 Series
Manual
ARO 210
1/4
●
70 Series
Manual
Lincoln
(long stem)
1/4
●
20
Series 1
●
●
General Purpose – Push-To-Connect
RF Series
Push to Connect CEJN 320/410 1/4 & 3/8
Rectus 25/27
HF Series
Push to Connect
Industrial
1/8 2
to 1/2
●
●
Ball
Nitrile
-40° to +250° F
300 PSI
●
●
Ball
Nitrile
-40° to +250° F
300 PSI
30 Series
Push to Connect
Industrial
1/4 to 3/4
●
Pawl
Nitrile
-40° to +250° F
300 PSI
HA Series
Push to Connect
ARO 210
1/4
●
Ball
Nitrile
-40° to +250° F
300 PSI
Twist Lock
Push to Connect
Schrader
1/4 to 1/2
●
Universal
Push to Connect
Industrial
Tru-Flate
ARO 210
1/4
●
●
Cam
Nitrile
-40° to +250° F
300 PSI
Ball
Nitrile
-40° to +250° F
150 PSI
Ball
Nitrile
-40° to +250° F
300 PSI
Ball
Nitrile
-40° to +250° F
150 PSI
Fingers
Nitrile
-40° to +250° F
300 PSI
Special Purpose – Push-To-Connect
E-z-mate Series
Exhaust/
Push to Connect
Industrial
1/4 to 3/4
CJ Series
Push to Connect
CEJN
342/343
1/4
Tool-Mate Series
Push to Connect/
Exhaust & Std
Industrial &
CEJN 320 /
Rectus 25
1/4 to 1/2
●
●
●
20 Series Stainless Steel available in 1/4” body.
1/8 “ couplings have no standard industry interface.
3 Tool-Mate metal end ports are Galvanized Steel.
3
●
1
2
* Material Code:
B = Brass; SS = Stainless Steel; S = Steel; P= Plastic
Coupling Material
** Optional Seals
Coupler
• Prefix “B” for Brass - available for 3/8 & 1/2” body sizes only
• Suffix “N” for Stainless Steel springs, locking balls
and brass valves. (10, 20, 30, 50, and 70 series only)
Nipple
• Prefix “B” for Brass (Standard material is steel)
Material
Suffix
TEMP Range
Ethylene Propylene
Fluorocarbon
W
Y
-65° to +400° F
-30° to +400° F
To select proper seal materials, see Fluid Compatibility Chart in
Appendices section, or contact your Parker Quick Coupling Distributor.
A-4
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Popular Coupling Designs
Parker’s Quick Coupling Division manufactures quick
couplings to interchange with popular designs that have
become accepted standards in the industry today. The actual
10 Series
(Tru-Flate Interchange)
size nipple chart below can be used to help select Parker
Quick Couplings that will interchange with specific nipple
designs and sizes.
50 Series
20 Series, 30 Series,
HF Series, E-z-mate
(ARO-210 Interchange)
(Industrial Interchange)
1/8" HF Series
1/4" Body Size
1/4" Body Size
1/8" Body Size
70 Series
(Lincoln Interchange)
3/8" Body Size
1/4" Body Size
1/4" Body Size
RF Series
1/2" Body Size
3/8" Body Size
Twist-Lock
1/4" Body Size
(Schrader Interchange)
1/2" Body Size
1/4" Body Size
3/8" Body Size
CJ Series
(CEJN 342/343 Interchange)
1/2" Body Size
3/4" Body Size
A-5
1/4" Body Size
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
Interchange Match-up Chart
Pneumatic Quick Couplings
A Pneumatics
Industrial Interchange Nipples
Pneumatic Quick Couplings
Features
• Parker Industrial Interchange nipples are for use with any
Parker 20 Series, HF Series, 30 Series, Universal, HF or Ez-mate couplers.
• Precision machined surfaces and hardened load-bearing
areas** resist the effects of mechanical shock in the most
rugged applications.
• Parker Industrial Interchange nipples are interchangeable
with similar nipples manufactured by other quick coupling
manufacturers conforming to A-A-59439 (formerly known
as MIL-C-4109F), ANSI/(NFPA) T3.20.14-1990, or
ISO6150-B requirements.
• The 20 Series, HF Series, 30 Series, Universal and
E-z-mate couplers that mate with the Industrial Interchange
nipples are located in their respective coupling “Type” (e.g.
Manual Type) as noted in the Table of Contents.
** steel nipples only
• Hardened wear points** and solid barstock construction
provide extended service life.
Female Pipe Thread
D
E
G
F
Body
Size
(in.)
Part
No.
Brass
Part
No.
Steel
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
3/4
3/4
3/4
–
BH3C
–
–
BH3E
–
–
BH3F
–
–
–
–
H1C
H3C
H3C-E
H1E
H3E
H3E-F
H1F
H3F
H3F-G
H3G-F
H3G
H3G-J
Part No.
Type 303
Stainless
Thread
Size
NPTF
–
1/8-27
SH3C
1/4-18
SH3C-E 3/8-18
–
1/4-18
–
3/8-18
–
1/2-14
–
3/8-18
–
1/2-14
–
3/4-14
–
1/2-14
–
3/4-14
–
1-11 1/2
Overall
Length
D
1.38
1.56
1.60
1.60
1.69
1.84
2.03
2.25
2.38
2.22
2.22
2.41
Dimensions (in.)
Exposed
Hex
Largest
Length*
Size Diameter
E
0.61
0.80
0.83
0.65
0.74
0.90
0.79
1.01
1.13
1.06
1.06
1.25
F
0.50
0.62
0.81
0.62
0.81
1.00
0.81
1.00
1.25
1.31
1.31
1.56
G
0.58
0.72
0.94
0.72
0.94
1.16
0.94
1.16
1.44
1.52
1.52
1.80
Wt. (LB.)
P/Piece
0.03
0.05
0.08
0.06
0.10
0.13
0.12
0.19
0.26
0.23
0.34
0.47
*This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 20 Series coupler.
Male Pipe Thread
D
E
G
F
Body
Size
(in.)
Part
No.
Brass
Part
No.
Steel
Part No.
Type 303
Stainless
Thread
Size
NPTF
Overall
Length
Dimensions (in.)
Exposed
Hex
Largest
Length*
Size Diameter
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
3/4
3/4
3/4
–
BH2C
–
–
–
BH2E
–
–
BH2F
–
–
BH2G
–
H0C
H2C
H2C-E
H00E
H0E
H2E
H2E-F
H0F
H2F
H2F-G
H2G-F
H2G
H2G-J
–
SH2C
SH2C-E
–
1/8-27
1/4-18
3/8-18
1/8-27
D
1.56
1.66
1.81
1.72
E
0.80
0.89
1.05
0.77
F
0.50
0.56
0.69
0.62
G
0.58
0.65
0.80
0.72
0.05
0.06
0.07
0.08
–
–
–
–
–
–
–
–
–
1/4-18
3/8-18
1/2-14
3/8-18
1/2-14
3/4-14
1/2-14
3/4-14
1-11 1/2
1.88
1.91
2.12
2.31
2.48
2.53
2.32
2.38
2.56
0.93
0.96
1.18
1.07
1.22
1.29
1.16
1.22
1.40
0.62
0.69
0.88
0.69
0.88
1.13
1.00
1.06
1.31
0.72
0.80
1.02
0.79
1.01
1.30
1.16
1.22
1.52
0.08
0.09
0.15
0.16
0.18
0.24
0.22
0.28
0.36
Wt. (LB.)
P/Piece
*This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 20 Series coupler.
A-6
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Standard Hose Barb
D
E
G
Body
Size
(in.)
Part
No.
Brass
Part
No.
Steel
Part No.
Type 303
Stainless
Hose
I.D.
1/4
1/4
1/4
1/4
3/8
3/8
1/2
1/2
1/2
3/4
3/4
3/4
–
–
–
–
–
–
–
–
–
–
BH5G
–
H8C
–
H8C-D
H9C
H5E
H6E
H4F
H5F
H5F-G
H5G-F
H5G
H5G-J
–
SH8C
–
SH9C
–
–
–
–
–
–
–
–
1/4
1/4
5/16
3/8
3/8
1/2
3/8
1/2
3/4
1/2
3/4
1
Dimension (in.)
Overall Exposed Largest
Length
Length* Diameter
D
1.72
2.09
2.09
2.09
1.85
2.19
2.53
2.53
3.06
2.47
3.00
3.24
E
0.95
1.33
1.33
1.33
.090
1.24
1.29
1.29
1.82
1.31
1.84
2.08
G
0.46
0.55
0.55
0.55
0.59
0.68
0.68
0.68
0.93
0.93
0.93
1.24
Wt. (LB.)
P/Piece
0.04
0.04
0.04
0.05
0.07
0.08
0.10
0.11
0.18
0.19
0.25
0.36
* This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 20 Series coupler.
Push-Lok Hose Barb**
D
E
G
Body
Size
(in.)
Part
No.
Brass
Part
No.
Steel
1/4
1/4
3/8
3/8
3/8
1/2
BH8CP
–
–
–
–
–
H8CP
H9CP
H4EP
H5EP
H6EP
H4FP
–
–
–
–
–
–
1/4
3/8
1/4
3/8
1/2
3/8
D
1.74
2.08
1.87
2.02
2.31
2.52
E
0.97
1.31
.092
1.07
1.37
1.27
G
.046
0.86
0.59
0.59
0.97
0.86
0.04
0.05
0.06
0.07
0.09
0.11
1/2
1/2
–
H5FP
H6FP
–
–
1/2
5/8
2.66
2.95
1.42
1.71
0.97
1.14
0.11
0.14
Hose
I.D.
Dimension (in.)
Overall Exposed Largest
Length
Length* Diameter
Wt. (LB.)
P/Piece
*This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 20 Series coupler.
**Push-Lok hose barbs are designed for use with Parker push-lok hose and do not require clamps.
A-7
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
Industrial Interchange Nipples
Pneumatic Quick Couplings
A Pneumatics
General Purpose – Manual Connect
Pneumatic Quick Couplings
10 Series, 20 Series, 50 Series, 70 Series
6
5
1
7
3
2
8
4
Component Part Features for Manual Couplers,
Series 10, 20, 50 & 70 Series
Accessories
- Coupler Options
Grip-Ring Sleeve - Features
1. Precision machining, hardened wear points* and solid
barstock construction provide long life even in rugged
applications.
2. Tubular valve with large flow passages delivers high air
flow with minimal pressure drop for efficient performance.
The tubular design provides 360° support for both the
valve seal and the mating nipple for long service life.
3. Precision molded seals form a “bubble tight” seal for
reliable operation within rated working pressures. Standard
seal material is Nitrile. Ethylene Propylene, Fluorocarbon
and Neoprene seals are available as options.
4. Proven ball locking mechanism with large numbers of
hardened steel or stainless steel locking balls evenly
distribute the load to resist wear and provide positive
connections. The ball locking mechanism also provides
accurate alignment and allows a swiveling action to reduce
hose torque.
5. Integral sleeve guard protects the sleeve and resists
accidental disconnects by allowing the coupling to ride
over obstructions without the sleeve being retracted.
6. Knurling and/or grooves on sleeve provide a gripping
surface for ease of operation.
• This Grip-Ring sleeve enables the
operator to connect or disconnect
the coupling easily, even with greasy
hands or while wearing heavy gloves.
• Grip-Ring sleeves are available for all 10 and 20 Series
couplers (only). To specify a model with a Grip-Ring
sleeve, add the suffix letter “R” to the regular model
number. Example: B13R.
Caution: The Grip-Ring sleeve is subject to unintended
disconnect if dragged on the end of a hose. Do not attempt
to pull it over obstacles.
Sleeve-Lok - Features
• All sizes of 10, 20, 30, 50,
and 70 Series couplers (only)
can be furnished with Locking
Sleeves, as illustrated.
• Place suffix letters -“SL” (Sleeve-Lok) after regular catalog
number. Example: B13-SL.
7. Wide range of body sizes, materials, options and end
terminations are available to meet specific needs.
Parker sleeve type couplings are available with male pipe
thread, female pipe thread, standard hose barb, Push-Lok
hose barb**, and reusable hose fitting ends. Standard
body materials are brass in 1/4" body size and steel in
larger sizes.
Coupler Repair Kits for 10, 20, 30, 50, 70, & TL Series
Body
Size
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
3/4
3/4
3/4
8. Parker sleeve type couplings are available in interchanges
for industrial interchange, Tru-flate, ARO 210 and Lincoln
long stem design nipples.
* Steel nipples only.
** Push-lok hose barbs are designed for use with Parker Push-lok hose and
do not require clamps.
A-8
Seal
Material
Nitrile
Ethylene Propylene
Fluorocarbon
Nitrile
Ethylene Propylene
Fluorocarbon
Nitrile
Ethylene Propylene
Fluorocarbon
Nitrile
Ethylene Propylene
Fluorocarbon
Part
No.
21K
21KW
21KY
14K
14KW
14KY
16K
16KW
16KY
38K
38KW
38KY
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
General Purpose – Manual Connect
Pneumatic Quick Couplings
10 Series
How to Order Information
The standard 1/4" 10 Series features a brass coupler with a
steel valve. Larger sizes include an all steel construction with
brass also available. To order a 3/8" or 1/2" coupler with a
brass body and steel sleeve, add the prefix “B” to the steel
part number, Example: B15.
Add the suffix “N” as well as the “B” prefix to order an all
brass coupler with stainless steel locking balls and springs,
Example: B15N.
All-brass couplings should be used to avoid corrosion from
moisture. Consult factory for specific recommendations.
Available with Sleeve-Lok (See Coupler Options). To order,
add the suffix “-SL” to the part number, Example: 15-SL.
Available for 1/4" 10 Series couplers is a Grip-Ring Sleeve
(See Coupler Options). To order add the suffix “R” to the part
number, Example: B13R.
Performance
Features
10 Series (1/4", 3/8", 1/2" sizes)
• Parker 10 Series couplings are the original Tru-Flate
design.
160
140
• This unique design has been field proven as a long lasting,
high performance coupling especially when used with
pneumatic tools.
Air Flow in SCFM
120
• Standard seals are Nitrile. See the Coupling Selection and
Ordering Information Guide at the beginning of Section A
and the Fluid Compatibility Chart at the end of this catalog
for optional materials.
Specifications
Body Size (in.)
Rated Pressure (PSI)
Temperature Range (Std. seals)*
Locking Device
Vacuum Data (inches Hg)
Disconnected (coupler only)
Connected
1/2"
100
80
60
3/8"
40
1/4
300
3/8
1/2
300
300
-40° to +250° F.
4 balls
8 balls
8 balls
20
1/4"
0
0
5
10
15
20
Pressure Drop in PSID
100 PSI Inlet Pressure
80 PSI Inlet Pressure
Not recommended
27.4
27.4
27.4
* See Coupling Selection and Ordering Guide for Optional Seals
See Coupling Repair Kits Table on introduction page to General
Purpose - Manual Connect Couplers.
Applications
Sleeve type couplings are widely used to connect air lines
and can also be used with low pressure fluids.
Their compact and economical design uses a ball locking
mechanism consisting of captive steel balls that engage the
locking groove on the mating nipple. The sliding spring loaded
sleeve on the coupler must be manually retracted in order to
connect or disconnect the nipple. It is easy to do, but two
hands are normally required.
Common applications include: compressed air, water, grease,
paint, limited vacuum and limited gases.
A-9
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
General Purpose – Manual Connect
Pneumatic Quick Couplings
10 Series
Couplers
Female Pipe Thread
A
C
B
Body
Size
(in.)
Part
No.
Brass
Part
No.
Steel
Thread
Size
NPTF
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
B13A
B13
B13E
–
B15
–
–
B17
–
–
–
–
15C
15
15F
17E
17
17G
1/8-27
1/4-18
3/8-18
1/4-18
3/8-18
1/2-14
3/8-18
1/2-14
3/4-14
Body
Size
(in.)
Part
No.
Brass
Part
No.
Steel
Thread
Size
NPTF
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
B12A
B12
B12E
–
B14
–
–
B16
–
–
–
–
14C
14
14F
16E
16
16G
1/8-27
1/4-18
3/8-18
1/4-18
3/8-18
1/2-14
3/8-18
1/2-14
3/4-14
Body
Size
(in.)
Part
No.
Brass
Part
No.
Steel
Hose
I.D.
1/4
1/4
1/4
3/8
3/8
1/2
1/2
1/2
B10-3B
B10-4B
B10-5B
–
–
–
–
–
–
–
–
14-5B
14-6B
16-5B
16-6B
16-7B
1/4
5/16
3/8
3/8
1/2
3/8
1/2
3/4
Body
Size
(in.)
Part
No.
Brass
Part
No.
Steel
Hose
I.D.
1/4
1/4
3/8
1/2
1/2
B10-3BP
B10-5BP
–
–
–
14-5BP
16-5BP
16-6BP
1/4
3/8
3/8
3/8
1/2
Dimensions (in.)
Overall
Hex
Largest
Length
Size
Diameter
A
1.83
1.83
1.95
2.22
2.28
2.55
2.74
2.96
3.19
B
0.75
0.75
0.81
0.88
0.88
1.00
1.00
1.00
1.25
C
0.90
0.90
0.94
1.06
1.06
1.16
1.19
1.19
1.44
Wt. (LB)
P/Piece
0.19
0.19
0.31
0.30
0.34
0.46
0.46
0.50
0.20
Male Pipe Thread
A
C
B
Dimensions (in.)
Overall
Hex
Largest
Length
Size
Diameter
A
1.89
2.05
2.08
2.36
2.39
2.55
2.93
3.08
3.21
B
0.75
0.75
0.75
0.88
0.88
0.88
1.00
1.00
1.13
C
0.90
0.90
0.90
1.06
1.06
1.06
1.19
1.19
1.30
Wt. (LB)
P/Piece
0.17
0.18
0.19
0.26
0.27
0.28
0.42
0.45
0.50
Standard Hose Barb
A
C
B
Dimensions (in.)
Overall
Hex
Largest
Length
Size
Diameter
A
B
C
2.49
2.49
2.49
2.86
3.08
3.37
3.62
3.96
0.75
0.75
0.75
0.88
0.88
1.00
1.00
1.00
0.90
0.90
0.90
1.06
1.06
1.19
1.19
1.19
Wt. (LB)
P/Piece
0.18
–
0.18
0.26
0.27
0.41
0.43
0.48
Push-Lok Hose Barb*
A
C
B
Dimensions (in.)
Overall
Hex
Largest
Length
Size
Diameter
A
2.32
2.47
2.88
3.35
3.46
B
0.75
0.75
0.88
1.00
1.00
C
0.90
0.90
1.06
1.19
1.19
Wt. (LB)
P/Piece
0.19
0.19
0.26
0.40
0.43
* Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps.
A-10
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
General Purpose – Manual Connect
Pneumatic Quick Couplings
10 Series
Nipples
Female Pipe Thread
D
E
G
F
Body
Size
(in.)
Part
No.
Brass
Part
No.
Steel
Thread
Size
NPTF
Overall
Length
1/4
1/4
1/4
3/8
3/8
1/2
1/2
1/2
–
B3C
–
–
–
–
–
–
1C
3C
3C-E
1E
3E
1F
3F
H3F-G
1/8-27
1/4-18
3/8-18
1/4-18
3/8-18
3/8-18
1/2-14
3/4-14
D
1.28
1.47
1.50
1.60
1.68
2.05
2.27
2.38
Dimensions (in.)
Exposed
Hex
Length*
Size
E
0.55
0.74
0.77
0.67
0.77
0.83
1.05
1.13
Largest
Diameter
Wt. (LB)
P/Piece
G
0.58
0.72
0.94
0.72
0.94
0.94
1.16
1.44
0.05
0.05
0.07
0.07
0.10
0.13
0.18
0.26
F
0.50
0.62
0.81
0.62
0.81
0.81
1.00
1.25
* This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 10 Series coupler.
Male Pipe Thread
D
E
G
F
Body
Size
(in.)
Part
No.
Brass
Part
No.
Steel
Part No.
Type 303
Stainless
Thread
Size
NPTF
Overall
Length
1/4
1/4
1/4
3/8
3/8
1/2
1/2
1/2
–
B2C
–
–
–
–
–
–
0C
2C
2C-E
0E
2E
0F
2F
H2F-G
–
S2C
–
–
–
–
–
–
1/8-27
1/4-18
3/8-18
1/4-18
3/8-18
3/8-18
1/2-14
3/4-14
D
1.47
1.62
1.72
1.88
1.90
2.33
2.48
2.53
Dimensions (in.)
Exposed
Hex
Length*
Size
E
0.74
0.89
0.99
0.95
0.98
1.12
1.27
1.29
Largest
Diameter
Wt. (LB)
P/Piece
G
0.58
0.65
0.80
0.72
0.80
0.79
1.01
1.30
0.04
0.06
0.05
0.08
0.09
0.13
0.17
0.24
F
0.50
0.56
0.69
0.62
0.69
0.69
0.88
1.13
* This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 10 Series coupler.
Standard Hose Barb
D
E
G
Body
Size
(in.)
Part
No.
Steel
Hose
I.D.
Overall
Length
Dimensions (in.)
Exposed
Largest
Length*
Diameter
1/4
1/4
3/8
1/2
1/2
1/2
8C
9C
5E
H4F
1/4
3/8
3/8
3/8
D
1.63
2.00
1.81
2.53
E
.090
1.27
0.89
1.29
G
0.45
0.55
0.59
0.69
0.04
0.05
0.07
0.08
5F
H5F-G
1/2
3/4
2.81
3.16
1.60
1.91
0.81
0.94
0.11
0.18
Wt. (LB)
P/Piece
* This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 10 Series coupler.
Push-Lok Hose Barb**
D
E
G
Body
Size
(in.)
Part
No.
Steel
Hose
I.D.
Overall
Length
1/4
1/4
3/8
1/2
1/2
8CP
9CP
5EP
H4FP
H5FP
1/4
3/8
3/8
3/8
1/2
D
1.66
1.98
1.98
2.52
2.66
Dimensions (in.)
Exposed
Largest
Length*
Diameter
E
0.93
1.25
1.06
1.27
1.42
G
0.45
0.86
0.59
0.86
0.97
Wt. (LB)
P/Piece
0.04
0.05
0.08
0.11
0.11
* This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 10 Series coupler.
** Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps.
A-11
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
20 Series Industrial Interchange
How to Order Information
The standard 1/4" 20 Series is a brass coupler with a steel
valve. The larger sizes are an all steel construction with brass
available as an option. To order a 3/8" or 1/2" body size
coupler with a brass body and a steel sleeve and valve, add
the prefix “B” to the steel part number. Example: B16.
Add the suffix “N” as well as the “B” prefix to order an all
brass coupler with stainless steel locking balls and springs,
Example: B25N. All-brass couplings should be used to avoid
corrosion from moisture. Consult factory for specific
recommendations.
Available with Sleeve-Lok (See Coupler Options at the
beginning of Section A). To order, add “-SL” as a suffix to the
part number, Example: 25-SL.
Available for 1/4" 20 Series couplers is a Grip-Ring sleeve
(See Coupler Options). To order, add the suffix “R” to the part
number, Example: B23R.
Features
Applications
• Parker 20 Series sleeve type couplers accept industrial
interchange nipples manufactured by Parker and other
manufacturers.
Sleeve type couplings are widely used to connect air lines
and can also be used with low pressure fluids.
• Standard seals are Nitrile. See the Coupling Selection and
Ordering Information Guide at the beginning of Section A
and the Fluid Compatibility Chart at the end of this catalog
for optional materials.
Common applications include: compressed air, water, grease,
paint, limited vacuum and limited gases.
Specifications
Body Size (in.)
Rated Pressure (psi)
Temperature Range (Std. seals)*
Locking Device
Vacuum Data (inches Hg)
Disconnected (coupler only)
Connected
Their compact and economical design uses a ball locking
mechanism consisting of captive steel balls that engage the
locking groove on the mating nipple. The sliding spring loaded
sleeve on the coupler must be manually retracted in order to
connect or disconnect the nipple. It is easy to do, but two
hands are normally required.
1/4
300
3/8
1/2
300
300
-40° to +250° F.
4 balls
8 balls
8 balls
Performance
20 Series (1/4", 3/8", 1/2" sizes)
160
Not recommended
27.4
27.4
27.4
140
1/2"
120
* See Coupling Selection and Ordering Guide for Optional Seals
See Coupling Repair Kits Table on introduction page to General
Purpose - Manual Connect Couplers
Air Flow in SCFM
A Pneumatics
General Purpose – Manual Connect
Pneumatic Quick Couplings
100
80
60
3/8"
40
1/4"
20
0
0
5
10
15
20
Pressure Drop in PSID
100 PSI Inlet Pressure
80 PSI Inlet Pressure
A-12
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
20 Series Industrial Interchange
Couplers
Female Pipe Thread
A
C
B
Body
Size
(in.)
Part
No.
Brass
Part
No.
Steel
Part No.
Type 303
Stainless
Thread
Size
NPTF
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
B23A
B23
B23E
–
B25
–
–
B17
–
–
–
–
25C
25
25F
17E
17
17G
–
S23
–
–
–
–
–
–
–
1/8-27
1/4-18
3/8-18
1/4-18
3/8-18
1/2-14
3/8-18
1/2-14
3/4-14
Body
Size
(in.)
Part
No.
Brass
Part
No.
Steel
Part No.
Type 303
Stainless
Thread
Size
NPTF
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
B22A
B22
B22E
–
B24
–
–
B16
–
–
–
–
24C
24
24F
16E
16
16G
–
S22
–
–
–
–
–
–
–
1/8-27
1/4-18
3/8-18
1/4-18
3/8-18
1/2-14
3/8-18
1/2-14
3/4-14
Dimension (in.)
Overall
Hex
Largest
Length
Size
Diameter
A
1.83
1.83
1.95
2.22
2.28
2.55
2.74
2.96
3.19
B
0.75
0.75
0.81
0.88
0.88
1.00
1.00
1.00
1.25
C
0.90
0.90
0.94
1.06
1.06
1.16
1.19
1.19
1.44
Wt. (LB)
P/Piece
0.20
0.19
0.20
0.30
0.32
0.34
0.46
0.50
0.56
Male Pipe Thread
A
C
B
Dimension (in.)
Overall
Hex
Largest
Length
Size
Diameter
A
1.89
2.05
2.08
2.36
2.39
2.55
2.93
3.08
3.21
B
0.75
0.75
0.75
0.88
0.88
0.88
1.00
1.00
1.13
C
0.90
0.90
0.90
1.06
1.06
1.06
1.19
1.19
1.30
Wt. (LB)
P/Piece
0.18
0.18
0.19
0.26
0.29
0.29
0.42
0.47
0.50
Standard Hose Barb
A
C
B
Body
Size
(in.)
Part
No.
Brass
Part
No.
Steel
Hose
I.D.
1/4
1/4
1/4
3/8
3/8
1/2
1/2
1/2
B20-3B
B20-4B
B20-5B
–
–
–
–
–
–
–
–
24-5B
24-6B
16-5B
16-6B
16-7B
1/4
5/16
3/8
3/8
1/2
3/8
1/2
3/4
Body
Size
(in.)
Part
No.
Brass
Part
No.
Steel
Hose
I.D.
1/4
1/4
3/8
1/2
1/2
B20-3BP
B20-5BP
–
–
–
–
–
24-5BP
16-5BP
16-6BP
1/4
3/8
3/8
3/8
1/2
Dimensions (in.)
Overall
Hex
Largest
Length
Size
Diameter
A
2.49
2.49
2.49
2.86
3.08
3.37
3.62
3.96
B
0.75
0.75
0.75
0.88
0.88
1.00
1.00
1.00
C
0.90
0.90
0.90
1.06
1.06
1.19
1.19
1.19
Wt. (LB)
P/Piece
0.18
0.18
0.18
0.27
0.28
0.41
0.43
0.48
Push-Lok Hose Barb*
A
C
Dimensions (in.)
Overall
Hex
Largest
Length
Size
Diameter
A
2.32
2.47
2.88
3.35
3.46
B
0.75
0.75
0.88
1.00
1.00
C
0.90
0.90
1.06
1.19
1.19
Wt. (LB)
P/Piece
0.18
0.19
0.27
0.40
0.43
* Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps.
B
Note: See Table of Contents for those nipples used with 20 Series couplers.
A-13
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
General Purpose – Manual Connect
Pneumatic Quick Couplings
50 Series
Specifications
Body Size (in.)
1/4
Rated Pressure (PSI)
300
Temperature Range (Std. seals)*
-40° to +250° F.
Locking Device
4 balls
* See Coupling Selection and Ordering Guide for Optional Seals.
See Coupling Repair Kits Table on introduction page to General
Purpose - Manual Connect Couplers
Performance
50 Series (1/4" size)
35
30
Features
25
• Parker 50 Series couplings are interchangeable with ARO’s
210 series couplings.
Air Flow in SCFM
A Pneumatics
General Purpose – Manual Connect
Pneumatic Quick Couplings
• 50 Series couplings have a full opening tubular valve for
maximum flow and a built-in sleeve guard to minimize
accidental disconnect.
• 50 Series couplings have all brass bodies and steel valves.
1/4"
20
15
10
• Standard seal material is Nitrile. See the Coupling Selection
and Ordering Information guide at the beginning of Section
A and the Fluid Compatibility Chart at the end of this
catalog for optional materials.
5
0
• Push-to-Connect version available. See HA Series.
0
5
10
15
20
Pressure Drop in PSID
100 PSI Inlet Pressure
80 PSI Inlet Pressure
Couplers
Female Pipe Thread
A
C
B
Male Pipe Thread
A
C
Body
Size
(in.)
Part
No.
Brass
Thread
Size
NPTF
1/4
1/4
B53
B53E
1/4-18
3/8-18
Body
Size
(in.)
Part
No.
Brass
Thread
Size
NPTF
1/4
1/4
B52
B52E
1/4-18
3/8-18
Body
Size
(in.)
Part
No.
Brass
Hose
I.D.
1/4
1/4
B50-3BP
B50-5BP
1/4
3/8
Dimensions (in.)
Overall
Hex
Largest Wt. (LB)
Length
Size
Diameter P/Piece
A
1.83
1.95
B
0.75
0.81
C
0.90
0.94
0.20
0.21
Dimensions (in.)
Overall
Hex
Largest Wt. (LB)
Length
Size
Diameter P/Piece
A
2.05
2.08
B
0.75
0.75
C
0.90
0.90
0.20
0.21
B
Push-Lok Hose Barb*
A
C
B
Dimensions (in.)
Overall
Hex
Largest Wt. (LB)
Length
Size
Diameter P/Piece
A
2.32
2.47
B
0.75
0.75
C
0.90
0.90
0.19
0.20
* Push-Lok hose barbs are designed for use with Push-Lok hose and do not require clamps.
A-14
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
General Purpose – Manual Connect
Pneumatic Quick Couplings
50 Series
Nipples
Female Pipe Thread
D
E
Body
Size
(in.)
Part
No.
Steel
Thread
Size
NPTF
Overall
Length
1/4
A3C
1/4-18
D
1.47
G
Dimensions (in.)
Exposed
Hex
Length*
Size
E
0.66
F
0.62
Largest
Diameter
Wt. (LB)
P/Piece
G
0.72
0.04
* This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker
50 Series coupler.
F
Male Pipe Thread
D
E
Body
Size
(in.)
Part
No.
Steel
Thread
Size
NPTF
Overall
Length
1/4
A2C
1/4-18
D
1.62
G
Dimensions (in.)
Exposed
Hex
Length*
Size
E
0.82
F
0.56
Largest
Diameter
Wt. (LB)
P/Piece
G
0.65
0.05
* This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker
50 Series coupler.
F
Standard Hose Barb
D
E
Body
Size
(in.)
Part
No.
Steel
Hose
I.D.
Overall
Length
1/4
A8C
1/4
D
1.63
G
Dimensions (in.)
Exposed Largest
Length* Diameter
E
0.85
G
.043
Wt. (LB)
P/Piece
0.03
* This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker
50 Series coupler.
Push-Lok Hose Barb**
D
E
Body
Size
(in.)
Part
No.
Steel
Hose
I.D.
Overall
Length
1/4
A8CP
1/4
D
1.65
G
Dimensions (in.)
Exposed Largest
Length* Diameter
E
0.87
G
0.43
Wt. (LB)
P/Piece
0.03
* This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker
50 Series coupler.
** Push-Lok hose barbs are designed for use with Parker push-lok hose and do not require
clamps.
A-15
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
70 Series
Specifications
Body Size (in.)
1/4
Rated Pressure (psi)
300
Temperature Range (Std. seals)*
-40° to +250° F.
Locking Device
4 balls
* See Coupling Selection and Ordering Guide for Optional Seals.
See Coupling Repair Kits Table on introduction page to General
Purpose - Manual Connect Couplers
Performance
70 Series (1/4" size)
35
30
25
Features
Air Flow in SCFM
A Pneumatics
General Purpose – Manual Connect
Pneumatic Quick Couplings
• Parker 70 Series couplings are interchangeable with
Lincoln’s “Long Stem” series couplings.
• 70 Series couplings have a full opening tubular valve for
maximum flow and a built-in sleeve guard to minimize
accidental disconnect.
1/4"
20
15
10
• The 70 Series is only available in 1/4" body size.
• 70 Series couplings have all brass bodies and steel valves.
5
• Standard seal material is Nitrile. See the Coupling Selection
and Ordering Information Guide at the beginning of Section
A and the Fluid Compatibility Chart at the end of this
catalog for optional materials.
0
0
5
10
15
20
Pressure Drop in PSID
100 PSI Inlet Pressure
80 PSI Inlet Pressure
Couplers
Female Pipe Thread
A
Body
Size
(in.)
Part
No.
Brass
Thread
Size
NPTF
Overall
Length
1/4
B73
1/4-18
A
2.40
Body
Size
(in.)
Part
No.
Brass
Thread
Size
NPTF
Overall
Length
1/4
B72
1/4-18
A
2.62
C
Dimensions (in.)
Hex
Largest
Size
Diameter
B
0.75
C
0.90
Wt. (LB)
P/Piece
0.25
B
Male Pipe Thread
A
C
B
Dimensions (in.)
Hex
Largest
Size
Diameter
B
0.75
C
0.90
Wt. (LB)
P/Piece
0.25
Nipples
Female Pipe Thread
D
E
Body
Size
(in.)
Part
No.
Steel
Thread
Size
NPTF
Overall
Length
1/4
L3C
1/4-18
D
2.10
Body
Size
(in.)
Part
No.
Steel
Thread
Size
NPTF
Overall
Length
1/4
L2C
1/4-18
D
2.25
G
Dimensions (in.)
Exposed
Hex
Length*
Size
E
0.77
F
0.62
Largest
Diameter
Wt. (LB)
P/Piece
G
0.72
0.05
Largest
Diameter
Wt. (LB)
P/Piece
G
0.65
0.06
F
Male Pipe Thread
D
E
G
F
Dimensions (in.)
Exposed
Hex
Length*
Size
E
0.92
F
0.56
* This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 70 Series coupler.
A-16
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
RF, HF, HA, UC Series
3
4
7
1
2
6
5
8
Component Part Features
1. Precision machining, hardened wear points* and solid bar
stock construction provide long life even in rugged
applications.
5. Integral sleeve guard protects the sleeve and resists
accidental disconnects by allowing the coupling to ride over
obstructions without the sleeve being retracted.
2. Tubular valve with large flow passages delivers high flow
with minimum pressure drop for efficient performance. The
tubular design provides 360° support for both the valve
seal and the mating nipple for long service life.
6. Knurling on the sleeve provides a gripping surface for ease
of operation.
3. Precision molded seals form a “bubble tight” seal for
reliable operation within rated working pressures. Standard
seal material is Nitrile. Ethylene Propylene, Fluorocarbon
and Neoprene are available as options. See the Coupling
Selection and Ordering Guide in the front of the Pneumatic
Section of the catalog.
4. Proven ball locking mechanism with large numbers of
hardened steel or stainless steel locking balls evenly
distribute the load to resist wear and provide positive
connections. The ball locking mechanism also provides
accurate alignment and allows a swiveling action to reduce
hose torque.
7. Wide range of end configurations are available to meet
specific needs. Parker push-to-connect type couplings are
available with male pipe thread, female pipe thread,
standard hose barb, and Push-Lok hose barb**.
8. Parker 20, 30, HF, and E-z-mate Series couplings mate
with industrial interchange design nipples. See Table of
Contents for additional specifications.
9. Push-to-connect design permits one-handed connection
when the coupler half is rigidly mounted.
* steel nipples only
** Push-Lok hose barbs are designed for use with Parker Push-Lok hose and
do not require clamps.
A-17
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
General Purpose – Push-To-Connect
Pneumatic Quick Couplings
RF Series
Description
The Parker RF Series pneumatic couplings offer the quality
and dependability customers have come to expect from
Parker’s line of pneumatic quick couplings. The RF Series
has been designed to increase the flow through and reduce
the pressure drop over the coupling. The nipple design has
up to 2-1/2 times larger flow area than standard industrial
interchange nipples. This, along with a specially designed
coupler valve, allows tremendous flow through a coupling
with an envelope size of current couplings in the market
today. The benefits to the end user are increased tool
efficiency and decreased air costs.
Performance
RF Series (1/4" & 3/8" body size)
with 1/4" & 3/8" Female NPSF
160
140
• Aerodynamic valve design.
• Flow area of the RF nipple is up to 2-1/2 times larger than
industrial interchange nipples.
• Flow rates on 1/4” greater than many 3/8" body size couplers.
3/8" Body Size
3/8" Female NPSF
Features
120
Air Flow in SCFM
A Pneumatics
General Purpose – Push-To-Connect
Pneumatic Quick Couplings
1/4" Body Size
100
3/8" Female NPSF
80
60
• Flow rates on 3/8” greater than many 1/2" body size couplers.
40
• Coupler sleeves are nickel-plated steel and coupler bodies
are solid brass construction for excellent corrosion
resistance. Standard RF nipples are manufactured from solid
steel bar stock, case hardened and plated with yellow zinc
chromate for superior service life.
1/4" Body Size
1/4" Female NPSF
20
0
0
5
• Dependable ball locking mechanism allows a swiveling
action to reduce hose torque.
10
20
100 PSI Inlet Pressure
80 PSI Inlet Pressure
• Push-To-Connect design for easy one hand connection.
• Integral sleeve guard to protect against accidental
disconnection.
15
Pressure Drop in PSID
How To Order
• Wide range of port options available.
RF - 251 - 4 FP - *
• More efficient use of compressed air due to higher flows
and reduced pressure drop.
Seal Options
Blank - Nitrile
F - Fluorocarbon
E - Ethylene Propylene
• 1/4” body size interchanges with Rectus 25 and Cejn 320 series.
• 3/8” body size interchanges with Rectus 27 and Cejn 410 series.
Port Configuration
Specifications
FP - Female Pipe
MP - Male Pipe
HB - Standard Hose Barb
PL - Push-Lok Hose Barb
Body Size (in.)
1/4
3/8
Rated Pressure (psi)
300
300
Temperature Range (std seals) -40° to +250°F
-40° to +250°F
Locking Device
4 balls
8 balls
Vacuum Data (inches Hg)
Disconnected (coupler only) Not Recommended Not Recommended
Connected
Not Recommended Not Recommended
Port Size (1/16 of an inch)
Unit
1 - Valved Coupler
4 - Unvalved Nipple
Body Size
25 - 1/4"
37 - 3/8"
RF Series
A-18
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
General Purpose – Push-To-Connect
Pneumatic Quick Couplings
RF Series
Couplers
Female Pipe Thread
A
C
B
Body
Size
(in.)
NEW
Part
No.
OLD
Part
No.
Thread
Size
NPSF
1/4
1/4
3/8
3/8
RF-251-4FP
RF-251-6FP
RF-371-6FP
RF-371-8FP
CRF02-4-4
CRF02-4-6
–
–
1/4-18
3/8-18
3/8-18
1/2-14
Dimensions (in.)
Overall
Hex
Largest Wt. (LB)
Length
Size
Diameter P/Piece
A
2.19
2.34
2.33
2.49
B
0.81
0.81
0.94
1.00
C
0.99
0.99
1.07
1.07
0.26
0.27
0.31
0.35
Male Pipe Thread
Body
Size
(in.)
A
NEW
Part
No.
OLD
Part
No.
Thread
Size
NPTF
C
1/4
1/4
1/4
3/8
3/8
B
RF-251-4MP CRF01-4-4
RF-251-6MP CRF01-4-6
RF-251-8MP CRF01-4-8
RF-371-6MP
–
RF-371-8MP
–
1/4-18
3/8-18
1/2-14
3/8-18
1/2-14
Dimensions (in.)
Overall
Hex
Largest Wt. (LB)
Length
Size
Diameter P/Piece
A
2.34
2.37
2.56
2.52
2.68
B
0.81
0.81
0.88
0.94
0.94
C
0.99
0.99
0.99
1.07
1.07
0.24
0.25
0.29
0.30
0.33
Standard Hose Barb
Body
Size
(in.)
A
NEW
Part
No.
OLD
Part
No.
Hose
I.D.
1/4
1/4
3/8
RF-251-4HB CRFHB-4-4
RF-251-6HB CRFHB-4-6
RF-371-6HB
–
1/4
3/8
3/8
A
2.81
2.81
3.02
B
0.81
0.81
0.94
C
0.99
0.99
1.07
0.26
0.27
0.31
3/8
RF-371-8HB
1/2
3.02
0.94
1.07
0.34
Body
Size
(in.)
NEW
Part
No.
C
B
Dimensions (in.)
Overall
Hex
Largest Wt. (LB)
Length
Size
Diameter P/Piece
–
Push-Lok Hose Barb
A
C
B
1/4
1/4
1/4
3/8
3/8
OLD
Part
No.
RF-251-4PL CRFPL-4-4
RF-251-6PL CRFPL-4-6
RF-251-8PL CRFPL-4-8
RF-371-6PL
–
RF-371-8PL
–
A-19
Hose
I.D.
1/4
3/8
1/2
3/8
1/2
Dimensions (in.)
Overall
Hex
Largest Wt. (LB)
Length
Size
Diameter P/Piece
A
2.64
2.78
2.93
3.02
3.02
B
0.81
0.81
0.81
0.94
0.94
C
0.99
0.99
0.99
1.07
1.07
0.26
0.27
0.28
0.33
0.33
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
General Purpose – Push-To-Connect
Pneumatic Quick Couplings
RF Series
Nipples
Female Pipe Thread
Body
Size
(in.)
NEW
Part
No.
1/4
1/4
3/8
3/8
OLD
Part
No.
Thread
Dimensions (in.)
Size Overall Exposed* Hex Largest Wt. (LB)
NPTF Length Length Size Diameter P/Piece
RF-254-4FP NRF02-4-4-S 1/4-18
RF-254-6FP NRF02-4-6-S 3/8-18
RF-374-6FP
–
3/8-18
RF-374-8FP
–
1/2-14
D
1.45
1.50
1.53
1.62
E
0.68
0.73
0.78
0.87
F
0.62
0.81
0.81
1.00
G
0.72
0.94
0.94
1.16
0.06
0.09
0.10
0.13
Male Pipe Thread
Body
Size
(in.)
1/4
1/4
3/8
3/8
NEW
Part
No.
OLD
Part
No.
Thread
Dimensions (in.)
Size Overall Exposed* Hex Largest Wt. (LB)
NPTF Length Length Size Diameter P/Piece
RF-254-4MP NRF01-4-4-S 1/4-18
RF-254-6MP NRF01-4-6-S 3/8-18
RF-374-6MP
–
3/8-18
RF-374-8MP
–
1/2-14
D
1.60
1.67
1.70
1.85
E
0.83
0.90
0.95
1.10
F
0.56
0.69
0.69
0.88
G
0.65
0.75
0.75
1.01
0.05
0.08
0.09
0.15
Standard Hose Barb
Body
Size
(in.)
NEW
Part
No.
OLD
Part
No.
Hose
I.D.
Dimensions (in.)
Overall Exposed* Largest Wt. (LB)
Length Length Diameter P/Piece
1/4
1/4
RF-254-4HB
RF-254-6HB
NRFHB-4-4-S
NRFHB-4-6-S
1/4
3/8
D
1.66
1.66
E
0.89
0.89
G
0.50
0.50
0.04
0.05
3/8
3/8
RF-374-6HB
RF-374-8HB
–
–
3/8
1/2
1.63
1.97
0.88
1.22
0.59
0.68
0.07
0.08
Body
Size
(in.)
NEW
Part
No.
OLD
Part
No.
1/4
1/4
3/8
3/8
RF-254-4PL
RF-254-6PL
RF-374-6PL
RF-374-8PL
NRFPL-4-4-S
NRFPL-4-6-S
–
–
Push-Lok Hose Barb
Dimensions (in.)
Hose Overall Exposed* Largest Wt. (LB)
I.D. Length Length Diameter P/Piece
1/4
3/8
3/8
1/2
D
1.69
1.83
1.80
2.09
E
0.92
1.06
1.05
1.34
G
0.50
0.50
0.59
0.897
0.04
0.05
0.07
0.09
* This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker
RF Series coupler.
A-20
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
HF Series Industrial Interchange
Specifications
Body Size (in.)
1/8
1/4
3/8
1/2
Rated Pressure (psi)
250
300
300
300
Temperature Range (Std. seals)
-40° to +250°F
Locking Device
5 balls
4 balls
6 balls 8 balls
Vacuum Data (inches Hg)
Disconnected (coupler only)
Not Recommended
Connected
—
27.4
27.4
27.4
Performance
HF Series (1/8" & 1/4" sizes)
40
35
30
Features
Air Flow in SCFM
1/4"
• Parker HF Series Pneumatic Quick Couplings offer an
alternative to traditional industrial interchange couplers. The
quality and durability you have come to expect from Parker
20 Series couplers, combined with a slim profile and pushto-connect design. The result is an easy to use general
purpose pneumatic coupler suitable for use in a variety of
applications.
25
20
15
1/8"
• Parker HF couplers feature sleeve guards** to protect
against accidental disconnection.
10
• Standard couplers feature solid brass construction, high
flow valving, corrosion resistant valves, and stainless steel
locking balls and valve spring.
5
0
• Heavy Duty Couplers* featuring heat treated, solid steel
bodies and sleeves for added strength and durability.
0
5
10
*** 1/8" couplings have no standard industry interface.
** 1/8" couplings do not incorporate an integral sleeve guard.
* 1/8” and 1/2” are unavailable in the Heavy Duty version.
HF Series (3/8" & 1/2" sizes)
220
200
How To Order
180
HF - 251 - 4 FP - * - S
160
Heavy Duty Steel Coupler
Blank - Nitrile
F - Fluorocarbon
E - Ethylene Propylene
Port Configuration
FP - Female Pipe
MP - Male Pipe
HB - Standard Hose Barb
PL - Push-Lok Hose Barb
1/2"
Air Flow in SCFM
Seal Options
140
120
100
3/8"
80
60
Port Size (1/16 of an inch)
40
Unit
1 - Valved Coupler
4 - Unvalved Nipple
20
Body Size
-
20
100 PSI Inlet Pressure
80 PSI Inlet Pressure
• Parker HF couplers accept Industrial Interchange nipples***
manufactured by Parker and other manufacturers. See table
of contents.
12
25
37
50
15
Pressure Drop in PSID
0
1/8"
1/4"
3/8"
1/2"
0
5
10
15
20
Pressure Drop in PSID
100 PSI Inlet Pressure
80 PSI Inlet Pressure
HF Series
A-21
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
General Purpose – Push-To-Connect
Pneumatic Quick Couplings
A Pneumatics
General Purpose – Push-To-Connect
Pneumatic Quick Couplings
HF Series Industrial Interchange
1/8" Body Size Couplers
Female Pipe Thread
Body
Size
(in.)
A
New
Part No.
Brass
1/8 HF-121-2FP
1/8 HF-121-4FP
C
Old
Part No.
Brass
Thread
Size
NPTF
HF302F-2
HF302F-4
1/8-27
1/4-18
Dimensions (in.)
Overall
Hex
Largest Wt. (LB)
Length
Size
Diameter P/Piece
A
1.42
1.81
B
0.55
0.67
C
0.63
0.63
0.06
0.10
B
Male Pipe Thread
A
Body
Size
(in.)
New
Part No.
Brass
Old
Part No.
Brass
Thread
Size
NPTF
1/8
1/8
HF-121-2MP
HF-121-4MP
HF302M-2
HF302M-4
1/8-27
1/4-18
C
Dimensions (in.)
Overall
Hex
Largest Wt. (LB)
Length
Size
Diameter P/Piece
A
1.50
1.61
B
0.55
0.55
C
0.63
0.63
0.06
0.07
B
1/8" Body Size Nipples
Body
Size
(in.)
Female Pipe Thread
D
New
Part No.
Brass
Old
Part No.
Brass
Thread
Dimensions (in.)
Size
Overall Exposed Hex Largest Wt. (LB)
NPTF Length Length* Size Diameter P/Piece
E
G
1/8
1/8
HF-124-2FP HF702F-2 1/8-27
HF-124-4FP HF702F-4 1/4-18
D
1.08
1.34
E
0.55
0.81
F
0.50
0.67
G
0.58
0.78
0.03
0.07
* This dimension represents the portion that is exposed when nipple is inserted in a Parker HF
series coupler.
F
Male Pipe Thread
D
Body
Size
(in.)
E
G
F
1/8
1/8
New
Part No.
Brass
Old
Part No.
Brass
Thread
Dimensions (in.)
Size
Overall Exposed Hex Largest Wt. (LB)
NPTF Length Length* Size Diameter P/Piece
HF-124-2MP HF702M-2 1/8-27
HF-124-4MP HF702M-4 1/4-18
D
1.06
1.25
E
0.53
0.72
F
0.44
0.56
G
0.51
0.63
0.03
0.05
* This dimension represents the portion that is exposed when nipple is inserted in a Parker HF
series coupler.
A-22
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
HF Series Industrial Interchange
1/4" and 3/8" Body Size Couplers
Female Pipe Thread
A
Body
Size
(in.)
New
Part No.
Brass
Old
Part No.
Brass
Thread
Size
NPSF
1/4
1/4
3/8
3/8
3/8
1/2
HF-251-4FP
HF-251-6FP
HF-371-4FP
HF-371-6FP
HF-371-8FP
HF-501-8FP
HF304F-4
HF304F-6
HF306F-4
HF306F-6
HF306F-8
–
1/4-18
3/8-18
1/4-18
3/8-18
1/2-14
1/2-14
Body
Size
(in.)
New
Part No.
Brass
Old
Part No.
Brass
Thread
Size
NPTF
1/4
1/4
3/8
3/8
3/8
1/2
HF-251-4MP
HF-251-6MP
HF-371-4MP
HF-371-6MP
HF-371-8MP
HF-501-8MP
HF304M-4
HF304M-6
HF306M-4
HF306M-6
HF306M-8
–
1/4-18
3/8-18
1/4-18
3/8-18
1/2-14
1/2-14
C
B
Dimensions (in.)
Overall
Hex
Largest Wt. (LB)
Length
Size Diameter P/Piece
A
2.19
2.34
2.33
2.33
2.49
3.35
B
0.81
0.81
0.94
0.94
1.00
1.06
C
0.99
0.99
1.07
1.07
1.07
1.19
0.26
0.27
0.33
0.31
0.35
0.60
Male Pipe Thread
A
C
B
Dimensions (in.)
Overall
Hex
Largest Wt. (LB)
Length
Size Diameter P/Piece
A
2.34
2.37
2.49
2.52
2.68
3.48
B
0.81
0.81
0.94
0.94
0.94
1.06
C
0.99
0.99
1.07
1.07
1.07
1.19
0.25
0.26
0.32
0.30
0.33
0.57
Standard Hose Barb
A
C
B
Body
Size
(in.)
New
Part No.
Brass
Old
Part No.
Brass
Hose
I.D.
1/4
1/4
3/8
3/8
HF-251-4HB
HF-251-6HB
HF-371-6HB
HF-371-8HB
HF304HB-4
HF304HB-6
HF306HB-6
HF306HB-8
1/4
3/8
3/8
1/2
Body
Size
(in.)
New
Part No.
Brass
Old
Part No.
Brass
1/4
1/4
3/8
3/8
HF-251-4PL
HF-251-6PL
HF-371-6PL
HF-371-8PL
HF304PL-4
HF304PL-6
HF306PL-6
HF306PL-8
Dimensions (in.)
Overall
Hex
Largest Wt. (LB)
Length
Size Diameter P/Piece
A
2.81
2.81
3.02
3.02
B
0.81
0.81
0.94
0.94
C
0.99
0.99
1.07
1.07
0.26
0.27
0.31
0.34
Push-Lok Hose Barb
A
C
B
A-23
Dimensions (in.)
Hose Overall
Hex
Largest Wt. (LB)
I.D. Length
Size Diameter P/Piece
1/4
3/8
3/8
1/2
A
2.64
2.78
3.02
3.07
B
C
0.81
0.81
0.94
0.94
0.99
0.99
1.07
1.07
0.26
0.27
0.33
0.31
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
General Purpose – Push-To-Connect
Pneumatic Quick Couplings
A Pneumatics
General Purpose – Push-To-Connect
Pneumatic Quick Couplings
HF Series Industrial Interchange
Heavy Duty Couplers
Female Pipe Thread
A
Body
Size
(in.)
New
Part No.
Steel
Old
Part No.
Steel
Thread
Size
NPSF
1/4
1/4
3/8
3/8
3/8
HF-251-4FP-S
HF-251-6FP-S
HF-371-4FP-S
HF-371-6FP-S
HF-371-8FP-S
HF404F-4
HF404F-6
HF406F-4
HF406F-6
HF406F-8
1/4-18
3/8-18
1/4-18
3/8-18
1/2-14
Body
Size
(in.)
New
Part No.
Steel
Old
Part No.
Steel
Thread
Size
NPTF
1/4
1/4
3/8
3/8
3/8
HF-251-4MP-S
HF-251-6MP-S
HF-371-4MP-S
HF-371-6MP-S
HF-371-8MP-S
HF404M-4
HF404M-6
HF406M-4
HF406M-6
HF406M-8
1/4-18
3/8-18
1/4-18
3/8-18
1/2-14
C
B
Dimensions (in.)
Overall
Hex
Largest Wt. (LB)
Length
Size Diameter P/Piece
A
2.19
2.34
2.33
2.33
2.49
B
0.81
0.81
0.94
0.94
1.00
C
0.99
0.99
1.07
1.07
1.07
0.26
0.27
0.33
0.31
0.35
Male Pipe Thread
A
C
B
Dimensions (in.)
Overall
Hex
Largest Wt. (LB)
Length
Size Diameter P/Piece
A
2.34
2.37
2.49
2.52
2.68
B
0.81
0.81
0.94
0.94
0.94
C
0.99
0.99
1.07
1.07
1.07
0.25
0.26
0.32
0.30
0.33
Standard Hose Barb
A
C
B
Body
Size
(in.)
New
Part No.
Steel
Old
Part No.
Steel
Hose
I.D.
Dimensions (in.)
Overall
Hex
Largest Wt. (LB)
Length
Size Diameter P/Piece
1/4
1/4
3/8
3/8
HF-251-4HB-S
HF-251-6HB-S
HF-371-6HB-S
HF-371-8HB-S
HF404HB-4
HF404HB-6
HF406HB-6
HF406HB-8
1/4
3/8
3/8
1/2
A
2.81
2.81
3.02
3.02
Dimensions (in.)
Overall
Hex Largest Wt. (LB)
Length
Size Diameter P/Piece
B
0.81
0.81
0.94
0.94
C
0.99
0.99
1.07
1.07
0.26
0.27
0.31
0.34
Push-Lok Hose Barb
A
C
B
Body
Size
(in.)
New
Part No.
Steel
Old
Part No.
Steel
Hose
I.D.
1/4
1/4
3/8
3/8
HF-251-4PL-S
HF-251-6PL-S
HF-371-6PL-S
HF-371-8PL-S
HF404PL-4
HF404PL-6
HF406PL-6
HF406PL-8
1/4
3/8
3/8
1/2
A-24
A
2.64
2.78
3.02
3.07
B
0.81
0.81
0.94
0.94
C
0.99
0.99
1.07
1.07
0.26
0.27
0.33
0.31
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
General Purpose – Push-To-Connect
Pneumatic Quick Couplings
HA Series
Specifications
Body Size (in.)
Rated Pressure (psi)
Temperature Range (Std. seals)
Locking Device
Vacuum Service
1/4
300
-40° to +250° F
4 balls
Not Recommended
Performance
HA Series (1/4" size)
45
40
35
Air Flow in SCFM
1/4"
Features
30
25
20
15
10
• Parker HA Series couplings are interchangeable with
ARO's 210 series couplings. See Table of Contents.
5
• Push to Connect design for easy one hand operation.
0
• HA Series couplings utilize a tubular valve for maximum
flow and a built-in sleeve guard to minimize accidental
disconnect.
0
5
10
15
20
Pressure Drop in PSID
How To Order
• The HA Series is only available in 1/4" body size.
• HA Series couplings have all brass bodies.
HA - 251 - 4FP - *
• Standard seal material is Nitrile. See the Coupling Selection
and Ordering Information Guide at the beginning of Section
A and the Fluid Compatibility Chart at the end of this
catalog for optional materials.
Seal Options
Blank - Nitrile
F - Fluorocarbon
E - Ethylene Propylene
Port Configuration
• Other port options available – contact the division.
FP - Female Pipe
MP - Male Pipe
• Formerly the 50A Series.
Port Size (1/16 of an inch)
Unit
1 - Valved Coupler
Couplers
Body Size
25 - 1/4"
Female Pipe Thread
HA Series
A
Body
Size
(in.)
NEW
Part No.
Brass
OLD
Part No.
Brass
Thread
Dimensions (in.)
Size Overall Hex Largest Wt. (LB)
NPSF Length Size Diameter P/Piece
C
1/4 HA-251-4FP C50A02-4-4 1/4-18
1/4 HA-251-6FP C50A02-4-6 3/8-18
B
A
2.11
2.14
B
0.81
0.81
C
1.01
1.01
0.26
0.27
Male Pipe Thread
Body
Size
(in.)
A
C
B
NEW
Part No.
Brass
OLD
Part No.
Brass
Thread
Dimensions (in.)
Size Overall Hex Largest Wt. (LB)
NPSF Length Size Diameter P/Piece
A
B
1/4 HA-251-4MP C50A01-4-4 1/4-18 2.26 0.81
1/4 HA-251-6MP C50A01-4-6 1/4-18 2.26 0.81
C
1.01
1.01
0.24
0.24
* See page A-15 for Nipples
A-25
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
UC Series
Features
• The 1/4" UC Series Coupler will accept the industrial
interchange, [(MIL-C-4109F) and (ANSI/(NFPA) T3.20.141990)], 10 Series (Tru-Flate) and the 50 series (ARO 210)
style nipples.
• The coupler features automatic push-to-connect operation,
high flow machined “window valve,” corrosion resistant solid
brass construction and a sleeve guard which helps prevent
accidental disconnects and protects the sleeve from
damage.
• While the best quick coupling performance is obtained by
matching like series couplers and nipples, the universal
coupler permits multiple series nipples to mate with one
coupler.
Specifications
Body Size (in.)
Rated Pressure (PSI)
Temperature Range (Nitrile seal)
Locking Device
Vacuum Service
1/4
150
-40° to +250° F.
4 balls
Not Recommended
Performance
UC Series Coupler (1/4" size)
35
30
How to Order
UC - 251 - 4 FP - *
25
Air Flow in SCFM
A Pneumatics
General Purpose – Push-To-Connect
Pneumatic Quick Couplings
Seal Options
Blank - Nitrile
F - Fluorocarbon
E - Ethylene Propylene
Port Configuration
FP - Female Pipe
MP - Male Pipe
HB - Standard Hose Barb*
PL - Push-Lok Hose Barb*
1/4"
20
15
10
5
Port Size (1/16 of an inch)
Unit
1 - Valved Coupler
0
0
Body Size
5
25 - 1/4"
10
15
20
Pressure Drop in PSID
UC Series
100 PSI Inlet Pressure
80 PSI Inlet Pressure
* Contact the Division for availability
Couplers
Female Pipe Thread
A
B
C
Body
Size
(in.)
New
Part No.
Brass
Old
Pat No.
Brass
Thread
Size
NPSF
1/4
1/4
UC-251-4FP
UC-251-6FP
UC304F-4
UC304F-6
1/4-18
3/8-18
Body
Size
(in.)
New
Part No.
Brass
Dimensions (in.)
Overall
Hex
Largest
Length
Size Diameter
A
2.06
2.21
B
0.81
0.81
C
0.98
0.98
Wt. (LB)
P/Piece
0.23
0.23
Male Pipe Thread
A
B
Old
Part No.
Brass
Thread
Size
NPTF
C
UC304M-4
1/4-18
A
2.21
B
1/4 UC-251-4MP
0.81
0.98
0.22
1/4 UC-251-6MP
UC304M-6
3/8-18
2.24
0.81
0.90
0.23
C
Dimensions (in.)
Overall
Hex
Largest
Length
Size Diameter
Wt. (LB)
P/Piece
Contact the Division for Hose Barb and Push-Lok port availability
A-26
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
30 Series Industrial Interchange
6
7
1
3
2
4
5
8
Component Part Features
1. Precision machining, hardened wear points* and solid bar
stock construction provide long life even in rugged
applications.
2. Tubular valve with large flow passages delivers high flow
with minimum pressure drop for efficient performance. The
tubular design provides 360° support for both the valve
seal and the mating nipple for long service life.
3. Precision molded seals form a “bubble tight” seal for
reliable operation within rated working pressures.
Standard seal material is Nitrile. Ethylene Propylene,
Fluorocarbon and Neoprene are available as options.
4. Locking pawls (pins) constructed of stainless steel create
a durable locking mechanism that provides alignment and
evenly distributes loads.
5. Push-to-connect design permits one-handed connection
when the coupler half is rigidly mounted.
6. Knurling on the sleeve provides a gripping surface for
ease of operation.
7. Wide range of end terminations are available to meet
specific needs. Parker push type couplings are available
with male pipe thread, female pipe thread, standard hose
barb, and Push-Lok hose barb**.
8. Parker 30 Series couplings mate with industrial
interchange design nipples. See Table of Contents.
* steel nipples only
** Push-Lok hose barbs are designed for use with Parker Push-Lok hose and
do not require clamps.
A-27
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
General Purpose – Push-To-Connect
Pneumatic Quick Couplings
30 Series Industrial Interchange
How to Order Information
Available with Sleeve-Lok (See Coupler Options Section).
To order, add the suffix “-SL” to part number, Example: B33-SL.
Brass valves are available for extra corrosion resistance. To
specify a brass valve, add the suffix “N” to the regular part
number. Example: B33N. A brass valve should be used for
corrosive applications where steel parts are not suitable.
Consult the factory for specific recommendations.
Operation
Push type couplings feature one handed “automatic”
connection by pushing the nipple into the coupler–provided
the coupler half is firmly mounted.
The locking mechanism of Parker 30 Series couplers consists
of pawls (or pins) which act directly on the sleeve, thereby
causing the sleeve to automatically retract when the mating
nipple is inserted.
Sleeve must be manually retracted to remove the nipple.
Features
30 Series couplings are push type Single Shut-Off couplings.
• Parker 30 Series couplers are designed for rigid mounting
that allows a simple push-to-connect operation.
Performance
30 Series (1/4" & 3/8" sizes)
• Constructed of a solid brass body and a steel valve, 30
Series couplers are noted for their high flow capability,
reliability and rugged design.
70
60
• Parker 30 Series couplers accept industrial interchange
nipples manufactured by Parker and other manufacturers.
3/8"
50
Air Flow in SCFM
• Standard seal material is Nitrile. See Ordering Information
at the beginning of Section A and the Fluid Compatibility
Chart at the end of this catalog for optional materials.
40
30
1/4"
Specifications
20
Body Size (in.)
1/4
3/8
1/2
3/4
Rated Pressure (PSI)
300
300
300
300
Temperature Range (Std. seals)*
-40° to +250° F.
Locking Device
3 pawls 4 pawls 5 pawls 6 pawls
Vacuum Data (inches Hg)
Disconnected (coupler only)
Not recommended
27.4
Connected
27.4
27.4
27.4
10
0
0
5
10
15
20
Pressure Drop in PSID
100 PSI Inlet Pressure
80 PSI Inlet Pressure
30 Series (1/2" & 3/4" sizes)
220
* See Coupling Selection and Ordering Guide for Optional Seals.
200
Repair Kits
Body
Size
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
3/4
3/4
3/4
180
Seal
Material
Nitrile
Ethylene Propylene
Fluorocarbon
Nitrile
Ethylene Propylene
Fluorocarbon
Nitrile
Ethylene Propylene
Fluorocarbon
Nitrile
Ethylene Propylene
Fluorocarbon
160
Part
No.
21K
21KW
21KY
14K
14KW
14KY
16K
16KW
16KY
38K
38KW
38KY
3/4"
Air Flow in SCFM
A Pneumatics
General Purpose – Push-To-Connect
Pneumatic Quick Couplings
140
120
100
1/2"
80
60
40
20
0
0
5
10
15
20
Pressure Drop in PSID
100 PSI Inlet Pressure
80 PSI Inlet Pressure
A-28
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
30 Series Industrial Interchange
Couplers
Female Pipe Thread
A
C
B
Male Pipe Thread
A
C
B
Body
Size
(in.)
Part
No.
Brass
Thread
Size
NPTF
Overall
Length
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
3/4
3/4
3/4
B33A
B33
B33E
B35C
B35
B35F
B37E
B37
1/8-27
1/4-18
3/8-18
1/4-18
3/8-18
1/2-14
3/8-18
1/2-14
A
1.96
1.96
2.03
2.26
2.33
2.57
2.76
3.00
B
0.75
0.75
0.81
0.88
0.88
1.00
1.00
1.00
C
1.20
1.20
1.20
1.39
1.39
1.39
1.52
1.52
0.30
0.28
0.30
0.42
0.42
0.46
0.56
0.66
B37G
B39F
B39
B39J
3/4-14
1/2-14
3/4-14
1-11 1/2
3.12
2.85
2.99
3.18
1.25
1.31
1.31
1.56
1.52
1.90
1.90
1.90
0.73
0.15
1.10
1.24
Body
Size
(in.)
Part
No.
Brass
Thread
Size
NPTF
Overall
Length
1/4
B32A
1/8-27
A
2.03
B
0.75
C
1.20
0.27
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
3/4
3/4
B32
B32E
B34C
B34
B34F
B36E
B36
B36G
B38
B38J
1/4-18
3/8-18
1/4-18
3/8-18
1/2-14
3/8-18
1/2-14
3/4-14
3/4-14
1-11 1/2
2.18
2.18
2.38
2.44
2.57
2.92
3.09
3.12
2.95
3.12
0.75
0.75
0.88
0.88
0.88
1.00
1.00
1.13
1.31
1.31
1.20
1.20
1.39
1.39
1.39
1.52
1.52
1.52
1.90
1.90
0.28
0.28
0.36
0.39
0.41
0.58
0.61
0.67
0.91
0.99
A-29
Dimensions (in.)
Hex
Largest
Size
Diameter
Dimensions (in.)
Hex
Largest
Size
Diameter
Wt. (LB)
P/Piece
Wt. (LB)
P/Piece
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
General Purpose – Push-To-Connect
Pneumatic Quick Couplings
A Pneumatics
General Purpose – Push-To-Connect
Pneumatic Quick Couplings
30 Series Industrial Interchange
Couplers
Standard Hose Barb
A
C
B
Body
Size
(in.)
Part
No.
Brass
Hose
I.D.
Overall
Length
1/4
1/4
1/4
3/8
3/8
1/2
1/2
3/4
3/4
B30-3B
B30-4B
B30-5B
B34-5B
B34-6B
B36-6B
B36-7B
B38-7B
B38-8B
1/4
5/16
3/8
3/8
1/2
1/2
3/4
3/4
1
A
2.62
2.62
2.62
2.85
2.85
3.33
3.86
3.69
3.93
Dimensions (in.)
Hex
Largest
Size
Diameter
B
0.75
0.75
0.75
0.88
0.88
1.00
1.00
1.31
1.31
C
1.20
1.20
1.20
1.39
1.39
1.52
1.52
1.90
1.90
Wt. (LB)
P/Piece
0.27
0.27
0.28
0.39
0.41
0.59
0.65
0.93
1.03
Push-Lok Hose Barb*
A
C
Body
Size
(in.)
Part
No.
Brass
Hose
I.D.
Overall
Length
1/4
1/4
3/8
1/2
B30-3BP
B30-5BP
B34-5BP
B36-6BP
1/4
3/8
3/8
1/2
A
2.45
2.60
2.82
3.46
Dimensions (in.)
Hex
Largest
Size
Diameter
B
0.75
0.75
0.88
1.00
C
1.20
1.20
1.39
1.52
Wt. (LB)
P/Piece
0.27
0.29
0.40
0.56
* Push-Lok hose barbs are designed for use with Parker Push-Lok hose and
do not require clamps.
B
A-30
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
General Purpose – Push-To-Connect
Pneumatic Quick Couplings
Twist-Lock
Specification
Body Size (in.)
Rated Pressure (PSI)
Temperature Range (Nitrile seal)
Locking Device
Vacuum Service
1/4
300
1/2
300
-40° F to +250° F.
CAM
Not Recommended
Performance
Twist-Lock Series (1/4" size)
35
30
Features
• Push-to-Connect design for easy one hand operation.
• A variety of port configurations are available to meet
specific needs.
Air Flow in SCFM
25
1/4"
20
15
10
• Standard Seals are Nitrile.
• Constructed of Zinc bodies and Zinc plated steel sleeves
and nipples.
5
• Interchanges with Schrader Twist-Lock style couplings.
0
0
Operation
5
10
15
20
Pressure Drop in PSID
• Engineered for speedy coupling and uncoupling. To lock –
push in; to unlock – give the coupler sleeve a 1/8 turn.
Designed to protect against accidental uncoupling.
100 PSI Inlet Pressure
80 PSI Inlet Pressure
How To Order
TL-251-4FP
Port Configuration
FP - Female Pipe
MP - Male Pipe
HB - Standard Hose Barb
PL - Push-Lok Hose Barb
Port Size (1/16 of an inch)
Unit
1 - Valved Coupler
4 - Unvalved Nipple
Body Size
25 - 1/4"
50 - 1/2"
TL Series
A-31
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
General Purpose – Push-To-Connect
Pneumatic Quick Couplings
Twist-Lock
Couplers
Female Thread
A
C
B
Male Thread
Body
Size
(in.)
NEW
Part No.
Steel
OLD
Part No.
Steel
Thread
Size
NPT
Dimensions (in.)
Overall
Hex Largest Wt. (LB)
Length
Size Diameter P/Piece
1/4
1/2
1/2
1/2
TL-251-4FP
TL-501-6FP
TL-501-8FP
TL-501-12FP
8052-0319
1095-0040
1461-0070
1462-0040
1/4-18
3/8-18
1/2-14
3/4-14
Body
Size
(in.)
NEW
Part No.
Steel
OLD
Part No.
Steel
Thread
Size
NPT
1/4
1/4
1/2
1/2
TL-251-4MP
TL-251-6MP
TL-501-6MP
TL-501-8MP
3060-0109
3061-0109
3080-0020
3081-0020
1/4-18
3/8-18
3/8-18
1/2-14
Body
Size
(in.)
NEW
Part No.
Steel
OLD
Part No.
Steel
Thread
Size
NPT
1/4
TL-254-2FP
2047-0010
1/8-27
D
1.53
E
0.56
F
0.65
0.04
1/4
1/2
1/2
TL-254-4FP
TL-504-4FP
TL-504-6FP
8278-0050
1261-0020
1096-0010
1/4-18
1/4-18
3/8-18
1.81
1.68
1.84
0.69
0.69
0.88
.79
0.80
1.01
0.07
0.14
0.14
Body
Size
(in.)
NEW
Part No.
Steel
OLD
Part No.
Steel
Thread
Size
NPT
8051-0010
8050-0110
8624-0070
1095-0020
1461-0050
1462-0100
1/8-27
1/4-18
1/4-18
3/8-18
1/2-14
3/4-14
A
2.01
2.19
2.50
2.56
B
0.75
1.13
1.13
1.13
C
1.12
1.50
1.50
1.50
0.21
0.44
0.44
0.44
A
C
B
Dimensions (in.)
Overall
Hex Largest Wt. (LB)
Length
Size Diameter P/Piece
A
2.23
2.26
2.31
2.75
B
0.75
0.75
1.13
1.13
C
1.12
1.12
1.50
1.50
0.21
0.22
0.39
0.40
Nipples
Female Thread
D
F
E
Dimensions (in.)
Overall
Hex Largest Wt. (LB)
Length
Size Diameter P/Piece
Male Thread
D
F
1/4 TL-254-2MP
1/4 TL-254-4MP
1/2 TL-504-4MP
1/2 TL-504-6MP
1/2 TL-504-8MP
1/2 TL-504-12MP
E
Dimensions (in.)
Overall
Hex Largest Wt. (LB)
Length
Size Diameter P/Piece
D
1.65
1.75
1.87
1.93
2.16
2.16
E
0.56
0.56
0.69
0.69
0.88
1.06
F
0.65
0.65
0.80
0.80
1.01
1.22
0.05
0.05
0.12
0.12
0.13
0.14
Standard Hose Barb
D
Body
Size
(in.)
NEW
Part No.
Steel
OLD
Part No.
Steel
Thread
Size
NPT
1/4
1/4
1/2
1/2
1/2
TL-254-4HB
TL-254-6HB
TL-504-4HB
TL-504-6HB
TL-504-8HB
8787-0040
8788-0030
2123-0030
1097-0010
1098-0010
1/4
3/8
1/4
3/8
1/2
F
A-32
Dimensions (in.)
Overall
Largest
Wt. (LB)
Length
Diameter
P/Piece
D
1.83
1.83
2.31
2.28
2.28
F
0.50
0.50
0.80
0.69
0.81
0.04
0.06
0.10
0.11
0.12
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Special Purpose – Standard - Non Marring
Tool-Mate Series
Features
• Standard style Tool-Mate couplers are lightweight, easy to
operate, and non-marring with easy, push-to-connect action.
• Couplers are constructed of Polyamide material; springs,
balls, and pins are stainless steel; and locking fingers are
made of polyacetate.
• PBH Tool-Mate Series is built to the Industrial Interchange
profile identifiable with a Yellow ring around the body.
• PER Tool-Mate Series is designed to use with Parker's high
flow RF Series nipples and is indentifiable with a Green ring
around the body.
• Grey body designates standard non-venting style coupler.
Operation
• Push-to-Connect design for easy one hand operation.
• Pull in the direction of the arrow indicated on the body of the
coupler to release the nipple.
Specifications
Body Size
Rated Pressure
Temperature Range (°F)
Vacuum Service
1/4”
3/8”
300
300
0 to 160
0 to 160
Not Recommended
Performance
How To Order
PBH - 251 - 4 FP
Tool-Mate Series Standard (1/4” & 3/8” sizes)
70
Port Configuration
FP - Female Pipe
MP - Male Pipe
60
Port Size (1/16 of an inch)
Unit
1 - Valved Coupler
Body Size
50
Air Flow in SCFM
4 - 1/4”
6 - 3/8”
8 - 1/2”
25 - 1/4”
37 - 3/8”
3/8" PBH
1/4" PER
40
30
20
Tool-Mate Series (Non-venting)
1/4" PBH
PBH - Industrial Interchange
PER - RF Interchange
10
0
0
5
10
15
20
Pressure Drop in PSID
100 PSI Inlet Pressure
A-33
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
Pneumatic Quick Couplings
A Pneumatics
Special Purpose – Standard - Non Marring
Pneumatic Quick Couplings
Tool-Mate Series
Industrial Interchange
Female Pipe Thread
Body
Size
(in.)
Part
No.
Thread
Size
NPTF
Overall
Length
1/4-18
3/8-18
1/4-18
3/8-18
1/2-14
2.60
2.67
2.95
2.95
3.17
0.67
0.91
0.67
0.83
0.99
Thread
Size
NPTF
Overall
Length
Hex
Size
A
B
1/4-18
3/8-18
1/4-18
3/8-18
2.97
2.99
3.39
3.39
0.67
0.91
0.83
0.83
A
A
1/4"
1/4"
3/8"
3/8"
3/8"
C
B
Male Pipe Thread
Body
Size
(in.)
PBH-251-4FP
PBH-251-6FP
PBH-371-4FP
PBH-371-6FP
PBH-371-8FP
Part
No.
A
C
B
1/4"
1/4"
3/8"
3/8"
PBH-251-4MP
PBH-251-6MP
PBH-371-4MP
PBH-371-6MP
Hex
Size
B
Largest
Diameter
Wt. (LB)
P/Piece
C
1.19
1.19
1.38
1.38
1.38
Largest
Diameter
0.13
0.15
0.21
0.20
0.22
Wt. (LB)
P/Piece
C
1.19
1.19
1.38
1.38
0.14
0.19
0.23
0.23
Largest
Diameter
Wt. (LB)
P/Piece
RF Interchange
Female Pipe Thread
A
Thread
Size
NPTF
Body
Size
(in.)
Part
No.
A
B
1/4"
1/4"
PER-251-4FP
PER-251-6FP
1/4-18
3/8-18
2.83
2.83
0.83
0.83
1.25
1.25
Body
Size
(in.)
Part
No.
Thread
Size
NPTF
Overall
Length
Hex
Size
Largest
Diameter
1/4-18
3/8-18
2.36
2.40
C
B
Overall
Length
Hex
Size
C
0.17
0.15
Male Pipe Thread
A
A
C
B
1/4"
1/4"
PER-251-4MP
PER-251-6MP
A-34
B
0.83
0.83
Wt. (LB)
P/Piece
C
1.25
1.25
0.19
0.18
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Tool-Mate Series
Features
• Exhaust style Tool-Mate couplers are lightweight, easy to
operate, and non-marring with easy, push-to-connect action
and one-handed disconnection.
• Couplers are constructed of black Polyamide material;
springs, balls, and pins are stainless steel in the PES
series and 1/2" PBS series; and locking fingers in the PBS
series are made of polyacetate. End ports are galvanized
steel.
• PBS Tool-Mate Series is built to the Industrial Interchange
profile identifiable with a Yellow ring around the body.
• PES Tool-Mate Series is designed for use with high flow RF
Series nipples and is identifiable with a Green ring around
the body.
• Exhaust style Tool-Mate couplers meet the ISO 4414
specification to allow trapped air pressure to be vented
prior to disconnection.
• Black body designates exhaust style coupler.
Operation
Specifications
• Push-to-Connect design for easy one hand operation.
Body Size
Rated Pressure
Temperature Range (°F)
1/4”
300
0 to 160
Vacuum Service
3/8”
300
0 to 160
1/2”
300
0 to 160
• Pull the body in the direction of the arrow marked 1, this will
safely vent the downstream pressure.
• Push the body in the direction of arrow 2 to disconnect at 0
pressure.
Not Recommended
How To Order
Performance
Tool-Mate Series Exhaust (1/4”, 3/8” & 1/2” sizes)
PBS - 251 - 4 FP
180
Port Configuration
160
FP - Female Pipe
MP - Male Pipe
140
Port Size (1/16 of an inch)
Unit
1 - Valved Coupler
120
Air Flow in SCFM
4 - 1/4”
6 - 3/8”
8 - 1/2”
12 - 3/4”
1/2" PBS
100
80
60
3/8" PBS
Body Size
25 - 1/4”
37 - 3/8”
50 - 1/2”
1/4" PES
40
20
1/4" PBS
Tool-Mate Series (Exhaust)
0
PBS - Industrial Interchange
PES - RF Interchange
0
5
10
15
20
Pressure Drop in PSID
100 PSI Inlet Pressure
A-35
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
Special Purpose – Exhaust - Non Marring
Pneumatic Quick Couplings
A Pneumatics
Special Purpose – Exhaust - Non Marring
Pneumatic Quick Couplings
Tool-Mate Series
Exhaust Industrial Interchange
Female Pipe Thread
Body
Size
(in.)
Part
No
A
C
B
Male Pipe Thread
1/4"
1/4"
3/8"
3/8"
1/2"
1/2"
1/2"
Body
Size
(in.)
PBS-251-4FP
PBS-251-6FP
PBS-371-6FP
PBS-371-8FP
PBS-501-6FP
PBS-501-8FP
PBS-501-12FP
Part
No.
Thread
Size
NPTF
Wt. (LB)
P/Piece
Overall
Length
Hex
Size
Largest
Diameter
A
B
C
1/4-18
3/8-18
3/8-18
1/2-14
3/8-18
1/2-14
3/4-14
2.60
2.67
2.95
3.17
3.25
3.36
3.66
0 .67
0.91
0.82
0.99
1.18
1.18
1.18
1.19
1.19
1.38
1.38
1.62
1.62
1.62
Thread
Size
NPTF
Overall
Length
Hex
Size
Largest
Diameter
A
B
C
2.97
2.99
3.39
3.39
3.70
0.67
0.91
0.82
0.91
1.18
1.19
1.19
1.38
1.38
1.62
0.14
0.19
0.23
0.28
0.50
Overall
Length
Hex
Size
Largest
Diameter
Wt. (LB)
P/Piece
0.13
0.15
0.20
0.22
0.50
0.50
0.50
Wt. (LB)
P/Piece
A
C
B
1/4"
1/4"
3/8"
3/8"
1/2"
PBS-251-4MP
PBS-251-6MP
PBS-371-6MP
PBS-371-8MP
PBS-501-8MP
1/4-18
3/8-18
3/8-18
1/2-18
1/2-18
Exhaust RF Interchange
Female Pipe Thread
Body
Size
(in.)
Part
No.
Thread
Size
NPTF
A
A
C
1/4"
1/4"
PES-251-4FP
PES-251-6FP
1/4-18
3/8-18
2.83
2.83
B
C
0.83
0.83
1.25
1.25
0.17
0.15
Largest
Diameter
Wt. (LB)
P/Piece
B
Male Pipe Thread
Body
Size
(in.)
Part
No.
Thread
Size
NPTF
A
C
1/4"
1/4"
PES-251-4MP
PES-251-6MP
1/4-18
3/8-18
Overall
Length
Hex
Size
A
B
C
2.36
2.40
0.83
0.83
1.25
1.25
0.19
0.18
B
A-36
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
E-z-mate Series Industrial Interchange
Features
• Parker's E-z-mate is an exhaust type coupler that is designed
to exhaust air pressure prior to the disconnection process.
• The valve sleeve acts as an integral shut-off valve that
allows connection and disconnection at zero pressure.
When the sleeve is moved to shut off air flow, it
automatically vents downstream allowing for disconnection
at zero pressure and eliminating the risk of “hose whip.”
• Meets ISO 4414 requirements for a controlled pressure
release system.
• Built-in sleeve-lok mechanically locks the valve sleeve to
help prevent accidental disconnects.
• Proven ball locking mechanism evenly distributes load to
resist wear and provide positive connections. The ball
locking mechanism also provides accurate alignment and
allows a swiveling action to reduce hose torque.
• O-ring interface seal assures “bubble tight” seal and long
service life.
• E-z-mate Series couplers use industrial interchange nipples.
• Brass versions available. Contact the division for availability.
Operation
Parker E-z-mate couplings combine push-to-connect,
exhaust-style action with a self-locking valve sleeve to guard
against accidental disconnection. Simply follow the direction
of the On-Off arrow stamped on the yellow chromate valve
sleeve. It’s that easy.
Performance
E-z-mate Series (1/4" & 3/8" sizes)
To connect, push the nipple into the coupler. The black locking
sleeve automatically slides forward securely locking the nipple
in place. No air is allowed to flow through the coupling at this
point. The yellow chromate valve sleeve is then rotated
clockwise (when viewed from the coupler port end) to open
flow and automatically engage the sleeve-lock mechanism.
80
70
3/8"
Air Flow in SCFM
60
To disconnect, rotate the valve sleeve counter clockwise
(when viewed from the coupler end). The flow of air through
the coupling will be shut off and all downstream air is vented
to the atmosphere. The locking sleeve may now be retracted
and the nipple removed. Lubricate sleeve as part of periodic
maintenance to coupler.
50
40
30
1/4"
20
Specifications
10
Body Size (in.)
Rated Pressure (PSI)
Temperature Range (std seals)
Locking Device
Force required to Connect (lbs)
Vacuum Service
1/4
300
3/8
1/2
3/4
300
300
300
-40° to +250° F.
4 balls 4 balls 6 balls 8 balls
Less than 10
Not recommended
0
0
5
10
15
20
Pressure Drop in PSID
80 PSI Inlet Pressure
100 PSI Inlet Pressure
E-z-mate Series (1/2" & 3/4" sizes)
240
220
How To Order
EZ - 251 - 4 FP
200
3/4"
180
Port Configuration
Air Flow in SCFM
FP - Female Pipe
MP - Male Pipe
HB - Standard Hose Barb
PL - Push-Lok Hose Barb
Port Size (1/16 of an inch)
Unit
160
140
120
100
80
1 - Valved Coupler
4 - Unvalved Nipple
1/2"
60
Body Size
40
25 - 1/4"
37 - 3/8"
50 - 1/2"
75 - 3/4"
20
0
0
E-z-mate Series
5
10
15
20
Pressure Drop in PSID
100 PSI Inlet Pressure
80 PSI Inlet Pressure
A-37
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
Special Purpose – Exhaust - Steel
Pneumatic Quick Couplings
Couplers
Female Pipe Thread
OFF
A
ON
C
E-z-mate Series Industrial Interchange
Body
Size
(in.)
New
Part No.
Steel
Old
Part No.
Steel
Thread
Size
NPTF
1/4
1/4
3/8
3/8
1/2
1/2
3/4
3/4
EZ-251-4FP
EZ-251-6FP
EZ-371-6FP
EZ-371-8FP
EZ-501-8FP
EZ-501-12FP
EZ-751-12FP
EZ-751-16FP
EZ304F-4T
EZ304F-6T
EZ306F-6T
EZ306F-8T
EZ308F-8T
EZ308F-12T
EZ312F-12T
EZ312F-16T
1/4-18
3/8-18
3/8-18
1/2-14
1/2-14
3/4-14
3/4-14
1-11 1/2
Body
Size
(in.)
New
Part No.
Steel
Part
No.
Steel
Thread
Size
NPTF
1/4
1/4
3/8
1/2
3/4
EZ-251-4MP
EZ-251-6MP
EZ-371-6MP
EZ-501-8MP
EZ-751-12MP
EZ304M-4T
EZ304M-6T
EZ306M-6T
EZ308M-8T
EZ312M-12T
1/4-18
3/8-18
3/8-18
1/2-14
3/4-14
Body
Size
(in.)
New
Part No.
Steel
Old
Part No.
Steel
Hose
I.D.
1/4
1/4
3/8
1/2
EZ-251-4HB
EZ-251-6HB
EZ-371-6HB
EZ-501-8HB
EZ304HB-4T
EZ304HB-6T
EZ306HB-6T
EZ308HB-8T
1/4
3/8
3/8
1/2
Body
Size
(in.)
New
Part No.
Steel
Old
Part No.
Steel
Hose
I.D.
1/4
1/4
3/8
1/2
EZ-251-4PL
EZ-251-6PL
EZ-371-6PL
EZ-501-8PL
EZ304PL-4T
EZ304PL-6T
EZ306PL-6T
EZ308PL-8T
1/4
3/8
3/8
1/2
Dimensions (in.)
Overall
Hex
Largest
Length
Size
Diameter
A
2.25
2.68
2.53
3.00
3.01
3.44
3.01
3.52
B
0.75
0.88
0.88
1.12
1.12
1.38
1.38
1.56
C
1.00
1.01
1.18
1.30
1.38
1.59
1.57
1.80
Wt. (LB)
P/Piece
0.25
0.29
0.38
0.50
0.65
0.70
0.76
0.92
B
Male Pipe Thread
OFF
A
C
ON
Dimensions (in.)
Overall
Hex
Largest
Length
Size
Diameter
A
2.85
2.87
3.10
3.62
3.70
B
0.75
0.75
0.88
1.12
1.38
C
1.00
1.00
1.18
1.38
1.57
Wt. (LB)
P/Piece
0.30
0.31
0.44
0.73
0.90
B
Standard Hose Barb
OFF
A
ON
C
Dimensions (in.)
Overall
Hex
Largest
Length
Size
Diameter
A
3.20
3.20
3.43
4.06
B
0.75
0.75
0.88
1.12
C
1.00
1.00
1.18
1.40
Wt. (LB)
P/Piece
0.28
0.29
0.42
0.70
B
Push-Lok Hose Barb*
OFF
A
C
ON
A Pneumatics
Special Purpose – Exhaust - Steel
Pneumatic Quick Couplings
Dimensions (in.)
Overall
Hex
Largest
Length
Size
Diameter
A
3.03
3.18
3.38
3.91
B
0.75
0.75
0.88
1.12
C
1.00
1.00
1.18
1.38
Wt. (LB)
P/Piece
0.28
0.29
0.42
0.70
B
* Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps.
Note: See Table of Contents for Industrial Interchange nipples used with E-z-mate Series couplers.
A-38
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
Special Purpose – Breathing Air
Pneumatic Quick Couplings
CJ Series
Specifications
Body Size (in.)
1/4
Rated Pressure (PSI)
150
Temperature Range (Std. Seals) -40° to +250° F.
Locking Device
4 balls
Vacuum Service
Not Recommended
Performance
CJ Series (1/4" size)
50
45
40
• Parker CJ series couplings feature a unique design that
allows for simple push-to connect operation yet requires a
two step process to disconnect. To disconnect, the nipple
must be pushed into the coupler before the coupler sleeve
can be retracted.
35
Air Flow in SCFM
Features
1/4"
30
25
20
15
• This sleeve locking feature greatly reduces the potential of
accidental disconnects in applications where connection
integrity is of primary importance.
10
5
• Typical uses include rescue and breathing air equipment in
addition to general pneumatic applications.
0
0
• Couplers feature solid brass construction, nickel plating,
sleeve guard, high flow window valve, stainless steel
springs and locking balls.
5
10
15
20
Pressure Drop in PSID
100 PSI Inlet Pressure
80 PSI Inlet Pressure
• Nitrile seals are standard with Ethylene Propylene seals
available by adding an “E” suffix to the part number.
Example: CJ-251-4MP-E.
• Nipples feature heat treated solid steel bar stock
construction and nickel plating. CJ series couplings are
available in 1/4" body size with 1/4" and 3/8" male pipe,
female pipe, and hose barb ports.
How To Order
CJ - 251 - 4 FP - *
• Interchanges with CEJN 342/343 series.
Seal Options
Blank - Nitrile
E - Ethylene Propylene
Port Configuration
FP - Female Pipe
MP - Male Pipe
HB - Standard Hose Barb
Port Size (1/16 of an inch)
Unit
1 - Valved Coupler
4 - Unvalved Nipple
Body Size
25 - 1/4"
CJ Series Coupler/Nipple
A-39
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Special Purpose – Breathing Air
Pneumatic Quick Couplings
CJ Series
Couplers
Female Pipe
A
Body
Size
(in.)
B
New
Part No.
Brass
Part
No.
Brass
Thread
Dimensions (in.)
Size Overall Hex Largest Wt. (LB)
NPSF Length Size Diameter P/Piece
C
1/4
1/4
CJ-251-4FP CJ304F-4 1/4-18
CJ-251-6FP CJ304F-6 3/8-18
A
2.40
2.55
B
0.81
0.81
C
0.99
0.99
0.28
0.30
Male Pipe
A
Body
Size
(in.)
B
New
Part No.
Brass
Old
Part No.
Brass
Thread
Dimensions (in.)
Size Overall Hex Largest Wt. (LB)
NPTF Length Size Diameter P/Piece
C
1/4
1/4
CJ-251-4MP CJ304M-4
CJ-251-6MP CJ304M-6
1/4-18
3/8-18
A
2.55
2.58
B
0.81
0.81
C
0.99
0.99
0.26
0.27
Hose Barb
A
B
C
Body
Size
(in.)
1/4
1/4
New
Part No.
Brass
Old
Part No.
Brass
Dimensions (in.)
Hose Overall Hex Largest Wt. (LB)
I.D. Length Size Diameter P/Piece
CJ-251-4HB CJ304HB-4
CJ-251-6HB CJ304HB-6
A
3.02
3.02
1/4
3/8
B
0.81
0.81
C
0.99
0.99
0.25
0.25
Nipples
Female Pipe
D
E
Body
Size
(in.)
G
New
Part No.
Steel
Old
Part No.
Steel
Thread
Dimensions (in.)
Size Overall Exposed Hex Largest Wt. (LB)
NPTF Length Length* Size Diameter P/Piece
D
1/4 CJ-254-4FP CJ604F-4 1/4-18 1.60
1/4 CJ-254-6FP CJ604F-6 3/8-18 1.68
F
E
0.74
0.80
F
0.62
0.81
G
0.72
0.94
0.06
0.09
* This dimension represents the portion that is exposed when a nipple is inserted
into a Parker CJ Series coupler.
Male Pipe
Body
Size
(in.)
D
E
G
F
New
Part No.
Steel
Old
Part No.
Steel
Thread
Dimensions (in.)
Size Overall Exposed Hex Largest Wt. (LB)
NPTF Length Length* Size DiameterP/Piece
D
1/4 CJ-254-4MP CJ604M-4 1/4-18 1.71
1/4 CJ-254-6MP CJ604M-6 3/8-18 1.76
E
0.89
0.92
F
0.56
0.69
G
0.72
0.94
0.06
0.07
* This dimension represents the portion that is exposed when a nipple is inserted
into a Parker CJ Series coupler.
Hose Barb
Body
Size
(in.)
D
E
New
Part No.
Steel
Part
No.
Steel
Dimensions (in.)
Hose Overall Exposed Largest Wt. (LB)
I.D. Length Length* Diameter P/Piece
G
1/4 CJ-254-4HB CJ604HB-4 1/4
1/4 CJ-254-6HB CJ604HB-6 3/8
D
1.83
1.83
E
0.96
0.96
G
0.50
0.50
0.04
0.04
* This dimension represents the portion that is exposed when a nipple is inserted
into a Parker CJ Series coupler.
A-40
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Hose Fittings
Male Reusable Hose End
Part No.
Brass
Hose
I.D.
HOSE
O.D.
Thread
Size NPTF
Overall
Length
Hex
Size
Hex
Size
Largest
Diameter
Wt. (LB)
P/Piece
330-C3
330-C5
330-C6
332-E6
332-E7
332-E8
332-E10
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
9/16
5/8
5/8
21/32
11/16
3/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
A
1.720
1.720
1.720
2.095
2.095
2.095
2.095
B
0.56
0.56
0.56
0.56
0.56
0.56
0.56
C
0.69
0.75
0.81
0.88
0.88
0.88
0.94
D
0.79
0.87
0.94
1.01
1.01
1.01
1.08
–
–
–
–
–
–
–
A
D
C
B
Female Hose Barb
A
Part
No.
Brass
Hose
I.D.
Thread
Size
NPTF
Overall
Length
Hex
Size
Largest
Diameter
Wt. (LB)
P/Piece
311
311-3/8
1/4
3/8
1/4
1/4
A
1.58
1.58
B
–
–
C
–
–
0.05
0.05
Part
No.
Hose
I.D.
Thread
Size
NPTF
Overall
Length
Hex
Size
Largest
Diameter
Weight
P/Piece
308
310
310-5/16
310-3/8
310-1/2
318
318-1/4
318-1/2
322
322-3/8
322-3/4
1/4
1/4
5/16
3/8
1/2
3/8
1/4
1/2
1/2
3/8
3/4
1/8
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
A
1.54
1.64
1.64
1.64
1.64
1.71
1.71
1.71
1.86
1.86
1.86
B
0.44
0.56
0.56
0.56
0.56
0.69
0.69
0.69
0.88
0.88
0.88
C
0.50
0.65
0.65
0.65
0.65
0.79
0.79
0.79
1.01
1.01
1.01
0.02
0.02
0.03
0.11
0.04
0.05
0.04
0.06
0.10
0.09
0.13
C
B
Male Hose Barb
A
C
B
Brass Hose Splicer
A
Part No.
Brass
Hose
I.D.
Overall
Length
Largest
Diameter
314
314-5/16
314-3/8
1/4
5/16
3/8
A
2.00
2.00
2.00
B
0.38
0.50
0.56
Wt. (LB)
P/Piece
0.01
0.02
0.03
B
A-41
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
Accessories
Pneumatic Quick Couplings
A Pneumatics
Accessories
Pneumatic Quick Couplings
Blow Guns (Controlled Pressure)
Features
• Parker Controlled Pressure Blow Guns meet OSHA
requirements (section 29 CFR 1910.242 paragraph b), and
directive #100-1. “Compressed air shall not be used for
cleaning purposes except where reduced to less than 30
psi, and then only with effective chip guarding and personal
protective equipment.”
• Parker Controlled Pressure Blow Guns have a black epoxy
coated zinc body and vented nozzles to prevent pressure
build-up when dead ending occurs up to 150 psi.
Specifications
Description
410-S – Parker Controlled
Pressure Blow Guns
features thumb lever valve
actuator and brass nozzle.
Inlet port is 1/4" NPT.
Part
No.
Maximum
Pressure
Wt. (LB)
P/Piece
410-S
410-SV
415-S
150 PSI.
150 PSI
150 PSI
0.50
0.53
0.48
410-SV – Parker Venturi
Nozzle Controlled Pressure
Blow Gun with thumb lever
valve and large venturi side
ports for high volume flow.
Inlet port is 1/4" NPT.
415-S – Parker Controlled
Pressure Blow Guns
features push button valve
actuator and brass nozzle.
Inlet port is 1/4" NPT.
Part No. 400-S-TIP
Blow Gun
Replacement Tip
Accessories
Blow Guns (Full Pressure)
The following Parker Blow Guns must have a pressure
regulator setting below 30 psi to conform to OSHA safety
requirements 29 CFR 1910.242 Paragraph b.
Specifications
Description
410 – Parker two way thumb
lever valve has an zinc body
with 1/4" NPT inlet and 1/8"
NPSF outlet.
Note: Standard Gun without
nozzle.
Part
No.
Maximum
Pressure
Wt. (LB)
P/Piece
410
410-N
415-N
150 PSI
150 PSI
150 PSI
0.48
0.51
0.49
410-N – Parker thumb lever
style Blow Gun features a
zinc body, brass nozzle, and
1/4" NPT female inlet.
415-N – Parker Blow Gun
features a push button style
actuator, zinc body with a
brass nozzle and 1/4" NPT
female inlet.
A-42
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
BG Series
Description
Made from impact resistant plastic, BG Series blow guns are
durable and versatile. Extended nozzles allow air to be
directed where it is required. The pistol grip trigger allows
greater control over the amount of air delivered. Combined,
these two features provide superior performance in a light
weight, ergonomically designed package.
Nozzles are available in short and extended versions and
most models meet OSHA directives on the use of
compressed air for cleaning purposes. OSHA directive #100-1
states that "when dead ending occurs a static pressure at the
main orifice shall not exceed 30 psi." For those blow guns that
do not meet this requirement, OSHA requires that
"compressed air shall not be used for cleaning purposes
except where reduced to less than 30 psi, and then only with
effective chip guarding and personal protective equipment"
(section 29 CFR 1910.242 paragraph b). Please refer to the
blow gun descriptions below for compatibility with OSHA
directive #100-1.
Part
Number
Nozzle
Meets OSHA
Requirements
BG441-NBL
Extended
No
Part
Number
Nozzle
Meets OSHA
Requirements
BG442-SBL
Extended
Yes
Nozzle configurations are designed for maximum flexibility.
Applications with special requirements may find the BG443NBL with a 1/8" NPT fitting convenient for adapting existing
nozzles or extra-long extensions. For information on specials
or made-to-order blow gun nozzles, please contact the Quick
Coupling Division.
Features
• Easy to control variable flow pistol grip trigger.
• Nozzles available that meet OSHA requirements.
• Lightweight ergonomical design.
• Bodies are constructed of impact resistant plastic.
Part
Number
Nozzle
Meets OSHA
Requirements
BG443-NBL
1/8” Female NPT
No
Specifications
Part
Number
Nozzle
Meets OSHA
Requirements
BG444-SBL
Vortec
Yes
Rated Pressure (PSI)
Temperature Range
Inlet Port
How to Order
BG Part Number:
Part
Number
Nozzle
Meets OSHA
Requirements
BG445-SBL
Two Inch
Yes*
175 psi
to 120° F
1/4” NPTF
BG 442 - SBL
Color
BL - Black
Meets OSHA Requirement
S - Yes
N- No
Nozzle Style
41 - Extended
42 - Extended (Meets OSHA Requirement)
43 - 1/8" FNPT
44 - Short (Meets OSHA Requirement)
45 - 2" (Meets OSHA Requirement)
* 90 PSI MAX Inlet
Inlet Port in 16ths
BG Series Blow Gun
A-43
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
A Pneumatics
Accessories
Pneumatic Quick Couplings
A Pneumatics
Accessories
Pneumatic Quick Couplings
Two-Way Valves
Features
• Parker two-way valves are designed for use in air or liquid
service.
Description
P410B – Two way valve with
forward positioned lever
handle. Inlet and outlet ports
are 1/4" NPT.
• Bodies are constructed of black molded polypropylene.
• The valve cartridge components are machined from brass
and stainless steel for corrosion resistance and long life.
• Nitrile stem seals are standard. Add suffix Y for optional
fluorocarbon seal. Consult factory for price and delivery.
Specifications
Rated Pressure (PSI)
Temperature Range
P415B – Two way valve
features push button style
valve actuator. Inlet and outlet
ports are 1/4" NPT.
175 @ 70° F
120 @ 180° F
-20° to 180° F
P420B – Reverse oriented
lever handle is used in carpet
cleaning applications which
utilize tube mounted valves.
Inlet and outlet ports are 1/4".
A-44
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B-1
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Hydraulic
Quick
Couplings
Introduction
Hydraulic Quick Couplings
B Hydraulics
Double Shut-Off and Straight-Thru Couplings
off valves. These valves open automatically when the body
and nipple are connected, and close automatically when the
two halves are disconnected—keeping fluid loss to a
minimum.
Parker hydraulic couplings have a wide variety of designs,
each tailored to a particular application or use. This catalog is
arranged according to those categories. In each section the
construction of a specific design will be detailed. However,
based on the valving of the coupling, hydraulic couplings
generally fall into one of two groups, either Double Shut-Off
or Straight-Thru.
Parker Straight-Thru couplings have no valves in either half
and are ideal for maximum flow application. Their smooth,
open bore offers the lowest pressure drop of any quick
disconnect coupling, and allows them to be thoroughly
cleaned. Since there are no valves in either half, fluid flow
should be shut off before the coupling is disconnected.
Double Shut-Off couplings are used extensively when it is
important to minimize fluid loss upon disconnection. Both
halves of the coupler, the body and the nipple, contain shut-
Rated Pressure
even if the system’s nominal pressure falls within the rated
pressure range of the coupling.
Rated pressure for the Parker hydraulic couplings range from
30 to 15,000 psi, depending on the coupling series, size and
materials. Rated pressures as shown in this catalog are
defined in the American National Standard Glossary of Terms
for Fluid Power, ANSI/B93.2-1986, as “the qualified operating
pressures which are recommended for a component or a
system by the manufacturer.” Parker “Rated Pressures” have
been established on the basis of laboratory tests which
include, but are not limited to, static burst tests and multiple
cycle impulse tests. System characteristics such as high
cycling rates and high amplitude shocks either hydraulic or
mechanical, can reduce the functioning life of a coupling,
For assistance in analyzing your application, contact your
nearest Parker sales office or the Quick Coupling Division
in Minneapolis.
Refer to the Safety Guide at the end of this catalog for
considerations when selecting a Quick Coupling.
Refer to the Fluid Compatibility Chart (note Table of Contents)
for seal selection assistance for both Double Shut-Off and
Straight-Thru couplings.
Checklist for Selecting Quick Couplings
❑
❑
❑
❑
❑
❑
What are the functional requirements of the coupling?
What is the maximum working pressure of the application?
Which seals and body material are compatible with the
system’s fluid?
Is the application static or dynamic?
What size coupler is required?
❑
❑
❑
❑
❑
Does the application require the ability to connect
and disconnect under pressure?
What is the media temperature and ambient temperature?
What end configurations are required?
Is an industry interchange coupler required?
Is air inclusion and fluid loss a concern in the application?
What is the maximum pressure drop suitable for
the application?
B-2
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Table of Contents
FH Series.........................................................B-31-32
Couplers..............................................................B-32
Nipples ................................................................B-32
FS Series .........................................................B-33-34
Couplers..............................................................B-34
Nipples ................................................................B-34
Repair Kits...........................................................B-34
Connect Under Pressure Couplings
6100 Series......................................................B-35-37
Couplers.........................................................B-36-37
Nipples ................................................................B-37
8200 Series......................................................B-38-39
Couplers..............................................................B-39
Nipples ................................................................B-39
9200 Series......................................................B-40-41
Couplers..............................................................B-41
Nipples ................................................................B-41
5000 Series......................................................B-42-43
Couplers..............................................................B-43
Nipples ................................................................B-43
High Pressure Couplings
3000 Series......................................................B-44-45
Couplers..............................................................B-45
Nipples ................................................................B-45
TC Series ..............................................................B-46
Couplers..............................................................B-46
Nipples ................................................................B-46
1141 Series...........................................................B-47
Mold Coolant Line Couplings
Moldmate Series..............................................B-48-52
Couplers.........................................................B-49-50
Sub Assemblies & Replacement Parts ...............B-50
Nipples ...........................................................B-51-52
High Flow Couplings
ST Series .........................................................B-53-55
Couplers..............................................................B-54
Nipples ................................................................B-55
Water Service........................................................B-56
HO Series..............................................................B-57
Special Purpose - Miniature
DM Series.......................................................B58-B59
Dust Plugs and Dust Caps ............................B-60-62
Ordering Information ...........................................B-63
Promotional Products-Keychains .......................B-64
Introduction .............................................................B-2
Coupling Selection Guide ......................................B-4
General Purpose Couplings
60 Series .............................................................B-5–8
Couplers............................................................B-7–8
Nipples ..............................................................B-7–8
Repair Kits & Replacement Parts ...........................B-8
60 Series Steam .....................................................B-9
Couplers................................................................B-9
Nipples ..................................................................B-9
6600 Series.....................................................B-10–11
Couplers..............................................................B-11
Nipples ................................................................B-11
SM Series .......................................................B-12–13
Couplers..............................................................B-13
Nipples ................................................................B-13
HP Series........................................................B-14–15
Couplers..............................................................B-15
Nipples ................................................................B-15
4000 Series.....................................................B-16–17
Couplers..............................................................B-17
Nipples ................................................................B-17
4200 Series......................................................B-18-19
Couplers..............................................................B-19
Nipples ................................................................B-19
Non-Spill Couplings
NS Series.........................................................B-20-21
Couplers..............................................................B-21
Nipples ................................................................B-21
Adapters................................................................B-22
FF Series .........................................................B-23-24
Couplers..............................................................B-24
Nipples ................................................................B-24
FE Series .........................................................B-25-26
Couplers..............................................................B-26
Nipples ................................................................B-26
FEM Series ......................................................B-27-28
Couplers..............................................................B-28
Nipples ................................................................B-28
FC Series ..............................................................B-29
Nipples ................................................................B-29
FEC Series............................................................B-30
Nipples ................................................................B-30
B-3
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Hydraulic Quick Couplings
Coupling Selection & Ordering Guide
Hydraulic Quick Couplings
B Hydraulics
Valving
Body
Size
Material*
Locking
Br S S3 S6 Mechanism
General Purpose
60 Series
Poppet
1/8 - 2 1/2" ● ● ● ●
60 Series Steam
Poppet
1/4 to 1"
●
6600 Series
Poppet
1/4 to 1"
●
SM Series
Poppet
1/4 to 3/4"
●
HP Series
Poppet
1 to 1 1/2"
●
4000 Series
Poppet/Ball
1/4 to 1"
●
4200 Series
Poppet/Ball
3/8 to 1/2"
●
Non-Spill
NS Series
Flush Face
3/8 to 1"
●
Adapter
Flush Face/Poppet
1/2"
●
FF Series
Flush Face
1/4 to 1"
●
FE Series
Flush Face
1/2 to 5/8"
●
FEM Series
Flush Face
1/4 to 1"
●
FS Series
Flush Face
1/4 to 1"
●
Non-Spill Connect Under Pressure
FC Series
Flush Face
3/8 to 3/4"
●
FEC Series
Flush Face
3/8 to 1"
●
6100 Series
Flush Face 3/4 to 1 1 /2" ●
Connect Under Pressure
8200 Series
Poppet
9200 Series
Poppet
5000 Series
Ball
High Pressure
FH Series
Flush Face
3000 Series
Ball
TC Series
Poppet
1141 Series
Poppet
Mold Coolant
Moldmate
High Flow
ST Series
HO Series
Water Service
Std. Seal
Material**
Temp
Range**
Rated
Pressure
Ball
Ball
Ball
Ball
Ball
Ball
Ball
Nitrile
Ethylene Propylene
Nitrile
Nitrile
Nitrile
Nitrile
Nitrile
-40° to +250° F
-65° to +400° F
-40° to +250° F
-40° to +250° F
-40° to +250° F
-40° to +250° F
-40° to +250° F
1000 to 5000 PSI
100 PSI
4000 to 5000 PSI
4500 to 6000 PSI
5000 PSI
3000 PSI
3000 PSI
Ball
Ball
Ball
Ball
Ball
Ball
Nitrile
Nitrile
Nitrile
Nitrile
Nitrile
Fluorocarbon
-40° to +250° F
-40° to +250° F
-40° to +250° F
-40° to +250° F
-40° to +250° F
-15° to +400° F
2500 PSI
3000 to 3625 PSI
3000 to 5000 PSI
3625 PSI
3000 to 5000 PSI
2000 PSI
Ball
Ball
Threads
Nitrile
Nitrile
Nitrile
-40° to +250° F
-40° to +250° F
-40° to +250° F
3000 PSI
3000 PSI
2000 to 3000 PSI
1/2"
1/2"
1/2"
●
●
●
Ball
Ball
Threads
Nitrile
Nitrile
Nitrile
-40° to +250° F
-40° to +250° F
-40° to +250° F
3000 PSI
3000 PSI
2500 PSI
3/8"
1/4 to 3/8"
3/8"
1/4"
●
●
●
Ball
Threads
Ball
Threads
Nitrile
Polyurethane
Fluorocarbon
Polyurethane
-40° to +250° F
-65° to +180° F
-15° to +400° F
-40° to +180° F
10,000 PSI
10,000 PSI
10,000 PSI
10,000 PSI
Ball
Silicone
-20° to +400° F
200 PSI
●
●
Valved & Unvalved
1/4 to 1/2"
Unvalved
1/8 to 1 1/2"
● ● ●
Ball
Nitrile
-40° to +250° F
2500 to 6700 PSI
Unvalved
Unvalved
1/4 to 1/2"
3/4"
●
●
Ball
Ball
Nitrile
Nitrile
-40° to +250° F
-40° to +250° F
10,000 to 15,000 PSI
200 PSI
●
Ball
Fluorocarbon
-15° to +400° F
250 PSI
Special Purpose - Miniature
DM Series
Poppet
1/8
See Fluid Compatibility chart and/or consult factory for questions regarding proper material for specific applications.
* Material Code: Br = Brass; S = Steel; S3 = 303 Stainless Steel; S6 = 316 Stainless Steel
**Optional Seals
W
Y
Z
E5
E4
E12
E47
Seal Material
Ethylene Propylene
Fluorocarbon
Neoprene
Ethylene Propylene
Fluorocarbon
Neoprene
Perfluoroelastomer
Specific Coupling Series Using Optional Seal Suffix Designator at left
60, 6600, 4000, 4200, 6100, 5000, 8200, 9200, ST
60, 6600, 4000, 4200, 6100, 5000, 8200, 9200, ST, Moldmate (if used wih oil based media only)
60, 6600, 4000, 4200, 6100, 5000, 8200, 9200, ST
SM, HP, NS, FF, FE, FEM, FH, FS, HO
SM, HP, NS, FF, FE, FEM, FH, FS (STD-no suffix needed), HO, TC (Fluorocarbon only-no suffix needed)
SM, HP, NS, FF, FE, FEM, FH, FS,HO
SM, HP, NS, FF, FE, FEM, FH, FS (Contact the division re: Perfluoroelastomer options)
3000 and 1141 with Polyurethane only (no suffix needed)
Water Service (Nitrile only)
To select proper Seal Materials, see Fluid Compatibility chart in Appendices, or contact your Parker Quick Coupling Distributor.
B-4
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
General Purpose Couplings
Hydraulic Quick Couplings
60 Series
Special Order Information
Standard seal material is Nitrile; optional seal materials are
available.
For 316 stainless steel products, standard seal material is
Fluorocarbon, and other seal materials are available upon
request. See Fluid Compatibility Chart at end of this catalog.
All sizes of 60 Series can be furnished with locking sleeves.
Place suffix letters “-SL” (Sleeve-Lok) after regular catalog
numbers. Example H3-62-SL. Parker 60 Series heavy duty
nipples are recommended where high cycle rates and
pressure surges are encountered. Machined from high tensile
steel and induction hardened, they are zinc plated with a
yellow chromate finish. To specify a heavy duty nipple, add
the prefix “HD” to the steel part number; thus: HD-H2-63.
Applications
Parker general purpose couplings, are used across the
spectrum of hydraulic applications. These Double Shut-Off
couplings can be found anywhere that fluid transfer lines
need to be connected and disconnected for operation or
maintenance of equipment, and a loss of fluid is undesirable.
Primarily used with hydraulic fluid, general purpose Double
Shut-Off couplings are also used with chemicals, water,
steam, and some gases.
Note
Protective dust plugs and caps play a crucial role in the life of
a quick coupling and no purchase of a hydraulic quick
coupling is complete without the selection of an appropriate
dust plug and cap. See pages noted in Table of Contents for
dust plugs and caps for the Parker full line of hydraulic
couplings.
Specifications
Industry Standard: Parker 60 Series couplings comply with ISO 7241 Series B Standard.
ANSI/ISO Pressure Rating: Dynamic applications with normal to moderate hydraulic
shocks such as general industrial equipment, hydraulic presses, agricultural equipment, etc. Impulse tested at a multiple (125% to 133%) of rated pressure.
Body Size (in.)
1/8
1/4
3/8
1/2
3/4
1
1 1/2
Low Cycle, Non-pulsating Pressure Rating: Applications with lower cycle
life and no severe cyclic pressure fluctuations, essentially steady pressure during
an operating cycle. Typical applications include hydraulic jacks, mine roof
support systems, and high pressure fluid transfer (pumping water or slurry in
oil wells). Minor pump ripple is considered non-pulsating. Impulse tested at rated
pressure.
2 1/2
1/8
1/4
3/8
Rated Pressure (PSI)
1/2
3/4
1
1 1/2
2 1/2
Rated Pressure (PSI)
Brass
1000
1000
1000
1000
1000
1000
800
800
3000
3700
2700
3500
2200
1500
1500
1200
Stainless steel
2000
2000
1500
1500
1500
1000
1000
1000
5000
5000
5000
5000
3000
3000
1500
1500
Steel
5000
5000
4000
4000
2500
2000
1000
1000
5000
5000
4000
4000
2500
2000
1500
1500
Steel w / HD
nipple
N/A
5000
4000
4000
3000
3000
N/A
N/A
5000
5000
4000
4000
3000
3000
N/A
N/A
-40°F to +250°F (Standard seal for Brass, Steel, & 303 Stainless Steel couplings.
Seal Temperature Range: Nitrile:
Fluorocarbon: -15°F to +400°F (Standard seal for 316 Stainless Steel couplings.
Other Seal materials: Contact the Division for availability.
Vacuum Data:
27.4 inches Hg. both connected and disconnected (1-1/2" and 2-1/2" body size 60 Series couplings are not recommended for service in disconnected mode)
Note: Read the Safety Guide for Selecting and Using Quick Action Couplings and Related Accessories before making a coupling selection. It may be found in Parker Hannifin Quick
Coupling Division catalogs and is available as Parker Publication No. 3800-B1.0.
Body Size (in.)
1/8
1/4
3/8
1/2
3/4
1
1 1/2
2 1/2
Rated Flow (GPM)
.8
3
6
12
28
50
100
200
B-5
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
60 Series couplings are available in zinc plated steel, brass,
303 stainless steel, and 316 stainless steel. Brass couplings
have double O-Ring seals and stainless locking balls.
General Purpose Couplings
Hydraulic Quick Couplings
60 Series
B Hydraulics
4
2
4. Hardened nipples and sleeves (steel) and solid barstock
construction make for a quality coupling with maximum resistance to damage from hydraulic and mechanical shock.
6
5. The seal is designed to withstand high pressures and provide reliable sealing. A wide selection of optional seal materials are available, see Fluid Compatibility Chart at end
of this catalog for selection assistance. Steel versions feature PTFE back-up rings that support mating seals for high
pressure applications. Brass couplers have a double Oring seal for redundancy in low pressure, vacuum and
steam applications.
8
1
3
1
5
6. Durable ball-locking mechanism assures reliable connection, every time. A large number of locking balls distributes
the work load evenly while providing alignment and swiveling action to reduce hose torque and prolong hose life.
2
7
7. Manufactured from brass, steel and stainless steel as
standard materials. A wide range of seals allow these
couplings to be used with a broad range of media.
Features
1. Large flow areas machined into the body of the coupler
and nipple facilitate flow around the valve, for a high flow
capacity.
8. Also available with a Straight Thread (ORB) end configuration available as standard.
2. Positive valve stop. The perch maintains valve alignment
and provides metal to metal valve stop to ensure that the
valves open fully, every time.
9. Industrial Standard: Parker 60 Series couplings comply
with ISO 7241, Series B Standard.
3. Captive valve seal assures “bubble tight” poppet sealing.
The valve seal is positively captured by the metal poppet to
minimize seal washout or damage from high velocity fluid.
Performance
60 Series (3/8" & 1/2")
Test Fluid: Oil - 150 SUS
60 Series (1/8" & 1/4")
Test Fluid: Oil - 150 SUS
40
Pressure Drop in PSID
30
35
Pressure Drop in PSID
25
20
1/8"
15
1/4"
10
5
30
3/8"
25
20
15
1/2"
10
5
0
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
0
2
4
6
60 Series (3/4" & 1")
Test Fluid: Oil - 150 SUS
10
12
14
16
18
60 Series (1-1/2" & 2-1/2")
Test Fluid: Oil - 200 SUS
45
140
40
120
35
Pressure Drop in PSID
Pressure Drop in PSID
8
Flow in USGPM
Flow in USGPM
3/4"
30
25
1"
20
15
10
100
80
2-1/2"
60
1-1/2"
40
20
5
0
0
0
10
20
30
40
50
60
70
0
50
100
150
200
250
Flow in USGPM
Flow in USGPM
B-6
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
300
General Purpose Couplings
Hydraulic Quick Couplings
60 Series
Couplers
A
Female Thread
B
Body
Size
(in.)
Part
No.
Brass
Wt. (LB.)
P/Piece
Part
No.
Steel
Wt. (LB.)
P/Piece
Part No.
Type 303
Stainless
Wt. (LB.)
P/Piece
Part No.
Type 316
Stainless
Wt. (LB.)
P/Piece
Thread
Size
NPTF
Thread
Size
ORB
1/8
1/8
1/4
1/4
3/8
3/8
1/2
1/2
3/4
3/4
1
1
BH1-60
–
BH2-60
–
BH3-60
–
BH4-60
–
BH6-60
–
BH8-60
–
0.16
–
0.32
–
0.43
–
0.80
–
–
–
–
–
H1-62
H1-62-T4
H2-62
H2-62-T6
H3-62
H3-62-T8
H4-62
H4-62-T10
H6-62
H6-62-T12
H8-62
H8-62-T16
0.16
0.18
0.30
0.31
0.40
0.51
0.73
0.78
1.30
1.39
1.95
1.95
SH1-62
SH1-62-T4
SH2-62
SH2-62-T6
SH3-62
SH3-62-T8
SH4-62
SH4-62-T10
SH6-62
SH6-62-T12
SH8-62
SH8-62-T16
0.16
0.10
0.30
0.31
0.40
0.51
0.75
0.75
1.31
1.34
1.95
1.95
SSH1-62Y
SSH1-62Y-T4
SSH2-62Y
SSH2-62Y-T6
SSH3-62Y
SSH3-62Y-T8
SSH4-62Y
SSH4-62Y-T10
SSH6-62Y
SSH6-62Y-T12
SSH8-62Y
SSH8-62Y-T16
0.15
0.17
0.30
0.31
0.40
0.51
0.76
0.78
1.33
1.40
1.95
1.95
1/8-27
–
1/4-18
–
3/8-18
–
1/2-14
–
3/4-14
–
1-11 1/2
–
–
7/16-20
–
9/16-18
–
3/4-16
–
7/8-14
–
1-1/16-12
–
1-5/16-12
Nipples
Dimensions (in.)
Overall Wrench Largest
Length Flats Diameter
A
1.90
2.06
2.26
2.41
2.49
2.75
2.87
3.05
3.56
3.56
4.18
4.18
B
0.68
0.68
0.81
0.81
0.88
1.00
1.12
1.12
1.31
1.31
1.62
1.62
C
0.96
0.96
1.14
1.14
1.40
1.40
1.77
1.77
2.14
2.14
2.52
2.52
D
E
Female Thread
G
F
Body
Size
(in.)
Part
No.
Brass
Wt. (LB.)
P/Piece
Part
No.
Steel
Wt. (LB.)
P/Piece
Part No.
Type 303
Stainless
Wt. (LB.)
P/Piece
Part No.
Type 316
Stainless
Wt. (LB.)
P/Piece
Thread
Size
NPTF
Thread
Size
ORB
1/8
1/8
1/4
1/4
3/8
3/8
1/2
1/2
3/4
3/4
1
1
BH1-61
–
BH2-61
–
BH3-61
–
BH4-61
–
BH6-61
–
BH8-61
–
0.04
0.06
0.09
0.11
0.10
0.12
0.25
0.28
0.50
0.55
0.76
0.80
H1-63
H1-63-T4
H2-63
H2-63-T6
H3-63
H3-63-T8
H4-63
H4-63-T10
H6-63
H6-63-T12
H8-63
H8-63-T16
0.03
0.05
0.08
0.10
0.12
0.16
0.24
0.27
0.46
0.46
0.76
0.80
SH1-63
SH1-63-T4
SH2-63
SH2-63-T6
SH3-63
SH3-63-T8
SH4-63
SH4-63-T10
SH6-63
SH6-63-T12
SH8-63
SH8-63-T16
0.03
–
0.08
0.10
0.12
0.16
0.24
0.27
0.45
0.50
0.76
0.80
SSH1-63Y
SSH1-63Y-T4
SSH2-63Y
SSH2-63Y-T6
SSH3-63Y
SSH3-63Y-T8
SSH4-63Y
SSH4-63Y-T10
SSH6-63Y
SSH6-63Y-T12
SSH8-63Y
SSH8-63Y-T16
0.04
0.06
0.08
0.10
0.12
0.14
0.24
0.27
0.46
0.50
0.76
0.80
1/8-27
–
1/4-18
–
3/8-18
–
1/2-14
–
3/4-14
–
1-11 1/2
–
–
7/16-20
–
9/16-18
–
3/4-16
–
7/8-14
–
1-1/16-12
–
1-5/16-12
Dimensions (in.)
Overall Exposed Wrench Largest
Length Length* Flats Diameter
D
E
F
G
1.26
1.41
1.54
1.69
1.68
1.94
1.94
2.12
2.43
2.54
2.91
2.91
0.44
0.59
0.55
0.70
0.54
0.80
0.69
0.87
0.79
0.90
0.99
0.99
0.56
0.69
0.75
0.88
0.88
1.00
1.12
1.19
1.38
1.34
1.62
1.62
0.65
0.79
0.87
1.01
1.01
1.15
1.30
1.37
1.59
1.59
1.88
1.88*
* This dimension represents the portion that is exposed when the nipple is inserted into the mating Parker Coupler.
Optional Seals
Optional Seals Suffix
W
Y
Z
60 Series
B-7
Ethylene Propylene (EPR)
Fluorocarbon
Neoprene
Perfluoroelastomer (Contact factory for Seal options)
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
C
General Purpose Couplings
Hydraulic Quick Couplings
60 Series
A
Couplers
Female Thread
C
B Hydraulics
B
Body
Size
(in.)
Part
No.
Brass
1 1/2
1 1/2
1 1/2
1 1/2
2 1/2
2 1/2
2 1/2
BH12-60L
BH12-60N
–
–
BH2016-60
BH2020-60
BH2024-60
Wt. (LB.)
P/Piece
Part
No.
Steel
Wt. (LB.)
P/Piece
Part No.
Type 303
Stainless
4.58
H12-62L
4.70
SH12-62L
4.58
H12-62N
4.70
SH12-62N
4.61 H12-62-T20 4.72 SH12-62-T20
4.61 H12-62-T24 4.72 SH12-62-T24
11.06 H2016-62 10.58 SH2016-62
11.42 H2020-62 10.91 SH2020-62
–
H2024-62
–
SH2024-62
Part No.
Type 316
Stainless
Wt. (LB.)
P/Piece
SSH12-62LY
SSH12-62NY
SSH12-62Y-T20
SSH12-62Y-T24
SSH2016-62Y
SSH2020-62Y
SSH2024-62Y
4.68
4.68
4.71
4.71
–
–
–
Wt. (LB.)
P/Piece
4.68
4.68
4.71
4.71
–
–
–
Thread
Size
NPTF
Thread
Size
ORB
Dimensions (in.)
Overall Wrench Largest
Length Flats Diameter
1 1/4-11 1/2
–
1 1/2-11 1/2
–
–
1 5/8-12
–
1 7/8-12
2-11 1/2
–
2 1/2-8
–
3-8
–
A
B
C
4.86
4.86
4.86
4.86
5.57
6.04
6.96
2.38‡
2.38‡
2.38‡
2.38‡
3.75
3.75
4.00
3.00
3.00
3.00
3.00
4.10
4.10
4.35
‡Wrench Flat on 303 Stainless is 2.50 in.
D
Nipples
E
Female Thread
G
F
Body
Size
(in.)
Part
No.
Brass
1 1/2
1 1/2
1 1/2
1 1/2
2 1/2
2 1/2
2 1/2
BH12-61L
BH12-61N
–
–
BH2016-61
BH2020-61
BH2024-61
Wt. (LB.)
P/Piece
Part
No.
Steel
Wt. (LB.)
P/Piece
Part No.
Type 303
Stainless
Wt. (LB.)
P/Piece
Part No.
Type 316
Stainless
Wt. (LB.)
P/Piece
2.96 H12-63L 3.10
SH12-63L 3.06
SSH12-63LY
2.96 H12-63N 3.10 SH12-63N 3.06 SSH12-63NY
– H12-63-T20 3.15 SH12-63-T20 3.14 SSH12-63Y-T20
– H12-63-T24 3.15 SH12-63-T24 3.14 SSH12-63Y-T24
7.78 H2016-63 7.90 SH2016-63 7.92 SSH2016-63Y
8.12 H2020-63 8.16 SH2020-63 8.16 SSH2020-63Y
–
H2024-63
–
SH2024-63
–
SSH2024-63Y
–
–
–
–
–
–
–
Thread
Size
NPTF
Thread
Size
ORB
1 1/4-11 1/2
–
1 1/2-11 1/2
–
–
1 5/8-12
–
1 7/8-12
2-11 1/2
–
2 1/2-8
–
3-8
–
Dimensions (in.)
Overall Exposed Wrench Largest
Length Length* Flats Diameter
D
4.76
4.76
4.76
4.76
5.48
5.95
6.87
E
2.69
2.69
2.69
2.69
2.90
3.37
4.29
F
G
2.38‡ 2.75†
2.38‡ 2.75†
2.38‡ 2.75†
2.38‡ 2.75†
3.75 4.10
3.75 4.10
4.00 4.35
* This dimension represents the portion that is exposed when the nipple is inserted into the mating Parker Coupler.
† Largest diameter on Brass is 2.96" across Hex Corners
‡ Hex on 303 Stainless is 2.50 in.
Replacement Parts
Repair Kits
60 Series Couplers
Couplers
Body Size (in.)
O-Rings - Nitrile
Back-Up Rings
1/8
1/4
3/8
1/2
3/4
1
1-1/2
50001-013-0010
50001-015-0010
50001-116-0010
50001-213-0010
50001-218-0010
50001-222-0010
50001-124-0010
H67A-28
H67C-28
4118007
4128002
4148001
4158001
50001-138-0260
(Valve)
(Fitting)
50001-224-0010
(Body 2 req.)
2-1/2
50001-133-0010
(Valve)
Nipples
Body
Repair Kit
Size (in.) Part No.
3/8
H67E-62K
BH67E-60K
SH67E-62K
SSH67-62KY
1/2
H67F-62K
BH67F-60K
SH67F-62K
SSH67F-62KY
3/4
H67G-62K
BH67G-60K
SH67G-62K
SSH67G-62KY
1
H67J-62K
BH67J-60K
SH67J-62K
SSH67J-62KY
50001-234-0260
(Fitting)
50001-333-0010
(Body)
B-8
Used For
Part No.
H3-62
BH3-60
SH3-62
SSH3-62Y
H4-62
BH4-60
SH4-62
SSH4-62Y
H6-62
BH6-60
SH6-62
SSH6-62Y
H8-62
BH8-60
SH8-62
SSH8-62Y
Repair Kit
Part No.
H67E-63K
BH67E-61K
SH67E-63K
SSH67E-63KY
H67F-63K
BH67F-61K
SH67F-63K
SSH67F-63KY
H67G-63K
BH67G-61K
SH67G-63K
SSH67G-63KY
H67J-63K
BH67J-61K
SH67J-63K
SSH67J-63KY
Used For
Part No.
H3-63
BH3-61
SH3-63
SSH3-63Y
H4-63
BH4-61
SH4-63
SSH4-63Y
H6-63
BH6-61
SH6-63
SSH6-63Y
H8-63
BH8-61
SH8-63
SSH8-63Y
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
General Purpose Couplings
Hydraulic Quick Couplings
60 Series Steam Couplings
Body Size (in.)
Standard Seal Material
Temperature Range
1/4 to 1
Ethylene Propylene
up to +400°
Coupler
Female Pipe Thread
Body
Size
(in.)
Part
No.
Brass
Thread
Size
NPTF
Dimension (in.)
Overall
Wrench
Largest
Length
Flats
Diameter
A
B
C
1/4
BH2-60-STM
1/4-18
2.26
0.81
1.14
3/8*
H3-68
3/8-18
2.50
0.88
1.77
1/2
BH4-60-STM
1/2-14
2.87
1.12
1.77
3/4
BH6-60-STM
3/4-14
3.56
1.31
2.14
1
BH8-60-STM
1-11 1/2
4.18
1.62
2.52
* See Photo and Drawing below for 3/8 inch size coupler configuration.
A
Wt. (LB.)
P/Piece
0.30
0.50
0.75
1.31
1.95
C
B
A
Coupler - 3/8 Inch
Configuration
C
Female Pipe Thread
B
Nipple
Female Pipe Thread
D
E
Body
Size
(in.)
Part
No.
Brass
Thread
Size
NPTF
Overall
Length
1/4
3/8
1/2
3/4
1
BH2-61-STM
H3-69
BH4-61-STM
BH6-61-STM
BH8-61-STM
1/4-18
3/8-18
1/2-14
3/4-14
1-11 1/2
D
1.54
1.68
1.94
2.43
2.91
Dimension (in.)
Exposed*
Hex
Length
Size
E
0.65
0.52
0.69
0.79
0.99
F
0.75
0.88
1.12
1.38
1.62
Largest
Diameter
Wt. (LB.)
P/Piece
G
0.87
1.01
1.30
1.59
1.88
0.08
0.13
0.24
0.46
0.76
G
* This dimension represents the portion that is exposed when the nipple is
inserted into the mating Parker Coupler.
F
Repair Kits
Steam Coupling
Body
Size
Repair Kit
Part No.
Used For
Part No.
3/8
3/8
H68E-67K
H69E-67K
H3-68
H3-69
B-9
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Specifications
General Purpose Couplings
Hydraulic Quick Couplings
6600 Series
Performance
6600 Series (1/4")
Test Fluid: Oil - 150 SUS
B Hydraulics
25
Pressure Drop in PSID
20
15
1/4"
10
5
Features
0
• Poppet valves are mated with a solid metal perch that
maintains valve alignment and prevents flow checking.
0
0.2
0.4
0.6
0.8
1
1.2
Flow in USGPM
• Both the coupler's sleeve and the nipple's body are
hardened to make the 6600 Series couplings resistant to
damage from brinelling and mechanical shock.
6600 Series (3/8"& 1/2")
Test Fluid: Oil - 150 SUS
• The durable-ball-locking mechanism ensures a reliable
connection every time.
45
• 6600 Series couplings have female pipe and straight thread
end configurations as standard.
Applications
Versatile Parker 6600 Series couplings are used in a
wide range of hydraulic applications including construction
equipment, manufacturing machinery, and in-plant systems.
They can be found anywhere the fluid transfer lines need to
be connected and disconnected for operation or maintenance
of equipment. Rugged construction makes the 6600 Series a
good choice for mobile applications including dump trucks,
snow plows, refuse hauling, mining, asphalt paving, truck
trailer connections and many more. In-plant machinery
applications include hydraulic fluid, chemicals and gas
lines for paper mills, steel production, and many varieties
of plant maintenance and production equipment.
35
Pressure Drop in PSID
• Parker 6600 Series couplings interchange with couplings
meeting ISO 7241-1, Series A.
40
30
1/2"
25
3/8"
20
15
10
5
0
0
2
4
6
8
10
12
14
16
18
Flow in USGPM
6600 Series (3/4" & 1")
Test Fluid: Oil - 150 SUS
50
Note: Protective dust plugs and caps play a crucial role
in the life of a quick coupling and no purchase of a hydraulic
quick coupling is complete without the selection of an
appropriate dust plug and cap. See pages noted in Table
of Contents for dust plugs and caps for the Parker full
line of hydraulic couplings.
45
Pressure Drop in PSID
40
Specifications
Body Size (in.)
Rated Pressure (PSI)
1/4
3/8
1/2
3/4
1
5000
4000
4000
4000
4000
Rated Flow (GPM)
0.8
Temperature Range (Nitrile seals)
6
12
28
-40˚ to +250˚F
35
1"
30
3/4"
25
20
15
10
5
50
0
0
10
20
30
40
50
60
70
Flow in USGPM
B-10
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
General Purpose Couplings
Hydraulic Quick Couplings
Female Thread
A
C
B
Nipples
Female Thread
D
E
G
F
Body
Size
(in.)
Part
No.
Steel
Thread
Size
NPTF
Thread
Size
ORB
1/4
1/4
3/8
3/8
1/2
1/2
1/2
1/2
1/2
3/4
3/4
1
1
6601-2-4
6601-4-4
6601-6-6
6608-6-6
6601-8-10
6601-12-10
6608-8-10
6608-10-10
6608-12-10
6601-12-12
6608-12-12
6601-16-16
6608-16-16
1/8-27
1/4-18
3/8-18
—
1/2-14
3/4-14
—
—
—
3/4-14
—
1-11 1/2
—
—
—
—
9/16-18
—
—
3/4-16
7/8-14
1 1/16-12
—
1 1/16-12
—
1 5/16-12
Dimensions (in.)
Overall
Hex
Largest
Length
Size
Diameter
A
1.85
1.85
2.18
2.18
2.75
2.88
2.74
2.79
3.01
3.36
3.35
4.11
4.11
B
.88
.88
1.06
1.06
1.25
1.38
1.25
1.25
1.38
1.62
1.62
1.88
1.88
C
1.08
1.08
1.27
1.27
1.52
1.52
1.52
1.52
1.52
1.90
1.90
2.14
2.14
Dimensions (in.)
Exposed*
Hex
Largest
Length
Size Diameter
Wt. (LB.)
P/Piece
0.27
0.26
0.39
0.38
0.67
0.71
0.67
0.64
0.77
1.31
1.31
0.73
1.73
Body
Size
(in.)
Part
No.
Steel
Thread
Size
NPTF
Thread
Size
ORB
Overall
Length
1/4
1/4
3/8
3/8
6602-2-4
6602-4-4
6602-6-6
6610-6-6
1/8-27
1/4-18
3/8-18
—
—
—
—
9/16-18
D
1.41
1.41
1.63
1.63
E
.50
.58
.72
.72
F
.56
.75
.88
.88
G
.65
.87
1.01
1.01
0.05
0.07
0.11
0.13
1/2
1/2
1/2
1/2
1/2
3/4
3/4
1
1
6602-8-10
6602-12-10
6610-8-10
6610-10-10
6610-12-10
6602-12-12
6610-12-12
6602-16-16
6610-16-16
1/2-14
3/4-14
—
—
—
3/4-14
—
1-11 1/2
—
—
—
3/4-16
7/8-14
1 1/16-12
—
1 1/16-12
—
1 5/16-12
2.08
2.30
2.08
2.08
2.30
2.55
2.55
3.10
3.10
.78
.78
.76
.82
1.04
1.18
1.18
1.34
1.34
1.06
1.38
1.06
1.12
1.38
1.38
1.38
1.62
1.62
1.23
1.59
1.23
1.30
1.59
1.59
1.59
1.88
2.17
0.21
0.33
0.22
0.21
0.33
0.49
0.47
0.75
0.72
Wt. (LB.)
P/Piece
* This dimension represents the portion that is exposed when the nipple is inserted into the mating parker Coupler.
Replacement Parts
Body Size (in.)
6600 Series
O-Rings - Nitrile
Back-up Rings
1/4
3/8
1/2
3/4
1
50001-112-0010 50001-115-0010 50001-211-0010 50001-123-0010 50001-126-0010
4118006
4118005
50-140-4
4138001
4148002
B-11
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Couplers
6600 Series
General Purpose Couplings
Hydraulic Quick Couplings
SM Series
Features
The SM Series couplings feature:
B Hydraulics
• Poppet valves with captive valve seals: the valve seal is
positively captured by the metal poppet to minimize seal
washout.
• Coupler and nipple are precision machined from solid
barstock.
• SM Series are available in female pipe (NPTF), SAE
O-Ring Boss and British Pipe (BSPP) as standard.
Applications
SM Series couplings are used across the spectrum of
hydraulic applications. These Double Shut-Off couplings can
be found anywhere that fluid transfer lines need to be
connected and disconnected for operation or maintenance of
equipment, and a loss of fluid is undesirable. Designed for
use with commercial grades of hydraulic fluids. These
couplings are ideally suited for all mobile or industrial
applications.
Specifications
Body Size (in.)
1/4
Rated Pressure (PSI)
6,000
Rated Flow (GPM)
3
Temperature Range (Nitrile Seals)
1/2
3/4
6,000
4,500
12
28
-40° to +250°F
Note: Protective dust plugs and caps play a crucial role in the
life of a quick coupling and no purchase of a hydraulic quick
coupling is complete without the selection of an appropriate
dust plug and cap. See pages noted in Table of Contents for
dust plugs and caps for the Parker full line of hydraulic
couplings.
Performance
SM Series (1/4")
Test Fluid: Oil - 200 SUS
SM Series (1/2" & 3/4")
Test Fluid: Oil - 200 SUS
35
25
30
25
Pressure Drop in PSID
Pressure Drop in PSID
20
15
1/4"
10
20
1/2"
15
3/4"
10
5
5
0
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
0
Flow in USGPM
5
10
15
20
25
30
35
40
Flow in USGPM
B-12
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
General Purpose Couplings
Hydraulic Quick Couplings
Female Thread
C
B
A
Nipples
Female Thread
G
F
E
D
Body
Size
(in.)
Part
No.
Steel
Thread
Size
1/4
1/4
1/4
1/4
1/4
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
SM-251-4FP
SM-251-4FB
SM-251-6FP
SM-251-6FB
SM-251-6FO
SM-501-8FP
SM-501-8FB
SM-501-12FP
SM-501-12FB
SM-501-8FO
SM-751-12FO
SM-751-12FP
SM-751-12FB
SM-751-16FP
SM-751-16FB
SM-751-16FO
1/4-18 NPTF
G1/4 BSPP
3/8-18 NPTF
G3/8 BSPP
9/16-18ORB
1/2-14 NPTF
G1/2 BSPP
3/4-14 NPTF
G3/4 BSPP
3/4-16ORB
1 1/16-12ORB
3/4-14 NPTF
G3/4 BSPP
1-11 1/2 NPTF
G 1 BSPP
1-5/16-12ORB
Dimensions (in.)
Overall
Hex
Largest
Length
Size
Diameter
A
1.89
2.04
2.04
2.04
2.04
2.81
2.95
2.99
3.16
2.95
3.62
3.62
3.76
3.90
3.90
3.90
Body
Size
(in.)
Part
No.
Steel
Thread
Size
Overall
Length
1/4
1/4
1/4
1/4
1/4
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
SM-252-4FP
SM-252-4FB
SM-252-6FP
SM-252-6FB
SM-252-6FO
SM-502-8FO
SM-502-8FP
SM-502-8FB
SM-502-12FP
SM-502-12FB
SM-752-12FO
SM-752-12FP
SM-752-12FB
SM-752-16FP
SM-752-16FB
SM-752-16FO
1/4-18 NPTF
G1/4 BSPP
3/8-18 NPTF
G3/8 BSPP
9/16-18ORB
3/4-16ORB
1/2-14 NPTF
G1/2 BSPP
3/4-14 NPTF
G3/4 BSPP
1 1/16-12ORB
3/4-14 NPTF
G3/4 BSPP
1-11 1/2 NPTF
G 1 BSPP
1-5/16-12ORB
D
1.29
1.44
1.60
1.60
1.44
2.27
1.81
1.96
2.27
2.44
2.33
2.33
2.79
2.61
2.61
2.61
B
0.75
0.75
0.94
0.94
0.75
1.25
1.25
1.37
1.37
1.25
1.62
1.62
1.62
1.62
1.62
1.62
C
1.06
1.06
1.06
1.06
1.06
1.56
1.56
1.56
1.56
1.56
2.25
2.22
2.22
2.22
2.22
2.22
Dimensions (in.)
Exposed*
Hex
Length
Size
E
0.50
0.65
0.81
0.81
0.55
0.72
0.45
0.60
0.90
1.07
0.39
0.39
0.53
0.67
0.67
0.67
F
0.75
0.75
0.94
0.94
0.75
1.06
1.06
1.06
1.37
1.37
1.50
1.50
1.50
1.62
1.62
1.62
Wt. (LB.)
P/Piece
0.24
0.26
0.28
0.26
0.25
0.70
0.74
0.81
0.85
0.70
1.78
1.83
1.88
1.84
1.89
1.89
Largest
Diameter
Wt. (LB.)
P/Piece
G
0.87
0.87
1.08
1.08
0.87
1.23
1.23
1.23
1.59
1.59
1.73
1.73
1.73
1.88
1.88
1.88
0.08
0.09
0.14
0.14
0.08
0.16
0.15
0.18
0.30
0.34
0.48
0.52
0.56
0.56
0.68
0.68
* This dimension represents the portion that is exposed when the nipple is inserted into the mating parker Coupler.
Optional Seals
Optional Seals Suffix (Standard seals are Nitrile)
E4
E5
E12
B-13
Fluorocarbon
Ethylene Propylene (EPR)
Neoprene
Perfluoroelastomer (Contact Factory for Seal Options)
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Couplers
SM Series
General Purpose Couplings
Hydraulic Quick Couplings
HP Series (High Pressure Coupling)
Features
• Operating pressures up to 5,000 PSI (350 Bar).
B Hydraulics
• Soft seat valving prevents leakage when coupler and nipple
are disconnected.
• Made of Carbon Steel. Exterior zinc plated with yellow
chromate finish for corrosion resistance.
• Smooth Flow Path Minimizes Pressure Drop.
• Nitrile Body Seal supported by PTFE washer. Backup
washer keeps seal from extruding at high pressures.
• Heat Treated Nipple and Heavy Duty Locking Collar
withstands high pressure surges, hose twist and repeated
pressure pulses.
• Nitrile Seals for General Purpose Hydraulic Applications.
Specifications
HP Series (1" & 1-1/2")
Test Fluid: Oil - 200 SUS
1-1/2
5,000
100
45
40
35
Pressure Drop in PSID
Body Size (in.)
1
Rated Pressure (PSI)
5,000
Rated Flow (GPM)
50
Temperature Range (std seals) -40° to +250°F
Performance
30
1-1/2"
25
1"
20
15
10
5
0
0
20
40
60
80
100
120
140
Flow in USGPM
B-14
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
General Purpose Couplings
Hydraulic Quick Couplings
HP Series (High Pressure Coupling)
A
Body
Size (in.)
Part
No.
Thread
Size
Overall
Length
Wrench
Flats
Largest
Diameter
Wt. (LB.)
P/Piec
1
1
1 1/2
1 1/2
HP-1001-16FP
HP-1001-16FO
HP-1501-24FP
HP-1501-24FO
1 -11 1/2 NPSF
1 5/16 -12 ORB
1 1/2-11 1/2 NPTF
1 7/8 -12 ORB
A
3.95
4.35
4.93
4.93
B
1.62
1.62
2.25
2.25
C
2.38
2.38
3.00
3.00
2.10
2.10
4.40
4.40
C
B
Nipples
D
Body
Size (in.)
Part
No.
Thread
Size
Overall
Length
Wrench
Flats
Largest Exposed Wt. (LB.)
Diameter Length* P/Piece
1
HP-1002-16FP
1 11-1/2 NPSF
D
3.00
E
1.62
F
1.88
G
1.32
0.84
1
1 1/2
1 1/2
HP-1002-16FO
HP-1502-24FP
HP-1502-24FO
1 15/16-12ORB
1 1/2-11 1/2 NPTF
1 7/8-12 ORB
3.40
4.06
4.06
1.62
2.25
225
1.88
2.63
2.63
1.72
.99
.99
0.84
1.85
1.85
G
* This dimension represents the portion that is exposed when the nipple is inserted into the mating Parker Coupler.
F
E
Dust Plugs and Caps
Protective Plugs for Coupler
P/N
HPP–100
HPP–150
Material
Aluminum
Aluminum
Fits Coupler
HP–1001
HP–1501
B-15
Protective Caps for Nipple
P/N
HPC–100
HPC–150
Material
Aluminum
Aluminum
Fits Nipple
HP-1002
HP-1502
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Couplers
General Purpose Couplings
Hydraulic Quick Couplings
4000 Series
Features
B Hydraulics
Parker 4000 Series couplings feature:
•
Poppet valves available to prevent uncoupled leakage.
•
Ball valves available for rugged dependability in heavyduty hydraulic applications, within rated working pressures.
•
Critical parts are induction hardened for durability.
•
Dependable ball-locking mechanism holds the mating
halves together.
•
Couplers and nipple are precision machined from solid bar
stock.
•
For applications with residual trapped pressure use
connect-under-pressure nipples designated by the -DC
option.
Performance
4000 Series (1/4", 3/8", 1/2")
Test Fluid: Oil - 200 SUS
70
60
Pressure Drop in PSID
Applications
The 4000 Series brings to the industry a proven design for
use on construction equipment, forestry equipment,
agricultural machinery, oil tools, steel mill machinery, and
other demanding hydraulic applications.
Note: Protective dust plugs and caps play a crucial role in the
life of a quick coupling and no purchase of a hydraulic quick
coupling is complete without the selection of an appropriate
dust plug and cap. See pages noted in Table of Contents for
dust plugs and caps for the Parker full line of hydraulic
couplings.
50
1/2"
1/4"
40
3/8"
30
20
10
0
0
2
4
6
8
10
12
14
16
18
Flow in USGPM
Special Order Information
4000 Series (3/4" & 1")
Test Fluid: Oil - 200 SUS
Standard seal material is Nitrile, other seal options are
available. See Ordering Information at end of Section B and
Fluid Compatibility Chart at end of this catalog for assistance
in making seal selection.
90
80
Specifications
Body Size (in.)
1/4
Rated Pressure (PSI)
3000
Rated Flow (GPM)
3
Temperature Range (std seals)
3/8
1/2
3/4
3000 3000 3000
6
12
28
-40° to +250°F
1
3000
50
Pressure Drop in PSID
70
Note: The part numbers for the 4000 Series Poppet Valve
design are designated with a -P. For example 4050-4P.
3/4"
60
50
1"
40
30
20
10
0
0
10
20
30
40
50
60
70
Flow in USGPM
B-16
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
General Purpose Couplings
Hydraulic Quick Couplings
Female Thread
A
C
B
Body
Size
(in.)
Part
No.
Steel*
1/4
1/4
1/4
1/4
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3/4
1
4050-2P
4050-2P-T8M
4050-T6
4050P-T6**
4050-3P
4050-4
4050-4P
4050-5
4050-5P
4050-15
4050-15P
4050-16
4050-16P
4050-29BSPP
4150-5
4050-6P
Thread
Size
NPTF
Thread
Size
ORB
Thread
Size
BSPP
1/4-18
–
–
3/4-16 (Male)
–
9/16-18
–
9/16-18
3/8-18
–
1/2-14
–
1/2-14
–
3/4-14
–
3/4-14
–
–
3/4-16
–
3/4-16
–
7/8-14
–
7/8-14
–
–
1/2-14
3/4-14
–
1-11 1/2
–
Overall
Length
A
2.18
1.80
2.18
2.43
2.31
2.60
2.60
2.69
2.69
2.81
2.81
2.75
2.75
2.68
3.50
3.84
Dimensions (in.)
Wrench
Largest
Flats
Diameter
B
0.88
0.88
0.88
0.81
0.94
1.06
1.06
1.13
1.13
1.06
1.06
1.06
1.06
1.06
1.38
1.63
C
1.06
1.06
1.06
1.33
1.33
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.90
2.08
Wt. (LB.)
P/Piece
0.24
0.21
0.27
0.33
0.51
0.58
0.58
0.71
0.71
0.64
0.64
0.59
0.59
0.59
1.00
1.89
* P in part number designates Poppet design
** Push-to-Connect design.
Nipples
Female Thread
D
E
G
F
Connect-Under-Pressure
D
E
Body
Size
(in.)
Part
No.
Steel*
Thread
Size
NPTF
Thread
Size
ORB
1/4
1/4
4010-2P
4010-T6
1/4-18
–
–
9/16-18
D
1.39
1.49
E
0.71
0.81
F
0.75
0.75
G
0.87
0.87
0.08
0.09
3/8
1/2
1/2
1/2
1/2
1/2
4010-3P
8010-4
8010-4P
8010-5
8010-5P
8010-15
3/8-18
1/2-14
1/2-14
3/4-14
3/4-14
–
–
–
–
–
–
3/4-16
1.50
1.95
1.95
2.14
2.14
2.06
.80
1.09
1.09
1.28
1.28
1.20
.94
1.06
1.06
1.25
1.25
1.06
1.08
1.23
1.23
1.44
1.44
1.23
0.16
0.20
0.20
0.25
0.25
0.20
1/2
1/2
1/2
1/2
3/4
1
8010-15P
8010-16
8010-16P
8010-29BSPP
4110-5
4010-6P
–
–
–
3/4-16
7/8-14
7/8-14
–
–
–
2.06
2.05
2.05
1.95
1.81
2.79
1.20
1.18
1.18
1.09
1.23
1.49
1.06
1.06
1.06
1.06
1.31
1.63
1.23
1.23
1.23
1.18
1.52
1.88
0.20
0.25
0.25
0.25
0.50
0.62
3/4-14
1-11 1/2
Thread
Size
BSPP
1/2-14
Dimensions (in.)
Overall Exposed Hex
Largest Wt. (LB.)
Length Length† Size Diameter P/Piece
* P in part number designates Poppet design
† This dimension represents the portion that is exposed when the nipple is inserted into the mating Parker Coupler.
Body
Size
(in.)
Part
No.
Steel*
Thread
Size
NPTF
Thread
Size
ORB
Thread
Size
BSPP
1/2
1/2
8010-4P-DC
8010-15P-DC
1/2-14
–
–
3/4-16
–
–
Dimensions (in.)
Overall Exposed Hex
Largest Wt. (LB.)
Length Length† Size Diameter P/Piece
D
1.81
1.81
E
1.09
1.09
F
1.06
1.06
G
1.16
1.16
0.20
0.20
G
F
Replacement Parts - 4000 Series
Body Size (in.)
O-Rings - Nitrile
1/4
50001-113-0260
3/8
50001-116-0260
B-17
1/2
50001-211-0260
3/4
50001-215-0010
1
50001-218-0260
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Couplers
4000 Series
General Purpose Couplings
Hydraulic Quick Couplings
4200 Series
Features
Parker 4200 Series couplings feature:
B Hydraulics
• Double acting sleeve for one handed push-to-connect
operation when coupler is clamp or bulkhead mounted.
• Poppet valves available to prevent uncoupled leakage.
• Ball valves available for rugged dependability in heavy-duty
hydraulic applications, within rated working pressures.
• Critical parts are induction hardened for durability.
• Dependable ball-locking mechanism holds the mating
halves together.
• Couplers and nipple are precision machined
from solid bar stock.
• For applications with residual trapped pressure use
connect-under-pressure nipples designated by the -DC
option.
Applications
Specifications
The 4200 Series brings to the industry a proven design
for use on construction equipment, forestry equipment
agricultural machinery, and oil tools.
Note: Protective dust plugs and caps play a crucial role in the
life of a quick coupling and no purchase of a hydraulic quick
coupling is complete without the selection of an appropriate
dust plug and cap. See pages noted in Table of Contents for
dust plugs and caps for the Parker full line of hydraulic
couplings.
Body Size (in.)
Rated Pressure (PSI)
Rated Flow (GPM)
3/8
3000
6
Temperature Range (std seals)
1/2
3000
12
-40° to +250°F
Performance
4200 Series (3/8" & 1/2")
Test Fluid: Oil - 200 SUS
80
70
Special Order Information
Note: The part numbers for the 4200 Series Poppet Valve
design are designated with a -P. For example 4250-4P.
Pressure Drop in PSID
Standard seal material is Nitrile. For other seal options see
Table of Contents. See Ordering Information at end of
Section B and Fluid Compatibility Chart at end of this catalog
for assistance in making seal selection.
60
50
1/2"
40
3/8"
30
20
10
0
0
2
4
6
8
10
12
14
16
18
Flow in USGPM
B-18
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
General Purpose Couplings
Hydraulic Quick Couplings
4200 Series
Couplers
A
Body
Size
(in.)
Part
No.
Steel*
Thread
Size
NPTF
Thread
Size
ORB
Overall
Length
3/8
1/2
1/2
1/2
1/2
4250-3P
4250-4
4250-4P
4250-15
4250-15P
3/8-18
1/2-14
1/2-14
–
–
–
–
–
3/4-16
3/4-16
A
2.31
2.68
2.68
2.68
2.68
Dimensions (in.)
Wrench
Largest
Flats
Diameter
B
0.81
0.94
0.94
0.94
0.94
C
1.31
1.50
1.50
1.50
1.50
Wt. (LB.)
P/Piece
0.39
0.55
0.55
0.55
0.55
* P in part number designates Poppet design
C
B
Nipples
Female Thread
D
E
G
Body
Size
(in.)
Part
No.
Steel*
Thread
Size
NPTF
Thread
Size
ORB
Overall
Length
3/8
1/2
1/2
1/2
1/2
4010-3P
8010-4
8010-4P
8010-15
8010-15P
3/8-18
1/2-14
1/2-14
–
–
–
–
–
3/4-16
3/4-16
D
1.60
1.95
1.95
2.06
2.06
Dimensions (in.)
Exposed
Hex
Largest
Length**
Size Diameter
E
0.80
1.09
1.09
1.20
1.20
F
0.94
1.06
1.06
1.06
1.06
G
1.08
1.23
1.23
1.23
1.23
Wt. (LB.)
P/Piece
0.16
0.20
0.20
0.20
0.20
* P in part number designates Poppet design
** This dimension represents the portion that is exposed when the nipple is inserted into the mating Parker Coupler.
F
Connect-Under-Pressure
D
E
G
Body
Size
(in.)
Part
No.
Steel*
Thread
Size
NPTF
Thread
Size
ORB
Thread
Size
BSPP
1/2
1/2
8010-4P-DC
8010-15P-DC
1/2-14
–
–
3/4-16
–
–
Dimensions (in.)
Overall Exposed Hex
Largest Wt. (LB.)
Length Length** Size Diameter P/Piece
D
1.81
1.81
E
1.09
1.09
F
1.06
1.06
G
1.16
1.16
0.20
0.20
** This dimension represents the portion that is exposed when the nipple is inserted into the mating Parker Coupler.
F
Replacement Parts - 4200 Series
Body Size (in.)
Part Number
Description
Material
1/2
3/8
50001-211-0260
50001-116-0260
O-Rings
O-Rings
Nitrile
Nitrile
B-19
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Female Thread
Non-Spill Couplings
Hydraulic Quick Couplings
NS Series
5
8
7
B Hydraulics
6
4
2
3
1
Applications
Features
Non-Spill couplings by Parker are widely used in the public
utility market where hydraulic oil spillage can constitute a
serious safety hazard, particularly in overhead bucket hoists
that are used for maintenance of high-voltage power
transmission lines. These couplings are also used for quick
change of hydraulic hand tools in the construction, railway
maintenance and mining industries. They are also ideal for inplant use where excess oil spillage can create a hazard.
1. Positive valve stop. The perch maintains valve alignment
and provides metal to metal valve stop to ensure that the
valves open fully, every time.
3. Steel construction, zinc plated with yellow chromate finish.
Hardened nipples and sleeves and solid barstock
construction for maximum resistance to damage from
hydraulic and mechanical shock.
Note: See pages noted in Table of Contents for dust plugs
and caps for the Parker full line of hydraulic couplings.
Performance
4. The seal is designed to withstand high pressures and
provide reliable sealing. 1/2" and above sizes feature
PTFE back-up rings that support mating seals for high
pressure applications.
NS Series (3/8"& 1/2")
Test Fluid: Oil - 200 SUS
50
45
5. Durable ball-locking assure reliable connection, every
time. A large number of locking balls distribute the work
load evenly while providing alignment and swiveling action
to reduce hose torque and prolong hose life.
Pressure Drop in PSID
40
35
30
25
1/2"
CAUTION: these products are not to be used as swivels,
rotation under pressure will result in excessive and
premature wear.
20
3/8"
15
10
6. Female pipe (NPSF), SAE O-Ring Boss and British pipe
(BSPF) are available as standard.
5
0
0
2
4
6
8
10
12
14
16
18
Flow in USGPM
NS Series (3/4" & 1")
Test Fluid: Oil - 200 SUS
7. Dry-Disconnect Series couplings employ flush valving
when connecting or disconnecting. This means that the
valves are mated together so that only small amounts of
fluid can be lost during disconnection or air included during
reconnection.
8. Sleeve locking mechanism prevents accidental
disconnection when the coupling is dragged along the
ground. Sleeve is rotated to engage the lock. The sleevelock feature is standard on this product.
25
20
Pressure Drop in PSID
2. Captive valve seal assures “bubble tight” poppet sealing.
The valve seal is positively captured by the metal poppet
to minimize seal washout or damage from high velocity
fluid.
Specifications
1"
15
3/8
Body Size (in.)
Rated Pressure (PSI)
2500
10
Rated Flow (GPM)
Temperature Range (std seals)
Spillage (ML)
0.020
3/4"
10
5
1/2
3/4
1
2500
2500
12
30
-40° to +250°F
2500
50
0.070
0.150
0.220
0.020
0.050
0.070
(max. per disconnect)
0
0
10
20
30
40
50
60
Air Incl. (ML)
70
0.010
(max. per disconnect)
Flow in USGPM
B-20
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Non-Spill Couplings
Hydraulic Quick Couplings
Body
Size
(in.)
C
B
A
Nipples
G
F
E
D
Part
No.
Steel
Thread
Size
Overall
Length
Dimensions (in.)
Hex
Largest
Size
Diameter
A
B
C
3/8
NS-371-6FP
3/8-18 NPSF
2.10
1.06
1.13
3/8
NS-371-6FB
G3/8 BSPP
2.10
1.06
1.13
3/8
NS-371-8FO
3/4-16UNF
2.20
1.06
1.13
1/2
NS-501-8FP
1/2-14 NPSF
2.88
1.25
1.56
1/2
NS-501-8FB
G1/2 BSPP
2.95
1.25
1.56
1/2
NS-501-10FO*
7/8-14UNF
2.97
1.25
1.56
3/4
NS-751-12FP
3/4-14 NPSF
3.19
1.56
1.96
3/4
NS-751-12FB
G3/4 BSPP
3.38
1.56
1.96
3/4
NS-751-12FO
1 1/16-12UN
3.51
1.56
1.96
1
NS-1001-16FP
1-11 1/2 NPSF
3.70
1.75
2.25
1
NS-1001-16FB
G 1 BSPP
3.81
1.75
2.25
1
NS-1001-16FO
1 5/16-12UN
3.81
1.75
2.25
* Contact factory for Connect-Under-Pressure option availability in the 1/2” size.
Body
Size
(in.)
Part
No.
Steel
Thread
Size
Overall
Length
Dimensions (in.)
Exposed*
Hex
Length
Size
3/8
3/8
NS-372-6FP
NS-372-6FB
3/8-18 NPSF
G3/8 BSPP
D
1.70
1.78
E
1.17
1.25
3/8
1/2
1/2
1/2
3/4
3/4
3/4
1
1
1
NS-372-8FO
NS-502-8FP
NS-502-8FB
NS-502-10FO
NS-752-12FP
NS-752-12FB
NS-752-12FO
NS-1002-16FP
NS-1002-16FB
NS-1002-16FO
3/4-16UNF
1/2-14 NPSF
G1/2 BSPP
7/8-14UNF
3/4-14 NPSF
G3/4 BSPP
1 1/16-12UN
1-11 1/2 NSPF
G 1 BSPP
1 5/16-12UN
1.91
1.81
1.95
2.14
2.25
2.47
2.62
2.64
2.78
2.87
1.38
0.69
0.83
1.02
1.12
1.34
1.49
1.54
1.68
1.77
Wt. (LB.)
P/Piece
0.36
0.38
0.40
0.80
0.74
0.80
1.48
1.54
1.58
2.35
2.36
2.36
Largest
Diameter
Wt. (LB.)
P/Piece
F
0.94
0.94
G
1.08
1.08
0.16
0.16
1.06
1.06
1.06
1.12
1.37
1.37
1.37
1.62
1.62
1.62
1.23
1.23
1.23
1.30
1.59
1.59
1.59
1.88
1.88
1.88
0.20
0.20
0.22
0.28
0.48
0.54
0.65
0.72
0.74
0.80
* This dimension represents the portion that is exposed when the nipple is inserted into the mating Parker Coupler.
Standard Port Configurations
FP - Female Pipe Thread
FO - Female Straight Thread
FB - Female British Standard Pipe Parallel
Optional Seals
Optional Seals Suffix
E4
Fluorocarbon
E5
Ethylene Propylene (EPR)
E35
Perfluoroelastomer (Contact factory for Seal options)
B-21
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Couplers
NS Series
Non-Spill Adapters
Hydraulic Quick Couplings
How To Order
Parker Non-Spill Adapters were designed due to the
widespread use of several coupling types in the construction
market. These adapters help the user adapt between poppet
style couplings and non-spill type couplings. Adapters are
widely available with Parker FE and FF Series to Parker 6600
Series coupling connections. This product is especially useful
where multiple hydraulic attachments are being used with
skid steer loaders.
Adapter Part Number
E A S – 500
1/2" Body Size
Male Half of Adapter
E – FE Series (ISO 16028 Standard)
F – FF Series
S – 6600 Series
Materials Of Construction
Adapter Series
Body:
Steel
Finish:
Zinc plated with yellow chromate finish
Female Half of Adapter
E – FE Series (ISO 16028 Standard)
F – FF Series
S – 6600 Series
Specifications
Body Size (in.)
Rated Pressure (PSI) – EAS/SAE
Rated Pressure (PSI) – FAS/SAF
Temperature Range
Max Spillage Per Disconnect (ml.)
1/2
3625
3000
-40° to + 250°F
.020
(Flush Face End)
Max Air Inclusion Upon Connect (ml.)
.070
Body
Size
Part
Number
Thread
Size
Overall
Length
A
B
C
1/2
EAS-500
NA
3.364
1.380
1.50
Adapters
1/2
SAE-500
NA
3.000
1.250
1.48
EAS-500
1/2
FAS-500
NA
3.390
1.380
1.54
1/2
SAF-500
NA
2.95
1.125
1.48
(Flush Face End)
Rated Flow (GPM)
12
Hex
Size
Largest
Diameter
C
Performance
FE/FF to 6600 Adapter (1/2")
Test Fluid: Oil - 200 SUS
B
SAE-500
A
60
50
C
Pressure Drop in PSID
B Hydraulics
Applications
B
A
FAS-500
40
30
1/2"
20
C
10
B
A
SAF-500
0
0
2
4
6
8
10
12
14
16
18
Flow in USGPM
C
B
A
B-22
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Non-Spill Couplings
Hydraulic Quick Couplings
FF Series
1
2
3
B Hydraulics
4
5
7
8
6
Applications
Features
Parker FF Series couplings are widely used in the public
utility market where hydraulic oil spillage can constitute a
serious safety hazard, particularly in overhead bucket hoists
that are used for maintenance of high-voltage power
transmission lines. These couplings are also used for quick
change of hydraulic tools in construction, railway maintenance
and mining industries. The ease of cleaning makes them ideal
for use in these types of hostile environments.
1. Sleeve locking mechanism is engaged by rotating sleeve after
connection. It prevents accidental disconnection when, for
example, the coupling is dragged along the ground during use.
Note: See pages noted in Table of Contents for dust plugs
and caps for the Parker full line of hydraulic couplings.
3. Steel construction, zinc plated with yellow chromate finish.
Hardened nipples and sleeves and solid barstock
construction for maximum resistance to damage from
hydraulic and mechanical shock.
Performance
FF Series (1/4", 3/8", 1/2")
Test Fluid: Oil - 200 SUS
4. This Anti-Blowout Nitrile/PTFE bonded seal is designed to
prevent blow-out or damage during severe service conditions.
25
5. Durable ball-locking mechanism assures reliable connections,
every time. A large number of locking balls distributes the
work load evenly while providing alignment and swiveling
action to reduce hose torque and prolong hose life. CAUTION:
These products are not to be used as swivels. Rotation under
pressure will result in excessive and premature wear.
Pressure Drop in PSID
20
1/2"
15
3/8"
1/4"
6. Female pipe (NPSF), British pipe (BSPP) and SAE
O-Ring Boss are available as standard.
10
7. FF Series couplings employ flush valving when connecting or
disconnecting. This means that the valves are mated together
so that only small amounts of fluid can be lost during
disconnection or air inclusion during reconnection.
5
0
0
2
4
6
8
10
12
14
16
18
Flow in USGPM
FF Series (3/4" & 1")
Test Fluid: Oil - 200 SUS
45
40
35
Pressure Drop in PSID
2. Sleeve mechanism is designed to help prevent dirt from
entering the internal mechanism and thus causing faulty
operation when connecting or disconnecting. The sleeve
covers the retaining ring and also incorporates a dust seal in
the spring area.
8. The 3/8" size conforms to HTMA (Hydraulic Tool Manufactures
Association) standards. All sizes incorporate flush face mating
surfaces which greatly facilitate cleaning of the product when
disconnected. HTMA couplings (3/8" only)-coupler and nipple
are marked with a directional flow arrow as per specifications.
However, couplings are bi-directional.
Specifications
30
Body Size (in.)
Rated Pressure (PSI)
Rated Flow (GPM)
Temperature Range
Spillage (ML)
1"
25
3/4"
20
15
10
1/4
5000
3
1
3000
50
.015
3/8
1/2
3/4
3000 3000
3000
6
12
28
-40° to + 250°F
.015
.020
.150
.020
.020
.150
.200
(max. per disconnect)
5
Air Inclusion (ML)
.070
.100
(max. per connect)
0
0
10
20
30
40
50
60
70
Flow in USGPM
B-23
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Non-Spill Couplings
Hydraulic Quick Couplings
B Hydraulics
Couplers
C
B
A
Nipples
G
F
E
D
FF Series
Body
Size
(in.)
Part
No.
Steel
Thread
Size
Overall
Length
Dimensions (in.)
Hex
Largest
Size
Diameter
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
1/2
1/2
FF-251-4FP
FF-251-4MP
FF-251-6FO
FF-371-6FP
FF-371-8FP
FF-371-6FB
FF-371-8FB
FF-371-8FO
FF-501-8FP
FF-501-10FO
1/4-18 NPSF
1/4-18 NPTF
9/16-18 UNF
3/8-18 NPSF
1/2-14 NPSF
G3/8 BSPP
G1/2 BSPP
3/4-16 UNF
1/2-14 NPSF
7/8-14 UNF
A
1.79
1.84
1.91
2.39
2.80
2.45
2.80
2.82
2.67
2.89
B
1.00
1.00
1.00
1.06
1.06
1.06
1.06
1.06
1.37
1.37
C
1.06
1.06
1.06
1.20
1.20
1.20
1.20
1.20
1.58
1.58
0.23
0.24
0.23
0.44
0.50
0.45
0.48
0.52
0.88
1.05
3/4
3/4
1
1
FF-751-12FP
FF-751-12FO
FF-1001-16FP
FF-1001-16FO
3/4-14 NPSF
1 1/16-12 UNF
1-11 1/2NPSF
1 5/16-12UNF
3.50
3.75
4.14
4.24
1.75
1.75
1.87
1.87
1.94
1.94
2.25
2.25
1.84
1.93
2.64
2.68
Dimensions (in.)
Exposed*
Hex
Length
Size
Wt. (LB.)
P/Piece
Body
Size
(in.)
Part
No.
Steel
Thread
Size
Overall
Length
1/4
FF-252-4FP
1/4-18 NPSF
D
1.66
E
1.15
F
1.00
G
1.06
0.16
1/4
1/4
3/8
3/8
3/8
3/8
3/8
1/2
1/2
3/4
3/4
1
1
FF-252-4MP
FF-252-6FO
FF-372-6FP
FF-372-8FP
FF-372-6FB
FF-372-8FB
FF-372-8FO
FF-502-8FP
FF-502-10FO
FF-752-12FP
FF-752-12FO
FF-1002-16FP
FF-1002-16FO
1/4-18 NPTF
9/16-18 UNF
3/8-18 NPSF
1/2-14 NPSF
G3/8 BSPP
G1/2 BSPP
3/4-16 UNF
1/2-14 NPSF
7/8-14 UNF
3/4-14 NPSF
1 1/16-12 UNF
1-11 1/2NPSF
1 5/16-12UNF
1.72
1.66
2.31
2.64
2.45
2.70
2.70
2.75
2.97
3.38
3.58
3.85
3.85
1.18
1.15
1.71
2.04
1.86
2.16
2.16
2.11
2.29
2.47
2.64
2.60
2.60
1.00
1.00
0.94
1.06
0.94
1.06
1.06
1.12
1.12
1.50
1.50
1.87
1.87
1.06
1.06
1.08
1.19
1.08
1.19
1.19
1.30
1.30
1.73
1.73
2.17
2.17
0.26
0.16
0.26
0.32
0.28
0.32
0.30
0.42
0.44
1.00
1.02
1.60
1.70
Largest
Diameter
Wt. (LB.)
P/Piece
* This dimension represents the portion that is exposed when the nipple is inserted into the mating Parker Coupler.
Standard Port Configurations
FP - Female Pipe Thread
MP - Male Pipe Thread
FO - Female Straight Thread
FB - Female British Standard Pipe Parallel
Optional Seals
Optional Seals Suffix*
– E4
Fluorocarbon
– E5
Ethylene Propylene (EPR)
– E35
Perfluoroelastomer (Contact Factory for Seal Options).
* Optional seals include O-ring & Back-Up Ring, not Anti-Blow Out bonded seal.
FF Series Repair Kits
1/4" Nipple
3/8" Nipple
1/2" Nipple
3/4" Nipple
1" Nipple
1/4" Coupler
3/8" Coupler
1/2" Coupler
3/4" Coupler
1" Coupler
FF-252-KIT
FF-372-KIT
FF-502-KIT
FF-752-KIT
FF-1002-KIT
FF-251-KIT
FF-371-KIT
FF-501-KIT
FF-751-KIT
FF-1001-KIT
FF-252-KIT-E4
FF-372-KIT-E4
FF-502-KIT-E4
FF-752-KIT-E4
FF-1002-KIT-E4
FF-251-KIT-E4
FF-371-KIT-E4
FF-501-KIT-E4
FF-751-KIT-E4
FF-1001-KIT-E4
FF-252-KIT-E5
FF-372-KIT-E5
FF-502-KIT-E5
FF-752-KIT-E5
FF-1002-KIT-E5
FF-251-KIT-E5
FF-371-KIT-E5
FF-501-KIT-E5
FF-751-KIT-E5
FF-1001-KIT-E5
FF/FS-251-TOOL
FF/FS-371-TOOL
FF-501-TOOL
B-24
FF/FS-751-TOOL FF/FS-1001-TOOL
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Non-Spill Couplings
Hydraulic Quick Couplings
FE Series
Features
• Sealed spring cavity prevents dust collection and possible
sleeve binding.
B Hydraulics
• Heat treated valve sleeve and poppet resist
scratches and wear.
• Crimped valve seal prevents seal washout.
• Hardened locking collar sleeve resists brinelling, avoids
cracking and provides longer life.
• Large number of locking balls resists brinelling.
• Concealed lock ring prevents accidental removal.
• Zinc plate with yellow chromate finish resists corrosion.
• Positive lock retaining ring will not wash out under
high flow conditions.
• Induction hardened locking surface reduces wear
and brinelling.
• Anti-blowout Nitrile/PTFE bonded nipple seal prevents
damage and blow-out when connecting with residual
pressure.
Parker FE Series couplings were designed for the
construction equipment market and are used extensively on
skid steer loaders. The non-spill feature eliminates hydraulic
spillage and air inclusion when connecting or disconnecting
hydraulic attachments. The FE Series is also ideal for many
other applications where hydraulic spillage is a concern and
global interchangeability with other manufacturers is
important. ISO-16028 Interchange.
Materials Of Construction
Body:
Steel
Finish: Zinc plated with yellow chromate finish
Valve:
Flush face valving
Seal:
Anti blow-out Nitrile/PTFE bonded seal (male only)
Performance
FE Series (1/2" & 5/8")
Test Fluid: Oil - 200 SUS
40
35
30
Pressure Drop in PSID
Applications
5/8"
25
20
1/2"
15
10
5
0
0
Specifications
Body Size (in.)
Rated Pressure (PSI)
Temperature Range
Spillage (ML)
5
10
15
20
25
30
Flow in USGPM
1/2
3000
5/8
3625
-40° to + 250°F
0.020
0.030
(max. per disconnect)
Air Inclusion (ML)
0.070
0.070
12
20
(max. per connect)
Rated Flow (GPM)
B-25
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Non-Spill Couplings
Hydraulic Quick Couplings
FE Series
B Hydraulics
Couplers
Body
Size
(in.)
Part
No.
Steel
Thread
Size
Overall
Length
1/2"
1/2"
5/8"
FE-501-8FP*
FE-501-12FO*
FE-621-12FO*
1/2-14 NPSF
1-1/16-12 UNF
1-1/16-12 UNF
A
2.65
3.10
3.67
Dimensions (in.)
Hex
Largest
Size
Diameter
B
1.38
1.38
1.62
C
1.58
1.58
1.74
Wt. (LB.)
P/Piece
0.85
0.90
1.51
* Non Sleeve Lock available – add “–NL” to part number
C
B
A
Nipples
G
Body
Size
(in.)
Part
No.
Steel
Thread
Size
Overall
Length
1/2"
1/2"
5/8"
FE-502-8FP
FE-502-12FO
FE-622-12FO
1/2-14 NPSF
1-1/16-12 UNF
1-1/16-12 UNF
D
2.77
3.05
3.40
Dimensions (in.)
Exposed
Hex
Length
Size
E
1.96
2.20
2.60
F
1.25
1.38
1.50
Largest
Diameter
Wt. (LB.)
P/Piece
G
1.38
1.50
1.65
0.55
0.56
0.95
Standard Port Configurations
FP - Female Pipe Thread
FO - Female Straight Thread
F
E
D
B-26
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Non-Spill Couplings
FEM Series
FEM Series
Applications
B Hydraulics
Parker FEM Series couplings are designed to meet the
stringent design and pressure requirements of ISO 16028.
The FEM modular design also facilitates wider variations in
fitting options. Parker FEM couplers are designed for use in
the construction, utility and agricultural equipment markets.
As with all Parker flush-face designs the non-spill feature
eliminates hydraulic spillage and air inclusion when
connecting or disconnecting hydraulic attachments. The
FEM Series is also ideal for many other applications where
hydraulic spillage is a concern and global interchangeability
with other manufacturers is important.
Materials of Construction
Body:
Finish:
Valve:
Seal:
Features
Steel
Zinc plated with yellow chromate finish
Flush face valving
Anti blow-out Nitrile/PTFE bonded seal
(male only)
Performance
FEM Series (1/4", 3/8", 1/2")
Test Fluid: Oil - 150 SUS
30
25
1/2"
Pressure Drop in PSID
• Meets or exceeds ISO 16028 specification design and
test requirements.
• Wider size variations and increased pressures over
FE couplers.
• ISO-16028 Interface for universal interchangeability.
• Modular design for increased flexibility with fitting
port options.
• Brinell relief on male half to increase life and resist wear.
• Induction hardened locking surface to resist brinelling,
damage and abuse.
• Heat Treated components to resist scratches and wear.
• Smooth flow path for low pressure drop.
• Heavy locking collar to resist damage and abuse.
• Anti-blowout Nitrile/PTFE bonded male half seal prevents
damage and premature failure with residual system pressure.
• Optional Color coding bands for system identification.
• Crimped valve seal prevents seal washout.
• Steel guide to resist damage on breaker applications.
• Push-to-connect locking mechanism.
• Optional sleeve lock.
20
3/8"
15
1/4"
10
5
0
0
2
4
6
8
10
12
14
16
18
Flow in USGPM
FEM Series (5/8", 3/4", 1")
Test Fluid: Oil - 150 SUS
50
45
Specifications
Body Size (in.)
1/4
3/8
1/2
5/8
3/4
1
Rated Pressure (PSI) 4568 3625 3625 3625 3625 2900
Rated Flow (GPM)
3
6
12
20
26
50
Temperature Range (std.seals)
-40 to +250° F
Spillage (ML)
0.015 0.015 0.020 0.030 0.150 0.200
(max. per disconnect)
Air Inclusion (ML)
(max. per connect)
Pressure Drop in PSID
40
35
1"
30
25
3/4"
20
5/8"
15
10
5
0.020 0.020 0.070
0.070
0.100 0.150
0
0
10
20
30
40
50
60
70
Flow in USGPM
B-27
Quick Coupling Division
8145 Lewis Road
Minneapolis, MN
Non-Spill Couplings
FEM Series
FEM Series
B Hydraulics
Couplers
C
B
A
Nipples
G
F
E
D
Body
Size
(in.)
Part
Number
1/4
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
3/4
3/4
1
1
FEM-251-4FP-NL
FEM-371-6FP-NL
FEM-371-8FO-NL
FEM-501-8FP-NL
FEM-501-10BMS-NL
FEM-501-10BMF-NL
FEM-501-10FO-NL
FEM-501-12FO-NL
FEM-621-12FO-NL
FEM-751-12FP-NL
FEM-751-12FO-NL
FEM-1001-16FP-NL
FEM-1001-16FO-NL
Body
Size
(in.)
Part
Number
1/4
FEM-252-4FP
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
3/4
3/4
1
1
FEM-372-6FP
FEM-372-8FO
FEM-502-8FP
FEM-502-10FO
FEM-502-10BMS
FEM-502-10BMF
FEM-502-12FO
FEM-622-12FO
FEM-752-12FP
FEM-752-12FO
FEM-1002-16FP
FEM-1002-16FO
Thread
Size
Overall
Length
.250-18 NPSF
.375-18 NPSF
.750-16 UNF
.500-14 NPSF
1.000-14 UNS
.875-14 UNF
.875-14 UNF
1.062-12 UN
1.062-12 UNF
.750-14 NPSF
1.062-12 UNF
1.000-11.5 NPSF
1.312-12 UNF
Thread
Size
Hex
Size
Largest
Diameter
A
B
C
1.96
2.89
2.89
3.04
4.02
4.03
3.04
3.24
3.70
3.95
3.95
4.21
4.21
1.00
1.06
1.06
1.06
1.38
1.38
1.25
1.38
1.50
1.75
1.75
2.00
2.00
1.06
1.19
1.19
1.19
1.58
1.58
1.58
1.58
1.70
1.95
1.95
2.25
2.25
Overall Exposed
Length Length*
Wt. (LB)
P/Piece
0.25
0.51
0.51
0.93
0.95
0.93
0.93
0.93
1.40
2.04
2.04
2.70
2.70
Hex Largest Wt. (LB)
Size Diameter P/Piece
D
E
F
G
.250-18 NPSF
1.71
1.25
1.00
1.06
0.17
.375-18 NPSF
.750-16 UNF
.500-14 NPSF
.875-14 UNF
1.000-14 UNS
.875-14 UNF
1.062-12 UN
1.062-12 UN
.750-14 NPSF
1.062-12 UN
1.000-11.5 NPSF
1.312-12 UN
2.48
2.48
2.85
2.85
3.84
3.85
3.05
3.09
3.38
3.38
3.85
3.85
1.83
1.83
2.15
2.15
3.14
3.15
2.35
2.39
2.46
2.46
2.93
2.93
1.06
1.06
1.38
1.38
1.38
1.38
1.38
1.50
1.75
1.75
2.00
2.00
1.16
1.16
1.50
1.50
1.50
1.50
1.50
1.65
1.94
1.94
2.25
2.25
0.32
0.32
0.54
0.54
0.56
0.54
0.54
0.76
1.12
1.12
1.72
1.72
* This dimension represents the portion that is exposed when the nipple is inserted into the mating
Parker Coupler.
Standard Port Configurations
FP - Female Pipe Thread
FO - Female Straight Thread
BMF- Bulkhead Male Flare 37° JIC
BMS - Bulkhead Male Seal-lok
Other Fitting Port Configurations available upon request.
B-28
Quick Coupling Division
8145 Lewis Road
Minneapolis, MN
Non-Spill Couplings
Hydraulic Quick Couplings
FC Series (Connect-Under-Pressure)
Parker FC Series nipple provides connect-under-pressure
capability with up to 3000 PSI of trapped pressure in the
nipple and are ideal for applications where residual pressure
makes reconnect difficult. Utilized primarily in the construction equipment market, FC Series products are commonly
found on hydraulic attachments used in skid steer
applications. The FC Series mates with the FF Series
Parker interface.
Features
• Connect-Under-Pressure nipple only.
• Hardened locking surface.
• Steel construction, zinc plated with yellow chromate finish
for corrosion resistance.
• Anti Blowout Nitrile/PTFE bonded nipple seal.
Description
• Flush Face Valving
FC Series products operate slightly different from traditional
non-spill couplings. With no pressure in the coupler and up to
3000 PSI of trapped pressure in the nipple, begin to couple
the mating halves. Delay momentarily during connection to
allow trapped pressure to equalize with the mating half
before completing the connection.
Performance
FC Series (3/8", 1/2", 3/4")
Test Fluid: Oil - 200 SUS
Note: Protective dust plugs and caps play a crucial role in the
life of a quick coupling and no purchase of a hydraulic quick
coupling is complete without the selection of an appropriate
dust plug and cap. See pages noted in Table of Contents for
dust plugs and caps for the Parker full line of hydraulic
couplings.
Specifications
60
Body Size (in.)
30
Rated Pressure (PSI)
Rated Connect-Under-Pressure
Capability
Rated Flow (GPM)
Spillage (ML)
20
Air Inclusion (ML)
50
Pressure Drop in PSID
3/4"
40
3/8
1/2
3/4
3000
3000
3000
3000
6
.015
3000
12
.020
1500
26
.015
.020
.070
.100
(max. per disconnect)
1/2"
(max. per connect)
3/8"
10
0
0
5
10
15
20
25
30
35
40
Flow in USGPM
Nipples
D
E
G
Body
Size
(in.)
Part
No.
Steel
Mating
Half
Thread
Size
Overall
Length
3/8
3/8
3/8
1/2
1/2
3/4
3/4
FC-372-6FP
FC-372-8FO
FC-372-8FP
FC-502-8FP
FC-502-10FO
FC-752-12FO
FC-752-12FP
FF-371
FF-371
FF-371
FF-501
FF-501
FF-751
FF-751
3/8-18 NPSF
3/4-16 UNF
1/2-14 NPSF
1/2-14 NPSF
7/8-14 UNF
1 1/16-12 UNF
3/4-14 NPSF
D
3.30
3.30
3.30
3.46
3.46
4.81
4.81
Dimensions (in.)
Exposed
Hex
Length
Size
E
2.58
2.58
2.58
2.65
2.65
3.72
3.72
F
1.062
1.062
1.062
1.125
1.125
1.500
1.500
Largest Wt. (LB.)
Diameter P/Piece
G
1.16
1.16
1.16
1.22
1.22
1.65
1.65
0.45
0.42
0.42
0.53
0.52
1.32
1.34
F
Standard Port Configurations
FP - Female Pipe Thread
FO - Female Straight Thread
B-29
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Applications
Non-Spill Couplings
Hydraulic Quick Couplings
FEC Series (Connect-Under-Pressure)
Applications
B Hydraulics
Parker FEC Series nipple provide connect-under-pressure
capability with up to 3000 PSI of trapped pressure in the
nipple and are ideal for applications where residual pressure
makes reconnect difficult. Utilized primarily in the construction equipment market, FEC Series products are commonly
found on hydraulic attachments used in skid steer
applications. The FEC Series mates with the FE and FEM
Series European interface ISO 16028 couplers.
Features
• Connect-Under-Pressure nipple.
• Hardened locking surface.
• Steel construction, zinc plated with yellow chromate finish
for corrosion resistance.
• Anti blowout Nitrile/PTFE bonded nipple seal.
Description
• Flush face valving.
FEC Series products operate slightly different from traditional
non-spill couplings. With no pressure in the coupler and up to
3000 PSI of trapped pressure in the nipple, begin to couple
the mating halves. Delay momentarily during connection to
allow trapped pressure to equalize with the mating half
before completing the connection.
Performance
FEC Series (1/2", 5/8", 3/4", 1")
Test Fluid: Oil - 200 SUS
Note: Protective dust plugs and caps play a crucial role in the
life of a quick coupling and no purchase of a hydraulic quick
coupling is complete without the selection of an appropriate
dust plug and cap. See pages noted in Table of Contents for
dust plugs and caps for the Parker full line of hydraulic
couplings.
Specifications
80
Body Size (in.)
70
5/8"
Pressure Drop in PSID
60
3/4"
1/2
Rated Pressure (PSI)
3625
Rated Connect-Under-Pressure
Capability
3000
Rated Flow (GPM)
12
Spillage (ML)
0.020
(max. per disconnect)
Air Inclusion (ML)
0.070
(max. per connect)
1"
50
40
1/2"
30
5/8
3/4
1
3625
3625
2900
1700
20
0.03
1500
26
0.150
1000
50
0.20
0.070
0.100
0.150
20
10
0
0
10
20
30
40
50
60
70
Flow in USGPM
Nipples
D
E
G
F
Body
Size
(in.)
Part
No.
Steel
1/2
1/2
1/2
5/8
3/4
1
1
FEC-502-8FP
FEC-502-10FO
FEC-502-12FO
FEC-622-12FO
FEC-752-12FO
FEC-1002-16FP
FEC-1002-16FO
Mating
Half
Thread
Size
Overall
Length
D
FE-501 1/2-14 NPSF 3.50
FE-501 7/8-14 UNF
3.50
FE-501 1 1/16-12 UNF 3.79
FEM-621 1 1/16-12 UN
4.19
FEM-751 1 1/16-12 UN
4.84
FEM-1001 1-11 1/2 NPSF 5.35
FEM-1001 1 5/16-12 UN
5.35
Dimensions (in.)
Exposed
Hex
Length
Size
E
2.68
2.68
2.97
3.39
3.76
4.15
4.15
F
1.125
1.125
1.500
1.500
1.500
1.88
1.88
Largest Wt. (LB.)
Diameter P/Piece
G
1.22
1.22
1.65
1.65
1.65
2.06
2.06
Standard Port Configurations
FP - Female Pipe Thread
FO - Female Straight Thread
B-30
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Non-Spill Couplings
Hydraulic Quick Couplings
FH Series
Features
• 10,000 PSI operating pressure (700 bar).
• Sleeve on coupler and nipple body have a RED finish for
identification purposes.
• Simple Push-To-Connect operation.
• Sleeve-Lock to prevent accidental disconnect.
• Non interchangeable with low pressure flush face couplings.
• Meets performance and dimensional specifications of
HTMA requirements, 10,000 PSI (700 bar).
• Anti Blow-Out Nitrile/PTFE bonded nipple seal.
Applications
• Hydraulic Crimpers, Cutters, Jacks, Benders, Clamps,
Wedges
• Rescue Equipment
• High Pressure Test Equipment
Description
Parker FH Series high pressure couplings are an innovative
product combining the advantages of a flush-face design with
a highly technical performance of a rated pressure of 10,000
PSI. For safety purposes, this product does not interchange
with flush-face couplings having a lower pressure rating.
Note: Protective dust plugs and caps play a crucial role in the
life of a quick coupling and no purchase of a hydraulic quick
coupling is complete without the selection of an appropriate
dust plug and cap. See pages noted in Table of Contents for
dust plugs and caps for the Parker full line of hydraulic
couplings.
Performance
Materials of Construction
FH Series (3/8")
Test Fluid: Oil - 200 SUS
Body:
45
Finish: Zinc Plated with yellow Chromate.
Sleeve and Nipple plated with Red Chromate.
40
35
Pressure Drop in PSID
Steel
30
25
3/8"
Valve:
Flush Face Valves
Seal:
Anti blow-out Nitrile/PTFE bonded seal
( nipple only)
20
15
10
Specifications
5
Body Size (in.)
Rated Pressure (PSI)
Rated Flow (GPM)
Temperature Range
Spillage (ML)
(max. per disconnect)
Air Inclusion (ML)
(max. per connect)
0
0
1
2
3
4
5
6
7
8
9
Flow in USGPM
B-31
3/8
10,000
6
-40° to +250° F
.020
.070
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
• Flush face, non-spill valving, both halves.
Non-Spill Couplings
Hydraulic Quick Couplings
FH Series
Couplers
B Hydraulics
Body
Size
(in.)
Part
No.
Steel
3/8 FH-371-6FP
3/8 FH-371-6MP
3/8 FH-371-6FB
Wrench
Flats
Dimensions (in.)
Largest
Wt. (LB.)
Diameter
P/Piece
Thread
Size
Overall
Length
A
B
C
3/8 -18 NPTF
3/8 -18 NPTF
G3/8 -BSPP
2.63
2.85
2.55
1.12
1.12
1.12
1.23
1.23
1.23
Thread
Size
Overall
Length
Wrench
Flats
D
E
F
0.44
0.45
0.45
C
B
A
Nipples
Body
Size
(in.)
Part
No.
Steel
Dimensions (in.)
Largest
Wt. (LB.)
Diameter
P/Piece
3/8
FH-372-6FP
3/8-18 NPTF
2.12
1.00
1.23
0.26
3/8
FH-372-6FB
G3/8 -BSPP
2.12
1.00
1.23
0.28
F
E
D
Standard Port Configurations
FP - Female Pipe Thread
MP -Male Pipe Thread
FB - Female British Standard Parallel
B-32
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Non-Spill Couplings
Hydraulic Quick Couplings
FS Series
Features
Applications
Parker FS Series couplings virtually eliminate fluid loss
upon disconnection, and minimize air inclusion during
connections. They are ideal for use where spillage may
cause undesirable conditions or constitute a safety hazard.
The FS Series couplings have double shut-off flush mating
valves that are suitable for sealing off media in chemical processing, chemical dispensing, food processing, and other
corrosive applications. Working pressures to 2000 PSI.
Note: Protective dust plugs and caps play a crucial role in the
life of a quick coupling and no purchase of a hydraulic quick
coupling is complete without the selection of an appropriate
dust plug and cap. See pages noted in Table of Contents for
dust plugs and caps for the Parker full line of hydraulic
couplings.
Materials of Construction
Machined Parts:
Springs:
Locking Balls:
Performance Flow Data
FS Series (1/4", 3/8", 1/2")
Test Fluid: Water
30
25
Pressure Drop in PSID
1/2"
20
1/4
2000
3
.015
3/8
2000
6
.015
1/2
2000
12
.020
3/4
2000
28
.150
1
2000
50
.250
.010
.020
.070
.100
.182
5
0.9
1.8
3.0
7.0
10.1
0
(max. per disconnect)
Air Inclusion (ML)
Stainless Steel, AISI type 316
Stainless Steel, AISI type 316.
1/4" - 302 SS;
3/8" - 1" - Tungsten Carbide
PTFE
Fluorocarbon is standard.
Wide range is available.
Backup Washers:
Elastomer Seals:
Specifications
Body Size (in.)
Rated Pressure (PSI)
Rated Flow (GPM)
Spillage (ML)
B Hydraulics
• Simple to operate: Push to connect, pull on knurled sleeve
to disconnect.
• Flush face valves exhibit minimal spillage upon disconnect
and minimal air inclusion upon connect.
• Superior locking ball design – a large number of locking
balls distribute the workload better and allow for some
rotation between the male and female halves of the
coupling under pressure.
• Excellent flow vs pressure drop characteristics when
compared with other low spill quick couplings.
• Material construction is 316 stainless steel with
fluorocarbon seals as standard.
• Wide range of seal materials available.
• Repair kits available to replace critical elastomer seals
(all sizes).
3/8"
15
1/4"
10
(max. per connect)
CV
0
2
4
6
8
10
12
14
16
18
Flow in USGPM
FS Series (3/4" & 1")
Test Fluid: Water
Temp°F
Rating
None*
E5
E1
E35
Fluorocarbon
Ethylene Propylene (EPR)
Nitrile
Perfluoroelastomer (Contact Factory)
-15 to 400
-65 to 300
-40 to 250
-20 to 600
35
30
1"
Pressure Drop in PSID
Part No.
Seal Suffix
Temperature Range (continuous)
Seal
Compound
*Fluorocarbon is standard seal.
25
20
3/4"
15
10
5
0
0
10
20
30
40
50
60
70
Flow in USGPM
B-33
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Non-Spill Couplings
Hydraulic Quick Couplings
FS Series
Couplers
B Hydraulics
Female Pipe Thread
A
B
C
Nipples
Female Pipe Thread
E
G
F
D
Body
Size (in.)
Part
No.
Thread
Size
Overall
Length
Hex
Size
Largest
Diameter
Wt. (LB.)
P/Piece
1/4
1/4
1/4
3/8
3/8
1/2
1/2
3/4
3/4
1
1
FS-251-4FP
FS-251-4MP
FS-251-6FO
FS-371-6FP
FS-371-8FO
FS-501-8FP
FS-501-10FO
FS-751-12FP
FS-751-12FO
FS-1001-16FP
FS-1001-16FO
1/4-18 NPT
1/4-18 NPTF
9/16-18UNF
3/8-18 NPT
3/4-16 UNF
1/2-14 NPT
7/8-14 UNF
3/4-14 NPT
1-1/16-12 UNF
1-11 1/2 NPT
1-5/16-12 UNF
A
1.79
2.00
1.92
2.52
2.83
2.74
2.86
3.63
3.73
4.14
4.24
B
1.00
1.00
1.00
1.06
1.12
1.38
1.38
1.75
1.75
1.87
1.87
C
1.06
1.06
1.06
1.30
1.30
1.58
1.58
1.99
1.99
2.25
2.25
0.25
0.25
0.24
0.58
0.63
0.92
0.96
2.00
2.12
2.76
2.80
Body
Size (in.)
Part
No.
Thread
Size
Overall
Length
Exposed
Length
Hex
Size
1/4
1/4
1/4
3/8
3/8
1/2
1/2
3/4
3/4
1
1
FS-252-4FP
FS-252-4MP
FS-252-6FO
FS-372-6FP
FS-372-8FO
FS-502-8FP
FS-502-10FO
FS-752-12FP
FS-752-12FO
FS-1002-16FP
FS-1002-16FO
1/4-18 NPT
1/4-18 NPTF
9/16-18 UNF
3/8-18 NPT
3/4-16 UNF
1/2-14 NPT
7/8-14 UNF
3/4-14 NPT
1-1/16-12 UNF
1-11 1/2 NPT
1-5/16 12 UNF
D
1.66
1.87
1.66
2.31
2.45
2.75
2.85
3.38
3.38
3.89
3.89
E
1.14
1.34
1.26
1.71
1.71
2.11
2.03
2.47
2.27
2.60
2.51
F
1.00
1.00
1.00
.94
1.06
1.12
1.12
1.50
1.50
1.87
1.87
Largest Wt. (LB.)
Diameter P/Piece
G
1.06
1.06
1.06
1.08
1.19
1.30
1.30
1.73
1.73
2.17
2.17
0.18
0.18
0.17
0.26
0.30
0.44
0.48
1.02
1.14
1.60
1.64
Standard Port Configurations
FP - Female Pipe Thread
MP - Male Pipe Thread
FO - Female Straight Thread
FS Series Repair Kits
Repair kits are available for both coupler and nipple half of FS coupling. Kits include replacement elastomer seals, valve
assembly and instructions to perform rebuild. Spline tool must be ordered separately to accomplish coupler half repair. Other
tools required: Vise, Allen Wrench and Open End Wrench.
FS Repair Kits
Replacement Seals
TOOL Spline tool for Coupler
Repair
No Suffix Fluorocarbon Seals
E5
Ethylene Propylene (EPR)
E35
Perfluoroelastomer (Contact the Factory)
Nipple Repair Kits
1/4" Nipple
3/8" Nipple
1/2" Nipple
3/4" Nipple
1" Nipple
FS-252-KIT
FS-252-KIT-E5
FS-372-KIT
FS-372-KIT-E5
FS-502-KIT
FS-502-KIT-E5
FS-752-KIT
FS-752-KIT-E5
FS-1002-KIT
FS-1002-KIT-E5
Coupler Repair Kits
1/4" Coupler
FS-251-KIT
FS-251-KIT-E5
FF/FS-251-TOOL
3/8" Coupler
1/2" Coupler
3/4" Coupler
1" Coupler
FS-371-KIT
FS-371-KIT-E5
FF/FS-371-TOOL
FS-501-KIT
FS-501-KIT-E5
FS-501-TOOL
FS-751-KIT
FS-751-KIT-E5
FF/FS-751-TOOL
FS-1001-KIT
FS-1001-KIT-E5
FF/FS-1001-TOOL
B-34
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Connect Under Pressure Couplings
Hydraulic Quick Couplings
6100 Series
Parker’s 6100 Series, is a thread-to-connect low spill coupling
that can be used in a wide range of industrial applications
where connected under pressure is required. The 6100 is
ideal for connecting hydraulic lines on oil field equipment like
power tongs, swivels and mobile drilling rigs. It is also widely
used on dump trailers to connect the tractor to wet-line
hydraulic systems.
The 6100 Series is suitable for many applications where
high flow connect under pressure couplings are required.
Other uses include: submersible pumps, engine test stands,
and bulk liquid CO2 transfer (Special part numbers apply –
contact the Division).
Note: Protective dust plugs and caps play a crucial role in the
life of a quick coupling and no purchase of a hydraulic quick
coupling is complete without the selection of an appropriate
dust plug and cap. See pages noted in Table of Contents for
dust plugs and caps for the Parker full line of hydraulic
couplings.
Performance
Specifications
Body Size (in.)
Dash Number
*Rated Pressure (PSI)
Female Half
Male Half
3/4
-08
3/4
-12
1
-16
3000 3000 3000 2750 2000
3000 3000 3000 2500 2500
Complete Coupling Assembly
Rated Flow (GPM)
Temperature Range (std seals)
3000 3000 3000 2750 2500
12
28
50
76
100
-40° to +250°F.
6100 Series (1/2" & 3/4")
Test Fluid: OIL 150 SUS
1-1/4 1-1/2
-20
-24
100
90
Pressure Drop in PSID
70
3/4"
60
50
40
30
1/2"
20
10
0
0
5
10
15
20
25
30
35
40
Flow in USGPM
6100 Series (1", 1-1/4", 1-1/2")
Test Fluid: OIL 150 SUS
70
60
1-1/2"
Pressure Drop in PSID
* Minimum burst pressure is equal to three times the rated
pressure. Not recommended for continuous hydraulic impulse
applications at rated pressures.
80
50
1-1/4"
40
1"
30
20
10
0
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
Flow in USGPM
B-35
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Applications
Connect Under Pressure Couplings
Hydraulic Quick Couplings
6100 Series
Features
2
4
B Hydraulics
1
3
1. The connection indicator, a Parker innovation, serves as a
visual check for complete connection of the 6100 coupling.
It helps prevent premature failures and leaks. It assures
that the connection is complete and the valves fully open,
eliminating unnecessary flow restriction. (see drawing on
next page)
2. The Parker heavy-duty wing nut is ruggedly builtspecifically to withstand the hammer blows commonly
used to tighten and loosen this coupler.
6
3. The flange is designed to give a positive “no-slip”
bulkhead mounting to reduce downtime.
4. The bonded valve seal permits full pressure connect and
disconnect—without seal washout.
5
6
5. The flush face valve keeps air inclusion and spillage to a
minimum.
6. Corrosion resistant brass body makes this coupling
compatible with a broad range of media and provides
versatility.
6100 Series
Coupling with Wingnut
A
Body
Size
(in.)
Thread
Size
NPTF
Part No.
With
Flange
Part No.
Without
Flange
Overall
Connected
Length
Wt. (LB.)
P/Piece
3/4
3/4
1
1/2-14
3/4-14
1-11 1/2
6100-08
6100-12
6100-16
6120-08
6120-12
6120-16
A
5.20
5.20
5.99
2.12
3.27
3.19
1 1/4
1 1/2
1 1/4-11 1/2
1 1/2-11 1/2
6100-20
6100-24
6120-20
6120-24
6.33
6.55
2.73
3.52
Body
Size
(in.)
Thread
Size
NPTF
Part No.
With
Flange
Part No.
Without
Flange
Overall
Connected
Length
Wt. (LB.)
P/Piece
3/4
3/4
1
1 1/4
1 1/2
1/2-14
3/4-14
1-11 1/2
1 1/4-11 1/2
1 1/2-11 1/2
6110-08
6110-12
6110-16
6110-20
6110-24
6130-08
6130-12
6130-16
6130-20
6130-24
A
5.20
5.20
5.99
6.33
6.55
6100 Series
Coupling with Hex Nut
A
B-36
1.89
1.83
2.93
4.12
5.95
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Connect Under Pressure Couplings
Hydraulic Quick Couplings
6100 Series
Couplers
A
C
B
Body
Size
(in.)
Part
No.
Brass
Thread
Size
NPTF
Overall
Length
Dimensions (in.)
Wrench
Wing
Flats
Nut
3/4
3/4
1
1 1/4
1 1/2
6125-08
6125-12
6125-16
6125-20
6125-24
1/2-14
3/4-14
1-11 1/2
1 1/4-11 1/2
1 1/2-11 1/2
A
3.22
3.22
3.87
4.16
4.34
Body
Size
(in.)
Part
No.
Brass
Thread
Size
NPTF
Overall
Length
3/4
3/4
1
6135-08
6135-12
6135-16
1/2-14
3/4-14
1-11 1/2
A
3.22
3.22
3.87
B
1.16
1.16
1.43
C
1.75
1.75
2.13
1.07
1.07
1.63
1 1/4
1 1/2
6135-20
6135-24
1 1/4-11 1/2
1 1/2-11 1/2
4.16
4.34
1.78
2.00
2.50
2.75
2.47
3.15
B
1.16
1.16
1.43
1.78
2.00
Wt. (LB.)
P/Piece
C
4.06
4.06
4.38
5.20
5.32
1.30
1.26
1.89
2.84
3.72
Hex Nut
A
B
C
Dimensions (in.)
Wrench
Hex
Flats
Size
Wt. (LB.)
P/Piece
Nipples
D
F
Connection
Indicator
Line
G
Body
Size
(in.)
Part No.
Without
Flange
Brass
With
Flange
Brass
Thread
Size
NPTF
3/4
3/4
1
1 1/4
1 1/2
6105-08
6105-12
6105-16
6105-20
6105-24
6115-08
6115-12
6115-16
6115-20
6115-24
1/2-14
3/4-14
1-11 1/2
1 1/4-11 1/2
1 1/2-11 1/2
Dimensions (in.)
Overall
Hex
Wrench Wt. (LB.)
Length
Size
Flats
P/Piece
D
3.11
3.11
3.55
3.71
4.12
G
1.62
1.62
1.88
2.13
2.50
F
1.18
1.18
1.56
1.88
2.18
0.82
0.76
1.30
1.65
2.61
Flanges
Body
Size
(in.)
3/4
1
1 1/4
1 1/2
G
Dimensions (in.)
Bolt Hole
Bolt Circle
Diameter
Diameter
Part No.
Steel
6107-08
6107-16
6107-20
6107-24
(1 piece)
(1 piece)
(2 piece)
(2 piece)
G
.208
.208
.208
.281
H
2.125
2.375
2.625
3.250
H
B-37
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Wing Nut
Connect Under Pressure Couplings
Hydraulic Quick Couplings
8200 Series
Features
Parker 8200 Series couplings feature:
B Hydraulics
• Unique valve design permits connection while either or both
the coupler and nipple are under pressure.
• Double acting sleeve for one handed push-to-connect
operation when coupler is clamp or bulkhead mounted.
• Critical parts are hardened for durability.
• Dependable ball locking mechanism holds the mating
halves together.
• Couplers and nipples are precision machined
from solid bar stock.
Specifications
Applications
Body Size (in.)
Rated Pressure (PSI)
Rated Flow (GPM)
Temperature Range (std seals)
The 8200 Series brings to the industry a proven design for
use on construction equipment, forestry equipment,
agricultural machinery, oil tools, steel mill machinery, and
other demanding hydraulic applications.
Note: Protective dust plugs and caps play a crucial role in the
life of a quick coupling and no purchase of a hydraulic quick
coupling is complete without the selection of an appropriate
dust plug and cap. See pages noted in Table of Contents for
dust plugs and caps for the Parker full line of hydraulic
couplings.
1/2
3000
12
-40° to +250°F
Performance
8200 Series (1/2")
Test Fluid: Oil - 200 SUS
70
Special Order Information
Standard seal material is Nitrile, other seal options are
available. See Ordering Information at end of Section B and
Fluid Compatibility Chart at end of this catalog for assistance
in making seal selection.
Pressure Drop in PSID
60
50
40
1/2"
30
20
10
0
0
2
4
6
8
10
12
14
16
18
Flow in USGPM
B-38
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Connect Under Pressure Couplings
Hydraulic Quick Couplings
8200 Series
Couplers
Body
Size
(in.)
Part
No.
Steel
Thread
Size
NPSF
Thread
Size
ORB
Overall
Length
1/2
1/2
1/2
8250-4
8250-15
8250-16
1/2-14
–
–
–
3/4-16
7/8-14
A
3.29
3.29
3.29
Dimensions (in.)
Wrench
Largest
Flats
Diameter
B
0.87
0.87
0.87
C
1.50
1.50
1.50
Wt. (LB.)
P/Piece
0.63
0.63
0.63
A
C
B
Nipples
Female Thread
D
E
G
Body
Size
(in.)
Part
No.
Steel
Thread
Size
NPTF
Thread
Size
ORB
Overall
Length
1/2
1/2
1/2
1/2
1/2
1/2
8010-4
8010-4P*
8010-15
8010-15P*
8010-16
8010-16P*
1/2-14
1/2-14
–
–
–
–
–
–
3/4-16
3/4-16
7/8-14
7/8-14
D
1.95
1.95
2.06
2.06
2.05
2.05
Dimensions (in.)
Exposed
Hex
Largest
Length
Size Diameter
E
1.09
1.09
1.20
1.20
1.18
1.18
F
1.06
1.06
1.06
1.06
1.06
1.06
G
1.23
1.23
1.23
1.23
1.23
1.23
Wt. (LB.)
P/Piece
0.20
0.20
0.20
0.20
0.25
0.25
* Poppet design
F
Replacement Parts - 8200 Series
Body Size (in.)
Part Number
Description
Material
1/2
50005-211-0202
Q-Ring
Nitrile
B-39
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Female Thread
Connect Under Pressure Couplings
Hydraulic Quick Couplings
9200 Series
7
6
B Hydraulics
2
8
4
1
3
Applications
The Parker 9200 lever coupling is designed with a leveroperated cam that opens and closes the valves in both
coupling halves, positively locking them into place. This allows
the couplings to be easily connected and disconnected while
under pressure. The 9200 couplings can functionally replace
a Double Shut-Off quick coupling and two high pressure ball
valves. By simply turning the lever to the “closed” position the
hydraulic lines on a piece of machinery or mobile equipment
may be disconnected either for maintenance or equipment
changeovers.
Note: Protective dust plugs and caps play a crucial role in the
life of a quick coupling and no purchase of a hydraulic quick
coupling is complete without the selection of an appropriate
dust plug and cap. See pages noted in Table of Contents for
dust plugs and caps for the Parker full line of hydraulic
couplings.
Features
1. The lever operates a cam that mechanically locks both
valves into either the “open” or “closed” position.
“Closed,” the flow is shut off at the coupler, allowing easy
zero-pressure connect and disconnect.
“Open,” the valves are locked in the open position in both
coupler and nipple. In this position the valves are
unaffected by hydraulic surges.
2. Parker design eliminates back flow-checking. The positive
lock of the cam prevents hydraulic surges from forcing the
valve closed, which avoids flow checking and disrupting
equipment performance.
3. Valves close automatically if coupling is accidentally
disconnected.
4. The 8010 Series nipples used with the 9200 coupler is an
industry standard that meets ISO, ASAE, and SAE
requirements.
Performance
9200 Series (1/2")
Test Fluid: Oil - 200 SUS
5. Rugged, reliable ball valve and induction hardened locking
ball groove prevent Brinelling and prolong coupling life.
90
6. Turning the lever without the nipple in place will NOT result
in oil flow.
80
70
Pressure Drop in PSID
5
7. The Lever Coupler is covered by patent numbers:
#3680591 and #4009729.
60
8. New easy action sleeve aids connect and disconnect.
50
1/2"
40
30
Specifications
20
10
0
0
2
4
6
8
10
12
14
16
18
Flow in USGPM
B-40
Body Size (in.)
Rated Pressure (PSI)
Rated Flow (GPM)
Temperature Range (std seals)
1/2
3000
12
-40° to +250° F
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Connect Under Pressure Couplings
Hydraulic Quick Couplings
9200 Series
A
Body
Size
(in.)
Part
No.
Steel
Thread
Size
NPTF
Dimensions (in.)
ORB
Overall
Length
Wrench
Flats
Largest
Diameter
Wt. (LB.)
P/Piece
1/2
1/2
1/2
1/2
*1/2
9250-4-320
9250-6-320
9250-15-320
9250-16-320
9250-334
1/2-14
–
–
–
–
–
9/16-18
3/4-16
7/8-14
9/16-18
A
5.37
5.37
5.37
5.37
5.37
B
1.13
1.13
1.13
1.13
1.13
C
1.50
1.50
1.50
1.50
1.50
2.02
2.04
2.06
1.98
2.15
* Mates with the 1/4" 60 Series Nipples.
C
B
Nipples
D
E
G
F
Body
Size
(in.)
Part
No.
Steel
Thread
Size
NPTF
Thread
Size
ORB
Overall
Length
1/2
1/2
1/2
1/2
1/2
1/2
8010-4
8010-4P*
8010-15
8010-15P*
8010-16
8010-16P*
1/2-14
1/2-14
–
–
–
–
–
–
3/4-16
3/4-16
7/8-14
7/8-14
D
1.95
1.95
2.06
2.06
2.05
2.05
Dimensions (in.)
Exposed
Hex
Largest
Length
Size Diameter
E
1.09
1.09
1.20
1.20
1.18
1.18
F
1.06
1.06
1.06
1.06
1.06
1.06
G
1.23
1.23
1.23
1.23
1.23
1.23
Wt. (LB.)
P/Piece
0.20
0.20
0.20
0.20
0.25
0.25
* Poppet design
Replacement Parts
9200 Series
Body Size (in.)
O-Rings - Nitrile
1/2
50001-211-0260
B-41
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Couplers
Connect Under Pressure Couplings
Hydraulic Quick Couplings
5000 Series
Features
The Parker 5000 Series coupling features:
B Hydraulics
• Two-piece coupler body that permits operation while one or
both halves are under pressure as well as when there is no
pressure in either half.
• Connect under pressure by unscrewing the valve body until
two or three threads are visible.
• Nipple can be inserted and locked into the coupler without
opening either valve. (Use a wrench to thread the valve
body back into the coupler, the valves are opened against
internal pressure. If internal pressure makes manual
disconnect difficult, unscrewing the valve body from the
coupler will permit the valves to close, thereby relieving
internal pressure and allowing manual operation of the balllocking sleeve.)
Applications
Performance
The Parker 5000 Series is an economical coupling that is a
threaded union and can be connected under pressure with
tools. For applications that require a coupling to be connected
under-pressure and where tools can be used to make the
connection, the 5000 Series coupling should be considered.
70
60
Pressure Drop in PSID
Note: Protective dust plugs and caps play a crucial role in the
life of a quick coupling and no purchase of a hydraulic quick
coupling is complete without the selection of an appropriate
dust plug and cap. See pages noted in Table of Contents for
dust plugs and caps for the Parker full line of hydraulic
couplings.
5000 Series (1/2")
Test Fluid: Oil - 200 SUS
50
40
1/2"
30
20
10
0
0
2
4
6
8
10
12
14
16
18
Flow in USGPM
Specifications
Body Size (in.)
Rated Pressure (PSI)
Rated Flow (GPM)
Temperature Range (std seals)
1/2
2500
12
-40° to +250°F
B-42
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Connect Under Pressure Couplings
Hydraulic Quick Couplings
5000 Series
Body
Size
(in.)
Part
No.
Steel
Thread
Size
NPTF
Overall
Length
1/2
5050-4
1/2-14
A
2.88
Dimensions (in.)
Wrench
Wrench
Length
Flats
Flats
B
2.32
C
1.06
Largest
Diameter
Wt. (LB.)
P/Piece
E
1.52
2.58
D
1.25
E
C
D
B
A
Nipple
D
E
Body
Size
(in.)
Part
No.
Steel
1/2
1/2
1/2
8010-4
8010-15
8010-16
Thread Dimensions (in.)
Size
NPTF
ORB
1/2-14
–
–
–
3/4-16
7/8-14
Overall
Length
Exposed
Length
Hex
Size
Largest
Diameter
Wt. (LB.)
P/Piece
D
1.95
2.06
2.05
E
1.09
1.20
1.18
F
1.06
1.06
1.06
G
1.23
1.23
1.23
0.20
0.20
0.20
G
F
Replacement Parts
5000 Series
Body Size (in.)
O-Rings - Nitrile
1/2
50001-211-0260
B-43
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Coupler
High Pressure Couplings
Hydraulic Quick Couplings
3000 Series
1
1
B Hydraulics
2
3
5
4
6
Applications
Features
Parker 3000 Series couplings with their threaded union
locking system and precision ball-type check valves, are
designed for extreme high pressure applications such as
found on portable hydraulic rams. See pages noted in Table of
Contents for dust plugs and caps for the Parker full line of
hydraulic couplings.
1. Machined from solid steel barstock for durability.
2. The 3000 Series employs a threaded sleeve locking
mechanism, mates with matching male threads on the
nipple. The two halves must be manually threaded
together for connection.
3. Hard, chrome alloy balls are used for valving. They are
spring loaded for positive seating of the valve.
Note: Protective dust plugs and caps play a crucial role in the
life of a quick coupling and no purchase of a hydraulic quick
coupling is complete without the selection of an appropriate
dust plug and cap. See pages noted in Table of Contents for
hydraulic couplings dust plugs and caps for the full line of
hydraulic couplings.
4. The valve provides a metal-to-metal seal between the ball
and a coined seat.
5. The interface seal is polyurethane which resists high
pressure extrusion.
6. A threaded valve retainer provides a valve stop that
assures positive valve alignment.
Performance
3000 Series (1/4", 3/8")
Test Fluid: Oil - 200 SUS
Specifications
1/4
10,000
3
3/8
10,000
6
160
140
120
-40° to +180°F
Pressure Drop in PSID
Body Size (in.)
Rated Pressure (PSI) Static
Rated Flow (GPM)
Temperature Range (std seals)
3/8"
100
80
1/4"
60
40
20
0
0
1
2
3
4
5
6
7
8
9
Flow in USGPM
B-44
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
High Pressure Couplings
Hydraulic Quick Couplings
3000 Series
Body
Size
(in.)
Part
No.
Thread
Size
NPTF
Overall
Length
1/4
3/8
3/8
3050-2
3050-3
3050-3-231
1/4-18 (Male)
3/8-18 (Male)
3/8-18 (Female)
A
2.38
2.88
2.82
Body
Size
(in.)
Part
No.
Steel
Thread
Size
NPTF
Overall
Length
1/4
3/8
3/8
3010-2
3010-3
3010-3-230
1/4-18 (Female)
3/8-18(Female)
3/8-18 (Male)
D
1.29
1.58
2.31
Dimensions (in.)
Wrench
Largest
Flats
Diameter
B
0.81
1.00
1.00
C
1.13
1.38
1.38
Wt. (LB.)
P/Piece
0.25
0.49
0.49
A
C
B
Nipples
D
E
Dimensions (in.)
Expose
Hex
Length
Size
E
0.48
0.50
1.23
F
0.75
0.94
1.00
Largest
Diameter
Wt. (LB.)
P/Piece
G
1.13
1.25
1.25
0.14
0.23
0.30
G
F
B-45
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Couplers
High Pressure Couplings
TC Series
Hydraulic Quick Couplings
Features
• Positive valve stop. The perch maintains valve alignment
and provides metal to metal valve stop to insure that the
valves open full–every time.
B Hydraulics
• Precision machined valves with elastomeric seals provide
for positive shut-off upon disconnection.
• Hardened nipples and sleeves and solid barstock
construction make for a quality coupling with maximum
resistance to damage from hydraulic and mechanical shock.
• Durable ball-locking mechanism assures reliable
connection every time. A large number of locking balls distributes the work load evenly while providing alignment and
swiveling action to reduce hose torque and prolong hose
life. CAUTION: These products are not to be used as
swivels, rotation under pressure will result in excessive and
premature wear.
Specifications
Body Size (in.)
Rated Pressure (PSI)
Rated Flow (GPM)
Temperature Range (std seals)
Performance
• Female pipe (NPSF) standard.
3/8
10,000
6
-15° to +400°F
• The standard Fluorocarbon seal is designed to withstand
extremely high pressures and provide reliable sealing.
PTFE back-up ring provides support for the seal in high
pressure applications.
• Sleeve locking mechanism prevents accidental disconnection when the coupling is dragged along the ground.
TC Series (3/8")
Test Fluid: Oil - 200 SUS
• Steel construction, zinc plated with yellow chromate finish
for corrosion resistance.
100
90
Pressure Drop in PSID
80
Applications
70
Parker TC series couplings are found in the construction,
railway maintenance and house moving industries. Used on
hydraulic jacking equipment, these couplers eliminate costly
down time caused by improperly connected threaded types.
For use where high pressure capability is required coupled
with positive coupling action. Considerably faster to use than
threaded types.
60
50
3/8"
40
30
20
10
0
0
1
2
3
4
5
6
7
8
Note: Protective dust plugs and caps play a crucial role in the
life of a quick coupling and no purchase of a hydraulic quick
coupling is complete without the selection of an appropriate
dust plug and cap. See pages noted in Table of Contents for
dust plugs and caps for the Parker full line of hydraulic
couplings.
9
Flow in USGPM
Coupler
C
B
Body
Size
(in.)
Part
No.
Fitting
Thread
Size
Overall
Length
3/8
TC-371
3/8-18 NPSF
A
2.48
Dimensions (in.)
Hex
Largest Wt. (LB.)
Size
Diameter P/Piece
B
0.94
C
1.25
0.43
A
Nipple
G
F
D
E
Body
Size
(in.)
Part
No.
Fitting
Thread
Size
Overall
Length
3/8
TC-372
3/8-18 NPSF
D
1.82
Dimensions (in.)
Exposed
Hex
Largest
Length
Size
Diameter
E
0.66
F
0.94
Wt. (LB.)
P/Piece
G
1.08
0.14
NPSF – National Pipe Straight Fuel
B-46
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
High Pressure Couplings
Hydraulic Quick Couplings
1141 Series
Coupler
Part
No.
Thread
Size
NPTF
1/4
1141-62
1/4-18
Dimensions
(in.)
A
2.75
Wt. (LB.)
P/Piece
B
1.00
0.40
A
B
Applications
The 1141 Series is a general purpose coupling for
high pressure connect-under-pressure applications.
Nipple
Features
• 303 Stainless steel body.
• Brass locking sleeve
Body
Size
(in.)
Part
No.
Thread
Size
NPTF
1/4
1141-63
1/4-18
Dimensions
(in.)
C
2.00
Wt. (LB.)
P/Piece
D
.88
0.26
C
• Polyurethane seals to resist extrusion and abrasion.
• Self locking threads help prevent coupling from accidentally
disconnecting.
• Visual makeup – when fully coupled the edge of the sleeve
will be flush with the end of the male thread – giving a
visual check for complete coupling.
D
• Small diameter mating seal helps keep separation forces to
a minimum, allowing for easier connect and disconnect at
pressures up to 5,000 PSI.
• 10,000 PSI working pressure, 17,000 PSI intermittent
pressure.
• Dust caps and plugs included.
Specifications
Body Size (in.)
1/4
Rated Pressure (PSI)
10,000
Rated Connect-Under-Pressure Capability (PSI)
5000
Rated Flow (GPM)
3
Temperature Range (Polyurethane seals)
-30° to +180°F
Vacuum test
20 in/Hg
Torque to connect at 1000 PSI
47 in/lbs.
B-47
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Body
Size
(in.)
Mold Coolant Line Couplings
Hydraulic Quick Couplings
Moldmate Series
Applications
B Hydraulics
Parker moldmate couplings are specifically designed for connecting coolant lines to molds and dies, on injection molding
machinery in the plastics and die casting industries.
Moldmate couplings significantly reduce machine downtime
by providing fast and easy connection of coolant lines during
mold changes. Their short nipples can be recessed below the
surface of the mold for more efficient storage of molds.
Moldmate couplers are available with or without valves in the
female half. Non-valved couplers provide maximum flow for
efficient cooling. Valved couplers shut off when disconnected.
Special Order Information
Standard seal material is Silicone and is compatible with
water and water glycol fluids commonly used in heat transfer
systems. Fluorocarbon seals are available for use only with
oil-based media and not with water glycol. To specify a
Fluorocarbon seal, add the suffix “Y” to the standard
moldmate part number, thus: PC206Y.
Selection Guidelines
Specifications
Moldmate couplings are designed for a maximum working
pressure of 200 PSI. Most thermoplastic and thermoset heat
transfer systems have pumps which provide relatively high
flow rates at relatively low pressures. Water and water glycol
systems usually have capacities ranging from 10 to 40 gpm,
with most from 10 to 15 gpm. Normal medial opening
pressures are 20 to 60 PSI for these systems. Heat transfer
systems using oil generally operate from 10 to 30 PSI.
However, their flow rates are usually much higher, requiring
the total volume of oil to be circulated at least once per
minute.
Body Size (in.)
1/4
3/8
1/2
Rated Pressure (PSI)
200
200
200
3
6
12
Rated Flow (GPM)
Material
Standard Silicone seal
*Optional Fluorocarbon seal
* For use with oil based media only
Temperature Range
-90˚ to +400˚F
-15˚ to +400˚F
Performance
The number of hose connections in a single mold system
results in a cumulative pressure drop. Please note the
Pressure Drop vs. Flow Rate chart provided, to select the
appropriate size.
Moldmate Series (1/4", 3/8", 1/2")
Test Fluid: Water (Straight Coupler)
50
45
1/4" Valved
Temperature is another important consideration. Parker
moldmate couplings with their standard Silicone seal have a
temperature capability of -90° to +400°F. Rapid deterioration
of the seal and leakage may result if used beyond these
limits.
External conditions of temperature, corrosive atmospheres,
and other abnormalities may affect coupling performance and
must be considered when selection is made. Consult factory
with questions.
Pressure Drop in PSID
40
3/8" Valved
35
30
1/4" Non-valved
25
20
3/8" Non-valved
15
1/2" Non-valved
10
5
0
0
2
4
6
8
10
12
14
16
18
Flow in USGPM
B-48
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Mold Coolant Line Couplings
Hydraulic Quick Couplings
Moldmate Series
1. Available with or without valves in the coupler. Non-valved
couplers have minimum flow resistance for maximum
cooling. Valved couplers shut off automatically upon
disconnect. Valved couplers can be used with either valved
or non-valved nipples. A valved nipple, however, must be
used with a valved coupler.
4
2. Nipples are designed to be recessed below mold surfaces
to provide more efficient storage of molds and prevent
damage to the nipple.
3
3. Widest choice of end fittings available, including straight,
45° or 90° with standard hose barb or Push-Lok barbs for
easy installation.
1
2
4. Couplers and nipples are made of corrosion resistant
brass, and valved couplers or valved nipple have a
Fluorocarbon O-ring on poppet and Silicone interface seal
as standard for use with water glycol type fluids commonly
used in heat transfer systems.
5. Silver colored sleeve designates valved coupler.
Couplers
Body Part No.
Size
Brass
(in.) Non-valved
Straight
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
A
C
B
PC204
PC204-BP*
PC205
PC206
PC206-BP*
PC306
PC306-BP*
PC308
PC308-BP*
PC504
PC504-BP*
PC506
PC506-BP*
Wt. (LB.)
P/Piece
Part No.
Brass
Valved
0.10
PC204AV
0.10 PC204AV-BP
0.09
PC205AV
0.09
PC206AV
0.11 PC206AV-BP
0.24
PC306V
0.26 PC306V-BP
0.25
PC308V
0.25 PC308V-BP
0.46
NA
0.50
NA
0.48
NA
0.52
NA
Wt. (LB.) Hose
P/Piece
I.d.
0.10
0.10
0.10
0.10
0.13
0.27
0.29
0.28
0.03
–
–
–
–
1/4
1/4
5/16
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
3/4
3/4
Overall
Length
Dimensions (in.)
Largest
Overall Hex Largest
Diameter
Length Size Diameter
Non-valved
A
C
1.87
0.63
1.89
0.63
1.87
0.63
1.87
0.63
2.04
0.63
3.01
0.96
3.15
0.96
3.15
0.96
3.27
0.96
3.55
1.30
3.68
1.21
3.80
1.21
3.80
1.21
A
2.67
2.52
2.67
2.67
2.70
3.17
3.31
3.17
3.43
Valved
B
0.56
0.56
0.56
0.56
0.56
0.88
0.88
0.88
0.88
–
–
–
–
C
0.71
0.71
0.71
0.71
0.71
0.96
0.96
0.96
0.96
NA = Not Available
45 Degree
Body Part No.
Size
Brass
(in.) Non-valved
A
C
B
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
PC224
PC224-BP*
PC225
PC226
PC226-BP*
PC326
PC326-BP*
PC328
PC328-BP*
PC524
PC524-BP*
PC526
PC526-BP*
Wt. (LB.)
P/Piece
Part No.
Brass
Valved
0.13
PC224AV
0.13 PC224AV-BP
0.13
PC225AV
0.13
PC226AV
0.26 PC226AV-BP
0.36
PC326V
0.34 PC326V-BP
0.36
PC328V
0.34 PC328V-BP
0.74
NA
0.78
NA
0.76
NA
0.80
NA
Wt. (LB.) Hose
P/Piece
I.D.
0.13
0.14
0.13
0.14
0.17
0.36
0.36
0.36
0.40
–
–
–
–
1/4
1/4
5/16
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
3/4
3/4
Dimensions (in.)
Overall Hex Largest Overall Hex Largest
Length Size Diameter Length Size Diameter
Non-valved
A
B
C
2.67 0.56 0.71
2.57 0.56 0.71
2.69 0.56 0.71
2.71 0.56 0.71
2.74 0.56 0.71
3.65 0.88 0.96
3.75 0.88 0.96
3.69 0.88 0.96
3.88 0.88 0.96
4.18 1.12 1.21
4.28 1.12 1.21
4.56 1.12 1.21
4.56 1.12 1.21
A
2.87
2.77
2.89
2.91
2.94
3.65
3.75
3.69
3.88
Valved
B
0.56
0.56
0.56
0.56
0.56
0.88
0.88
0.88
0.88
–
–
–
–
C
0.71
0.71
0.71
0.71
0.71
0.96
0.96
0.96
0.96
* Suffix BP in part number denotes Push-Lok hose barb. Without suffix denotes standard hose barb.
Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps.
Valved Couplers can be used with either non-valved or valved nipples.
B-49
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Features
Mold Coolant Line Couplings
Hydraulic Quick Couplings
90 Degree
Moldmate Series
B Hydraulics
Body Part No.
Size
Brass
(in.) Non-valved
A
C
B
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
PC214
PC214-BP*
PC215
PC216
PC216-BP*
PC316
PC316-BP*
PC318
PC318-BP*
PC514
PC514-BP*
PC516
PC516-BP*
Wt. (LB.)
P/Piece
Part No.
Brass
Valved
Dimension (in.)
Dimensions (in.)
Overall Hex Largest Overall Hex Largest
Length Size Diameter Length Size Diameter
Wt. (LB.) Hose
P/Piece
I.D.
0.13
PC214AV
0.14 PC214AV-BP
0.13
PC215AV
0.14
PC216AV
0.16 PC216AV-BP
0.31
PC316V
0.37 PC316V-BP
0.33
PC318V
0.37 PC318V-BP
0.79
NA
0.83
NA
0.80
NA
0.84
NA
0.14
0.14
0.14
0.15
0.17
0.31
0.37
0.35
0.39
–
–
–
–
Non-valved
A
B
C
1.78 0.56 0.71
1.78 0.56 0.71
1.78 0.56 0.71
1.78 0.56 0.71
1.80 0.56 0.71
2.78 0.88 0.96
2.78 0.88 0.96
2.78 0.88 0.96
2.80 0.88 0.96
3.50 1.12 1.21
3.50 1.12 1.21
3.50 1.12 1.21
3.50 1.12 1.21
1/4
1/4
5/16
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
3/4
3/4
A
1.98
1.98
1.98
1.98
2.00
2.78
2.78
2.78
2.80
Valved
B
0.56
0.56
0.56
0.56
0.56
0.88
0.88
0.88
0.88
–
–
–
–
C
0.71
0.71
0.71
0.71
0.71
0.96
0.96
0.96
0.96
* Suffix BP in part number denotes Push-Lok hose barb. Without suffix denotes standard hose barb.
Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps.
Valved Couplers can be used with either non-valved or valved nipples.
Sub Assemblies
and Individual
Replacement Parts
A
Non-valved Sub-assembly (Brass Sleeve)
Body
Size (in.)
Part No.
Brass
For No-valving
Wt. (LB.)
P/Piece
Thread
Size
NPTF
1/4
3/8
3/8
1/2
P208-01A
P308-01A
P308-01A-HF
PC500
0.07
0.21
0.20
0.34
1/8-27
1/4-18
3/8-18
1/2-14
Dimensions (in.)
Overall
Hex
Largest
Length
Size
Diameter
A
1.15
1.84
1.84
2.02
B
0.56
0.88
0.88
1.12
C
0.71
0.96
0.96
1.21
C
Valved* Sub-assembly (Silver Colored Sleeve)
B
Body
Size (in.)
Part No.
Brass
For Valving
Wt. (LB.)
P/Piece
Thread
Size
NPTF
Dimensions (in.)
Overall
Hex
Largest
Length
Size
Diameter
1/4
3/8
P201-01A
P301-01A
0.07
0.21
1/8-27
1/4-18
A
1.35
1.84
B
0.56
0.88
C
0.71
0.96
*Bodies are designed for use with valves retained by a male pipe fitting (i.e. hose barb). Order valves and valve springs seperately.
Valve Springs (for Valved Sub-assembly)
Valves (for Valved Sub-assembly)
Body Size (in.)
Part No.
Material
Body Size (in.)
Part No.
Material
1/4
3613001
Brass
1/4
7820123
Stainless
3/8
P300-11S
Brass
3/8
P300-6
Stainless
Replacement Seals (for both Valved and Non-valved)
Seal Material
* Silicone
* Fluorocarbon
Body Size (in.)1/4
P200-9A
P200-9AY
Body Size (in.)3/8
P300-9A
P300-9AY
Body Size (in.)1/2
P500-9A
—
* Please note: Bulk seals are considered to be non-returnable.
Assembly Instruction Sheet (for all sizes & configurations)
Order Part Number 9090065
B-50
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Mold Coolant Line Couplings
Hydraulic Quick Couplings
Moldmate Series
Nipples
D
E
G
Body
Size
(in.)
Part
No.
Brass
Wt. (LB.)
P/Piece
Brass
Part
No.
Steel
Wt. (LB.)
P/Piece
Steel
Thread
Size
NPTF
1/4
1/4
1/4
3/8
3/8
BPN251F
BPN252F
BPN253F
BPN352F
BPN353F
0.02
0.05
0.08
0.05
0.07
PN251F
PN252F
PN253F
PN352F
PN353F
0.02
0.04
0.08
0.05
0.06
1/8-27
1/4-18
3/8-18
1/4-18
3/8-18
Dimensions (in.)
Overall **Exposed Hex
Length
Length
Size
D
0.97
1.28
1.41
1.48
1.58
E
0.58
0.89
1.02
0.88
0.98
Largest
Diameter
F
0.50
0.63
0.75
0.63
0.75
G
0.58
0.72
0.87
0.72
0.87
Male Pipe Thread
D
E
G
A
F
B
Male Nipple
Installation
Body
Size
(in.)
Part
No.
Brass
Wt. (LB.)
P/Piece
Brass
Part
No.
Steel
Wt. (LB.) Thread
P/Piece
Size
Steel
NPTF
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
PN250
PN251
PN252
PN253
PN352
PN353
PN354
PN553
PN554
PN556
0.02
0.02
0.03
0.05
0.04
0.06
0.12
0.12
0.11
0.16
–
PN251S
PN252S
PN253S
PN352S
PN353S
NA
NA
NA
NA
–
0.02
0.03
0.05
0.04
0.06
–
–
–
–
1/16-27
1/8-27
1/4-18
3/8-18
1/4-18
3/8-18
1/2-14
3/8-18
1/2-14
3/4-14
Dimensions (in.)
Overall **Exposed Hex
Length Length
Size
D
0.94
0.94
1.13
1.19
1.34
1.38
1.59
1.53
1.70
1.75
E
0.54
0.54
0.74
0.79
0.74
0.78
0.99
0.77
0.94
0.99
F
0.44
0.44
0.56
0.69
0.56
0.69
0.88
0.88
0.88
1.06
Installation
Largest Recess
Dia.
Dia.
Depth
G
0.51
0.51
0.67
0.79
0.65
0.79
1.01
1.01
1.01
1.23
A
0.69
0.69
0.84
1.00
1.00
1.00
1.19
1.25
1.25
1.50
B
0.69
0.69
0.94
0.94
1.09
1.13
1.25
1.34
1.50
1.56
Valved Nipple
Body
Size
(in.)
D
E
Part
No.
Brass
Thread
Size
NPTF
Overall
Length
Dimensions (in.)
**Exposed Hex
Largest
Length
Size
Dia.
Installation
Recess
Dia.
Depth
1/4 BPV252*
1/4-18
D
1.21
E
0.82
F
.56
G
0.67
A
0.84
B
0.94
0.03
3/8 BPV353*
3/8-18
1.48
0.88
.69
0.79
1.00
1.23
0.07
Wt. (LB.)
P/Piece
*Valved Nipple must be used with Valved Coupler.
**This dimension represents the portion of the nipple that is exposed when inserted into a moldmate coupler.
G
F
B-51
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Female Pipe Thread
Mold Coolant Line Couplings
Hydraulic Quick Couplings
B Hydraulics
Moldmate Extension Nipples
D
E
G
F
Moldmate Series
Body
Size
(in.)
Part
No.
Brass
Thread
Size
NPTF
Overall
Length
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
PN250-25
PN250-40
PN250-55
PN251-25
PN251-40
PN251-55
PN251-70
PN251-85
PN252-25
PN252-40
PN252-55
PN252-70
PN252-85
PN351-25
PN351-40
PN351-55
PN351-70
PN351-85
PN352-25
PN352-40
PN352-55
PN352-70
PN352-85
PN353-25
PN353-40
PN353-55
PN353-70
PN353-85
1/16-27
1/16-27
1/16-27
1/8-27
1/8-27
1/8-27
1/8-27
1/8-27
1/4-18
1/4-18
1/4-18
1/4-18
1/4-18
1/8-27
1/8-27
1/8-27
1/8-27
1/8-27
1/4-18
1/4-18
1/4-18
1/4-18
1/4-18
3/8-18
3/8-18
3/8-18
3/8-18
3/8-18
D
2.50
4.00
5.50
2.50
4.00
5.50
7.00
8.50
2.50
4.00
5.50
7.00
8.50
2.50
4.00
5.50
7.00
8.50
2.50
4.00
5.50
7.00
8.50
2.50
4.00
5.50
7.00
8.50
B-52
Dimensions (in.)
Hex
Length
Size
E
.69
.81
.81
.69
1.00
1.00
1.00
1.00
.88
1.25
1.25
1.25
1.25
.88
1.00
1.00
1.00
1.00
.88
1.25
1.25
1.25
1.25
1.00
1.25
1.25
1.25
1.25
F
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
11/16
11/16
11/16
11/16
11/16
Wt.
Largest (LB.)
Dia.
P/Piece
G
0.43
0.43
0.43
0.51
0.51
0.51
0.51
0.51
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.79
0.79
0.79
0.79
0.79
0.04
0.06
0.09
0.06
0.10
0.13
0.17
0.21
0.09
0.15
0.22
0.27
0.33
0.07
0.11
0.15
0.18
0.22
0.09
0.15
0.21
0.27
0.33
0.12
0.20
0.28
0.37
0.45
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
High Flow Couplings
Hydraulic Quick Couplings
ST Series
The Parker ST Series are non-valved couplings for applications
where maximum flow is required. Their smooth, open bore
offers the lowest pressure drop of any quick coupling design
and is ideal for applications such as high-pressure water and
steam washers, carpet cleaners and mold coolant lines and
many other non-valved applications.
Specifications
Body Size (in.)
1/8
Rated Pressure (PSI)
Brass Cplr/Npl
2500
Brass Cplr/Steel Npl 2600
SS Cplr/Npl
4200
Rated Flow
3
Temperature Range (std seals)
1/4
3/8
1/2
3/4
1
1 1/4 1 1/2
5200 2700 2200 1700 1200 1700 1400
5500 3500 2700 2700 2000
–
–
6700 5500 3000 3000 1700
–
–
6
12
12
28
50
76 100
-40° to +250°F
Performance
ST Series (1/8", 1/4", 3/8", 1/2")
Test Fluid: Oil - 150 SUS
ST Series (3/4", 1", 1-1/4")
Test Fluid: Oil - 150 SUS
12
5
1"
1/8"
Pressure Drop in PSID
Pressure Drop in PSID
10
8
6
3/8"
1/2"
4
1/4"
4
1-1/4"
3/4"
3
2
1
2
0
0
0
2
4
6
8
10
12
14
16
18
0
Flow in USGPM
20
40
60
80
100
Flow in USGPM
B-53
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Applications
High Flow Couplings
Hydraulic Quick Couplings
ST Series
Features
B Hydraulics
• The smooth, open bore with no valving in either half offers
minimal pressure drop and allows easy cleaning in applications where the same lines are used for more than one
media.
• ST couplers and nipples are machined from solid barstock,
providing a quality coupling that is durable. ST couplers are
available in brass and 303 stainless steel as standard
product materials.
• ST nipples are available in 303 stainless steel, brass and
zinc-plated steel. The ball locking grooves of the steel ST
nipples are case hardened for resistance to brinelling
where high cycle rates and pressure surges are
encountered.
• The ST is an "Interchange" coupling since it dimensionally
and functionally interchanges with similar couplings made
by other manufacturers.
Special Order Information
All sizes of ST Series can be furnished with locking sleeves.
Place suffix letters “SL” (Sleeve-Lok) after regular catalog
numbers. Example: SST-4MSL. Standard seal material is
Nitrile. Ethylene Propylene, Fluorocarbon, or Neoprene seals
are available upon request. See Fluid Compatibility Chart for
recommendations.
Couplers
Female Pipe Thread
A
C
Body
Size
(in.)
Part No.
Brass
Wt. (LB.)
P/Piece
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
BST-1
BST-2
BST-3
BST-4
BST-6
BST-8
BST-10
BST-12
0.06
0.17
0.26
0.59
0.62
0.99
1.38
1.42
Body
Size
(in.)
Part No.
Brass
Wt. (LB.)
P/Piece
1/8
1/4
3/8
1/2
3/4
1
BST-1M
BST-2M
BST-3M
BST-4M
BST-6M
BST-8M
0.05
0.16
0.25
0.34
–
0.85
Part No.
Type 303 Wt. (LB.)
Stainless P/Piece
SST-1
SST-2
SST-3
SST-4
SST-6
SST-8
–
–
0.05
0.15
0.24
0.37
0.57
0.93
–
–
Thread
Size
NPTF
Overall
Length
1/8-27
1/4-18
3/8-18
1/2-14
3/4-14
1-11 1/2
1 1/4-11 1/2
1 1/2-11 1/2
A
1.06
1.54
1.59
1.98
2.15
2.43
2.44
2.88
Thread
Size
NPTF
Overall
Length
1/8-27
1/4-18
3/8-18
1/2-14
3/4-14
1-11 1/2
A
1.06
1.69
1.75
1.94
2.17
2.53
Dimensions (in.)
Wrench
Largest
Flats
Diameter
B
0.56
0.81
1.00
1.13
1.44
1.75
2.00
2.50
C
0.69
0.94
1.16
1.30
1.66
2.02
2.51
3.00
B
Male Pipe Thread
A
C
Part No.
Type 303 Wt. (LB.)
Stainless P/Piece
SST-1M
SST-2M
SST-3M
SST-4M
SST-6M
SST-8M
0.05
0.16
0.21
0.31
0.49
0.08
Dimensions (in.)
Wrench
Largest
Flats
Diameter
B
0.56
0.81
1.00
1.13
1.44
1.75
C
0.69
0.81
1.16
1.30
1.66
2.02
B
B-54
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
High Flow Couplings
Hydraulic Quick Couplings
ST Series
D
Nipples
E
Female Pipe Thread
F
Body
Size
(in.)
Part
No.
Brass
Wt. (LB.)
P/Piece
Part
No.
Steel
Wt. (LB.)
P/Piece
Part No.
Type 303
Stainless
Wt. (LB.)
P/Piece
Thread
Size
NPTF
Dimensions (in.)
Overall Exposed
Hex
Length
Length
Size
1/8
1/4
3/8
BST-N1
BST-N2
BST-N3
0.03
0.07
0.12
ST-N1
ST-N2
ST-N3
0.03
0.07
0.11
SST-N1
SST-N2
SST-N3
0.02
0.07
0.11
1/8-27
1/4-18
3/8-18
D
.98
1.46
1.62
E
0.57
0.74
0.96
F
0.56
0.75
.088
G
0.65
0.87
1.59
1/2
3/4
1
1 1/4
1 1/2
BST-N4
BST-N6
BST-N8
BST-N10
BST-N12
0.23
0.33
0.52
0.85
1.45
ST-N4
ST-N6
ST-N8
–
–
0.21
0.32
0.49
–
–
SST-N4
SST-N6
SST-N8
–
–
0.21
0.32
0.48
–
–
1/2-14
3/4-14
1-11 1/2
1 1/4-11 1/2
1 1/2-11 1/2
1.85
2.15
2.35
2.38
2.81
0.95
1.09
1.18
1.11
1.17
1.13
1.38
1.63
2.00
2.38
1.30
1.59
1.88
2.31
2.74
Largest
Dia.
D
Nipples
E
Male Pipe Thread
G
F
Body
Size
(in.)
Part
No.
Brass
Wt. (LB.)
P/Piece
Part
No.
Steel
Wt. (LB.)
P/Piece
Part No.
Type 303
Stainless
Wt. (LB.)
P/Piece
Thread
Size
NPTF
Dimensions (in.)
Overall Exposed
Hex
Length
Length
Size
1/8
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
BST-N1M
BST-N2M
BST-N3M
BST-N4M
BST-N6M
BST-N8M
BST-N10M
BST-N12M
0.02
0.06
0.08
0.15
0.23
0.46
0.96
1.46
ST-N1M
ST-N2M
ST-N3M
ST-N4M
ST-N6M
ST-N8M
–
–
0.02
0.05
0.07
0.13
0.21
0.43
–
–
SST-N1M
SST-N2M
SST-N3M
SST-N4M
SST-N6M
SST-N8M
–
–
0.02
0.05
0.08
0.13
0.22
0.43
–
–
1/8-27
1/4-18
3/8-18
1/2-14
3/4-14
1-11 1/2
1 1/4-11 1/2
1 1/2-11 1/2
D
1.04
1.53
1.69
1.94
2.19
2.51
2.85
3.25
E
0.63
0.81
0.86
1.01
1.11
1.34
1.60
1.59
F
0.44
0.56
0.69
0.88
1.06
1.38
1.88
2.13
Largest
Dia.
G
0.51
0.65
0.79
1.01
1.23
1.59
2.17
2.45
Replacement Parts
ST Series
Body Size (in.)
ST Series O-Rings
Standard Nitrile*
1/8
1/4
3/8
1/2
50001-010-0010
50001-110-0010
50001-112-0010
50001-114-0010
3/4
1
1-1/4
1-1/2
50001-212-0010
50001-217-0010
50001-221-0010
50001-327-0010
Body Size (in.)
ST Series O-Rings
Standard Nitrile*
* Other compounds available are Ethylene Propylene, Fluorocarbon, Neoprene (Contact the division for compound availability)
B-55
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
G
High Flow Couplings
Hydraulic Quick Couplings
Water Service Series
Applications
B Hydraulics
Parker Water Service Couplings are used anywhere water
hoses are connected and disconnected frequently. They are
used on a wide variety of applications including garden
hoses, wash down systems, and mobile water tank lines. The
unvalved design permits maximum flow with minimum
pressure drop.
Features
Specifications
Body Size (in.)
Rated Pressure (PSI)
Rated Flow (GPM)
Temperature Range (std seals)
3/4"
200
28
-40°F to +250°F
• Brass and stainless steel construction for heavy duty
service.
• Durable 4-ball locking mechanism for secure connections.
• Quality, temperature-resistant Nitrile seals for a leak-free
service life.
Coupler
A
C
Nipple
Body
Size (in.)
Part
No.
Thread Size
NH
Overall Length
A
Largest Diameter
C
Wt. (LB.)
P/Piece
3/4
1163-60
3/4-11 1/2
1.16
1.21
0.12
Body
Size (in.)
Part
No.
Thread Size
NH
Overall Length
D
Exposed Length
E
Wt. (LB.)
P/Piece
3/4
1163-61
3/4-11 1/2
1.25
.50
0.08
D
E
B-56
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
High Flow Couplings
Hydraulic Quick Couplings
HO Series
HO Series couplings are used in a wide variety of
applications. HO couplings are used in refineries, petrochemical plants and paper and pulp mills for connecting
hose lines for high pressure hydro-blasting of boilers and
pipe lines. They are also used in oil fields on hose lines
for internal and external pressure testing of tubing.
Note: Protective dust plugs and caps play a crucial role
in the life of a quick coupling and no purchase of a
hydraulic quick coupling is complete without the selection
of an appropriate dust plug and cap. See pages noted in
Table of Contents for hydraulic couplings dust plugs and
caps for the full line of hydraulic couplings.
Features
Specifications
Body Size (in.)
1/4
Rated Pressure (PSI)
15,000
Rated Flow (GPM)
3
Temperature Range (std seals)
3/8
15,000
6
-40° to +250°F
1/2
10,000
12
• For high pressure applications: working pressures to 15,000
PSI (1,050 Bar) for the 1/4” and 3/8” sizes; to 10,000 PSI
(700 Bar) for the 1/2” size.
• No internal valving to restrict flow.
• Made of steel with electroless nickel plating for corrosion
resistance.
• Standard sleeve-lock feature which helps prevent accidental
disconnect.
• Standard Nitrile Body O-Ring. Backed up by PTFE washer
to prevent seal extrusion.
Couplers
Body
Size
(in.)
Part
No.
Thread
Size
NPSF
1/4
3/8
1/2
HO-251-4FP
HO-371-6FP
HO-501-8FP
1/4-18
3/8-18
1/2-14
Dimensions (in.)
Overall
Hex
Length
Size
C
B
A
1.67
1.67
2.03
B
0.94
0.94
1.25
Largest Wt. (LB.)
Diameter P/Piece
C
1.06
1.06
1.62
0.24
0.22
0.52
A
Nipples
Body
Size
(in.)
Part
No.
Thread
Size
NPSF
Overall
Length
1/4
3/8
1/2
HO-252-4FP
HO-372-6FP
HO-502-8FP
1/4-18
3/8-18
1/2-14
D
1.40
1.44
2.03
G
F
E
D
Dimensions (in.)
Exposed
Hex
Length
Size
E
0.66
0.70
0.86
F
0.81
0.94
1.12
Largest
Diameter
Wt. (LB.)
P/Piece
G
0.94
1.08
1.30
0.10
0.12
0.26
NPSF – National Pipe Straight Fuel
B-57
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Applications
Special Purpose–Double Shut-Off
Hydraulic Quick Couplings
DM Series
Applications
B Hydraulics
Typical applications include dental equipment, lubrication
equipment, fluid transfer and coolant lines.
Specifications
Body Size (in.)
Temperature Range
Rated Pressure
Locking Device
Rated Flow (GPM)
1/8"
-15°F to +400°F
250 PSI
5 Balls
0.8
How To Order
DM - 12 1 - 4 FP
Features
FP= Female NPT
MP= Male MPT
• Parker DM Series offer double shut-off valving and push-toconnect operation in a small envelope size.
Port Size (1/16 of a inch)
• They are constructed of nickel plated brass and are
available in 1/8" body size only.
• Standard seals are Fluorocarbon, but other seal material is
available upon request. See the Coupling Selection and
Ordering Information Guide at the beginning of Section A
and the Fluid Compatibility Chart at the end of this catalog
for optional materials.
1= Valved Coupler
2= Valved Nipple
1/8" Body Size
Performance
DM Series (1/8")
Test Fluid: Water
DM Series
12
Pressure Drop in PSID
10
8
6
1/8"
4
2
0
0
0.2
0.4
0.6
0.8
1
1.2
Flow in USGPM
B-58
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Special Purpose–Double Shut-Off
Hydraulic Quick Couplings
DM Series
Female Pipe Thread
Body
Size
(in.)
A
C
1/8
1/8
New
Part
No.
Old
Part
No.
Thread
Dimensions (in.)
Size Overall Hex Largest Wt. (LB)
NPTF Length Size Diameter P/Price
A
DM-121-2FP CDM02-2-2Y 1/8-27 1.42
DM-121-4FP CDM02-2-4Y 1/4-18 1.81
B
0.55
0.67
C
0.63
0.78
.06
.10
B
Male Pipe Thread
Body
Size
(in.)
A
New
Part
No.
Old
Part
No.
Thread
Dimensions (in.)
Size Overall
Hex Largest Wt. (LB)
NPTF Length Size Diameter P/Price
C
1/8 DM-121-2MP CDM01-2-2Y
1/8 DM-121-4MP CDM01-2-4Y
A
1/8-27 1.50
1/4-18 1.61
B
0.55
0.55
C
0.63
0.63
.06
.07
B
Nipples
Female Pipe Thread
Body
Size
(in.)
D
E
F
G
Male Pipe Thread
Old
Part
No.
Thread
Dimensions (in.)
Size Overall Exposed Hex Largest Wt. (lb)
NPTF Length Length* Size Diameter P/Price
1/8 DM-122-2FP NDM02-2-2Y 1/8-27
1/8 DM-122-4FP NDM02-2-4Y 1/4-18
D
1.56
1.97
E
F
1.03 0.55
1.44 0.67
G
0.63
0.78
.05
.09
* This dimension represents the portion that is exposed when a nipple is inserted into a Parker
DM Series coupler.
Body
Size
(in.)
D
E
G
F
New
Part
No.
New
Part
No.
Old
Part
No.
Thread
Dimensions (in.)
Size Overall Exposed Hex Largest Wt. (lb)
NPTF Length Length* Size Diameter P/Price
D
1/8 DM-122-2MP NDM01-2-2Y 1/8-27 1.65
1/8 DM-122-4MP NDM01-2-4Y 1/4-18 1.77
E
F
1.12 0.55
1.24 0.55
G
0.63
0.63
.05
.06
* This dimension represents the portion that is exposed when a nipple is inserted into a Parker
DM Series coupler.
B-59
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
Couplers
Dust Plugs and Dust Caps
Hydraulic Quick Couplings
B Hydraulics
Applications
Parker offers a complete line of dust plugs and caps for their
hydraulic quick couplings. Each series shown in this catalog
has a dust plug and cap specifically designed to be used with
that style of coupling.
Dust plugs and caps serve a twofold function. They keep the
mating surface clean and free of contamination and protect
the critical mating elements of the coupling halves when they
are disconnected. In this way the nipple is protected from
damage that would make the total coupling unusable.
Protective dust plugs and caps play a crucial role in the use of
quick couplings and no purchase of a hydraulic quick coupling
is complete without the selection of an appropriate dust plug
and cap. When ordering the dust cap/plug body size must
correspond to that of the coupler or nipple.
Parker’s full line of dust plugs and caps can be found below
and on the following pages.
Dust Plug:
Used on Coupler (female half)
Dust Cap:
Used on Nipple (male half)
Dust Plugs
60 Series
Body
Size
(in.)
Dust Plug
Part No.
Aluminum
Dust Plug
Part No.
Rubber
Dust Cap
Part No.
Aluminum
Dust Cap
Part No.
Rubber
1/8
1/4
3/8
1/2
3/4
1
1 1/2
2 1/2
H1-65
H2-65
H3-65
H4-65
H6-65
H8-65
H12-65
H20P-65
H1-65M
H2-65M
H3-65M
H4-65M
H6-65M
H8-65M
NA
NA
H1-66
H2-66
H3-66
H4-66
H6-66
H8-66
H12-66
H20P-66
H1-66M
H2-66M
H3-66M
H4-66M
H6-66M
H8-66M
NA
NA
NA = Not Available
6600 Series
SM Series
B-60
Body
Size
(in.)
Dust Plug
Part No.
Rubber
Dust Cap
Part No.
Rubber
1/4
3/8
1/2
3/4
1
H1-65M
TR-37
5205-4M
6659-12M
6659-16M
H1-66M
TR-37
5209-4M
6657-12M
6657-16M
Body Size
(in.)
Dust Plug
Part No.
Dust Cap
Part No.
Material
1/4
1/4
1/4
1/2
1/2
3/4
PL-25
PR-25
P-25
DP-50
P-50
P-75
N/A
CR-25
C-25
DC-50
C-50
C-75
Plastic
Rubber
Aluminum
Rubber
Aluminum
Aluminum
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Hydraulic Quick Couplings
Dust Plugs and Dust Caps
4000 Series & 5000 Series
Body
Size
(in.)
Dust Plug
Part Number
Rubber
Dust Cap
Part No.
Rubber
1
1 1/2
HPP-100
HPP-150
HPC-100
HPC-150
Body
Size
(in.)
Dust Plug
Part No.
Steel
Dust Plug
Part No.
Rubber
Dust Cap
Part No.
Steel
Dust Cap
Part No.
Rubber
1/4
3/8
1/2
3/4
1
–
–
5005-4
–
–
5205-2M*
5205-3
5205-4M*
5205-5
5205-6
–
–
5009-4
–
–
5209-2M*
5209-3
5209-4M*
5209-5
5209-6
* Designates all rubber material. (Not shown at left)
NS Series
Body Size
(in.)
Part Number
Rubber
3/8
1/2
3/4
1
NR-37
NR-50
NR-75
NR-100
Protective cover fits either half.
FF Series, FC Series, FH Series & FS Series
Body
Size
(in.)
Dust Plug
Part Number
Rubber
Dust Cap
Part No.
Rubber
1/4*
3/8
1/2
3/4
1
FR-25
NR-50
FR-501
FR-751
FR-1001
FR-25
NR-37
FR-502
FR-752
FR-1002
Body
Size
(in.)
Dust Plug
Part Number
Rubber
Dust Cap
Part No.
Rubber
1/4
3/8
1/2
3/4
1
FR-25
NR-50
FR-501
FR-751
FR-1001
FR-25
NR-37
FER-502
FER-752
Body
Size
(in.)
Dust Plug
Part No.
Brass
Dust Cap
Part No.
Brass
3/4
1
1 1/4
1 1/2
6109-08
6109-16
6109-20
6109-24
6108-08
6108-16
6108-20
6108-24
* FR-25 fits both halves
FE Series, FEC Series, FEM Series
6100 Series
B-61
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
B Hydraulics
HP Series
Dust Plugs and Dust Caps
Hydraulic Quick Couplings
B Hydraulics
9200 Series
Body
Size
(in.)
Dust Cap.
Part No.
Rubber
1/2
9507-4-1
Body
Size
(in.)
Dust Plug
Part No.
Steel
Dust Cap
Part No.
Steel
1/4
3/8
3005-2
3005-3
3009-2
3009-3
Body Size
(in.)
Part Number
Rubber
3/8
TR-37
3000 Series
TC Series
Protective cover fits either half.
HO Series
TR-37 Plug / Cap
DC-50
B-62
Body Size
(in.)
Used With
HO Series
Coupler/Nipple
Part No.
Dust Plug
Part No.
Dust Cap
Part No.
Material
1/4
3/8
HO-251/252-4FP
TR-37
TR-37
Rubber
HO-371/372-6FP
TR-37
TR-37
Rubber
1/2
HO-501-8FP
DP-50
-
Rubber
1/2
HO-502-8FP
-
DC-50
Rubber
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Ordering Information
Hydraulic Quick Couplings
Many of Parker’s coupling products are available with unique
non-standard options well suited to very specific applications.
Examples of unusual end use applications might include:
high temperatures (above 250° F), extremely
caustic/corrosive solutions passing through the coupling,
external/environmental corrosion situations, or other high
wear and tear situations such as dragging the product along
the ground. Please see the Fluid Compatibility Chart at the
end of the catalog for a guide in selecting material for various
media. It is always recommended that the Quick Coupling
Division be contacted with any questions concerning specific
product application needs.
Typically, a prefix or suffix is added to the base part number to
specify a non-standard O-ring seal, or special option such as
a sleeve lock. The Optional Seals Suffix chart illustrates the
designations.
Please Note: Certain couplings series have additional
"Special Order Information" which should be referred to in
ordering those products. If applicable to the product, "Special
Order Information" is found next to the Features and
Specifications charts.
Operation
•
•
•
•
•
Prefix “HD” for heavy duty nipple
Suffix “SL” for coupler sleeve-lok
Suffix “P” for poppet valve
Suffix “BP” for Push-lok hose barb
Suffix “VA” for Valve Actuator
B Hydraulics
When ordering Parker coupler bodies and nipples, please
state the part number of each type of coupler body and each
type of nipple desired. List coupler bodies and nipples as
separate items rather than in combinations. Be sure to double
check thread or hose sizes of items required.
Optional Seals Suffix*
No suffix is required when ordering products with the
standard Nitrile seals. When specifying an optional seal, refer
to the following chart to determine the appropriate suffix.**
Coupling Series
Ethylene
Propylene
Fluorocarbon
Neoprene Perfluoroelastomer
60 Series
W
Y
Z
****
6600 Series
W
Y
Z
****
SM Series
E5
E4
E12
****
HP Series
E5
E4
E12
****
4000 Series
W
Y
Z
N/A
4200 Series
W
Y
Z
N/A
NS Series
E5
E4
N/A
****
FF Series
E5
E4
N/A
****
E5
E4
N/A
****
Std. is E49
FE Series
FH Series
E5
E4
N/A
****
FS Series
E5
STD
E12
****
6100 Series
W
Y
Z
N/A
5000 Series
W
Y
Z
N/A
8200 Series
W
Y
Z
N/A
9200 Series
W
Y
Z
N/A
3000 Series
Available with Polyurethane only (no suffix needed)
TC Series
Available with Fluorocarbon only (no suffix needed)
1141 Series
Available with Polyurethane only (no suffix needed)
ST Series
W
Water Service
WB Series
Y
Z
Available with Nitrile only
E5
E4
E12
N/A
HO Series
E5
E4
E12
N/A
Moldmate Series
N/A
Y***
N/A
N/A
Std. is Silicone
*To select proper seal materials, see Fluid Compatibility Chart in Appendices
section, or contact your Parker Quick Coupling Distributor.
**N/A = Not Available; STD = Standard (No Suffix Needed)
*** Fluorocarbon seal available for use only with oil based media, not water glycol.
**** Contact the division for Perfluoroelastomer Seal Options.
B-63
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Promotional Products
Hydraulic Quick Couplings
B Hydraulics
Description
These popular coupling key chains are now available from the
Quick Coupling Division. The new key chains are an anodized
aluminum construction available in an array of colors. Key
chains can be ordered using part numbers in the following
chart.
Part Number
B-64
Sleeve Color
KEY-BK
Black
KEY-BU
Blue
KEY-GR
Green
KEY-RD
Red
KEY-CL
Clear
KEY-NI
Old style nickel plated
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
C-1
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
C Thermoplastics
Thermoplastic
Couplings
Table of Contents
C Thermoplastics
Thermoplastic Couplings
Coupling Selection Guide ......................................C-3
PF Series..................................................................C-8
Specifications..........................................................C-8
Couplers..................................................................C-9
Nipples ....................................................................C-9
Dust Caps and Plugs ..............................................C-9
Spectrum Series .....................................................C-4
Specifications..........................................................C-4
Couplers..................................................................C-5
Nipples - Unvalved ..................................................C-6
Nipples - Valved ......................................................C-7
Ordering Information ............................................C-10
C-2
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Coupling Selection Guide
Valving
Coupler
Style
Body
Size (in.)
Flush Face
Non-Spill
Push-toConnect
1/2", 1"& 2”
Spectrum TM Series
Valved or
Unvalved
Push-toConnect
Spectrum TM Series
Valved or
Unvalved
Push-toConnect
Spectrum TM Series
Valved or
Unvalved
Push-toConnect
PF Series
Material
Polypropylene/
Stainless and/or
Kynar/Hastelloy
Acetal
1/8" & 3/8"
316 SS
PVDF/SS
1/8" & 3/8"
316 SS
3/8"
PVDF/
PEEKTM
Locking
Std. Seal
Mechanism Material
Temp
Range**
Rate
Pressure
Pawl lock
Fluorocarbon
+40° to +140° F
30 to 100 PSI
Finger Lock
Nitrile
0°F to 180°F
0 to 145 PSI
Finger Lock
Fluorocarbon
0°F to 250°F
0 to 115 PSI
Finger Lock
Fluorocarbon
0°F to 250°F
15 to 115 PSI
Ordering Information
Optional Seals Suffix*
No suffix is required when ordering products with the
standard Fluorocarbon seals. When specifying an optional
seal, refer to the following chart to determine the appropriate
suffix.**
Coupling Series
Ethylene
Propylene
Neoprene
Perfluoroelastomer
PF Series
E5
E12
E47
*To select proper seal materials, see Fluid Compatibility Chart in Appendices
section, or contact your Parker Quick Coupling Distributor.
**N/A = Not Available; STD = Standard (No Suffix Needed)
Spectrum Series – are available with these materials
Body Material
Seal Material
Acetal/SS
Nitrile
PVDF/SS
Fluorocarbon
PVDF/PEEK™
Fluorocarbon
C-3
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
C Thermoplastics
Thermoplastic Couplings
Push-To-Connect
Thermoplastic Couplings
Spectrum™ Series
Applications
Parker’s Spectrum™ Series couplers are the most advanced
engineered thermoplastic couplings available. Spectrum
Series couplings combine compact size, high flow capability,
and light weight design to meet a broad range of coupling
applications. Three material combinations allow the couplings
to be used in markets as diverse as chemical processing,
automation equipment, semi-conductor and food processing.
Spectrum Series can be used in many applications previously
reserved for stainless steel couplings.
C Thermoplastics
Features
• Excellent Chemical Compatibility
• Three Material Combinations:
Acetal/SS, PVDF/SS and PVDF/PEEK™
• High Flow Capacity
• Easy Push-To-Connect Operation
• Available Valved and Unvalved
• Flexible Modular Design
• Four Point 360° Locking Mechanism
• Temperatures Up To 250° F
• Panel Mounting Option
Performance
How To Order
Spectrum Series (1/8")
Test Fluid: Water
25
40
35
20
Pressure Drop in PSID
Pressure Drop in PSID
Double
Shut Off
Single
Shut Off
15
10
Straight
Through
5
Spectrum Series (3/8")
Test Fluid: Water
S
FP - Female pipe
MP - Male pipe
HB - Standard hose barb
BHB - Bulkhead hose barb
Double
Shut Off
30
Port Size 16 ths
V - Valved
S - Straight thru
25
Single
Shut Off
20
15
C - Coupler
N - Nipple
P - Panel mount coupler
A - Acetal
P - PVDF
K - PVDF/PEEK™
Straight
Through
10
Body Size
2 - 1/8 Inch
6 - 3/8 Inch
5
0
0
0.5
1
1.5
0
2
2 - A C V - 04 - FP
Spectrum Series Thermoplastic Couplings
0
Flow in USGPM
1
2
3
4
5
Flow in USGPM
6
Specifications
Body Size
Pressure Range
Temperature Range
Rated Flow
Body Material
Spring Material
Seal Material
Acetal/SS
PVDF/SS
PVDF/PEEK™
(black with grey sleeve)
(translucent with green sleeve)
(translucent)
1/8
0-145 psi
3/8
0-145 psi
1/8
0-115 psi
3/8
0-115 psi
3/8
15-115 psi
(0-10 bar)
(0-10 bar)
(0-8 bar)
(0-8 bar)
(1-8 bar)
0° F to 180° F
0° F to 180° F
0° F to 250° F
0° F to 250° F
0° F to 250° F
(-20° C to +80° C)
(-20° C to +80° C)
(-20° C to +120° C)
(-20° C to +120° C)
(-20° C to +120° C)
1.5 GPM
4.5 GPM
1.5 GPM
4.5 GPM
4.5 GPM
(5.6 lpm)
(17 lpm)
(5.6 lpm)
(17 lpm)
(17 lpm)
Acetal
316 SS
Nitrile
Acetal
316 SS
Nitrile
PVDF
316 SS
Fluorocarbon
PVDF
316 SS
Fluorocarbon
PVDF
PEEK™
Fluorocarbon
C-4
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Push-To-Connect
Thermoplastic Couplings
Spectrum™ Series
Couplers
Body
Size (in.)
A
C
B
Male Pipe
A
Acetal*
Part No.
PVDF*
Part No.
PVDF/PEEK™*
Part No.
Port
NPT
Overall Hex Largest
Length Size Diameter
A
B
C
1/8
S2-ACV-02-FP
S2-PCV-02-FP
—
1/8-27
2.15
.67
.82
1/8
S2-ACV-04-FP
S2-PCV-04-FP
—
1/4-18
2.34
.67
.82
3/8
S6-ACV-04-FP
S6-PCV-04-FP
S6-KCV-04-FP
1/4-18
2.63
.82
1.02
3/8
S6-ACV-06-FP
S6-PCV-06-FP
S6-KCV-06-FP
3/8-18
2.63
.82
1.02
3/8
S6-ACV-08-FP
S6-PCV-08-FP
S6-KCV-08-FP
1/2-14
3.10
.82
1.02
Body
Size (in.)
Acetal*
Part No.
PVDF*
Part No.
PVDF/PEEK™*
Part No.
Port
NPT
A
B
C
1/8
S2-ACV-02-MP
S2-PCV-02-MP
—
1/8-27
2.04
.67
.82
1/8
S2-ACV-04-MP
S2-PCV-04-MP
—
1/4-18
2.15
.67
.82
3/8
S6-ACV-04-MP
S6-PCV-04-MP
S6-KCV-04-MP
1/4-18
2.90
.82
1.02
3/8
S6-ACV-06-MP
S6-PCV-06-MP
S6-KCV-06-MP
3/8-18
2.77
.82
1.02
3/8
S6-ACV-08-MP
S6-PCV-08-MP
S6-KCV-08-MP
1/2-14
3.10
.82
1.02
Acetal*
Part No.
PVDF*
Part No.
PVDF/PEEK™*
Part No.
Hose
I.D.
1/8
S2-ACV-03-HB
S2-PCV-03-HB
—
3/16
1/8
S2-ACV-04-HB
S2-PCV-04-HB
—
Overall Hex Largest
Length Size Diameter
C
B
Hose Barb
Body
Size (in.)
A
Overall Hex Largest
Length Size Diameter
A
B
C
2.34
.67
.82
2.34
.67
.82
3.19
.82
1.02
3.19
.82
1.02
3.31
.82
1.02
C
B
(4 mm)
1/4
(6 mm)
3/8
S6-ACV-04-HB
S6-PCV-04-HB
S6-KCV-04-HB
1/4
(6 mm)
3/8
S6-ACV-06-HB
S6-PCV-06-HB
S6-KCV-06-HB
3/8
(9 mm)
3/8
S6-ACV-08-HB
S6-PCV-08-HB
S6-KCV-08-HB
1/2
(13 mm)
Bulkhead Hose Barb
Body
Size (in.)
A
Acetal*
Part No.
PVDF*
Part No.
PVDF/PEEK™ Hose Overall Hex Largest Bulkhead
Part No.
I.D. Length Size Diameter
Hex
C
D
B
1/8 S2-ACV-03-BHB
S2-PCV-03-BHB
—
1/8 S2-ACV-04-BHB
S2-PCV-04-BHB
—
3/16
A
B
C
D
2.89
.67
.82
.67
2.89
.67
.82
.67
(4 mm)
1/4
(6 mm)
Panel Mount Couplers
Female Pipe
Body
Size (in.)
A
Acetal*
Part No.
PVDF*
Part No.
PVDF/PEEK™ Hose Overall Hex Largest Bulkhead
Part No.
I.D. Length Size Diameter
Hex
B
C
D
1/8
S2-APV-02-FP
S2-PPV-02-FP
—
1/8-27 2.04
.67
1.10
1.06
1/8
S2-APV-04-FP
S2-PPV-04-FP
—
1/4-18 2.16
.67
1.10
1.06
A
C
B
D
Hose Barb
Body
Size (in.)
A
C
Acetal*
Part No.
PVDF*
Part No.
PVDF/PEEK™ Hose Overall Hex Largest Bulkhead
Part No.
I.D. Length Size Diameter
Hex
1/8
S2-APV-03-HB
S2-PPV-03-HB
—
1/8
S2-APV-04-HB
S2-PPV-04-HB
—
3/16
A
B
C
D
2.34
.67
1.10
1.06
2.34
.67
1.10
1.06
(4 mm)
B
D
1/4
(6 mm)
* NOTE: To Order Unvalved Coupler replace “V” with an “S”.
C-5
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
C Thermoplastics
Female Pipe
Push-To-Connect
Thermoplastic Couplings
Spectrum™ Series
Nipples – Unvalved
Female Pipe
Body
Size (in.)
A
Acetal
Part No.
PVDF
Part No.
PVDF/PEEK™
Part No.
Port
NPT
S2-ANS-02-FP
S2-PNS-02-FP
—
1/8-27
C
1/8
C Thermoplastics
B
Male Pipe
C
Hose Barb
A
B
C
.55
.62
S2-ANS-04-FP
S2-PNS-04-FP
—
1/4-18
1.18
.67
.76
3/8
S6-ANS-04-FP
S6-PNS-04-FP
—
1/4-18
1.52
.67
.73
3/8
S6-ANS-06-FP
S6-PNS-06-FP
—
3/8-18
1.52
.83
.91
3/8
S6-ANS-08-FP
S6-PNS-08-FP
—
1/2-14
1.68
.98
1.09
Acetal
Part No.
PVDF
Part No.
PVDF/PEEK™
Part No.
Port
NPT
S2-ANS-02-MP
S2-PNS-02-MP
—
1/8-27
1/8
B
A
1.02
1/8
Body
Size (in.)
A
Overall Hex Largest
Length Size Diameter
Overall Hex Largest
Length Size Diameter
A
B
C
1.08
.55
.62
1/8
S2-ANS-04-MP
S2-PNS-04-MP
—
1/4-18
1.24
.67
.76
3/8
S6-ANS-04-MP
S6-PNS-04-MP
—
1/4-18
1.64
.67
.73
3/8
S6-ANS-06-MP
S6-PNS-06-MP
—
3/8-18
1.64
.83
.91
3/8
S6-ANS-08-MP
S6-PNS-08-MP
—
1/2-14
1.83
.94
1.04
Body
Size (in.)
Acetal
Part No.
PVDF
Part No.
PVDF/PEEK™
Part No.
Hose
I.D.
Overall
Length
A
B
1/8
S2-ANS-03-HB
S2-PNS-03-HB
—
3/16
1.26
.34
1/8
S2-ANS-04-HB
S2-PNS-04-HB
—
1.26
.34
1.86
.71
1.87
.71
1.99
.71
B
Largest
Diameter
(4 mm)
1/4
(6 mm)
3/8
S6-ANS-04-HB
S6-PNS-04-HB
—
1/4
(6 mm)
3/8
S6-ANS-06-HB
S6-PNS-06-HB
—
3/8
(9 mm)
3/8
S6-ANS-08-HB
S6-PNS-08-HB
—
1/2
(13 mm)
Bulkhead Hose Barb
Body
Size (in.)
A
C
B
Acetal
Part No.
PVDF
Part No.
PVDF/PEEK™ Hose
Part No.
I.D.
1/8
S2-ANS-03-BHB
S2-PNS-03-BHB
—
1/8
S2-ANS-04-BHB
S2-PNS-04-BHB
—
3/16
Overall Hex
Length Size
Largest Bulkhead
Diameter
Hex
A
B
C
D
1.97
.55
.64
.55
1.97
.55
.77
.67
(4 mm)
D
1/4
(6 mm)
C-6
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Push-To-Connect
Thermoplastic Couplings
Spectrum™ Series
Nipples –Valved
Body
Size (in.)
A
C
B
Male Pipe
Acetal
Part No.
PVDF
Part No.
PVDF/PEEK™
Part No.
Port
NPT
A
B
C
1/8
S2-ANV-02-FP
S2-PNV-02-FP
—
1/8-27
1.61
.67
.76
1/8
S2-ANV-04-FP
S2-PNV-04-FP
—
1/4-18
1.80
.67
.76
3/8
S6-ANV-04-FP
S6-PNV-04-FP
S6-KNV-04-FP
1/4-18
2.02
.83
.91
3/8
S6-ANV-06-FP
S6-PNV-06-FP
S6-KNV-06-FP
3/8-18
2.02
.83
.91
3/8
S6-ANV-08-FP
S6-PNV-08-FP
S6-KNV-08-FP
1/2-14
2.49
.83
.91
Acetal
Part No.
PVDF
Part No.
PVDF/PEEK™
Part No.
Port
NPT
A
B
C
1/8
S2-ANV-02-MP
S2-PNV-02-MP
—
1/8-27
1.49
.67
.76
1/8
S2-ANV-04-MP
S2-PNV-04-MP
—
1/4-18
1.80
.67
.76
3/8
S6-ANV-04-MP
S6-PNV-04-MP
S6-KNV-04-MP
1/4-18
2.24
.83
.91
3/8
S6-ANV-06-MP
S6-PNV-06-MP
S6-KNV-06-MP
3/8-18
2.16
.83
.91
3/8
S6-ANV-08-MP
S6-PNV-08-MP
S6-KNV-08-MP
1/2-14
2.49
.83
.91
Acetal
Part No.
PVDF
Part No.
PVDF/PEEK™
Part No.
Hose
I.D.
1/8
S2-ANV-03-HB
S2-PNV-03-HB
—
3/16
1/8
S2-ANV-04-HB
S2-PNV-04-HB
—
Body
Size (in.)
A
C
B
Hose Barb
Body
Size (in.)
Overall Hex Largest
Length Size Diameter
Overall Hex Largest
Length Size Diameter
Overall Hex Largest
Length Size Diameter
A
A
B
C
1.80
.67
.76
1.80
.67
.76
2.59
.82
.91
2.59
.82
.91
2.71
.82
.91
(4 mm)
C
1/4
B
(6 mm)
3/8
S6-ANV-04-HB
S6-PNV-04-HB
S6-KNV-04-HB
1/4
(6 mm)
3/8
S6-ANV-06-HB
S6-PNV-06-HB
S6-KNV-06-HB
3/8
(9 mm)
3/8
S6-ANV-08-HB
S6-PNV-08-HB
S6-KNV-08-HB
1/2
(13 mm)
Bulkhead Hose Barb
Body
Size (in.)
Acetal
Part No.
PVDF
Part No.
PVDF/PEEK™ Hose Overall Hex Largest Bulkhead
Part No.
I.D. Length Size Diameter
Hex
A
C
B
D
1/8 S2-ANV-03-BHB
S2-PNV-03-BHB
—
1/8 S2-ANV-04-BHB
S2-PNV-04-BHB
—
3/16
A
B
C
D
2.35
.67
.76
.55
2.35
.67
.76
.55
(4 mm)
1/4
(6 mm)
C-7
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
C Thermoplastics
Female Pipe
Non-Spill Couplings
Thermoplastic Couplings
PF Series – Chemical Transfer Couplings
Features
The Parker PF Series Dry Disconnect couplings virtually
eliminate fluid loss upon disconnection and are designed to help
meet the demand for closed system transfer and dispensing of
chemicals and fluids with minimal environmental contamination.
They can be used with concentrated or diluted industrial
chemicals, fertilizers, herbicides, insecticides, fungicides or
pesticides when transferring from bulk storage tanks, returnable
containers, applicators, etc.
large bulk transfer of fluids and eliminating fluid spillage when
connecting and disconnecting.
Additional features include:
• Rugged Glass filled Polypropylene construction for
chemical compatibility and reduced cost.
Applications
•
•
•
•
•
Chemical Dispensing Systems
Spray Application Equipment
Mini Bulk Tanks
Replacement for Banjo Style Camlok Fittings & Ball Valves
Bulk Transfer Barrels
Specifications
Body Size
Materials:
Body
Springs
Seals
Rated Pressure
(at 68° F)
1/2"
1"
PTFE coated Fluorocarbon tank gasket for improved
chemical compatiblity.
•
1" coupler has non-wetted springs. Spring options
available for nipples include: hastelloy springs designated
-640, or kynar coated springs designated -714 .
PF (1/2", 1", 2")
Test Fluid: Water
25
316 Stainless Steel(2)
20
Fluorocarbon
Rated Flow
12 GPM
20 GPM
50 GPM
Pressure Drop
at Rated Flow
11.3 PSI
3.4 PSI
4 PSI
Force to Connect
32 lbs.
54 lbs.
41 lbs.
Force to Disconnect
12 lbs.
17 lbs.
17 lbs.
Vacuum Rating
•
Polypropylene(1)
100 PSI
Maximum Spillage
per Disconnect
Flush face valves exhibit minimal spillage upon connect or
disconnect and air inclusion on connect, and enables ease
of cleaning.
2”
60 PSI
Storage Temp.
Push-to-connect design.
•
Performance
100 PSI
Operating Temp.
•
+40°F to +140° F
1/2"
Pressure Drop in PSID
C Thermoplastics
New 2” Size The new PF Series 2" body size is ideal for
27.4 Hg
1ml
.06 cu. in. (1cc)
1"
10
2"
5
-20°F to +140° F
0.14 ml
.01 cu. in.
15
9 ml
.5 cu. in.
0
Contact Factory Contact Factory
(1) Hastelloy™ & Kynar™ Coated available upon special request
(2) Also available in EPDM, Nitrile, Neoprene, Perfluoroelastomer
0
10
20
30
40
50
60
70
Flow in USGPM
C-8
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Non-Spill Couplings
Thermoplastic Couplings
PF Series – Non-Spill Chemical Transfer Couplings
Couplers
A
Body
Size (in.)
B
1" NPT
Part
No.
Port*
Thread
Overall Largest Wrench Wt. (LB.)
Length Diameter Flats P/Piece
1/2 PF-501-8FP 1/2"NPT
1 PF-1001-16FP 1" NPT
2 PF-2001-32FP 2” NPT
A
3.02
3.99
6.63
B
1.88
3.00
5.00
1.38
1.99
-
0.18
0.53
1.75
* Female NPT Threads standard. For other port options contact the division.
Body
Size
(in.)
A
Part
No.
Tank Overall Largest Wrench Wt. (LB.)
Port* Mount Length Diameter Flats P/Piece
Thread Thread
A
1/2 PF-502-8FP 1/2" NPT None 2.96
1 PF-1002-16FP 1" NPT None 3.92
2 PF-2002-32FP 2” NPT None 5.71
B
1" NPT
B
1.33
2.20
3.55
1.24
1.87
-
0.09
0.26
0.75
* Female NPT Threads standard. For other port options contact the division.
Nipples - Tank Mount
A
2 1/2 -5 Modified
5°/45° Buttress Thread
Body
Size
(in.)
Part
No.
Tank Overall Largest Wrench Wt. (LB.)
Port*
Mount Length Diameter Flats P/Piece
Thread Thread
A
1 PF-1002-32MB 1" NPT Modified 3.92
Buttress
1 PF-1002-32MP 1" NPT Modified 3.92
NPS
B
1" NPT
Fluorocarbon Gasket
B
2.75
1.87
0.33
2.75
1.87
0.31
* Female NPT Threads standard. For other port options contact the division.
A
2-11 1/2 NPS
Modified Thread
B
1" NPT
Fluorocarbon Gasket
Dust Caps and Plugs
Body
Coupler Dust Cap
Size (in.)
Part No.
1/2
1
1
Coupler Dust Cap
FR-501
FR-501
None
None
Nipple Dust Cap
Part No.
Material
FR-502
Synthetic Rubber
PFR-1002
Ethylene Propylene
PFR-1002-NS* Ethylene Propylene
* For use with Tank Mount Nipples
Nipple Dust Cap
FR-502
Nipple Dust Cap
PFR-1002
Nipple Dust Cap (Tank Mount)
PFR-1002-NS
C-9
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
C Thermoplastics
Nipples
Ordering Information
Thermoplastic Couplings
C Thermoplastics
When ordering Parker coupler bodies and nipples, please state
the part number of each type of coupler body and each type of
nipple desired. List coupler bodies and nipples as separate
items rather than in combinations. Be sure to double check
thread or hose sizes of items required.
Many of Parker’s coupling products are available with unique
non-standard options well suited to very specific applications.
Examples of unusual end use applications might include: high
temperatures (above 250° F), extremely caustic/corrosive
solutions passing through the coupling, external/environmental
corrosion situations, or other high wear and tear situations such
as dragging the product along the ground. Please see the Fluid
Compatibility Chart at the end of the catalog for a guide in
selecting material for various media. It is always recommended
that the Quick Coupling Division be contacted with any
questions concerning specific product application needs.
Optional Seals Suffix*
No suffix is required when ordering products with
the standard Fluorocarbon seals. When specifying an
optional seal, refer to the following chart to determine
the appropriate suffix.**
Coupling Series
PF Series
Ethylene
Propylene
Neoprene
E5
E12
Perfluoroelastomer
E35***
E47****
* To select proper seal materials, see Fluid Compatibility Chart in
Appendices section, or contact your Parker Quick Coupling Distributor.
** N/A = Not Available; STD = Standard (No Suffix Needed)
*** Parofluor™
**** DuPont Kalrez™
Please Note: Certain couplings series have additional "Special
Order Information" which should be referred to in ordering
those products. If applicable to the product, "Special Order
Information" is found next to the Features and Specifications
charts.
Spectrum Series – are available with these materials
Body Material
Acetal/SS
Nitrile
PVDF/SS
Fluorocarbon
PVDF/PEEK™
C-10
Seal Material
Fluorocarbon
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
D Swivels
Swivels
D-1
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
General Introduction
Applications
Some common markets and applications for swivels are:
• Hose Reels
• Pulp and Paper
• Pressure Washers
• Logging
• Machine Tools
• Refuse Trucks
• Steel Mills
• Utility Equipment
• Palletizers
• Mobile Equipment
• And many more…
D Swivels
• Injection Molding
D-2
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Table of Contents
Swivels
Applications ............................................................D-1
S Series
Introduction ...........................................................D-27
How To Order ........................................................D-28
90°.........................................................................D-29
Repair Kits ............................................................D-33
Seal Options .........................................................D-33
D Swivels
PS Series
Introduction .............................................................D-4
How To Order ..........................................................D-5
In-Line .....................................................................D-6
90°.........................................................................D-15
Repair Kits ............................................................D-26
Seal Options .........................................................D-26
D-3
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Introduction
Swivels
PS Series
Introduction
Features
The design and manufacturing processes vital to a
swivel’s quality are the
cornerstone of the Quick
Coupling Division’s day to
day operations. The PS
Series Swivel is designed
to meet the application
needs and performance
requirements of the market. Pressure capabilities up to 5000
psi, 1/4" through 2" body sizes, a variety of port options, zinc
with yellow chromate or nickel plating and a wide range of
seal options make the PS Series Swivels ideal for an array of
dynamic applications.
• Hardened bearing races for extended service life.
• Full flow design minimizes pressure drop for optimum system performance.
• Sealed bearing design isolates bearing race from media
and environment.
• Reduced bearing load design minimizes wear in the bearing race and extends service life.
• PTFE back-up rings support primary seal for high-pressure
applications.
• Zinc with yellow chromate plating for maximum corrosion
resistance.
• Variety of seal options available.
• Three piece swivel design for sizes 1 1/4" through 2" for
superior performance and service life.
• Polyurethane U-Cup primary seal standard for sizes 1 1/4"
through 2".
• PS Series Swivels eliminate hose twist and torque that may
cause premature hose failure.
Specifications
Body Size (in.)
Maximum Rated Pressure (PSI)
Except the following port options in the noted size
03 (Male JIC 37°)
05 (Male SAE O-Ring Boss)
06 (Female JIC 37°) 90° Housing Port
06 (Female JIC 37°) In-Line Housing Port
07 (Female NPSM)
Temperature Range (std seals)
1/4
5000
3/8
5000
1/2
5000
3/4
5000
1
5000
4000
4600
1-1/4
4000
3000
1-1/2
4000
2
3000
3000
2000
2500
2000
2000
1500
3000
2500
3000
2100
1650
-30° to 180° F
3000
2600
-40° to 250° F
Performance Data
90 PS Swivel
150 SUS Oil Flow vs. Pressure Drop
Torque vs. Pressure
Recommended Max. Speed vs. Pressure
40
40
35
40
35
30
1/4"
25
1/2"
20
3/4"
15
1"
10
3/4"
25
20
15
1/2"
3/8"
10
2"
1/4"
5
5
0
3/8"
1"
30
Pressure Drop (psid)
45
45
Torque (in-lbs)
50
35
RPM
D Swivels
• Precision needle bearings and ball bearings sized 1 1/4"
through 2" for additional side load resistance.
3/8"
30
25
1"
1/2"
1/4"
20
3/4"
15
10
5
1-1/2"
0
1000
2000
3000
Pressure (PSI)
4000
5000
0
0
1000
2000
3000
Pressure (PSI)
D-4
4000
5000
0
0
10
20
30
40
50
60
70
80
90
Flow (USGPM)
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
How To Order
Swivels
PS Series
90° Swivels
Shaft
Housing
Shaft
Housing
PS Part Number:
PS 16 1 02 02 - 16 - 16 Y Seal Code:
Blank = Nitrile†
A = Aflas™*
W = Ethylene Propylene
Y = Fluorocarbon
Z = Neoprene
For Perfluoroelastomer Seal Option
Contact the Division.
Material and Finish:
Blank = Carbon Steel w/Zinc &
Yellow Chromate Plating (Std.)
NI = Carbon Steel with
Electroless Nickel Plating*
S3 = 303 Stainless Steel
Passivated*
S6 = 316 Stainless Steel
Electropolished*
Housing Port Size (1/16 of an inch)††
Shaft Port Size (1/16 of an inch)††
Configuration:
1 = In-line
9 = 90 degree
Shaft Port Configuration:
01 = Male NPTF
02 = Female NPTF
03 = Male JIC 37 Degree
05 = Male SAE O-Ring Straight Thread
10 = Female SAE Straight Thread
JM = Male Seal-Lok
Housing Port Configuration:
01 = Male NPTF(Non-Standard)*
02 = Female NPTF
03 = Male JIC 37 Degree
05 = Male SAE O-Ring Straight Thread
06 = Female JIC 37 Degree
07 = Female NPSM Pipe Swivel
10 = Female SAE Straight Thread
JM = Male Seal-Lok
Body Size
(1/16 of an inch)
Parker Swivel designator
*Contact Division for price and delivery
†
On -24 and -32 sizes, Polyurethane U-Cup Seal is standard.
††
For -20 Ports, -24 Body is used.
D-5
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
D Swivels
In-Line Swivels
In-Line
Swivels
PS Series
Housing
O-Ring
Back-up Ring
Cap Screw
Bearing
O-Ring
Shaft
Materials Of Construction
Housing*: ............................................................Carbon Steel
Shaft*:.................................................................Carbon Steel
Plating:* .........................................Zinc with Yellow Chromate
Bearing:* .....................................................................Chrome
O-Rings:*........................................................................Nitrile
Back-Up Ring:.................................................................PTFE
D Swivels
* See How-To-Order for optional material, plating, and seals.
Male Pipe - Female Pipe
Part Number
A
PS410102-4-4
B
Hex 1
Hex 2
PS610102-6-6
Port 1
Port 2
PS810102-8-8
PS1210102-12-12
PS1610102-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.59”
1.60”
.75”
1.19”
1/4-18
1/4-18
65.8 mm
40.6 mm
19.0 mm
30.2 mm
NPTF
NPTF
2.66”
1.64”
.88”
1.31”
3/8-18
3/8-18
67.5 mm
41.7 mm
22.2 mm
33.3 mm
NPTF
NPTF
3.03”
1.79”
1.12”
1.50”
1/2-14
1/2-14
76.8 mm
45.5 mm
28.6 mm
36.5 mm
NPTF
NPTF
3.10”
1.85”
1.38”
1.69”
3/4-14
3/4-14
78.8 mm
47.0 mm
35.0 mm
42.9 mm
NPTF
NPTF
3.54”
2.11”
1.62”
1.88”
1-11 1/2
1-11 1/2
89.8 mm
53.5 mm
41.3 mm
47.6 mm
NPTF
NPTF
Male Pipe - Male 37° Flare
A
Part Number
B
Hex 1
Hex 2
Port 2
Port 1
PS410103-4-4
PS610103-6-6
PS810103-8-8
PS1210103-12-12
PS1610103-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.86”
1.87”
.75”
1.19”
1/4-18
7/16-20
72.6 mm
47.5 mm
19.0 mm
30.2 mm
NPTF
UNF-2A
2.92”
1.90”
.88”
1.31”
3/8-18
9/16-18
74.1 mm
48.3 mm
22.2
33.3 mm
NPTF
UNF-2A
3.33”
2.09”
1.12”
1.50”
1/2-14
3/4-16
84.5 mm
53.1 mm
28.6 mm
36.5 mm
NPTF
UNF-2A
3.55”
2.30”
1.38”
1.69”
3/4-14
1-1/16-12
90.3 mm
58.4 mm
35.0 mm
42.9 mm
NPTF
UN-2A
3.88”
2.45”
1.62”
1.88”
1-11 1/2
1-5/16-12
98.6 mm
62.2 mm
41.3 mm
47.6 mm
NPTF
UN-2A
Male Pipe - Female 37° Flare
Part Number
A
Hex 1
B
PS410106-4-4
Hex 2
PS610106-6-6
Port 1
Port 2
PS810106-8-8
PS1210106-12-12
PS1610106-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.72”
1.73”
.75”
1.19”
1/4-18
7/16-20
69.1 mm
43.9 mm
19.0 mm
30.2 mm
NPTF
UNF-2B
2.77”
1.75”
.88”
1.31”
3/8-18
9/16-18
70.3 mm
44.5 mm
22.2 mm
33.3 mm
NPTF
UNF-2B
3.05”
1.81”
1.12”
1.50”
1/2-14
3/4-16
77.3 mm
46.0 mm
28.6 mm
36.5 mm
NPTF
UNF-2B
3.27”
2.02”
1.38”
1.69”
3/4-14
1-1/16-12
83.2 mm
51.3 mm
35.0 mm
42.9 mm
NPTF
UN-2B
3.62”
2.19”
1.62”
1.88”
1-11 1/2
1-5/16-12
92.0 mm
55.6 mm
41.3 mm
47.6 mm
NPTF
UN-2B
D-6
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
In-Line
Swivels
PS Series
Male Pipe - Female SAE Straight Thread
Part Number
A
PS410110-4-4
B
Hex 1
Hex 2
PS610110-6-6
Port 1
Port 2
PS810110-8-8
PS1210110-12-12
PS1610110-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.71”
1.72”
.75”
1.19”
1/4-18
7/16-20
68.8 mm
43.7 mm
19.0 mm
30.2 mm
NPTF
UNF-2B
2.74”
1.72”
.88”
1.31”
3/8-18
9/16-18
69.6 mm
43.7 mm
22.2 mm
33.3 mm
NPTF
UNF-2B
3.03”
1.79”
1.12”
1.50”
1/2-14
3/4-16
76.8 mm
45.5 mm
28.6 mm
36.5 mm
NPTF
UNF-2B
3.33”
2.08”
1.38”
1.69”
3/4-14
1-1/16-12
84.7 mm
52.8 mm
35.0 mm
42.9 mm
NPTF
UN-2B
3.63”
2.20”
1.62”
1.88”
1-11 1/2
1-5/16-20
92.2 mm
55.9 mm
41.3 mm
47.6 mm
NPTF
UN-2B
Part Number
A
PS4101JM-4-4
B
Hex 1
Hex 2
PS6101JM-6-6
Port 2
Port 1
PS8101JM-8-8
PS12101JM-12-12
PS16101JM-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.74”
1.75”
.75”
1.19”
1/4-18
9/16-18
69.6 mm
44.5 mm
19.0 mm
30.2 mm
NPTF
UNF-2A
2.77”
1.75”
.88”
1.31”
3/8-18
11/16-16
70.3 mm
44.5 mm
22.2 mm
33.3 mm
NPTF
UN-2A
3.14”
1.90”
1.12”
150”
1/2-14
13/16-16
79.6 mm
48.3 mm
28.6 mm
36.5 mm
NPTF
UN-2A
3.34”
2.09”
1.38”
1.69”
3/4-14
1-3/16-12
84.9 mm
53.1 mm
35.0 mm
42.9 mm
NPTF
UN-2A
3.63”
2.20”
1.62”
1.88”
1-11 1/2
1-7/16-16
92.2 mm
55.9 mm
41.3 mm
47.6 mm
NPTF
UN-2A
Female Pipe - Female Pipe
A
Part Number
PS410202-4-4
B
Hex 1
Hex 2
PS610202-6-6
Port 1
Port 2
PS810202-8-8
PS1210202-12-12
PS1610202-16-16
3 Piece Design
A
B
Hex 1
Hex 2
Port 1
Port 2
2.16”
1.60”
.75”
1.19”
1/4-18
1/4-18
54.9 mm
40.6 mm
19.0 mm
30.2 mm
NPTF
NPTF
2.30”
1.64”
.88”
1.31”
3/8-18
3/8-18
58.3 mm
41.7 mm
22.2 mm
33.3 mm
NPTF
NPTF
2.56”
1.79”
1.12”
1.50”
1/2-14
1/2-14
65.0 mm
45.5 mm
28.6 mm
36.5 mm
NPTF
NPTF
2.88”
1.85”
1.38”
1.69”
3/4-14
3/4-14
73.1 mm
47.0 mm
35.0 mm
42.9 mm
NPTF
NPTF
3.16”
2.11”
1.62”
1.88”
1-11 1/2
1-11 1/2
80.1 mm
53.5 mm
41.3 mm
47.6 mm
NPTF
NPTF
A
Part Number
B
Port 2
PS2410202-20-20
PS2410202-24-24
Port 1
Dia
PS3210202-32-32
A
B
Wrench Flats
4.67"
3.38"
2.63"
2.88" 1 1/4-11 1/2 1 1/4-11 1/2
Dia.
Port 1
118.6 mm
85.9 mm
66.7 mm
73.0 mm
4.67"
3.38"
2.63"
118.6 mm
85.9 mm
66.7 mm
73.0 mm
NPTF
NPTF
4.88"
3.58"
3.06"
3.35"
2-11 1/2
2-11 1/2
123.9 mm
90.8 mm
77.6 mm
85.1 mm
NPTF
NPTF
NPTF
Port 2
NPTF
2.88" 1 1/2-11 1/2 1 1/2-11 1/2
Wrench Flats
D-7
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
D Swivels
Male Pipe - O-Ring Face Seal
In-Line
Swivels
PS Series
Female Pipe - Male 37° Flare
A
Part Number
B
Hex 2
Hex 1
Port 2
PS410203-4-4
PS610203-6-6
Port 1
PS810203-8-8
PS1210203-12-12
3 Piece Design
PS1610203-16-16
A
B
Port 2
Part Number
PS2410203-20-20
Port 1
Dia
PS2410203-24-24
PS3210203-32-32
A
B
Hex 1
Hex 2
Port 1
Port 2
2.43”
1.87”
.75”
1.19”
1/4-18
7/16-20
61.7 mm
47.5 mm
19.0 mm
30.2 mm
NPTF
UNF-2A
2.56”
1.90”
.88”
1.31”
3/8-18
9/16-18
65.0 mm
48.3 mm
22.2 mm
33.3 mm
NPTF
UNF-2A
2.86”
2.09”
1.12”
1.50”
1/2-14
3/4-16
72.7 mm
53.1 mm
28.6 mm
36.5 mm
NPTF
UNF-2A
3.33”
2.30”
1.38”
1.69”
3/4-14
1-1/16-12
84.5 mm
58.4 mm
35.0 mm
42.9 mm
NPTF
UN-2A
3.50”
2.45”
1.62”
1.88”
1-11 1/2
1-5/16-12
88.9 mm
62.2 mm
41.3 mm
47.6 mm
NPTF
UN-2A
A
B
Wrench Flats
5.06"
3.78"
2.63"
2.88" 1 1/4-11 1/2
Dia.
Port 1
128.6 mm
95.9 mm
66.7 mm
73.0 mm
5.06"
3.78"
2.63"
128.6 mm
95.9 mm
66.7 mm
73.0 mm
NPTF
UN-2A
5.58"
4.28"
3.06"
3.35"
2-11 1/2
2 1/2-12
141.7 mm
108.6 mm
77.6 mm
85.1 mm
NPTF
UN-2A
NPTF
2.88" 1 1/2-11 1/2
Port 2
1 5/8-12
UN-2A
1 7/8-12
Wrench Flats
D Swivels
Female Pipe - Female 37° Flare
Part Number
A
PS410206-4-4
B
Hex 1
Port 1
Hex 2
Port 2
PS610206-6-6
PS810206-8-8
PS1210206-12-12
PS1610206-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.29”
1.73”
.75”
1.19”
1/4-18
7/16-20
58.2 mm
43.9 mm
19.0 mm
30.2 mm
NPTF
UNF-2B
2.41”
1.75”
.88”
1.31”
3/8-18
9/16-18
61.1 mm
44.5 mm
22.2 mm
33.3 mm
NPTF
UNF-2B
2.58”
1.81”
1.12”
1.50”
1/2-14
3/4-16
65.6 mm
46.0 mm
28.6 mm
36.5 mm
NPTF
UNF-2B
3.05”
2.02”
1.38”
1.69”
3/4-14
1-1/16-12
77.4 mm
51.3 mm
35.0 mm
42.9 mm
NPTF
UN-2B
3.24”
2.19”
1.62”
1.88”
1-11 1/2
1-5/16-12
82.3 mm
55.6 mm
41.3 mm
47.6 mm
NPTF
UN-2B
Female Pipe - Female SAE Straight Thread
Part Number
A
B
Hex 1
Hex 2
Port 1
Port 2
2.28”
1.72”
.75”
1.19”
1/4-18
7/16-20
57.9 mm
43.7 mm
19.0 mm
30.2 mm
NPTF
UNF-2B
2.38”
1.72”
.88”
1.31”
3/8-18
9/16-18
60.4 mm
43.7 mm
22.2 mm
33.3 mm
NPTF
UNF-2B
2.56”
1.79”
1.12”
1.50”
1/2-14
3/4-16
65.0 mm
45.5 mm
28.6 mm
36.5 mm
NPTF
UNF-2B
3.11”
2.08”
1.38”
1.69”
3/4-14
1-1/16-12
78.9 mm
52.8 mm
35.0 mm
42.9 mm
NPTF
UN-2B
3.25”
2.20”
1.62”
1.88”
1-11 1/2
1-5/16-20
82.6 mm
55.9 mm
41.3 mm
47.6 mm
NPTF
UN-2B
A
PS410210-4-4
B
Hex 1
Hex 2
PS610210-6-6
PS810210-8-8
Port 1
Port 2
PS1210210-12-12
PS1610210-16-16
Female Pipe - O-Ring Face Seal
Part Number
A
Hex 1
B
PS4102JM-4-4
Hex 2
PS6102JM-6-6
Port 2
PS8102JM-8-8
Port 1
PS12102JM-12-12
PS16102JM-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.31”
1.75”
.75”
1.19”
1/4-18
9/16-18
58.7 mm
44.5 mm
19.0 mm
30.2 mm
NPTF
UNF-2A
2.41”
1.75”
.88”
1.31”
3/8-18
11/16-16
61.1 mm
44.5 mm
22.2 mm
33.3 mm
NPTF
UN-2A
2.67”
1.90”
1.12”
1.50”
1/2-14
13/16-16
67.9 mm
48.3 mm
28.6 mm
36.5 mm
NPTF
UN-2A
3.12”
2.09”
1.38”
1.69”
3/4-14
1-3/16-12
79.2 mm
53.1 mm
35.0 mm
42.9 mm
NPTF
UN-2A
3.25”
2.20”
1.62”
1.88”
1-11 1/2
1-7/16-12
82.6 mm
55.9 mm
41.3 mm
47.6 mm
NPTF
UN-2A
D-8
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
In-Line
Swivels
PS Series
Male 37° Flare - Female Pipe
A
Part Number
B
Hex 1
PS410302-4-4
Hex 2
PS610302-6-6
Port 1
Port 2
PS810302-8-8
PS1210302-12-12
PS1610302-16-16
3 Piece Design
A
B
Hex 1
Hex 2
Port 1
Port 2
2.59”
1.60”
.75”
1.19”
7/16-20
1/4-18
65.8 mm
40.6 mm
19.0 mm
30.2 mm
UNF-2A
NPTF
2.66”
1.64”
.88”
1.31”
9/16-18
3/8-18
67.5 mm
41.7 mm
22.2 mm
33.3 mm
UNF-2A
NPTF
2.89”
1.79”
1.12”
1.50”
3/4-16
1/2-14
73.5 mm
45.5 mm
28.6 mm
36.5 mm
UNF-2A
NPTF
3.21”
1.85”
1.38”
1.69”
1-1/16-12
3/4-14
81.5 mm
47.0 mm
35.0 mm
42.9 mm
UN-2A
NPTF
3.54”
2.11”
1.62”
1.88”
1-5/16-12
1-11 1/2
89.8 mm
53.5 mm
41.3 mm
47.6 mm
UN-2A
NPTF
A
B
Port 1
Port 2
Part Number
PS2410302-20-20
PS2410302-24-24
Dia
PS3210302-32-32
A
B
Wrench Flats
Dia.
Port 1
Port 2
4.91"
3.38"
2.63"
2.88"
1 5/8-12
1 1/4-11 1/2
124.8 mm
85.9 mm
66.7 mm
73.0 mm
UN-2A
NPTF
4.91"
3.38"
2.63"
2.88"
1 7/8-12
1 1/2-11 1/2
124.8 mm
85.9 mm
66.7 mm
73.0 mm
UN-2A
NPTF
5.50"
3.58"
3.06"
3.35"
2 1/2-12
2-11 1/2
139.8 mm
90.8 mm
77.6 mm
85.1 mm
UN-2A
NPTF
Wrench Flats
Part Number
A
B
Hex 1
Hex 2
PS610303-6-6
Port 2
Port 1
PS410303-4-4
PS810303-8-8
PS810303-10-10
PS1210303-12-12
3 Piece Design
PS1610303-16-16
A
B
Port 1
Port 2
Part Number
PS2410303-20-20
PS2410303-24-24
Dia
PS3210303-32-32
A
B
Hex 1
Hex 2
Port 1
Port 2
2.86”
1.87”
.75”
1.19”
7/16-20
7/16-20
72.6 mm
47.5 mm
19.0 mm
30.2 mm
UNF-2A
UNF-2A
2.92”
1.90”
.88”
1.31”
9/16-18
9/16-18
74.1 mm
48.3 mm
22.2 mm
33.3 mm
UNF-2A
UNF-2A
3.19”
2.09”
1.12”
1.50”
3/4-16
3/4-16
81.1 mm
53.1 mm
28.6 mm
36.5 mm
UNF-2A
UNF-2A
3.39”
2.19”
1.12”
1.50”
7/8-14
7/8-14
86.2 mm
55.6 mm
28.6 mm
36.5 mm
UNF-2A
UNF-2A
3.66”
2.30”
1.38”
1.69”
1-1/16-12
1-1/16-12
92.9 mm
58.4 mm
35.0 mm
42.9 mm
UN-2A
UN-2A
3.88”
2.45”
1.62”
1.88”
1-5/16-12
1-5/16-12
98.6 mm
62.2 mm
41.3 mm
47.6 mm
UN-2A
UN-2A
A
B
Wrench Flats
Dia.
Port 1
Port 2
5.31"
3.78"
2.63"
2.88"
1 5/8-12
1 5/8-12
134.8 mm
95.9 mm
66.7 mm
73.0 mm
UN-2A
UN-2A
5.31"
3.78"
2.63"
2.88"
1 7/8-12
1 7/8-12
134.8 mm
95.9 mm
66.7 mm
73.0 mm
UN-2A
UN-2A
6.20"
4.28"
3.06"
3.35"
2 1/2-12
2 1/2-12
157.5 mm
108.6 mm
77.6 mm
85.1 mm
UN-2A
UN-2A
Wrench Flats
Male 37° Flare - Female 37° Flare
A
Hex 1
Part Number
B
PS410306-4-4
Hex 2
PS610306-6-6
Port 1
Port 2
PS810306-8-8
PS1210306-12-12
PS1610306-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.72”
1.73”
.75”
1.19”
7/16-20
7/16-20
69.1 mm
43.9 mm
19.0 mm
30.2 mm
UNF-2A
UNF-2B
2.77”
1.75”
.88”
1.31”
9/16-18
9/16-18
70.3 mm
44.5 mm
22.2 mm
33.3 mm
UNF-2A
UNF-2B
2.91”
1.81”
1.12”
1.50”
3/4-16
3/4-16
74.0 mm
46.0 mm
28.6 mm
36.5 mm
UNF-2A
UNF-2B
3.38”
2.02”
1.38”
1.69”
1-1/16-12
1-1/16-12
85.8 mm
51.3 mm
35.0 mm
42.9 mm
UN-2A
UN-2B
3.62”
2.19”
1.62”
1.88”
1-5/16-12
1-5/16-12
92.0 mm
55.6 mm
41.3 mm
47.6 mm
UN-2A
UN-2B
D-9
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
D Swivels
Male 37° Flare - Male 37° Flare
In-Line
Swivels
PS Series
Male 37° Flare - Female SAE Straight Thread
A
Part Number
B
Hex 1
Hex 2
PS410310-4-4
PS610310-6-6
Port 1
Port 2
PS810310-8-8
PS1210310-12-12
PS1610310-16-16
3 Piece Design
A
B
Hex 1
Hex 2
Port 1
Port 2
2.71”
1.72”
.75”
1.19”
7/16-20
7/16-20
68.8 mm
43.7 mm
19.0 mm
30.2 mm
UNF-2A
UNF-2B
2.74”
1.72”
.88”
1.31”
9/16-18
9/16-18
69.6 mm
43.7 mm
22.2 mm
33.3 mm
UNF-2A
UNF-2B
2.89”
1.79”
1.12”
1.50”
3/4-16
3/4-16
73.5 mm
45.5 mm
28.6 mm
36.5 mm
UNF-2A
UNF-2B
3.44”
2.08”
1.38”
1.69”
1-1/16-12
1-1/16-12
87.3 mm
52.8 mm
35.0 mm
42.9 mm
UN-2A
UN-2B
3.63”
2.20”
1.62”
1.88”
1-5/16-12
1-5/16-12
92.2 mm
55.9 mm
41.3 mm
47.6 mm
UN-2A
UN-2B
A
Port 2
B
Port 1
Part Number
PS2410310-20-20
Dia
PS2410310-24-24
PS3210310-32-32
A
B
C
D
Dia.
Wrench Flats
Port 1
Port 2
6.16"
4.63"
3.43"
1.27"
2.63"
3.36"
1 5/8-12
1 5/8-12
150.2 mm
117.5 mm
87.0 mm
32.3 mm
66.7 mm
85.2 mm
UN-2A
UN-2B
6.16"
4.63"
3.43"
1.27"
2.63"
3.36"
17/8-12
1 7/8-12
150.2 mm
117.5 mm
87.0 mm
32.3 mm
66.7 mm
85.2 mm
UN-2A
UN-2B
7.38"
5.45"
3.93"
1.52"
3.06"
4.19"
2 1/2-12
2-1/2-12
187.4 mm
138.4 mm
99.7 mm
38.5 mm
77.6 mm
106.4 mm
UN-2A
UN-2B
Wrench Flats
Male 37° Flare - O-Ring Face Seal
D Swivels
A
Part Number
B
Hex 1
Port 1
Hex 2
Port 2
PS4103JM-4-4
PS6103JM-6-6
PS8103JM-8-8
PS8103JM-10-10
PS12103JM-12-12
PS16103JM-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.74”
1.75”
75”
1.19”
7/16-20
9/16-18
69.6 mm
44.5 mm
19.0 mm
30.2 mm
UNF-2A
UNF-2A
2.77”
1.75”
.88”
1.31”
9/16-18
11/16-18
70.3 mm
44.5 mm
22.2 mm
33.3 mm
UNF-2A
UNF-2A
3.00”
1.90”
1.12”
1.50”
3/4-16
13/16-16
76.3 mm
48.3 mm
28.6 mm
36.5 mm
UNF-2A
UNF-2A
3.20”
1.99”
1.12”
1.50”
7/8-14
7/8-14
81.2 mm
50.5 mm
28.6 mm
36.5 mm
UNF-2A
UNF-2A
3.45”
2.09”
1.38”
1.69”
1-1/16-12
1-3/16-12
87.6 mm
53.1 mm
35.0 mm
42.9 mm
UN-2A
UN-2A
3.63”
2.20”
1.62”
1.88”
1-5/16-12
1-7/16-12
92.2 mm
55.9 mm
41.3 mm
47.6 mm
UN-2A
UN-2A
Male SAE O-Ring Straight Thread - Female Pipe
A
Part Number
B
Hex 2
PS410502-4-4
Hex 1
PS610502-6-6
Port 1
Port 2
PS810502-8-8
PS1210502-12-12
PS1610502-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.44”
1.60”
.75”
1.19”
7/16-20
1/4-18
62.1 mm
40.6 mm
19.0 mm
30.2 mm
UNF-2A
NPTF
2.48”
1.64”
.88”
1.31”
9/16-18
3/8-18
63.0 mm
41.7 mm
22.2 mm
33.3 mm
UNF-2A
NPTF
2.79”
1.79”
1.12”
1.50”
3/4-16
1/2-14
70.8 mm
45.5 mm
28.6 mm
36.5 mm
UN-2A
NPTF
3.02”
1.85”
1.38”
1.69”
1-1/16-12
3/4-14
76.7 mm
47.0 mm
35.0 mm
42.9 mm
UN-2A
NPTF
3.31”
2.11”
1.62”
1.88”
1-5/16-12
1-11 1/2
84.1 mm
53.5 mm
41.3 mm
47.6 mm
UN-2A
NPTF
D-10
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
In-Line
Swivels
PS Series
Male SAE O-Ring Straight Thread - Male 37° Flare
A
Part Number
PS410503-4-4
B
Hex 1
Hex 2
PS610503-6-6
Port 2
Port 1
PS810503-8-8
PS810503-10-10
PS1210503-12-12
PS1610503-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.71”
1.87”
.75”
1.19”
7/16-20
7/16-20
68.9 mm
47.5 mm
19.0 mm
30.2 mm
UNF-2A
UNF-2A
2.74”
1.90”
.88”
1.31”
9/16-18
9/16-18
69.6 mm
48.3 mm
22.2 mm
33.3 mm
UNF-2A
UNF-2A
3.09”
2.09”
1.12”
1.50”
3/4-16
3/4-16
78.4 mm
53.1 mm
28.6 mm
36.5 mm
UNF-2A
UNF-2A
3.25”
2.19”
1.12”
1.50”
7/8-14
7/8-14
82.5 mm
55.6 mm
28.6 mm
36.5 mm
UNF-2A
UNF-2A
3.47”
2.30”
1.38”
1.69”
1-1/16-12
1-1/16-12
88.2 mm
58.4 mm
35.0 mm
42.9 mm
UN-2A
UN-2A
3.66”
2.45”
1.62”
1.88”
1-5/16-12
1-5/16-12
92.9 mm
62.2 mm
41.3 mm
47.6 mm
UN-2A
UN-2A
A
Part Number
B
Hex 1
Hex 2
PS410506-4-4
PS610506-6-6
Port 1
Port 2
PS810506-8-8
PS1210506-12-12
PS1610506-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.57”
1.73”
.75”
1.19”
7/16-20
7/16-20
65.4 mm
43.9 mm
19.0 mm
30.2 mm
UNF-2A
UNF-2B
2.59”
1.75”
.88”
1.31”
9/16-18
9/16-18
65.8 mm
44.5 mm
22.2 mm
33.3 mm
UNF-2A
UNF-2B
2.81”
1.81”
1.12”
1.50”
3/4-16
3/4-16
71.3 mm
46.0 mm
28.6 mm
36.5 mm
UNF-2A
UNF-2B
3.19”
2.02”
1.38”
1.69”
1-1/16-12
1-1/16-12
81.1 mm
51.3 mm
35.0 mm
42.9 mm
UN-2A
UN-2B
3.40”
2.19”
1.62”
1.88”
1-5/16-12
1-5/16-12
86.3 mm
55.6 mm
41.3 mm
47.6 mm
UN-2A
UN-2B
Male SAE O-Ring Straight Thread - Female SAE Straight Thread
A
Part Number
B
PS410510-4-4
Hex 2
Hex 1
PS610510-6-6
Port 1
Port 2
PS810510-8-8
PS1210510-12-12
PS1610510-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.56”
1.72”
.75”
1.19”
7/16-20
7/16-20
65.0 mm
43.7 mm
19.0 mm
30.2 mm
UNF-2A
UNF-2B
2.56”
1.72”
.88”
1.31”
9/16-18
9/16-18
65.0 mm
43.7 mm
22.2 mm
33.3 mm
UNF-2A
UNF-2B
2.79”
1.79”
1.12”
1.50”
3/4-16
3/4-16
70.8 mm
45.5 mm
28.6 mm
36.5 mm
UNF-2A
UNF-2B
3.25”
2.08”
1.38”
1.69”
1-1/16-12
1-1/16-12
82.6 mm
52.8 mm
35.0 mm
42.9 mm
UN-2A
UN-2B
3.41”
2.20”
1.62”
1.88”
1-5/16-12
1-5/16-12
86.5 mm
55.9 mm
41.3 mm
47.6 mm
UN-2A
UN-2B
Male SAE O-Ring Straight Thread - O-Ring Face Seal
Part Number
A
Hex 1
B
PS4105JM-4-4
Hex 2
PS6105JM-6-6
Port 1
Port 2
PS8105JM-8-8
PS8105JM-10-10
PS12105JM-12-12
PS16105JM-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.59”
1.75”
.75”
1.19”
7/16-20
9/16-18
65.8 mm
44.5 mm
19.0 mm
30.2 mm
UNF-2A
UNF-2A
2.59”
1.75”
.88”
1.31”
9/16-18
11/16-16
65.8 mm
44.5 mm
22.2 mm
33.3 mm
UNF-2A
UNF-2A
2.90”
1.90”
1.12”
1.50”
3/4-16
13/16-16
73.6 mm
48.3 mm
28.6 mm
36.5 mm
UNF-2A
UNF-2A
3.05”
1.99”
1.12”
1.50”
7/8-14
1-14
77.4 mm
50.5 mm
28.6 mm
36.5 mm
UNF-2A
UNF-2A
1-3/16-12
3.26”
2.09”
1.38”
1.69”
1-1/16-12
82.8 mm
53.1 mm
35.0 mm
42.9 mm
UN-2A
UN-2A
3.41”
2.20”
1.62”
1.88”
1-5/16-12
1-7/16-12
86.5 mm
55.9 mm
41.3 mm
47.6 mm
UN-2A
UN-2A
D-11
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
D Swivels
Male SAE O-Ring Straight Thread - Female 37° Flare
In-Line
Swivels
PS Series
Female SAE Straight Thread - Female Pipe
A
Part Number
B
Hex 2
Hex 1
PS411002-4-4
PS611002-6-6
Port 2
Port 1
PS811002-8-8
PS1211002-12-12
PS1611002-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.16”
1.60”
.75”
1.19”
7/16-20
1/4-18
55.0 mm
40.6 mm
19.0 mm
30.2 mm
UNF-2B
NPTF
2.30”
1.64”
.88”
1.31”
9/16-18
3/8-18
58.3 mm
41.7 mm
22.2 mm
33.3 mm
UNF-2B
NPTF
2.56”
1.79”
1.12”
1.50”
3/4-16
1/2-14
65.0 mm
45.5 mm
28.6 mm
36.5 mm
UNF-2B
NPTF
2.88”
1.85”
1.38”
1.69”
1-1/16-12
3/4-14
73.1 mm
47.0 mm
35.0 mm
42.9 mm
UN-2B
NPTF
3.16”
2.11”
1.62”
1.88”
1-5/16-12
1-11 1/2
80.1 mm
53.5 mm
41.3 mm
47.6 mm
UN-2B
NPTF
Female SAE Straight Thread - Male 37° Flare
A
Part Number
PS411003-4-4
B
Hex 2
Hex 1
PS611003-6-6
Port 2
PS811003-8-8
Port 1
PS1211003-12-12
D Swivels
PS1611003-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.43”
1.87”
.75”
1.19”
7/16-20
7/16-20
61.8 mm
47.5 mm
19.0 mm
30.2 mm
UNF-2B
UNF-2A
2.56”
1.90”
.88”
1.31”
9/16-18
9/16-18
65.0 mm
48.3 mm
22.2 mm
33.3 mm
UNF-2B
UNF-2A
2.86”
2.09”
1.12”
1.50”
3/4-16
3/4-16
72.7 mm
53.1 mm
28.6 mm
36.5 mm
UNF-2B
UNF-2A
3.33”
2.30”
1.38”
1.69”
1-1/16-12
1-1/16-12
84.5 mm
58.4 mm
35.0 mm
42.9 mm
UN-2B
UN-2A
3.50”
2.45”
1.62”
1.88”
1-5/16-12
1-5/16-12
88.9 mm
62.2 mm
41.3 mm
47.6 mm
UN-2B
UN-2A
Female SAE Straight Thread - Female 37° Flare
A
Part Number
B
Hex 1
PS411006-4-4
Hex 2
PS611006-6-6
Port 2
Port 1
PS811006-8-8
PS1211006-12-12
PS1611006-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.29”
1.73”
.75”
1.19”
7/16-20
7/16-20
58.3 mm
43.9 mm
19.0 mm
30.2 mm
UNF-2B
UNF-2B
2.41”
1.75”
.88”
1.31”
9/16-18
9/16-18
61.1 mm
44.5 mm
22.2 mm
33.3 mm
UNF-2B
UNF-2B
2.58”
1.81”
1.12”
1.50”
3/4-16
3/4-16
65.6 mm
46.0 mm
28.6 mm
36.5 mm
UNF-2B
UNF-2B
3.05”
2.02”
1.38”
1.69”
1-1/16-12
1-1/16-12
77.4 mm
51.3 mm
35.0 mm
42.9 mm
UN-2B
UN-2B
3.24”
2.19”
1.62”
1.88”
1-5/16-12
1-5/16-12
82.3 mm
55.6 mm
41.3 mm
47.6 mm
UN-2B
UN-2B
Female SAE Straight Thread - Female SAE Straight Thread
A
Part Number
B
Hex 1
Hex 2
PS411010-4-4
PS611010-6-6
Port 2
Port 1
PS811010-8-8
PS1211010-12-12
PS1611010-16-16
3 Piece Design
A
B
Hex 1
Hex 2
Port 1
Port 2
2.28”
1.72”
.75”
1.19”
7/16-20
7/16-20
58.0 mm
43.7 mm
19.0 mm
30.2 mm
UNF-2B
UNF-2B
2.38”
1.72”
.88”
1.31”
9/16-18
9/16-18
60.4 mm
43.7 mm
22.2 mm
33.3 mm
UNF-2B
UNF-2B
2.56”
1.79”
1.12”
1.50”
3/4-16
3/4-16
65.0 mm
45.5 mm
28.6 mm
36.5 mm
UNF-2B
UNF-2B
3.11”
2.08”
1.38”
1.69”
1-1/16-12
1-1/16-12
78.9 mm
52.8 mm
35.0 mm
42.9 mm
UN-2B
UN-2B
3.25”
2.20”
1.62”
1.88”
1-5/16-12
1-5/16-12
82.6 mm
55.9 mm
41.3 mm
47.6 mm
UN-2B
UN-2B
A
B
Port 2
Part Number
PS2411010-20-20
Port 1
Dia
PS2411010-24-24
PS3211010-32-32
A
B
C
D
Wrench Flats
Dia.
Port 1
Port 2
5.91"
4.63"
3.43"
1.27"
2.63"
3.36"
1 5/8-12
1 5/8-12
150.2 mm
117.5 mm
87.0 mm
32.3 mm
66.7 mm
85.2 mm
UN-2B
UN-2B
5.91"
4.63"
3.43"
1.27"
2.63"
3.36"
1 7/8-12
1 7/8-12
150.2 mm
117.5 mm
87.0 mm
32.3 mm
66.7 mm
85.2 mm
UN-2B
UN-2B
6.83"
5.45"
3.93"
1.52"
3.06"
4.19"
2 1/2-12
2-1/2-12
173.6 mm
138.4 mm
99.7 mm
38.5 mm
77.6 mm
106.4 mm
UN-2B
UN-2B
Wrench Flats
D-12
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
In-Line
Swivels
PS Series
Female SAE Straight Thread - O-Ring Face Seal
A
Part Number
B
PS4110JM-4-4
Hex 2
Hex 1
PS6110JM-6-6
Port 2
Port 1
PS8110JM-8-8
PS12110JM-12-12
PS16110JM-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.31”
1.75”
.75”
1.19”
7/16-20
9/16-18
58.8 mm
44.5 mm
19.0 mm
30.2 mm
UNF-2B
UNF-2A
2.41”
1.75”
.88”
1.31”
9/16-18
11/16-16
61.1 mm
44.5 mm
22.2 mm
33.3 mm
UNF-2B
UN-2A
2.67”
1.90”
1.12”
1.50”
3/4-16
13/16-16
67.9 mm
48.3 mm
28.6 mm
36.5 mm
UNF-2B
UN-2A
3.12”
2.09”
1.38”
1.69”
1-1/16-12
1-3/16-12
79.2 mm
53.1 mm
35.0 mm
42.9 mm
UN-2B
UN-2A
3.25”
2.20”
1.62”
1.88”
1-5/16-12
1-7/16-12
82.6 mm
55.9 mm
41.3 mm
47.6 mm
UN-2B
UN-2A
A
Part Number
B
Hex 1
Hex 2
PS41JM02-4-4
PS61JM02-6-6
Port 1
Port 2
PS81JM02-8-8
PS121JM02-12-12
PS161JM02-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.44”
1.60”
.75”
1.19”
9/16-18
1/4-18
62.1 mm
40.6 mm
19.0 mm
30.2 mm
UNF-2A
NPTF
2.48”
1.64”
.88”
1.31”
11/16-16
3/8-18
63.0 mm
41.7 mm
22.2 mm
33.3 mm
UN-2A
NPTF
2.79”
1.79”
1.12”
1.50”
13/16-16
1/2-14
70.8 mm
45.5 mm
28.6 mm
36.5 mm
UN-2A
NPTF
3.02”
1.85”
1.38”
1.69”
1-3/16-12
3/4-14
76.7 mm
47.0 mm
35.0 mm
42.9 mm
UN-2A
NPTF
3.31”
2.11”
1.62”
1.88”
1-7/16-12
1-11 1/2
84.1 mm
53.5 mm
41.3 mm
47.6 mm
UN-2A
NPTF
O-Ring Face Seal - Male 37° Flare
Part Number
A
B
Hex 1
PS41JM03-4-4
Hex 2
PS61JM03-6-6
Port 1
Port 2
PS81JM03-8-8
PS81JM03-10-10
PS121JM03-12-12
PS161JM03-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.71”
1.87”
.75”
1.19”
9/16-18
7/16-20
68.9 mm
47.5 mm
19.0 mm
30.2 mm
UN-2A
UN-2A
2.74”
1.90”
.88”
1.31”
11/16-16
9/16-18
69.6 mm
48.3 mm
22.2 mm
33.3 mm
UN-2A
UN-2A
3.09”
2.09”
1.12”
1.50”
13/16-16
3/4-16
78.4 mm
53.1 mm
28.6 mm
36.5 mm
UN-2A
UN-2A
3.29”
2.19”
1.12”
1.50”
1-14
7/8-14
83.7 mm
55.6 mm
28.6 mm
36.5 mm
UN-2A
UN-2A
3.47”
2.30”
1.38”
1.69”
1-3/16-12
1-1/16-12
88.2 mm
58.4 mm
35.0 mm
42.9 mm
UNF-2A
UNF-2A
3.66”
2.45”
1.62”
1.88”
1-7/16-12
1-5/16-12
92.9 mm
62.2 mm
41.3 mm
47.6 mm
UNF-2A
UNF-2A
O-Ring Face Seal - Female 37° Flare
A
Part Number
B
Hex 1
Hex 2
PS41JM06-4-4
PS61JM06-6-6
Port 1
Port 2
PS81JM06-8-8
PS121JM06-12-12
PS161JM06-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.57”
1.73”
.75”
1.19”
9/16-18
7/16-20
65.4 mm
43.9 mm
19.0 mm
30.2 mm
UNF-2A
UNF-2B
2.59”
1.75”
.88”
1.31”
11/16-16
9/16-18
65.8 mm
44.5 mm
22.2 mm
33.3 mm
UNF-2A
UNF-2B
2.81”
1.81”
1.12”
1.44”
13/16-16
3/4-16
71.3 mm
46.0 mm
28.6 mm
36.5 mm
UNF-2A
UNF-2B
3.19”
2.02”
1.38”
1.69”
1-3/16-12
1-1/16-12
81.1 mm
51.3 mm
35.0 mm
42.9 mm
UN-2A
UN-2B
3.40”
2.19”
1.62”
1.88”
1-7/16-12
1-5/16-12
86.3 mm
55.6 mm
41.3 mm
47.6 mm
UN-2A
UN-2B
D-13
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
D Swivels
O-Ring Face Seal - Female Pipe
In-Line
Swivels
PS Series
O-Ring Face Seal - Female SAE Straight Thread
Part Number
A
PS41JM10-4-4
B
Hex 1
Hex 2
PS61JM10-6-6
Port 1
Port 2
PS81JM10-8-8
PS121JM10-12-12
PS161JM10-16-16
A
B
Hex 1
Hex 2
Port 1
Port 2
2.56”
1.72”
.75”
1.19”
9/16-18
7/16-20
65.0 mm
43.7 mm
19.0 mm
30.2 mm
UNF-2A
UNF-2B
2.56”
1.72”
.88”
1.31”
11/16-16
9/16-18
65.0 mm
43.7 mm
22.2 mm
33.3 mm
UN-2A
UNF-2B
2.79”
1.79”
1.12”
1.50”
13/16-16
3/4-16
70.8 mm
45.5 mm
28.6 mm
36.5 mm
UN-2A
UNF-2B
3.25”
2.08”
1.38”
1.69”
1-3/16-12
1-1/16-12
82.6 mm
52.8 mm
35.0 mm
42.9 mm
UN-2A
UN-2B
3.41”
2.20”
1.62”
1.88”
1-7/16-12
1-5/16-12
86.5 mm
55.9 mm
41.3 mm
47.6 mm
UN-2A
UN-2B
O-Ring Face Seal - O-Ring Face Seal
Part Number
A
B
Hex 1
PS41JMJM-4-4
Hex 2
PS61JMJM-6-6
Port 1
Port 2
PS81JMJM-8-8
PS121JMJM-12-12
B
Hex 1
Hex 2
Port 1
Port 2
1.75”
.75”
1.19”
9/16-18
9/16-18
65.8 mm
44.5 mm
19.0 mm
30.2 mm
UNF-2A
UNF-2A
2.59”
1.75”
.88”
1.31”
11/16-16
11/16-16
65.8 mm
44.5 mm
22.2 mm
33.3 mm
UN-2A
UN-2A
2.90”
1.90”
1.12”
1.50”
13/16-16
13/16-16
73.6 mm
48.3 mm
28.6 mm
36.5 mm
UN-2A
UN-2A
3.26”
2.09”
1.38”
1.69”
1-3/16-12
1-3/16-12
82.8 mm
53.1 mm
35.0 mm
42.9 mm
UN-2A
UN-2A
3.41”
2.20”
1.62”
1.88”
1-7/16-12
1-7/16-12
86.5 mm
55.9 mm
41.3 mm
47.6 mm
UN-2A
UN-2A
D Swivels
PS161JMJM-16-16
A
2.59”
D-14
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
90°
Swivels
PS Series
Port 2
Hex 2
Hex 1
Port 1
O-Ring
Housing
O-Ring
Back-Up Ring
Cap Screw
Bearing
O-Ring
Shaft
Materials Of Construction
Housing*: ............................................................Carbon Steel
Shaft*:.................................................................Carbon Steel
Plating*: .........................................Zinc with Yellow Chromate
Bearing*: .....................................................................Chrome
O-Rings*:........................................................................Nitrile
Back-Up Ring: ................................................................PTFE
D Swivels
* See How-To-Order for optional material plating and seals.
Male Pipe - Female Pipe
A
Part Number
B
PS490102-4-4
Hex 1
Port 2
PS690102-6-6
Port 1
PS890102-8-8
DIA
PS1290102-12-12
PS1690102-16-16
A
B
Dia.
Hex 1
Port 1
Port 2
2.85”
2.44”
1.20”
.75”
1/4-18
1/4-18
72.3 mm
62.0 mm
30.5 mm
19.0 mm
NPTF
NPTF
3.05”
2.54”
1.29”
.88”
3/8-18
3/8-18
77.4 mm
64.4 mm
32.8 mm
22.2 mm
NPTF
NPTF
3.43”
2.84”
1.49”
1.12”
1/2-14
1/2-14
87.0 mm
72.0 mm
37.8 mm
28.6 mm
NPTF
NPTF
3.66”
3.00”
1.76”
1.38”
3/4-14
3/4-14
93.0 mm
76.1 mm
44.6 mm
35.0 mm
NPTF
NPTF
4.41”
3.54”
2.16”
1.62”
1-11 1/2
1-11 1/2
112.0 mm
90.0 mm
54.9 mm
41.3 mm
NPTF
NPTF
Male Pipe - Male 37° Flare
A
Port 2
B
DIA
Part Number
PS490103-4-4
Hex 2
PS690103-6-6
Hex 1
C
Port 1
D
PS890103-8-8
PS1290103-12-12
PS1690103-16-16
A
B
C
D
Dia
Hex 1
Hex 2
Port 1
Port 2
2.85”
2.44”
1.39”
1.99”
1.20”
.75”
.56”
1/4-18
7/16-20
72.3 mm
62.0 mm
35.2 mm
50.5 mm
30.5 mm
19.0 mm
14.3 mm
NPTF
UNF-2A
3.05”
2.54”
1.44”
2.09”
1.29”
.88”
.69”
3/8-18
9/16-18
77.4 mm
64.4 mm
36.6 mm
53.0 mm
32.8 mm
22.2 mm
17.5 mm
NPTF
UNF-2A
3.43”
2.84”
1.78”
2.64”
1.73”
1.12”
.88”
1/2-14
3/4-16
87.0 mm
72.0 mm
45.1 mm
67.1 mm
44.0 mm
28.6 mm
22.2 mm
NPTF
UNF-2A
3.66”
3.00”
2.24”
3.86”
2.17”
1.38”
1.25”
3/4-14
1-1/16-12
93.0 mm
76.1 mm
56.9 mm
85.3 mm
55.2 mm
35.0 mm
31.8 mm
NPTF
UN-2A
4.41”
3.54”
2.42”
3.66”
2.48”
1.62”
1.50”
112.0 mm
90.0 mm
61.3 mm
92.9 mm
63.0 mm
41.3 mm
38.1 mm
D-15
1-11 1/2 1-5/16-12
NPTF
UN-2A
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
90°
Swivels
PS Series
Male Pipe - Male SAE O-Ring Straight Thread
Part Number
A
B
DIA
Port 2
Hex 2
PS490105-4-4
PS690105-6-6
Hex 1
C
Port 1
PS890105-8-8
D
PS1290105-12-12
PS1690105-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.85”
2.44”
1.38”
1.98”
1.20”
.75”
.56”
1/4-18
7/16-20
72.3 mm
62.0 mm
35.0 mm
50.2 mm
30.5 mm
19.0 mm
14.3 mm
NPTF
UNF-2A
3.05”
2.54”
1.55”
2.20”
1.29”
.88”
.69”
3/8-18
9/16-18
77.4 mm
64.4 mm
39.4 mm
55.8 mm
32.8 mm
22.2 mm
17.5 mm
NPTF
UNF-2A
3.43”
2.84”
1.86”
2.72”
1.73”
1.12”
.88”
1/2-14
3/4-16
87.0 mm
72.0 mm
47.2 mm
69.2 mm
44.0 mm
28.6 mm
22.2 mm
NPTF
UNF-2A
3.66”
3.00”
2.40”
3.49”
2.17”
1.38”
1.25”
3/4-14
1-1/16-12
93.0 mm
76.1 mm
61.0 mm
88.5 mm
55.2 mm
35.0 mm
31.8 mm
NPTF
UN-2A
4.41”
3.54”
2.50”
3.74”
2.48”
1.62”
1.50”
112.0 mm
90.0 mm
63.4 mm
94.9 mm
63.0 mm
41.3 mm
38.1 mm
1-11 1/2 1-5/16-12
NPTF
UN-2A
Male Pipe - Female 37° Flare
A
Part Number
Port 2
DIA
B
Hex 2
PS490106-4-4
PS690106-6-6
Hex 1
C
Port 1
PS890106-8-8
D
D Swivels
PS1290106-12-12
PS1690106-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.85”
2.44”
1.47”
2.07”
1.20”
.75”
.56”
1/4-18
7/16-20
72.3 mm
62.0 mm
37.3 mm
52.5 mm
30.5 mm
19.0 mm
14.3 mm
NPTF
UNF-2B
3.05”
2.54”
1.57”
2.22”
1.29”
.88”
.69”
3/8-18
9/16-18
77.4 mm
64.4 mm
39.9 mm
56.3 mm
32.8 mm
22.2 mm
17.5 mm
NPTF
UNF-2B
3.43”
2.84”
1.91”
2.77”
1.73”
1.12”
.88”
1/2-14
3/4-16
87.0 mm
72.0 mm
48.4 mm
70.4 mm
44.0 mm
28.6 mm
22.2 mm
NPTF
UNF-2B
3.66”
3.00”
2.34”
3.43”
2.17”
1.38”
1.25”
3/4-14
1-1/16-12
93.0 mm
76.1 mm
59.4 mm
87.0 mm
55.2 mm
35.0 mm
31.8 mm
NPTF
UN-2B
4.41”
3.54”
2.54”
3.79”
2.48”
1.62”
1.50”
112.0 mm
90.0 mm
64.6 mm
96.2 mm
63.0 mm
41.3 mm
38.1 mm
1-11 1/2 1-5/16-12
NPTF
UN-2B
Male Pipe - Female NPSM Pipe Swivel
Part Number
A
B
Hex 1
DIA
Port 2
PS490107-4-4
PS690107-6-6
Hex 2
C
Port 1
PS890107-8-8
D
PS1290107-12-12
PS1690107-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.85”
2.44”
1.48”
2.08”
1.20”
.75”
.69”
1/4-18
1/4-18
72.3 mm
62.0 mm
37.5 mm
52.8 mm
30.5 mm
19.0 mm
17.4 mm
NPTF
NPSM
3.05”
2.54”
1.51”
2.16”
1.29”
.88”
.88”
3/8-18
3/8-18
77.4 mm
64.4 mm
38.4 mm
54.8 mm
32.8 mm
22.2 mm
22.2 mm
NPTF
NPSM
3.43”
2.84”
1.86”
2.72”
1.73”
1.12”
1.00”
1/2-14
1/2-14
87.0 mm
72.0 mm
47.2 mm
69.2 mm
44.0 mm
28.6 mm
25.4 mm
NPTF
NPSM
3.66”
3.00”
2.24”
3.33”
2.17”
1.38”
1.25”
3/4-14
3/4-14
93.0 mm
76.1 mm
56.9 mm
84.5 mm
55.2 mm
35.0 mm
31.8 mm
NPTF
NPSM
4.41”
3.54”
2.48”
3.73”
2.48”
1.62”
1.50”
1-11 1/2
1-11 1/2
112.0 mm
90.0 mm
63.1 mm
94.6 mm
63.0 mm
41.3 mm
38.1 mm
NPTF
NPSM
Male Pipe - Female SAE Straight Thread
Part Number
A
Hex 1
B
Port 2
PS490110-4-4
PS690110-6-6
Port 1
DIA
PS890110-8-8
PS1290110-12-12
PS1690110-16-16
A
B
Dia.
Hex 1
Port 1
Port 2
2.85”
2.44”
1.20”
.75”
1/4-18
7/16-20
72.3 mm
62.0 mm
30.5 mm
19.0 mm
NPTF
UNF-2B
3.05”
2.54”
1.29”
.88”
3/8-18
9/16-18
77.4 mm
64.4 mm
32.8 mm
22.2 mm
NPTF
UNF-2B
3.43”
2.84”
1.73”
1.12”
1/2-14
3/4-16
87.0 mm
72.0 mm
44.0 mm
28.6 mm
NPTF
UNF-2B
3.66”
3.00”
2.17”
1.38”
3/4-14
1-1/16-12
93.0 mm
76.1 mm
55.2 mm
35.0 mm
NPTF
UN-2B
4.41”
3.54”
2.48”
1.62”
1-11 1/2
1-5/16-12
112.0 mm
90.0 mm
63.0 mm
41.3 mm
NPTF
UN-2B
D-16
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
90°
Swivels
PS Series
Male Pipe - O-Ring Face Seal
Part Number
A
PS4901JM-4-4
DIA
Port 2
B
Hex 2
PS6901JM-6-6
Hex 1
C
Port 1
PS8901JM-8-8
D
PS12901JM-12-12
PS16901JM-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.85”
2.44”
1.29”
1.89”
1.20”
.75”
.56”
1/4-18
9/16-18
72.3 mm
62.0 mm
32.5 mm
47.9 mm
30.5 mm
19.0 mm
14.3 mm
NPTF
UNF-2A
3.05”
2.54”
1.40”
2.05”
1.29”
.88”
.69”
3/8-18
11/16-16
77.4 mm
64.4 mm
35.6 mm
52.0 mm
32.8 mm
22.2 mm
17.5 mm
NPTF
UN-2A
3.43”
2.84”
1.74”
2.60”
1.73”
1.12”
.88”
1/2-14
13/16-16
87.0 mm
72.0 mm
44.1 mm
66.1 mm
44.0 mm
28.6 mm
22.2 mm
NPTF
UN-2A
3.66”
3.00”
2.18”
3.27”
2.17”
1.38”
1.25”
3/4-14
1-3/16-12
93.0 mm
76.1 mm
55.4 mm
83.0 mm
55.2 mm
35.0 mm
31.8 mm
NPTF
UN-2A
4.41”
3.54”
2.34”
3.59”
2.48”
1.62”
1.50”
112.0 mm
90.0 mm
59.6 mm
91.1 mm
63.0 mm
41.3 mm
38.1 mm
1-11 1/2 1-7/16-12
NPTF
UN-2A
A
Part Number
B
PS490202-4-4
Port 2
Hex 1
PS690202-6-6
Port 1
DIA
PS890202-8-8
PS1290202-12-12
PS1690202-16-16
3 Piece Design
A
B
Dia
Hex 1
Port 1
Port 2
2.42”
2.01”
1.20”
.75”
1/4-18
1/4-18
61.4 mm
51.2 mm
30.5 mm
19.0 mm
NPTF
NPTF
2.68”
2.17”
1.29”
.88”
3/8-18
3/8-18
68.2 mm
55.2 mm
32.8 mm
22.2 mm
NPTF
NPTF
2.96”
2.37”
1.49”
1.12”
1/2-14
1/2-14
75.3 mm
60.3 mm
37.8 mm
28.6 mm
NPTF
NPTF
3.43”
2.77”
1.76”
1.38”
3/4-14
3/4-14
87.2 mm
70.4 mm
44.6 mm
35.0 mm
NPTF
NPTF
4.03”
3.16”
2.16”
1.62”
1-11 1/2
1-11 1/2
102.3 mm
80.3 mm
54.9 mm
41.3 mm
NPTF
NPTF
A
B
D
Part Number
Port 2
C
PS2490202-20-20
Port 1
PS2490202-24-24
Dia
PS3290202-32-32
Wrench Flats
A
B
C
D
Wrench Flats
Dia.
5.91"
4.63"
3.43"
1.27"
2.63"
3.36"
Port 1
Port 2
150.2 mm
117.5 mm
87.0 mm
32.3 mm
66.7 mm
85.2 mm
5.91"
4.63"
3.43"
1.27"
2.63"
3.36"
150.2 mm
117.5 mm
87.0 mm
32.3 mm
66.7 mm
85.2 mm
NPTF
NPTF
6.75"
5.45"
3.93"
1.52"
3.06"
4.19"
2 11-1/2
2 11-1/2
171.5 mm
138.4 mm
99.7 mm
38.5 mm
77.6 mm
106.4 mm
NPTF
NPTF
1 1/4-11 1/2 1 1/4-11 1/2
NPTF
NPTF
1 1/2-11 1/2 1 1/2-11 1/2
Female Pipe - Male 37° Flare
Part Number
A
DIA
B
PS490203-4-4
Port 2
Hex 2
PS690203-6-6
Hex 1
C
PS890203-8-8
D
Port 1
PS1290203-12-12
PS1690203-16-16
3 Piece Design
A
B
C
D
Dia
Hex 1
Hex 2
Port 1
Port 2
2.42”
2.01”
1.39”
1.99”
1.20”
.75”
.56”
1/4-18
7/16-20
61.4 mm
51.2 mm
35.2 mm
50.5 mm
30.5 mm
19.0 mm
14.3 mm
NPTF
UNF-2A
2.68”
2.17”
1.44”
2.09”
1.29”
.88”
.69”
3/8-18
9/16-18
68.2 mm
55.2 mm
36.6 mm
53.0 mm
32.8 mm
22.2 mm
17.5 mm
NPTF
UNF-2A
2.96”
2.37”
1.78”
2.64”
1.73”
1.12”
.88”
1/2-14
3/4-16
75.3 mm
60.3 mm
45.1 mm
67.1 mm
44.0 mm
28.6 mm
22.2 mm
NPTF
UNF-2A
3.43”
2.77”
2.24”
3.86”
2.17”
1.38”
1.25”
3/4-14
1-1/16-12
87.2 mm
70.4 mm
56.9 mm
85.3 mm
55.2 mm
35.0 mm
31.8 mm
NPTF
UN-2A
4.03”
3.16”
2.42”
3.66”
2.48”
1.62”
1.50”
102.3 mm
80.3 mm
61.3 mm
92.9 mm
63.0 mm
41.3 mm
38.1 mm
1-11 1/2 1-5/16-12
NPTF
UN-2A
A
Hex
B
Port 2
C
Part Number
PS2490203-20-20
Port 1
B
C
D
E
Hex
Wrench Flats
4.63"
3.43"
2.85"
4.53"
1.88"
2.63"
3.36" 1 1/4-11 1/2
87.0 mm
72.4 mm
115.0 mm
47.6 mm
66.7 mm
85.2 mm
3.43"
3.05"
4.73"
2.13"
2.63"
87.0 mm
77.6 mm
120.2 mm
54.0 mm
66.7 mm
85.2 mm
NPTF
UN-2A
3.93"
3.70"
5.80"
2.75"
3.06"
4.19"
2 11-1/2
2 1/2-12
69.8 mm
77.6 mm
106.4 mm
NPTF
UN-2A
150.2 mm 117.5 mm
D
PS2490203-24-24
5.94"
4.65"
150.9 mm 118.2 mm
E
Dia
A
5.91"
PS3290203-32-32
6.82"
5.51"
173.1 mm 140.0 mm
99.7 mm
94.0 mm 147.2 mm
Dia.
Port 1
NPTF
3.36" 1 1/2-11 1/2
Port 2
1 5/8-12
UN-2A
17/8-12
Wrench Flats
D-17
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
D Swivels
Female Pipe - Female Pipe
90°
Swivels
PS Series
Female Pipe - Male SAE O-Ring Straight Thread
A
DIA
Port 2
B
Part Number
PS490205-4-4
Hex 2
Hex 1
PS690205-6-6
C
D
Port 1
PS890205-8-8
PS1290205-12-12
PS1690205-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.42”
2.01”
1.38”
1.98”
1.20”
.75”
.56”
1/4-18
7/16-20
61.4 mm
51.2 mm
35.0 mm
50.2 mm
30.5 mm
19.0 mm
14.3 mm
NPTF
UNF-2A
2.68”
2.17”
1.55”
2.20”
1.29”
.88”
.69”
3/8-18
9/16-18
68.2 mm
55.2 mm
39.4 mm
55.8 mm
32.8 mm
22.2 mm
17.5 mm
NPTF
UNF-2A
2.96”
2.37”
1.86”
2.72”
1.73”
1.12”
.88”
1/2-14
3/4-16
75.3 mm
60.3 mm
47.2 mm
69.2 mm
44.0 mm
28.6 mm
22.2 mm
NPTF
UNF-2A
3.43”
2.77”
2.40”
3.49”
2.17”
1.38”
1.25”
3/4-14
1-1/16-12
87.2 mm
70.4 mm
61.0 mm
88.5 mm
55.2 mm
35.0 mm
31.8 mm
NPTF
UN-2A
4.03”
3.16”
2.50”
3.74”
2.48”
1.62”
1.50”
102.3 mm
80.3 mm
63.4 mm
94.9 mm
63.0 mm
41.3 mm
38.1 mm
1-11 1/2 1-5/16-12
NPTF
UN-2A
Female Pipe - Female 37° Flare
A
Part Number
Port 2
DIA
B
PS490206-4-4
Hex 2
PS690206-6-6
Hex 1
C
PS890206-8-8
D
Port 1
PS1290206-12-12
D Swivels
PS1690206-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.42”
2.01”
1.47”
2.07”
1.20”
.75"
.56”
1/4-18
7/16-20
61.4 mm
51.2 mm
37.3 mm
52.5 mm
30.5 mm
19.0 mm
14.3 mm
NPTF
UNF-2A
2.68”
2.17”
1.57”
2.22”
1.29”
.88”
.69”
3/8-18
9/16-18
68.2 mm
55.2 mm
39.9 mm
56.3 mm
32.8 mm
22.2 mm
17.5 mm
NPTF
UNF-2A
2.96”
2.37”
1.91”
2.77”
1.73”
1.12”
.88”
1/2-14
3/4-16
75.3 mm
60.3 mm
48.4 mm
70.4 mm
44.0 mm
28.6 mm
22.2 mm
NPTF
UNF-2A
3.43”
2.77”
2.34”
3.43”
2.17”
1.38”
1.25”
3/4-14
1-1/16-12
87.2 mm
70.4 mm
59.4 mm
87.0 mm
55.2 mm
35.0 mm
31.8 mm
NPTF
UN-2A
4.03”
3.16”
2.54”
3.79”
2.48”
1.62”
1.50”
102.3 mm
80.3 mm
64.6 mm
96.2 mm
63.0 mm
41.3 mm
38.1 mm
1-11 1/2 1-5/16-12
NPTF
UN-2A
Female Pipe - Female NPSM Pipe Swivel
A
Port 2
DIA
B
Hex 1
Part Number
PS490207-4-4
PS690207-6-6
Hex 2
C
PS890207-8-8
D
Port 1
PS1290207-12-12
PS1690207-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.42”
2.01”
1.48”
2.08”
1.20”
.75”
.69”
1/4-18
1/4-18
61.4 mm
51.2 mm
37.5 mm
52.8 mm
30.5 mm
19.0 mm
17.4 mm
NPTF
NPSM
2.68”
2.17”
1.51”
2.16”
1.29”
.88”
.88”
3/8-18
3/8-18
68.2 mm
55.2 mm
38.4 mm
54.8 mm
32.8 mm
22.2 mm
22.2 mm
NPTF
NPSM
2.96”
2.37”
1.86”
2.72”
1.73”
1.12”
1.00”
1/2-14
1/2-14
75.3 mm
60.3 mm
47.2 mm
69.2 mm
44.0 mm
28.6 mm
25.4 mm
NPTF
NPSM
3.43”
2.77”
2.24”
3.33”
2.17”
1.38”
1.25”
3/4-14
3/4-14
87.2 mm
70.4 mm
56.9 mm
84.5 mm
55.2 mm
35.0 mm
31.8 mm
NPTF
NPSM
4.03”
3.16”
2.48”
3.73”
2.48”
1.62”
1.50”
1-11 1/2
1-11 1/2
102.3 mm
80.3 mm
63.1 mm
94.6 mm
63.0 mm
41.3 mm
38.1 mm
NPTF
NPSM
Female Pipe - Female SAE Straight Thread
A
Part Number
A
B
Dia.
Hex 1
Port 1
Port 2
2.42”
2.01”
1.20”
.75”
1/4-18
7/16-20
61.4 mm
51.2 mm
30.5 mm
19.0 mm
NPTF
UNF-2B
2.68”
2.17”
1.29”
.88”
3/8-18
9/16-18
68.2 mm
55.2 mm
32.8 mm
22.2 mm
NPTF
UNF-2B
2.96”
2.37”
1.73”
1.12”
1/2-14
3/4-16
75.3 mm
60.3 mm
44.0 mm
28.6 mm
NPTF
UNF-2B
3.43”
2.77”
2.17”
1.38”
3/4-14
1-1/16-12
87.2 mm
70.4 mm
55.2 mm
35.0 mm
NPTF
UN-2B
4.03”
3.16”
2.48”
1.62”
1-11 1/2
1-5/16-12
102.3 mm
80.3 mm
63.0 mm
41.3 mm
NPTF
UN-2B
B
Hex 1
Port 2
PS490210-4-4
PS690210-6-6
Port 1
DIA
PS890210-8-8
PS1290210-12-12
3 Piece Design
PS1690210-16-16
A
B
C
D
Part Number
A
B
C
D
Wrench Flats
Dia.
Port 1
Port 2
5.91"
4.63"
3.43"
1.27"
2.63"
3.36"
1 1/4-11 1/2
1 5/8-12
150.2 mm
117.5 mm
87.0 mm
32.3 mm
66.7 mm
85.2 mm
NPTF
UN-2B
5.91"
4.63"
3.43"
1.27"
2.63"
3.36"
1 1/4-11 1/2
1 5/8-12
150.2 mm
117.5 mm
87.0 mm
32.3 mm
66.7 mm
85.2 mm
NPTF
UN-2B
6.75"
5.45"
3.93"
1.52"
3.06"
4.19"
2 11-1/2
2-1/2-12
171.5 mm
138.4 mm
99.7 mm
38.5 mm
77.6 mm
106.4 mm
NPTF
UN-2B
Port 2
PS2490210-20-20
Port 1
Dia
PS2490210-24-24
PS3290210-32-32
Wrench Flats
D-18
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
90°
Swivels
PS Series
Female Pipe - O-Ring Face Seal
A
Port 2
Part Number
DIA
B
PS4902JM-4-4
Hex 2
Hex 1
PS6902JM-6-6
C
PS8902JM-8-8
D
Port 1
PS12902JM-12-12
PS16902JM-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.42”
2.01”
1.29”
1.89”
1.20”
.75”
.56”
1/4-18
9/16-18
61.4 mm
51.2 mm
32.5 mm
47.9 mm
30.5 mm
19.0 mm
14.3 mm
NPTF
UNF-2A
2.68”
2.17”
1.40”
2.05”
1.29”
.88”
.69”
3/8-18
11/16-16
68.2 mm
55.2 mm
35.6 mm
52.0 mm
32.8 mm
22.2 mm
17.5 mm
NPTF
UN-2A
2.96”
2.37”
1.74”
2.60”
1.73”
1.12”
.88”
1/2-14
13/16-16
75.3 mm
60.3 mm
44.1 mm
66.1 mm
44.0 mm
28.6 mm
22.2 mm
NPTF
UN-2A
3.43”
2.77”
2.18”
3.27”
2.17”
1.38”
1.25”
3/4-14
1-3/16-12
87.2 mm
70.4 mm
55.4 mm
83.0 mm
55.2 mm
35.0 mm
31.8 mm
NPTF
UN-2A
4.03”
3.16”
2.34”
3.59”
2.48”
1.62”
1.50”
102.3 mm
80.3 mm
59.6 mm
91.1 mm
63.0 mm
41.3 mm
38.1 mm
1-11 1/2 1-7/16-12
NPTF
UN-2A
A
Part Number
B
PS490302-4-4
Port 2
Hex 1
PS690302-6-6
Port 1
PS890302-8-8
DIA
PS1290302-12-12
3 Piece Design
PS1690302-16-16
A
B
Dia.
Hex 1
Port 1
Port 2
2.44”
1.20”
.75”
7/16-20
1/4-18
72.3 mm
62.0 mm
30.5 mm
19.0 mm
UNF-2A
NPTF
3.05”
2.54”
1.29”
.88”
9/16-18
3/8-18
77.4 mm
64.4 mm
32.8 mm
22.2 mm
UNF-2A
NPTF
3.29”
2.70”
1.49”
1.12”
3/4-16
1/2-14
83.7 mm
68.7 mm
37.8 mm
28.6 mm
UNF-2A
NPTF
3.76”
3.10”
1.76”
1.38”
1-1/16-12
3/4-14
95.6 mm
78.8 mm
44.6 mm
35.0 mm
UN-2A
NPTF
4.41”
3.54”
2.16”
1.62”
1-5/16-12
1-11 1/2
112.0 mm
90.0 mm
54.9 mm
41.3 mm
UN-2A
NPTF
D
B
Port 2
C
Port 1
A
2.85”
Part Number
PS2490302-20-20
Dia
PS2490302-24-24
PS3290302-32-32
Wrench Flats
A
B
C
D
Wrench Flats
Dia.
Port 1
Port 2
6.16"
4.63"
3.43"
1.27"
2.63"
3.36"
1 5/8-12
1 1/4-11 1/2
150.2 mm
117.5 mm
87.0 mm
32.3 mm
66.7 mm
85.2 mm
UN-2A
NPTF
6.16"
4.63"
3.43"
1.27"
2.63"
3.36"
1 7/8-12
1 1/2-11 1/2
150.2 mm
117.5 mm
87.0 mm
32.3 mm
66.7 mm
85.2 mm
UN-2A
NPTF
7.38"
5.45"
3.93"
1.52"
3.06"
4.19"
2 1/2-12
2-11-1/2
187.4 mm
138.4 mm
99.7 mm
38.5 mm
77.6 mm
106.4 mm
UN-2A
NPTF
Male 37° Flare - Male 37° Flare
Part Number
A
B
PS490303-4-4
DIA
Port 2
Hex 1
PS690303-6-6
Hex 2
C
Port 1
PS890303-8-8
D
PS890303-10-10
PS1290303-12-12
3 Piece Design
PS1690303-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.85”
2.44”
1.39”
1.99”
1.20”
.75”
.56”
7/16-20
7/16-20
72.3 mm
62.0 mm
35.2 mm
50.5 mm
30.5 mm
19.0 mm
14.3 mm
UNF-2A
UNF-2A
3.05”
2.54”
1.44”
2.09”
1.29”
.88”
.69”
9/16-18
9/16-18
77.4 mm
64.4 mm
36.6 mm
53.0 mm
32.8 mm
22.2 mm
17.5 mm
UNF-2A
UNF-2A
3.29”
2.70”
1.78”
2.64”
1.73”
1.12”
.88”
3/4-16
3/4-16
83.7 mm
68.7 mm
45.1 mm
67.1 mm
44.0 mm
28.6 mm
22.2 mm
UNF-2A
UNF-2A
3.39”
2.80”
1.90”
2.77”
1.73”
1.12”
.88”
7/8-14
7/8-14
86.2 mm
71.2 mm
48.4 mm
70.4 mm
44.0 mm
28.6 mm
22.2 mm
UNF-2A
UNF-2A
3.76”
3.10”
2.24”
3.86”
2.17”
1.38”
1.25”
95.6 mm
78.8 mm
56.9 mm
85.3 mm
55.2 mm
35.0 mm
31.8 mm
4.41”
3.54”
2.42”
3.66”
2.48”
1.62”
1.50”
112.0 mm
90.0 mm
61.3 mm
92.9 mm
63.0 mm
41.3 mm
38.1 mm
1-1/16-12 1-1/16-12
UN-2A
UN-2A
1-5/16-12 1-5/16-12
UN-2A
UN-2A
A
B
Port 2
Hex
C
Part Number
A
B
C
D
E
Hex
Wrench Flats
Dia.
Port 1
Port 2
6.16"
4.63"
3.43"
2.85"
4.53"
1.88"
2.63"
3.36"
1 5/8-12
1 5/8-12
87.0 mm
72.4 mm
115.0 mm
47.6 mm
66.7 mm
85.2 mm
UN-2A
UN-2A
3.43"
3.05"
4.73"
2.13"
2.63"
3.36"
1 7/8-12
17/8-12
87.0 mm
77.6 mm
120.2 mm
54.0 mm
66.7 mm
85.2 mm
UN-2A
UN-2A
3.93"
3.70"
5.80"
2.75"
3.06"
4.19"
2 1/2-12
2 1/2-12
99.7 mm
94.0 mm
147.2 mm
69.8 mm
77.6 mm
106.4 mm
UN-2A
UN-2A
Port 1
PS2490303-20-20
D
156.4 mm 117.5 mm
E
PS2490303-24-24
5.81"
4.65"
157.1 mm 118.2 mm
Dia
PS3290303-32-32
7.44"
5.51"
189.0 mm 140.0 mm
Wrench Flats
D-19
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
D Swivels
Male 37° Flare - Female Pipe
90°
Swivels
PS Series
Male 37° Flare - Male SAE O-Ring Straight Thread
Part Number
A
Port 2
B
Hex 1
DIA
PS490305-4-4
PS690305-6-6
Hex 2
C
Port 1
PS890305-8-8
D
PS1290305-12-12
PS1690305-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.85”
2.44”
1.38”
1.98”
1.20”
.75”
.56”
7/16-20
7/16-20
72.3 mm
62.0 mm
35.0 mm
50.2 mm
30.5 mm
19.0 mm
14.3 mm
UNF-2A
UNF-2A
3.05”
2.54”
1.55”
2.20”
1.29”
.88”
.69”
9/16-18
9/16-18
77.4 mm
64.4 mm
39.4 mm
55.8 mm
32.8 mm
22.2 mm
17.5 mm
UNF-2A
UNF-2A
3.29”
2.70”
1.86”
2.72”
1.73”
1.12”
.88”
3/4-16
3/4-16
83.7 mm
68.7 mm
47.2 mm
69.2 mm
44.0 mm
28.6 mm
22.2 mm
UNF-2A
UNF-2A
3.76”
3.10”
2.40”
3.49”
2.17”
1.38”
1.25”
95.6 mm
78.8 mm
61.0 mm
88.5 mm
55.2 mm
35.0 mm
31.8 mm
4.41”
3.54”
2.50”
3.74”
2.48”
1.62”
1.50”
112.0 mm
90.0 mm
63.4 mm
94.9 mm
63.0 mm
41.3 mm
38.1 mm
1-1/16-12 1-1/16-12
UN-2A
UN-2A
1-5/16-12 1-5/16-12
UN-2A
UN-2A
Male 37° Flare - Female 37° Flare
A
Part Number
Port 2
B
DIA
PS490306-4-4
Hex 2
PS690306-6-6
Hex 1
C
Port 1
PS890306-8-8
D
PS1290306-12-12
D Swivels
PS1690306-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.85”
2.44”
1.47”
2.07”
1.20”
.75”
.56”
7/16-20
7/16-20
72.3 mm
62.0 mm
37.3 mm
52.5 mm
30.5 mm
19.0 mm
14.3 mm
UNF-2A
UNF-2B
3.05”
2.54”
1.57”
2.22”
1.29”
.88”
.69”
9/16-18
9/16-18
77.4 mm
64.4 mm
39.9 mm
56.3 mm
32.8 mm
22.2 mm
17.5 mm
UNF-2A
UNF-2B
3.29”
2.70”
1.91”
2.77”
1.73”
1.12”
.88”
3/4-16
3/4-16
83.7 mm
68.7 mm
48.4 mm
70.4 mm
44.0 mm
28.6 mm
22.2 mm
UNF-2A
UNF-2B
3.76”
3.10”
2.34”
3.43”
2.17”
1.38”
1.25”
95.6 mm
78.8 mm
59.4 mm
87.0 mm
55.2 mm
35.0 mm
31.8 mm
4.41”
3.54”
2.54”
3.79”
2.48”
1.62”
1.50”
112.0 mm
90.0 mm
64.6 mm
96.2 mm
63.0 mm
41.3 mm
38.1 mm
1-1/16-12 1-1/16-12
UN-2A
UN-2B
1-5/16-12 1-5/16-12
UN-2A
UN-2B
Male 37° Flare - Female NPSM Pipe Swivel
Part Number
A
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.85”
2.44”
1.48”
2.08”
1.20”
.75”
.69”
7/16-20
1/4-18
72.3 mm
62.0 mm
37.5 mm
52.8 mm
30.5 mm
19.0 mm
17.4 mm
UNF-2A
NPSM
3.05”
2.54”
1.51”
2.16”
1.29”
.88”
.88”
9/16-18
3/8-18
77.4 mm
64.4 mm
38.4 mm
54.8 mm
32.8 mm
22.2 mm
22.2 mm
UNF-2A
NPSM
3.29”
2.70”
1.86”
2.72”
1.73”
1.12”
1.00”
3/4-16
1/2-14
83.7 mm
68.7 mm
47.2 mm
69.2 mm
44.0 mm
28.6 mm
25.4 mm
UNF-2A
NPSM
3.76”
3.10”
2.24”
3.33”
2.17”
1.38”
1.25”
1-1/16-12
3/4-14
95.6 mm
78.8 mm
56.9 mm
84.5 mm
55.2 mm
35.0 mm
31.8 mm
UN-2A
NPSM
4.41”
3.54”
2.48”
3.73”
2.48”
1.62”
1.50”
112.0 mm
90.0 mm
63.1 mm
94.6 mm
63.0 mm
41.3 mm
38.1 mm
Port 2
DIA
B
Hex 2
PS490307-4-4
PS690307-6-6
Hex 1
C
Port 1
PS890307-8-8
D
PS1290307-12-12
PS1690307-16-16
1-5/16-12 1-11 1/2
UN-2A
NPSM
Male 37° Flare - Female SAE Straight Thread
Part Number
A
B
Hex 1
Port 2
PS490310-4-4
PS690310-6-6
Port 1
DIA
PS890310-8-8
PS1290310-12-12
PS1690310-16-16
A
B
Dia.
Hex 1
Port 1
Port 2
2.85”
2.44”
1.20”
.75”
7/16-20
7/16-20
72.3 mm
62.0 mm
30.5 mm
19.0 mm
UNF-2A
UNF-2B
3.05”
2.54”
1.29”
.88”
9/16-18
9/16-18
77.4 mm
64.4 mm
32.8 mm
22.2 mm
UNF-2A
UNF-2B
3.29”
2.70”
1.73”
1.12”
3/4-16
3/4-16
83.7 mm
68.7 mm
44.0 mm
28.6 mm
UNF-2A
UNF-2B
3.76”
3.10”
2.17”
1.38”
1-1/16-12
1-1/16-12
95.6 mm
78.8 mm
55.2 mm
35.0 mm
UN-2A
UN-2B
4.41”
3.54”
2.48”
1.62”
1-1/16-12
1-1/16-12
112.0 mm
90.0 mm
63.0 mm
41.3 mm
UN-2A
UN-2B
D-20
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
90°
Swivels
PS Series
Male 37° Flare - O-Ring Face Seal
A
Port 2
DIA
B
Hex 1
Part Number
PS4903JM-4-4
Hex 2
PS6903JM-6-6
C
Port 1
D
PS8903JM-8-8
PS8903JM-10-10
PS12903JM-12-12
PS16903JM-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.85”
2.44”
1.29”
1.89”
1.20”
.75”
.56”
7/16-20
9/16-18
72.3 mm
62.0 mm
32.5 mm
47.9 mm
30.5 mm
19.0 mm
14.3 mm
UNF-2A
UNF-2A
3.05”
2.54”
1.40”
2.05”
1.29”
.88”
.69”
9/16-18
11/16-16
77.4 mm
64.4 mm
35.6 mm
52.0 mm
32.8 mm
22.2 mm
17.5 mm
UNF-2A
UN-2A
3.29”
2.70”
1.74”
2.60”
1.73”
1.12”
.88”
3/4-16
13/16-16
83.7 mm
68.7 mm
44.1 mm
66.1 mm
44.0 mm
28.6 mm
22.2 mm
UNF-2A
UN-2A
3.39”
2.80”
1.96”
2.83”
1.73”
1.12”
.88”
7/8-14
1-14
86.2 mm
71.2 mm
49.9 mm
71.9 mm
44.0 mm
28.6 mm
22.2 mm
UNF-2A
UN-2A
3.76”
3.10”
2.18”
3.27”
2.17”
1.38”
1.25”
95.6 mm
78.8 mm
55.4 mm
83.0 mm
55.2 mm
35.0 mm
31.8 mm
4.41”
3.54”
2.34”
3.59”
2.48”
1.62”
1.50”
112.0 mm
90.0 mm
59.6 mm
91.1 mm
63.0 mm
41.3 mm
38.1 mm
1-1/16-12 1-3/16-12
UN-2A
UN-2A
1-5/16-12 1-7/16-12
UN-2A
UN-2A
Part Number
A
Port 2
B
Hex 1
PS490502-4-4
Port 1
PS690502-6-6
DIA
PS890502-8-8
PS1290502-12-12
PS1690502-16-16
A
B
Dia.
Hex 1
Port 1
Port 2
2.70”
2.29”
1.20”
.75”
7/16-20
1/4-18
68.6 mm
58.3 mm
30.5 mm
19.0 mm
UNF-2A
NPTF
2.87”
2.36”
1.29”
.88”
9/16-18
3/8-18
72.8 mm
59.8 mm
32.8 mm
22.2 mm
UNF-2A
NPTF
3.19”
2.60”
1.49”
1.12”
3/4-16
1/2-14
80.9 mm
65.9 mm
37.8 mm
28.6 mm
UNF-2A
NPTF
3.58”
2.92”
1.76”
1.38”
1-1/16-12
3/4-14
90.9 mm
74.0 mm
44.6 mm
35.0 mm
UN-2A
NPTF
4.18”
3.32”
2.16”
1.62”
1-5/16-12
1-11 1/2
106.3 mm
84.3 mm
54.9 mm
41.3 mm
UN-2A
NPTF
D Swivels
Male SAE O-Ring Straight Thread - Female Pipe
Male SAE O-Ring Straight Thread - Male 37° Flare
Part Number
A
DIA
B
PS490503-4-4
Port 2
PS690503-6-6
Hex 1
Hex 2
C
Port 1
PS890503-8-8
D
PS890503-10-10
PS1290503-12-12
PS1690503-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.70”
2.29”
1.39”
1.99”
1.20”
.75”
.56”
7/16-20
7/16-20
68.6 mm
58.3 mm
35.2 mm
50.5 mm
30.5 mm
19.0 mm
14.3 mm
UNF-2A
UNF-2A
2.87”
2.36”
1.44”
2.09”
1.29”
.88”
.69”
9/16-18
9/16-18
72.8 mm
59.8 mm
36.6 mm
53.0 mm
32.8 mm
22.2 mm
17.5 mm
UNF-2A
UNF-2A
3.19”
2.60”
1.78”
2.64”
1.73”
1.12”
.88”
3/4-16
3/4-16
80.9 mm
65.9 mm
45.1 mm
67.1 mm
44.0 mm
28.6 mm
22.2 mm
UNF-2A
UNF-2A
3.25”
2.66”
1.90”
2.77”
1.73”
1.12”
.88”
7/8-14
7/8-14
82.5 mm
67.5 mm
48.4 mm
70.4 mm
44.0 mm
28.6 mm
22.2 mm
UNF-2A
UNF-2A
3.58”
2.92”
2.24”
3.86”
2.17”
1.38”
1.25”
90.9 mm
74.0 mm
56.9 mm
85.3 mm
55.2 mm
35.0 mm
31.8 mm
4.18”
3.32”
2.42”
3.66”
2.48”
1.62”
1.50”
106.3 mm
84.3 mm
61.3 mm
92.9 mm
63.0 mm
41.3 mm
38.1 mm
1-1/16-12 1-1/16-12
UN-2A
UN-2A
1-5/16-12 1-5/16-12
UN-2A
UN-2A
Male SAE O-Ring Straight Thread - Male SAE O-Ring Straight Thread
Part Number
A
B
Hex 1
Port 2
PS490505-4-4
PS690505-6-6
Hex 2
C
Port 1
DIA
D
PS890505-8-8
PS1290505-12-12
PS1690505-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.70”
2.29”
1.38”
1.98”
1.20”
.75”
.56”
7/16-20
7/16-20
68.6 mm
58.3 mm
35.0 mm
50.2 mm
30.5 mm
19.0 mm
14.3 mm
UNF-2A
UNF-2A
2.87”
2.36”
1.55”
2.20”
1.29”
.88”
.69”
9/16-18
9/16-18
72.8 mm
59.8 mm
39.4 mm
55.8 mm
32.8 mm
22.2 mm
17.5 mm
UNF-2A
UNF-2A
3.19”
2.60”
1.86”
2.72”
1.73”
1.12”
.88”
3/4-16
3/4-16
80.9 mm
65.9 mm
47.2 mm
69.2 mm
44.0 mm
28.6 mm
22.2 mm
UNF-2A
UNF-2A
3.58”
2.92”
2.40”
3.49”
2.17”
1.38”
1.25”
90.9 mm
74.0 mm
61.0 mm
88.5 mm
55.2 mm
35.0 mm
31.8 mm
4.18”
3.32”
2.50”
3.74”
2.48”
1.62”
1.50”
106.3 mm
84.3 mm
63.4 mm
94.9 mm
63.0 mm
41.3 mm
38.1 mm
D-21
1-1/16-12 1-1/16-12
UN-2A
UN-2A
1-5/16-12 1-5/16-12
UN-2A
UN-2A
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
90°
Swivels
PS Series
Male SAE O-Ring Straight Thread - Female 37° Flare
Part Number
A
B
DIA
Port 2
Hex 2
PS490506-4-4
PS690506-6-6
Hex 1
C
Port 1
PS890506-8-8
D
PS1290506-12-12
PS1690506-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.70”
2.29”
1.47”
2.07”
1.20”
.75”
.56”
7/16-20
7/16-20
68.6 mm
58.3 mm
37.3 mm
52.5 mm
30.5 mm
19.0 mm
14.3 mm
UNF-2A
UNF-2B
2.87”
2.36”
1.57”
2.22”
1.29”
.88”
.69”
9/16-18
9/16-18
72.8 mm
59.8 mm
39.9 mm
56.3 mm
32.8 mm
22.2 mm
17.5 mm
UNF-2A
UNF-2B
3.19”
2.60”
1.91”
2.77”
1.73”
1.12”
.88”
3/4-16
3/4-16
80.9 mm
65.9 mm
48.4 mm
70.4 mm
44.0 mm
28.6 mm
22.2 mm
UNF-2A
UNF-2B
3.58”
2.92”
2.34”
3.43”
2.17”
1.38”
1.25”
90.9 mm
74.0 mm
59.4 mm
87.0 mm
55.2 mm
35.0 mm
31.8 mm
4.18”
3.32”
2.54”
3.79”
2.48”
1.62”
1.50”
106.3 mm
84.3 mm
64.6 mm
96.2 mm
63.0 mm
41.3 mm
38.1 mm
1-1/16-12 1-1/16-12
UN-2A
UN-2B
1-5/16-12 1-5/16-12
UN-2A
UN-2B
Male SAE O-Ring Straight Thread - Female NPSM Pipe Swivel
A
Part Number
B
DIA
Port 2
PS490507-4-4
Hex 2
PS690507-6-6
Hex 1
C
Port 1
D
PS890507-8-8
D Swivels
PS1290507-12-12
PS1690507-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.70”
2.29”
1.48”
2.08”
1.20”
.75”
.69”
7/16-20
1/4-18
68.6 mm
58.3 mm
37.5 mm
52.8 mm
30.5 mm
19.0 mm
17.4 mm
UNF-2A
NPSM
2.87”
2.36”
1.51”
2.16”
1.29”
.88”
.88”
9/16-18
3/8-18
72.8 mm
59.8 mm
38.4 mm
54.8 mm
32.8 mm
22.2 mm
22.2 mm
UNF-2A
NPSM
3.19”
2.60”
1.86”
2.72”
1.73”
1.12”
1.00”
3/4-16
1/2-14
80.9 mm
65.9 mm
47.2 mm
69.2 mm
44.0 mm
28.6 mm
25.4 mm
UNF-2A
NPSM
3.58”
2.92”
2.24”
3.33”
2.17”
1.38”
1.25”
1-1/16-12
3/4-14
90.9 mm
74.0 mm
56.9 mm
84.5 mm
55.2 mm
35.0 mm
31.8 mm
UN-2A
NPSM
4.18”
3.32”
2.48”
3.73”
2.48”
1.62”
1.50”
106.3 mm
84.3 mm
63.1 mm
94.6 mm
63.0 mm
41.3 mm
38.1 mm
1-5/16-12 1-11 1/2
UN-2A
NPSM
Male SAE O-Ring Straight Thread - Female SAE Straight Thread
Part Number
A
PS490510-4-4
B
Port 2
Hex 1
PS690510-6-6
Port 1
PS890510-8-8
DIA
PS1290510-12-12
PS1690510-16-16
A
B
Dia.
Hex 1
Port 1
Port 2
2.70”
2.29”
1.20”
.75”
7/16-20
7/16-20
68.6 mm
58.3 mm
30.5 mm
19.0 mm
UNF-2A
UNF-2B
2.87”
2.36”
1.29”
.88”
9/16-18
9/16-18
72.8 mm
59.8 mm
32.8 mm
22.2 mm
UNF-2A
UNF-2B
3.19”
2.60”
1.73”
1.12”
3/4-16
3/4-16
80.9 mm
65.9 mm
44.0 mm
28.6 mm
UNF-2A
UNF-2B
3.58”
2.92”
2.17”
1.38”
1-1/16-12
1-1/16-12
90.9 mm
74.0 mm
55.2 mm
35.0 mm
UN-2A
UN-2B
4.18”
3.32”
2.48”
1.62”
1-5/16-12
1-5/16-12
106.3 mm
84.3 mm
63.0 mm
41.3 mm
UN-2A
UN-2B
Male SAE O-Ring Straight Thread - O-Ring Face Seal
A
Part Number
Port 2
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.70”
2.29”
1.29”
1.89”
1.20”
.75”
.56”
7/16-20
9/16-18
68.6 mm
58.3 mm
32.5 mm
47.9 mm
30.5 mm
19.0 mm
14.3 mm
UNF-2A
UNF-2A
2.87”
2.36”
1.40”
2.05”
1.29”
.88”
.69”
9/16-18
11/16-16
72.8 mm
59.8 mm
35.6 mm
52.0 mm
32.8 mm
22.2 mm
17.5 mm
UNF-2A
UN-2A
3.19”
2.60”
1.74”
2.60”
1.73”
1.12”
.88”
3/4-16
13/16-16
80.9 mm
65.9 mm
44.1 mm
66.1 mm
44.0 mm
28.6 mm
22.2 mm
UNF-2A
UN-2A
3.25”
2.66”
1.96”
2.83”
1.73”
1.12”
.88”
7/8-14
1-14
82.5 mm
67.5 mm
49.9 mm
71.9 mm
44.0 mm
28.6 mm
22.2 mm
UNF-2A
UN-2A
DIA
PS4905JM-4-4
B
Hex 1
Port 1
Hex 2
PS6905JM-6-6
C
D
PS8905JM-8-8
PS8905JM-10-10
PS12905JM-12-12
PS16905JM-16-16
3.58”
2.92”
2.18”
3.27”
2.17”
1.38”
1.25”
90.9 mm
74.0 mm
55.4 mm
83.0 mm
55.2 mm
35.0 mm
31.8 mm
4.18”
3.32”
2.34”
3.59”
2.48”
1.62”
1.50”
106.3 mm
84.3 mm
59.6 mm
91.1 mm
63.0 mm
41.3 mm
38.1 mm
D-22
1-1/16-12 1-3/16-12
UN-2A
UN-2A
1-5/16-12 1-7/16-12
UN-2A
UN-2A
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
90°
Swivels
PS Series
Female SAE Straight Thread - Female Pipe
A
Part Number
B
PS491002-4-4
Hex 1
Port 2
PS691002-6-6
Port 1
PS891002-8-8
DIA
PS1291002-12-12
PS1691002-16-16
A
B
Dia.
Hex 1
Port 1
Port 2
2.42”
2.01”
1.20”
.75”
7/16-20
1/4-18
61.4 mm
51.2 mm
30.5 mm
19.0 mm
UNF-2B
NPTF
2.68”
2.17”
1.29”
.88”
9/16-18
3/8-18
68.2 mm
55.2 mm
32.8 mm
22.2 mm
UNF-2B
NPTF
2.96”
2.37”
1.49”
1.12”
3/4-16
1/2-14
75.3 mm
60.3 mm
37.8 mm
28.6 mm
UNF-2B
NPTF
3.43”
2.77”
1.76”
1.38”
1-1/16-12
3/4-14
87.2 mm
70.4 mm
44.6 mm
35.0 mm
UN-2B
NPTF
4.03”
3.16”
2.16”
1.62”
1-5/16-12
1-11 1/2
102.3 mm
80.3 mm
54.9 mm
41.3 mm
UN-2B
NPTF
Female SAE Straight Thread - Male 37° Flare
Part Number
Port 2
DIA
Hex 2
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.42”
2.01”
1.39”
1.99”
1.20”
.75”
.56”
7/16-20
7/16-20
61.4 mm
51.2 mm
35.2 mm
50.5 mm
30.5 mm
19.0 mm
14.3 mm
UNF-2B
UNF-2A
2.68”
2.17”
1.44”
2.09”
1.29”
.88”
.69”
9/16-18
9/16-18
68.2 mm
55.2 mm
36.6 mm
53.0 mm
32.8 mm
22.2 mm
17.5 mm
UNF-2B
UNF-2A
2.96”
2.37”
1.78”
2.64”
1.73”
1.12”
.88”
3/4-16
3/4-16
75.3 mm
60.3 mm
45.1 mm
67.1 mm
44.0 mm
28.6 mm
22.2 mm
UNF-2B
UNF-2A
3.43”
2.77”
2.24”
3.86”
2.17”
1.38”
1.25”
87.2 mm
70.4 mm
56.9 mm
85.3 mm
55.2 mm
35.0 mm
31.8 mm
4.03”
3.16”
2.42”
3.66”
2.48”
1.62”
1.50”
102.3 mm
80.3 mm
61.3 mm
92.9 mm
63.0 mm
41.3 mm
38.1 mm
PS491003-4-4
PS691003-6-6
Hex 1
C
PS891003-8-8
D
Port 1
PS1291003-12-12
PS1691003-16-16
1-1/16-12 1-1/16-12
UN-2B
UN-2A
1-5/16-12 1-5/16-12
UN-2B
UN-2A
Female SAE Straight Thread - Male SAE O-Ring Straight Thread
Part Number
A
B
Hex 1
Port 2
DIA
Hex 2
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.42”
2.01”
1.38”
1.98”
1.20”
.75”
.56”
7/16-20
7/16-20
61.4 mm
51.2 mm
35.0 mm
50.2 mm
30.5 mm
19.0 mm
14.3 mm
UNF-2B
UNF-2A
2.68”
2.17”
1.55”
2.20”
1.29”
.88”
.69”
9/16-18
9/16-18
68.2 mm
55.2 mm
39.4 mm
55.8 mm
32.8 mm
22.2 mm
17.5 mm
UNF-2B
UNF-2A
2.96”
2.37”
1.86”
2.72”
1.73”
1.12”
.88”
3/4-16
3/4-16
75.3 mm
60.3 mm
47.2 mm
69.2 mm
44.0 mm
28.6 mm
22.2 mm
UNF-2B
UNF-2A
3.43”
2.77”
2.40”
3.49”
2.17”
1.38”
1.25”
87.2 mm
70.4 mm
61.0 mm
88.5 mm
55.2 mm
35.0 mm
31.8 mm
4.03”
3.16”
2.50”
3.74”
2.48”
1.62”
1.50”
102.3 mm
80.3 mm
63.4 mm
94.9 mm
63.0 mm
41.3 mm
38.1 mm
PS491005-4-4
PS691005-6-6
C
PS891005-8-8
D
Port 1
PS1291005-12-12
PS1691005-16-16
1-1/16-12 1-1/16-12
UN-2B
UN-2A
1-5/16-12 1-5/16-12
UN-2B
UN-2A
Female SAE Straight Thread - Female 37° Flare
Part Number
A
Port 2
B
DIA
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.42”
2.01”
1.47”
2.07”
1.20”
.75”
.56”
7/16-20
7/16-20
61.4 mm
51.2 mm
37.3 mm
52.5 mm
30.5 mm
19.0 mm
14.3 mm
UNF-2B
UNF-2B
2.68”
2.17”
1.57”
2.22”
1.29”
.88”
.69”
9/16-18
9/16-18
68.2 mm
55.2 mm
39.9 mm
56.3 mm
32.8 mm
22.2 mm
17.5 mm
UNF-2B
UNF-2B
2.96”
2.37”
1.91”
2.77”
1.73”
1.12”
.88”
3/4-16
3/4-16
75.3 mm
60.3 mm
48.4 mm
70.4 mm
44.0 mm
28.6 mm
22.2 mm
UNF-2B
UNF-2B
3.43”
2.77”
2.34”
3.43”
2.17”
1.38”
1.25”
87.2 mm
70.4 mm
59.4 mm
87.0 mm
55.2 mm
35.0 mm
31.8 mm
4.03”
3.16”
2.54”
3.79”
2.48”
1.62”
1.50”
102.3 mm
80.3 mm
64.6 mm
96.2 mm
63.0 mm
41.3 mm
38.1 mm
PS491006-4-4
Hex 2
PS691006-6-6
Hex 1
C
PS891006-8-8
D
Port 1
PS1291006-12-12
PS1691006-16-16
1-1/16-12 1-1/16-12
UN-2B
UN-2B
1-5/16-12 1-5/16-12
UN-2B
UN-2B
Female SAE Straight Thread - Female NPSM Pipe Swivel
Part Number
A
B
Hex 1
Port 1
Port 2
DIA
PS491007-4-4
PS691007-6-6
Hex 2
C
D
PS891007-8-8
PS1291007-12-12
PS1691007-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.42”
2.01”
1.48”
2.08”
1.20”
.75”
.69”
7/16-20
1/4-18
61.4 mm
51.2 mm
37.5 mm
52.8 mm
30.5 mm
19.0 mm
17.4 mm
UNF-2B
NPSM
2.68”
2.17”
1.51”
2.16”
1.29”
.88”
.88”
9/16-18
3/8-18
68.2 mm
55.2 mm
38.4 mm
54.8 mm
32.8 mm
22.2 mm
22.2 mm
UNF-2B
NPSM
2.96”
2.37”
1.86”
2.72”
1.73”
1.12”
1.00”
3/4-16
1/2-14
75.3 mm
60.3 mm
47.2 mm
69.2 mm
44.0 mm
28.6 mm
25.4 mm
UNF-2B
NPSM
3.43”
2.77”
2.24”
3.33”
2.17”
1.38”
1.25”
1-1/16-12
3/4-14
87.2 mm
70.4 mm
56.9 mm
84.5 mm
55.2 mm
35.0 mm
31.8 mm
UN-2B
NPSM
4.03”
3.16”
2.48”
3.73”
2.48”
1.62”
1.50”
102.3 mm
80.3 mm
63.1 mm
94.6 mm
63.0 mm
41.3 mm
38.1 mm
D-23
1-5/16-12 1-11 1/2
UN-2B
NPSM
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
D Swivels
A
B
90°
Swivels
PS Series
Female SAE Straight Thread - Female SAE Straight Thread
A
Part Number
B
Hex 1
Port 2
PS491010-4-4
PS691010-6-6
Port 1
DIA
PS891010-8-8
PS1291010-12-12
PS1691010-16-16
3 Piece Design
A
B
Part Number
D
Port 2
C
PS2491010-20-20
Port 1
PS2491010-24-24
Dia
PS3291010-32-32
A
B
Dia.
Hex 1
Port 1
Port 2
2.42”
2.01”
1.20”
.75”
7/16-20
7/16-20
61.4 mm
51.2 mm
30.5 mm
19.0 mm
UNF-2B
UNF-2B
2.68”
2.17”
1.29”
.88”
9/16-18
9/16-18
68.2 mm
55.2 mm
32.8 mm
22.2 mm
UNF-2B
UNF-2B
2.96”
2.37”
1.73”
1.12”
3/4-16
3/4-16
75.3 mm
60.3 mm
44.0 mm
28.6 mm
UNF-2B
UNF-2B
3.43”
2.77”
2.17”
1.38”
1-1/16-12
1-1/16-12
87.2 mm
70.4 mm
55.2 mm
35.0 mm
UN/-2B
UN-2B
4.03”
3.16”
2.48”
1.62”
1-5/16-12
1-5/16-12
102.3 mm
80.3 mm
63.0 mm
41.3 mm
UN/-2B
UN-2B
A
B
C
D
Wrench Flats
Dia.
Port 1
Port 2
5.91"
4.63"
3.43"
1.27"
2.63"
3.36"
1 5/8-12
1 5/8-12
150.2 mm
117.5 mm
87.0 mm
32.3 mm
66.7 mm
85.2 mm
UN-2B
UN-2B
5.91"
4.63"
3.43"
1.27"
2.63"
3.36"
1 7/8-12
1 7/8-12
150.2 mm
117.5 mm
87.0 mm
32.3 mm
66.7 mm
6.83"
179.8 mm
5.45"
138.4 mm
3.93"
99.7 mm
1.52"
38.5 mm
3.06"
77.6 mm
85.2 mm
UN-2B
UN-2B
4.19"
2 11-1/2
2-1/2-12
106.4 mm
UN-2B
UN-2B
D Swivels
Wrench Flats
Female SAE Straight Thread - O-Ring Face Seal
Part Number
A
Port 2
B
DIA
Hex 2
PS4910JM-4-4
PS6910JM-6-6
Hex 1
C
PS8910JM-8-8
D
Port 1
PS12910JM-12-12
PS16910JM-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.42”
2.01”
1.29”
1.89”
1.20”
.75”
.56”
7/16-20
9/16-18
61.4 mm
51.2 mm
32.5 mm
47.9 mm
30.5 mm
19.0 mm
14.3 mm
UNF-2B
UNF-2A
2.68”
2.17”
1.40”
2.05”
1.29”
.88”
.69”
9/16-18
11/16-16
68.2 mm
55.2 mm
35.6 mm
52.0 mm
32.8 mm
22.2 mm
17.5 mm
UNF-2B
UNF-2A
2.96”
2.37”
1.74”
2.60”
1.73”
1.12”
.88”
3/4-16
13/16-16
75.3 mm
60.3 mm
44.1 mm
66.1 mm
44.0 mm
28.6 mm
22.2 mm
UNF-2B
UN-2A
3.43”
2.77”
2.18”
3.27”
2.17”
1.38”
1.25”
87.2 mm
70.4 mm
55.4 mm
83.0 mm
55.2 mm
35.0 mm
31.8 mm
4.03”
3.16”
2.34”
3.59”
2.48”
1.62”
1.50”
102.3 mm
80.3 mm
59.6 mm
91.1 mm
63.0 mm
41.3 mm
38.1 mm
1-1/16-12 1-3/16-12
UN-2B
UN-2A
1-5/16-12 1-7/16-12
UN-2B
UN-2A
O-Ring Face Seal - Female Pipe
Part Number
A
PS49JM02-4-4
B
Hex 1
Port 2
PS69JM02-6-6
Port 1
PS89JM02-8-8
DIA
PS129JM02-12-12
PS169JM02-16-16
A
B
Dia.
Hex 1
Port 1
Port 2
2.70”
2.29”
1.20”
.75”
9/16-18
1/4-18
68.6 mm
58.3 mm
30.5 mm
19.0 mm
UNF-2A
NPTF
2.87”
2.36”
1.29”
.88”
11/16-16
3/8-18
72.8 mm
59.8 mm
32.8 mm
22.2 mm
UN-2A
NPTF
3.19”
2.60”
1.49”
1.12”
13/16-16
1/2-14
80.9 mm
65.9 mm
37.8 mm
28.6 mm
UN-2A
NPTF
3.58”
2.92”
1.76”
1.38”
1-3/16-12
3/4-14
90.9 mm
74.0 mm
44.6 mm
35.0 mm
UN-2A
NPTF
4.18”
3.32”
2.16”
1.62”
1-7/16-12
1-11 1/2
106.3 mm
84.3 mm
54.9 mm
41.3 mm
UN-2A
NPTF
O-Ring Face Seal - Male 37° Flare
Part Number
A
B
Hex 1
Port 1
Port 2
Hex 2
DIA
PS49JM03-4-4
PS69JM03-6-6
C
D
PS89JM03-8-8
PS89JM03-10-10
PS129JM03-12-12
PS169JM03-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.70”
2.29”
1.39”
1.99”
1.20”
.75”
.56”
9/16-18
7/16-20
68.6 mm
58.3 mm
35.2 mm
50.5 mm
30.5 mm
19.0 mm
14.3 mm
UNF-2A
UNF-2A
2.87”
2.36”
1.44”
2.09”
1.29”
.88”
.69”
11/16-16
9/16-18
72.8 mm
59.8 mm
36.6 mm
53.0 mm
32.8 mm
22.2 mm
17.5 mm
UN-2A
UNF-2A
3.19”
2.60”
1.78”
2.64”
1.73”
1.12”
.88”
13/16-16
3/4-16
80.9 mm
65.9 mm
45.1 mm
67.1 mm
44.0 mm
28.6 mm
22.2 mm
UN-2A
UNF-2A
3.29”
2.70”
1.90”
2.77”
1.73”
1.12”
.88”
7/8-14
7/8-14
83.5 mm
68.5 mm
48.4 mm
70.4 mm
44.0 mm
28.6 mm
22.2 mm
UN-2A
UNF-2A
3.58”
2.92”
2.24”
3.86”
2.17”
1.38”
1.25”
90.9 mm
74.0 mm
56.9 mm
85.3 mm
55.2 mm
35.0 mm
31.8 mm
4.18”
3.32”
2.42”
3.66”
2.48”
1.62”
1.50”
106.3 mm
84.3 mm
61.3 mm
92.9 mm
63.0 mm
41.3 mm
38.1 mm
D-24
1-3/16-12 1-1/16-12
UN-2A
UN-2A
1-7/16-12 1-5/16-12
UN-2A
UN-2A
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
90°
Swivels
PS Series
O-Ring Face Seal - Male SAE O-Ring Straight Thread
Part Number
A
B
DIA
Port 2
PS49JM05-4-4
Hex 2
PS69JM05-6-6
Hex 1
C
Port 1
PS89JM05-8-8
D
PS129JM05-12-12
PS169JM05-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.70”
2.29”
1.38”
1.98”
1.20”
.75”
.56”
9/16-18
7/16-20
68.6 mm
58.3 mm
35.0 mm
50.2 mm
30.5 mm
19.0 mm
14.3 mm
UNF-2A
UNF-2A
2.87”
2.36”
1.55”
2.20”
1.29”
.88”
.69”
11/16-16
9/16-18
72.8 mm
59.8 mm
39.4 mm
55.8 mm
32.8 mm
22.2 mm
17.5 mm
UN-2A
UNF-2A
3.19”
2.60”
1.86”
2.72”
1.73”
1.12”
.88”
13/16-16
3/4-16
80.9 mm
65.9 mm
47.2 mm
69.2 mm
44.0 mm
28.6 mm
22.2 mm
UN-2A
UNF-2A
3.58”
2.92”
2.40”
3.49”
2.17”
1.38”
1.25”
1-3/16-12
3/4-12
90.9 mm
74.0 mm
61.0 mm
88.5 mm
55.2 mm
35.0 mm
31.8 mm
UN-2A
UN-2A
4.18”
3.32”
2.50”
3.74”
2.48”
1.62”
1.50”
106.3 mm
84.3 mm
63.4 mm
94.9 mm
63.0 mm
41.3 mm
38.1 mm
1-7/16-12 1-5/16-12
UN-2A
UN-2A
O-Ring Face Seal - Female 37° Flare
Part Number
A
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.70”
2.29”
1.47”
2.07”
1.20”
.75”
.56”
9/16-18
7/16-20
68.6 mm
58.3 mm
37.3 mm
52.5 mm
30.5 mm
19.0 mm
14.3 mm
UNF-2A
UNF-2B
2.87”
2.36”
1.57”
2.22”
1.29”
.88”
.69”
11/16-16
9/16-18
72.8 mm
59.8 mm
39.9 mm
56.3 mm
32.8 mm
22.2 mm
17.5 mm
UN-2A
UNF-2B
3.19”
2.60”
1.91”
2.77”
1.73”
1.12”
.88”
13/16-16
3/4-16
80.9 mm
65.9 mm
48.4 mm
70.4 mm
44.0 mm
28.6 mm
22.2 mm
UN-2A
UNF-2B
3.58”
2.92”
2.34”
3.43”
2.17”
1.38”
1.25”
90.9 mm
74.0 mm
59.4 mm
87.0 mm
55.2 mm
35.0 mm
31.8 mm
4.18”
3.32”
2.54”
3.79”
2.48”
1.62”
1.50”
106.3 mm
84.3 mm
64.6 mm
96.2 mm
63.0 mm
41.3 mm
38.1 mm
Port 2
PS69JM06-6-6
Hex 1
C
PS89JM06-8-8
D
Port 1
PS129JM06-12-12
PS169JM06-16-16
1-3/16-12 1-1/16-12
UN-2A
UN-2B
1-7/16-12 1-5/16-12
UN-2A
UN-2B
O-Ring Face Seal - Female NPSM Pipe Swivel
Part Number
A
Port 2
DIA
B
Hex 2
PS49JM07-4-4
PS69JM07-6-6
Hex 1
PS89JM07-8-8
C
Port 1
D
PS129JM07-12-12
PS169JM07-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.70”
2.29”
1.48”
2.08”
1.20”
.75”
.69”
9/16-18
1/4-18
68.6 mm
58.3 mm
37.5 mm
52.8 mm
30.5 mm
19.0 mm
17.4 mm
UNF-2A
NPSM
2.87”
2.36”
1.51”
2.16”
1.29”
.88”
.88”
11/16-16
3/8-18
72.8 mm
59.8 mm
38.4 mm
54.8 mm
32.8 mm
22.2 mm
22.2 mm
UN-2A
NPSM
3.19”
2.60”
1.86”
2.72”
1.73”
1.12”
1.00”
13/16-16
1/2-14
80.9 mm
65.9 mm
47.2 mm
69.2 mm
44.0 mm
28.6 mm
25.4 mm
UN-2A
NPSM
3.58”
2.92”
2.24”
3.33”
2.17”
1.38”
1.25”
1-3/16-12
3/4-14
90.9 mm
74.0 mm
56.9 mm
84.5 mm
55.2 mm
35.0 mm
31.8 mm
UN-2A
NPSM
4.18”
3.32”
2.48”
3.73”
2.48”
1.62”
1.50”
106.3 mm
84.3 mm
63.1 mm
94.6 mm”
63.0 mm
41.3 mm
38.1 mm
1-7/16-12 1-11 1/2
UN-2A
NPSM
O-Ring Face Seal - Female SAE Straight Thread
Part Number
A
PS49JM10-4-4
B
Hex 1
Port 2
PS69JM10-6-6
Port 1
PS89JM10-8-8
DIA
PS129JM10-12-12
PS169JM10-16-16
A
B
Dia.
Hex 1
Port 1
Port 2
2.70”
2.29”
1.20”
.75”
9/16-18
7/16-20
68.6 mm
58.3 mm
30.5 mm
19.0 mm
UNF-2A
UNF-2B
2.87”
2.36”
1.29”
.88”
11/16-16
9/16-18
72.8 mm
59.8 mm
32.8 mm
22.2 mm
UN-2A
UNF-2B
3.19”
2.60”
1.73”
1.12”
13/16-16
3/4-16
80.9 mm
65.9 mm
44.0 mm
28.6 mm
UN-2A
UNF-2B
3.58”
2.92”
2.17”
1.38”
1-3/16-12
1-1/16-12
90.9 mm
74.0 mm
55.2 mm
35.0 mm
UN-2A
UN-2B
4.18”
3.32”
2.48”
1.62”
1-7/16-12
1-5/16-12
106.3 mm
84.3 mm
63.0 mm
41.3 mm
UN-2A
UN-2B
O-Ring Face Seal - O-Ring Face Seal
Part Number
A
Port 2
DIA
B
PS49JMJM-4-4
PS69JMJM-6-6
Hex 1
Port 1
Hex 2
C
PS89JMJM-8-8
D
PS89JMJM-10-10
PS129JMJM-12-12
PS169JMJM-16-16
A
B
C
D
Dia.
Hex 1
Hex 2
Port 1
Port 2
2.70”
2.29”
1.29”
1.89”
1.20”
.75”
.56”
9/16-18
9/16-18
68.6 mm
58.3 mm
32.5 mm
47.9 mm
30.5 mm
19.0 mm
14.3 mm
UNF-2A
UNF-2A
2.87”
2.36”
1.40”
2.05”
1.29”
.88”
.69”
72.8 mm
59.8 mm
35.6 mm
52.0 mm
32.8 mm
22.2 mm
17.5 mm
3.19”
2.60”
1.74”
2.60”
1.73”
1.12”
.88”
80.9 mm
65.9 mm
44.1 mm
66.1 mm
44.0 mm
28.6 mm
22.2 mm
UN-2A
3.29”
2.70”
1.96”
2.83”
1.73”
1.12”
.88”
1-14
1-14
83.5 mm
68.5 mm
49.9 mm
71.9 mm
44.0 mm
28.6 mm
22.2 mm
UN-2A
UN-2A
3.58”
2.92”
2.18”
3.27”
2.17”
1.38”
1.25”
90.9 mm
74.0 mm
55.4 mm
83.0 mm
55.2 mm
35.0 mm
31.8 mm
4.18”
3.32”
2.34”
3.59”
2.48”
1.62”
1.50”
106.3 mm
84.3 mm
59.6 mm
91.1 mm
63.0 mm
41.3 mm
38.1 mm
D-25
11/16-16 11/16-16
UN-2A
UN-2A
13/16-16 13/16-16
UN-2A
1-3/16-12 1-3/16-12
UN-2A
UN-2A
1-7/16-12 1-7/16-12
UN-2A
UN-2A
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
D Swivels
DIA
B
Hex 2
PS49JM06-4-4
Repair Kits
Swivels
Repair Kits/Seal Options
Repair Kits come complete with O-Rings, PTFE Back-Up Ring,
Cap Screws, Locking Balls, Retaining Ring and grease fitting.
Repair kits are suitable for both current and previous design 90° PS Series Swivels.
1/4" Swivel
3/8" Swivel
1/2" Swivel
3/4" Swivel
1" Swivel
PS4-RPR
PS6-RPR
PS8-RPR
PS12-RPR
PS16-RPR
PS4Y-RPR
PS6Y-RPR
PS8Y-RPR
PS12Y-RPR
PS16Y-RPR
PS4A-RPR
PS6A-RPR
PS8A-RPR
PS12A-RPR
PS16A-RPR
PS4W-RPR
PS6W-RPR
PS8W-RPR
PS12W-RPR
PS16W-RPR
H2C-PS = Bearing Removal Pneumatic Nipple
Seal Options
Nitrile (standard unless otherwise designated)
A = Aflas™
D Swivels
W = Ethylene Propylene
Y = Fluorocarbon
Z = Neoprene
For Perfluoroelastomer seal option
contact the division.
D-26
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Introduction
Swivels
S Series
S Series Swivels
Specifications
Introduction
The S Series Swivel
product line complements the Quick
Coupling Division’s PS
Series swivel line by
offering a pressure balanced, compact forged
body design. As a result
of the pressure balanced design, the S Series Swivel does
not experience a significant increase in torque as pressure
rises. The housing body is forged to provide superior performance and durability in tough applications. This product is
great for eliminating hose twist, torque and stress caused by
the movement of the hydraulic components where side load
to the swivel can be minimized.
Body size
1/4" 3/8" 1/2" 3/4" 1”
Maximum Rated Pressure (PSI) 3000 3000 3000 3000 3000*
Temperature Range (standard seals)
-40° to 250° F
* 07 ports on 1” S Series maximum rated pressure is 2600 psi.
Performance Data
S Series Swivel (1/4", 3/8", 1/2", 3/4")
Test Fluid: Oil - 150 SUS vs. Pressure Drop
40
35
3/8"
Features
3/4"
1/2"
D Swivels
30
• Variety of seal options.
• Torque value does not significantly increase with pressure.
• Dust seals protect the swivel from damaging environmental
contaminents.
• Field service kits are available for quick and reliable repairs.
• 360° swivel eliminates long radius bends, hose twist and
stress that can cause premature hose failure.
Pressure Drop in PSID
• 3000 psi working pressure rating for all sizes.
• One piece forged housing eliminates a brazed 90°
adapter connection.
25
20
15
1/4"
10
• Case hardened for enhanced service life.
• Compact design to fit into tight areas.
5
0
0
5
10
15
20
25
30
35
40
45
Flow in USGPM
D-27
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
How To Order
Swivels
S Series
Port 1
Port 2
O-Ring
Shaft
Back-Up Ring
O-Ring
Flow Holes
Housing
O-Ring
Back-Up Ring
D Swivels
O-Ring
Retainer
Retaining Ring
S Part Number:
S 21 02 V - 8 - 8 NI
Material and Finish:
Blank = Carbon Steel (12L14)
Yellow Chromate Plating
NI =
Carbon Steel (12L14)*
Nickel Plating
Housing Port Size (1/16 of an inch)
Shaft Port Size (1/16 of an inch)
Housing Port Configuration:
01 = Male NPTF
02 = Female NPTF
03 = Male JIC 37 Degree
05 = Male SAE O-Ring Straight Thread
07 = Female NPSM Pipe Swivel
10 = Female SAE Straight Thread
Seal Code:
Blank = Nitrile (Standard)
E = Ethylene Propylene
V = Fluorocarbon
Shaft Port Configuration:
21 = Male NPTF
22 = Female NPTF
23 = Male JIC 37 Degree
25 = Male SAE O-Ring Straight Thread
Parker S Series Swivel designator
* Contact the Division for Price and Availability
D-28
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
90°
Swivels
S Series
Male Pipe - Male Pipe
A
B
Hex 1
Port 1
Part Number
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2101-4-4
2.31"
1.51"
2.19"
1.50"
.88"
.88"
1/4-18 NPTF
1/4-18 NPTF
58.7 mm
38.4 mm
55.5 mm
38.0 mm
22.2 mm
22.2 mm
2.31"
1.51"
2.19"
1.50"
.88"
.88"
3/8-18 NPTF
3/8-18 NPTF
58.7 mm
38.4 mm
55.5 mm
38.0 mm
22.2 mm
22.2 mm
1/2-14 NPTF
1/2-14 NPTF
3/4-14 NPTF
3/4-14 NPTF
S2101-6-6
C
S2101-8-8
D
S2101-12-12
Port 2
2.74"
1.84"
2.59"
1.84"
1.06"
1.00"
69.6 mm
46.8 mm
65.8 mm
46.7 mm
27.0 mm
25.4 mm
3.35"
2.1 2"
3.00"
2.11"
1.38"
1.38"
85.1 mm
53.9 mm
76.2 mm
53.5 mm
34.9 mm
34.9 mm
Hex 2
Male Pipe - Female Pipe
Hex 1
B
Port 1
Part Number
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2102-4-4
2.31"
1.51"
1.78"
1.09"
.88"
.88"
1/4-18 NPTF
1/4-18 NPTF
58.7 mm
38.4 mm
45.1 mm
27.6 mm
22.2 mm
22.2 mm
2.31"
1.51"
1.78"
1.09"
.88"
.88"
3/8-18 NPTF
3/8-18 NPTF
58.7 mm
38.4 mm
45.1 mm
27.6 mm
22.2 mm
22.2 mm
1/2-14 NPTF
1/2-14 NPTF
3/4-14 NPTF
3/4-14 NPTF
S2102-6-6
C
S2102-8-8
D
S2102-12-12
Port 2
Hex 2
2.74"
1.84"
2.10"
1.35"
1.06"
1.00"
69.6 mm
46.8 mm
53.3 mm
34.3 mm
27.0 mm
25.4 mm
3.35"
2.12"
2.39"
1.50"
1.38"
1.38"
85.1 mm
53.9 mm
60.7 mm
38.0 mm
34.9 mm
34.9 mm
Male Pipe - Male 37° Flare
A
Hex 1
B
Port 1
Part Number
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2103-4-4
2.31"
1.51"
2.19"
1.50"
.88"
.88"
1/4-18 NPTF
7/16-20UNF-2A
58.7 mm
38.4 mm
55.5 mm
38.0 mm
22.2 mm
22.2 mm
2.31"
1.51"
2.19"
1.50"
.88"
.88"
3/8-18 NPTF
9/16-18UNF-2A
58.7 mm
38.4 mm
55.5 mm
38.0 mm
22.2 mm
22.2 mm
1/2-14 NPTF
3/4-16UNF-2A
3/4-14 NPTF
1-1/16-12UN-2A
1-11 1/2 NPTF
1-5/16-12UN-2A
S2103-6-6
C
S2103-8-8
D
S2103-12-12
S2103-16-16
Hex 2
Port 2
2.74"
1.84"
2.59"
1.84"
1.06"
1.00"
69.6 mm
46.8 mm
65.8 mm
46.7 mm
27.0 mm
25.4 mm
3.35"
2.12"
3.07"
2.17"
1.38"
1.38"
85.1 mm
53.9 mm
77.9 mm
55.2 mm
34.9 mm
34.9 mm
3.95"
2.54"
3.01"
2.11"
1.63"
1.69"
100.33 mm
64.5 mm
76.5 mm
53.6 mm
41.4 mm
42.9 mm
Male Pipe - Female NPSM Pipe Swivel
A
Hex 1
B
Port 1
Part Number
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2107-4-4
2.31"
1.51"
2.05"
1.36"
.88"
.69"
1/4-18 NPTF
1/4-18 NPSM
58.7 mm
38.4 mm
52.0 mm
34.5 mm
22.2 mm
17.5 mm
2.31"
1.51"
2.07"
1.38"
.88"
.88"
3/8-18 NPTF
3/8-18 NPSM
58.7 mm
38.4 mm
52.5 mm
35.1 mm
22.2 mm
22.2 mm
1/2-14 NPTF
1/2-14 NPSM
3/4-14 NPTF
3/4-14 NPSM
1-11 1/2 NPTF
1-11 1/2 NPSM
S2107-6-6
C
S2107-8-8
D
S2107-12-12
Port 2
Hex 2
S2107-16-16
2.74"
1.84"
2.32"
1.57"
1.06"
1.00"
69.6 mm
46.8 mm
59.0 mm
39.9 mm
27.0 mm
25.4 mm
3.35"
2.12"
2.74"
1.85"
1.38"
1.25"
85.1 mm
53.9 mm
69.5 mm
46.9 mm
34.9 mm
31.8 mm
3.95"
2.54"
3.14"
2.23"
1.63"
1.69"
100.3 mm
64.5 mm
79.8 mm
56.6 mm
41.4 mm
42.9 mm
Male Pipe - Female SAE Straight Thread
A
B
Hex 1
Port 1
Part Number
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2110-6-6
2.31"
1.51"
1.78"
1.09"
.88"
.88"
3/8-18 NPTF
9/16-18UNF-2B
58.7 mm
38.4 mm
45.1 mm
27.6 mm
22.2 mm
22.2 mm
2.74"
1.84"
2.10"
1.35"
1.06"
1.00"
1/2-14 NPTF
3/4-16UNF-2B
69.6 mm
46.8 mm
53.3 mm
34.3 mm
27.0 mm
25.4 mm
3/4-14 NPTF
1-1/16-12UN-2B
S2110-8-8
C
S2110-12-12
D
Port 2
3.35"
2.12"
2.54"
1.65"
1.38"
1.38"
85.1 mm
53.9 mm
64.5 mm
41.9 mm
34.9 mm
34.9 mm
Hex 2
D-29
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
D Swivels
A
90°
Swivels
S Series
Female Pipe - Male Pipe
A
Hex 1
B
Port 1
Part Number
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2201-4-4
2.19"
1.39"
2.19"
1.50"
.88"
.88"
1/4-18 NPTF
1/4-18 NPTF
55.6 mm
35.4 mm
55.5 mm
38.0 mm
22.2 mm
22.2 mm
2.19"
1.39"
2.19"
1.50"
.88"
.88"
3/8-18 NPTF
3/8-18 NPTF
55.6 mm
35.4 mm
55.5 mm
38.0 mm
22.2 mm
22.2 mm
1/2-14 NPTF
1/2-14 NPTF
3/4-14 NPTF
3/4-14 NPTF
S2201-6-6
C
S2201-8-8
D
S2201-12-12
Port 2
2.47"
1.57"
2.59"
1.84"
1.06"
1.00"
62.7 mm
40.0 mm
65.8 mm
46.7 mm
27.0 mm
25.4 mm
3.15"
1.92"
3.00"
2.11"
1.38"
1.38"
80.0 mm
48.8 mm
76.2 mm
53.5 mm
34.9 mm
34.9 mm
Hex 2
Female Pipe - Female Pipe
A
B
Hex 1
Port 1
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2202-4-4
2.19"
1.39"
1.78"
1.09"
.88"
.88"
1/4-18 NPTF
1/4-18 NPTF
55.6 mm
35.4 mm
45.1 mm
27.6 mm
22.2 mm
22.2 mm
2.19"
1.39"
1.78"
1.09"
.88"
.88"
3/8-18 NPTF
3/8-18 NPTF
55.6 mm
35.4 mm
45.1 mm
27.6 mm
22.2 mm
22.2 mm
1/2-14 NPTF
1/2-14 NPTF
3/4-14 NPTF
3/4-14 NPTF
S2202-6-6
C
D
S2202-8-8
S2202-12-12
Hex 2
Port 2
D Swivels
Part Number
2.47"
1.57"
2.10"
1.35"
1.06"
1.00"
62.7 mm
40.0 mm
53.3 mm
34.3 mm
27.0 mm
25.4 mm
3.15"
1.92"
2.39"
1.50"
1.38"
1.38"
80.0 mm
48.8 mm
60.7 mm
38.0 mm
34.9 mm
34.9 mm
Female Pipe - Male 37° Flare
A
B
Hex 1
Port 1
Part Number
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2203-4-4
2.19"
1.39"
2.19"
1. 50"
.88"
.88"
1/4-18 NPTF
7/16-20UNF-2A
55.6 mm
35.4 mm
55.5 mm
38.0 mm
22.2 mm
22.2 mm
2.19"
1.39"
2.19"
1.50"
.88"
.88"
3/8-18 NPTF
9/16-18UNF-2A
55.6 mm
35.4 mm
55.5 mm
38.0 mm
22.2 mm
22.2 mm
1/2-14 NPTF
3/4-16UNF-2A
3/4-14 NPTF
1-1/16-12UN-2A
1-11 1/2 NPTF
1-5/16-12UN-2A
S2203-6-6
C
S2203-8-8
D
S2203-12-12
S2203-16-16
Port 2
Hex 2
2.47"
1.57"
2.59"
1.84"
1.06"
1.00"
62.7 mm
40.0 mm
65.8 mm
46.7 mm
27.0 mm
25.4 mm
3.15"
1.92"
3.07"
2.17"
1.38"
1.38"
80.0 mm
48.8 mm
77.9 mm
55.2 mm
34.9 mm
34.9 mm
3.55"
2.13"
3.01"
2.11"
1.63"
1.69"
90.2 mm
54.1 mm
76.5 mm
53.6 mm
41.4 mm
42.9 mm
Female Pipe - Female SAE Straight Thread
A
Hex 1
B
Port 1
Part Number
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2210-6-6
2.19"
1.39"
1.78"
1.09"
.88"
.88"
3/8-18 NPTF
9/16-18UNF-2B
55.6 mm
35.4 mm
45.1 mm
27.6 mm
22.2 mm
22.2 mm
2.47"
1.57"
2.10"
1.35"
1.06"
1.00"
1/2-14 NPTF
3/4-16UNF-2B
62.7 mm
40.0 mm
53.3 mm
34.3 mm
27.0 mm
25.4 mm
3/4-14 NPTF
1-1/16-12UN-2B
S2210-8-8
C
S2210-12-12
D
Port 2
3.15"
1.92"
2.54"
1.65"
1.38"
1.38"
80.0 mm
48.8 mm
64.5 mm
41.9 mm
34.9 mm
34.9 mm
Hex 2
Female Pipe - Female NPSM Pipe Swivel
A
B
Hex 1
Port 1
Part Number
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2207-4-4
2.19"
1.39"
2.05"
1.36"
.88"
.69"
1/4-18 NPTF
1/4-18 NPSM
55.6 mm
35.4 mm
52.0 mm
34.5 mm
22.2 mm
17.5 mm
2.19"
1.39"
2.07"
1.38"
.88"
.88"
3/8-18 NPTF
3/8-18 NPSM
55.6 mm
35.4 mm
52.5 mm
35.1 mm
22.2 mm
22.2 mm
1/2-14 NPTF
1/2-14 NPSM
3/4-14 NPTF
3/4-14 NPSM
1-11 1/2 NPTF
1-11 1/2 NPSM
S2207-6-6
C
S2207-8-8
D
S2207-12-12
Port 2
Hex 2
S2207-16-16
2.47"
1.57"
2.32"
1.57"
1.06"
1.00"
62.7 mm
40.0 mm
59.0 mm
39.9 mm
27.0 mm
25.4 mm
3.15"
1.92"
2.74"
1.85"
1.38"
1.25"
80.0 mm
48.8 mm
69.5 mm
46.9 mm
34.9 mm
31.8 mm
3.55"
2.13"
3.14"
2.23"
1.63"
1.69"
90.2 mm
54.1 mm
79.8 mm
56.6 mm
41.4 mm
42.9 mm
D-30
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
90°
Swivels
S Series
Male 37° Flare - Male Pipe
A
B
Hex 1
Port 1
Part Number
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2301-4-4
2.41"
1.61"
2.19"
1.50"
.88"
.88"
7/16-20UNF-2A
1/4-18 NPTF
61.2 mm
40.9 mm
55.5 mm
38.0 mm
22.2 mm
22.2 mm
2.41"
1.61"
2.19"
1.50"
.88"
.88"
9/16-18UNF-2A
3/8-18 NPTF
61.2 mm
40.9 mm
55.5 mm
38.0 mm
22.2 mm
22.2 mm
3/4-16UNF-2A
1/2-14 NPTF
1-1/16-12UN-2A
3/4-14 NPTF
S2301-6-6
C
S2301-8-8
D
S2301-12-12
Port 2
2.63"
1.73"
2.59"
1.84"
1.06"
1.00"
66.8 mm
44.0 mm
65.8 mm
46.7 mm
27.0 mm
25.4 mm
3.33"
2.10"
3.00"
2.11"
1.38"
1.38"
84.6 mm
53.4 mm
76.2 mm
53.5 mm
34.9 mm
34.9 mm
Hex 2
Male 37° Flare - Female Pipe
B
Hex 1
Port 1
C
Part Number
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2302-4-4
2.41"
1.61"
1.78"
1.09"
.88"
.88"
7/16-20UNF-2A
1/4-18 NPTF
61.2 mm
40.9 mm
45.1 mm
27.6 mm
22.2 mm
22.2 mm
2.41"
1.61"
1.78"
1.09"
.88"
.88"
9/16-18UNF-2A
3/8-18 NPTF
61.2 mm
40.9 mm
45.1 mm
27.6 mm
22.2 mm
22.2 mm
3/4-16UNF-2A
1/2-14 NPTF
1-1/16-12UN-2A
3/4-14 NPTF
S2302-6-6
D
S2302-8-8
S2302-12-12
Port 2
Hex 2
2.63"
1.73"
2.10"
1.35"
1.06"
1.00"
66.8 mm
44.0 mm
53.3 mm
34.3 mm
27.0 mm
25.4 mm
3.33"
2.10"
2.39"
1.50"
1.38"
1.38"
84.6 mm
53.4 mm
60.7 mm
38.0 mm
34.9 mm
34.9 mm
Male 37° Flare - Male 37° Flare
A
Hex 1
B
Port 1
Part Number
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2303-4-4
2.41"
1.61"
2.19"
1.50"
.88"
.88"
7/16-20UNF-2A
7/16-20UNF-2A
61.2 mm
40.9 mm
55.5 mm
38.0 mm
22.2 mm
22.2 mm
2.41"
1.61"
2.19"
1.50"
.88"
.88"
9/16-18UNF-2A
9/16-18UNF-2A
61.2 mm
40.9 mm
55.5 mm
38.0 mm
22.2 mm
22.2 mm
3/4-16UNF-2A
3/4-16UNF-2A
7/8-14UNF-2A
7/8-14UNF-2A
S2303-6-6
C
S2303-8-8
D
S2303-10-10
Port 2
S2303-12-12
Hex 2
S2303-16-16
2.63"
1.73"
2.59"
1.84"
1.06"
1.00"
66.8 mm
44.0 mm
65.8 mm
46.7 mm
27.0 mm
25.4 mm
2.63"
1.73"
2.59"
1.84"
1.06"
1.00"
66.8 mm
44.0 mm
65.8 mm
46.7 mm
27.0 mm
25.4 mm
3.33"
2.10"
3.07"
2.17"
1.38"
1.38"
84.6 mm
53.4 mm
77.9 mm
55.2 mm
34.9 mm
34.9 mm
4.05"
2.64"
3.01"
2.11"
1.63"
1.69"
102.9 mm
67.1 mm
76.5 mm
53.6 mm
41.4 mm
42.9 mm
1-1/16-12UN-2A 1-1/16-12UN-2A
1-5/16-12UN-2A 1-5/16-12UN-2A
Male 37° Flare - Female NPSM Pipe Swivel
A
B
Hex 1
Port 1
Part Number
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2307-4-4
2.41"
1.61"
2.05"
1.36"
.88"
.69"
7/16-20UNF-2A
1/4-18 NPSM
61.2 mm
40.9 mm
52.0 mm
34.5 mm
22.2 mm
17.5 mm
2.41"
1.61"
2.07"
1.38"
.88"
.88"
9/16-18UNF-2A
3/8-18 NPSM
61.2 mm
40.9 mm
52.5 mm
35.1 mm
22.2 mm
22.2 mm
3/4-16UNF-2A
1/2-14 NPSM
1-1/16-12UN-2A
3/4-14 NPSM
S2307-6-6
C
S2307-8-8
D
S2307-12-12
Hex 2
Port 2
2.63"
1.73"
2.32"
1.57"
1.06"
1.00"
66.8 mm
44.0 mm
59.0 mm
39.9 mm
27.0 mm
25.4 mm
3.33"
2.10"
2.74"
1.85"
1.38"
1.25"
84.6 mm
53.4 mm
69.5 mm
46.9 mm
34.9 mm
31.8 mm
Male 37° Flare - Female SAE Straight Thread
A
B
Port 1
Hex 1
Part number
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2310-6-6
2.41"
1.61"
1.78"
1.09"
.88"
.88"
9/16-18UNF-2A
9/16-18UNF-2B
61.2 mm
40.9 mm
45.1 mm
27.6 mm
22.2 mm
22.2 mm
2.63"
1.73"
2.10"
1.35"
1.06"
1.00"
3/4-16UNF-2A
3/4-16UNF-2B
66.8 mm
44.0 mm
53.3 mm
34.3 mm
27.0 mm
25.4 mm
S2310-8-8
C
S2310-12-12
D
Port 2
3.33"
2.10"
2.54"
1.65"
1.38"
1.38"
84.6 mm
53.4 mm
64.5 mm
41.9 mm
34.9 mm
34.9 mm
1-1/16-12UN-2A 1-1/16-12UN-2B
Hex 2
D-31
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
D Swivels
A
90°
Swivels
S Series
Male SAE O-Ring Straight Thread - Male Pipe
A
Hex 1
B
Part number
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2501-6-6
2.13"
1.33"
2.19"
1.50"
.88"
.88"
9/16-18UNF-2A
3/8-18 NPTF
54.1 mm
33.8 mm
55.5 mm
38.0 mm
22.2 mm
22.2 mm
2.40"
1.50"
2.59"
1.84"
1.06"
1.00"
3/4-16UNF-2A
1/2-14 NPTF
61.0 mm
38.2 mm
65.8 mm
46.7 mm
27.0 mm
25.4 mm
1-1/16-12UN-2A
3/4-14 NPTF
Port 1
S2501-8-8
C
S2501-12-12
D
Port 2
3.40"
2.17"
3.00"
2.11"
1.38"
1.38"
86.4 mm
55.2 mm
76.2 mm
53.5 mm
34.9 mm
34.9 mm
Hex 2
Male SAE O-Ring Straight Thread - Female Pipe
A
Hex 1
B
Port 1
Part number
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2502-6-6
2.13"
1.33"
1.78"
1.09"
.88"
.88"
9/16-18UNF-2A
3/8-18 NPTF
54.1 mm
33.8 mm
45.1 mm
27.6 mm
22.2 mm
22.2 mm
2.40"
1.50"
2.10"
1.35"
1.06"
1.00"
3/4-16UNF-2A
1/2-14 NPTF
61.0 mm
38.2 mm
53.3 mm
34.3 mm
27.0 mm
25.4 mm
1-1/16-12UN-2A
3/4-14 NPTF
S2502-8-8
C
D
S2502-12-12
3.40"
2.17"
2.39"
1.50"
1.38"
1.38"
86.4 mm
55.2 mm
60.7 mm
38.0 mm
34.9 mm
34.9 mm
Port 2
D Swivels
Hex 2
Male SAE O-Ring Straight Thread - Male 37° Flare
A
Hex 1
B
Port 1
Part number
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2503-6-6
2.13"
1.33"
2.19"
1.50"
.88"
.88"
9/16-18UNF-2A
9/16-18UNF-2A
54.1 mm
33.8 mm
55.5 mm
38.0 mm
22.2 mm
22.2 mm
2.40"
1.50"
2.59"
1.84"
1.06"
1.00"
3/4-16UNF-2A
3/4-16UNF-2A
61.0 mm
38.2 mm
65.8 mm
46.7 mm
27.0 mm
25.4 mm
7/8-14UNF-2A
7/8-14UNF-2A
S2503-8-8
C
S2503-10-10
D
S2503-12-12
Port 2
Hex 2
S2503-16-16
2.54"
1.64"
2.59"
1.84"
1.06"
1.00"
64.5 mm
41.7 mm
65.8 mm
46.7 mm
27.0 mm
25.4 mm
3.40"
2.17"
3.07"
2.17"
1.38"
1.38"
86.4 mm
55.2 mm
77.9 mm
55.2 mm
34.9 mm
34.9 mm
3.75"
2.33"
3.01"
2.11"
1.63"
1.69"
95.3 mm
59.2 mm
76.5 mm
53.6 mm
41.4 mm
42.9 mm
1-1/16-12UN-2A 1-1/16-12UN-2A
1-5/16-12UN-2A 1-5/16-12UN-2A
Male SAE O-Ring Straight Thread - Female NPSM Pipe Swivel
A
Hex 1
B
Port 1
Part number
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2507-6-6
2.13"
1.33"
2.07"
1.38"
.88"
.88"
9/16-18UNF-2A
3/8-18 NPSM
54.1 mm
33.8 mm
52.5 mm
35.1 mm
22.2 mm
22.2 mm
2.40"
1.50"
2.32"
1.57"
1.06"
1.00"
3/4-16UNF-2A
1/2-14 NPSM
61.0 mm
38.2 mm
59.0 mm
39.9 mm
27.0 mm
25.4 mm
1-1/16-12UN-2A
3/4-14 NPSM
1-5/16-12UN-2A
1-11 1/2 NPSM
S2507-8-8
C
S2507-12-12
D
S2507-16-16
Hex 2
Port 2
3.75"
2.17"
2.74"
1.85"
1.38"
1.25"
86.4 mm
55.2 mm
69.5 mm
46.9 mm
34.9 mm
31.8 mm
3.75"
2.33"
3.14"
2.23"
1.63"
1.69"
95.3 mm
59.2 mm
79.8 mm
56.6 mm
41.4 mm
42.9 mm
Male SAE O-Ring Straight Thread - Female SAE Straight Thread
A
B
Port 1
Hex 1
Part number
A
B
C
D
HEX 1
HEX 2
PORT 1
PORT 2
S2510-6-6
2.13"
1.33"
1.78"
1.09"
.88"
.88"
9/16-18UNF-2A
9/16-18UNF-2B
54.1 mm
33.8 mm
45.1 mm
27.6 mm
22.2 mm
22.2 mm
2.40"
1.50"
2.10"
1.35"
1.06"
1.00"
3/4-16UNF-2A
3/4-16UNF-2B
61.0 mm
38.2 mm
53.3 mm
34.3 mm
27.0 mm
25.4 mm
S2510-8-8
C
S2510-12-12
D
Port 2
3.40"
2.17"
2.54"
1.65"
1.38"
1.38"
86.4 mm
55.2 mm
64.5 mm
41.9 mm
34.9 mm
34.9 mm
1-1/16-12UN-2A 1-1/16-12UN-2B
Hex 2
D-32
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Repair Kits
Swivels
Repair Kits/Seal Options
Repair Kits come complete with primary O-Rings, PTFE backup rings, external and internal dust seals, retaining ring and
instruction sheet.
EP Seals
Fluorocarbon Seals
Size
Kit Number
Size
Kit Number
Size
Kit Number
-4/-6
RK-4/6N
-4/-6
RK-4/6E
-4/-6
RK-4/6V
-8/-10
RK-8N
-8/-10
RK-8E
-8/-10
RK-8V
-12
RK-12N
-12
RK-12E
-12
RK-12V
-16
RK-16N
-16
RK-16E
-16
RK-16V
D Swivels
Nitrile Seals
D-33
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
E Check Valves
Check
Valves
E-1
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Introduction
Check Valves
Multiple Hydraulic System Applications
applications. Parker's in-line style of Check Valves are
available in a variety of sizes, pressure ratings, flow
capacities and crack pressures.
E Check Valves
Parker Check Valves are unidirectional flow control devices
used primarily in hydraulic systems to eliminate potential
damage caused by fluid back pressure. Offered in many
configurations, Parker can satisfy most hydraulic system
E-2
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Table of Contents
Check Valves
Introduction .............................................................E-2
Selection Guide .......................................................E-4
Features & General
Technical Information .............................................E-4
DT Series ........................................................E-5 – E-7
Ordering Information ...............................................E-8
E Check Valves
CV Series......................................................E-9 – E-11
Ordering Information .............................................E-11
E-3
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Technical Information
Check Valves
Pressure at inlet port.
Poppet is moved off seat.
Flow is allowed through valve.
Selection Guide
Poppet
Seat
Body Size
Inlet Port
Material
Rated
Pressure
Crack
Pressure
CV Series
1/4 - 1"
Steel
3000 PSI
5-130 PSI
DT Series
1/4 - 1 1/4"
Steel
5000 PSI
5-200 PSI
Outlet Port
Features
Parker’s Check Valves employ several unique features
that insure years of trouble-free operation. Specific features
for each series of check valves are listed within this section.
Poppet
Pressure at outlet port.
Poppet is against seat.
Flow is blocked at seat.
Crack Pressure
Crack pressure refers to the amount of fluid pressure in the
free flow direction required to move the poppet off the seat.
The normal crack pressure setting is 5 PSI; however, other
crack pressures are available to allow the check valve to
perform special circuit functions, or operate under unique
conditions.
Seat
Inlet Port
Outlet Port
E Check Valves
Check valves are not field repairable or adjustable. Crack
pressure settings are made at the factory only.
Applications
TYPICAL HYDRAULIC CIRCUIT. THE CHECK VALVE IS USED TO
PROTECT THE PUMP BY PREVENTING PRESSURE FROM RETURNING TO THE OUTLET PORT OF THE PUMP.
CHECK
VALVE
PUMP
TANK
RELIEF
VALVE
TANK
CONTROL
VALVE
Oil cooler bypass circuit. If return line pressure becomes
excessive due to resistance through oil cooler (such as startup in
cold weather). Check valve opens and allows oil to bypass the
cooler and flow to the tank.
CYLINDER
The graphic symbol for a check-valve is:
E-4
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
DT Series
Check Valves
Parker DT Series Check Valves Offer the Features of
a Compact Body Size, and 5000 PSI Maximum
Operating Pressure.
The DT Series check valves utilize the dependable, internal
design features found in Parker check valves, but with the
added benefit and convenience of compact design. Sizes are
available from 1/4" to 1-1/4" with six different Fitting Styles.
The DT Series expands Parker's high quality product line of
versatile and efficient check valves.
Features:
1. Compact Design. Easy to plumb into tight circuits.
3. One-piece body eliminates threads and seals that
may be potential leakage points.
4. Smooth flow stream. Poppet spring is isolated from
flow stream.
5. Heat treated poppet to resist damage from shocks
and surges.
FLOW
DT-MFMF
Male Flare 37° JIC Inlet to Male Flare 37° JIC Outlet
FLOW
DT-MOMS
Male O-Ring Boss Inlet to Male Seal-Lok® Outlet
6. Variety of end fittings.
7. Optional crack pressures available from 1 to 200 PSI.
8. Zinc plated exterior finish.
9. Nitrile O-Ring included on MO and MS fittings.
10. Captive O-Ring Groove is standard on
MS end fittings.
FLOW
FLOW
DT-MFMO
DT-MOMF
Male Flare 37° JIC Inlet to Male O-Ring Boss Outlet
Male O-Ring Boss Inlet to Male Flare 37° JIC Outlet
FLOW
DT-MSMO
Male Seal-Lok® Inlet to Male O-Ring Boss Outlet
E-5
FLOW
DT-MSMS
Male Seal-Lok® Inlet to Male Seal-Lok® Outlet
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
E Check Valves
2. All steel construction. No internal gaskets or seals
to wear out.
DT Series
Check Valves
Specifications
The DT Series check valves have a Maximum Operating
Pressure of 5000 PSI. Standard Crack Pressures are 1, 5,
and 65 PSI. Other Crack Pressures up to 200 PSI in 5 PSI
increments are available upon request.
DT-MFMF Male Flare 37° JIC Inlet to Male Flare 37° JIC Outlet
Valve
Size
(inch)
Part Number
Inlet Port
Thread
A
E
F
Hex
B
C
E
Hex
** Std Crack
Size
Pressures
(inch)
(PSI)
B
C
D
3/8
DT-370-MFMF-**
9/16-18 UNF
.56
.44
.56
9/16-18 UNF
.75
1, 5, 65
1/2
DT-500-MFMF-**
3/4-16 UNF
.66
.50
.66
3/4-16 UNF
.88
5, 65
5/8
DT-620-MFMF-**
7/8-14 UNF
.76
.50
.76
7/8-14 UNF
1.06
5
3/4
DT-750-MFMF-**
1-1/16 - 12 UN
.86
.50
.86
1-1/16 - 12 UN
1.25
1, 5, 65
1
DT-1000-MFMF-**
1-5/16 - 12 UN
.91
.62
.91
1-5/16 - 12 UN
1.50
5, 65
1-1/4
DT-1250-MFMF-**
1-5/8 - 12 UN
.96
1.06
.96
1-5/8 - 12 UN
1.88
1, 5
A
FLOW
Dimensions (in)
Outlet Port
Thread
F
D
DT-MFMO Male Flare 37° JIC Inlet to Male O-Ring Boss Outlet
Valve
Size
(inch)
Part Number
Inlet Port
Thread
A
E Check Valves
FLOW
F
Hex
A
B
E
Dimensions (in)
Outlet Port
Thread
B
C
D
1/4
DT-250-MFMO-**
7/16-20 UNF
.55
.44
.43
7/16-20 UNF
.62
5
3/8
DT-370-MFMO-**
9/16-18 UNF
.56
.44
.47
9/16-18 UNF
.75
1, 5, 65
1/2
DT-500-MFMO-**
3/4-16 UNF
.66
.50
.55
3/4-16 UNF
.88
5, 65
5/8
DT-620-MFMO-**
7/8-14 UNF
.76
.50
.63
7/8-14 UNF
1.06
3/4
DT-750-MFMO-**
1-1/16 - 12 UN
.86
.50
.73
1-1/16 - 12 UN
1.25
1, 5, 65
DT-1000-MFMO-** 1-5/16 - 12 UN
.91
.62
.73
1-5/16 - 12 UN
1.50
5, 65
DT-1250-MFMO-**
.96
1.06
.73
1-5/8 - 12 UN
1.88
1, 5
1
1-1/4
1-5/8 - 12 UN
E
Hex
** Std Crack
Size
Pressures
(inch)
(PSI)
F
5
D
C
DT-MOMF Male O-Ring Boss Inlet to Male Flare 37° JIC Outlet
Valve
Size
(inch)
Part Number
Inlet Port
Thread
A
FLOW
A
E
F
Hex
B
C
Dimensions (in)
Outlet Port
Thread
B
C
D
1/4
DT-250-MOMF-**
7/16-20 UNF
.43
.44
.55
7/16-20 UNF
.62
3/8
DT-370-MOMF-**
9/16-18 UNF
.47
.44
.56
9/16-18 UNF
.75
1, 5, 65
1/2
DT-500-MOMF-**
3/4-16 UNF
.55
.50
.66
3/4-16 UNF
.88
5, 65
5/8
DT-620-MOMF-**
7/8-14 UNF
7/8-14 UNF
1.06
3/4
DT-750-MOMF-**
1
1-1/4
E
Hex
** Std Crack
Size
Pressures
(inch)
(PSI)
F
5
.63
.50
.76
1-1/16 - 12 UN
.73
.50
.86
1-1/16 - 12 UN
1.25
1, 5, 65
DT-1000-MOMF-** 1-5/16 - 12 UN
.73
.62
.91
1-5/16 - 12 UN
1.50
5, 65
DT-1250-MOMF-**
.73
1.06
.96
1-5/8 - 12 UN
1.88
1, 5
1-5/8 - 12 UN
5
D
E-6
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
DT Series
Check Valves
DT-MOMS Male O-Ring Boss Inlet to Male Seal-Lok® Outlet
Valve
Size
(inch)
Inlet Port
Thread
Part Number
A
FLOW
E
B
C
D
DT-250-MOMS-**
7/16-20 UNF
.43
.45
.39
.62
5
3/8
DT-370-MOMS-**
9/16-18 UNF
.47
.44
.44
11/16-16 UN
.75
1, 5, 65
1/2
DT-500-MOMS-**
3/4-16 UNF
.55
.50
.51
13/16-16 UN
.88
5/8
DT-620-MOMS-**
7/8-14 UNF
.63
.50
.62
1
1-1/4
B
C
DT-750-MOMS-**
E
Hex
** Std Crack
Size
Pressures
(inch)
(PSI)
1/4
3/4
F
Hex
A
Dimensions (in)
Outlet Port
Thread
9/16-18 UNF
1-14 UNS
F
1.06
5, 65
5
1-1/16 - 12 UN
.73
.50
.68
1-3/16 - 12 UN
1.25
1, 5, 65
DT-1000-MOMS-** 1-5/16 - 12 UN
.73
.62
.70
1-7/16 - 12 UN
1.50
5, 65
DT-1250-MOMS-**
.73
1.06
.70 1-11/16 - 12 UN
1.88
1, 5
1-5/8 - 12 UN
D
DT-MSMO Male Seal-Lok® Inlet to Male O-Ring Boss Outlet
Valve
Size
(inch)
Inlet Port
Thread
Part Number
A
FLOW
F
Hex
B
C
E
E
Hex
** Std Crack
Size
Pressures
(inch)
(PSI)
B
C
D
3/8
DT-370-MSMO-**
11/16-16 UN
.44
.44
.47
9/16-18 UNF
F
.75
1/2
DT-500-MSMO-**
13/16-16 UN
.51
.50
.55
3/4-16 UNF
.88
5/8
DT-620-MSMO-**
1-14 UNS .62
.49
.63
7/8-14 UNF
1.06
5
1, 5, 65
5, 65
3/4
DT-750-MSMO-**
1-3/16 - 12 UN
.68
.50
.73
1-1/16 - 12 UN
1.25
1, 5, 65
1
DT-1000-MSMO-**
1-7/16 - 12 UN
.70
.62
.73
1-5/16 - 12 UN
1.50
5, 65
DT-1250-MSMO-** 1-11/16 - 12 UN
.70
1.06
.73
1-5/8 - 12 UN
1.88
1, 5
1-1/4
D
DT-MSMS Male Seal-Lok® Inlet to Male Seal-Lok® Outlet
Valve
Size
(inch)
Part Number
Inlet Port
Thread
A
Dimensions (in)
Outlet Port
Thread
Hex
** Std Crack
Size
Pressures
(inch)
(PSI)
B
C
D
E
3/8
DT-370-MSMS-**
11/16-16 UN
.44
.44
.44
11/16-16 UN
F
.75
1/2
DT-500-MSMS-**
13/16-16 UN
.51
.50
.51
13/16-16 UN
.88
5/8
DT-620-MSMS-**
1-14 UNS .62
.50
.62
FLOW
F
Hex
A
E
C
5, 65
1.06
5
3/4
DT-750-MSMS-**
1-3/16 -12 UN
.68
.50
.68
1-3/16 - 12 UN
1.25
1, 5, 65
1
DT-1000-MSMS-**
1-7/16 - 12 UN
.70
.62
.70
1-7/16 - 12 UN
1.50
5, 65
DT-1250-MSMS-** 1-11/16 - 12 UN
.70
1.06
.70 1-11/16 - 12 UN
1.88
1, 5
1-1/4
B
1-14 UNS
1, 5, 65
D
E-7
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
E Check Valves
A
Dimensions (in)
Outlet Port
Thread
DT Series
Check Valves
Flow Data
DT Series (1/2", 5/8" & 3/4")
Test Fluid: Oil - 200 SUS
DT Series (1/4" & 3/8")
Test Fluid: Oil - 200 SUS
110
100
100
Pressure Drop in PSID
90
Pressure Drop in PSID
90
80
1/4"
(DT-250)
70
60
3/8"
(DT-370)
50
40
30
80
3/4"
(DT-750)
70
60
50
1/2" & 5/8"
(DT-500 / DT-620)
40
30
20
20
10
10
0
0
0
1
2
3
4
5
6
7
8
9
10
80
90
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
Flow in USGPM
Flow in USGPM
DT Series (1" & 1-1/4")
Test Fluid: Oil - 200 SUS
200
180
Pressure Drop in PSID
E Check Valves
160
140
120
100
1"
(DT-1000)
80
1-1/4"
(DT-1250)
60
40
20
0
0
10
20
30
40
50
60
70
Flow in USGPM
Ordering Information
D T- ✱ ✱ ✱ - ✱ ✱ ✱ ✱ - ✱ ✱
CRACK PRESSURE
01 - 1 PSI
05 - 5 PSI
65 - 65 PSI
Other Crack Pressures up to 200 PSI in 5 PSI
increments are available. Contact the Division
for price and delivery on non-standard
crack pressures
SERIES SIZE
250 - 1/4”
370 - 3/8"
500 - 1/2"
620 - 5/8”
750 - 3/4"
1000 - 1"
1250 - 1-1/4"
FITTING
MFMF MFMO MOMF MOMS MSMO MSMS -
STYLE
Male Flare Inlet to Male Flare Outlet
Male Flare Inlet to Male O-Ring Boss Outlet
Male O-Ring Boss Inlet to Male Flare Outlet
Male O-Ring Boss Inlet to Male Face Seal Outlet
Male Face Seal Inlet to Male O-Ring Boss Outlet
Male Face Seal Inlet to Male Face Seal Outlet
E-8
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
CV Series
Check Valves
CV Series Check Valves Offer Port Thread
Options for Special Plumbing Requirements
Parker’s CV Series check valves are a rugged built and
versatile product designed to protect hydraulic systems from
fluid back pressure. The CV Series compliments the DT
Series by adding the feature of modular design. This two piece
body design offers more end configurations than a one piece
body. The larger body also results in less pressure drop and
increased performance. The CV Series are in-line unidirectional valves, available in sizes 1/4” to 1”, with a pressure
rating of up to 3000 PSI, flow capacities to 100 GPM, and a
variety of port options. Standard spring crack pressures are
5 and 65 PSI. Other crack pressures available upon request.
Features:
1. Nitrile O-ring is standard in the body assembly.
Note port O-rings are included on the MO and MS port options.
3.
6.
5.
4.
1.
2. Available with variety of thread design options.
3. All-steel construction
4. Valve seats resist damage from shocks,
surges and contamination.
5. Poppet has an oil retention groove
that lubricates the bore and eliminates galling.
7. Poppet is heat treated to help prevent damage
from shocks, surges and galling.
2.
8. Close tolerance fit between poppet and poppet retainer
creates a cushion that protects valve from surge shock damage.
7.
8.
9.
9. Optional crack pressures availible upon request.
CV-MFMF
CV-FOFO
Male Flare 37° JIC Inlet to Male Flare 37° JIC Outlet
Female O-ring Boss Inlet to Female O-ring Boss Outlet
CV-FPFP
CV-MOMS
Male O-Ring Boss Inlet to Male Seal-Lok® Outlet
Female Pipe Thread Inlet to Female Pipe Thread Outlet
E-9
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
E Check Valves
6. Poppet spring is isolated from the liquid flow stream,
minimizing turbulence.
Check Valves
Specifications
CV-MFMF Male Flare 37° JIC Inlet to Male Flare 37° JIC Outlet
B HEX
TYP
A
Max
** Std Crack Operating
Outlet Port Pressures Pressure
Thread
(PSI)
(PSI)
Valve
Size
(inch) Part Number
Inlet Port
Thread
Dimensions
(inch)
A
B Hex
1/4
CV-250-MFMF-**
7/16-20 UNF
1.53
.68
7/16-20 UNF
5, 65
3/8
CV-370-MFMF-**
9/16-18 UNF
1.75
.81
9/16-18 UNF
5, 65
3000
1/2
CV-500-MFMF-**
3/4-16 UNF
2.22
1.00
3/4-16 UNF
5, 65
3000
5/8
CV-620-MFMF-**
7/8-14 UNF
7/8-14 UNF
5, 65
3000
3/4
CV-750-MFMF-**
1
3000
2.41
1.12
1-1/16-12 UN
2.75
1.38 1-1/16-12 UN
5, 65
3000
CV-1000-MFMF-** 1-5/16-12 UN
3.31
1.62 1-5/16-12 UN
5, 65
3000
CV-MOMS Male O-Ring Boss Inlet to Male Seal-Lok® Outlet
E Check Valves
B HEX
TYP
A
Max
** Std Crack Operating
Outlet Port Pressures Pressure
Thread
(PSI)
(PSI)
Valve
Size
(inch) Part Number
Inlet Port
Thread
Dimensions
(inch)
A
B Hex
1/4
CV-250-MOMS-**
7/16-20 UNF
1.53
.68
5, 65
3000
3/8
CV-370-MOMS-**
9/16-18 UNF
1.75
.81
11/16-16 UN
5, 65
3000
1/2
CV-500-MOMS-**
3/4-16 UNF
2.22
1.00
13/16-16 UN
5, 65
3000
5/8
CV-620-MOMS-**
7/8-14 UNF
2.41
1.12
5, 65
3000
9/16-18 UNF
1-14 UNS
3/4
CV-750-MOMS-**
1-1/16-12 UN
2.75
1.38
1-3/16-12 UN
5, 65
3000
1
CV-1000-MOMS-**
1-5/16-12 UN
3.31
1.62
1-7/16-12 UN
5, 65
3000
CV-FOFO Female O-ring Boss Inlet to Female O-ring Boss Outlet
B HEX
TYP
A
Max
** Std Crack Operating
Outlet Port Pressures Pressure
Thread
(PSI)
(PSI)
Valve
Size
(inch) Part Number
Inlet Port
Thread
Dimensions
(inch)
A
B Hex
1/4
CV-250-FOFO-**
7/16-20 UNF
1.53
.68
7/16-20 UNF
5, 65
3000
3/8
CV-370-FOFO-**
9/16-18 UNF
1.75
.81
9/16-18 UNF
5, 65
3000
1/2
CV-500-FOFO-**
3/4-16 UNF
2.22
1.00
3/4-16 UNF
5, 65
3000
5/8
CV-620-FOFO-**
7/8-14 UNF
2.41
1.12
7/8-14 UNF
5, 65
3000
3/4
CV-750-FOFO-**
1-1/16-12 UN
2.75
1.38 1-1/16-12 UN
5, 65
3000
CV-1000-FOFO-** 1-5/16-12 UN
3.31
1.62 1-5/16-12 UN
5, 65
3000
1
E-10
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
CV Series
Check Valves
CV-FPFP Female Pipe Thread Inlet to Female Pipe Thread Outlet
Valve
Size
(inch) Part Number
B HEX
TYP
A
Inlet Port
Thread
Dimensions
(inch)
Max
** Std Crack Operating
Outlet Port Pressures Pressure
Thread
(PSI)
(PSI)
A
B Hex
1/4
CV-250-FPFP-**
1/4-18 NPSF
1.53
.75
1/4-18 NPSF
5, 65
3000
3/8
CV-370-FPFP-**
3/8-18 NPSF
1.75
.81
3/8-18 NPSF
5, 65
3000
1/2
CV-500-FPFP-**
1/2-14 NPSF
2.22
1.12
1/2-14 NPSF
5, 65
3000
3/4
CV-750-FPFP-**
3/4-14 NPSF
2.75
1.38
3/4-14 NPSF
5, 65
3000
CV-1000-FPFP-** 1 - 11-1/2 NPSF
3.31
1.62
1 - 11-1/2 NPSF
5, 65
3000
1
Flow Data
CV Series (1/2", 5/8", 3/4" & 1")
Test Fluid: Oil - 200 SUS
CV Series (1/4" & 3/8")
Test Fluid: Oil - 200 SUS
100
70
90
60
3/4"
(CV-750)
40
3/8"
(CV-370)
30
1/4"
(CV-250)
20
10
1/2" & 5/8"
(CV-500 / CV-620)
70
60
E Check Valves
Pressure Drop in PSID
Pressure Drop in PSID
80
50
50
40
30
1"
(CV-1000)
20
10
0
2
4
6
8
10
12
14
16
Flow in USGPM
0
10
20
30
40
50
60
70
80
90
100
Flow in USGPM
Ordering Information
C V- ✱ ✱ ✱ - ✱ ✱ ✱ ✱ - ✱ ✱
CRACK PRESSURE
05 - 5 PSI
65 - 65 PSI
Other Crack Pressures up to 200 PSI in 5 PSI
increments are available. Contact the Division
for price and delivery on non-standard
crack pressures
SERIES SIZE
250 - 1/4"
370 - 3/8"
500 - 1/2"
620 - 5/8”
750 - 3/4"
1000 - 1"
FITTING
FOFO MFMF MOMS FPFP -
STYLE
Female O-Ring Boss Inlet to Female O-Ring Boss Outlet
Male Flare Inlet to Male Flare Outlet
Male O-Ring Boss Inlet to Male Seal-Lok ® Outlet
Female Pipe Inlet to Female Pipe Outlet
E-11
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
F Diagnostic
Quick
Coupling
Diagnostic
Products
F-1
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Introduction
Diagnostic Products
and easy access into hydraulic or pneumatic systems at
remote test points without the use of tools.
Increasing productivity and profitability are the key
elements for a company to successfully compete in the
world market today.
Diagnostic nipples can be permanently installed in
threaded test ports in hydraulic components such as
valves, cylinders, accumulators, filters or pumps.
Reduced machine downtime during initial set-up, trouble
shooting and maintenance procedures means increased
productivity for you. That’s why Parker provides the most
complete line of hydraulic and pneumatic diagnostic
equipment available today.
Diagnostic tube ends, used in conjunction with a 37° flare,
bite type, or O-ring face seal tube fitting, will allow you to
take pressure readings in your systems tubing and hose
lines where threaded test ports may not currently be
available.
With Parker diagnostic equipment you can take critical
measurements from your system with just a push of
a button. Parker diagnostic instruments are designed
to identify hard-to detect variations and peaks in pressures,
temperatures and flow.
From diagnostic nipples to digital readout and printing
equipment, Parker can provide you, from over 600 stocking
distributors, the tools necessary to increase your
productivity through reduced machine downtime.
Parker diagnostic quick couplings and nipples allow quick
F-2
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Table of Contents
Diagnostic Products
Test Port Couplings
PD Series....................................................F-18 - F-20
Dust Cap..............................................................F-18
Couplers ..............................................................F-19
Nipples ......................................................F-19 - F-20
Tube End Nipples ................................................F-20
PDP Series .................................................F-21 - F-23
Dust Cap..............................................................F-21
Couplers ..............................................................F-21
Nipples.................................................................F-22
EMA3 Series..........................................................F-23
Nipples.................................................................F-23
Gauge Adapter & Union ......................................F-24
Transducer Adapters..............................................F-25
Flexible Hose .........................................................F-25
PDFS Series - Fluid Sampling...............................F-26
Couplers ..............................................................F-26
Nipples.................................................................F-26
Ordering Information.............................................F-27
Introduction .............................................................F-2
Table of Contents.....................................................F-3
Product Selection Guide.........................................F-4
ServiceJunior™ .......................................................F-5
SensoControl® Serviceman™
General ....................................................................F-6
Schematic ................................................................F-7
Technical Data .........................................................F-8
Tachometer, Cable & Temp Sensor ................F-8 - F-9
Test Meter Kits .......................................................F-10
SensoControl® ServiceMaster™
General ..................................................................F-11
Schematic ..............................................................F-12
Technical Data .......................................................F-13
SensoControl® Transducer.....................................F-14
Components and Accessories...............................F-15
Test Meter Kits ...................................................... F-16
F Diagnostic
PDF Series Flow Sensors .....................................F-17
F-3
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Product Selection Guide
Diagnostic Products
Meter Selection Guide
Function
ServiceJunior
Serviceman Level 1 Serviceman Level 2 ServiceMaster 350 ServiceMaster 450
•
Pressure Sensing
•
•1
•1
•1
•
•1
•1
•1
•
•
•
•
•
•
•
•
•
•
•
AA (2 req’d)
Rechargeable Ni-MH
Flow Sensing
Temperature Sensing
Rotational Speed Sensing
•
•1
•2
•
•
•
•
•
•
Auxiliary Sensing
Pressure Differential
Automatic Sensor Recognition
Auto Power Off
Battery Monitoring
Battery Type
•
•1
•2
•
•
•
•
•
•
Rechargeable Ni-MH Rechargeable Ni-Cad Rechargeable Ni-Cad
•
•
•1
•
•
•1
•
•
•
Text Display (Lines)
2
1
1
8
8
Inputs
1
2
2
3
6
125,000
250,000
•
•
•
•
•
•
PC Compatible (Windows)
Minimum/Maximum Memory
Self Contained Memory
On-Line Data Transfer
Data Points (Maximum in Memory)
•
Graphic LCD Display
Hydraulic Power Calculations
Volume Calculations
•1
•
•
•
Notes: (1) Additional accessories are required to perform this function.
(2) Transducers provide an ambient temperature signal, but additional temperature probes are required for more accurate temperature measurements.
F Diagnostic
Test Port Coupling Selection Guide
Valving
Body
Size
Flush Face
1/8"
Ball
1/8"
Poppet
1/8"
Material*
Locking
Br SS S P Mechanism
Std. Seal
Material
Temp
Range**
Rated
Pressure
Ball
Nitrile
-40° to +250° F
6000 PSI
Ball
Nitrile
-40° to +250° F
6000 PSI
Threads
Nitrile
-15° to +250° F
9000 PSI
Test Port
PD Series
PDP Series
EMA3 Series
• • •
•
• •
* See Fluid Compatibility chart and/or consult factory for questions regarding proper material for specific applications.
CODE: Br = Brass; SS = Stainless Steel; S = Steel; P = Plastic
**Temperature Range for standard seal material.
Note: See the Specifications Table for PD and PDP Series for more information.
F-4
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
SensoControl ®ServiceJunior ™
Diagnostic Products
Technical Data
The new Parker ServiceJunior captures
momentary pressure spikes that are
“invisible” to normal liquid-filled gauges.
That means the maximum pressure
reading it delivers can be trusted as
a much truer reflection of the
system’s actual condition; so you
can identify potential problems
better and diagnose their causes
faster. All readings are accurate
to within +/-0.5%.
ServiceJunior Features
Measuring
Range
ServiceJunior
with PD Coupler
ServiceJunior
with EMA3 Coupler
ServiceJunior
with 1/4" NPT Port
Overload
Pressure
Resolution
-14.5 to 250 PSI
(-1 to 16 bar)
SCJR-0250-PD
SCJR-0250-EMA
SCJR-0250-4MP
580 PSI
0.1 PSI
0 to 5800 PSI
(0 to 400 bar)
SCJR-5800-PD
SCJR-5800-EMA
SCJR-5800-4MP
11,600 PSI
1 PSI
0 to 8700 PSI
(0 to 600 bar)
SCJR-8700-PD 1
SCJR-8700-EMA 2
SCJR-8700-4MP
17,400 PSI
1 PSI
NOTES: 1. PD Couplers rated to 6,000 PSI max.
2. EMA3 Couplers rated to 9,000 PSI max.
Accessories
Part Number
Description
PD240
SCA-7/16-EMA-3
SCJA-1/4
PDH-19
SMA3-400
SCC-110
SCC-120
PD Series diagnostic coupler
7/16 -18UNF-2B female to M16X2.0 EMA3 female swivel
7/16 -18UNF-2B female to 1/4" NPT male adapter
19" PD Hose extension to be used with PD nipple interface
16” hose assembly for EMA M16X2.0 interface
Storage case for one gauge and diagnostic adapters
Storage case for two gauges and diagnostic adapters
F-5
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
F Diagnostic
• Accuracy +/- 0.5% of full scale
• Three pressure ranges
• Operating temperature 14° to 122º F
• Fluid temperature -4° to 176º F
• Storage temperature -4° to 140º F
• Auto power off after 5 minutes or
"constant on" at the touch of a button
• Zero adjustment function
• 10 msec scanning rate
• Ratings:
Environmental Protection: EN60529 (IP 65)
Vibration: IEC 60068-2-6/10 – 500Hz: 20g
Shock: IEC 60068-2-29/50g 11 msec
• Easy to connect and test system pressure
using Parker Diagnostic test port couplings
• Robust, dirt resistant housing
• Simple to operate, four key menu
• Four digit backlit display with easy to read
large 0.60" characters
• Minimum and maximum graphic display
shows pressure peak
• Power status displayed continuously
• Can be used with most hydraulic and
pneumatic media
• Measure PSI, bar, mPa, kPa with one gauge
SensoControl® Serviceman™
Diagnostic Products
General
Hand-held diagnostic meter to
measure pressure, temperature,
flow and rotational speed for
hydraulic and pneumatic systems
•
•
•
•
•
•
•
Easy operation
Rugged design
Compact dimensions
Large display
Auto sensor recognition
MIN/MAX Memory
Hold function
•
•
•
•
Pressure differential
Low power consumption
External power supply
Data output for PC*
*SCM-150-1-02 Only
F Diagnostic
The Serviceman™ SCM-150 from
Parker is a modern portable diagnostic
measuring system and an excellent alternative to conventional mechanical
pressure gages.
The SCM-150 is a very rugged and
durable test meter that can withstand
even the most demanding environmental conditions. It comes with a
protective rubber cover and integrated
stand making it easy to operate as a
hand-held unit or as a desktop display.
Operating the SCM-150 is very simple.
Everything is controlled by eight easy
to read push buttons. The two sensor
inputs allow you to read pressure, temperature, flow and RPM. The automatic sensor recognition circuit properly
displays the sensor connected to each
of the inputs, eliminating complicated
adjustments and calibrations on the
meter. The unit also features a
memory function that allows you to
store both minimum and maximum
recorded values. Another very
beneficial feature is the “pressure
differential” function. This allows you to
display the actual pressure drop
between two different test points in the
hydraulic or pneumatic system.
Both Serviceman meters are powered
by a rechargeable Ni-MH (Nickel
Metal-Hydride) battery system and
can also be connected to a 120 volt
external power supply for continuous
operation. The low power consumption
allows these units to be used for extended periods of time independent of
an external power supply.
The Serviceman Level 2 can also be
directly interfaced to an Excel spread
sheet via the auxiliary computer
adapter and Serviceman software.
The Parker Serviceman software is
compatible with all Windows 95 and
newer operating systems.
F-6
These Serviceman kits are the ideal
diagnostic tools for maintenance and
service personnel in the industrial, mobile and agricultural markets. Increasing productivity and profitability are key
elements to a company’s success.
These units will help reduce downtime
by providing the best preventative
maintenance and diagnostic data
available.
Parker Hannifin provides the most
complete line of hydraulic and
pneumatic diagnostic equipment
available today. For more information
or to receive a full demonstration,
contact the Quick Coupling Division or
your local distributor.
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
SensoControl® Serviceman™
Diagnostic Products
Schematic
SensoControl® Serviceman™
Measure and Document Flow, Pressure,
Temperature and Rotation Speed
SCK-700-00-58
Meter
SCM–150–1–01
INP1
INP2
Meter
SCM–150–1–02
bar
INP1
INP2
bar
ON/OFF
RESET
ON/OFF
RESET
INP1/2
MAX
INP1/2
MAX
PRINT
HOLD
MIN
PRINT
MIN
HOLD
SensoControl SCM-150
INPUT1
SCPR-150-1-01
Fiber Optic
Connector
SensoControl SCM-150
INPUT2
INPUT1
INPUT2
PC
F Diagnostic
Computer Adapter
Software Kit
SCDA-KIT-152 or
SCDA–150
Flow Sensor
Electronics
(Included With
Flow Sensor)
Diagnostic
Nipple
Temperature Sensor
Port M10 x 1
M10 x 1
Cable
SCK–102–02–08
Temperature Sensor
SCT–150–74–08
Flow Sensor PDF***–***
Diagnostic
Coupler
Pressure
Transducer
PS ✳ ✳ ✳ ✳ – ✳ ✳ ✳ ✳
Adapter
SCTA–1/4
F-7
M10 x 1
To
1/4 NPTF
Tachometer
SCRPM–210
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
SensoControl® Serviceman™
Diagnostic Products
Technical Data
Pressure Transducers
Technical Data
Meter
• 4 Digit LCD Text Display
• 13 mm Character Height
• Display of Pressure, Temperature,
Flow and Rotational Speed
-
Pressure in PSI and Bar
Temperature in °F and °C
Flow in GPM and l/min.
Rotational Speed in RPM
• Automatic Sensor Recognition
• 2 ms Scanning Rate
Housing
• ABS Plastic Housing
• Protective Rubber Cover
• Carrying Strap
• Integral Stand
Ambient Conditions
• Operating Temperatures
32°F to 122°F (0°C to 50°C)
• Storage Temperatures
-4°F to 140°F (-20°C to 60°C)
Output (SCM-150-1-02 Level 2 meter only)
• SC Infrared Interface (RS232C) to
transfer measured values to a PC. The
SCDA-150 software and adapter kit is
required for data transfer to a PC.
Power Requirements (Both Meters)
• SCM-150-1-01 (Level 1)
• SCM-150-1-02 (Level 2)
- 9 Volt Rechargeable
Ni-MH Battery
- Recharge circuit for use with
external power supply.
- Use part number SCSN-450
for operating the meter.
Inputs
• Two 4-pin Round plugs
• 0-3 Volts (R=470 kΩ)
• 12 Bit A/D Converter
1
2
F Diagnostic
INP1 – INP2
bar
2
3
3
4
5
4
ON/OFF
RESET
5
INP1/2
MAX
6
6
1-2
MIN
7
7
PRINT
HOLD
8
8
9
SensoControl SCM-150
9
INPUT1
10
INPUT2
11
12
• PS ✳ ✳ ✳ ✳ TA-015
-14.5 to 220 PSI (-1 to 15 Bar)
• PS ✳ ✳ ✳ ✳ TA-100
0 to 1450 PSI (0 to 150 Bar)
• PS ✳ ✳ ✳ TA-1000
0 to 14,500 PSI (0 to 1000 Bar)
Note: Transducer coupler must be specified
when being ordered. Maximum pressure
rating is based on diagnostic coupling selected.
Construction
• Piezo-Resistive Circuitry
• Stainless Steel Housing
• Stainless Steel Diaphragm
• Fluorocarbon Seals
• Integrated Cable Assembly
Power Requirement
• 7-12 Volt DC Excitation Voltage
• 5 ma Current Requirement
Output
• 0-3 Volts DC
• 1 ms Response Time
• 5 FS/a Long Term Stability
• ± .03 FS Temperature Error
• ± .08 FS Reproducibility
• .5% Accuracy Full Scale
Functional Description SCM-150
1
Pressure Ranges
10
11
12
Measurement Display (4-digit)
RESET resets minimum and maximum values to zero
ON/OFF Switch
MAX displays maximum value
since meter was last reset or
turned on
INP1/2 selects whether meter will
display measurement from Input
1 or Input 2
∆1-2 displays the differential value
of Input 1 minus Input 2
MIN displays minimum value since
meter was last reset or turned on
PRINT* sends displayed measurements to PC or printer
HOLD freezes displayed measurement
Analog Inputs (4 pin)
External Power Supply Socket
Data Output* infrared interface
to transmit measured values
to PC
Transducer shown with
PD Style Coupler option.
Temperature Probe
SCT-150-74-08
-13°F to 257°F
(25°C to 125°C)
* SCM-150-1-02 only
F-8
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
SensoControl® Serviceman™
Diagnostic Products
Components and Accessories
Order Code
Order No.
SCM-150-1-01
SCM-150-1-02
SCC-150
SCSN-450
Description
Serviceman™ Level 1 hand-held meter
Serviceman™ Level 2 hand-held meter
Storage case for Serviceman™ Level 1 or Level 2
120 Volt AC power supply/recharger for Serviceman™ and ServiceMaster™ meters
SCK-102-02-08
Connecting cable (4-pin to 5-pin) required to connect flow sensors
and PDT transducers to the Serviceman™ meters (2 m length)
Extension cable used in series with the 4-pin PST transducer assemblies (3 m length)
Replacement paper for thermal printer SCPR-150-1-01
Computer adapter and software to transfer data from Serviceman™ Level 2
to a PC (Includes computer cable) Contact the Division for ordering assistance
Tachometer used to measure rotational speed (20 to 10,000 RPM)
Contact adapter for SCRPM-210 tachometer
Focus adapter for SCRPM-210 tachometer
Temperature sensor used with the PDF flow sensors or with SCTA-1/4 port adapter
Port adapter to convert M10 X 1 to 1/4" NPT for use with the SCT-150-74-08
Diagnostic test hose assembly (.5 m length extension hose assembly used with PD transducers and diagnostic nipples)
PD style pressure transducer adapter
PDP style pressure transducer adapter
EMA3 female pressure transducer adapter
EMA3 male pressure transducer adapter
Serviceman™ training manual
Serviceman™ printer kit – includes SCK-700-00-58 interface cable, power supply & SCPR-150-1-01 printer
SCK-108-03-18
SCG-022
SCDA-150
SCDA-KIT-152
SCRPM-210
SCRPMA-001
SCRPMA-002
SCT-150-74-08
SCTA-1/4
PDH-19
PD288
PDP288
SCA-1/2-EMA-3
SCA-1/2-EMA-3-S
SCM150-TM
SCPR-KIT-150
5 pin to 4 pin Cable
SCRPM Tachometer
Temperature Sensor
SCRPM-210
Connector
4-pin DIN
5 Pin – 4 Pin
Flow Sensor to
Serviceman™ Cable
SCK-102-02-08
Compatibility
Serviceman™
Temperature Sensor
(Serviceman™)
SCT-150-74-08
Accessories
Part Number
SCRPMA-001
SCRPMA-002
Description
Contact adapter for belt drive/wheel
Focus adapter for confined areas
The SCRPM Tachometer provides precision measurement of
rotational speed. This sensor emits a light beam through an LED
source. This light source is reflected and picked up as a pulse. It is
then converted to an analog signal and displayed on the hand held
meter.
Technical Data
Measuring Range ...................................................20 – 10,000 RPM
Measuring Distance ................................................0.1 – 19.5 inches
Accuracy.....................................................................................0.5%
Excitation Voltage...............................................................7 – 9 VDC
Output Signal .....................................................................0 – 3 VDC
Resolution ...............................................................................5 RPM
F-9
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
F Diagnostic
Part Number
SCRPM-210
SensoControl® Serviceman™
Diagnostic Products
Test Meter Kits
Test Meter Kits
Serviceman Level 1
Meter Kit
SCC-150
SCM-150-1-01
(See Below)
SCSN-450
SCM150-TM
Kit Contents:
Case
Serviceman Meter
Transducers (Quantity 1 or 2)
Power Supply – Meter
Instruction Manual*
Serviceman Level 2
Meter Kit
SCC-150
SCM-150-1-02
(See Below)
SCSN-450
SCM150-TM
* Included with Serviceman Meter
Code for Ordering
Serviceman Meter Kits:
PD XX - XXX - XX - XX (If second Transducer is ordered as part of Kit)
Port Style
PRESSURE
-14.5 – +220 PSI (Low)
0 – 1450 PSI (Medium)
0 – 14,500 PSI (High)
CODE DESCRIPTION
200
400
600
PD Style
PDP Style
EMA3 Style (Female)
CODE DESCRIPTION
Meter Style
F Diagnostic
CODE
01
05
10
Transducer Style
S1
S2
Serviceman Level 1 Meter
Serviceman Level 2 Meter
Code for Ordering
Additional Transducers Separately:
PS XXXXXX - XXXX
CODE
Transducer Style
CODE
DESCRIPTION
PRESSURE
015 -14.5 – +220 PSI (Low)
100
0 – 1,450 PSI (Medium)
1000
0 – 14.500 PSI High)
TA
PD Style
PTA
PDP Style
EMA3TA EMA3 Style (Female)
Port Style
Code for Ordering
Flow Sensors (Generation II) Separately:
CODE
PDF XXX - XXXX
Flow Sensor Style
Nipple Style
CODE
DESCRIPTION
PD
PDP
EMA
PD Style
PDP Style
EMA Style
FLOW RATE
0004 .25 – 4 GPM (1.0 – 15 L/Min)
0216
2 – 16 GPM (7.5 – 60 L/Min)
0480
4 – 80 GPM (15 – 300 L/Min)
7160
7 – 160 GPM (25 – 600 L/Min)
NOTES: Cable SCK-102-08 is required for using Flow Sensors with Serviceman Meters.
F-10
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
SensoControl® ServiceMaster™
Diagnostic Products
General
Hand-held diagnostic meter
to measure pressure,
temperature, flow and rotational speed for hydraulic
and pneumatic systems
• Easy operation
• Rugged design
• Large display
• Auto sensor recognition
• MIN/MAX Memory
• On-line operation
• Multiple sensor inputs
• Battery monitoring
The ServiceMaster™ meter is a stateof-the-art instrument designed to
provide the latest in diagnostic
evaluation in hydraulic and pneumatic
systems. These units are available in
either three or six channel models.
The new ergonomically designed case
and large automatic scaling LCD
display make it easy to use in even
the most demanding environments.
These hand held meters provide
measurement and display of pressure,
temperature, flow, differential
pressures, as well as rotational speed.
They are the perfect tool to capture
diagnostic measurements at remote
locations. Also new to these meters
are the functions for calculating power
and flow run-out.
The meters are designed to offer a
dramatic increase in data storage
capability. The SCM-350 offers
125,000 data points and the top-ofthe-line SCM-450 now offers 250,000
data points of storage. These
measurements can be transferred to a
PC via an RS232 interface and the
new SensoWin™ 4.0 software. This
software is compatible with all
Windows95, Windows98, and
WindowsNT operating systems.
As with all SensoControl® equipment,
the ServiceMaster offers the latest in
sensor recognition technology,
eliminating the time consuming task of
programming each individual sensor.
This technology allows you to just
plug in the sensor, and you are ready
F-11
to take measurements. The
ServiceMaster™ meter also allows
you to program the individual inputs to
accept other data collection formats,
such as 4-20 ma, 0-10 Volt, or
frequency.
Parker Hannifin provides the most
complete line of hydraulic and
pneumatic diagnostic equipment
available today. For more information
or to receive a full demonstration,
contact the Quick Coupling DIvision or
your local distributor.
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
F Diagnostic
• Analog output
SensoControl® ServiceMaster™
Diagnostic Products
Schematic
SensoControl® ServiceMaster™
Measure and Document Flow, Pressure, Voltage, Current
Temperature and Rotation Speed
Meter
SCM-350-1-01
Meter
SCM-450-1-01
ServiceMaster
ServiceMaster
ON/OFF
SETUP
OPTION
ON/OFF
DATA
OUTPUT
RECORD
DATA
OUTPUT
STOP
START
ESC
|1 - |2
|1 = |2
RECORD
STOP
ENTER
START
ESC
|1 - |2
|1 = |2
TEMP
MIN/MAX
ACTUAL
RESET
Meter Power Supply / Recharger
SCSN-450
SETUP
OPTION
ENTER
TEMP
SensoControl
MIN/MAX
ACTUAL
RESET
SCSN-450
Connect To
Serial Port
On A PC With
SCSW-400
Software
Pressure
Transducer
PD ****–****
Flow Sensor
Electronics
(Included With
Flow Sensor)
Diagnostic
Nipple
Cable
SCK-102-02 -02
Cable
SCK-102-02-02
F Diagnostic
Cable
SCK-313-02-31
M10 x 1
Temperature Sensor
Port M10 X 1
Temperature Sensor
SCT-150-74-02
Tachometer
SCRPM–220
Diagnostic
Coupler
Flow Sensor PDF ***–***
Adapter
SCTA-1/4
F-12
M10 X 1
To
1/4 NPTF
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
SensoControl® ServiceMaster™
Diagnostic Products
Technical Data
Meter
• Digital LCD Text Display
-128x64 pixels
• Automatic Character Height Scaling
• Display of Pressure, Temperature,
Flow and Rotational Speed
- Pressure in PSI and Bar
- Temperature in °F and °C
- Flow in GPM and l/min.
- Rotational Speed in RPM
Inputs
• 3 or 6, 5-pin push-pull style connectors
• Automatic Sensor Recognition
• 0-3 Volts (R=470 kΩ)
• 12 Bit A/D Converter
• 1 ms Scanning Rate (1-3 inputs)
• 2 ms Scanning Rate (4-6 inputs)
• Frequency input via Input socket I3
- frequency range 0.5 Hz to 30 kHz
Functions
• Differential Value Measurement
• MIN/MAX Memory
• Online data transfer
• Battery level indicator
• Power calculation (display only)
• Flow run-out (display only)
• Auto power off
Output
• RS232 interface
• Adjustable baud rate
up to 38400 BPS
• 8 data bits, 1 stop bit
Power Requirements
• Internal 7.2-volt rechargeable
Ni-Cad battery
• Recharge circuit for use with
external power supply.
• Operating time (Aprox. 5 hours)
• Excitation voltage (12-30 VDC)
Memory Functions
• Memory capacity
-125,000 data points (SCM-350)
-250,000 data points (SCM-450)
• Memory used in 25,000 data
point intervals
• Variable storage rate
• Variable measuring period
up to 100 hours
• Manual and automatic triggering
Ambient Conditions
• Operating Temperatures
32°F to 122°F (0°C to 50°C)
• Storage Temperatures
-4°F to 140°F (-20°C to 60°C)
• Protection class IP54
Housing
• Glass reinforced polyamide
• 11-Key tactile touch membrane
• EMC Protection
- Electromagnetic interference
(DIN/EN 50081, Part 1)
- Immunity to emitted interference
(DIN/EN 50082, Part 2)
General Information
Dimensions
• Length/Height/Width
- 9.25 x 4.19 x 2.09
(235 x 106 x 53 mm)
Weight
• 1.2 lbs (700 grams)
12
1
2
3/4
5
17
19
6
7
8
22
ServiceMaster
20
9
1
ON/OFF
SETUP
OPTION
21
10
11
2
12-17
18
3
9
DATA
OUTPUT
6
STOP
7
|1 - |2
RECORD
ESC
|1 = |2
11
10
START
19
5
ENTER
20
8
TEMP
MIN/MAX
ACTUAL
RESET
21
4
22
F-13
ON/OFF Turns meter on or off
SETUP/OPTION Change system settings
ARROWS Select line and function values
START/ENTER Change function values and start
measurements
STOP/ESC Stop or terminate functions
I1-I2 Differential value between input 1 and input 2.
TEMP Displays the measured temperature values for
all channels
DATA-OUTPUT Displays output to PC, printer or
graphic display
RECORD To record and store measurements
MIN/MAX/ACTUAL Displays the minimum,
maximum and actual values. Reset deletes values
INPUTS Inputs for up to (6) sensors
11-30 VDC Input for external power supply and
charging of internal battery
DATA OUTPUT RS232 port for connecting to the
PC, printer, or external trigger module
GRAPHIC LCD Displays measured values,
adjustment menus and graphics.
ADDITIONAL LINE Displays the power or flow
runout values.
STATUS LINE Shows the designation of the
measured value or the menu name.
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
F Diagnostic
Functions
18
SensoControl® ServiceMaster™
Diagnostic Products
Transducer
Features
• Five measurement ranges
(Vacuum to 8700 PSI)
• Color coded for easy identification
• Corrosion proof stainless steel housing
• Accuracy of .5% Full Scale (FS)
Transducer Technical Data
Measuring Range (Pressure)
Color Code
Measuring Range (Temp.)
Max. Overload Pressure
Output Signal (Volts)
Hysteresis (% FS Typical)
Repeatability (%FS Typical)
Non-conformity (%FS)
Response Time
Excitation Voltage
PD ✳ ✳ -0100
-14.5 to 145
Blue
-13°F to 221°F
290
-0.2 to 2
0.1
0.08
0.25
1 ms
7-12 VDC
PD ✳ ✳ -0600
0 to 870
Green
-13°F to 221°F
1450
0 to 3
0.05
0.13
0.2
1 ms
7-12 VDC
PD ✳ ✳ -1500
0 to 2175
Yellow
-13°F to 221°F
3625
0 to 3
0.1
0.13
0.2
1 ms
7-12 VDC
PD ✳ ✳ -4000
0 to 5800
Orange
-13°F to 221°F
14500
0 to 3
0.08
0.1
0.28
1 ms
7-12 VDC
PD ✳ ✳ -6000
0 to 8700(1)
Red
-13°F to 221°F
14500
0 to 3
0.05
0.1
0.25
1 ms
7-12 VDC
F Diagnostic
(1) Maximum Rated Pressure for PD Series Couplers is 6000 psi.
Materials of Construction
Output
Transducer ......................Stainless steel
Diaphragm ......................Stainless steel
Coupler ........................Zinc Plated steel
Seal...................................Fluorocarbon
Accuracy...................................0.5% FS
Load ........................................2m ohms
Response time ...............................1 ms
Output signal to noise ...............0.1%FS
Resonant frequency ...................100 Hz
Temperature Range
Working .................................-4° to 185°
Fluid ....................................-13° to 221°
Storage ...............................-40° to 257°
Voltage Requirement
7 to 12 VDC excitation voltage
Permissible ripple .......................±2% ss
Current requirement ......................5 mA
F-14
Cable End
(Pin Out)
Pin
1
2
3
4
5
Mark
P
T
+
–
SK
Wire Colors
yellow
white
brown
green
grey
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
SensoControl® ServiceMaster™
Diagnostic Products
Components and Accessories
Order Code
Order No.
SCM-350-1-01
SCM-450-1-01
SC-690
SCSN-450
SCK-102-02-02
SCK-102-03-12
SCK-102-05-02
SCG-022
SCSW-400
SCK-313-02-31
SCRPM-220
SCRPMA-001
SCRPMA-002
SCDA-410
PDH-19
PD288
PDP288
SCA-1/2-EMA-3
SCA-1/2-EMA-3-S
SCT-150-74-02
SCTA-1/4
SCMA-VADC-250
Description
ServiceMaster hand-held meter, 3 Inputs, 125,000 data points (includes SCSN-450)
ServiceMaster hand-held meter, 6 Inputs, 250,000 data points
Case for ServiceMaster 350/450 meter kits
120 Volt AC power supply/recharger for ServiceMaster 350/450 meters
Connection cable between the meter and the sensors (2 m length)
Extension cable to be used in series with standard cables (3 m length )
Extended version of cable between the meter and the sensors (5 m length)
Replacement paper for thermal printer SCPR-100-1-01
SensoWin™ 4.0 software for data transfer to the PC (Windows 98 and newer)
Data cable between the RS232 meter port and a PC
Tachometer to be used to measure rotational speed (0 to 10,000 RPM)
Contact adapter for SCRPM-210 tachometer
Focus adapter for SCRPM-210 tachometer
Adapter kit for desk top printers. Compatible with Cannon BJC 8S or HP HP340 or equivalent
Diagnostic test hose assembly (.5 m length extension hose assembly used with PD transducers and diagnostic nipples)
PD style pressure transducer adapter
PDP style pressure transducer adapter
EMA3 female pressure transducer
EMA3 male pressure transducer
Temperature sensor used with the PDF flow sensors or with the SCTA-1/4 port adapter .....................
Port adapter to convert M10 X 1 to NPT for use with the SCT-150-74-02 Transducer Adapters
Voltage Adapter for use with Auxiliary Sensors
5 pin to 5 pin Cable
SCRPM Tachometer
Part Number
SCK-102-02-02
Part Number
SCRPM-220
Connector
5-pin push-pull style
Compatibility
ServiceMaster™
Temperature Sensor
Part Number
SCT-150-74-02
Accessories
Part Number
SCRPMA-001
SCRPMA-002
Description
Contact adapter for belt drive/wheel
Focus adapter for confined areas
Description
ServiceMaster™
Temperature Sensor
The SCRPM Tachometer provides precision measurement of
rotational speed. This sensor emits a light beam through an LED
source. This light source is reflected and picked up as a pulse. It is
then converted to an analog signal and displayed on the hand held
meter.
Voltage Adapter
Part Number
SCMA-VADC-250
Technical Data
Description
For Use with Auxiliary
Sensors to ServiceMaster
Input: 0 - 20 MA or 0 - 10 VDC
Accuracy: 0.25% FS
Measuring Range ...................................................20 – 10,000 RPM
Measuring Distance ................................................0.1 – 19.5 inches
Accuracy.....................................................................................0.5%
Excitation Voltage...............................................................7 – 9 VDC
Output Signal .....................................................................0 – 3 VDC
Resolution ...............................................................................5 RPM
F-15
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
F Diagnostic
Description
Flow Sensor and Transducer
Cable to ServiceMaster™
SensoControl® ServiceMaster™
Diagnostic Products
Test Meter Kits
Test Meter Kits
ServiceMaster 350
Meter Kit
SC-690
SCM-350-1-01
(See Below)
SCK-102-02-02
SCSN-450
SCSW-400
SCK-313-02-31
Kit Contents:
Case
ServiceMaster Meter
Transducers (Quantity 2)
Transducer Cable, 6.5’ (Quantity 2)
Power Supply – Meter
SensoWin Software 4.0
Computer Interface Cable
Operating Manual*
ServiceMaster 450
Meter Kit
SC-690
SCM-450-1-01
(See Below)
SCK-102-02-02
SCSN-450
SCSW-400
SCK-313-02-31
* Included with ServiceMaster Meter
Code for Ordering
ServiceMaster Meter Kits:
CODE
PDSM XX - X - XX - XX
Transducer Style (Choose two)
01
06
15
40
60
PRESSURE
-14.5 – +145 PSI
0 – 870 PSI
0 – 2175 PSI
0 – 5800 PSI
0 – 8700 PSI
COLOR
Blue
Green
Yellow
Orange
Red
CODE DESCRIPTION
2
4
6
Port Style
PD Style
PDP Style
EMA3 Style (Female)
CODE DESCRIPTION
F Diagnostic
Meter Style
35
45
Code for Ordering
Additional Transducers Separately:
CODE
Transducer Style
CODE
DESCRIPTION
TA
PTA
TEMA3
PD Style
PDP Style
EMA3 Style (Female)
Code for Ordering
Flow Sensors (Generation II) Separately:
CODE
PDF XXX - XXXX
Flow Sensor Style
CODE DESCRIPTION
Nipple Style
PRESSURE
0100 -14.5 – +145 PSI
0600
0 – 870 PSI
1500
0 – 2175 PSI
4000
0 – 5800 PSI
6000
0 – 8700 PSI
PD XXXXXX - XXXX
Port Style
ServiceMaster 350 Meter
ServiceMaster 450 Meter
COLOR
Blue
Green
Yellow
Orange
Red
FLOW RATE
0004 .25 – 4 GPM (1.0 – 15 L/Min)
0216
2 – 16 GPM (7.5 – 60 L/Min)
0480
4 – 80 GPM (15 – 300 L/Min)
7160
7 – 160 GPM (25 – 600 L/Min)
PD
PD Style
PDP PDP Style
EMA EMA Style
F-16
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
SensoControl®
Diagnostic Products
Flow Sensors
Description
The SensoControl® Generation II flow sensors are a compact
light-weight aluminum diagnostic tool capable of measuring
pressure, temperature and flow from a single test point in a
hydraulic system.
The Generation II flow sensors are designed to be used with
a wide variety of hydraulic fluids. This design also minimizes
the effect of viscosity changes. These units are manufactured
from solid aluminum bar stock and are rated to 5800 PSI* and
temperatures of 0°F +350°F. They are available in four sizes
with flow measuring ranges from .25 – 160 GPM.
Generation II flow sensors are provided with a choice of PD,
PDP or EMA style diagnostic ports and are designed to be
used with Serviceman™ and ServiceMaster™ equipment.
Technical Data
Pressure Rating*.........................................................5800 PSI
* PDF–7160 is rated to 5000 psi
Fluid Temperature Range....................................0°F to +350°F
Ambient Temperature Range ..............................0°F to +120°F
Media/Compatibility.............................Petroleum Based Fluids
Performance
Flow Data
(Supplied by SensoControl meter)
Current Requirement .........................................................6mA
Material Specifications
Flow Block . . . . . . . . . . . . . . . . . . . . . . . Anodized Aluminum
Turbine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stainless Steel
Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Stainless Steel
Seal Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Nitrile
Electrical Connection . . . . . . . . . . . . . . .5 Pin Push-Pull Style
14
12
10
PDF-0004
8
PDF-0216
6
4
2
0
0
2
4
6
12
14
16
Flow Data
25
Pressure Drop in PSID
8
10
Flow in USGPM
F Diagnostic
Flow Measurement Accuracy.........................±2.0% Full Scale
Voltage Input ........................................................+7 to 12 VDC
Pressure Drop in PSID
(Contact factory for use with water based hydraulic fluids)
20
PDF-7160
15
PDF-0480
10
5
0
0
20
How to Order
Measuring
Range
Flow Sensor
with PD Nipple
Flow Sensor
with PDP Nipple
Flow Sensor
with EMA Nipple
40
60
80
100
Flow in USGPM
Inlet/Outlet Port
Configuration
120
Length
inches
Height
inches
140
Width
inches
.25 GPM to 4 GPM (1.0 to 15 l/min)
PDFPD-0004
PDFPDP-0004
PDFEMA-0004
3/4-16 ORB
4.72
3.72
1.23
2 GPM to 16 GPM (7.5 to 60 l/min)
PDFPD-0216
PDFPDP-0216
PDFEMA-0216
1 1/16-12 ORB
5.08
4.05
1.48
4 GPM to 80 GPM (15.0 to 300 l/min)
PDFPD-0480
PDFPDP-0480
PDFEMA-0480
1 5/16-12 ORB
5.87
4.46
1.98
7 GPM to 160 GPM (25.0 to 600 l/min)
PDFPD-7160
PDFPDP-7160
PDFEMA-7160
1 5/8-12 ORB
6.81
4.75
2.46
F-17
16
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Test Port Couplings
Diagnostic Products
PD Series
Applications
PD Series couplings provide easy connection for mechanical
gauges or specialized diagnostic equipment like SensoControl®.
Typically, PD or BPD nipples are permanently mounted in the
system at threaded test ports, in rigid tubing or in hose
assemblies. PD couplers are attached to test instruments.
Couplers align to the mating nipples without threading. This
allows gauges, transducers and other test equipment to be
snapped into place without difficulty.
Note: Protective dust plugs and caps play a crucial role in the
life of a quick coupling and no purchase of a hydraulic quick
coupling is complete without the selection of an appropriate
dust plug and cap. See pages noted in Table of Contents for
dust plugs and caps for the Parker full line of hydraulic
couplings.
Features
Ordering information
• Flush-face poppet valves minimize air inclusion and
spillage, provide easy-to-clean surfaces, and help to
prevent contamination.
Coupler/Nipple Material
• Prefix “B” for Brass body
• Prefix “SS” for Stainless Steel body
• Standard body material is Steel
• Grip-tight knurled sleeves help to make connecting and disconnecting easy, even while wearing gloves.
• Nipples are machined from high tensile steel for strength to
withstand 6000 PSI continuous operating pressure. BPD
nipples offer features similar to the standard steel PD
nipples with the added feature of a brass body.
Optional Seals Suffix*
No suffix is required when ordering products with the
standard Nitrile seals. When specifying an optional seal,
refer to the following chart to determine the appropriate
suffix.**
• PD nipples are designed to meet or exceed SAE J1502 and
ISO 15171-1 design and performance specifications.
• End connections include pipe, O-ring, metric thread,
bulkhead, 37° Flare, ORFS and bite-type.
Ethylene
Propylene
Fluorocarbon
PD Series
W
Y
Z
PDP Series
W
Y
Z
Coupling Series
Neoprene Perfluoroelastomer
F Diagnostic
*To select proper seal materials, see Fluid Compatibility Chart in Appendices
section, or contact your Parker Quick Coupling Distributor.
**N/A = Not Available; STD = Standard (No Suffix Needed)
Specifications
Body Size
Description
Part Number
PD Coupler
1/8
PD Nipple
BPD Nipple
Assembly
PD242
PD361
BPD343Y
—
Body Material (Steel)
Carbon Steel
High Tensile
Steel
Brass
—
Rated Pressure (PSI)
6000
6000
300
6000
Temperature Range (STD Seals) Nitrile
-40°F to +250°F
Rated Flow (GPM)
—
Max. Recommended Flow (GPM)
Burst Pressure (PSI/Min)
Vacuum Data (Inches Hg)
Pressure Drop at Rated Flow
(PSI) with 200 SUS Fluid
Spillage at 15 PSI (ml)-Assembly
Air Inclusion (ml)-Assembly
Connect Force-Assembly
Disconnect Force-Assembly
-15°F to +400°F -40°F to +250°F
(Fluorocarbon)
—
—
Body Size
(in.)
Dust Cap
Part No.
1/8
PD6-285
0.8
—
—
—
4.0
23,000
40,000
—
17,000
27.5
27.5
27.5
27.5
—
—
56
—
PD Series
DUST CAP
0.1 per disconnect
0.02 per connect
41 Lbs. (100 PSI)
20 Lbs. (100 PSI)
F-18
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Test Port Couplings
Diagnostic Products
PD Series
Couplers
Female Thread
A
Body
Size
(in.)
Part
No.
Female
Thread
NPTF
Female
Thread
ORB
1/8
1/8
1/8
1/8
1/8
PD222
PD240
PD242
SSPD242Y**
PD260
1/8-27
–
1/4-18
1/4-18
–
–
7/16-20
–
–
9/16-18
Body
Size
(in.)
Part
No.
Male
Thread
NPTF
Male
Thread
ORB
1/8
PD243
1/4-18
–
C
B
Male Thread
Dimensions (in.)
Overall Wrench Largest Wt. (LB.)
Length Flats Diameter P/Piece
A
1.67
2.12
2.12
2.12
2.12
B
0.81
0.81
0.81
0.81
0.81
C
0.96
0.96
0.96
0.96
0.96
0.20
0.26
0.25
0.25
0.24
A
C
Dimensions (in.)
Overall Wrench Largest Wt. (LB.)
Length Flats Diameter P/Piece
A
2.26
B
0.81
C
0.96
0.23
B
Nipples
Female Pipe Thread
D
Body
Size
(in.)
Part
No.
Thread
Size
NPTF
Overall
Length
1/8
1/8
PD322
PD342
1/8-27
1/4-18
D
1.48
1.63
Body
Size
(in.)
Part
No.
Thread
Size
NPTF
Overall
Length
1/8
PD323
1/8-27
D
1.55
E
0.85
F
0.69
G
0.79
0.17
1/8 BPD323Y* 1/8-27
1/8 BPD343Y* 1/4-18
1/8
PD343
1/4-18
1/8 SSPD343Y** 1/4-18
1/8
PD363
3/8-18
1.44
1.48
1.48
1.48
1.50
0.74
0.78
0.78
0.78
1.13
0.63
0.69
0.69
0.69
0.81
0.72
0.79
0.79
0.79
0.96
0.17
0.06
0.06
0.06
0.09
Largest
Diameter
Wt. (LB.)
P/Piece
G
0.79
0.87
1.01
1.08
0.87
0.17
0.08
0.08
0.09
0.07
E
G
Dimensions (in.)
Exposed
Hex
Length
Size
E
0.78
0.93
F
0.56
0.75
Largest
Diameter
Wt. (LB.)
P/Piece
G
0.65
0.87
0.06
0.12
F
D
E
G
F
Metric Thread
D
E
Body
Size
(in.s)
Part
No.
Thread
Size
Metric
Overall
Length
1/8
1/8
1/8
1/8
1/8
PD357
PD367C
PD3107
PD3127
PD3147
M10 x 1.0
M14 x 1.5
M16 x 1.5
M18 x 1.5
M20 x 1.5
D
1.80
1.50
1.54
1.60
1.50
Body
Size
(in.)
Part*
No.
Thread
Size
ORB
Overall
Length
1/8
1/8
1/8
1/8
PD331
PD341
PD351
PD361
3/8-24
7/16-20
1/2-20
9/16-18
D
1.80
1.60
1.32
1.32
G
F
Male Straight Thread
D
E
G
F
Dimensions (in.)
Exposed
Hex
Length
Size
Dimensions (in.)
Exposed
Hex
Length
Size
E
1.10
0.80
0.84
0.90
0.80
F
0.69
0.75
0.88
0.94
0.75
Dimensions (in.)
Exposed
Hex
Length
Size
E
1.10
0.90
0.62
0.62
F
0.69
0.69
0.63
0.69
Largest Wt. (LB.)
Diameter P/Piece
Largest Wt. (LB.)
Diameter P/Piece
G
0.79
0.79
0.72
0.79
0.17
0.08
0.05
0.06
* Note: Add -6 to part number to include dust cap, for example PD343-6
* BPD designates brass body, Fluorocarbon seal standard
** SSPD designates 316SS body, Fluorocarbon seal standard
F-19
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
F Diagnostic
Male Pipe Thread
Test Port Couplings
Diagnostic Products
PD Series
Nipples
Bulkhead Triple-Lok
D
E
G
F
Bulkhead Seal-Lok
D
E
G
F
Body
Size
(in.)
Part
No.
Steel
Thread
Size
Tube
Size
Dimensions (in.)
Overall Exposed
Hex
Length Length
Size
1/8
1/8
1/8
PD345
PD355
PD365
7/16-20
1/2-20
9/16-18
1/4
5/16
3/8
Body
Size
(in.)
Part
No.
Steel
Thread
Size
Tube
Size
1/8
PD346
9/16-18
1/4
D
2.98
E
2.27
F
0.81
G
0.94
–
1/8
1/8
PD366 11/16-16
PD386 13/16-16
3/8
1/2
3.08
3.18
2.37
2.47
1.00
1.12
1.16
1.30
–
–
D
2.92
2.92
3.00
E
2.22
2.22
2.30
Largest Wt. (LB.)
Diameter P/Piece
F
0.81
0.81
0.81
Dimensions (in.)
Overall Exposed
Hex
Length Length
Size
G
0.94
0.94
0.94
0.19
0.19
0.20
Largest Wt. (LB.)
Diameter P/Piece
Tube End Nipples*
Triple-Lok
PD — — BTX
A
B
A
B
Body
Size
(in.)
Part
No.
Steel
Tube
Size
1/8
1/8
PD34BTX
PD36BTX
1/4
3/8
Dimensions (in.)
Overall
Length
Exposed
Length
B
0.94
0.96
B
0.47
0.69
1/8
PD38BTX
1/2
A
1.64
1.66
A
1.17
1/8
PD312BTX
3/4
1.39
Wt. (LB.)
P/Piece
0.10
0.09
0.12
0.27
* Tube end nipples are designed to meet the performance standards of the tube
or hose fitting connection, which may or may not meet SAE J1502 Standards.
Ferulok
PD — — BTU
A
F Diagnostic
B
Body
Size
(in.)
Part
No.
Steel
Tube
Size
Dimensions (in.)
Overall
Length
Exposed
Length
Wt. (LB.)
P/Piece
1/8
PD38BTU
1/2
A
1.40
B
0.70
–
* Tube end nipples are designed to meet the performance standards of the tube
or hose fitting connection, which may or may not meet SAE J1502 Standards.
Seal-Lok
PD — — BTL
A
B
A
Body
Size
(in.)
Part
No.
Steel
Tube
Size
1/8
1/8
PD34BTL
PD36BTL
1/4
3/8
1/8
1/8
PD38BTL
PD310BTL
1/2
5/8
B
Dimensions (in.)
Overall
Length
Exposed
Length
A
2.18
2.30
A
1.12
1.16
B
1.48
1.60
B
0.42
0.46
Wt. (LB.)
P/Piece
0.12
0.14
0.13
0.19
* Tube end nipples are designed to meet the performance standards of the tube
or hose fitting connection, which may or may not meet SAE J1502 Standards.
Note: Add -6 to part number to include dust cap, for example PD343-6
F-20
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Test Port Couplings
Diagnostic Products
PDP Series
Applications
The PDP Series couplings provide easy connection for
mechanical gauges or specialized diagnostic equipment like
SensoControl.
Typically, PDP nipples are permanently mounted in the
system at threaded test ports, in rigid tubing or in hose
assemblies. PDP couplers are attached to test instruments.
Locking balls align the couplers to the mating nipples without
threading, so gauges, transducers and other test equipment
can be snapped into place without difficulty.
Parker's PDP Series couplings offer the advantages of PD
couplings, but are designed to connect easily and quickly
under full system pressure up to 6000 PSI (operating).
PDP couplers and nipples push to connect with a constant
force of only six pounds. Then the coupler base is turned to
open the valve and complete the connection. In the
connected position, the coupler base blocks the retracting
sleeve to prevent accidental disconnects.
Features
• Made to connect under pressure up to 6000 psi
• Grip-tight knurled sleeves help to make connecting and
disconnecting easy, even while wearing gloves.
• Nipples are machined from high tensile steel for strength to
withstand 6000 PSI continuous operating pressure.
Ordering information
• End connections include pipe, O-ring, 37º Flare and ORFS
Coupler/Nipple Material
• Durable Ball Valve Nipple.
Standard body material is steel.
• Coupler is unvalved to allow gauges and transducers to
return to zero when disconnected.
Optional Seals Suffix*
No suffix is required when ordering products with the
standard Nitrile seals. When specifying an optional seal,
refer to the following chart to determine the appropriate
suffix.**
Body Size
Description
1/8”
PDP Coupler PDP Nipple
Body Material (Steel)
Carbon
Steel
Rated Pressure (PSI)
—
Temperature Range (STD Seals) Nitrile
Assembly
High Tensile
Steel
—
6000
6000
-40°F to +250°F
Connect Force-Assembly
6 Lbs (0 PSI - 6000 PSI)
Disconnect Force-Assembly
7 Lbs (0 PSI - 6000 PSI)
Ethylene
Propylene
Fluorocarbon
PD Series
W
Y
Z
PDP Series
W
Y
Z
Coupling Series
Neoprene Perfluoroelastomer
*To select proper seal materials, see Fluid Compatibility Chart in Appendices
section, or contact your Parker Quick Coupling Distributor.
**N/A = Not Available; STD = Standard (No Suffix Needed)
Coupler (connect-under-pressure)
Female Thread
A
Body
Size
(in.)
Part
No.
Steel
Thread
Size
NPTF
Overall
Length
1/8
PDP242
1/4-18
A
2.15
C
Dimensions (in.)
Wrench
Largest Wt. (LB.)
Flats
Diameter P/Piece
B
0.81
C
0.96
–
B
PDP Series
DUST CAP
F-21
Body Size
(in.)
Dust Cap
Part No.
1/8
PD6-285
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
F Diagnostic
Specifications
Test Port Couplings
Diagnostic Products
EMA3 Series
Applications
EMA couplings provide easy diagnostic connections for
Parker SensoControl® equipment or mechanical gages. EMA
test points are typically permanently plumbed into a fluid
system at locations where pressure measurements are
required for maintenance or testing. Integral pressure cap
protects the test point from damage and prevents contamination of the fluid system. Proven twist-to-connect design
allows the test points to be connected even when the system
is in operation and the test points are pressurized. EMA’s
compact design and optional high pressure hose assemblies
allow extra flexibility for the location of system test points.
Features
• Knurled sleeve allows simple twist-to-connect operation
without the use of tools
• Rugged design allows connect-under-pressure operation
up to 5800 psi
• Maximum rated working pressure of 9000 psi exceeds the
requirements of most applications
Although designed primarily for diagnostic applications, EMA
fittings and hose assemblies are idea for a wide range of
applications that require compact high pressure connections
and limited flow rates.
• Integral threaded dust cap protects the test point from
damage and contamination
Specifications
• EMA fittings are machined from solid barstock and
protected with zinc plating and a chromium 6 free finish.
Body Size
Rated Pressure (PSI)
Max Connect-Under-Pressure (PSI)
Rated Flow (GPM)
Body Material
Seal Material (std.)
Temperature Range (std. seals)
• Stainless steel springs for corrosion resistance
• Elastomeric interface and valve seals provide leak free
operation
• Compact design and optional high pressure hose
assemblies provide flexibility for tight space requirements
D
Male Pipe Thread
C
A
B
1/8
9000 PSI
5800
0.8
Zinc Plated Steel
Nitrile/Fluorocarbon
-15° to +250° F
Part
No.
Port
Thread
Size
Hex
Size
(mm)
Interface
Thread
Size
Overall
Length
Wt. (LB.)
P/Piece
EMA3/1/8NPT
EMA3/1/4NPT
EMA3/1/4NPT71
A
1/8-27NPT
1/4-18NPT
1/4-18NPT
B
17
17
17
C
M16X2.0
M16X2.0
M16X2.0
D
1.81
1.98
1.95
0.15
0.16
0.16
Interface
Thread
size
Overall
Length
Wt. (LB.)
P/Piece
D
SAE Straight Thread
C
A
Part
No.
Port
Thread
Size
Hex
Size
(mm)
A
EMA3/7/16-20UNF-2A* 7/16-20UNF-2A
EMA3/9/16-18UNF-2A* 9/16-18UNF-2A
B
B
C
D
17
19
M16X2.0
M16X2.0
1.88
1.88
0.15
0.17
* O-Ring seal on port
Metric Straight Thread
D
C
Part
No.
Port
Thread
Size
Hex
Size
(mm)
Interface
Thread
Size
Overall
Length
Wt. (LB.)
P/Piece
EMA3/M8X1OR*
EMA3/10X1ED**
EMA3/12X1.5ED**
EMA3/14X1.5ED**
A
M8X1
M10X1
M12X1.5
M14X1.5
B
17
17
17
19
C
M16X2.0
M16X2.0
M16X2.0
M16X2.0
D
1.81
1.85
1.94
1.94
0.15
0.15
0.16
0.16
Part
No.
Port
Thread
Size
Hex
Size
(mm)
Interface
Thread
Size
Overall
Length
Wt. (LB.)
P/Piece
EMA3/1/8ED**
EMA3/1/4ED**
EMA3/3/8ED**
A
1/8 BSPP
1/4 BSPP
3/8 BSPP
B
19
19
21
C
M16X2.0
M16X2.0
M16X2.0
D
1.77
1.94
1.94
0.15
0.16
0.16
A
B
* O-Ring seal on port
** Molded seal on port
British Parallel Pipe
D
C
A
B
** Molded seal on port
F-23
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
F Diagnostic
Stainless Steel
Test Port Couplings
Diagnostic Products
PDP Series
Nipples*
(connect-under-pressure)
Male Pipe
Body
Size
(in.)
Part
No.
Steel
Thread
Size
NPTF
Overall
Length
1/8
1/8
PDP323
PDP343
1/8-27
1/4-18
D
2.02
1.48
Body
Size
(in.)
Part
No.
Steel
Thread
Size
ORB
Overall
Length
1/8
1/8
PDP341
PDP361
7/16-20
9/16-18
D
2.06
1.48
Dimensions (in.)
Exposed
Hex
Length
Size
E
1.46
0.93
F
0.69
0.69
Largest
Diameter
Wt. (LB.)
P/Piece
G
0.79
0.79
0.26
0.12
Largest
Diameter
Wt. (LB.)
P/Piece
G
0.79
0.79
0.12
0.07
Largest
Diameter
Wt. (LB.)
P/Piece
G
.80
.80
–
–
Largest
Diameter
Wt. (LB.)
P/Piece
G
.80
.94
–
–
D
E
G
F
Straight Thread
D
E
G
Dimensions (in.)
Exposed
Hex
Length
Size
E
1.50
0.93
F
0.69
0.69
*Add -6 to part number to include dust cap.
F
Triple-Lok
D
E
Body
Size
(in.)
Part
No.
Steel
Tube
Size
Overall
Length
1/8
1/8
PDP34BTX
PDP36BTX
1/4
3/8
D
2.11
2.13
Body
Size
(in.)
Part
No.
Steel
Tube
Size
Overall
Length
1/8
1/8
PDP34BTL
PDP36BTL
1/4
3/8
D
2.65
2.77
Dimensions (in.)
Exposed
Hex
Length
Size
E
1.55
1.57
F
0.69
0.69
F Diagnostic
G
F
Seal-Lok
D
E
Dimensions (in.)
Exposed
Hex
Length
Size
E
2.09
2.21
F
.69
.81
G
F
F-22
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Test Port Couplings
Diagnostic Products
EMA3 Series
EMA Gauge Adapter
Part
No.
Port
Thread
Size
Hex
Size
(mm)
Port
Thread
Size
MAV1/4NPT-MA3
MAV1/4NPT-MA3-KM
A
1/4-18NPT
1/4-18NPT
B
19
19
C
M16X2.0
M16X2.0
Part
No.
Port
Thread
Size
Hex
Size
(mm)
Port
Thread
Size
MAVMD1/4NPT-MA3
A
1/4-18NPT
B
19
C
M16X2.0
Part
No.
Port
Thread
Size
Hex
Size
(mm)
Port
Thread
Size
EMA3VS
A
M16X2.0
B
17
C
M16X2.0
Overall Wt. (LB.)
Length P/Piece
D
2.22
2.22
0.16
0.23
Includes Dust Cap
D
A
C
B
Overall Wt. (LB.)
Length P/Piece
D
2.22
0.18
Union
D
A
C
Overall Wt. (LB.)
Length P/Piece
D
1.65
0.11
F Diagnostic
B
F-24
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Test Port Couplings
Diagnostic Products
Transducer Adapters
Transducer Adapters 1/2-14BSPP Thread*
Part
No.
Overall
Length
Hex
Size
Largest
Diameter
Port
Thread
Size
Interface
Thread
Size
Wt. (LB.)
P/Piece
PD288
A
2.52
B
1.19
C
1.38
D
1/2-14BSPP
E
–
0.35
Part
No.
Overall
Length
Hex
Size
Largest
Diameter
Port
Thread
Size
Interface
Thread
Size
Wt. (LB.)
P/Piece
PDP288
A
2.58
B
1.19
C
1.38
D
1/2-14BSPP
Part
No.
Overall
Length
Hex
Size
Metric
Largest
Diameter
SCA-1/2-EMA-3
A
2.07
B
27mm
–
–
Overall
LengthSize
Hex
Size
Metric
Largest
Diameter
A
2.07
B
27mm
–
–
A
C
D
B
A
C
D
B
A
B
E
D
Port
Thread
Size
E
–
0.35
Interface
Thread
Size
Wt. (LB.)
P/Piece
D
E
1/2-14BSPP M16X2.0
0.30
A
B
E
Part
No.
D
SCA-1/2-EMA-3-S
Port
Thread
Size
Interface
Thread
Size
D
E
1/2-14BSPP M16X2.0
Wt. (LB.)
P/Piece
0.30
Flexible Hose
LENGTH
A
A
Part No.
Length
(in.)
Length
(mm)
Thread Size
A
SMA3-200
7.90
200
M16x2.0
SMA3-400
15.75
400
M16x2.0
SMA3-800
31.50
800
M16x2.0
SMA3-2000
78.75
2000
M16x2.0
SMA3-4000
157.50
4000
M16x2.0
Note: Other lengths available upon request.
Maximum pressure rating for test hose is 9000 psi.
F-25
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
F Diagnostic
* Note: For old style M22X1.5 thread contact the division
Test Port Couplings
Diagnostic Products
Fluid Sampling
Features
These diagnostic fluid sampling products are designed to
provide an easy access point for obtaining fluid samples. A
permanently mounted test point eliminates the need to shut
down or break lines when taking samples and reduces the
chances of contamination. Fluid analysis is crucial in both
engines and hydraulic systems as it can reveal problems with
filtration and other internal components. Early detection can
prevent costly repairs, unscheduled maintenance and
production downtime. These fluid sampling nipples should be
installed in either low pressure or return lines. For the most
accurate monitoring, fluid samples should be constantly taken
from the same location.
Specifications
Body Size (in.)
Rated Pressure (psi)
Temperature Range (std seals: Fluorocarbon)
Seal material
1/8
500
-40° to +250°F
Fluorocarbon
Couplers
Female Thread
A
Body
Size
(in.)
Part
No.
Female
Thread
NPTF
Female
Thread
ORB
1/8
PDFS242
1/4-18
–
Dimensions (in.)
Overall Wrench Largest Wt. (LB.)
Length Flats Diameter P/Piece
C
A
2.15
B
0.81
C
0.96
0.25
B
Nipples
Male Straight Thread
D
Body
Size
(in.)
E
Part
No.
Thread
Thread
Size
Size
ORB or NPTF METRIC
Dimensions (in.)
Overall Exposed Hex Largest Wt. (LB.)
Length Length Size Diameter P/Piece
F Diagnostic
G
F
Male Pipe Thread
D
E
G
F
Metric Thread
D
1/8
BPDFS341 7/16-20 ORB
1.60
1/8
BPDFS343 1/4-18 NPTF
1.48
1/8
BPDFS357
M10 x 1.0 1.80
1/8 PDFS-PROBE*
NA
–
1/8 PROBE HOLDER
E
F
G
0.90
0.78
1.10
–
0.69
0.69
0.69
–
0.79
0.79
0.79
–
0.08
0.06
0.17
–
Fluorocarbon seal is standard.
D
Dust Cap PD6-285 is recommended.
E
* Reuseable PROBE HOLDER must be used with PDFS-PROBE
G
F
Sampling Kits
Note: When you purchase either of the sampling kits, you
receive the PAR-Test™-complete laboratory analysis included
in the initial cost. This includes particle count, viscosity, water
content and spectra chemical analysis of over 20 wear metals
and additives.
Body
Size (in.)
1/8
1/8
F-26
Part No.
Description
PDFS-TEST
Sampling Kit
PDFS-TEST-P* Sampling Kit W/Probe
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
Ordering Information
Diagnostic Products
When ordering Parker coupler bodies and nipples, please
state the part number of each type of coupler body and each
type of nipple desired. List coupler bodies and nipples as
separate items rather than in combinations. Be sure to double
check thread or hose sizes of items required.
Coupler/Nipple Material
• Prefix “B” for Brass body
• Prefix “SS” for Stainless Steel body
• Standard body material is Steel
Many of Parker’s coupling products are available with unique
non-standard options well suited to very specific applications.
Examples of unusual end use applications might include:
high temperatures (above 250° F), extremely
caustic/corrosive solutions passing through the coupling,
external/environmental corrosion situations, or other high
wear and tear situations such as dragging the product along
the ground. Please see the Fluid Compatibility Chart at the
end of the catalog for a guide in selecting material for various
media. It is always recommended that the Quick Coupling
Division be contacted with any questions concerning specific
product application needs.
Optional Seals Suffix*
No suffix is required when ordering products with the
standard Nitrile seals. When specifying an optional seal,
refer to the following chart to determine the appropriate
suffix.**
Typically, a prefix or suffix is added to the base part number to
specify a non-standard O-ring seal, or special option. The
Optional Seals Suffix chart illustrates the designations.
Please Note: Certain couplings series have additional
"Special Order Information" which should be referred to in
ordering those products. If applicable to the product, "Special
Order Information" is found next to the Features and
Specifications charts.
Ethylene
Propylene
Fluorocarbon
PD Series
W
Y
Z
PDP Series
W
Y
Z
Coupling Series
Neoprene Perfluoroelastomer
*To select proper seal materials, see Fluid Compatibility Chart in Appendices
section, or contact your Parker Quick Coupling Distributor.
**N/A = Not Available; STD = Standard (No Suffix Needed)
Diagnostic Products
Valving
Body
Size
Flush Face
1/8"
Material*
Locking
Br SS S P Mechanism
Std. Seal
Material
Temp
Range**
Rated
Pressure
-40° to +250° F
6000 PSI
Test Port
PD Series
PDP Series
EMA3 Series
Ball
1/8"
Poppet
1/8"
• • •
•
• •
Ball
Nitrile
Ball
Nitrile
-40° to +250° F
6000 PSI
Threads
Nitrile/Fluorocarbon
-15° to +250° F
9000 PSI
* See Fluid Compatibility chart and/or consult factory for questions regarding proper material for specific applications.
CODE: Br = Brass; SS = Stainless Steel; S = Steel; P = Plastic
**Temperature Range for standard seal material.
Note: See the Specifications Table for PD and PDP Series for more information.
SensoControl® diagnostic product’s technical information subject to change.
F-27
Quick Coupling Division
8145 Lewis Road • Minneapolis, MN 55427
www.parker.com/quickcouplings
F Diagnostic
Test Port Coupling-Selection Guide
Appendices
Appendices
1
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Fluid Compatibility Chart
PF Series (Plastic/Polypropylene Material)
Appendices
Ratings Code:
–
–
P
—
#
–
–
–
Good to excellent. Little or no swelling, tensile or surface changes. Preferred choice.
Marginal or conditional. Noticeable effects but not necessarily indicating lack of serviceability. Further testing suggested for
specific application. Very long-term effects such as stiffening or potential for crazing should be evaluated.
Poor or unsatisfactory. Not recommended without extensive and realistic testing.
Indicates that this was not tested.
For Teflon. Indicates good chemical resistance but potential for excessive permeation.
MEDIA
Acetaldehyde
Acetates
Acetic Acid
Acetic Anhydride
Acetone
Acetyl Bromide
Acetyl Chloride
Air
Alcohols
Aluminum Salts
Ammonia
Amyl Acetate
Aniline
Animal Oils
Arsenic Salts
Aromatic Hydrocarbons
Barium Salts
Benzaldehyde
Benzene (Benzol)
Benzyl Alcohol
Bleaching Liquors
Boric Acid Solution
Bromine
Butane
Butanol
Butyl Acetate
Calcium Salts
Carbon Dioxide
Carbon Disulfide
Carbon Tetrachloride
Caustic Potash
Caustic Soda
Chloracetic Acid
Chlorine (Dry)
Chlorine (Wet)
Chlorobenzene
Chloroform
Chromic Acid
Copper Salts
Cresol
Cyclohexanone
Ethers
Ethyl Acetate
Ethyl Alcohol
Ethylamine
Ethyl Bromide
Ethyl Chloride
Fatty Acids
Ferric Salts
Formaldehyde
Formic Acid
Freon
Gasoline
Polypropylene
MEDIA
P
L
G
L
G
–
L
G
L
G
G
L
G
G
L
–
G
L
L
G
–
G
P
L
–
P
G
G
L
P
G
G
L
P
P
P
P
G
G
L
L
P
L
G
L
–
P
G
G
G
G
L
L
Glucose
Glycerine
Hydriodic Acid
Hydrochloric Acid (Conc.)
Hydrochloric Acid (Med. Conc.)
Hydrofluoric Acid
Hydrogen Peroxide (Conc.)
Hydrogen Peroxide (Dil.)
Hydrogen Sulfide
Iodine
KeroseneP
Ketones
Lacquer Solvent
Lactic Acid
Lead Acetate
Linseed Oil
Magnesium Salts
Naphtha L
Natural Gas
Nickel Salts
Nitric Acid (Conc.)
Nitric Acid (Dil.)
Nitrobenzene
Nitrogen Oxides
Nitrous Acid
Oils (Animal and Mineral)
Oils (Vegetable)
Oxygen
Perchloric Acid
Phenol
Potassium Salts
Pyridine
Silver Nitrate
Soap Solutions
Sodium Salts
Stearic Acid
Sulfur Chloride
Sulfuric Acid (Conc.)
Sulfuric Acid (Dil.)
Sulfurous Acid
Tannic Acid
Tanning Extracts
Titanium Salts
Toluene (Toluol)
Trichloracetic Acid
Trichlorethylene
Turpentine
Urea
Uric Acid
Water
Xylene (Xylol)
Zinc Chloride
I-1
Polypropylene
G
G
–
G
G
G
L
L
G
G
G
L
G
G
G
G
L
L
G
P
L
G
–
G
L
L
L
L
G
G
G
G
G
G
L
P
L
G
L
G
L
–
P
G
P
P
G
–
G
P
G
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Appendices
G
L
Fluid Compatibility Chart
Appendices
Codes
Note
The following seal compound and body material compatibility
chart is provided as an aid in selecting a specific synthetic
rubber compound or body material for a particular application.
Operating and environmental conditions must be considered
when making the selection of a quick coupling.
This chart is intended as a guide only and is not be
considered as a recommendation to use Parker quick action
couplings in a specific application or with a specific fluid, other
factors that must be considered include but are not limited to:
fluid and ambient temperature, system pressure, both
operating and peak, frequency of connect and disconnect,
and applicable standards or regulations.
Refer to the appropriate section of the catalog for Ordering
Information for Seal Codes for specific products.
To indicate a special material just add the appropriate code
letter as a suffix to the catalog number of the coupler. It is
not necessary to use the code “STD” as the standard Nitrile
seal will be used when another code is not used.
For recommendations for media not listed below, please
contact your Parker representative or the factory.
CODES: 1 = Satisfactory
2 = Fair
3 = Not Recommended
4 = Insufficient Data Available
BODY MATERIAL
Appendices
MEDIA
3M FC-75
ACETAMIDE
ACETIC ACID (5%)
ACETONE
ACETOPHENONE
ACETYL ACETONE
ACETYL CHLORIDE
ACETYLENE
AIR (200 DEGREES F.)
AIR (300 DEGREES F.)
AIR (400 DEGREES F.)
ALUMINUM ACETATE
ALUMINUM BROMIDE
ALUMINUM CHLORIDE (10%)
ALUMINUM CHLORIDE (100%)
ALUMINUM FLOURIDE
ALUMINUM NITRATE
ALUMINUM SALTS
ALUMINUM SULPHATE
ALUMS (NH3,Cr,K)
AMMONIA (ANHYDROUS)
AMMONIA (COLD, GAS)
AMMONIA (HOT, GAS)
AMMONIUM CARBONATE
AMMONIUM CHLORIDE
AMMONIUM HYDROXIDE
AMMONIUM NITRATE
AMMONIUM PERSULFATE SOLUTION
AMMONIUM PHOSPHATE (MONO-, DI-, TRI-BASIC)
AMMONIUM SALTS
AMMONIUM SULFATE
AMYL BORATE
AMYL CHLORIDE
AMYL CHLORONAPHTHALENE
AMYL NAPHTHALENE
ANIMAL OIL (LARD OIL)
AROCLOR 1248
AROCLOR 1254
AROCLOR 1260
SEAL MATERIAL
Brass
Steel
316 S.S.
303 S.S.
Nitrile
4
4
3
1
2
2
4
3
1
1
1
4
4
3
3
3
3
4
2
4
3
3
3
3
3
3
3
3
3
4
3
4
4
4
4
2
2
2
2
4
4
3
2
2
2
2
2
2
2
2
4
4
3
2
3
3
4
3
4
2
2
2
2
3
3
3
3
3
4
3
4
2
4
4
2
3
3
3
4
1
1
1
2
2
2
1
1
1
1
4
4
3
2
3
2
4
2
4
1
4
4
3
2
1
1
1
3
4
2
4
1
4
4
2
3
3
3
4
2
1
1
1
2
2
1
1
1
1
4
4
3
2
3
2
4
3
4
1
1
1
3
3
2
1
2
2
4
3
4
1
4
4
2
3
3
3
1
1
2
3
3
3
3
1
1
2
3
2
1
1
1
1
1
1
1
1
2
1
3
3
1
3
1
3
1
1
1
1
4
3
3
1
3
3
1
I-2
E.P. Fluorocarbon Neoprene
1
1
1
1
1
1
3
1
1
2
3
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
3
3
3
3
2
2
2
4
2
3
1
3
3
3
1
1
1
1
1
3
1
1
1
1
1
1
1
3
3
3
3
1
1
3
4
4
4
3
3
1
1
1
1
1
1
1
1
1
1
1
3
3
3
3
2
1
2
3
2
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
4
1
1
1
1
3
3
3
2
3
3
1
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Fluid Compatibility Chart
CODES: 1 = Satisfactory
2 = Fair
3 = Not Recommended
4 = Insufficient Data Available
BODY MATERIAL
MEDIA
AROMATIC FUEL - 50%
ARSENIC ACID
ASPHALT
ASTM OIL, NO. 1
ASTM OIL, NO. 2
ASTM OIL, NO. 3
ASTM OIL, NO. 4
ASTM REFERENCE FUEL A
ASTM REFERENCE FUEL B
ASTM REFERENCE FUEL C
AUTOMOTIVE BRAKE FLUID
BARIUM CHLORIDE
BARIUM HYDROXIDE
BARIUM SALTS
BARIUM SULFIDE
BEER
BEET SUGAR LIQUORS
BENZALDEHYDE
BENZENE
BENZENESULFONIC ACID (10%)
BENZINE
BENZOIC ACID
BENZYL ALCOHOL
BENZYL CHLORIDE
BLEACH LIQUOR
BORAX
BORDEAUX MIXTURE
BORIC ACID
BRAKE FLUID (NON-PETROLEUM)
BRINE (SODIUM CHLORIDE)
BROMINE
BROMINE WATER
BUNKER OIL
BUTADIENE (MONOMER)
BUTANE
BUTANE (2,2, & 2,3-DIMETHYL)
BUTANOL (BUTYL ALCOHOL)
BUTTER - ANIMAL FAT
BUTYL BUTYRATE
BUTYL STEARATE
CALCINE LIQUORS
CALCIUM ACETATE
CALCIUM BISULFITE
CALCIUM CARBONATE
CALCIUM CHLORIDE
CALCIUM HYDROXIDE
CALCIUM HYPOCHLORITE
CALCIUM SALTS
CALCIUM SULFIDE
CALICHE LIQUORS
CANE SUGAR LIQUORS
CARBON BISULPHIDE
CARBON DIOXIDE
CARBON DISULFIDE
CARBON MONOXIDE
CARBON TETRACHLORIDE
CARBONIC ACID
CASTOR OIL
CELLUGUARD
CELLULUBE (NOW FYRQUEL)
CHINA WOOD OIL (TUNG OIL)
CHLORINATED SALT BRINE
CHLORINATED SOLVENTS
CHLOROBENZENE
CHLOROBUTADIENE
CHLOROFORM
SEAL MATERIAL
Brass
Steel
316 S.S.
303 S.S.
Nitrile
4
3
3
1
1
1
1
3
3
3
4
3
3
4
3
3
3
3
3
3
4
3
4
3
4
3
4
3
4
3
4
4
4
3
3
4
2
2
4
4
4
4
3
3
3
3
3
4
3
4
4
4
1
2
1
2
3
1
4
4
2
4
4
3
4
3
4
3
3
1
1
1
1
2
2
2
4
3
2
4
2
3
3
3
2
3
4
3
3
3
4
2
4
3
4
3
4
4
4
2
1
4
1
3
4
4
4
4
3
2
3
3
3
4
3
4
2
4
2
2
1
3
3
1
4
4
2
4
4
3
4
2
4
1
1
1
1
1
1
1
1
1
4
2
2
4
3
1
1
2
3
3
4
3
1
2
4
3
4
2
4
1
4
4
4
1
1
4
1
1
4
4
4
4
2
3
2
2
2
4
2
4
1
4
1
2
1
1
1
1
4
4
1
4
4
2
4
2
4
1
1
1
1
1
1
1
1
1
4
3
3
4
3
1
1
3
3
3
4
3
2
3
4
3
4
3
4
1
4
4
4
2
1
4
1
2
4
4
4
4
3
2
3
3
3
4
2
4
1
4
1
2
1
3
2
1
4
4
1
4
4
3
4
1
2
1
2
1
1
1
2
1
1
2
3
1
1
1
1
1
1
3
3
3
1
3
3
3
3
2
2
1
3
1
3
3
1
3
1
1
1
1
3
2
1
2
2
1
1
1
2
1
1
1
1
3
1
3
1
2
2
1
1
3
1
3
3
3
3
3
I-3
E.P. Fluorocarbon Neoprene
3
1
3
3
3
3
3
3
3
3
1
1
1
1
1
1
1
1
3
3
3
3
2
3
1
1
1
1
1
1
3
2
3
3
3
3
2
1
1
3
1
1
1
1
1
1
1
1
1
1
1
3
1
3
1
3
1
2
1
1
3
3
3
3
3
3
1
1
1
1
1
1
1
1
1
1
3
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
3
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
2
1
2
3
3
2
3
3
2
1
1
1
1
1
2
3
3
2
2
3
2
3
2
3
2
1
2
1
3
3
3
3
1
2
1
2
3
3
4
2
2
1
1
1
2
1
1
1
1
3
1
3
2
3
1
1
1
3
2
3
3
3
3
3
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Appendices
Appendices
Fluid Compatibility Chart
Appendices
CODES: 1 = Satisfactory
2 = Fair
3 = Not Recommended
4 = Insufficient Data Available
BODY MATERIAL
Appendices
MEDIA
CHLORPHENOL
COCOANUT OIL
COPPER CHLORIDE
COPPER SALTS
COPPER SULFATE
CORN OIL
COTTONSEED OIL
CREOSOLS
CREOSOTE
CRESYLIC ACID
CRUDE OIL
CUTTING OIL
DECANE
DENATURED ALCOHOL
DETERGENT, WATER SOLUTION
DIESEL FUEL
DIETHYLENE GLYCOL
DIMETHYL FORMAMIDE
DOW CHEMICAL HD50-4
DOW CORNING 200, 510, 550
DOWTHERM A,E
ETHANOL
ETHYL CHLORIDE
ETHYL HEXANOL
ETHYLENE DICHLORIDE
ETHYLENE GLYCOL
FATTY ACIDS
FREON 11
FREON 12
FREON 22
FREON 134a
FUEL OIL
GALLIC ACID
GAS, LIQUID, PROPANE (LPG)
GAS, NATURAL
GASOLINE
GELATIN
GLUCOSE
GLYCERINE (GLYCEROL)
GLYCOLS
GREEN SULFATE LIQUOR
GULF - FR FLUID (EMULSION)
GULF - FR FLUID G
GULF - FR FLUID P
HELIUM
HEPTANE
HYDRAULIC OIL (PETROLEUM BASE)
HYDRAULIC OIL (WATER BASE)
HYDRAZINE
HYDROGEN GAS
HYDROLUBE
ISO OCTANE
ISOBUTYL ALCOHOL
ISOPROPYL ALCOHOL
ISOPROPYL ETHER
JP3 AND JP4
KEROSENE
LARD, ANIMAL FAT
LINSEED OIL
LUBRICATING OIL SAE 10, 20, 30, 40, 50
MAGNESIUM SALTS
MAGNESIUM SULPHATE
MERCURY
METHANE
METHANOL
METHYL BROMIDE
SEAL MATERIAL
Brass
Steel
316 S.S.
303 S.S.
Nitrile
4
4
4
4
3
2
3
3
3
4
3
4
4
4
3
1
3
4
4
4
3
1
2
4
3
2
3
1
1
1
1
3
3
1
2
1
3
1
2
3
3
4
4
4
1
1
1
4
4
2
4
1
4
1
1
1
1
1
3
1
4
3
3
1
1
4
4
4
4
4
3
1
2
2
3
2
2
1
4
4
3
1
1
4
4
4
1
3
3
4
3
2
3
4
1
3
1
1
3
3
3
2
3
1
1
2
3
4
4
4
1
1
1
1
3
2
4
1
4
1
1
1
1
1
1
1
4
3
3
3
1
1
4
4
4
4
2
1
1
1
2
1
1
1
4
4
1
1
1
1
4
4
2
3
1
4
1
1
1
4
3
1
1
1
2
1
1
1
1
1
1
2
3
4
4
4
1
1
1
1
1
1
4
1
1
2
1
1
1
1
1
1
4
2
1
1
1
1
4
4
4
4
3
1
2
2
1
2
1
1
4
4
1
1
1
1
4
4
2
3
3
4
2
2
2
4
1
1
1
1
2
1
1
1
1
1
1
2
3
4
4
4
1
1
1
1
1
1
4
1
1
1
1
1
1
1
1
1
4
2
1
1
1
1
3
1
1
1
1
1
1
3
1
3
2
1
1
1
1
1
1
2
4
2
3
3
1
1
3
1
2
2
2
3
2
1
2
1
1
3
1
1
1
1
2
1
1
3
1
1
1
2
2
1
1
1
2
2
2
1
1
1
1
1
1
1
1
1
1
2
I-4
E.P. Fluorocarbon Neoprene
3
3
1
1
1
3
3
3
3
3
3
3
3
1
1
3
1
1
1
1
3
1
3
1
3
1
3
3
3
3
1
3
2
3
3
3
1
1
1
1
1
3
1
2
1
3
3
1
1
1
1
3
1
1
3
3
3
2
3
3
1
1
1
3
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
3
1
1
3
1
1
1
1
1
2
1
3
4
1
1
1
1
1
1
1
1
3
1
1
1
2
1
1
1
3
3
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
3
1
3
3
2
1
1
3
3
3
2
3
3
2
3
1
2
3
1
3
2
1
3
1
3
1
3
1
2
3
1
1
1
2
2
2
1
3
1
1
1
1
2
2
1
3
1
2
1
2
2
1
2
2
1
2
3
3
2
2
3
2
1
1
1
2
1
3
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Fluid Compatibility Chart
Appendices
2 = Fair
3 = Not Recommended
4 = Insufficient Data Available
BODY MATERIAL
MEDIA
METHYL CHLORIDE (DRY)
METHYL CHLORIDE (WET)
METHYL ETHER
METHYL ETHYL KETONE (MEK)
MIL-F-81912 (JP-9)
MIL-H-5606
MIL-H-6083
MIL-H-7083
MIL-H-8446 (MLO-8515)
MIL-L-2104 & 2104B
MIL-L-7808
MILK
MINERAL OILS
MLO-7277 AND MLO-7557
MOBILE HF
MONOMETHYL HYDRAZINE
NAPHTHA (COAL OR PETROLEUM)
NAPHTHALENE
NAPHTHENIC ACID
NEATSFOOT OIL
NICKEL, ACETATE
NICKEL CHLORIDE
NICKEL SALTS
NICKEL SULFATE
NITROGEN
NITROUS OXIDE
OCTYL ALCOHOL
OLIVE OIL
ORTHO-DICHLOROBENZENE
OXALIC ACID
OXYGEN (200-400 DEGREES F.)
OXYGEN, COLD
OZONE
PALMITIC ACID
PARA-DICHLOROBENZENE
PARKER O LUBE
PEANUT OIL
PENTANE (2-3-METHYL, & 2-4 DIMETHYL)
PERCHLORIC ACID -2N
PERCHLOROETHYLENE
PETROLATUM
PETROLEUM OIL, BELOW 250 DEGREES F.
PHENOL
PHOSPHORIC ACID (3 MOLAR)
PHOSPHORIC ACID (CONCENTRATED)
PHOSPHOROUS TRICHLORIDE
PICRIC ACID, MOLTEN
PICRIC ACID, WATER SOLUTION
PINE OIL
PLATING SOLUTIONS (CHROME)
PLATING SOLUTIONS (OTHER)
PNEUMATIC SERVICE
POTASSIUM ACETATE
POTASSIUM CHLORIDE
POTASSIUM CYANIDE
POTASSIUM DICHROMATE
POTASSIUM HYDROXIDE (50%)
POTASSIUM NITRATE
POTASSIUM SALTS
POTASSIUM SULFATE
PRL-HIGH TEMP. HYDR. OIL
PRODUCER GAS
PROPANE
PROPYL ACETATE
PROPYL ALCOHOL
PROPYLENE
SEAL MATERIAL
Brass
Steel
316 S.S.
303 S.S.
Nitrile
2
1
4
1
1
1
1
1
2
1
3
2
1
2
1
4
2
2
2
4
3
3
4
3
1
2
1
2
2
3
1
1
3
1
2
1
2
2
3
3
1
1
1
3
3
3
3
3
2
1
4
1
2
3
3
3
3
2
4
3
4
2
1
3
1
1
3
3
4
1
1
1
1
1
1
1
2
1
1
1
1
4
1
1
1
4
2
3
4
3
1
2
1
1
2
3
1
1
3
2
1
1
1
2
3
2
1
1
1
3
3
3
3
3
2
3
1
1
1
3
2
1
2
1
4
2
4
1
3
1
1
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
4
2
2
2
4
1
2
4
1
1
2
1
1
2
2
1
1
1
1
1
1
1
2
2
2
1
1
1
2
2
1
2
2
1
1
1
1
2
1
2
2
1
1
4
1
4
1
1
1
1
1
1
3
4
1
1
1
1
1
1
1
1
1
1
1
1
4
2
2
2
4
1
2
4
1
1
1
1
1
2
1
1
1
1
1
2
1
1
2
2
2
1
1
1
2
2
1
2
2
2
1
1
1
2
2
2
2
2
1
4
1
4
1
1
1
1
1
3
3
1
3
3
1
1
1
2
1
2
1
1
3
1
2
2
3
2
1
2
1
1
1
1
1
2
1
3
2
3
2
3
1
3
1
1
1
3
2
1
1
3
1
3
3
2
1
1
4
1
1
2
1
1
1
2
1
1
1
2
1
1
3
1
3
I-5
E.P. Fluorocarbon Neoprene
3
3
3
1
3
3
3
1
3
3
3
1
3
3
3
1
3
3
3
2
1
1
1
1
1
4
3
2
3
1
3
1
1
2
3
3
3
3
2
3
3
3
3
1
1
1
2
1
3
1
1
1
1
1
1
1
1
1
1
1
3
3
3
2
1
3
1
1
1
3
1
1
1
2
1
1
1
1
1
1
1
4
1
1
1
1
3
1
1
1
1
4
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
3
1
1
1
1
1
1
3
1
1
3
3
3
3
3
2
1
2
1
2
3
1
2
3
2
2
3
3
3
3
2
2
2
1
1
4
2
2
3
2
3
1
3
2
3
1
3
2
2
3
2
2
3
2
3
3
2
1
3
3
3
1
2
1
1
1
2
1
1
1
2
2
2
3
1
3
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Appendices
CODES: 1 = Satisfactory
Fluid Compatibility Chart
Appendices
CODES: 1 = Satisfactory
2 = Fair
3 = Not Recommended
4 = Insufficient Data Available
BODY MATERIAL
Appendices
MEDIA
PYDRAUL 10E
PYDRAUL A-200, C SERIES
PYDRAUL, 3 SERIES
PYROGARD 42, 43, 53, 55 (PHOSPHATE ESTER)
PYROGARD D
SEA WATER (SALT WATER)
SHELL IRUS 905
SILICONE GREASES
SILVER NITRATE
SKYDROL 500, TYPE 2
SKYDROL 7000, TYPE 2
SOAP SOLUTIONS
SODIUM ACETATE
SODIUM BICARBONATE (BAKING SODA)
SODIUM BISULPHATE OR BISULPHITE
SODIUM BORATE
SODIUM CARBONATE (SODA ASH)
SODIUM CHLORIDE
SODIUM CYANIDE
SODIUM HYDROXIDE (CAUSTIC SODA, LYE)
SODIUM HYDROXIDE, 50%
SODIUM METAPHOSPHATE
SODIUM NITRATE
SODIUM PERBORATE
SODIUM PEROXIDE
SODIUM PHOSPHATES
SODIUM SALTS
SODIUM SULFATE
SODIUM SULFIDE AND SULFITE
SODIUM THIOSULFATE
SOYBEAN OIL
STANNOUS CHLORIDE (15%)
STEAM, BELOW 400 DEGEEES F.
STODDARD SOLVENT
SUCROSE SOLUTIONS
SULFUR
SULFUR LIQUORS
SULFUR (MOLTEN)
SULFUR DIOXIDE (DRY)
SULFUR TRIOXIDE (DRY)
SUNSAFE
TANNIC ACID (10%)
TAR, BITUMINOUS
TARTARIC ACID
TERPINEOL
TERTIARY BUTYL ALCOHOL
TETRACHLOROETHANE
TETRACHLOROETHYLENE
TETRAETHYL LEAD
TETRAETHYL LEAD (BLEND)
TITANIUM TETRACHLORIDE
TOLUENE
TRANSFORMER OIL
TRANSMISSION FLUID (TYPE A)
TRICHLOROETHANE
TRICHLOROETHYLENE
TRICRESYL PHOSPHATE
TURBINE OIL #15 (MIL-L-7808A)
TURPENTINE
VARNISH
WATER
WHISKEY
WINE
WOOD OIL
XYLENE
ZINC SULFATE
SEAL MATERIAL
Brass
Steel
316 S.S.
303 S.S.
Nitrile
3
3
3
4
4
2
4
1
3
3
3
3
1
2
3
3
4
3
3
3
3
2
3
3
3
1
4
3
3
3
2
3
1
2
1
2
1
3
3
2
3
1
2
2
4
1
4
3
1
1
2
1
1
1
4
3
4
4
3
1
1
1
1
4
1
3
1
1
1
4
4
3
4
1
3
1
1
3
1
2
3
2
1
2
1
2
3
1
2
3
1
3
4
2
3
3
1
3
3
1
1
1
1
3
1
2
1
3
1
3
4
1
2
2
1
1
1
1
1
1
2
2
1
2
2
1
3
3
3
2
2
3
1
1
1
4
4
1
4
1
1
1
1
1
1
1
2
2
1
2
1
1
1
2
1
1
2
2
4
1
2
1
1
2
1
1
1
1
1
1
1
2
1
2
1
3
4
1
1
2
1
1
2
1
1
1
1
2
2
1
1
1
1
1
1
1
1
2
1
1
1
4
4
1
4
1
2
1
1
1
1
1
1
2
1
2
1
2
2
2
1
1
2
1
4
1
3
2
1
3
1
1
1
1
1
1
3
3
1
3
1
2
4
1
2
4
1
1
3
1
1
1
4
2
2
1
1
1
1
1
1
1
1
2
3
3
3
3
1
1
1
1
2
3
3
1
2
1
1
1
1
1
1
2
2
1
2
2
2
1
1
1
1
2
1
1
3
1
1
3
2
3
3
3
1
1
2
1
2
2
3
3
2
2
2
3
1
1
3
3
3
2
1
2
1
1
1
1
3
1
E.P. Fluorocarbon Neoprene
1
3
1
1
3
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1*
3
1
1
2
3
1
2
3
1
3
2
3
2
3
3
3
3
3
3
3
3
3
3
1
3
3
3
1
1
1
3
3
1
3
1
1
1
3
1
1
1
1
3
2
1
3
1
1
1
1
1
4
2
2
1
4
1
1
1
1
1
1
1
1
1
3
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
2
1
1
1
1
1
3
3
3
3
2
2
2
1
1
3
3
2
2
1
1
1
1
1
1
2
2
2
2
2
2
2
2
1
1
1
3
1
3
2
2
1
2
3
3
3
2
2
3
2
3
2
3
3
2
3
3
3
2
2
3
3
3
3
3
3
2
1
1
2
3
1
Contact the division for special EP compound used on 60 Series couplings
I-6
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Safety Guide
Appendices
SAFETY GUIDE FOR SELECTING AND USING QUICK ACTION
COUPLINGS AND RELATED ACCESSORIES
DANGER: Failure or improper selection or improper use of quick action couplings or related accessories can cause death, personal
injury and property damage. Possible consequences of failure or improper selection or improper use of quick action couplings
or related accessories include but are not limited to:
• Couplings or parts thrown off at high speed.
• Dangerously whipping hose.
• High velocity fluid discharge.
• Contact with conveyed fluids that may be hot, cold,
• Explosion or burning of the conveyed fluid.
toxic, or otherwise injurious.
• Contact with suddenly moving or falling objects that are
• Sparking or explosion while paint or flammable
to be held in position or moved by the conveyed fluid.
liquid spraying.
Before selecting or using any Parker quick action couplings or related accessories, it is important that you read and follow the
following instructions.
1.1 Scope: This safety guide provides instructions for selecting and using
(including installing connecting, disconnecting, and maintaining) quick action
couplings and related accessories (including caps, plugs, blow guns, and two
way valves). This safety guide is a supplement to and is to be used with, the
specific Parker publications for the specific quick action couplings and related
accessories that are being considered for use.
2.4 Size: Transmission of power by means of pressurized liquid varies with
pressure and rate of flow. The size of the quick action couplings and other
components of the system must be adequate to keep pressure losses to a
minimum and avoid damage due to heat generation or excessive fluid velocity.
2.5 Pressurized Connect or Disconnect: If connecting or disconnecting
under pressure is a requirement, use only quick action couplings designed for
that purpose. The rated operating pressure of a quick action coupling may not
be the pressure at which it may be safely connected or disconnected.
1.2 Fail-Safe: Quick action couplings or the hose they are attached to can fail
without warning for many reasons. Design all systems and equipment in a failsafe mode, so that failure of the quick action coupling or hose will not endanger
persons or property.
2.6 Environment: Care must be taken to ensure that quick action couplings
are either compatible with or protected from the environment (that is,
surrounding conditions) to which they are exposed. Environmental conditions
including but not limited to ultraviolet radiation, ozone, moisture, water, salt
water, chemicals, and air pollutants can cause degradation and premature
failure.
1.3 Distribution: Provide a copy of this safety guide to each person that is
responsible for selecting or using quick action coupling products. Do not select
or use quick action couplings without thoroughly reading and understanding
this safety guide as well as the specific Parker publications for the products
considered or selected.
2.7 Locking Means: Ball locking quick action couplings can unintentionally
disconnect if they are dragged over obstructions on the end of a hose or if the
sleeve is bumped or moved enough to cause disconnect. Sleeves designed
with flanges to provide better gripping for oily or gloved hands are especially
susceptible to accidental disconnect and should not be used where these
conditions exist. Sleeve lock or union (threaded) sleeve designs should be
considered where there is a potential for accidental uncoupling.
1.4 User Responsibility: Due to the wide variety of operating conditions and
uses for quick action couplings, Parker and its distributors do not represent or
warrant that any particular quick action coupling is suitable for any specific end
use system. This safety guide does not analyze all technical parameters that
must be considered in selecting a product. The user, through its own analysis
and testing, is solely responsible for:
• Making the final selection of the quick action couplings.
• Assuring that the user’s requirements are met and that the use presents no
health or safety hazards.
• Providing all appropriate health and safety warnings on the equipment on
which the quick action couplings are used.
2.8 Mechanical Loads: External forces can significantly reduce quick action
couplings’ life or cause failure. Mechanical loads which must be considered
include excessive tensile or side loads, and vibration. Unusual applications
may require special testing prior to quick action couplings selection.
2.9 Specifications and Standards: When selecting quick action couplings,
government, industry, and Parker specifications must be reviewed and followed
as applicable.
1.5 Additional Questions: Call the appropriate Parker customer service
department if you have any questions or require any additional information. For
the telephone numbers of the appropriate customer service department, see
the Parker publication for the product being considered or used.
2.10 Vacuum: Not all quick action couplings are suitable or recommended for
vacuum service. Quick action couplings used for vacuum applications must be
selected to ensure that the quick actions couplings will withstand the vacuum
and pressure of the system.
2.0 QUICK ACTION COUPLING SELECTION INSTRUCTIONS
2.1 Pressure: Quick action couplings selection must be made so that the
published rated pressure of the coupling is equal to or greater than the
maximum system pressure. Surge pressures in the system higher than the
rated pressure of the coupling will shorten the quick action coupling’s life. Do
not confuse burst pressure or other pressure values with rated pressure and
do not use burst pressure or other pressure values for this purpose.
2.12 Radiant Heat: Quick action couplings can be heated to destruction or
loss of sealability without contact by such nearby items as hot manifolds or
molten metal. The same heat source may then initiate a fire. This can occur
despite the presence of cool air around the quick action couplings.
2.2 Fluid Compatibility: Quick action couplings selection must assure
compatibility of the body and seal materials with the fluid media used. See the
fluid compatibility chart in the Parker publication for the product being
considered or used.
2.13 Welding and Brazing: Heating of plated parts, including quick action
couplings and port adapters, above 450°F (232°C) such as during welding,
brazing, or soldering may emit deadly gases and may cause coupling seal
damage.
2.3 Temperature: Be certain that fluid and ambient temperatures, both
steady and transient, do not exceed the limitations of the quick action
couplings. Use caution and hand protection when connecting or disconnecting
quick action couplings that are heated or cooled by the media they are conducting or by their environment.
II-1
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Appendices
2.11 Fire Resistant Fluids: Some fire resistant fluids require seals other than
the standard nitrile used in many quick action couplings.
Safety Guide
Appendices
3.0 QUICK ACTION COUPLING INSTALLATION INSTRUCTIONS
4.1 Even with proper selection and installation, quick action coupling life may
be significantly reduced without a continuing maintenance program. Frequency
should be determined by the severity of the application and risk potential. A
maintenance program must be established and followed by the user and must
include the following as a minimum:
3.1 Pre-Installation Inspection: Before installing a quick action coupling,
visually inspect it and check for correct style, body material, seal material, and
catalog number. Before final installation, coupling halves should be connected
and disconnected with a sample of the mating half with which they will be
used.
4.2 Visual Inspection of Quick Action Couplings: Any of the following
conditions require immediate shut down and replacement of the quick action
coupling:
3.2 Quick Action Coupling Halves From Other Manufacturers: If a quick
action coupling assembly is made up of one Parker half and one half from
another manufacturer, the lowest pressure rating of the two halves should not
be exceeded.
• Cracked, damaged, or corroded quick action coupling parts.
• Leaks at the fitting, valve or mating seal.
• Broken coupling mounting hardware, especially breakaway clamps.
3.3 Fitting Installation: Use a thread sealant, lubricant, or a combination of
both when assembling pipe thread joints in quick action couplings. Be sure the
sealant is compatible with the system fluid or gas. To avoid system
contamination, use a liquid or paste type sealant rather than a tape style. Use
the flats provided to hold the quick action coupling when installing fittings. Do
not use pipe wrenches or a vice on other parts of the coupling to hold it when
installing or removing fittings as damage or loosening of threaded joints in the
coupling assembly could result. Do not apply excessive torque to taper pipe
threads because cracking or splitting of the female component can result.
4.3 Visual Inspection All Other: The following items must be tightened,
repaired or replaced as required:
• Leaking seals or port connections.
• Remove excess dirt buildup on the coupling locking means
or on the interface area of either coupling half.
• Clamps, guards, and shields.
• System fluid level, fluid type and any air entrapment.
3.4 Caps and Plugs: Use dust caps and plugs when quick action couplings
are not coupled to exclude dirt and contamination and to protect critical
surfaces from damage.
4.4 Functional Test: Operate the system at maximum operating pressure
and check for possible malfunctions and freedom from leaks. Personnel must
avoid potential hazardous areas while testing and using the system.
3.5 Coupling Location: Locate quick action couplings where they can be
reached for connect or disconnect without exposing the operator to slipping,
falling, getting sprayed, or coming in contact with hot or moving parts.
4.5 Replacement Intervals: Specific replacement intervals must be
considered based on previous service life, government or industry
recommendations, or when failures could result in unacceptable downtime,
damage or injury risk. See instruction 1.2 above.
3.6 Hose Whips: Use a hose whip (a short length of hose between the tool
and the coupling half) instead of rigidly mounting a coupling half on hand tools
or other devices. This reduces the potential for coupling damage if the tool is
dropped and provides some isolation from mechanical vibration which could
cause uncoupling.
Additional copies of the preceding safety information can be ordered by
requesting “Safety Guide For Selecting and Using Quick Action Couplings and
Related Accessories,” Parker Publication No. 3800-B1.0
4.0 QUICK ACTION COUPLING MAINTENANCE INSTRUCTIONS
Appendices
Contact The Quick Coupling Division, Minneapolis, MN.
II-2
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Alpha Numeric Index
Appendices
Note
2. Catalog numbers ending in the letter W, Y, or Z are not
listed in this index, as these suffixes merely designate the
use of an optional seal. The item can be located in the
catalog by referring to the basic number without the W, Y or
Z suffix. This does not apply to SM, HP, NS, NC, FF, FS, FH,
TC, and HO Series. Please see ordering information at the
end of Section B.
Part No.
Page
A2C.........................................A-15
A3C.........................................A-15
A8C.........................................A-15
A8CP ......................................A-15
B10-3B....................................A-10
B10-3BP .................................A-10
B10-4B....................................A-10
B10-5B....................................A-10
B10-5BP .................................A-10
B12 .........................................A-10
B12A .......................................A-10
B12E .......................................A-10
B13 .........................................A-10
B13A .......................................A-10
B13E .......................................A-10
B14 .........................................A-10
B15 .........................................A-10
B16................................A-10, A-13
B17................................A-10, A-13
B20-3B....................................A-13
B20-3BP .................................A-13
B20-4B....................................A-13
B20-5B....................................A-13
B20-5BP .................................A-13
B22 .........................................A-13
B22A .......................................A-13
B22E .......................................A-13
B23 .........................................A-13
B23A .......................................A-13
B23E .......................................A-13
B24 .........................................A-13
B25 .........................................A-13
B2C.........................................A-11
B30-3B....................................A-30
B30-3BP .................................A-30
B30-4B....................................A-30
B30-5B....................................A-30
B30-5BP .................................A-30
B32 .........................................A-29
B32A .......................................A-29
B32E .......................................A-29
B33 .........................................A-29
B33A .......................................A-29
B33E .......................................A-29
B34 .........................................A-29
B34-5B....................................A-30
B34-5BP .................................A-30
B34-6B....................................A-30
B34C.......................................A-29
B34F .......................................A-29
B35 .........................................A-29
B35C.......................................A-29
B35F .......................................A-29
B36 .........................................A-29
B36-6B....................................A-30
B36-6BP .................................A-30
B36-7B....................................A-30
Part No.
Page
B36E .......................................A-29
B36G.......................................A-29
B37 .........................................A-29
B37E .......................................A-29
B37G.......................................A-29
B38 .........................................A-29
B38-7B....................................A-30
B38-8B....................................A-30
B38J........................................A-29
B39 .........................................A-29
B39F .......................................A-29
B39J........................................A-29
B3C.........................................A-11
B50-3BP .................................A-14
B50-5BP .................................A-14
B52 .........................................A-14
B52E .......................................A-14
B53 .........................................A-14
B53E .......................................A-14
B72 .........................................A-16
B73 .........................................A-16
BG441-NBL ............................A-43
BG442-SBL.............................A-43
BG443-NBL ............................A-43
BG444-SBL.............................A-43
BG445-SBL.............................A-43
BH12-60L..................................B-8
BH12-60N .................................B-8
BH12-61L..................................B-8
BH12-61N .................................B-8
BH1-60......................................B-7
BH1-61......................................B-7
BH2016-60................................B-8
BH2016-61................................B-8
BH2020-60................................B-8
BH2020-61................................B-8
BH2024-60................................B-8
BH2024-61................................B-8
BH2-60......................................B-7
BH2-60-STM.............................B-9
BH2-61......................................B-7
BH2-61-STM.............................B-9
BH2C ........................................A-6
BH2E ........................................A-6
BH2F.........................................A-6
BH2G ........................................A-6
BH3-60......................................B-7
BH3-61......................................B-7
BH3C ........................................A-6
BH3E ........................................A-6
BH3F.........................................A-6
BH4-60......................................B-7
BH4-60-STM.............................B-9
BH4-61......................................B-7
BH4-61-STM.............................B-9
BH5G ........................................A-7
BH6-60......................................B-7
Part No.
Page
BH6-60-STM.............................B-9
BH6-61......................................B-7
BH6-61-STM.............................B-9
BH67E-60K...............................B-8
BH67E-61K...............................B-8
BH67F-60K ...............................B-8
BH67F-61K ...............................B-8
BH67G-60K ..............................B-8
BH67G-61K ..............................B-8
BH67J-60K ...............................B-8
BH67J-61K ...............................B-8
BH8-60......................................B-7
BH8-60-STM.............................B-9
BH8-61......................................B-7
BH8-61-STM.............................B-9
BH8CP......................................A-7
BPD323Y ................................F-19
BPD343Y ................................F-19
BPDFS341 ..............................F-26
BPDFS343 ..............................F-26
BPDFS357 ..............................F-26
BPN251F ................................B-51
BPN252F ................................B-51
BPN253F ................................B-51
BPN352F ................................B-51
BPN353F ................................B-51
BPV252...................................B-51
BPV353...................................B-51
BST-1 ......................................B-54
BST-10 ....................................B-54
BST-12 ....................................B-54
BST-1M ...................................B-54
BST-2 ......................................B-54
BST-2M ...................................B-54
BST-3 ......................................B-54
BST-3M ...................................B-54
BST-4 ......................................B-54
BST-4M ...................................B-54
BST-6 ......................................B-54
BST-6M ...................................B-54
BST-8 ......................................B-54
BST-8M ...................................B-54
BST-N1....................................B-55
BST-N10..................................B-55
BST-N10M...............................B-55
BST-N12..................................B-55
BST-N12M...............................B-55
BST-N1M.................................B-55
BST-N2....................................B-55
BST-N2M.................................B-55
BST-N3....................................B-55
BST-N3M.................................B-55
BST-N4....................................B-55
BST-N4M.................................B-55
BST-N6....................................B-55
BST-N6M.................................B-55
BST-N8....................................B-55
Part No.
Page
BST-N8M.................................B-55
C-25 ........................................B-60
C-50 ........................................B-60
C50A01-4-4 ............................A-25
C50A01-4-6 ............................A-25
C50A02-4-4 ............................A-25
C50A02-4-6 ............................A-25
C-75 ........................................B-60
CDM01-2-2Y...........................B-59
CDM01-2-4Y...........................B-59
CDM02-2-2Y...........................B-59
CDM02-2-4Y...........................B-59
CJ-251-4FP ............................A-40
CJ-251-4HB ............................A-40
CJ-251-4MP............................A-40
CJ-251-6FP ............................A-40
CJ-251-6HB ............................A-40
CJ-251-6MP............................A-40
CJ-254-4FP ............................A-40
CJ-254-4HB ............................A-40
CJ-254-4MP............................A-40
CJ-254-6FP ............................A-40
CJ-254-6HB ............................A-40
CJ-254-6MP............................A-40
CJ304F-4 ................................A-40
CJ304F-6 ................................A-40
CJ304HB-4 .............................A-40
CJ304HB-6 .............................A-40
CJ304M-4 ...............................A-40
CJ304M-6 ...............................A-40
CJ604F-4 ................................A-40
CJ604F-6 ................................A-40
CJ604HB-4 .............................A-40
CJ604HB-6 .............................A-40
CJ604M-4 ...............................A-40
CJ604M-6 ...............................A-40
CR-25 .....................................B-60
CRF01-4-4 ..............................A-19
CRF01-4-6 ..............................A-19
CRF01-4-8 ..............................A-19
CRF02-4-4 ..............................A-19
CRF02-4-6 ..............................A-19
CRFHB-4-4 .............................A-19
CRFHB-4-6 .............................A-19
CRFPL-4-4..............................A-19
CRFPL-4-6..............................A-19
CRFPL-4-8..............................A-19
CV-1000-FOFO.......................E-10
CV-1000-FPFP.......................E-11
CV-1000-MFMF.......................E-10
CV-1000-MOMS......................E-10
CV-250-FOFO.........................E-10
CV-250-FPFP .........................E-11
CV-250-MFMF.........................E-10
CV-250-MOMS........................E-10
CV-370-FOFO.........................E-10
CV-370-FPFP..........................E-11
* Denotes parts that are offered in brass as standard, and are also on page listed.
** Semi Standard, consult factory for price & delivery.
III-1
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Appendices
1. Inclusion of part numbers in this index or elsewhere in the
catalog is not necessarily an indication that they are
available from stock. Only items listed in the current price list
are carried in stock. Parts marked as Semi-Standard, consult
factory for price and delivery.
Alpha Numeric Index
Appendices
Appendices
Part No.
Page
CV-370-MFMF.........................E-10
CV-370-MOMS........................E-10
CV-500-FOFO.........................E-10
CV-500-FPFP.........................E-11
CV-500-MFMF.........................E-10
CV-500-MOMS........................E-10
CV-620-FOFO.........................E-10
CV-620-MFMF ........................E-10
CV-620-MOMS........................E-10
CV-750-FOFO.........................E-10
CV-750-FPFP .........................E-11
CV-750-MFMF.........................E-10
CV-750-MOMS .......................E-10
DM-121-2MP ..........................B-59
DM-121-2FP ...........................B-59
DM-121-4FP ...........................B-59
DM-121-4MP ..........................B-59
DM-122-2FP ...........................B-59
DM-122-2MP ..........................B-59
DM-122-4FP ...........................B-59
DM-122-4MP ..........................B-59
DP-50 ............................B-60, B-62
DT-1000-MFMF.........................E-6
DT-1000-MFMO ........................E-6
DT-1000-MOMF ........................E-6
DT-1000-MOMS ........................E-7
DT-1000-MSMO ........................E-7
DT-1000-MSMS ........................E-7
DT-1250-MFMF.........................E-6
DT-1250-MFMO ........................E-6
DT-1250-MOMF ........................E-6
DT-1250-MOMS ........................E-7
DT-1250-MSMO ........................E-7
DT-1250-MSMS ........................E-7
DT-250-MFMO ..........................E-6
DT-250-MOMF ..........................E-6
DT-250-MOMS ..........................E-6
DT-370-MFMF...........................E-6
DT-370-MFMO ..........................E-6
DT-370-MOMF ..........................E-6
DT-370-MOMS ..........................E-7
DT-370-MSMO ..........................E-7
DT-370-MSMS ..........................E-7
DT-500-MFMF...........................E-6
DT-500-MFMO ..........................E-6
DT-500-MOMF ..........................E-6
DT-500-MOMS ..........................E-7
DT-500-MSMO ..........................E-7
DT-500-MSMS ..........................E-7
DT-620-MFMF...........................E-6
DT-620-MFMO ..........................E-6
DT-620-MOMF ..........................E-6
DT-620-MOMS ..........................E-7
DT-620-MSMO ..........................E-7
DT-620-MSMS ..........................E-7
DT-750-MFMF...........................E-6
DT-750-MFMO ..........................E-6
DT-750-MOMF ..........................E-6
DT-750-MOMS ..........................E-7
DT-750-MSMO ..........................E-7
DT-750-MSMS ..........................E-7
EAS-500 .................................B-22
EMA3/1/4ED ...........................F-23
EMA3/1/4NPT .........................F-23
EMA3/1/4NPT71 .....................F-23
EMA3/1/8ED ...........................F-23
EMA3/1/8NPT .........................F-23
EMA3/10X1ED........................F-23
EMA3/12X1.5ED.....................F-23
EMA3/14X1.5ED.....................F-23
EMA3/3/8ED ...........................F-23
Part No.
Page
EMA3/7/16-20UNF-2A ............F-23
EMA3/9/16-18UNF-2A ............F-23
EMA3/M8X1OR ......................F-23
EMA3VS .................................F-24
EZ-251-4FP ............................A-38
EZ-251-4HB............................A-38
EZ-251-4MP ...........................A-38
EZ-251-4PL ............................A-38
EZ-251-6FP ............................A-38
EZ-251-6HB............................A-38
EZ-251-6MP ...........................A-38
EZ-251-6PL ............................A-38
EZ304F-4T..............................A-38
EZ304F-6T..............................A-38
EZ304HB-4T...........................A-38
EZ304HB-6T...........................A-38
EZ304M-4T.............................A-38
EZ304M-6T.............................A-38
EZ304PL-4T ...........................A-38
EZ304PL-6T ...........................A-38
EZ306F-6T..............................A-38
EZ306F-8T..............................A-38
EZ306HB-6T...........................A-38
EZ306M-6T.............................A-38
EZ306PL-6T ...........................A-38
EZ308F-12T............................A-38
EZ308F-8T..............................A-38
EZ308HB-8T...........................A-38
EZ308M-8T.............................A-38
EZ308PL-8T ...........................A-38
EZ312F-12T............................A-38
EZ312F-16T............................A-38
EZ312M-12T...........................A-38
EZ-371-6FP ............................A-38
EZ-371-6HB............................A-38
EZ-371-6MP ...........................A-38
EZ-371-6PL ............................A-38
EZ-371-8FP ............................A-38
EZ-501-12FP ..........................A-38
EZ-501-8FP ............................A-38
EZ-501-8HB............................A-38
EZ-501-8MP ...........................A-38
EZ-501-8PL ............................A-38
EZ-751-12FP ..........................A-38
EZ-751-12MP .........................A-38
EZ-751-16FP ..........................A-38
FAS-500 ..................................B-22
FC-372-6FP ............................B-29
FC-372-8FO............................B-29
FC-372-8FP ............................B-29
FC-502-10FO..........................B-29
FC-502-8FP ............................B-29
FC-752-12FO..........................B-29
FC-752-12FP ..........................B-29
FE-501 ....................................B-30
FE-501-12FO..........................B-26
FE-501-8FP ............................B-26
FE-502-12FO..........................B-26
FE-502-8FP ............................B-26
FE-621-12FO..........................B-26
FE-622-12FO..........................B-26
FEC-1002-16FO .....................B-30
FEC-1002-16FP......................B-30
FEC-502-10FO .......................B-30
FEC-502-12FO .......................B-30
FEC-502-8FP..........................B-30
FEC-622-12FO .......................B-30
FEC-752-12FO .......................B-30
FEM-1001 ...............................B-30
FEM-1001-16FO-NL ...............B-28
FEM-1001-16FP-NL ...............B-28
Part No.
Page
FEM-1002-16FO.....................B-28
FEM-1002-16FP .....................B-28
FEM-251-4FP-NL ...................B-28
FEM-252-4FP .........................B-28
FEM-371-6FP-NL ...................B-28
FEM-371-8FO-NL ...................B-28
FEM-372-6FP..........................B-28
FEM-372-8FO.........................B-28
FEM-501-10BMF-NL ..............B-28
FEM-501-10BMS-NL ..............B-28
FEM-501-10FO-NL .................B-28
FEM-501-12FO-NL .................B-28
FEM-501-8FP-NL ...................B-28
FEM-502-10BMS ....................B-28
FEM-502-10FO.......................B-28
FEM-502-10BMF ....................B-28
FEM-502-12FO.......................B-28
FEM-502-8FP .........................B-28
FEM-621 .................................B-30
FEM-621-12FO-NL .................B-28
FEM-622-12FO.......................B-28
FEM-751 .................................B-30
FEM-751-12FO-NL .................B-28
FEM-751-12FP-NL .................B-28
FEM-752-12FO.......................B-28
FEM-752-12FP .......................B-28
FER-502 .................................B-61
FER-752 .................................B-61
FF/FS-1001-TOOL ........B-24, B-34
FF/FS-251-TOOL ..........B-24, B-34
FF/FS-371-TOOL ..........B-24, B-34
FF/FS-751-TOOL ..........B-24, B-34
FF-1001-16FO ........................B-24
FF-1001-16FP ........................B-24
FF-1001-KIT ...........................B-24
FF-1001-KIT-E4 ......................B-24
FF-1001-KIT-E5 ......................B-24
FF-1002-16FO ........................B-24
FF-1002-16FP ........................B-24
FF-1002-KIT ...........................B-24
FF-1002-KIT-E4 ......................B-24
FF-1002-KIT-E5 ......................B-24
FF-251-4FP ............................B-24
FF-251-4MP............................B-24
FF-251-6F0.............................B-24
FF-251-KIT .............................B-24
FF-251-KIT-E4 ........................B-24
FF-251-KIT-E5 ........................B-24
FF-252-4FP ............................B-24
FF-252-4MP............................B-24
FF-252-6F0.............................B-24
FF-252-KIT .............................B-24
FF-252-KIT-E4 ........................B-24
FF-252-KIT-E5 ........................B-24
FF-371 ....................................B-29
FF-371-6FB ............................B-24
FF-371-6FP ............................B-24
FF-371-8FB ............................B-24
FF-371-8FO ............................B-24
FF-371-8FP ............................B-24
FF-371-KIT .............................B-24
FF-371-KIT-E4 ........................B-24
FF-371-KIT-E5 ........................B-24
FF-372-6FB ............................B-24
FF-372-6FP ............................B-24
FF-372-8FB ............................B-24
FF-372-8FO ............................B-24
FF-372-8FP ............................B-24
FF-372-KIT .............................B-24
FF-372-KIT-E4 ........................B-24
FF-372-KIT-E5 ........................B-24
III-2
Part No.
Page
FF-501 ....................................B-29
FF-501-10FO ..........................B-24
FF-501-8FP ............................B-24
FF-501-KIT .............................B-24
FF-501-KIT-E4 ........................B-24
FF-501-KIT-E5 ........................B-24
FF-501-TOOL .........................B-24
FF-502-10FO ..........................B-24
FF-502-8FP ............................B-24
FF-502-KIT .............................B-24
FF-502-KIT-E4 ........................B-24
FF-502-KIT-E5 ........................B-24
FF-751 ....................................B-29
FF-751-12FO ..........................B-24
FF-751-12FP ..........................B-24
FF-751-KIT .............................B-24
FF-751-KIT-E4 ........................B-24
FF-751-KIT-E5 ........................B-24
FF-752-12FO ..........................B-24
FF-752-12FP ..........................B-24
FF-752-KIT .............................B-24
FF-752-KIT-E4 ........................B-24
FF-752-KIT-E5 ........................B-24
FH-371-6FB ............................B-32
FH-371-6FP ............................B-32
FH-371-6MP ...........................B-32
FH-372-6FB ............................B-32
FH-372-6FP ............................B-32
FR-1001..................................B-61
FR-1002..................................B-61
FR-25......................................B-61
FR-501 ............................B-61, C-9
FR-502 ............................B-61, C-9
FR-751....................................B-61
FR-752....................................B-61
FS-1001-16FO........................B-34
FS-1001-16FP ........................B-34
FS-1001-KIT ...........................B-34
FS-1001-KIT-E5 ......................B-34
FS-1002-16FO........................B-34
FS-1002-16FP ........................B-34
FS-1002-KIT ...........................B-34
FS-1002-KIT-E5 ......................B-34
FS-251-4FP ............................B-34
FS-251-4MP ...........................B-34
FS-251-6FO............................B-34
FS-251-KIT .............................B-34
FS-251-KIT-E5 ........................B-34
FS-252-4FP ............................B-34
FS-252-4MP ...........................B-34
FS-252-6FO............................B-34
FS-252-KIT .............................B-34
FS-252-KIT-E5 ........................B-34
FS-371-6FP ............................B-34
FS-371-8FO............................B-34
FS-371-KIT .............................B-34
FS-371-KIT-E5 ........................B-34
FS-372-6FP ............................B-34
FS-372-8FO............................B-34
FS-372-KIT .............................B-34
FS-372-KIT-E5 ........................B-34
FS-501-10FO..........................B-34
FS-501-8FP ............................B-34
FS-501-KIT .............................B-34
FS-501-KIT-E5 ........................B-34
FS-501-TOOL .........................B-34
FS-502-10FO..........................B-34
FS-502-8FP ............................B-34
FS-502-KIT .............................B-34
FS-502-KIT-E5 ........................B-34
FS-751-12FO..........................B-34
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Alpha Numeric Index
Part No.
Page
FS-751-12FP ..........................B-34
FS-751-KIT .............................B-34
FS-751-KIT-E5 ........................B-34
FS-752-12FO..........................B-34
FS-752-12FP ..........................B-34
FS-752-KIT .............................B-34
FS-752-KIT-E5 ........................B-34
H00E.........................................A-6
H0C...........................................A-6
H0E...........................................A-6
H0F ...........................................A-6
H12-62L ....................................B-8
H12-62N ...................................B-8
H12-62-T20...............................B-8
H12-62-T24...............................B-8
H12-63L ....................................B-8
H12-63N ...................................B-8
H12-63-T20...............................B-8
H12-63-T24...............................B-8
H12-65 ....................................B-60
H12-66 ....................................B-60
H1-62 ........................................B-7
H1-62-T4...................................B-7
H1-63 ........................................B-7
H1-63-T4...................................B-7
H1-65 ......................................B-60
H1-65M ...................................B-60
H1-66 ......................................B-60
H1-66M ...................................B-60
H1C...........................................A-6
H1E...........................................A-6
H1F ...........................................A-6
H2016-62 ..................................B-8
H2016-63 ..................................B-8
H2020-62 ..................................B-8
H2020-63 ..................................B-8
H2024-62 ..................................B-8
H2024-63 ..................................B-8
H20P-65..................................B-60
H20P-66..................................B-60
H2-62 ........................................B-7
H2-62-T6...................................B-7
H2-63 ........................................B-7
H2-63-T6...................................B-7
H2-65 ......................................B-60
H2-65M ...................................B-60
H2-66 ......................................B-60
H2-66M ...................................B-60
H2C...........................................A-6
H2C-E .......................................A-6
H2C-PS ..................................D-26
H2E...........................................A-6
H2E-F .......................................A-6
H2F ...........................................A-6
H2F-G .............................A-6, A-11
H2G ..........................................A-6
H2G-F .......................................A-6
H2G-J .......................................A-6
H3-62 ........................................B-7
H3-62-T8...................................B-7
H3-63 ........................................B-7
H3-63-T8...................................B-7
H3-65 ......................................B-60
H3-65M ...................................B-60
H3-66 ......................................B-60
H3-66M ...................................B-60
H3-68 ........................................B-9
H3-69 ........................................B-9
H3C...........................................A-6
H3C-E .......................................A-6
H3E...........................................A-6
Part No.
Page
H3E-F .......................................A-6
H3F ...........................................A-6
H3F-G .............................A-6, A-11
H3G ..........................................A-6
H3G-F .......................................A-6
H3G-J .......................................A-6
H4-62 ........................................B-7
H4-62-T10.................................B-7
H4-63 ........................................B-7
H4-63-T10.................................B-7
H4-65 ......................................B-60
H4-65M ...................................B-60
H4-66 ......................................B-60
H4-66M ...................................B-60
H4EP ........................................A-7
H4F .................................A-7, A-11
H4FP ...............................A-7, A-11
H5E...........................................A-7
H5EP ........................................A-7
H5F ...........................................A-7
H5F-G .............................A-7, A-11
H5FP................................A-7, A-11
H5G ..........................................A-7
H5G-F .......................................A-7
H5G-J .......................................A-7
H6-62 ........................................B-7
H6-62-T12.................................B-7
H6-63 ........................................B-7
H6-63-T12.................................B-7
H6-65 ......................................B-60
H6-65M ...................................B-60
H6-66 ......................................B-60
H6-66M ...................................B-60
H67A-28....................................B-8
H67C-28 ...................................B-8
H67E-62K .................................B-8
H67E-63K .................................B-8
H67F-62K .................................B-8
H67F-63K .................................B-8
H67G-62K.................................B-8
H67G-63K.................................B-8
H67J-62K..................................B-8
H67J-63K..................................B-8
H68E-67K .................................B-9
H69E-67K .................................B-9
H6E...........................................A-7
H6EP ........................................A-7
H6FP.........................................A-7
H8-62 ........................................B-7
H8-62-T16.................................B-7
H8-63 ........................................B-7
H8-63-T16.................................B-7
H8-65 ......................................B-60
H8-65M ...................................B-60
H8-66 ......................................B-60
H8-66M ...................................B-60
H8C...........................................A-7
H8C-D.......................................A-7
H8CP ........................................A-7
H9C...........................................A-7
H9CP ........................................A-7
HA-251-4FP............................A-25
HA-251-4MP ...........................A-25
HA-251-6FP. ...........................A-25
HA-251-6MP ...........................A-25
HF-121-2FP ............................A-22
HF-121-2MP ...........................A-22
HF-121-4FP.............................A-22
HF-121-4MP ...........................A-22
HF-124-2FP ............................A-22
HF-124-2MP ...........................A-22
Part No.
Page
HF-124-4FP ............................A-22
HF-124-4MP ...........................A-22
HF-251-4FP ............................A-23
HF-251-4FP-S ........................A-24
HF-251-4HB............................A-23
HF-251-4HB-S ........................A-24
HF-251-4MP ...........................A-23
HF-251-4MP-S........................A-24
HF-251-4PL ............................A-23
HF-251-4PL-S.........................A-24
HF-251-6FP ............................A-23
HF-251-6FP-S ........................A-24
HF-251-6HB............................A-23
HF-251-6HB-S ........................A-24
HF-251-6MP ...........................A-23
HF-251-6MP-S........................A-24
HF-251-6PL ............................A-23
HF-251-6PL-S.........................A-24
HF302F-2................................A-22
HF302F-4................................A-22
HF302M-2...............................A-22
HF302M-4...............................A-22
HF304F-4................................A-23
HF304F-6................................A-23
HF304HB-4.............................A-23
HF304HB-6.............................A-23
HF304M-4...............................A-23
HF304M-6...............................A-23
HF304PL-4 .............................A-23
HF304PL-6 .............................A-23
HF306F-4................................A-23
HF306F-6................................A-23
HF306F-8................................A-23
HF306HB-6.............................A-23
HF306HB-8.............................A-23
HF306M-4...............................A-23
HF306M-6...............................A-23
HF306M-8...............................A-23
HF306PL-6 .............................A-23
HF306PL-8 .............................A-23
HF-371-4FP ............................A-23
HF-371-4FP-S ........................A-24
HF-371-4MP ...........................A-23
HF-371-4MP-S........................A-24
HF-371-6FP ............................A-23
HF-371-6FP-S ........................A-24
HF-371-6HB............................A-23
HF-371-6HB-S ........................A-24
HF-371-6MP ...........................A-23
HF-371-6MP-S........................A-24
HF-371-6PL ............................A-23
HF-371-6PL-S.........................A-24
HF-371-8FP ............................A-23
HF-371-8FP-S ........................A-24
HF-371-8HB............................A-23
HF-371-8HB-S ........................A-24
HF-371-8MP ...........................A-23
HF-371-8MP-S........................A-24
HF-371-8PL ............................A-23
HF-371-8PL-S.........................A-24
HF404F-4................................A-24
HF404F-6................................A-24
HF404HB-4.............................A-24
HF404HB-6.............................A-24
HF404M-4...............................A-24
HF404M-6...............................A-24
HF404PL-4 .............................A-24
HF404PL-6 .............................A-24
HF406F-4................................A-24
HF406F-6................................A-24
HF406F-8................................A-24
III-3
Part No.
Page
HF406HB-6.............................A-24
HF406HB-8.............................A-24
HF406M-4...............................A-24
HF406M-6...............................A-24
HF406M-8...............................A-24
HF406PL-6 .............................A-24
HF406PL-8 .............................A-24
HF-501-8FP ............................A-23
HF-501-8MP ...........................A-23
HF702F-2................................A-22
HF702F-4................................A-22
HF702M-2...............................A-22
HF702M-4...............................A-22
HO-251-4FP ...........................B-57
HO-252-4FP ...........................B-57
HO-371-6FP ...........................B-57
HO-372-6FP ...........................B-57
HO-501-8FP ...........................B-57
HO-502-8FP ...........................B-57
HP-1001-16FO .......................B-15
HP-1001-16FP........................B-15
HP-1002-16FO .......................B-15
HP-1002-16FP........................B-15
HP-1501-24FO .......................B-15
HP-1501-24FP........................B-15
HP-1502-24FO .......................B-15
HP-1502-24FP........................B-15
HPC-100 .......................B-15, B-61
HPC-150 .......................B-15, B-61
HPP-100........................B-15, B-61
HPP-150........................B-15, B-61
KEY-BK ...................................B-64
KEY-BU ...................................B-64
KEY-CL ...................................B-64
KEY-GR...................................B-64
KEY-NI ....................................B-64
KEY-RD...................................B-64
L2C .........................................A-16
L3C .........................................A-16
MAV1/4NPT-MA3 ....................F-24
MAV1/4NPT-MA3-KM..............F-24
MAVMD1/4NPT-MA3...............F-24
NDM01-2-2Y...........................B-59
NDM01-2-4Y...........................B-59
NDM02-2-2Y...........................B-59
NDM02-2-4Y...........................B-59
NR-100 ...................................B-61
NR-37 .....................................B-61
NR-50 .....................................B-61
NR-75 .....................................B-61
NRF01-4-4-S ..........................A-20
NRF01-4-6-S ..........................A-20
NRF02-4-4-S ..........................A-20
NRF02-4-6-S ..........................A-20
NRFHB-4-4-S .........................A-20
NRFHB-4-6-S .........................A-20
NRFPL-4-4-S ..........................A-20
NRFPL-4-6-S ..........................A-20
NS-1001-16FB........................B-21
NS-1001-16FO .......................B-21
NS-1001-16FP........................B-21
NS-1002-16FB........................B-21
NS-1002-16FO .......................B-21
NS-1002-16FP........................B-21
NS-371-6FB............................B-21
NS-371-6FP............................B-21
NS-371-8FO ...........................B-21
NS-372-6FB............................B-21
NS-372-6FP............................B-21
NS-372-8FO ...........................B-21
NS-501-10FO .........................B-21
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Appendices
Appendices
Alpha Numeric Index
Appendices
Appendices
Part No.
Page
NS-501-8FB............................B-21
NS-501-8FP............................B-21
NS-502-10FO .........................B-21
NS-502-8FB............................B-21
NS-502-8FP............................B-21
NS-751-12FB..........................B-21
NS-751-12FO .........................B-21
NS-751-12FP..........................B-21
NS-752-12FB..........................B-21
NS-752-12FO .........................B-21
NS-752-12FP..........................B-21
P200-9A..................................B-50
P200-9AY................................B-50
P201-01A................................B-50
P208-01A................................B-50
P-25 ........................................B-60
P300-11S................................B-50
P300-6 ....................................B-50
P300-9A..................................B-50
P300-9AY................................B-50
P301-01A................................B-50
P308-01A................................B-50
P308-01A-HF..........................B-50
P410B .....................................A-44
P415B .....................................A-44
P420B .....................................A-44
P-50 ........................................B-60
P500-9A..................................B-50
P-75 ........................................B-60
PBH-251-4FP .........................A-34
PBH-251-4MP.........................A-34
PBH-251-6FP .........................A-34
PBH-251-6MP.........................A-34
PBH-371-4FP .........................A-34
PBH-371-4MP.........................A-34
PBH-371-6FP .........................A-34
PBH-371-6MP.........................A-34
PBH-371-8FP .........................A-34
PBS-251-4FP. .........................A-36
PBS-251-4MP.........................A-36
PBS-251-6FP..........................A-36
PBS-251-6MP.........................A-36
PBS-371-6FP..........................A-36
PBS-371-6MP.........................A-36
PBS-371-8FP..........................A-36
PBS-371-8MP.........................A-36
PBS-501-12FP........................A-36
PBS-501-6FP..........................A-36
PBS-501-8FP..........................A-36
PBS-501-8MP.........................A-36
PC204.....................................B-49
PC204AV ................................B-49
PC204AV-BP...........................B-49
PC204-BP...............................B-49
PC205.....................................B-49
PC205AV ................................B-49
PC206.....................................B-49
PC206AV ................................B-49
PC206AV-BP...........................B-49
PC206-BP...............................B-49
PC214.....................................B-50
PC214AV ................................B-50
PC214AV-BP...........................B-50
PC214-BP...............................B-50
PC215.....................................B-50
PC215AV ................................B-50
PC216.....................................B-50
PC216AV ................................B-50
PC216AV-BP...........................B-50
PC216-BP...............................B-50
PC224.....................................B-49
Part No.
Page
PC224AV ................................B-49
PC224AV-BP...........................B-49
PC224-BP...............................B-49
PC225.....................................B-49
PC225AV ................................B-49
PC226.....................................B-49
PC226AV ................................B-49
PC226AV-BP...........................B-49
PC226-BP...............................B-49
PC306.....................................B-49
PC306-BP...............................B-49
PC306V ..................................B-49
PC306V-BP.............................B-49
PC308.....................................B-49
PC308-BP...............................B-49
PC308V ..................................B-49
PC308V-BP.............................B-49
PC316.....................................B-50
PC316-BP...............................B-50
PC316V ..................................B-50
PC316V-BP.............................B-50
PC318.....................................B-50
PC318-BP...............................B-50
PC318V ..................................B-50
PC318V-BP.............................B-50
PC326.....................................B-49
PC326-BP...............................B-49
PC326V...................................B-49
PC326V-BP.............................B-49
PC328.....................................B-49
PC328-BP...............................B-49
PC328V ..................................B-49
PC328V-BP.............................B-49
PC500.....................................B-50
PC504.....................................B-49
PC504-BP...............................B-49
PC506.....................................B-49
PC506-BP...............................B-49
PC514.....................................B-50
PC514-BP...............................B-50
PC516.....................................B-50
PC516-BP...............................B-50
PC524.....................................B-49
PC524-BP...............................B-49
PC526.....................................B-49
PC526-BP...............................B-49
PD222 .....................................F-19
PD240..............................F-5, F-19
PD242 .....................................F-19
PD243 .....................................F-19
PD260 .....................................F-19
PD288 ....................F-9, F-15, F-25
PD3107 ...................................F-19
PD310BTL ..............................F-20
PD3127 ...................................F-19
PD312BTX ..............................F-20
PD3147 ...................................F-19
PD322 .....................................F-19
PD323 .....................................F-19
PD331 .....................................F-19
PD341 .....................................F-19
PD342 .....................................F-19
PD343 .....................................F-19
PD345 .....................................F-20
PD346 .....................................F-20
PD34BTL ................................F-20
PD34BTX ................................F-20
PD351 .....................................F-19
PD355 .....................................F-20
PD357 .....................................F-19
PD361 .....................................F-19
Part No.
Page
PD363 .....................................F-19
PD365 .....................................F-20
PD366 .....................................F-20
PD367C ..................................F-19
PD36BTL ................................F-20
PD36BTX ................................F-20
PD386 .....................................F-20
PD38BTL ................................F-20
PD38BTU................................F-20
PD38BTX ................................F-20
PD6-285..................................F-21
PDEMA3TA-* .................F-14, F-16
PDFEMA-* ..............................F-10
PDFEMA-0004........................F-17
PDFEMA-0216........................F-17
PDFEMA-0480........................F-17
PDFEMA-7160........................F-17
PDFPD-* .................................F-10
PDFPD-0004...........................F-17
PDFPD-0216...........................F-17
PDFPD-0480...........................F-17
PDFPD-7160...........................F-17
PDFPDP-*...............................F-10
PDFPDP-0004 ........................F-17
PDFPDP-0216 ........................F-17
PDFPDP-0480 ........................F-17
PDFPDP-7160 ........................F-17
PDFS242 ................................F-26
PDFS-PROBE.........................F-26
PDFS-TEST ............................F-26
PDFS-TEST-P .........................F-26
PDH-19 ....................F-5, F-9, F-15
PDP242...................................F-21
PDP288..................F-9, F-15, F-25
PDP323...................................F-22
PDP341...................................F-22
PDP343...................................F-22
PDP34BTL ..............................F-22
PDP34BTX..............................F-22
PDP361...................................F-22
PDP36BTL ..............................F-22
PDP36BTX..............................F-22
PDPTA-* ........................F-14, F-16
PDS1-* ....................................F-10
PDS2-* ....................................F-10
PDSM35-* ...............................F-16
PDSM45-* ...............................F-16
PDTA-*...........................F-14, F-16
PDTEMA3S-*.................F-14, F-16
PER-251-4FP .........................A-34
PER-251-4MP.........................A-34
PER-251-6FP. .........................A-34
PER-251-6MP.........................A-34
PES-251-4FP..........................A-36
PES-251-4MP.........................A-36
PES-251-6FP..........................A-36
PES-251-6MP.........................A-36
PF-1001-16FP ..........................C-9
PF-1002-16FP ..........................C-9
PF-1002-32MB .........................C-9
PF-1002-32MP..........................C-9
PF-2001-32FP ..........................C-9
PF-2002-32FP ..........................C-9
PF-501-8FP ..............................C-9
PF-502-8FP ..............................C-9
PFR-1002 .................................C-9
PFR-1002-NS ...........................C-9
PL-25 ......................................B-60
PN250.....................................B-51
PN250-25................................B-52
PN250-40................................B-52
III-4
Part No.
Page
PN250-55................................B-52
PN251.....................................B-51
PN251-25................................B-52
PN251-40................................B-52
PN251-55................................B-52
PN251-70................................B-52
PN251-85................................B-52
PN251F...................................B-51
PN251S ..................................B-51
PN252.....................................B-51
PN252-25................................B-52
PN252-40................................B-52
PN252-55................................B-52
PN252-70................................B-52
PN252-85................................B-52
PN252F...................................B-51
PN252S ..................................B-51
PN253.....................................B-51
PN253F...................................B-51
PN253S ..................................B-51
PN351-25................................B-52
PN351-40................................B-52
PN351-55................................B-52
PN351-70................................B-52
PN351-85................................B-52
PN352.....................................B-51
PN352-25................................B-52
PN352-40................................B-52
PN352-55................................B-52
PN352-70................................B-52
PN352-85................................B-52
PN352F...................................B-51
PN352S ..................................B-51
PN353.....................................B-51
PN353-25................................B-52
PN353-40................................B-52
PN353-55................................B-52
PN353-70................................B-52
PN353-85................................B-52
PN353F...................................B-51
PN353S ..................................B-51
PN354.....................................B-51
PN553.....................................B-51
PN554.....................................B-51
PN556.....................................B-51
PR-25......................................B-60
PROBEHOLDER ....................F-26
PS1210102-12-12 ....................D-6
PS1210103-12-12 ....................D-6
PS1210106-12-12 ....................D-6
PS1210110-12-12 ....................D-7
PS12101JM-12-12....................D-7
PS1210202-12-12 ....................D-7
PS1210203-12-12 ....................D-8
PS1210206-12-12 ....................D-8
PS1210210-12-12 ....................D-8
PS12102JM-12-12....................D-8
PS1210302-12-12 ....................D-9
PS1210303-12-12 ....................D-9
PS1210306-12-12 ....................D-9
PS1210310-12-12 ..................D-10
PS12103JM-12-12..................D-10
PS1210502-12-12 ..................D-10
PS1210503-12-12 ..................D-11
PS1210506-12-12 ..................D-11
PS1210510-12-12 ..................D-11
PS12105JM-12-12..................D-11
PS1211002-12-12 ..................D-12
PS1211003-12-12 ..................D-12
PS1211006-12-12 ..................D-12
PS1211010-12-12 ..................D-12
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Alpha Numeric Index
Part No.
Page
PS12110JM-12-12..................D-13
PS121JM02-12-12..................D-13
PS121JM03-12-12..................D-13
PS121JM06-12-12..................D-13
PS121JM10-12-12...................D14
PS121JMJM-12-12 ..................D14
PS1290102-12-12 ..................D-15
PS1290103-12-12 ..................D-15
PS1290105-12-12 ..................D-16
PS1290106-12-12 ..................D-16
PS1290107-12-12 ..................D-16
PS1290110-12-12 ..................D-16
PS12901JM-12-12..................D-17
PS1290202-12-12 ..................D-17
PS1290203-12-12 ..................D-17
PS1290205-12-12 ..................D-18
PS1290206-12-12 ..................D-18
PS1290207-12-12 ..................D-18
PS1290210-12-12 ..................D-18
PS12902JM-12-12..................D-19
PS1290302-12-12 ..................D-19
PS1290303-12-12 ..................D-19
PS1290305-12-12 ..................D-20
PS1290306-12-12 ..................D-20
PS1290307-12-12 ..................D-20
PS1290310-12-12 ..................D-20
PS12903JM-12-12..................D-21
PS1290502-12-12 ..................D-21
PS1290503-12-12 ..................D-21
PS1290505-12-12 ..................D-21
PS1290506-12-12 ..................D-22
PS1290507-12-12 ..................D-22
PS1290510-12-12 ..................D-22
PS12905JM-12-12..................D-22
PS1291002-12-12 ..................D-23
PS1291003-12-12 ..................D-23
PS1291005-12-12 ..................D-23
PS1291006-12-12 ..................D-23
PS1291007-12-12 ..................D-23
PS1291010-12-12 ..................D-24
PS12910JM-12-12..................D-24
PS129JM02-12-12..................D-24
PS129JM03-12-12..................D-24
PS129JM05-12-12..................D-25
PS129JM06-12-12..................D-25
PS129JM07-12-12..................D-25
PS129JM10-12-12..................D-25
PS129JMJM-12-12.................D-25
PS12A-RPR............................D-26
PS12-RPR ..............................D-26
PS12W-RPR...........................D-26
PS12Y-RPR ............................D-26
PS1610102-16-16 ....................D-6
PS1610103-16-16 ....................D-6
PS1610106-16-16 ....................D-6
PS1610110-16-16 ....................D-7
PS16101JM-16-16....................D-7
PS1610202-16-16 ....................D-7
PS1610203-16-16 ....................D-8
PS1610206-16-16 ....................D-8
PS1610210-16-16 ....................D-8
PS16102JM-16-16....................D-8
PS1610302-16-16 ....................D-9
PS1610303-16-16 ....................D-9
PS1610306-16-16 ....................D-9
PS1610310-16-16 ..................D-10
PS16103JM-16-16..................D-10
PS1610502-16-16 ..................D-10
PS1610503-16-16 ..................D-11
PS1610506-16-16 ..................D-11
PS1610510-16-16 ..................D-11
Part No.
Page
PS16105JM-16-16..................D-11
PS1611002-16-16 ..................D-12
PS1611003-16-16 ..................D-12
PS1611006-16-16 ..................D-12
PS1611010-16-16 ..................D-12
PS16110JM-16-16..................D-13
PS161JM02-16-16..................D-13
PS161JM03-16-16..................D-13
PS161JM06-16-16..................D-13
PS161JM10-16-16...................D14
PS161JMJM-16-16 ..................D14
PS1690102-16-16 ..................D-15
PS1690103-16-16 ..................D-15
PS1690105-16-16 ..................D-16
PS1690106-16-16 ..................D-16
PS1690107-16-16 ..................D-16
PS1690110-16-16 ..................D-16
PS16901JM-16-16..................D-17
PS1690202-16-16 ..................D-17
PS1690203-16-16 ..................D-17
PS1690205-16-16 ..................D-18
PS1690206-16-16 ..................D-18
PS1690207-16-16 ..................D-18
PS1690210-16-16 ..................D-18
PS16902JM-16-16..................D-19
PS1690302-16-16 ..................D-19
PS1690303-16-16 ..................D-19
PS1690305-16-16 ..................D-20
PS1690306-16-16 ..................D-20
PS1690307-16-16 ..................D-20
PS1690310-16-16 ..................D-20
PS16903JM-16-16..................D-21
PS1690502-16-16 ..................D-21
PS1690503-16-16 ..................D-21
PS1690505-16-16 ..................D-21
PS1690506-16-16 ..................D-22
PS1690507-16-16 ..................D-22
PS1690510-16-16 ..................D-22
PS16905JM-16-16..................D-22
PS1691002-16-16 ..................D-23
PS1691003-16-16 ..................D-23
PS1691005-16-16. .................D-23
PS1691006-16-16 ..................D-23
PS1691007-16-16 ..................D-23
PS1691010-16-16 ..................D-24
PS16910JM-16-16..................D-24
PS169JM02-16-16..................D-24
PS169JM03-16-16..................D-24
PS169JM05-16-16..................D-25
PS169JM06-16-16..................D-25
PS169JM07-16-16..................D-25
PS169JM10-16-16..................D-25
PS169JMJM-16-16.................D-25
PS16A-RPR............................D-26
PS16-RPR ..............................D-26
PS16W-RPR...........................D-26
PS16Y-RPR ............................D-26
PS2410202-20-20 ....................D-7
PS2410202-24-24 ....................D-7
PS2410203-20-20 ....................D-8
PS2410203-24-24 ....................D-8
PS2410302-20-20 ....................D-9
PS2410302-24-24 ....................D-9
PS2410303-20-20 ....................D-9
PS2410303-24-24 ....................D-9
PS2410310-20-20 ..................D-10
PS2410310-24-24 ..................D-10
PS2411010-20-20 ..................D-12
PS2411010-24-24 ..................D-12
PS2490202-20-20 ..................D-17
PS2490202-24-24 ..................D-17
Part No.
Page
PS2490203-20-20 ..................D-17
PS2490203-24-24 ..................D-17
PS2490210-20-20 ..................D-18
PS2490210-24-24 ..................D-18
PS2490302-20-20 ..................D-19
PS2490302-24-24 ..................D-19
PS2490303-20-20 ..................D-19
PS2490303-24-24 ..................D-19
PS2491010-20-20 ..................D-24
PS2491010-24-24 ..................D-24
PS3210202-32-32 ....................D-7
PS3210203-32-32 ....................D-8
PS3210302-32-32 ....................D-9
PS3210303-32-32 ....................D-9
PS3210310-32-32 ..................D-10
PS3211010-32-32 ..................D-12
PS3290202-32-32 ..................D-17
PS3290203-32-32 ..................D-17
PS3290210-32-32 ..................D-18
PS3290302-32-32 ..................D-19
PS3290303-32-32 ..................D-19
PS3291010-32-32 ..................D-24
PS410102-4-4 ..........................D-6
PS410103-4-4 ..........................D-6
PS410106-4-4 ..........................D-6
PS410110-4-4 ..........................D-7
PS4101JM-4-4..........................D-7
PS410202-4-4 ..........................D-7
PS410203-4-4 ..........................D-8
PS410206-4-4 ..........................D-8
PS410210-4-4 ..........................D-8
PS4102JM-4-4..........................D-8
PS410302-4-4 ..........................D-9
PS410303-4-4 ..........................D-9
PS410306-4-4 ..........................D-9
PS410310-4-4 ........................D-10
PS4103JM-4-4........................D-10
PS410502-4-4 ........................D-10
PS410503-4-4 ........................D-11
PS410506-4-4 ........................D-11
PS410510-4-4 ........................D-11
PS4105JM-4-4........................D-11
PS411002-4-4 ........................D-12
PS411003-4-4 ........................D-12
PS411006-4-4 ........................D-12
PS411010-4-4 ........................D-12
PS4110JM-4-4........................D-13
PS41JM02-4-4........................D-13
PS41JM03-4-4........................D-13
PS41JM06-4-4........................D-13
PS41JM10-4-4.........................D14
PS41JMJM-4-4 ........................D14
PS490102-4-4 ........................D-15
PS490103-4-4 ........................D-15
PS490105-4-4 ........................D-16
PS490106-4-4 ........................D-16
PS490107-4-4 ........................D-16
PS490110-4-4 ........................D-16
PS4901JM-4-4........................D-17
PS490202-4-4 ........................D-17
PS490203-4-4 ........................D-17
PS490205-4-4 ........................D-18
PS490206-4-4 ........................D-18
PS490207-4-4 ........................D-18
PS490210-4-4 ........................D-18
PS4902JM-4-4........................D-19
PS490302-4-4 ........................D-19
PS490303-4-4 ........................D-19
PS490305-4-4 ........................D-20
PS490306-4-4 ........................D-20
PS490307-4-4 ........................D-20
III-5
Part No.
Page
PS490310-4-4 ........................D-20
PS4903JM-4-4........................D-21
PS490502-4-4 ........................D-21
PS490503-4-4 ........................D-21
PS490505-4-4 ........................D-21
PS490506-4-4 ........................D-22
PS490507-4-4 ........................D-22
PS490510-4-4 ........................D-22
PS4905JM-4-4........................D-22
PS491002-4-4 ........................D-23
PS491003-4-4 ........................D-23
PS491005-4-4 ........................D-23
PS491006-4-4 ........................D-23
PS491007-4-4 ........................D-23
PS491010-4-4 ........................D-24
PS4910JM-4-4........................D-24
PS49JM02-4-4........................D-24
PS49JM03-4-4........................D-24
PS49JM05-4-4........................D-25
PS49JM06-4-4........................D-25
PS49JM07-4-4........................D-25
PS49JM10-4-4........................D-25
PS49JMJM-4-4.......................D-25
PS4A-RPR..............................D-26
PS4-RPR ................................D-26
PS4W-RPR.............................D-26
PS4Y-RPR ..............................D-26
PS610102-6-6 ..........................D-6
PS610103-6-6 ..........................D-6
PS610106-6-6 ..........................D-6
PS610110-6-6 ..........................D-7
PS6101JM-6-6..........................D-7
PS610202-6-6 ..........................D-7
PS610203-6-6 ..........................D-8
PS610206-6-6 ..........................D-8
PS610210-6-6 ..........................D-8
PS6102JM-6-6..........................D-8
PS610302-6-6 ..........................D-9
PS610303-6-6 ..........................D-9
PS610306-6-6 ..........................D-9
PS610310-6-6 ........................D-10
PS6103JM-6-6........................D-10
PS610502-6-6 ........................D-10
PS610503-6-6 ........................D-11
PS610506-6-6 ........................D-11
PS610510-6-6 ........................D-11
PS6105JM-6-6........................D-11
PS611002-6-6 ........................D-12
PS611003-6-6 ........................D-12
PS611006-6-6 ........................D-12
PS611010-6-6 ........................D-12
PS6110JM-6-6........................D-13
PS61JM02-6-6........................D-13
PS61JM03-6-6........................D-13
PS61JM06-6-6........................D-13
PS61JM10-6-6.........................D14
PS61JMJM-6-6 ........................D14
PS690102-6-6 ........................D-15
PS690103-6-6 ........................D-15
PS690105-6-6 ........................D-16
PS690106-6-6 ........................D-16
PS690107-6-6 ........................D-16
PS690110-6-6 ........................D-16
PS6901JM-6-6........................D-17
PS690202-6-6 ........................D-17
PS690203-6-6 ........................D-17
PS690205-6-6 ........................D-18
PS690206-6-6 ........................D-18
PS690207-6-6 ........................D-18
PS690210-6-6 ........................D-18
PS6902JM-6-6........................D-19
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Appendices
Appendices
Alpha Numeric Index
Appendices
Appendices
Part No.
Page
PS690302-6-6 ........................D-19
PS690303-6-6 ........................D-19
PS690305-6-6 ........................D-20
PS690306-6-6 ........................D-20
PS690307-6-6 ........................D-20
PS690310-6-6 ........................D-20
PS6903JM-6-6........................D-21
PS690502-6-6 ........................D-21
PS690503-6-6 ........................D-21
PS690505-6-6 ........................D-21
PS690506-6-6 ........................D-22
PS690507-6-6 ........................D-22
PS690510-6-6 ........................D-22
PS6905JM-6-6........................D-22
PS691002-6-6 ........................D-23
PS691003-6-6 ........................D-23
PS691005-6-6 ........................D-23
PS691006-6-6 ........................D-23
PS691007-6-6 ........................D-23
PS691010-6-6 ........................D-24
PS6910JM-6-6........................D-24
PS69JM02-6-6........................D-24
PS69JM03-6-6........................D-24
PS69JM05-6-6........................D-25
PS69JM06-6-6........................D-25
PS69JM07-6-6........................D-25
PS69JM10-6-6........................D-25
PS69JMJM-6-6.......................D-25
PS6A-RPR..............................D-26
PS6-RPR ................................D-26
PS6W-RPR.............................D-26
PS6Y-RPR ..............................D-26
PS810102-8-8 ..........................D-6
PS810103-8-8 ..........................D-6
PS810106-8-8 ..........................D-6
PS810110-8-8 ..........................D-7
PS8101JM-8-8..........................D-7
PS810202-8-8 ..........................D-7
PS810203-8-8 ..........................D-8
PS810206-8-8 ..........................D-8
PS810210-8-8 ..........................D-8
PS8102JM-8-8..........................D-8
PS810302-8-8 ..........................D-9
PS810303-10-10 ......................D-9
PS810303-8-8 ..........................D-9
PS810306-8-8 ..........................D-9
PS810310-8-8 ........................D-10
PS8103JM-10-10....................D-10
PS8103JM-8-8........................D-10
PS810502-8-8 ........................D-10
PS810503-10-10 ....................D-11
PS810503-8-8 ........................D-11
PS810506-8-8 ........................D-11
PS810510-8-8 ........................D-11
PS8105JM-10-10....................D-11
PS8105JM-8-8........................D-11
PS811002-8-8 ........................D-12
PS811003-8-8 ........................D-12
PS811006-8-8 ........................D-12
PS811010-8-8 ........................D-12
PS8110JM-8-8........................D-13
PS81JM02-8-8........................D-13
PS81JM03-10-10....................D-13
PS81JM03-8-8........................D-13
PS81JM06-8-8........................D-13
PS81JM10-8-8.........................D14
PS81JMJM-8-8 ........................D14
PS890102-8-8 ........................D-15
PS890103-8-8 ........................D-15
PS890105-8-8 ........................D-16
PS890106-8-8 ........................D-16
Part No.
Page
PS890107-8-8 ........................D-16
PS890110-8-8 ........................D-16
PS8901JM-8-8........................D-17
PS890202-8-8 ........................D-17
PS890203-8-8 ........................D-17
PS890205-8-8 ........................D-18
PS890206-8-8 ........................D-18
PS890207-8-8 ........................D-18
PS890210-8-8 ........................D-18
PS8902JM-8-8........................D-19
PS890302-8-8 ........................D-19
PS890303-10-10 ....................D-19
PS890303-8-8 ........................D-19
PS890305-8-8 ........................D-20
PS890306-8-8 ........................D-20
PS890307-8-8 ........................D-20
PS890310-8-8 ........................D-20
PS8903JM-10-10....................D-21
PS8903JM-8-8........................D-21
PS890502-8-8 ........................D-21
PS890503-10-10 ....................D-21
PS890503-8-8 ........................D-21
PS890505-8-8 ........................D-21
PS890506-8-8 ........................D-22
PS890507-8-8 ........................D-22
PS890510-8-8 ........................D-22
PS8905JM-10-10....................D-22
PS8905JM-8-8........................D-22
PS891002-8-8 ........................D-23
PS891003-8-8 ........................D-23
PS891005-8-8 ........................D-23
PS891006-8-8 ........................D-23
PS891007-8-8 ........................D-23
PS891010-8-8 ........................D-24
PS8910JM-8-8........................D-24
PS89JM02-8-8........................D-24
PS89JM03-10-10....................D-24
PS89JM03-8-8........................D-24
PS89JM05-8-8........................D-25
PS89JM06-8-8........................D-25
PS89JM07-8-8........................D-25
PS89JM10-8-8........................D-25
PS89JMJM-10-10...................D-25
PS89JMJM-8-8.......................D-25
PS8A-RPR..............................D-26
PS8-RPR ................................D-26
PS8W-RPR.............................D-26
PS8Y-RPR ..............................D-26
PSEMA3TA-*...........................F-10
PSEMA3TAS-* ........................F-10
PSPTA-* ..................................F-10
PSTA-* ....................................F-10
RF-251-4FP ............................A-19
RF-251-4HB............................A-19
RF-251-4MP ...........................A-19
RF-251-4PL ............................A-19
RF-251-6FP ............................A-19
RF-251-6HB............................A-19
RF-251-6MP ...........................A-19
RF-251-6PL ............................A-19
RF-251-8MP ...........................A-19
RF-251-8PL ............................A-19
RF-254-4FP ............................A-20
RF-254-4HB............................A-20
RF-254-4MP ...........................A-20
RF-254-4PL ............................A-20
RF-254-6FP ............................A-20
RF-254-6HB............................A-20
RF-254-6MP ...........................A-20
RF-254-6PL ............................A-20
RF-371-6FP ............................A-19
Part No.
Page
RF-371-6HB............................A-19
RF-371-6MP ...........................A-19
RF-371-6PL ............................A-19
RF-371-8FP ............................A-19
RF-371-8HB............................A-19
RF-371-8MP ...........................A-19
RF-371-8PL ............................A-19
RF-374-6FP ............................A-20
RF-374-6HB............................A-20
RF-374-6MP ...........................A-20
RF-374-6PL ............................A-20
RF-374-8FP ............................A-20
RF-374-8HB............................A-20
RF-374-8MP ...........................A-20
RF-374-8PL ............................A-20
RK-12E ...................................D-33
RK-12N...................................D-33
RK-12V ...................................D-33
RK-16E ...................................D-33
RK-16N...................................D-33
RK-16V ...................................D-33
RK-4/6E ..................................D-33
RK-4/6N..................................D-33
RK-4/6V ..................................D-33
RK-8E .....................................D-33
RK-8N.....................................D-33
RK-8V .....................................D-33
S2101-12-12...........................D-29
S2101-4-4...............................D-29
S2101-6-6...............................D-29
S2101-8-8...............................D-29
S2102-12-12...........................D-29
S2102-4-4...............................D-29
S2102-6-6...............................D-29
S2102-8-8...............................D-29
S2103-12-12...........................D-29
S2103-16-16...........................D-29
S2103-4-4...............................D-29
S2103-6-6...............................D-29
S2103-8-8...............................D-29
S2107-12-12...........................D-29
S2107-16-16...........................D-29
S2107-4-4...............................D-29
S2107-6-6...............................D-29
S2107-8-8...............................D-29
S2110-12-12...........................D-29
S2110-6-6...............................D-29
S2110-8-8...............................D-29
S22 .........................................A-13
S2201-12-12...........................D-30
S2201-4-4...............................D-30
S2201-6-6...............................D-30
S2201-8-8...............................D-30
S2202-12-12...........................D-30
S2202-4-4...............................D-30
S2202-6-6...............................D-30
S2202-8-8...............................D-30
S2203-12-12...........................D-30
S2203-16-16...........................D-30
S2203-4-4...............................D-30
S2203-6-6...............................D-30
S2203-8-8...............................D-30
S2207-12-12...........................D-30
S2207-16-16...........................D-30
S2207-4-4...............................D-30
S2207-6-6...............................D-30
S2207-8-8...............................D-30
S2210-12-12...........................D-30
S2210-6-6...............................D-30
S2210-8-8...............................D-30
S23 .........................................A-13
III-6
Part No.
Page
S2301-12-12...........................D-31
S2301-4-4...............................D-31
S2301-6-6...............................D-31
S2301-8-8...............................D-31
S2302-12-12...........................D-31
S2302-4-4...............................D-31
S2302-6-6...............................D-31
S2302-8-8...............................D-31
S2303-10-10...........................D-31
S2303-12-12...........................D-31
S2303-16-16...........................D-31
S2303-4-4...............................D-31
S2303-6-6...............................D-31
S2303-8-8...............................D-31
S2307-12-12...........................D-31
S2307-4-4...............................D-31
S2307-6-6...............................D-31
S2307-8-8...............................D-31
S2310-12-12...........................D-31
S2310-6-6...............................D-31
S2310-8-8...............................D-31
S2501-12-12...........................D-32
S2501-6-6...............................D-32
S2501-8-8...............................D-32
S2502-12-12...........................D-32
S2502-6-6...............................D-32
S2502-8-8...............................D-32
S2503-10-10...........................D-32
S2503-12-12...........................D-32
S2503-16-16...........................D-32
S2503-6-6...............................D-32
S2503-8-8...............................D-32
S2507-12-12...........................D-32
S2507-16-16...........................D-32
S2507-6-6...............................D-32
S2507-8-8...............................D-32
S2510-12-12...........................D-32
S2510-6-6...............................D-32
S2510-8-8...............................D-32
S2-ACV-02-FP ..........................C-5
S2-ACV-02-MP .........................C-5
S2-ACV-03-BHB .......................C-5
S2-ACV-03-HB..........................C-5
S2-ACV-04-BHB .......................C-5
S2-ACV-04-FP ..........................C-5
S2-ACV-04-HB..........................C-5
S2-ACV-04-MP .........................C-5
S2-ANS-02-FP..........................C-6
S2-ANS-02-MP.........................C-6
S2-ANS-03-BHB.......................C-6
S2-ANS-03-HB .........................C-6
S2-ANS-04-BHB.......................C-6
S2-ANS-04-FP..........................C-6
S2-ANS-04-HB .........................C-6
S2-ANS-04-MP.........................C-6
S2-ANV-02-FP ..........................C-7
S2-ANV-02-MP .........................C-7
S2-ANV-03-BHB .......................C-7
S2-ANV-03-HB .........................C-7
S2-ANV-04-BHB .......................C-7
S2-ANV-04-FP ..........................C-7
S2-ANV-04-HB .........................C-7
S2-ANV-04-MP .........................C-7
S2-APV-02-FP ..........................C-5
S2-APV-03-HB..........................C-5
S2-APV-04-FP ..........................C-5
S2-APV-04-HB..........................C-5
S2C.........................................A-11
S2-PCV-02-FP ..........................C-5
S2-PCV-02-MP .........................C-5
S2-PCV-03-BHB .......................C-5
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Alpha Numeric Index
Part No.
Page
S2-PCV-03-HB .........................C-5
S2-PCV-04-BHB .......................C-5
S2-PCV-04-FP ..........................C-5
S2-PCV-04-HB .........................C-5
S2-PCV-04-MP .........................C-5
S2-PNS-02-FP..........................C-6
S2-PNS-02-MP.........................C-6
S2-PNS-03-BHB.......................C-6
S2-PNS-03-HB .........................C-6
S2-PNS-04-BHB.......................C-6
S2-PNS-04-FP..........................C-6
S2-PNS-04-HB .........................C-6
S2-PNS-04-MP.........................C-6
S2-PNV-02-FP ..........................C-7
S2-PNV-02-MP .........................C-7
S2-PNV-03-BHB .......................C-7
S2-PNV-03-HB .........................C-7
S2-PNV-04-BHB .......................C-7
S2-PNV-04-FP ..........................C-7
S2-PNV-04-HB .........................C-7
S2-PNV-04-MP .........................C-7
S2-PPV-02-FP ..........................C-5
S2-PPV-03-HB..........................C-5
S2-PPV-04-FP ..........................C-5
S2-PPV-04-HB..........................C-5
S6-ACV-04-FP ..........................C-5
S6-ACV-04-HB..........................C-5
S6-ACV-04-MP .........................C-5
S6-ACV-06-FP ..........................C-5
S6-ACV-06-HB..........................C-5
S6-ACV-06-MP .........................C-5
S6-ACV-08-FP ..........................C-5
S6-ACV-08-HB..........................C-5
S6-ACV-08-MP .........................C-5
S6-ANS-04-FP..........................C-6
S6-ANS-04-HB .........................C-6
S6-ANS-04-MP.........................C-6
S6-ANS-06-FP..........................C-6
S6-ANS-06-HB .........................C-6
S6-ANS-06-MP.........................C-6
S6-ANS-08-FP..........................C-6
S6-ANS-08-HB .........................C-6
S6-ANS-08-MP.........................C-6
S6-ANV-04-FP ..........................C-7
S6-ANV-04-HB .........................C-7
S6-ANV-04-MP .........................C-7
S6-ANV-06-FP ..........................C-7
S6-ANV-06-HB .........................C-7
S6-ANV-06-MP .........................C-7
S6-ANV-08-FP ..........................C-7
S6-ANV-08-HB .........................C-7
S6-ANV-08-MP .........................C-7
S6-KCV-04-FP ..........................C-5
S6-KCV-04-HB .........................C-5
S6-KCV-04-MP .........................C-5
S6-KCV-06-FP ..........................C-5
S6-KCV-06-HB .........................C-5
S6-KCV-06-MP .........................C-5
S6-KCV-08-FP ..........................C-5
S6-KCV-08-HB .........................C-5
S6-KCV-08-MP .........................C-5
S6-KNV-04-FP ..........................C-7
S6-KNV-04-HB .........................C-7
S6-KNV-04-MP .........................C-7
S6-KNV-06-FP ..........................C-7
S6-KNV-06-HB .........................C-7
S6-KNV-06-MP .........................C-7
S6-KNV-08-FP ..........................C-7
S6-KNV-08-HB .........................C-7
S6-KNV-08-MP .........................C-7
S6-PCV-04-FP ..........................C-5
Part No.
Page
S6-PCV-04-HB .........................C-5
S6-PCV-04-MP .........................C-5
S6-PCV-06-FP ..........................C-5
S6-PCV-06-HB .........................C-5
S6-PCV-06-MP .........................C-5
S6-PCV-08-FP ..........................C-5
S6-PCV-08-HB .........................C-5
S6-PCV-08-MP .........................C-5
S6-PNS-04-FP..........................C-6
S6-PNS-04-HB .........................C-6
S6-PNS-04-MP.........................C-6
S6-PNS-06-FP..........................C-6
S6-PNS-06-HB .........................C-6
S6-PNS-06-MP.........................C-6
S6-PNS-08-FP..........................C-6
S6-PNS-08-HB .........................C-6
S6-PNS-08-MP.........................C-6
S6-PNV-04-FP ..........................C-7
S6-PNV-04-HB .........................C-7
S6-PNV-04-MP .........................C-7
S6-PNV-06-FP ..........................C-7
S6-PNV-06-HB .........................C-7
S6-PNV-06-MP .........................C-7
S6-PNV-08-FP ..........................C-7
S6-PNV-08-HB .........................C-7
S6-PNV-08-MP .........................C-7
SAE-500 .................................B-22
SAF-500..................................B-22
SC-690 ..........................F-15, F-16
SCA-1/2-EMA-3 .....F-9, F-15, F-25
SCA-1/2-EMA-3-S.....F-9, F-15, F-25
SCA-7/16-EMA-3 ......................F-5
SCC-110 ...................................F-5
SCC-120 ...................................F-5
SCDA-150........................F-9, F-10
SCDA-410 ...............................F-15
SCDA-KIT-152...........................F-9
SCG-022..........................F-9, F-15
SCJA-1/4...................................F-5
SCJR-0250-4MP.......................F-5
SCJR-0250-EMA ......................F-5
SCJR-0250-PD .........................F-5
SCJR-5800-4MP.......................F-5
SCJR-5800-EMA ......................F-5
SCJR-5800-PD .........................F-5
SCJR-8700-4MP.......................F-5
SCJR-8700-EMA ......................F-5
SCJR-8700-PD .........................F-5
SCK-102-02-02..............F-15, F-16
SCK-102-02-08 .........................F-9
SCK-102-03-12 .......................F-15
SCK-102-05-02 .......................F-15
SCK-108-03-18 .........................F-9
SCK-313-02-31..............F-15, F-16
SCM-150-1-01 .................F-9, F-10
SCM-150-1-02 .................F-9, F-10
SCM-150-TM ............................F-9
SCM-350-1-01 ...............F-15, F-16
SCM-450-1-01 ...............F-15, F-16
SCMA-VADC-250 ...................F-15
SCPR-KIT-150...........................F-9
SCRPM-210..............................F-9
SCRPM-220............................F-15
SCRPMA-001 ..................F-9, F-15
SCRPMA-002 ..................F-9, F-15
SCSN-450 .......................F-9, F-15
SCSW-400.....................F-15, F-16
SCT-150-74-02........................F-15
SCT-150-74-08 ..................F-8, F-9
SCTA-1/4 .........................F-9, F-15
SH12-62L..................................B-8
Part No.
Page
SH12-62N .................................B-8
SH12-62-T20 ............................B-8
SH12-62-T24 ............................B-8
SH12-63L..................................B-8
SH12-63N .................................B-8
SH12-63-T20 ............................B-8
SH12-63-T24 ............................B-8
SH1-62......................................B-7
SH1-62-T4 ................................B-7
SH1-63......................................B-7
SH1-63-T4 ................................B-7
SH2016-62................................B-8
SH2016-63................................B-8
SH2020-62................................B-8
SH2020-63................................B-8
SH2024-62................................B-8
SH2024-63................................B-8
SH2-62......................................B-7
SH2-62-T6 ................................B-7
SH2-63......................................B-7
SH2-63-T6 ................................B-7
SH2C ........................................A-6
SH2C-E.....................................A-6
SH3-62......................................B-7
SH3-62-T8 ................................B-7
SH3-63......................................B-7
SH3-63-T8 ................................B-7
SH3C ........................................A-6
SH3C-E.....................................A-6
SH4-62......................................B-7
SH4-62-T10 ..............................B-7
SH4-63......................................B-7
SH4-63-T10 ..............................B-7
SH6-62......................................B-7
SH6-62-T12 ..............................B-7
SH6-63......................................B-7
SH6-63-T12 ..............................B-7
SH67E-62K...............................B-8
SH67E-63K...............................B-8
SH67F-62K ...............................B-8
SH67F-63K ...............................B-8
SH67G-62K ..............................B-8
SH67G-63K ..............................B-8
SH67J-62K ...............................B-8
SH67J-63K ...............................B-8
SH8-62......................................B-7
SH8-62-T16 ..............................B-7
SH8-63......................................B-7
SH8-63-T16 ..............................B-7
SH8C ........................................A-7
SH9C ........................................A-7
SM-251-4FB ...........................B-13
SM-251-4FP ...........................B-13
SM-251-6FB ...........................B-13
SM-251-6FO ...........................B-13
SM-251-6FP ...........................B-13
SM-252-4FB ...........................B-13
SM-252-4FP ...........................B-13
SM-252-6FB ...........................B-13
SM-252-6FO ...........................B-13
SM-252-6FP ...........................B-13
SM-501-12FB .........................B-13
SM-501-12FP .........................B-13
SM-501-8FB ...........................B-13
SM-501-8FO ...........................B-13
SM-501-8FP ...........................B-13
SM-502-12FB .........................B-13
SM-502-12FP .........................B-13
SM-502-8FB ...........................B-13
SM-502-8FO ...........................B-13
SM-502-8FP ...........................B-13
III-7
Part No.
Page
SM-751-12FB .........................B-13
SM-751-12FO .........................B-13
SM-751-12FP .........................B-13
SM-751-16FB .........................B-13
SM-751-16FO .........................B-13
SM-751-16FP .........................B-13
SM-752-12FB .........................B-13
SM-752-12FO .........................B-13
SM-752-12FP .........................B-13
SM-752-16FB .........................B-13
SM-752-16FO .........................B-13
SM-752-16FP .........................B-13
SMA3-200 ...............................F-25
SMA3-2000 .............................F-25
SMA3-400........................F-5, F-25
SMA3-4000 .............................F-25
SMA3-800 ...............................F-25
SSH12-62LY .............................B-8
SSH12-62NY ............................B-8
SSH12-62Y-T20 ........................B-8
SSH12-62Y-T24 ........................B-8
SSH12-63LY .............................B-8
SSH12-63NY ............................B-8
SSH12-63Y-T20 ........................B-8
SSH12-63Y-T24 ........................B-8
SSH1-62Y.................................B-7
SSH1-62Y-T4 ............................B-7
SSH1-63Y.................................B-7
SSH1-63Y-T4 ............................B-7
SSH2016-62Y...........................B-8
SSH2016-63Y...........................B-8
SSH2020-62Y...........................B-8
SSH2020-63Y...........................B-8
SSH2024-62Y...........................B-8
SSH2024-63Y...........................B-8
SSH2-62Y.................................B-7
SSH2-62Y-T6 ............................B-7
SSH2-63Y.................................B-7
SSH2-63Y-T6 ............................B-7
SSH3-62Y.................................B-7
SSH3-62Y-T8 ............................B-7
SSH3-63Y.................................B-7
SSH3-63Y-T8 ............................B-7
SSH4-62Y.................................B-7
SSH4-62Y-T10 ..........................B-7
SSH4-63Y.................................B-7
SSH4-63Y-T10 ..........................B-7
SSH6-62Y.................................B-7
SSH6-62Y-T12 ..........................B-7
SSH6-63Y.................................B-7
SSH6-63Y-T12 ..........................B-7
SSH67E-62KY ..........................B-8
SSH67E-63KY ..........................B-8
SSH67F-62KY ..........................B-8
SSH67F-63KY ..........................B-8
SSH67G-62KY..........................B-8
SSH67G-63KY..........................B-8
SSH67J-62KY...........................B-8
SSH67J-63KY...........................B-8
SSH8-62Y.................................B-7
SSH8-62Y-T16 ..........................B-7
SSH8-63Y.................................B-7
SSH8-63Y-T16 ..........................B-7
SSPD242Y..............................F-19
SSPD343Y..............................F-19
SST-1 ......................................B-54
SST-2 ......................................B-54
SST-3 ......................................B-54
SST-4 ......................................B-54
SST-6 ......................................B-54
SST-8 ......................................B-54
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Appendices
Appendices
Alpha Numeric Index
Appendices
Appendices
Part No.
Page
SST-1M ...................................B-54
SST-2M ...................................B-54
SST-3M ...................................B-54
SST-4M ...................................B-54
SST-6M ...................................B-54
SST-8M ...................................B-54
SST-N1....................................B-55
SST-N1M.................................B-55
SST-N2....................................B-55
SST-N2M.................................B-55
SST-N3....................................B-55
SST-N3M.................................B-55
SST-N4....................................B-55
SST-N4M.................................B-55
SST-N6....................................B-55
SST-N6M.................................B-55
SST-N8....................................B-55
SST-N8M.................................B-55
ST-N1 ......................................B-55
ST-N1M ...................................B-55
ST-N2 ......................................B-55
ST-N2M ...................................B-55
ST-N3 ......................................B-55
ST-N3M ...................................B-55
ST-N4 ......................................B-55
ST-N4M ...................................B-55
ST-N6 ......................................B-55
ST-N6M ...................................B-55
ST-N8 ......................................B-55
ST-N8M ...................................B-55
TC-371....................................B-46
TC-372....................................B-46
TL-251-4FP.............................A-32
TL-251-4MP............................A-32
TL-251-6MP............................A-32
TL-254-2FP.............................A-32
TL-254-2MP............................A-32
TL-254-4FP.............................A-32
TL-254-4HB ............................A-32
TL-254-4MP............................A-32
TL-254-6HB ............................A-32
TL-501-12FP...........................A-32
TL-501-6FP.............................A-32
TL-501-6MP............................A-32
TL-501-8FP.............................A-32
TL-501-8MP............................A-32
TL-504-12MP..........................A-32
TL-504-4FP.............................A-32
TL-504-4HB ............................A-32
TL-504-4MP............................A-32
TL-504-6FP.............................A-32
TL-504-6HB ............................A-32
TL-504-6MP............................A-32
TL-504-8HB ............................A-32
TL-504-8MP............................A-32
TR-37 ............................B-60, B-62
UC-251-4FP............................A-26
UC-251-4MP...........................A-26
UC-251-6FP............................A-26
UC-251-6MP...........................A-26
UC304F-4 ...............................A-26
UC-304M-4 .............................A-26
UC-340F-6 ..............................A-26
UC340M-6 ..............................A-26
0C ...........................................A-11
0E ...........................................A-11
0F............................................A-11
1095-0020...............................A-32
1095-0040...............................A-32
1096-0010...............................A-32
1097-0010...............................A-32
Part No.
Page
1098-0010...............................A-32
1141-62...................................B-47
1141-63...................................B-47
1163-60...................................B-56
1163-61...................................B-56
1261-0020...............................A-32
14............................................A-10
14-5B ......................................A-10
14-5BP....................................A-10
1461-0050...............................A-32
1461-0070...............................A-32
1462-0040...............................A-32
1462-0100...............................A-32
14-6B ......................................A-10
14C .........................................A-10
14F..........................................A-10
15............................................A-10
15C .........................................A-10
15F..........................................A-10
16 ..................................A-10, A-13
16-5B.............................A-10, A-13
16-5BP ..........................A-10, A-13
16-6B.............................A-10, A-13
16-6BP ..........................A-10, A-13
16-7B.............................A-10, A-13
16E................................A-10, A-13
16G ...............................A-10, A-13
17 ..................................A-10, A-13
17E................................A-10, A-13
17G ...............................A-10, A-13
1C ...........................................A-11
1E ...........................................A-11
1F............................................A-11
2047-0010...............................A-32
2123-0030...............................A-32
24............................................A-13
24-5B ......................................A-13
24-5BP....................................A-13
24-6B ......................................A-13
24C .........................................A-13
24F..........................................A-13
25............................................A-13
25C .........................................A-13
25F..........................................A-13
2C ...........................................A-11
2C-E........................................A-11
2E ...........................................A-11
2F............................................A-11
3005-2.....................................B-62
3005-3.....................................B-62
3009-2.....................................B-62
3009-3.....................................B-62
3010-2.....................................B-45
3010-3.....................................B-45
3010-3-230 .............................B-45
3050-2.....................................B-45
3050-3.....................................B-45
3050-3-231 .............................B-45
3060-0109...............................A-32
3061-0109...............................A-32
308..........................................A-41
3080-0020...............................A-32
3081-0020...............................A-32
310..........................................A-41
310-1/2....................................A-41
310-3/8....................................A-41
310-5/16..................................A-41
311..........................................A-41
311-3/8....................................A-41
314..........................................A-41
314-3/8....................................A-41
Part No.
Page
314-5/16..................................A-41
318..........................................A-41
318-1/2....................................A-41
318-1/4....................................A-41
322..........................................A-41
322-3/4....................................A-41
322-3/8....................................A-41
330-C3 ....................................A-41
330-C5 ....................................A-41
330-C6 ....................................A-41
332-E10 ..................................A-41
332-E6 ....................................A-41
332-E7 ....................................A-41
332-E8 ....................................A-41
3613001..................................B-50
3C ...........................................A-11
3C-E........................................A-11
3E ...........................................A-11
3F............................................A-11
4010-2P ..................................B-17
4010-3P.........................B-17, B-19
4010-6P ..................................B-17
4010-T6 ..................................B-17
4050-15...................................B-17
4050-15P ................................B-17
4050-16...................................B-17
4050-16P ................................B-17
4050-29BSPP .........................B-17
4050-2P ..................................B-17
4050-2P-T8M..........................B-17
4050-3P ..................................B-17
4050-4.....................................B-17
4050-4P ..................................B-17
4050-5.....................................B-17
4050-5P ..................................B-17
4050-6P ..................................B-17
4050P-T6 ................................B-17
4050-T6 ..................................B-17
410..........................................A-42
410-N ......................................A-42
410-S ......................................A-42
410-SV....................................A-42
4110-5.....................................B-17
4118005..................................B-11
4118006..................................B-11
4118007....................................B-8
4128002....................................B-8
4138001..................................B-11
4148001....................................B-8
4148002..................................B-11
4150-5.....................................B-17
4158001....................................B-8
415-N ......................................A-42
415-S ......................................A-42
4250-15...................................B-19
4250-15P ................................B-19
4250-3P ..................................B-19
4250-4.....................................B-19
4250-4P ..................................B-19
50001-010-0010 .......................B-55
50001-013-0010 ........................B-8
50001-015-0010 ........................B-8
50001-110-0010 ......................B-55
50001-112-0010 ............B-11, B-55
50001-113-0260 ......................B-17
50001-115-0010 ......................B-11
50001-116-0260 ............B-17, B-19
50001-116-0010 ........................B-8
50001-123-0010 ......................B-11
50001-124-0010 ........................B-8
50001-126-0010 ......................B-11
III-8
Part No.
Page
50001-133-0010 ........................B-8
50001-138-0260 ........................B-8
50001-211-0260..B-17,B-19,B-41,B-43
50001-211-0010 ......................B-11
50001-212-0010 ......................B-55
50001-213-0010 ........................B-8
50001-214-0010 ......................B-55
50001-217-0010 ......................B-55
50001-218-0260 ......................B-17
50001-218-0010 ........................B-8
50001-221-0010 ......................B-55
50001-222-0010 ........................B-8
50001-224-0010 ........................B-8
50001-234-0260 ........................B-8
50001-327-0010 ......................B-55
50001-333-0010 ........................B-8
50005-211-0202.....................B-39
5001-215-0010 .......................B-17
5005-4.....................................B-61
5009-4.....................................B-61
50-140-4 .................................B-11
5050-4.....................................B-43
5205-2M..................................B-61
5205-3.....................................B-61
5205-4M ........................B-60, B-61
5205-5.....................................B-61
5205-6.....................................B-61
5209-2M..................................B-61
5209-3.....................................B-61
5209-4M.........................B-6-, B-61
5209-5.....................................B-61
5209-6.....................................B-61
5E ...........................................A-11
5EP .........................................A-11
5F............................................A-11
6100-08...................................B-36
6100-12...................................B-36
6100-16...................................B-36
6100-20...................................B-36
6100-24...................................B-36
6105-08...................................B-37
6105-12...................................B-37
6105-16...................................B-37
6105-20...................................B-37
6105-24...................................B-37
6107-08...................................B-37
6107-16...................................B-37
6107-20...................................B-37
6107-24...................................B-37
6108-08...................................B-61
6108-16...................................B-61
6108-20...................................B-61
6108-24...................................B-61
6109-08...................................B-61
6109-16...................................B-61
6109-20...................................B-61
6109-24...................................B-61
6110-08...................................B-36
6110-12...................................B-36
6110-16...................................B-36
6110-20...................................B-36
6110-24...................................B-36
6115-08...................................B-37
6115-12...................................B-37
6115-16...................................B-37
6115-20...................................B-37
6115-24...................................B-37
6120-08...................................B-36
6120-12...................................B-36
6120-16...................................B-36
6120-20...................................B-36
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Appendices
Page
6120-24...................................B-36
6125-08...................................B-37
6125-12...................................B-37
6125-16...................................B-37
6125-20...................................B-37
6125-24...................................B-37
6130-08...................................B-36
6130-12...................................B-36
6130-16...................................B-36
6130-20...................................B-36
6130-24...................................B-36
6135-08...................................B-37
6135-12...................................B-37
6135-16...................................B-37
6135-20...................................B-37
6135-24...................................B-37
6601-12-10 .............................B-11
6601-12-12 .............................B-11
6601-16-16 .............................B-11
6601-2-4 .................................B-11
6601-4-4 .................................B-11
6601-6-6 .................................B-11
6601-8-10 ...............................B-11
6602-12-10 .............................B-11
6602-12-12 .............................B-11
6602-16-16 .............................B-11
6602-2-4 .................................B-11
6602-4-4 .................................B-11
6602-6-6 .................................B-11
6602-8-10 ...............................B-11
6608-10-10 .............................B-11
6608-12-10 .............................B-11
6608-12-12 .............................B-11
6608-16-16 .............................B-11
6608-6-6 .................................B-11
6608-8-10 ...............................B-11
6610-10-10 .............................B-11
6610-12-10 .............................B-11
6610-12-12 .............................B-11
6610-16-16 .............................B-11
6610-6-6 .................................B-11
6610-8-10 ...............................B-11
6657-12M................................B-60
6657-16M................................B-60
6659-12M................................B-60
6659-16M................................B-60
7820123..................................B-50
8010-15........B-17, B-19, B-39, B-41, B-43
8010-15P........B-17, B-19, B-39, B-41
8010-15P-DC ..................B-17, B-19
8010-16 ..........B-17, B-39, B-41, B-43
8010-16P ..............B-17, B-39, B-41
8010-29BSPP .........................B-17
8010-4....B-17, B-19, B-39, B-41, B-43
8010-4P ......B-17, B-19, B-39, B-41
8010-4P-DC ..................B-17, B-19
8010-5.....................................B-17
8010-5P ..................................B-17
8050-0110...............................A-32
8052-0319...............................A-32
8250-15...................................B-39
8250-16...................................B-39
8250-4.....................................B-39
8278-0050...............................A-32
8624-0070...............................A-32
8787-0040...............................A-32
8788-0030...............................A-32
8C ...........................................A-11
8CP.........................................A-11
9250-15-320 ...........................B-41
Part No.
Page
Part No.
Page
Part No.
Page
9250-16-320 ...........................B-41
9250-334.................................B-41
9250-4-320 .............................B-41
9250-6-320 .............................B-41
9507-4-1 .................................B-62
9C ...........................................A-11
9CP.........................................A-11
Appendices
Part No.
III-9
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Glossary of Terms
Appendices
Air Inclusion: The ambient atmosphere forced into the system
during the connection of the quick disconnect halves.
Pressure Impulse Test: Subjecting a component to a
specified pressure at a specified rate of increase or decrease
for a specified time limit.
Break-Away: Automatic disconnection of a coupling when an
axial separation force is applied.
Pressure Operating: The pressure at which a system
is operated.
Brinelling: Dimples or grooves worn into the shoulder of a
male half by the locking balls in the female half.
Pressure Plug: Plug which incorporates a seal capable of
withstanding the rated pressures on the female half.
Burst Pressure: The pressure at which a device loses the
capability to retain pressure.
Proof Pressure: The non-destructive test pressure in excess
of the maximum rated operating pressure.
Case Hardening: Hardening the surface of low carbon steel..
Push To Connect (Auto Lock): Locking arrangement which
permits one handed connection by pushing the nipple into
the coupler.
Cold Flow: Continued deformation under load.
Connect Under Pressure: Ability to connect coupling
halves with internal line pressure applied to either both sides
or one side.
Rated Pressure: The maximum pressure at which a product is
designed to operate.
Coupling, Female Half: Other nomenclature “coupler”,
“socket”, “body”.
Single-Acting Sleeve: Permits pull-to-disconnect convenience
on implement line when female body is clamp mounted.
Making connection requires manually pulling female body
forward, inserting male tip, then allowing body and tip to return
to original position in the clamp.
Coupling, Male Half: Other nomenclature “nipple”,
“plug”, “adapter”.
Coupling, Quick Disconnect: A component which can
quickly join or separate a fluid line without the use of tools or
special devices.
Sleeve Lock: Arrangement which provides an additional
lock which must be actuated before the locking sleeve can
be retracted.
Differential Pressure (∆P): The difference in pressure
between any two points of a system or a component.
Spillage: The fluid removed from the system due to
disconnection of a coupling assembly. This is the fluid trapped
between the mating seal and the valve seal of the coupling
halves.
Double-Acting Sleeve: Permits push-to-connect and pull-todisconnect convenience on implement line when female half is
clamp mounted and connected with a hose.
Surge Pressure: The pressure existing from surge conditions.
Dust Cap: Dust or dirt repelling enclosure for both halves.
Surge Flows: A rapid increase in fluid flow.
Dust Plug: Dust or dirt repelling enclosure both halves.
Thermal Build-Up: Hydraulic pressure caused by
expansion of the fluid due to heat from an external source such
as sunlight.
Flow Checking: Occurs when a nipple valve closes during
flow conditions, such as when quickly lowering a heavy
implement. (Also called Check Off, Back Checking or Lock-up.)
Trapped Pressure: Pressurized hydraulic fluid trapped behind
closed coupling valve
Appendices
Flush Position (Valve): When the coupler valve is fully open,
allowing maximum oil flow.
Twist Lock: A locking arrangement which requires a rotational
actuation to unlock the mating halves.
Force to Connect: Axial and/or rotational force required to
make a complete connection.
Force to Disconnect: The reverse of the above.
Types of Quick Disconnect Coupling Valves
Straight-Thru (ST): This provides straight through flow.
Induction Hardening: Localized hardening of medium
carbon steel.
Double Shut-off Valve (DSO): A valve in the female half and a
valve in the male half.
Peak Pressure: Maximum momentary pressure encountered
in the operation of a component.
Single Shut-off Valve (SSO): Generally, a valve in the female
half with no valve in the male half.
Pressure Cap: Cap which incorporates a seal capable of
withstanding the rated pressures on the male half.
NOTE: Refer to Parker’s Publication No. 3800-B1.0: Safety Guide for Selecting
and Using Quick Action Couplings and Related Accessories.
IV-1
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Offer of Sale
Appendices
The items described in this document are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its
authorized distributors. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Conditions.
Buyer’s order for any item described in its document, when communicated to Parker Hannifin Corporation, its subsidiary or an authorized
distributor (“Seller”) verbally or in writing, shall constitute acceptance of this offer.
1. Terms and Conditions of Sale: All descriptions, quotations, proposals, offers,
acknowledgments, acceptances and sales of Seller’s products are subject to and shall
be governed exclusively by the terms and conditions stated herein. Buyer’s acceptance
of any offer to sell is limited to these terms and conditions. Any terms or conditions
in addition to, or inconsistent with those stated herein, proposed by Buyer in any acceptance
of an offer by Seller, are hereby objected to. No such additional, different or inconsistent terms and conditions shall become part of the contract between Buyer and
Seller unless expressly accepted in writing by Seller. Seller’s acceptance of any offer
to purchase by Buyer is expressly conditional upon Buyer’s assent to all the terms and
conditions stated herein, including any terms in addition to, or inconsistent with those
contained in Buyer’s offer. Acceptance of Seller’s products shall in all events constitute
such assent.
8. Buyer’s Property: Any designs, tools, patterns, materials, drawings, confidential
information or equipment furnished by the Buyer or any other items which become Buyer’s
property, may be considered obsolete and may be destroyed by Seller after two (2)
consecutive years have elapsed without Buyer placing an order for the items which
are manufactured using such property. Seller shall not be responsible for any loss or
damage to such property while it is in Seller’s possession or control.
9. Taxes: Unless otherwise indicated on the face hereof, all prices and charges are
exclusive of excise, sales, use, property, occupational or like taxes which may be imposed
by any taxing authority upon the manufacture, sale or delivery of the items sold
hereunder. If any such taxes must be paid by Seller or if Seller is liable for the
collection of such tax, the amount thereof shall be in addition to the amounts for the
items sold. Buyer agrees to pay all such taxes or to reimburse Seller therefore upon
receipt of its invoice. If Buyer claims exemption from any sales, use or other tax
imposed by any taxing authority, Buyer shall save Seller harmless from and against
any such tax, together with any interest or penalties thereon which may be assessed
if the items are held to be taxable.
2. Payment: Payment shall be made by Buyer net 30 days from the date of delivery
of the items purchased hereunder. Amounts not timely paid shall bear interest of 1%
for each month or a portion thereof that Buyer is late in making payment. Any claims
by Buyer for omissions or shortages in a shipment shall be waived unless Seller receives
notice thereof within 30 days after Buyer’s receipt of the shipment.
10. Indemnity For Infringement of Intellectual Property Rights: Seller shall have
no liability for infringement of any patents, trademarks, copyrights, trade dress, trade
secrets or similar rights except as provided in this Part 10. Seller will defend and indemnify
Buyer against allegations of infringement of U.S. patents. U.S. trademarks, copyrights,
trade dress and trade secrets (hereinafter ‘Intellectual Property Rights’). Seller will defend
at its expense and will pay the cost of any settlement or damages awarded in an action
brought against Buyer based on an allegation that an item sold pursuant to this
contract infringes the Intellectual Property Rights of a third party. Seller’s obligation
to defend and indemnify Buyer is contingent on Buyer notifying Seller within ten (10)
days after Buyer becomes aware of such allegations of infringement, and Seller
having sole control over the defense of any allegations or actions including all
negotiations for settlement or compromise. If an item sold hereunder is subject to a
claim that it infringes the Intellectual Property Rights of a third party, Seller may, at its
sole expense and option, procure for Buyer the right to continue using said item, replace
or modify said item so as to make it noninfringing, or offer to accept return of said item
and return the purchase price less a reasonable allowance for depreciation.
Notwithstanding the foregoing, Seller shall have no liability for claims of infringement
based on information provided by Buyer, or directed to items delivered hereunder for
which the designs are specified in whole or part by Buyer, or infringements resulting
from the modification, combination or use in a system of any item sold hereunder. The
foregoing provisions of this Part 10 shall constitute Seller’s sole and exclusive liability
and Buyer’s sole and exclusive remedy for infringement of Intellectual Property rights.
3. Delivery: Unless otherwise provided on the face hereof, delivery shall be made
F.O.B. Seller’s plant. Regardless of the method of delivery, however, risk of loss shall
pass to Buyer upon Seller’s delivery to a carrier. Any delivery dates shown are
approximate only and Seller shall have no liability for any delays in delivery.
4. Warranty: Seller warrants that the items sold hereunder shall be free from defects
in material or workmanship for a period of 365 days from the date of shipment to Buyer.
THIS WARRANTY COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMS PROVIDED HEREUNDER. SELLER MAKES NO OTHER WARRANTY,
GUARANTEE, OR REPRESENTATION OF ANY KIND WHATSOEVER. ALL OTHER
WARRANTIES, INCLUDING BUT NOT LIMITED TO, MERCHANTIBILITY AND
FITNESS FOR PURPOSE, WHETHER EXPRESS, IMPLIED, OR ARISING BY
OPERATION OF LAW,TRADE USAGE, OR COURSE OF DEALING ARE HEREBY
DISCLAIMED.
NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRANTIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY OR PARTIALLY,TO BUYER’S
DESIGNS OR SPECIFICATIONS.
5. Limitation Of Remedy: SELLER’S LIABILITY ARISING FROM OR IN ANY
WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACT SHALL BE
LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT OF THE ITEMS SOLD
OR REFUND OF THE PURCHASE PRICE PAID BY BUYER, AT SELLER’S SOLE
OPTION. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER,
INCLUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR IN ANY
WAY CONNECTED WITH THIS AGREEMENT OR ITEMS SOLD HEREUNDER,
WHETHER ALLEDGED TO ARISE FROM BREACH OF CONTRACT, EXPRESS OR
IMPLIED WARRANTY, OR IN TORT, INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARN OR STRICT LIABILITY.
If a claim is based on information provided by Buyer or if the design for an item delivered
hereunder is specified in whole or in part by Buyer, Buyer shall defend and indemnify
Seller for all costs, expenses or judgments resulting from any claim that such item infringes
any patent, trademark, copyright, trade dress, trade secret or any similar right.
6. Changes, Reschedules and Cancellations: Buyer may request to modify the designs
or specifications for the items sold hereunder as well as the quantities and delivery
dates thereof, or may request to cancel all or part of this order, however, no such requested
modification or cancellation shall become part of the contract between Buyer and Seller
unless accepted by Seller in a written amendment to this Agreement. Acceptance of
any such requested modification or cancellation shall be at Seller’s discretion, and shall
be upon such terms and conditions as Seller may require.
12. Entire Agreement/Governing Law: The terms and conditions set forth herein,
together with any amendments, modifications and any different terms or conditions
expressly accepted by Seller in writing, shall constitute the entire Agreement concerning
the items sold, and there are no oral or other representations or agreements which
pertain thereto.This Agreement shall be governed in all respects by the law of the State
of Ohio. No actions arising out of the sale of the items sold hereunder or this
Agreement may be brought by either party more than two (2) years after the cause
of action accrues.
7. Special Tooling: A tooling charge may be imposed for any special tooling, including
without limitation, dies, fixtures, molds and patterns, acquired to manufacture items
sold pursuant to this contract. Such special tooling shall be and remain Seller’s
property notwithstanding payment of any charges by Buyer. In no event will Buyer acquire
any interest in apparatus belonging to Seller which is utilized in the manufacture of
the items sold hereunder, even if such apparatus has been specially converted or adapted
for such manufacture and notwithstanding any charges paid by Buyer therefore.
Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise dispose
of any special tooling or other property in its sole discretion at any time.
V-1
Parker Hannifin Corporation
Quick Coupling Division
Minneapolis, MN 55427
Appendices
11. Force Majeure: Seller does not assume the risk of and shall not be liable for delay
or failure to perform any of Seller’s obligations by reason of circumstances beyond the
reasonable control of Seller (hereinafter ‘Events of Force Majeure’). Events of Force
Majeure shall include without limitation, accidents, acts of God, strikes or labor
disputes, acts, laws, rules or regulations of any government or government agency,
fires, floods, delays or failures in delivery of carriers or suppliers, shortages of
materials and any other cause beyond Seller’s control.
Parker Hannifin Corporation
6035 Parkland Blvd.
Cleveland, Ohio 44124-4141
Telephone: (216) 896-3000
Fax: (216) 896-4000
www.parker.com
About Parker Hannifin Corporation
Parker Hannifin is a leading global motion-control
company dedicated to delivering premier customer
service. A Fortune 500 corporation listed on the New
York Stock Exchange (PH), our components and
systems comprise over 1,400 product lines that control
motion in some 1,000 industrial and aerospace markets.
Parker is the only manufacturer to offer its customers
a choice of hydraulic, pneumatic, and electromechanical
motion-control solutions. Our Company has the largest
distribution network in its field, with over 7,500
distributors serving nearly 400,000 customers
worldwide.
Parker Hannifin Corporation
Parker’s Charter
To be a leading worldwide manufacturer of components
and systems for the builders and users of durable goods.
More specifically, we will design, market and manufacture products controlling motion, flow and pressure. We
will achieve profitable growth through premier customer
service.
Product Information
North American customers seeking product information,
the location of a nearby distributor, or repair services will
receive prompt attention by calling the Parker Product
Information Center at our toll-free number:
1-800-C-PARKER (1-800-272-7537).
In Europe, call:
00800-C-PARKER-H (00800-2727-5374).
The Aerospace Group is
a leader in the development,
design, manufacture and
servicing of control systems
and components for aerospace
and related high-technology
markets, while achieving
growth through premier
customer service.
The Climate & Industrial
Controls Group designs,
manufactures and markets
system-control and fluid-handling components and systems
to refrigeration, air-conditioning
and industrial customers
worldwide.
The Fluid Connectors Group
designs, manufactures and
markets rigid and flexible
connectors, and associated
products used in pneumatic
and fluid systems.
The Seal Group designs,
manufactures and distributes
industrial and commercial
sealing devices and related
products by providing
superior quality and total
customer satisfaction.
The Hydraulics Group
designs, produces and markets
a full spectrum of hydraulic components and systems to builders
and users of industrial and
mobile machinery and
equipment.
The Filtration Group
designs, manufactures and
markets quality filtration and
clarification products, providing
customers with the best value,
quality, technical support, and
global availability.
The Automation Group is
a leading supplier of pneumatic
and electromechanical components and systems to automation
customers worldwide.
The Instrumentation Group
is a global leader in the design,
manufacture and distribution of
high-quality critical flow
components for worldwide
process instrumentation,
ultra-high-purity, medical and
analytical applications.
Fluid Connectors Group
Sales Offices
Parker Hannifin Corporation
Quick Coupling Division
8145 Lewis Road
Minneapolis, MN 55427
(763) 525-4240
FAX (763) 544-3418
Parker Hannifin Rak S.A.
Quick Coupling Division
17, rue des Buchillons
Z.I. du Mont-Blanc B.P. 524
74112 Annemasse Cedex
France
Tel. 33 4 50 87 80 80
FAX 33 4 50 87 80 14
Your complete source for quality tube fittings,
hose and hose fittings, brass fittings and valves,
quick-disconnect couplings, and asssembly tools,
locally-available from a worldwide network of
authorized distributors.
Fittings & Couplings:
Available in inch and metric sizes covering SAE,
BSP, DIN, GAZ, JIS and ISO thread configurations,
manufactured from steel, stainless steel, brass,
aluminum, nylon and thermoplastic.
Hose, Tubing and Bundles:
Available in a wide variety of sizes and materials
including rubber, wire-reinforced thermoplastic,
hybrid and custom compounds.
Great Lakes Region
300 Parker Drive
Otsego, MI 49078
(616) 694-2550
FAX (616) 694-4614
Pacific Region
6458 N. Basin Ave.
Portland, OR 97217
(503) 283-1020
FAX (503) 283-2201
Cleveland Region
6035 Parkland Blvd.
Cleveland, OH 44124
(216) 896-3000
FAX (216) 896-4022
Southeast Region
125 East Meadowview Rd.
Greensboro, NC 27406
(336) 373-1761
FAX (336) 378-0913
Minneapolis Region
8145 Lewis Road
Minneapolis, MN 55044
(763) 513-3535
FAX (763) 544-3418
Southwest Region
800 South 4th Ave.
Mansfield, TX 76063
(817) 473-4431
FAX (817) 473-8078
Northeast Region
2605 Kruser Rd.
P.O. Box 8847
Trenton, NJ 08650
(609) 586-5151
FAX (609) 586-3149
CANADA
Parker Hannifin (Canada), Inc.
4635 Durham Road South
P.O. Box 158
Grimsby, Ontario L3M 4G4
(905) 945-2274
FAX (905) 945-3946
Worldwide Availability:
Parker operates Fluid Connectors manufacturing
locations and sales offices throughout North America,
South America, Europe and Asia-Pacific.
For information, contact the nearest
Regional Sales Office listed, or call toll-free
1-800-C-PARKER
(1-800-272-7537).
Parker Hannifin Corporation
Fluid Connectors Group
Quick Coupling Division
8145 Lewis Road
Minneapolis, MN 55427
www.parker.com/quickcouplings
Catalog 3800/USA
- 40M. 02/05 GRA MP