ASP-AUTO-T Restrike System for use with Electronic HID Ballasts Features

ASP-AUTO-T Restrike System for use with Electronic HID Ballasts Features
ASP-AUTO-T
Restrike System for use with
Electronic HID Ballasts
Features
• For use with electronic HID Ballasts and universal voltage (120-277V)
fluorescent ballasts. (Not for use with magnetic ballasts)
• Compact and simple to wire
The ASP-AUTO is a auxiliary lighting control that incorporates
a current sense circuit that automatically drives a fluorescent
ballast when the main HID lamp is extinguished. It has a built-in
timer to keep the auxiliary lamp on for 2-3 minutes during the
HID lamp warmup period.
• Measures the current drawn by the HID circuit rather than voltage across
the circuit allowing use with virtually any type of lamp or ballast circuit
• Operates on HID circuits from 39-450 watts
• Operates fluorescent systems up to 250W. Fluorescent Ballast must
also be Universal Voltage to work with this system.
• Non-arcing switches allow the ASP-AUTO-T to be used in
Class 1, Division II vapor tight fixtures
• High temperature, flameproof plastic enclosure, 90ºC maximum
surface temp rating
• Timed Version keeps Lamp illuminated for 2-3 minutes until HID lamp
reaches 25-50% brightness
• Patented Design
Wiring
120V Input
Electronic
HID Ballast
Com
White
HID
Lamp
Yellow
Black
Yellow
Red
FL Ballast
ASP-Auto-T
FL Lamps
Dimensions
12” leads, stripped 0.63”
3.83”
1.5”
.75” Threaded Nipple:
½”-NPS
MADE IN USA
Of Imported And Domestic Components
Specifications subject to change without notice.
Rev 7-15-14
Thomas Research Products • 1215 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement