1.
SNH-1011N English
CONNECTING THE CAMERA TO YOUR ROUTER
3) Enter requested information.
1) Connect the power adapter to the
camera.
4) Check “Agree to the terms and conditions”, and
tap <Register>.
• ID : Create user ID using letters, numbers and periods between
Quick Start
Guide
8 -14 characters.
2) Connect one end of the network cable
to your camera and the other to an
open port on your router.
• PW : Create password using letters and numbers except colons
and commas between 8-14 characters.
• Confirm Password : Checks whether your password is entered
Once setup is compete, you will no longer
3) The camera status LED will be red for
about one minute. When the camera
is ready for use, the status LED will
change to solid green.
J If your WiFi router supports WPS feature, refer to the user manual to connect
via WPS button.
If you have any questions or need help
installing your new product please contact
our free technical support.
Telephone : 1-877-349-3149
9am - 9pm EST, Monday - Friday
Internet : http://www.samsungsv.com/Support/Index
Related manual can be downloaded from
https://www.samsungsmartcam.com/web.
The SmartCam webpage and mobile menu may be subject to change
without prior notice.
• Name : Enter your name.
• E-mail : Email address is used to recover your account password.
2-2. ADDING YOUR CAMERA
Download the Samsung Smartcam App on to your
Search keywords for the application: “Samsung
SmartCam”, “Smartcam”, “SAMSUNG TECHWIN”, “TECHWIN”.
] for camera
2) Tap <Add Camera>.
3) Enter the camera password you created for this
camera and Tap <OK>.
When your smartphone is connected to the same
WiFi network as the camera, it will automatically
search for the camera.
6) Select your WiFi network and enter your WiFi
network password.
2) Tap <Sign up here>.
connect to the network.
7) Tap <OK> and unplug the network cable from
the camera and the router.
4) If the camera is not
detected, please enter
the camera serial number
manually.
Camera
Adapter
Network Cable
Double Sided
Tape
Screws /
Wall anchors
J Save the packaging for later use.
You will need the serial number found on the side of
the packaging.
Quick Start
Guide
Tap on [
] for more
information.
Warranty Card /
GPL License
PT01-001758A
2) Enter the <Camera password> for the camera
selected. This is the same camera password you
created at the time you registered the camera.
Check the <SAVE> option to save the camera
password. Within 20 seconds, it will start streaming.
Video loading time will vary depending on your
The camera LED will change from flashing blue to solid green within 30
seconds. This confirms the camera is connected to your WiFi network. You
can now unplug the camera and place the camera anywhere within your
wireless network range. If the camera LED did not change to solid green,
please contact our tech support at 1-877-349-3149.
8) Tap <Back> and select <Live> to see the video.
specify the sensitivity.
The higher the sensitivity is, the subtler motion/audio events will
be detected.
• Night Vision : Set the IR lighting.
Check <Night Vision> to set the camera to switch to the night vision mode automatically.
• Audio : Adjust the volume of the built-in microphone and speaker of the camera as
appropriate.
3) Configure the notification.
• Push Notification : Check to receive push notification to your
phone.
• YouTube : Tap [
4) Tap on <Network setting>.
5) Turn WiFi on.
2) Configure the basic camera settings.
• Event Alarm : Specify whether to trigger the alarm or not, and
internet connection.
3) Select the camera found and tap <next>.
Android phone or your iPhone.
1) From the camera list, tap on the [
options.
1) Tap <General setting>.
camera when you have more than one. i.e., Living room, Kitchen,
Bedroom.
new camera>.
2-3. CONNECTING CAMERA TO WI-FI NETWORK
™ General setting
• Camera Name : Camera name is used to easily identify the
If you want to add another camera, Tap <Register
• Other WiFi Networks : Enter the SSID name and password to
Make sure all following items are in the packaging:
1) Tap on the camera icon [ ] to view live video.
Tap on the arrow icon [ ] for camera options.
6) Tap <Go To Camera List>.
2) Tap on <Setup> icon.
1) Run the downloaded application.
UNPACKING
characters between 1 to 8 without any space.
Example: 1234
1) Log-in.
2-1. SETTING UP YOUR ACCOUNT FROM MOBILE PHONE
Create camera password using alphanumeric
2-4. VIEWING LIVE VIDEO
correctly.
need the network cable and the camera will connect to your WiFi network.
Thank you for purchasing the Samsung
SmartCam Wifi Home Security Camera.
Follow the simple steps in this guide to set
up and start using your new SmartCam.
5) Create the <Camera password> and <Camera
Name>, and then tap <Add>.
2-5. CAMERA SETUP
] to enter your YouTube account information
to upload 30 video clips to your YouTube account when event is
detected.
• Picasa : Tap [
Tap the <Setup> icon to
configure a camera to be
monitored.
] to enter your Picasa account information to
upload a picture to your Picasa account when event is detected.
4) Tap <Apply>.
™ Time setting
1) Tap <Time setting>.
2) Set the camera’s clock.
• Time Zone : Select your region.
• Summer Time : Check this option if you live in a country or
region where DST(Daylight Saving Time) is applied.
3-1. SETTING UP YOUR ACCOUNT FROM COMPUTER
1) From your PC, launch your web browser.
Supported browsers: Internet Explorer 8+,
Chrome, FireFox, Safari
2) Go to http://www.samsungsmartcam.com.
3) Click <Starting SmartCam>.
3) Select the serial number of the camera
to be added from the camera search
list.
If the camera is not found, enter the
serial number manually.
The computer and the camera has to be on the same network router to
auto detect the cameras.
4) Click <Next>.
You need to install your plug in to
automatically search for cameras connected
to the network and view the video in your camera.
4) Create user ID between 8 to 14
alphanumeric character. You can use
letters, numbers and periods.
5) Create <Camera Name> and <Camera
password>.
Create camera password using
alphanumeric characters between 1 to 8
without any space. Example: 1234
4) Click <OK>.
5) Unplug the network cable from the
camera and the router.
The camera LED will turn from flashing
blue to solid green in 30 seconds. This
confirms the camera is connected to your wireless network. You can now
unplug and place the camera anywhere within your wireless network
range. If the camera LED did not turn solid green, please contact our tech
support at 1-877-349-3149.
6) Confirm Password.
3-3. CONNECTING CAMERA TO WI-FI NETWORK
1) After adding the camera, click <Yes>
in the wireless network setup pop-up
window.
3-4. VIEWING LIVE VIDEO
1) Click <Go To My SmartCam>.
7) Enter rest of the requested information and click <Sign Up>.
™ Picasa
Automatically uploads a image to your private Picasa account.
3) Click <Access Twitter>.
1) Select the Google.
2) Check <Use> of Picasa.
4) Enter the Twitter ID and password.
3) Enter your Gmail address and password.
3-5. ALARM & NOTIFICATION
1) Click <Setup>.
2) Select the <Alarm & Notification> tab.
If your Google email ID and password are saved, check the use of Picasa only.
4) Click <Save>.
J The Picasa account information of the user is
the same as the YouTube account.
™ Gmail
The event alarm is sent through Gmail.
6) Click <Finish> if the <Finish> button is
activated.
6) Click <Next>.
5) Create password between 8 to 14
alphanumeric character. You can use letters, numbers, periods and
commas between 8-14 characters.
4) When viewing the camera for the first
time, you must install the web viewer
plug-in. Please click on the <Download
Plug-in> and install the plug-in.
Browser will be restarted and you have
to re-login to your account.
5) Click <Authorize app>.
3-7. ALARM SCHEDULE SETTING
3) Check <Motion Sensitivity> for motion
detection.
Check <Audio Sensitivity> for audio detection.
1) Select the Google.
1) Click <Setup>.
2) Check <Use> of Gmail.
2) Click the <Alarm Schedule> tab.
4) Adjust the sensitivity.
3) Enter your Gmail address and password.
3) Select <Only Scheduled Time>.
Select the time slot to enable detection.
5) Configure the alarm receipt method.
J Configure Gmail account and password first to use YouTube/Picasa/Gmail.
If your Google email ID and password are
saved, check the use of Gmail only.
4) Click <Apply>.
4) Click <Save>.
3-6. ALARM RECEIPT SETTING
3-2. ADDING YOUR CAMERA
1) Click <Yes> in the pop-up window of
camera registration after completing
your member sign-up.
2) Click <Next> if the camera LED status
is solid green.
2) Select your Wireless Network from the
list.
2) Select a camera from the camera list at
the upper left hand of the screen.
If your Wireless Network is hidden, select
<Other Wi-Fi Networks (not listed)>.
3) Enter the password of your Wireless
Network and click <Next>.
Select <Display password> to display the password.
3) Enter the camera password and click
<Apply>.
J If you forget the camera password, it must be
reset.
Please refer to the user manual for details.
Check <Remember> to connect the camera without entering the camera
password.
™ YouTube
Automatically uploads 30 second clip to your private YouTube
account.
5) Select the <Time> tab.
5) Enter your Gmail address to receive the
notification e-mail and click <Add>.
1) Select the Google.
2) Check <Use> of YouTube.
3) Enter your Gmail address and password.
4) Click <Save to Google>.
J If you do not have a YouTube account, please go to YouTube.com and register
an account. The recorded videos are 30sec clips.
™ Twitter
When an event is detected, the notification message is sent to
the user’s Twitter account.
1) Select the Twitter.
2) Click <Request URL>.
6) Select the user’s time zone in <Time
Zone> and click <Apply>.