D1660 Series User's Guide
You will also find:
What's in the box?
Accessory handset
and charger
D1660 base with
cordless handset
Not pictured:
xx Rechargeable
battery (BT-1021)
xx Battery cover
xx AC adapter
(PS-0035)
If you purchased
model number:
D1660
D1660-2
Not pictured:
xx Rechargeable
battery (BT-1021)
xx AC adapter (PS-0035)
xx Telephone cord
D1660-11
D1660-12
...
...
Battery
cover
You should
have:
None
1 of each
10 of each
11 of each
* If the model number ends in R,
your package includes a DRX100
range extender. Refer to the
DRX100 user’s guide for details.
♦♦ If any items are missing or damaged, contact our Customer Care Line
immediately. Never use damaged products!
♦♦ Need help? Get answers 24/7 at our website: www.uniden.com.
If You...
Contact Uniden’s...
have a question or problem
Customer Care Line*
need a replacement part or an
accessory
need special assistance due to
a disability
Phone Number
817-858-2929 or
800-297-1023
Parts Department*
800-554-3988
Accessibility Help Line
800-874-9314
(voice or TTY)
* During regular business hours, Central Standard Time; see our website for detailed
business hours.
© 2010 Uniden America Corp.
Ft. Worth, Texas 76155
Printed in Vietnam
U01UN174BZZ(0)
What’s in the manual?
Getting Started................................... 3
Installing Your Phone..................................3
Getting to Know Your Phone....................4
Using the Handset Menu...........................6
Using Your Phone................................ 7
Using the Phonebook..................................9
Using Special Features....................... 9
Silent Mode.....................................................9
Multihandset Features............................. 10
Chain Dialing................................................11
Voice Message Notification.....................11
Important Information..................... 12
Solving Problems........................................12
Adapter and Battery Information.........15
Compliance Information..........................15
1-Year Limited Warranty...........................17
Important Safety Instructions!
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to
persons, including the following:
♦♦ This unit is NOT waterproof. DO NOT expose it to rain or moisture.
♦♦ Do not use this product near water, for example, near a bath tub, wash
bowl, kitchen sink or laundry tub, in a wet basement or near a swimming
pool.
♦♦ Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
♦♦ Do not use the telephone to report a gas leak in the vicinity of the leak.
♦♦ Use only the power cord and batteries indicated in this manual. Do not
dispose of batteries in a fire. They may explode. Check with local codes for
possible special disposal instructions.
♦♦ Do not place the handset in any charging cradle without the battery
installed and the battery cover securely in place.
SAVE THESE INSTRUCTIONS!
CAUTION! Risk of explosion if battery is replaced by an incorrect type!
Dispose of used batteries according to the instructions. Do not open or
mutilate the battery. Disconnect the battery before shipping this product.
For more details, see the Important Information section.
English - 2
Getting Started
Installing Your Phone
Charge the Battery
1. Unpack all handsets,
battery
packs, and
battery
covers. If
you need to
remove a
cover, press in on the notch and
slide the cover down and off.
2. Line up the battery connector
with the jack inside the handset;
the connector only fits one way.
3. Push the connector in until it
clicks into place; tug gently on the
wires to make sure the battery is
securely connected.
4. Replace the battery cover and
slide it into place.
5. Use an AC adapter to connect
the power jack on the base to a
regular indoor (120V AC) power
outlet. Connect any chargers the
same way.
6. Place a handset in the base with
the display facing forward. If the
display doesn’t light up, reseat the
handset or connect the base to
a different outlet. For 2 or more
handsets, place each handset in a
charger.
##Charge all handsets
completely (about 15 hours)
before using.
Connect the Telephone Cord
Use the telephone cord to connect
the TEL LINE jack on the base to a
standard telephone wall jack.
Test the Connection
1. Pick up the handset and press
Talk . The handset sounds a dial
tone, and the display shows Talk.
––If you don't hear a dial tone or
the display says Check Tel Line,
check the connection between
the base and the phone jack.
2. Make a quick test call. (Press End
to hang up.)
––If you keep hearing a dial tone,
change to pulse dialing.
––If there’s a lot of noise, check
for interference (see p. 13).
3. Test all handsets the same way. If
you can't get a dial tone, move the
handset closer to the base.
Changing to Pulse Dialing
Your phone uses tone dialing by
default. If your phone company uses
pulse dialing, you need to change
your phone’s dial mode.
1. Press Menu/select and choose
Global Setup.
2. Select Dial Mode then Pulse. You’ll
hear a confirmation tone.
To send DTMF tones during a call
(e.g., for an automated response
system), press * to temporarily
switch to tone dialing. When you
hang up, the phone automatically
returns to pulse dialing.
English - 3
Getting to Know Your Phone
Parts of the Base
Key
Find
hS
FIND HS
Charging
Contacts
Find
Handset
What it does
In standby: page all
handsets.
Parts of the Handset
UP
MENU/
SELECT END CID
Twelve-key INTERCOM/
dial pad
CLEAR
MESSAGE/
MUTE
Charging
contacts
Microphone
PHONEBOOK SPEAKER TALK/FLASH
Key (icon)
Phonebook
(
)
Talk/flash
)
Redial/pause
(
Up (
)
)
English - 4
REDIAL/PAUSE
What it does
xx In standby or during a call: open the phonebook.
xx In the menu: go back to the previous screen.
xx When entering text: move the cursor to the left.
) xx Switch a normal call to the speakerphone (and back).
Speaker (
Down (
DOWN
xx In standby: start a telephone call (get a dial tone).
xx During a call: switch to a waiting call.
xx In standby: decrease the ringer volume.
xx During a call: decrease the volume.
xx In any menu or list: move the cursor down one line.
xx In standby: open the redial list.
xx When entering a phone number: insert a 2-second pause.
xx In standby: increase the ringer volume.
xx During a call: increase the volume.
xx In any menu or list: move the cursor up one line.
Key (icon)
What it does
Menu/select
xx In standby: open the menu.
xx In any menu or list: select the highlighted item.
End
xx During a call: hang up.
xx In any menu or list: exit and go to standby.
CID
xx In standby or during a call: open the Caller ID list.
xx When entering text: move the cursor to the right.
Intercom/
clear
xx In standby: start an intercom call.
xx During a call: put the call on hold and start a call transfer.
xx When entering text or numbers: erase the character at the
cursor (press & hold to erase all characters).
Message/mute
(
)
xx In standby: access your voice mail service.
xx During a call: mute the microphone.
xx While the phone is ringing: ignore this call (mute the ringer).
Reading the Display
The table shows the possible status
icons & what they mean. Since the
icons appear based on what the
phone is doing, you won't see all the
icons at the same time.
Icon
Status
icons
Current
call info
Time &
date
CID record
status
What it means
The signal from the base is 1) strong or 2) weak.
The ringer is turned off and will not ring for new calls.
The speakerphone is on.
You have a voice message waiting.
Privacy Mode is on: no other handset can join the call.
T-coil mode is on (see p. 6).
The battery is 1) full, 2) half charged, 3) getting low or 4) empty.
The handset is using ECO (power save) mode.
[Aa] [aA] Enter 1) capital or 2) lower case letters (see p. 7).
English - 5
Using the Handset Menu
Press MENU/SELECT to
open the menu.
Handset Setup
Date & Time
Press
PHONEBOOK to
go back a screen
OR
press END to exit
the menu.
If you don't press any keys for about 30 seconds,
the handset exits the
menu.
During a call, use
Handset Setup
Phonebook to
back out of
T-coil
Handset Setup
Use UP and DOWN to
the menu
Tones Setup
rotate through the Ringer Handset
without
options.
Personal Ring hanging up.
Press MENU/SELECT to choose
the current option.
Handset Setup Menu
You can change these settings separately for each handset.
Menu Option
T-coil
Ringer Tones
Personal Ring
AutoTalk
Any Key Answer
Banner
Handset Language
Key Touch Tone
What it does
Turn on T-coil mode to reduce noise on hearing aids
equipped with a telecoil (T-coil) feature. T-coil mode
shortens talk time, so keep your battery fully charged.
Choose this handset's ring tone. As you highlight each
ring tone, the phone plays a sample. When you hear the
tone you want, press Menu/select.
Turn on personal ring so you can assign a special ring
tone to people in your phonebook. With Caller ID, this
handset uses the assigned tone when the person calls.
Have this handset answer a call when you pick it up
from the cradle (without pressing any buttons).
Have this handset answer a call when you press any key
on the 12-key dialpad.
Change the name used on the handset's display.
Change the display language.
Have the keypad sound a tone when you press a key.
Date & Time Menu
Use this menu to set the clock (if you have Caller ID, the phone sets date and
time automatically). Enter the date and time; select AM or PM. Use CID to
move the cursor past a digit without changing it.
English - 6
Global Setup Menu
The settings on this menu affect all handsets. Only one handset at a time can
change these menu options.
Menu Option
Dial Mode
Edit Voice Mail
Set Line Mode
Voice Mail Tone
VMWI Reset
What it does
Choose tone or pulse dialing (see p. 3).
Enter, edit, or delete the access number for voice mail
service (see p. 12).
Do not change this setting unless instructed to by
customer service.
Change the way your phone communicates with a
voice mail system (see p. 12).
Reset the Voice Message Waiting Indicator (see p. 12).
Entering Text on Your Phone
♦♦ Use the 12-key dial pad anytime you want to enter text into your phone (a
name in the phonebook, the handset banner, etc.).
♦♦ If two letters in a row use the same key, enter the first letter; wait for the
cursor to move to the next space and enter the second letter.
To...
enter a blank space
switch between upper and lower case letters
rotate through the punctuation and symbols
Press...
#.
*.
0.
Using Your Phone
This section explains the most common functions on the phone.
Using the
speakerphone
press Speaker.
make a call, dial the number & press Talk/flash.
press Speaker.
answer a call
press Talk/flash.
hang up
press End or put the handset in the cradle.
ignore a call/mute the ringer press Message/mute while the phone is ringing.
switch to the speaker & back press Speaker.
mute the microphone during press Message/mute (press again to turn the
microphone back on).
a call
put a call on hold
press Intercom/clear*.
press Speaker.
return to a call on hold
press Talk/flash.
To...
Using the earpiece
* After 5 minutes on hold, the call will be disconnected.
English - 7
Finding a Lost Handset
With the phone in standby, press Find HS on the base. All handsets beep for 1
minute; to cancel, press Find HS again or press any handset key.
Changing the Volume
You can adjust each handset’s volume independently. Press UP or DOWN to
increase or decrease the earpiece or speaker volume when you are on a call.
You can adjust the ringer volume only when the phone is in standby.
##Turning the ringer volume all the way down turns off the ringer.
Using the Caller ID and Redial Lists
Caller ID (CID) is a service available from your telephone provider that
shows the phone number (and sometimes the caller’s name) of incoming
calls. Contact your telephone provider for more information.
Caller ID list
Redial list
xx The phone saves the information for the last 50
xx Each handset
received calls to the CID list. The NEW icon marks any
remembers the
calls received since the last time you checked the list. last 5 numbers
you dialed on it.
xx All handsets share the same CID list so only one
handset can access the list at a time.
xx Only one handset
can access its
xx In standby, handsets show how many calls came in
redial list at a time.
since the last time you checked the CID list.
To…
Press...
open the lists CID to open the CID list or Redial/Pause to open the Redial list.
scroll
through the
lists
dial the
highlighted
number
close the lists
DOWN to scroll from newest to oldest.
UP to scroll from oldest to newest.
Talk/flash or speaker.
(CID record only) If the number is a toll call without 1 at the
beginning of the record, press * to add 1 before dialing.
Phonebook.
For individual record options, highlight a number and press Menu/select:
Delete Entry
Store Into Pb
Delete All
English - 8
Erase the number from the list.
Add the number to the phonebook. The handset prompts you
to edit the name and number and select a personal ring.
Erase all numbers from the list.
Using Call Waiting
♦♦ Call Waiting, a service available from your telephone provider, lets you
receive calls while you are on another call. Caller ID on Call Waiting
(CIDCW) service displays Caller ID information for a waiting call.
♦♦ If you get a Call Waiting call, the phone sounds a tone and displays any
CID information received from the waiting call. Press Talk/flash to switch
between the current call and the waiting call; each time you switch, there
is a short pause before you're connected to the other call.
Using the Phonebook
The phone can store up to 100 entries in its phonebook. All handsets share
the same phonebook, so only one handset can access it at a time.
To...
open/close the phonebook
scroll through the entries
jump to entries that start
with a certain letter
dial the current entry
edit the current entry
delete the current entry
Press...
Phonebook.
Down to scroll through the entries from A to Z.
Up to scroll from Z to A.
the number key corresponding to the letter
you want.
Talk/flash or Speaker.
Menu/select, then select Edit.
Menu/select, then select Delete. When the
phone prompts you to confirm, select Yes.
Adding Phonebook Entries
With the phone in standby, open the phonebook. Press Menu/select and select
Create New. Enter a name & number and select a personal ring.
♦♦ Enter the phone number (up to 20 digits) exactly as you would dial it.
♦♦ If you need the phone to wait before sending the next set of digits, press
Redial/pause to insert a 2-second pause. You can insert multiple pauses, but
each one counts as a digit (you’ll see P in the display).
Deleting All the Phonebook Entries
With the phone in standby, open the phonebook. Press Menu/select and select
Delete All. When the phone prompts you to confirm, select Yes.
Using Special Features
Silent Mode
You can silence the ringers on all handsets for a specific period of time.
English - 9
1. With the phone in standby, press and hold # on any handset. The phone
prompts you to select the number of hours (1 - 9 or Always On) that you
want it to stay in silent mode.
2. To confirm, press # or just wait about 5 seconds. The phone displays Silent
Mode On on each handset.
3. After the selected number of hours, the phone automatically exits silent
mode. To exit silent mode manually, press and hold # again.
Multihandset Features
##To use the features in this section, you need at least 2 handsets.
♦♦ Your base supports a total of 12 cordless handsets: the one that came with
the base and up to 11 DCX160 accessory handsets. Your base also supports
a total of 2 DRX100 range extenders, including any that came with your
phone.
♦♦ You must register accessory handsets to the base before using them.
(Handsets that came packaged with the base are already registered.)
♦♦ Handsets that aren’t registered display a Not Registered message. For
registration instructions, see p. 14, or see the accessory handset manual.
♦♦ If a handset was ever registered to a base, you must reset it before it can
register to a new base; see p. 14, or see the accessory handset manual.
Conference Calling
♦♦ When an outside call comes in, two cordless handsets and the base can
join in a conference call with the outside caller.
♦♦ To join a call that’s already in progress, just press Talk/flash on the
handset.
♦♦ To leave the conference call, hang up normally; the other stations remain
connected to the call.
Call Transfer
To...
Press...
Intercom/clear. The phone puts the call on hold and
prompts you to select the handset you want to page.
transfer a call
When the other handset accepts the call, you'll be
disconnected (press Talk/flash to rejoin the call).
cancel a transfer Talk/flash to return to the call.
Intercom/clear to answer the page and speak to the other
accept a
transferred call handset. Then, press Talk/flash to speak to the caller.
English - 10
Privacy Mode
♦♦ With a call in progress, press Menu/select twice to activate Privacy mode.
As long as privacy mode is on, you’ll see a in the display, and no other
handsets can join your call.
♦♦ Privacy mode turns off automatically when you hang up or put the call on
hold; you can also turn it off by pressing Menu/select twice.
Handset to Handset Intercom
♦♦ Whenever the phone is in standby, you can make an intercom call between
handsets without using the phone line.
♦♦ You can make an intercom call from any handset, but only two handsets
can be in an intercom call at any time.
♦♦ If an outside call comes in during an intercom page, the phone cancels the
page so you can answer the incoming call.
♦♦ If an outside call comes in during an intercom call, press Talk/flash to
hang up the intercom call and answer the outside call.
To...
make an intercom
page
cancel a page
answer a page
end an intercom call
Press...
Intercom/clear. Select the handset you want to talk
with, or All to page all handsets at the same time.
End.
Intercom/clear or Talk/flash.
End. Both handsets return to standby.
Chain Dialing
If you often have to enter a series of digits or a code number during a call,
you can save that code number to a phonebook entry and use the phonebook
to send the code number.
1. Make your call normally.
2. When you hear the prompt that tells you to enter the number, open the
phonebook and find the entry that contains your code number.
3. Press Menu/select to send the code. If you change your mind, just close the
phonebook.
Voice Message Notification
Using a Voice Mail Service
If you subscribe to a voice mail service, your phone can notify you when you
have a new message; you can also enter your access number and retrieve your
English - 11
messages with one key touch. Contact your voice mail provider for more
information.
Setting the Voice Mail Tone
The voice mail feature supports both Stutter Dial Tone (SDT) and
Frequency-Shift Keying (FSK) notification signals. With the phone in
standby, open the menu, and select Global Setup. Select Voice Mail Tone, and
choose Off if your service uses FSK signals; if your service uses SDT signals,
choose On.
Entering your Voice Mail Access Number
With the phone in standby, open the menu and select Global Setup.
Select Edit Voice Mail, then enter the access number (up to 20 digits) from
your voice mail service. If you need the phone to wait between parts of the
access number, press Redial/pause to insert a two-second pause. (You can
insert as many pauses as you want, but each pause counts as a digit.)
Press Menu/select when you’re finished; the phone overwrites any previouslysaved number.
Getting your Messages
When you have new messages,
appears in the display. Press Message/
mute; the phone automatically dials the saved access number.
Resetting the Message Icon
After you listen to your messages, the message icon turns off. If it doesn’t,
you can reset it: With the phone in standby, open the menu and select Global
Setup; select VMWI Reset, then select Yes.
Important Information
Solving Problems
If you have any trouble with your phone, check this section first. If you need
help, call our Customer Care Line listed on the front cover.
General problems
No handsets can make or
receive calls.
A handset can’t make or
receive calls.
English - 12
Possible solutions
xx Check the telephone cord connection.
xx Disconnect the base AC adapter for a few
minutes; then reconnect it.
xx Move the handset closer to the base.
General problems
A handset can make calls,
but it won’t ring.
A handset is not working.
The phone keeps ringing
when I answer on an
extension.
Audio issues
Callers sound
weak or soft.
There’s a lot of
noise or static
on the line
Possible solutions
xx Make sure the ringer is turned on.
xx Make sure Silent Mode is turned off (see p. 9).
xx Charge the battery for 15-20 hours.
xx Check the battery connection.
xx You may have to change the line mode.
Contact Customer Service for instructions.
Possible solutions
xx Move the handset closer to the base or Range Enhancer.
xx Keep the handset’s battery fully charged.
xx Increase the earpiece volume.
xx Check for interference from appliances (microwave
ovens, TVs, etc.) or wireless devices (baby monitors, WiFi
equipment, etc.). Move the handset or base away from
the interference source.
xx If you use a telecoil hearing aid, turn on T-coil mode).
xx If you have any service that uses the phone line, add a
DSL or telephone line filter (see p. 14).
Caller ID problems
Caller ID information
does not display.
Caller ID displays briefly
and then clears.
Possible solutions
xx Let calls ring twice before answering.
xx Make sure your Caller ID service is active.
xx You may have to change the line mode.
Contact Customer Service for instructions.
Multi-handset problems
I can’t transfer calls.
Two handsets can’t talk to a caller.
A handset says Unavailable.
I can’t register a new handset.
Possible solutions
xx Reset the handset (see p. 14).
xx See if any handset is in Privacy Mode.
xx Move the handset closer to the base.
xx See if any handset is in Privacy Mode.
xx Reset the handset (see p. 14).
xx See if you have 12 registered handsets.
Voice mail issues
The new message icon doesn’t turn on
when I have new messages.
Possible solutions
xx Adjust the Voice Mail Tone
setting (see p. 12).
English - 13
Voice mail issues
The new message icon doesn’t turn off
after I’ve listened to all my messages.
Possible solutions
xx Reset the Voice Message
Indicator (see p. 13).
Installing a Line Filter or DSL Filter
A telephone line filter or DSL filter prevents services that use the phone line
from causing interference on your phone. To get a line filter, contact your
service provider or look in an electronics store.
Plug the filter into the telephone wall jack and plug the base into the filter.
Make a test call to make sure the noise is gone.
Liquid Damage
CAUTION: If the base is covered in liquid, disconnect the adapter &
phone cord from the wall before touching it.
If the liquid is only on the exterior housing of the base or handset, wipe it off
and use as normal. If you can hear liquid inside the housing:
1. Remove all compartment covers, and disconnect all cables and cords.
2. If liquid is leaking from any vent or hole, turn the phone so that vent faces
down. If not, place the largest vent face down.
3. Let dry for at least 3 days. Check for liquid inside the phone before
replacing compartment covers & reconnecting cords.
Resetting Handsets
If you have trouble with a handset or if you want to replace one, clear the
registration information from the base and the handset:
1. Press & hold END and # at the same time until you see the System Reset
menu.
2. If you still have the base the handset is registered to, select Deregister
HS, then select the handset you want to reset. If you don’t have that base
anymore, select Base Unavailable.
3. To confirm, select Yes. The handset displays Handset not registered.
Registering Handsets
If you see a “not registered” message on a handset, you must register it to a
base before using it.
1. Place the handset in the base; the display should say Handset Registering.
2. Wait until the display says Registration Complete (about 30 seconds), then
pick up the handset and press TALK/FLASH.
English - 14
##If you don’t hear a dial tone
or the display says Registration
Failed, charge the battery
completely, then try again.
Adapter and Battery
Information
AC Adapter for Base and Charger
Part number
PS-0035
Input voltage
120V AC, 60 Hz
Output
8V AC @ 300mA
voltage
xxUse only the supplied AC adapters.
xxUse the proper adapter for the base & any
chargers.
xxDo not place the unit in direct sunlight or
subject it to high temperatures.
Battery pack (with normal use)
Part number
Capacity
Talk time
Standby time
Battery life
BT-1021
300mAh, 2.4V DC
about 7 hours
about 7 days
about 1 year
xxReplace the battery when the talk or
standby time becomes noticeably reduced.
For replacements, call the Parts Department (see the front cover).
xxWhen the battery gets low, the handset
beeps and shows a low battery alert;
recharge the battery.
Rechargeable Battery Warning
xxThis equipment contains a rechargeable
Nickel-Metal-Hydride (Ni-MH) battery.
xxNickel is a chemical known to the state of
California to cause cancer.
xxDo not short-circuit the battery.
xxThe batteries in this equipment may
explode if disposed of in a fire.
xxDo not charge the batteries in any charger
other than the one specified in the owner's
manual. Using another charger may damage the battery or cause it to explode.
xxAs part of our commitment to protecting
our environment and
conserving natural
resources, Uniden
voluntarily participates
in an RBRC® industry
program to collect and
recycle used Ni-MH
batteries within the United States. Please
call 1-800-8-BATTERY for information
on Ni-MH battery recycling in your area.
(RBRC® is a registered trademark of the
Rechargeable Battery Recycling
Corporation.)
Rechargeable batteries must be
recycled or disposed of properly.
Warning! The cords on this product
and/or accessories contain lead,
a chemical known to the state of
California to cause birth defects
or other reproductive harm. Wash
hands after handling.
Uniden works to reduce lead
content in our products &
accessories.
Compliance Information
FCC Part 68 Information
This equipment complies with Part 68 of
the FCC rules and the requirements adopted by the ACTA. On the bottom of this
equipment is a label that contains, among
other information, a product identifier
in the format US: AAAEQ##TXXXX. If
requested, this number must be provided
to the phone company.
An applicable Universal Service Order
Codes (USOC) certification for the jacks
used in this equipment is provided (i.e.,
RJ11C) in the packaging with each piece
of approved terminal equipment. A plug
and jack used to connect this equipment
to the premises wiring and telephone
network must comply with the applicable
FCC Part 68 rules and requirements
adopted by the ACTA. A compliant tele-
English - 15
phone cord and modular plug is provided
with this product. It is designed to be
connected to a compatible modular jack
that is also compliant. See installation
instructions for details.
The REN is used to determine the
number of devices that may be connected to a phone line. Excessive RENs
on a phone line may result in devices
not ringing in response to an incoming
call. In most but not all areas, the sum
of RENs should not exceed five (5.0). To
be certain of the number of devices that
may be connected to a line, as determined
by the total RENs, contact the telephone
provider. The REN for this product is
part of the product identifier that has the
format US:AAAEQ##TXXXX. The digits
represented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3).
If this equipment causes harm to the telephone network, the telephone company
will notify you in advance that temporary
discontinuance of service may be
required. But if advance notice isn't practical, the telephone company will notify
the customer as soon as possible. Also,
you will be advised of your right to file a
complaint with the FCC if you believe it
is necessary. The telephone company may
make changes in its facilities, equipment,
operations or procedures that could
affect the operation of the equipment.
If this happens the telephone company
will provide advance notice in order for
you to make necessary modifications to
maintain uninterrupted service.
Please follow instructions for repairing,
if any (e.g. battery replacement section);
otherwise do not substitute or repair any
parts of the device except as specified in
this manual. Connection to party line
service is subject to state tariffs. Contact
the state public utility commission, public
service commission or corporation commission for information. This equipment
is hearing aid compatible.
English - 16
If you experience trouble with this equipment, contact the manufacturer (see the
cover of this manual for contact information) or an authorized agent. If the equipment is causing harm to the telephone
network, the telephone company may
request that you disconnect the equipment until the problem is resolved.
If your home has wired alarm equipment
connected to a phone line, be sure that
installing the system does not disable your
alarm equipment. If you have questions
about what will disable alarm equipment,
contact your telephone company or a
qualified installer.
Any changes or modifications to this
product not expressly approved by the
manufacturer or other party responsible
for compliance could void your authority
to operate this product.
NOTICE: According to telephone company reports, AC electrical surges, typically resulting from lightning strikes, are
very destructive to telephone equipment
connected to AC power sources. To minimize damage from these types of surges,
a surge arrestor is recommended.
FCC Part 15 Information
This device complies with part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation. Privacy
of communications may not be ensured
when using this phone.
FCC PART 15.105(b): Note: This
equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try
to correct the interference by one or more
of the following measures:
xxReorient or relocate the receiving
antenna.
xxIncrease the separation between the
equipment and receiver.
xxConnect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
xxConsult the dealer or an experienced
radio/TV technician for help.
FCC RF Exposure Information
This product complies with FCC radiation exposure limits under the following
conditions:
xxThe base must be placed to allow a
minimum of 20 cm (8 inches) between the
antenna and all persons during normal
operation.
xxThe base must not be collocated or
operated in conjunction with any other
antenna or transmitter.
xxThe handset is designed for body-worn
operation and meets FCC RF exposure
guidelines when used with any belt clip,
carrying case, or other accessory supplied
with this product. (All necessary accessories are included in the package; any
additional or optional accessories are not
required for compliance with the guidelines.) Third party accessories (unless
approved by the manufacturer) should be
avoided as these might not comply with
FCC RF exposure guidelines.
Industry Canada (I.C.) Notice
Terminal equipment
NOTICE: This equipment meets the
applicable Industry Canada Terminal
Equipment Technical Specifications. This
is confirmed by the registration number.
The abbreviation IC before the registration number signifies that registration
was performed based on a Declaration
of Conformity indicating that Industry
Canada technical specifications were met.
It does not imply that Industry Canada
approved the equipment.
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is
marked on the equipment itself. The REN
assigned to each terminal equipment
provides an indication of the maximum
number of terminals allowed to be
connected to a telephone interface. The
termination on an interface may consist
of any combination of devices subject
only to the requirement that the sum of
the Ringer Equivalence Numbers of all
the devices does not exceed 5.
Radio equipment
The term IC before the radio certification number only signifies that Industry
Canada technical specifications were
met. Operation is subject to the following
two conditions: (1) this device may not
cause interference, and (2) this device
must accept any interference, including
interference that may cause undesired
operation of the device. "Privacy of communications may not be ensured when
using this telephone".
1-Year Limited Warranty
Evidence of original purchase is
required for warranty service.
WARRANTOR: UNIDEN AMERICA
CORPORATION ("Uniden")
ELEMENTS OF WARRANTY: Uniden
warrants, for one year, to the original
retail owner, this Uniden Product to
be free from defects in materials and
English - 17
craftsmanship with only the limitations or
exclusions set out below.
WARRANTY DURATION: This warranty
to the original user shall terminate and
be of no further effect 12 months after the
date of original retail sale. The warranty
is invalid if the Product is (A) damaged
or not maintained as reasonable or necessary, (B) modified, altered, or used as part
of any conversion kits, subassemblies, or
any configurations not sold by Uniden,
(C) improperly installed, (D) serviced or
repaired by someone other than an authorized Uniden service center for a defect
or malfunction covered by this warranty,
(E) used in any conjunction with equipment or parts or as part of any system not
manufactured by Uniden, or (F) installed
or programmed by anyone other than as
detailed by the owner's manual for this
product.
STATEMENT OF REMEDY: In the event
that the product does not conform to this
warranty at any time while this warranty
is in effect, warrantor will either, at its
option, repair or replace the defective unit
and return it to you without charge for
parts, service, or any other cost (except
shipping and handling) incurred by warrantor or its representatives in connection
with the performance of this warranty.
Warrantor, at its option, may replace the
unit with a new or refurbished unit. THE
LIMITED WARRANTY SET FORTH
ABOVE IS THE SOLE AND ENTIRE
WARRANTY PERTAINING TO THE
PRODUCT AND IS IN LIEU OF AND
EXCLUDES ALL OTHER WARRANTIES
OF ANY NATURE WHATSOEVER,
WHETHER EXPRESS, IMPLIED OR
ARISING BY OPERATION OF LAW,
INCLUDING, BUT NOT LIMITED
TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR
PROVIDE FOR THE REIMBURSEMENT
English - 18
OR PAYMENT OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES. Some
states do not allow this exclusion or
limitation of incidental or consequential
damages so the above limitation or exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives
you specific legal rights, and you may also
have other rights which vary from state
to state. This warranty is void outside the
United States of America and Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner's
manual you are certain that the Product
is defective, pack the Product carefully
(preferably in its original packaging). Disconnect the battery from the Product and
separately secure the battery in its own
separate packaging within the shipping
carton. The Product should include all
parts and accessories originally packaged
with the Product. Include evidence of
original purchase and a note describing
the defect that has caused you to return
it. The Product should be shipped freight
prepaid, by traceable means, to warrantor
at:
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
Minimum size: 0.375 in wide (9.525 mm)
Minimum drawing size (with clear space) = 0.555 in (14.1 mm) wide
As an Energy Star® Partner,
Uniden has determined that
this product meets the Energy
Star® guidelines for energy
efficiency. Energy Star® is a U.
S. registered mark.
xxUniden® is a registered trademark of
Uniden America Corporation.
xxThe pictures in this manual are for
example only. Your phone may not look
exactly like the pictures.