VDO SCREEN AND HEADLIGHT WASHER SYSTEMS V5.1 - Technical information

Handbook
On-line handbook
Select one of the following means of access to view your
handbook on-line...
This personal space offers advice and other useful information for
the care and maintenance of your vehicle.
Scan this code for direct access to your handbook.
Find your handbook on the Peugeot website, under
"MyPeugeot".
If the "MyPeugeot" function is not available on the Peugeot
public website for your country, you can find your handbook at the
following address:
http://public.servicebox.peugeot.com/ddb/
Select:
the language,
the vehicle, its body style,
the print edition of your handbook appropriate for the date of registration of
your vehicle.
Referring to the handbook on-line also gives you access to the latest information available, easily identified by the bookmark, associated with
this symbol:
Welcome
Thank you for choosing a 508, a symbol of
confidence, passion and inspiration
This handbook has been designed to help to make the most of your
508 in all circumstances and in complete safety.
Take the time to read through it so as to familiarise yourself with your
vehicle.
This handbook covers all of the variations in equipment available
across the whole 508 range.
Your vehicle will be fitted with only some of the equipment described
in this document, depending on its trim level, version and the
specification for the country in which it was sold.
The descriptions and illustrations are given as indications only.
Automobiles PEUGEOT reserves the right to modify the technical
characteristics, equipment and accessories without having to update
this edition of the handbook.
This document forms an integral part of your vehicle. Remember to
pass it on to the new owner in the event of the sale of the vehicle.
Key
Warning:
For any work on your vehicle, use a qualified workshop that has the
technical information, competence and equipment required, which a
PEUGEOT dealer is able to provide.
We draw your attention to the following points:
-The fitting of electrical equipment or accessories not listed by
PEUGEOT may cause faults and failures with the electrical
system of your vehicle. Contact a PEUGEOT dealer or a
qualified workshop for information on the range of recommended
accessories.
- Any modification or adaptation not intended or authorised by
Automobiles PEUGEOT or carried out without meeting the
technical requirements defined by the manufacturer would lead
to the suspension of the new vehicle warranty.
Information:
this symbol marks warnings which it is essential to observe for
your own safety, for the safety of others or to avoid any risk of
damaging your vehicle.
this symbol draws your attention to additional information for better
use of your vehicle.
Protection of the environment:
Page reference:
this symbol accompanies advice relating to protection of the
environment.
this symbol invites you to refer to the pages which provide details
of the function.
Contents
Overview
Eco-driving
.
.
Monitoring
Instrument panel
Indicator and warning lamps
Gauges and indicators
Trip computer
Touch screen
Setting the date and time
Access
Remote control key
41
Alarm52
Electric windows
54
Boot56
Motorised tailgate (SW)
57
Sunroof60
Panoramic sunroof (SW)
62
Fuel tank
63
Diesel misfuel prevention
64
Comfort
12
14
26
31
35
39
Front seats
66
71
Rear seats
Mirrors73
75
Steering wheel adjustment
Interior fittings
76
Boot fittings (Saloon)
79
Boot fittings (SW)
80
Heating and Ventilation
84
Manual air conditioning
87
Dual-zone digital air conditioning
89
Quad-zone digital air conditioning
92
Switching off the air conditioning may result
in some discomfort (humidity, misting).
93
Front demist - defrost
97
Rear screen demist - defrost
97
Programmable Heating / Ventilation
98
Driving
Starting-switching off the engine
Electric parking brake
Manual parking brake
Manual gearbox
Gear shift indicator
Automatic gearbox
Electronic gearbox
Stop & Start
Hill start assist
Head-up display
Blind spot sensors
Speed limiter
Cruise control
Parking sensors
Reversing camera
100
103
109
110
111
112
116
120
123
124
126
130
132
134
137
Visibility
Lighting controls
Automatic illumination of headlamps
Headlamp adjustment
Additional headlamps
Wiper controls
Automatic rain sensitive wipers
Courtesy lamps
Interior mood lighting
138
143
146
147
149
151
153
154
Contents
Child safety
Child seats
Deactivating the passenger's front airbag
ISOFIX child seats
Child lock
Practical information
155
158
164
170
Safety
Direction indicators
171
Emergency or assistance call
172
Horn172
Warning triangle
173
Tyre under-inflation detection
174
ESC system
176
Seat belts
179
Airbags182
Temporary puncture repair kit
186
Changing a wheel
192
Snow chains
199
Changing a bulb
200
Changing a fuse
207
12 V battery
211
Removing - refitting the battery
215
Energy economy mode
219
Changing a wiper blade
220
Towing the vehicle
221
Towing a trailer
223
Fitting roof bars
225
Very cold climate screen
226
Accessories227
Checks
Opening the bonnet
230
Running out of fuel (Diesel)
231
Petrol engines
232
Diesel engines
234
BlueHDi Diesel engines
236
Checking levels
237
Checks240
AdBlue ® additive and SCR system
(BlueHDi Diesel)
242
Technical data
Petrol engines
250
Petrol weights
252
Diesel engines
254
Diesel weights
258
Dimensions262
Identification markings
264
Audio equipment and telematics
Emergency or assistance
JBL equipment
7-inch touch screen
Audio system
265
267
269
341
Visual search
.
Alphabetical index
.
Overview
Exterior
Panoramic sunroof (SW)
Electronic key: Keyless
Entry and Starting
The glass roof makes the passenger compartment
brighter and is fitted with an electric blind.
This system allows you to unlock, lock
and start your vehicle while keeping
the key on your person and in the
recognition zone around the vehicle.
62
44, 101
Stop & Start
AdBlue® additive (BlueHDi Diesel engines)
This system puts the engine temporarily into
standby during stops in the traffic (red lights, traffic
jams, etc...). The engine restarts automatically as
soon as you want to move off. The Stop & Start
system reduces fuel consumption and exhaust
emissions, and offers the comfort of complete
silence when stationary.
This system uses a catalytic converter which turns up to 85% of
nitrous oxides (NOx) into nitrogen and water, harmless to health
and the environment.
The AdBlue ® additive is held in a tank located under the boot at
the rear of the vehicle.
Its capacity is 17 litres, which gives a driving range of
approximately 12 000 miles (20 000 km).
120
4
242
Overview
.
Exterior
Front and rear parking sensors
Motorised tailgate (SW)
This system provides a warning when
manoeuvring forwards and backwards by
detecting obstacles located in front of or behind
the vehicle.
This system provides motorised opening and
closing of the tailgate, by pressing a button.
57
134
Temporary puncture repair kit
This kit is a complete system consisting of a
compressor and a sealant cartridge, to allow
the temporary repair of a tyre.
186
5
Overview
Interior
Audio and communication
systems
Head-up display
These systems benefit from the latest
technology: MP3 compatible audio systems,
USB player, Bluetooth hands-free system,
satellite navigation system with colour screen,
auxiliary inputs, Hi-Fi audio system, ...
Touch screen
This system projects speed and cruise control/
speed limiter information onto a smoked strip
in the driver's field of vision, so that they do not
need to take their eyes off the road.
124
269
Audio system
341
If your vehicle is fitted with a
JBL Hi-Fi audio system, this
is designed specifically for the
passenger compartment of your
vehicle.
Refer to the "Audio and telematics" section.
Digital air conditioning
After setting the desired level of comfort, the
system then automatically controls this level
according to the ambient conditions.
Interior mood lighting
This subdued passenger compartment lighting
improves visibility inside the vehicle in low
lighting conditions.
154
Manual
87
Dual-zone
89
Quad-zone
92
6
Overview
.
Switch panels*
Deactivation of the DSC/ASR system.
178
Electric child lock.
170
Programmable heating warning lamp.
Lighting of the indicator lamp indicates the
state of the corresponding function.
Massage.
70
Adaptive lighting.
144
Alarm.
52
Blind spot monitoring.
126
98
Electric parking brake.
103
Starting/stopping using the electronic
key.
101
Opening the boot.
44, 56, 57
Deactivation of parking sensors.
135
Deactivation of Stop & Start.
122
Head-up display
(on/off, settings).
124
Opening the fuel filler flap.
63
* Depending on version.
7
Overview
Instruments and controls
1. Cruise control / speed limiter controls.
2. Headlamp height adjustment.
3. Lighting and direction indicator stalk
4. Instrument panel.
5. Driver's airbag.
Horn.
6.Gear lever.
7. 12 V accessory socket
USB port / auxiliary socket.
8. Bonnet release lever.
8
9.Fusebox.
10. Front door window demisting/defrosting
vent.
11. Windscreen demisting/defrosting vent.
12. Steering lock and starting with the key.
13. Starting using the electronic key.
14. Audio equipment steering wheel controls.
15. Wiper / screenwash / trip computer stalk.
16. Central locking and hazard warning
buttons.
17.Touch screen (depending on version).
18. Central adjustable air vents.
19. Passenger's airbag.
20. Side adjustable air vents.
21.Glove box / Passenger's airbag
deactivation.
22.Electric parking brake.
23. Central armrest with storage.
24.Storage.
25. Audio system.
26. Heating / air conditioning controls.
Overview
.
9
Eco-driving
Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
Optimise the use of your gearbox
Control the use of your electrical
equipment
With a manual gearbox, move off gently and change up without waiting.
During acceleration change up early.
Before moving off, if the passenger compartment is too warm, ventilate it
by opening the windows and air vents before using the air conditioning.
Above 30 mph (50 km/h), close the windows and leave the air vents
open.
Remember to make use of equipment that can help keep the
temperature in the passenger compartment down (sunroof and window
blinds...).
Switch off the air conditioning, unless it has automatic regulation, as
soon as the desired temperature is attained.
Switch off the demisting and defrosting controls, if not automatic.
Switch off the heated seat as soon as possible.
With an automatic or electronic gearbox, give preference to automatic
mode and avoid pressing the accelerator pedal heavily or suddenly.
The gear shift indicator invites you engage the most suitable gear: as
soon as the indication is displayed in the instrument panel, follow it
straight away.
For vehicles fitted with an electronic or automatic gearbox, this
indicator appears only in manual mode.
Switch off the headlamps and front foglamps when the level of light
does not require their use.
Drive smoothly
Maintain a safe distance between vehicles, use engine braking rather
than the brake pedal, and press the accelerator progressively. These
practices contribute towards a reduction in fuel consumption and CO2
emissions and also helps reduce the background traffic noise.
If your vehicle has cruise control, make use of the system at speeds
above 25 mph (40 km/h) when the traffic is flowing well.
10
Avoid running the engine before moving off, particularly in winter; your
vehicle will warm up much faster while driving.
As a passenger, if you avoid connecting your multimedia devices
(film, music, video game...), you will contribute towards limiting the
consumption of electrical energy, and so of fuel.
Disconnect your portable devices before leaving the vehicle.
Eco-driving
Limit the causes of excess consumption
Observe the recommendations on
maintenance
Spread loads throughout the vehicle; place the heaviest items in the
bottom of the boot, as close as possible to the rear seats.
Limit the loads carried in the vehicle and reduce wind resistance (roof
bars, roof rack, bicycle carrier, trailer...). Use a roof box in preference.
Remove roof bars and roof racks after use.
Check the tyre pressures regularly, when cold, referring to the label in
the door aperture, driver's side.
Carry out this check in particular:
- before a long journey,
- at each change of season,
- after a long period out of use.
Don't forget the spare wheel and the tyres on any trailer or caravan.
.
At the end of winter, remove snow tyres and refit your summer tyres.
Have your vehicle serviced regularly (engine oil, oil filter, air filter,
passenger compartment filter...) and observe the schedule of
operations recommended in the warranty and maintenance record.
When refuelling, do not continue after the third cut-off of the nozzle to
avoid any overflow.
At the wheel of your new vehicle, it is only after the first 1 800 miles
(3 000 kilometres) that you will see the fuel consumption settle down to
a consistent average.
11
Monitoring
Instrument panel
Dials and screens
1. Rev counter (x 1 000 tr/min or rpm),
graduation according to engine (petrol or
Diesel).
2.Engine oil temperature gauge.
3. Fuel gauge.
4.Engine coolant temperature gauge.
5. Speedometer (mph or km/h).
6. Cruise control or speed limiter settings.
7.Gear shift indicator for a manual gearbox
or gear lever position and gear for an
electronic or automatic gearbox.
12
Control buttons
8. Display zone: alert messages or state of
functions, trip computer.
9.Trip distance recorder (miles or km).
10. Automatic wipers
Service indicator
(miles or km) then,
total distance recorder.
These two functions are displayed
successively when switching on the
ignition.
A. Main lighting dimmer.
B. Display of alert log.
Recall of information:
● on servicing,
● on driving range for the emissions
control additive (AdBlue ®).
C. Reset the trip distance recorder.
Monitoring
Instrument panel screen
Main menu*
Vehicle parameters
1
Screen settings
1
Driving position setting
2
3
3
3
3
Choice of language
2
Unlocking boot only
Choice of units
2
Driving assistance
2
Choice of color schemes
2
Access to the vehicle
2
With the vehicle stationary, use the left hand
thumb wheel to move through the menus, so
as to configure the vehicle settings (driving and
comfort systems, ...).
-Press: Main menu, confirm the selection,
- Rotate (other than menu): scroll through
the list of active functions available,
- Rotate (in a menu): move up or down in the
menu.
1
3
Speeds memorised
3
Rear wipe in reverse gear
Fuel consumption
Temperature
Preheating / Preventilation
1
Parking brake automatic
2
Parameters
Lighting
2
3
3
3
Welcome lighting
Follow-me-home headlamps
Directional headlamps
* Depending on version.
13
Monitoring
Indicator and warning lamps
Associated warnings
Visual indicators informing the driver that a
system is in operation, switched off or has a
fault.
The switching on of certain warning lamps may
be accompanied by an audible signal and a
message in the instrument panel screen.
The warning lamps may come on continuously
(fixed) or flash.
When the ignition is switched on
Certain warning lamps come on for a few
seconds in the instrument panel and/or
instrument panel screen when the vehicle's
ignition is switched on.
When the engine is started, these same
warning lamps should go off.
If they remain on, before moving off, refer to the
information on the warning lamp concerned.
14
Certain warning lamps may come on in
one of two modes. Only by relating the
type of lighting to the operating status
of the vehicle can it be ascertained
whether the situation is normal or
whether a fault has occurred.
Monitoring
Operation indicator lamps
If one of the following indicator lamps comes on in the instrument panel and/or instrument panel screen, this confirms that the corresponding system has come into operation.
Warning / indicator lamp
State
Cause
Left-hand
direction
indicator
flashing with buzzer.
The lighting stalk is pushed down.
Right-hand
direction
indicator
flashing with buzzer.
The lighting stalk is pushed up.
Sidelamps
fixed.
The lighting stalk is in the
"Sidelamps" position.
Dipped beam
headlamps
fixed.
The lighting stalk is in the "Dipped
beam headlamps" position.
Main beam
headlamps
fixed.
The lighting stalk is pulled towards
you.
Pull the stalk to return to dipped beam headlamps.
Front foglamps
fixed.
The front foglamps are switched on.
Turn the ring on the stalk rearwards twice to switch off
the front foglamps.
Rear foglamps
fixed.
The rear foglamps are switched on.
Turn the ring on the stalk rearwards to switch off the
rear foglamps.
1
Action / Observations
For more information on the lighting controls, refer to the corresponding section.
15
Monitoring
Warning / indicator lamp
16
State
Cause
Action / Observations
Diesel engine
pre-heating
fixed.
The START/STOP switch has been
pressed (ignition on).
Wait until the warning lamp goes off before starting.
Once it goes off, starting is immediate, on condition
that the brake pedal remains pressed with an
automatic or electronic gearbox, or the clutch pedal is
pressed fully down with a manual gearbox.
The period of illumination of the warning lamp is
determined by the ambient conditions (up to about
thirty seconds in severe winter conditions).
If the engine does not start, switch the ignition off and
then on, wait until the warning lamp goes off again,
then start the engine.
Parking brake
fixed.
The parking brake is applied or not
properly released.
Release the parking brake to switch off the warning
lamp, keeping your foot on the brake pedal.
Observe the safety recommendations.
For further information on the parking brake, refer to
the "Parking brake" section.
Deactivation of
the automatic
functions of the
electric parking
brake
fixed.
The "automatic application" (on
switching off the engine) and
"automatic release" functions are
deactivated or faulty.
Activate the function (according to country) via the
vehicle configuration menu or contact a PEUGEOT
dealer or a qualified workshop if automatic
application / release is not possible.
For more information on the electric parking brake,
refer to the corresponding section.
Monitoring
Warning / indicator lamp
State
Cause
Action / Observations
Automatic
wiping
fixed.
The wiper control is pushed
downwards.
Automatic front wiping is activated.
To deactivate automatic wiping, operate the control
stalk downwards or put the stalk into another position.
Passenger's
airbag system
fixed in the seat belt
and passenger's front
airbag warning lamps
display.
The control switch, located in the glove
box, has been placed in the "ON"
position.
The passenger's front airbag is activated.
In this case, do not install a "rear facing"
child seat.
Move the control switch to the "OFF" position to
deactivate the passenger's front airbag.
In this case, you can install a "rear facing" child seat.
Stop & Start
fixed.
When the vehicle stops (red lights,
traffic jams, ...) the Stop & Start
system has put the engine into
STOP mode.
The warning lamp goes off and the engine restarts
automatically in START mode, as soon as you want to
move off.
flashes for a few
seconds, then goes
off.
STOP mode is temporarily
unavailable.
or
START mode is invoked
automatically.
For more information on special cases with STOP
mode and START mode, refer to the "Stop & Start"
section.
1
17
Monitoring
Deactivation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally.
This is may be accompanied by an audible signal and a message in the instrument panel screen.
Warning / indicator lamp
Passenger's
airbag system
18
State
Cause
Action / Observations
fixed in the instrument
panel and/or seat belt
and front passenger's
airbag warning lamps
display.
The control switch, located in the
glove box, is set to the OFF position.
The passenger's front airbag is
deactivated.
Set the control to the "ON" position to activate the
passenger's front airbag.
In this case, do not fit a child seat in the rear-facing
position.
Monitoring
Warning lamps
When the engine is running or the vehicle is being driven, illumination of one of the following warning lamps indicates a fault which requires action on
the part of the driver.
Any fault resulting in the illumination of a warning lamp must be investigated further by reading the associated message in the instrument panel screen.
If you encounter any problems, contact a PEUGEOT dealer or a qualified workshop.
Warning / indicator lamp
State
Cause
Action / Observations
STOP
fixed, associated
with another warning
lamp, accompanied
by an audible signal
and a message in the
screen.
Illumination of this warning lamp is
related to a serious fault with the
braking system, power steering, the
engine oil pressure or engine coolant
temperature or a major electrical
fault.
Stop as soon as it is safe to do so as the engine may
cut out.
Park, switch off the ignition and call a PEUGEOT
dealer or a qualified workshop.
Service
on temporarily.
Minor faults have occurred for which
there is no specific warning lamp.
Identify the fault by reading the message shown in the
screen, such as, for example:
- the engine oil level,
- saturation of the particle emissions filter (Diesel).
- the power steering,
- a minor electrical fault.
-...
For any other faults, contact a PEUGEOT dealer or a
qualified workshop.
fixed.
Major faults have occurred for which
there is no specific warning lamp.
Identify the fault by reading the message shown in
the screen and then contact a PEUGEOT dealer or
qualified workshop.
1
19
Monitoring
Warning / indicator lamp
+
20
State
Cause
Action / Observations
Electric parking
brake
flashing.
The electric parking brake is not
applied automatically.
The application/release is faulty.
You must stop as soon as it is safe to do so.
Park on flat level ground, engage a gear (or place the
lever in position P for an automatic gearbox), switch
off the ignition and contact a PEUGEOT dealer or a
qualified workshop.
Electric parking
brake fault
fixed.
The electric parking brake has a fault.
Contact a PEUGEOT dealer or a qualified workshop
without delay.
For more information on the electric parking brake,
refer to the corresponding section.
Deactivation of
the automatic
functions of the
electric parking
brake
fixed.
The "automatic application" (on
switching off the engine) and
"automatic release" functions are
deactivated or faulty.
Activate the function (according to country) via the
vehicle configuration menu or contact a PEUGEOT
dealer or a qualified workshop if automatic
application / release is not possible.
For more information on the electric parking brake,
refer to the corresponding section.
Braking
fixed.
The brake fluid level has dropped
significantly.
You must stop as soon as it is safe to do so.
Top up with brake fluid listed by PEUGEOT.
If the problem persists, have the system checked by a
PEUGEOT dealer or a qualified workshop.
fixed, associated
with the ABS warning
lamp.
The electronic brake force distribution
(EBFD) system has a fault.
You must stop as soon as it is safe to do so.
Have it checked by a PEUGEOT dealer or a qualified
workshop.
Monitoring
Warning / indicator lamp
State
Cause
Action / Observations
Anti-lock
Braking System
(ABS)
fixed.
The anti-lock braking system has a
fault.
The vehicle retains conventional braking.
Drive carefully at reduced speed and contact a
PEUGEOT dealer or a qualified workshop without
delay.
Dynamic
stability control
(DSC/ASR)
flashing.
The DSC/ASR regulation is
operating.
The system optimises traction and improves the
directional stability of the vehicle in the event of loss of
grip or trajectory.
fixed.
The DSC/ASR system has a fault.
Have it checked by a PEUGEOT dealer or a qualified
workshop.
flashing.
The engine management system has
a fault.
Risk of destruction of the catalytic converter.
Have it checked by a PEUGEOT dealer or a qualified
workshop.
fixed.
The emission control system has a
fault.
The warning lamp should go off when the engine is started.
If it does not go off, contact a PEUGEOT dealer or qualified
workshop without delay.
fixed with the needle
in the red zone.
When it first comes on there remains
approximately 7 litres of fuel in the
tank.
At this point, you begin to use the fuel
reserve.
Refuel as soon as possible to avoid running out of
fuel.
This warning lamp will come on every time the ignition
is switched on, until a sufficient addition of fuel is
made.
Never continue to drive until you run out of fuel, as
this could damage the emission control and injection
systems.
Engine
autodiagnosis
system
Low fuel level
1
21
Monitoring
Warning or indicator lamp
in the instrument panel
AdBlue ® additive
(BlueHDi Diesel)
+
22
State
Cause
Action / Observations
fixed, on switching
on the ignition,
accompanied by an
audible signal and a
message indicating the
remaining driving range.
The remaining driving range is
between 350 miles (600 km) and
1500 miles (2400 km).
Have the AdBlue ® additive tank topped up as soon
as possible: go to a dealer PEUGEOT or a qualified
workshop, or carry out this operation yourself by
referring to the corresponding section.
flashing associated with
the SERVICE warning
lamp, accompanied by
an audible signal and a
message indicating the
remaining driving range.
The remaining driving range is
between 0 and 375 miles (600 km).
You must top-up the AdBlue ® additive tank to avoid
a breakdown: go to a dealer PEUGEOT or a qualified
workshop, or carry out this operation yourself by
referring to the corresponding section.
flashing, associated
with the SERVICE
warning lamp,
accompanied by an
audible signal and a
message indicating that
starting is prevented.
The AdBlue ® tank is empty: the
starting inhibition system required
by legislation prevents starting of the
engine.
To be able to start the engine, you must top-up the
AdBlue ® additive tank: go to a dealer PEUGEOT or a
qualified workshop, or carry out this operation yourself
by referring to the corresponding section.
It is essential to add at least 3.8 litres of AdBlue ® to
the tank.
Monitoring
Warning or indicator lamp
in the instrument panel
+
+
SCR emissions
control system
(BlueHDi Diesel)
State
Cause
Action / Observations
fixed, on switching on
the ignition, associated
with the SERVICE
and engine diagnostic
warning lamps,
accompanied by an
audible signal and a
message indicating an
emissions control fault.
A fault with the SCR emissions
control system has been detected.
This alert disappears once the exhaust emissions
return to normal levels.
flashing, on switching
on the ignition,
associated with the
SERVICE and engine
diagnostic warning
lamps, accompanied by
an audible signal and a
message indicating the
remaining driving range.
The remaining driving range is
between 0 and 650 miles (1 100 km).
Contact a PEUGEOT dealer or a qualified workshop
without delay, to avoid a breakdown.
flashing, on switching
on the ignition,
associated with the
SERVICE and engine
diagnostic warning
lamps, accompanied by
an audible signal and a
message indicating that
starting is prevented.
You have exceeded the authorised
driving limit: the starting inhibition
system prevents starting of the
engine.
To be able to start the engine, you must call on a
PEUGEOT dealer or a qualified workshop.
1
23
Monitoring
Warning or indicator lamp
in the instrument panel
State
Cause
Action / Observations
Engine oil
pressure
fixed.
There is a fault with the engine
lubrication system.
You must stop as soon it is safe to do so.
Park, switch off the ignition and contact a PEUGEOT
dealer or a qualified workshop.
Battery charge
fixed.
The battery charging circuit has a
fault (dirty or loose terminals, slack or
cut alternator belt, ...).
The warning lamp should go off when the engine is
started.
If it does not go off, contact a PEUGEOT dealer or a
qualified workshop.
Door(s) open
fixed, associated with
a message identifying
the door, if the speed is
below 6 mph (10 km/h).
A door or the boot is still open.
Close the door or boot.
fixed, associated with a
message identifying the
door, and accompanied
by an audible signal
if the speed is above
6 mph (10 km/h).
24
Monitoring
Warning / indicator lamp
+
State
Cause
Action / Observations
Seat belt(s)
not fastened /
unfastened
fixed then flashing
accompanied by an
increasing audible
signal.
A seat belt has not been fastened or
has been unfastened.
Pull the strap then insert the tongue in the buckle.
Airbags
on temporarily.
This lamp comes on for a few
seconds when you turn on the
ignition, then goes off.
This lamp should go off when the engine is started.
If it does not go off, contact a PEUGEOT dealer or a
qualified workshop.
fixed.
One of the airbag or seat belt
pretensioner systems has a fault.
Have it checked by a PEUGEOT dealer or a qualified
workshop.
Directional
headlamps
flashing.
The directional headlamps system
has a fault.
Have it checked by a PEUGEOT dealer or a qualified
workshop.
Under-inflation
fixed.
The pressure in one or more wheels
is too low.
Check the pressure of the tyres as soon as possible.
This check should preferably be carried out when the
tyres are cold.
flashing then fixed,
accompanied by the
Service warning lamp.
The tyre pressure monitoring system
has a fault or no sensor is detected
on one of the wheels.
Under-inflation detection is not assured.
Have the system checked by a PEUGEOT dealer or a
qualified workshop.
1
25
Monitoring
Coolant temperature gauge
Engine oil temperature
gauge
After driving for a few minutes, the temperature
and pressure in the cooling system increase.
To top up the level:
F wait for the engine to cool,
F unscrew the cap by two turns to allow the
pressure to drop,
F when the pressure has dropped, remove
the cap,
F top up the level to the "MAX" mark.
With the engine running, when the needle is:
- in zone A, the temperature is correct,
- in zone B, the temperature is too high; the
central STOP warning lamp comes on,
accompanied by an audible signal and a
message in the instrument panel screen.
You MUST stop as soon as it is safe to do
so.
Wait a few minutes before switching off the
engine.
Contact a PEUGEOT dealer or a qualified
workshop.
26
Be aware of the risk of burns when
topping up the cooling system. Do not
fill above the maximum level (indicated
on the reservoir).
On switching on the ignition or when driving, it
indicates the engine oil temperature.
With the needle in zone C, the temperature is
correct.
With the needle in zone D, the temperature is
too high.
Slow down to lower the oil temperature.
Monitoring
CHECK (vehicle autotest)
Automatic CHECK
Lighting dimmer control
1
Manual CHECK
With the key in the ignition on position, all of the
warning lamps for the functions tested are displayed.
They are switched off after a few seconds.
At the same time, an automatic CHECK
(vehicle autotest) is carried out.
If no "major" fault is found, you can start your
vehicle.
In the presence of a fault
A "minor" fault has been detected: the warning
lamp(s) are displayed then go off.
You can start your vehicle; however, contact a
PEUGEOT dealer or a qualified workshop as
soon as possible.
A "major" fault has been detected: the
associated warning lamps(s) remain on
accompanied by the STOP or SERVICE
warning lamp.
Do not start your vehicle.
Call a PEUGEOT dealer or a qualified
workshop without delay.
Pressing the "CHECK" button on the
instrument panel starts the manual CHECK
(vehicle autotest).
This function enables you to recall at any time
(with the key in the ignition on position or with
the engine running), the alerts present.
With the engine running and the vehicle
moving, the instrument panel displays the
warning lamps (in the event of a fault).
With the headlamps on, press button B to
increase the brightness of the instruments
and controls and the interior mood lighting or
button A to reduce it.
As soon as the lighting reaches the required
level of brightness, release the button.
The passenger's airbag deactivated warning
lamp* remains on while the airbag is deactivated.
If your vehicle has a BlueHDi engine,
pressing the "CHECK" button gives
you the distance that can be travelled
before engine starting is prevented
automatically.
For more information on the AdBlue ®
additive, refer to the corresponding
section.
* According to country.
27
Monitoring
Service indicator
This is a check against the planned servicing
intervals in the manufacturer's servicing
schedule.
It is calculated from the last service indicator
reset according to the number of miles travelled
and the time elapsed since the last service.
For BlueHDi Diesel versions only (depending
on country of sale), the level of deterioration of
the engine oil is also taken into account.
More than 1 800 miles (3 000 km)
remain before the next service is due
Less than 600 miles (1 000 km)
remain before the next service is due
When the ignition is switched on, no service
information appears in the screen.
Example: 560 miles (900 km) remain before
the next service is due.
For 5 seconds after the ignition is switched on,
the screen indicates:
Between 600 miles (1 000 km) and
1 800 miles (3 000 km) remain before
the next service is due
For 5 seconds after the ignition is switched on, the
spanner symbolising the service operations comes
on. The distance recorder display line indicates the
distance remaining before the next service is due.
Example: 1 700 miles (2 800 km) remain before
the next service is due.
For 5 seconds after the ignition is switched on, the
screen indicates:
With BlueHDi Diesel versions the
Service warning lamp may come on as
soon as the ignition is switched on.
5 seconds after the ignition is switched on,
the distance recorder resumes its normal
operation. The spanner remains on to
indicate that a service must be carried out
soon.
5 seconds after the ignition is switched on,
the spanner goes off; the distance recorder
resumes its normal operation. The screen then
indicates the total and trip distances.
Illumination of the key is accompanied
by a message in the instrument panel
screen.
28
Monitoring
Service overdue
For 5 seconds after the ignition is switched on,
the spanner flashes to indicate that the service
must be carried out as soon as possible.
Example: the service is overdue by 186 miles
(300 km).
For 5 seconds after the ignition is switched on,
the screen indicates:
5 seconds after the ignition is switched on, the
distance recorder resumes its normal operation.
The spanner remains on.
The spanner may also come on if
you have exceeded the period since
the last service, as indicated in the
maintenance and warranty guide.
With BlueHDi Diesel versions, the
spanner can also come on in advance
of the service interval, according to the
level of deterioration of the engine oil,
which depends on the driving conditions
in which the vehicle is used.
Service indicator zero reset
If you have carried out the service on your
vehicle yourself:
F switch off the ignition,
F press and hold the trip distance recorder
zero reset button,
F switch on the ignition; the distance recorder
display begins a countdown,
F when the display indicates "=0", release
the button; the spanner disappears.
1
Following this operation, if you wish to
disconnect the battery, lock the vehicle
and wait at least five minutes for the
zero reset to be registered.
Retrieving the service
information
You can access the service information at any
time.
F Press the trip distance recorder zero reset
button.
The service information is displayed for a
few seconds, then disappears.
After each service, the service indicator must
be reset to zero.
29
Monitoring
Engine oil level indicator*
Mileage recorder
On versions fitted with an electric oil level indicator, the state of the engine oil level is displayed in
the instrument panel for a few seconds, after the servicing information.
The level read will only be correct if
the vehicle is on level ground and the
engine has been off for more than
30 minutes.
Oil level indicator fault
This is signalled by the display of the message "Oil
level measurement invalid" in the instrument panel.
Contact a PEUGEOT dealer or a qualified
workshop.
Oil level correct
Oil level incorrect
This is indicated by the display of the message
"Oil level incorrect" in the instrument panel
screen, accompanied by the service warning
lamp and an audible signal.
If the low oil level is confirmed by a check using
the dipstick, the level must be topped up to
avoid damage to the engine.
In the event of a fault with the electric indicator,
the oil level is no longer monitored.
If the system is faulty, you must check the
engine oil level using the manual dipstick
located under the bonnet.
Trip recorder zero reset
Refer to the "Checking levels" section.
Refer to the "Checking levels" section.
30
The total mileage is displayed in zone A of the
screen and the trip mileage in zone B.
With the trip mileage displayed, press the
button for a few seconds.
* Depending on version.
Monitoring
Trip computer
System which provides current information
concerning the trip (range, fuel consumption…).
1
Information display
-The current information tab with:
● the range,
● the current fuel consumption,
● the Stop & Start time counter.
Instrument panel screen
F Press the steering mounted control to
display the various trip computer tabs in
succession.
-The trip "1" tab with:
● the average speed,
for the first trip,
● the average fuel consumption,
● the distance travelled.
-The trip "2" tab with:
● the average speed,
for the second trip,
● the average fuel consumption,
● the distance travelled.
F Or on the end of the wiper stalk.
31
Monitoring
Trip reset
F When the trip required is displayed, press
the control for more than two seconds or
make a long press on the left hand thumb
wheel of the steering mounted controls.
Trips "1" and "2" are independent but their use
is identical.
For example, trip "1" can be used for daily
figures, and trip "2" for monthly figures.
32
Monitoring
1
Information display
The information is accessible in the "Driving" menu.
Trip reset
The current instantaneous fuel
consumption tab with:
- the range,
- the current fuel consumption,
- the Stop & Start time counter.
Permanent display:
F Select the "Driving" menu.
The trip computer information is displayed in
the primary page of the menu.
F Press one of the buttons to display the
desired tab.
Temporary display in a new window:
F Press the end of the wiper control stalk for
access to the information and display the
different tabs.
The trip "1" tab with:
- the distance travelled.
- the average fuel consumption,
- the average speed,
for the first trip.
The trip "2" tab with:
- the distance travelled.
- the average fuel consumption,
- the average speed,
for the second trip.
F When the desired trip is displayed, press
the reset button or on the end of the wiper
control stalk.
Trips "1" and "2" are independent but their use
is identical.
For example, trip "1" can be used for daily
figures, and trip "2" for monthly figures.
33
Monitoring
Trip computer, a few definitions…
Range
Current fuel consumption
(miles or km)
This indicates the distance
which can still be travelled with
the fuel remaining in the tank
in relation to the average fuel
consumption over the last few
miles (kilometres) travelled.
(mpg or l/100 km or km/l)
This is the average fuel consumption
during the last few seconds.
This value may vary following a change
in the style of driving or the relief,
resulting in a significant change in the
current fuel consumption.
When the range falls below 20 miles (30 km),
dashes are displayed. After filling with at least
5 litres of fuel, the range is recalculated and is
displayed when it exceeds 60 miles (100 km).
If dashes are displayed continuously
while driving in place of the digits,
contact a PEUGEOT dealer or a
qualified workshop.
34
This function is only displayed from
20 mph (30 km/h).
Average fuel
consumption
(mpg or l/100 km or km/l)
This is the average fuel
consumption since the last trip
computer zero reset.
Average speed
(mph or km/h)
This is the average speed calculated
since the last trip computer zero
reset (ignition on).
Stop & Start time
counter
(minutes / seconds or hours /
minutes)
If your vehicle is fitted with
Stop & Start, a time counter
calculates the time spent in
STOP mode during a journey.
It resets to zero every time the
ignition is switched on with
the key.
Monitoring
Touch screen
It gives access to:
- menus for adjusting settings for vehicle
functions and systems,
- audio and display configuration menus,
- audio system and telephone controls and
the display of associated information.
And, depending on equipment, it allows:
- the display of alert messages and the
visual parking sensors information,
- access to the controls for the navigation
system and Internet services, and the
display of associated information.
General operation
Recommendations
State of indicator lamps
It is necessary to press firmly, particularly for
"flick" gestures (scrolling through lists, moving
the map...).
A light wipe is not enough.
The screen does not recognise pressing with
more than one finger.
This technology allows use at all temperatures
and when wearing gloves.
Do not use pointed objects on the touch
screen.
Do not touch the touch screen with wet hands.
Uses a soft clean cloth to clean the touch
screen.
Some buttons contain an indicator lamp that
gives the state of the corresponding function.
Green indicator: you have switched on the
corresponding function.
Orange indicator: you have switched off the
corresponding function.
1
For reasons of safety, the driver
should only carry out operations
that require close attention, with the
vehicle stationary.
Some functions are not accessible
when driving.
35
Monitoring
Principles
Press the virtual buttons in the touch screen.
Each menu is displayed over one or two pages
(primary page and secondary page).
Use this button to go to the
secondary page.
Use this button to return to the
primary page.
After a few moments with no action on
the secondary page, the primary page
is displayed automatically.
Use this button for access to
additional information and to the
settings for certain functions.
Use this button to confirm.
Use this button to quit.
Navigation.
Depending on trim level, navigation
can be not available, an option or
standard.
See the "Audio equipment and
telematics" section.
Radio Media.
See the "Audio equipment and
telematics" section.
Telephone.
See the "Audio equipment and
telematics" section.
Driving
Gives access to the trip computer
and, depending on version, allows
settings to be adjusted for certain
functions.
See the corresponding section.
Settings.
Allows configuration of the display
and the system.
Menus
Press this button for access to the
main menu or press one of the
buttons on the control panel for direct
access to a particular menu.
36
Internet.
These services are available as standard or as an
option.
See the "Audio equipment and telematics" section.
1. Volume / mute.
See the "Audio equipment and telematics" section.
Monitoring
"Settings" menu
1
The functions available through this menu are detailed in the table below.
Button
Corresponding function
Comments
Audio settings
Adjustment of volume, balance...
Color schemes
Choice of color scheme.
Turn off screen
Turn off the display in the the touch screen (black screen). Pressing the black screen restores
the display.
System Settings
Choice of units:
- temperature (°Celsius or °Fahrenheit)
- distance and fuel consumption (l/100 km, mpg or km/l).
Time/Date
Setting the date and time.
Languages
Choice of language used: French, English, Italian, Spanish, German, Dutch, Portuguese,
Polish, Turkish, Russian.
Screen settings
Adjustment of the display settings (scrolling of text, animations...)
Calculator
Display the calculator.
Calendar
Display the calendar.
37
Monitoring
"Driving" menu
The systems with settings that can be adjusted (depending on version) are detailed in the table below.
Button
38
Corresponding function
Comments
Parking sensors
Deactivation of the function.
Blind spot sensors
Activation of the function.
Monitoring
Setting the date and time
1
Audio system without touch screen
Using the arrows, select "Personalisationconfiguration" and confirm.
Select the setting to be modified. Confirm
by pressing OK, then make the change and
confirm again to save the modification.
Adjust the settings one by one, confirming by
pressing the OK button. Next select the "OK"
tab on the screen then confirm to exit from the
"Date and time adjustment" menu.
Press MENU.
Using the arrows, select "Display
configuration" and confirm.
Using the arrows, select "Date and time
adjustment" and confirm.
39
Monitoring
Audio system with touch screen
F Select the "Settings" menu.
F In the secondary page, press on
"Time/Date".
40
F Select "Adjust time" or "Adjust date"
and modify the settings using the numeric
keypad, then confirm.
F Press "Confirm" to quit.
Access
Remote control key
System which permits central unlocking or locking of the vehicle using the lock barrel or from a
distance. It is also used to locate and start the vehicle, as well as providing protection against theft.
Unfolding the key
Folding the key
F First press this button to unfold the key.
F First press this button to fold the key.
If you do not press the button when folding
the key, there is a risk of damage to the
mechanism.
2
41
Access
"Keyless Entry and Starting" system
Unlocking the vehicle
Complete unlocking
System that allows the opening, closing
and starting of the vehicle while keeping the
electronic key on your person. It can also be
used as a remote control.
Using the electronic key
Using the key
FTurn the key to the front of the vehicle to
unlock the vehicle.
Using the remote control
F Press the open padlock to unlock
the vehicle.
For reasons of safety and theft
protection, do not leave your electronic
key in the vehicle, even when you are
close to it.
It is recommended that you keep it on
your person: in a pocket, bag, ...
42
Holding this button down
opens the windows
automatically.
To avoid inadvertently locking the
vehicle with the windows open, contact
a PEUGEOT dealer to deactivate this
function.
F With the electronic key on your person
and in the recognition zone, pass your
hand behind the door handle to unlock the
vehicle, then pull on the handle to open the
door.
Your passengers can also open their doors
with the exception of the boot, as soon as
the electronic key is in the recognition zone
around the vehicle.
Unlocking is confirmed by rapid
flashing of the direction indicators for
approximately two seconds.
According to version, the door mirrors
unfold at the same time.
Access
Accumulations (water, dust, grime,
salt...) on the inner surface if the door
handle may affect detection.
If cleaning the inner surface of the door
handle using a cloth does not restore
detection, contact a PEUGEOT dealer
or a qualified workshop.
A sudden splash of water (stream of
water, high pressure jet washer, …)
may be identified by the system as the
desire to open the vehicle.
Selective unlocking
This is set via the instrument panel
screen configuration menu.
Complete unlocking is activated by
default.
Using the remote control
FTo unlock the driver's door only
press the open padlock once.
FTo unlock the other doors and the boot,
press the open padlock again.
Using the electronic key
2
FTo unlock only the driver's door with the
electronic key on your person, pass your
hand behind the driver's door handle then
pull the handle to open the door.
FTo unlock the vehicle completely, pass your
hand behind one of the passenger door
handles, on the side of the vehicle where
the electronic key is located, then pull the
door handle.
Each unlocking is confirmed by rapid
flashing of the direction indicators for
approximately two seconds.
According to version, the door mirrors
unfold at the same time as the first
unlocking action.
43
Access
Unlocking the boot
Using the remote control
F Press this button to unlock the
vehicle and open the boot.
Boot only function activated
This is set in the instrument panel
configuration menu.
This function is deactivated by default.
F use of the remote control or the electronic
key then unlocks and/or opens only the
boot.
Don't forget to lock your boot
afterwards.
Using the electronic key
F With the electronic key in the recognition
zone, press button 1 (Saloon) or lift
lever 2 (SW) to unlock the vehicle and open
the boot.
44
Access
2
Locking the vehicle
Normal locking
Maintaining the locking action
(remote control or manual
key) automatically closes the
windows and sunroof.
Contact a PEUGEOT for
deactivation of this function.
Using the key
FTurn the key towards the rear of the vehicle
to lock the vehicle completely.
Using the remote control
F Press the closed padlock to lock
the vehicle completely.
Using the electronic key
F With the electronic key in the recognition
zone, press with a finger on the door
handle (at the markings) to lock the vehicle.
F From the boot (SW only), with the
electronic key in the recognition zone,
press a button to lock the vehicle.
Locking is confirmed by fixed
lighting of the direction indicators for
approximately two seconds.
According to version, the door mirrors
fold at the same time.
45
Access
If one of the doors or the boot is still
open or if the key for Keyless Entry and
Starting system has been left inside
the vehicle or if the ignition is on, the
central locking does not take place.
When the vehicle is locked, if it is
unlocked inadvertently, it will lock itself
again automatically after about thirty
seconds unless a door is opened.
If the alarm was previously activated,
it will not be reactivated automatically.
The folding and unfolding of the door
mirrors by the remote control can be
deactivated by a PEUGEOT dealer or a
qualified workshop.
46
As a safety measure (children on
board), never leave the vehicle without
taking the key for the Keyless Entry and
Starting system, even for a short period.
Guard against theft when the key for the
Keyless Entry and Starting system is
in the recognition zone with the vehicle
unlocked.
In order to preserve the charge of the
cell battery in the remote control, the
"hands-free" functions go into extended
stand-by after 21 days of non-use. To
restore these functions, press one of
the remote control buttons or start the
engine with the electronic key in the
reader.
Access
Deadlocking
Using the remote control
Deadlocking renders the exterior and
interior door controls inoperative.
It also deactivates the manual central
control button.
Therefore, never leave anyone inside
the vehicle when it is deadlocked.
F Press the closed padlock to lock
the vehicle completely or press
the closed padlock for more
than two seconds to close the
windows automatically in addition
to locking.
By the tailgate (SW only):
F With the electronic key in the recognition
zone, press the button to lock the vehicle.
F Within five seconds, press the button to
deadlock the vehicle.
2
F Press the closed padlock again within
five seconds to deadlock the vehicle.
Deadlocking is confirmed by fixed
lighting of the direction indicators for
approximately two seconds.
Using the key
FTurn the key to the rear in the driver's door
lock to lock the vehicle completely.
FTurn the key to the rear again within five
seconds to deadlock the vehicle.
Using the electronic key
By the doors:
F With the electronic key in the recognition
zone, press a finger on the door handle (at
the markings) to lock the vehicle.
F Within five seconds, press the door handle
again to deadlock the vehicle.
47
Access
Locking/ unlocking from the inside
Locating your vehicle
Automatic central locking of the
doors
The doors can lock automatically while driving
(speed above 6 mph (10 km/h)).
To activate or deactivate this function, press
and hold the button until a message appears in
the screen.
F Press the button.
This allows the doors and the boot to be locked
or unlocked.
If the vehicle is deadlocked or locked
with the remote control or the door
handles, the button is not active. In this
case, use the key or the remote control
to unlock.
When carrying large objects with the
boot open, you can press this button to
inhibit the boot open alert signal. When
locking from inside, the door mirrors do
not fold.
48
Driving with the doors locked may make
access to the passenger compartment
by the emergency services more
difficult in an emergency.
F Press the closed padlock to
locate your locked vehicle in a
car park.
This is indicated by lighting of the courtesy
lamps and flashing of the direction indicators
for a few seconds.
Access
Emergency procedure
Emergency unlocking/
locking using the electronic
key
The integral key is used to lock and unlock the
vehicle when the electronic key cannot operate:
- cell battery flat, vehicle battery discharged
or disconnected, ...
- vehicle located in an area with strong
electromagnetic emissions.
F Pull on button 1, to extract the integral
key 2.
FUnlock or lock the vehicle using the key.
Manual locking
Remote control problem
Driver's door
Following disconnection of the vehicle battery,
replacement of the remote control battery or
in the event of a remote control malfunction,
you can no longer unlock, lock or locate your
vehicle.
F First of all, use the key in the lock to unlock
or lock your vehicle.
FThen, reinitialise the remote control.
If the problem persists, contact a PEUGEOT
dealer or a qualified workshop as soon as
possible.
Insert the key in the lock to lock or unlock the
door.
2
Reinitialisation with the remote
control
Passenger doors
F On the rear doors, check that the child lock
is not on.
F Remove the black cap located on the edge
of the door, using the key.
F Insert the key into the aperture without
forcing, then without turning, move the
latch sideways towards the inside of the
door.
F Remove the key and refit the cap.
F Switch on the ignition.
F Immediately press one of the remote
control buttons for a few seconds.
F Switch off the ignition.
The remote control is fully operational again.
49
Access
Reinitialisation with the
electronic key
Changing the battery of the key
Changing the battery of the
electronic key
Battery ref.: CR2032 / 3 volts.
This replacement battery is available from a
PEUGEOT dealer or a qualified workshop.
A message appears in the instrument panel
screen when replacement of the battery is
needed.
FUnclip the cover using a small screwdriver
at the cutout.
F Lift off the cover.
F Remove the flat battery from its location.
F Fit the new battery into its location
observing the original direction of fitment.
F Clip the cover onto the casing.
Battery ref.: CR2032 / 3 volts.
This replacement battery is available from a
PEUGEOT dealer or a qualified workshop.
A message is displayed in the instrument panel
screen when replacement of the battery is
needed.
FUnclip the cover using a pointed object at
the key ring.
F Slide the flat battery out of its location.
F Slide the new battery into its location
observing the original direction of fitment.
F Clip the cover in place starting at the front.
F Reinitialise the electronic key.
F Switch of the ignition.
F Immediately press one of the remote
control buttons for a few seconds.
F Switch on the ignition
The electronic key is fully operational again.
Do not throw the remote control
batteries away, they contain metals
which are harmful to the environment.
Take them to an approved collection
point.
50
Access
Lost keys, remote control, electronic key
Visit a PEUGEOT dealer with the vehicle's V5 registration document and your personal identification documents.
The PEUGEOT dealer will be able to retrieve the key code and the transponder code required to order a replacement.
Remote control
2
The high frequency remote control is a sensitive system; do not operate it while it is in your pocket as there is a possibility that it may unlock
the vehicle, without you being aware of it.
Do not repeatedly press the buttons of your remote control out of range and out of sight of your vehicle. You run the risk of stopping it from
working and the remote control would have to be reinitialised.
The remote control does not operate when the key is in the ignition, even when the ignition is switched off.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment by the emergency services more difficult in an emergency.
As a safety precaution (with children on board), remove the key from the ignition or take the electronic key when you leave the vehicle, even for
a short time.
Electrical interference
The Keyless Entry and Starting electronic key may not operate if close to certain electronic devices: telephone, laptop computer, strong
magnetic fields, ...
Anti-theft protection
Do not make any modifications to the electronic engine immobiliser system; this could cause malfunctions.
Don't forget to turn the steering to engage the steering lock.
When purchasing a second-hand vehicle
Have the key codes memorised by a PEUGEOT dealer, to ensure that the keys in your possession are the only ones which can start the vehicle.
51
Access
Alarm
-Tilt
The system checks for any change in the
attitude of the vehicle.
The alarm is triggered if the vehicle is lifted,
moved or knocked.
Self-protection function
System which protects and provides a deterrent
against theft and break-ins. It provides the
following types of monitoring:
-Exterior perimeter
The system checks for opening of the vehicle.
The alarm is triggered if anyone tries to open a
door, the boot or the bonnet...
-Interior volumetric
The system checks for any variation in the
volume in the passenger compartment.
The alarm is triggered if anyone breaks a
window, enters the passenger compartment or
moves inside the vehicle.
52
The system checks for the putting out of
service of its components.
The alarm is triggered if the battery, the
central control unit or the wires of the
siren are put out of service or damaged.
For all work on the alarm system,
contact a PEUGEOT dealer or a
qualified workshop.
Locking the vehicle with full
alarm system
Activation
The monitoring system is active: the indicator
lamp on the button flashes once per second.
After the locking button on the remote control
is pressed or the vehicle locked using the
Keyless Entry and Starting system, the exterior
perimeter monitoring is activated after a delay
of 5 seconds, the interior volumetric monitoring
after 45 seconds and anti-tilt monitoring after
90 seconds.
If an opening (door, boot...) is not closed
fully, the vehicle is not locked but the exterior
perimeter monitoring will be activated after a
delay of 45 seconds.
Deactivation of the volumetric
monitoring
F Press the unlocking button on
the remote control or unlock the
vehicle using the Keyless Entry
and Starting system.
F Switch off the ignition and get out of the vehicle.
F Press the locking button on the
remote control or lock the vehicle
using the Keyless Entry and
Starting system.
The volumetric protection system is
deactivated: the indicator lamp in the
button goes off.
Access
Locking the vehicle
with exterior perimeter
monitoring only
Deactivate the interior volumetric and anti-lift
monitoring to avoid unwanted triggering of the
alarm in certain cases such as:
- leaving a window partially open,
- washing your vehicle,
- changing a wheel,
- having your vehicle towed,
- transportation by sea.
Deactivation of the interior
volumetric and anti-tilt monitoring
F Switch of the ignition and within
ten seconds, press this button
until the indicator lamp is on
continuously.
FGet out of the vehicle.
F Press the locking button on
the remote control immediately
or lock the vehicle using the
Keyless Entry and Starting
system.
The exterior perimeter monitoring alone is
activated: the indicator lamp in the button
flashes once per second.
To be effective, this deactivation must be carried
out each time the ignition is switched off.
Reactivation of the interior
volumetric and anti-tilt monitoring
F Press the unlocking button on
the remote control or unlock the
vehicle using the Keyless Entry
and Starting system to deactivate
the exterior perimeter monitoring.
F Press the locking button on the
remote control or lock the vehicle
using the Keyless Entry and
Starting system to activate all the
monitoring functions.
The indicator lamp in the button
again flashes once per second.
Triggering of the alarm
This is indicated by sounding of the siren
and flashing of the direction indicators for
thirty seconds.
The monitoring functions remain active until
the alarm has been triggered eleven times in
succession.
When the vehicle is unlocked using
the remote control or unlocked
using the Keyless Entry and Starting
system, rapid flashing of the indicator
lamp in the button informs you that the alarm
was triggered during your absence. When
the ignition is switched on, this flashing stops
immediately.
Failure of the remote control
To deactivate the monitoring functions:
FUnlock the vehicle using the key in the
driver's door lock.
F Open the door; the alarm is triggered.
F Switch on the ignition; the alarm stops. The
indicator lamp in the button switches off.
2
Locking the vehicle without
activating the alarm
F Lock or deadlock the vehicle using the key
in the driver's door lock.
Operating fault
When the ignition is switched on, fixed
illumination of the indicator lamp in the button
indicates a fault in the system.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
Automatic activation*
2 minutes after the last door or the boot is
closed, the system is activated automatically.
FTo avoid triggering the alarm on entering
the vehicle, first press the unlocking button
on the remote control or unlock the vehicle
using the Keyless Entry and Starting
system.
* According to country.
53
Access
Electric windows
Safety anti-pinch
Manual operation
To open or close the window, press or pull the
switch gently. The window stops as soon as the
switch is released.
1. Left hand front electric window switch.
2. Right hand front electric window
switch.
3. Right hand rear electric window switch.
4. Left hand rear electric window switch.
5. Deactivating the rear electric window
switches,
locking the rear doors
(child lock).
54
Automatic operation
(depending on version)
To open or close the window, press or pull
switch fully: the window opens or closes
completely when the switch is released.
Pressing the switch again stops the movement
of the window.
The electric window switches remain
operational for approximately one minute after
the key has been removed from the ignition.
Once this time has elapsed, the electric
windows will not operate. To reactivate them,
switch the ignition on again.
When the window rises and meets an obstacle,
it stops and immediately partially lowers again.
In the event of unwanted opening of the
window on closing, press the switch until the
window opens completely, then pull the switch
immediately until the window closes. Continue
to hold the switch for approximately one second
after the window has closed.
The safety anti-pinch function is not active
during this operation.
Deactivating the rear window
controls
For the safety of your children, press switch 5
to prevent operation of the rear windows
irrespective of their position.
The interior controls for the rear doors are also
deactivated.
When the button is pressed down, the warning
lamp is on, the switches are deactivated. When
the button is raised, the switches are active, the
warning lamp is off.
Access
2
Reinitialisation of the
electric windows
Following reconnection of the battery, the
safety anti-pinch function must be reinitialised.
The safety anti-pinch function is not active
during these operations:
- lower the window completely, then raise
it, it will rise in steps of a few centimetres
each time the switch is pressed. Repeat
the operation until the window closes
completely,
- continue to press the switch for at least
one second after reaching this position,
window closed.
Always remove the key from the ignition
when leaving the vehicle, even for a
short time.
In the event of contact during operation
of the windows, you must reverse the
movement of the window. To do this,
press the switch concerned.
When operating the passenger electric
window switches, the driver must
ensure that no one is preventing correct
closing of the windows.
The driver must ensure that the
passengers use the electric windows
correctly.
Be aware of children when operating
the windows.
55
Access
Boot
Opening
From the inside
Hold this button down until unlocking of the
boot is heard.
Saloon
SW
F After unlocking the vehicle completely
using the remote control or the key, press
this button.
F After unlocking the vehicle completely
using the remote control or the key, press
at the top (on lever A), and raise the
tailgate.
Closing
F Lower the tailgate using the interior grab
handle.
If the tailgate is not closed correctly:
-
-
56
when the engine is running,
this warning lamp and a message
in the instrument panel screen
appear for a few seconds,
when the vehicle is moving (speed above
6 mph (10 km/h)), this warning lamp and
a message, accompanied by an audible
signal, appear in the instrument panel
screen for a few seconds.
Access
Motorised tailgate (SW)
2
Opening
From the inside
Vehicle locked/deadlocked
F Press this button A on the
remote control.
Vehicle unlocked
F Press button A on the remote control, or
press the push button B on the tailgate.
F Press this button to unlock and open the
tailgate.
Check that here is no obstacle in the
way when opening the tailgate by
remote control.
57
Access
Closing
F Press this button C to close the
tailgate electrically.
Do not hinder closing of the tailgate: any
obstacle to closing causes the tailgate to stop
and rise a few centimetres automatically.
To close the tailgate manually: move the
tailgate slightly up then down to disengage it
from its drive then lower it until closed.
To avoid the risk of injury, ensure
that no one is close to the rear of the
vehicle when opening or closing the
tailgate.
58
Stopping the opening or
closing
While electric opening or closing of the tailgate
is in progress, you can stop its movement at
any time:
F press the interior button or button A on
the remote control or button B or C on the
tailgate.
Adjusting the opening
height
The maximum opening height of the tailgate
can be set and memorised (restricted overhead
clearance, ...).
This memorisation is done in two steps, by
successive presses on button C:
- during opening, a first press stops the
tailgate at the desired height,
- a second maintained press memorises the
position of the tailgate; an audible signal
confirms the memorisation.
To delete this memorisation, make a new
maintained press until the audible signal is
heard.
"Boot open" warning
With the engine running or when the vehicle is
moving, if the tailgate is not properly closed,
a message accompanied by an audible signal
(from 6 mph (10 km/h)) is displayed in the
instrument panel screen.
Access
Emergency release (Saloon
and SW)
System for mechanical unlocking of the boot in
the event of a battery or central locking fault.
2
Unlocking
F Fold back the rear seats to gain access to
the lock from inside the boot.
F Insert a small screwdriver into hole A of
the lock, then move the lever to the left to
unlock the boot.
59
Access
Sunroof
Your vehicle is fitted with an opening sunroof which increases the light and visibility in the passenger compartment.
Opening
Closing
Blind
Turn the dial to the left to slide the sunroof
(several possible opening settings).
Return the dial to the initial position.
If the position of the glass panel does not agree
with the position indicated by the dial, press
the ring of the dial to open the sunroof to this
position.
The blind improves thermal and acoustic
comfort.
The blind is opened automatically when the
sunroof is opened. It must be closed manually
after closing the sunroof.
Raising the rear of of the sunroof
Turn the dial to the right to raise the rear of the
sunroof.
60
Access
Safety anti-pinch
Reinitialising the system
Am anti-pinch system stops the closing of the
roof, whether sliding or from the raised at the
rear position. If the sunroof encounters an
obstacle it partially opens again.
If the sunroof fails to close at a second attempt,
it may be necessary to force the closing of the
sunroof using the reinitialisation procedure.
Following reconnection of the battery, or in the
event of a malfunction in its operation, it may
be necessary to reinitialise the system:
F turn the dial to the right to raise the sunroof
at the rear,
F wait until the sunroof is fully up at the rear,
F then immediately press the dial for at least
3 seconds.
2
The driver should ensure that
passengers use the sunroof correctly.
Be aware of children when operating
the sunroof.
If the sunroof opens on its own when closing,
as soon as possible after the sunroof stops:
- put the dial in the fully closed position,
- press the dial,
- maintain pressure on the dial until the
sunroof closes.
The anti-pinch function is inoperative
during these operations.
61
Access
Panoramic sunroof (SW)
Opening
Turn the dial to the left (several possible
opening settings).
Closing
Return the dial to the initial position.
If the position of the blind does not agree with
the position indicated by the dial, press the dial
to open the blind to this position.
Your vehicle is fitted with a tinted glass
panoramic sunroof which increases the light
and visibility in the passenger compartment. Its
electric blind helps control the temperature and
noise level in the passenger compartment.
Electric blind
Safety anti-pinch
If the blind encounters an obstacle during
closing, it stops and partially opens again to the
2nd position.
If the blind fails to close at a second attempt,
it may be necessary to force the closing of the
blind using the reinitialisation procedure.
Reinitialising the system
Following reconnection of the battery, or in the
event of a malfunction in its operation, it may
be necessary to reinitialise the system:
F turn the dial to the fully open position,
F wait until the blind is fully open,
F then immediately press the dial for at least
3 seconds,
The blind is controlled electrically by a rotary
opening dial.
62
If the blind opens on its own when closing, as
soon as possible after the blind stops:
- put the dial in the fully closed position,
- press the dial,
- maintain pressure on the dial until the blind
closes.
The anti-pinch function is inoperative
during these operations.
In the event of contact during operation
of the blind, you must reverse its
movement. To do this, turn the dial.
When the driver operates the dial, they
must ensure that nothing prevents the
blind from closing correctly.
The driver must ensure that the
passengers use the blind correctly.
Be aware of children during operation
of the blind.
Access
Fuel tank
Capacity of the tank: approximately 72 litres (or 55 litres according to version).
Opening
Refuelling
F Introduce the nozzle and push it in fully
(pushing on the the metal non-return valve A).
F Fill the tank. Do not continue past the third
cut-off of the nozzle, as this may cause
malfunctions.
F Refit the filler cap turning it a 1/4 turn to the
right.
F Push the filler flap to close it.
- Press the switch.
This control remains active for a few
minutes after switching off the ignition. If
necessary, switch the ignition on again to
reactivate it.
With Stop & Start, never refuel with the
system in STOP mode; you must switch
off the ignition with the key.
Additions of fuel must be of at least 5 litres to
be registered by the fuel gauge.
Opening the filler cap may result in an inrush of
air. This vacuum is entirely normal and results
from the sealing of the fuel system.
FTake care to select the pump that delivers
the correct fuel type for your vehicle's
engine (reminder on a label on the inside of
the filler flap).
F Open the filler cap by turning it a 1/4 turn to
the left.
F Remove the filler cap and hang it on its
carrier (on the filler flap).
2
Your vehicle is fitted with a catalytic converter,
a device which helps to reduce the level of
harmful emissions in the exhaust gases.
For petrol engines, you must use unleaded
fuel only.
The filler neck is narrower, admitting petrol
nozzles only.
If you have put in the wrong fuel for
your vehicle, you must have have
the tank drained and refilled with
the correct fuel before you start the
engine.
63
Access
Diesel misfuel prevention
Low fuel level
hen the low fuel level in the
W
tank is reached, this warning lamp
comes on in the instrument panel,
accompanied by an audible warning
and a message in the instrument
panel screen.
When it first comes on, around 7 litres of fuel
remain in the tank.
You must refuel as soon as possible to avoid
running out.
Mechanical device which prevents filling the tank of a Diesel vehicle with petrol. It avoids the risk of
engine damage that can result from filling with the wrong fuel.
Located in the filler neck, the misfuel prevention device appears when the filler cap is removed.
Operation
It is still possible to use a fuel can to fill
the tank but this must be done slowly.
In order to ensure a good flow of fuel,
do not place the nozzle of the fuel can
in direct contact with the flap of the
misfuel prevention device.
Travelling abroad
Fuel supply cut-off
Your vehicle is equipped with a safety device
which cuts off the fuel supply in the event of a
collision.
64
When a petrol filler nozzle is introduced into the
fuel filler neck of your Diesel vehicle, it comes
into contact with the flap. The system remains
closed and prevents filling.
Do not persist but introduce a Diesel filler
nozzle.
As Diesel fuel pump nozzles may be different
in other countries, the presence of the misfuel
prevention device may make refuelling
impossible.
Before travelling abroad, we recommend that
you check with the PEUGEOT dealer network,
whether your vehicle is suitable for the fuel
pumps in the country in which you want to
travel.
Access
Fuel used for petrol engines
Fuel used for Diesel
engines
The petrol engines are compatible with E10
type petrol biofuels (containing 10 % ethanol),
conforming to European standards EN 228 and
EN 15376.
E85 type fuels (containing up to 85 % ethanol)
are reserved exclusively for vehicles marketed
for the use of this type of fuel (BioFlex
vehicles). The quality of the ethanol must
comply with European standard EN 15293.
The Diesel engines are compatible with
biofuels which conform to current and future
European standards (Diesel fuel which
complies with standard EN 590 mixed with
a biofuel which complies with standard
EN 14214) available at the pumps (containing
up to 7 % Fatty Acid Methyl Ester).
The B30 biofuel can be used in certain Diesel
engines; however, this use is subject to strict
application of the special servicing conditions
indicated in the warranty and maintenance
record. Contact a PEUGEOT dealer or a
qualified workshop.
The use of any other type of (bio)fuel
(vegetable or animal oils, pure or diluted,
domestic fuel...) is strictly prohibited (risk of
damage to the engine and fuel system).
2
DIESEL
65
Comfort
Front seats
Manual adjustments
1. Adjustments to the height and angle
of the head restraint
To raise it, pull upwards.
To lower it, hold the button in and
press on the head restraint (pushing
to go past the stiff point of the button).
2. Adjustment of the backrest angle
Operate the control lever and adjust
the position of the backrest to the front
or to the rear.
3. Adjustment of the seat height
Raise or lower the control lever the
number of times required to obtain
the desired position.
4. Adjustment of the lumbar support
This system allows the height and
depth of the lumbar support to be
adjusted separately.
FForwards or backwards to increase
or decrease the lumbar support.
FUpwards or downwards to raise or
lower the lumbar contact zone.
5. Forwards-backwards adjustment of
the seat position
Lift the control bar and slide the seat
forwards or backwards.
6. Adjusting the cushion
Pull the handle to adjust the length of the
cushion.
66
Before moving the seat backwards, ensure that there is nothing that might prevent the full
travel of the seat, so as to avoid the risk of of jamming the seat caused by the presence of
objects on the floor behind the seat or rear passengers. If the seat jams, stop the movement
immediately.
Comfort
Electric adjustments
1. Adjustment of the seat cushion angle
and height, and forwards-backwards
adjustment
FRaise or lower the front of the control to
adjust the seat cushion angle.
FRaise or lower the rear of the control to
raise or lower the seat.
FSimultaneously raise or lower the front
and rear of the control in order to raise or
lower the entire seat.
2. Adjustment of the backrest angle
Move the control forwards or backwards to
adjust the backrest angle.
3. Adjustment of lumbar support
This function allows you to independently
adjust the height and level of lumbar
support.
Switch on the ignition or start the engine if the vehicle has gone into economy mode.
The electric functions of the driver's seat are active for about a minute after opening the
front door. They are deactivated about a minute after switching off the ignition and in
economy mode.
To reactivate them, switch on the ignition.
3
Move the control:
F Forwards or backwards to increase or
reduce the lumbar support.
FUpwards or downwards to raise or lower
the lumbar support zone.
Before moving the seat backwards, ensure that there is nothing that might prevent the full
travel of the seat, so as to avoid the risk of of jamming the seat caused by the presence of
objects on the floor behind the seat or rear passengers. If the seat jams, stop the movement
immediately.
67
Comfort
Storing driving positions
Welcome function
Storing a position
using buttons M / 1 / 2
System which stores the electrical settings of
the driver's seat and door mirrors as well as
the head-up display settings. It enables you to
store up to two positions using the buttons on
the side of the driver's seat.
F Switch on the ignition.
F Adjust your seat, the door mirrors and the
head-up display.
F Press button M, then press button 1 or 2
within four seconds.
An audible signal indicates that the position
has been stored.
Storing a new position cancels the previous
position.
Recalling a stored position
Ignition on or engine running
F Briefly press button 1 or 2 to recall the
corresponding position.
An audible signal indicates the end of the
adjustment.
You can interrupt the current movement by
pressing button M, 1 or 2 or by using one of the
seat controls.
A stored position cannot be recalled while
driving.
Recalling stored positions is deactivated
45 seconds after switching off the ignition.
68
The welcome function assists entry and leaving
the vehicle.
After switching off the ignition and opening
the driver’s door, the seat moves back
automatically and then stays in this position,
ready for the next entry to the vehicle.
When switching on the ignition, the seat moves
forward to the stored driving position.
When moving the seat, take care that no
person or object hinders the automatic
movement of the seat.
This function can be activated
or deactivated via the vehicle
configuration menu.
Comfort
Heated seats control
3
With the engine running, the front seats can be
heated separately.
Head restraint height and angle
adjustment
FTo lower the head restraint, press the lug A
and, going beyond the stiff point, guide the
head restraint downwards, then release the
button at the desired position.
FTo raise the head restraint, guide it
upwards to the desired position.
FTo remove the head restraint, press the two
lugs B and pull the head restraint upwards.
FTo put the head restraint back in place,
engage the head restraint stems in the
openings keeping them in line with the seat
back. Check that it has engaged by pulling
it upwards.
The head restraint is fitted with a
locking mechanism which prevents it
from lowering; this is a safety device in
case of impact.
The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
Never drive with the head restraints
removed; they must be in place and
adjusted correctly.
FUse the adjustment wheel to switch on and
select the level of heating required:
0: Off.
1: Low.
2: Medium.
3: High.
69
Comfort
Massage function
Activation
F Press this button.
This function provides the driver with a back
massage. It only operates when the engine is
running as well as in STOP mode of the Stop &
Start system.
The warning lamp comes on and the massage
function is activated for a period of 1 hour.
During this time, massage is performed in
cycles of 6 minutes (4 minutes of massage
followed by 2 minutes break). In total, the
system will perform 10 cycles.
After one hour, the function is deactivated, the
warning lamp goes off.
Deactivation
You can deactivate the massage
function at any time by pressing this
button.
70
Comfort
Rear seats
Bench seat the left-hand (1/3) or right-hand (2/3) section of which can be folded to adapt the boot load space.
Outer rear seat head restraints
These have a high position (comfort and
safety), a low position (rear visibility) and can
also be removed.
Folding the seat
from the boot
(SW)
3
Each section of the bench seat (1/3 or 2/3) has
its own control to release the seat back and its
seat cushion from the boot.
To remove a head restraint:
F pull the head restraint fully upwards,
F then, press the lug A.
Never drive with rear passengers when
the head restraints are removed; the
head restraints must be in place and in
the high position.
F Check that nothing is preventing the seat
back from folding (head restraint, seat
belts, ...),
F check also that no object on or under the
seat could hinder its movement,
F pull the control from the boot and push the
seat backrest.
71
Comfort
Folding the seat from
the rear
Returning the seat back to its original position
When returning the rear seat back to its original
position, take care not to trap the seat belts
and ensure that their buckles are positioned
correctly.
Check that no object, either on or underneath
the seat, could hinder its movement.
F Move the corresponding front seat
forwards if necessary,
F check that the seat belt is positioned
correctly on the side of the seat back,
F place the head restraints in the low position
or remove them if necessary,
72
F pull the control 1 forwards to release the
seat backrest 2 then fold it forwards.
F Put the seat back in the upright position
and secure it, the seat cushion also returns
to its original position,
F check that the red indicator, located at the
control 1, is no longer visible,
F refit the head restraints or put them back in
place.
Comfort
Mirrors
Door mirrors
Folding
-
-
Automatic: lock the vehicle using the
remote control or the key.
Manual: with the ignition on, pull control A
rearwards.
3
If the mirrors are folded using control A,
they will not unfold when the vehicle is
unlocked. Pull again on control A.
Adjustment
Each fitted with an adjustable mirror glass
providing the lateral rearward vision necessary
for overtaking or parking. They can also be
folded for parking in confined spaces.
Demisting - Defrosting
Demisting-defrosting of the door mirrors
operates with the engine running, by switching
on the heated rear screen.
Refer to the "Rear screen demist-defrost"
section.
F Move control A to the right or to the left to
select the corresponding mirror.
F Move control B in all four directions to
adjust.
F Return control A to the central position.
As a safety measure, the mirrors should
be adjusted to reduce the "blind spots".
The objects observed are, in reality,
closer than they appear.
Take this into account in order to
correctly judge the distance of vehicles
approaching from behind.
Unfolding
-
-
Automatic: unlock the vehicle using the
remote control or the key.
Manual: with the ignition on, pull control A
rearwards.
The folding and unfolding of the door
mirrors using the remote control can be
deactivated by a PEUGEOT dealer or a
qualified workshop.
Fold the mirrors when putting your
vehicle through an automatic car wash.
If necessary, it is possible to fold the
mirrors manually.
73
Comfort
Automatic tilting in reverse gear
Switching on
System which provides a view of the ground
during parking manoeuvres in reverse gear.
F With the engine running, engage reverse
gear.
F Move control A to the right or to the left to
select the corresponding mirror.
The glass of the mirror selected tilts
downwards, in accordance with its
programming.
Switching off
Programming
F With the engine running, engage reverse
gear.
F Select and adjust the left-hand and righthand mirrors in succession.
The adjustment is stored immediately.
74
FExit reverse gear and wait ten seconds.
or
F Return control A to the central position.
The mirror glass returns to its initial position.
The mirror glass also returns to its initial
position:
- if the speed exceeds 6 mph (10 km/h),
- if the engine is switched off.
Comfort
Steering wheel adjustment
Rear view mirror
Adjustable mirror providing a central rearward
view.
Equipped with an anti-dazzle system, which
darkens the mirror glass and reduces the
nuisance to the driver caused by the sun,
headlamps from other vehicles...
3
Automatic day/night model
Manual day/night model
By means of a sensor, which measures the
light from the rear of the vehicle, this system
automatically and progressively changes
between the day and night uses.
Adjustment
F When stationary, lower the control lever
to release the steering wheel adjustment
mechanism.
F Adjust the height and reach to suit your
driving position.
F Pull the control lever to lock the steering
wheel adjustment mechanism.
F Adjust the mirror so that the glass is
directed correctly in the "day" position.
Day / night position
F Pull the lever to change to the "night" antidazzle position.
F Push the lever to change to the normal
"day" position.
In order to ensure optimum visibility
during your manoeuvres, the mirror
lightens automatically when reverse
gear is engaged.
As a safety precaution, these
operations should only be carried out
while the vehicle is stationary.
75
Comfort
Interior fittings
1. Cooled glove box
It has a ventilation nozzle (delivering cool air)
which can be closed* using a thumb wheel,
as well as a USB port* for the 3G key.
2. Storage
3. Retractable cup holder
Press the cover to open the cup holder
4. Removable ashtray
Press the lid to open the ashtray.
To empty it, pull it out by pulling it upwards.
5. Controls*
Massage, Adaptive lighting, Blind spot
monitoring, Alarm, PEUGEOT Connect
SOS, PEUGEOT Connect Assistance.
6. Storage with sliding cover
7. Front armrest
8. 12 V accessory socket (120 W)*
Observe the maximum power rating to
avoid damaging your accessory
9. PEUGEOT Connect USB
* Depending on version.
76
Comfort
Mats
Rear armrest
Removable carpet protection.
Fitting
Refitting
3
To refit the mat on the driver's side:
F position the mat correctly,
F refit the fixings by pressing,
F check that the mat is secured correctly.
When fitting the mat for the first time, on the
driver's side use only the fixings provided in the
wallet attached.
The other mats are simply placed on the
carpet.
To avoid any risk of jamming of the
pedals:
- only use mats which are suited to
the fixings already present in the
vehicle; these fixings must be used,
- never fit one mat on top of another.
The use of mats not approved by
PEUGEOT may interfere with access to
the pedals and hinder the operation of
the cruise control / speed limiter.
The mats approved by PEUGEOT have
two fixings located below the seat.
F Lower the rear armrest for a more
comfortable position.
It may be fitted with cup holders and also gives
access to the ski flap.
Removal
To remove the mat on the driver's side:
F move the seat as far back as possible,
F unclip the fixings,
F remove the mat.
77
Comfort
Ski flap
PEUGEOT Connect USB
Facility for storing and transporting long
objects.
Opening
F
F
F
F
Lower the armrest.
Press the flap opening control.
Lower the flap.
Load the objects from inside the boot.
Do not leave the flap open when not
transporting long objects.
78
This connection box comprises a JACK
auxiliary socket and a USB port.
It permits the connection of portable device,
such as a digital audio player of the iPod ® type
or a USB memory stick.
It reads the audio file formats (MP3, OGG,
WMA, WAV, ...) which are transmitted to your
audio equipment and played via the vehicle's
speakers.
You can manage these files using the steering
mounted controls or the audio system control
panel and display them in the instrument panel
screen.
When the USB port is used, the portable device
charges automatically.
While charging, a message is displayed if the
current consumption of the portable device
exceeds the current delivered by the vehicle.
For more information on the use of this
system, refer to the "Audio equipment
and telematics" section.
Comfort
Boot fittings (Saloon)
1. Retractable hooks
2. Storage pockets
With towing eye, a wheel chock and a
temporary puncture repair kit (according to
destination country and equipment).
3. Stowing rings
4. Retaining straps
5. Boot lamp
6. Boot floor
For access to the storage compartments or
the spare wheel (according to destination
country), raise the floor
7. Adjustable divider
3
79
Comfort
Boot fittings (SW)
1.
2.
3.
4.
5.
Boot lamps
Rear seats folding controls
Retractable hooks
12 V accessory socket (120 W max)
Storage pockets
With towing eye, a wheel chock and a
temporary puncture repair kit (according to
destination country and equipment).
6. Stowing rings
7. Load space cover
(see following page)
8. Boot floor
For access to the storage compartments or the
spare wheel (according to destination country),
position the floor vertically in its guide.
80
Comfort
Luggage cover
(SW)
To reel in
To remove
To install
FGently push on the (PRESS) handle, the
luggage cover reels in automatically.
The moving part A can be folded against the
rear bench seat backrest.
F Compress the control 1 and lift the
luggage cover on the right then on the left
to remove it.
F Position the left-hand end of the luggage
cover roller in its location B behind the rear
bench seat.
F Compress the roller control 1 and put the
roller in place in its location C on the right.
F Release the control to secure the luggage
cover.
FUnreel it to its fastening on the rear pillar.
3
81
Comfort
High load retaining net
(SW)
Hooked onto the special upper and lower
fixings, this allows the use of the entire loading
volume up to the roof:
- behind the front seats (row 1) when the rear
seats are folded.
- behind the rear seats (row 2).
Never reposition the rear seats if the
net's roller is attached to the backs of
the folded seats.
Row 1
F position the net's roller above the two rails
(located on the back of the folded rear
seats),
F the two grooves A must be placed above
the two rails B. Slide the two rails B in the
grooves A and push the roller (lengthwise)
from right to left to secure it,
F check that the net is hooked and tightened
correctly,
82
F fold the rear seats,
F unroll the high load retaining net without
stretching it,
F position one of the ends of the net's metal
bar in the corresponding upper fixing 1,
F pull the net's metal bar to position the other
end in the other upper fixing 1.
Comfort
3
Row 2
F reel in then remove the load space cover,
F position the left hand end of roller 2 in the
load space cover support,
F position the right hand end of roller 2 in the
load space cover support, then lock the
position (red indicator),
F from the rear bench seat, unroll the high
load retaining net by pushing to disengage
the retaining hooks,
F position one of the ends of the net's metal
bar in the corresponding upper fixing 3,
F pull on the net's metal bar to position the
other end in the other upper fixing 3,
F check that the net is hooked and tensioned
correctly.
83
Comfort
Heating and Ventilation
System which creates and maintains good
conditions of comfort and visibility in the
vehicle's passenger compartment.
Air intake
The air circulating in the passenger compartment
is filtered and originates either from the outside via
the grille located at the base of the windscreen or
from the inside in air recirculation mode.
Controls
The incoming air follows various routes
depending on the controls selected by
the driver, the front passenger and rear
passengers, according to the level of
equipment.
The temperature control enables you to obtain
the level of comfort required by mixing the air of
the various circuits.
The air distribution control enables you to
select the air vents used in the passenger
compartment by the combined use of the
associated buttons.
The air flow control enables you to increase or
reduce the speed of the ventilation fan.
These controls are grouped together on control
panel A on the centre console.
84
Air distribution
1. Windscreen demisting/defrosting vents.
2. Front side window demisting/defrosting
vents.
3. Side adjustable air vents.
4. Central adjustable air vents.
5. Air outlets to the front footwells.
6. Adjustable air vents for the rear
passengers.
7. Air outlets to the rear footwells.
Comfort
Recommended interior settings
Heating or Manual air conditioning
I require...
Air distribution
Air flow
Air recirculation/Intake of
exterior air
Temperature
Manual AC
3
HOT
COLD
DEMISTING
DEFROSTING
Digital air conditioning: use fully automatic operation in preference, by pressing the "AUTO" button.
85
Comfort
Recommendations for ventilation and air conditioning
In order for these systems to be fully effective, follow the operation and maintenance
guidelines below:
F If the interior temperature remains very high after the vehicle has been parked in the sun for a
considerable time, first ventilate the passenger compartment for a few minutes.
Place the air flow control at a sufficient level to provide an adequate renewal of air in
the passenger compartment.
FTo obtain an even air distribution, take care not to obstruct the exterior air intake grilles
located at the base of the windscreen, the nozzles, the vents and the air outlets, as well
as the air extractor located in the boot.
FUse in preference the intake of exterior air as prolonged use of the air recirculation may
cause misting of the windows and side windows.
F Do not cover the sunshine sensor, located on the dashboard; this is used for regulation
of the automatic air conditioning system.
F Operate the air conditioning system for 5 to 10 minutes, once or twice a month to keep it
in good working order.
FEnsure that the passenger compartment filter is in good condition and have the filter
elements replaced regularly (refer to the "Checks" section).
We recommend the use of a combined passenger compartment filter. Thanks to its
second special active filter, it contributes to the purification of the air breathed by the
occupants and the cleanliness of the passenger compartment (reduction of allergic
symptoms, bad odours and greasy deposits).
FThe air conditioning uses power from the engine while operating. This results in an
increase in the vehicle's fuel consumption.
When towing at or near maximum capacity or on steep slopes in high ambient
temperatures, switching off the air conditioning saves engine power and so improves
towing capacity.
Condensation created by the air conditioning results in a discharge of water under the
vehicle when stationary, which is perfectly normal.
FTo ensure correct operation of the air conditioning system, you are also advised to have
it checked regularly.
F If the system does not produce cold air, do not use it and contact a PEUGEOT dealer or
a qualified workshop.
86
The air conditioning system does not
contain chlorine and does not present
any danger to the ozone layer.
Comfort
Manual air conditioning
The air conditioning can only operate with the engine running.
3. Air distribution adjustment
F Press the corresponding button for:
Windscreen and side windows.
3
Central and side vents.
1. Temperature adjustment
FTurn the dial from left
(cold) to right (hot) to adjust
the temperature to your
requirements.
2. Air flow adjustment
F Press the "full fan" button to
increase the air flow.
According to the value selected,
the associated line of LEDs fills
progressively.
Footwells.
Depending on your requirements, you
can combine two distribution buttons
or select the three distribution modes
simultaneously.
F Press the "empty fan" button to
reduce the air flow.
87
Comfort
4. Air intake / Air recirculation
The intake of exterior air prevents the formation
of mist on the windscreen and side windows.
The recirculation of interior air isolates the
passenger compartment from exterior odours
and smoke.
Return to exterior air intake as soon as possible
to prevent deterioration of the the air quality
and the formation of mist.
5. Air conditioning On / Off
The air conditioning is designed to
operate effectively in all seasons,
with the windows closed.
It enables you to:
- lower the temperature, in summer,
- increase the effectiveness of the demisting
in winter, above 3°C.
Switching on
F Press this button to recirculate
the interior air. The indicator
lamp comes on to confirm this.
F Press the button again to
permit the intake of exterior air.
The indicator lamp goes off to
confirm this.
F Press the "A/C" button, its indicator lamp
comes on.
The air conditioning does not operate when the
air flow adjustment is set to off.
To obtain cool air sooner, you can use
recirculation of the interior air for a few
moments. Then return to the intake of
exterior air.
Switching off
F Press the "A/C" button again, its indicator
lamp goes off.
Switching off may result in some discomfort
(humidity, misting).
88
6. Automatic visibility
programme
See "Front demisting - Defrosting".
Comfort
Dual-zone digital air conditioning
The air conditioning can only operate with the engine running.
Automatic operation
2 - 3. D
river-passenger side
adjustment
The driver and front passenger can each adjust
the temperature to their requirements.
The value indicated on the display corresponds
to a level of comfort and not to a temperature in
degrees Celsius or Fahrenheit.
FTurn control 2 or 3 to the left
(blue) or to the right (red)
respectively to decrease or
increase this value.
1. Automatic comfort programme
F Press this "AUTO" button. The
indicator lamp comes on.
We recommend that you use this mode. It
automatically adjusts all settings to provide
optimum operation for the comfort level
chosen: passenger compartment temperature,
air flow, air distribution and air recirculation.
This system is designed to operate effectively
in all seasons, with the windows closed.
3
When the engine is cold, to prevent
too great a distribution of cold air, the
air flow will reach its optimum level
gradually.
In cold weather, it favours the
distribution of warm air to the
windscreen, side windows and footwells
only.
A setting around the value 21 provides
optimum comfort. However, depending on your
requirements, a setting between 18 and 24 is
normal.
It is recommended that the difference between
left and right should not be greater 3.
89
Comfort
5. Mono-zone / Dual-zone
On entering the vehicle, if the interior
temperature is much colder or warmer
than the comfort value, there is no
need to change the value displayed in
order to obtain the comfort required.
The system corrects the difference
in temperature automatically and as
quickly as possible.
4. A
utomatic visibility
programme
See "Front demisting-defrosting".
With Stop & Start, when demisting has
been activated, the STOP mode is not
available.
90
F Press this button to equalise the
comfort value on the passenger's
side with that on the driver's side
(mono-zone). The indicator lamp
in the button comes on.
6. Air conditioning On / Off
The air conditioning is designed to
operate effectively in all seasons,
with the windows closed.
It allows you:
- in summer, to lower the temperature,
- in winter, above 3°C, to improve demisting
performance.
Switching on
F Press the "A/C" button, the associated
green indicator lamp comes on.
The air conditioning does not operate when
the air flow control is set to off.
Switching off
F Press the "A/C" button again, the
associated green indicator lamp goes off.
Switching off the air conditioning may result in
some discomfort (humidity, misting).
7. Maximum air conditioning
If you want to temporarily refresh the
air in the passenger compartment,
press this button and  "LO" is
displayed.
To return to the previous settings, press the
button again.
Manual operation
If you wish, you can change one of settings
provided by the system. The other functions will
still be controlled automatically.
F Pressing the "AUTO" button returns the
system to completely automatic operation.
For maximum cooling or heating of the
passenger compartment, it is possible
to exceed the minimum value 14 or the
maximum value 28.
FTurn control 2 or 3 to the left until
"LO" is displayed or to the right
until "HI" is displayed.
Comfort
8. Air distribution adjustment
F Press the corresponding button for:
9. Air flow adjustment
F Press this "full fan" button to
increase the air flow.
Windscreen and side windows.
The air flow symbol, the fan, fills progressively
according to the value requested.
Centre and side vents.
FPress "empty fan" button to
reduce the air flow.
Footwells.
10. Air intake / Air recirculation
F Press this button for recirculation
of the interior air. The indicator
lamp on the button comes on.
3
Air recirculation enables the passenger
compartment to be isolated from exterior
odours and smoke. It is activated automatically
when operating the screenwash.
F As soon as possible, press this button
again to permit the intake of outside air and
prevent the formation of condensation. The
indicator lamp in the button goes off.
Switching the system off
To suit your requirements, you can
combine two distribution buttons or
select the three distribution modes
simultaneously.
F Press this "empty fan" air
flow button until the fan symbol
disappears and "--" appears.
This action switches off all of the functions of
the air conditioning system.
Temperature related comfort is no longer
guaranteed but a slight flow of air, due to the
forward movement of the vehicle, can still be felt.
Avoid driving for long periods with the
system off (risk of condensation and
deterioration of the air quality).
Pressing the "full fan" button
reactivates the system with the values
in use at the time it was switched off.
91
Comfort
Quad-zone digital air conditioning
The air conditioning can only operate with the engine running.
Automatic operation
3 - 4. Driver-passenger side
adjustment
The driver and front passenger can each adjust
the temperature to their requirements.
The value indicated on the display corresponds
to a level of comfort and not to a temperature in
degrees Celsius or Fahrenheit.
1. Automatic comfort programme
The Soft/Auto/Fast modes allow the driver
and front seat passenger to select their
desired comfort settings for the passenger
compartment:
Favours optimum gentle and silent
operation by limiting the air flow.
Offers the best compromise between
thermal comfort and silence of
operation.
Favours dynamic and effective air
flow.
92
2. A
ctivating/deactivating the
rear air conditioning
Press this button to deactivate the
rear air conditioning and lock the
system. A padlock appears in the
LCD screen. When the rear system
is reactivated, automatic mode is selected with
the last temperature settings used.
FTurn control 3 or 4 to the left
(blue) or to the right (red)
respectively to decrease or
increase this value.
A setting around the value 21 provides
optimum comfort. However, depending on your
requirements, a setting between 18 and 24 is
normal.
It is recommended that the difference between
left and right should not be greater 3.
Comfort
On entering the vehicle, if the interior
temperature is much colder or warmer
than the comfort value, there is no
need to change the value displayed in
order to obtain the comfort required.
The system corrects the difference
in temperature automatically and as
quickly as possible.
6. Mono-zone / Quad-zone
Press this button to apply the driver's
comfort setting value to the front and
rear passengers (mono-zone). The
indicator lamp on the button comes on.
7. Air conditioning On / Off
5. Automatic visibility
programme
See "Front demisting-defrosting".
With Stop & Start, when demisting has
been activated, the STOP mode is not
available.
The air conditioning is designed to
operate effectively in all seasons,
with the windows closed.
It allows you:
- in summer, to lower the temperature,
- in winter, above 3°C, to improve demisting
performance.
Switching on
F Press the "A/C" button, the associated
green indicator lamp comes on.
The air conditioning does not operate when
the air flow control is set to off.
Manual operation
If you wish, you can change one of settings
provided by the system. The other functions will
still be controlled automatically.
Press one of the Soft/Auto/Fast buttons to
return to fully automatic operation.
3
For maximum cooling or heating of the
passenger compartment, it is possible
to exceed the minimum value 14 or the
maximum value 28.
FTurn the dial 3 or 4 to the left until
"LO" is displayed or to the right
until "HI" is displayed.
Switching off
F Press the "A/C" button again, the
associated green indicator lamp goes off.
Switching off the air conditioning may result in
some discomfort (humidity, misting).
93
Comfort
8. Air distribution adjustment
F Press the corresponding button for:
9. Air flow adjustment
F Press this "full fan" button to
increase the air flow.
Windscreen and side windows.
The symbol for air flow, the fan, fills
progressively according to the value requested.
Centre and side vents.
Footwells.
To suit your requirements, you can
combine two distribution buttons or
select the three distribution modes
simultaneously.
94
FPress "empty fan" button to
reduce the air flow.
Switching the system off
F Press this "empty fan" air
flow button until the fan symbol
disappears and "- -" appears.
This action switches off all of the functions of
the air conditioning system.
Temperature related comfort is no longer assured
but a slight flow of air, due to the forward movement
of the vehicle, can still be felt.
Avoid driving for long periods with the system
off (risk of condensation and deterioration of
the air quality). Pressing the "full fan" button
reactivates the system with the values in use at
the time it was switched off.
10. Air intake / Air recirculation
Automatic air intake mode
It is activated by default with
automatic comfort regulation.
Air recirculation enables the passenger
compartment to be isolated from exterior
odours and smoke. It is activated automatically
when operating the screenwash. It is inactive
when the ambient temperature is below 5°C to
guard against the risk of misting in the vehicle.
F As soon as possible, press this button
again to permit the intake of outside air and
prevent the formation of condensation. The
indicator lamp in the button goes off.
Comfort
Adjusting the rear passenger comfort level
The rear air conditioning controls only operate
if, from the front:
-the REAR button is activated,
- the automatic visibility programme is not
activated.
1. Automatic comfort programme
F Press the "AUTO" button. The
lamp in the button comes on.
2.Air distribution adjustment
3.Temperature adjustment, left
and right
Press the corresponding button successively for:
The left and rear passengers can each adjust
their temperature setting independently.
The value indicated in the screen is a level
of comfort and not a temperature in degrees
Celsius or Fahrenheit.
-
Footwell and centre vent.
-
Centre vent.
-
Automatic control of air
distribution.
3
FTurn the dial to the left to lower the
value and to the right to raise it.
A setting around 21 provides an optimum
level of comfort. However, depending on your
requirements, a setting between 18 and 24 is
normal.
It is recommended that the difference between
left and right should not be greater 3.
Ensure that the air grilles and vents on the floor
are not obstructed.
We recommend that you use this mode. It
automatically adjusts all settings to provide
optimum operation for the comfort level
chosen: passenger compartment temperature,
air flow and air distribution.
This system is designed to operate effectively
in all seasons, with the windows closed.
95
Comfort
4.Air flow adjustment
F Press this "full fan" button to
increase the air flow.
The air flow symbol, the fan, fills progressively
as the fan speed increases.
F Press this "empty fan" button to
reduce the air flow.
96
Deactivating the system
F Press the "empty fan" air flow
button until the fan disappears
and "- -" appears.
This action stops all of the functions of the air
conditioning system.
Thermal comfort is no longer controlled.
However, a slight air flow may still be felt,
resulting from the forward movement of the
vehicle.
Comfort
Front demist defrost
With manual air
conditioning
F Select this programme to demist
or defrost the windscreen and
side windows as quickly as
possible.
The system automatically manages the air
conditioning, air flow and air intake, and
provides optimum distribution towards the
windscreen and side windows.
Adjust the temperature control to quickly
demist /defrost the windows.
To switch it off, press the "visibility" button
again, the warning lamp in the button goes off
and the system reverts to the previous settings.
Rear screen demist defrost
With dual-zone and quadzone digital air conditioning
Automatic visibility programme
F Select this programme to demist
or defrost the windscreen and
side windows as quickly as
possible.
The system automatically manages the air
conditioning, air flow and air intake, and
provides optimum distribution towards the
windscreen and side windows.
With the quad-zone digital air conditioning,
pressing this button deactivates and locks the
rear air conditioning.
FTo stop the programme, press either the
"visibility" button again or "AUTO", the
warning lamp on the button goes off and
the warning lamp in the "AUTO" button
comes on.
The system reverts to the previous settings.
With Stop & Start, when demisting has
been activated, the STOP mode is not
available.
The rear screen demist - defrost can only
operate when the engine is running.
3
The control button is located on the
air conditioning system control panel.
Switching on
F Press this button to demist/defrost the rear
screen and, depending on version, the door
mirrors. The indicator lamp associated with
the button comes on.
Switching off
The demist/defrost switches off automatically to
prevent an excessive consumption of current.
F It is possible to stop the demist/defrost
operation before it is switched off
automatically by pressing the button again.
The indicator lamp associated with the
button goes off.
F Switch off the demist/defrost of the
rear screen and door mirrors as
soon as it is no longer needed as
lower current consumption results
in reduced fuel consumption.
97
Comfort
Programmable Heating / Ventilation
Programming
F In the "Main menu", select "Pre-heating /
Pre-ventilation".
Programmable heating
mode
This is an additional and separate system
which heats the engine hot water circuit
to improve defrosting and to preheat the
passenger compartment.
This indicator lamp comes on only
when if the system is programmed in
programmable heating mode.
With the ignition on, press the left hand
steering mounted thumb wheel for access to
the main menu.
F Select "Activation" and if necessary for
programming, "Parameters".
Programmable Ventilation
mode
This mode allows ventilation of the passenger
compartment with exterior air to improve the
temperature experienced on entering the
vehicle in summer.
98
F Select "Heating" to preheat the engine or
passenger compartment or "Ventilation" to
ventilate the passenger compartment.
Comfort
FSelect:
- immediate to start the heating or
ventilation (once confirmed "OK"),
- the first clock to programme/store your
departure time,
- the second clock to programme/store a
second departure time.
Depending on the departure time chosen, the
system calculates automatically the optimum
time to start operating.
The immediate or programmed
activation of Ventilation mode depends
on the temperatures inside and outside
the vehicle.
Using these two clocks and according
to season you can, for example, select
one or the other departure time.
A message in the instrument panel
screen confirms your choice.
3
Only one programmed or immediate
preheating/preventilation can be
activated between two starts of the
vehicle.
The heating and the ventilation in
immediate or programmable mode is
not activated when:
- the fuel level is too low,
- the battery is not sufficiently
charged.
To programme the heating and the
ventilation, it is necessary to first
deactivate the alarm volumetric and tilt
monitoring (see the "Alarm" section).
Always switch off the programmable
heating while refuelling to avoid any risk
of fire or explosion.
To avoid the risk of intoxication and
asphyxiation, the programmable
heating must not be used, even for
short periods, in an enclosed area such
as a garage or workshop not equipped
with exhaust gas extraction.
Do not park the vehicle on an
inflammable surface (dry grass, dead
leaves, paper…), there is a risk of fire.
99
Driving
Starting-switching off the engine
With a manual gearbox, put the gear lever in neutral.
With an electronic gearbox, put the gear lever in N.
With an automatic gearbox, put the gear lever in P or N.
To ensure the correct operation and
durability of the engine and gearbox,
when the ambient temperature is
below -23°C, it is necessary to leave the
engine running at idle for four minutes.
Starting using the key
Switching off using the key
F Immobilise the vehicle.
FTurn the key fully towards you to position 1
(Stop).
F Remove the key from the ignition switch.
Key left in the ignition
If the key is left in the ignition switch,
there is an audible signal on opening
the driver's door.
F Insert the key in the ignition switch.
FTurn the key fully towards the dashboard to
position 3 (Starting).
F When the engine starts, release the key.
100
Switching off the engine leads to a loss
of braking assistance.
Driving
Starting using the
electronic key
Switching off using the
electronic key
If one of the starting conditions is not
met, a reminder message appears in
the instrument panel screen. In some
circumstances, it is necessary to
turn the steering wheel slightly while
pressing the "START/STOP" button
to assist unlocking of the steering;
a message warns you when this is
needed.
F With the electronic key inside the vehicle,
press the brake pedal on vehicles with
automatic or electronic gearbox, or depress
the clutch pedal fully on vehicles with a
manual gearbox, then maintain pressure
until the engine starts.
F Press the "START/STOP"
button.
F Immobilise the vehicle.
F With the electronic key inside
the vehicle, press the "START/
STOP" button.
The engine stops and the steering column is
locked.
4
If the vehicle is not immobilised, the
engine will not stop.
Accessory position
With the electronic key inside the
vehicle, press the "START/STOP"
button, with no action on the pedals,
to switch the ignition on or off and so
activate accessories.
For Diesel vehicles, in very cold
weather the engine will not start until
the pre-heater warning lamp has
gone off.
101
Driving
Anti-theft protection
Electronic engine immobiliser
The keys contain an electronic chip which has
a secret code. When the ignition is switched
on, this code must be recognised in order for
starting to be possible.
This electronic engine immobiliser locks the
engine management system a few minutes
after the ignition is switched off and prevents
starting of the engine by anyone who does not
have the key.
Emergency switch-off using the
electronic key
In the event of a malfunction, you are informed
by a message in the instrument panel screen.
In this case, your vehicle does not start; contact
a PEUGEOT dealer as soon as possible.
Emergency starting with the
electronic key
When the electronic key is in the recognition
zone and your vehicle does not start after
pressing the "START/STOP" button:
F Open the housing below the "START/
STOP" button.
F Insert the electronic key in the location A.
F Press the "START/STOP" button.
Once the engine has started, you can
remove the electronic key and close the
housing.
102
In the event of an emergency only, the engine
can be switched of without conditions. To do
this, press and hold the "START/STOP" button
for about 3 seconds.
In this case the steering column locks as soon
as the vehicle stops.
if the electronic key is no longer in the
recognition zone when you request switching
off the engine, a message appears in the
instrument panel.
F Press and hold the "START/STOP" button
for about 3 seconds if you want to force
switching off the engine (note that restarting
will not be possible without the key).
The electronic key must always remain
inside the vehicle while in use.
Driving
Electric parking brake
Manual application
Programming the mode
Depending on the country of sale of the vehicle,
the automatic application when the engine is
switched off and the automatic release when
you press the accelerator can be deactivated.
Activation / deactivation is done via
the menu in the instrument panel
screen.
The electric parking brake
combines 2 operating modes:
- Automatic Application/Release
Application is automatic when the engine
stops, release is automatic on use of the
accelerator (this mode is activated by
default),
- Manual Application/Release
Manual application of the parking brake is
by pulling control lever A.
Manual release is by pushing and releasing
the control lever, while pressing the brake
pedal.
When the driver's door is opened, there is an
audible signal and a message is displayed if
the brake is not applied.
The parking brake is then applied and released
manually.
If this warning lamp comes on in the
instrument panel, the automatic mode
is deactivated.
It is recommended that you do not
apply the parking brake in very cold
conditions (ice) and during towing
(breakdown, caravan...). Deactivate the
automatic functions and release the
parking brake manually.
With the vehicle stationary, to apply the parking
brake whether the engine is running or off, pull
control lever A.
The application of the parking brake is
confirmed by:
- lighting of the braking warning
lamp and of the P warning lamp
in the control lever A,
-
4
display of the message "Parking
brake on".
When the driver’s door is opened with the
engine running, there is an audible signal and
a message is displayed if the parking brake
has not been applied, unless the gear lever is
in position P (Park) in the case of an automatic
gearbox.
Before leaving the vehicle, check that
parking brake warning lamps in the
instrument panel and the control lever A
are on, not flashing.
103
Driving
Manual release
Automatic application,
engine off
Maximum application
With the ignition on or the engine running, to
release the parking brake, press the brake
pedal, pull then release control lever A.
The full release of the parking brake is
confirmed by:
-
-
the braking warning lamp and
the P warning lamp in the control
lever A going off,
display of the message "Parking
brake off".
If you pull the control lever A without pressing
the brake pedal, the parking brake will not
be released and a message appears in the
instrument panel.
104
If necessary, you can make a maximum
application of the parking brake. It is obtained
by means of a long pull on control lever A,
until you see the message "Parking brake
applied fully" and an audible signal is heard.
Maximum application is essential:
- in the case of a vehicle towing a caravan
or a trailer, if the automatic functions are
activated but you are applying the parking
brake manually,
- when the slope you are parked on may
vary (e.g. on a ferry, on a lorry, during
towing).
In the case of towing, a loaded vehicle
or parking on a gradient, make a
maximum application of the parking
brake then turn the front wheels
towards the pavement and engage a
gear when you park.
After a maximum application, the
release time will be longer.
With the vehicle stationary, the parking brake
is automatically applied when the engine is
switched off.
The application of the parking brake is
confirmed by:
-
illumination of the braking warning
lamp and of the P warning lamp in
the control lever A,
-
display of the message "Parking
brake on".
Before leaving the vehicle, check that
parking brake warning lamps in the
instrument panel and in the control
lever A are on fixed (not flashing).
Never leave a child alone inside the
vehicle with the ignition on, as they
could release the parking brake.
Driving
Automatic release
The electric parking brake releases
automatically and progressively when you
press the accelerator:
F Manual gearbox: press down fully on the
clutch pedal, engage first gear or reverse,
press on the accelerator pedal and
move off.
F Electronic gearbox: select position A, M
or R then press on the accelerator pedal.
F Automatic gearbox: select position D, M
or R then press on the accelerator pedal.
Full release of the parking brake is confirmed
by:
-
-
the braking warning lamp and
the P warning lamp in the control
lever A going off,
display of the message "Parking
brake off".
When stationary, with the engine running, do
not press the accelerator pedal unnecessarily,
as you may release the parking brake.
Immobilising the vehicle,
engine running
With the engine running and the vehicle
stationary, in order to immobilise the vehicle
it is essential to manually apply the parking
brake by pulling control lever A.
The application of the parking brake is
confirmed by:
-
illumination of the braking warning
lamp and of the P warning lamp in
the control lever A,
-
display of the message "Parking
brake on".
When the driver’s door is opened, a loud beep
is heard and a message is displayed if the
parking brake has not been applied, unless the
gear lever is in position P (Park) in the case of
an automatic gearbox.
Particular situations
In certain situations (e.g. starting the engine),
the parking brake can automatically alter its
force. This is normal operation.
To advance your vehicle a few centimetres
without starting the engine, but with the ignition
on, press on the brake pedal and release the
parking brake by pushing then releasing
control lever A. The full release of the parking
brake is confirmed by the warning lamps in
the control lever A and in the instrument panel
going off and display of the message "Parking
brake off".
If a parking brake fault occurs while applied or
if the battery runs flat, an emergency release is
always possible.
In order to ensure correct operation and
so your safety, the number of successive
application/release operations of the parking
brake is limited to eight.
In the event of abuse, you are alerted by a
message "Parking brake faulty" and a warning
lamp flashes.
4
Before leaving the vehicle, check that
parking brake warning lamps in the
instrument panel and the control lever A
are on fixed, not flashing.
105
Driving
Emergency braking
In the event of a failure of the main service
brake, a continuous pull on the control lever A
will stop the vehicle.
The dynamic stability control provides stability
during emergency braking.
If the emergency braking malfunctions, the
message "Parking brake control faulty" will be
displayed.
If a failure of the DSC system is
signalled by the lighting of this
warning lamp, then braking stability is
not guaranteed.
In this event, stability must be assured by the
driver by repeating alternate "pull-release"
actions on the control lever A.
106
The emergency braking must only be
used in exceptional circumstances.
In the event of a battery failure, the
parking brake can no longer be
operated.
As a safety measure, if the parking
brake is not applied, immobilise the
vehicle by engaging a gear or by
placing a chock against one of the
wheels.
Contact a PEUGEOT dealer or a
qualified workshop.
Driving
Operating faults
If the electric parking brake fault warning lamp comes on together with one or more of the warning lamps presented in these tables, place the vehicle in
a safe condition (on level ground, gear engaged) and contact a PEUGEOT dealer or a qualified workshop without delay.
Situations
Consequences
Display of the message "Parking brake fault" and of the following
warning lamps:
-The automatic functions are deactivated.
- Hill start assist is not available.
-The electric parking brake can only be used manually.
Display of the message "Parking brake fault" and of the following
warning lamps:
-
Display of the message "Parking brake fault" and of the following
warning lamps:
-The automatic functions are deactivated.
- Hill start assist is not available.
4
Manual release of the electric parking brake is only available by
pressing the accelerator pedal and releasing the control lever.
- Hill start assist is not available.
-The automatic functions and the manual application are still
available.
107
Driving
Situations
and possibly
flashing.
Display of the message "Parking brake fault" and of the following
warning lamps:
Consequences
To apply the electric parking brake:
F immobilise the vehicle and switch off the ignition.
F pull the control for at least 5 seconds or until application is complete.
F switch on the ignition and check that the electric parking brake
warning lamps come on.
The application is slower than during normal operation.
To release the electric parking brake:
F switch on the ignition.
F push the control lever and hold it for approximately 3 seconds then
release it.
If the braking warning lamp is flashing or if the warning lamps do not
come on with the ignition on, these procedures will not work. Place the
vehicle on level ground and have it checked by a PEUGEOT dealer or a
qualified workshop.
-
Only the automatic application on switching off the engine and
automatic release on acceleration functions are available.
-The manual application/release of the electric parking brake and the
emergency braking are not available.
and possibly
flashing.
Display of the message "Battery charge fault".
-
-
108
You must stop as soon as it is safe to do so. Switch off and
immobilise your vehicle (if necessary, place the a chock under a
wheel).
Apply the electric parking brake before switching off the engine.
Driving
Manual parking brake
4
Application
Release
F With your foot on the brake pedal, pull the
parking brake lever up to immobilise your
vehicle.
F With your foot on the brake pedal, pull the
parking brake lever up gently, press the
release button then lower the lever fully.
When the vehicle is being driven,
if this warning lamp and the STOP
warning lamp come on, accompanied
by an audible signal and a message, indicating
that the parking brake is still on or has not been
fully released.
When parking on a slope, direct your
wheels against the kerb, apply the
parking brake, engage a gear with a
manual gearbox or position P with an
automatic gearbox and switch off the
ignition.
Pressing the brake pedal makes it
easier to apply or release the manual
parking brake.
109
Driving
6-speed manual gearbox
Engaging 5th or 6th gear
Engaging reverse gear
F Move the lever fully to the right to
engage 5th or 6th gear.
Only engage reverse gear when the
vehicle is stationary with the engine
at idle.
Failure to observe this procedure
may cause permanent damage to the
gearbox (engaging 3rd or 4th gear by
mistake).
As a safety precaution and to facilitate
starting of the engine:
- always select neutral,
- press the clutch pedal.
F Raise the ring under the knob and move
the gear lever to the left then forwards.
When driving on flooded roads or when
crossing a ford, drive at walking speed.
When traversing a flooded road or a
ford, drive at walking pace.
110
Driving
Gear shift indicator*
System which reduces fuel consumption by advising the driver to change up.
Operation
The system intervenes only when driving
economically.
Depending on the driving situation and your
vehicle's equipment, the system may advise
you to skip one or more gears. You can
follow this instruction without engaging the
intermediate gears.
The gear engagement recommendations must
not be considered compulsory. In fact, the
configuration of the road, the amount of traffic
and safety remain determining factors when
choosing the best gear. Therefore, the driver
remains responsible for deciding whether or not
to follow the advice given by the system.
This function cannot be deactivated.
With an electronic or automatic
gearbox, the system is only active in
manual mode.
* Depending on engine.
Example:
4
-
You are in third gear.
-The system may suggest that you engage
a higher gear, if appropriate.
The information appears in the instrument
panel in the form of an arrow accompanied by
the suggested gear.
-
You press the accelerator pedal
moderately.
In the case of driving which makes
particular demands on the performance
of the engine (firm pressure on the
accelerator pedal, for example, when
overtaking...), the system will not
recommend a gear change.
The system never suggests:
- engaging first gear,
- engaging reverse gear,
- engaging a lower gear.
111
Driving
"Porsche Tiptronic System" automatic gearbox
Six speed automatic gearbox which offers a
choice between the comfort of fully automatic
operation, enhanced by sport and snow
programmes, or manual gear changing.
Four driving modes are offered:
- automatic operation for electronic
management of the gears by the gearbox,
- sport programme for a more dynamic style
of driving,
- snow programme to improve driving when
traction is poor,
- manual operation for sequential changing
of the gears by the driver.
Gear lever
1. "S" (sport) programme switch.
2."T" (snow) programme switch.
112
Gear selection gate
P. Park.
- Immobilisation of the vehicle, parking brake
on or off.
- Starting the engine.
R. Reverse.
- Reversing manoeuvres, vehicle stationary,
engine at idle.
N. Neutral.
- Immobilisation of the vehicle, parking brake
on.
- Starting the engine.
D. Automatic operation.
M.+ / - Manual operation with sequential
changing of the six gears.
F Pull backwards to change up through the
gears.
or
F Push forwards to change down through the
gears.
Steering mounted controls
+. Control paddle to change up, to the right of
the steering wheel.
F Press the back of "+" steering mounted
paddle to change up.
-. Control paddle to change down, to the left of
the steering wheel.
F Press the back of the "-" steering mounted
paddle to change down.
The steering mounted control paddles
cannot be used to select neutral or to
select or come out of reverse.
Driving
Displays in the instrument
panel
When you move the lever in the gate to select a
position, the corresponding indicator comes on
in the instrument panel.
P.Park
R.Reverse
N.Neutral
D. Drive (Automatic driving)
S. Sport programme
T. Snow programme
1 to 6.Gear engaged during manual operation
-. Invalid value during manual operation
Moving off
F With your foot on the brake, select
position P or N.
F Start the engine.
If this procedure is not followed, an audible
signal is heard, accompanied by a message in
the instrument panel screen.
F With the engine running, press the brake
pedal.
F Release the parking brake, unless it is
programmed to automatic mode.
F Select position R, D or M,
FGradually release the brake pedal.
The vehicle moves off immediately.
If position N is engaged inadvertently
while driving, allow the engine to
return to idle then engage position D to
accelerate.
4
When the engine is running at idle, with
the brakes released, if position R, D or
M is selected, the vehicle moves even
without the accelerator being pressed.
When the engine is running, never
leave children in the vehicle without
supervision.
When carrying out maintenance with
the engine running, apply the parking
brake and select position P.
113
Driving
Automatic operation
F Select position D for automatic changing
of the six gears.
The gearbox then operates in auto-adaptive
mode, without any intervention on the part
of the driver. It continuously selects the most
suitable gear according to the style of driving,
the profile of the road and the load in the
vehicle.
For maximum acceleration without touching
the lever, press the accelerator pedal down
fully (kick down). The gearbox changes down
automatically or maintains the gear selected
until the maximum engine speed is reached.
On braking, the gearbox changes down
automatically to provide efficient engine
braking.
If you release the accelerator sharply, the
gearbox will not change to a higher gear for
safety reasons.
Sport and snow programmes
These two special programmes supplement the
automatic operation in very specific conditions
of use.
Sport "S"
F Press the "S" switch, after starting the
engine.
The gearbox automatically favours a dynamic
style of driving.
S appears in the instrument panel.
Snow "T"
F Press the "T" switch, after starting the
engine.
The gearbox adapts to driving on slippery
roads.
This programme improves starting and drive
when traction is poor.
T appears in the instrument panel.
Never select position N while the
vehicle is moving.
Never select positions P or R unless the
vehicle is completely stationary.
114
Return to automatic operation
F At any time, press the button selected
(S or "T") again at any time to quit the
programme engaged and return to autoadaptive mode.
Creep function
(moving without using
the accelerator)
This function provides great flexibility in
manoeuvring the vehicle at low speed (when
parking, in traffic jams, …).
With the engine at idle, parking brake released
and position D, M or R selected, the vehicle
moves as soon as you take your foot off
the brake pedal (even without pressing the
accelerator).
For your safety, this function will be activated
only if you press the brake pedal when
changing from forward drive to reverse.
It is deactivated on opening the driver's door.
Closing the door then pressing the brake or
accelerator pedal, reactivates the function.
Never leave children inside the vehicle
without supervision when the engine is
running.
Driving
Operating fault
Manual operation
F Select position M for sequential changing
of the six gears.
F Pull the lever towards the + sign to change
up a gear.
F Push the lever towards the - sign to change
down a gear.
It is only possible to change from one gear to
another if the vehicle speed and engine speed
permit; otherwise, the gearbox will operate
temporarily in automatic mode.
D disappears and the gears
engaged appear in succession in the
instrument panel.
If the engine speed is too low or too high, the
gear selected flashes for a few seconds, then
the actual gear engaged is displayed.
It is possible to change from position D
(automatic) to position M (manual) at any time.
When the vehicle is stationary or moving
very slowly, the gearbox selects gear M1
automatically.
The sport and snow programmes do not
operate in manual mode.
Invalid value during manual
operation
This symbol is displayed if a gear
is not engaged correctly (selector
between two positions).
Stopping the vehicle
Before switching off the engine, you can
engage position P or N to place the gearbox in
neutral.
In both cases, apply the parking brake to
immobilise the vehicle, unless it is programmed
to automatic mode.
If the lever is not in position P, when the
driver's door is opened or approximately
45 seconds after the ignition is switched
off, there is an audible signal and a
message appears.
F Return the lever to position P;
the audible signal stops and the
message disappears.
When the ignition is on, a
message appears in the
instrument panel screen to indicate a gearbox
fault.
In this case, the gearbox switches to back-up
mode and is locked in 3rd gear. You may feel
a substantial knock when changing from P
to R and from N to R. This will not cause any
damage to the gearbox.
Do not exceed 60 mph (100 km/h), local speed
restrictions permitting.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
4
You risk damaging the gearbox:
- if you press the accelerator and
brake pedals at the same time,
- if you force the lever from position P
to another position when the
battery is flat.
To reduce fuel consumption when
stationary for long periods with the
engine running (traffic jam...), position
the gear lever at N and apply the
parking brake, unless it is programmed
in automatic mode.
115
Driving
Electronic gearbox
Six-speed electronic gearbox which offers a
choice between the comfort of fully automatic
operation or the pleasure of manual gear
changing.
There are two driving modes:
- automated mode for automatic control of
the gears by the gearbox,
- manual mode for sequential gear changing
by the driver.
In automated mode, it remains possible to
change gear manually by using the steering
mounted control paddles when required, when
overtaking, for example.
This gearbox provides you with the benefit of
additional functions:
- hill start assist,
- the creep function (movement of the
vehicle on releasing the brake pedal) in
automated mode or reverse.
116
Gear lever
Steering mounted control
paddles
R. Reverse.
F With your foot on the brake, lift the lever
and push forwards.
N. Neutral.
F With your foot on the brake, select this
position to start.
A. Automated mode.
F Move the lever backwards to select this
mode.
M. Manual mode with sequential gear
changing.
F Move the lever to the left to select this
mode, then use the steering mounted
control paddles to change gear:
+. Change up paddle to the right of the
steering wheel.
F Press the back of the "+" steering mounted
paddle to change up a gear.
-. Change down paddle to the left of the
steering wheel.
F Press the back of the "-" steering mounted
paddle to change down a gear.
The steering mounted paddles cannot
be used to select neutral or to engage
or disengage reverse gear.
Driving
Displays in the instrument
panel
Moving off
Automated mode
F Select position N.
F Press the brake pedal down fully.
F Start the engine.
F After starting the vehicle, select position A
for enter automated mode.
N appears in the instrument panel
screen.
Gear lever positions
N. Neutral
R. Reverse
1, 2, 3, 4, 5, 6. Gears in manual mode
A. This comes on when the automatic mode
is selected. It switches off on changing to
manual mode.
F Place your foot on the brake
when a message appears in the
instrument panel screen.
Engagement of reverse gear is
accompanied by an audible signal.
N flashes in the instrument panel,
accompanied by an audible signal
and a message in the instrument
panel screen, if the gear lever is not in
position N on starting.
Foot on brake flashes on the
instrument panel, accompanied by an
audible signal and a message in the
instrument panel screen, if the brake
pedal is not pressed on starting.
F Select first gear (position M or A) or
reverse (position R).
F Release the parking brake unless it is
programmed to automatic mode.
FTake your foot off the brake pedal, then
accelerate.
A and the gear engaged appear in
the instrument panel screen.
The gearbox is then operating in auto-active
mode, without any action on the part of the
driver. It continuously selects the most suitable
gear, depending on the:
- style of driving,
- profile of the road.
4
For optimum acceleration, for example
when overtaking another vehicle, press
the accelerator pedal firmly past the
point of resistance.
A and 1 or R appears in the
instrument panel screen.
117
Driving
Manual gear changing
Manual mode
F When the vehicle has moved off, select
position M to change to manual mode.
FPull the lever towards the + sign to
change up a gear.
FPush the lever towards the - sign to
change down a gear.
A disappears and M appears with the
gears engaged successively, in the
instrument panel screen.
This selective gear change mode enables you
to overtake, for example, while still remaining in
automatic mode.
F Operate the + or - steering mounted control
paddle.
The gearbox engages the gear requested if the
engine speed permits. A is still displayed in the
instrument panel.
After a few moments without any action on
the controls, the gearbox resumes automatic
control of the gears.
118
The gear change commands are only carried
out if the engine speed permits.
It is not necessary to release the accelerator
during gear changes.
When braking or slowing down, the gearbox
changes down automatically to permit
acceleration in the correct gear.
At very low speed, if reverse gear
is requested, this will only be taken
into account when the vehicle is
immobilised. A warning lamp appears in
the instrument panel screen.
On sharp acceleration, the gearbox will
not change up unless the driver acts on
the gear lever or the steering mounted
paddles.
Never select neutral N while the vehicle
is moving.
Only engage reverse gear R when the
vehicle is immobilised with the brake
pedal pressed.
Driving
Creep function (moving
without pressing the
accelerator)
This function greatly facilitates manoeuvring
of the vehicle at low speed (when parking, in a
traffic jam…).
With the engine at idle, parking brake released
and position A, M or R selected, the vehicle
moves as soon as you take your foot off
the brake pedal (even without pressing the
accelerator pedal).
For your safety, this function is only activated
if you press the brake pedal when changing to
forward drive or reverse.
It is deactivated on opening the driver's door.
Closing the door and then pressing the brake or
accelerator pedal reactivates the function.
The vehicle does not move without
pressing the accelerator pedal if the
lever stays in position N for more than
2 seconds with the engine running, and
the brake pedal is not pressed before
selecting position A, M or R.
Stopping the vehicle
Operating fault
Before switching off the engine, you can
choose to:
- move to position N to engage neutral,
- leave the gear engaged; in this case, it will
not be possible to move the vehicle.
In both cases, you must apply the parking
brake to immobilise the vehicle.
With the ignition on, the
flashing of this warning lamp,
accompanied by an audible
signal and a message in the instrument panel
screen, indicates a malfunction of the gearbox.
have it checked by PEUGEOT or a qualified
workshop.
When immobilising the vehicle, with
the engine running, you must place the
gear lever in neutral N.
Before carrying out any work in the
engine compartment, check that the
gear lever is in neutral N and that the
parking brake is applied.
4
You must press the brake pedal when
starting the engine.
Whatever the circumstances, you must
manually apply the parking brake when
parking, unless the parking brake is
programmed in automatic mode.
Never leave children inside the vehicle
without supervision when the engine is
running.
119
Driving
Stop & Start
The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The
engine restarts automatically - START mode - as soon as you want to move off. The restart takes place instantly, quickly and silently.
Perfect for urban use, the Stop & Start system reduces fuel consumption and exhaust emissions as well as the noise level when stationary.
Special cases: STOP mode not
available
Operation
Going into engine STOP mode
The "ECO" indicator lamp comes
on in the instrument panel and the
engine goes into standby:
-
with a manual gearbox, at speeds below
12 mph (20 km/h), or vehicle stationary
with the e-THP 165 version, when you put
the gear lever into neutral and release the
clutch pedal,
- with an electronic gearbox, at speeds
below 5 mph (8 km/h), when you press the
brake pedal or you put the gear selector in
position N,
- with an automatic gearbox, vehicle
stationary, when you press the brake pedal
or you put the gear selector in position N.
If your vehicle is fitted with the system, a time
counter calculates the sum of the periods in
STOP mode during a journey. It rests itself to
zero every time the ignition is switched on with
the key.
120
For your comfort, during parking
maoeuvres, STOP mode is not
available for a few seconds after
coming out of reverse gear.
STOP mode does not affect the
functionality of the vehicle, such as for
example, braking, power steering...
Never refuel with the engine in STOP
mode; you must switch off the ignition
with the key.
STOP mode is not invoked when:
- the driver's door is open,
- the driver's seat belt is not fastened,
- the vehicle has not exceeded 6 mph
(10 km/h) since the last engine start using
the key,
- the vehicle is stopped on a steep slope
(up or down),
- the electric parking brake is applied or
being applied,
- the engine is needed to maintain a
comfortable temperature in the passenger
compartment,
- demisting is active,
- some special conditions (battery charge,
engine temperature, braking assistance,
ambient temperature...) where the engine is
needed to assure control of a system.
In this case, the "ECO" indicator
lamp flashes for a few seconds then
goes off.
This operation is perfectly normal.
Driving
Deactivation
Going into engine START mode
The "ECO" indicator lamp goes off
and the engine starts automatically:
-
-
-
with a manual gearbox, when you fully
depress the clutch pedal,
with an electronic gearbox:
● gear selector in position A or M, when
you release the brake pedal,
● or gear selector in position N and brake
pedal released, when you put the gear
selector in position A or M,
● or when you engage reverse gear.
with an automatic gearbox:
● gear selector in position D or M, when
you release the brake pedal,
● or gear selector in position N and brake
pedal released, when you put the gear
selector in position D or M,
● or when you engage reverse gear.
Special cases: START invoked
automatically
START mode is invoked automatically when:
- the driver's door is open,
- the driver's seat belt is not fastened,
- the speed of the vehicle exceeds
18 mph (25 km/h) with a manual gearbox,
2 mph (3 km/h) with the THP 165 version),
7 mph (11 km/h) with an electronic gearbox
or 2 mph (3 km/h) with an automatic
gearbox,
- the electric parking brake is being applied,
- some special conditions (battery charge,
engine temperature, braking assistance,
ambient temperature...) where the engine is
needed for control of a system.
4
At any time, press the "ECO OFF" switch to
deactivate the system.
This is confirmed by the indicator lamp in the
switch coming on accompanied by a message
in the screen.
If the system has been deactivated
in STOP mode, the engine restarts
immediately.
In this case the "ECO" indicator lamp
flashes for a few seconds, then
goes off.
This operation is perfectly normal.
121
Driving
Reactivation
Operating fault
Press the "ECO OFF" switch again.
The system is active again; this is confirmed by
the indicator lamp in the switch going off and a
message in the screen.
Before doing anything under the
bonnet, deactivate the Stop & Start
system to avoid any risk of injury
resulting from automatic operation of
START mode.
The system is reactivated automatically
at every new start using the key.
In the event of a fault with the system, the
indicator lamp in the "ECO OFF" switch
flashes then comes on continuously.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
In the event of a fault in STOP mode, the
vehicle may stall: all the instrument panel
warning lamps come on. It is then necessary
to switch off the ignition and start the engine
again using the key.
When driving on flooded roads or
crossing a ford, switch off the
Stop & Start and drive at walking speed.
122
Maintenance
This system requires a 12 V battery with a
special specification and technology (reference
numbers available from PEUGEOT dealers).
Fitting a battery not listed by
PEUGEOT introduces the risk of malfunction of
the system.
To charge the battery, use a 12 V charger and
observe the polarity.
The Stop & Start system makes use of
advanced technology. For any work on
the system go to a qualified workshop
with the skills and equipment required,
which a PEUGEOT dealer is able to
provide.
Driving
Hill start assist
System which keeps your vehicle immobilised
temporarily (approximately 2 seconds) when
starting on a gradient, the time it takes to
move your foot from the brake pedal to the
accelerator pedal.
This system only operates when:
- the vehicle is completely stationary, with
your foot on the brake pedal,
- in particular conditions on a slope,
- with the driver’s door closed.
The hill start assist system cannot be
deactivated.
Do not exit the vehicle while it is being
held in the hill start assist phase.
If you need to exit the vehicle with the
engine running, apply the parking brake
manually then ensure that the parking
brake warning lamp (and the warning
lamp P in the lever of the electric
parking brake) are on fixed
(not flashing).
Operation
4
On an ascending slope, with the vehicle
stationary, the vehicle is held for a
momentarily when you release the brake
pedal:
- provided you are in first gear or neutral on
a manual gearbox,
- provided you are in position A or M on an
electronic gearbox,
- provided you are in position D or M on an
automatic gearbox.
On a descending slope, with the vehicle
stationary and reverse gear engaged, the
vehicle is held momentarily when you
release the brake pedal.
Operating fault
If a fault in the system occurs, these warning
lamps come on. Contact a PEUGEOT dealer
or a qualified workshop to have the system
checked.
123
Driving
Head-up display
System which projects various information onto
a smoked strip in the field of vision of the driver
so that they do not have to take their eyes off
the road.
Buttons
Displays during operation
This system operates when the engine is
running and the settings are stored when the
ignition is switched off.
1.
2.
3.
4.
Head-up display on.
Head-up display off (long press).
Brightness adjustment.
Display height adjustment.
Once the system has been activated, the
following information is grouped together in the
head-up display:
A.The speed of your vehicle.
B. Cruise control/speed limiter information.
C. Navigation information (according to
version).
For more information on the navigation
system, refer to the "Audio and
telematic" section.
124
Driving
Activation / Deactivation
Brightness adjustment
We recommend that adjustments are
made using these buttons only when
the vehicle is stationary.
When stationary or while driving, no
objects should be placed around the
strip (or in its recess) so as to not
impede deployment of the strip and its
correct operation.
F With the engine running, press button 1 to
activate the system and deploy the strip.
F Press and hold button 2 to deactivate the
system and retract the strip.
The activated/deactivated state is saved and
restored on restarting the engine.
Height adjustment
F With the engine running, adjust the display
to the desired height using buttons 4:
- up to move the display up,
- down to move the display down.
F With the engine running, adjust the
brightness of the information displayed
using buttons 3:
- the "sun" to increase the brightness,
- the "moon" to decrease the brightness.
4
In certain extreme weather conditions
(rain and/or snow, bright sunshine, ...)
the head-up display may not be legible
or may suffer temporary interference.
Some sunglasses may hamper reading
of the information.
To clean the strip, use a clean, soft
cloth (such as a spectacles cloth or
microfibre cloth). Do not use a dry or
abrasive cloth or detergent or solvent
products as these could scratch the
strip or damage the non-reflective
coating.
125
Driving
Blind spot sensors
This driving assistance system warns the driver
of the presence of another vehicle in the blind
spot angle of their vehicle (areas masked from
the driver's field of vision), as soon as this
presents a potential danger.
126
A warning lamp appears in the door mirror on
the side in question:
- immediately, when being overtaken,
- after a delay of about one second, when
overtaking a vehicle slowly.
This system is designed to improve
safety when driving and is in no
circumstances a substitute for the use
of the interior rear view mirror and door
mirrors. It is the driver's responsibility
to constantly check the traffic, to asses
the distances and relative speeds
of other vehicles and to predict their
movements before deciding whether to
change lane.
The blind spot sensor system can never
replace the vigilance and responsibility
of the driver.
Driving
Operation
F On switching on the ignition, or
engine running, press this button
to activate the function; the
warning lamp comes on.
With audio system or for HYbrid4 version
With touch screen
Sensors fitted in the front and rear bumpers
monitor the blind spots.
The alert is given by a warning lamp which
comes on in the door mirror on the side in
question as soon as a vehicle - car, lorry,
cycle - is detected and the following conditions
are fulfilled:
- all the vehicles must be moving in the
same direction,
- the speed of your vehicle is between 7 and
75 mph (12 and 140 km/h),
- the difference in speed between your
vehicle and the other vehicles must be less
than 6 mph (10 km/h),
- the traffic must be flowing normally,
- in the case of an overtaking manoeuvre,
if this is prolonged and the vehicle being
overtaken remains in the blind spot,
- you are driving on a straight or slightly
curved road,
- your vehicle is not pulling a trailer, a
caravan...
4
No alert will be given in the following situations:
- in the presence of stationary objects
(parked vehicles, barriers, street lamps,
road signs...),
- with vehicles moving in the opposite
direction,
- driving on a sinuous road or a sharp
corner,
127
Driving
Operating fault
FTo deactivate the system, press
this button again; the warning
lamp goes off.
The state of the system remains in memory on
switching off the ignition.
The system is automatically deactivated
when towing with a towbar approved by
PEUGEOT.
-
-
-
128
when overtaking (or being overtaken by) a
very long vehicle (lorry, coach...) which is
at the same time detected at the rear in the
blind spot angle and present in the driver's
forward field of vision,
in very heavy traffic: vehicles detected in
front and behind are confused with a lorry
or a stationary object,
when overtaking quickly.
In the event of a fault, the warning
lamp in the button flashes then
goes off.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
The system may suffer temporary
interference in certain weather
conditions (rain, hail...).
In particular, driving on a wet surface
or moving from a dry area to a wet area
can cause false alerts (for example, the
presence of a fog of water droplets in
the blind spot angle is interpreted as a
vehicle).
In bad or wintry weather, ensure that
the sensors are not covered by mud, ice
or snow.
Take care not to cover the warning zone
in the door mirrors or the detection
zones on the front and rear bumpers
with adhesive labels or other objects;
they may hamper the correct operation
of the system.
Driving
Memorising speeds
This memorising of speeds applies to both the speed limiter and the cruise control.
Operation
Selection
F Select "Activation" to use the memorised
speeds.
F Select the speed M1 to M5 that you want to
use.
F Move the cursor to the desired value then
press "CONFIG" to modify it.
F Select "OK" and confirm to save the
modifications.
You can memorise up to 5 speeds in the
system.
By default, some speeds are already
memorised.
FGo to the "Main menu" in the instrument
panel screen by pressing the "CONFIG"
button.
F Select the "Vehicle parameters" menu
and confirm.
F Select the "Driving assistance" line and
conform.
F Select the "Speeds memorised" line and
confirm.
To select a memorised speed:
F press and hold the "+"
or "-" button; the system
stops at the nearest
memorised speed,
4
F press and hold again the "+" or "-" button to
select another memorised speed.
A reminder of the speed and the state of the
system (on / off) is displayed in the instrument
panel.
For safety reasons, the driver must
carry out these operations when
stationary, using the instrument panel
screen.
These operations are only possible
when stationary.
129
Driving
Speed limiter
System which prevents the vehicle from
exceeding the speed programmed by the
driver.
When the programmed speed limit is reached,
pressing the accelerator pedal no longer
has any effect unless it is pressed firmly,
which allows you to temporarily exceed the
programmed speed.
To return to the programmed speed, simply
slow down to a speed below the programmed
speed by releasing the accelerator.
The speed limiter is switched on manually:
it requires a programmed speed of at least
20 mph (30 km/h).
The speed limiter is switched off by manual
operation of the control.
The programmed speed remains in the memory
when the ignition is switched off.
The speed limiter cannot, in any
circumstances, replace the need to
observe speed limits, nor can it replace
the need for vigilance and responsibility
on the part of the driver.
130
Steering mounted controls
Displays in the instrument
panel
The programmed information is grouped
together in the instrument panel screen.
1.
2.
3.
4.
5.
Speed limiter mode selection button
Programmed value decrease button
Programmed value increase button
Suspend/restore speed limiter (pause)
Speed limiter off button
This information also appears in the
head-up display.
For more information, refer to the
"Head-up display" section.
A. Speed limiter on / pause indication
B. Speed limiter mode selection indication
C. Programmed speed value
Driving
Programming
FPress 1, the speed limiter mode is
activated but remains paused.
You do not have to switch the speed limiter
on in order to set the speed.
F Set the speed value by pressing
button 2 or 3 (e.g.: 55 mph (90 km/h)).
You can then change the programmed speed using buttons 2 and 3:
- by + or - 1 mph (km/h) = short press,
- by + or - 5 mph (km/h) = long press,
- in steps of + or - 5 mph (km/h) = maintained press.
F Switch the speed limiter on by pressing button 4.
F Suspend the speed limiter by pressing button 4: the screen
confirms the suspension with "Pause".
F Switch the speed limiter back on by pressing button 4 again.
Exceeding the programmed speed
Pressing the accelerator pedal to exceed the programmed speed will
not have any effect unless you press the pedal firmly past the point of
resistance.
The speed limiter is deactivated temporarily and the programmed
speed, which is still displayed, flashes.
Returning to the programmed speed, by means of intentional or
unintentional deceleration of the vehicle, automatically cancels the
flashing of the programmed speed.
Off / Return to normal
driving
FPress 5, the speed limiter is deactivated.
Operating fault
4
In the event of a speed limiter fault, the speed
is cleared resulting in flashing of the dashes.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
On a steep descent or in the event of
sharp acceleration, the speed limiter
will not be able to prevent the vehicle
from exceeding the programmed speed.
The use of mats not approved by
PEUGEOT may adversely affect the
normal operation of the accelerator
pedal and impede the operation of the
speed limiter.
Mats approved by PEUGEOT have a
third fixing in the area of the pedals to
avoid any risk of interference with the
pedals.
131
Driving
Cruise control
System which automatically maintains the
speed of the vehicle at the value programmed
by the driver, without any action on the
accelerator pedal.
The cruise control is switched on manually: it
requires a minimum vehicle speed of 25 mph
(40 km/h) and the engaging:
- 4th gear or higher with a manual gearbox,
- 2nd gear or higher with an electronic or
automatic gearbox,
-position A with an electronic gearbox or D
with an automatic gearbox.
The cruise control is switched off manually
or by pressing the brake or clutch pedal or
on triggering of the ESC system for safety
reasons.
It is possible to exceed the programmed speed
temporarily by pressing the accelerator pedal.
To return to the programmed speed, simply
release the accelerator pedal.
Switching off the ignition cancels any
programmed speed value.
132
Steering mounted controls
Displays in the instrument
panel
The programmed information is grouped
together in the instrument panel screen.
1. Cruise control mode selection button
2. Speed programming / programmed value
decrease button
3. Speed programming / programmed value
increase button
4. Cruise control suspension / resume button
(pause)
5. Cruise control off button
The cruise control cannot, in any circumstances,
replace the need to observe speed limits,
nor can it replace the need for vigilance and
responsibility on the part of the driver.
This information also appears in the
head-up display.
For more information, refer to the
"Head-up display" section.
A. Cruise control on / pause indication
B. Cruise control mode selection indication
C. Programmed speed value
Driving
Programming
Operating fault
FPress 1, the cruise control is activated
but remains paused.
F Set the programmed speed by
accelerating to the required speed, then
press button 2 or 3 (e.g.: 70 mph
(110 km/h)).
You can then change the programmed speed using buttons 2 and 3:
- by + or - 1 mph (km/h) = short press,
- by + or - 5 mph (km/h) = long press,
- in steps of + or - 5 mph (km/h) = maintained press.
FPause the cruise control by pressing button 4: the screen
confirms the suspension with with "Pause".
FSwitch the cruise control back on by pressing button 4 again.
Exceeding the programmed speed
Intentional or unintentional exceeding of the programmed speed
results in flashing of this speed on the display.
Return to the programmed speed, by means of intentional or
unintentional deceleration of the vehicle, automatically cancels the
flashing of the speed.
Off / Return to normal driving
In the event of a cruise control fault, the speed
is cleared resulting in flashing of the dashes.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
4
When the cruise control is switched on,
be careful if you maintain the pressure
on one of the programmed speed
changing buttons: this may result in a
very rapid change in the speed of your
vehicle.
Do not use the cruise control on
slippery roads or in heavy traffic.
On a steep descent, the cruise control
will not be able to prevent the vehicle
from exceeding the programmed speed.
To avoid any risk of jamming of the
pedals:
- ensure that the mat is positioned
correctly,
- never fit one mat on top of another.
FPress 5; cruise control mode is deactivated The screen returns to
the distance recorder.
133
Driving
Parking sensors
Rear parking sensors
The system is switched on by engaging reverse
gear. This is accompanied by an audible signal.
The system is switched off when you come out
of reverse gear.
This system indicates the proximity of an
obstacle (person, vehicle, tree, gate, etc.)
which comes within the field of detection of
sensors located in the bumper.
Certain types of obstacle (stake, roadworks
cone, etc.) detected initially will no longer be
detected at the end of the manoeuvre due to
the presence of blind spots.
This function cannot, in any
circumstances, take the place of the
vigilance and responsibility of the driver.
134
Visual assistance
This supplements the audible signal by
displaying bars in the multifunction screen
which move progressively nearer to the vehicle.
When the obstacle is near, the "Danger"
symbol is displayed in the screen.
Audible assistance
The proximity information is given by an
intermittent audible signal, the frequency of
which increases as the vehicle approaches the
obstacle.
The sound emitted by the speaker (right or
left) indicates the side on which the obstacle is
located.
When the distance between the vehicle and
the obstacle becomes less than approximately
thirty centimetres, the audible signal becomes
continuous.
Driving
Front parking sensors
Deactivation / Activation of the
front and rear parking sensors
In addition to the rear parking sensors, the
front parking sensors are triggered when an
obstacle is detected in front and the speed of
the vehicle is still below 6 mph (10 km/h).
The front parking sensors are interrupted if
the vehicle stops for more than three seconds
in forward gear, if no further obstacles are
detected or when the speed of the vehicle
exceeds 6 mph (10 km/h).
The sound emitted by the speaker (front
or rear) indicates whether the obstacle
is in front or behind.
4
With audio system or for HYbrid4 version
With touch screen
The function is deactivated by pressing this button. The indicator lamp in the button comes on.
Pressing this button again reactivates the function. The indicator lamp in the button goes off.
The function will be deactivated
automatically if a trailer is being towed
or a bicycle carrier is fitted (vehicle
fitted with a towbar or bicycle carrier
recommended by PEUGEOT).
135
Driving
Operating fault
In the event of a malfunction
of the system, when reverse
gear is engaged this warning
lamp is displayed in the instrument panel
and/or a message appears in the screen,
accompanied by an audible signal (short beep).
Contact a PEUGEOT dealer or a qualified
workshop.
In bad weather or in winter, ensure
that the sensors are not covered with
mud, ice or snow. When reverse gear is
engaged, an audible signal (long beep)
indicates that the sensors may be dirty.
Certain sound sources (motorcycle,
lorry, pneumatic drill, etc.) may trigger
the audible signals of the parking
sensor system.
136
Driving
Reversing camera
4
The reversing camera is activated automatically
when reverse gear is engaged.
Depending on version, the image is displayed
in the touch screen or the instrument panel.
The reversing camera function completes the
parking assistance.
The reversing camera cannot in any
circumstances be a substitute for the
vigilance and responsibility of the driver.
The superimposed representation of
guide lines helps with the manoeuvre.
They are represented by lines marked
"on the ground" and do not allow the
position of the vehicle to be determined
relative to tall obstacles (for example:
other vehicles, ...).
The blue lines represent the general direction
of the vehicle (the difference corresponds to
the width of your vehicle without the mirrors).
The red lines represent a distance of about
30 cm beyond the edge of your vehicle's rear
bumper.
The green lines represent distances of about
1 and 2 metres beyond the edge of your
vehicle's rear bumper.
The turquoise blue curves represent the
maximum turning circle.
Opening the boot causes the display to
disappear.
Clean the reversing camera regularly
using a soft, dry cloth.
High pressure jet washing
When washing your vehicle, do not direct the
lance within 30 cm of the camera lens.
137
Visibility
Lighting controls
Controls for selection and operation of the various front and rear lamps providing the vehicle's lighting and signalling.
138
Main lighting
Additional lighting
There are various lamps on the vehicle:
- sidelamps, to be seen,
- dipped beam headlamps to see without
dazzling other drivers,
- main beam headlamps to see clearly when
the road is clear,
- directional headlamps for improved
visibility when cornering.
Other lamps are installed to fulfil the
requirements of particular driving conditions:
- rear foglamps to better signal the presence
of the vehicle in foggy conditions,
- front foglamps for better visibility in foggy
conditions and to improve lighting at
intersections and when parking,
- daytime running lamps to be seen during
the day.
Automatic lighting
functions
Various automatic lighting functions are also
available depending on options:
- guide-me-home lighting,
- main additional lighting,
- secondary additional lighting,
- welcome lighting,
- daytime running lamps,
- automatic illumination of headlamps,
- adaptive lighting.
Visibility
Selection ring for main lighting
mode
Turn the ring to position the symbol required
facing the mark.
5
Lighting off.
Automatic illumination of headlamps.
Sidelamps only.
Dipped or main beam headlamps.
Model without AUTO lighting
Dipping the headlamps
Pull the stalk to switch the lighting between
dipped / main beam headlamps.
In the lighting off and sidelamps modes, the
driver can switch on the main beam headlamps
temporarily ("headlamp flash") by maintaining a
pull on the stalk.
Displays
Illumination of the corresponding indicator lamp
in the instrument panel confirms the lighting
switched on.
Model with AUTO lighting
139
Visibility
Foglamp selection ring
The foglamps operate with dipped and main beam headlamps.
In good or rainy weather, both day
and night, the front foglamps and the
rear foglamps are prohibited. In these
situations, the power of their beams
may dazzle other drivers. They should
only be used in fog or snow.
In these weather conditions, it is your
responsibility to switch on the foglamps
and dipped headlamps manually as the
sunshine sensor may detect sufficient
light.
Do not forget to switch off the front
foglamps and the rear foglamps when
they are no longer needed.
Front and
rear foglamps
Rotate and release the ring:
F forwards a first time to switch on the front
foglamps,
F forwards a second time to switch on the
rear foglamps,
F rearwards a first time to switch off the rear
foglamps,
F rearwards a second time to switch of the
front fog lamps.
140
When the headlamps switch off with automatic
illumination of headlamps (AUTO model)
or when the dipped beam headlamps are
switched off manually, the foglamps and
sidelamps remain on.
FTurn the ring rearwards to switch off the
foglamps, the sidelamps will then switch
off.
Visibility
Daytime running lamps
Lighting left on audible
signal
An audible signal when a front door
is opened warns the driver that the
vehicle's exterior lighting is on, with the
ignition off and in manual lighting mode.
In this case, switching off the lighting
stops the audible signal.
With the ignition off, if the dipped
headlamps remain on, the vehicle goes
into "ECO" mode to avoid discharging
the battery.
In some weather conditions (e.g. low
temperature or humidity), the presence
of misting on the internal surface of the
glass of the headlamps and rear lamps
is normal; it disappears after the lamps
have been on for a few minutes.
Daytime lighting, compulsory in certain
countries, which comes on automatically when
the engine is started making the vehicle more
visible to other road users.
This function is assured:
- in countries where it is imposed by
regulations, by illumination of the dipped
beam headlamps with the sidelamps and
number plate lamps.
- for other countries where it is provided, by
the use of dedicated lamps.
5
The lighting goes off when you switch
off the ignition, but you can always
switch it on again using the lighting
control stalk.
141
Visibility
Manual guide-me-home
lighting
Temporarily keeping the dipped beam
headlamps on after the ignition has been
switched off makes the driver's exit easier
when the light is poor.
Switching on
F Within 30 seconds or a minute after
switching of the ignition (according to the
lighting duration programmed in the main
menu of the instrument panel), "flash" the
headlamps using the lighting stalk.
F A further "headlamp flash" switches the
function off.
Switching off
The manual guide-me-home lighting switches
off automatically after about 30 seconds.
142
Parking lamps
Programming
The duration of the guide-mehome lighting is is set in the Main
menu of instrument panel screen.
Select "Vehicle parameters" then
"Lighting", then change the lighting duration.
Side markers for the vehicle by illumination of
the sidelamps on the traffic side only.
F Within one minute of switching off the
ignition, operate the lighting control stalk
up or down depending on the traffic side
(for example: when parking on the left;
lighting control stalk upwards; the right
hand sidelamps are on).
This is confirmed by an audible signal and
illumination of the corresponding direction
indicator warning lamp in the instrument panel.
To switch off the parking lamps, return the
lighting control stalk to the middle position or
switch on the ignition.
Visibility
Automatic illumination of
headlamps
The sidelamps and dipped beam headlamps are
switched on automatically, without any action
on the part of the driver, when a low level of
external light is detected or in certain cases of
activation of the windscreen wipers.
As soon as the brightness returns to a sufficient
level or after the windscreen wipers are switched
off, the lamps are switched off automatically.
Activation
F Turn the ring to the "AUTO" position. The automatic
illumination of headlamps is accompanied by a
message in the instrument panel screen.
Association with automatic
guide-me-home lighting
Association with automatic illumination of
headlamps provides the guide-me-home
lighting with the following additional options:
- selection of the lighting duration of 15,
30 or 60 seconds,
- automatic activation of guide-me-home
lighting when the automatic illumination of
headlamps is in operation.
Operating fault
In the event of a fault with the
sunshine sensor, the lighting
comes on, this warning
lamp is displayed in the instrument panel and/
or a message appears in the instrument panel
screen, accompanied by an audible signal.
Contact a PEUGEOT dealer or a qualified
workshop.
5
In fog or snow, the sunshine sensor
may detect sufficient light. In this
case, the lighting will not come on
automatically.
Do not cover the sunshine sensor,
coupled with the rain sensor and
located in the centre of the windscreen
behind the rear view mirror; the
associated functions would no longer
be controlled.
Deactivation
FTurn the ring to another position.
Deactivation is accompanied by a message
in the instrument panel screen.
143
Visibility
Adaptive lighting
System which automatically changes between
dipped and main beam according to the driving
conditions, using a sensor in the rear view
mirror.
The system is active from 15 mph (25 km/h)
and is deactivated below 9 mph (15 km/h).
Switching on
F Put the lighting control stalk on the "AUTO"
or "Dipped/main beam headlamps"
position.
F Press this button, the
indicator lamp comes on.
144
Switching off
The driver can take over at any time, if the
circumstances dictate:
F Press this button, the
indicator lamp goes off,
or
F Dipping the headlamps
manually using the lighting
control stalk, whether in the
"AUTO" or "Dipped/main
beam headlamps" position.
Flashing the headlamps does not
deactivate the system.
The state of the system is stored in
memory when switching off the ignition.
This automatic headlamp dipping
system is a driving aid. The driver
remains responsible for the vehicle's
lighting and its correct use for the
prevailing conditions of light, visibility
and traffic.
The system may suffer interference or
not work correctly:
- under conditions of poor visibility
(for example, snowfall, heavy rain
or thick fog, ...),
- if the windscreen is dirty, misted or
obscured (by a sticker, ...) in front of
the sensor,
- if the vehicle is facing highly
reflective signs.
The system is not able to detect:
- road users that do not have their
own lighting, such as pedestrians,
- road users whose lighting is
obscured, such as vehicles running
behind a safety barrier (on a
motorway, for example),
- road users at the top or bottom of
a steep slope, on twisty roads, on
crossroads.
Visibility
Exterior welcome
lighting
Door mirror
spotlamps
Remote switching on of the lighting makes your
approach to the vehicle easier in poor light. It is
activated according to the level of light detected
by the sunshine sensor.
Switching on
5
F Press the open padlock on the
remote control.
The dipped beam headlamps and the
sidelamps come on; your vehicle is
also unlocked.
Switching off
The exterior welcome lighting switches off
automatically after a set time, when the ignition
is switched on or on locking the vehicle.
Programming
The activation/deactivation and
lighting duration are set in the Main
menu of instrument panel screen.
Select "Vehicle parameters" then
"Lighting", then change the lighting
duration.
To make your approach to the vehicle easier,
these illuminate:
- the zones facing the driver’s and
passenger’s doors,
- the zones forward of the door mirrors and
rearward of the front doors.
Switching on
The spotlamps come on:
- when you unlock the vehicle,
- when you remove the key from the ignition,
- when you open a door,
- when you use the remote control.
Switching off
They are timed to go off automatically.
145
Visibility
Manual adjustment
of halogen
headlamps
Automatic adjustment of "full LED"
technology headlamps
To avoid causing a nuisance to other road
users, the beams of the halogen headlamps
should be adjusted according to the load in the
vehicle.
0 Driver or driver + front passenger.
- Driver + front passenger + rear
passengers.
1 5 people.
- 5 people + a load in the boot.
2 Driver + a load in the boot.
In order to avoid causing a nuisance to other
road users, this system corrects the height of
the "full LED" headlamps beam automatically,
in relation to the load in the vehicle.
The initial setting is position "0".
146
If a fault occurs, this
warning lamp is displayed
in the instrument panel,
accompanied by an audible signal and a
message in the instrument panel screen.
The system then places your headlamps in the
lowest position.
If a fault occurs, do not touch the "full
LED" bulbs. Contact a PEUGEOT
dealer or a qualified workshop.
Travelling abroad
The design of the dipped beam
headlamps allows, without modification,
driving in a country that drives on the
other side of the road to the country in
which your vehicle was sold.
Visibility
Additional headlamps
Operation
This system operates from a certain angle of
rotation of the steering wheel.
With dipped or main beam on, this system uses
LEDs (light-emitting diodes) to illuminate the
inside of a bend.
The speed of the vehicle must be below
75 mph (120 km/h).
This function is a available only with "full-LED"
headlamps.
System inactive
5
The system does not operate:
- below a certain angle of rotation of the
steering wheel,
- above 75 mph (120 km/h),
- when reverse gear is engaged.
147
Visibility
Secondary additional headlamps
With dipped or main beams, this function
makes use of the beam from a front
foglamp to illuminate the inside of a bend,
when the vehicle speed is below 25 mph
(approximately 40 km/h).
This additional lighting is particularly useful in
town, at intersections, on very winding roads,
when parking, ...
148
Switching on
Switching off
This function starts
- when the direction indicator is switched
on (the foglamp on the same side is
switched on),
or
- from a certain angle of rotation of the
steering wheel.
The system is deactivated:
- below a certain angle of rotation of the
steering wheel,
- when switching off the direction indicator,
Programming
The system is activated or deactivated in the
Main menu, select "Vehicle parameters",
then "Lighting", then activate/deactivate
The system is activated by default.
Visibility
Wiper controls
The vehicle's front and rear wipers are
designed to improve the driver's visibility
progressively according to the climatic
conditions.
Manual controls
The wipers are controlled directly by the driver.
Windscreen wipers
Programming
Wiping speed:
Various automatic wiper control modes are also
available according to the following options:
- automatic rain sensitive windscreen wipers,
- rear wiping on engaging reverse gear.
fast (heavy rain),
normal (moderate rain),
intermittent (proportional to the
speed of the vehicle),
5
park,
Model with manual wiping
(intermittent)
single wipe (press down and
release),
automatic (press down and
release),
single wipe (pull the stalk
briefly towards you).
Model with AUTO wiping
149
Visibility
Windscreen and headlamp
wash
park,
intermittent wipe,
wash-wipe (set duration).
Rear wiper
Reverse gear
Rear wiper selection ring:
When reverse gear is engaged, the rear wiper
will come into operation if the windscreen
wipers are operating.
If a significant accumulation of snow or
ice is present, or when using a bicycle
carrier on the boot, deactivate the
automatic rear wiper via the instrument
panel screen configuration menu.
150
Programming
The function is activated or
deactivated via the instrument panel
screen configuration menu.
This function is activated by default.
F Pull the windscreen wiper stalk towards
you for a few seconds. The windscreen
wash then the windscreen wipers operate
for a fixed period.
The headlamp washers only operate when
the dipped beam headlamps are on and the
vehicle is moving.
Visibility
Automatic rain sensitive
windscreen wipers
Screenwash/headlamp wash
level low
The windscreen wipers operate automatically, without any action on the part of the driver, if rain is
detected (sensor behind the rear view mirror), adapting their speed to the intensity of the rainfall.
In the case of vehicles fitted
with headlamp washers,
when the fluid reservoir low
level is reached this warning lamp comes on
in the instrument panel, accompanied by an
audible signal and a message in the instrument
panel screen.
The warning lamp comes on when the ignition is
switched on, or every time the stalk is operated,
until the reservoir is refilled.
Next time you stop, refill the screenwash /
headlamp wash reservoir.
5
Switching on
Briefly push the control stalk
downwards.
A wiping cycle confirms that the
instruction has been accepted.
This warning lamp comes on in the
instrument panel and a message is
displayed.
Switching off
Briefly push the control stalk
downwards again, or place the control
stalk in another position (Int, 1 or 2).
This warning lamp goes off in the
instrument panel and a message is
displayed.
The automatic rain sensitive windscreen
wipers must be reactivated by pushing
the control stalk downwards, if the
ignition has been off for more than
one minute.
151
Visibility
Special position of the
windscreen wipers
Operating fault
If a fault occurs with the automatic rain
sensitive wipers, the wipers will operate in
intermittent mode.
Have it checked by PEUGEOT dealer or a
qualified workshop.
Do not cover the rain sensor, linked with
the sunshine sensor and located in the
centre of the windscreen behind the rear
view mirror.
Switch off the automatic rain sensitive
wipers when using an automatic car wash.
In winter, it is advisable to wait until the
windscreen is completely clear of ice
before activating the automatic rain
sensitive wipers.
152
This position permits release of the windscreen
wiper blades.
It is used for cleaning or replacement of the
blades. It can also be useful, in winter, to
detach the blades from the windscreen.
F Any action on the wiper stalk in the minute
after switching off the ignition places the
blades vertically on the screen.
FTo park the blades again, switch on the
ignition and operate the wiper stalk.
To maintain the effectiveness of the
"flat-blade" type of wiper blades, it is
advisable to:
- handle them with care,
- clean them regularly using soapy
water,
- avoid using them to retain
cardboard on the windscreen,
- replace them at the first signs of
wear.
Visibility
Courtesy lamps
Front courtesy lamps
In this position, the courtesy lamp
comes on gradually:
-
-
-
-
when the vehicle is unlocked,
when the key is removed from the ignition,
when opening a door,
when the remote control locking button is
activated, in order to locate your vehicle.
It switches off gradually:
- when the vehicle is locked,
- when the ignition is switched on,
- 30 seconds after the last door is closed.
1.
2.
3.
4.
Front courtesy lamp
Front map reading lamps
Rear map reading lamps
Interior mood LEDs
Permanently off.
Front and rear map reading
lamps
F With the ignition on, press the
corresponding switch.
When the front courtesy lamp is on "permanent
lighting", the rear map reading lamp comes on
as well, unless it is "permanently off".
From the front, you can deactivate the rear map
reading lamps so as to not disturb sleeping
rear passengers, for example. However, the
rear passengers can force the illumination of
a lamp.
5
Take care to avoid leaving anything in
contact with the courtesy lamps.
Permanent lighting.
With the "permanent lighting" mode, the lighting
time varies according to the circumstances:
- with the ignition off, approximately
ten minutes,
- in energy economy mode,
approximately thirty seconds,
- with the engine running, unlimited.
153
Visibility
Interior mood lighting
The dimmed passenger compartment lighting improves visibility in the vehicle when the light is
poor.
154
Switching on
Switching off
At night, interior mood light emitting diodes LEDs come on automatically when the
sidelamps are switched on.
The interior mood lighting switches off
automatically when the sidelamps are switched
off.
It can be switched off manually by adjusting the
instrument panel lighting dimmer button to the
lowest setting.
Child safety
General points relating to child seats
Although one of PEUGEOT main criteria when designing your vehicle, the safety of your children
also depends on you.
For maximum safety, please observe the
following recommendations:
- in accordance with European regulations,
all children under the age of 12 or less
than one and a half metres tall must
travel in approved child seats suited to
their weight, on seats fitted with a seat
belt or ISOFIX mountings*,
- statistically, the safest seats in your
vehicle for carrying children are the
rear seats,
- a child weighing less than 9 kg must
travel in the "rearward facing" position
both in the front and in the rear.
PEUGEOT recommends that children
should travel in the outer rear seats of
your vehicle:
- "rearward facing" up to the age of 3,
- "forward facing" over the age of 3.
6
* The rules for carrying children are specific to
each country. Refer to the legislation in force
in your country.
155
Child safety
Child seat at the rear
"Rearward facing"
"Forward facing"
Centre rear seat
When a "rearward facing" child seat is installed
on a rear passenger seat, move the vehicle's
front seat forwards and straighten the backrest
so that the "rearward facing" child seat does
not touch the vehicle's front seat.
When a "forward facing" child seat is installed
on a rear passenger seat, move the vehicle's
front seat forwards and straighten the backrest
so that the legs of the child in the "forward
facing" child seat do not touch the vehicle's
front seat.
A child seat with a support leg must never be
installed on the centre rear passenger seat.
Ensure that the seat belt is correctly
tensioned.
For child seats with a support leg,
ensure that this is in firm contact with
the floor. If necessary, adjust the front
seat of the vehicle.
156
Child safety
Child seat in the front*
"Rearward facing"
"Forward facing"
When a "rearward facing" child seat is installed
on the front passenger seat, adjust the seat
to the fully back and highest position, with the
backrest straightened.
The passenger airbag must be deactivated.
Otherwise, the child would risk being
seriously injured or killed if the airbag were
to inflate.
When a "forward facing" child seat is installed
on the front passenger seat, adjust the
vehicle's seat to the fully back and highest
position with seat backrest straightened and
leave the passenger's airbag activated.
*
Passenger seat in the fully back and
highest position.
6
Ensure that the seat belt is correctly
tensioned.
For child seats with a support leg, ensure
that the support leg is in firm and stable
contact with the floor. If necessary, adjust
the the passenger seat.
Refer to the legislation in force in your
country before carrying your child in this
seating position.
157
Child safety
Deactivating the passenger's front airbag
Never install a rearward facing child
restraint system on a seat protected by
an active front airbag. This could cause
the death of the child or serious injury.
The warning label present on both sides of the
passenger's sun visor repeats this advice. In
line with current legislation, the following tables
contain this warning in all of the languages
required.
Passenger airbag OFF
For information on deactivating the
passenger's front airbag, refer to the
"Airbags" section.
158
Child safety
AR
BG
НИКОГА НЕ инсталирайте детско столче на седалка с АКТИВИРАНА предна ВЪЗДУШНА ВЪЗГЛАВНИЦА. Това може да причини
СМЪРТ или СЕРИОЗНО НАРАНЯВАНЕ на детето.
CS
NIKDY neumisťujte dětské zádržné zařízení orientované směrem dozadu na sedadlo chráněné AKTIVOVANÝM čelním AIRBAGEM. Hrozí
nebezpečí SMRTI DÍTĚTE nebo VÁŽNÉHO ZRANĚNÍ.
DA
Brug ALDRIG en bagudvendt barnestol på et sæde, der er beskyttet af en AKTIV AIRBAG. BARNET risikerer at blive ALVORLIGT
KVÆSTET eller DRÆBT.
DE
Montieren Sie auf einem Sitz mit AKTIVIERTEM Front-Airbag NIEMALS einen Kindersitz oder eine Babyschale entgegen der
Fahrtrichtung, das Kind könnte schwere oder sogar tödliche Verletzungen erleiden.
EL
Μη χρησιμοποιείτε ΠΟΤΕ παιδικό κάθισμα με την πλάτη του προς το εμπρός μέρος του αυτοκινήτου, σε μια θέση που προστατεύεται από
ΜΕΤΩΠΙΚΟ αερόσακο που είναι ΕΝΕΡΓΟΣ. Αυτό μπορεί να έχει σαν συνέπεια το ΘΑΝΑΤΟ ή το ΣΟΒΑΡΟ ΤΡΑΥΜΑΤΙΣΜΟ του ΠΑΙΔΙΟΥ
EN
NEVER use a rearward facing child restraint on a seat protected by an ACTIVE AIRBAG in front of it, DEATH or SERIOUS INJURY to the
CHILD can occur
ES
NO INSTALAR NUNCA un sistema de retención para niños de espaldas al sentido de la marcha en un asiento protegido mediante un
AIRBAG frontal ACTIVADO, ya que podría causar lesiones GRAVES o incluso la MUERTE del niño.
ET
Ärge MITTE KUNAGI paigaldage "seljaga sõidusuunas" lapseistet juhi kõrvalistmele, mille ESITURVAPADI on AKTIVEERITUD.
Turvapadja avanemine võib last TÕSISELT või ELUOHTLIKULT vigastada.
FI
ÄLÄ KOSKAAN aseta lapsen turvaistuinta selkä ajosuuntaan istuimelle, jonka edessä suojana on käyttöön aktivoitu TURVATYYNY. Sen
laukeaminen voi aiheuttaa LAPSEN KUOLEMAN tai VAKAVAN LOUKKAANTUMISEN.
FR
NE JAMAIS installer de système de retenue pour enfants faisant face vers l’arrière sur un siège protégé par un COUSSIN GONFLABLE
frontal ACTIVÉ.
Cela peut provoquer la MORT de l’ENFANT ou le BLESSER GRAVEMENT
HR
NIKADA ne postavljati dječju sjedalicu leđima u smjeru vožnje na sjedalo zaštićeno UKLJUČENIM prednjim ZRAČNIM JASTUKOM. To bi
moglo uzrokovati SMRT ili TEŠKU OZLJEDU djeteta.
HU
SOHA ne használjon menetiránynak háttal beszerelt gyermekülést AKTIVÁLT (BEKAPCSOLT) FRONTLÉGZSÁKKAL védett ülésen. Ez a
gyermek HALÁLÁT vagy SÚLYOS SÉRÜLÉSÉT okozhatja.
IT
NON installare MAI seggiolini per bambini posizionati in senso contrario a quello di marcia su un sedile protetto da un AIRBAG frontale
ATTIVATO. Ciò potrebbe provocare la MORTE o FERITE GRAVI al bambino.
6
159
Child safety
160
LT
NIEKADA neįrenkite vaiko prilaikymo priemonės su atgal atgręžtu vaiku ant sėdynės, kuri saugoma VEIKIANČIOS priekinės ORO
PAGALVĖS. Išsiskleidus oro pagalvei vaikas gali būti MIRTINAI arba SUNKIAI TRAUMUOTAS.
LV
NEKAD NEuzstādiet uz aizmuguri vērstu bērnu sēdeklīti priekšējā pasažiera sēdvietā, kurā ir AKTIVIZĒTS priekšējais DROŠĪBAS GAISA
SPILVENS.
Tas var izraisīt BĒRNA NĀVI vai radīt NOPIETNUS IEVAINOJUMUS.
MT
Qatt m’ghandek thalli tifel/tifla marbut f’siggu dahru lejn l-Airbag attiva, ghaliex tista’ tikkawza korriment serju jew anke mewt lit-tifel/tifla
NL
Plaats NOOIT een kinderzitje met de rug in de rijrichting op een zitplaats waarvan de AIRBAG is INGESCHAKELD. Bij het afgaan van de
airbag kan het KIND LEVENSGEVAARLIJK GEWOND RAKEN
NO
Installer ALDRI et barnesete med ryggen mot kjøreretningen i et sete som er beskyttet med en frontal AKTIVERT KOLLISJONSPUTE,
BARNET risikerer å bli DREPT eller HARDT SKADET.
PL
NIGDY nie instalować fotelika dziecięcego w pozycji "tyłem do kierunku jazdy" na siedzeniu wyposażonym w CZOŁOWĄ PODUSZKĘ
POWIETRZNĄ w stanie AKTYWNYM. Może to doprowadzić do ŚMIERCI DZIECKA lub spowodować u niego POWAŻNE OBRAŻENIA
CIAŁA.
PT
NUNCA instale um sistema de retenção para crianças de costas para a estrada num banco protegido por um AIRBAG frontal ACTIVADO.
Esta instalação poderá provocar FERIMENTOS GRAVES ou a MORTE da CRIANÇA.
RO
Nu instalati NICIODATA un sistem de retinere pentru copii, dispus cu spatele in directia de mers, pe un loc din vehicul protejat cu AIRBAG
frontal ACTIVAT. Aceasta ar putea provoca MOARTEA COPILULUI sau RANIREA lui GRAVA.
RU
ВО ВСЕХ СЛУЧАЯХ ЗАПРЕЩАЕТСЯ использовать обращенное назад детское удерживающее устройство на сиденье,
защищенном ФУНКЦИОНИРУЮЩЕЙ ПОДУШКОЙ БЕЗОПАСНОСТИ, установленной перед этим сиденьем.
Это может привести к ГИБЕЛИ РЕБЕНКА или НАНЕСЕНИЮ ЕМУ СЕРЬЕЗНЫХ ТЕЛЕСНЫХ ПОВРЕЖДЕНИЙ
SK
NIKDY neinštalujte detské zádržné zariadenie orientované smerom dozadu na sedadlo chránené AKTIVOVANÝM čelným AIRBAGOM.
Mohlo by dôjsť k SMRTEĽNÉMU alebo VÁŽNEMU PORANENIU DIEŤAŤA.
SL
NIKOLI ne nameščajte otroškega sedeža s hrbtom v smeri vožnje, če je VARNOSTNA BLAZINA pred sprednjim sopotnikovim sedežem
AKTIVIRANA. Takšna namestitev lahko povzroči SMRT OTROKA ali HUDE POŠKODBE.
SR
NIKADA ne koristite dečje sedište koje se okreće unazad na sedištu zaštićenim AKTIVNIM VAZDUŠNIM JASTUKOM ispred njega, jer
mogu nastupiti SMRT ili OZBILJNA POVREDA DETETA.
SV
Passagerarkrockkudden fram MÅSTE vara avaktiverad om en bakåtvänd bilbarnstol installeras på denna plats. Annars riskerar barnet att
DÖDAS eller SKADAS ALLVARLIGT.
TR
KESİNLKLE HAVA YASTIĞI AKTİF olan ön koltuğa yüzü arkaya dönük bir çocuk koltuğu yerleştirmeyiniz. Bu ÇOCUĞUN ÖLMESİNE veya
ÇOK AĞIR YARALANMASINA sebep olabilir.
Child safety
Child seats recommended by PEUGEOT
PEUGEOT offers a range of recommended child seats which are secured using a three point seat belt.
Group 0+: from birth to 13 kg
Group 1: from 9 to 18 kg
L1
"RÖMER/BRITAX Baby-Safe Plus".
Installed in the rearward-facing position.
L2
"RÖMER Duo Plus ISOFIX".
6
Groups 2 and 3: from 15 to 36 kg
L5
"KLIPPAN Optima".
From the age of approximately 6 years
(22 kg), the booster is used on its own.
L6
"RÖMER KIDFIX"
Can be secured using the vehicle's ISOFIX
mountings. The child is restrained by the
seat belt.
161
Child safety
Installing child seats attached using the seat belt
In accordance with European regulations, this table indicates the options for installing child seats secured using a seat belt and universally approved (a)
in accordance with the weight of the child and the seat in the vehicle.
Weight of the child and indicative age
Under 13 kg
(groups 0 (b) and 0+)
Up to approx 1 year
From 9 to 18 kg
(group 1)
1 to 3 years approx
From 15 to 25 kg
(group 2)
3 to 6 years approx
From 22 to 36 kg
(group 3)
6 to 10 years approx
Front passenger seat (c)
with height adjuster
U (R)
U (R)
U (R)
U (R)
Front passenger seat (c)
without height adjuster
U
U
U
U
Seat
Saloon
Outer rear seats
U
U
U
U
Centre rear seat
X
X
X
X
SW
162
Outer rear seats
U
U
U
U
Centre rear seat
X
X
X
X
Child safety
a: universal child seat, child seat that can be installed in all vehicles using a seat belt.
b: group 0, from birth to 10 kg. Shells seats and baby carriers cannot be installed in the front passenger seat. When installed in the 2nd row, they may
prevent the use of the other seats.
c: consult the legislation in force in your country before installing your child on this seat.
U: seat suitable for the installation of a child seat secured using a seat belt and universally approved, "rearward facing" and/or "forward facing".
U (R): idem U, with the vehicle's seat adjusted to the highest position and as far back as possible.
X: seat position not suitable for installation of a child seat for the weight class indicated.
Remove and stow the head restraint before installing a child seat with a backrest on a passenger seat. Refit the head restraint once the child
seat has been removed.
6
163
Child safety
"ISOFIX" mountings
Your vehicle has been approved in accordance
with the latest ISOFIX regulation s.
The seats, represented below, are fitted with
regulation ISOFIX mountings.
There are three rings for each seat.
-Two rings A, located between the vehicle
seat back and cushion, indicated by a
label.
-
A ring B, behind the seat, referred to as the
TOP TETHER for fixing the upper strap.
The TOP TETHER is used to secure the upper
strap of child seats that have one.
This arrangement reduces forward tipping of
the child seat in the event of a front impact.
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
The ISOFIX child seats are fitted with two
latches which are easily secured on the two
rings A.
Some also have an upper strap which is
attached to ring B.
To attach this strap, raise the vehicle seat's
head restraint then pass the hook between its
rods. Then fix the hook on ring B and tighten
the upper strap.
!
Saloon
The incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.
Follow strictly the instructions for
fitting child seats contained in their
manufacturer's installation guide.
For information regarding the ISOFIX child
seats which can be installed in your vehicle,
refer to the table showing the locations for
installing ISOFIX child seats.
SW
164
Child safety
ISOFIX child seats recommended by PEUGEOT and approved
for your vehicle
"RÖMER Duo Plus ISOFIX" (size category B1)
Group 1: from 9 to 18 kg
Is installed only in the forward facing position.
Is attached to the anchorage rings A and the upper anchorage ring B,
referred to as the Top Tether, using an upper strap.
Three seat body angles: sitting, reclining, lying down.
We recommend the lying down position.
6
This seat can be used on seats not equipped with ISOFIX mountings.
In this case, it must be attached to the vehicle's seat using the three-point seat belt.
Adjust the front seat of the vehicle so that the child's feet do not touch the backrest.
Follow the instructions for fitting child seats contained in the seat manufacturer's installation guide.
165
Child safety
Baby P2C Mini and its ISOFIX base (size category: E)
Group 0+: from birth to 13 kg
Installed "rearward facing" using an ISOFIX base which is attached to the anchorage rings A.
The base has a support leg, adjustable for height, which sits on the vehicle's floor.
This seat can also be secured with a seat belt. In this case only the seat shell is used.
"Baby P2C Midi" and its ISOFIX base (size categories: D, C, A, B, B1)
Group 1: from 9 to 18 kg
Installed "rearward facing" using an ISOFIX base which is attached to the anchorage rings A.
The base has a support leg, adjustable for height, which sits on the vehicle's floor.
This child seat can also be used "forward facing".
This seat can not be secured with a seat belt.
We recommend that you use the seat in the "rearward facing" position up to the age of 3 years.
Follow the instructions for fitting child seats contained in the seat manufacturer's installation guide.
The ISOFIX BABY P2C base must be installed in a way that the ISOFIX latches 3, 4 and 5 are visible. And the support leg must have 6 holes
visible.
166
Child safety
Locations for installing ISOFIX child seats
In accordance with European Regulations, this table indicates the options for installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX
mountings.
In the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter from A to G, is indicated on the child
seat next to the ISOFIX logo.
Weight of the child / indicative age
Less than 10 kg
(group 0)
Up to approx.
6 months
Type of ISOFIX child seat
ISOFIX size category
Shell
F
Less than 10 kg
(group 0)
Less than 13 kg
(group 0+)
Up to approx. 1 year
From 9 to 18 kg (group 1)
From approx. 1 to 3 years
"rearward facing"
G
C
D
Front passenger seat
"rearward facing"
E
C
D
"forward facing"
A
B
B1
6
Not Isofix
Saloon
Outer rear seats
X
IL-SU
Centre rear seat
IL-SU
IUF
IL-SU
IL-SU
IUF
IL-SU
Not Isofix
SW
Outer rear seats
Centre rear seat
X
IL-SU
Not Isofix
167
Child safety
IUF: seat suitable for the installation of an Isofix Universal seat, "Forward facing" secured using the top belt.
IL-SU: seat suitable for the installation of an Isofix Semi-Universal seat either:
- "rearward facing" fitted with a top belt or a support leg,
- "forward facing" fitted with a support leg,
- a shell seat fitted with an upper strap or a support leg.
For advice on securing of the top belt, refer to the "Isofix mountings" section.
X: seat not suitable for the installation of a child seat or shell for the weight group indicated.
168
Child safety
Recommendations
Child seats
The incorrect installation of a child seat in a
vehicle compromises the child's protection in
the event of an accident.
Check that there is no seat belt or seat belt
buckle under the child seat as this could
destabilise it.
Remember to fasten the seat belts or the
child seat harnesses keeping the slack in
relation to the child's body to a minimum,
even for short journeys.
For the installation of a child seat using a
seat belt, ensure that this is well tensioned
on the child seat and that it is holding the
child seat firmly against the seat of your
vehicle. If your front passenger seat is
adjustable, move it forward if necessary.
At the rear seats, always leave sufficient
space between the front seat and:
- a rearward facing child seat,
- the feet of a child seated in a forward
facing child seat.
For this, move the front seat forward and if
necessary straighten its backrest.
For optimum installation of the "forward facing"
child seat, ensure that the back of the child
seat is as close as possible to the backrest of
the vehicle's seat, or in contact if possible
The head restraint must be removed before
installing a child seat with a backrest on the
passenger seat.
Ensure that the head restraint is stowed or
attached securely so that it is not thrown
around the vehicle in the event of sharp
braking.
Refit the head restraint as soon as the child
seat is removed.
Installing a booster
cushion
Children at the front
As a safety precaution, do not leave:
- one or more children alone and
unsupervised in a vehicle,
- a child or an animal in a vehicle which
is exposed to the sun, with the windows
closed,
- the keys within reach of children inside
the vehicle.
To prevent accidental opening of the doors,
use the "Child lock".
Take care not to open the rear windows by
more than one third.
To protect young children from the rays of
the sun, fit side blinds on the rear windows.
The legislation on carrying a child on the
front passenger seat is specific to each
country. Refer to the legislation in force in
the country in which you are driving.
Deactivate the passenger's front airbag
when a "rearward facing" child seat is
installed on the front passenger seat.
Otherwise, the child would risk being
seriously injured or killed if the airbag were
deployed.
The chest part of the seat belt must be
positioned on the child's shoulder without
touching the neck.
Ensure that the lap part of the seat belt
passes correctly over the child's thighs.
PEUGEOT recommends the use of a booster
seat which has a back, fitted with a seat belt
guide at shoulder level.
6
169
Child safety
Electric child lock
Remote control system to prevent opening of the rear doors using their interior controls and use of the rear electric windows.
Any other status of the indicator lamp
indicates a fault with the electric child
lock.
Have it checked by a PEUGEOT dealer
or a qualified workshop.
170
Switching on
Switching off
F With the ignition on, press this button.
The indicator lamp in the button comes on,
accompanied by a message to confirm that the
child lock is on.
This indicator lamp remains on until the child
lock is switched off.
It is still possible to open the doors from the
outside and operate the rear electric windows
from the driver's control panel.
F With the ignition on, press this button
again.
The indicator lamp in the button goes off,
accompanied by a message to confirm that the
child lock is off.
This indicator lamp remains off while the child
lock is switched off.
This system is independent and in no
circumstances does it take the place of
the central locking control.
Check the status of the child lock each
time you switch on the ignition.
Always remove the key from the ignition
when leaving the vehicle, even for a
short time.
In the event of a serious impact, the
electric child lock is switched off
automatically to permit the exit of the
rear passengers.
Safety
Direction indicators
Hazard warning lamps
Three flashes
F Lower the lighting control stalk fully when
moving to the left.
F Raise the lighting control stalk fully when
moving to the right.
If you forget to cancel the direction
indicators for more than twenty
seconds, the volume of the audible
signal will increase if the speed is
above 40 mph (60 km/h).
Move the stalk briefly upwards or downwards,
without going beyond the point of resistance;
the corresponding direction indicators will flash
3 times.
This function can be used at any speed,
but it is particularly useful for changing
lane on fast roads.
Press the button, the direction indicators flash.
They can operate with the ignition off.
Automatic operation of
hazard warning lamps
7
When braking in an emergency, depending on
the rate of deceleration, as well as when the
ABS regulation is invoked or in the event of an
impact, the hazard warning lamps come on
automatically.
They switch off automatically the first time you
accelerate.
F You can also switch them off by pressing
the button.
171
Safety
Emergency or
assistance call
Horn
Audible warning system to alert other road
users to an imminent danger.
This system allows you to make an emergency
or assistance call to the emergency services or
to the dedicated PEUGEOT service.
F Press the central part of the multifunction
steering wheel.
For more information on the use of this
function, refer to the "Audio equipment
and telematics" section.
172
Use the horn moderately and only in the
following circumstances:
- immediate danger,
- overtaking a cyclist or pedestrian,
- approaching a location lacking
visibility.
Safety
Warning triangle
This safety device should be used in addition to
the hazard warning lamps.
Its presence in the vehicle is mandatory.
Placing the triangle in
the road
F Place the triangle behind the vehicle, as
required by the legislation in force in your
country.
The location for stowing a folded
triangle is in the inner trim panel of the
boot lid.
Before leaving your vehicle to set up
and install the triangle, switch on the
hazard warning lamps and put on your
high visibility vest.
Refer to the manufacturer's instructions
on unfolding and installing supplied with
the triangle.
Saloon
F Press the lug 1 and pull the assembly
towards you.
The triangle is available as an
accessory; contact a PEUGEOT dealer
or a qualified workshop.
7
SW
The dimensions of the triangle (once folded) or
its storage box must be:
- A: length = 438 mm,
- B: height = 56 mm,
- C: width = 38 mm.
FTurn the knob 2 to remove the cover.
F Hold the cover and the triangle so that they
do not fall.
173
Safety
Tyre under-inflation detection
System which automatically checks the pressures of the tyres while driving.
The system continuously monitors the pressures of the four tyres, as soon as the vehicle is moving.
A pressure sensor is located in the valve of
each tyre (except the spare wheel).
The system triggers an alert if a drop in
pressure is detected in one or more tyres.
The tyre under-inflation detection
system is an aid to driving which does
not replace the need for the driver to be
vigilant or to drive responsibly.
174
This system does not avoid the need
to check the tyre pressures regularly
(including the spare wheel) and before
a long journey.
Driving with under-inflated tyres
adversely affects road holding,
extends braking distances and causes
premature tyre wear, particularly under
arduous conditions (vehicle loaded,
high speed, long journey).
Driving with under-inflated tyres
increases fuel consumption.
The tyre pressures for your vehicle can
be found on the tyre pressure label
(see the "Identification markings"
section).
The tyre pressures must be checked
when the tyres cold (vehicle stopped
for 1 hour or after driving for less then
6 miles (10 km) at moderate speed).
Otherwise, add 0.3 bar to the values
indicated on the label.
Safety
Under-inflation alert
The alert is given by the fixed illumination
of this warning lamp, accompanied by
an audible signal, and depending on
equipment, the display of a message.
In the event of a problem on one of the tyres,
the symbol or the message appears, according
to equipment, to identify it.
F Reduce speed, avoid sudden steering
movements or harsh brake applications.
F Stop as soon as it is safe to do so.
F If you have a compressor (the one in the
temporary puncture repair kit for example),
check the four tyre pressures when cold.
If it is not possible to check the tyre
pressures at the time, drive carefully at
reduced speed.
or
F In the event of a puncture, use the
temporary puncture repair kit or the spare
wheel (according to equipment).
Operating fault
The loss of pressure detected does not
always lead to visible deformation of the
tyre. Do not rely on just a visual check.
The alert is maintained until the tyre or
tyres concerned is reinflated, repaired
or replaced.
The spare wheel (space-saver type or a
steel rim) does not have a sensor.
The flashing and then fixed
illumination of the under-inflation
warning lamp accompanied by the
illumination of the "service" warning
lamp indicates a fault with the system.
In this case, monitoring of the tyre pressures is
not assured.
This alert is also displayed when one or more
wheels is not fitted with a sensor (for example,
a space-saver or steel spare wheel).
Go to a PEUGEOT dealer or a qualified
workshop to have the system checked
or, following the repair of a puncture, to
have the original wheel, equipped with a
sensor, refitted.
7
Any tyre repair or replacement on a
wheel fitted with this system must be
carried out by a PEUGEOT dealer or a
qualified workshop.
If after changing a tyre, a wheel is not
detected by your vehicle (fitting snow
tyres for example), you must have the
system reinitialised by a PEUGEOT
dealer or a qualified workshop.
175
Safety
Electronic stability control (ESC)
Electronic Stability Control (ESC) incorporating
the following systems:
- the anti-lock braking system (ABS) and the
electronic brake force distribution (EBFD),
- the emergency braking assistance,
- the anti-slip regulation (ASR) or traction
control,
- the dynamic stability control (DSC).
176
Definitions
Anti-lock braking system (ABS)
and electronic brake force
distribution (EBFD)
This system improves the stability and
manoeuvrability of your vehicle when braking
and provides improved control in corners, in
particular on poor or slippery road surfaces.
The ABS prevents wheel lock in the event of
emergency braking.
The electronic brake force distribution system
manages the braking pressure wheel by wheel.
Anti-slip regulation (ASR)
The ASR system (also known as Traction
Control) optimises traction in order to limit
wheel slip by acting on the brakes of the driving
wheels and on the engine. It also improves
the directional stability of the vehicle on
acceleration.
Emergency braking assistance
Dynamic stability control (DSC)
In an emergency, this system enables you to
reach the optimum braking pressure more
quickly and therefore reduce the stopping
distance.
It is triggered according to the speed at which
the brake pedal is pressed. This is felt by a
reduction in the resistance of the pedal and an
increase in the effectiveness of the braking.
If there is a difference between the path
followed by the vehicle and that required by
the driver, the DSC monitors each wheel and
automatically acts on the brake of one or more
wheels and on the engine to return the vehicle
to the required path, within the limits of the laws
of physics.
Safety
Snow driving assistance
(Intelligent Traction Control)
Your vehicle has a system to help driving on
snow: Intelligent Traction Control.
This automatic system continuously checks
for situations of difficult surface adhesion that
could make it difficult to move off or make
progress on deep fresh snow or compacted
snow.
In these situations, Intelligent Traction
Control limits the amount of wheel slip to
provide the best traction and trajectory control.
In extremely severe conditions (deep snow,
mud…), it can be useful to temporarily
deactivate the wheel anti-slip regulation
system to allow a degree of wheel spin and so
recover grip.
It is recommended that the system be
reactivated as soon as possible.
Snow tyres are strongly recommended on
surfaces offering low levels of adhesion.
Operation
Anti-lock braking system (ABS)
and electronic brake force
distribution (EBFD)
When this warning lamp comes on,
accompanied by an audible signal
and a message, it indicates that
there is a fault with the ABS, which
could cause loss of control of the vehicle when
braking.
When this warning lamp comes on,
coupled with the STOP warning
lamp, accompanied by an audible
signal and a message, it indicates
that there is a fault with the electronic brake
force distribution (EBFD), which could cause
loss of control of the vehicle when braking.
You must stop as soon as it is safe to do so.
In both cases, contact a PEUGEOT dealer or a
qualified workshop.
When changing wheels (tyres and rims),
make sure that these are approved for
your vehicle.
Normal operation of the ABS may make
itself felt by slight vibrations of the brake
pedal.
In emergency braking, press
very firmly without releasing the
pressure.
7
177
Safety
Anti-slip regulation (ASR)
Deactivation
Reactivation
In exceptional conditions (starting a vehicle
which is bogged down, stuck in snow, on soft
ground...), it may be advisable to deactivate the
ASR system, so that the wheels can turn freely
and regain grip.
The system is reactivated automatically each
time the ignition is switched back on or from
12 mph (20 km/h).
F Press the "ASR OFF" button again to
reactivate it manually.
Activation
This system is activated automatically each
time the vehicle is started.
It comes into operation in the event of a
problem of grip.
This is indicated by flashing of this
warning lamp in the instrument panel.
Operating fault
F Press the "ASR OFF" button.
The indicator lamp in the button
comes on and the following message
appears in the instrument panel
screen "ASR deactivated"*: the
ASR system no longer acts on the
operation of the engine.
If this warning lamp comes on,
accompanied by an audible signal
and a message in the instrument
panel screen, this indicates a fault
with the system.
Contact a PEUGEOT dealer or a qualified
workshop to have the system checked.
* Depending on version.
178
Safety
Seat belts
Front seat belts
Rear seat belts
The rear seats are each fitted with a seat belt,
three-point anchorages with inertia reel and
force limiter (except for the centre rear seat).
The front seat belts are fitted with a
pretensioning and force limiting system.
This system improves safety in the front
seats in the event of a front or side impact.
Depending on the severity of the impact, the
pretensioning system instantly tightens the seat
belts against the body of the occupants.
The pretensioning seat belts are active when
the ignition is on.
The force limiter reduces the pressure of the
seat belt on the chest of the occupant, so
improving their protection.
Fastening
F Pull the strap, then insert the tongue in the
buckle.
F Check that the seat belt is fastened
correctly by pulling the strap.
7
Unfastening
F Press the red button on the buckle.
FGuide the seat belt as it reels in.
179
Safety
Front and rear seat belt warning
lamps
On switching on the ignition, warning
lamp 1 comes on in the instrument
panel and the corresponding warning
lamp (2 to 6) comes on in red in the
passenger's seat belt and front airbag warning
lamp display if the corresponding seat belt is
not fastened or is unfastened.
Front seat belt height adjustment
FTo adjust the anchorage point, squeeze the
control and slide it until you find a notch.
Seat belt not fastened /
unfastened warning lamps
1. Front and/or rear seat belts not fastened /
unfastened warning lamp in the instrument
panel.
2. Front left seat belt warning lamp.
3. Front right seat belt warning lamp.
4. Rear right seat belt warning lamp.
5. Rear centre seat belt warning lamp.
6. Rear left seat belt warning lamp.
From approximately 12 mph
(20 km/h), the warning lamp(s) flash
for two minutes accompanied by an
audible signal. Once these two minutes
have elapsed, the warning lamp(s) remain on until
the driver or one or more passengers fasten their
seat belt.
180
Safety
The driver must ensure that passengers use
the seat belts correctly and that they are all
restrained securely before setting off.
Wherever you are seated in the vehicle,
always fasten your seat belt, even for short
journeys.
Do not interchange the seat belt buckles as
they will not fulfil their role fully.
The seat belts are fitted with an inertia reel
permitting automatic adjustment of the
length of the strap to your size. The seat belt
is stowed automatically when not in use.
Before and after use, ensure that the seat
belt is reeled in correctly.
The lower part of the strap must be
positioned as low as possible on the pelvis.
The upper part must be positioned in the
hollow of the shoulder.
The inertia reels are fitted with an automatic
locking device which comes into operation in
the event of a collision, emergency braking
or if the vehicle rolls over. You can release
the device by pulling firmly on the strap and
releasing it so that it reels in slightly.
In order to be effective, a seat belt must:
- be tightened as close to the body as
possible,
- be pulled in front of you with a smooth
movement, checking that it does
not twist,
- be used to restrain only one person,
- not bear any trace of cuts or fraying,
- not be converted or modified to avoid
affecting its performance.
In accordance with current safety
regulations, for all repairs on your vehicle,
go to a qualified workshop with the skills
and equipment needed, which a PEUGEOT
dealer is able to provide.
Have your seat belts checked regularly by a
PEUGEOT dealer or a qualified workshop,
particularly if the straps show signs of
damage.
Clean the seat belt straps with soapy
water or a textile cleaning product, sold by
PEUGEOT dealers.
After folding or moving a seat or rear bench
seat, ensure that the seat belt is positioned
and reeled in correctly.
Recommendations for children
Use a suitable child seat if the passenger is
less than 12 years old or shorter than one
and a half metres.
Never use the same seat belt to secure more
than one person.
Never allow a child to travel on your lap.
In the event of an impact
Depending on the nature and
seriousness of the impact, the
pretensioning device may be deployed
before and independently of the airbags.
Deployment of the pretensioners is
accompanied by a slight discharge of
harmless smoke and a noise, due to the
activation of the pyrotechnic cartridge
incorporated in the system.
In all cases, the airbag warning lamp comes
on.
Following an impact, have the seat belts
system checked, and if necessary replaced,
by a PEUGEOT dealer or a qualified
workshop.
7
181
Safety
Airbags
System designed to maximise the safety of the
occupants (with the exception of the rear centre
passenger) in the event of violent collisions.
The airbags supplement the action of the forcelimiting seat belts (with the exception of the
centre rear passenger).
If a collision occurs, the electronic detectors
record and analyse the front and side impacts
sustained in the impact detection zones:
- in the case of a serious impact, the airbags
are deployed instantly and contribute
towards better protection of the occupants
of the vehicle (with the exception of the
rear centre passenger); immediately after
the impact, the airbags deflate rapidly so
that they do not hinder visibility or the exit
of the occupants,
- in the case of a minor or rear impact
or in certain roll-over conditions, the
airbags will not be deployed; the seat belt
alone contributes towards ensuring your
protection in these situations.
The airbags do not operate when the
ignition is switched off.
This equipment will only deploy once.
If a second impact occurs (during the
same or a subsequent accident), the
airbag will not be deployed again.
182
Front airbags
Impact detection zones
A. Front impact zone.
B. Side impact zone.
Deployment of the airbag(s) is
accompanied by a slight emission
of smoke and a noise, due to the
activation of the pyrotechnic cartridge
incorporated in the system.
This smoke is not harmful, but sensitive
individuals may experience slight
irritation.
The noise of the detonation may result
in a slight loss of hearing for a short
time.
System which protects the driver and front
passenger in the event of a serious front impact
in order to limit the risk of injury to the head and
thorax.
The driver's airbag is fitted in the centre of the
steering wheel; the front passenger's airbag is
fitted in the dashboard above the glove box.
Deployment
The airbags are deployed, except the
passenger's front airbag if it is deactivated, in the
event of a serious front impact to all or part of the
front impact zone A, in the longitudinal centreline
of the vehicle on a horizontal plane and directed
from the front to the rear of the vehicle.
The front airbag inflates between the thorax and
head of the front occupant of the vehicle and the
steering wheel, driver's side, and the dashboard,
passenger's side to cushion their forward
movement.
Safety
To assure the safety of your child,
the passenger's front airbag must
be deactivated when you install a
"rear facing" child seat on the front
passenger seat.
Otherwise, the child would risk being
seriously injured or killed if the airbag
were deployed.
Reactivation
Deactivation
Only the passenger's front airbag can be
deactivated:
F insert the key in the passenger airbag
deactivation switch,
F turn it to the "OFF" position,
F then, remove the key keeping the switch in
the new position.
When you remove the child seat, with the
ignition off, turn the switch to the "ON"
position to reactivate the airbag and so assure
the safety of your front passenger in the event
of an impact.
With the ignition on, this warning
lamp comes on in the seat belt and
passenger's front airbag warning
lamp display for approximately one
minute, if the passenger's front
airbag is activated.
Operating fault
If this warning lamp comes on in the
instrument panel, accompanied by
an audible warning and a message in
the instrument panel screen, contact
a PEUGEOT dealer or a qualified workshop to
have the system checked. The airbags may no
longer be deployed in the event of a serious
impact.
7
According to version, this warning
lamp comes on either in the
instrument panel or in the seat belt
and passenger's front airbag warning lamp
display when the ignition is on and until the
airbag is reactivated.
183
Safety
Lateral airbags
Deployment
The curtain airbag is deployed at the same
time as the corresponding lateral airbag in the
event of a serious side impact applied to all or
part of the side impact zone B, perpendicular
to the longitudinal centreline of the vehicle on a
horizontal plane and directed from the outside
towards the inside of the vehicle.
The curtain airbag inflates between the front or
rear occupant of the vehicle and the windows.
184
System which protects the driver and front
passenger in the event of a serious side impact
in order to limit the risk of injury to the chest,
between the hip and the shoulder.
Each lateral airbag is fitted in the seat backrest
frame, door side.
Impact detection zones
Deployment
Curtain airbags
The lateral airbags are deployed unilaterally in
the event of a serious side impact applied to all
or part of the side impact zone B, perpendicular
to the longitudinal centreline of the vehicle on a
horizontal plane and directed from the outside
towards the inside of the vehicle.
The lateral airbag inflates between the hip and
shoulder of the front occupant of the vehicle
and the corresponding door trim panel.
System which protects the driver and
passengers (with the exception of the rear
centre passenger) in the event of a serious side
impact in order to limit the risk of injury to the
side of the head.
Each curtain airbag is built into the pillars and
the upper passenger compartment area.
A. Front impact zone.
B. Side impact zone.
Operating fault
If this warning lamp comes on in the
instrument panel, accompanied by an
audible signal and a message in the
instrument panel screen, contact a
PEUGEOT dealer or a qualified workshop to have
the system checked. The airbags may no longer
be deployed in the event of a serious impact.
In the event of a minor impact or bump
on the side of the vehicle or if the
vehicle rolls over, the airbag may not be
deployed.
In the event of a rear or front collision,
the curtain airbag is not deployed.
Safety
For the airbags to be fully effective, observe the following safety rules:
Sit in a normal upright position.
Wear a correctly adjusted seat belt.
Do not leave anything between the
occupants and the airbags (a child, pet,
object...). This could hamper the operation of
the airbags or injure the occupants.
After an accident or if the vehicle has been
stolen or broken into, have the airbag
systems checked.
All work on the airbag system must be
carried out by a PEUGEOT dealer or a
qualified workshop.
Even if all of the precautions mentioned
are observed, a risk of injury or of minor
burns to the head, chest or arms when an
airbag is deployed cannot be ruled out. The
bag inflates almost instantly (within a few
milliseconds) then deflates within the same
time discharging the hot gas via openings
provided for this purpose.
Front airbags
Lateral airbags
Do not drive holding the steering wheel by its
spokes or resting your hands on the centre
part of the wheel.
Passengers must not place their feet on the
dashboard.
Do not smoke as deployment of the airbags
can cause burns or the risk of injury from a
cigarette or pipe.
Never remove or pierce the steering wheel or
hit it violently.
Do not fit or attach anything to the steering
wheel or dashboard, this could cause
injuries with deployment of the airbags.
Use only approved covers on the seats,
compatible with the deployment the lateral
airbags. For information on the range of seat
covers suitable for your vehicle, you can
contact a PEUGEOT dealer.
Refer to the "Accessories" section.
Do not fix or attach anything to the seat
backs (clothing...). This could cause injury
to the chest or arms if the lateral airbag is
deployed.
Do not sit with the upper part of the body any
nearer to the door than necessary.
7
Curtain airbags
Do not fix or attach anything to the roof. This
could cause injury to the head if the curtain
airbag is deployed.
If fitted on your vehicle, do not remove the
grab handles installed on the roof, they play
a part in securing the curtain airbags.
185
Practical information
Temporary puncture repair kit
Complete system consisting of a compressor
and a sealant cartridge which permits
temporary repair of a tyre so that you can
drive to the nearest garage.
It is designed to repair most punctures which
could affect the tyre, located on the tyre tread
or shoulder.
Access to the kit
List of tools
This kit is installed in the storage box, under the
boot floor.
All of these tools are specific to your vehicle
and can vary according to equipment. Do not
use them for other purposes.
1. 12 V compressor.
Contains a sealant cartridge for the
temporary repair of a tyre and can also be
used for adjusting tyre pressures.
2. One chock* to block one of the front
wheels of the vehicle.
3. Removable towing eye.
See the "Towing the vehicle" section.
The vehicle's electric system allows the
connection of a compressor for long
enough to inflate a tyre after a puncture
repair or for inflating a small inflatable
accessory.
* Depending on destination country or equipment.
186
Practical information
Description of the kit
A. "Sealant" or "Air" position selector.
B.On "I" / off "O" switch.
C. Deflation button.
D. Pressure gauge (in bar and p.s.i.).
E. Compartment housing:
- a cable with adaptor for 12 V socket,
- various inflation adaptors for
accessories, such as balls, bicycle
tyres...
F.
G.
H.
I.
Sealant cartridge.
White pipe with cap for repair.
Black pipe for inflation.
Speed limit sticker.
i
The speed limit sticker I must be affixed
to the vehicle's steering wheel to remind
you that a wheel is in temporary use.
Do not exceed a speed of 50 mph
(80 km/h) when driving with a tyre
repaired using this type of kit.
8
187
Practical information
Repair procedure
1. Sealing
F Switch off the ignition.
FTurn the selector A to the "sealant"
position.
F Check that the switch B is in
position "O".
Avoid removing any foreign bodies
which have penetrated into the tyre.
188
FUncoil the white pipe G fully.
FUnscrew the cap from the white pipe.
F Connect the white pipe to the valve of the
tyre to be repaired.
Take care, this product is harmful
(e.g. ethylene-glycol, colophony...) if
swallowed and causes irritation to the eyes.
Keep this product out of the reach of
children.
F Connect the compressor's electric plug to
the vehicle's 12 V socket.
F Start the vehicle and leave the engine
running.
Do not start the compressor before
connecting the white pipe to the tyre
valve: the sealant product would be
expelled through the pipe.
Practical information
F Switch on the compressor by moving
the switch B to position "I" until the tyre
pressure reaches 2.0 bars.
The sealant is injected into the tyre under
pressure; do not disconnect the pipe from
the valve during this operation (risk of
splashing).
If after around 5 to 7 minutes the
pressure is not attained, this indicates
that the tyre is not repairable; contact
a PEUGEOT dealer or a qualified
workshop for assistance.
F Remove the kit and screw the cap back on
the white pipe.
Take care to avoid staining your vehicle
with traces of fluid. Keep the kit to hand.
F Drive immediately for approximately
three miles (five kilometres), at reduced
speed (between 15 and 35 mph (20 and
60 km/h)), to plug the puncture.
F Stop to check the repair and the tyre
pressure using the kit.
8
Tyre under-inflation detection
If the vehicle is fitted with tyre underinflation detection, the under-inflation
warning lamp will remain on after the
wheel has been repaired until the
system is reinitialised by a PEUGEOT
dealer or a qualified workshop.
189
Practical information
2. Inflation
FTurn the selector A to the "air"
position.
FUncoil the black pipe H fully.
F Connect the black pipe to the
valve of the wheel.
F Connect the compressor's electric plug to
the vehicle's 12 V socket.
F Start the vehicle again and leave the
engine running.
As soon as possible, go to a PEUGEOT
dealer or a qualified workshop.
You must inform the technician that you
have used this kit. After inspection, the
technician will advise you on whether
the tyre can be repaired or if it must be
replaced.
190
F Adjust the pressure using the compressor
(to inflate: switch B in position "I";
to deflate: switch B in position "O" and
press button C), in accordance with the
vehicle's tyre pressure label (located on the
left hand door aperture).
A loss of pressure indicates that the
puncture has not been fully plugged;
contact a PEUGEOT dealer or qualified
workshop for assistance.
F Remove and stow the kit.
F Drive at reduced speed (50 mph [80 km/h]
max) limiting the distance travelled to
approximately 120 miles (200 km).
Practical information
Removing the cartridge
F Stow the black pipe.
F Detach the angled base from the white pipe.
F Support the compressor vertically.
FUnscrew the cartridge from the bottom.
Beware of discharges of fluid.
The expiry date of the fluid is indicated
on the cartridge.
The sealant cartridge is designed for
single use; even if only partly used, it
must be replaced.
After use, do not discard the cartridge
into the environment, take it to an
authorised waste disposal site or a
PEUGEOT dealer.
Do not forget to obtain a new sealant
cartridge, available from PEUGEOT
dealers or from a qualified workshop.
Checking tyre pressures / inflating accessories
You can also use the compressor, without
injecting any product, to:
- check or adjust the pressure of your tyres,
- inflate other accessories (balls, bicycle
tyres...).
FTurn the selector A to the "Air"
position.
FUncoil the black pipe H fully.
F Connect the black pipe to the
valve of the wheel or accessory.
If necessary, fit one of the adaptors
supplied with the kit first.
F Connect the compressor's electrical
connector to the vehicle's 12 V socket.
F Start the vehicle and let the engine run.
F Adjust the pressure using the compressor
(to inflate: switch B in position "I";
to deflate: switch B in position "O" and
press button C), according to the vehicle's
tyre pressure label or the accessory's
pressure label.
F Remove the kit then stow it.
8
191
Practical information
Changing a wheel
Procedure for changing a faulty wheel for the spare wheel using the tools provided with the vehicle.
Access to the tools
3. "Bolt cover" tool.
For removing the bolt protectors (covers)
on alloy wheels.
4. Socket for the security bolts (located in the
glove box).
For adapting the wheelbrace to the special
"security" bolts.
5. A wheel chock for immobilising the vehicle*.
6.Towing eye.
See "Towing the vehicle".
The tools are installed in the boot under the
floor.
To gain access to them:
F open the boot,
F position the floor vertically (SW: in its
guide) for access to the tools.
List of tools
All of these tools are specific to your
vehicle and can vary according to the level
of equipment. Do not use them for other
purposes.
1.Wheelbrace.
For removing the wheel trim and removing
the wheel bolts.
2. Jack with integral handle.
For raising the vehicle.
* Depending on country of sale or equipment.
192
Practical information
Access to the spare wheel
Wheel with trim
When refitting the wheel, refit the trim
starting by placing its notch facing the
valve and press around its edge with
the palm of your hand.
The spare wheel is located in the boot under
the floor.
According to country, the spare wheel may be
steel, alloy or of the "space-saver" type.
To gain access to it, refer to the "Access to the
tools" section.
Taking out the wheel
FUnscrew the (coloured) central bolt.
F Raise the spare wheel towards you from
the rear.
FTake the wheel out of the boot.
8
Depending on your vehicle's equipment, the
spare wheel is secured either by a strap or a
central bolt. For the bolt, the procedure is given
below.
193
Practical information
Putting the wheel back in place
F Put the wheel back in its housing.
FUnscrew the (coloured) central bolt by a
few turns then put it in place in the centre
of the wheel.
FTighten fully until the central bolt clicks to
retain the wheel correctly.
194
F Put the box back in place in the centre of
the wheel and clip it.
F Put the polystyrene storage box back in
place.
Tyre under-inflation
detection
The spare wheel (space-saver or steel
rim) does not have a sensor.
The punctured wheel must be repaired
by a PEUGEOT dealer or a qualified
workshop.
Practical information
Removing a wheel
Parking the vehicle
Immobilise the vehicle where it does not
block traffic: the ground must be level,
stable and not slippery.
Apply the parking brake unless it has
been programmed to automatic mode,
switch off the ignition and block the
wheels:
- engage first gear with a manual
gearbox,
- place the lever in position R with an
electronic gearbox,
- place the lever in position P with an
automatic gearbox.
Check that the braking warning lamp
and the P warning lamp in the parking
brake control lever come on.
The occupants must get out of the
vehicle and wait where they are safe.
Never go underneath a vehicle raised
using a jack; use an axle stand.
List of operations
F Remove the bolt cover from each of
the bolts using the tool 3 (according to
equipment).
F Fit the security socket 4 on the wheelbrace 1
to slacken the security bolt (if fitted).
F Slacken the other bolts using the
wheelbrace 1 only.
F Place the foot of the jack 2 on the ground
and ensure that it is directly below the
front A or rear B jacking point provided on
the underbody, whichever is closest to the
wheel to be changed.
8
195
Practical information
Ensure that the jack is stable. If the
ground is slippery or loose, the jack
might slip or drop - Risk of injury!
Take care to position the jack only at
one of the vehicle's jacking points A or
B under the vehicle, ensuring that the
contact surface of the vehicle's jacking
point is centred on the head of the jack.
Otherwise there is a risk of damage to
the vehicle and/or that the jack might
drop - Risk of injury!
FExtend the jack 2 until its head comes into
contact with the jacking point A or B used;
the vehicle's contact surface at A or B must
engage with the central part of the head of
the jack.
196
F Raise the vehicle until there is sufficient
space between the wheel and the ground
to admit the spare (not punctured) wheel
easily.
F Remove the bolts and store them in a clean
place.
F Remove the wheel.
Practical information
Fitting a wheel
Fitting the "space-saver"
spare wheel
If your vehicle is fitted with alloy wheels,
when tightening the bolts on fitting, it
is normal to notice that the washers
do not come into contact with the
"space-saver" spare wheel. The wheel
is secured by the conical surface of
each bolt.
After changing a wheel
List of operations
To store the punctured wheel in the
boot correctly, first remove the central
cover.
When using the "space-saver" type
spare wheel, do not exceed 50 mph
(80 km/h).
Have the tightening of the bolts and the
pressure of the spare wheel checked
by a PEUGEOT dealer or a qualified
workshop without delay.
Have the punctured wheel repaired
and refitted to the vehicle as soon as
possible.
F Put the wheel in place on the hub.
F Screw in the bolts fully by hand.
F Pre-tighten the security bolt using the
wheelbrace 1 fitted with the security
socket 4.
F Pre-tighten the other bolts using the
wheelbrace 1 only.
8
197
Practical information
F Lower the vehicle fully.
F Fold the jack 2 and detach it.
198
FTighten the security bolt using the
wheelbrace 1 fitted with the security
socket 4.
FTighten the other bolts using the
wheelbrace 1 only.
F Refit the bolt covers on each of the bolts
(according to equipment).
F Store the tools in the box.
Practical information
Snow chains
In wintry conditions, snow chains improve traction as well as the behaviour of the vehicle when braking.
The snow chains must be fitted only
to the front wheels. They must never
be fitted to "space-saver" type spare
wheels.
Take account of the legislation in force in your
country on the use of snow chains and the
maximum running speed authorised.
Use only the chains designed to be fitted to the
type of wheel fitted to your vehicle:
It is strongly recommended that before
you leave, you practise fitting the snow
chains on a level and dry surface.
Original tyre size
Chain specification
215/60R16
215/55R17
225/55 R17
Maximum link size:
9 mm
135/80R18
235/45R18
245/45R18
235/40R19
Cannot be fitted
with chains
For more information on snow chains,
contact a PEUGEOT dealer or a
qualified workshop.
Advice on installation
F If you have to fit the chains during a
journey, stop the vehicle on a flat surface
on the side of the road.
F Apply the parking brake and position any
wheel chocks to prevent movement of your
vehicle.
F Fit the chains following the instructions
provided by the manufacturer.
F Move off gently and drive for a few
moments, without exceeding 30 mph
(50 km/h).
F Stop your vehicle and check that the snow
chains are correctly tightened.
Avoid driving with snow chains on roads
that have been cleared of snow, to
avoid damaging your vehicle's tyres and
the road surface. If your vehicle is fitted
with alloy wheels, check that no part of
the chain or its fixings is in contact with
the wheel rim.
8
199
Practical information
Changing a bulb
Front lamps
Model with "full LED" technology
headlamps
1.
2.
3.
4.
5.
6.
Additional lighting.
Dipped beam headlamps.
Main beam headlamps.
Daytime running lamps.
Direction indicators / Sidelamps.
Front foglamps.
All of these lamps use light-emitting
diodes - LEDs.
200
For the replacement of these lightemitting diode (LED) lamps, contact
a PEUGEOT dealer or a qualified
workshop.
In some weather conditions (e.g. low
temperature or humidity), the presence
of misting on the internal surface of the
glass of the headlamps and rear lamps
is normal; it disappears after the lamps
have been on for a few minutes.
Model with halogen headlamps
1.
2.
3.
4.
5.
Dipped beam headlamps (H7-55W).
Main beam headlamps (H7-55W).
Daytime running lamps (LEDs).
Direction indicators / Sidelamps (LEDs).
Foglamps (LEDs).
For H7 type bulbs with lugs, take care to
observe their correct installation so as to
ensure the best lighting performance.
Practical information
The headlamps are fitted with
polycarbonate glass with a protective
coating:
F do not clean them using a dry
or abrasive cloth, nor with a
detergent or solvent product,
F use a sponge and soapy water or a
pH neutral product,
F when using a high pressure washer
on persistent marks, do not keep
the lance directed towards the
lamps or their edges for too long,
so as not to damage their protective
coating and seals.
RHX internal combustion model
(lower part)
1. Daytime running lamps / sidelamps
(LEDs).
2. Direction indicators (LEDs).
Changing a bulb should only be done
after the headlamp has been switched
off for several minutes (risk of serious
burns).
F Do not touch the bulb directly with
your fingers, use a lint-free cloth.
It is imperative to use only antiultraviolet (UV) type bulbs to avoid
damaging the headlamp.
Always replace a failed bulb with a
new bulb with the same type and
specification.
8
201
Practical information
Halogen model
Main beam headlamps
F Remove the protective plastic cover by
pulling on the tab.
FUnclip the bulb connector.
FExtract the bulb by pulling and change it.
F Remove the protective plastic cover by
pulling on the tab.
FUnclip the bulb connector.
F Remove the bulb by pulling it out and
change it.
For reassembly, carry out these operations in
reverse order.
For the left hand headlamp, it is
necessary to remove the battery.
Refer to the corresponding section.
202
Door mirror spotlamps
Dipped beam headlamp
For reassembly, carry out these operations in
reverse order.
You should contact a PEUGEOT dealer or a
qualified workshop for the replacement of the
light emitting diode - LED.
Integrated direction indicator
side repeaters
You should contact a PEUGEOT dealer or a
qualified workshop for the replacement of these
bulbs.
Practical information
Rear lamps (Saloon)
1.
2.
3.
4.
Brake lamps
(light emitting diodes - LEDs).
Sidelamps
(light emitting diodes - LEDs).
Direction indicators
(PY21W amber).
Foglamps
(light-emitting diodes) /
Reversing lamps (W16W).
Light emitting diodes-LEDs
For replacement, contact a PEUGEOT
dealer or qualified workshop.
Direction indicators and reversing lamp
Direction indicators
Reversing lamp
F Open the boot, then the plastic cover.
F Remove the two lamp unit fixing nuts.
FExtract the lamp unit carefully from the
outside.
F Disconnect the electrical connector.
F Spread the tabs and remove the bulb
holder.
FTurn the bulb a quarter of a turn and pull it
out.
-
For reassembly, carry out these operations in
reverse order.
To reassemble, carry out these operations in
reverse order.
Remove the direction indicator bulb holder,
as described above.
-Turn the bulb a quarter of a turn and
change it.
8
203
Practical information
Rear lamps (SW)
1. Brake lamps (light emitting
diodes - LEDs).
2. Reversing lamps (W19W).
3. Direction indicators (PY21W amber).
4. Sidelamps (light emitting
diodes - LEDs).
5. Foglamps (light emitting diodes - LEDs).
Light emitting diodes-LEDs
For replacement, contact a PEUGEOT
dealer or qualified workshop.
204
Direction indicators
(on the wings)
F Open the boot then remove the access
cover.
F Remove the sealing foam.
F Disconnect the lamp connector.
F Remove the lamp fixing nut.
F Carefully remove the lamp unit from
outside.
F Remove the sealing foam.
FUnclip the bulb holder.
FTurn the bulb a quarter of a turn and pull
it out.
For reassembly, carry out these operations in
reverse order.
Practical information
Reversing lamp (tailgate)
F Open the tailgate and then remove the
access cover.
F Disconnect the lamp connector.
F Remove the lamp fixing nut.
F Carefully remove the lamp from the
outside.
F Remove the sealing foam.
FTurn the bulb holder a quarter of a turn and
pull it out.
For reassembly, carry out these operations in
reverse order.
8
205
Practical information
Third brake lamp (light emitting
diodes - LEDs)
Contact a PEUGEOT dealer or qualified
workshop.
206
Number plate lamps
F Insert a thin screwdriver into one of the
outer holes of the lens.
F Push it outwards to unclip.
F Disconnect the lamp connector.
F Remove the lens.
F Pull the bulb out and change it.
Practical information
Changing a fuse
Procedure for replacing a failed fuse with a new fuse to rectify a failure of the corresponding function.
Access to the tools
Changing a fuse
Installing electrical
accessories
Good
The extraction tweezer and spare fuses are
located in the glove box.
Failed
Before changing a fuse, the cause of the failure
must be identified and rectified.
F Identify the failed fuse by checking the
condition of its filament.
FUse the special tweezer to extract the fuse
from its housing.
F Always replace the faulty fuse with a fuse
of the same rating.
F Check that the number marked on the
fusebox, the rating marked on the fuse and
the following tables all agree.
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories on your
vehicle, contact a PEUGEOT dealer or
a qualified workshop.
PEUGEOT will not accept responsibility
for the cost incurred in repairing your
vehicle or for rectifying malfunctions
resulting from the installation of
accessories not supplied and not
recommended by PEUGEOT and
not installed in accordance with its
instructions, in particular when the
combined consumption of all of the
additional equipment connected
exceeds 10 milliamperes.
8
207
Practical information
Dashboard fuses
The fusebox is placed in the lower dashboard
(left-hand side).
Access to the fuses
F Open the hinged panel, then apply light
force to bypass the stops.
208
Fuse
N°
Rating
(A)
F6 A or B
15
Audio system.
F8
3
Alarm.
F13
10
Front cigar lighter.
F14
10
Front 12 V socket.
F16
3
Rear courtesy lamp, rear map reading lamps.
F17
3
Front courtesy lamp, courtesy mirror.
F28 A or B
15
Audio system.
F30
20
Rear wiper.
F32
10
Audio amplifier.
Functions
Practical information
Fuses behind the glove box
Fuse
N°
Rating
(A)
F3
15
Driver's electric window panel, 12 V socket for rear seats.
F4
15
12 V socket in boot.
F5
30
One-touch rear window.
F6
30
One-touch front window.
F11
20
Trailer unit.
F12
20
Audio amplifier.
F15
20
Panoramic sunroof blind (SW).
F16
5
Driver's electric window switch panel.
Functions
8
209
Practical information
Engine compartment fuses
The fusebox is placed in the engine
compartment near the battery.
Access to the fuses
FUnclip the cover.
F Change the fuse (see corresponding
paragraph).
F When you have finished, close the cover
carefully to ensure correct sealing of the
fusebox.
210
Fuse
N°
Rating
(A)
F20
15
Front / rear screenwash pump.
F21
20
Headlamp wash pump.
F22
15
Horn.
F23
15
Right-hand main beam headlamp.
F24
15
Left-hand main beam headlamp.
F27
5
Left hand lamp mask.
F28
5
Right hand lamp mask.
Functions
Practical information
12 V battery
Procedure for starting the engine using another battery or charging a discharged battery.
Access to the battery
Before doing any work
The presence of this label, in particular
with the Stop & Start system, indicates
the use of a 12 V lead-acid battery with
special technology and specification;
the involvement of a PEUGEOT dealer
or a qualified workshop is essential
when replacing or disconnecting the
battery.
After refitting the battery, the Stop &
Start system will only be active after a
continuous period of immobilisation of the
vehicle, a period which depends on the
climatic conditions and the state of charge
of the battery (up to about 8 hours).
Immobilise the vehicle: apply the
parking brake, put the gearbox in
neutral, then switch off the ignition.
Check that all electrical equipment is
switched off.
The battery is located under the bonnet.
To gain access to it:
F open the bonnet using the interior release
lever, then the exterior safety catch,
F remove the plastic cover on the (+)
terminal,
F if necessary, unclip the fusebox to remove
the battery.
8
211
Practical information
Disconnecting the (+) cable
Starting using another
battery
When your vehicle's battery is discharged, the
engine can be started using a slave battery
(external or on another vehicle) and jump lead
cables.
F Raise the locking tab D fully to release the
cable terminal clamp E.
Reconnecting the (+) cable
F Position the open clamp E of the cable on
the positive post (+) of the battery.
F Press vertically on the clamp E to position
it correctly on the battery.
F Lock the clamp by spreading the
positioning lug and then lowering the tab D.
Do not apply excessive force on the
tab as locking will not be possible if the
clamp is not positioned correctly; start
the procedure again.
212
First check that the slave battery has a
nominal voltage of 12 V and a capacity
at least equal to that of the discharged
battery.
Do not try to start the engine by
connecting a battery charger.
Do not disconnect the (+) terminal when
the engine is running.
F Remove the plastic cover from the (+)
terminal, if your vehicle has one.
F Connect the red cable to the positive
terminal (+) of the flat battery A, then to the
positive terminal (+) of the slave battery B.
Practical information
F Operate the starter on the broken down
vehicle and let the engine run
If the engine does not start straight away,
switch off the ignition and wait a few
moments before trying again.
F Wait until the engine returns to idle then
disconnect the jump lead cables in the
reverse order.
F Refit the plastic cover to the (+) terminal,
if your vehicle has one.
F Connect one end of the green or black
cable to the negative terminal (-) of the
slave battery B (or earth point on the other
vehicle).
F Connect the other end of the green or black
cable to the earth point C on the broken
down vehicle (or on the engine mounting).
F Start the engine of the vehicle with the
good battery and leave it running for a few
minutes.
Some functions are not available if the
battery is not sufficiently charged.
Before disconnecting the battery
Wait 2 minutes after switching off the ignition
before disconnecting the battery.
Close the windows and the doors before
disconnecting the battery.
Following reconnection of the
battery
Following reconnection of the battery, switch on
the ignition and wait 1 minute before starting to
permit initialisation of the electronic systems.
However, if problems remain following this
operation, contact a PEUGEOT dealer or a
qualified workshop.
Referring to the corresponding section, you
must yourself reinitialise (depending on
version):
- the remote control key,
- the electric blind(s),
-...
8
213
Practical information
Charging the battery using
a battery charger
With Stop & Start, the battery does not
have to be disconnected for charging.
F Disconnect the battery from the vehicle.
F Follow the instructions for use provided by
the manufacturer of the charger.
F Connect the battery starting with the
negative terminal (-).
F Check that the terminals and connectors
are clean. If they are covered with sulphate
(whitish or greenish deposit), remove them
and clean them.
The batteries contain harmful
substances such as sulphuric acid
and lead. They must be disposed of in
accordance with regulations and must
not, in any circumstances, be discarded
with household waste.
Take used remote control batteries and
vehicle batteries to a special collection
point.
It is advisable to disconnect the battery
if the vehicle is to be left unused for
more than one month.
Protect your eyes and face before
handling the battery.
All operations on the battery must be
carried out in a well ventilated area and
away from naked flames and sources
of sparks, so as to avoid the risk of
explosion or fire.
Do not try to charge a frozen battery;
the battery must first be thawed out to
avoid the risk of explosion. If the battery
has been frozen, before charging have
it checked by a PEUGEOT dealer or a
qualified workshop who will check that
the internal components have not been
damaged and the casing is not cracked,
which could cause a leak of toxic and
corrosive acid.
Do not reverse the polarity and use only
a 12 V charger.
Do not disconnect the terminals while
the engine is running.
Do not charge the batteries without
disconnecting the terminals first.
Wash your hands afterwards.
Do not push the vehicle to start the
engine if you have an electronic or
automatic gearbox.
214
Practical information
Removing - refitting the battery*
This procedure allows you to safely remove the
battery when needed to change a failed bulb.
Before removal
-
You can also call on a PEUGEOT
dealer or a qualified workshop to carry
out this procedure.
-
-
-
-
Place the vehicle in a ventilated location,
with free access and preferably on a level
surface.
Apply the parking brake.
Put the gear lever into neutral (position N
for an automatic or electronic gearbox).
If the vehicle has an alarm, leave the
bonnet open to avoid triggering the alarm.
Leave at least one window open if in a
secure location, otherwise lock all the
doors and the boot.
-
-
-
-
If the vehicle has a motorised tailgate,
it will not be possible to open it after
disconnecting the battery.
Switch off the ignition and remove the key.
If the vehicle has Keyless Entry and
Starting, take the remote control at least
3 metres away from the vehicle.
Wait about 4 minutes (or 12 minutes with
an automatic or electronic gearbox) before
disconnecting the battery.
8
* Valid only for Saloon and SW.
215
Practical information
Removal
-
216
Disconnect the positive (+) terminal from
the battery.
-
Remove the battery cover 1.
-Release 2 then disconnect the negative (-)
terminal from the battery.
-Unclip the wiring harnesses 3.
-Unclip and move aside the wiring
harness 4.
- Remove the nut 5 from the positive (+)
cable.
- Move aside wiring harness 6.
Practical information
-Using a screwdriver, unclip the clips 7
and 8.
- Raise the power shut-off unit 9.
- Move this unit forward out of the way.
-Unclip the clips.
- Remove the battery cover 10.
-Using a scewdriver, lever the fixing 11
aside and remove the battery.
8
217
Practical information
Refitting
After refitting
-
If the vehicle has an electric parking
brake, check that it is working correctly by
releasing and applying it.
- Switch the ignition off.
-Get out of the vehicle then check that the
remote control works correctly.
- Set: the time, the preset radio stations and
the audio settings.
To reassemble, carry out the removal
operations in reverse order, connecting the
positive (+) terminal last.
-
-
-
-
-
-
-
218
Check that the battery terminals are
secure.
Switch on the ignition, without starting the
engine.
Check that there are no error messages or
warning lamps on. If necessary contact a
PEUGEOT dealer or a qualified workshop
to have the system reset.
Check the correct operation of all doors
and windows.
After refitting, wait around 1 minute (or
2 minutes for an automatic or electronic
gearbox).
Start the engine.
Check the correct operation of anti-pinch
systems: electric windows, opening roof,
panoramic sunroof.
After refitting the battery, some systems
may be temporarily unavailable:
Stop (Stop & Start), Air conditioning,
Navigation.
In all cases, contact a PEUGEOT dealer
or a qualified workshop if there are any
faults after refitting the battery.
Practical information
Load reduction mode
Energy economy mode
System which manages the use of certain
functions according to the level of charge
remaining in the battery.
When the vehicle is being driven, the load
reduction function temporarily deactivates
certain functions, such as the air conditioning,
the heated rear screen...
The deactivated functions are reactivated
automatically as soon as conditions permit.
System which manages the duration of use of certain functions to conserve a sufficient level of
charge in the battery.
After the engine has stopped, you can still use functions such as the audio and telematics
system, windscreen wipers, dipped beam headlamps, courtesy lamps, etc. for a maximum
combined duration of about forty minutes.
Switching to economy
mode
A message then appears in the instrument
panel screen indicating that the vehicle has
switched to economy mode and the active
functions are put on standby.
If a telephone call is being made at this time,
it will be maintained for around 10 minutes with
the Bluetooth hands-free system of your audio
system.
Exiting economy mode
These functions are reactivated automatically
next time the vehicle is driven.
In order to restore the use of these functions
immediately, start the engine and let it run:
- for less than ten minutes, to use the
equipment for approximately five minutes,
- for more than ten minutes, to use the
equipment for up to approximately
thirty minutes.
Let the engine run for the duration specified to
ensure that the battery charge is sufficient.
Do not repeatedly and continuously restart the
engine in order to charge the battery.
A flat battery prevents the engine from starting
(refer to the "Battery" section).
8
219
Practical information
Changing a wiper blade
Before removing a front
wiper blade
F Within one minute after switching off
the ignition, operate the wiper stalk to
position the wiper blades vertically on the
windscreen.
Removing
F Raise the corresponding wiper arm.
FUnclip the wiper blade and remove it.
220
Fitting
F Put the corresponding new wiper blade in
place and clip it.
F Fold down the wiper arm carefully.
After fitting a front wiper
blade
F Switch on the ignition.
F Operate the wiper stalk again to park the
wiper blades.
Practical information
Towing the vehicle
Procedure for having your vehicle towed or for towing another vehicle using a removable towing eye.
Access to the tools
Towing your vehicle
The towing eye is installed in the boot under
the floor.
To gain access to it:
F open the boot,
F position the floor vertically,
F remove the towing eye.
F On the front bumper, unclip the cover by
pressing at the bottom.
F Screw the towing eye in fully.
F Install the towing bar.
F Switch on the hazard warning lamps on the
towed vehicle.
Put the gear lever into neutral
(position N for an electronic or
automatic gearbox).
Failure to follow this instruction could
lead to damage to certain components
(brakes, transmission, ...) and the
absence of braking assistance on
restarting the engine.
8
221
Practical information
Towing another vehicle
F On the rear bumper, unclip the cover by
pressing at the bottom.
F Screw the towing eye in fully.
F Install the towing bar.
F Switch on the hazard warning lamps on the
towed vehicle.
222
General
recommendations
Observe the legislation in force in your
country.
Ensure that the weight of the towing
vehicle is higher than that of the towed
vehicle.
The driver must remain at the wheel of
the towed vehicle and must have a valid
driving licence.
When towing a vehicle with all four
wheels on the ground, always use an
approved towing arm; rope and straps
are prohibited.
The towing vehicle must move off gently.
When towing a vehicle with the engine
off, there is no longer any power
assistance for braking or steering.
In the following cases, you must always
call on a professional recovery service:
- vehicle broken down on a motorway
or fast road,
- four-wheel drive vehicle,
- when it is not possible to put the
gearbox into neutral, unlock the
steering, or release the parking
brake,
- towing with only two wheels on the
ground,
- where there is no approved towing
arm available...
Practical information
Towing a trailer
Blanking cover
Towbar suitable for the attachment of a
trailer or installation of a bicycle carrier, with
additional lighting and signalling.
Your vehicle is primarily designed for
transporting people and luggage, but it may
also be used for towing a trailer.
When towing, you must remove the blanking
cover if your vehicle has one.
Contact a PEUGEOT dealer or a qualified
workshop for this.
We recommend the use of genuine
PEUGEOT towbars and their harnesses
that have been tested and approved
from the design stage of your vehicle,
and that the fitting of the towbar is
entrusted to a PEUGEOT dealer or a
qualified workshop.
If the towbar is not fitted by a
PEUGEOT dealer, it is imperative that it
is fitted in accordance with the vehicle
manufacturer's instructions.
Driving with a trailer places greater
demands on the towing vehicle and the
driver must take particular care.
8
223
Practical information
Driving advice
Distribution of loads
Cooling
Braking
F Distribute the load in the trailer so that the
heaviest items are as close as possible to
the axle and the nose weight approaches the
maximum permitted without exceeding it.
Air density decreases with altitude, thus
reducing engine performance. Above
1 000 metres, the maximum towed load must
be reduced by 10 % for every 1 000 metres of
altitude.
Towing a trailer on a slope increases the
temperature of the coolant.
As the fan is electrically controlled, its cooling
capacity is not dependent on the engine speed.
FTo lower the engine speed, reduce your
speed.
The maximum towed load on a long incline
depends on the gradient and the ambient
temperature.
In all cases, keep a check on the coolant
temperature.
Towing a trailer increases the braking distance.
To avoid overheating of the brakes on a long
mountain type of descent, the use of engine
braking is recommended.
Refer to the "Technical data" section for details
of the weights and towed loads which apply to
your vehicle.
Side wind
F If the warning lamp and the
STOP warning lamp come on,
stop the vehicle and switch off
the engine as soon as possible.
Tyres
F Check the tyre pressures of the towing
vehicle and of the trailer, observing the
recommended pressures.
Lighting
F Check the electrical lighting and signalling
on the trailer.
FTake into account the increased sensitivity
to side wind.
The rear parking sensors will be
deactivated automatically if a genuine
PEUGEOT towbar is used.
224
Practical information
Fitting roof bars
When fitting transverse roof bars, take care to
position them correctly:
-
Saloon: there are retaining pins in the door
apertures.
Maximum authorised weight on the roof
bars, for a loading height not exceeding
40 cm (with the exception of bicycle
carriers):
-Saloon: 70 kg
-SW: 100 kg
If the height exceeds 40 cm, adapt the
speed of the vehicle to the profile of the
road to avoid damaging the roof bars
and the fixings on the roof.
Be sure to refer to national legislation in
order to comply with the regulations for
transporting objects which are longer
than the vehicle.
-
SW: there are markings on each of the
longitudinal bars.
8
Use accessories recommended
by PEUGEOT observing the
manufacturer's recommendations and
fitting instructions so as to avoid the
risk of damaging the body (deformation,
scratches, ...).
225
Practical information
Very cold climate screen
Removable protective screen which prevents the accumulation of snow at the radiator cooling fan.
Before fitting or removing the screen,
ensure that the engine is off and
the cooling fan has stopped. It is
recommended that the screen be fitted
and removed by a PEUGEOT dealer or
a qualified workshop.
Fitting
Removal
F Offer up the screen to the front of the top
section of the front bumper upper grille.
F Press on the screen to engage its fixing
clips.
FUse a screwdriver as a lever to unclip each
retaining clip in turn.
Do not forget to remove the very cold
climate screen:
- when the ambient temperature exceeds
10° C (for example: in summer, ...),
- when towing,
- at speeds above 75 mph (120 km/h).
226
Practical information
Accessories
A wide range of accessories and genuine parts is available from the PEUGEOT dealer network.
These accessories and parts have been tested and approved for reliability and safety.
They are all suitable for your vehicle and benefit from PEUGEOT's recommendation and warranty.
"Comfort":
"Style":
"Protection":
cool box, smoker's kit, 230 V socket, torch...
spoiler, front and rear mud flaps, aluminium
gear lever knob, alloy wheels (16, 17, 18 and
19 inch), body kit, door mirror shells, door air
deflectors, ...
mats*, seat covers, vehicle covers, sun blinds,
boot net, load protection net, dog guard, door
and boot sill protectors, resin side rubbing
strips...
"Transport solutions":
"Safety and security":
booster seats and child seats, boot tray, roof
box, ski carrier, towbar-mounted bicycle carrier,
towbars (swan-neck, quickly detachable ball,
folding), harnesses, sliding floor, utility vehicle
conversion kit, ...
The trailer towbar and its harness should
preferably be fitted by a PEUGEOT dealer.
speed limiter/cruise control, anti-theft alarm,
microwave unit, window etching, wheel security
bolts, breathalyser, first aid kit, warning
triangle, high visibility vest, stolen vehicle
tracking system, winter equipment (17 inch
wheels for snow chains), reversing camera,
front and rear parking sensors, boot spacers...
8
*To avoid any risk of jamming of the pedals:
- ensure that the mat is positioned and
secured correctly,
- never fit one mat on top of another.
227
Practical information
"Multimedia":
audio systems, portable navigation system,
Takara/Sony portable video screen, Bluetooth
system, speakers, DVD player, Wi-Fi, driving
aids, video support, microwave unit...
Installation of radio
communication
transmitters
Before installing any after-market radio
communication transmitter, you can
contact a PEUGEOT dealer for the
specification of transmitters which can
be fitted (frequency, maximum power,
aerial position, specific installation
requirements), in line with the Vehicle
Electromagnetic Compatibility Directive
(2004/104/EC).
228
You can also obtain products for cleaning and
maintenance (exterior and interior) and topping
up fluids (screenwash, ...), as well as refills
(cartridge for temporary tyre repair kit...) from
PEUGEOT dealers.
Depending on the legislation in force in
the country, certain safety equipment
may be compulsory: high visibility
safety vests, warning triangles,
breathalyzers, spare bulbs, spare fuses,
a fire extinguisher, a first aid kit, mud
flaps at the rear of the vehicle.
The fitting of electrical equipment
or accessories which are not
recommended by PEUGEOT may result
in a failure of your vehicle's electronic
system and excessive electrical
consumption.
Please note this precaution. You
are advised to contact a PEUGEOT
representative to be shown the range
of recommended equipment and
accessories.
Checks
PEUGEOT & TOTAL,
A partnership to deliver
better performance!
Innovation, the key to success
The TOTAL Research and Development and
PEUGEOT teams work together to develop high
quality lubricants that meet the requirements
of PEUGEOT vehicles. For you, this is the
assurance that the performance of your engine
is optimised while also ensuring its durability.
The 208 HYbrid FE demonstrates the ability of
PEUGEOT and TOTAL to develop innovative
technologies and provide other ways of moving
towards the future.
Reduced exhaust emissions,
a true reality
TOTAL lubricants are formulated to optimise the
efficiency of engines and the protection of the
emissions post-treatment systems. It is important
to observe the servicing recommendations
made by PEUGEOT to assure correct operation.
208 HYbrid FE, a technology demonstrator with exceptional characteristics: 1.9 l/100 km
(148.7 mpg) and 0 to 100 km/h (0 to 62 mph) in 8 seconds.
9
RECOMMENDS
229
Checks
Opening the bonnet
Before doing anything under the
bonnet, switch off the Stop & Start
system to avoid any risk of injury
resulting from an automatic change to
START mode.
Opening
F From inside: pull the release lever, located
on the left below the dashboard, towards
you.
F From the outside: lift the safety catch and
raise the bonnet.
A bonnet strut opens the bonnet and holds it
open.
Closing
F Lower the bonnet and release it at the end
of its travel.
F Check that it is latched correctly.
The cooling fan may start after
switching off the engine: take care
with articles and clothing that might
be caught by the fan blades.
230
Because of the presence of electrical
equipment under the bonnet, it is
recommended that exposure to water
(rain, washing, ...) be limited.
Checks
Running out of fuel (Diesel)
On vehicles fitted with HDi engines, the fuel
system must be primed if you run out of fuel;
refer to the corresponding engine compartment
view.
If the tank on your vehicle is fitted with
a misfuel prevention device, refer to the
"Misfuel prevention (Diesel)" section.
If the engine does not start first time,
don't keep trying but start the procedure
again from the beginning.
2 litre BlueHDi engine
F Fill the fuel tank with at least five litres of
Diesel.
F Switch on the ignition (without starting the
engine).
F Wait around 6 seconds and switch off the
ignition.
F Repeat the operation 10 times.
F Operate the starter to run the engine.
1.6 litre HDi engine
2 litre and 2.2 litre HDi
engines
F Fill the fuel tank with at least five litres of
diesel.
F Open the bonnet.
F If necessary, unclip the styling cover for
access to the priming pump.
F Squeeze and release the priming pump
repeatedly until resistance is felt (there
may be resistance at the first press).
F Operate the starter until the engine starts
(if the engine does not start at the first
attempt, wait around 15 seconds before
trying again).
F If the engine does not start after a few
attempts, operate the priming pump again
then start the engine.
F Clip the styling cover back in place.
F Close the bonnet.
F Fill the fuel tank with at least five litres of
Diesel.
F Open the bonnet.
F If necessary, unclip the style cover for
access to the priming pump.
F Squeeze and release the priming pump
repeatedly until fuel appears in the
transparent pipe.
F Operate the starter until the engine starts
(if the engine does not start at the first
attempt, wait around 15 seconds before
trying again).
F If the engine does not start after a few
attempts, operate the priming pump again
then start the engine.
F Put the style cover back in position and clip
it in place.
F Close the bonnet.
9
231
Checks
Petrol engines
The various caps and covers allow access for
checking the levels of the various fluids and for
replacing certain components.
1. Power steering reservoir.
2. Screenwash and headlamp wash reservoir.
3. Coolant reservoir.
4. Brake fluid reservoir.
5. Battery / Fuses.
6.Fusebox.
7. Air filter.
8.Engine oil dipstick.
9.Engine oil filler cap.
1.6 litre 16V VTi 120 hp
1.6 litre 16V THP 155 hp
232
Checks
Petrol engines
The various caps and covers allow access for
checking the levels of the various fluids and for
replacing certain components.
1. Power steering reservoir.
2. Screenwash and headlamp wash reservoir.
3. Coolant reservoir.
4. Brake fluid reservoir.
5. Battery / Fuses.
6.Fusebox.
7. Air filter.
8.Engine oil dipstick.
9.Engine oil filler cap.
1.6 litre 16V e-THP 165 hp
9
233
Checks
Diesel engines
The various caps and covers allow access for
checking the levels of the various fluids, for
replacing certain components and for priming
the fuel system.
1. Power steering reservoir.
2. Screenwash and headlamp wash reservoir.
3. Coolant reservoir.
4. Brake fluid reservoir.
5. Battery / Fuses.
6.Fusebox.
7. Air filter.
8.Engine oil dipstick.
9.Engine oil filler cap.
10. Priming pump*.
11. Bleed screw*.
* According to engine.
234
1.6 litre HDi 115 hp
2.0 litre HDi 140 hp
Checks
Diesel engines
The various caps and covers allow access for
checking the levels of the various fluids, for
replacing certain components and for priming
the fuel system.
1. Power steering reservoir.
2. Screenwash and headlamp wash reservoir.
3. Coolant reservoir.
4. Brake fluid reservoir.
5. Battery / Fuses.
6.Fusebox.
7. Air filter.
8.Engine oil dipstick.
9.Engine oil filler cap.
10. Priming pump*.
11. Bleed screw*.
2.0 litre HDi 160 hp
9
* According to engine.
2.2 litre HDi 200 hp
235
Checks
BlueHDi Diesel engines
The various caps and covers allow access for
checking the levels of the various fluids, for
replacing certain components and for priming
the fuel system.
1. Power steering reservoir.
2. Screenwash and headlamp wash reservoir.
3. Coolant header tank.
4. Brake fluid reservoir.
5. Battery / Fuses.
6.Fusebox.
7. Air filter .
8.Engine oil dipstick.
9.Engine oil filler cap.
2.0 litre Blue HDi 150 hp
2.0 litre Blue HDi 180 hp
236
Checks
Checking levels
Check all of these levels regularly, in line with the warranty and maintenance record. Top them up if necessary, unless otherwise indicated.
If a level drops significantly, have the corresponding system checked by a PEUGEOT dealer or a qualified workshop.
Take care when working under the
bonnet, as certain areas of the engine
may be extremely hot (risk of burns) and
the cooling fan could start at any time
(even with the ignition off).
Engine oil level
The check is carried out either when
the ignition is switched on using the
oil level indicator in the instrument
panel for vehicles with and electric oil
level gauge, or using the dipstick.
To ensure that the reading is correct,
your vehicle must be parked on a level
surface and the engine having been off
for more than 30 minutes.
It is normal to top up the oil level between
two services (or oil changes). PEUGEOT
recommends that you check the level, and top
up if necessary, every 3 000 miles (5 000 kms).
Checking using the dipstick
Refer to the "Petrol engine" or "Diesel engine"
section for the location of the dipstick in the
engine compartment of your vehicle.
FTake the dipstick by its coloured grip and
remove it completely.
F Wipe the end of the dipstick using a clean
non-fluffy cloth.
F Refit the dipstick and push fully down, then
pull it out again to make the visual check:
the correct level is between the marks A
and B.
If you find that the level is above the A mark or
below the B mark, do not start the engine.
- If the level is above the MAX mark (risk
of damage to the engine), contact a
PEUGEOT dealer or a qualified workshop.
- If the level is below the MIN mark, you
must top up the engine oil.
Oil grade
Before topping-up the oil or changing the oil,
check that the oil is the correct grade for your
engine and conforms to the manufacturer's
recommendations.
A = MAX
9
B = MIN
237
Checks
Brake fluid level
Topping up the engine oil level
Engine oil change
Refer to the "Petrol engine" or "Diesel engine"
section for the location of the oil filler cap in the
engine compartment of your vehicle.
FUnscrew the oil filler cap to reveal the filler
aperture.
F Add oil in small quantities, avoiding any
spills on engine components (risk of fire).
F Wait a few minutes before checking the
level again using the dipstick.
F Add more oil if necessary.
F After checking the level, carefully refit the
oil filler cap and the dipstick in its tube.
Refer to the warranty and maintenance record
for details of the interval for this operation.
In order to maintain the reliability of the engine
and emission control system, the use of
additives in the engine oil is prohibited.
After topping up the oil, the check when
switching on the ignition with the oil level
indicator in the instrument panel is not valid
during the 30 minutes after topping up.
238
The brake fluid level should be close
to the "MAX" mark. If it is not, check
the brake pad wear.
Changing the fluid
Refer to the warranty and maintenance record
for details of the interval for this operation.
Fluid specification
The brake fluid must conform to the
manufacturer's recommendations.
Power steering fluid level
The power steering fluid level should
be close to the "MAX" mark. With
the engine cold, unscrew the cap to
check the level.
Checks
Coolant level
The coolant level should be close
to the "MAX" mark but should never
exceed it.
When the engine is warm, the temperature of
the coolant is regulated by the fan.
The cooling fan may start after
switching off the engine: take care
with articles and clothing that might
be caught by the fan blades.
In addition, as the cooling system is pressurised,
wait at least one hour after switching off the engine
before carrying out any work.
To avoid any risk of scalding, unscrew the cap by
two turns to allow the pressure to drop. When the
pressure has dropped, remove the cap and top up
the level.
Changing the coolant
The coolant does not have to be replaced at routine services.
Fluid specification
Screenwash and headlamp
wash fluid
In the case of vehicles fitted with
headlamp washers, the low fluid level
is indicated by an audible signal and
a message in the instrument panel
screen.
Top up the reservoir when you next stop the
vehicle.
Fluid specification
For optimum cleaning and to avoid freezing,
this fluid must not be topped up with or
replaced with plain water.
In wintry conditions, the use of an
ethyl alcohol or methanol base fluid is
recommended.
Diesel additive level (Diesel
engine with particle filter)
A low additive level is indicated by illumination
of the service warning lamp, accompanied
by an audible warning and a message in the
instrument panel screen.
Topping up
This additive must be topped up by a
PEUGEOT dealer or a qualified workshop
without delay.
Used products
Avoid prolonged contact of used oil or
fluids with the skin.
Most of these fluids are harmful to
health or indeed very corrosive.
Do not discard used oil or fluids into
sewers or onto the ground.
Take used oil to a PEUGEOT dealer or
a qualified workshop (France) or to an
authorised waste disposal site.
9
The coolant must conform to the
manufacturer's recommendations.
239
Checks
Checks
Unless otherwise indicated, check these components in accordance with the warranty and maintenance record and according to your engine.
Otherwise, have them checked by a PEUGEOT dealer or a qualified workshop.
12 V battery
The battery does not require any
maintenance.
However, check that the terminals
are clean and correctly tightened,
particularly in summer and winter.
When carrying out work on the battery, refer
to the "12 V battery" section for details of the
precautions to be taken before disconnecting
the battery and following its reconnection.
The presence of this label, in particular with
the Stop & Start system, indicates the use of
a specific 12 V lead-acid battery with special
technology and specification. The involvement
of a PEUGEOT dealer or a qualified workshop
is essential when replacing or disconnecting
the battery.
240
Air filter and passenger compartment filter
Refer to the warranty and maintenance
record for details of the replacement
intervals for these components.
Depending on the environment (e.g. dusty
atmosphere) and the use of the vehicle (e.g.
city driving), replace them twice as often if
necessary.
A clogged passenger compartment filter may
have an adverse effect on the performance
of the air conditioning system and generate
undesirable odours.
Oil filter
Replace the oil filter each time the
engine oil is changed.
Refer to the warranty and
maintenance record for details of
the replacement interval for this
component.
Particle filter (Diesel)
The start of saturation of the
particle filter is indicated by
the temporary illumination of
this warning lamp accompanied by a message
in the multifunction screen.
As soon as the traffic conditions permit,
regenerate the filter by driving at a
speed of at least 40 mph (60 km/h) until
the warning lamp goes off.
If the warning lamp stays on, this
indicates a low additive level.
On a new vehicle, the first particle
filter regeneration operations may be
accompanied by a "burning" smell,
which is perfectly normal.
Following prolonged operation of the
vehicle at very low speed or at idle,
you may, in exceptional circumstances,
notice the emission of water vapour at
the exhaust on acceleration. This does
not affect the behaviour of the vehicle
or the environment.
Checks
Manual gearbox
The gearbox does not require any
maintenance (no oil change).
Refer to the warranty and
maintenance record for the details
of the level checking interval for this
component.
Electronic gearbox
The gearbox does not require any
maintenance (no oil change).
Refer to the warranty and
maintenance record for details
of the checking interval for this
component.
Automatic gearbox
The gearbox does not require any
maintenance (no oil change).
Refer to the warranty and
maintenance record for details of
the level checking interval for this
component.
Brake pads
Brake wear depends on the style
of driving, particularly in the case
of vehicles used in town, over short
distances. It may be necessary to
have the condition of the brakes checked, even
between vehicle services.
Unless there is a leak in the circuit, a drop in
the brake fluid level indicates that the brake
pads are worn.
Electric parking brake
This system does not require any
routine servicing. However, in
the event of a problem, have the
system checked by a PEUGEOT
dealer or a qualified workshop.
For more information, refer to the "Electric
parking brake - Operating faults" section.
Brake disc wear
For information on checking brake
disc wear, contact a PEUGEOT
dealer or a qualified workshop.
Parking brake
If excessive travel or a loss of
effectiveness of this system is
noticed, the parking brake must
be checked, even between
two services.
Checking this system must be done by a
PEUGEOT dealer or a qualified workshop.
Only use products recommended by
PEUGEOT or products of equivalent
quality and specification.
In order to optimise the operation of
units as important as those in the
braking system, PEUGEOT selects and
offers very specific products.
After washing the vehicle, dampness,
or in wintry conditions, ice can form
on the brake discs and pads: braking
efficiency may be reduced. Make light
brake applications to dry and defrost
the brakes.
9
241
Checks
AdBlue® additive and SCR system
for BlueHDi Diesel engines
To assure respect for the environment and
conformity with the new Euro 6 emissions
standard, without adversely affecting the
performance or fuel consumption of Diesel
engines, PEUGEOT has taken the decision to
equip its vehicles with an effective system that
associates SCR (Selective Catalytic Reduction)
with a particle filter (FAP) for the treatment of
exhaust gases.
The AdBlue ® additive is held in a special
tank located under the boot at the rear of
the vehicle. It has a capacity of 17 litres: this
provides a driving range of about 12 500 miles
(20 000 km), after which an alert is triggered
warning you when the reserve remaining is
enough for just 1 500 miles (2 400 km).
Presentation of the SCR system
During each scheduled service of your vehicle
by a PEUGEOT dealer or a qualified workshop,
the AdBlue ® additive tank is refilled in order to
allow normal operation of the SCR system.
Using an additive called AdBlue ® containing
urea, a catalytic converter turns up to 85%
of nitrous oxides (NOx) into nitrogen and
water, which are harmless to health and the
environment.
If the estimated mileage between two services
is greater than 12 500 miles (20 000 km), we
recommend that you go to a PEUGEOT dealer
or a qualified workshop to have the necessary
top-up carried out.
242
Once the AdBlue ® tank is empty, a
system required by regulations prevents
starting of the engine.
If the SCR is faulty, the level of
emissions from your vehicle will no
longer meet the Euro 6 standard: you
vehicle becomes polluting.
In the event of a confirmed fault
with the SCR system, you must go
to a PEUGEOT dealer or a qualified
workshop as soon as possible: after
a running distance of 650 miles
(1 100 km), a system will be triggered
automatically to prevent engine starting.
Checks
Range indicators
When switching on the ignition, an indicator
gives an estimate of the distance that can
be travelled with your vehicle before engine
starting is automatically prevented, once the
vehicle starts using the reserve of AdBlue ® or
after a fault is detected with the SCR system.
In the event of simultaneous system fault and
low AdBlue ® level, the shortest range is the one
displayed.
In the event of the risk of non-starting related to a lack of AdBlue®
The engine start prevention system
required by regulations is activated
automatically once the AdBlue ® tank is
empty.
Range greater than 1 500 miles (2 400 km)
When the ignition is switched on, no
information on range is displayed automatically
in the instrument panel.
Pressing this button
displays the driving
range temporarily.
Above 3 000 miles
(5 000 km), the value is
not specified.
9
243
Checks
Remaining range between 350 and 1500 miles (600 and 2 400 km)
When switching on the ignition, the
UREA warning lamp comes on, accompanied
by an audible signal and the display of a
message (e.g.: "Top up emissions additive:
Starting prevented in 900 miles") indicating
the remaining range expressed in miles or
kilometres.
When driving, the message is displayed every
150 miles (300 km) until the additive tank has
been topped-up.
Go to a PEUGEOT dealer or a qualified
workshop to have the AdBlue ® tank topped-up.
You can also top-up the tank yourself.
Refer to the "Topping-up" section.
244
Remaining range between 0 and 350 miles (0 and 600 km)
When switching on the ignition, the SERVICE
warning lamp comes on and the UREA warning
lamp flashes, accompanied by an audible
signal and the display of a message (e.g. "Top
up emissions additive: Starting prevented in
350 miles") indicating the remaining range
expressed in miles or kilometres.
When driving, the message is displayed every
30 seconds until the additive tank has been
topped-up.
Go to a PEUGEOT dealer or a qualified
workshop to have the AdBlue ® tank topped-up.
You can also top-up the tank yourself.
Refer to the "Topping-up" section.
If you fail to do this, there is a risk that you will
not be able to start your engine.
Breakdown related to a lack of AdBlue® additive
When switching on the ignition, the SERVICE
warning lamp comes on and the UREA warning
lamp flashes, accompanied by an audible
signal and the display of the message "Top up
emissions additive: Starting prevented".
The AdBlue ® tank is empty: the system required
by regulations prevents engine starting.
To be able to start the engine,
we recommend that you call on a
PEUGEOT dealer or a qualified
workshop for the top-up required. If
you carry out the top-up yourself, it is
essential to add at least 3.8 litres of
AdBlue ® to the tank.
Refer to the "Topping-up" section.
Checks
In the event of a fault with the the SCR emissions control system
In the event of the detection of a fault
A system that prevents engine starting
is activated automatically from
650 miles (1 100 km) after confirmation
of a fault with the SCR emissions
control system. Have the system
checked by a PEUGEOT dealer or a
qualified workshop as soon as possible.
When switching on the ignition, the UREA,
SERVICE and diagnostic warning lamps comes
on, accompanied by an audible signal and the
display of a message "Emissions fault" to signal
a fault with the emissions control system.
If it is a temporary fault, the alert
disappears once the exhaust gas
emissions return to normal.
During an authorised driving phase (between
650 miles and 0 miles) (1 100 km and 0 km)
If a fault with the SCR system is confirmed
(after 30 miles (50 km) covered with the
permanent display of the message signalling
a fault), when switching on the ignition, the
SERVICE and engine diagnostic warning lamps
come on and the UREA warning lamp flashes,
accompanied by an audible signal and the
display of a message (e.g.: "Emissions fault:
Starting prevented in 150 miles") indicating the
remaining range express in miles or kilometres.
While driving, the message is displayed every
30 seconds while the fault with the SCR system
persists.
You should go to a PEUGEOT dealer or a
qualified workshop as soon as possible.
Otherwise, you will not be able to restart your
engine.
9
245
Checks
Starting prevented
Every time the ignition is switched on, the
SERVICE and engine diagnostic warning
lamps come on and the UREA warning lamp
flashes, accompanied by an audible signal and
the display of the message "Emissions fault:
Starting prevented".
You have exceeded the authorised
driving limit: the starting prevention
system inhibits engine starting.
To be able to start the engine, you must call on
a PEUGEOT dealer or a qualified workshop.
246
Freezing of the AdBlue® additive
The AdBlue ® additive freezes at
temperatures below around -11°C.
The SCR system includes a heater for
the AdBlue ® tank.
In exceptional circumstances (vehicle
kept for a long period at temperatures
that are constantly below -15°C), an
emissions control system fault alert may
be related to freezing of the AdBlue ® in
your vehicle.
Park your vehicle in a warmer area for
a few hours until the additive becomes
liquid again.
The emissions alert does not go off
immediately, it will occur after several
mile of running.
Checks
Topping-up the AdBlue® additive
Filling the AdBlue ® tank is an operation
included in every routine service on your
vehicle by a PEUGEOT dealer or a qualified
workshop.
Nevertheless, given the capacity of the tank,
it may be necessary to top-up the additive
between services, more particularly if an alert
(warning lamps and a message) signals the
requirement.
You can got to a PEUGEOT dealer or a
qualified workshop.
If you envisage topping-up yourself, please
read the following warnings carefully.
Precautions in use
The AdBlue ® additive is an urea-based
solution. This liquid is non-flammable,
colourless and odourless (kept in a cool area).
In the event of contact with the skin, wash
the affected area with soap and water. In the
event of contact with the eyes, wash (irrigate)
the eyes with large amounts of water or with
an eye wash solution for at least 15 minutes.
If a burning sensation or irritation persists, get
medical attention.
If swallowed, immediately wash out the mouth
with clean water and then drink plenty of water.
In certain conditions (high ambient
temperature, for example), the risk of release
of ammonia cannot be excluded: do not inhale
the product. Ammonia vapour has en irritant
effect on mucous membranes (eyes, nose and
throat).
Use only AdBlue ® additive that meets the
ISO 22241 standard.
Never dilute the additive with water.
Never pour the additive into the Diesel
fuel tank.
The supply in a non-drip bottle simplifies
toping-up. You can obtain 1.89 litre (half a US
gallon) bottles from a PEUGEOT dealer or a
qualified workshop.
9
®
Keep AdBlue out of the reach of
children, in its original bottle.
Never transfer AdBlue ® to another
container: it would loose its purity.
Never top-up from an AdBlue ®
dispenser reserved for heavy goods
vehicles.
247
Checks
Recommendations on storage
Procedure
AdBlue ® freezes at about -11°C and
deteriorates above 25°C. It is recommended
that bottles be stored in a cool area and
protected from direct sunlight.
Under these conditions, the additive can be
kept for at least a year.
If the additive has frozen, can be used once it
has completely thawed out.
Before topping-up, ensure that the vehicle is
parked on a flat and level surface.
In wintry conditions, ensure that the
temperature of the vehicle is above -11°C.
Otherwise, by freezing, the AdBlue ® cannot
be poured into its tank. Park your vehicle in a
warmer area for a few hours to allow the top-up
to be carried out.
Never store bottles of AdBlue ® in your
vehicle.
F Switch off the ignition and remove the
key, or if your vehicle has one, press the
START/STOP button to switch of the
engine.
F For access to the AdBlue ® tank, raise the
boot carpet then, depending on equipment,
lift out the spare wheel and/or the storage
box.
F Without pressing, turn the black cap a
quarter turn anti-clockwise and lift it off.
FTurn the blue cap a 6th of a turn anticlockwise.
F Lift off the cap.
248
Checks
F After emptying the bottle, wipe away any
spillage around the tank filler using a damp
cloth.
F Obtain a bottle of AdBlue ®. After first
checking the use-by date, read carefully
the instructions on use on the label before
pouring the contents of the bottle into your
vehicle's AdBlue ® tank.
Important: if your vehicle's
AdBlue ® tank is completely empty which is confirmed by the alert
messages and the impossibility of
starting the engine, you must add at
least 3.8 litres (so two 1.89 litre bottles).
If any additive is split or splashed, wash
immediately with cold water or wipe with
a damp cloth.
If the additive has crystallised, clean it
off using a sponge and hot water.
F Refit the blue cap to the tank and turn it a
6th of a turn clockwise, to its stop.
F Refit the black cap and turn it a quarter of
a turn clockwise without pressing. Ensure
that the indicator on the cap lines up with
the indicator on the support.
F Depending on equipment, return the spare
wheel and/or the storage box to the bottom
of the boot.
F Refit the boot carpet and close the tailgate.
Important: when topping-up after
running out of additive, signalled
by the message "Top up emissions
additive: Starting prevented", you
must wait for about 5 minutes before
switching on the ignition, without
opening the driver's door, unlocking
the vehicle, introducing the key
into the ignition switch, or placing
the key of the "Keyless Entry and
Starting" system inside the vehicle.
Switch on the ignition, then wait for
10 seconds before starting the engine.
Never dispose of AdBlue ® additive
bottles in the household waste. Place
them in a special container provided
this purpose or take them to your dealer.
9
249
Technical data
Petrol engines and gearboxes
Petrol engine
Gearbox
Model code
1.6 litre VTi
120 hp
1.6 litre THP
155 hp
Electronic
(6-speed)
Manual
(6-speed)
Automatic
(6-speed)
8D5FH8/P - 8E5FH8/P
8D5FS8/P - 8E5FS8/P
8D5FV8 - 8E5FV8
8D5FNA - 8E5FNA
8D5FVA - 8E5FVA
Emissions standard
Euro 5
Euro 5
Cubic capacity (cc)
1 598
1 598
Bore x stroke (mm)
77 x 85.8
77 x 85.8
Max power: EU standard (kW)*
85
88
110
115
Max power engine speed (rpm)
6 000
6 000
Max torque: EU standard (Nm)
160
240
Max torque engine speed (rpm)
4 250
1 400
Unleaded
Unleaded
yes
yes
4.25
4.25
Fuel
Catalytic converter
Oil capacities (in litres)
Engine (with filter replacement)
* The maximum power corresponds to the value type approved on a test bed, under conditions defined by European legislation (Directive 1999/99/EC).
250
Technical data
1.6 litre e-THP
165 hp
Petrol engine
Gearbox
Model code
Emissions standard
Manual
(6-speed)
Automatic
(6-speed)
8D5GZ-M / S - 8E5GZ-M / S
8D5GZ-T / S - 8E5GZ-T / S
-
-
Cubic capacity (cc)
1 598
Bore x stroke (mm)
77 x 85.8
Max power: EU standard (kW)*
121
Max power engine speed (rpm)
6 000
Max torque: EU standard (Nm)
240
Max torque engine speed (rpm)
1 400
Fuel
Catalytic converter
Unleaded
yes
Oil capacities (in litres)
Engine (with filter replacement)
4.25
10
* The maximum power corresponds to the value type approved on a test bed, under conditions defined by European legislation (Directive 1999/99/EC).
251
Technical data
Petrol weights and towed loads (in kg)
1.6 litre VTi
120 hp
Petrol engines
1.6 litre THP
155 hp
Electronic
(6-speed)
Manual
(6-speed)
Automatic
(6-speed)
Model codes
8D5FH8/P - 8E5FH8/P
8D5FS8/P - 8E5FS8/P
8D5FV8 - 8E5FV8
8D5FNA - 8E5FNA
8D5FVA - 8E5FVA
Body
Saloon
Gearbox es
SW
Saloon
1 390
1 410
1 400
1 465
1 485
1 475
-Gross vehicle weight (GVW)
1 945
2 055
1 995
-Gross train weight (GTW)
on a 12 % gradient
3 345
3 355
-
Braked trailer (within GTW limit)
on a 10 % or 12 % gradient
1 400
-
Braked trailer** (with load transfer within the
GTW limit)
1 675
-Unladen weight
-
Kerb weight*
-Unbraked trailer
-
Recommended nose weight
730
75
SW
Saloon
SW
1 420
1 410
1 430
1 495
1 485
1 505
2 080
2 015
2 100
3 595
3 580
3 615
3 600
1 300
1 600
1 500
1 600
1 500
1 575
1 875
1 775
1 875
1 775
740
735
745
740
750
75
* The kerb weight is equal to the unladen weight + driver (75 kg).
** The weight of the braked trailer can be increased, within the GTW limit, if the GVW of the towing vehicle is reduced by an equal amount; warning,
towing using a lightly loaded towing vehicle may have an adverse effect on its road holding.
The GTW and towed load values indicated are valid up to a maximum altitude of 1 000 metres; the towed load mentioned must be reduced by 10 % for
each additional 1 000 metres of altitude.
The speed of a towing vehicle must not exceed 60 mph (100 km/h) (comply with the legislation in force in your country).
High ambient temperatures may result in a reduction in the performance of the vehicle to protect the engine; if the ambient temperature is above 37 °C,
limit the towed load.
252
Technical data
Petrol weights and towed loads (in kg)
1.6 litre e-THP
165 hp
Petrol engine
Manual
(6-speed)
Gearbox
8E5GZ-M / S
8D5GZ-T / S
Saloon
SW
Saloon
SW
1 400
1 420
1 410
1 430
1 475
1 495
1 485
1 505
-Gross vehicle weight (GVW)
1 995
2 080
2 015
2 100
-Gross train weight (GTW)
on a 12 % gradient
3 595
3 580
3 615
3 600
-
Braked trailer (within GTW limit)
on a 10 % or 12 % gradient
1 600
1 500
1 600
1 500
-
Braked trailer** (with load transfer within the
GTW limit)
1 875
1 755
1 875
1 775
745
740
Model code
Body
-Unladen weight
-
Kerb weight*
-Unbraked trailer
-
Recommended nose weight
8D5GZ-M / S
Automatic
(6-speed)
735
75
8E5GZ-T / S
750
75
* The kerb weight is equal to the unladen weight + driver (75 kg).
** The weight of the braked trailer can be increased, within the GTW limit, if the GVW of the towing vehicle is reduced by an equal amount; warning,
towing using a lightly loaded towing vehicle may have an adverse effect on its road holding.
The GTW and towed load values indicated are valid up to a maximum altitude of 1 000 metres; the towed load mentioned must be reduced by 10 % for
each additional 1 000 metres of altitude.
The speed of a towing vehicle must not exceed 60 mph (100 km/h) (comply with the legislation in force in your country).
High ambient temperatures may result in a reduction in the performance of the vehicle to protect the engine; if the ambient temperature is above 37 °C,
limit the towed load.
10
253
Technical data
Diesel engines and gearboxes
1.6 litre HDi
115 hp
Diesel engine
Manual
(6-speed)
Electronic
(6-speed)
8D9HL0 - 8E9HL0
8D9HR8/PS - 8E9HR8/PS
Gearbox
Model code
Body
Saloon
SW
Saloon
SW
Emissions standard
Euro 5
Euro 5
Cubic capacity (cc)
1 560
1 560
Bore x stroke (mm)
75 x 88.3
75 x 88,3
Max power: EU standard (kW)*
84
84
Max power engine speed (rpm)
3 600
3 600
Max torque: EU standard (Nm)
240
270
Max torque engine speed (rpm)
1 750
1 750
Fuel
Diesel
Catalytic converter
yes
Particle filter
yes
Oil capacity (in litres)
Engine (with filter replacement)
3.25
* The maximum power corresponds to the value type approved on a test bed, under conditions defined by European legislation (Directive 1999/99/EC).
254
Technical data
Diesel engines and gearboxes
Diesel engine
Gearbox
Model code
Body
2.0 litre HDi
140 hp
2.0 litre HDi
163 hp
Manual
(6-speed)
Automatic
(6-speed)
Manual
(6-speed)
8DRHR8 - 8ERHR8
8DRHF8 - 8ERHF8
8DRHHA - 8ERHHA
8DRHDA - 8ERHDA
8DRHH8 - 8ERHH8
Saloon
SW
Saloon
SW
Saloon
Emissions standard
Euro 5
Euro 5
Cubic capacity (cc)
1 997
1 997
Bore x stroke (mm)
85 x 88
85 x 88
Max power: EU standard (kW)*
100
103
100
120
Max power engine speed (rpm)
4 000
3 750
Max torque: EU standard (Nm)
320
340
Max torque engine speed (rpm)
2 000
2 000
Fuel
SW
Diesel
Catalytic converter
yes
Particle filter
yes
no
Oil capacity (in litres)
Engine (with filter replacement)
5.25
5
10
* The maximum power corresponds to the value type approved on a test bed, under conditions defined by European legislation (Directive 1999/99/EC).
255
Technical data
Diesel engines and gearboxes
2.2 litre HDi
204 hp
Diesel engine
Automatic
(6-speed)
Gearbox
Model code
Body
8D4HLA - 8E4HLA
Saloon
SW
Emissions standard
Euro 5
Cubic capacity (cc)
2 179
Bore x stroke (mm)
85 x 96
Max power: EU standard (kW)*
150
Max power engine speed (rpm)
3 500
Max torque: EU standard (Nm)
450
Max torque engine speed (rpm)
2 000
Fuel
Diesel
Catalytic converter
yes
Particle filter
yes
Oil capacity (in litres)
Engine (with filter replacement)
5.25
* The maximum power corresponds to the value type approved on a test bed, under conditions defined by European legislation (Directive 1999/99/EC).
256
Technical data
BlueHDi Diesel engines and gearboxes
Diesel engine
2.0 litre BlueHDi 150
2.0 litre BlueHDi 180
Manual
(6-speed)
Automatic
(6-speed)
Gearbox
Model code
Body
8DAHXM/S
8EAHXM/S
8DAHWT/S
8EAHWT/S
8UAHWT/S
Saloon
SW
Saloon
SW
RXH internal combustion
Emissions standard
Euro 6
Euro 6
Cubic capacity (cc)
1 997
1 997
Bore x stroke (mm)
85 x 88
85 x 88
Max power: EU standard (kW)*
110
133
Max power engine speed (rpm)
4 000
3 750
Max torque: EU standard (Nm)
370
400
Max torque engine speed (rpm)
2 000
2 000
Fuel
Diesel
Diesel
Catalytic converter
yes
yes
Particle filter
yes
yes
-
-
Oil capacity (in litres)
Engine (with filter replacement)
10
* The maximum power corresponds to the value type approved on a test bed, under conditions defined by European legislation (Directive 1999/99/EC).
257
Technical data
Diesel weights and towed loads (in kg)
1.6 litre HDi
115 hp
Diesel engine
Manual
(6-speed)
Electronic
(6-speed)
8D9HL0 - 8E9HL0
8D9HR8/PS - 8E9HR8/PS
Gearbox
Model code
Body
Saloon
SW
Saloon
SW
1 405
1 425
1 410
1 430
1 480
1 500
1 485
1 505
-Gross vehicle weight (GVW)
1 975
2 080
2 005
2 100
-Gross train weight (GTW)
on a 12% gradient
3 175
3 180
3 205
3 200
-
Braked trailer (within GTW limit)
on a 10% or 12% gradient
1 200
1 100
1 200
1 100
-
Braked trailer** (with load transfer with the
GTW limit)
1 475
1 375
1 475
1 375
740
745
740
750
-Unladen weight
-
Kerb weight*
-Unbraked trailer
-
Recommended nose weight
75
* The kerb weight is equal to the unladen weight + driver (75 kg).
** The weight of the braked trailer can be increased, within the GTW limit, if the GVW of the towing vehicle is reduced by an equal amount; warning,
towing using a lightly loaded towing vehicle may have an adverse effect on its road holding.
The GTW and towed load values indicated are valid up to a maximum altitude of 1 000 metres; the towed load mentioned must be reduced by 10 % for
each additional 1 000 metres of altitude.
The speed of a towing vehicle must not exceed 60 mph (100 km/h) (comply with the legislation in force in your country).
High ambient temperatures may result in a reduction in the performance of the vehicle to protect the engine; if the ambient temperature is above 37 °C,
limit the towed load.
258
Technical data
Diesel weights and towed loads (in kg)
Diesel engine
2.0 litre HDi
140 hp
Manual
(6-speed)
Automatic
(6-speed)
Manual
(6-speed)
8DRHR8 - 8ERHR8
8DRHF8 - 8ERHF8
8DRHHA - 8ERHHA
8DRHDA - 8ERHDA
8DRHH8 - 8ERHH8
Gearbox
Model code
Body
2.0 litre HDi
163 hp
Saloon
SW
Saloon
SW
Saloon
SW
1 430
1 500
1 520
1 540
1 480
1 500
1 505
1 575
1 595
1 615
1 555
1 575
-Gross vehicle weight (GVW)
2 065
2 140
2 105
2 180
2 075
2 140
-Gross train weight (GTW)
on a 12% gradient
3 665
3 640
3 405
3 380
3 675
3 640
-Unladen weight
-
Kerb weight*
-
Braked trailer (within GTW limit)
on a 10% or 12% gradient
1 600
1 500
1 300
1 200
1 600
1 500
-
Braked trailer** (with load transfer with the
GTW limit)
1 875
1 775
1 575
1 475
1 875
1 775
-Unbraked trailer
-
Recommended nose weight
750
750
75
75
* The kerb weight is equal to the unladen weight + driver (75 kg).
** The weight of the braked trailer can be increased, within the GTW limit, if the GVW of the towing vehicle is reduced by an equal amount; warning,
towing using a lightly loaded towing vehicle may have an adverse effect on its road holding.
The GTW and towed load values indicated are valid up to a maximum altitude of 1 000 metres; the towed load mentioned must be reduced by 10 % for
each additional 1 000 metres of altitude.
The speed of a towing vehicle must not exceed 60 mph (100 km/h) (comply with the legislation in force in your country).
High ambient temperatures may result in a reduction in the performance of the vehicle to protect the engine; if the ambient temperature is above 37 °C,
limit the towed load.
10
259
Technical data
Diesel weights and towed loads (in kg)
2.2 litre HDi
204 hp
Diesel engine
Automatic
(6-speed)
Gearbox
Model code
Body
8D4HLA - 8E4HLA
Saloon
SW
-Unladen weight
1 540
1 660
-
1 615
1 735
-Gross vehicle weight (GVW)
2 155
2 280
-Gross train weight (GTW)
on a 12% gradient
3 855
3 880
-
Braked trailer (within GTW limit)
on a 10% or 12% gradient
1 700
1 600
-
Braked trailer** (with load transfer with the
GTW limit)
1 975
1 875
Kerb weight*
-Unbraked trailer
750
-
75
Recommended nose weight
* The kerb weight is equal to the unladen weight + driver (75 kg).
** The weight of the braked trailer can be increased, within the GTW limit, if the GVW of the towing vehicle is reduced by an equal amount; warning,
towing using a lightly loaded towing vehicle may have an adverse effect on its road holding.
The GTW and towed load values indicated are valid up to a maximum altitude of 1 000 metres; the towed load mentioned must be reduced by 10 % for
each additional 1 000 metres of altitude.
The speed of a towing vehicle must not exceed 60 mph (100 km/h) (comply with the legislation in force in your country).
High ambient temperatures may result in a reduction in the performance of the vehicle to protect the engine; if the ambient temperature is above 37 °C,
limit the towed load.
260
Technical data
BlueHDi Diesel weights and towed loads (in kg)
Diesel engine
2.0 litre BlueHDi 150
2.0 litre BlueHDi 180
Manual
(6-speed)
Automatic
(6-speed)
Gearbox
Model code
Body
8DAHXM/S - 8EAHXM/S
8DAHWT/S - 8EAHWT/S
8UAHWT/S
Saloon
SW
Saloon
SW
RXH internal combustion
-Unladen weight
1 500
1 520
1 540
1 620
1 650
-
1 575
1 595
1 615
1 695
1 725
-Gross vehicle weight (GVW)
2 125
2 200
2 165
2 240
2 240
-Gross train weight (GTW)
on a 12% gradient
3 725
3 700
3 465
3 440
3 040
-
Braked trailer (within GTW limit)
on a 10% or 12% gradient
1 600
1 500
1 300
1 200
800
-
Braked trailer** (with load transfer with the
GTW limit)
1 875
1 775
1 575
1 475
1 100
Kerb weight*
-Unbraked trailer
-
Recommended nose weight
750
750
750
75
75
75
* The kerb weight is equal to the unladen weight + driver (75 kg).
** The weight of the braked trailer can be increased, within the GTW limit, if the GVW of the towing vehicle is reduced by an equal amount; warning,
towing using a lightly loaded towing vehicle may have an adverse effect on its road holding.
The GTW and towed load values indicated are valid up to a maximum altitude of 1 000 metres; the towed load mentioned must be reduced by 10 % for
each additional 1 000 metres of altitude.
The speed of a towing vehicle must not exceed 60 mph (100 km/h) (comply with the legislation in force in your country).
High ambient temperatures may result in a reduction in the performance of the vehicle to protect the engine; if the ambient temperature is above 37 °C,
limit the towed load.
10
261
Technical data
Dimensions (in mm)
Saloon
262
SW
Technical data
RXH internal combustion version
(available during the 2nd half of 2014)
Be aware of the ground clearance of your vehicle: around 184 mm (with the vehicle in working order: driver only and the fuel tank full) in ideal
conditions.
This value will vary with vehicle load, the nature of the ground surface and the surroundings.
If the driver considers that the vehicle can traverse an obstacle, they assume entire responsibility for this.
10
263
Technical data
Identification markings
Various visible markings for the identification and tracing of your vehicle.
It bears the following information:
- the tyre inflation pressures with and without
load,
- the tyre sizes,
- the inflation pressure of the spare wheel,
- the paint colour code.
264
A. Vehicle Identification Number (VIN)
under the bonnet.
This number is engraved on the bodywork
near the damper support.
C. Manufacturer's label.
The VIN is indicated on a self-destroying
label affixed to the door aperture, on the
driver's side.
B. Vehicle identification Number (VIN) on
the windscreen lower crossmember.
This number is indicated on a selfadhesive label which is visible through the
windscreen.
D. Tyre/paint label.
This label is fitted to the middle pillar, on
the driver's side.
The tyre pressures must be checked
when the tyres are cold, at least once
a month.
Low tyre pressures increase fuel
consumption.
Emergency or assistance call
265
Emergency or assistance call
PEUGEOT Connect SOS
In an emergency, press this button for more than
2 seconds. Flashing of the green LED and a voice
message confirm that the call has been made to the
"PEUGEOT Connect SOS" centre*.
The green LED remains on (without flashing) when communication is
established. It goes off at the end of communication.
Pressing this button again immediately cancels the request. The green
LED goes off. Cancellation is confirmed by a voice message
To cancel a call, tell the "PEUGEOT Connect SOS" call centre that the call
was a mistake.
"PEUGEOT Connect SOS" immediately locates your vehicle, starts
communication with you in your language**, and where necessary sends
the appropriate public emergency services**. In countries where the
service is not available, or when the locating service has been expressly
declined, the call sent directly to the emergency services (112) without the
vehicle location.
If an impact is detected by the airbag control unit, and
independently of the deployment of any airbags, an emergency call
is made automatically.
*S
ubject to the general conditions for the service available from dealers
and to technological and technical limitations.
** Depending on the geographical cover of "PEUGEOT Connect SOS",
"PEUGEOT Connect Assistance" and the official national language
selected by the owner of the vehicle.
The list of countries covered and PEUGEOT CONNECT services
services is available from dealers or at www.peugeot.co.uk.
266
PEUGEOT Connect Assistance
Press this button for more than 2 seconds to request
assistance if the vehicle breaks down.
A voice message confirms that the call has been made**.
Pressing this button again immediately cancels the request.
The cancellation is confirmed by a voice message.
Operation of the system
When the ignition is switched on, the green
LED comes on for 3 seconds indicating
that the system is operating correctly.
If the orange LED flashes: there is a
system fault.
If the orange LED is on continuously: the
backup battery must be replaced.
In either case, contact a PEUGEOT
dealer.
If you purchased your vehicle outside the PEUGEOT dealer network,
we invite you to have a dealer check the configuration of these services
and, if desired, modified to suit your wishes. In a multi-lingual country,
configuration is possible in the official national language of your choice.
For technical reasons and in particular to improve the quality of
"PEUGEOT CONNECT services" services to customers, the manufacturer
reserves the right to carry out updates to the vehicle's on-board telematic
system.
JBL EQUIPMENT
The Hi-Fi system is a 5.1 system developed by PEUGEOT in conjunction with JBL.
4 two-way speaker kits, separated by an active filter, are fitted at front and
rear.
These are based on a fabric dome tweeter delivering stable and balanced
treble reproduction and a 50W RMS neodymium magnet inverted motor
medium-woofer possessing a very high output of bass frequencies.
The central line in the dashboard improves reproduction of the musical
scene, putting the listener in a situation that realistically reproduces the
original musical recording.
The bass unit located in the boot carries a 150W triple-coil true subwoofer
in an optimised space, giving depth and impact to the bass ranges.
This set of speakers is controlled by a 10-way 500W RMS 2 ohm
amplifier, using advanced surround sound and sound distribution
handling, so as to deliver optimum performance both for the driver and for
the passengers in the vehicle.
267
268
7-inch touch screen
GPS satellite navigation system
Multimedia audio system
Bluetooth® telephone
CONTENTS
The system is protected in such a way that it will only
operate in your vehicle.
For safety reasons, the driver must carry out operations
which require prolonged attention while the vehicle is
stationary.
When the engine is switched off and to prevent
discharging of the battery, the system switches off
following the activation of the energy economy mode.
01 General operation
p.
270
02 First steps - Control panel
p.
272
03 Steering mounted controls
p.
273
04Media
p.
274
05Navigation
p.
292
06Configuration
p.
312
07 Connected services
p.
322
08Telephone
p.
324
Frequently asked questions
p.
334
269
01 General operation
"Navigation"*
allows settings for navigation
and the choice of a destination.
"Driving assistance"
allows access to the trip
computer and certain vehicle
functions to be activated,
deactivated and adjusted.
270
"Telephone"
allows the connection of a
mobile telephone via Bluetooth.
"Media"
allows selection of a radio
station, the various music
sources and the display of
photographs.
"Configuration"
allows audio settings to be
adjusted, the color scheme to
be selected and the brightness
of the instruments and controls
to be adjusted.
"Connected services"*
allows connection to an
applications portal to facilitate,
make safe and personalise
journeys by means of a
connection key available on
subscription from a PEUGEOT
dealer.
* Depending on equipment.
01 General operation
Use the buttons below the touch screen for access to the menus, then press the virtual
buttons in the touch screen.
Each menu is displayed in one or two pages (primary page and secondary page).
Primary page
Secondary page
In very hot conditions, the system may go into stand-by (screen and sound completely off) for a minimum period
of 5 minutes.
271
02 First steps
With the engine running, press to
mute the sound.
With the ignition off, press to switch
the system on.
Short-cuts: using the touch buttons
in the upper band of the touch
screen, it is possible to go directly
to the selection of audio source, the
list of stations (or titles, depending
on the source).
Volume adjustment (each
source is independent, including
Traffic announcements (TA) and
navigation instructions).
Following prolonged
operation in sunny conditions,
the volume may be limited
to protect the system. The
return to normal takes place
when the temperature in the
passenger compartment
drops.
Selecting the audio source (depending on version):
- "FM" / "AM" / "DAB"* stations.
- "USB" memory stick.
- CD player (located in front panel).
- Jukebox*, after first copying audio files to the internal memory of the system.
-Telephone connected by Bluetooth* and audio streaming Bluetooth* (streaming).
- Media player connected to the auxiliary socket (jack, cable not supplied).
The screen is of the "resistive" type, it is necessary to press firmly, particularly for "flick" gestures (scrolling through a list, moving the map...). A
simple wipe will not be enough. pressing with more than one finger is not recognised.
The screen can be used when wearing gloves. This technology allows use at all temperatures.
To clean the screen, use a soft non-abrasive cloth (spectacles cloth) without any additional product.
Do not use pointed objects on the screen.
Do not touch the screen with wet hands.
* Depending on equipment.
272
03 Steering mounted controls
-
-
Press: access to the instrument panel
screen menu.
Rotate: navigation in the instrument
panel screen menu.
-
Increase volume.
-
Mute / restore sound.
-
Decrease volume.
-Rotate
Radio: automatic selection of next /
previous frequency.
Media: previous / next track.
-
Short press then rotate: access to the
preset stations.
-
Short press: change the audio source.
-TEL/SRC button (short press):
Accept an incoming call.
Call in progress: access to telephone
menu: hang up, secret mode, handsfree mode.
-TEL/SRC button (long press):
Reject an incoming call or end a call in
progress.
When not making a call (long press):
access to the telephone menu
(Contacts, Calls log).
-
Access to the menu carousel.
-
Radio: display the list of stations.
Media: display the list of tracks.
273
04 Media
Level 1
"Media"
Level 2
List of FM stations
Primary page
Preset
274
Level 3
Level 1
Level 2
Level 3
Comments
Media
List of FM stations
Press on a radio station to select it.
List
FM Radio
DAB Radio
AM Radio
Jukebox
Media
CD
Select change of source
Source
USB
iPod
Bluetooth
AUX
Media
Pres an empty location to Preset it.
Preset
275
04 Media
Level 1
"Media"
Level 2
Level 3
List of FM stations
Secondary page
Media
Photos
Copy to Jukebox
276
Manage Jukebox
Level 1
Media
Level 2
Level 3
Comments
Preset
Press a radio station to select it.
Update list
Update the list of stations received.
Frequency
Enter the desired radio frequency.
Confirm
Save the settings.
Page selection
Display the selected photo full screen.
Rotate
Rotate the photo 90°.
Select all
Select all the photos in the list.
Press again to deselect.
Secondary page
Radio list
Media
Secondary page
Photos
Previous photo.
Slideshow
Pause / Play.
Display the photos in sequence, full screen.
Next photo.
Confirm
Save the settings.
Sort by folder
Sort by album
Media
Choose the selection mode.
Select all
Create folder
Secondary page
Rename
Choose the handling mode.
Manage Jukebox
Magnifying glass
Delete
Select all
Confirm
Copy
Save the options.
Save the settings
277
04 Media
Level 1
Level 2
Level 3
"Media"
Secondary page
Media
Settings
Settings
Settings
278
Level 1
Level 2
Level 3
Comments
Media
Secondary page
Presentation of the last media used.
Media list
Random (all tracks):
Media
Random (current album):
Choose the play settings.
Settings
Loop:
Aux. amplification
RDS options
Media
Radio
Secondary page
Settings
DAB/FM options
Display Radio Text
Activate or deactivate the options.
Settings
DAB radio thumbnails
Traffic announcements (TA)
Announcements
Weather
Activate or deactivate the options.
Settings
Varied - Sport
Alert settings
Confirm
Save the settings.
279
04 Radio
Selecting a station
Press on Media to display the primary page.
or
Press on Media to display the primary page
then go to the secondary page.
Press Media to display the primary
page then select "Preset".
OR
Select "List" in the primary page.
or
Select "Radio list" in the secondary page.
Select a preset radio station in the list.
Select a radio station from the list offered.
If necessary, select change of source.
Select "Update list" to refresh the list.
Select "FM Radio" or "AM Radio".
The exterior environment (hills, buildings, tunnel, car park, below ground...) may prevent reception, even in RDS station tracking mode.
This phenomenon is normal in the propagation of radio waves and is in no way indicative of a fault with the audio system.
280
04 Radio
Changing a radio frequency
Press on Media to display the primary
page then press on the secondary
page.
Press on Media to display the primary
page.
OR
By automatic frequency search
Press 3 or 4 to move the cursor
for an automatic search down or up
for a radio frequency.
Press on "Enter frequency" to display
the primary page then press on the
secondary page.
THEN
Enter the frequency in full
(e.g.: 92.10 MHz) using the keypad
then "Confirm".
Select change source.
OR
Select "FM Radio" or "AM Radio".
By alphabetical list
Press the current radio band then
choose the radio station from the list
offered.
281
04 Radio
Preset a station
Select a radio station or frequency
(refer to the corresponding section).
Press on "Preset".
Select a number in the list to preset the
previously chosen radio station.
A long press on a number presets (memorises)
the station.
Or
A press on this button presets all of the stations
one after the other.
Recall pre-set stations
Press on Media to display the primary page
then select "Save".
282
04 Radio
Activate/ Deactivate RDS
Press on Media to display the primary page
then go to the secondary page.
Select "Settings".
Select "Radio".
Activate/deactivate "RDS options".
RDS, if activated, allows you to continue listening to the same
station by automatic retuning to alternative frequencies. However, in
certain conditions, coverage of an RDS station may not be assured
throughout the entire country as radio stations do not cover 100 % of
the territory. This explains the loss of reception of the station during
a journey.
283
04 Radio
Display of the
name of the current
station.
Short-cut: access to the choice
of audio source and the list of
stations (or titles, depending on
the source).
Select the radio
station.
Any thumbnail broadcast by
the station.
Select the audio source.
Display the "DAB" band.
Manage the Jukebox.
Display current action.
Display of "Radiotext" for the
current station.
Secondary page.
Next "Multiplex".
Next radio station.
Previous "Multiplex".
Previous radio station.
Preset stations,
buttons 1 to 15
Short press: select the
preset radio station.
Long press: preset a radio
station.
Display the name and
number of the multiplex
service being used.
Display of options:
if active but not available, the display will be greyed out,
if active and available, the display will be blank.
If the "DAB" radio station being
listened to is not available on "FM",
the "DAB FM" option is greyed out.
Journaline® is a text-based information service designed for digital radio systems. It provides up to date text-based
information similar to that offered by an electronic magazine or paper. The information is structured around topics and
sub-topics.
284
04 Radio
DAB (Digital Audio Broadcasting)
Digital radio
Digital radio - DAB / FM auto tracking
Digital radio provides higher quality reception and also the
graphical display of current information on the radio station being
listened to. Select "List" in the primary page.
The range of multiplexes available is displayed in alphabetical
order.
"DAB" does not cover 100% of the territory.
When the digital radio signal is weak, "DAB / FM auto tracking"
allows you to continue listening to the same station, by
automatically switching to the corresponding "FM" analogue
station (if there is one).
Press on Media to display the primary page.
Press Media to display the primary page then
press on the secondary page.
Select "Settings".
Select change of source.
Select "RADIO".
Select "DAB Radio".
Select "Digital/FM auto tracking" then
"Confirm".
Select "List" in the primary page.
or
Select "Radio list" in the secondary page.
If "DAB / FM auto tracking" is activated, there is a difference of a
few seconds when the system switches to "FM" analogue radio with
sometimes a variation in volume.
When the digital signal is restored, the system automatically
changes back to "DAB".
Select the radio station from the list offered.
If the "DAB" station being listened to is not available on "FM" ("DAB/
FM" option greyed out), or "DAB / FM auto tracking" is not activated,
the sound will cut out while the digital signal is too weak.
285
04 Music
CD, MP3 CD, USB player, auxiliary input
Insert the CD in the player, insert the USB
memory stick in the USB player or connect the
USB peripheral to the USB port using a suitable
cable (not supplied).
The system builds playlists (in temporary
memory), an operation which can take from
a few seconds to several minutes at the first
connection.
Reduce the number of non-music files and the
number of folders to reduce the waiting time.
The playlists are updated every time the ignition
is switched off or connection of a USB memory
stick. However, the system memorises these
lists and if they are not modified, the loading
time will be shorter.
Selection of source
Press on Media to display the primary page.
Select change of source then choose the
source.
The steering mounted SRC (source) button can be used to go to the
next media source, available if the source is active.
Press OK to confirm the selection.
"CD / CD MP3"
"Radio"
"Auxiliary"
286
"USB, iPod"
"Bluetooth (streaming)"
04 Music
CD, MP3 CD / USB player
Information and advice
The audio equipment will only play audio files with ".wma, .aac,
.flac, .ogg and. mp3" file extensions and with a bit rate of between
32 Kbps and 320 Kbps.
It also supports VBR (Variable Bit Rate) mode.
No other type of file (.mp4, ...) can be played.
WMA files must be of the standard wma 9 type.
The sampling rates supported are 11, 22, 44 and 48 KHz.
It is advisable to restrict file names to 20 characters, without using of
special characters (e.g.: " " ? ; ù) to avoid any playing and displaying
problems.
In order to be able to play a recorded CDR or CDRW, when
recording it is preferable to select the ISO 9660 level 1, 2 or Joliet
standard.
If the disc is recorded in another format it may not be played
correctly.
It is recommended that the same recording standard is always used
for an individual disc, with as low a speed as possible (4x maximum)
for optimum sound quality.
In the particular case of a multi-session CD, the Joliet standard is
recommended.
The system supports USB mass storage devices, BlackBerry®
devices or Apple® players via USB ports. The adaptor cable not
supplied.
Control of the peripheral device is with the audio system controls.
Other peripherals, not recognised on connection, must be connected
to the auxiliary socket using a Jack cable (not supplied).
Use only USB memory sticks formatted FAT 32 (28-bit file allocation
table).
The system does not support two identical devices connected at the
same time (two memory sticks, two Apple® players) but it is possible
to connect one memory stick and one Apple® player at the same
time.
It is recommended that official Apple® USB cables are used to
ensure correct operation.
287
04 Music
Selecting a track to play
Previous track.
/
List of USB or CD tracks and folders.
Next track.
/
Up or down in the list.
Previous folder.
Confirm, next menu level.
Next folder.
Up one menu level.
288
04 Music
Connecting APPLE® players
Connect the Apple® player to one of the USB ports using a suitable
cable (not supplied).
Play starts automatically.
Audio streaming
Streaming allows audio files on your telephone to be played via the
vehicle's speakers.
Connect the telephone: see the "Telephone" section, then
"Bluetooth".
Choose the "Audio" or "All" profile.
Control is via the audio system.
The classifications available are those of the portable device
connected (artists / albums / genres / playlists / audiobooks /
podcasts).
The default classification used is by artist. To modify the
classification used, return to the first level of the menu then select
the desired classification (playlists for example) and confirm to go
down through the menu to the desired track.
Copies of photos and album artwork are not compatible with the
audio system. These appear only with a USB memory stick.
The version of software in the audio system may not be compatible
with the generation of your Apple® player.
If play does not start automatically, it may be necessary to start the
audio playback from the telephone.
Control is from the peripheral device or by using the audio system
buttons.
Once connected in streaming mode, the telephone is considered to
be a media source.
It is recommended that you activate "Repeat" on the Bluetooth
peripheral.
289
04 Music
Using the auxiliary input (AUX)
(cable not supplied)
Connect the portable device (MP3 player…) to the auxiliary JACK
socket using an audio cable.
Select Media to display the primary page.
Select change the source.
Select the AUXILIARY source.
First adjust the volume of your portable device (to a high level). Then
adjust the volume of your audio system.
Display and management of the controls are via the portable device.
290
04 Music
Managing the Jukebox
Connect the device (MP3 player...) to the USB port or auxiliary
socket using a suitable audio cable.
Select the magnifying glass to enter the folder
or album and select audio file by audio file.
When no audio file is copied to the system with a capacity of 8GB,
all of the Jukebox function symbols are greyed and are not available.
Select "Confirm" then "Copy".
Select "Media list".
Select "New folder" to create a folder structure
in the Jukebox or select "Keep structure" to
retain the structure from the device.
Select copy "Copy Jukebox".
Select "Sort by folder" or "Sort by album".
While copying the system returns to the primary
page; you can go back to the copy view at any
time by selecting this button.
291
05 Navigation
Level 1
Level 2
Navigation
"Navigation"
Primary page
292
Level 3
Route settings
Level 1
Level 2
Level 3
Enter destination
Comments
Display recent destinations
Fastest
Shortest
Time/distance
Ecological
Calculatory criteria
Tolls
Choose the navigation criteria.
The map displays the route chosen according to these
criteria.
Ferries
Navigation
Strict - Close
Settings
Navigation
Show route on map
Display the map and start navigation.
Confirm
Save the options.
Save
Save the current address.
Stop navigation
Delete the navigation information.
Voice
Choose the volume for voice and announcement of street
names.
Diversion
Detour from your initial route by a certain distance.
Display in text mode
Zoom in.
Navigation
Zoom out.
Display in full screen mode.
Use the arrows to move the map.
Switch to 2D map.
293
05 Navigation
Level 1
"Navigation"
Level 2
Enter destination
Level 3
Address
For managing contacts and
their addresses, refer to the
"Communications" section.
Secondary page
Contacts
Navigation
To use the telephone functions,
refer to the "Communications"
section.
Search for a point of interest
Search for a POI by name
Point of interest displayed on the map
294
Level 1
Level 2
Level 3
Comments
Curr. location
Points of Interest
Address
Navigation
Address settings
Town centre
Save
Save the current address.
Add waypoint
Add a waypoint to the route.
Navigate to
Press to calculate the route.
Addresses
Add contact
Secondary page
Contacts
Enter destination
Add waypoint
Select a contact then calculate the route.
Search for contact
Navigate to
From map
Display the map and zoom to view the roads.
Itinerary
Create, add or delete a waypoint or view the itinerary.
Stop
Delete navigation information.
Navigate to
Press to calculate the route.
All POIs
Navigation
Secondary page
Garage
Dining/hotels
Personal
Search for POI
By name
Navigation
Select all
Search
Delete
Secondary page
Show POIs
List of categories available.
After choosing the category, select the points of interest.
Save the settings.
Choose the display settings for POIs.
Import POIs
Confirm
Save the options.
295
05 Navigation
Level 1
Level 2
Level 3
Diversion
"Navigation"
Traffic messages
Secondary page
Map settings
Map settings
Navigation
Settings
Settings
Settings
Moving between the
two menus.
296
Level 1
Level 2
Level 3
Comments
On the route
Navigation
Secondary page
Traffic messages
Around vehicle
Settings for the choice of messages and the filter radius.
Near destination
Detour over a distance
Detour
Recalculate route
Finish
Save the options.
Flat view north heading
Orientation
Flat view vehicle heading
Perspective view
Navigation
Maps
Secondary page
Map settings
Choose the display and orientation of the map.
"Day" map colour
Aspect
"Night" map colour
Automatic day/night
Confirm
Save the settings.
Route settings
Navigation
Voice
Secondary page
Alert!
Settings
Enter settings and choose the volume for the voice and
announcement of street names.
Traffic options
Confirm
Save the options.
297
05 Navigation - Guidance
Choosing a new destination
Towards a new destination
Press on Navigation to display the primary
page then go to the secondary page.
Select "Enter destination".
Select "Navigate to".
Choose the navigation criteria: "Fastest" or
"Shortest" or "Time/distance" or "Ecological".
Choose the restriction criteria: "Include
tollroads", "Include ferries", "Traffic", "Strict",
"Close".
Select "Address".
Select "Confirm" or press "Show route on
map" to start navigation guidance.
298
Select the "Country:" from the list offered then
in the same way:
the "City:" or its post code, the "Road:",
the "N°:". Confirm each time.
To delete navigation information, press on
"Settings" then "Stop navigation".
Select "Save" to save the address entered as a
contact entry.
The system allows up to 200 entries.
To restore the navigation information press on
"Settings" then "Resume navigation".
05 Navigation - Guidance
Towards a recent destination
Press on Navigation to display the primary
page then go to the secondary page.
Towards a contact
Navigation towards a contact imported from a telephone is only
possible if the address entered is compatible with the system.
Press on Navigation to display the primary
page then go to the secondary page.
Select "Enter destination".
Select "Enter destination".
Select "Contacts".
Select an address from the list offered.
Select a destination from the contacts in the list
offered.
Select "Navigate to".
Select the criteria then "Confirm" or press
"Show route on map" to start guidance.
Select "Navigate to".
Select the criteria then "Confirm" to start
guidance.
299
05 Navigation - Guidance
300
Towards GPS coordinates
Towards a point on the map
Press on Navigation to display the primary
page then go to the secondary page.
Press on Navigation to display the primary
page then go to the secondary page.
Select "Enter destination".
Select "Enter destination".
Select "Address".
Select "From map".
Enter the "Longitude:" then the "Latitude:".
Zoom in on the map then select the point.
Select "Navigate to".
Select the criteria then "Confirm" or press
"Show route on map" to start guidance.
A long press displays the surrounding tourist attractions.
05 Navigation - Guidance
Towards points of interest (POI)
Press on Navigation to display the primary
page then go to the secondary page.
Select "Search for POI".
Select "All POIs" or "Garage" or "Dining/
hotels" or "Personal" or "By name".
Points of Interest (POI) show all of the locations of services nearby (hotels,
retail outlet, airports, ...).
Select a point of interest from the list offered.
Select "Navigate to".
An annual mapping update allows new points of interest to be
presented to you.
You can also update the Risk areas / Danger areas every month.
The detailed procedure is available on:
http://peugeot.navigation.com.
Select a category from the list offered.
Select "Search".
301
05 Navigation - Guidance
Towards points of interest (POI)
Press on Navigation to display the primary
page then go to the secondary page.
Select "Show POIs".
Select a category from the list offered then
"Confirm".
302
05 Navigation - Guidance
Risk area / Danger zone alert settings
Press on Navigation to display the primary
page then go to the secondary page.
Select "Confirm".
Select "Settings".
These functions are only available if Risk Areas have been
downloaded and installed on the system.
Select "Alert config.".
It is then possible to activate Risk Areas alerts then:
- "Audible warning"
- "Alert only when navigating"
- "Alert only for overspeed"
- "Display speed limits"
-Timing: the choice of timing allows the time before giving a Risk
Area alert to be defined.
303
05 Navigation - Guidance
Adding a waypoint
Organising waypoints
Press on Navigation to display the primary
page then go to the secondary page.
To organise waypoints, carry out the previous operations 1 to 3
again (Adding a waypoint).
Select "Enter destination".
Select the waypoint that you want to move in
the order.
Select "Itinerary".
Select "Up".
Select "Add waypoint" then "Address".
Select "Down".
304
The address of the waypoint is entered in
the same way as a destination, so enter
the "City:" or post code, the "Road:" and
the "N°:". Confirm each time.
Then select "Add waypoint".
Select "Delete".
Select "Navigate to".
Select the criteria then "Confirm" to start
guidance and give the general direction of the
navigation route.
Select "Road map" to view the changes made
to the route.
05 Navigation - Guidance
Route options
Calculation criteria
Press Navigation to display the primary page
then go to the secondary page.
It is then possible to choose:
- the navigation criteria: "Fastest", "Shortest", "Time/distance",
"Ecological".
- the exclusion criteria: "Include tollroads", "Include ferries",
"Traffic", "Strict", "Close".
Select "Settings".
Select "Confirm".
Select "Criteria".
The ecological calculation is based on mapping data but this may
not always be correct.
305
05 Traffic
Traffic information
Display of messages
Setting filters
Press on Navigation to display the primary
page then go to the secondary page.
Press on Navigation to display the primary
page then go to the secondary page.
Select "Traffic messages".
Select "Settings".
Set the "On the route", "Around", "Near
destination" filters to fine-tune the list.
Press again to remove the filter.
Select "Info option".
Select the message from the list offered.
Select the magnifying glasses to have the
information spoken.
Select:
-"Warn of new messages",
-"Speak messages",
Then enter the filter radius.
Select "Confirm".
TMC (Traffic Message Channel) messages on GPS-Navigation
contain traffic information transmitted in real time.
306
We recommend a filter radius of:
- 12 miles (20 km) in urban areas,
- 30 miles (50 km) on motorways.
05 Traffic
Main traffic symbols
Receiving TA messages
Red and yellow triangle: traffic information, for example:
Press on Navigation to display the primary
page then go to the secondary page.
Modified signs
Narrow carriageway
Slippery surface
Accident
Delay
Roadworks
Risk of explosion
Road closed
Demonstration
Danger
No entry
Traffic jam
Select "Settings".
Select "Voice".
Black and blue triangle: general information, for example:
Weather reports
Traffic reports
Wind
Fog
Parking
Snow / ice
Activate / Deactivate "Traffic (TA)".
The TA (Traffic Announcement) function gives priority to TA alert
messages. To operate, this function needs good reception of a
radio station transmitting this type of message. When a traffic report
is transmitted, the current audio source (Radio, CD, USB, ...) is
interrupted automatically to play the TA message. Normal playback
of the audio source resumes at the end of the transmission of the
message.
307
05 Traffic
Diverting from a route
Press on Navigation to display the primary
page then go to the secondary page.
Select "Recalculate route". The route
will be modified in time and distance.
Select "Traffic messages".
Select "Confirm".
Select "Diversion".
The route may be diverted following the reception of a traffic
information message.
Select the diversion distance by pressing + or -.
308
05 Map
Map settings
Map orientation
Press on Navigation to display the primary
page then go to the secondary page.
Select "Map settings".
Select "Orientation".
Select:
-"Flat view north heading" to keep the map
always North up,
-"Flat view vehicle heading" to have the
map follow the direction of travel,
-"Perspective view" to display a
perspective view.
Select "Confirm" to save the modifications.
309
05 Map
Configure
Press on Navigation to display the primary
page then go to the secondary page.
Select "Map settings".
Select:
-""Day" map colour" to have the map
always in day mode.
-""Night" map colour" to have the map
always in night mode.
-"Automatic day/night" to have
the brightness of the map adjusted
automatically according to the ambient light
level.
This mode makes use of the vehicle's
sunshine sensor or by manual operation of
the vehicle's lighting.
Then "Confirm" to save the modifications.
Select "Aspect".
Street names are visible on the map from the 100 m scale.
310
05 Settings
Navigation speech synthesis
Volume / Street names
Press on Navigation to display the primary
page then go to the secondary page.
Select "Voice synthesis" and/or "Male voice"
and/or "Female voice" and/or "Speak road
names".
Select "Settings".
Select "Voice".
Select "Confirm" to save the modifications.
311
06 Configuration
Level 1
"Configuration"
Level 2
Level 3
Audio settings
Primary page
Audio settings
Audio settings
Choice of color scheme
312
Level 1
Configuration
Audio settings
Level 2
Comments
Ambience
Choose the sound ambience.
Balance
Set the position of the sound in the vehicle using the
Arkamys® system.
Sound effects
Set the volume or activate the link to vehicle speed.
Ringtones
Set the telephone ringtone and volume.
Voice
Set the volume and voice for speaking street names
Confirm
Save the settings.
Configuration
Turn off the display (black screen). A press on the black
screen restores the display.
Turn off screen
Configuration
Level 3
Confirm
Having chosen the environment, save the setting.
Color schemes
313
06 Configuration
Level 1
"Configuration"
Level 2
Units
Secondary page
Factory settings
Configuration
Adjust date and time
Display screen
314
Level 1
Configuration
Level 2
Comments
Units
Set the units used to display distance, fuel consumption and
temperature.
Delete data
Select the desired data in the list then press Delete.
Factory settings
Return to factory settings.
Confirm
Save the settings.
Confirm
Set the date and time then confirm.
Secondary page
System Settings
Configuration
Secondary page
Time/Date
Automatic text scrolling
Configuration
Secondary page
Deactivate animations
Make the setting then confirm.
Screen settings
Confirm
315
06 Configuration
Level 1
"Configuration"
Level 2
Choice of language
Secondary page
Configuration
Calculator
Calendar
316
Level 1
Level 2
Comments
Configuration
Secondary page
Confirm
Select the language then confirm.
Languages
Configuration
Secondary page
Select the calculator.
Calculator
Configuration
Secondary page
Select the calendar.
Calendar
317
06 Configuration
Audio settings
Press on Configuration to display the primary
page.
Select "Audio settings".
Select "Ambience" or "Balance" or "Sound
effects" or "Ringtones" or "Voice".
The distribution (or spatialisation using the Arkamys© system)
of sound is an audio process that allows the audio quality to be
adapted to the number of listeners in the vehicle.
Available only with the 6-speaker configuration.
The audio settings (Ambience, Bass, Treble and Loudness) are
different and independent for each sound source.
The settings for distribution and balance are common to
all sources.
318
-"Ambience" (choice of 6 musical ambiences)
-"Bass"
-"Treble"
-"Loudness" (Activate/Deactivate)
-"Balance", "Driver", "All passengers", "Front only"
-"Audio setting on touch screen"
-"Volume linked to vehicle speed:" (Activate/Deactivate)
On-board audio: Arkamys© Sound Staging.
With Sound Staging, the driver and passengers are immersed in an
"audio scene" recreating the natural atmosphere of an auditorium:
truly a part of the scene and its surroundings.
This new sensation is made possible by software in the audio
system which processes the digital signals from the media players
(radio, CD, MP3…) without changing the audio settings. This
processing takes account of the characteristics of the passenger
compartment to produce optimum results.
The Arkamys© software installed in your audio system processes
the digital signal from the media players (radio, CD, MP3, ...) and
recreates a natural musical scene, with harmonious placement of
instruments and voices in the space in front of passengers, level with
the windscreen.
06 Configuration
Color schemes
Press on Configuration to display the primary
page.
Select "Color schemes".
Select the colour scheme in the list then
"Confirm".
At each change of colour scheme the touch screen tablet's system
restarts, showing a black screen for a few moments.
For safety reasons, the procedure for changing the colour scheme is
only possible with the vehicle stationary.
319
06 Configuration
System
Modify system settings
Press on Configuration to display the primary
page then go to the secondary page.
Press on Configuration to display the primary
page then go to the secondary page.
Select "System Settings".
Select "Screen settings".
Select "Units" to change the units of distance,
fuel consumption and temperature.
Activate or deactivate "Activate automatic text
scrolling" and "Activate animations".
Select "Delete data" to delete the list of recent
destinations, personal points of interest,
contacts in the list.
Choose the item then select "Delete".
Select "Factory settings" to return to the
original settings.
320
06 Configuration
Press on Configuration to display the primary
page then go to the secondary page.
Select:
-"Time/Date" to change the time zone,
synchronisation with GPS, time and its
format and then the date.
-"Languages" to change the language.
-"Calculator" to display a calculator
-"Calendar" to display a calculator.
321
07 Connected services
Level 1
Level 2
"Connected services"
Primary page:
Driving assistance
applications, see following
page on "PEUGEOT
CONNECT APPS"*.
Identification
Secondary page:
Internet navigation via
Bluetooth telephone Dial-Up
Networking (DUN).
DUN connection settings
It may be that certain new
generation smartphones
are not compatible with this
standard.
Transfer rate
* Depending on country.
322
07 PEUGEOT CONNECT APPS
"PEUGEOT CONNECT APPS" is a service providing driving aid applications in real time, that gives access to useful information such as the
state of the traffic, danger zones, fuel prices, the availability of parking places, tourist sites, weather conditions, correct addresses…
It includes access to the mobile network associated with the use of these applications. "PEUGEOT CONNECT APPS" is a service available
under subscription contract from PEUGEOT dealers, depending on country and the type of touch screen, both before and after delivery of a
new vehicle.
Plug the "PEUGEOT CONNECT APPS" connection key into one of
the USB ports.
These applications use vehicle
data such as the current speed,
mileage, remaining fuel range
or even GPS position to provide
pertinent information.
For safety reasons, some functions can only be used when
stationary.
For the best reception, it is recommended to connect the "PEUGEOT
CONNECT APPS" key to the USB port located in the glove box
(available according to equipment).
Press the "Connected services" menu to display the applications.
The "MyPeugeot" application
is a link between the user, the
manufacturer and its dealer
network.
It allows the customer to know
everything about their vehicle:
servicing plan, accessory range,
service contracts taken out, ...
It also makes possible the sending
of the vehicle's mileage to the
"MyPeugeot" site, or to identify
a dealer.
323
08 Telephone
Level 1
Level 2
"Telephone"
Primary page
Call log
Contacts
324
Level 3
Level 1
Level 2
Level 3
Comments
All calls
Incoming calls
Outgoing calls
Telephone
Contacts
After making choices, start the call.
Call log
View
Magnifying glass
Create
Call
Addresses
New
Import
Delete
View
Telephone
Delete all
After making choices, start the call.
Search for contact
Contacts
Confirm
Navigate to
Search for contact
Call
325
08 Telephone
Level 1
"Telephone"
Level 2
Bluetooth (equipment)
Secondary page
Telephone connection
Devices detected
Telephone Options
326
Level 3
Level 1
Level 2
Level 3
Comments
Search
Start the search for another peripheral device to connect.
Disconnect
Stop the Bluetooth connection to the selected
peripheral device.
Secondary page
Update
Import the contacts from the selected telephone to
store them in the audio system.
Bluetooth
Connection
Delete
Delete the selected telephone.
Confirm
Save the settings.
Telephone
connection
Telephone
connection
Secondary page
Telephone
Devices detected
Search
for devices
Telephone
connection
Secondary page
Telephone
Options
Audio streaming
Start the search for peripheral devices
Internet
Put on hold
Cut the microphone temporarily so that the contact
cannot hear your conversation with a passenger.
Update
Import the contacts from the selected telephone to
save then in the audio system.
Ringtones
Choose the telephone ringtone and
volume.
Memory info.
Contact records used and free, percentage of storage
space used by internal contacts and Bluetooth
contacts.
Confirm
Save the settings.
327
08 Bluetooth
Pairing a Bluetooth telephone
First connection
For reasons of safety and because they require prolonged attention
on the part of the driver, the operations for pairing the Bluetooth
mobile telephone to the hands-free system of the audio system must
be carried out with the vehicle stationary.
Procedure (short) from the telephone
Select Search.
The list of telephones detected is displayed.
In the Bluetooth menu of your device, select the
system name in the list of devices detected.
Enter a code of at least 4 figures in the device
and confirm.
Enter this same code in the system, select "OK"
and confirm.
If the telephone is not detected, it is recommended that you switch
the Bluetooth function on your telephone off and then on again.
Select the name of the desired peripheral from
the list and Confirm.
Enter a code of at least 4 figures for the
connection then "Confirm".
Procedure from the system
Activate the telephone's Bluetooth function
and ensure that it is "visible to all" (telephone
configuration).
Press on Telephone to display the primary
page then go to the secondary page.
Select "Bluetooth Connection".
328
Enter this same code in the telephone then
accept the connection.
The system offers to connect the telephone:
- in "Telephone" (hands-free kit, telephone only),
- in "Audio streaming" (streaming: wireless playing of audio files
from the telephone),
- in "Internet" (internet browsing, only if your telephone is
compatible with the "DUN" Dial-Up Networking Bluetooth
standard).
Select one or more profiles and Confirm.
08 Bluetooth
The services available depend on the network, the SIM card and the
compatibility of the Bluetooth telephone used. Check the telephone
manual and with your network provider for details of the services
available to you.
The ability of the system to connect with only one profile depends on
the telephone. The two profiles may both connect by default.
Visit www.peugeot.co.uk for more information (compatibility,
additional help, ...).
The telephone is added to the list.
Depending on your telephone, you may be asked to accept
automatic connection every time the ignition is switched on.
Depending on the type of telephone, the system
will ask you to accept or not the transfer of your
contacts.
If not, select "Update".
On return to the vehicle, the last telephone connected automatically
reconnects, within around 30 seconds after switching on the ignition
(Bluetooth activated).
To modify the automatic connection mode, select the telephone in
the list then select the desired profile.
Connecting a Bluetooth peripheral
Automatic reconnection
On switching on the ignition, the telephone connected when the
ignition was last switched off is automatically reconnected, if this
connection mode had been activated during the pairing procedure.
The connection is confirmed by the display of a
message and the name of the telephone.
Manual connection
Press on Telephone to display the primary
page then go to the secondary page.
Select "Bluetooth" to display the list of paired
peripherals.
Select the peripheral to connect.
Press on "Search".
The connection is confirmed by the display of a
message and the name of the telephone.
329
08 Bluetooth
Managing paired telephones
This function allows the connection or disconnection of a peripheral
device as well as the deletion of a pairing.
Press on Telephone to display the primary
page then go to the secondary page.
Receiving a call
An incoming call is announced by a ring and a superimposed display
in the screen.
Make a short press on the steering mounted TEL
button to accept an incoming call.
Select "Bluetooth" to display the list of paired
peripheral devices.
Select the peripheral in the list.
Select:
-"Search" or "Disconnect" to connect or
disconnect the Bluetooth connection with
the peripheral selected.
-"Delete" to remove the pairing.
330
Make a long press on the steering mounted TEL
button to reject the call.
or
Select "End call".
08 Contacts
Making a call
Use of the telephone is not recommended while driving.
We recommended that you park safely or make use of the
steering mounted controls.
Calling a new number
Calling a contact
Press on Telephone to display the primary
page.
Press on Telephone to display the primary
page.
Enter the phone number using the keypad
then "Call" to start the call.
Or make a long press on the steering
mounted TEL button.
Select "Contacts".
Select the desired contact from the list offered.
Select "Call".
331
08 Call log
Ending a call
Calling a recently used number
Press on Telephone to display the primary
page.
Select "Call log".
Select the desired contact from the list offered.
It is always possible to make a call directly from the telephone; park
the vehicle first as a safety measure.
332
Select "End call".
or
Make a long press on the steering
mounted TEL button.
08 Settings
Ringtones
Press on Telephone to display the primary
page then go to the secondary page.
Managing contacts / Entries
Press on Telephone to display the primary
page.
Select "Contacts".
Select "Telephone Options".
Select "Add contact".
Select "Ringtones".
You can select the ringtone used and adjust its volume.
Select "Confirm".
Select:
-"New" to add a new contact.
-"Modify" to edit the selected contact.
-"Delete" to delete the selected contact.
-"Delete all" to delete all of the information
for the selected contact.
Select "Directory information" for the number
of entries used, available, ...
333
Frequently asked questions
The following table groups together the answers to the most frequently asked questions concerning your audio system.
QUESTION
ANSWER
SOLUTION
Navigation, guidance
The route calculation is
not successful.
The guidance criteria may conflict with the current location (exclusion of
toll roads on a toll motorway).
I am unable to enter my
post code.
The system only accepts post codes of up to 5 characters.
The POIs do not appear.
The POIs have not been selected.
Select the POIs in the list of POIs.
The risk areas audible
warning does not work.
The audible warning is not active.
Activate audible warnings in the Guidance options
menu, "Navigation - guidance", "Set parameters
for risk areas".
The system does not
suggest a detour around
an incident on the route.
The guidance criteria do not take account of TMC messages.
Select the "Traffic info" function in the list of
guidance criteria.
I receive a Risk area alert
which is not on my route.
Other than guidance, the system announces all Risk areas positioned in a
cone located in front of the vehicle. It may provide an alert for a Risk area
located on nearby or parallel roads.
Zoom in on the map to view the exact position of
the Risk area. Select "On the route" to no longer
receive alerts other than guidance or to reduce the
time for the announcement.
334
Check the guidance criteria on the Navigation
Menu, "Guidance options"\ "Define calculation
criteria".
Frequently asked questions
QUESTION
Certain traffic jams
along the route are not
indicated in real time.
The altitude is not
displayed.
ANSWER
SOLUTION
On starting, it is several minutes before the system begins to receive the
traffic information.
Wait until the traffic information is being received
correctly (display of the traffic information icons on
the map).
The filters are too restrictive.
Modify the "Geographic filter" settings.
In certain countries, only major routes (motorways...) are listed for the
traffic information.
This phenomenon is normal. The system is
dependent on the traffic information available.
On starting, the initialisation of the GPS may take up to 3 minutes to
receive more than 4 satellites correctly.
Wait until the system has started up completely.
Check that there is a GPS coverage of at least
4 satellites (long press on the SETUP button, then
select "GPS coverage").
Depending on the geographical environment (tunnel...) or the weather,
the conditions of reception of the GPS signal may vary.
This phenomenon is normal. The system
is dependent on the GPS signal reception
conditions.
Telephone, Bluetooth
I cannot connect my
Bluetooth telephone.
The telephone's Bluetooth function may be switched off or the telephone
may not be visible.
-
-
The volume of the
telephone connected
in Bluetooth mode is
inaudible.
Check that your telephone's Bluetooth
function is switched on.
Check in the telephone settings that it is
"visible to all".
The Bluetooth telephone is not compatible with the system.
You can check the compatibility of your telephone
at www.peugeot.co.uk (services).
The volume depends both on the system and on the telephone.
Increase the volume of the audio system, to
maximum if required, and increase the volume of
the telephone if necessary.
The ambient noise level has an influence on the quality of telephone
communication.
Reduce the ambient noise level (close the windows,
reduce the booster fan speed, slow down, ...).
335
Frequently asked questions
QUESTION
ANSWER
SOLUTION
Some contacts are
duplicated in the list.
The options for synchronizing contacts are synchronizing the contacts
on the SIM card, the contacts on the telephone, or both. When both
synchronizations are selected, some contacts may be duplicated.
Select "Display SIM card contacts" or "Display
telephone contacts".
Contacts are not shown
in alphabetical order.
Some telephones offer display options. Depending on the settings
chosen, contacts can be transferred in a specific order.
Modify the display setting in the telephone
directory.
The system does not receive
SMS text messages.
The Bluetooth mode does not permit sending SMS text messages to the
system.
CD, MP3
The CD is ejected
automatically or is not
played by the player.
The CD is inserted upside down, is unplayable, does not contain any
audio data or contains an audio format which the player cannot play.
The CD has been recorded in a format that is not compatible with the
player (udf, ...).
The CD is protected by an anti-pirating protection system which is not
recognised by the audio system.
Check that the CD is inserted in the player the right
way up.
- Check the condition of the CD: the CD cannot be
played if it is too damaged.
- Check the content in the case of a recorded CD:
refer to the advice in the "AUDIO" section.
-The audio system's CD player does not play DVDs.
- Some recorded CDs will not be played by the audio
system because they are not of the correct quality.
-
There is a long waiting
period following the insertion
of a CD or connection of a
USB memory stick.
When a new medium is inserted, the system reads a certain amount of
data (directory, title, artist, etc.). This may take from a few seconds to a
few minutes.
This phenomenon is normal.
The CD player sound is
poor.
The CD used is scratched or of poor quality.
Insert good quality CDs and store them in suitable
conditions.
The audio equipment settings (bass, treble, ambiences) are unsuitable.
Set the treble or bass level to 0, without selecting
an ambience.
336
Frequently asked questions
QUESTION
ANSWER
SOLUTION
Some characters in the
media information are not
displayed correctly while
playing.
The audio system does not display some types of characters.
Use standard characters to name tracks and
folders.
Playing of streaming files
does not start.
The peripheral device connected does not support automatic play.
Start the playback from the device.
The names of tracks and
the track length are not
displayed on the screen
when streaming audio.
The Bluetooth profile does not allow the transfer of this information.
Radio
The quality of reception
of the radio station
listened to gradually
deteriorates or the stored
stations do not function
(no sound, 87.5 Mhz is
displayed...).
I cannot find some radio
stations in the list of
stations received.
The name of the radio
station changes.
The vehicle is too far from the transmitter used by the station listened
to or there is no transmitter in the geographical area through which the
vehicle is travelling.
Activate the "RDS" function by means of the
short-cut menu to enable the system to check
whether there is a more powerful transmitter in the
geographical area.
The environment (hills, buildings, tunnels, basement car parks...) block
reception, including in RDS mode.
This phenomenon is normal and does not indicate
a fault with the audio system.
The aerial is absent or has been damaged (for example when going
through a car wash or into an underground car park).
Have the aerial checked by a PEUGEOT dealer.
The station is not received or its name has changed in the list.
Some radio stations send other information in place of their name
(the title of the song for example).
The system interprets this information as the name of the station.
337
Frequently asked questions
QUESTION
ANSWER
SOLUTION
Settings, configuration
In changing the setting
of treble and bass the
equalizer setting is
deselected.
The selection of an equalizer setting imposes the balance settings.
Modifying one without the other is not possible.
Modify the balance or equalizer settings to obtain
the desired musical ambience.
The selection of a distribution setting imposes the balance settings.
Modifying one without the other is not possible.
Modify the balance or distribution settings to
obtain the desired musical ambience.
For optimum sound quality, the audio settings for Volume, Bass, Treble,
Equalizer and Loudness can be adapted to the different sound sources,
which may result in audible differences when changing source (radio,
CD...).
Check that the audio settings for (Volume, Bass,
Treble, Equalizer, Loudness) are adapted to
the sources listened to. It is advisable to set the
AUDIO functions (Bass, Treble, Fr-Re balance,
Le-Ri balance) to the middle position, select the
"None", musical ambience and set the loudness
correction to the "Active" position in CD mode or
to the "Inactive" position in radio mode.
In changing the equalizer
setting, treble and bass
return to zero.
When changing the
balance settings, the
distribution setting is
deselected.
When changing an
distribution setting,
the balance setting is
deselected.
There is a difference in
sound quality between
the different audio
sources (radio, CD...).
338
Frequently asked questions
QUESTION
ANSWER
With the engine off, the
system switches off after
a few minutes of use.
When the engine is switched off, the system's operating time depends on
the battery charge.
The switch-off is normal: the system switches to economy mode and
switches off to prevent discharging of the vehicle's battery.
SOLUTION
Start the vehicle's engine to increase the battery
charge.
USB, portable player, connection key
Playback of my USB
memory stick starts only
after a very long wait
(around 2 to 3 minutes).
Some files supplied with the memory stick may greatly slow down access
to reading the memory stick (multiplication by 10 of the catalogue time).
Delete the files supplied with the memory stick
and limit the number of sub-folders in the file
structure on the memory stick.
When I connect my
iPhone as telephone and
to the USB port at the
same time, I am unable
to play the music files.
When the iPhone connects automatically as a telephone, it forces the
streaming function. The streaming function takes the place of the USB
function which is then not useable, there is a period without sound of the
track being played with Apple® players.
Disconnect and reconnect to the USB port
(the USB function takes priority over streaming).
339
340
Audio system
CONTENTS
The system is coded in such a way that it will only
operate in your vehicle.
For safety reasons, the driver must only carry out
operations which require prolonged attention while the
vehicle is stationary.
When the engine is switched off and to prevent
discharging of the battery, the audio system may switch
off after a few minutes.
01 First steps
p.
342
02 Steering mounted controls
p.
343
03 Main menu
p.
344
04Audio
p.
345
05 Audio settings
p.
355
06 Screen menu map
p.
356
Frequently asked questions
p.
357
341
508_en_Chap11d_RD5_ed02-2014
01 First steps
Select screen display
between modes:
Full screen: Audio
In a window: Audio - Time or
Trip computer.
Long press: black screen
(DARK).
Select source:
Radio, CD, AUX, USB.
TA (Traffic
Announcement)
function On / Off.
Long press: access to
type of information.
Display the list of stations received, CD/MP3 tracks or
folders.
Long press: manage the classification of MP3/WMA files /
update the list of stations received.
Access to main menu.
Abandon the current
operation.
Up one level.
On / Off.
Volume.
Confirmation or display of
contextual menu.
Selection of AM / FM
wavebands.
Manual step by step search up / down for radio frequencies.
Select previous / next MP3 folder.
Select previous / next folder / genre / artist / playlist in the
USB device.
Navigation in a list.
342
Select preset radio
station.
Long press: preset
(store) a station.
Automatic search up / down
for radio frequencies.
Select previous / next CD,
USB track.
Navigation in a list.
Audio settings:
audio ambiences,
treble, bass, loudness,
distribution, left/right
balance, front/rear fader,
automatic volume.
02 Steering mounted controls
-
-
-
-
-
Press: access to the instrument
panel screen menu.
Rotation: navigation in the
instrument panel screen menu.
-Rotation:
Radio: search for previous / next
station.
Media: previous / next track.
Press: confirmation.
Increase volume.
-
Change the audio source.
-
Select the type of permanent
display on the screen between
window and full screen modes.
Long press: black screen (DARK).
Mute / restore sound.
Decrease volume.
-
-
Radio: display the list of stations.
Media: display the list of tracks.
Long press: update the list of
stations received.
343
03 Main menu
"Multimedia": Media parameters,
Radio parameters.
> Screen C
For a detailed global view of the menus
available, refer to the "Screen menu map"
section.
344
04 Audio
Radio
Selecting a station
The exterior environment (hills, buildings, tunnel, car park, below
ground...) may prevent reception, even in RDS station tracking
mode. This phenomenon is normal in the propagation of radio
waves and is in no way indicative of a fault with the audio system.
Press LIST to display the list of stations
received in alphabetical order.
Select the desired radio station and
confirm by pressing OK.
Press SOURCE or SRC several times in
succession and select radio.
A press changes to the next or previous
letter (e.g. A, B, D, F, G, J, K, ...).
Press BAND to select a waveband.
A long press on LIST builds or updates
the list of stations; audio reception is cut
momentarily.
345
04 Audio
RDS
Receiving TA messages
RDS, if displayed, enables you to continue listening to the same
station by automatic retuning to alternative frequencies. However,
in certain conditions, coverage of an RDS station may not be
assured throughout the country as radio stations do not cover
100 % of the territory. This explains the loss of reception of the
station during a journey.
The TA (Traffic Announcement) function gives priority to TA alert
messages. To operate, this function needs good reception of a
radio station transmitting this type of message. When a traffic
report is transmitted, the current audio source (Radio, CD,
USB, ...) is interrupted automatically to play the TA message.
Normal playback of the audio source resumes at the end of the
transmission of the message.
When the radio is displayed on the
screen, press OK to display the
contextual menu.
Select "RDS" and confirm to save.
"RDS" is displayed in the screen.
346
Press TA INFO to activate or deactivate
the reception of traffic messages.
04 Audio
Receiving INFO messages
Display RADIO TEXT
The INFO function gives priority to TA alert messages. To be
active, this function needs good reception of a radio station that
transmits this type of message. When a message is transmitted,
the current audio source (Radio, CD, USB, ...) is interrupted
automatically to receive the INFO message. Normal play resumes
at the end of the message transmission.
Radio text is information transmitted by the radio station related
to the current programme or song.
Screen C
Make a long press on TA INFO to
display the list of categories.
With the radio displayed on the screen,
press OK to display the contextual
menu.
Select or deselect categories to activate
or deactivate the reception of the
corresponding messages.
Select "RadioText (TXT) display" and
confirm OK to save.
347
04 Audio
Audio CD
Playing a CD
Insert 12 cm diameter circular compact discs only.
Some anti-pirating systems, on original discs or CDs copied using a
personal recorder, may cause faults which are no reflection on the
quality of the original player.
Without pressing the EJECT button, insert a CD in the player, play
begins automatically.
Press LIST to display the list of tracks
on the CD.
Press and hold one of the buttons for
fast forward or backward.
To play a disc which has already been
inserted, press the SOURCE or SRC
button several times in succession and
select "CD".
Press one of the buttons to select a
track on the CD.
348
04 Audio
CD, USB
Information and advice
The audio system will only play files with extension ".mp3" or ".wma"
and a compression rate that is constant or variable between 32 Kbps
and 320 Kbps.
It is advisable to restrict file names to 20 characters without using
special characters (e.g. " ? ; ù) to avoid any playing or displaying
problems.
The playlists accepted are types .m3u and .pls.
The number of files is limited to 5 000 in 500 directories on a
maximum of 8 levels.
On a single disc, the CD player can read up to 255 MP3 files spread
over 8 directory levels. However, it is recommended that this be kept
to 2 levels so as to limit the time taken to access and play the CD.
During play, the folder structure is not observed.
In order to be able to play a recorded CDR or CDRW, when recording
it is preferable to select standards ISO 9660 level 1.2 or Joliet.
If the disc is recorded in another format, it may not be played correctly.
It is recommended that the same recording standard is always used
for an individual disc, with as low a speed as possible (4x maximum)
for optimum sound quality.
In the particular case of a multi-session CD, the Joliet standard is
recommended.
Do not connect a hard disk or USB device other than audio players to
the USB port. This may cause damage to your installation.
349
04 Audio
CD, USB
Playing a compilation
Press one of the buttons to select the
next or previous track.
Insert an MP3 compilation in the CD player or
connect a memory stick to the USB port, directly or
via an extension lead.
The system creates playlists (temporary memory) the creation time
for which can take from a few seconds to several minutes.
The playlists are updated every time the ignition is switched off or a
USB memory stick is connected.
Play starts automatically after a period which depends on the
capacity of the USB memory stick.
At a first connection, the order suggested is by folder.
When connecting again, the order previously chosen is
retained.
To play a disc or memory stick which
has already been inserted, press
SOURCE or SRC several times in
succession and select "CD" or "USB".
350
Press one of the buttons to select the
next or previous folder in the order
chosen.
Press and hold one of the buttons for
fast forwards or backwards.
Press LIST to display the menu of
folders in the compilation.
04 Audio
USB memory stick - File sorting
Select a line in the list.
Make a long press on LIST or press
MENU, select "Multimedia", then "Media
parameters" and finally "Choice of track
listing" to display the different types of
sorting.
Select a track or a folder.
Up a level in the menu.
Skip a track.
Having selected the desired sorting
("By folders", "By artists", "By genres",
"By playlists") press OK.
Then confirm OK to save the modifications.
- By folders: all folders containing audio
files recognised on the peripheral device,
in alphabetical order without following the
folder structure.
- By artists: all of the artist names defined
in the ID3 Tags, in alphabetical order.
- By genres: all of the genres defined in the
ID3 Tags.
- By playlists: if playlists have been saved.
351
04 Audio
APPLE® players or portable player
The audio files on a Mass Storage portable player* can
be heard through the vehicle's speakers by connecting
it to the USB port (cable not supplied).
Management of the device is via the audio system controls.
The playlists are those defined in the Apple® player.
If the portable player is not recognised by the USB port,
connect it to the auxiliary Jack socket.
The Apple® player must be generation 5 or later.
* Check your player's manual.
352
The Apple® player must be updated regularly for the best
connection.
04 Audio
Auxiliary socket (AUX)
Auxiliary Jack socket
The auxiliary Jack socket permits the connection of a portable
non-mass storage device or an Apple® player if not recognised
by the USB port.
Do not connect a device to the USB port and to the auxiliary
Jack socket at the same time.
Connect the portable device to the auxiliary Jack socket using
a suitable cable (not supplied).
Press the SOURCE or SRC button
several times in succession and
select "AUX".
First adjust the volume on your portable device.
Then adjust the volume of the audio
system.
The display and management of controls is on the
portable device.
353
04 Audio
Play mode
The play modes available are:
- Normal: the tracks are played in order, depending on the
classification of the selected files.
- Random: the tracks in an album or folder are played in a random
order.
- Random all: all of the tracks saved in the media are played in
random order.
- Repeat: the tracks played are only those from the current album
or folder.
Press OK for access to the contextual
menu.
or
Press MENU.
Select "Multimedia" and confirm.
Select "Media parameters" and
confirm.
Select "Read mode" and confirm.
Select the desired play mode and
confirm OK to save the modifications.
354
05 Audio settings
Screen C
The distribution (or spatialisation using the Arkamys© system), is
an audio process which allows the sound quality to be improved
according to the setting chosen, corresponding to the position of the
listeners in the vehicle.
The Ambience, Treble and Bass audio settings are different and
independent for each sound source.
Press ¯ to display the audio settings
menu.
The settings available are:
-Ambience,
-Bass,
-Treble,
-Loudness,
- Distribution: Personalised or Driver,
- Left / right balance,
- Fader (front / rear balance),
- Auto. volume.
On-board audio: Arkamys© Sound Staging.
With Sound Staging, the driver and passengers are immersed in an
"audio scene" recreating the natural atmosphere of an auditorium:
truly a part of the scene and its surroundings.
This new sensation is made possible by software in the audio
system which processes the digital signals from the media players
(radio, CD, MP3…) without changing the audio settings. This
processing takes account of the characteristics of the passenger
compartment to produce optimum results.
The Arkamys© software installed in your audio system processes
the digital signal from the media players (radio, CD, MP3, ...) and
recreates a natural musical scene, with harmonious placement of
instruments and voices in the space in front of passengers, level
with the windscreen.
Select and confirm "Other settings…"
to display the next setting in the list.
355
06 Screen menu map(s)
Screen C
MAIN FUNCTION
Option A
1
Option A1
2
3
1
MULTIMEDIA
Option A11
Media parameters
1
2
Option B...
3
3
3
3
2
3
3
3
3
1
356
PERSONALISATION CONFIGURATION
Choice of playback mode
Normal
Random
Random all
Repeat
Choice of track listing
By folders
By artists
By genres
By playlists
Radio parameters
1
Choice of language
1
Display configuration
2
2
2
2
Choice of units
Date and time adjustment
Display parameters
Brightness
Frequently asked questions
The following tables contain answers to the most frequently asked questions.
QUESTION
ANSWER
SOLUTION
There is a difference in
sound quality between
the different audio
sources (radio, CD...).
For optimum sound quality, the audio settings (Volume, Bass, Treble,
Ambience, Loudness) can be adapted to the different sound sources,
which may result in audible differences when changing source (radio,
CD...).
Check that the audio settings (Volume, Bass,
Treble, Ambience, Loudness) are adapted to
the sources listened to. It is advisable to set
the AUDIO functions (Bass, Treble, Front-Rear
Fader, Left-Right Balance) to the middle position,
select the musical ambience "None" and set the
loudness correction to the "Active" position in CD
mode or to the "Inactive" position in radio mode.
When changing the
settings for treble and
bass, the ambience
setting is deselected.
When changing the
ambience setting, treble
and bass are reset to
zero.
Choosing an ambience imposes settings for treble and bass. Modifying
one without the other is not possible.
Modify the treble and bass settings or the
ambience setting to obtain the desired sound
quality.
When changing the
balance setting,
distribution is deselected.
Choosing a distribution setting imposes a balance setting. Modifying one
without the other is not possible.
Modify the balance setting or the distribution
setting to obtain the desired sound quality.
357
Frequently asked questions
QUESTION
The quality of reception
of the radio station
listened to gradually
deteriorates or the stored
stations do not function
(no sound, 87.5 MHz is
displayed...).
ANSWER
SOLUTION
The vehicle is too far from the transmitter used by the station listened
to or there is no transmitter in the geographical area through which the
vehicle is travelling.
Activate the RDS function to enable the system
to check whether there is a more powerful
transmitter in the geographical area.
The environment (hills, buildings, tunnels, basement car parks...) block
reception, including in RDS mode.
This phenomenon is normal and does not indicate
a failure of the audio equipment.
The aerial is absent or has been damaged (for example when going
through a car wash or into an underground car park).
Have the aerial checked by a PEUGEOT dealer.
Sound cut-outs of 1 to
2 seconds in radio mode.
During this brief sound cut-out, the RDS searches for any frequency
permitting better reception of the station.
Deactivate the RDS function if the phenomenon is
too frequent and always on the same route.
The traffic announcement
(TA) is displayed. I do
not receive any traffic
information.
The radio station does not broadcast traffic information.
Tune to a radio station which broadcasts traffic
information.
The stored stations are
not found (no sound,
87.5 MHz is displayed...).
An incorrect waveband is selected.
Press the BAND button to return to the waveband
on which the stations are stored.
358
Frequently asked questions
QUESTION
ANSWER
SOLUTION
The CD is ejected
automatically or is not
played by the player.
The CD is inserted upside down, is unplayable, does not contain any
audio data or contains an audio format which the player cannot play.
The CD is protected by an anti-pirating protection system which is not
recognised by the audio equipment.
-
The CD player sound is
poor.
The CD used is scratched or of poor quality.
Insert good quality CDs and store them in suitable
conditions.
The audio settings (bass, treble, ambience) are unsuitable.
Set the treble or bass level to 0, without selecting
an ambience.
The message "USB
peripheral error"
or "Peripheral not
recognised" is displayed
in the screen.
The USB memory stick is not recognised.
The memory stick may be corrupt.
Reformat the memory stick (FAT 32).
The Apple® player is
not recognised when
connecting to the USB
port.
The Apple® player is of a generation that is not compatible with the USB.
Connect the Apple® player to the AUX Jack socket
using a suitable cable (not supplied).
Check that the CD is inserted in the player the
right way up.
- Check the condition of the CD: the CD cannot
be played if it is too damaged.
- Check the content in the case of a recorded
CD: consult the advice in the "Audio" section.
-The audio equipment's CD player does not
play DVDs.
- Due to their quality level, certain writeable
CDs will not be played by the audio system.
359
Frequently asked questions
QUESTION
ANSWER
SOLUTION
The hard disk or device
is not recognised when
connecting to the USB
port.
Some hard disks and devices need a power supply greater than is
provided by the audio system.
In "Random all" play,
not all of the tracks are
played.
In "Random all" play, the system can only take into account up to 999
tracks.
With the engine off, the
audio system switches
off after a few minutes
of use.
When the engine is switched off, the audio system operating time
depends on the battery charge.
The switch-off is normal: the audio system switches to economy mode
and switches off to prevent discharging the vehicle's battery.
Start the vehicle's engine to increase the battery
charge.
The message "the audio
system is overheated"
appears on the display.
In order to protect the installation if the surrounding temperature is too
high, the audio system switches to an automatic thermal protection mode
leading to a reduction of the volume or stopping of the playing of the CD.
Switch the audio system off for a few minutes to
allow the system to cool.
360
Connect the device to the 230 V socket, the 12 V
socket or an external power supply.
Caution: ensure that the device does not transmit
a voltage greater than 5 V (risk of destruction of
the system).
Visual search
Exterior
Saloon
Remote control key / electronic
key - opening / closing
- anti-theft protection
-starting
-battery
Wipers149-152
Changing a wiper blade
152, 220
41-51
Sunroof60-61
Roof bars
225
Accessories227-228
44, 56, 59
Boot
- opening / closing
- emergency release
Temporary puncture repair kit 186-191
Changing bulbs
- rear lamps
- 3rd brake lamp
- number plate lamps
Door mirrors
Blind spot monitoring
203, 206
Parking sensors
134-136
Towbar223-224
Towing221-222
Welcome lighting
145
Door mirror spotlamps
145
Additional headlamps
147
148
Secondary additional headlamps
Headlamp height adjustment
146
Changing front bulbs
200-202
Tyre under-inflation detection
174-175
ESC: ABS-EBFD, EBA, ASR,
DSC176-178
Changing a wheel
192-198
-tools
- removing / refitting
199
Snow chains
Tyre pressures
264
73-74
126-128
Doors42-51
- Keyless Entry and Starting
- opening / closing
- central locking
- emergency control
Alarm52-53
Electric windows
54-55
Fuel tank, misfuel prevention
63-65
.
361
Visual search
Exterior
SW
Remote control key / electronic key 41-51
- opening / closing
- anti-theft protection
-starting
-battery
Wipers149-152
Changing a wiper blade
152, 220
Sunroof60-61
Panoramic sunroof
62
Roof bars
225
Accessories227-228
44, 56, 59
Boot
- opening / closing
- emergency control
57-58
Motorised tailgate
Temporary puncture repair kit 186-191
Changing bulbs
- rear lamps
-3rd brake lamp
- number plate lamp
362
Door mirrors
Blind spot monitoring
204-206
Parking sensors
134-136
Towbar223-224
Towing221-222
145
Welcome lighting
145
Door mirror spotlamps
147
Additional headlamps
148
Additional secondary headlamps
146
Headlamp adjustment
200-202
Changing front bulbs
Under-inflation detection
174-175
ESC: ABS-EBFD, EBA, ASR,
DSC176-178
Changing a wheel
192-198
-tools
- removing / refitting
Snow chains
199
Tyre pressures
264
73-74
126-128
Doors42-51
- Keyless Entry and Starting
- opening / closing
- central locking
- emergency control
Alarm52-53
Wipers54-55
Fuel tank, misfuel prevention
63-65
Visual search
Interior
Boot fittings (Saloon)
- rings, hooks, straps
- storage box
- boxes, storage
- boot lamp
-floor
Boot fittings (SW)
- rings hooks
- boot lamp
-floor
- 12 V accessory socket
-storage
Luggage cover (SW)
High load net (SW)
Warning triangle
AdBlue ® additive tank
Rear seats
ISOFIX child seats
79
80
Front seats
-manual
-electric
- welcome function
- head restraints
-heated
-massage
66-70
Mats77
Airbags182-185
81
82-83
173
242-249
76
Interior fittings
Deactivating the passenger's front
airbag
158, 183
71-72
164-168, 169
Seat belts
Rear armrest
Ski flap
179-181
77
78
Conventional child seats
Electric child lock
155-163, 169
170
.
363
Visual search
Instruments and controls
Electric parking brake
103-108
Dashboard fuses
207-208
Opening the bonnet
Door mirrors
Electric windows, deactivating
5/6-speed manual gearbox
Gear shift indicator
Automatic gearbox
Electronic gearbox
Stop & Start
Hill start assist
Manual parking brake
Peugeot Connect USB Courtesy lamps
153
Seat belt / passenger's front airbag
warning lamps display
180, 183
Rear view mirror
75
Sunroof60-61
62
SW panoramic sunroof
269-340
40
Audio system
Setting the date/time
341-360
39
Fuses behind the glove box
207, 209
230
73-74
54-55
110
111
112-115
116-119
120-122
123, 107
Heating, ventilation
84-86
87-88
Manual air conditioning
89-91
Dual-zone air conditioning
Quad-zone front air conditioning 92-94
97
Demisting / defrosting
109
78
Quad-zone rear air conditioning
364
Touch screen Setting the date/time
95-96
Visual search
Instruments and controls (cont.)
Head-up display
124-125
Instrument panels, screens
12, 27-29
- check / service indicator /
trip distance recorder
- lighting dimmer
14-25
Warning lamps
Indicators26-30
Gear shift indicator
111
Touch screen
Screen C
35-38, 40, 269-340
39, 341-360
Hazard warning lamps
171
Ignition switch, switching on/off 100-102
120-122
Stop & Start
Electric parking brake
103-108
Wiper controls
Trip computer
149-152
31-34
Switch panels, buttons
Programmable heating
Memorising speeds
Speed limiter
Cruise control
129
130-131
132-133
Headlamp height adjustment
7
98-99
146
Steering wheel adjustment
75
Horn172
Lighting controls
Direction indicators, parking
138-145
142, 171
.
365
Visual search
Maintenance - Technical data
Checking levels
237-239
-oil
- brake fluid
- power steering fluid
-coolant
- screenwash/headlamp wash fluid
- fuel additive (Diesel)
242-249
AdBlue ® additive
Checking components
240-241
- 12 V battery
- air filter
- passenger compartment filter
- oil filter
- particle filter (Diesel)
-gearbox
- brake pads / discs
- parking brake
- electric parking brake
Changing bulbs
-front
-rear
Running out of fuel (Diesel)
Petrol weights
Diesel weights
252-253
258-261
200-206
Identification markings
264
Dimensions262-263
Opening the bonnet
Under the bonnet, petrol
Under the bonnet, Diesel
Petrol engines
Diesel engines
366
231
12V battery
211-214
Removing/refitting the 12V
battery215-218
Load reduction, economy mode
219
Engine compartment fuses
207, 210
230
232-233
234-236
250-251
254-257
Alphabetical index
A
Accessories...................................................227
Accessory socket, 12 volt................................76
Adaptive lighting.............................................144
AdBlue ®.............................................. 22, 27, 242
Adjusting headlamps.....................................146
Adjusting head restraints...........................66, 69
Adjusting seat belt height..............................180
Adjusting the steering wheel...........................75
Airbags.....................................................25, 182
Airbags, curtain......................................184, 185
Airbags, front.........................................182, 185
Airbags, lateral.......................................184, 185
Air conditioning..........................................10, 88
Air conditioning, dual-zone................. 85, 86, 89
Air conditioning, manual..................................87
Air conditioning, quad-zone.............................92
Air filter...........................................................240
Air flow.............................................................10
Air vents...........................................................84
Alarm................................................................52
Anti-theft........................................................102
Armrest.............................................................76
Armrest, rear....................................................77
Assistance call...............................172, 265, 266
Audible warning............................................. 172
Audio cable.............78, 286, 289, 290, 352, 353
Audio streaming
(Bluetooth).......................................... 286, 289
Audio system..................................................341
Automatic illumination
of headlamps.......................................139, 143
Automatic operation of hazard
warning lamps............................................. 171
Automatic rain sensitive
windscreen wipers............................... 149, 151
Auxiliary socket............... 78, 286, 290, 352, 353
B
Battery.............................................211-218, 240
Battery, charging............................................ 214
Battery, remote control.............................. 49-51
Blind.................................................................60
Blind spot sensors.........................................126
Blue HDi................................................. 231, 242
Bluetooth (hands-free)...................................328
Bluetooth (telephone).....................................328
Boot............................................................ 56-58
Boot (opening)..................................................44
Brake discs..................................................... 241
Brake lamps.......................................... 203, 204
Brake pads..................................................... 241
Braking system warning lamp..........................20
C
Capacity, fuel tank...........................................63
CD......................................................... 286, 348
CD MP3......................................... 286, 349, 350
Central locking.................................... 45, 46, 48
Changing a bulb..................................... 200-206
Changing a fuse......................................207-210
Changing a wheel...................................185-192
Changing a wiper blade.........................152, 220
Changing the date......................................39, 40
Changing the remote control battery...............50
Changing the time......................................39, 40
Checking levels.......................................237-239
Checking the engine oil level...........................30
Checking tyre pressures
(using the kit)...............................................191
Checks................................................... 232-248
Children................................... 157-170, 181, 183
Child lock ....................................................... 170
Child seats ............................................ 155-169
Child seats, conventional........................161-163
Child seats, ISOFIX .............................. 164-168
Closing the boot...............................................56
Closing the doors.......................................45, 48
Cold climate screen.......................................226
Colour screen.........................................270, 271
Connectors, audio........... 78, 286, 290, 351, 353
Coolant level............................................26, 239
Coolant temperature indicator.........................26
Cornering lamps............................................ 147
Courtesy lamps..............................................153
Cruise control.........................................129, 132
Cup holder........................................................76
D
DAB (Digital Audio Broadcasting)........ 284, 285
Date (setting)..............................................39, 40
Daytime running lamps.................. 141, 200-202
Deactivating ESP........................................... 178
Deactivating the passenger airbag................183
Deadlocking.....................................................47
Defrosting, front...............................................97
Defrosting, rear................................................97
Demisting, rear.................................................97
Demisting, front................................................97
Diesel...............................................................16
Diesel additive level.......................................239
Diesel engine pre-heat warning lamp.............16
Digital Audio Broadcasting
(DAB).................................................. 284, 285
Dimensions....................................................262
Dipped beam................................. 138, 200, 202
Dipstick.....................................................30, 237
Direction
indicators.....................171, 200, 201, 203, 204
Driving economically.......................................10
Driving positions
(memorising)..................................................68
Dynamic stability control (DSC)............... 21, 176
.
367
Alphabetical index
E
Eco-driving ......................................................10
Economy mode..............................................219
Electronic engine immobiliser................. 51, 102
Electronic stability control (ESC)................... 176
Emergency boot release..................................59
Emergency call..............................172, 265, 266
Emergency starting........................................ 212
Emergency starting
and switching off..........................................102
Emergency warning lamps.................... 171, 173
Emissions control system, SCR......................23
Energy economy mode..................................219
Engine compartment............................. 232-236
Engine compartment fusebox........................210
Engine, Diesel..........65, 231, 234-236, 254, 258
Engine oil.......................................................237
Engine oil level indicator..........................30, 237
Engine, petrol.................. 65, 232, 233, 250, 252
Engines................................................. 250, 254
Environment...............................................10, 50
Equipment settings..........................................13
ESC/ASR........................................................ 176
F
Filling with fuel...........................................63, 65
Fitting a wheel................................................197
Fitting roof bars..............................................225
Fittings, boot..............................................79, 80
Flashing indicators................................. 142, 171
Foglamps, front..............................140, 148, 200
Foglamps, rear.............................. 140, 203, 204
Folding the rear seats...................................... 71
Folding/unfolding the door mirrors..................73
Frequency (radio)...................................281, 345
Front seats................................................. 66-68
Fuel............................................................10, 65
368
Fuel consumption.............................................10
Fuel filler cap....................................................63
Fuel filler flap....................................................63
Fuel gauge.................................................12, 63
Fuel tank..........................................................63
Fusebox, dashboard......................................208
Fuses..............................................................207
G
Gearbox, automatic......... 10, 112, 123, 214, 241
Gearbox,
electronic............... 10, 116, 120, 123, 214, 241
Gearbox, manual...... 10, 110, 111, 120, 123, 241
Gear lever, automatic gearbox...................... 112
Gear lever, manual gearbox.......................... 110
Gear lever,
electronic gearbox....................................... 116
Gear shift indicator........................................ 111
Ground clearance..........................................263
Guide-me-home.....................................142, 143
H
Halogen headlamps.............................. 200, 202
Hands-free kit........................................328, 329
Hazard warning lamps........................... 171, 173
Headlamp adjustment....................................146
Headlamp wash.............................................150
Headlamp wash reservoir..............................239
Head restraints, front.................................66, 69
Head restraints, rear........................................ 71
Head-up display............................. 124, 130, 132
Heated seats..............................................66, 69
Heating...............................85, 87, 89, 92, 95, 98
Height and reach adjustment,
steering wheel...............................................75
High load retaining net.....................................82
Hill start assist................................................123
I
Identification plates........................................264
Indicators, direction...............171, 200, 203, 204
Inflating accessories
(using the kit)...............................................191
Inflating tyres...........................................10, 264
Inputs
for audio system........... 78, 286, 290, 352, 353
Instrument panel..............................................12
Instrument panel screen.......................... 13, 111
Intelligent Traction Control.............................177
Interior fittings..................................................76
Interior mood lighting.....................................154
ISOFIX mountings.........................................164
J
Jack................................................................192
Jack cable....................... 78, 286, 290, 352, 353
JACK socket.................... 78, 286, 290, 352, 353
JBL (audio system)....................................6, 267
Jukebox (playing)...........................................291
Alphabetical index
K
Keeping children safe.............155-170, 181, 183
Key..............................................................41-51
Key, electronic...................................... 41-46, 49
Keyless Entry and
Starting..................................... 42-47, 101, 102
Key with remote control.................................102
L
Labels, identification......................................264
Lamps, warning and indicator................... 14-25
LEDs - light-emitting diodes.................. 200-206
Level, AdBlue ® additive..................................242
Level, brake fluid............................................238
Level, headlamp wash........................... 151, 239
Level, power steering fluid.............................238
Levels and checks................................. 232-239
Light-emitting diodes - LEDs........ 200, 203, 204
Lighting bulbs
(replacement)....................................... 200-206
Lighting control stalk..............................138, 142
Lighting, guide-me home.......................142, 143
Lighting, interior.....................................153, 154
Lighting on reminder...................................... 141
Loading....................................................10, 225
Load reduction mode.....................................219
Load space cover.............................................81
Locating your vehicle.......................................48
Long objects, transporting...............................78
Long fuel level............................................21, 64
Luggage retaining strap...................................79
M
Main beam.................................... 138, 200, 202
Maintenance....................................................10
Map reading lamps........................................153
Markings, identification..................................264
Massage function ............................................70
Mat...................................................................77
Menu..................................... 274, 276, 278, 292,
294, 296, 312, 324, 326
Menu, main....................................................344
Menus (Touch screen)...................................270
Mirror, rear view...............................................75
Mirrors, door...................................... 73, 74, 126
Motorised boot........................................... 57, 58
Mountings for ISOFIX seats..........................164
MP3 CD......................................... 286, 349, 350
N
Navigation......................................................298
Number plate lamps.......................................206
O
Oil change......................................................237
Oil consumption.............................................237
Oil filter...........................................................240
Oil level....................................................30, 237
Opening the boot.................................41, 44, 56
Opening the doors........................................... 41
Opening the panoramic sunroof blind.............62
Operation indicator lamps......................... 14-25
P
Paint colour code...........................................264
Panoramic glass sunroof.................................62
Parking brake......................................... 109, 241
Parking brake, electric.....................20, 103, 241
Parking lamps................................................142
Parking sensors, front....................................135
Parking sensors, rear....................................134
Particle filter...........................................239, 240
Passenger compartment filter.......................240
PEUGEOT CONNECT APPS........................323
Peugeot Connect Assistance....................266
Peugeot Connect SOS..............................266
Player, CD MP3............................. 286, 349, 350
Port, USB........................ 78, 286, 290, 350, 351
Priming the fuel system.................................231
Programmable heating (Webasto)..................98
Protecting children..................155-170, 181, 183
Puncture.........................................................186
R
Radio..................................................... 280, 345
RDS....................................................... 283, 346
Rear foglamp................................ 140, 203, 204
Rear screen (demisting)...................................97
Recharging the battery.................................. 214
Reduction of electrical load...........................219
Regeneration of the particle
filter..............................................................240
Reinitialising the remote control................49, 50
Remote control............................................41-51
Removable screen (snow shield)..................226
Removing a wheel.........................................195
Removing the battery.................................... 215
Removing the mat............................................77
Repair kit, puncture........................................186
Replacing bulbs..................................... 200-206
.
369
Alphabetical index
Replacing fuses......................................207-210
Replacing the air filter....................................240
Replacing the oil filter....................................240
Replacing the passenger
compartment filter.......................................240
Replacing wiper blades.........................152, 220
Resetting the service indicator........................29
Reversing camera.......................................... 137
Reversing lamp..................................... 203, 204
Risk areas (update)........................................301
Roof bars........................................................225
Roof blind.........................................................62
Routine checks......................................240, 241
Running out of fuel (Diesel)...........................231
S
Screen, instrument panel........................... 13, 31
Screen menu.........................274, 276, 278, 292,
294, 296, 312, 324, 326
Screen, monochrome........................... 344, 356
Screen, multifunction
(with audio equipment)................................344
Screenwash fluid level........................... 151, 239
Screenwash, front..........................................150
Screen-wash reservoir..................................239
SCR (Selective Catalytic Reduction).............242
Seat adjustment.........................................66, 67
Seat belts................................................179-181
Seats, rear........................................................ 71
Serial number, vehicle...................................264
Service indicator..............................................28
Servicing..........................................................10
Setting the clock........................................39, 40
Sidelamps...................... 138, 142, 200, 202-204
370
Side repeater.................................................202
Ski flap.............................................................78
Snow chains...................................................199
Spare wheel............................................192-194
Speed limiter..........................................129, 130
Spotlamps, side.....................................145, 202
Starting the engine................................ 100-102
Starting the vehicle........................ 100, 112, 116
Starting using another battery....................... 212
Steering mounted controls,
audio................................................... 273, 343
Stopping the vehicle...................... 100, 112, 116
Stop & Start.............................34, 63, 90, 93, 97,
120, 211, 230, 240
Storage...........................................76, 77, 79, 80
Storage wells.............................................79, 80
Storing a speed..............................................129
Storing driving positions..................................68
Stowing rings.............................................79, 80
Sunroof.............................................................60
Switching off the engine........................ 100-102
Synchronising the remote
control......................................................49, 50
Synthesiser, voice.......................................... 311
System settings........................................13, 320
Temperature control
for heated seats.............................................69
Temperature, coolant.......................................26
Temporary puncture repair kit.......................186
Third brake lamp............................................206
Three flashes function
(direction indicators).................................... 171
TMC (Traffic info)...........................................306
Tools...............................................................192
Touch screen...............................35-38, 40, 269
Touch screen (Menus).............................36, 270
Towbar............................................................223
Towed loads...........................................252, 258
Towing another vehicle..................................222
Traction control (ASR)............................. 21, 176
Traffic information (TA)..........................307, 346
Traffic information (TMC)...................... 306, 307
Trailer.............................................................223
Trip computer............................................. 31-34
Tyre pressures...............................................264
Tyres.........................................................10, 264
Tyre under-inflation detection.......... 25, 174, 194
U
T
Table of weights.....................................252, 258
Tables of engines.................................. 250, 254
Tables of fuses...............................................207
Tank, AdBlue ® additive..........................242, 247
Technical data........................................ 250-264
Telephone......................................................328
Under-inflation (detection)............... 25, 174, 194
Unlocking................................................... 41, 42
Unlocking the boot...........................................44
Update risk areas...........................................301
Updating the date.......................................39, 40
Updating the time.......................................39, 40
UREA.............................................................242
USB................................................................286
USB
(Peugeot Connect)......78, 286, 290, 352, 353
Alphabetical index
V
Vehicle configuration.......................................13
Vehicle identification......................................264
Ventilation.................................................. 84-87
W
Warning lamps........................................... 14-25
Warning lamp,
SCR emissions control system.....................23
Warning triangle............................................. 173
Wash-wipe, rear.............................................150
Weights..................................................252, 258
Welcome function............................................68
Welcome lighting...........................................145
Wiper control stalk..................................149-151
Wiper, rear.....................................................150
Wipers...............................................17, 149, 151
.
371
For any work on your vehicle, use
a qualified workshop that has the
technical information, competence
and equipment required, which a
PEUGEOT dealer is able to provide.
Reproduction or translation of all or part of
this document is prohibited without written
authorisation from Automobiles PEUGEOT.
Automobiles PEUGEOT declares, by
application of the provisions of the European
regulation (Directive 2000/53) relating
to End of Life Vehicles, that it achieves
the objectives set by this regulation and
that recycled materials are used in the
manufacture of the products that it sells.
Anglais
Printed in the EU
04-14
Anglais
www.peugeot.com
AN. 14508.0041