Converters.TV 15001 User guide

User Guide
52" LCD HD TV
NS-LCD52HD-09
Insignia NS-LCD52HD-09
52” LCD HD TV
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Remote. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Setting up your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connecting your TV to a power outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting an outside antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting to an external signal source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Turning your TV on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting the TV signal source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting up the channel list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting a digital sub-channel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying status information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking the DTV signal strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding a channel label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Freezing the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing closed captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting parental controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the on-screen menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
On-screen menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
11
11
11
11
11
11
11
12
12
12
12
12
13
14
14
Maintaining. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Cleaning your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Appendix A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Attaching a wall mount bracket to your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Appendix B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Programming your remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Troubleshooting remote control programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Manufacturer’s codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
One-Year Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Introduction
Congratulations on your purchase of a high-quality Insignia product. Your NS-LCD52HD-09 represents the
state of the art in HD television design, and is designed for reliable and trouble-free performance.
www.insignia-products.com
3
Insignia NS-LCD52HD-09 52” LCD HD TV
f
CHILD SAFETY
It makes a difference how and where you use
your flat panel display
As you enjoy your new product, keep
these safety tips in mind
The issue
The home theater entertainment experience is a growing trend, and larger TVs are
popular purchases. However, TVs are not always supported on the proper stands or
installed according to the manufacturer’s recommendations. We and the consumer
electronics industry are committed to making home entertainment enjoyable and safe.
TVs that are inappropriately placed on dressers, bookcases, shelves, desks,
speakers, chests, or carts may fall over and cause injury.
Tune into safety
•
•
•
•
•
•
One size of TV stand does not fit all. Use only a TV
stand rated for the weight of your TV.
Carefully read and understand all enclosed
instructions for proper use of this product.
Don’t let children to climb on or play with
entertainment system furniture and TVs.
Don’t place TVs on furniture that can easily be used
as steps, such as a chest of drawers.
Remember that children can become excited while
watching a program, especially on a “larger-than-life”
TV. Make sure that you place or install the TV where it
cannot be pushed, pulled over, or knocked down.
Make sure that you route all cords and cables so that
they cannot be pulled or grabbed by curious children.
Wall mounting
If you decide to wall mount your TV, always:
•
One size of wall mount does not fit all. Use only a wall mount rated for the weight
of your TV and that has been recommended by this TV manufacturer, listed in this
manual, or otherwise listed by an independent laboratory (such as UL, CSA, or
ETL) as suitable for your TV.
•
Follow all instructions supplied by the TV and wall mount manufacturers.
•
If you have any doubts about your ability to safely wall mount your TV, get help
from a professional installer.
•
Make sure that the wall where you are mounting the TV is
appropriate. Some wall mounts are not designed to be
mounted to walls backed with steel studs or cinder blocks.
If you are unsure, ask a professional installer.
•
TVs can be heavy. At least two people are required for safe wall mount installation.
4
www.insignia-products.com
Insignia NS-LCD52HD-09 52” LCD HD TV
Safety information
a bed, sofa, rug, or other similar surface. Do not
place your TV near or over a radiator or heat
register. Do not place your TV in a built-in
installation, such as a bookcase or rack, unless
you provide correct ventilation or follow the
manufacturer’s instructions.
Heat
Warning
To reduce the risk of electric shock, do not remove the cover or
back. There are no user-serviceable parts inside. Refer
servicing to qualified service personnel.
To reduce the risk of fire or electric shock, do not expose your
TV to rain or moisture.
Make sure that your TV is located away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers)
that produce heat.
Grounding or polarization
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a
grounding prong. The wide blade or grounding
prong are provided for your safety. If the plug
does not fit, contact an electrician to replace the
obsolete outlet.
Caution
To prevent electric shock, match the wide blade on the power
cord plug to the wide slot on an electric outlet. If the plug does
not fit, consult a licensed electrician to replace the obsolete
outlet. Do not modify the power cord plug, or you will defeat
this safety feature.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within your TV. This label is located on the back
of your TV.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying your TV.
Warnings
Your TV contains tin-lead solder and a fluorescent lamp
containing a small amount of mercury. Disposal of these
materials may be regulated for environmental reasons. For
disposal or recycling information, contact your local authorities
or the Electronic Industries Alliance at www.eia.org.
Your TV should not be exposed to dripping or splashing, and
no objects filled with liquids, such as vases, should be placed
on the TV.
Read instructions
Read all of the safety and operating instructions
before you use your TV.
Retain instructions
Retain safety and operating instructions for
future reference.
Follow warnings and instructions
Power cord protection
Route power cords so that they are not likely to
be walked on or pinched by items placed on or
against them. Pay particular attention to cords at
plugs, convenience receptacles, and the point
where they exit from your TV.
Accessories
Use only attachments/accessories
recommended by Insignia.
Stand
Do not place your TV on an unstable
cart, stand, tripod, bracket, or table.
Your TV may fall, causing serious
personal injury and serious damage
to your TV. Use only with a cart,
stand, tripod, bracket, or table recommended by
the manufacturer, or sold with your TV. If you
mount your TV to the wall, follow the
manufacturer’s instructions and use a mounting
accessory recommended by the manufacturer.
Your TV and cart combination should be moved
with care. Quick stops, excessive force, and
uneven surfaces may cause your TV and cart
combination to overturn.
Lightning
Follow all warnings on your TV and in the
operating instructions. Follow all operating and
use instructions.
Water and moisture
Do not use your TV near water. For example, do
not use it near a bath tub, wash bowl, kitchen
sink, laundry tub, in a wet basement, or near a
swimming pool.
Cleaning
Unplug your TV before cleaning. Do not use
liquid or aerosol cleaners. Use only a soft,
lint-free cloth to clean the exterior of your TV.
Ventilation
For added protection for your TV’s receiver
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the power outlet and disconnect
the antenna or cable system. This helps prevent
damage to your TV from lightning and power line
surges.
Servicing
Do not attempt to service your TV yourself
because opening or removing covers may
expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
Replacement parts
Slots and openings in the cabinet and the back
or bottom are provided for ventilation, reliable
operation, and protection from overheating.
These openings must not be blocked or covered.
Do not block the openings by placing your TV on
When replacement parts are required, make
sure that the service technician uses
replacement parts specified by the manufacturer
that have the same characteristics as the
www.insignia-products.com
5
Insignia NS-LCD52HD-09 52” LCD HD TV
original part. Unauthorized substitutions may
result in fire, electric shock, personal injury, or
other hazards.
Overloading
Do not overload power outlets and extension
cords because this can result in a risk of fire or
electric shock.
Object and liquid entry
built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA No. 70,
provides information with respect to correct
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of the antenna-discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
Never push objects of any kind into your TV
through openings because objects may touch
dangerous voltage points or short out parts that
could result in a fire or electric shock. Never spill
liquid of any kind on your TV.
7
6
5
Damage requiring service
4
Unplug this TV from the power outlet and refer
servicing to qualified service personnel under
the following conditions:
• When the power supply cord or plug is
damaged or frayed.
• If liquid has been spilled or objects have
fallen into your TV.
• If your TV has been exposed to rain or water.
• If your TV does not operate normally by
following the operating instructions. Adjust
only those controls that are covered by the
operating instructions because incorrect
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore your TV to
its normal operation.
• If your TV has been dropped or damaged in
any way.
• When your TV exhibits a distinct change in
performance.
Safety check
After completing any service or repair to this TV,
ask the service technician to perform routine
safety checks to determine that your TV is in
correct operating condition.
Power source
3
1
1
Electric service equipment
2
Power service grounding electrode system
3
Ground clamps
4
Grounding conductors
5
Antenna discharge unit
6
Grounding clamp
7
Antenna lead-in wire
Note to CATV system installer
This reminder is provided to call the CATV
system installer’s attention to Article 820-40 of
the NEC that provides guidelines for correct
grounding and in particular, specifies that the
cable ground must be connected to the
grounding system of the building as close to the
point of cable entry as practical.
Mobile telephone warning
Operate your TV only from the type of power
source indicated on the marking label. If you are
not sure of the type of power supplied to your
home, consult your TV dealer or local power
company.
Screen protection
Your TV’s screen is made of glass. Do not drop
your TV or hit the glass screen. If the screen
breaks, be careful of broken glass.
Non-active pixels
The LCD panel contains almost 3 million thin film
transistors, which provide exceptionally sharp
video quality. Occasionally, a few non-active
pixels may appear on the screen as a fixed blue,
green, or red point. These non-active pixels do
not adversely affect the performance of your TV,
and are not considered defects.
Outdoor antenna grounding
To avoid interference with your TV picture and
sound, operating problems, or even damage,
keep your mobile telephone away from the TV.
End of life directives
Your new TV contains materials which can be
recycled and reused. At the end of your TV’s life,
specialized companies can dismantle the
discarded TV to concentrate the reusable
materials and to minimize the amount of
materials to be disposed of. Dispose of your old
TV according to local regulations.
Disconnect
An apparatus with CLASS I construction shall be
connected to an AC power outlet with a
protective earthing connection. Where the AC
plug or an appliance coupler is used as the
disconnect device, the disconnect device shall
remain readily operable.
If an outside antenna or cable system is
connected to your TV, make sure that the
antenna or cable system is grounded to provide
some protection against voltage surges and
6
2
www.insignia-products.com
Insignia NS-LCD52HD-09 52” LCD HD TV
Features
Remote
19
1
Accessories
Make sure that the following accessories are
provided in the packaging:
• Remote control and batteries (2-AA)
• AC power cord
• PC audio cable
• VGA cable
• User guide
• Quick Start Guide
2
20
3
21
22
23
24
25
4
5
6
7
8
Front
9
1
2
TV
VIDEO
COMP
HDMI
27 26
29 28
10
11
12
13
3
4
5
30
31
32
33
34
14
15
6
7
1
#
Button
Description
1
VOL +
Press to increase the volume. In Menu
mode, functions as the right arrow to go to
the next menu or increase a setting.
2
VOL –
Press to decrease the volume. In Menu
mode, functions as the left arrow to go to a
previous menu or decrease a setting.
16
17
18
35
36
#
Button
Description
3
CH
Press to go to the next higher channel. In
Menu mode, functions as the up arrow.
1
SET
Press to program your remote control to
control other devices.*
4
CH
Press to go to the next lower channel. In
Menu mode, functions as the down arrow.
2
DVD
5
MENU
Press to show the on-screen menu.
Press to control your DVD player. Your
remote control must be programmed
first.*
6
INPUT
Press to show the input source menu, then
use the arrow keys to cycle through the
available input sources. In Menu mode,
functions as the OK/ENTER key.
3
TV
Press to control your TV.
4
MENU
Press to open the on-screen menu.
7
POWER
Press the arrows to move down, up, left,
or right in the on-screen menu.
Press the OK/ENTER button to confirm
changes or to toggle options on and off in
the on-screen menu.
5
OK/ENTER
Press to turn on your TV or put it into
Standby mode.
6
GUIDE
Press to display the program guide for the
selected device if your device supports this
feature. This TV does not support program
guide.
7
(stop)
Press to stop playback on DVD, DVR, PVR,
or CD devices.*
8
(play)
Press to start playback on DVD, DVR, PVR,
or CD devices.*
9
10
(fast back) Press to fast backward on DVD, DVR, PVR,
or CD devices.*
/
back)
(skip
In DVD, DVR, PVR, or CD mode, press to
skip back to the previous title or track.*
11
RECALL
In TV mode, press to return to the previous
channel.
12
VOL + or –
Press to adjust the volume up or down.
www.insignia-products.com
7
Insignia NS-LCD52HD-09 52” LCD HD TV
#
Button
Description
13
[Number
buttons]
Press to enter channel numbers.
In the on-screen menu, press to enter your
parental control’s password.
14
INPUT
Press to cycle through the available input
sources on the active device.
15
FAV
Press to switch between the Favorite and
Normal modes.
16
SAP
Press to select one of the preset audio
mode in NTSC mode. You can select
MONO, STEREO, or SAP.
In ATSC mode, press to select the audio
language.
17
SLEEP
Press to set the sleep timer. For more
information, see “Setting the sleep timer”
on page 12.
18
AUDIO
Press to select the bass and treble
adjustment. Lets you adjust the bass and
treble without opening the on screen
menu.
19
POWER
Press to turn on your TV, or the active
device, or put it into Standby mode.
20
STB
21
AUX
Press to control your auxiliary device.*
22
INFO
Press to current channel and program
information.
23
EXIT
Press to close the on-screen menu.
24
TV, VIDEO,
TV: Press to select TV source.
COMP, and HDMI VIDEO: Press to toggle between S-Video
(color buttons)
and Composite source modes.
COMP: Press to select Component source
mode.
HDMI: Press to select HDMI mode.
25
Press to control your set top box.*
(record)
LIST/PVR
Press to list all the recorded programs in
PVR/STB.*
27
(fast
forward)
Press to fast forward on DVD, DVR, PVR,
or CD devices.*
In DVD, DVR, PVR, or CD mode, press to
skip forward to the next title or track.*
/
29
FREEZE
Press to freeze the video image. Press
again to unfreeze the image.
Note: Do not freeze the video image for
long periods of time. You may damage the
TV screen.
Press to change TV channels.
30
CH
31
MUTE
Press to mute the sound. Press again to
restore the sound.
32
—
Use with 0-9 number buttons and
OK/ENTER key to select digital channels.
33
CCD
Press to turn closed captions on and off.
For more information, see “Viewing closed
captions” on page 12.
34
P-LOCK
Press to activate or deactivate parental
control lock.
35
ZOOM
Press to select the display aspect ratio.
36
PICT
Press to select the brightness or contrast
adjustment. Lets you adjust the brightness
and contrast without opening the on
screen menu.
8
or
Using the remote control
To use the remote control:
• Point the remote control towards the remote
sensor on the front of your TV.
Notes
• Do not expose the remote control to shock or
liquids.
• Do not use the remote control in an area with
high humidity.
• Do not place the remote control in direct
sunlight.
• Do not place objects, such as furniture,
between the remote control and the remote
sensor.
• The remote control may not work if direct
sunlight or bright light shines on the remote
sensor. Either move your TV or change the
angle at which you use the remote control.
Setting up your TV
Installing remote control batteries
To install the remote control batteries:
1 Remove the battery cover.
In DVD, DVR, PVR, or CD mode, press to
begin recording.*
26
28
* For information on programming your remote
control to control other devices, see
“Programming your remote control” on
page 17.
2 Insert two AA batteries into the battery
compartment. Make sure that you match the
+ and – symbols on the batteries with the +
and – symbols in the battery compartment.
3 Replace the cover.
Caution
• Batteries (battery pack or batteries installed)
should not be exposed to excessive heat, such
as sunshine, heater registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
•
•
•
•
www.insignia-products.com
Do not mix batteries of different types.
Do not mix old and new batteries.
Remove batteries when the charge is depleted.
If the remote control is not going to be used for
an extended period of time, remove the
batteries.
Insignia NS-LCD52HD-09 52” LCD HD TV
Connecting your TV to a power outlet
Set the RF switch to the A position to watch
unscrambled channels controlled by your TV
remote control. Set the RF switch to the B
position to watch scrambled channels
controlled by the converter/descrambler
controls.
To connect your TV to a power outlet:
• Plug the power cord into a power outlet.
Notes
• Make sure that you use the correct type of
power. See the label on your TV.
• If you do not intend to use your TV for an
extended period of time, unplug the power cord
from the power outlet.
Two-set signal splitter
RF switch
A
B
Out
Connecting an outside antenna
Antenna cables come in two types: 75 ohm and
300 ohm.
In
TV
Cable converter/descrambler box
75 ohm cable
Connecting to an external signal source
300 ohm cable
•
•
If your antenna cable has a 75 ohm
connector, connect the cable to the coaxial
jack on the back of your TV.
If your antenna cable has a 300 ohm
connector, connect the cable to a
300-75 ohm adapter (not included), connect
the adapter to a 75 ohm cable, then connect
the other end of the 75 ohm connector to the
coaxial jack on the back of your TV.
Connecting cable TV
Your TV has a 75 ohm jack for connecting cable
TV.
Some cable TV providers scramble the signals
for “premium” (pay) channels. To view these
channels, you need a converter/descrambler
box.
If you do not have a converter/descrambler box,
you can connect your cable TV directly to your
TV. If you have a converter/descrambler box, you
can connect your cable TV using an RF switch
(not supplied). For more information about
connecting a converter/descrambler box, contact
your cable TV provider.
To connect cable TV without a
converter/descrambler box:
1 Connect one end of a 75 ohm cable to the
coaxial jack on the back of your TV.
2 Connect the other end of the cable to the
cable TV wall outlet.
To connect cable TV with a
converter/descrambler box:
• Use the following illustration to connect a
converter/descrambler box. (The RF switch
and the signal splitter are not provided.)
You can connect a DVD, VCD, VCR, or STB
using a variety of methods, including composite
cables, component cables, an S-Video cable, or
an HDMI cable. The S-Video cable does not
carry sound. If you use an S-Video cable, you
need to use audio cables to connect the audio
output.
Warning
Make sure that you turn off and unplug your TV
before connecting devices.
Note
For better video, use the S-Video jack if your
source has an S-Video connection. For best video,
use the HDMI jack if your source has an HDMI
connection.
To connect an external signal source:
1 For composite video—Plug the audio/video
cable into the AUDIO L, AUDIO R, and
VIDEO in jacks on the back of your TV.
- OR For S-Video—Plug in the audio cables as
described above, then plug one end of an
S-Video cable into the S-Video jack on the
back of your TV and the other end into the
S-Video jack on the external signal source.
- OR For component video—Plug the Y, Pb, and
Pr video cables and the Audio L and Audio R
cables into the component input jacks.
- OR For HDMI—Plug one end of an HDMI cable
into the back of the TV and the other end into
the external signal source.
2 Turn on your TV.
3 Turn on the external signal source.
4 Press the INPUT button repeatedly to select
the external signal source you want to watch.
www.insignia-products.com
9
Insignia NS-LCD52HD-09 52” LCD HD TV
For information on operating the external
signal source, refer to the user guide for that
device.
Connecting a computer
Warning
Make sure that you turn off and unplug your TV
before installing devices.
Note
Many newer computers have HDMI output.
TV
To connect a computer using VGA:
1 Plug a VGA cable from your computer into
the VGA jack on the back of your TV.
2 Plug an audio cable from your computer’s
audio out jack into the AUDIO jack on the
back of your TV.
3 Plug in and turn on your TV.
4 Press the INPUT button repeatedly to select
the VGA input source.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
SPDIF
When using an HDMI-DVI adapter to pass the
DVI signal to HDMI input, use the L/R connector
to the right side of HDMI1 as audio input.
VGA cable
Note
When the computer goes into standby mode, your
TV turns off. If your TV does not turn on when you
“wake” your computer, press the POWER button
on your TV or remote control.
Using your TV
Turning your TV on and off
3
Headphone jack
HDMI jack
S-Video and
composite
video input
Audio input
10
To turn your TV on and off:
1 Make sure that the power cord is connected
to your TV and a power outlet.
2 Press the
button to turn on your TV. The
power indicator LED turns blue.
3 Press the
button again to return your TV
to standby. The power indicator LED turns
red.
www.insignia-products.com
Insignia NS-LCD52HD-09 52” LCD HD TV
Selecting the TV signal source
To select the TV signal source:
• With the TV on, press the INPUT button on
either the TV or the remote to choose from:
• TV
• Composite rear (Video 1)
• Composite side (Video 2)
• S-Video rear (Video 3)
• S-Video side (Video 4)
• Component 1 (Video 5)
• Component 2 (Video 6)
• VGA (Video 7)
• HDMI1 (Video 8)
• HDMI2 (Video 9)
• HDMI3 (Video 10)
You can also press VIDEO to choose between
Composite rear, Composite side, S-Video rear,
and S-Video side (Video 1~4), press COMP to
choose between Component1 and Component2
(Video 5~6), or press HDMI to choose between
HDMI1, HDMI2, and HDMI3 (Video 8~10).
Note
HDMI, the HDMI logo, and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
Setting up the channel list
After you select your TV source, if you selected
antenna or cable you need to set up the channel
list. When you set up your channel list, your TV
searches for all available channels in your area
and stores a list of these channels. When you
press the CH
or
buttons, your TV skips
the channels that do not have a signal.
Automatically setting up channels
To automatically set up the channel list:
1 Press the MENU button. The Main on-screen
display menu opens with Setup highlighted.
Tuning Band
Setup
Auto Ch Search
Manual Channel Set
Audio
Feature
Changing channels
To change channels:
• Press CH
or
on the remote control to
go to the next lower or higher channel.
- OR Press the number buttons to directly select a
channel (for example, if you want channel 83,
press 8, then press 3).
- OR Press RECALL to go to the last viewed
channel.
Selecting a digital sub-channel
Most digital TV channels have more than one
channel. The main channel carries the signal for
the main TV program. The sub-channels carry
signals for additional or alternate programming,
such as a radio or news broadcast.
For example, if the main channel number is 8,
the sub-channel number might be 8-1, 8-2, or
8-3.
To select a sub-channel:
1 Press the number buttons for the main
channel (for example 8).
2 Press –, then press the sub-channel button
(for example 1).
Adjusting the volume
To adjust the volume:
• Press VOL – or VOL + to decrease or
increase the volume.
• Press MUTE to turn off the sound. Press
MUTE again to turn the sound back on.
Cable
DTV Signal
Add On Ch Search
Video
To add or delete channels:
1 Press MENU. The Main OSD (On-Screen
Display) menu opens with Setup highlighted.
2 Press to enter the sub-menu, then press
or
to highlight Manual Channel Set. The
Channel Setup Table opens.
3 Press
or
to select a channel, then
press OK/ENTER to toggle between
viewable and not viewable.
4 Press MENU or EXIT to close the menu.
Channel Labels
Menu Language
English
Auto Zoom
Off
Aspect Ratio
Normal
Favorite Channel Mode
Off
To Move
Enter
To Select
Exit
Displaying status information
To Exit
2 Press to enter the sub-menu, then press
or
to highlight Auto Ch Search.
3 Press OK/ENTER or to start the search.
Note
You can press the EXIT button to stop the search.
Manually adding or deleting channels from the
channel list
After you create a channel list using the Auto Ch
Search option, you can manually add or delete
channels from the channel list.
To display status information:
• Press INFO. Your TV displays status
information, such as the channel number or
signal source.
Checking the DTV signal strength
To check the DTV signal strength:
1 Press MENU. The Main OSD (On-Screen
Display) menu opens with Setup highlighted.
2 Press to enter the sub-menu, then press
or
to highlight DTV Signal. The DTV
Signal meter opens.
3 Press MENU or EXIT to close the menu.
www.insignia-products.com
11
Insignia NS-LCD52HD-09 52” LCD HD TV
Set up your Favorite Channel List
2 Press
or
repeatedly to highlight
Feature. The Feature menu opens.
To set up your Favorite channel list:
1 Press MENU. The Main OSD (On-Screen
Display) menu opens with Setup highlighted.
2 Press to enter the sub-menu, then press
or
to highlight Favorite Channel.
3 Press to activate Favorite Channel Mode.
With Favorite Channel Mode ON, "Manual
Channel Set" becomes "Favorite Channel
Set."
4 Press
or
to highlight Favorite Channel
Set.
5 Press to open the channel list.
6 Press OK/ENTER to set your Favorite
Channel.
7 Press EXIT to close the setting.
When Favorite Channel Mode is ON, pressing
CH
or
will only go through your Favorite
Channels.
Time Set
Setup
Sleep Timer
Off
Advanced Video Menu
Video
Password Set
Parental Control
Audio
Digital Captions
Service 1
Digital Closed Captions
Feature
To Move Enter To Select
Exit To Exit
3 Press to enter the sub-menu, then press
or
to highlight Time Set. The Time Set
menu opens.
Adding a channel label
To add a label to a channel:
1 Press MENU. The Main OSD (On-Screen
Display) menu opens with Setup highlighted.
2 Press to enter the sub-menu, then press
or
to highlight Channel Labels. The
Channel Label menu opens.
3 Press or to move the cursor to the
channel field or label field, then press
or
to select a channel while the cursor is in
the channel field, or press
or
to select
the character while the cursor is in the label
field.
4 Press OK/ENTER to return to the previous
menu.
Freezing the picture
You can freeze (still) the screen image.
Caution
To protect your TV, do not freeze the screen image
for long periods of time.
To freeze or unfreeze the picture:
• Press FREEZE.
Setting the clock
To set the clock:
1 Press MENU. The Main OSD (On-Screen
Display) menu opens with Setup highlighted.
4 Press
or
to move to the different fields,
then press or to change the settings.
5 Press MENU or EXIT to close the menu.
Setting the sleep timer
The sleep timer lets you select the amount of
time before your TV turns off automatically.
To set the sleep timer:
1 Press MENU. The Main OSD (On-Screen
Display) menu opens with Setup highlighted.
2 Press
or
repeatedly to highlight
Feature. The Feature menu opens.
3 Press to enter the sub-menu, then press
or
to highlight Sleep Timer.
4 Press or to select the amount of time
(Off, 5 min, 10 min, 15 min, 30 min, 45 min,
60 min, 90 min, 120 min, 180 min, or 240
min). To turn off the timer, select Off.
Note
You can also press the SLEEP button to set the
sleep timer.
Viewing closed captions
Note
To select or customize digital closed captions, use
the Digital Captions or Digital Closed Caption
sub-menus in the Feature menu.
To view closed captions:
• Press the CCD button repeatedly to select a
closed caption option. You can select:
• On
• Off
• On When Mute
12
www.insignia-products.com
Insignia NS-LCD52HD-09 52” LCD HD TV
Setting parental controls
Your TV has a V-chip that lets you control the
type of programs your children can watch.
Parental controls include two ratings: MPAA
(based on age) and TV Parental Guidelines
(based on content and age). A TV program may
have an MPAA or TV Parental Guidelines rating,
so you should set controls for both ratings.
Before you can select ratings, you need to set up
a parental controls password.
4 Press the number buttons to enter the
password. Press OK/ENTER to continue.
The Parental Control Menu opens.
For analog channels
Parental Control Menu
USA Parental Locks
Canadian Parental Locks
To set up a password:
1 Press MENU. The Main OSD (On-Screen
Display) menu opens with Setup highlighted.
2 Press
or
repeatedly to highlight
Feature. The Feature menu opens.
3 Press to enter the sub-menu, then press
or
to highlight Password Set.
4 Press the number buttons to enter the old
password. If you have not set a password,
enter 0000. Press OK/ENTER to continue.
Exit
To Exit
For digital channels
Parental Control Menu
USA Parental Locks
Canadian Parental Locks
Advanced Rating
To Move
5 Press the number buttons to enter a new
password. Press OK/ENTER to continue.
Enter To Select
To Move
Off
Enter To Select
Exit
To Exit
5 Press
or
to select USA Parental
Locks, Canadian Parental Locks, or
Advanced Rating (for digital channels only),
then press OK/ENTER. The Controls Menu
that you have selected opens.
USA Parental Locks
6 Press the number buttons to enter the new
password again, to confirm. Press
OK/ENTER to continue.
MPAA
ALL
NONE
Caution
Write down your password and save it for future
use.
Note
If you forget your password, enter 3448 for the old
password, then enter a new password. This
password always remains valid for resetting your
password.
Setting the Parental Control level
TV RATING
FV
L
S
V
D
NONE
G
TV-Y
PG
TV-Y7
PG-13
TV-G
R
TV-PG
NC-17
TV-14
X
TV-MA
To Move Enter To Select
Exit To Exit
6 Press , , , or
to move to a rating, then
press OK/ENTER to select the rating.
7 When you block a rating, that rating and all
higher ratings are blocked.
8 Press MENU or EXIT button to close the
menu.
American MPAA ratings
To set the Parental Control level:
1 Press MENU. The Main OSD (On-Screen
Display) menu opens with Setup highlighted.
2 Press
or
repeatedly to highlight
Feature. The Feature menu opens.
3 Press to enter the sub-menu, then press
or
to highlight Parental Control. The
Password screen opens.
Rating
Description
NONE
Not rated.
G
General audiences.
PG
Parental guidance suggested. Some
material may not be suitable for
children.
PG-13
Parental guidance strongly suggested.
Some material may not be suitable for
children under 13 years of age.
R
Restricted. Not suitable for children
under 17 years of age unless
accompanied by a parent or guardian.
NC-17
Not suitable for children under 17
years of age.
X
Adults only.
www.insignia-products.com
13
Insignia NS-LCD52HD-09 52” LCD HD TV
Canadian English Ratings
Rating
3 Press
Description
E
Exempt programming
C
Children
C8+
Children over 8 years old
G
General audience
PG
Parental guidance
14+
Over 14 years old
18+
Adult programming
Rating
Description
E
Exempt programming
G
General audience
Manual Channel Set
Video
Audio
Feature
Over 16 years old
18ans+
Over 18 years, only for adult viewing
All children.
Children over seven years of age.
TV-G
General audiences.
TV-PG
Parental guidance suggested.
TV-14
Parents strongly cautioned.
TV-MA
Mature audiences only.
On-screen
menu
Setup
(Options may vary
in different
modes)
TV Parental Guidelines ratings
TV-Y7
Some of the age-based TV Parental Guidelines
ratings also have content-based ratings.
Rating
Description
FV
Fantasy violence.
L
Adult language.
S
Sexual situations.
V
Violence.
D
Sexually suggestive dialog.
Off
Aspect Ratio
Normal
Favorite Channel Mode
Off
To Move
Enter
To Select
Exit
To Exit
On-screen menus
16ans+
TV-Y
English
Auto Zoom
4 Press OK/ENTER or to confirm an
adjustment or toggle a setting.
5 Press MENU or EXIT to close the on-screen
menu.
Over 8 years old
Not rated.
Channel Labels
Menu Language
Over 13 years old
NONE
Auto Ch Search
Add On Ch Search
13ans+
Description
Cable
DTV Signal
Setup
8ans+
Rating
to enter a sub-menu.
Tuning Band
Canadian French Ratings
Using the on-screen menu
Your TV has an on-screen menu that lets you
adjust TV settings, such as video and audio
settings.
To use the on-screen menu:
1 Press MENU. The Main OSD (On-Screen
Display) menu opens with Setup highlighted.
2 Press
or
repeatedly to select a menu
item.
14
or
www.insignia-products.com
Options
Tuning Band–Selects the TV antenna source
(Air or Cable).
DTV Signal–Displays the digital TV signal
strength. For more information, see “Checking
the DTV signal strength” on page 11.
Auto Ch Search–Automatically sets up a list of
the channels available in your area. For more
information, see “Automatically setting up
channels” on page 11.
Add On Ch Search–Lets you add new channels
without going through the entire list of
available channels.
Manual Channel Set–Lets you add or delete
channels from the channel list. For more
information, see “Manually adding or deleting
channels from the channel list” on page 11.
Channel Labels–Lets you add a label to a
channel. For more information, see “Adding a
channel label” on page 12.
Menu Language–Selects the language for the
on-screen menu. You can select English,
French, or Spanish.
Auto Zoom–Select On (default) or Off. When
Auto Zoom is On there is an “Auto” option
under “Aspect Ratio.” If you choose "Auto,"
your TV selects the proper aspect ratio
automatically. This feature is only available in
TV mode.
Aspect Ratio–Selects the screen aspect ratio:
Normal, Wide, Zoom, Cinema, or Auto (only
available in TV mode with Auto Zoom set to
On). You can also press the ZOOM button to
select the aspect ratio.
Favorite Channel mode–Lets you edit your
favorite channel list. Use the FAV button on the
remote to toggle this mode on or off.
Insignia NS-LCD52HD-09 52” LCD HD TV
On-screen
menu
On-screen
menu
Options
Video
(Options may vary
in different
modes.)
Contrast–Increases the picture level to adjust
the white areas of the picture. Decreases the
picture level to adjust the black areas of the
picture. (0~100)
Brightness–Increases the brightness to add
more light to dark areas of the picture.
Decreases the brightness to add more dark to
light areas of the picture. (0~100)
Sharpness–Increases the sharpness for a
cleaner and clearer image. Decreases the
sharpness for a smoother picture. (-50~50)
Color–Adjusts the overall color of the picture.
(0 ~ 100)
Tint–Increases the color level to add more
green to skin tones. Decreases the color level
to add more purple to skin tones. (R50~G50)
Backlight–Adjusts the backlight level (0~10).
Settings–Restores the settings to factory
default.
Audio
(Options may vary
in different
modes.)
Audio Language–Selects an alternate language
if the program has more than one language
available. Only available in ATSC TV mode.
Bass–Adjusts the low sounds (bass).
Treble–Adjusts the high sounds (treble).
Balance–Adjusts the right and left speaker
volumes.
Digital Audio Output–Selects the audio mode
for the digital audio optical jack.
• RAW: AC-3 in - AC-3 out/PCM in - PCM
out.
• PCM: AC-3 in - PCM out/PCM in - PCM
out.
TV Speaker–Turns the internal TV speaker On
(default) or Off. It will not affect the digital
audio output, the headphone output, and the
composite audio output.
Settings–Restores the settings to factory
default.
Feature
(Options may vary
in different
modes)
Options
Time Set–Sets the clock. For more
information, see “Setting the clock” on page
12.
Sleep Timer–Sets the sleep timer. For more
information, see “Setting the sleep timer” on
page 12.
Advanced Video Set–
• Noise Reduction–Select from Low,
Mid, High, and Off
• Color Temperature–Select from
Normal, Warm, and Cool
• 3D Y/C filter–Choose from On (default)
or Off
• Dynamic Contrast–Choose from On or
Off
• Setting–Restores the settings to factory
default
Password Set–Lets you set the password for
Parental Control options. The default password
is 0000. See “Setting parental controls” on
page 13.
Parental Control–Accesses V-chip controls.
For more information, see “Setting parental
controls” on page 13.
Digital Caption–Sets the digital caption type.
Choose from Service 1-6, Text 1-4, and CC 1-4.
Closed Caption Options–Customizes closed
captions for digital broadcasting systems. You
can adjust Size, Font, Text Color, Text Opacity,
Background Color, Background Opacity, Edge
Effect, and Edge Color.
Component Set–Only available in component
mode. Lets you set Horizontal Position
(0 ~ 100), Vertical Position (0 ~ 100), Clock
(0 ~ 100), and Phase (0 ~ 100). The Settings
option restores the settings to factory default.
VGA Set–Only available in VGA mode. Lets you
set Horizontal Position (0 ~ 100), Vertical
Position (0 ~ 100), Clock (0 ~ 100), and Phase
(0 ~ 100). You can also select Auto Adjust to
automatically adjust the settings. The Settings
option restores the settings to factory default.
Audio Only–Lets you turn off the picture. When
Audio Only is turned on, the screen is turned
off and only audio is available. This feature is
available only in TV mode.
Input Label–Lets you change the Input label
that displays on the screen. You can use
“Preset” to reset to the default setting.
Maintaining
•
•
Do not use your TV in areas that are too hot
or too cold, because the cabinet may warp or
the screen may malfunction.
• Storage temperatures are 32° to 122°F
(0° to 50°C).
• Working temperatures are 41° to 104°F
(5° to 40°C).
Do not place your TV in direct sunlight or
near a heat source.
Cleaning your TV
Clean the screen and cabinet with a soft,
lint-free cloth. If the screen or cabinet is
especially dirty, moisten a soft, lint-free cloth in a
weak detergent solution, squeeze the excess
www.insignia-products.com
15
Insignia NS-LCD52HD-09 52” LCD HD TV
moisture from the cloth, then wipe the screen or
cabinet with the cloth. Use a clean cloth to dry
the screen or cabinet.
Caution
Avoid the following, because it may cause damage
to your TV:
• Cleaning your TV with volatile substances,
such as insect sprays, solvents, and thinners.
• Leaving items made from rubber or PVC in
contact with your TV for long periods.
• Letting liquids drip into the cabinet
Troubleshooting
Warning
Do not try to repair your TV yourself. Refer all
service to a qualified service technician.
Symptom
No power
No picture
Good picture but
no sound
Possible solution
Snowy picture or
noise
• Make sure that the A/V and antenna
cables are connected correctly and
securely.
VGA picture is
not stable or
synchronized
• Make sure that you have selected the
correct VGA mode on your computer.
No output from
one of the
speakers
• Adjust the balance in the Sound menu.
Control buttons
do not work
• Unplug the power cord, wait a few
seconds, then plug the cord back in and
turn on your TV.
After images
appear
• Do not display a still image, such as a
logo, game, or computer image, for an
extended period of time. This can cause
a permanent after image to be burned
into the screen. This type of damage is
not covered by your warranty.
Picture has a few
bright or dark
dots
• A few bright or dark dots on an LCD
screen is normal. It does not affect the
operation of this TV.
Possible solution
• Make sure that the power cord is
correctly connected to your TV and a
power outlet.
• Unplug the power cord, wait 60 seconds,
then plug the cord back in and turn on
your TV.
• Make sure that the video cables are
connected securely to the back of your
TV.
• Adjust the contrast and brightness.
• Make sure that the correct video mode is
selected.
• Make sure that the incoming signal is
compatible.
• Make sure the antenna is connected
correctly.
• Check the closed caption settings. Some
TEXT modes can block the screen.
Appendix A
Attaching a wall mount bracket to your TV
To attach a wall mount bracket to your TV:
1 Remove the four M4 and two T4 screws
holding your TV to the stand.
2 Secure the wall mount bracket to the back of
your TV using six M6 screws, as indicated in
the illustration.
400mm
mm
400
• Increase the volume.
• Make sure that the sound is not muted.
• Make sure that the correct audio mode is
selected.
• Make sure that the TV Speaker option is
set to On in the Audio menu.
Good sound but
poor color
• Adjust the contrast, color, and brightness
settings.
Poor picture
• Make sure that the room is not too
bright. Light reflecting off the screen can
make the picture difficult to see.
• If an S-VHS camera or a camcorder is
connected while another connected
device is turned on, the picture may be
poor. Turn off one or more devices.
Horizontal dotted
line
• Your TV may be too close to another
electrical device, such as a hair dryer or
neon light. Turn off the device or move
your TV.
“Ghost” or
double image
• This may be caused by obstructions to
the antenna, such as high-rise buildings
or hills. Use of a highly directional
antenna may improve the picture quality.
Remote control
does not work
• Press the TV button.
• Replace the batteries. Make sure that the
+ and – symbols on the batteries align
with the + and – symbols in the battery
compartment.
• Clean the remote sensor on the front of
your TV.
• Bright or fluorescent lighting may
interfere with the remote control signal.
Turn off the light or move your TV.
16
Symptom
Attach wall
bracket
Attach
wall here
bracket
Remove
T4T4
screws
Remove
screws
200mm
mm
200
RemoveM4
M4screws
screws
Remove
Remove
Remove
standstand
This apparatus is intended to be supported by
UL Listed wall mount bracket.
www.insignia-products.com
Insignia NS-LCD52HD-09 52” LCD HD TV
Appendix B
Programming your remote control
To program your remote to control home theater
devices, follow these steps.
Before proceeding, find the codes for the
devices you want to program in “Manufacturer’s
codes” and write them down or highlight them.
To program your remote control:
1 Turn on the device (for example, a DVD
player) and, if needed, load media such as a
DVD.
2 Press the device key on the remote for the
device that you want to program (TV, DVD,
STB, or AUX).
3 Press and hold SET until the red LED blinks
twice, then release.
4 Enter the first five-digit code for the device
and brand that you wish to program. The LED
blinks once as each digit is entered. If the
code is valid, the LED blinks twice.
Note
If the LED does not blink twice, repeat steps 2 to 4
and try entering the code again.
5 Aim the remote at the device and press
(power). The device should turn off. If it does
not, repeat Steps 3–5, trying each code for
your brand until you find one that works. If
you cannot find a code that works, see
“Searching for your code” below.
6 Repeat Steps 1 to 5 for the other devices you
want to control. For future reference, write
down each working device code.
Searching for your code
If your device does not respond to the remote
control after trying all codes listed for your brand,
or if your brand is not listed, try searching for
your code.
To search for your code:
1 Turn on the device you want to control.
2 Press the desired device key (TV, DVD, STB,
or AUX) once.
3 Press and hold SET until the red LED blinks
twice, then release.
4 Enter 9 9 1. The LED blinks twice.
5 Press the device group number for your
device type (see table below).
• 0—Cable (cable converters, video
accessories, satellite receivers)
• 1—TV (TVs)
• 2—VCR (VCRs, DVD players)
• 3—Audio (audio amplifiers, audio
amps/tuners, CD players)
6 Aim the remote at the device and press
(power). The remote sends IR codes from its
library to the selected device, starting with
the most popular code first. If the device
responds, go to Step 8.
7 If the device does not respond, press CH
and the remote tests the next code for that
device type. Continue to press CH until the
device turns off.
Note
Press CH
to try the previous code.
8 Now that you have found the correct code,
press SET to save the code that worked for
your device. The LED blinks twice to indicate
that the code has been saved.
9 To search for other device codes, repeat
Steps 1 to 8.
Checking the codes
If you have set up the remote using the
procedure in “Searching for your code”, you may
need to find out which five-digit code is operating
your equipment.
To find out which code is assigned to your
TV (for example):
1 Press TV once.
2 Press and hold SET until the red LED blinks
twice, then release.
3 Enter 9 9 0. The LED blinks twice.
4 To view the code for the first digit, press 1.
Count the red LED blinks (for example, three
blinks = 3), then write down the number in the
appropriate code listing at the top of this
column.
Note
If the LED does not blink, the code digit is 0.
5 Repeat Step 4 for the four remaining digits,
using 2 for the second digit, 3 for the third
digit, 4 for the fourth digit, and 5 for the fifth
digit.
6 To check for other device codes, repeat Steps
1 through 5, substituting the device key for
the device you would like to check.
Using learning
This universal remote control includes a learning
feature (some models may not include this) so
you can add functions that are unique to your
home entertainment devices (such as VCR
Tracking Up or Down). However, there are some
considerations to keep in mind.
Precautions
• Your original remote controls must be in
working order for learning to work properly.
• Learned keys are mode-specific, so each one
can store a unique function for each mode.
• Do not use the following keys for learning:
Device Keys, SET, or Record (•).
• Learning capacity is approximately 42 to 75
keys, depending on the code being learned.
• Certain device functions are not learnable,
including multi-frequency types, some high
frequency functions, and other unusual
formats.
www.insignia-products.com
17
Insignia NS-LCD52HD-09 52” LCD HD TV
•
For optimum learning, avoid high levels of
ambient light such as natural sunlight or
energy-efficient fluorescent lights.
Note
Please have your original remote controls handy
before programming learning.
Programming a learned key
To program a learned key:
1 Place your Insignia remote control
head-to-head (about 2" apart) from your
original remote control (the one that came
with the device). Also, locate the key (on your
original remote control) that you want the
Insignia remote control to learn. Press the
mode key you wish to learn functions on.
2 Press and hold SET until the LED blinks
twice, then release.
3 Enter 9 7 5. The LED blinks twice.
Notes
If more than 10 seconds pass between key
presses, the remote exits programming.
If the LED displays one long flash instead, either
your batteries are low, or the Insignia remote
control has a memory fault. In either case, the
remote cannot learn a new key.
4 Press the key on the remote you wish to
program. The feedback LED stays lit for three
seconds, indicating that the remote is ready
to learn.
5 On the original remote, press and hold the
key to be learned. Continue holding the key
on the original remote until the Insignia’s LED
blinks twice.
Note
If the red LED displays one long blink, a learning
error has occurred. Try repeating this step again
until a successful capture occurs. If the function is
still not captured, press and hold SET to exit
programming and review the Precautions” above.
If needed, also see “Troubleshooting remote
control programming” on page 20. After reviewing,
start programming again at Step 1.
6 Repeat Steps 4 and 5 to program another
key. Once you have completed programming
all the keys you want, press and hold SET
until the LED blinks twice to save all data
learned.
Deleting a single learning key
This process returns the key to its original
programming for the mode you select. You can
also delete learned programming by teaching a
different function to the key (see “Programming a
Learned Key” above).
Notes
If more than 10 seconds pass between key
presses, the remote exits programming.
If the LED displays one long flash instead, either
your batteries are low, or the Insignia remote
control has a memory fault. In either case, the
remote cannot learn a new key.
To delete a single learned key:
1 Press the mode key that you wish to remove
the learned key from.
2 Press and hold SET until the LED blinks
twice, then release.
18
3 Enter 9 7 6. The LED blinks twice.
4 Press the key containing the learned function
to be deleted, twice. The LED blinks twice
and programming ends.
Deleting all learned keys in a specific mode
Notes
If more than 10 seconds pass between key
presses, the remote exits programming.
If the LED displays one long flash instead, either
your batteries are low, or the Insignia remote
control has a memory fault. In either case, the
remote cannot learn a new key.
To delete all learned keys in a specific mode:
1 Press and hold SET until the LED blinks
twice, then release.
2 Press 9 7 6. The LED blinks twice.
3 Press a mode key twice (for example, TV,
DVD, STB, or AUX) to clear all the learned
keys for that mode. The LED blinks twice and
programming ends.
Changing volume lock
The Insignia universal remote control comes
preset to allow independent volume control of
each selected device (global volume unlock).
However, you may change the volume lock
setting to global volume lock so that one device's
volume controls volume in all other modes. After
that, you can perform Individual volume unlock
on a selected device to set its volume control for
independent operation or global volume unlock
to remove all volume locking.
To lock volume control to one mode (global
volume lock):
1 Press and hold SET until the red LED blinks
twice, then release.
2 Enter 9 9 3, the LED blinks twice.
3 Press the mode key for the device you want
to control (for example, TV).
4 The LED blinks twice. Now when you press
VOL+, VOL-, or Mute, the selected device
controls the volume regardless of the current
mode.
To unlock all volume control (restoring global
unlock):
1 Press and hold SET until the red LED blinks
twice, then release.
2 Enter 9 9 3, the LED blinks twice.
3 Press VOL+. The LED blinks four times.
Volume is independently controlled for all
programmed devices.
To unlock a single device’s volume control:
1 Press the desired device mode key (TV, DVD,
STB, or AUX).
2 Press and hold SET until the red LED blinks
twice, then release.
3 Enter 9 9 3. The LED blinks twice.
4 Press VOL-. The red LED blinks four times.
Volume is independently controlled for the
selected devices.
www.insignia-products.com
Insignia NS-LCD52HD-09 52” LCD HD TV
Programming channel lock
Channel control can be locked so that the
Insignia remote controls a single device’s
channel-changing functions, regardless of
operating mode. This is often enabled by users
who watch all broadcast TV through one device
(for example, a cable set-top box). The affected
keys are 1 through 0, CH , CH , and
RECALL.
To lock all channel controls to one device:
1 Press the mode key that relates to the device
that you use for channel changing control.
2 Press and hold SET until the mode LED
blinks twice, then release.
3 Enter 9 7 3.The mode LED blinks twice.
4 Press CH once. The mode LED blinks
twice.
Now, regardless of what mode you select, the
channel keys will only change channels on
the assigned device.
To unlock channel locks:
1 Press and hold SET until the mode LED
blinks twice, then release.
2 Enter 9 7 3. The mode LED blinks twice.
3 Press CH once. The mode LED blinks four
times.
Now the channel functions will correlate to
the active mode (for example, press CH in
TV mode and the TV changes channel
accordingly).
Using keymover
Your Insignia universal remote control includes a
keymover feature that lets you map (or copy)
keys from one mode (such as source mode) to
another mode (such as destination mode) or to a
different key in the same mode.
Note
Do not use any of the Device Keys,
(power),
RECORD, or SET as a source or destination key.
To move keys in the same device mode:
1 Press the desired device key (TV, DVD, STB,
or AUX).
2 Press and hold SET until the LED blinks
twice, then release.
3 Press 9 9 4. The LED blinks twice.
4 Press the key you want to move.
5 Press the new key that should perform the
function. The LED blinks twice.
6 Repeat Steps 1-5 to move additional keys.
To move keys to a different device mode:
1 Press and hold SET until the LED blinks
twice, then release.
2 Press 9 9 4. The LED blinks twice.
3 Press the device key that contains the
function you want to move (for example,
DVD).
4 Press the key you want to move (such as
Play).
5 Press the device key that you want to move
the function to. (such as TV).
6 Press the key in the new mode that should
perform the function (for example, Play). The
LED blinks twice.
7 Repeat Steps 1-6 to move additional keys.
To restore all keymoved data in a specific
mode:
1 Press and hold SET until the LED blinks
twice, then release.
2 Press 9 9 4. The LED blinks twice.
3 Press the device key you wish to remove all
keymoved data from twice. The LED blinks
twice.
4 Repeat for each device you want to restore.
To restore original key function:
1 Press the device key for which you wish to
remove the keymoved data from a specific
key.
2 Press and hold SET until the LED blinks
twice, then release.
3 Enter 9 9 4. The LED blinks twice.
4 Press the key you wish to remove the
keymoved data from twice. The LED blinks
twice.
5 Repeat Steps 1-4 for additional keys you
wish to remove.
Programming macros
Your Insignia universal remote control includes
the ability to program any key (other than the
SET key) with a macro function. Each one can
be set up to perform a pre-programmed set of
sequential key presses with the press of a single
key. A macro can be used to control a home
theater operation, to set a favorite channel, or for
other functions you would like to control with one
key press. Each macro key can hold up to 15 key
presses, total.
Note
Programming a new macro over an existing one
erases the original macro.
To program a mode-independent macro:
1 Press and hold SET until the red LED blinks
twice, then release.
2 Press 9 9 5. The LED blinks twice.
3 Press the key you want to assign to a macro.
4 Enter the series of commands you want the
macro to execute (up to 15 commands).
5 Press and hold SET until the red LED blinks
twice, then release.
Now, when you press the preset macro key,
the remote sends the series of commands
you have entered, regardless of what mode
you are in. For example, you could program a
macro key to turn on both your TV and cable
box and select a particular channel.
6 To clear the macro, repeat Steps 1-5, but do
not enter a series of commands at Step 4.
www.insignia-products.com
19
Insignia NS-LCD52HD-09 52” LCD HD TV
To program a mode-dependent macro:
1 Press the device mode key (TV, DVD, STB,
or AUX).
2 Press and hold SET until the LED blinks
twice, then release.
3 Press 9 7 8. The LED blinks twice.
4 Press the key you wish to assign to a macro.
5 Enter the series of commands you want the
macro to execute (up to 15 commands).
6 Press and hold SET until the red LED blinks
twice, then release.
Now, when you press the macro key, the
remote sends the series of commands you
have entered, but only if you are in the mode
you selected in Step 1. For example, you
could program the macro key to turn on both
your TV and cable box and select a particular
channel, but only if you are in TV mode. If you
are in DVD mode, this key does not execute
the macro you set up in TV mode.
7 To clear the macro, repeat Steps 1-6, but do
not enter a series of commands at Step 5.
Troubleshooting remote control
programming
Problem: The LED does not blink when you
press a key.
Solution: Try pressing different keys. Replace
the batteries with two new AA batteries.
Problem: The LED blinks when you press a key,
but the device does not respond.
Solution: Make sure that the remote control is
aimed at your device and is not more than 40
feet away.
Problem: The LED blinks one long blink while in
SET mode.
Solution: An entry error has occurred (for
example, wrong key). Try entering the sequence
again.
Problem: The remote control does not control
devices or commands are not working properly.
Solution: Try all listed codes for the device.
Make sure the device operates with an infrared
remote control.
Problem: No volume on a device.
Solution: See “Changing volume lock” on page
18, and make sure that the volume is not locked
to a different mode already.
Problem: Channels do not change correctly
when directly entering digits to change channels.
Solution: If the original remote control required
you to press Enter to change channels, press
Enter on this remote after entering the channel
number.
20
www.insignia-products.com
Insignia NS-LCD52HD-09 52” LCD HD TV
Manufacturer’s codes
Setup Codes for Audio Receivers
ADC
Setup Codes for Audio Amplifiers
Adcom
30577, 31100
30531
Adcom
30616
Aiwa
31405, 30189, 30121, 31089, 31388, 31641
30244, 31512
Anthem
32220
Akai
Bose
30674
Alco
31390
Carver
30892
AMC
31077
Durabrand
31561
Amphion Media Works
31563
Elan
30647
AMW
31563
GE
30078
Anam
31609, 31074
Harman/Kardon
30892
Anthem
31185
JVC
30331
Apex Digital
31257, 31430, 31774
Left Coast
30892
Arcam
31189
Lenoxx
31561
Audiotronic
31189
Marantz
30892
Audiovox
31390
30702, 30820, 30840
McI ntosh
30251
B&K
Modulaire
30395
BK
30702
NEC
30264
Bose
31229, 30639, 31253, 31629, 31841, 31933
30189
Optimus
30395, 30823
Cairn
Philips
30892
Cambridge Soundworks
Pioneer
30823
Capetronic
30531
Polk Audio
30892
Carver
31189, 30189, 30121, 31089, 31289
RadioShack
30395
Coby
31389
RCA
30823
Curtis Mathes
30014
Realistic
30395
Daewoo
31250
Shure
30264
Denon
31360, 30121, 31104, 31142, 31306, 32857
31370
Sony
30689, 30815
Emerson
30531
Soundesign
30078
Fisher
31801
30463
Victor
30331
Garrard
Wards
30078
Grundig
30189
Yamaha
30354, 30133
Harman/Kardon
30110, 30189, 30891, 31289, 31304, 31306, 32241
Hitachi
31273, 31801
Setup Codes for Audio Accessories
iLive
32013
I nkel
30491
I nsignia
31030, 31077, 31893, 32169, 32175
Accurian
31106
I ntegra
30135, 30842, 31298, 31320, 31805
Altec Lansing
30607, 31056
iSymphony
32258
Apple
31115
JBL
30110, 31306
Creative
30872
JVC
31058, 30074, 31374, 31495, 31871, 32239
Kawasaki
31390
Kenwood
31313, 31570, 30077, 30186, 31027
K LH
31390, 31412, 31428
Koss
31366, 31497
DLO
31155
GPX
32113
Griffin
31891
iDeck
31106
iHome
32152
iLive
32113
Lexicon
31076
LG
31293, 32197
I merge
31491
iPort
31917
Linn
30189
K lipsch
31339
Liquid Video
31497
Marantz
31491
Magnavox
Memorex
32119
31189, 31269, 30189, 30391, 30531, 31089, 31266,
31514
Marantz
31189, 31269, 30189, 30891, 31089, 31289
Monitor Audio
31106
Motorola
31464
Omnifi
31605
Roku
31828
Sonance
31917
Yamaha
31809, 31810, 32021
McI ntosh
31289
Micromega
31189, 30189
www.insignia-products.com
21
Insignia NS-LCD52HD-09 52” LCD HD TV
Setup Codes for Audio Receivers (continued)
Setup Codes for Cable Converters
Mitsubishi
31393
A-Mark
00008, 00144
Musicmagic
31089
ABC
00237, 00003, 00008
Myr yad
31189
Accuphase
00003
Nakamichi
31313, 30097, 31555
Acorn
00237
Norcent
31389
Action
00237
00237
Nova
31389
Active
Onkyo
30135, 30842, 31298, 31320, 31531, 31805, 31905
ADB
02586
Optimus
31023, 30074, 30014, 30121, 30186, 30531, 31074
Americast
00899
Oritron
31366, 31497
Amino
01602, 01822
Outlaw
30391
Archer
00237
Panasonic
31308, 31518, 30367, 31275, 31288, 31316, 31548,
31633, 31763, 31764
BCC
00276
Bell South
00899
Philips
31189, 31269, 30189, 30391, 30891, 31089, 31266
British Telecom
00003
Pioneer
31023, 30014, 30150, 30244, 30531, 30630, 31123,
31384, 31935
Centur y
00008
Polaroid
31508
Polk Audio
30189, 31289
Proscan
31254
RadioShack
31609
RCA
31023, 31609, 31254, 30531, 31074, 31123, 31390,
31511
Cisco
01877, 00877, 01982
Clearmaster
00883
ClearMax
00883
Cool Box
00883
Coolmax
00883
Digeo
01187, 02187
Realistic
31609, 30121, 30186
Director
00476
Revox
30189
Fosgate
00276
Rio
31869
GE
00144
Samsung
31295, 31304, 31500
General I nstrument
00476, 00810, 00276, 00003
Sangean
32165
Gibralter
00003
Sansui
31189, 30189, 31089
GMI
00883
Sanyo
31251, 31469, 31801
GoldStar
00144
Sharp
30186, 31286
Hamlin
00009, 00273
Sharper I mage
31556
Hitachi
00003, 00008, 00009
Sherwood
30491, 31077, 31653, 31905, 32169
Sherwood Newcastle
32169
Sonic Blue
31869
Sonic Frontiers
31185
Sony
31058, 31441, 31258, 31759, 31622, 30474, 31158,
31406, 31558, 31658, 31758, 31822, 31858
i3 Micro
01602
I nsight
00476, 00810
Jerrold
00476, 00810, 00276, 00003
Memorex
00000
Mitsubishi
00003
Motorola
01376, 00476, 00810, 00276, 01187, 01106, 01982
Stereophonics
31023
Multitech
00883
Sunfire
31313
Myrio
01602, 01822
00008
Teac
30463, 31074, 31390, 31528
Nova Vision
Technics
31308, 31518, 31633
Novaplex
00008
Thorens
31189
Pace
01877, 00877, 00237, 00008, 01982
Toshiba
30135, 30842, 31123, 31788
Panasonic
00000, 00008, 00144, 00107, 01982
Venturer
31390
Paragon
00000, 00008, 00525
Victor
30074
Penney
00000
Wards
30189, 30014
Philips
01305, 00317
XM
31406
Pioneer
01877, 00877, 00144, 00533
Yamaha
31023, 30176, 30186, 30376, 31176, 31276, 31331,
31375, 31376, 31476, 31815, 32061
Pulsar
00000
Quasar
00000
30857, 31293
RadioShack
00883
RCA
01256
Regal
00276, 00279, 00273
Zenith
22
Runco
00000
Samsung
00003, 00144, 01982
Scientific Atlanta
01877, 00877, 00477, 00237, 00003, 00000, 00008,
01982
Sejin
01602
Sony
01006
Sprucer
00144
Starcom
00003
Supercable
00276
Supermax
00883
Thomson
01256
Torx
00003
Toshiba
00000
Tristar
00883
United Cable
00276, 00003
US Electronics
00276, 00003, 00008
V2
00883
Videoway
00000
Viewmaster
00883
Vision
00883
Vortex View
00883
Zenith
00000, 00525, 00899
www.insignia-products.com
Insignia NS-LCD52HD-09 52” LCD HD TV
Setup Codes for Cable/PVR Combos
Setup Codes for CD Players (continued)
Americast
00899
Realistic
Amino
01822
Revox
30157
Cisco
01877, 01982
Roksan
30435
Digeo
01187, 02187
Rotel
30157, 30420
General I nstrument
00810
SAE
30157
Jerrold
00810
Sansui
30000, 30157
Motorola
01376, 00810, 01187, 01106, 01982
Sanyo
30000, 30087
30000, 30032, 30087, 30180, 30420
Myrio
01822
Sharp
30180
Pace
01877, 00237, 01982
Sherwood
30180
Pioneer
01877
Sonic Frontiers
30157
RCA
01256
Sony
30490, 30000, 30100, 31364, 30185
Scientific Atlanta
01877, 01982
Sugden
30157
Sony
01006
Sylvania
30157
Supercable
00276
Symphonic
30180
Thomson
01256
TAG McLaren
30157
Zenith
00899
Tandy
30032
Tascam
30393, 30420
Setup Codes for CD Players
Teac
30490, 30180, 30393, 30420
Technics
30029
Acoustic Research
30420
Thule Audio
30157
Aiwa
30157
Victor
30072
Arcam
30157
Wards
30032, 30157, 30053, 30087
Audio Research
30157
Yamaha
30490, 30036, 31292
Burmester
30420
Yorx
30000
Cairn
30157
California Audio Labs
30029
Cambridge Soundworks
30157
Setup Codes for DVD Players
Carver
30157
Curtis Mathes
30032
3D LAB
20503, 20539
Denon
30034
Accurian
20675, 21072, 21416
DKK
30000
Advent
21016
DMX Electronics
30157
Afreey
20698
Fisher
30000
Aiwa
20641
Garrard
30393, 30420
Akai
20695, 20705, 20770, 20899, 21089
Genexxa
30032
Alba
20672, 20717
Grundig
30157
Alco
20790
Hafler
30173
Allegro
20869
Harman/Kardon
30100, 30157, 30173
Hitachi
30032
I nkel
30157, 30180
I ntegra
30101
JVC
30032, 30072
Kenwood
30626, 30000, 30029, 30028, 30190
K LH
31318, 31711
Krell
30157
Linn
30157
Magnavox
30157, 30038, 30274
Marantz
30626, 30029, 30157, 30038, 30180, 30435
Matsui
30157
McI ntosh
30256, 30290, 30660
MCS
30029
Memorex
30000, 30032, 30420
Micromega
30157
Miro
30000
Mission
30157
Modulaire
30000, 30032, 30087, 30180, 30420
MTC
30420
Myr yad
30157
NSM
30157
Onkyo
31327, 30101
Optimus
30000, 30032, 30087, 30393, 30420
Panasonic
30029, 30388, 30752
Parasound
30420
Penney
30029
Philips
30626, 30157, 30274
Amphion Media Works
20872
AMW
20872
Apex Digital
20533, 20672, 20717, 20755, 20794, 20796, 20797,
20830, 21004, 21020, 21056, 21061, 21100
Arrgo
21023
Aspire Digital
21168, 21407
Astar
21489
Audiovox
20717, 20790, 21041, 21071, 21072, 21121, 21122
Axion
21071, 21072
B&K
20655, 20662
BBK
21224
Bel Canto Design
21571
Blaupunkt
20717
Blue Parade
20571
Blue Sky
20695
Bose
21895, 22023
Brandt
20651
Broksonic
20695, 20868
California Audio Labs
20490
Celestial
21020
Centrex
20672, 21004
Cinea
20831
CineVision
20876, 20833, 20869
Citizen
21003, 20695, 21277
Clairtone
20571
Coby
20778, 21077, 21086, 21107, 21177
Craig
20831
Creative
20503, 20539
Curtis Mathes
21087
CyberHome
20816, 20874, 21023, 21024, 21117, 21129, 21502,
21537
Pioneer
31062, 30032, 31087
Polk Audio
30157
Proceed
30420
Cytron
20705
Proton
30157
Daewoo
QED
30157
20784, 20705, 20770, 20833, 20869, 21169, 21172,
21234, 21242
Quad
30157
Dansai
20770
Quasar
30029
Daytek
20872
RadioShack
30000, 30032, 30180, 30420
Decca
20770
RCA
31062, 30032, 30053, 30420
Denon
20490, 20634, 22258
www.insignia-products.com
23
Insignia NS-LCD52HD-09 52” LCD HD TV
Setup Codes for DVD Players (continued)
Setup Codes for DVD Players (continued)
Denver
20778
Oritron
20651
Desay
21407
Palsonic
20672
DigitalMax
21738
Panasonic
Digitrex
20672
20503, 20490, 20571, 20632, 20703, 21362, 21462,
21490, 21641, 21762
Disney
20675, 21270
Philco
20675
DiViDo
20705
Philips
Dual
20675, 21068, 21085
20503, 20539, 20646, 20675, 20854, 21260, 21267,
21340, 21354, 22056, 22084
Durabrand
21127
DV D2000
20521
PianoDisc
21024
Pioneer
20525, 20571, 20142, 20631, 20632, 21460, 21512,
21571
Electrohome
21003
Polaroid
21020, 21061, 21086
Emerson
20591, 20675, 20821, 21268
Polk Audio
20539
Enterprise
20591
Portland
20770
Entivo
20503, 20539
Presidian
20675, 21072, 21738
Enzer
20770
Prima
21016
ESA
20821, 21268
Proceed
20672
Firstline
20651
Proscan
20522
Fisher
20670
ProVision
20778
Funai
20675, 21268, 21334
Qwestar
20651
Gateway
21073, 21077, 21158
Radionette
20741
GE
20522, 20815, 20717
RadioShack
20571
Go Video
20573, 20744, 20717, 20715, 20741, 20783, 20833,
20869, 21044, 21075, 21099, 21158, 21304, 21730
RCA
20522, 20571, 20717, 20790, 20822, 21022, 21132,
21769
20571
Go Vision
21071, 21072
Realistic
GoldStar
20741, 20869
Reoc
20752
Goodmans
20790
Rio
20869
Gradiente
20490, 20651
Rotel
20623, 21178
Greenhill
20717
Rowa
20823, 21004
Grundig
20539, 20705
Saba
20651
Harman/Kardon
20582, 20702
Sampo
20698, 20752
Hello Kitty
20831
Samsung
Hitachi
20573, 20664, 21247
20490, 20573, 20744, 20199, 20820, 20899, 21044,
21075
Hiteker
20672
Sansui
20695
Humax
21500, 21588
Sanyo
20670, 20675, 20695, 20873, 21334
iLo
21348
Schneider
20783
I nitial
20717
Schwaiger
20752
I nsignia
21268
Sensor y Science
21158
I ntegra
20571, 20627, 21769
Sharp
20630, 20675, 20752, 21256, 22250
I RT
20783
Sharper I mage
21117
JBL
20702
Sher wood
20770, 21043, 21077
21077
Jensen
21016
Sher wood Newcastle
JMB
20695
Shinsonic
20533, 20839
JVC
20558, 20623, 20867, 21164, 21275, 21550
Slim Art
20784
Kawasaki
20790
Sonic Blue
20573, 20715, 20783, 20869, 21099
Kenwood
20490, 20534
Sony
20533, 21533, 20864, 21033, 21070, 21431, 21516
K LH
20717, 20790, 21020, 21149
Sova
21122
K loss
20533
Superscan
20821
Koss
20651, 21061
SVA
20717
Lasonic
20627, 20798
Sylvania
20675, 20821, 21268
Lecson
21533
Symphonic
20675, 20821, 21268, 21334
Lenoxx
21127
Tatung
20770
LG
20591, 20741, 20869
Teac
20571, 20717, 20790
LiteOn
21058, 21158, 21416, 21440, 21656, 21738
Technics
20490, 20703
Loewe
20511, 20741
Technika
20770
Logix
20783
Terapin
21031
Magnasonic
20651, 20675
Tevion
20651
Magnavox
20503, 20539, 20646, 20675, 20821, 21268, 21354,
21506
Theta Digital
20571
Thomson
20522, 20511
Marantz
20503, 20539, 20675
Tivo
21503, 21512, 21588
McI ntosh
21533, 21273
Toshiba
Medion
20651
20503, 20573, 20539, 20695, 21045, 21154, 21503,
21510, 21588, 21769
Memorex
20695, 20831, 21270
Unimax
20770
Microsoft
20522, 22083
Universum
20591
Minato
20752
Urban Concepts
20503, 20539
Mintek
20839, 20717
US Logic
20839
21064, 21226
Mitsubishi
21521, 20521
V
NAD
20741
Venturer
20790
Naiko
20770
Vizio
21064, 21226
NEC
20785, 20869
Xbox
20522, 22083
Nesa
20717
Yamaha
20490, 20539, 20545
NexxTech
21402
Yamakawa
20872
Norcent
21003, 20872, 21107, 21265
Zenith
20503, 20591, 20741, 20869
Onkyo
20503, 20627, 21769
Zeus
20784
Oppo
20575, 21224
Zoece
21265
Optimus
20571
24
www.insignia-products.com
Insignia NS-LCD52HD-09 52” LCD HD TV
Setup Codes for DVD Players (Blu Ray and HD-DVD)
Satellite Receivers and DVR/PVR Systems
Denon
22258
Setup Codes for Satellite Receivers
I ntegra
21769
AlphaStar
00772
LG
20741
Bell ExpressVu
00775, 01170
Microsoft
22083
Onkyo
21769
Panasonic
21641
Philips
22084
Pioneer
20142
RCA
21769
Samsung
20199
Chaparral
00216
Coolsat
01806
Crossdigital
01109
DirecT V
01377, 00392, 00566, 00639, 01639, 01142, 00247,
00749, 01749, 00819, 01856, 01076, 01108, 00099,
01109, 01392, 01414, 01442, 01443, 01444, 01609,
01640
Sharp
22250
Dish Network System
01505, 00775, 01170, 01775
Sony
21516
Dishpro
01505, 00775, 01775
Toshiba
21769
Echostar
01505, 00775, 01170, 01775
Xbox
22083
Expressvu
00775, 01775
Fortec Star
01821
Setup Codes for DVD/PVR Combos
Controlled by the DVD
Funai
01377
GE
00392, 00566
00869
Go Video
21730
General I nstrument
Humax
21500, 21588
GOI
00775, 01775
LG
20741
Hitachi
00749, 00819
Panasonic
20490
Houston
00775
Philips
21340
HTS
00775, 01775
Pioneer
20631, 21512
RCA
20522
Sharp
21256
Sony
21033, 21070
Sylvania
20675
Tivo
21512
Toshiba
21503, 21510, 21588
Setup Codes for Home Automation
Hughes Network Systems
Humax
01142, 00749, 01749, 01442, 01443, 01444
01790
I nnova
00099
Jerrold
00869
JVC
00775, 01170, 01775
LG
01226, 01414
Magnavox
00722
McI ntosh
00869
00749
Accutek
31215
Mitsubishi
Amana
31716
Motorola
00869
Bionaire
30846, 31215, 31861
Netsat
00099
Da-Lite
31794
Next Level
00869
Draper
32190
Panasonic
00247, 00701
Frigidaire
31333
Pansat
01807
GE
30240
Philips
01142, 00749, 01749, 00775, 00819, 01076, 00722,
00099, 01442
GoldStar
31537
Holmes
31215
Primestar
00869
Kenmore
31537
Proscan
00392, 00566
Lasko
30846, 31890
RadioShack
00566, 00775, 00869
LG
31537
RCA
00392, 00566, 01142, 00775, 00855, 00143, 01392,
01442
Lightolier
30184
Lutron
30597, 30318, 31239, 31597
Samsung
01377, 01142, 01276, 01108, 01109, 01442, 01609
Marmitek
30167
SK Y
00099
One For All
30167
Sony
00639, 01639, 01640
PCS
30184
Star Choice
00869
RadioShack
30240
Star Trak
00772, 00869
Screen Research
32097
Thomson
00392, 00566
Security System
30167
Tivo
01142, 01442, 01443, 01444
Sharper I mage
30846
Toshiba
00749, 01749, 00790, 01285
SmartLinc
30184
Universal
30167
Universal X10
30167
Whirlpool
31332
Windmere
31215
X10
30167
UltimateT V
01392, 01640
Ultrasat
01806
Uniden
00722
Voom
00869
Zenith
01856
www.insignia-products.com
25
Insignia NS-LCD52HD-09 52” LCD HD TV
Setup Codes for TVs
Setup Codes for TVs (continued)
A-Mark
10047, 10054
Accurian
11803
Accuscan
10047
Action
10030, 10873
Admiral
10047, 10054, 10017, 10051, 10093, 10463, 10180
Advent
10761, 10783, 10815, 10817, 10842
Adventuri
10000
Agna
10150
Aiko
10092
Akai
10060, 10812, 10702, 10030, 10145, 10056, 10672, 11675,
11676, 11935
Albatron
10700, 10843
Alfide
10672
Alleron
10030
Ambassador
10150, 10177
America Action
10180
American High
10000, 10060
Ampro
10751
Amstrad
10171, 10177
Amtron
10000, 10180
Anam
10180
AOC
10180, 10030, 11365
Aomni
11623
Apex Digital
10156, 10748, 10879, 10765, 10767, 10890, 11217
Astar
11531, 11738
Audinac
10180
Audiovox
10451, 10180, 10092, 10623, 10802, 10846, 10875, 11937,
11951, 11952
Aventura
10171
Axion
11937
Baysonic
10180
Beaumark
10017, 10178, 10030
Belcor
10030
Bell & Howell
10054, 10154, 10093
BenQ
11032, 11212, 11315
Boxlight
10893
Bradford
10180
Brockwood
10178, 10030, 10056
Broksonic
10236, 10463, 10180, 10177, 11935
Byd:sign
11309
Candle
10030, 10056
Capehart
10017, 10178, 10030, 10092
Carnivale
10030
Car ver
10054
Celebrity
10000
Celera
10765
Changhong
10156, 10765, 10767, 10783
Cineral
10451, 10092
Citek
10047
Citizen
10054, 10000, 10451, 10463, 10180, 10060, 10030, 10171,
10092, 10056, 11935
Clarion
10180
Classic
10030, 10092, 10056
Colortyme
10047, 10054, 10017, 10060, 10178, 10030
Commercial Solutions
11447, 10047
Concerto
10056
Conic
10178
Contec
10180
Craig
10180, 10171
Crosley
10054, 10000, 10180, 10030, 10171
Crown
10093, 10180, 10056, 10672
Electroband
10000
Electrograph
11623, 11755
Electrohome
10154, 10000, 10463, 10150, 10178, 10030, 10056
Emerald
10178, 10177
Emerson
10047, 10154, 10451, 10236, 10463, 10180, 10150, 10178,
10171, 10177, 10623, 11394, 11963
Emprex
11422
Envision
10030, 10813, 11365
Epson
10833, 10840
ESA
10812, 10171, 11963
Fisher
10054, 10154, 10000
Fortress
10093
Fujitsu
10683, 10809, 10853
Funai
10000, 10180, 10171, 11271, 11963
Futuretech
10180
Gateway
11756, 11755
GE
11447, 10047, 10000, 10051, 10451, 10060, 10178, 10030,
11147, 11347
Gemini
10047
Gibralter
10017, 10000, 10030
Go Video
10886
Go Vision
11937
GoldStar
10047, 10054, 10178, 10030, 10056, 11154
Gradiente
10053, 10056
Grundig
10706, 10672, 10683
Grundy
10180
Grunpy
10180
Haier
11034
Hallmark
10236, 10180, 10178
Hannspree
11348, 11351, 11745
Harley Davidson
10000, 10180, 10060, 10178, 10030
Harman/Kardon
10054
Har vard
10180
Havermy
10093
Heathkit
10017
Helios
10865
Hello K itty
10451
Hewlett Packard
11494, 11502, 11642
Hisense
10748
Hitachi
10047, 10054, 10017, 10000, 10051, 11145, 10145, 10056,
11445, 11643
HP
11494, 11502, 11642
Hyundai
10849, 10865, 11219, 11294
iLo
11286, 11603, 11684, 11990
I ma
10236, 10180, 10178
I nfinity
10054
I nFocus
11164
I nitial
11603, 11990
I nsignia
10171, 11204, 11326, 11517, 11564, 11641, 11710, 11780,
11963, 12002
I nteq
10017, 10145
JBL
10054
JCB
10000
Jensen
10761, 10815, 10817
JI L
10030
Jutan
10030
JVC
10054, 10053, 10030, 10650, 10731, 11253, 11774
Kamp
10017, 10180
Kawasho
10030
K EC
10180, 10060
Kenwood
10180, 10030
Crown Mustang
10672
K LH
10156, 10180, 10765, 10767
Curtis Mathes
10047, 10054, 10154, 10000, 10051, 10451, 10093, 10180,
10060, 10702, 10178, 10030, 10145, 10166, 10056, 10466,
11147, 11347
K loss
10030
Konka
10180, 10720
CXC
10180
KTV
10463, 10180, 10030
Cytron
11326
Lark
10154
Daewoo
10451, 10178, 10092, 11661, 11756, 10623, 10661, 10672,
11755
LG
10054, 11265, 10060, 10178, 10030, 10056, 10700, 10856,
11154, 11178, 11423, 11993
Dayton
10092
Lloyd's
10236, 10180, 10030, 10056
Daytron
10178, 10030, 10092, 10056
Logik
10236, 10180, 10056
Dell
11080, 11178, 11264, 11403, 11863
Luxman
10056
Denon
10145
LXI
Digital Life
10872
10047, 10054, 10017, 10154, 10000, 10156, 10051, 10093,
10060, 10053, 10178, 10030, 10171, 10166, 10056
Magnasonic
10054, 10000, 10156, 10093, 10030, 10092, 10056
Magnavox
10047, 11454, 10054, 10154, 10000, 10250, 10051, 10180,
10060, 10030, 10171, 10092, 10706, 10802, 11198, 11254,
11365, 11755, 11866, 11963, 11990
Dream Vision
11164
Dumont
10017, 10180, 10178
Durabrand
10463, 10180, 10178, 10171, 11034
Dwin
10093, 10720, 10774
Dynex
11463, 11780, 11785, 11810
Eaton
10060
26
www.insignia-products.com
Insignia NS-LCD52HD-09 52” LCD HD TV
Setup Codes for TVs (continued)
Setup Codes for TVs (continued)
Majestic
10017
Saville
10060
Marantz
11454, 10054, 10030, 10704, 10855, 11154, 11398
Sceptre
10878, 11217, 11360, 11599
Matsui
10056, 10177
Scotch
10178
Matsushita
10250, 10051, 10650
Scott
10236, 10180, 10178, 10030, 10177, 11711
Sears
10047, 10054, 10017, 10154, 10000, 10156, 10051, 10093,
10060, 10053, 10178, 10030, 10171, 10166, 10056
Maxent
11756, 10762, 11211, 11714, 11755, 11757
Megapower
10700
Megatron
10047, 10178, 10145, 10056
Memorex
10154, 10463, 10180, 10150, 10178, 10030, 10056
MGA
10150, 10178, 10030
MGN Technology
10178
Micro Genius
10150
Midland
10047, 10017, 10051, 10056
Mintek
11603, 11990
Mitsubishi
10154, 10093, 11250, 10150, 10178, 10030, 10836, 10868,
11392
Monivision
10700, 10843
Motorola
10054, 10051, 10093, 10150
MTC
10180, 10060, 10030, 10092, 10056
Seleco
11351
Sharp
10054, 10093, 10180, 10491, 10688, 10689, 10818, 10851,
11602
Sheng Chia
10093
Shivaki
10178
Siemens
10145
Signature
10047, 10093, 10030
Simpson
10178, 10030
Singer
10060, 10092
Solar Drape
10000
Sole
10813, 11623
Sony
10017, 10154, 11100, 10000, 10150, 10053, 10834, 11685
Soundesign
10180, 10178, 10056
Sova
11952
Soyo
11520, 11826
Multitech
10180
NAD
10156, 10178, 10166, 10056, 10866, 11156
NEC
10047, 10178, 10030, 10056, 10497, 10704, 10882, 11398,
11704
Spectravision
10156, 10178
10762, 11755
Squareview
10171
New Tech
10056
SR2000
10154, 10171
Nikko
10178, 10030, 10092
SSS
10180
Nikkodo
10178, 10030, 10092
Starlite
10236, 10180
Nishi
10030
Studio Experience
10843
Norcent
10748, 10824, 11365
Superscan
10093, 10864
Nor wood Micro
11286
Supreme
10000
NTC
10092
SV 2000
10054
NetT V
Nyon
10000
SVA
10748, 10587, 10865, 10870, 10871, 10872
Olevia
11144, 11240, 11331, 11610
Sylvania
10047, 10054, 10154, 10000, 10051, 10178, 10030, 10171,
10092, 10056, 11271, 11314, 11394, 11864, 11963
Onwa
10180
Optimus
10154, 10250, 10093, 10180, 10150, 10178, 10030, 10166,
10056, 10650
Symphonic
10000, 10180, 10178, 10171
Syntax
11144, 11240, 11331, 11610
10093
Optoma
11348
Tandy
Optonica
10093
Tatung
10000, 10051, 11756, 11286
Orion
10017, 10236, 10463, 10180, 10178, 11463, 10177
Teac
10154, 10706, 10689
Pace
10092
Technics
10054, 10250, 10051
Panasonic
10054, 10000, 10156, 10250, 10051, 10236, 10030, 10650,
11291, 11310, 11410, 11480, 11941
Technovox
10030
Techview
10847, 12004
Panda
10706
Techwood
10250, 10051, 10060, 10056
Paxonic
10060, 10030
Teco
11040
PCE
10156, 10060
Teknika
10054, 10463, 10180, 10150, 10060, 10178, 10092, 10056
Penney
10047, 10000, 10156, 10250, 10051, 10060, 10178, 10030,
10056, 11347
Telecolor
10017
Petters
11523
Philco
10054, 10463, 10030, 10145
Philips
11454, 10054, 10030, 10171, 10056, 10690, 11154, 11254,
11744, 11867
Telefunken
10702, 10056
T homas
10047, 10178, 10056
T homson
11447, 10047
TMK
10236, 10180, 10178, 10056, 10177
Pilot
10051, 10060, 10178, 10030, 10056
T NCi
10017
Pioneer
10166, 10679, 10866, 11260, 11398, 11457
Tocom
10156
Toshiba
10154, 11256, 10156, 10150, 11265, 10060, 11145, 10145,
10166, 12006, 11935, 11704, 11656, 11635, 11524, 11356,
11164, 11156, 10845, 10832, 10822, 10650
Planar
11496
Polaroid
10765, 10865, 11276, 11314, 11326, 11328, 11341, 11523,
11766, 12002
Portland
10451, 10092
Precision
10236, 10180, 10177
Prima
10761, 10783, 10815, 10817, 11785
Princeton
10700, 10717
Prism
10250, 10051
Proscan
11447, 10047, 10466, 11347
Proton
10178, 10466
Pulsar
10017, 10092
Pulser
10178, 10092
Quartz
10150, 10178
Quasar
10250, 10051, 10650
Totevision
10051
Toyomenka
10178
Truetone
10250, 10051
TruTech
11723
T VS
10463
Ultra
10092
Universal
10047
Universum
10177
US Logic
11286
V
11756, 10864, 10885, 11755
Vector Research
10030
Victor
10053
Rabbit
10047
Vidikron
10054, 11292, 11398, 11629
RadioShack
10047, 10154, 10180, 10150, 10178, 10030, 10056
Vidtech
10178
RCA
11447, 10047, 10054, 10000, 10051, 10093, 10178, 12002,
11958, 11781, 11547, 11347, 11247, 11147, 11047, 10774,
10679, 10090
Viewsonic
10857, 10864, 10885, 11330, 11578, 11627, 11640, 11755,
12014
Realistic
10047, 10154, 10180, 10150, 10178, 10030, 10056
RevolutionHD
11623
Runco
10017, 10060, 10030, 10497, 10603, 11292, 11398, 11629
Sampo
10047, 10030, 11756, 10762, 11755
Samsung
10047, 10054, 10017, 10154, 10060, 10812, 10702, 10178,
10030, 10056, 10587, 10766, 10814, 11060, 11575
Sanky
10060, 10030
Sansui
10463, 10060, 10030, 11409, 11935
Sanyo
10047, 10054, 10154, 10000, 10463, 10171, 10088, 10799,
10893, 11142, 11755
Viking
10060
Viore
11684
Vizio
11756, 11758, 10864, 10885, 11755
Wards
10047, 10054, 10017, 10154, 10000, 10051, 10093, 10236,
10178, 10030, 10166, 10056, 10866, 11156
Waycon
10156
Welton
10178
Westinghouse
10000, 10451, 10885, 10889, 10890, 11282, 11577, 11712
White Westinghouse
10451, 10236, 10463, 10623, 10889
www.insignia-products.com
27
Insignia NS-LCD52HD-09 52” LCD HD TV
Setup Codes for TVs (continued)
World
Setup Codes for TV/VCR Combination
Controlled by the TV
10451, 10236, 10463, 10180
Wyse
11365
XR-1000
10154, 10180, 10171
Yamaha
10030, 10769, 10833, 10839, 11526
Yorx
10030
Zenith
10047, 10017, 10000, 10093, 10463, 11265, 10812, 10178,
10030, 11145, 10145, 10171, 10092
Setup Codes for TV/DVD Combination
Controlled by the DVD
America Action
10180
Audiovox
10180
Emerson
10236
Controlled by the VCR
Broksonic
20479, 21479
Citizen
21278
Curtis Mathes
21035
Daewoo
21278
Emerson
20479, 20593, 21278, 21479
Advent
21016
Funai
20000
Akai
20695
GE
20807, 21035, 21060
21237
Apex Digital
20830
GoldStar
Audiovox
21071, 21121, 21122
Harley Davidson
20000
Axion
21071
Hitachi
20000
21037
Broksonic
20695
LG
Citizen
20695
Lloyd's
20000
Emerson
20675, 21268
Magnasonic
20593, 21278
ESA
21268
Magnavox
20000, 20593, 21781
Funai
21268
Memorex
20162, 21037, 21162, 21237, 21262
Go Vision
21071
Mitsubishi
20807
Hitachi
21247
Optimus
20162, 20593, 21162, 21262
Orion
20479, 21479
Panasonic
20162, 21035, 21162, 21262
I nsignia
21268
Jensen
21016
Magnavox
21268
Penney
21035, 21237
Quasar
20162, 21035, 21162
RadioShack
20000, 21037
Panasonic
21490
Philips
20854, 21260
Prima
21016
RCA
21022
Samsung
20899
Sears
20000, 21237
Sansui
20695
Sony
20000, 21232
Sova
21122
Sylvania
21781
Sylvania
20675, 21268
Symphonic
20000, 20593
Toshiba
20695
Thomas
20000
Toshiba
20845, 21145
Zenith
20000, 20479, 21479
Controlled by the TV
Accurian
11803
RCA
20807, 21035, 21060
Samsung
21014
Sansui
20000, 20479, 21479
Setup Codes for TV/VCR/DVD Combination
Controlled by the DVD
Akai
11675, 11935
Audiovox
11937, 11951, 11952
Axion
11937
Akai
Broksonic
11935
Broksonic
20868
Citizen
11935
Emerson
20821
Dynex
11810
Emerson
11394, 11963
ESA
11963
Funai
11963
20899
ESA
20821
Funai
21334
Magnavox
20821
Panasonic
21362, 21462
RCA
21132
20630
iL o
11990
Sharp
I nitial
11990
Superscan
20821
I nsignia
11963, 12002
Sylvania
20821
LG
11993
Symphonic
20821
Magnavox
11866, 11963, 11990
Toshiba
21045
Maxent
11714
Mintek
11990
Controlled by the VCR
Panasonic
11941
Sharp
Polaroid
11523, 11766, 12002
RCA
11958, 12002
Sansui
11935
Sova
11952
Sylvania
11394, 11864, 11963
Techview
12004
Toshiba
11524, 11635, 11935, 12006
28
www.insignia-products.com
20807
Insignia NS-LCD52HD-09 52” LCD HD TV
Setup Codes for VCRs
Setup Codes for VCRs (continued)
A-Mark
20037, 20000, 20046
Jensen
20067
ABS
21972
JVC
20067, 21162
Accurian
20000
K EC
20037
Admiral
20060, 20048, 20039, 20209, 20479
Kenwood
20067, 20038, 20046
Adventura
20037, 20000
Kodak
20035, 20037
Aiwa
20037, 20000
KTV
20000
Alba
20209
LG
20037, 20038, 21037
Alienware
21972
Linksys
21972
Allegro
20039
Lloyd's
20000, 20038
American High
20035, 20081
Loewe
20081
Amstrad
20000
Logik
20000
Astra
20035
Luxor
20046
Audiovox
20037, 20038
LXI
20037, 20000, 20042, 20067
Avis
20000
Magnasonic
20037, 20000, 20593, 21278
Bell & Howell
20035, 20048, 20039, 20000, 20046, 20479
Magnavox
Broksonic
20184, 20121, 20209, 20479, 21479
20035, 20037, 20048, 20039, 20081, 20000, 20149,
20563, 20593, 20618, 21593, 21781
Calix
20037
Marantz
20035, 20081, 20038
Candle
20037, 20038
Marta
20037
Canon
20035
Matsui
20037, 20209
Carver
20035, 20081
Matsushita
20035, 20162, 20081, 21162
Citizen
20035, 20037, 20000, 20209, 20479, 21278
Media Center PC
21972
Classic
20037
MEI
20035
Colortyme
20060, 20035, 20045
Memorex
Colt
20000
20035, 20162, 20037, 20048, 20039, 20000, 20209,
20046, 20479, 21037, 21162, 21237, 21262
Craig
20037
Criterion
20000
Crosley
20035, 20081, 20000, 20149
Curtis Mathes
20060, 20035, 20162, 20000, 21035
CyberPower
21972
Daewoo
20037, 20045, 20046, 21278
Daytron
20037
Dell
21972
Denon
20081, 20042
DirecT V
20739
Dual
20000
Durabrand
20039, 20038
Dynatech
20000
Electrohome
20060, 20037, 20000, 20043, 20209
Electrophonic
20037
Emerald
20184, 20121
Emerex
20032
Emerson
20037, 20184, 20000, 20121, 20043, 20209, 20479,
20593, 21278, 21479, 21593
Fisher
20039, 20000, 20046
Fuji
20035, 20033
Fujitsu
20000
Funai
20037, 20000, 20593, 21593
Metz
20037
MGA
20060, 20043
Microsoft
21972
Mind
21972
Minolta
20042
Mitsubishi
20060, 20048, 20000, 20042, 20067, 20043, 20807
Motorola
20035, 20048
MTC
20000
MT X
20000
Multitech
20039, 20000
NEC
20067, 20038
Nikko
20037
Nikkodo
20037
Niveus Media
21972
Northgate
21972
Olympus
20035, 20162
Optimus
21062, 20035, 20162, 20037, 20048, 20000, 20593,
21162, 21262
Orion
20184, 20000, 20121, 20209, 20479, 21479
Panama
20035
Panasonic
21062, 20035, 20162, 20000, 20225, 20614, 20616,
21035, 21162, 21262
Penney
20035, 20162, 20037, 20081, 20000, 20042, 20067,
20038, 21035, 21237
20042
Garrard
20000
Pentax
Gateway
21972
Philco
20035, 20081, 20000, 20209, 20479
GE
20060, 20035, 20048, 20000, 20149, 20807, 21035,
21060
Philips
20035, 20162, 20048, 20081, 20045, 20000, 20209,
20616, 20618, 20739, 21081, 21181
Gemini
20060
Pilot
20037
Genexxa
20037, 20000
Pioneer
20162, 20081, 20042, 20067
Go Video
20614
Polk Audio
20081
GoldStar
20035, 20037, 20039, 20000, 20038, 21237
Presidian
21593
Goodmans
20037, 20081, 20000
Proscan
20060, 21060
Gradiente
20000
Protec
20000
20039
Granada
20081, 20042
Pulsar
Grundig
20081
Quarter
20046
Harley Davidson
20000
Quartz
20035, 20046
Harman/Kardon
20081, 20038
Quasar
20035, 20162, 21035, 21162
Headquarter
20046
RadioShack
Hewlett Packard
21972
20035, 20162, 20037, 20048, 20000, 20046, 21037,
21162
Radix
Randex
20037
20037
RCA
20060, 20035, 20048, 20045, 20000, 20042, 20149,
20807, 20880, 21035, 21060
Realistic
20035, 20162, 20037, 20048, 20000, 20121, 20046,
21162
HI -Q
20035, 20000
Hitachi
20035, 20037, 20045, 20000, 20042, 20089
Howard Computers
21972
HP
21972
Hughes Network Systems
20042, 20739
Humax
20739
ReplayT V
20614, 20616
Hush
21972
Ricavision
21972
Hytek
20000
Runco
20039
iBUYPOWER
21972
Samsung
20060, 20045, 20000, 20038, 20739, 21014
I nstant Replay
20035
Sanky
20048, 20039
Sansui
20000, 20067, 20209, 20479, 21479
www.insignia-products.com
29
Insignia NS-LCD52HD-09 52” LCD HD TV
Setup Codes for Video Accessories
Setup Codes for VCRs (continued)
Sanyo
20000, 20046, 20479
2Wire
02045
Scott
20184, 20045, 20121, 20043
ABS
01272
Sears
20060, 20035, 20162, 20037, 20048, 20039, 20033,
20045, 20000, 20042, 20067, 20043, 20209, 20046,
21237
Access HD
02185
Accurian
01653
Alienware
01272
Sharp
20048, 20032, 20000, 20807, 20848
Amino
01481
Shintom
20039, 20000
AT&T
00858, 02045
Siemens
20037
Buffalo
01739
Signature
20060, 20035, 20037, 20048, 20000, 20149, 20046,
20479
CASTi
02305
CyberPower
01272
Singer
20037
Sonic Blue
20614, 20616
Sonographe
20046
Sony
20035, 20032, 20033, 20000, 20067, 20046, 20636,
21032, 21232, 21972
Soundmaster
20000
Stack 9
21972
Howard Computers
01272
STS
20042
HP
01272, 01267
SV2000
20000
Hush
01272
SVA
20000
iBUYPOWER
01272
Sylvania
20035, 20081, 20000, 20043, 20593, 21593, 21781
I nsignia
01415
Symphonic
20000, 20593, 21593
KoolConnect
01481
D-Link
01554, 01731, 02186
Digital Stream
02303
Epson
01563
Gateway
01272
Hewlett Packard
01272, 01267
Systemax
21972
LG
01415
Tagar Systems
21972
Linksys
01272, 01365
Tandy
20000
Media Center PC
01272
Tashiko
20037
Microsoft
01272, 02049
01272
Tatung
20048, 20081, 20000, 20067
Mind
Teac
20000, 20067
Motorola
00858, 01363, 01998
Technics
20035, 20162, 20037, 20000
Netgear
02036
Teknika
20035, 20037, 20000
Niveus Media
01272
Tevion
20479
Northgate
01272
Thomas
20000
Panasonic
01120
Thomson
20060
Pioneer
01010
Tivo
20618, 20636, 20739, 21996
Ricavision
01272
TMK
20000
Roku
01486
TNI X
20037
Samsung
01190, 01490
Toshiba
20045, 20000, 20043, 20209, 20845, 21008, 21145,
21972, 21996
Scientific Atlanta
00858
Sensor y Science
01126
Totevision
20037
Sharp
01010
Touch
21972
SMC
01456
Trix
20037
Sony
01272, 01324, 01364
Ultra
20045
Stack 9
01272
Vector
20045
SureWest
01481
Vector Research
20184, 20038
Sylvania
01563
Victor
20067
Systemax
01272
01272
Video Concepts
20045
Tagar Systems
Videomagic
20037
Toshiba
01272
Videosonic
20000
Touch
01272
Viewsonic
21972
Viewsonic
01272, 01329
Villain
20000
Vizio
01126
Voodoo
21972
Voodoo
01272
Wards
20060, 20035, 20037, 20048, 20081, 20033, 20045,
20000, 20042, 20043, 20038, 20149, 20046, 20479
VUDU
02298
Xbox
02049
Wharfedale
20593
Zenith
01415
White Westinghouse
20000, 20209, 20479
ZT Group
01272
World
20209, 20479
XR-1000
20035, 20000
Yamaha
20038
Zenith
20037, 20039, 20033, 20000, 20209, 20479, 21479
ZT Group
21972
30
www.insignia-products.com
Insignia NS-LCD52HD-09 52” LCD HD TV
Specifications
•
•
Design and specifications are subject to change
without notice.
Analog standard
NTSC
Digital standard
ATSC, 8-VSB, Clear-QAM
Screen
52-inch
Channel coverage
VHF: 2-13
UHF: 14-69
CATV: Mid band - A-8 ~ A-1, A ~ I
Super band - J ~ W
Hyper band - AA ~ ZZ, AAA, BBB
Ultra band - 65 ~ 94, 100 ~ 135
•
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced technician for
help.
Modifications
The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly
approved by Insignia may void the user’s authority to operate
the equipment.
Cables
Connections to this device must be made with shielded
cables with metallic RF/EMI connector hoods to maintain
compliance with FCC Rules and Regulations.
Canadian notice
Power source
AC 100-240 V ~ 50-60 Hz, 4.0 A
Power
consumption
<350 W with TV on
<1 W in standby mode
Audio power
10 W + 10 W internal speaker
S-Video input
Y:1 V (p-p), 75 ohm, negative sync
C:0.286 V (p-p) (burst signal), 75 ohm
Video/audio input
Video:1 V (p-p), 75 ohm, negative sync
Audio:500 mV (rms)
Component input
Y:1 V (p-p), 75 ohm, including sync
Pr/Cr:±0.35 V (p-p), 75 ohm
Pb/Cb:±0.35 V (p-p), 75 ohm
Audio:500 mV (rms)
Suggested resolutions:1080i, 720p, 480p,
480i
HDMI input
3 HDMI input terminals
HDCP compliant
E-EDID compliant
Suggested scan rates:1080p, 1080i, 720p,
480p, 480i
VGA input
D-Sub 15-pin terminal
E-EDID compliant
Suggested scan rates:640×480 /60 Hz,
800×600 /60 Hz, 1024×768 /60 Hz,
1920×1080 /60 Hz
Audio input: Headphone mini-jack for stereo
Accessories
Power cord
User guide
Quick start guide
Remote control
VGA cable
PC audio cable
Batteries (2 AA)
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Avis Canadian
Cat apparel numerous de la classed B respected toutes les
exigencies du règlement sur le materiel brouilleur du
Canada.
Copyright
© 2008 Insignia. Insignia and the Insignia logo are
trademarks of Best Buy Enterprise Services, Inc. Other
brands and product names are trademarks or registered
trademarks of their respective holders. Specifications and
features are subject to change without notice or obligation.
For service and support call (877) 467-4289.
Dolby
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules.
Operation of this product is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply within
the limits for a class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
www.insignia-products.com
31
Insignia NS-LCD52HD-09 52” LCD HD TV
32
www.insignia-products.com
Insignia NS-LCD52HD-09 52” LCD HD TV
One-Year Limited Warranty
Insignia Products (“Insignia”) warrants to you, the
original purchaser of this new NS-LCD52HD-09
(“Product”), that the Product shall be free of defects in
the original manufacture of the material or workmanship
for a period of one (1) year from the date of your
purchase of the Product (“Warranty Period”). This
Product must be purchased from an authorized dealer of
Insignia brand products and packaged with this warranty
statement. This warranty does not cover refurbished
Product. If you notify Insignia during the Warranty Period
of a defect covered by this warranty that requires
service, terms of this warranty apply.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the
date you purchased the Product. The purchase date is
printed on the receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of
the material or workmanship of the Product is
determined to be defective by an authorized Insignia
repair center or store personnel, Insignia will (at its sole
option): (1) repair the Product with new or rebuilt parts;
or (2) replace the Product at no charge with new or
rebuilt comparable products or parts. Products and parts
replaced under this warranty become the property of
Insignia and are not returned to you. If service of
Products or parts are required after the Warranty Period
expires, you must pay all labor and parts charges. This
warranty lasts as long as you own your Insignia Product
during the Warranty Period. Warranty coverage
terminates if you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a retail store location,
take your original receipt and the Product to the store
you purchased it from. Make sure that you place the
Product in its original packaging or packaging that
provides the same amount of protection as the original
packaging. If you purchased the Product from an online
web site, mail your original receipt and the Product to the
address listed on the web site. Make sure that you put
the Product in its original packaging or packaging that
provides the same amount of protection as the original
packaging.
To obtain in-home warranty service for a television with a
screen 25 inches or larger, call 1-888-BESTBUY. Call
agents will diagnose and correct the issue over the
phone or will have an Insignia-approved repair person
dispatched to your home.
•
•
•
Products sold as is or with all faults
Consumables, such as fuses or batteries
Products where the factory applied serial number
has been altered or removed
REPAIR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS YOUR EXCLUSIVE REMEDY.
INSIGNIA SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
THE BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT, INCLUDING, BUT
NOT LIMITED TO, LOST DATA, LOSS OF USE OF
YOUR PRODUCT, LOST BUSINESS OR LOST
PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER
EXPRESS WARRANTIES WITH RESPECT TO THE
PRODUCT, ALL EXPRESS AND IMPLIED
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
AND CONDITIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED IN DURATION TO THE WARRANTY PERIOD
SET FORTH ABOVE AND NO WARRANTIES,
WHETHER EXPRESS OR IMPLIED, WILL APPLY
AFTER THE WARRANTY PERIOD. SOME STATES,
PROVINCES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS, WHICH VARY FROM STATE
TO STATE OR PROVINCE TO PROVINCE.
Contact Insignia:
For customer service please call 1-877-467-4289
www.insignia-products.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A.
55423-3645
© 2008 Best Buy Enterprise Services, Inc.
All rights reserved. INSIGNIA is a trademark of Best Buy
Enterprise Services, Inc. Registered in some countries.
All other products and brand names are trademarks of
their respective owners.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the
product in the United States, Canada, and Mexico.
What does the warranty not cover?
This warranty does not cover:
• Customer instruction
• Installation
• Set up adjustments
• Cosmetic damage
• Damage due to acts of God, such as lightning
strikes
• Accident
• Misuse
• Abuse
• Negligence
• Commercial use
• Modification of any part of the Product, including
the antenna
• Plasma display panel damaged by static
(non-moving) images applied for lengthy periods
(burn-in).
This warranty also does not cover:
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage supply
• Attempted repair by anyone other than a facility
authorized by Insignia to service the Product
www.insignia-products.com
33
Insignia NS-LCD52HD-09 52” LCD HD TV
34
www.insignia-products.com
Insignia NS-LCD52HD-09 52” LCD HD TV
www.insignia-products.com
35
TM
www.insignia-products.com
(877) 467-4289
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
© 2008 Best Buy Enterprise Services, Inc.
All rights reserved. INSIGNIA is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries.
All other products and brand names are trademarks of their respective owners.
ENGLISH
08-1503