Daikin | REYQ120PATJ | Specifications | Daikin REYQ120PATJ Specifications

VRVIII
AIR-COOLED
AIR-COOLED
n
COMMERCIAL
n
RENOVATION
n
NEW CONSTRUCTION
Daikin’s VRVIII system is the 7th generation of the original
Daikin VRV® launched in 1982. Completely re-engineered to
realize opportunities for VRV in taller / larger buildings, it
utilizes the latest advances in refrigeration and air-conditioning
technology. The totally new Daikin Inverter compressor system
delivers improved efficiency and performance, while ensuring
satisfaction of demands throughout the connected zones. With
a choice of 460V/3ph/60Hz or 208-230V/3ph/60Hz, the heat
pump or heat recovery configurations power up to 20-Ton
capacity from a single piping network. The system also allows
up to 41 indoor fan coil units, a 200% connection index, and
integrated controls, with BMS options and piping limitations
never before seen with a DX system. With these attributes,
VRVIII naturally positions itself wherever traditional chilled
water systems are desired.
A B SO L U T E C O MF O RT
2
DAIKIN AC
Features and Benefits
Commercial sites can range in size from a few hundred to several thousand square feet. That’s why Daikin offers the new VRVIII aircooled system with advanced features to meet practically any challenge. Completely re-engineered to realize opportunities for VRV
in taller / larger buildings, it utilizes the latest advances in refrigeration and air-conditioning technology.
It is widely used worldwide in applications such as:
n Health care
n Hotels and conference facilities
n Offices
n Residential multi-family
n Restaurants
n Retail stores
n Schools
A B SO L UT E C OM F O RT
Available up to 20-Ton in one system, 208-230V/60Hz/3ph or
460V/60Hz/3ph
n Heat pump (heating and cooling) and heat recovery
(simultaneous heating and cooling across multiple zones)
systems available
n Individual zone control
n Can operate up to 41 indoor fan coil units
n Auto charging function
n Continuous heating during defrost operation
n Longest pipe lengths in product class
n Advanced zoning capabilities
n Excellent energy efficiency, especially at part load conditions
n D
aikin’s optimized scroll compressor designed
for R-410A provides a quiet, reliable energy-efficient operation
n Anticorrosion treatment standard on exterior metal parts and
heat exchanger
n Fully compatible with the complete Daikin control suite
including Intelligent Touch Controller, Intelligent Manager III,
and LonWorks® and BACnet® gateways
n
VRVIII is available in heat pump and heat recovery
versions where heating and cooling can be made
available simultaneously across multiple zones.
VRVIII
DAIKIN AC
3
What is VRV?
VRV is a commercially applied heating and cooling system that distributes refrigerant,
rather than water, to multiple fan coil units serving the conditioned spaces. The natural
attributes of a VRV system position it as an alternative to a chiller system.
The Features of VRV
Why Refrigerant?
nEnergy
The commonly used methods of heat transfer in
air-conditioning solutions each exercise different
operational characteristics regarding adding
or removing heat energy to a conditioned space.
efficient, all systems incorporate inverter
“variable speed” compressors
nMany
zones (individual control - up to 41 zones on
one piping network)
Centralized system (long piping - up to
3,280 ft. total)
n
Tight temperature control (Proportional Integral Derivative)
n
n
This diagram represents the energy transfer possible
per pound of media due to the performance
characteristic of the fluid used.
Large capacity (modular systems combination)
The use of refrigerant reduces
installation space compared to
other heat transfer methods.
AIR
n
Quiet operation (down to 25dB(A) indoor)
n
High level control (BACnet, LonWorks, Intelligent
Manager, Intelligent Touch Controller)
n
Superior heating performance
n
Absolute Comfort
0.14 watts/lb
WATER
2.6 watts/lb
REFRIGERANT
25 watts/lb
Part Load Performance VRV
18.0
16.0
14.0
VAV
10.0
285
VRV
Why is VRV an efficient alternative?
223
8.0
200
6.0
154
4.0
110
2.0
0.0
VWV
353
12.0
95
42
10%
20%
47
75% of total operation hours less than 70% of full load
20
30%
40%
50%
60%
70%
80%
90%
100%
The heating and cooling system in a commercial
building is used at 70% or less of its maximum
capacity for 75% of the operational time.
Load
Example VRV system part load curve
Building’s energy demand in hours (Annual)
VRV offers ease of design and installation
Chilled water
central plant layout
with boiler
Complicated System
Cooling Tower
Top Floor
A B SO L U T E C O MF O RT
4
Top Floor
Pump
Water Pipe
Condensing Unit
Refrigerant Piping
Building
Floors
Building
Floors
FCU
AHU
Machine
Room
Boiler
Chiller
DAIKIN AC
Layout
Simple System
Fan Coil Units
And also . . .
EXP Tank
Valves
Header
Machine
Room
Not needed
VRVIII opens up opportunities in larger, more complex buildings
Daikin is using the latest and most revolutionary technologies in the development of the VRVIII system for
large-sized buildings. The system offers greater energy savings, easier installation, longer actual and total piping
length, and more.
Heat exchanger
The new heat exchanger contributes to a high EER and COP
because of an increase from 7% to 10% of the effective
length as well as an optimized e-Pass heat exchanger.
DC fan motor
• Across entire range of models (from 6 to 20-Ton).
• Efficiency improvement by approximately 40%
especially at low speed.
DC fan motor
structure
DC motor efficiency
(comparison with a conventional AC motor)
100
Efficiency (%)
DC motor
80
Approx.
Approx.
60
40%
40%
increase
increase
40
AC motor
20
0
200 300
400 500
600
700 800
900 1000
Motor speed (rpm)
Smooth sine wave DC Inverter
By adoption of the Sine
Wave Inverter, which
smoothes the rotation of
the motor, operation
efficiency is improved
sharply.
Reluctance DC scroll compressor
Daikin’s unique scroll compressor minimizes heat loss and is driven by a
high efficiency motor to achieve significant energy savings.
High torque and efficiency is attained with the use of
neodymium magnets. Achieves 70% reduction in volume.
The secret to raising energy efficiency Powerful magnets!
Reluctance
DC motor
New
High-performance, low-noise new
scroll compressor operates at a faster
rate. The speed increase has been
achieved through advanced stress
analysis for increased strength and
utilization of the advantages (oil film
control) of the high thrust
mechanism*.
*High thrust mechanism
Ferrite magnet
Neodymium magnet
Neodymium magnets are much more
powerful than the widely used ferrite magnets.
By introducing high pressure oil, the reactive
force from the fixed scroll is added to the
internal force, thereby reducing thrust losses.
This results in improved efficiency and lower
sound levels.
Daikin is the only company
in the world dedicated to
manufacturing heating and
cooling units, compressors and
refrigerant. All Daikin systems
in North America employ
“variable speed” compressors
and non-ozone depletion
potential R-410A refrigerant,
which optimize energy
conservation.
A B SO L UT E C OM F O RT
Did you know?
Improving the high efficiency compressor to achieve a high EER and COP
VRVIII
DAIKIN AC
5
VRVIII
Cooling (DB)
Extended Operation Range
122°F
Advanced Proportional Integral Derivative (PID) control of the outdoor
unit enables the VRVIII series to operate at outdoor ambient conditions
down to 23°F in cooling mode and down to -4°F in heating mode.
A new Low Ambient Cooling feature allows the VRVIII heat recovery
systems to operate as low as -4°F in cooling mode as well.
110°F
Daikin is the only VRF manufacturer to provide capacity tables up to
122°F for high ambient design applications. The cooling is guaranteed
at those temperatures. However, both efficiency and cooling output will
start dropping over 110°F.
56°F
Standard operation
range (cooling)
Extended operation
range (cooling)
80°F
68°F
32°F
20°F
-4°F
49ft. Vertical separation
between fan coil units
External Static Pressure (ESP)
295ft.* Vertical separation between the
condensing unit and the fan coil units
540ft. Linear piping length
*295ft. if outdoor unit is above and accessory PCB is installed
The additional ESP (up to 0.32” W.G.) provides far more flexibility
when designing condensing units in plant room applications. No
additional components are required to extend the fan performance.
It is now even easier to put a condensing
unit on each floor or in a mechanical
room and duct out the discharge air.
Louver
ESP up to 0.32” W.G.
Exhaust duct
Duct
A B SO L U T E C O MF O RT
Suction
6
DAIKIN AC
23
8°F
540 (620)
49
295
60
44°F
Ft.
164* (295)
110
92°F
Standard operation
range (heating)
3,280
122
104°F
Long Refrigerant Piping Lengths
Refrigerant piping specifications
Linear piping between condensing unit and furthest located fan coil
unit (equivalent)
Total “one-way” piping in the complete piping network
Vertical (height) separation between the condensing unit and the
fan coil units (if outdoor unit is below)
Vertical (height) separation between fan coil units
Linear piping between 1st REFNET and furthest located fan coil unit
Heating (WB)
-4
-4
VRVIII Benefits in Heating
Advanced Defrost Cycle Operation in Heating
Superior Heating Comfort
Thanks to the newly adopted continuous heating
during defrost function, cold draft discharge from the
indoor unit during defrost is eliminated. Therefore,
heating comfort is improved and better maintained.
Each heat exchanger is defrosted by using heat
transferred from one heat exchanger to the other in
the outdoor unit.
Outdoor unit
Outdoor unit
Outdoor unit
Heating
Defrosting Ex1
Defrosting Ex2
Ex2
Heat
Heat
Ex1
Ex1
Ex2
Ex1
Ex2
(not available in single module heat pump)
Heating Operation While on Defrost Operation
The first graph below shows the defrost cycle on the previous model where it uses a reverse cycle defrost of 10
to 14 minutes and then has to perform a hot start. With VRVIII the outdoor unit continues in heating and the
fans will switch to LL (Low Low). Defrost lasts for 8 to 12 minutes and because heating operation has continued,
no hot start is required.
Heating operation while on defrost operation
Heating cycle is continued also while in defrost operation.
(No hot start)
n The
new VRVIII allows continuous heating
during defrost
Manfolded system
n Approximately
30% or more capacity can be
produced with no hot start required
Previous Model
Hot start
Capacity
n All
Indoor fan stops
Defrost 10-14 min. Hot start
Time
No hot start required with VRVIII
Capacity
About
30%
other VRF systems require the system to switch
to cooling then a hot start to preheat the indoor
unit before resuming operation
n This
causes a disruption to the heating and space
temperature
Airflow down (LL)
Time
8-12 min defrost
Continuous heating during oil return
Oil return operation in Heating
High/low pressure gas pipe
Suction gas pipe
Liquid pipe
Outdoor unit
Change to
cooling
operation.
FAN stop
Indoor units
A B SO L UT E C OM F O RT
Previous Model
When the previous model is in heating mode to
perform an oil recovery cycle (two hours after initial
start up and every eight hours thereafter), the system
must change to cooling. With the improvements to
VRVIII outdoor unit and branch selector unit, the
system continues in the heating mode during the full
oil recovery cycle. Daikin is the only VRF manufacturer
that is capable of continuous heating during oil return.
High/low pressure gas pipe
Suction gas pipe
Liquid pipe
Heating
operation
continues.
Outdoor unit
Heating
Indoor units
VRVIII
DAIKIN AC
7
VRVIII Heat Recovery
Offers simultaneous cooling
and heating operation
on the same piping network
Heating operation for room not
significantly heated by the sun
Branch Selector Unit
By adding high pressure/low
pressure gas piping and a branch
selector unit (sold separately),
simultaneous heating and
cooling operation can be
provided by a single system.
Cooling operation for rooms
significantly heated by the sun
The example below shows two 6-Ton heat pump systems, one operating in full cooling (6 Tons) and one
operating in full heating (6 Tons), the power inputs were 5.74kW and 6.83kW respectively, giving a total of
12.57kW. When looking at the same example with a heat recovery system, with 50% of the capacity operating
in full cooling (6 Tons) and 50% operating in full heating (6 Tons), the power input for the system can be as low
as 5.31kW, this would mean about half reduction in power input.
Indoor Temperature:
67 °F WB (cooling)
70 °F DB (heating)
Outdoor Temperature: 95 °F WB (cooling)
47 °F DB (heating)
Heat Pump
Power Input
Cooling
5.74kW
Cooling
Cooling
Heating
Heating
6.83kW
(22,519 Btu)
Heating
Heat Recovery
Power Input
A B SO L U T E C O MF O RT
Simultaneous
cooling and heating
5.31kW
8
Cooling
DAIKIN AC
Cooling
Heating
Heating
Approximately
50%
Reduction
The new branch selector unit (BSVQ_P) has improved the cooling/heating changeover, oil recovery cycle and
sound level by utilizing expansion valves in place of the 3-way valve and solenoid subcooling valve found in the
previous model.
In the new branch selector unit there is a main and sub expansion valve for the high/low pressure gas pipe, the
suction gas pipe and one for the subcooling circuit.
Liquid pipe
n Improvement
of the cooling/heating changeover
3-WAY
VALVE
ELECTRONIC
EXPANSION
VALVES
SOLENOID
VALVE
ELECTRONIC
EXPANSION VALVE
High/low pressure gas pipe
n
Continuous operation during oil recovery
n
Sound level reduction of branch selector unit
Suction gas pipe
Previous Model
No system interruption in mode changeover The Daikin Difference
With most VRF systems, when changing an indoor unit
from cooling to heating, the heating operation for the
full system is shut down. The system pressure must
equalize in the hot gas line, which causes disruption to
all units in heating. The heating is then started for the
full system and each indoor unit has to go through a
hot start (the indoor unit coil has to be at approximately
93°F) before the fan starts to avoid cold drafts. This
sequence of operation can take approximately 10
minutes.
With the new branch selector unit (BSVQ_P), only the
indoor units changing from cooling to heating will shut
down and only those will go through a hot start causing
no system disruption and only six minutes of downtime
for the indoor unit changing operation mode.
The changeover time can be shortened depending on
the pipe length from the branch selector unit to indoor
unit by simply reprogramming the indoor unit (range
3-10 minutes).
EV
CD
C
H
NEW
C
EV
CD
EV
CD
EV
CD
CD
EV
CD
EV
CD
H
The new branch selector unit has dual expansion valves
on both suction and high/low pressure gas pipes in place
of the 3-way valve in the previous model. This allows
the pressure from the branch selector unit to indoor unit
to slowly equalize by opening the sub expansion valve
on high/low pressure pipe closing all other valves in the
branch selector unit before full heating operation begins
for that indoor unit.
This eliminates the need to stop the heating mode in the
full system and reduces sound level. Also, the solenoid
valve and capillary tube supply to the liquid sub-cool heatexchanger is replaced by an expansion valve to eliminate
the switching sound of the solenoid valve, and also to
enable some control of the amount of refrigerant to flow
through the sub-cool heat-exchanger.
Indoor unit
Liquid pipe
OPEN
CD
FAN
OFF
FAN OFF
Heating interruption
EV
CD
10 min.
EV
CD
No system interruption
EV
CD
HOT START
Branch Selector unit
6 min.
ELECTRONIC
EXPANSION
VALVES
ELECTRONIC
EXPANSION VALVE
High/low pressure gas pipe
OPEN
A B SO L UT E C OM F O RT
Traditional
VRF Model
In most VRF systems, the heating mode for the full system
has to allow the high pressure in the hot gas line to
equalize before heating is started. There then has to be at
least 44 psi difference between gas and suction to have
enough force to switch the 3-way valve which could cause
refrigerant noise.
OPEN
OPEN
OPEN
Suction gas pipe
EV
CD
HOT START
VRVIII
In heating operation
DAIKIN AC
9
Heat Recovery Built-in Flexibility
Benefits of Daikin VRVIII using 3-pipe configuration in its heat recovery version
Daikin’s VRV heat recovery uses a dedicated hot gas pipe during heating operation allowing for higher off coil
temperatures, even at lower ambient conditions, thus increasing the heating capacity of the system. Compared
to a 2-pipe heat recovery system using a liquid/gas mixture line, the Daikin system eliminates the friction
occurring between pure gas and pure liquid when used in the same pipe. Also, the 2-pipe heat recovery systems
have a lower hot gas temperature which can result in a lack of heating capacity and off coil temperatures.
Daikin’s layout example: The Daikin 3-pipe system allows for installation of smaller, easily hidden branch
selector units facilitating installation in remote spaces.
Total= (33ftx3) + (3ftx3) + (6x3x7ft) + (83ftx3) + (12x10ftx2) =
33ft
10ft
3ft
10ft
17ft
10ft
33ft
10ft
50ft
10ft
67ft
720ft
10ft
83ft
7ft
Indoor unit
Branch selector unit
100ft
Other VRF layout examples: 2-pipe systems usually require a
bulky branch controller box needing a drain connection.
Branch controller box located at the end of the hallway
Total= (33x2) + (17+33+50+67+83+100) x 4 =
33ft
Competitors branch
controller box
Branch controller box centrally located
1,467ft
Total= (33x2) + (17+33+50) x 8 =
33ft
17ft
17ft
33ft
33ft
50ft
50ft
67ft
67ft
83ft
83ft
Indoor unit
867ft
100ft
100ft
50ft
33ft
17ft
17ft
33ft
50ft
50ft
33ft
17ft
17ft
33ft
50ft
A B SO L U T E C O MF O RT
As shown above, using a 2-pipe heat recovery system results in an increase of about 20% additional piping and
insulation in best case scenario, augmenting both cost of supplies and labor. Moreover, the Daikin VRV system
ensures an easier compliance with local and national refrigerant safety standards such as ASHRAE Standard 15.
10
DAIKIN AC
VRVIII’s Outstanding performance in cooling and heating
Cooling
Widely acknowledged as the most advanced system of its type in the market, VRV represents a powerful combination
of advanced inverter, heat pump and control technologies. When cooling a space, the system can operate at full load
EER levels as high as 12.2 (6-Ton heat pump) and 12.6 (6-Ton heat recovery). However, the system can operate at
much higher EER levels during part load operation.
Buildings are made up of many individual zones which can have varying heating and cooling requirements. It is more
efficient to cool or heat an individual space as needed than to condition all of the space throughout the building, all
of the time. VRV systems have the ability to control the amount of refrigerant flowing to each of the indoor units,
enabling the use of up to 41 indoor units with differing capacities and styles, providing individualized comfort control,
simultaneous heating and cooling in different zones and heat recovery from one zone to another.
Based on a simulation developed by Daikin’s proprietary tool, EnergyCalc, the graphic below charts an EER curve and
the cooling demand of a building over the time period of one year. Analysis of the building’s annual cooling demand
shows the required cooling capacity is below 70% of the maximum design capacity 75% of the time. With Daikin,
building owners save energy by not paying to heat or cool an empty or unused space.
VRV performance and energy use are highly application-dependent and should be obtained from detailed analysis.
353
17
285
16
15
95
110
20%
47
75% of operational hours
are at 70% of full load or less
40%
50%
60%
70%
42
EER
200
154
14
13
223
Building’s energy demand
in hours. (Annual)
1
30%
80%
90%
100%
216 MBH
240 MBH
12
11
10
For example 1, the graphic shows
that over the course of one full
operational year, the building’s
VRV system analyzed operates
for 223 hours at 70% of its
maximum capacity (thus being at
part load operation). Under this
specific operational condition,
the Daikin VRV has an EER of 16
in this example.
9
8
Full load EER
Heat Pump
96 MBH
108/120 MBH
Full load EER
Heat Recovery
144 MBH
168 MBH
192 MBH
DOE Minimum Level
Example VRV System Part Load Curve
Heating
Comparing a VRVIII and its competition at full load in
heating, the VRVIII 6-Ton heat recovery is 4% more efficient.
VRVIII has also more capacity in heating during low
ambient operation compared to standard VRF systems. At
temperatures of -4°FWB, VRVIII has more heating capacity
than equivalent VRF systems by 16% and 23% respectively.
110,000
100,000
90,000
Daikin
Comp. A
80,000
Comp. B
70,000
60,000
50,000
-4
5
12
20
28
A B SO L UT E C OM F O RT
72 MBH
VRVIII
36
Ambient Temperature °F
44
52
DAIKIN AC
11
VRVIII’s Outstanding performance in cooling and heating
Reduced factory charge
50.00
45.00
45.92
44.06
40.00
35.00
lbs
The factory refrigerant charge has been reduced for
all outdoor units by up to 34% compared to previous
VRV models. This allows for easier application to
satisfy local and national safety standards such as
ASHRAE standard 15.
37.90
36.20
39.90
39.60
40.20
40.20
37.41
33.57
30.00
25.00
20.00
18.10
15.00
18.71
72 MBH
The reduction in the factory charge puts Daikin at up
to 10% less factory refrigerant charge than our VRF
competitors, an excellent advantage to engineers
when it comes to satisfying local and national safety
standards.
19.80
21.10
96 MBH
144 MBH
Daikin VRVIII
168 MBH
192 MBH
216 MBH
240 MBH
Industry Average
(Heat pump 208-230V used as example).
Fusible plugs
Receiver
Environmental consciousness
Fusible
plug
The fusible plugs used in older systems as the pressure relief
device in the liquid receiver have been replaced with pressure relief
valves. Now instead of releasing the refrigerant to the atmosphere,
it is relieved to the low pressure side of the system, a far more
environmentally conscious solution (The safety valve is activated if
the pressure exceeds 570psi).
Fluid line
EV
Fluid line
Pressure relief valves
in low pressure side of
system
BPR
Intake line
High/low pressure gas pipe
Environmental consciousness
Outdoor unit 1
When only one of the outdoor unit modules is
operating due to low load, refrigerant is bypassed
to the other outdoor unit through the pressure
equalizing pipe. By utilizing both heat exchangers part
load energy efficiency is improved.
Outdoor unit 2
Suction gas pipe
Higher efficency by using
other heat exchangers
Equalizing pressure pipe
Liquid pipe
Partial Load
operation
Previous Model
And Competitors
Flare or
flange
Shutoff
valve
Brazed
joint
Shutoff
valve
Outdoor
unit
A B SO L U T E C O MF O RT
High/low pressure gas pipe
Suction gas pipe
Equalizing pressure pipe
Liquid pipe
Flare connections
12
Outdoor
unit
To minimize the chance of leaks, the piping
connections inside the outdoor unit are all brazed.
Also, the flared connections were changed to brazed
connections on liquid and gas shutoff valves.
Brazed joints
DAIKIN AC
Fusible plugs
Receiver
Backup Functions
In order to make operation time equal for each
compressor in a manifolded system, the outdoor units
are used in rotation. The operation priority starts once
the following conditions have been met:
n
On completion of oil recovery cycle
n
On completion of defrost
n
Upon restart once a system has stopped
The cyclical start-up sequence of multiple outdoor
unit systems equalize compressor duty and extends
operating life.
Rotation of outdoor units
System with two outdoor units
Outdoor Unit A Outdoor Unit B
Previous time
Priority 1
Priority 2
This time
Priority 2
Priority 1
Next time
Priority 1
Priority 2
If the system is set to “emergency standard
compressor” operation, the inverter compressor can
operate even if only one indoor unit (with less than
50% index) is in thermostat-on.
Back Up Operation
Back up – redundancy
Should a fault occur on a compressor, the system can
be set into “emergency” mode. This will allow the
system to operate at partial capacity for a period of
24 hours until the problem can be rectified.
Trouble
Alarm
Manual Back Up Single Module
10-Ton System
STD 1
INV
Compressor
Capacity
(approx.)
INVERTER Alarm
Trouble
Stop
50%
STANDARD Alarm
Operate
Trouble
50%
16-Ton System
No. 1 Unit
No.2 Unit
Capacity
(approx.)
INV
STD 1
INVERTER Alarm
Trouble
Stop
Operate
50%
STANDARD 1 Alarm
Stop
Trouble
Operate
50%
Operated by
remote controller
or field setting
again
Auto or Manual Back Up of Manifolded
Systems
In case of compressor trouble in a manifolded system,
it is required to disable the entire module with the
malfunction. It is not possible to disable only one
compressor and leave the other compressor running
in that module. This is due to oil balancing within the
system. The “emergency mode” in a manifolded system
can be set to manual or automatic via a field code.
The automatic mode is achieved by pressing the on/
off button for four seconds once the compressor
malfunction code has been activated. This allows the
end user (if desired) to reset the system and run on 50%
of heating/cooling until a service technician arrives.
A B SO L UT E C OM F O RT
If the system is set to “emergency inverter
compressor” operation, the standard compressor
will operate at the index of the indoor units in
thermostat-on at a minimum 50% of the connected
ratio.
VRVIII
DAIKIN AC
13
Installation & Maintenance
Friendly Design
Automatic Charge Function
Conventional Way:
1. Calculation of additional refrigerant charging volume
2. Charging the unit with additional refrigerant
3. Measuring the weight of the cylinder
4. Judgment based on pressure (test operation)
Indoor
temperature
VRVIII
With VRVIII however, these four steps are omitted since the
VRVIII unit can be charged with the necessary amount of
refrigerant automatically via a push button on the PCB.
Automatic charging will cease once the appropriate amount of
refrigerant has been transferred.
If temperature drops below 32°F outdoors, manual charging
is necessary. After having switched to heating and once the
indoor temperature rises above 32°F, push the auto charge
button to activate auto charge function.
Automatic Test - Simplified Commissioning
90°F
Automatic
charge
function
50°F
Manual
charge
32°F
109°F
Outdoor
temperature
When refrigerant charging has ceased, pushing the test
operation button on the PCB will initiate a check on the wiring,
shut off valves, sensors and refrigerant volume. This test ceases
automatically when completed.
Easy Maintenance Self Diagnostic Function
This function operated via push button on the PCB, speeds
up troubleshooting and should be used for start-up and
maintenance. Disconnected thermistors, faulty solenoid
valves or motor operated valves, compressor malfunctions,
communication errors, etc can be diagnosed quickly.
Automatic Information Storage
During unit operation, storage of data from the last
five minutes occurs automatically. In cases of malfunction,
analysis of data from the last five minutes will be carried out to
identify the location of the problem and cause of malfunction.
Measures to eliminate the cause of malfunction can then be
implemented.
A B SO L U T E C O MF O RT
14
DAIKIN AC
Test operation button
VRV Indoor Units
Capacity Range
Indoor Type
MBH
7.5
09
12
18
24
30
36
42
48
54
72
96
Tons
0.6
0.75
1
1.5
2
2.5
3
3.5
4
4.5
6
8
OSA
OSA
OSA
OSA
OSA
OSA
OSA
OSA
OSA
OSA
OSA
OSA
OSA
OSA
OSA
OSA
OSA
FXTQ_PAVJU
Vertical air handling unit
(horizontal right
configuration is possible)
FXMQ_PVJU
Ducted
DC ducted concealed
ceiling (medium static)
OSA
OSA
OSA
FXMQ_MVJU
Concealed ceiling unit
(medium static)
FXDQ_MVJU
Slim duct built-in
concealed ceiling unit
OSA
OSA
OSA
OSA
OSA
OSA
OSA
OSA
OSA
OSA
OSA
OSA
OSA
OSA
OSA
OSA
FXFQ_MVJU
3’ x 3’ 4-way ceiling
mounted cassette
OSA
OSA
FXZQ_M7VJU
2’ x 2’ 4-way ceiling
mounted cassette
FXAQ_MVJU
Duct-free
Wall mounted unit
FXHQ_MVJU
Ceiling suspended unit
FXLQ_MVJU
Floor standing unit
FXNQ_MVJU
OSA
FXMQ_MFVJU
100% Outside Air
Processing Unit
OSA
Available (11 types, 51 models)
Available with a capacity reduction plug (two additional models)
A B SO L UT E C OM F O RT
Ventilation
Concealed floor standing
unit
Condensate pump standard on model
OSA
Outside air connection possible on model
VRVIII
DAIKIN AC
15
VRVIII Specifications
460V heat pump
Single Module Systems
VRVIII 460V Heat Pump
6-Ton
8-Ton
9-Ton
Model
Name
RXYQ72PAYD
RXYQ96PAYD
RXYQ108PAYD
Nominal Cooling Capacity1
Btu/h
72,000
96,000
108,000
Rated Cooling Capacity
Btu/h
70,000
92,000
104,000
Rated Cooling Input Power (system)
kW
5.74
8.29
9.45
Rated Full Load EER1,3 (system)
12.2
11.1
11.0
Btu/h
81,000
108,000
122,000
Nominal Heating Capacity2
Performance
Rated Heating Capacity
Btu/h
77,000
103,000
116,000
Rated Heating Input Power (system)
kW (Btu/h)
6.6
9.1
10.3
Rated Full Load COP2,3 (system)
3.4
3.3
3.3
Power
V/ph/Hz
460/3/60
460/3/60
460/3/60
Sound Pressure Level at 3ft.
dB(A)
58
58
60
Refrigerant Type and Quantity
(lbs.)
R-410A (18.1)
R-410A (19.8)
R-410A (20.1)
Liquid Pipe (Main Line)
in.
3/8 (Braze)
3/8 (Braze)
1/2 (Braze)
Suction Gas Pipe (Main Line)
in.
3/4 (Braze)
7/8 (Braze)
1-1/8 (Braze)
Refrigerant Piping Vertical Pipe Length (if unit is below FCU)
ft.
295
295
295
Vertical Pipe Length (if unit is above FCU)
ft.
164 (295 with Option)
164 (295 with Option)
164 (295 with Option)
Actual Pipe Length (Equivalent Length)
ft.
540 (620)
540 (620)
540 (620)
Total Pipe Length
ft.
3,280
3,280
3,280
Connectable Indoor Unit Ratio
%
50-130% as Standard (Up to 200% is permitted depending on application & fan coil unit selection)
Connection Ratio
Maximum Number of Indoor Units
Qty.
12
16
18
Weight
lbs.
573
573
573
Unit
Dimensions (H x W x D)
in.
66-1/8 x 36-5/8 x 30-1/8
66-1/8 x 36-5/8 x 30-1/8
66-1/8 x 36-5/8 x 30-1/8
Air Flow
cfm
6,530
6,530
7,060
Fan
External Static Pressure
in. W.G.
0.32
0.32
0.32
Fan Motor Output and Quantity
kW (Qty.)
0.75 x 1
0.75 x 1
0.75 x 1
Maximum Overcurrent Protection (MOP)
A
25
25
30
Minimum Circuit Amps (MCA)
A
20.2
20.3
20.5
Electrical
Minimum Starting Current (MSC)
A
65
65
65
Compressor Rated Load Amps (RLA)
A
7.1
3.9 + 8.4
6.1 + 8.4
Compressor Type
Daikin Scroll x 2
Daikin Scroll x 2
Daikin Scroll x 2
Compressor
Compressor Set-Up
1 INV + 1 FIX
1 INV + 1 FIX
1 INV + 1 FIX
Compressor Capacity Control
%
20 - 100
14 - 100
14 - 100
1 Indoor temp. : 80°FDB or 67°FWB / outdoor temp. : 95°FDB / Equivalent piping length : 25 ft (7.5 m), level difference : 0 ft.
2 Indoor temp. : 70°FDB / outdoor temp. : 47°FDB or 43°FWB / Equivalent piping length : 25 ft (7.5 m), level difference : 0 ft.
3 The tested system EER and COP values reflect “full load efficiency only and are the results from testing to the Alternate Test Method (ATM) guidelines
provided by the U.S. Department of Energy (DOE) in the Federal Register / Vol. 74, No. 68 / Friday April 8, 2009 / Notices / Pages 15955-15958.
A B SO L U T E C O MF O RT
16
RXYQ72PAYD
RXYQ96PAYD
RXYQ108PAYD
DAIKIN AC
Double Module Systems
VRVIII 460V Heat Pump
Name
12-Ton
14-Ton
16-Ton
18-Ton
20-Ton
RXYQ144PAYD
RXYQ168PAYD
RXYQ192PAYD
RXYQ216PYDNR
RXYQ240PYDNR
Model
RXYQ96PAYD +
RXYQ120PYDNR +
Combination
RXYQ72PAYD x 2
RXYQ96PAYD x 2
RXYQ120PYDNR x 2
RXYQ72PAYD
RXYQ96PAYDN
Nominal Cooling Capacity1
Btu/h
144,000
168,000
192,000
216,000
240,000
Rated Cooling Capacity
Btu/h
138,000
160,000
184,000
206,000
240,000
Rated Cooling Input Power (system)
kW
11.31
14.04
17.20
19.43
24.49
Rated Full Load EER1,3 (system)
12.2
11.4
10.7
10.6
9.80
Nominal Heating Capacity2
Btu/h
162,000
188,000
216,000
243,000
270,000
Performance
Rated Heating Capacity
Btu/h
154,000
180,000
206,000
232,000
258,000
Rated Heating Input Power (system)
kW (Btu/h)
13.3
16.0
18.9
21.25
23.63
Rated Full Load COP2,3 (system)
3.4
3.3
3.2
3.2
3.2
Power
V/ph/Hz
460/3/60
460/3/60
460/3/60
460/3/60
460/3/60
Sound Pressure Level at 3ft.
dB(A)
62
61
62
62
63
Refrigerant Type and Quantity
(lbs.)
R-410A (18.1+18.1) R-410A (19.8+18.1)
R-410A (19.8+19.8)
R-410A (20.1+19.8) R-410A (20.1+20.1)
Liquid Pipe (Main Line)
in.
1/2 (Braze)
5/8 (Braze)
5/8 (Braze)
5/8 (Braze)
5/8 (Braze)
Suction Gas Pipe (Main Line)
in.
1-1/8 (Braze)
1-1/8 (Braze)
1-1/8 (Braze)
1-1/8 (Braze)
1-3/8 (Braze)
High and Low Pressure Equalization Pipe
in.
3/4 (Braze)
3/4 (Braze)
3/4 (Braze)
3/4 (Braze)
3/4 (Braze)
Refrigerant Piping
Vertical Pipe Length (if unit is below FCU)
ft.
295
295
295
295
295
Vertical Pipe Length (if unit is above FCU)
ft.
164 (295 with Option) 164 (295 with Option) 164 (295 with Option) 164 (295 with Option) 164 (295 with Option)
Actual Pipe Length (Equivalent Length)
ft.
540 (620)
540 (620)
540 (620)
540 (620)
540 (620)
Total Pipe Length
ft.
3,280
3,280
3,280
3,280
3,280
Connectable Indoor Unit Ratio
%
50-130% as Standard (Up to 200% is permitted depending on application & fan coil unit selection)
Connection Ratio
Maximum Number of Indoor Units
Qty.
25
29
33
37
41
Weight
lbs.
573 + 573
573 + 573
573 + 573
573 + 573
573 + 573
Unit
Dimensions (H x W x D)
in.
(66-1/8 x 36-5/8 x 30-1/8) x 2
Air Flow
cfm
6,530 + 6,530
6,530 + 6,530
6,530 + 6,530
7,060 + 6,530
7,060 + 7,060
Fan
External Static Pressure
in. W.G.
0.32
0.32
0.32
0.32
0.32
Fan Motor Output and Quantity
kW (Qty.)
0.75 x 2
0.75 x 2
0.75 x 2
0.75 x 2
0.75 x 2
Maximum Overcurrent Protection (MOP)
A
25 + 25
25 + 25
25 + 25
25 + 30
30 + 30
Minimum Circuit Amps (MCA)
A
20.2 + 20.2
20.3 + 20.2
20.3 + 20.3
20.5 + 20.3
20.5 + 20.5
Electrical
Minimum Starting Current (MSC)
A
69
69
69
77
78
Compressor Rated Load Amps (RLA)
A
7.1 + 7.1
(3.9 + 8.4) + 7.1 (3.9 + 8.4) + (3.9 + 8.4) (3.9 + 8.4) + (6.1 +8.4)
(6.1 + 8.4) x 2
Compressor Type
Daikin Scroll x 4
Daikin Scroll x 4
Daikin Scroll x 4
Daikin Scroll x 4
Daikin Scroll x 4
Compressor
Compressor Set-Up
(1 INV + 1 FIX) x 2
(1 INV + 1 FIX) x 2
(1 INV + 1 FIX) x 2
(1 INV + 1 FIX) x 2
(1 INV + 1 FIX) x 2
Compressor Capacity Control
%
13 - 100
9 - 100
7 - 100
7 - 100
6 - 100
RXYQ144PAYD
RXYQ168PAYD
RXYQ192PAYD
RXYQ216PYDNR
RXYQ240PYDNR
A B SO L UT E C OM F O RT
1 Indoor temp. : 80°FDB or 67°FWB / outdoor temp. : 95°FDB / Equivalent piping length : 25 ft (7.5 m), level difference : 0 ft.
2 Indoor temp. : 70°FDB / outdoor temp. : 47°FDB or 43°FWB / Equivalent piping length : 25 ft (7.5 m), level difference : 0 ft.
3 The tested system EER and COP values reflect “full load efficiency only and are the results from testing to the Alternate Test Method (ATM) guidelines
provided by the U.S. Department of Energy (DOE) in the Federal Register / Vol. 74, No. 68 / Friday April 8, 2009 / Notices / Pages 15955-15958.
VRVIII
DAIKIN AC
17
VRVIII Specifications
208-230V heat pump
Single Module Systems
VRVIII 208-230V Heat Pump
6-Ton
8-Ton
9-Ton
Model
Name
RXYQ72PATJ
RXYQ96PATJ
RXYQ108PATJ
Nominal Cooling Capacity1
Btu/h
72,000
96,000
108,000
Rated Cooling Capacity
Btu/h
70,000
92,000
104,000
Rated Cooling Input Power (system)
kW
5.74
8.29
9.45
12.2
11.1
11.0
Rated Full Load EER1,3 (system)
Btu/h
81,000
108,000
122,000
Nominal Heating Capacity2
Performance
Rated Heating Capacity
Btu/h
77,000
103,000
116,000
Rated Heating Input Power (system)
kW (Btu/h)
6.6
9.1
10.3
Rated Full Load COP2,3 (system)
3.4
3.3
3.3
Power
V/ph/Hz
208-230/3/60
208-230/3/60
208-230/3/60
Sound Pressure Level at 3ft.
dB(A)
58
58
60
Refrigerant Type and Quantity
(lbs.)
R-410A (18.1)
R-410A (19.8)
R-410A (20.1)
Liquid Pipe (Main Line)
in.
3/8 (Braze)
3/8 (Braze)
1/2 (Braze)
Suction Gas Pipe (Main Line)
in.
3/4 (Braze)
7/8 (Braze)
1-1/8 (Braze)
Refrigerant Piping Vertical Pipe Length (if unit is below FCU)
ft.
295
295
295
Vertical Pipe Length (if unit is above FCU)
ft.
164 (295 with Option)
164 (295 with Option)
164 (295 with Option)
Actual Pipe Length (Equivalent Length)
ft.
540 (620)
540 (620)
540 (620)
Total Pipe Length
ft.
3,280
3,280
3,280
Connectable Indoor Unit Ratio
%
50-130% as Standard (Up to 200% is permitted depending on application & fan coil unit selection)
Connection Ratio
Maximum Number of Indoor Units
Qty.
12
16
18
Weight
lbs.
560
560
560
Unit
Dimensions (H x W x D)
in.
66-1/8 x 36-5/8 x 30-1/8
66-1/8 x 36-5/8 x 30-1/8
66-1/8 x 36-5/8 x 30-1/8
Air Flow
cfm
6,530
6,530
7,060
Fan
External Static Pressure
in. W.G.
0.32
0.32
0.32
Fan Motor Output and Quantity
kW (Qty.)
0.75 x 1
0.75 x 1
0.75 x 1
Maximum Overcurrent Protection (MOP)
A
40
50
60
Minimum Circuit Amps (MCA)
A
36.1
36.1
41.3
Electrical
Minimum Starting Current (MSC)
A
131
131
132
Compressor Rated Load Amps (RLA)
A
14.2
7.8 + 16.8
12.2 + 16.8
Compressor Type
Daikin Scroll x 2
Daikin Scroll x 2
Daikin Scroll x 2
Compressor
Compressor Set-Up
1 INV + 1 FIX
1 INV + 1 FIX
1 INV + 1 FIX
Compressor Capacity Control
%
20 - 100
14 - 100
14 - 100
1 Indoor temp. : 80°FDB or 67°FWB / outdoor temp. : 95°FDB / Equivalent piping length : 25 ft (7.5 m), level difference : 0 ft.
2 Indoor temp. : 70°FDB / outdoor temp. : 47°FDB or 43°FWB / Equivalent piping length : 25 ft (7.5 m), level difference : 0 ft.
3 The tested system EER and COP values reflect “full load efficiency only and are the results from testing to the Alternate Test Method (ATM) guidelines
provided by the U.S. Department of Energy (DOE) in the Federal Register / Vol. 74, No. 68 / Friday April 8, 2009 / Notices / Pages 15955-15958
A B SO L U T E C O MF O RT
18
RXYQ72PATJ
RXYQ96PATJ
RXYQ108PATJ
DAIKIN AC
Double Module Systems
VRVIII 208-230V Heat Pump
Name
Model
Combination
12-Ton
14-Ton
16-Ton
18-Ton
20-Ton
RXYQ144PATJ
RXYQ168PATJ
RXYQ96PATJ +
RXYQ72PATJ
168,000
160,000
14.04
11.4
188,000
180,000
16.0
3.3
208-230/3/60
61
RXYQ192PATJ
RXYQ216PTJUR
RXYQ120PTJUR +
RXYQ96PATJ
216,000
206,000
19.43
10.60
243,000
232,000
21.25
3.2
208-230/3/60
62
RXYQ240PTJUR
RXYQ72PATJ x 2
Nominal Cooling Capacity
Rated Cooling Capacity
Rated Cooling Input Power (system)
Rated Full Load EER1,3 (system)
Nominal Heating Capacity2
Rated Heating Capacity
Rated Heating Input Power (system)
Rated Full Load COP2,3 (system)
Power
Sound Pressure Level at 3ft.
Btu/h
Btu/h
kW
RXYQ96PATJ x 2
RXYQ120PTJUR x 2
144,000
192,000
240,000
138,000
184,000
240,000
11.31
17.20
24.49
12.2
10.7
9.80
Btu/h
162,000
216,000
270,000
Performance
Btu/h
154,000
206,000
258,000
kW (Btu/h)
13.3
18.9
23.63
3.4
3.2
3.2
V/ph/Hz
208-230/3/60
208-230/3/60
208-230/3/60
dB(A)
61
62
63
R-410A (18.1 +
Refrigerant Type and Quantity
(lbs.)
R-410A (19.8+18.1)
R-410A (19.8+19.8)
R-410A (20.1+19.8) R-410A (20.1+20.1)
18.1)
Liquid Pipe (Main Line)
in.
1/2 (Braze)
5/8 (Braze)
5/8 (Braze)
5/8 (Braze)
5/8 (Braze)
Suction Gas Pipe (Main Line)
in.
1-1/8 (Braze)
1-1/8 (Braze)
1-1/8 (Braze)
1-1/8 (Braze)
1-3/8 (Braze)
in.
3/4 (Braze)
3/4 (Braze)
3/4 (Braze)
3/4 (Braze)
3/4 (Braze)
Refrigerant Piping High and Low Pressure Equalization Pipe
Vertical Pipe Length (if unit is below FCU)
ft.
295
295
295
295
295
Vertical Pipe Length (if unit is above FCU)
ft.
164 (295 with Option) 164 (295 with Option) 164 (295 with Option) 164 (295 with Option) 164 (295 with Option)
Actual Pipe Length (Equivalent Length)
ft.
540 (620)
540 (620)
540 (620)
540 (620)
540 (620)
Total Pipe Length
ft.
3,280
3,280
3,280
3,280
3,280
Connectable Indoor Unit Ratio
%
50-130% as Standard (Up to 200% is permitted depending on application & fan coil unit selection)
Connection Ratio
Maximum Number of Indoor Units
Qty.
25
29
33
37
41
Weight
lbs.
560 + 560
560 + 560
560 + 560
560 + 560
560 + 560
Unit
Dimensions (H x W x D)
in.
(66-1/8 x 36-5/8 x 30-1/8) x 2
Air Flow
cfm
6,530 + 6,530
6,530 + 6,530
6,530 + 6,530
7,060 + 6,530
7,060 + 7,060
Fan
External Static Pressure
in. W.G.
0.32
0.32
0.32
0.32
0.32
Fan Motor Output and Quantity
kW (Qty.)
0.75 x 2
0.75 x 2
0.75 x 2
0.75 x 2
0.75 x 2
Maximum Overcurrent Protection (MOP)
A
40 + 40
50 + 40
50 + 50
50 + 60
60 + 60
Minimum Circuit Amps (MCA)
A
36.1 + 36.1
36.1 + 36.1
36.1 + 36.1
41.3 + 36.1
41.3 + 41.3
Electrical
Minimum Starting Current (MSC)
A
137
137
138
154
155
(7.8 + 16.8) +
(12.2+ 16.8) +
(12.2 + 16.8) x 2
Compressor Rated Load Amps (RLA)
A
(14.2) x 2
(7.8 + 16.8) + 14.2
(7.8 + 16.8)
(7.8+ 16.8)
Compressor Type
Daikin Scroll x 4
Daikin Scroll x 4
Daikin Scroll x 4
Daikin Scroll x 4
Daikin Scroll x 4
Compressor
Compressor Set-Up
(1 INV + 1 FIX) x 2
(1 INV + 1 FIX) x 2
(1 INV + 1 FIX) x 2
(1 INV + 1 FIX) x 2
(1 INV + 1 FIX) x 2
Compressor Capacity Control
%
13 - 100
9 - 100
7 - 100
7 - 100
6 - 100
1
RXYQ144PATJ
RXYQ168PATJ
RXYQ192PATJ
RXYQ216PTJUR
RXYQ240PTJUR
A B SO L UT E C OM F O RT
1 Indoor temp. : 80°FDB or 67°FWB / outdoor temp. : 95°FDB / Equivalent piping length : 25 ft (7.5 m), level difference : 0 ft.
2 Indoor temp. : 70°FDB / outdoor temp. : 47°FDB or 43°FWB / Equivalent piping length : 25 ft (7.5 m), level difference : 0 ft.
3 The tested system EER and COP values reflect “full load efficiency only and are the results from testing to the Alternate Test Method (ATM) guidelines
provided by the U.S. Department of Energy (DOE) in the Federal Register / Vol. 74, No. 68 / Friday April 8, 2009 / Notices / Pages 15955-15958
VRVIII
DAIKIN AC
19
VRVIII Specifications
460V heat recovery
Single Module Systems
VRVIII 460V Heat Recovery
6-Ton
8-Ton
10-Ton
Model
Name
REYQ72PAYD
REYQ96PAYD
REYQ120PAYD
Nominal Cooling Capacity1
Btu/h
72,000
96,000
120,000
Rated Cooling Capacity
Btu/h
70,000
92,000
114,000
Rated Cooling Input Power (system)
kW
5.56
7.93
10.36
12.6
11.6
11.0
Rated Full Load EER1,3 (system)
Btu/h
81,000
108,000
135,000
Nominal Heating Capacity2
Performance
Rated Heating Capacity
Btu/h
77,000
103,000
130,000
Rated Heating Input Power (system)
kW (Btu/h)
6.4
8.9
11.5
Rated Full Load COP2,3 (system)
3.5
3.4
3.3
Power
V/ph/Hz
460/3/60
460/3/60
460/3/60
Sound Pressure Level at 3ft.
dB(A)
58
58
60
Refrigerant Type and Quantity
(lbs.)
R-410A (22.7)
R-410A (23.4)
R-410A (23.8)
Liquid Pipe (Main Line)
in.
3/8 (Braze)
3/8 (Braze)
1/2 (Braze)
Suction Gas Pipe (Main Line)
in.
3/4 (Braze)
7/8 (Braze)
1-1/8 (Braze)
High and Low Pressure Gas Pipe (Main line)
in.
5/8 (Braze)
3/4 (Braze)
3/4 (Braze)
Refrigerant Piping
Vertical Pipe Length (if unit is below FCU)
ft.
295
295
295
Vertical Pipe Length (if unit is above FCU)
ft.
164 (295 with Option)
164 (295 with Option)
164 (295 with Option)
Actual Pipe Length (Equivalent Length)
ft.
540 (620)
540 (620)
540 (620)
Total Pipe Length
ft.
3,280
3,280
3,280
Connectable Indoor Unit Ratio
%
50-130% as Standard (Up to 200% is permitted depending on application & fan coil unit selection)
Connection Ratio
Maximum Number of Indoor Units
Qty.
12
16
20
Weight
lbs.
732
732
732
Unit
Dimensions (H x W x D)
in.
66-1/8 x 51-3/16 x 30-1/8
66-1/8 x 51-3/16 x 30-1/8
66-1/8 x 51-3/16 x 30-1/8
Air Flow
cfm
6,700
6,700
7,410
Fan
External Static Pressure
in. W.G.
0.32
0.32
0.32
Fan Motor Output and Quantity
kW (Qty.)
0.35 x 2
0.35 x 2
0.35 x 2
Maximum Overcurrent Protection (MOP)
A
20
25
25
Minimum Circuit Amps (MCA)
A
16
20.4
20.5
Electrical
Minimum Starting Current (MSC)
A
65
65
65
Compressor Rated Load Amps (RLA)
A
2.4 + 7.0
4.2 + 7.0
6.0 + 6.8
Compressor Type
Daikin Scroll x 2
Daikin Scroll x 2
Daikin Scroll x 2
Compressor
Compressor Set-Up
1 INV + 1 FIX
1 INV + 1 FIX
1 INV + 1 FIX
Compressor Capacity Control
%
20 - 100
14 - 100
14 - 100
1 Indoor temp. : 80°FDB or 67°FWB / outdoor temp. : 95°FDB / Equivalent piping length : 25 ft (7.5 m), level difference : 0 ft.
2 Indoor temp. : 70°FDB / outdoor temp. : 47°FDB or 43°FWB / Equivalent piping length : 25 ft (7.5 m), level difference : 0 ft.
3 The tested system EER and COP values reflect “full load efficiency only and are the results from testing to the Alternate Test Method (ATM) guidelines
provided by the U.S. Department of Energy (DOE) in the Federal Register / Vol. 74, No. 68 / Friday April 8, 2009 / Notices / Pages 15955-15958
The Branch Selector units are used for VRVIII Heat Recovery applications.
Please refer to engineering data for details.
Branch Selector Units
Model Name
Power Supply
Total Capacity Index of Connectable Indoor Units
Maximum Number of Connectable Indoor Units
Casing
Dimensions (H x W x D)
BSVQ36PVJU
V/ph/Hz
Less than 36
5
in.
Sound Absorbing Thermal Insulation Material
Indoor
Unit
A B SO L U T E C O MF O RT
20
Piping
Connections Outdoor
Unit
REYQ72PAYD
REYQ96PAYD
REYQ120PAYD
DAIKIN AC
Liquid Pipes
Gas Pipes
Liquid Pipes
Suction Gas Pipes
Discharge Gas Pipes
in.
in.
in.
in.
in.
lbs.
8 1/8 x 15 1/4 x 12 13/16
BSVQ60PVJU
208-230/1/60
Less than 60
8
Galvanized Steel Plate
BSVQ96PVJU
Less than 96
8
8 1/8 x 15 1/4 x 12 13/16
8 3/16 x 15 5/16 x 12 13/16
Foamed Polyurethane,
Foamed Polyurethane,
Frame Resisting Needle Felt Frame Resisting Needle Felt
Foamed Polyurethane,
Frame Resisting Needle Felt
ø 3/8 (Braze) 1
ø 5/8 (Braze) 1
ø 3/8 (Braze)
ø 5/8 (Braze)
ø 1/2 (Braze)
26
ø 3/8 (Braze)
ø 5/8 (Braze) 2
ø 3/8 (Braze)
ø 5/8 (Braze) 2
ø 1/2 (Braze) 2
26
ø 3/8 (Braze)
ø 7/8 (Braze)
ø 3/8 (Braze)
ø 7/8 (Braze)
ø 3/4 (Braze)
33
Weight
Note:
1
In case of connecting with a 07-18 type indoor unit, match to the size of field pipe using the attached pipe.
(Connection between the attached pipe and the field pipe must be brazed.)
2
In case of connecting with indoor unit capacity index 54 or more and 60 or less, match the size of the field pipe using the
attached pipe.
(Connection between the attached pipe and the field pipe must be brazed.)
Double Module Systems
VRVIII 460V Heat Recovery
12-Ton
Name
REYQ144PAYD
14-Ton
16-Ton
18-Ton
20-Ton
REYQ168PAYD
REYQ192PAYD
REYQ216PYDNR
REYQ240PYDNR
Model
REMQ96PAYD +
REMQ120PYDNR +
Combination
REMQ72PAYD x 2
REMQ96PAYD x 2
REMQ120PYDNR x 2
REMQ72PAYD
REMQ96PAYDN
Btu/h
144,000
168,000
192,000
216,000
240,000
Nominal Cooling Capacity1
Rated Cooling Capacity
Btu/h
138,000
160,000
184,000
206,000
240,000
Rated Cooling Input Power (system)
kW
11.31
14.04
17.20
19.43
24.49
Rated Full Load EER1,3 (system)
12.2
11.4
10.7
10.60
9.80
Nominal Heating Capacity2
Btu/h
162,000
188,000
216,000
243,000
270,000
Performance
Rated Heating Capacity
Btu/h
154,000
180,000
206,000
232,000
258,000
Rated Heating Input Power (system)
kW (Btu/h)
13.3
16.0
18.9
21.25
23.63
Rated Full Load COP2,3 (system)
3.4
3.3
3.2
3.2
3.2
Power
V/ph/Hz
460/3/60
460/3/60
460/3/60
460/3/60
460/3/60
Sound Pressure Level at 3ft.
dB(A)
60
61
62
62
63
Refrigerant Type and Quantity
(lbs.)
R-410A (18.1+18.1) R-410A (19.8+18.1)
R-410A (19.8+19.8)
R-410A (20.1+19.8) R-410A (20.1+20.1)
Liquid Pipe (Main Line)
in.
1/2 (Braze)
5/8 (Braze)
5/8 (Braze)
5/8 (Braze)
5/8 (Braze)
Suction Gas Pipe (Main Line)
in.
1-1/8 (Braze)
1-1/8 (braze)
1-1/8 (Braze)
1-1/8 (Braze)
1-3/8 (Braze)
High and Low Pressure Gas Pipe (Main line)
in.
7/8 (Braze)
7/8 (Braze)
1-1/8 (Braze)
1-1/8 (Braze)
1-1/8 (Braze)
Refrigerant
High and Low Pressure Equalization Pipe
in.
3/4 (Braze)
3/4 (Braze)
3/4 (Braze)
3/4 (Braze)
3/4 (Braze)
Piping
Vertical Pipe Length (if unit is below FCU)
ft.
295
295
295
295
295
Vertical Pipe Length (if unit is above FCU)
ft.
164 (295 with Option) 164 (295 with Option) 164 (295 with Option) 164 (295 with Option) 164 (295 with Option)
Actual Pipe Length (Equivalent Length)
ft.
540 (620)
540 (620)
540 (620)
540 (620)
540 (620)
Total Pipe Length
ft.
3,280
3,280
3,280
3,280
3,280
%
50-130% as Standard (Up to 200% is permitted depending on application & fan coil unit selection)
Connection Connectable Indoor Unit Ratio
Ratio
Maximum Number of Indoor Units
Qty.
25
29
33
37
41
Weight
lbs.
463 + 463
573 + 463
573 + 573
573 + 573
573 + 573
Unit
Dimensions (H x W x D)
in.
(66-1/8 x 36-5/8 x 30-1/8) x 2
Air Flow
cfm
6,350 + 6,350
6,530 + 6,350
6,530 + 6,530
7,060 + 6,530
7,060 + 7,060
Fan
External Static Pressure
in. W.G.
0.32
0.32
0.32
0.32
0.32
Fan Motor Output and Quantity
kW (Qty.)
0.75 x 2
0.75 x 2
0.75 x 2
0.75 x 2
0.75 x 2
Maximum Overcurrent Protection (MOP)
A
25 + 25
25 + 25
25 + 25
25 + 30
30 + 30
Minimum Circuit Amps (MCA)
A
16.7 + 16.7
20.3 + 16.7
20.3 + 20.3
20.5 + 20.3
20.5 + 20.5
Electrical
Minimum Starting Current (MSC)
A
69
69
77
78
Compressor Rated Load Amps (RLA)
A
(7.1) x 2
(3.9 + 8.4) + 7.1
(3.9 + 8.4) + (3.9 + 8.4) (3.9 + 8.4) + (6.1 +8.4)
(6.1 + 8.4) x 2
Compressor Type
Daikin Scroll x 2
Daikin Scroll x 3
Daikin Scroll x 4
Daikin Scroll x 4
Daikin Scroll x 4
Compressor Compressor Set-Up
(1 INV) x 2
(1 INV + 1 FIX) + 1 INV
(1 INV + 1 FIX) x 2
(1 INV + 1 FIX) x 2
(1 INV + 1 FIX) x 2
Compressor Capacity Control
%
13 - 100
9 - 100
7 - 100
7 - 100
6 - 100
1 Indoor temp. : 80°FDB or 67°FWB / outdoor temp. : 95°FDB / Equivalent piping length : 25 ft (7.5 m), level difference : 0 ft.
2 Indoor temp. : 70°FDB / outdoor temp. : 47°FDB or 43°FWB / Equivalent piping length : 25 ft (7.5 m), level difference : 0 ft.
3 The tested system EER and COP values reflect “full load efficiency only and are the results from testing to the Alternate Test Method (ATM) guidelines
provided by the U.S. Department of Energy (DOE) in the Federal Register / Vol. 74, No. 68 / Friday April 8, 2009 / Notices / Pages 15955-15958
REYQ144PAYD
REYQ168PAYD
REYQ192PAYD
REYQ216PYDNR
REYQ240PYDNR
A B SO L UT E C OM F O RT
For Branch Selector unit specifications, refer to page 20.
VRVIII
DAIKIN AC
21
VRVIII Specifications
208-230V heat recovery
Single Module Systems
VRVIII 208-230V Heat Recovery
6-Ton
8-Ton
10-Ton
Model
Name
REYQ72PATJ
REYQ96PATJ
REYQ120PATJ
Nominal Cooling Capacity1
Btu/h
72,000
96,000
120,000
Rated Cooling Capacity
Btu/h
70,000
92,000
114,000
Rated Cooling Input Power (system)
kW
5.56
7.93
10.36
12.6
11.6
11.0
Rated Full Load EER1,3 (system)
Btu/h
81,000
108,000
135,000
Nominal Heating Capacity2
Performance
Rated Heating Capacity
Btu/h
77,000
103,000
130,000
Rated Heating Input Power (system)
kW (Btu/h)
6.4
8.9
11.5
Rated Full Load COP2,3 (system)
3.5
3.4
3.3
Power
V/ph/Hz
208-230/3/60
208-230/3/60
208-230/3/60
Sound Pressure Level at 3ft.
dB(A)
58
58
60
Refrigerant Type and Quantity
(lbs.)
R-410A (22.7)
R-410A (23.4)
R-410A (23.8)
Liquid Pipe (Main Line)
in.
3/8 (Braze)
3/8 (Braze)
1/2 (Braze)
Suction Gas Pipe (Main Line)
in.
3/4 (Braze)
7/8 (Braze)
1-1/8 (Braze)
High and Low Pressure Gas Pipe (Main Line)
in.
5/8 (Braze)
3/4 (Braze)
3/4 (Braze)
Refrigerant Piping
Vertical Pipe Length (if unit is below FCU)
ft.
295
295
295
Vertical Pipe Length (if unit is above FCU)
ft.
164 (295 with Option)
164 (295 with Option)
164 (295 with Option)
Actual Pipe Length (Equivalent Length)
ft.
540 (620)
540 (620)
540 (620)
Total Pipe Length
ft.
3,280
3,280
3,280
Connectable Indoor Unit Ratio
%
50-130% as Standard (Up to 200% is permitted depending on application & fan coil unit selection)
Connection Ratio
Maximum Number of Indoor Units
Qty.
12
16
20
Weight
lbs.
730
730
730
Unit
Dimensions (H x W x D)
in.
66-1/8 x 51-3/16 x 30-1/8
66-1/8 x 51-3/16 x 30-1/8
66-1/8 x 51-3/16 x 30-1/8
Air Flow
cfm
6,700
6,700
7,410
Fan
External Static Pressure
in. W.G.
0.32
0.32
0.32
Fan Motor Output and Quantity
kW (Qty.)
0.35 x 2
0.35 x 2
0.35 x 2
Maximum Overcurrent Protection (MOP)
A
40
45
50
Minimum Circuit Amps (MCA)
A
36.1
43.8
44.2
Electrical
Minimum Starting Current (MSC)
A
131
131
131
Compressor Rated Load Amps (RLA)
A
4.8 + 14.0
8.4 + 14.0
12.0 + 13.6
Compressor Type
Daikin Scroll x 2
Daikin Scroll x 2
Daikin Scroll x 2
Compressor
Compressor Set-Up
1 INV + 1 FIX
1 INV + 1 FIX
1 INV + 1 FIX
Compressor Capacity Control
%
20 - 100
14 - 100
14 - 100
1 Indoor temp. : 80°FDB or 67°FWB / outdoor temp. : 95°FDB / Equivalent piping length : 25 ft (7.5 m), level difference : 0 ft.
2 Indoor temp. : 70°FDB / outdoor temp. : 47°FDB or 43°FWB / Equivalent piping length : 25 ft (7.5 m), level difference : 0 ft.
3 The tested system EER and COP values reflect “full load efficiency only and are the results from testing to the Alternate Test Method (ATM) guidelines
provided by the U.S. Department of Energy (DOE) in the Federal Register / Vol. 74, No. 68 / Friday April 8, 2009 / Notices / Pages 15955-15958
For Branch Selector unit specifications, refer to page 20.
A B SO L U T E C O MF O RT
22
REYQ72PATJ
REYQ96PATJ
REYQ120PATJ
DAIKIN AC
Double Module Systems
VRVIII 208-230V Heat Recovery
Name
12-Ton
14-Ton
16-Ton
18-Ton
20-Ton
REYQ144PATJ
REYQ168PATJ
REYQ192PATJ
REYQ216PTJUR
REYQ240PTJUR
Model
REMQ96PATJ +
REMQ120PTJUR +
Combination
REMQ72PATJ x 2
REMQ96PATJ x 2
REMQ120PTJUR x 2
REMQ72PATJ
REMQ96PATJ
Nominal Cooling Capacity1
Btu/h
144,000
168,000
192,000
216,000
240,000
Rated Cooling Capacity
Btu/h
138,000
160,000
184,000
206,000
240,000
Rated Cooling Input Power (system)
kW
11.31
14.04
17.20
19.43
24.49
12.2
11.4
10.7
10.60
9.80
Rated Full Load EER1,3 (system)
Btu/h
162,000
188,000
216,000
243,000
270,000
Nominal Heating Capacity2
Performance
Rated Heating Capacity
Btu/h
154,000
180,000
206,000
232,000
258,000
Rated Heating Input Power (system)
kW (Btu/h)
13.3
16.0
18.9
21.25
23.63
Rated Full Load COP2,3 (system)
3.4
3.3
3.2
3.2
3.2
Power
V/ph/Hz
208-230/3/60
208-230/3/60
208-230/3/60
208-230/3/60
208-230/3/60
Sound Pressure Level at 3ft.
dB(A)
61
61
62
62
63
Refrigerant Type and Quantity
(lbs.)
R-410A (18.1+18.1) R-410A (19.8+18.1)
R-410A (19.8+19.8)
R-410A (20.1+19.8) R-410A (20.1+20.1)
Liquid Pipe (Main Line)
in.
1/2 (Braze)
5/8 (Braze)
5/8 (Braze)
5/8 (Braze)
5/8 (Braze)
Suction Gas Pipe (Main Line)
in.
1-1/8 (Braze)
1-1/8 (braze)
1-1/8 (Braze)
1-1/8 (Braze)
1-3/8 (Braze)
High and Low Pressure Gas Pipe (Main Line)
in.
7/8 (Braze)
7/8 (Braze)
1-1/8 (Braze)
1-1/8 (Braze)
1-1/8 (Braze)
Refrigerant
High and Low Pressure Equalization Pipe
in.
3/4 (Braze)
3/4 (Braze)
3/4 (Braze)
3/4 (Braze)
3/4 (Braze)
Piping
Vertical Pipe Length (if unit is below FCU)
ft.
295
295
295
295
295
Vertical Pipe Length (if unit is above FCU)
ft.
164 (295 with Option) 164 (295 with Option) 164 (295 with Option) 164 (295 with Option) 164 (295 with Option)
Actual Pipe Length (Equivalent Length)
ft.
540 (620)
540 (620)
540 (620)
540 (620)
540 (620)
Total Pipe Length
ft.
3,280
3,280
3,280
3,280
3,280
%
50-130% as Standard (Up to 200% is permitted depending on application & fan coil unit selection)
Connection Connectable Indoor Unit Ratio
Ratio
Maximum Number of Indoor Units
Qty.
25
29
33
37
41
Weight
lbs.
450 + 450
560 + 450
560 + 560
560 + 560
560 + 560
Unit
Dimensions (H x W x D)
in.
(66-1/8 x 36-5/8 x 30-1/8) x 2
Air Flow
cfm
6,350 + 6,350
6,530 + 6,350
6,530 + 6,530
7,060 + 6,530
7,060 + 7,060
Fan
External Static Pressure
in. W.G.
0.32
0.32
0.32
0.32
0.32
Fan Motor Output and Quantity
kW (Qty.)
0.75 x 2
0.75 x 2
0.75 x 2
0.75 x 2
0.75 x 2
Maximum Overcurrent Protection (MOP)
A
40 + 40
50 + 40
50 + 50
60 + 50
60 + 60
Minimum Circuit Amps (MCA)
A
36.1 + 36.1
36.1 + 36.1
36.1 + 36.1
41.3 + 36.1
41.3 + 41.3
Electrical
Minimum Starting Current (MSC)
A
137
138
154
155
(12.2+ 16.8) +
Compressor Rated Load Amps (RLA)
A
14.2 + 14.2
(7.8 + 16.8) + 14.2
(7.8 + 16.8) x 2
(12.2 + 16.8) x 2
(7.8+ 16.8)
Compressor Type
Daikin Scroll x 1
Daikin Scroll x 3
Daikin Scroll x 4
Daikin Scroll x 4
Daikin Scroll x 4
Compressor Compressor Set-Up
(1 INV) x 2
(1 INV + 1 FIX) + 1 INV
(1 INV + 1 FIX) x 2
(1 INV + 1 FIX) x 2
(1 INV + 1 FIX) x 2
Compressor Capacity Control
%
13 - 100
9 - 100
7 - 100
7 - 100
6 - 100
1 Indoor temp. : 80°FDB or 67°FWB / outdoor temp. : 95°FDB / Equivalent piping length : 25 ft (7.5 m), level difference : 0 ft.
2 Indoor temp. : 70°FDB / outdoor temp. : 47°FDB or 43°FWB / Equivalent piping length : 25 ft (7.5 m), level difference : 0 ft.
3 The tested system EER and COP values reflect “full load efficiency only and are the results from testing to the Alternate Test Method (ATM) guidelines
provided by the U.S. Department of Energy (DOE) in the Federal Register / Vol. 74, No. 68 / Friday April 8, 2009 / Notices / Pages 15955-15958
REYQ144PATJ
REYQ168PATJ
REYQ192PATJ
REYQ216PTJUR
REYQ240PTJUR
A B SO L UT E C OM F O RT
For Branch Selector unit specifications, refer to page 20.
VRVIII
DAIKIN AC
23
VRVIII Installation Space
Standard supplied accessories
Figure 1
Confirm the following accessories are included. The storage
location of the accessories is shown in figure 1. (Refer to figure 1)
1. Clamps, Manuals, etc.
2. Accessory pipes
1
2
Installation Space Examples
n
Figure 2
n
If installed as a single unit
(Pattern 1)
≥11 3/4
4
1
≥ 3/8
≥ 3/8
When installed in serial
(Pattern 1)
4
≥ 19 5/8
≥ 3/8
3
≥ 3 7/8
(Pattern 2)
1
≥2
(Pattern 3)
≥ 3/4
≥ 3 7/8
≥ 11 3/4
≥ 7 7/8
≥15 3/4
h2
Front side
Suction side
59
(19 5/8 + )
+
(Service
)
space
h2
2
1
or more
19 5/8
Figure 3
1
2
3
≥ 40
≥ 40
4
≥ 60
≥ 60
5
≥ 60
(in.)
A B SO L U T E C O MF O RT
24
For detailed instructions please refer to proper
Installation Manual
DAIKIN AC
≥15 3/4
h1
h2
2
or more
≥ 60 ≥ 40
≥2
2
1
n
≥ 19 5/8
3
1
(Pattern 3)
2
≥ 3/8
4
≥ 3 7/8
3
≥ 11 3/4
≥ 7 7/8
1
≥ 3 7/8
≥2
≥ 19 5/8
2
≥ 3/4
(Pattern 2)
4
≥2
≥11 3/4
n
≥ 19 5/8
3
n
T he installation space requirement shown in figure 2 is a
reference for cooling.
During installation, install the units using the most
appropriate of the patterns shown in figure 2 for the
location in question, taking into consideration human traffic
and wind.
If the number of units installed is more than that shown in
the pattern in figure 2, install the units that there is no air
short cuircuting.
As regards to space in front of the unit, consider the space
needed for the refrigerant piping when installing the units,
as determined by local codes.
If the space requirements in figure 2 do not apply, contact
your contractor or Daikin directly. (Refer to figure 2)
1. Front side
2. No limit to wall height
3. Service space of front side
4. Service space of suction side
For Patterns 1 and 2 in figure 2:
n Wall height for front side – no higher than 59 in.
n Wall height on the suction side – no higher than 19-5/8 in.
n Wall height for sides – no limit.
n If the height is exceeded the above, calculate h1 and h2
shown in the figure below, and add h2/2 to the service space
of front side and h1/2 to the service space of suction side.
An inverter unit may cause electronic noise generated from
AM broadcasting. Examine where to install the main unit and
electric wires, keeping proper distances away from stereo
equipment, personal computers, etc. Particularly for locations
with weak reception, ensure there is a distance of at least
10 ft for indoor remote controllers, place power wiring and
transmission wiring in conduits, and ground the conduits.
(Refer to figure 3)
1. Indoor unit
2. Branch switch, overcurrent breaker
3. Remote controller
4. COOL/HEAT selector
5. Personal computer or radio
VRVIII Accessories
VRVIII Heat Recovery - 208-230V and 460V
Unit Model Number
REYQ144PAYD
REYQ144PATJ
REYQ168PAYD
REYQ168PATJ
REYQ192PAYD
REYQ192PATJ
REYQ96PAYD
REYQ96PATJ
REYQ120PAYD
REYQ120PATJ
REYQ72PAYD
REYQ72PATJ
REFNET Header
KHRP25M33H
(max. 8 branches)
KHRP25M33H
(max. 8 branches)
KHRP25M72H
(max. 8 branches)
REFNET Joint
KHRP25A22T
KHRP25A33T
KHRP25A22T
KHRP25A33T
KHRP25M72TU
Outdoor Unit multi piping connection kit
REYQ216PYNDR
REYQ216PTJUR
REYQ240PYNDR
REYQ240PTJUR
KHRP25M33H
(max. 8 branches)
KHRP25M72H
(max. 8 branches)
KHRP25M73HU
(max. 8 branches)
KHRP25A22T
KHRP25A33T
KHRP25M72TU
KHRP25M73TU
BHFP26P90U
BSVQ36PVJU
BSVQ60PVJU
BSVQ96PVJU
PCB REYQ_PYDN
PCB REYQ_PTJU
Branch Selector box for Heat Recovery
Increase height difference between indoor
and outdoor unit to 295ft.
VRVIII Heat Pump - 208-230V and 460V
Unit Model Number
RXYQ72PAYD
RXYQ72PATJ
RXYQ96PAYD
RXYQ96PATJ
REFNET Header
KHRP26M22H
(max. 4 branches)
KHRP26M33H
(max. 8 branches)
KHRP26M22H
(max. 4 branches)
KHRP26M33H
(max. 8 branches)
KHRP26M72H
(max. 8 branches)
REFNET Joint
KHRP26A22T
KHRP26A33T
KHRP26A22T
KHRP26A33T
KHRP26M72TU
Outdoor Unit multi piping connection kit
Increase height difference between indoor
and outdoor unit to 295ft.
Name of Options
Cool/Heat Selector
Fixing Box
RXYQ108PAYD
RXYQ108PATJ
-
RXYQ192PAYD
RXYQ192PATJ
RXYQ216PYDNR
RXYQ216PTJUR
RXYQ240PYDNR
RXYQ240PTJUR
KHRP26M22H
(max. 4 branches)
KHRP26M33H
(max. 8 branches)
KHRP26M72H
(max. 8 branches)
KHRP26M73HU
(max. 8 branches)
KHRP26A22T
KHRP26A33T
KHRP26M72TU
KHRP26M73TU
BHFP22P100U
PCB RXYQ_PYDN
PCB RXYQ_PTJU
BSVQ36PVJU
BSVQ60PVJU
KRC19-26A
KJB111A
A B SO L UT E C OM F O RT
BSVQ
No.
1
1-1
RXYQ144PAYD
RXYQ144PATJ
RXYQ168PAYD
RXYQ168PATJ
BSVQ96PVJU
VRVIII
DAIKIN AC
25
VRV Controls
Choosing the right controls
Unless it is controlled, managed and operated in an appropriate manner, a high-performing
system will not be able to provide the energy-efficiency or comfort it claims. Promoting the
systemization of control management not only improves efficiency, but also represents a
number of possibilities in terms of convenience. Daikin’s line up of intelligent controls gives
the user the ability to address all needs in one package and one supplier: Daikin.
Daikin controls are optimized for VRV technology and offers highly scalable solutions for all applications and
budgets. It also allows for lower cost alternatives to traditional energy management systems when centralized
control is required.
Project Requirements
Daikin VRV Controls
BRC1E71
Navigation
BRC2A71
Simplified
DCS302C71
Centralized
Simple individual zone control
Individual zone control with 7-day programmable scheduling
Multi-zone control without scheduling functions
Basic central point on/off control of all air handling units
Advanced multi-zone control of small to medium size projects
Advanced multi-zone control of large commercial projects
Advanced multi-zone control with scheduling logic and calender
Automatic cooling/heating changeover for heat pump systems
Single input batch shutdown of all connected air handlers
Web browser control and monitoring via Intranet and Internet
E-mail notification of system alarms and equipment malfunctions
Multiple tenant power billing for shared condenser applications
Temperature set-point range restrictions
Graphical user interface based upon a PC platform
Start/stop control of ancillary building systems1
Daikin VRV integration with BACnet based automation systems
Daikin VRV integration with LonWorks based automation systems
A B SO L U T E C O MF O RT
26
1
Requires one or more DEC102A51-US2 Digital Input/Output units.
Native application or feature for this device.
Dependent upon capabilities of the third party energy management system.
DAIKIN AC
DCS301C71
Unified
DCS601C71
Intelligent Touch
Intelligent
Manager
BACnet
Interface
LonWorks
Interface
Controls that offer freedom to administrators
Freedom to control the air-conditioning system, via the Internet, from home or any other location with a PC.
Should a malfunction occur, a notification is sent by e-mail to a cell phone or PC (any e-mail address specified by
the user). This gives administrators the freedom to leave the room/building where the controller is located.
DCS601C71
IMP-128/256/512/768/1,024
n 64
n1,024
groups (128 indoor units) connectable
(128 groups with DCS601A72)
n Management of Daikin units and ancillary equipment
n Touch screen display
n Built-in Ethernet port, Web enabled (optional)
n Alarm e-mail function
indoor units
(organized in up to 200 control groups)
nManagement of Daikin units and ancillary equipment
nOperation on one master PC and one sub PC
(sub PC option)
nRemote monitoring via the Web
nAlarm e-mail function
Connect VRV to your BMS via BACnet® or LonWorks® using Daikin’s integrated control system solutions.
Compatible with BACnet and LonWorks, the two leading open network communication protocols, the interfaces
offered by Daikin provides a seamless connection between VRV and your BMS.
LonWorks®
LonWorks Network Compatible Interface
BACnet Network Compatible Interface
Interface for LonWorks networks
nCommunication via LON protocol (twisted pair wire)
n 64 units connectable per interface
n Unlimited site size
n Quick, easy installation
nInterface
for Building Management Systems
via BACnet protocol (BACnet/IP)
n256 units connectable per BACnet gateway
(with DAM411B51)
nUnlimited site size
nQuick, easy installation
nCommunication
A B SO L UT E C OM F O RT
n
VRVIII
DAIKIN AC
27
WARNINGS:
•Always use a licensed installer or contractor to install this product. Do not try to install the product yourself. Improper installation can
result in water or refrigerant leakage, electrical shock, fire or explosion.
•Use only those parts and accessories supplied or specified by Daikin. Ask a licensed contractor to install those parts and accessories.
Use of unauthorized parts and accessories or improper installation of parts and accessories can result in water or refrigerant leakage,
electrical shock, fire or explosion.
•Read the User’s Manual carefully before using this product. The User’s Manual provides important safety instructions and warnings.
Be sure to follow these instructions and warnings.
For any inquiries, contact your local Daikin sales office.
In all of us,
a green heart
© 2010 Daikin Industries, Limited.
Daikin, Daikin AC Absolute Comfort, and its design, VRV and REFNET ™ are trademarks pending or registered trademarks of Daikin Industries, Limited. All rights reserved. LonWorks and LON are
registered trademarks of Echelon Corporation. BACnet is a Data Communication Protocol for Building Automation and Control Networks, developed under the auspices of the American Society of Heating,
Refrigerating and Air-Conditioning Engineers (ASHRAE).
®
®
®
®
®
®
Organization:
DAIKIN INDUSTRIES, LTD.
AIR CONDITIONING MANUFACTURING DIVISION
JMI-0107
Scope of Registration:
THE DESIGN/DEVELOPMENT AND MANUFACTURE
OF COMMERCIAL AIR CONDITIONING, HEATING,
COOLING, REFRIGERATING EQUIPMENT,
COMMERCIAL HEATING EQUIPMENT, RESIDENTIAL
AIR CONDITIONING EQUIPMENT, HEAT RECLAIM
VENTILATION, AIR CLEANING EQUIPMENT,
MARINE TYPE CONTAINER REFRIGERATION UNITS,
COMPRESSORS AND VALVES.
Organization:
DAIKIN INDUSTRIES
(THAILAND) LTD.
Scope of Registration:
THE DESIGN/DEVELOPMENT
AND MANUFACTURE OF AIR
CONDITIONERS AND THE
COMPONENTS INCLUDING
COMPRESSORS USED FOR THEM.
All of the Daikin Group's business
facilities and subsidiaries in Japan
are certified under the ISO 14001
International standard for
environmental management.
JQA-1452
Daikin AC (Americas), Inc.
Dealer Information
PCVUSE10-08B
Daikin’s products are subject to continuous improvements. Daikin reserves the right to modify product design, specifications and information in
this brochure without notice and without incurring any obligations.
DAIKIN AC
A B SO L UT E C OM F O RT
1645 Wallace Drive, Suite 110
Carrollton, TX 75006 USA
www.daikinac.com
info@daikinac.com
866-4DAIKIN
972-245-1510
28
Download PDF

advertising