Architects and Engineers Specifications for Microphone Shock Mount SM 75

Architects and Engineers Specifications for Microphone Shock Mount SM 75
Architects and Engineers Specifications for Microphone Shock Mount SM 75
The shock absorbing microphone mount shall be for permanent fixing above or below the surface. It shall have an
overall diameter of 75 mm/ 2.95” and be supplied with a female XLR and a conversion adaptor for 3/8” BSW or 10 mm
screw fittings. The finish of the microphone shock mount shall be satin black.
The microphone shock mount shall be a clockaudio SM 75.
ø 71.00 mm / 2.8"
10.00 mm / 0.39"
3.00 mm / 0.12"
24.00 mm / 0.94"
ø 25.00 mm / 0.98"
71.00 mm / 2.8"
7.00 mm / 0.28"
ø 4.00 mm / 0.16"
77.5 mm / 3.05"
Under Table Installation
TABLE
NOTE: FOR INSTALLATION A HOLE OF 25.4 mm/ 1” IN DIAMETER SHOULD BE DRILLED.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement