Acer | P1165EP | User`s guide | Acer P1165EP User`s guide

Acer Projector
P5260E/P5260EP/P1165E/P1165EP Series
User's Guide
Downloaded From projector-manual.com Acer Manuals
Copyright © 2007. Acer Incorporated.
All Rights Reserved.
Acer Projector P5260E/P5260EP/P1165E/P1165EP Series User's Guide
Original Issue: 10/2007
Changes may be made periodically to the information in this publication without obligation
to notify any person of such revisions or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.
Record the model number, serial number, purchase date and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your computer. All correspondence concerning your unit should include the serial
number, model number and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronically, mechanically, by photocopy, recording or otherwise,
without the prior written permission of Acer Incorporated.
Acer Projector P5260E/P5260EP/P1165E/P1165EP Series
Model number: __________________________________
Serial number: ___________________________________
Date of purchase: ________________________________
Place of purchase: ________________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies'
product names or trademarks are used herein for identification purposes only and belong to
their respective companies.
“HDMI, the HDMI logo and High Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.“
Downloaded From projector-manual.com Acer Manuals
iii
Information for your safety and
comfort
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to
the external power supply unit:
•
•
•
Install the power supply unit before connecting the power cord to the AC
power outlet.
Unplug the power cord before removing the power supply unit from the
computer.
If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the
electrical outlet.
Warnings!
•
•
•
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat register, or
in a built-in installation unless proper ventilation is provided.
•
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
Downloaded From projector-manual.com Acer Manuals
iv
•
•
the product.
To avoid damage of internal components and to prevent battery leakage,
do not place the product on a vibrating surface.
Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage rotor
devices, lamp.
Using electrical power
•
•
•
•
•
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
This product's AC adapter is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The grounding pin is a safety feature. Using a power outlet that is
not properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected
noise produced by other nearby electrical devices that may interfere with
the performance of this product.
•
Use the product only with the supplied power supply cord set. If you need
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, type
SPT-2, rated 7A 125V minimum, VDE approved or its equivalent, 4.6 meters
(15 feet) maximum length.
Downloaded From projector-manual.com Acer Manuals
v
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
•
•
•
•
•
•
the power cord or plug is damaged, cut or frayed
liquid was spilled into the product
the product was exposed to rain or water
the product has been dropped or the case has been damaged
the product exhibits a distinct change in performance, indicating a need
for service
the product does not operate normally after following the operating
instructions
Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
Warning! For safety reasons, do not use non-compliant parts when adding
or changing components. Consult your reseller for purchase options.
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
Additional safety information
•
•
•
Do not look into the projector's lens when the lamp is on. The bright may
hurt your eyes.
Turn on the projector first and then signal sources.
Do not place the product in following environments:
•
•
•
•
Space that is poorly ventilated or confined. At least 50cm clearance from walls
and free flow of air around the projector is necessary.
Locations where temperatures may become excessively high, such as inside of a
car with all windows rolled up.
Locations where excessive humidity, dust, or cigarette smoke may contaminate
optical components, shortening the life span and darkening the image.
•
Locations near fire alarms.
•
•
Locations with an ambient temperature above 40 ºC/104 ºF.
Locations where the altitudes are higher than 10000 feet.
Unplug immediately if there is something wrong with your projector. Do
not operate if smoke, strange noise or odor comes out of your projector. It
Downloaded From projector-manual.com Acer Manuals
vi
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
might cause fire or electric shock. In this case, unplug immediately and
contact your dealer.
Do not keep using this projector if it is broken or you have dropped it. In
this case, contact your dealer for inspection.
Do not face the projector lens to the sun. It can lead to fire.
When switching the projector off, please ensure the projector completes
its cooling cycle before disconnecting power.
Do not turn off the main power abruptly or unplug the projector during
operation. It can lead to lamp breakage, fire, electric shock or other
trouble. The best way is to wait for the fan to turn off before turning main
power off.
Do not touch air outlet grille and bottom plate which becomes hot.
Clean the air filter frequently. The temperature inside may rise and cause
damage when the filter/ventilation slots clogged with dirt or dust.
Do not look into the air outlet grille when projector is operating. It may
hurt your eyes.
Always open the lens shutter or remove the lens cap when the projector is
on.
Do not block the projector lens with any object when the projector is
under operation as this could cause the object to become heated and
deformed or even cause a fire. To temporarily turn off the lamp, press HIDE
on the projector or remote controller.
The lamp becomes extremely hot during operation. Allow the projector to
cool for approximately 45 minutes prior to removing the lamp assembly for
replacement.
Do not operate lamps beyond the rated lamp life. It could cause it to break
on rare occasions.
Never replace the lamp assembly or any electronic components unless the
projector is unplugged.
The product will detect the life of the lamp itself. Please be sure to change
the lamp when it shows warning message.
When changing the lamp, please allow unit to cool down, and follow all
changing instructions.
Reset the "Lamp Hour Reset" function from the onscreen display
"Management" menu after replacing the lamp module.
Do not attempt to disassemble this projector. There are dangerous high
voltages inside which may hurt you. The only user serviceable part is the
lamp which has its own removable cover. Refer servicing only to suitable
qualified professional service personnel.
Do not stand the projector on end vertically. It may cause the projector to
fall over, causing injury or damage.
This product is capable of displaying inverted images for ceiling mount
installation. Only use acer ceiling mount kit for mounting the projector
and ensure it is securely installed.
Downloaded From projector-manual.com Acer Manuals
vii
Operating environment for using wireless (optional)
Warning! For safety reasons, turn off all wireless or radio transmitting
devices when using your machine under the following conditions. These
devices may include, but are not limited to: wireless LAN (WLAN), Bluetooth
and/or 3G.
Remember to follow any special regulations in force in any area, and always
switch off your device when its use is prohibited or when it may cause
interference or danger. Use the device only in its normal operating positions.
This device meets RF exposure guidelines when used normally, and it and its
antenna are positioned at least 1.5 centimeters (5/8 inches) away from your
body (refer to the figure below). It should not contain metal and you should
position the device the above-stated distance from your body.
To successfully transmit data files or messages, this device requires a good
quality connection to the network. In some cases, transmission of data files or
messages may be delayed until such a connection is available.
Ensure that the above separation distance instructions are followed until the
transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the
device, and persons with hearing aids should not hold the device to the ear with
the hearing aid. Do not place credit cards or other magnetic storage media near
the device, because information stored on them may be erased.
Medical devices
Operation of any radio transmitting equipment, including wireless phones, may
interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any
questions. Switch off your device in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to external RF transmissions.
Pacemakers. Pacemaker manufacturers recommend that a minimum separation
of 15.3 centimeters (6 inches) be maintained between wireless devices and a
pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with pacemakers
should do the following:
•
•
Always keep the device more than 15.3 centimeters (6 inches) from the
pacemaker.
Not carry the device near your pacemaker when the device is switched on.
If you suspect interference, switch off your device, and move it.
Downloaded From projector-manual.com Acer Manuals
viii
Hearing aids. Some digital wireless devices may interfere with some hearing
aids. If interference occurs, consult your service provider.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer, or its
representative, of your vehicle or any equipment that has been added. Only
qualified personnel should service the device, or install the device in a vehicle.
Faulty installation or service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly that all wireless
equipment in your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same compartment
as the device, its parts, or enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the air bag or in the
air bag deployment area. If in-vehicle wireless equipment is improperly
installed, and the air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device
before boarding an aircraft. The use of wireless teledevices in an aircraft may be
dangerous to the operation of the aircraft, disrupt the wireless telephone
network, and may be illegal.
Potentially explosive environments
Switch off your device when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Potentially explosive
atmospheres include areas where you would normally be advised to turn off
your vehicle engine. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death. Switch off the device at refueling points
such as near gas pumps at service stations. Observe restrictions on the use of
radio equipment in fuel depots, storage, and distribution areas; chemical plants;
or where blasting operations are in progress. Areas with a potentially explosive
atmosphere are often, but not always, clearly marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where the air contains
chemicals or particles such as grain, dust or metal powders.
Hearing Protection
To protect your hearing, follow these instructions.
•
•
•
•
•
Increase the volume gradually until you can hear clearly and comfortably.
Do not increase the volume level after your ears have adjusted.
Do not listen to music at high volumes for extended periods.
Do not increase the volume to block out noisy surroundings.
Decrease the volume if you can't hear people speaking near you.
Downloaded From projector-manual.com Acer Manuals
ix
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please
recycle. For more information on the Waste from Electrical and Electronics
Equipment (WEEE) regulations, visit http://global.acer.com/about/
sustainability.htm.
Mercury advisory
For projectors or electronic products containing an LCD/CRT monitor or display:
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal
information, check www.lamprecycle.org.
Downloaded From projector-manual.com Acer Manuals
x
First things first
Usage Notes
Do:
•
Turn off the product before cleaning.
•
Use a soft cloth moistened with mild detergent to clean the display
housing.
•
Disconnect the power plug from AC outlet if the product is not being used
for a long period of time.
Don't:
•
Block the slots and openings on the unit provided for ventilation.
•
Use abrasive cleaners, waxes or solvents to clean the unit.
•
Use under the following conditions:
•
•
•
•
In extremely hot, cold or humid environments.
In areas susceptible to excessive dust and dirt.
Near any appliance that generates a strong magnetic field.
Place in direct sunlight.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user's guide to maximize the life of your unit.
Warning:
•
•
Do not look into the projector's lens when the lamp is on. The bright light may hurt
your eyes.
To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
•
•
Please do not open or disassemble the product as this may cause electric shock.
•
This product will detect the life of the lamp itself. Please be sure to change the lamp
when it shows warning messages.
•
Reset the "Lamp Hour Reset" function from the onscreen display "Management"
menu after replacing the lamp module.
•
When switching the projector off, please ensure the projector completes its cooling
cycle before disconnecting power.
•
•
•
Turn on the projector first and then the signal sources.
When changing the lamp, please allow unit to cool down, and follow all changing
instructions.
Do not use lens cap when projector is in operation.
When the lamp reaches the end of its life, it will burn out and may make a loud
popping sound. If this happens, the projector will not turn back on until the lamp
module has been replaced. To replace the lamp, follow the procedures listed under
"Replacing the Lamp".
Downloaded From projector-manual.com Acer Manuals
First things first
iii
x
Usage Notes
x
Precautions
x
Introduction
1
Product Features
1
Contents
2
Projector Overview
3
Projector Outlook
3
Control Panel
4
Remote Control Layout
5
Getting Started
7
Connecting the Projector
7
Turning the Projector On/Off
8
Turning On the Projector
8
Turning Off the Projector
9
Adjusting the Projected Image
10
Adjusting the Height of Projected Image
10
How to Optimize Image Size and Distance
11
How to Get a Preferred Image Size by Adjusting
Distance and Zoom
User Controls
13
15
Acer Empowering Technology
15
Onscreen Display (OSD) Menus
16
Color Setting
17
Image Setting
18
Management Setting
20
Audio Setting
23
Language Setting
24
Appendices
25
Troubleshooting
25
LED & Alarm Definition Listing
29
Downloaded From projector-manual.com Acer Manuals
Contents
Information for your safety and comfort
Replacing the Lamp
30
Ceiling Mount Installation
31
Specifications
34
Compatibility Modes
36
Regulations and Safety Notices
Downloaded From projector-manual.com Acer Manuals
41
1
Product Features
This product is a single-chip DLP® projector. Outstanding features include:
•
DLP® technology
•
P5260E/P5260EP: Native 1024 x 768 XGA resolution
P1165E/P1165EP: Native 800 x 600 SVGA resolution
4:3 / 16:9 aspect ratio supported
•
ColorBoost technology provides optimized colour performance that
delivers vivid and life-like pastel images
•
An outstanding brightness level of 2800 ANSI Lumens and a 2100:1
contrast ratio
•
Versatile display modes (Bright, Standard, Video, Blackboard, User 1, User
2) for optimum performance in any situation
•
NTSC/PAL/SECAM compatible and HDTV (720p, 1080i) supported
•
Top-loading lamp location for easy lamp replacement
•
Lower power consumption and economy (ECO) mode extends lamp life to
5000 hours
•
The EMPOWERING KEY reveals Acer Empowering functions (eView,
eTimer, eOpening) for easy adjustment of settings
•
P5260E/P5260EP: Equipped with DVI and HDMI™ connection supporting
HDCP
P1165E/P1165EP: Equipped with DVI connection supporting HDCP
•
Advanced digital keystone correction delivers optimum presentations
•
Multi-language onscreen display (OSD) menus
•
Full-function remote control
•
Manual focus projection lens zooms up to 1.1x
•
2x digital zoom and pan function
•
Microsoft® Windows® 2000, XP, Vista OS compliant
Downloaded From projector-manual.com Acer Manuals
English
Introduction
English
2
Contents
This projector comes with all the items shown below. Check to make sure your
unit is complete. Contact your dealer immediately if anything is missing.
Projector with lens cap
Power cord
VGA cable
Composite video cable
2 x batteries
Carrying case
DVI-D cable
(P5260E Series)
Security card
User’s Guide
Acer Projector
QhVq
QhEo
Quick Start Guide
Remote control
Downloaded From projector-manual.com Acer Manuals
Quick start guide
3
English
Projector Overview
Projector Outlook
Front / upper side
8
3
1
3
2
3
4
5
7
6
#
1
Description
#
Zoom ring
5
Description
Lens cap
2
Focus ring
6
Elevator button
3
Remote control receiver
7
Elevator foot
4
Zoom lens
8
Control panel
Rear side
1 2
13
3
4
12
5
6 7
8
10
9 11
#
Description
#
Description
1
USB connector
8
Audio input connector (1)
2
RS232 connector
9
Kensington lock port
3
PC analog signal/HDTV/Component
video input connector (1)
10 Power socket
4
Monitor loop-through output
connector (VGA-Out)
Below items are for P5260E/P5260EP series
only:
5
DVI input connector (for digital signal
with HDCP function)
11 Audio input connector (2)
6
S-Video input connector
12 HDMI connector
7
Composite video input connector
13 PC analog signal/HDTV/Component
video input connector (2)
Downloaded From projector-manual.com Acer Manuals
English
4
Control Panel
2
1
3
4
9
5
8
6
7
#
Function
Description
1
LAMP
Lamp Indicator LED
2
EMPOWERING KEY
Unique Acer functions: eOpening, eView,
eTimer Management.
3
TEMP
Temp Indicator LED
4
Keystone
Adjusts the image to compensate for
distortion caused by tilting the projector
(±40 degrees).
5
RESYNC
Automatically synchronizes the projector to
the input source.
6
Four directional select keys
Use
to select items or
make adjustments to your selection.
7
POWER
See the contents in "Turning the Projector
On/Off" section.
8
MENU
•
Press "MENU" to launch the onscreen
display (OSD) menu, back to the
previous step for the OSD menu
operation or exit the OSD menu.
•
Confirm your selection of items.
9
SOURCE
Downloaded From projector-manual.com Acer Manuals
Press "SOURCE" to choose RGB,
Component, S-Video, Composite, DVI, HDTV
and HDMI sources.
5
1
2
3
4
5
6
POWER
7
FREEZE
HIDE
8
RESYNC
ASPECT
RATIO
SOURCE
9
11
ZOOM
10
12
13
RGB
15
16
19
20
23
24
27
#
Icon
Function
BRIGHTNESS
COLOR
CONTRAST
PgUp
PgDn
VGA
DVI
COMPONENT
HDMI
VIDEO
S-VIDEO
WIRELESS
MUTE
14
17
18
21
22
25
26
Description
1
Infrared
transmitter
Sends signals to the projector.
2
Laser pointer
Aim the remote at the viewing screen.
3
FREEZE
To pause the screen image.
4
HIDE
Momentarily turns off the video. Press "HIDE" to hide the
image; press again to display the image.
5
RESYNC
Automatically synchronizes the projector to the input source.
6
SOURCE
Press "SOURCE" to choose from RGB, Component-p, Componenti, S-Video, Composite, DVI-D, Video and HDTV sources.
7
POWER
Refer to the "Turning the Projector On/Off" section.
8
ASPECT RATIO
To choose your desired aspect ratio (Auto/4:3/16:9).
9
ZOOM
Zooms the projector display in or out.
10
Laser button
Aim the remote at the viewing screen, press and hold this
button to activate the laser pointer.
This function is not supported in Japanese market.
11
EMPOWERING
KEY
Unique Acer functions: eOpening, eView, eTimer
Management.
12
KEYSTONE
Adjusts the image to compensate for distortion caused by
tilting the projector (±40 degrees).
Four directional Use up, down, left, right buttons to select items or make
select keys
adjustments to your selection
Downloaded From projector-manual.com Acer Manuals
English
Remote Control Layout
English
6
#
Icon
13
Function
MENU
Description
•
Press "MENU" to launch the onscreen (OSD) menu, back
to the previous step for the OSD menu operation or exit
the OSD menu.
•
Confirm your selection of items.
14
PAGE
For computer mode only. Use this button to select the next or
previous page. This function is only available when connected
to a computer via a USB cable.
15
RGB
Toggle "RGB" to adjust the red/green/blue color.
16
BRIGHTNESS
Press "BRIGHTNESS" to adjust the brightness of the image.
17
CONTRAST
Use the "CONTRAST" option to control the difference
between the lightest and darkest parts of the picture.
18
COLOR
Press "COLOR" to adjust the color temperature of image.
19
VGA
Press "VGA" to change source to the VGA connector. This
connector supports analog RGB, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and RGBsync.
20
COMPONENT
Press "COMPONENT" to change source to Component video.
This connection supports YPbPr (480p/576p/720p/1080i) and
YCbCr (480i/576i).
21
S-VIDEO
To change source to S-Video.
22
VIDEO
To change source to COMPOSITE VIDEO.
23
DVI
Press "DVI" to change source to DVI. This connection supports
digital RGB, analog RGB, YPbPr (480p/576p/720p/1080i),
YCbCr (480i/576i) and HDCP signals.
24
HDMI™
Change the video source to HDMI™. (for model if with the
HDMI™ connector)
25
MUTE
To turn on/off the volume.
26
WIRELESS
This function is not available for this model.
27
KeyPad 0~9
Press "0~9" to input a password in the "Security settings".
Note:
Downloaded From projector-manual.com Acer Manuals
7
English
Getting Started
Connecting the Projector
DVD player, Set-top Box
HDTV receiver
VGA, DVI
R B G
D-Sub
DVI-D
8
5
2
Video Output
Y
3
D-Sub
R B G
4
USB
USB
HDTV adapter
D-Sub
D-Sub
DVI-D
Y
1
RS232
RS232
S-Video Output
R W
6
7
#
Description
#
Description
1
Power cord
6
S-Video cable
2
VGA cable
7
Audio cable
3
Composite video cable
8
DVI cable
4
USB cable
9
HDMI cable (P5260E/P5260EP series)
5
VGA to component/HDTV adapter
Note: To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible
with the projector.
Downloaded From projector-manual.com Acer Manuals
English
8
Turning the Projector On/Off
Turning On the Projector
1
Slide on the lens door.
2
Ensure that the power cord and signal cable are securely connected. The
Power LED will flash red.
3
Turn on the lamp by pressing "Power" button on the control panel, and
the Power LED will turn blue.
4
Turn on your source (computer, notebook, video player ,etc.). The
projector will detect your source automatically.
•
If the screen displays "Lock" & "Source" icons, it means the projector
locks on this source type and there is no such type of input signal
found.
•
If the screen displays "No Signal", please make sure the signal cables
are securely connected.
•
If you connect multiple sources at the same time, using the "Source"
button on either control panel or the remote control or direct source
key on the remote control to switch between inputs.
1
Downloaded From projector-manual.com Acer Manuals
POWER
9
1
To turn off the projector press the "Power" button twice. The message
below will display onscreen for 5 seconds.
"Please press power button again to complete the shutdown process."
2
Immediately after powering off, the Power indicator LED will flash RED
rapidly and the fan(s) will continue to operate for about 120 seconds. This
is to ensure that the system cools correctly.
3
Once the system has finished cooling, the "Power" indicator LED will turn
solid RED which means the projector enter standby mode.
4
It is now safe to unplug the power cord.
Warning: Do not turn on the projector immediately after
powering off.
Note: If you wish to turn the projector back on, you must wait for
60 seconds at least to press the "Power" button to restart the
projector.
Warning indicators:
•
If the projector automatically shuts down and the LAMP indicator
turns solid RED, please contact your local reseller or service center.
•
If the projector automatically shuts down and the TEMP indicator
turns solid RED, this indicates that the projector has overheated. The
message below will display onscreen if this is about to happen:
"Projector Overheated. Lamp will automatically turn off soon."
•
If the TEMP indicator flashes RED and the message below is displayed
onscreen, please contact your local dealer or service center:
"Fan fail. Lamp will automatically turn off soon."
Downloaded From projector-manual.com Acer Manuals
English
Turning Off the Projector
English
10
Adjusting the Projected Image
Adjusting the Height of Projected Image
The projector is equipped with elevator feet for adjusting the height of image.
To raise the image:
1
Press the elevator foot release. (Illustration #1)
2
Raise the image to the desired height angle (Illustration #2) , then release
the button to lock the elevator foot into position.
3
Use Tilt adjusting wheel (Illustration #3) to fine-tune the display angle.
To lower the image:
1
Press the elevator foot release. (Illustration #1)
2
Lower the image to the desired height angle (Illustration #2) , then release
the button to lock the elevator foot into position.
3
Use Tilt adjusting wheel (Illustration #3) to fine-tune the display angle.
1
Elevator foot
release button
3
2
Tilt adjusting wheel
Elevator foot
Downloaded From projector-manual.com Acer Manuals
11
Consult the table below to find the optimal image sizes achievable when the
projector is positioned at a desired distance from the screen. Example: If the
projector is 3 m from the screen, good image quality is possible for image sizes
between 68" and 75".
Note: Remind as below figure, the space of 131 cm height is
required when located at 3m distance.
Figure: Fixed distance with different zoom and screen size.
Downloaded From projector-manual.com Acer Manuals
English
How to Optimize Image Size and Distance
English
12
Minimum Screen Size (Min zoom)
Maximum Screen Size (Max zoom)
Desired
Distance
From base to
From base to
Diagonal
Diagonal
(m)
top of image
top of image
(inch) W (cm) x H (cm)
(inch) W (cm) x H (cm)
<A>
(cm)
(cm)
<B>
<B>
<C>
<C>
1.5
34
69 x 52
60
37
76 x 57
66
2
46
93 x 69
80
50
102 x 76
88
2.5
57
116 x 87
100
62
127 x 95
109
3
68
139 x 104
120
75
152 x 114
131
3.5
80
162 x 122
140
87
178 x 133
153
4
91
185 x 139
160
100
203 x 152
175
4.5
103
208 x 156
180
112
228 x 171
197
5
114
231 x 174
200
125
254 x 190
219
6
137
278 x 208
240
150
305 x 228
263
7
159
324 x 243
280
175
355 x 266
306
8
182
370 x 278
319
200
406 x 305
350
9
205
417 x 313
359
225
457 x 343
394
10
228
463 x 347
399
250
508 x 381
438
11
251
509 x 382
439
275
558 x 419
482
12
273
556 x 417
479
300
609 x 457
525
Zoom Ratio: 1.1x
Downloaded From projector-manual.com Acer Manuals
13
The table below shows how to achieve a desired image size by adjusting either
the position or the zoom ring. Example: To obtain an image size of 50", set the
projector at a distance between 2 m and 2.2 m from the screen and adjust the
zoom level accordingly.
Downloaded From projector-manual.com Acer Manuals
English
How to Get a Preferred Image Size by Adjusting
Distance and Zoom
English
14
Desired Image Size
Distance (m)
Top (cm)
Diagonal (inch)
<A>
W (cm) x H (cm)
Max zoom
<B>
Min zoom
<C>
From base to top of
image < D >
30
61 x 46
1.2
1.3
53
40
81 x 61
1.6
1.8
70
50
102 x 76
2.0
2.2
88
60
122 x 91
2.4
2.6
105
70
142 x 107
2.8
3.1
123
80
163 x 122
3.2
3.5
140
90
183 x 137
3.6
4.0
158
100
203 x 152
4.0
4.4
175
120
244 x 183
4.8
5.3
210
150
305 x 229
6.0
6.6
263
180
366 x 274
7.2
7.9
315
200
406 x 305
8.0
8.8
351
250
508 x 381
10.0
11.0
438
300
610 x 457
12.0
Zoom Ratio: 1.1x
Downloaded From projector-manual.com Acer Manuals
526
15
Acer Empowering Technology
EMPOWERING
KEY
Acer EMPOWERING KEY provides three
Acer unique functions, they are "Acer
eView Management", "Acer eTimer
Management" and "Acer eOpening
Management" respectively. Press " "
key for more than one second to launch
the onscreen display main menu to
modify its function.
Acer eView Management
Press "
" to launch "Acer eView
Management" submenu.
"Acer eView Management" is for
display mode selection. Please refer to
"Onscreen Display (OSD) Menus"
section for more detail.
Acer eTimer Management
Press "
" to launch "Acer eTimer
Management" submenu.
"Acer eTimer Management" provides
the reminding function for
presentation time control. Please refer
to "Onscreen Display (OSD) Menus"
section for more detail.
Acer eOpening Management Press " " to launch "Acer eOpening
Management" submenu.
"Acer eOpening Management" allows
user to change the Startup screen to
their personalized image. Please refer
to "Onscreen Display (OSD) Menus"
section for more detail.
Downloaded From projector-manual.com Acer Manuals
English
User Controls
English
16
Onscreen Display (OSD) Menus
The Projector has multilingual OSD that allow you to make image adjustments
and change a variety of settings.
Using the OSD menus
•
To open the OSD menu, press "MENU" on the remote control or control
panel.
•
When the OSD is displayed, use the
keys to select any item in the
main menu. After selecting the desired main menu item, press
enter submenu for feature setting.
•
Use the
to
keys to select the desired item and adjust the settings by
using the
keys.
•
Select the next item to be adjusted in the submenu and adjust as described
above.
•
Press "MENU" on the remote control or control panel, the screen will
return to the main menu.
•
To exit OSD, press "MENU" on the remote control or control panel again.
The OSD menu will close and the projector will automatically save the new
settings.
Main menu
Setting
Submenu
Downloaded From projector-manual.com Acer Manuals
17
Display Mode
Brightness
Contrast
English
Color Setting
There are many factory presets optimized for various types of
images.
•
•
•
•
Bright: For brightness optimization.
•
•
User 1: Memorize user’s settings.
Standard: For true-color optimization.
Video: For playing video in a bright environment.
Blackboard: Blackboard mode can improve displayed color
when you project onto darker surfaces.
User 2: Memorize user’s settings
Adjusts the brightness of the image.
•
Press
to darken image.
•
Press
to lighten the image.
"Contrast" controls the difference between the lightest and
darkest parts of the picture. Adjusting the contrast changes the
amount of black and white in the image.
•
Press
to decrease the contrast.
•
Press
to increase the contrast.
Color
Temperature
Adjusts the color temperature. At higher color temperatures, the
screen looks colder; at lower color temperatures, the screen looks
warmer.
Degamma
Effects the representation of dark scenery. With greater gamma
value, dark scenery will look brighter.
Color R
Adjusts the red color.
Color G
Adjusts the green color.
Color B
Adjusts the blue color.
Saturation
Adjusts a video image from black and white to fully saturated
color.
•
Press
to decrease the amount of color in the image.
•
Press
to increase the amount of color in the image.
Downloaded From projector-manual.com Acer Manuals
English
18
Tint
Adjusts the color balance of red and green.
•
Press
to increase the amount of green in the image.
•
Press
to increase the amount of red in the image.
Note: "Saturation" and "Tint" functions are not supported under computer
mode or DVI mode.
Image Setting
Keystone
Adjusts image distortion caused by tilting projection. (±40 degrees)
Aspect
Ratio
Use this function to choose your desired aspect ratio.
•
Auto: Keep the image with original width-higth ratio and maxmize the image to fit native horizontal or vertical pixels.
•
4:3: The image will be scaled to fit the screen and displayed using
a 4:3 ratio.
•
16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display image using a 16:9 ratio.
Projection
Front-Desktop
•
The factory default setting.
Front-Ceiling
•
Downloaded From projector-manual.com Acer Manuals
When you select this function, the projector inverts the image for
ceiling-mounted projection.
19
•
When you select this function, the projector reverses the image
so you can project behind a translucent screen.
Rear-Ceiling
•
When you select this function, the projector reverses and inverts
the image at same time. You can project from behind a
translucent screen with ceiling mounted projection.
H. Position
(Horizontal
Position)
•
Press
to move the image left.
•
Press
to to move the image right.
V. Position
(Vertical Position)
•
Press
to move the image down.
•
Press
to move the image up.
Frequency
"Frequency"changes the projector’s refresh rate to match the
frequency of your computer’s graphic card. If you can see a vertical
flickering bar in the projected image, use this function to make an
adjustment.
Tracking
Synchronizes the signal timing of the display with the graphic card. If
you experience an unstable or flickering image, use this function to
correct it.
Sharpness
Adjusts the sharpness of the image.
•
Press
to decrease the sharpness.
•
Press
to increase the sharpness.
Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions
are not supported under DVI and Video mode.
Note: "Sharpness" functions is not supported under DVI and Computer
mode.
Downloaded From projector-manual.com Acer Manuals
English
Rear-Desktop
English
20
Management Setting
ECO Mode
Choose “On” to dim the projector lamp which will lower power
consumption, extend the lamp life and reduce noise. Choose ”Off”
to return normal mode.
Auto Shutdown
(Minutes)
The projector will auto shutdown while there is no signal input
after the allocated time. (in minutes)
Source Lock
When source lock is turned "Off", the projector will search for
other signals if the current input signal is lost. When source lock is
turned "On", it will “Lock” the current source channel unless you
press “SOURCE” button on the remote control for next channel.
Menu Location
Choose the Menu location on the display screen
Startup Screen
Use this function to select your desired startup screen. If you
change the setting, the changes will take effect when you exit the
OSD menu.
•
•
Screen Capture
Acer: The default startup screen of Acer projector.
User: Use memorize picture from "Screen Capture" function.
Use this function to customize the startup screen. To capture the
image that you want to use as the startup screen, follow the
instructions below.
Notice:
Before proceeding with the following steps, make sure that the
"Keystone" is set to the default value 0 and the aspect ration is set
to 4:3. For details, refer to the "Image Setting" section.
•
Change the "Startup Screen" from the default setting "Acer"
to "User".
•
•
Press "Screen Capture" to customize the startup screen.
•
A message appears, stating that the screen capture is in
progress.
•
When the screen capture is finished, the message disappears
and the original display is shown.
•
The customized startup screen, as shown below, take effect
when there is a new input signal or when you restart the
projector.
Downloaded From projector-manual.com Acer Manuals
A dialog box appears to confirm the action. Choose "Yes" to
use the current image as your customized startup screen. The
capture range is the red rectangular area. Choose "No" to
cancel the screen capture and exit the onscreen display (OSD).
21
Lamp Hour Elapse
Displays the lamp’s elapsed operating time (in hours).
Lamp Reminding
Activate this function to display a reminder to change the lamp 30
hours before its expected end-of-life.
Lamp Hour Reset
Security
Press
after choosing "Yes" to turn the lamp hour counter to 0 .
Security
This projector provides an excellent security function for the
administrator to manage usage of the projector.
Press
to change the "Security" setting. If the security function
is enabled, you must enter "Administrator Password" first before
changing the security settings.
•
Select "On" to enable the security function. The user has to
enter a password to operate the projector. Please refer to
"User Password" section for details.
•
If "Off"is selected, then the user can turn on the projector
without password.
Timeout(Min.)
Once "Security" is activated to "On", the administrator can set
timeout function.
Downloaded From projector-manual.com Acer Manuals
•
•
•
Press
•
•
The factory default setting of "Timeout(Min.)" is "Off".
or
to select timeout interval.
The range is from 10 minutes to 990 minutes.
When the time is up, the projector will prompt the user to
enter the password again.
Once the security function is enabled, the projector will
request user to enter password when switch on the projector .
Both "User Password" and "Administrator Password" can be
accepted for this dialogue.
English
Note: This screen capture function is limited by 4:3 aspect ratio only.
Note: For XGA models, to get best quality for you desired image, suggest
end-user set PC resolution to 1024 x 768 before you use this function.
Note: For SVGA models, to get best quality for you desired image, suggest
end-user set PC resolution to 800 x 600 before you use this function.
22
English
User Password
•
•
Press
•
•
Press
•
•
The password should be between 4 and 8 characters long.
•
If you select "Always request password while projector turns
on", the user has to enter the password every time when the
projector is turned on.
to setup or change the "User Password".
Press number keys to set your password on the remote control
and press "MENU" to confirm.
to delete character.
Enter the password when you see "Confirm Password"
displayed.
If you select "Request password only after plugging power
cord", the projector will prompt the user to enter the
password every time the power cord is plugged.
Administrator Password
The "Administrator Password" can be used by both "Enter
Administrator Password" and "Enter Password" dialog boxes.
•
Press
•
The factory default of "Administrator Password" is "1234".
to change the "Administrator Password".
If you forgot your administrator password, do the following to
retrieve the administrator Password:
•
An unique 6-digit "Universal Password" which is printed on
the Security Card (please check accessory in the box). This
unique password is the number wihch will be accepted by
projector anytime no matter what the Administaror Password
is.
•
If losing this securiy card and number, please contact with an
Acer service center.
Lock User Startup Screen
Reset
•
Default Lock User Startup Screen is "Off". If lock user startup
screen is "On", users cannot change the startup screen
anymore and avoid the other users change that arbitrarily.
Choose "Off" to unlock startup screen.
•
Press
after choosing "Yes" to return the parameters on
all menus to the factory default settings.
Downloaded From projector-manual.com Acer Manuals
23
Volume
English
Audio Setting
•
Press
to decrease the volume.
Press
to increase the volume.
Power On/Off Volume
•
•
•
•
Alarm Volume
•
Select this function to adjust volume of any warning
notifications.
Mute
Downloaded From projector-manual.com Acer Manuals
Choose "On" to mute the volume.
Choose "Off" to restore the volume.
Select this function to adjust the notification volume when
turning the projector on/off.
English
24
Timer Setting
Timer Start
Timer Period
Timer Volume
Timer Display
Timer Location
•
Press
to start or stop the timer.
•
•
Press
or
•
Press
screen.
•
Choose the location of the timer on the screen.
to adjust the timer period.
Select this function to adjust notification volume when the
timer function is enabled and time is up.
or
to which timer mode to display on the
Language Setting
Language
Choose the multilingual OSD menu . Use
your preferred menu language.
•
Downloaded From projector-manual.com Acer Manuals
Press
to confirm the selection.
to select
25
English
Appendices
Troubleshooting
If you experience a problem with your Acer projector, refer to the following
troubleshooting guide. If the problem persists, please contact your local reseller
or service center.
Image Problems and Solutions
#
1
2
Problem
No image appears
onscreen
Partial, scrolling
or incorrectly
displayed
image(For PC
(Windows 95/98/
2000/XP))
Downloaded From projector-manual.com Acer Manuals
Solution
•
•
Connected as described in the "Installation" section.
•
Check if the projection lamp has been securely
installed. Please refer to the "Replacing the Lamp"
section.
•
Make sure you have slid on the lens door and the
projector is turned on.
•
Press "RESYNC" on the remote control or control
panel.
•
Ensure none of the connector pins are bent or
broken.
For an incorrectly displayed image:
•
Open "My Computer", open the "Control
Panel", and then double-click the "Display"
icon.
•
Select the "Settings" tab.
•
Verify that your display resolution setting is
lower than or equal to UXGA (1680 x 1050)
(P5260E/P5260EP series) or WXGA+ (1400 x
900) (P1165E/P1165EP series).
•
Click the "Advanced Properties" button.
If the problem still appears, change the monitor display
you are using and follow the steps below:
•
Verify that the resolution setting is lower than
or equal to UXGA (1680 x 1050) (P5260E/
P5260EP series) or WXGA+ (1400 x 900)
(P1165E/P1165EP series).
•
Click the "Change" button under the
"Monitor" tab.
•
Click "Show all devices". Next, select "Standard
monitor types" under the SP box, and choose
the resolution mode you need under the
"Models" box.
•
Verify that the resolution setting of the
monitor display is lower than or equal to UXGA
(1680 x 1050) (P5260E/P5260EP series) or
WXGA+ (1400 x 900) (P1165E/P1165EP series).
English
26
3
4
5
6
7
Partial, scrolling
or incorrectly
displayed image
(For notebooks)
The screen of the
notebook
computer is not
displaying your
presentation
Image is unstable
or flickering
Image has vertical
flickering bar
Image is out of
focus
Downloaded From projector-manual.com Acer Manuals
•
Press "RESYNC" on the remote control or control
panel.
•
For an incorrectly displayed image:
•
Follow the steps for item 2 (above) to adjust
the resolution of your computer.
•
Press the respective button to toggle output
settings. Example: [Fn]+[F4], Compaq
[Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4],
IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3],
Toshiba [Fn]+[F5]
•
If you experience difficulty changing resolutions or
your monitor freezes, restart all equipment
including the projector.
•
If you are using a Microsoft® Windows® based
notebook: Some notebook PCs may deactivate their
own screens when a second display device is in use.
Each has a different way to be reactivated. Refer to
your computer's manual for detailed information.
•
If you are using an Apple® Mac® OS based
notebook: In System Preferences, open Display and
select Video Mirroring "On".
•
Use "Tracking" to correct it. Refer to the "Image
Setting" section for more information.
•
Change the display color depth settings on your
computer.
•
Use "Frequency" to make an adjustment. Refer to
the "Image Setting" section for more information.
•
Check and reconfigure the display mode of your
graphics card to make it compatible with the
projector.
•
•
•
Make sure the lens door is slid on.
Adjusts the focus ring on the projector lens.
Make sure the projection screen is within the
required distance of 3.3 to 39.4 feet (1.0 to 12.0
meters) from the projector. Refer to the "How to
Get a Preferred Image Size by Adjusting Distance
and Zoom" section for more information.
27
9
10
11
Image is stretched
when displaying a
"widescreen"
DVD title
Image is too small
or too large
Image has slanted
sides
Image is reversed
When you play a DVD encoded in anamorphic or 16:9
aspect ratio you may need to adjust the following
settings:
•
If you play an Letterbox(LBX) format DVD title,
please change the format to Letterbox(LBX) in the
projector OSD.
•
If you play a 4:3 format DVD title, please change the
format to 4:3 in the projector OSD.
•
If the image is still stretched, you will also need to
adjust the aspect ratio. Set up the display format to
16:9 (wide) aspect ratio on your DVD player.
•
•
Adjust the zoom lever on the top of the projector.
•
Press "MENU" on the remote control or no the
control panel. Go to "Image setting --> Aspect
Ratio" and try different settings.
•
If possible, reposition the projector so that it is
centered on the screen.
•
Press the "Keystone / " button on the control
panel or the remote control until the sides are
vertical.
•
Select "Image --> Projection" on the OSD and adjust
the projection direction.
Move the projector closer to or further from the
screen.
Problems with the Projector
#
Condition
Solution
1
The projector stops responding
to all controls
If possible, turn off the projector, then
unplug the power cord and wait at least 30
seconds before reconnecting power.
2
Lamp burns out or makes a
popping sound
When the lamp reaches the end of its useful
life, it will burn out and may make a loud
popping sound. If this happens, the projector
will not turn on until the lamp module has
been replaced. To replace the lamp, follow
the procedures in the "Replacing the Lamp"
section.
Downloaded From projector-manual.com Acer Manuals
English
8
English
28
OSD Messages
#
1
Condition
Message
Message Reminder
Fan Fail - the system fan is not working.
Projector Overheated - the projector has exceeded its
recommended operating temperature and must be allowed to
cool down before it may be used.
Replace the lamp - the lamp is about to reach its maximum
lifetime. Prepare to replace it soon.
Downloaded From projector-manual.com Acer Manuals
29
English
LED & Alarm Definition Listing
LED Messages
Message
Lamp LED
Temp LED
Red
Red
Red
Blue
Standby
(power cord plugged in)
--
--
V
--
Lamp retry
--
--
--
Quick
flashing
Turning off
(cooling state)
--
--
Quick
flashing
--
Turning off
(cooling completed)
--
--
V
--
Error (thermal failure)
--
--
--
V
Error (fan lock failure)
--
Quick
flashing
--
V
Error (lamp breakdown)
V
--
--
V
Error (color Wheel fail)
Quick
flashing
--
--
V
Downloaded From projector-manual.com Acer Manuals
Power LED
English
30
Replacing the Lamp
Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp.
The projector will detect the lamp life. It will be shown you a warning message
"Lamp is approaching the end of its useful life in full power operation.
Replacement Suggested!" When you see this message, change the lamp as soon
as possible. Make sure the projector has been cooling down for at least 30
minutes before changing the lamp.
Warning: Lamp compartment is hot! Allow it to cool down before
changing lamp!
a
b
1
2
a
4
3
To change the Lamp
1
Turn off the projector by pressing the "Power" button.
2
Allow the projector at least 30 minutes to cool down.
3
Disconnect the power cord.
4
Place your hands on the top cover.
5
Find the "OPEN" buttons on both sides of the projector and push it at the
same time. (Illustration #1)
6
Gently push the top cover out slightly and slide it away to open the top
cover. (Illustration #2)
7
Remove the two screws that secure the lamp module and pull up the lamp
bar. (Illustration #3)
8
Pull out the lamp module by force. (Illustration #4)
To replace the lamp module, reverse the previous step.
Warning: To reduce the risk of personal injury, do not drop the
lamp module or touch the lamp bulb. The bulb may shatter and
cause injury if it is dropped.
Downloaded From projector-manual.com Acer Manuals
31
If you wish to install the projector using a ceiling mount, please refer to the
steps below:
1
Drill four holes into a solid, structurally sound part of the ceiling, and
secure the mount base.
Note: Screws are not included. Please obtain the appropriate
screws for your type of ceiling.
2
Secure the ceiling rod using the appropriate type of four-cylinder screws.
Ceiling Mount Base
- Attach to ceiling
Ceiling Mount Base
Long Rod
Extension Rod
Screw Type A
50 mm length / 8 mm diameter -
Long Cylinder Cap
Allen Key
- For tightening/loosen
Tightening Screw
Medium Rod
Downloaded From projector-manual.com Acer Manuals
English
Ceiling Mount Installation
English
32
3
Use the appropriate number of screws for the projector size to attach the
projector to the ceiling mount bracket.
Smaller Washer
Screw Type B
Large Washer
Projector Bracket
Supports projector and allows for adjustments
Spacer
- For heat dissipation
Note: It is recommended that you keep a reasonable space
between the bracket and the projector to allow for proper heat
distribution. Use two washers for extra support, if deemed
necessary.
4
Attach the ceiling bracket to the ceiling rod.
Large cylinder cap
Allen Key
Screw Type A
50 mm length 8 mm diameter
Downloaded From projector-manual.com Acer Manuals
- For tightening/loosening
Tightening Screw
33
Adjust the angle and positioning as necessary.
English
5
Tightening Screw
Allen Key
Allen Key
Tightening Screw
Note: The appropriate type of screw and washer for each model is
listed in the table below. 3 mm diameter screws are enclosed in
the screw pack.
Models
Screw Type B
Washer Type
Diameter (mm)
Length (mm)
Large
Small
P5260E/P5260EP
3
20
V
V
P1165E/P1165EP
3
20
V
V
Downloaded From projector-manual.com Acer Manuals
English
34
Specifications
The specifications below are subject to change without notice. For final specs,
please refer to Acer's marketing documentation.
Projection system
DLP™
Resolution
P5260E/P5260EP: Native: XGA (1024 x 768)
Maximum: UXGA (1680 x 1050)
P1165E/P1165EP: Native: SVGA (800 x 600)
Maximum: WXGA+ (1440 x 900)
Brightness
P5260E/P5260EP: 2700/2800 ANSI Lumens
P1165E/P1165EP: 2400/2500 ANSI Lumens
Computer compatibility
IBM PC and compatibles, Apple Macintosh, iMac and
VESA standards: SXGA, SVGA, VGA (resizing)
Video compatibility
NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/
K/K1/L), HDTV (720p, 1080i), EDTV (480p, 576p), SDTV
(480i, 576i)
Aspect ratio
4:3 (native), 16:9
Contrast ratio
2100:1
Displayable colors
16.7 million colors
Noise level
P5260E/P5260EP: 32 dBA (standard), 30 dBA (ECO)
P1165E/P1165EP: 30 dBA (standard), 28 dBA (ECO)
Projection lens
F / 2.51 - 2.69, f = 21.95 mm - 24.18 mm with 1.1x
manual zoom lens
Projection screen size (diagonal)
23" (0.58 m) - 300" (7.62 m)
Projection distance
3.3' m (1.0 m) - 39.4' m (12.0 m)
Throw ratio
50" @ 2 m (1.97 - 2.16:1)
Horizontal scan rate
31.5 - 100 kHz
Vertical refresh scan rate
56 - 85 Hz
Lamp type
P5260E/P5260EP: 230 W user-replaceable lamp
P1165E/P1165EP: 200 W user-replaceable lamp
Lamp life
P5260E/P5260EP: 3000 hours (standard), 5000 hours
(economy)
P1165E/P1165EP: 3000 hours (standard), 4000 hours
(economy)
Keystone correction
+/- 40 degrees
Audio
Internal speaker with 2 W output
Weight
2.8 kg (6.17 lbs.)
Dimensions (W x D x H)
300 x 228 x 100 mm (11.81 x 8.98 x 3.94 inches)
Remote control
Laser pointer function
Digital zoom
2x
Power supply
AC input 100 - 240 V, 50/60 Hz
Power consumption
P5260E/P5260EP: 280 W
P1165E/P1165EP: 250 W
Operating temperature
5ºC to 35ºC / 41ºF to 95ºF
Uniformity
85%
Downloaded From projector-manual.com Acer Manuals
35
•
•
•
•
•
•
•
•
•
Power socket x 1
VGA input x 1
Composite video x 1
S-video x 1
VGA output x 1
DVI-D x 1: with HDCP support
3.5 mm audio jack input x 1
RS232 x 1
USB x 1: for remote computer control
Below items are for P5260E/P5260EP series only:
Standard package contents
•
•
•
HDMI x 1
•
•
•
•
•
•
•
•
•
•
AC power cord x 1
VGA input x 2
3.5 mm audio jack input x 2
VGA cable x 1
Composite video cable x 1
DVI-D cable x 1 (P5260E/P5260EP series)
Remote control x 1
Batteries x 2 (for remote control)
User's guide (CD-ROM) x 1
Quick start guide x 1
Security card x 1
Carrying case x 1
* Design and specifications are subject to change without notice.
Downloaded From projector-manual.com Acer Manuals
English
I/O connectors
English
36
Compatibility Modes
A. VGA Analog
1
VGA Analog - PC Signal
Modes
Resolution
V.Frequency [Hz]
H.Frequency [KHz]
VGA
640x480
60
31.50
640x480
72
37.90
640x480
75
37.50
640x480
85
43.30
720x400
70
31.50
720x400
85
37.90
800x600
56
35.20
800x600
60
37.90
800x600
72
48.10
800x600
75
46.90
800x600
85
53.70
832x624
75
49.725
1024x768
60
48.40
1024x768
70
56.50
1024x768
75
60.00
1024x768
85
68.70
1152x864
70
63.80
1152x864
75
67.50
1280x1024
60
63.98
SVGA
XGA
SXGA
Note: "*" Only for P5260E/ P5260EP series
Downloaded From projector-manual.com Acer Manuals
37
75
79.98
*1280x1024
85
91.10
1280x960
60
59.70
*1280x960
75
75.23
SXGA+
*1400x1050
60
63.98
UXGA
*1600x1200
60
75.00
Power Mac G4
640x480
66.6(67)
34.93
800x600
60
37.90
1024x768
60
48.40
1152x870
75
68.68
1280x960
75
75.00
1280x1024
60
63.98
640x480
60
31.35
640x480
66.6(67)
34.93
800x600
60
37.90
1024x768
60
48.40
1152x870
75
68.68
1280x960
75
75.00
1280x1024
60
63.98
1024x768
75
60.00
QuadVGA
PowerBook G4
i Mac DV (G3)
2
VGA Analog - Extended Wide timing
Modes
Resolution
V.Frequency [Hz]
H.Frequency [KHz]
WXGA
1280x768
60
48.36
1280x768
75
57.60
*1280x768
85
68.630
Note: "*" Only for P5260E/ P5260EP series
Downloaded From projector-manual.com Acer Manuals
English
*1280x1024
38
60
45.00
1280x800
60
49.702
1360x768
60
47.72
*1440x900
60
55.935
Modes
Resolution
V.Frequency [Hz]
H.Frequency [KHz]
VGA
640x480
60
31.50
640x480
72
37.90
640x480
75
37.50
640x480
85
43.30
800x600
56
35.20
800x600
60
37.90
800x600
72
48.10
800x600
75
46.90
800x600
85
53.70
832x624
75
49.725
1024x768
60
48.40
1024x768
70
56.50
1024x768
75
60.00
1024x768
85
68.70
1152x864
70
63.80
1152x864
75
67.50
English
1280x720
B. DVI Digital
1
DVI - PC Signal
SVGA
XGA
SVGA
Note: "*" Only for P5260E/ P5260EP series
Downloaded From projector-manual.com Acer Manuals
39
85
77.10
1280x1024
60
63.98
*1280x1024
72
76.97
*1280x1024
75
79.98
*1280x1024
85
91.10
1280x960
60
59.70
*1280x960
75
75.23
SVGA+
*1400x1050
60
63.98
UXGA
*1600x1200
60
75.00
Power Mac G4
640x480
66.6(67)
34.93
800x600
60
37.90
1024x768
60
48.40
1152x870
75
68.68
1280x960
75
75.00
1280x1024
60
63.98
640x480
60
31.35
640x480
66.6(67)
34.93
800x600
60
37.90
1024x768
60
48.40
1152x870
75
68.68
1280x960
75
75.00
1280x1024
60
63.98
1024x768
75
60.00
QuadVGA
PowerBook G4
i Mac DV (G3)
2
DVI - Extended Wide timing
Modes
Resolution
V.Frequency [Hz]
H.Frequency [KHz]
WXGA
1280x768
60
48.36
Note: "*" Only for P5260E/ P5260EP series
Downloaded From projector-manual.com Acer Manuals
English
1152x864
English
40
3
1280x768
75
57.60
*1280x768
85
68.630
1280x720
60
45.00
1280x800
60
49.702
1360x768
60
47.72
1440x900
60
55.935
DVI - Video Signal
Modes
Resolution
V.Frequency [Hz]
H.Frequency [KHz]
480i (NTSC)
720x480(1440x480)
59.94(29.97)
27.00
480p (NTSC)
720x480
59.94
31.47
576i (PAL)
720x576(1440x576)
50(25)
27.00
576p (PAL)
720x576
50
31.25
720p (NTSC)
1280x720
60
45.00
720p (PAL)
1280x720
50
37.50
1080i (NTSC)
1920x1080
60(30)
28.13
1080i (PAL)
1920x1080
50(25)
33.75
1080p (NTSC)
*1920x1080
60
67.50
1080p (PAL)
*1920x1080
50
56.25
Note: "*" Only for P5260E/ P5260EP series
Downloaded From projector-manual.com Acer Manuals
FCC Notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the device and receiver.
•
Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio and TV
reception.
Caution
Changes or modifications not expressly approved by the manufacturer could
void the user's authority, which is granted by the Federal Communications
Commission, to operate this device.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Downloaded From projector-manual.com Acer Manuals
English
Regulations and Safety Notices
English
41
English
42
Remarque à l'intention des utilisateurs canadiens
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du
Canada.
Canada — Low-power license-exempt radio
communication devices (RSS-210)
a
Common information
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
b
Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is
intended to be operated indoors and installation outdoors is subject
to licensing.
Declaration of Conformity for EU countries
Acer hereby declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. (Please visit
http://global.acer.com/support/certificate.htm for complete documents.)
Compliant with Russian regulatory certification
Radio device regulatory notice
Note: Below regulatory information is for models with wireless
LAN and/or Bluetooth only.
General
This product complies with the radio frequency and safety standards of any
country or region in which it has been approved for wireless use. Depending on
configurations, this product may or may not contain wireless radio devices (such
as wireless LAN and/or Bluetooth modules). Below information is for products
with such devices.
Downloaded From projector-manual.com Acer Manuals
R&TTE Directive 1999/5/EC as attested by conformity with the following
harmonized standard:
•
•
•
Article 3.1(a) Health and Safety
•
EN60950-1:2001
•
EN50371:2002
Article 3.1(b) EMC
•
EN301 489-1 V1.4.1:2002
•
EN301 489-17 V1.2.1:2002
Article 3.2 Spectrum Usages
•
EN300 328 V1.5.1:2004
List of applicable countries
EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece,
Spain, France, Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal,
Finland, Sweden, United Kingdom Estonia, Latvia, Lithuania, Poland, Hungary,
Czech Republic, Slovak Republic, Slovenia, Cyprus and Malta. Usage allowed in
the countries of European Union, as well as Norway, Switzerland, Iceland and
Liechtenstein. This device must be used in strict accordance with the regulations
and constraints in the country of use. For further information, please contact a
local office in the country of use.
Downloaded From projector-manual.com Acer Manuals
English
European Union (EU)
English
43
English
44
Acer America Corporation
333 West San Carlos St., San Jose
CA 95110, U. S. A.
Tel : 254-298-4000
Fax : 254-298-4147
www.acer.com
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
The following local Manufacturer / Importer is responsible for this declaration:
Product:
DLP Projector
Model Number:
PNX0709/PSV0710
Machine Type:
P5260E, P5260EP/ P1165E, P1165EP
Name of Responsible Party:
Acer America Corporation
Address of Responsible Party:
333 West San Carlos St.
San Jose, CA 95110
U. S. A.
Contact Person:
Acer Representative
Phone No.:
254-298-4000
Fax No.:
254-298-4147
Downloaded From projector-manual.com Acer Manuals
English
English
45
Declaration of Conformity
We,
Acer Computer (Shanghai) Limited
3F, No. 168 Xizang medium road, Huangpu District,
Shanghai, China
Contact Person: Mr. Easy Lai
Tel: 886-2-8691-3089
Fax: 886-2-8691-3120
E-mail: easy_lai@acer.com.tw
Hereby declare that:
Product:
Trade Name:
Model Number:
SKU Number:
DLP Projector
Acer
PNX0709/ PSV0710
P5260E, P5260EP/ P1165E, P1165EP
Is compliant with the essential requirements and other relevant provisions of the following EC directives,
and that all the necessary steps have been taken and are in force to assure that production units of the
same product will continue comply with the requirements.
EMC Directive 89/336/EEC, amended by 92/31/EEC and 93/68/EEC as attested by
conformity with the following harmonized standards:
-. EN55022:1998 + A1:2000 + A2:2003, AS/NZS CISPR22:2002, Class B
-. EN55024:1998 + A1:2001 + A2:2003
-. EN61000-3-2:2000, Class D
-. EN61000-3-3:1995 + A1:2001
Low Voltage Directive 2006/95/EC as attested by conformity with the following
harmonized standard:
-. EN60950-1:2001
RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous
Substances in Electrical and Electronic Equipment
Downloaded From projector-manual.com Acer Manuals
Download PDF

advertising