3Com 45-337 Two-Way Radio User Manual

10/22/08
8:18 AM
Page 1
G
DataComm
Section G - DataComm
Section G - DataComm
10/22/08
8:18 AM
Page 2
LANTEK® 6/6A/7G LAN Cable Certification Testers
LANTEK offers a family of high performance cable certification testers to support a full range of LAN cable testing. The LANTEK family
of certification testers uses the IDEAL patented measurement system that removes the effects of ordinary patchcords, thus making
channel and permanent link certification of a cable standard such as CAT6A or ISO-F possible without changing adapters. The same
patented technology also makes DUALmode Testing possible so the users can get any two test results simultaneously. As a result, the
LANTEK Cable Certification Testers save you money and time on the job.
n LANTEK 7G 1GHz is the world’s first independently verified Level IV accurate LAN cable certification tester capable of testing installations
up to 1 GHz, exceeding the requirements for CAT6A/7/ISO-F.
n LANTEK 6A 500MHz is a Level IIIe verified certification tester designed to support the NEW CAT6A Standard to certify LAN cabling to
support applications up to 10G Ethernet.
n LANTEK 6 350MHz is a Level III verified LAN certification tester designed to support up to CAT6/ISO-E cabling.
Features of LANTEK® Products
n
n
n
n
n
n
Testers
n
High-Performance LANTEK 7G/6A/6 – sweeps
to 1 GHz and supports testing requirements up to
CAT 6/6A/7/ISO-F and beyond
Level IV/IIIe/III Accuracy – independently verified
by ETL for baseline, channel and permanent link
DUALmode Testing to Save Time – reports
channel and permanent link test results simultaneously
Test with Patchcords to Save Money – performs
CAT6A/6/5e/ISO-Ea/E/D testing with standard
patchcords to achieve the lowest cost of ownership
Largest Internal/External Memory Capacity –
makes record management easy
Convenient FIBERTEK™ Accessory –
simultaneously tests two fibers for attenuation and
length
Innovative TRACETEK™ Accessory – performs
advanced fiber fault location and troubleshooting
functions
The only
certifier
to sweep
to 1GHz
G-2
www.idealindustries.com
1-800-435-0705 for Customer Service
Section G - DataComm
10/22/08
8:18 AM
Page 3
DataComm Equipment
Kits Include:
LANTEK6B LANTEK6ABAS LANTEK6APREM LANTEK6ATRV LANTEK7GBAS LANTEK7GPREM LANTEK7GTRV
PACKAGE AND ACCESSORIES
Basic
Basic
4
Soft Carrying Case
Deluxe Hard Shell Case
Airline Grade Travel Case with Wheels
64MB Compact-Flash Memory Card
Category 6 Universal Adapters & Reference Cables
Category 6A Universal Adapters & Reference Cables
Batteries
DUAL Bay Rapid Battery Charger
Headsets (2), AC Adapters (2),
Hanging Straps (2), Serial Cable (1),
USB Cable (1), LANTEK Reporter Software (1)
4
–
–
–
–
–
–
–
4
–
2
–
4
Premium
Travel
–
–
–
4
–
4
–
4
4
2
–
4
4
4
4
Basic
4
–
–
–
–
4
4
–
Premium
Travel
–
–
–
4
4
4
–
4
–
–
4
4
4
4
4
4
2
–
4
4
4
4
4
4
4
4
Note: Delivery content may vary outside of US. Please contact your local IDEAL sales office for details.
The airline grade Travel Case fits in most airline overhead storage compartments.
LANTEK6
Basic
LANTEK6A LANTEK7G
Premium
Frequency Range
350 MHz
500 MHz
Supports CAT7 & ISO-F
Upgradeable Upgradeable
Supports CAT6A
Upgradeable
4
Support CAT6/5e/3 and ISO-E/D/C
4
4
Accuracy Level III/IIIe (Draft)/IV
ETL
ETL
(LANTEK6/6A/7G) verified by
Support DUALmode Testing to
4
4
Save Time
Test with Patchcords to Save Money
4
4
Screen Display Area
Best
Best
CAT6 Test Storage with Graphs
500
500
Standard External Compact Flash
64MB
Option
Memory
4
USB/Serial Port
4
4
Copper TDR Trace
4
Fiber Loss Measurement (FIBERTEK)
Option
Option
Option
Option
Fiber Distance to Break (TRACETEK)
Talk over Fiber & Copper
4
4
(Full Duplex)
4
Display Screen on Remote
4
Troubleshooting Tone Generator
4
4
on Remote
External Rapid Battery Charger &
Option
4
Extra Batteries
1-800-435-0705 for Customer Service
Premium
1 GHz
4
4
4
ETL
4
4
Best
500
64MB
4
4
Option
Option
4
4
Other Accessories
LANTEK6/6A/7G
Soft Carry Case
3010-12-0096
Deluxe Hard Carry Case
3010-12-0092
Batteries
1219-00-1604
Serial Cable
6011-50-0031
64 MB CompactFlash Card
2112-27-0605
CompactFlash Card Reader for PC
2112-27-0604
LANTEK CAT 6/5e Channel Adapters (ea.)
0012-00-0629
LANTEK CAT 6A/6/5e Channel Adapters (ea.)
0012-00-0656
LANTEK CAT 6A/6/5e Reference Patchcords (ea.)
6011-50-0029
Talkset (2)
3010-70-0015
Dual Bay Battery Charger
0012-00-0642
LANTEK CAT 7 TERA Testing Kit
1019-00-1105
LANTEK CAT 7 NEXANS Testing Kit
1019-00-1110
Coax Testing Adapter Kit
1019-00-0343
110 Block Testing Adapter Kit
1019-00-1112
BIX Block Testing Adapter Kit
1019-00-1114
66 Block Testing Adapter Kit
1019-00-1115
Testers
FEATURES
4
4
www.idealindustries.com
G-3
Section G - DataComm
10/22/08
8:18 AM
Page 4
FIBERTEK™ and TRACETEK™ Advanced Fiber Test Options
n Full duplex talkset capability
n Provides easy switching of LANTEK®
Cable Tester between Copper and Fiber
LAN testing
n Separate loopback testing method for high precision length
n Outstanding Temperature Compensation provides highly accurate
test results in a wide variety of environments
FIBERTEKMMP Multimode Fiber Testing Premium Kit
n All of the features of the FIBERTEKMMB plus TRACETEKMM
(below):
FIBERTEKSMP Singlemode Fiber Testing Premium Kit
n All of the features of the FIBERTEFKSMB Plus TRACETEKSM
(below):
Features of TRACETEK™ Products
4
FIBERTEK – 1300nm MM Adapter
4
FIBERTEK – 1310nm SM Adapter
FIBERTEK – 1550nm SM Adapter
4
TRACETKEK – 1300nm MM Adapter
TRACETKEK – 1310NM SM Adapter
4
Fiber Cleaning Starter Kit
4
62.5/50µm, MM, ST-ST Cable Kit
62.5/50µm, MM, FC-ST/FC-SC Cable Kit
9µm, SM, FC-ST Cable Kit
9µm, SM, FC-ST/FC-SC Cable Kit
4
4
4
4 4
4 4
4
4 4
4 4
4
4
4
4
4
4
4
4
4
TRACETEKSM
4
TRACETEKMM
FIBERTEKALLP
4
FIBERTEKALLB
4
FIBERTEK – 850nm MM Adapter
FIBERTEKSMP
n Enables bi-directional, dual
wavelength measurements
FIBERTEK/TRACETEK PACKAGES
FIBERTEKSMB
n 850nm VCSEL light source enables Gigabit
Ethernet certification on Multimode fiber
FIBERTEKMMB
n Measures signal loss and length
FIBERTEKMMP
Features of FIBERTEK™ Products
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
See your IDEAL representative for additional
specifications on all certification products.
n Enables LANTEK® certification testers to provide an event trace
at a fraction of the price of an OTDR
n Provides easy switching of LANTEK® certification tester between
FIBERTEK™ loss and length measurement and TRACETEK™
n Includes event plots that pinpoint significant losses along the fiber
n Provided with launch cable and appropriate connectors
Testers
G-4
www.idealindustries.com
1-800-435-0705 for Customer Service
Section G - DataComm
10/22/08
8:19 AM
Page 5
DataComm Equipment
SIGNALTEK™ Gigabit Ethernet Certifier
SIGNALTEK™ provides a technically innovative method to test and document performance of voice,
data, video and VoIP applications for cabling installers and network technicians. It tests the link's
ability to support applications by transmitting Ethernet packets on the wire and measuring the link
performance according to IEEE 802.3ab Gigabit Ethernet standard. By monitoring transmitted and
received data packets, it can report the BERT (Bit Error Rate Test) for the link. It uses the latest
generation of Gigabit Ethernet technology to provide the best performance to this new class of testers.
Features of SIGNALTEK™
n Unique - Simulate real world network traffic with full-duplex
gigabit performance testing
n Unique - User selectable 10/100/1000 Bit Error Rate Testing
(BERT) to ensure performance for all Ethernet devices
n Unique - Smart autotest function detects line condition and
automatically chooses appropriate test to run to allow testing
cable that is terminated with a SIGNALTEK remote, a
network device or unterminated
n Unique - Save time using the remote to perform 10/100 or
gigabit service detection AND initiate an Autotest when main
unit is connected
n Unique - Maximum flexibility with two USB ports. Connect
to a computer to upload test results, connect directly to a
printer, or connect a USB memory drive for unlimited storage
Description
Cat. No.
SIGNALTEK™ Kit
33-974
Universal 120-240V Power Adapter
4010-00-0136
RJ-45 to 8 Head Alligator Clip
K-7920
Replacement Cable Accessory Kit - contains all original
cables in SIGNALTEK™ Kit
1219-91-0003
#33-974
n Unique - Get maximum coverage with a full two-year warranty
n Unique - Configure multiple target IP addresses for pinging
several network devices to ensure communications with
servers, printers, IP cameras, home automation controls, etc.
n Offers network interrogation tools such as link establishment,
port LED blink and ping
n TDR to accurately measure length and locate shorts and opens
n ARP test discovers active network devices
Testers
n Exceeds 100m measurement distance required by IEE
802.3ab gigabit Ethernet standard
n Easy-to-read Pass/Fail performance reports that can be
stored and printed for customer documentation
n Multiple BERT configurations for VoIP, data, and video-overIP specific testing
n Brilliant high-resolution color display visible in any lighting
condition
n Uses readily available AA batteries
n Wiremap faults easily with selectable 568 A/B color coding
SIGNALTEK™ Specifications
Cable Types
n Voice/phone cable - USOC/RJ-11/RJ-12 interface
n Data Cable - STP/UTP (RJ-45) for CAT 3/5e/6/6a/7 cabling
n Coax cable - via RJ-45 to F Patchcord, series 6, 59, 58 cabling
(50/75 Ohm)
Physical Dimensions
Ports/Connections
n RJ-45 test interface port
n Mini USB “A” port
n Standard USB “B” port
n DC power input for long-term network monitoring
n Display handset: 7.9” L x 3.6” W x 1.5” D
n Remote handset: 6.8” L x 3.5” W x 1.5” D
n Near-end Weight: 12.5 oz.
1-800-435-0705 for Customer Service
www.idealindustries.com
G-5
Section G - DataComm
10/22/08
8:19 AM
Page 6
SIGNALTEK™-FO Multimedia Ethernet Certifier
SIGNALTEK-FO is the first active ethernet certifier that offers both copper and fiber optic testing; and SIGNALTEK-FO does
it for less than the price of an Optical Test Set alone.
n Fiber Optic and Copper Gigabit Certification – Qualify copper and fiber-optic cabling to IEEE 802.3 standards
n Multimedia Gigabit Certification (Multimode and Single Mode capability) – Qualify short and long range cabling
to a distance of up to 10km
n BERT and Optical Attenuation Measurements – Perform Bit Error Rate Testing and decibel (dB) loss measurements
of optical links.
n Dual Wavelength Capability – available in both 850nm and 1300mn wavelengths to support virtually all LAN and
campus fiber applications.
n Small Form factor Pluggable (SFP) modules are compact, light-weight and field changeable.
n Storage and Reporting for Thousands of Reports – Store and print Qualification reports for copper and fiber jobs
using internal memory or USB “thumb-drives”.
#33-983
Description
Cat. No.
SIGNALTEK™-FO w/850 Modules
33-981
SINGALTEK™-FO w/13X0 Modules
33-982
SIGNALTEK™-FO w/850 & 13X0 Modules
33-983
SIGNALTEK™-FO w/o Modules (Fiber-Ready)
33-987
10 Gigabit Alien Crosstalk Testing Kit
Testers
Perform a standard 6-around-1 cable test with PS ANEXT and PS AACR-F results
for both ends of the cable in as little as 5 1/2 minutes compared to over 20 minutes for
some competitive models.
n Add Alien Crosstalk testing capability to any LANTEK® 6A or 7G
n Perform PS Alien NEXT and Attenuation to Alien Crosstalk Ratio measurements
n Unique Dual-port AXT adapter allows PSANEXT testing with just one handset
for quick initial site testing
n Dual-handset mode allows complete AXT certification 4 times faster
than other AXT test systems
n No PC required in the field - all test results calculated on-the-fly for
instant pass/fail indication
n Kit includes 2 Dual-port AXT adapters, 12 AXT terminators, shielded
patch cords, manual, firmware update and PC reporting software
Description
Alien Crosstalk Testing Kit for LANTEK
G-6
www.idealindustries.com
Cat. No.
LANTEK10GBKIT
1-800-435-0705 for Customer Service
Section G - DataComm
10/22/08
8:19 AM
Page 7
DataComm Equipment
SecuriTEST™ PRO CCTV/Security Tester
SecuriTEST™ PRO adds to the already impressive capabilities of the SecuriTEST™
by including all the features of the original, plus IRE testing (video and sync levels),
audio level testing, a high-capacity lithium ion battery in a package that’s smaller
and lighter than before. The SecuriTEST™ PRO has all the features and
functionality that CCTV technicians need to install, test and maintain analog
security camera systems. SecuriTEST™ PRO also includes a custom carrying
case (optional with the standard SecuriTEST™).
Features of SecuriTEST™ PRO
n All the same features of the
SecuriTEST™ plus:
LED Indicators
UTP Test Port
Audio Input
n NEW - IRE video level and sync tests
n NEW - Sound level test through integrated
speaker and on screen level indicator
PTZ Control Pad
n NEW - High capacity lithium ion battery
N EW
n NEW - Support for additional PTZ protocols
IRE On/Off
n NEW - Carrying case included
Description
Cat. No.
SecuriTEST™ PRO CCTV/Security Tester only
33-892
SecuriTEST™ Tester Pouch only
62-891
Test Lead Ports
Carrying Case (62-891)
SecuriTEST™ CCTV/Security Tester
n Seven Essential CCTV Tools – Combines a CCTV video tester, PTZ camera
LED Indicators
Main Power Switch
controller, Digital Multi-Meter, UTP cable tester, video test pattern generator,
PTZ protocol analyzer and camera programmer in a single compact package.
n Save Time & Money – Test, aim, focus and program cameras when working
alone. Save time by not having to walk back to the control center to verify
functionality of each camera.
n Compact Design – Combines all the most needed—security tools in a
lightweight, easy-to-carry unit. Sharp, bright 2.5in (6.3cm) color LCD screen
with on-screen displays for PTZ
control/diagnostics and DMM
readouts.
n PTZ Protocol Analyzer –
PTZ Control Pad
Test Lead Ports
Compatible with 20+ PTZ
protocols to test and program
cameras in the field. Decodes
and identifies output from
PTZ console to aid in
troubleshooting.
Description
Cat. No.
SecuriTEST™ CCTV/Security Tester only
33-891
SecuriTEST™ Tester Pouch only
62-891
1-800-435-0705 for Customer Service
Includes: Rechargeable batteries,
AC charger, car charger, test leads,
wiremap terminator, neck strap and
manual.
www.idealindustries.com
G-7
Testers
CCTV installers often need to carry a variety of testing tools to complete their work.
SecuriTEST combines the most-needed tools in one easy-to-carry package. Since all
connections (video/communications/DMM) attach to a single unit, SecuriTEST
eliminates the need to juggle several devices while on a ladder or lift, making working
conditions safer and increasing productivity.
Section G - DataComm
10/22/08
8:19 AM
Page 8
LinkMaster™ PRO and LinkMaster™ PRO XL Testers
The LinkMaster™ PRO & LinkMaster™ PRO XL Testers enable
installers, contractors and maintenance technicians to map, test
and troubleshoot data and voice communication cable and coax
runs. Rugged, versatile, and easy-to-use, they have mastered the
link between performance, simplicity and value for both commercial
and residential applications.
Features
LinkMaster™
PRO
Description
LinkMaster™
PRO XL
Blinks the hub
n
Remotes have both RJ-11 and RJ-45 jacks
Backlight LCD screen
n
n
Displays length measurement with test results
n
Measures length on UTP, STP and coax
n
n
Tests UTP for shorts, opens, miswires, reversals,
split pairs and shield continuity
n
n
n
n
Test coax for opens, shorts and continuity
Shows wiring errors
n
Tests and identifies with all eight twisted pair
and coax remotes
n
n
n
n
n
n
Sends tone with four different signals
Displays test results in wire map format
Snap-off battery cap
n
n
9 volt battery included
n
n
n
Remote Jack for Patch Cords
Main Jack for all Testing
Larger Backlit LCD
Screen
Six Modes of Operation
• Cable Test
• Hub Blink
• Tone
• Length
• Coax
• Setup Mode
Press SEL to:
• Turn on back-light (Hold 2 sec)
• Execute current displayed mode
• Start new test cycle
• Select one of four tones
• Change pair being measured
for length
• Change user selectable options
– Beep On/Off
– Unshielded or Shielded Cable
– Units—Feet or Meters
Arrow Keys
• To change length constant
• To change pair or pin selection for tone
• To scroll through setup selectable options
Accessories
Description
Cat. No.
LAN Cable Testers
RJ-45 to RJ-11Jack Adapter (2/card),
POP Packaging
LA-4233
RJ-45 to F-Connector Adapter (2/card),
POP Packaging
LA-4234
LinkMaster™ Pro XL Remotes UTP/STP,
2-8 only (white carton)
LA-4235
LinkMaster™ Pro XL Large Replacement Case
H-3412
Security/Speaker Kit – 8-Position Modular
Adapter and eight RJ-45 to Alligator Clip
Lead Sets
LA-4157
BNC Accessory Kit
LA-4173
Kits
Description
LinkMaster™ PRO XL Kit w/eight
remotes
LinkMaster™ PRO XL Kit w/eight
remotes and Tone & Probe
LinkMaster™ PRO XL Kit w/eight
remotes – International Packaging
LinkMaster™ PRO XL Economy Kit
w/one remote
G-8
Cat. No.
33-880
33-881
33-886
33-887
LinkMaster™ PRO Kit w/eight
remotes – Unshielded Jumper Cables
33-825
LinkMaster™ PRO Kit w/eight
remotes – Shielded Jumper Cables
33-826
Set of Eight Color-Coded F-Terminators for
LinkMaster™ Pro or Pro XL
LA-4159
LinkMaster™ PRO Economy Kit w/one
remote – Unshielded Jumper Cables
33-835
LinkMaster™ Pro Large Replacement Case
H-3324
LinkMaster™ PRO Economy Kit w/one
remote – Shielded Jumper Cables
33-836
Replacement Economy Kit Case
H-4868
www.idealindustries.com
1-800-435-0705 for Customer Service
Section G - DataComm
10/22/08
8:20 AM
Page 9
DataComm Equipment
VDV MultiMedia Cable Tester
Amplifier Probe and Tone Generator
Easy-to-use tester for installers working
with voice, data and video applications.
One tester for all applications!
NEW
Design
n Voice — supports 3-pair USOC
and 6-position RJ-11/12 jacks for
telephone cable testing
n Data — supports both shielded and
unshielded cable testing to T568A/B
(RJ-45)
62-164
n Video — tests coax cable for opens
Amplifier Probe
and shorts with F-connector interface
n Identifies and traces wire or cables within a group
n Tests for opens, shorts, miswires,
n Battery low indicator
reversals and split pairs. Also indicates
correct wiremap. Has automatic shut
off (to prolong battery life) and low
battery indicator.
Tone Generator
n Easy-to-read LCD display with “PASS/FAIL” indicator after each
test
n Tone generator supports four different tones making fault isolation
easier
n One remote wiremap and testing unit is stored inside tester —
easier to keep all parts together
n Uniquely designed remote accommodates RJ-11, RJ-45 and
F-style connectors
Description
Cat. No.
Kit with integrated remote and accessories
33-856
n Emits three different types of tones
n Auto-off after three hours of non-use
n F-Connector port for toning & tracing coaxial CATV cabling
systems
n Tone can be added in any status
Description
Cat. No.
Amplifier Probe
62-164
Tone Generator
62-160
Amplifier Probe & Tone Generator Kit - includes 62-164, 62-160,
Lead Set, Cable Assembly & Standard Replacement Tip
33-864
LinkMaster™ Tester
TRACETone™ Tone Generator &
Amplifier Probe
of installed wire and cable
n Two selectable tone styles
n Tone Generator & Amplifier
Testers
Tests wiring configurations on
UTP/STP cables. Checks for
shorts, miswires, reversals and
split pairs. Debug feature,
automatic shut-off and low
battery LED indication.
n Test continuity and locate signal
n Designed to test installed
Probe fit together for easy storage
twisted pair wiring
n Extra-deep serrations grip wire better
n Tests unshielded and shielded
n RJ-11 Alligator Clip, RJ-11 Cable Assembly included
modular plugs
Description
Cat. No.
TRACETone™ Tester and Accessories
62-140
Also available in these kits:
33-916
62-160
NEW
Design
n Main unit and remote allow one
person testing
Description
Cat. No.
LinkMaster™ Tester and Remote
62-200
33-917
Smart6™ Modular Tester
n 6-position Tester
n Incoming call identification
1-800-435-0705 for Customer Service
Description
Cat. No.
Smart6™ Modular Tester
62-096
www.idealindustries.com
G-9
Section G - DataComm
10/22/08
8:20 AM
Page 10
OmniSeal™ Pro Compression Tools
The new IDEAL OmniSeal™ Compression Tools now offer additional features and increased
connector compatibility in a smaller, more compact tool designed to meet the demands of
the professional installer. (OmniSeal requires no accessory attachment to terminate IDEAL
branded compression connectors.) Most other manufacturers compression connectors
can be terminated with an easy plunger depth adjustment. The simple intuitive design
combined with its size and universal connector acceptance makes this the only
compression tool needed by professional installers.
OmniSeal Pro
30-603
n Factory preset to work with IDEAL compression connectors
OmniSeal Pro XL
n Compresses F-type, RCA, BNC and Mini connectors
30-793
n Adjustable to fit other manufacturer’s connectors — no accessory
adapters required
n Connectors approved for use by satellite and cable TV companies
Description
OmniSeal™ Pro XL Compression Tool
Qty.
1
Cat. No.
30-793
1
30-603
OmniSeal™ Pro Compression Tool
BNC
F-Type
RG11
RCA
Mini Coax
OmniSeal™ Pro XL
30-793
OmniSeal™ Pro
30-603
User-friendly spring
loaded handle
Textured Santoprene™
slip resistant comfort
grip
Convenient
handle lock
for easy fit
in pouch
Compresses F-type,
Mini F-type, RCA, and
Mini RCA connectors
Compression Tools
High strength aluminum
body for durability
and long life
Handy 7/16”
hex socket
for easy
connector
to cable
installation
For BNC
connectors
(Model 30-793)
Adjustable to fit
multiple cables
and connectors
Also available in these kits:
33-630
33-624
33-945
Economy Compression Tool
n Easily compresses series 6 and 59 coax
compression F-connectors
n Permanent connection – never
comes loose
n Works with most brands of
Description
Cat. No.
Economy Compression Tool
30-633
Economy Compression Tool Kit - Includes four RG-6 Connectors
33-633
compression connectors
G-10
www.idealindustries.com
1-800-435-0705 for Customer Service
Section G - DataComm
10/22/08
8:21 AM
Page 11
DataComm Equipment
Crimpmaster™ Crimp Tools & Die Sets
High quality ratchet-type crimp tool for electricians, contractors and installers who require guaranteed repeatability of good mechanical and
electrical connections.
Dies change quickly and easily
with a screwdriver.
Interchangeable dies
provide versatility
in a single tool
Cat. No.
Crimpmaster™ Crimp Tool Frame
30-506
Also available in these kits:
Crimp release provides
operator safety
33-400
33-917
Ratchet crimp action
provides repeatable and
reliable terminations
30-556
RJ-11 Crimp Tool for two, four or
six-position modular plugs
Tool w/die N/A
30-577
N-Series and RG-8/11 Connectors
(Hex, 0.429 (10.90mm), 0.100
(2.54mm), 0.080 (2.03mm)
Tool w/die 30-482
30-587
RG-58, RG-174 and RG-8218 for both
50 and 75 ohm cables (Hex 0.213
(5.41mm), 0.178 (4.52mm), 0.068
(1.73mm), 0.042 (1.07mm)
Tool w/die N/A
30-559
RJ-45 Eight-position Crimp Tool
for keyed or non-keyed modular
plugs
Tool w/die 30-522
30-578
RG-59, RG-6, and 8281 50 and 75
OHM cables (Hex, 0.324(8.23mm),
0.255 (6.48mm), 0.068 (1.73mm),
0.042 (1.07mm)
Tool w/die 30-483
30-591
Plenum and Non-Plenum Thinwire
Cables RG-58 and 59 (Hex, 0.213
(5.41mm), 0.190 (4.83mm), 0.068
(1.73mm), 0.042 (1.07mm)
Tool w/die N/A
30-560
RJ-45 Eight-position Crimp Tool
for AMP RJ-45 modular plugs
Tool w/die 30-521
30-579
22-10 AWG (.324mm2 - 5.261mm2)
insulated terminals/color coded
nests
Tool w/die 30-500
30-593
Mini UHF and BNC/TNC 5 cavity
(Hex, 0.052 (1.32mm), 0.068 (1.73mm),
0.100 (2.54mm), 0.213 (5.41mm),
0.255 (6.48mm)
Tool w/die N/A
30-570
RG-6, RG-174, Belden-Type
RG-8281 cables (Hex. 0.324
(8.23mm), 0.178 (4.52mm),
0.068 (1.73mm)
Tool w/die N/A
30-580
22-8 AWG (.3mm2 - 8mm2)
non-insulated terminals
Tool w/die N/A
30-594
Fully Insulated quick disconnect
terminals with thinner wire barrels
22-10 AWG (.324mm2 - 5.261mm2)
Tool w/die N/A
30-572
16-26 AWG (1.31mm2 - .128mm2)
miniature insulated rings, spade
and butt splices
Tool w/die N/A
30-581
RG-58, RG-59/62, BNC/TNC Coax
Connectors (Hex, 0.255 (6.48mm),
0.213 (5.41mm), 0.068 (1.73mm)
Tool w/die 30-502
30-599
30-18 AWG (.205mm2 - 2.08mm2)
Open Barrel Pins and Sockets
Tool w/die N/A
30-573
Cambridge CP-88, CP-89 BNC/TNC
coax connectors with RG-58,
RG-59/RG-62 AU cables (Hex 0.305
(7.75mm), 0.068 (1.73mm), 0.228
(5.79mm)
Tool w/die 30-481
30-582
F-type CATV RG-59, RG-6
Connectors (Hex, 0.350 (8.89mm),
0.320 (8.13mm), 0.255 6.48mm)
Tool w/die 30-503
30-479 (Tool w/die)
For insulated terminals, 22-10 AWG
with built-in locator
30-576
RG-174, Mini 59 BNC/TNC
Connectors (Hex, 0.178 (4.52mm),
0.128 (3.25mm), 0.068 (1.73mm)
Tool w/die 30-485
30-586
22-12 AWG (.324mm2 - 3.31mm2)
Non Insulated Open Barrel
Connectors, Commercial Type
Tool w/die N/A
1-800-435-0705 for Customer Service
www.idealindustries.com
Crimp Tools/Die Sets
Pressure adjustment
for actuation force
Description
G-11
Section G - DataComm
10/22/08
8:21 AM
Page 12
Punch Down Tools
35-485
35-492
35-495
110 Blade
35-185
35-497
66 Blade
35-407
110/66 Blade
35-478
Krone® Blade
Impact Turn-Lock™ Punch Down Tools
Cat. No.
Punchmaster™ II Punch Down Tool - body only
35-483
Punchmaster™ II Punch Down Tool w/110 blade
35-485
Punchmaster™ II Punch Down Tool w/66 blade
35-487
Non-Impact Turn-Lock™ Punch Down Tools
Cat. No.
Also available in these kits:
Punch Down Tool w/110 blade
35-492
33-505
Punch Down Tool w/66 blade
35-493
Economy Punch Down Tool
Cat. No.
Non-impact Tool w/permanent non-cut blade
35-185
Removable Blades*
Cat. No.
110 Turn-Lock™ blade
35-495
66 Turn-Lock blade
35-497
110/66 combo blade w/cutting edges
35-407
Krone blade
35-478
Bix® blade
35-479
®
35-479
Bix® Blade
33-705
*Not applicable for Economy Punch Down tool.
Bix® is a registered trademark of Nortel. Krone® is a registered trademark of Krone, Inc.
Ratchet Telemaster™
Telemaster™ Telephone Tools
n Ratchet version of popular
Telemaster™ Tool for RJ-45
and RJ-11 modular plugs
n Multi-function telephone
tool cuts, strips and crimps
for easy one-tool application
n Steel frame for long-term durability. (Crimps primary modular
plug strain relief only)
n For paired conductors
n For paired conductors
Tools
n Repeatable crimp action for
consistent, high quality connections
Description
Description
Kit
Cat. No.
Tool Only
Cat. No.
Tool for RJ-11 (1, 2, 3 pair) and RJ-45 (4 pair) Plugs
Cat. No.
Ratchet Telemaster™
30-696
Replacement Cut & Strip Blade Set for 30-696
LA-4102
Modular Plug Tool Kit
n Multi-function telephone/network
tool; cuts, strips and crimps
n Steel frame construction
for durability
n Interchangeable dies allow for
crimping RJ-45 and RJ-11 modular plugs
33-700*
30-496
Tool for RJ-45 (4 pair) & DECconnect MMJ (RJ-11, 3 pair)
N/A
30-497
Tool for RJ-11 (1, 2, 3 pair) & DECconnect MMJ
(RJ-11, 3 pair)
N/A
30-498
Tool for RJ-22 (handset) and RJ-11 (1, 2, 3 pair)
N/A
30-499
Replacement Cut and Strip Blade Set for Telemaster™
N/A
LB-1747
Kit includes 10 each, RJ-45 8P8C, RJ-11 6P6C and RJ-11 6P4C modular plugs.
Also available in these kits:
33-704
n Tool-less die change for added convenience
33-750
n Spring return handle for comfort
Description
Cat. No.
Modular Plug Tool Kit
33-296
G-12
www.idealindustries.com
1-800-435-0705 for Customer Service
Section G - DataComm
10/22/08
8:21 AM
Page 13
DataComm Equipment
D-Sub/Double-D Service Tool
Kinetic Super™ Wire
Stripper/Crimper
n Exact replacement of the AMP openbarrel service tool for stamped
contacts and D-Sub contacts
n Easily cuts and strips
22 to 24 AWG solid
wire
n Also crimps
Double-D, high
density, miniature
contacts
Description
Cat. No.
Kinetic Super™ Wire Stripper/Crimper
45-719
4-Way Indent Crimp Tools
Crimp solid barrel contacts for
RS232 interface connectors.
Feature four-way indent dies
(per MS22520 specifications),
full cycle ratchet, built-in pin and
socket locator and comfort-grip handles.
n Includes openings for crimping insulated terminals and cutters for
machine screws
Description
Cat. No.
D-Sub/Double-D Service Tool
30-426
Coax Strip and Crimp Tool
35-465
n High-grade steel construction for outstanding performance
Description
Cat. No.
20-26 AWG (.519 mm2 - .128 mm2) RS232 D-sub
Round Barrel Contacts, Pins or Sockets
35-465
16-22 AWG (1.31 mm2 - .324 mm2) Round Barrel
Contacts, Pins, Sockets and Deutsch 16 Pin Contacts
35-466
Trompeter BNC Connector Center Pins
35-468
n Precision, form-ground stripping
holes remove outer jacket
and insulation from
RG-59 and RG-6
coaxial cable
n Durable blades cut
copper-coated steel
conductors
n Three crimping nests for crimping F-connectors and ring terminals
n Cushioned, comfort-grip handles
Description
Cat. No.
30-433
Coax Strip & Crimp Tool Kit w/ten RG-6 F-Connectors
30-433F
Tools
Coax Strip & Crimp Tool
1-800-435-0705 for Customer Service
www.idealindustries.com
G-13
Section G - DataComm
10/22/08
8:22 AM
Page 14
UTP/STP/Coaxial Cable Strippers
Multi-Strip Coax/UTP Cable Stripper
n Adjustable blades can be set for any depth to help ensure nickfree stripping and slitting of cables
n Strips UTP, RG-59 and RG-6 coax cable
n Provides a 1/4 in. (minimum) x 1/4 in.
strip on coax
n Spare cartridge compartment
provided
n Push-on ring for easy
connector termination
45-164
Description
Cat. No.
Coax/UTP Cable Stripper
45-603
RG-6/59 Replacement Cartridge
LB-2726
RG-7/11 Replacement Cartridge
LB-2728
UTP Replacement Cartridge
LB-2727
Coax Stripmaster® Wire Strippers
n Provides precision stripping with easy spring
cushion grip
n Knife-type blades feature multiple hole
diameters sized for two step removal of outer
jacket insulation and center conductor
45-162
45-163
45-165
Coax Cable
Type (RGU)
Repl. Blade
Cat. No.
Cat. No.
Coax Stripmaster® for RG-6
RG-6
LB-740
45-262
Coax Stripmaster for RG-59
RG-59
LB-743
45-265
RG-6
Quad Shield
LA-3953
45-282
Description
Typical
RG Cables
Cat. No.
RG-174,
RG-187
45-162
(Gray)
RG-58,CB
Mini Coax
45-163
(Blue)
Coaxial Cable Stripper, 1/4 in. (6.4mm) to
9/16 in. (14.3mm) O.D.
RG-11, RG-8
45-164
(Blue)
Cable Stripper, 3/16 in. (4.8mm) to 5/16 in.
(8mm) O.D.
RG-59,
UTP Cable
45-165
(Black)
__
L-9225
Description
Cat. No.
L-9226
Mini Coax Stripper
45-529
Description
Coaxial Cable Stripper,
up to 1/8 in. (3.2mm) O.D
Coaxial Cable Stripper,
1/8 in. (3.2mm) to 7/32 in. (5.556mm) O.D.
Strippers
Replacement Blade Set* for 45-162,
45-163, 45-165
Replacement Blade Set* for 45-164
__
®
Coax Stripmaster® for RG-6
Quad Shield
Mini Coax Stripper
n Adjustable stripper for mini
coax cable
n Provides a 1/4 in. x 1/4 in.
strip
*A set of blades consists of three straight blades and one round blade.
RG-11 Coax Strippers
N EW
n RG-11 45-011 Coax Stripper - for use with IDEAL RG-11 push-on
connectors, provides a 1/4 in. x 1/8 in. strip
n RG-11 45-111 Coax Stripper - for use with IDEAL RG-11
compression connectors, provides 1/4 in. x 1/4 in. strip
Description
Cat. No.
RG-11 Coax Stripper for Push-On Connectors
45-011
RG-11 Coax Stripper for Compression Connectors
45-111
45-011
45-111
G-14
www.idealindustries.com
1-800-435-0705 for Customer Service
Section G - DataComm
10/22/08
8:22 AM
Page 15
DataComm Equipment
Coax Cable Stripper
Toggle® Coax Strippers
n For RG-6, RG-6 Quad and RG-59
n No adjustment required
n Strips center conductor and
cable jacket
n Toggle® Tools for stripping Ethernet,
Thinnet, RG-62 or RG-59 coax cable
and other cable sizes
Description
Cat. No.
Coax Cable Stripper
45-320
Coax Connector Kit w/four Push-On F-Connectors
33-320
Description
Coax Stripper for RG-8/11U
Coax Stripper for RG-6
Cat. No.
45-510
45-513
UTP Cable Stripper
Cyclops® Data Cable Stripper
n Strips Cat 3, 5, 5e & 6 cables
n Fast, easy removal of outer sheath
insulations (PVC and Plenum types,
UTP & STP)
n One-step stripping
Description
UTP Cable Stripper
Cat. No.
Description
Cat. No.
45-167
Data Cable Stripper for unshielded and shielded twisted pair cable
45-514
Round Cable Slitting and Ringing Tool
Simplex/Duplex 3mm
Jacket Stripper
n Cuts around cable jacket as well as
slits the length of jacket for
easy removal
n Use with single or multiple
conductor cable up to
1.75 in. O.D.
n Blade adjusts for jacket thicknesses up to .125 in.
n Spare blade in handle base
n Designed to remove the jacket from 3mm Simplex or Duplex (zip
cord) fiber optic cable
Cat. No.
Round Cable Slitting and Ringing Tool
45-144
Replacement Blades for 45-144 (2/pkg.)
LB-1748
n Form-ground, knife-type blades for accurate easy stripping without
damaging the fiber or Kevlar® strength member
n Contoured, comfort-grip handles to reduce operator fatigue
Description
Cat. No.
Simplex/Duplex 3mm Jacket Stripper
45-349
Note: Kevlar® is a registered trademark of DuPont.
Coax Strippers
n Specific adjustments
needed for each cable
size
Description
Replacement
Cassette
Cat. No.
1/4 in. x 1/4 in. standard strip.
Coax Stripper - 2 Step
• For most IDEAL compression connectors and
single crimp/twist-on BNC/TNC
• Strips 0.250 in. or 6.35mm
45-524
(Blue)
45-526
Coax Stripper - 3 Step
• For crimp BNC and TNC connectors
• Strips braid 0.240 in. or 6mm and
Dielectric 0.240 in. or 6mm
45-522
(Black)
45-520
Coax Stripper - 3 Step
• For dual crimp BNC/TNC and Thinnet BNC conn.
• For 735A Belden® cable
• Strips braid 0.328 in. or 8.2mm and
dielectric 0.109 in. or 2.7mm
1-800-435-0705 for Customer Service
45-523
(Brown)
1/4”
1/4”
45-521
www.idealindustries.com
G-15
Strippers
Description
Section G - DataComm
10/22/08
8:22 AM
Page 16
Data T®-Cutter
n Cuts round communication cable and maintains cable geometry for
better cable performance
n Cuts multi-pair cable up to .500 in. (12.7mm) and coaxial cable up to
RG-9/U
45-074
n Suitable for soft cables (not ACSR)
n Steel reinforced center conductors can be trimmed with bolt cutting
holes
n Locking latch keeps tool closed in pouch
n Data T®-Cutter II designed for RG-59 and RG-6 coaxial cable
45-075
Description
Cat. No.
Data T®-Cutter
45-074
Data T -Cutter II
45-075
®
Electrician’s Scissors
35-093
35-088
n Designed for use in telephone and electrical service applications
n Cut up to 16 AWG solid and 12 AWG stranded wire
n Serrated surface on back blade edge cleans wire
n Electrician’s Scissors with stripping notches strip 19 and 23 AWG wire
35-089
Cutters/Scissors
Description
Cat. No.
Electrician’s Scissors w/stripping notches
Electrician’s Scissors
Cable Splicing Knife and Leather Holder
Leather Knife Holder Only
Cable Splicing Kit (Scissors, Splicing Knife, Leather Holder)
Leather Holder only for Scissors and Knife
35-088
35-089
35-091
35-092
35-093
35-094
Lever™ -Snips Electrician’s Scissors
with Stripping Notches
Economy Round Cable
and Wire Cutter
n Ergonomic design gives
n Cuts multi-conductor cable
up to .500 in. (12.7mm)
and solid or stranded
wire up to #8 AWG
(10mm2)
added leverage
n Spring-action, mechanical
advantage increases stripping
leverage and reduces operator fatigue
n Built-in return spring, locking latch
n Double plated for added rust protection
n Stamped, hardened steel frame with curved cutting blades
n Extra-deep serrations grip wire better
Description
Cat. No.
Electrician’s Scissors with Stripping Notches
35-087
Also available in these kits:
33-917
G-16
33-623
www.idealindustries.com
Description
Cat. No.
Multi Conductor Cable to .500 in. (12.7mm)
Solid or Stranded
35-051
Center Conductor Cutter
n Trims coax center conductor to
3/16 in. (4.8 mm) length for
proper installation into a dual
crimp coax connector.
Description
Cat. No.
Center Conductor Cutter
35-060
1-800-435-0705 for Customer Service
DataComm Equipment
Surge Suppression Cable Splitters
4-Way Digital Surge Suppression Cable Splitters withstand a one-time surge up to 6KV on cable line
Q Bandwidth: 5 MHz - 1 GHz
Q Impedance: 75 ohm
Q Over 130 dB of RFI Shielding
Q Low 8 db Insertion Loss
Q PCB Printed Circuit Board Design
Q Nickel Plated Housing
Q Splits signals up to 4 outlets
Description
Cat. No.
2-Way Surge Suppression Splitter
85-135
4-Way Surge Suppression Splitter
85-137
Terminators (85-038) needed for all unused
ports for optimal performance
Grounding Blocks
85-311
85-313
Q Solid zinc alloy, nickel plated and chromate finished
Q High Performance beryllium copper contact
Description
Q Excellent electrical performance 0 - 3,000 MHz
Q Dual grounding holes can accept up to #6 wire
Q UL/CSA approved
Qty.
Cat. No.
3 GHz Double Grounding Block
1/card
85-311
3 GHz Quad-Square Grounding Block
1/card
85-313
Splitters
Satellite and Digital TV Splitters
85-132
85-134
85-332
85-333
85-334
Q Designed for easy mounting over cable
Q All ports are F female connectors, 75Ω
Q Two grounding screws eliminate the need for grounding block
Q Single port power pass
Description
Quantity
Cat. No.
CATV Cable Splitter, 5-900 MHz, 2-Way
CATV Cable Splitter, 5-900 MHz, 3-Way
CATV Cable Splitter, 5-900 MHz, 4-Way
Card of 1
Card of 1
Card of 1
Card of 1
Box of 10
Card of 1
Box of 10
Card of 1
Box of 10
85-032
85-033
85-034
85-132
86-132
85-133
86-133
85-134
86-134
High Performance Cable Splitter,
5MHz-1GHz 2-Way
Description
2-Way, 5MHz - 2.3GHz
Qty.
1
Cat. No.
85-332
High Performance Cable Splitter,
5MHz-1GHz 3-Way
3-Way, 5MHz - 2.3GHz
1
85-333
4-Way, 5HMz - 2.3GHz
1
85-334
High Performance Cable Splitter,
5MHz-1GHz 4-Way
Diplexer, 2.3 GHz
Digital Cable Splitter
Q Combine or split cable/antenna signals
Q Nickel-plated housing
with satellite signals
Q High-performance impedance-balanced
Q High quality PCB design
Printed Circuit Board design
Q Nickel-plated die-cast zinc housing
Q Bandwidth: 5MHz - 1 GHz Impedance: 75 Ohm; over 120 dB of
RFI shielding; Splits signals up to 8 outlets
Q Grounding hole for up to 6 AWG wire
Description
Cat. No.
Description
Cat. No.
Diplexer, 2.3 GHz, SATV/TV Combiner Splitter - 2 Amp
85-323
Digital Cable Splitter, 8-Way
85-138
1-800-435-0705 for Customer Service
www.idealindustries.com
G-17
Splitters
85-133
Section G - DataComm
10/22/08
8:32 AM
Page 18
N EW
Compression Connectors for Every Application
Reg/Tri/Quad & Plenum F-Connectors
•
•
•
•
•
Fits 60% regular, tri-shield and quad cables
Nickel-plated, brass-construction for superior corrosion resistance
Approved for use by satellite and cable TV companies
Approved for indoor and outdoor use
Use 30-603, 30-793 or 30-633 Compression Tools
RG-11 F-Connectors
• Fits 60% regular RG-11 cable
• Nickel-plated, brass-construction for superior corrosion
resistance
• Approved for use by satellite and cable TV companies
• Approved for indoor and outdoor use
• Use 30-603 or 30-793 Compression Tools
BNC Connectors
•
•
•
•
•
•
Nickel-plated, brass-construction for superior corrosion resistance
Moisture-inhibiting design
Approved for indoor and outdoor use
Use 30-793 Compression Tool
75 Ohm nominal impedance
Gold-plated pin contact area
OmniCONN™ F-Connectors
• Non corrosive nickel plated brass body and polycarbonate bushing
• Delrin/Nylon adapter sleeve and o-ring provide double protection for
a watertight seal
• Free spinning hex nut for ease of installation onto all 7/16 ports
• 75 ohm nominal impedance
• Bandwidth up to 3 GHZ
RCA Connectors
•
•
•
•
Constructed of nickel plated brass and gold plated head
75 ohm nominal impedance
Bandwidth up to 3 GHZ
Compatible with 30-603 and 30-793 Compression Tools
Mini RCA Connectors
•
•
•
•
For use with most 21-25 AWG mini coax cable
Body is nickel plated for outstanding corrosion resistance
Mini RCA head is gold plated for superior contact performance
Bandwidth is 5 MHz - 3 GHz, Impedence is 75 Ohms (nominal),
return loss min. -30 dB @ 3 GHz
F-Connector
RCA Connector
G-18
www.idealindustries.com
1-800-435-0705 for Customer Service
Section G - DataComm
10/22/08
8:32 AM
Page 19
DataComm Equipment
Connector Type
Cable Type
RG-6
Reg/Tri/Quad
F
RG-6
Plenum
F
RG-59
Reg/Tri/Quad
F
F
RG-11
F
RG-6
F
RG-6
Quad
BNC
RG-6
BNC
RG-59
RCA
RG-6
Qty.
Cat. No.
Card of 4
92-654
Card of 10
92-651
Jar of 50
92-650
Jar of 100
92-656
Box of 1,500
92-659
Jar of 50
92-660
Box of 1,500
92-669
Jar of 50
92-610
Box of 1,500
92-619
Card of 10
89-211
Box of 500
89-1211
Card of 4
89-017
Jar of 50
89-044
Card of 4
89-018
Jar of 50
89-045
Card of 15
89-048
Jar of 35
89-5048
Card of 15
89-047
Jar of 35
89-5047
Card of 10
89-582
Jar of 35
89-580
Card of 10
89-572
Jar of 35
89-570
RCA
RG-59
F
Mini
Card of 10
89-014SM
RCA
Mini
Card of 10
89-014SMRCA
Compression Port Seals
n Used with compression F-connectors to weatherproof connector
by placing onto the female port
n Made from EPDM for superior sealing
Description
Qty.
Cat. No.
Short Sleeve Compression F-Connector Port Seals
Bag of 100
89-126
Long Sleeve Compression F-Connector Port Seals
Bag of 100
89-127
Long Sleeve
Also available in these kits:
33-635
1-800-435-0705 for Customer Service
33-630
Short Sleeve
33-620
www.idealindustries.com
G-19
Connectors/Port Seals
Compression Connectors
Section G - DataComm
10/22/08
8:33 AM
Page 20
F-Type Coaxial Connectors
F-Series Connectors utilize threaded couplings and cable conductors as contacts for CATV and other UHF applications.
Connector Type
Cable Type
Termination Type
Quantity
Cat. No.
Card of 4
Card of 10
Card of 50
Box of 100
Card of 4
Card of 10
Card of 50
Box of 100
Card of 4
Card of 10
Card of 50
Card of 4
Card of 10
Card of 50
Box of 100
Card of 4
Card of 10
84-017
85-037
85-017
86-017
84-030
85-057
85-030
86-030
84-016
85-036
85-016
84-039
85-053
85-039
86-039
84-018
85-035
F
RG-6
Crimp
F
RG-6 Quad
Crimp
F
RG-59
Crimp
F
RG-6
Twist-On
F
RG-59
Twist-On
F
N/A
N/A
Card of 10
85-031
F
N/A
N/A
Card of 10
85-038
Push-On F-Connectors, RG-6 & RG-59
Push-On F-Connectors, RG-11
n Tool-less design - cuts, strips and pushes on to cable
n Fits regular RG-11 cable
n All brass nickle-plated construction
n Knurled nut for superior grip
require a compression or
crimp tool
n Integral pin with center
Connector Type
Cable Type
Qty.
Card of 4
Cat. No.
85-065
F
RG-6
Jar of 50
85-165
Box of 1,500
85-1165
Card of 4
85-066
RG-6 Quad
F
conductor seizing
mechanism
n Manufactured from solid brass,
nickle-plated for durability
n 9/16 in. hex nut
n Use 45-011 1/4 in. x 1/8 in. Coax Stripper
Jar of 50
85-166
Box of 1,500
85-1166
Card of 4
85-067
Description
RG-11 Push-on F-Connector
Qty.
Card of 10
Cat. No.
85-111
Jar of 50
85-167
RG-11 Push-on F-Connector
Box of 500
85-0111
Box of 1,500
85-1167
RG-59
Description
Coax Connector Kit w/Economy Coax Stripper and four
RG-6 Push-on Connectors
Cat. No.
33-320
Connector Removal Tools
n New comfort grip handle aids in installing and removing connectors on coax cable
Cat. No.
F & BNC Coax Connector Removal Tool - 8 in.
35-046
35-042
F & BNC Coax Connector Removal Tool - 16 in.
35-043
G-20
www.idealindustries.com
35-046
I F E TI M
• IDEAL •
UA
G
F & BNC Coax Connector Removal Tool - 12 in.
35-042
E
Description
35-043
EE
n Works on compression and hex connectors
L
Connectors
n For indoor use
F
N EW
n Innovative design does not
R ANT
1-800-435-0705 for Customer Service
Section G - DataComm
10/22/08
8:33 AM
Page 21
DataComm Equipment
BNC Coaxial Connectors
IDEAL coaxial connectors are available in two grades. A premium specification grade features precision machined brass bodies with nickel
plating. The commercial grade consists of machined diecast components with nickel plating. A variety of connectors handle different
termination types, cable size, impedance rating and attachment means.
n Connector construction covers both plenum and non-plenum cable jackets
n Captive gold center contacts provide maximum conductivity and minimal resistance
n Nickel plating resists corrosion, tarnish and ensures signal quality
n Meets military specifications. MS39012 and MIL202 where applicable.
n Available in both small and bulk quantities to suit a range of application requirements
Connector
Type
Cable
Type
Center
Conductor
BNC Plug
RG-58
20 AWG Solid
Jacket
Connector
Impedance
Connector
Grade
Insulation
Commercial
NonPlenum
50 Ohm
Model
Qty.
Cat. No.
IA-3620
Bag of 5
85-490
IA-3621
Bag of 5
85-491
Bag of 5
85-502
Box of 100
86-502
Delrin
Specification
NonPlenum
IA-3617
Plenum
IA-3618
Bag of 5
85-512
IA-3624
Bag of 5
85-513
IA-3626
Bag of 5
85-515
IA-3592
Bag of 5
85-517
IA-3634
Bag of 5
85-545
IA-3636
Bag of 5
85-550
20 AWG Solid
BNC Plug
RG-59
22-23 AWG Solid
Delrin
Plenum
NonPlenum
RG-6
Commercial
50 Ohm
Specification
18 AWG Solid
NonPlenum
BNC Plug
75 Ohm
Specification
Delrin
Belden
8281
20 AWG Solid
BNC Jack
RG-59
22-23 AWG Solid
NonPlenum
75 Ohm
Specification
Teflon
IA-3638
Bag of 5
85-553
BNC
Terminator
—
—
—
50 Ohm
Specification
Delrin
IA-3641
Bag of 5
85-556
BNC Tee
Adapter
—
Jack to Plug
—
50 Ohm
Commercial
Delrin
IA-3667
Bag of 5
85-588
BNC Adapter
—
Jack to Jack
—
50 Ohm
Specification
Delrin
IA-3668
Bag of 5
85-590
BNC
Twist-on Plug
RG-59
22-23 AWG Solid
NonPlenum
50 Ohm
Commercial
Delrin
IA-3677
Bag of 5
85-480
1-800-435-0705 for Customer Service
www.idealindustries.com
G-21
Connectors
75 Ohm
NonPlenum
Wall Plates
Telephone Wall Plates are listed and approved by the Underwriter’s
Laboratories and contain 50 micro inches of gold plating on the contacts.
Telephone Wall Plates - Standard Size - (2-3/4 in. x 4-1/5 in.)
Description
Color
Almond
Qty.
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Cat. No.
85-206
86-206
85-207
86-207
85-223
86-223
White
Box of 100
86-219
White
Box of 100
Card of 1
Box of 100
86-201
85-205
86-205
Ivory
RJ-11, 2 Pair
RJ-11, 2 Pair
Wall Mount Plate
CATV Coax
Combo CATV/RJ-11
White
White
Telephone Wall Plates — Mid-Size (3-1/8 in. x 4-7/8 in.)
Description
RJ-11, 2 Pair
Combo CATV/RJ11
CATV Coax
Color
White
White
White
Qty.
Box of 100
Box of 100
Box of 100
85-205
85-220
85-239
85-237
85-218
85-232
Cat. No.
86-237
86-236
86-234
LISTED
Cables
Q Customizable bulk cable
Q Bulk CAT 5e solid 4-pair, CMR rated, 24 AWG, 350 MHz cable
Q Bulk 2-conductor in-wall, 16 AWG speaker wire
Wall Plates/Cables
Description
Cat. No.
CAT 5e Cable - 100 ft.
85-780
In-wall Speaker Wire - 50 ft.
85-770
85-770
85-780
G-22
www.idealindustries.com
1-800-435-0705 for Customer Service
Section G - DataComm
10/22/08
8:33 AM
Page 23
DataComm Equipment
Insulation Displacement
Connectors (IDC)
Modular Plugs
Description
Qty.
Cat. No.
UB-I, 2-Wire Tap Splice IDC
25
85-900
UR-I, 3-Wire Butt Splice IDC
25
85-925
UY-I, 2-Wire Butt Splice IDC
25
85-950
UR-I, 2-Wire Butt Splice IDC
100
86-925
UY-I, 2-Wire Butt Splice IDC
100
86-950
UB-I, 2-Wire Tap Splice IDC
1,000
87-900
UR-I, 3-Wire Butt Splice IDC
1,000
87-925
UY-I, 2-Wire Butt Splice IDC
1,000
IDC Combo Pack
Kinetic Super™ Wire Stripper/Crimper
85-344
85-346
n All plugs comply with FCC 86 guidelines and are UL Listed
n Plugs are capable of supporting the latest EIA/TIA cable system
performance categories when installed in compliance with
appropriate EIA/TIA standards and methods
n Plugs offered for round cable with solid conductors and
for flat cable and stranded conductors
n Position and contact configurations cover popular styles
Description
Qty.
Cat. No.
25
85-351
50
85-401
87-950
100
86-401
25
85-960
25
85-352
1
45-719
6-Position 4-Contact Flat Stranded
6-Position 6-Contact Flat Stranded
50
85-402
100
86-402
100
86-398
25
85-353
50
85-403
100
86-403
25
85-344
50
85-394
100
86-394
6-Position 6-Contact Round Solid
100
86-395
8-Position 8-Contact CAT 6 Modular Plug
25
85-366
25
85-346
50
85-396
100
86-396
4-Position 4-Contact Flat Stranded (Handset)
CAT 6 Modular Plugs
n Supports CAT 6
8-Position 8-Contact Flat Stranded
n Unique three-piece design provides
easy installation and optimal performance
n Crimps with a standard RJ-45 crimp die
6-Position 4-Contact Round Solid
n 50 micron gold contacts, 8-position, 8-contact
n Suitable for solid or stranded conductors
Description
CAT 6 Modular Plugs
Qty.
Cat. No.
25
85-366
8-Position 8-Contact Round Solid
Also available in these kits:
33-750
1-800-435-0705 for Customer Service
33-704
33-652
www.idealindustries.com
G-23
Connectors/Modular Plugs
IDC connectors create fast splice
and tap connections on solid copper
wires. Designed for low voltage
85-900
85-925
telecommunication cables.
n Moisture-resistant sealant protects
wires from corrosion
85-950
n Use with solid copper single-conductor
wire
n Kinetic Super™ Wire Stripper/Crimper
easily cuts and strips 22 to 24 AWG solid wire
Section G - DataComm
10/22/08
8:34 AM
Page 24
Economy Data and CATV Kit - 33-915
Kit Includes:
•
•
•
•
•
•
•
30-496 Telemaster™ Telephone Tool
30-633 Economy Compression Tool
35-492 Non-Impact Turn-Lock™ Tool w/110 Blade
35-535 Mechanics Bag
45-074 Data T®-Cutter
45-167 Economy UTP Stripper
45-320 Economy Coax Stripper
Basic Data and Video Kit - 33-916
Kit Includes:
•
•
•
•
•
•
•
•
30-793 OmniSeal™ Pro XL Compression Tool
33-856 VDV Multimedia Cable Tester
35-462 Journeyman Electrician’s Tote™
35-485 Punchmaster™ II Punch Down Tool w/110 Blade
45-074 Data T®-Cutter
45-165 UTP Stripper
45-262 Stripmaster® Wire Stripper for RG-6
62-140 TRACETone™ Tone Generator & Amplifier Probe
Data/Video Kit - 33-917
Kit Includes:
Kits
•
•
•
•
•
•
•
•
•
•
•
•
•
•
30-522 Crimpmaster™ Crimp Tool for RJ-45 Modular Plugs
30-793 OmniSeal™ Pro XL Compression Tool
33-856 VDV MultiMedia Cable Tester
35-046 Coax Connector Tool - F & BNC
35-088 Electrician’s Scissors w/Stripping Notch
35-407 110/66 Blade Combo Punch Down Blade
35-410 Large Mouth Bag — 13 in.
35-473 Probe Pic and Spudger
35-485 Punchmaster™ II Punch Down Tool w/110 Blade
35-908 Twist-a-Nut™ 7-in-1 Screwdriver
45-074 Data T®-Cutter
45-165 UTP Stripper
45-526 Coax Stripper w/Replaceable Cartridge
62-164 Amplifier Probe
Economy CATV Compression Kit - 33-621
Kit Includes:
•
•
•
•
•
30-633 Economy Compression Tool
35-402 Zipper Pouch
45-074 Data T®-Cutter
45-320 Economy Coax Stripper
92-654 RG-6, RG-6 Quad Compression F-Connectors, qty. 4
G-24
www.idealindustries.com
1-800-435-0705 for Customer Service
DataComm Equipment
Residential Compression Kit - 33-625
Kit Includes:
•
•
•
•
•
•
30-603 OmniSeal™ Pro Compression Tool
35-535 Mechanic’s Tool Bag
45-074 Data T®-Cutter
45-262 Coax Stripmaster® Wire Stripper for RG-6
92-650 RG-6 RTQ Compression Connector, 50/jar
LA-3953 Stripmaster® RG-6 QuadShield Repl. Blade
Economy Compression Kit - 33-620
Kit Includes:
•
•
•
•
•
30-633 Economy Tool
45-074 Data T®-Cutter
45-526 Coax Stripper
92-610 RG-59 RTQ Compression Connectors, 50/jar
92-650 RG-6 RTQ Compression Connector, 50/jar
Service Compression Kit - 33-630
Kit Includes:
30-793 OmniSeal™ Pro XL Compression Tool
45-074 Data T®-Cutter
45-262 Coax Stripmaster® Wire Stripper for RG-6
89-026 Compression F-Connector Port Seals, qty. 5
89-057 BNC RG-6 Compression Connectors, qty. 10
89-058 BNC RG-59 Compression Connectors, qty. 10
92-650 RG-6 RTQ Compression Connector, 50/jar
92-660 RG-6 Plenum Compression Connector, 50/jar
LA-3953 Replacement Blade for 45-262
Kits
•
•
•
•
•
•
•
•
•
RJ-45/11 Four, Six and Eight-Position
Combination TelCom Termination Kit - 33-704
Kit Includes:
•
•
•
•
30-496 Telemaster™ for RJ-11/RJ-45 Plugs
85-351 4-Position, RJ-11 Stranded Modular Plugs, qty. 15
85-352 6-Position, RJ-11 Stranded Modular Plugs, qty. 15
85-353 8-Position, RJ-45 Stranded Modular Plugs, qty. 15
1-800-435-0705 for Customer Service
www.idealindustries.com
G-25
Section G - DataComm
10/22/08
8:34 AM
Page 26
Economy 10Base-T Kit - 33-750
Kit Includes:
• 30-496 Telemaster™ RJ-11/RJ-45 Crimp Tool
• 45-165 UTP/Coax Stripper
• 85-346 8-Position RJ-45 Non-keyed Solid Plugs, qty. 50
Crimpmaster™ 10Base-T RJ-45
Crimping Kit - 33-652
Kit Includes:
30-506 Crimpmaster™ Crimp Tool Frame only
30-559 8-Position Die Set for RJ-45 Plugs
45-074 Data T®-Cutter
45-165 UTP/Coax Stripper
86-396 8-Position RJ-45 Non-Keyed Solid Plugs, qty. 200
•
•
•
•
•
RG-6 Push-on Connector Kit - 33-320
Kit Includes:
• 45-320 2-Step 59 & 6 Series Stripper
• 85-065 RG-6 Push-On Connectors, qty. 4
Kits
Compression Connector Installation Kit - 33-623
Kit Includes:
•
•
•
•
45-074 Data T®-Cutter
45-320 Coax Cable Stripper
45-633 Economy Compression Tool
Pouch w/belt clip
G-26
www.idealindustries.com
1-800-435-0705 for Customer Service
Section G - DataComm
10/22/08
8:35 AM
Page 27
DataComm Equipment
Cable Service Kit - 33-605
Kit Includes:
•
•
•
•
•
•
•
•
•
35-088 Electrician’s Scissors w/Stripping Notches
35-462 Journeyman’s Electrician’s Tote™
35-473 Probe Pic & Spudger
35-485 Punchmaster™ Punch Down Tool w/110 Blade
35-497 66 Blade Only
35-905 5-in-1 Screwdriver
45-165 UTP/STP Stripper
62-160 Tone Generator
62-164 Amplifier Probe
Deluxe Cable Service Kit - 33-705
Kit Includes:
•
•
•
•
•
•
•
•
•
•
•
30-496 Telemaster™ Telephone Tool
35-088 Electrician’s Scissors w/Stripping Notches
35-462 Journeyman’s Electrician’s Tote™
35-473 Probe Pic & Spudger
35-485 Punchmaster™ Punch Down Tool w/110 Blade
35-497 66 Blade Only
35-905 5-in-1 Screwdriver
45-165 UTP/STP Stripper
62-160 Tone Generator
62-164 Amplifier Probe
62-200 LinkMaster™ Tester and Remote
Technician’s Service Kit - 33-505
Kit Includes:
35-088 Electrician’s Scissors w/Stripping Notches
35-473 Probe Pic & Spudger
35-485 Punchmaster™ Punch Down Tool w/110 Blade
35-497 66 Blade Only
35-908 7-in-1 Twist-a-Nut™ Screwdriver/Nutdriver
45-165 UTP/STP Stripper
62-205 Nylon case
Kits
•
•
•
•
•
•
•
Crimpmaster™ F-Type (CATV)
Connectors Kit - 33-400
Kit Includes:
• 30-503 Crimpmaster™ CATV Crimp Tool
• 85-016 F-Connector, Crimp-on RG-59 Plugs, qty. 20
• 85-017 F-Connector, Crimp-on RG-6 Plugs, qty. 20
1-800-435-0705 for Customer Service
www.idealindustries.com
G-27
Section G - DataComm
10/22/08
8:35 AM
Page 28
Pro Installer Kit - 33-945
Kit Includes:
•
•
•
•
•
•
•
•
•
•
•
•
30-427 Large Mouth Bag – 18 in.
30-603 OmniSeal™ Compression Tool
30-696 Ratchet Telemaster™
35-046 F-Connector Tool
35-087 Lever™-Snips Electrician’s Scissors
35-091 Cable Splicing Knife
35-205 Torpedo Level
35-238 Mag-Tape™ Tape Measure
35-275 Jab Saw
35-407 110/66 Blade
35-420 Tongue & Groove Pliers – 9-1/2 in.
35-473 Probe Pic and Spudger
• 35-485 Punchmaster™ II 110 Blade only
• 35-497 66 Blade only
• 35-908 7-in-1 Twist-a-Nut™
Screwdriver/Nutdriver
• 35-3037 Smart-Grip™ Long-Nose Pliers –
7-3/4 in.
• 35-3430 Smart-Grip™ Tongue & Groove
Pliers – 10 in.
• 45-074 Data T®-Cutter
• 45-165 UTP/STP Stripper
• 45-526 Coax Stripper - 2-Step
• 62-160 Tone Generator
• 62-164 Amplifier Probe
Coax Termination Hip Kit - 33-624
Kit Includes:
•
•
•
•
30-793 OmniSeal™ Pro XL Compression Tool
45-074 Data T®-Cutter
45-603 Coax/UTP Cable Stripper
92-651 Compression F-Connector, RG-6,10/card
RCA Compression Connector Kit - 33-635
Kit Includes:
Kits
•
•
•
•
•
•
30-793 OmniSeal™ Pro XL Compression Tool
45-074 Data T®-Cutter
45-603 Coax/UTP Cable Stripper
89-044 OmniCONN™ RG-6 Compression Connectors
89-572 OmniCONN™ RCA RG-59 Compression Connectors
89-582 OmniCONN™ RCA RG-6 Compression Connectors
N EW
Telemaster™ Crimp Kit - 33-700
Kit Includes:
•
•
•
•
N EW
30-496 Telemaster Tool for RJ-11 (1, 2, 3 pair) and RJ-45 Plugs
85-346 RJ-45 8P8C, qty. 10
86-395 RJ-11 6P6C, qty. 10
85-344 RJ-11 6P4C, qty. 10
G-28
www.idealindustries.com
1-800-435-0705 for Customer Service
Section G - DataComm
10/22/08
8:36 AM
Page 29
DataComm Equipment
Coaxial Selection Chart
Compression Style
Cable
Cutter
Stripper
Compression Tool
Compression Connector
RG-59
Reg/Tri/Quad
45-074, 45-075
45-265, 45-603, 45-526
30-603, 30-793, 30-633
92-610, 92-619
RG-6
Reg/Tri/Quad
45-074, 45-075
45-262, 45-603, 45-526
30-603, 30-793, 30-633
92-654, 92-651, 92-650,
92-656, 92-659
RG-6 Plenum
45-074, 45-075
45-282, 45-603, 45-526
30-603, 30-793, 30-633
92-660, 92-669
RG-11
45-074, 45-075
45-111, 45-510
30-603, 30-793
89-211, 89-1211
Minis
45-074, 45-075
45-529, 45-163
30-603, 30-793
89-014SM, 89-014SMRCA
Tester
CATV/SATV/F-type
33-856, 33-880
33-881, 33-887*
BNC
RG-59
45-074, 45-075
45-265, 45-603, 45-526
30-793
89-047, 89-5047
RG-6
45-074, 45-075
45-265, 45-603, 45-526
30-793
89-048, 89-5048
Cutter
Stripper
Crimping Tool
Connector
RG-59
45-074, 45-075
45-265, 45-603, 45-320
30-503
85-036, 85-016, 86-016
RG-6
45-074, 45-075
45-262, 45-603, 45-320
30-503
85-037, 85-017, 86-017
RG-6 Quad Shield
45-074, 45-075
45-282, 45-603, 45-320
30-503
85-057, 85-030, 86-030
*Need LA-4173 adapter.
Cable
Tester
CATV/SATV/F-Type
RG-6 Plenum
45-074, 45-075
45-282, 45-603
30-503
N/A
RG-11
45-074, 45-075
45-164, 45-510, 45-111
30-482
N/A
RG-59, Non-Plenum
45-074, 45-075
45-520
30-502, 30-483
85-513, 85-517, 85-502
RG-6 Non-Plenum
45-074, 45-075
45-520
30-483
85-545
33-856, 33-880
33-881, 33-887*
BNC
*Need LA-4173 adapter.
1-800-435-0705 for Customer Service
www.idealindustries.com
G-29
Coaxial Selection Chart
Crimp Style
Section G - DataComm
10/22/08
8:36 AM
Page 30
FiberMASTER™ Fiber Optic Test Kit
Measure fiber optic power in milliwatts (mW) and decibel-milliwatts
(dBm) to test and troubleshoot active LANs. Quickly measure cabling
loss with the automatic calibration feature that stores reference power
from any light source for quick dB loss calculations. Plus, the 1490nm
wavelength measurement mode is perfect for troubleshooting
emerging Fiber-To-The-Home cabling systems.
n Fiber Optic Power Meter & Light Source — Four wavelength
power meter for multimode and single mode testing, and 850nm
multimode LED light source.
n Calibration Function — Stores reference power level for quick
dB loss measurements eliminating the need to manually calculate
loss.
n Save Time and Money — Power meter features 2.5mm
universal and FC adapters, light source includes ST®, SC and FC
adapters to test the most common interfaces.
n Ready for FTTx — 1490nm measurement wavelength for use
with nearly all single mode Fiber-To-The-Home applications.
n Designed for the Field — Unique “docking” light source and
easy three-button operation make this the perfect fiber tester for
use in the field.
FiberMASTER Kit Includes:
• 33-926 Light source, 850nm LED with ST®, SC and FC adapters
• 33-927 Power meter, 4 wavelength with universal 2.5mm and
fixed FC adapter
• 2x FC-SC 62.5um multimode cables
• 1 SC calbration coupler
• Carrying case
• English, Spanish, German, French, Portuguese, Italian and Chinese
user’s manual
Fiber Optic Tester
Power Meter Specifications
Wavelength
850, 1300/1310, 1490, 1550nm
Detector
InGaAs
Measurement Range
-60 to +3dBm
Accuracy
±5%
Display Resolution
.01
Connector
Universal 2.5mm w/FC adapter
AAA Alkaline Battery x 3
Power Supply
Operating Time
360 hours
Operating Temp
-10 to +60°C
-25 to +70°C
Storage Temp
Light Source Specifications
Wavelength
Output Power
Stability
Connector
Power Supply
Operating Time
Operating Temp
Storage Temp
850nm LED
-6 to -7 dBm Typical
.05dB after 15min, 0.1dB over 8 hrs
2.5mm w/ST®, SC, FC adapters
AAA Alkaline Battery x 3
40 hours
-10 to +60°C
-25 to +70°C
Description
Cat. No.
Kit with integrated remote and accessories
33-928
Note: ST® is a registered trademark of AT&T.
G-30
www.idealindustries.com
1-800-435-0705 for Customer Service
Section G - DataComm
10/22/08
8:37 AM
Page 31
DataComm Equipment
Fiber Inspection Microscope
Serrated Cutter (For Kevlar®)
with Breaker Notch
n Two-Step process significantly
increases the life of this rugged tool
n Superior quality high-carbon stainless steel with molybdenum and
n 100X magnification for viewing multimode connectors
n Includes 2.5mm connector “Universal Adapter” for FC, ST
®
and SC style connectors
n Oblique illumination provides excellent view of ferrule cleanliness
and core condition
n Rugged, rubberized metal housing, precision glass optics and a
built-in laser safety filter
n White LED illumination delivers 100,000 hours bulb life
vanadium provides the super-hard edges needed to stand up to
the demands of today’s market
n Textured cushioned-grip handles
n Value-priced for contractors, cable assembly houses, fiber
installers/technicians and tool kits
Description
Cat. No.
Serrated Cutter w/Breaker Notch (Patent pending)
45-344
Note: Kevlar® is a registered trademark of DuPont.
n Soft padded carrying case included
n Battery life 48+ hours
DualScribe™ Double-Ended
Fiber Optic Scribes
n Optional 200X Conversion Eyepiece threads on for viewing finish/
polish of singlemode connectorsD
Description
Cat. No.
Fiber Inspection Microscope
45-332
1.25mm Connector Adapter
45-334
MTRJ-Style Connector Adapter
45-335
200X Conversion Eyepiece for Singlemode Connectors
45-336
n Three professional quality blade styles
to choose from to meet your specific
needs – Ruby, Sapphire, Carbide
n Color-coded handles for quick,
easy identification
Red – Ruby
Blue – Sapphire
Black – Carbide
n 30° single bevel – DualScribe™
reversible blade doubles tool life
Note: ST® is a registered trademark of AT&T.
45-358
45-359
n Soft non-slip grip provides precise
45-357
control during scribing
n Clear safety cap protects the blades from
VFF Visual Fault Finder
damage when not in use
Laser light source used to locate breaks, faulty
splices and crimps
Handle Color
Cat. No.
Red
45-357
Sapphire Blade Fiber Optic Scribe
Blue
45-358
Carbide Blade Fiber Optic Scribe
Black
45-359
Description
n NEW 2.5mm Universal Adapter for all
Ruby Blade Fiber Optic Scribe
ST®, SC and FC connectors
n Useful over a distance of 5km (3 miles)
n Two AA batteries provide over 30 hours
of continuous use
n Slim, pocket-sized tool in rugged
metal housing
MiniLite-Strip™
Optical Fiber Stripper
loop included
n Small strip notch
n Nylon carrying case with belt
Description
Visual Fault Finder
Note: ST is a registered trademark of AT&T.
®
Cat. No.
VFF5
engineered and
precision-ground to
strip 900 micron or
250 micron buffer coatings
from 125 micron fiber
n Larger round strip notch machined to remove the 3mm outer jacket
n Strip notches pre-set and locked, no field adjustment necessary
1-800-435-0705 for Customer Service
Description
Cat. No.
MiniLite-Strip™ Optical Fiber Stripper
45-352
www.idealindustries.com
G-31
Fiber Optic Tools
n Compact size 7.5 in. x 1.96 in. x 1.18 in.
Section G - DataComm
10/22/08
8:37 AM
Page 32
Plastic Polishing
Fixture
Lite-Strip™
Optical Fiber Stripper
n Universal fitting accepts all ST®, SC
V-notch blades strip a wide range of
outer cable jacket. Precision-ground,
replaceable knife-type blades strip
tight buffer tube insulations
(900µm). Also strips
mechanically strippable
coatings from 250
microns to 900
microns.
and FC connectors with 2.5mm
ferrules
n Economically priced
n Grooved face for polishing efficiency
n Precision tool used by manufacturers, contractors and in tool kits
n Replaceable precision-ground blades cleanly strip buffer
coatings
n New funneled hole makes cable insertion easier
after every application
n One-step, 900 micron stripping hole provides broader
stripping range
n Extra durable to withstand normal drops without requiring
tool realignment
n New gauge color makes fiber and hole identification easier
n Improved comfort-grip handles for an easier, more comfortable
stripping process
Lite-Strip™ Optical Fiber Stripper (900µm/250µm)
Cat. No.
Plastic Polishing Fixture
45-342
Note: ST® is a registered trademark of AT&T.
n Improved spring mounting returns handles to original position
Description
Description
Fiber Sizes
Cat. No.
125µm, 140µm
45-350
Stainless Steel Polishing Fixture for
Optical Fiber ST® and
SC Type Connectors
Produces polished fiber optic ST® and
SC type connectors for optimum
connector performance.
n Precision-machined, stainless-steel
disk provides accurate polishing angle
for desired end face finish
n Stainless-steel hardness maintains long life and resists
uneven wear
n Stepped surface reduces drag and friction for easier polishing
Description
Stripmaster® Ribbon Fiber
Jacket Stripper
Polishing Fixture for Optical Fiber
SC/ST® Type Connectors
n Removes jacket from Ribbon Fiber without
Qty.
Cat. No.
1
45-341
Note: ST is a registered trademark of AT&T.
®
Fiber Optic Tools
damage to the Kevlar® strength member of
the Ribbon Fiber
Polishing Films for Fiber
Optic Connectors
Note: Frame and blade-set sold separately.
n For optimum connector
Description
Cat. No.
Stripmaster® Wire Stripper Frame only
L-5620
Blade-set for use with Corning Plenum and Riser Ribbon Fiber Cable
LB-1152
Blade-set for use with Corning “Fanout” Ribbon Cable
LB-1153
Note: Kevlar® is a registered trademark of DuPont.
45-338
45-337
45-339
polishing results, we
recommend a three-step
procedure using 0.5µm,
3µm and 12µm 3 in. x 6 in.
aluminum oxide polishing
films
n Lot-to-lot consistency in our
films means repeatable connector
finishes on ceramic, stainless steel,
plastic and composite ferrules
n A single sheet will typically yield 10 to 20 connectors when using
Split-Tip Fiber Optic Swabs
the recommended 3-step procedure
n Split-tip design cleans fiber easier
Description
and more efficiently than other
methods
n Tube/handle is pre-loaded
with 99% isopropyl alcohol
n A single swab can be used
Color
Qty.
Cat. No.
0.5µm, 3” x 6”, Aluminum Oxide
Ivory
20 films/sleeve
45-337
3.0µm, 3” x 6”, Aluminum Oxide
Lt. Yellow
20 films/sleeve
45-338
12µm, 3” x 6”, Aluminum Oxide
Lt. Red
20 films/sleeve
45-339
for many cleanings or until the
alcohol is gone
Description
Split-Tip Fiber Optic Swabs
G-32
www.idealindustries.com
Qty.
Cat. No.
Bag of 20
45-360
1-800-435-0705 for Customer Service