Aastra Telecom 6753i RP Telephone User Manual

User Guide
Aastra 7106a - analogue telephone
EN/LZT 102 4161 R1B
© Aastra Telecom Sweden AB 2011, all rights reserved.
Aastra 7106a Analogue Telephone
2
Table of Contents
Introduction
Important User information
Telephone Parts
Telephone Layout
Cable inlets and MW switch
Incoming calls
Outgoing calls
During calls
Call forwarding
Optional Call handling Features
Speed Dial Memory
Phone Setting
System Dependent Phone Setting
Telephone Specification
Wall mounting
Aastra 7106a Analogue Telephone
3
4
5
6
6
8
9
11
13
14
17
25
26
27
28
29
Introduction
Aastra 7106a is an easily managed line-powered analog phone.
The functions and features available with this telephone are
designed for easy use in all different telephone handling
situations. It supports calls with excellent voice quality.
Aastra 7106a Analogue Telephone
4
Important User information
Safety Instructions
Save these instructions
Read these safety instructions before use!
Note: When using your telephone or connected equipment, the following
basic safety precautions should always be followed to reduce risk of fire,
electrical shock and other personal injury.
•
Follow instructions in the equipment's user guide or other documentation.
•
Always install equipment in a location and environment for which it is designed.
•
Headsets used with this equipment must comply with EN/IEC 60950-1
•
Do not make any changes or modifications to equipment without seeking approval
from the party responsible for compliance. Unauthorized changes or modifications
could void the user's authority to operate the equipment.
•
•
Do not use the telephone to report a gas leak in the vicinity of the leak.
Do not spill liquid of any kind on the product or use the equipment near water, for
example, near a bathtub, washbowl, and kitchen sink, in a wet basement or near
a swimming pool.
•
Do not insert any object into equipment slots that is not part of the product or
auxiliary product.
•
Do not disassemble the product. Contact a qualified service agency when service
or repair work is required.
•
Do not use a telephone (other than cordless type) during an electrical storm.
Disposal of the product
Your product should not be placed in municipal waste. Please check local
regulations for disposal of electronic products.
Aastra 7106a Analogue Telephone
5
Telephone Parts
When you unpack your phone, you should ensure that you have all of the
following items. If any part is missing, contact the supplier of your phone.
Telephone Layout
Aastra 7106a Analogue Telephone
6
Table with Key-symbols
Symbols /
Keys
French
Spanish
German
Portuguese
Numérotation
abrégée
Touche M0-M3
Teclas
programables
M0-M3
Kurzwahl
M0-M3
Discagem rápida
M0-M3
Snel-kiezen
M0-M3
Flash key
Touche R –
Flash
Tecla Flash
R- Taste
Flash
Haakcontact
Redial /
Pause key
Touche Rappel /
Mise en attente
Rellamada/
Wahlwiederholung /
Pausentaste
Rediscagem/tecla
de pausa
0-9, * and #
(dial keys)
0-9, * and #
0-9, * and #
0-9, * and #
0-9, * and #
0-9, * and #
(touches de
(digitos)
(Zifferntasten)
(Dígitos)
(bel toetsen)
Volumen
Lautstärketasten
Volume
Volume toetsen
(Mute) silencio
Stummtaste
Mudo
Mute-toets
Opslaan
Speed-dial
M0-M3
Pausa
Dutch
Nummerherhaling
/ Pauzetoets
numérotation)
Volume keys
Touches de
réglage volume
Mute key
Touche secret Act./desactivMicro
Save key
Touche de
sauvegarde
Salvar
Speichertaste
Salvar
Message
waiting
Message en
attente
Mensaje en
espera
Nachricht wartet
Mensagem em
espera
Aastra 7106a Analogue Telephone
7
Wachtend
bericht
Cable inlets and MW switch
Symbols
French
Spanish
German
Portuguese
Dutch
Line socket
Prise ligne
téléphonique
Puerto
conneccion de
linea
Anschlussbuchse
Conector de
linha telefônica
Lijnpoort
OFF / Hi Volt
/ MW(-) /
MW(+)
ARRET / Haute
Tension / MW(-) /
MW(+)
DE / Alto voltaje /
MW(-) / MW(+)
AUS/Spannung/
OFF / Hi Volt /
MW(-) / MW(+)
UIT / Hi Volt /
Handset Jack
Prise pour
combiné
Puerto de
microtelefono
Hörerbuchse
Conector do
monofone
Telefoonhoorn
aansluiting
Aastra 7106a Analogue Telephone
8
MW(-) / MW(+
MW(-) / MW(+)
Incoming calls
To answer an incoming call
Lift the handset
Answer a second call
A call waiting tone will inform you, during conversation that a second call
is waiting. You have two options:
Option 1:
1.
Replace the handset. The new call will be signaled on your phone
2.
Lift the handset to receive the call.
Option 2:
1.
Ask the party you are speaking with to wait
and replace the handset. The waiting call will start
2.
Press
ringing.
3.
Lift the handset to receive the new call
4.
Press 2 to return to the first call (Sweden, press )
After finishing the call, replace the handset to receive the first call again
Answer a call from another extension
you can answer a call to another extension from any phone in your office:
1.
Lift the handset and call the ringing extension.
2.
You receive a busy tone, press numeric key, 8 (France: 4.
Sweden: 6)
Mute ring signal
Press
to mute the ring signal (LED flashing)
Do not disturb, DND
When you activate DND, calls to your extension is not shown.
Outgoing calls can be made as usual.
Activate DND:
Lift the handset and press numeric keys * 2 7 #, Replace the handset.
Deactivate DND:
Lift the handset and press numeric keys # 2 7 # Replace the handset.
10
Outgoing calls
Dial
Pick up the handset and Press numeric keys, If required the number keys
to dial out
can be combined with * # or
Last number Redial
1.
2.
Lift the handset
, to call the last number you have dialed.
Press
Last External Number Redial
Lift the handset and press numeric key * * *
1.
(Finland and Sweden: * * 0)
Speed-dial by Memory Keys (M0-M3)
1.
2.
Pick up the handset.
Press memory key (M0 to M3).
Call Back
If a called extension is busy or there is no answer:
At busy tone, Press numeric key 6, (Finland, France and Sweden: 5).
Replace the handset
Lift the handset when you are called back.
1.
2.
3.
If all external lines are busy (after dialing the digit or digits to get the line:
At busy tone, Press numeric key, 6 (Finland, France, and Sweden:
1.
5).
2.
3.
4.
Dial the external number and press #,
Replace the handset.
Lift the handset when you are called back.
11
Cancel call back
Cancel single call back: Lift the handset and press numeric keys # 3 7*, ext
number, #, Replace the handset.
Cancel all callbacks: Lift the handset and press numeric keys # 3 7 #
Replace the handset.
Protection (Data Privacy)
Protection allows you to make a call without any disturbances, e.g.
intrusion. The feature is automatically cancelled when the call is finished
Lift the handset and Press numeric keys * 41 #
Number presentation restriction
If you do not want your name and number to be displayed to the person
you are calling.
1.
Lift the handset and press numeric keys * 4 2 #
2.
Dial the number
Call duration timer for out going calls
A call duration timer for outgoing calls starts 5 seconds after “off hook” status is
established. The call duration is stored in the call list with the caller ID information.
12
During calls
Mute
1.
2.
When a call is in progress, press
to mute (LED flashing).
To speak to the caller, press
again (LED off).
Inquiry
1.
2.
3.
When a call is in progress, press
Call 3rd party and wait for an answer
Return to the first call by pressing, 2 (Sweden:
Refer back (Switch back)
Press, 2 to refer back to the other party (Sweden:
)
)
Transfer
1.
When a call is in progress, press
2.
Call 3rd party and wait for an answer. Replace the handset
before or after the answer
Conference
1.
When a call is in progress, press,
2.
Call 3rd party
3.
After answer, press numeric key 3
Repeat the procedure to add more conference members (max 7
members)
Hold / Park a call
1.
2.
When a call is in progress, Press
and replace the handset
Lift the handset to resume the call on your own extension
To resume the call from on another extension:
1.
Lift the handset
2.
Call the extension where the call was put on hold
3.
Press numeric key 8 (France: 4. Sweden:6)
13
Call forwarding
Diversion
If you do not want to be disturbed or will be out of office, you can have all calls to
your extension diverted to a preprogrammed answering position. Diversion can be
made direct, on no answer, on busy or to another information service facility.
As a reminder that your telephone is diverted, you will hear a special dial tone each
time you lift the handset to make a call.
Order direct diversion from your own extension
The call can be diverted to an individual position or up to three
determined common answering positions (depending on the type of the
incoming call) that are preprogrammed by your system administrator.
1.
2.
Lift the handset and Press numeric keys * 21 # (UK: *2# )
Replace the handset
Cancel diversion from your own extension:
1.
2.
Lift the handset and press numeric keys # 21 # ( UK: # 2 # ),
Replace the handset.
To order diversion when there is no answer
1.
Lift the handset and Press numeric keys * 211 # (Finland and
Norway: *61# )
2.
Replace the handset
Cancel diversion when there is no answer:
1.
2.
Lift the handset and press numeric keys # 211 # ( UK: #61# ),
Replace the handset.
Diversion when the caller receives a busy tone
1.
Lift the handset and Press numeric keys * 212 # (Finland and
Norway: *67# )
2.
Replace the handset.
Cancel diversion when the caller receives a busy tone:
1.
2.
Lift the handset and press numeric keys # 212 # ( UK: # 67 # ),
Replace the handset.
14
Internal Follow me
All calls to your extension are diverted to an extension of your choice, within the
private network. For example, when you are working in another room and want your
calls to follow you to that answering position.
When your telephone has Follow-me you can still make calls from it as usual.
As a reminder that your telephone has Follow-me, you will hear a special dial tone
each time you lift the handset to make a call.
Ordering Follow-me from your own phone
1.
2.
3.
Lift the handset (dial tone) and press numeric keys * 2 1 * (UK:*2* )
Dial extension number of the answering position and press #
(Special dial tone)
Replace the handset.
Canceling Follow-me from your own phone
1.
2.
Lift the handset (special dial tone) and press numeric keys # 21 #
(ordinary dial tone) (UK:#2# )
Replace the handset
Ordering Follow-me from another phone
You can order Follow-me of your own extension number from another
telephone.
The first step is to allow that Follow-me is permitted to be done from
another telephone. Do the following from your own telephone:
1.
Lift the handset (dial tone) and press numeric keys * 2 1 * ( UK:*2*
)
2.
3.
Dial own extension number and press #
Replace the handset
To order Follow me from another telephone:
1.
Lift the handset (dial tone) and press numeric keys * 2 1 * ( UK:*2*
2.
Dial own extension number * the extension number of the new
answering position # (special dial tone)
Replace the handset
)
3.
Canceling Follow-me from another phone
1.
Lift the handset (dial tone) and dial #21*
2.
Dial own extension number # (dial tone)
3.
Replace the handset
15
Ordering Follow-me remotely
With this feature you can order follow-me of any extension number from
any telephone. The prerequisite is that all the involved telephones have
the right service profile.
To order remote programming of follow-me, do the following:
1.
Lift the handset (dial tone) and press numeric keys * 2 1 * ( UK:*2*
2.
Extension number to divert * extension number of the new
answering position #
Wait for special dial tone
Replace the handset.
)
3.
4.
Canceling Follow-me remotely
To cancel remote programming of Follow-me from another telephone
than the telephone with diverted number:
1.
2.
3.
4.
Lift the handset and wait for the dial tone
Press numeric keys # 2 1 * ( UK:*2* )
Dial diverted extension number and press #
Replace the handset
External Follow me
1.
2.
Lift the handset and press numeric keys * 2 2 #
Dial external line code and external number press #, Replace the
handset
Cancel: Lift handset and press numeric keys # 2 2 #, Replace the
handset
General Cancelation
Cancel all activated features:
Lift the handset and Press numeric keys # 001 #
16
Optional Call handling Features
The features below may not be available in your telephony system. Please
contact your system administrator.
Free seating
1.
2.
Log on: Lift the handset and press numeric keys *11*
Dial Authorization code and press numeric key * Own extension
number, press #
Log off: Lift handset and press numeric keys #11#, Replace the
handset.
Personal Number
With the personal numbers and profiles feature you can be reached on
your normal office phone number even if you are out of the office. A
search profile (1-5) can be designed to fit the situation (in the office,
traveling, at home, and so on). Both internal and external phone numbers
can be used in a profile. Your search profile is programmed or modified by
system administrator.
When the feature is activated, incoming calls are transferred to selected phones or
back-up services in the order that you choose.
If an answering position in the profile is busy, the call can be
transferred to another predefined position in the profile (Voice Mail or a colleague).
You can handle the profiles from your own office phone. How to do
this is described in this section (an operator can also assist you).
You can also use any of the Personal Assistant applications if available.
Contact your system administrator for more information.
When out of the office, the feature Direct Inward System Access
(DISA) can be used, if available in your system.
How to use DISA is described in this section.
Activate or change profile from own extension
1.
2.
Lift handset and press numeric keys *1 0 * ( 1- 5 ) #
Replace the handset
Canceling a profile from your phone
1.
Lift handset and press numeric keys #10 #
2.
Replace the handset
17
Voice Mail
Enter your mailbox:
1.
Lift handset and dial the voice mail number and follow recorded
instruction.
Note: if the number to the voice mail system has been programmed on the
message waiting key you can also press that key to enter the mailbox
18
Call Waiting
If you urgently wish to contact a busy extension or external line, you can
notify the extension by a call waiting signal:
1.
2.
At busy tone, press numeric keys, 5 (Finland, France: 6 Sweden: 4)
Wait on line
Account Code
This feature is used to charge a call to an account number or to prevent
unauthorized calls from your phone. The account code can have 1-15
digits.
1.
2.
Lift handset and press numeric keys * 6 1 * account code #
Dial the digit or digits to get an external line or external line
Absence Information
The absent information is used to inform the caller why you are absent
and when you will return. Contact your system administrator regarding
the available absence codes.
With return date and time
1.
Lift the handset and press numeric keys * 2 3 *
2.
Enter absence code (0-9) and press numeric key *
3.
Enter the date or time (MMDD) or time (HHMM), press #
Cancel: Lift handset and press numeric keys # 2 3 #, Replace the handset
Without return date and time
1.
Lift the handset and press numeric keys * 2 3 *
2.
Enter absence code (0-9) and press numeric key #
Cancel: Lift handset and press numeric keys # 2 3 #, Replace the handset
19
Order for another extension:
1.
Lift the handset and press numeric keys * 2 3 0 *
2.
Dial the extension number and press *
3.
Enter the absence code (0-9), press *
Enter date or time (MMDD) or time (HHMM), for the other persons return,
Press #. Replace the handset.
Cancel: Lift handset and press numeric keys #230* Dial extension number
and press #. Replace the handset.
Parallel Ringing
This feature makes it possible for an incoming call to ring on several
phones simultaneously and for the call to be answered on any of the
phones. The feature requires all the phones involved to be defined in a
parallel ringing list.
To disable the parallel ringing temporarily:
1.
Lift the handset and press numeric keys * 2 1 *
2.
Dial extension number and press, #. Replace the handset
To restore Parallel Ringing:
Lift the handset and press numeric keys # 21 #, Replace the handset.
Intrusion on a busy extension
You can intrude on an ongoing call on a busy extension:
Lift the handset and Press numeric key 4, (France and Sweden: 8)
Before the intrusion a warning tone is sent to the parties in the ongoing call.
Group features
Group Call – pick - up
In a call-pick-up group, any member can answer any individual call to
group member.
Lift the handset and Press numeric key 8 to answer the call (Finland and
Sweden: 0)
20
Common bell group
Calls are signaled on a common bell.
Lift the handset and Press numeric key, 8, to answer the call (Finland and
Sweden: 0)
Group hunting
As a member of a group of extensions that is called by a common
number, you can temporarily leave the group.
1.
2.
Lift the handset and Press numeric keys * 2 1 * ( U.K: *2*)
Dial your own extension number and press #. Replace the
handset
To re-enter the group:
Lift the handset and press numeric keys # 21 #. Replace the handset
(UK: #2#).
If you are authorized, you can divert all calls to a group, to another
extension or another group:
1.
2.
3.
Lift the handset and press numeric keys * 2 4 *
Dial number of the group to be diverted, Press numeric key *
Dial extension number to the new answering position, press #
Replace the handset
To cancel the diversion:
1.
Lift the handset and press numeric keys # 2 4 *
2.
Dial the number of the group that has been diverted
3.
Press numeric key #, Replace the handset.
21
Direct inward system Access - DISA
If you are assigned to use this feature and you are working externally,
you can call your office and get access to an external line in order to
make business calls.
With common authorization code:
1.
2.
3.
4.
Lift the handset and call the DISA feature in your office.
You receive dial tone, press numeric keys * 7 2 *
Dial the authorization code and press numeric key #
You receive a dial tone, Dial external number
With individual Authorization code:
1.
2.
3.
4.
5.
6.
Lift the handset and call the DISA feature in your office.
You receive dial tone, press numeric keys: * 7 5 *
Dial the authorization code and press numeric key *
You receive a dial tone, Dial external number, press *
Dial your own extension number and press #
You receive a dial tone. Dial external number
22
Authorization code, Common
If you are authorized to use a common authorization code (1 to 7 digits)
you can temporarily change any phone used within the telephone system
to the authority level connected to this code.
For a single call:
1.
Lift the handset and press numeric keys * 7 2 *
2.
Enter authorization code and press #
3.
You receive a verification tone, Dial the digit or digits to get an
external line and the external number.
To open an extension for several calls:
1.
Lift the handset and press numeric keys # 7 3 *
2.
Enter authorization code and press #
3.
You receive a verification tone.
To lock an extension:
1.
Lift the handset and press numeric keys * 73*
2.
Enter authorization code and press #
3.
You receive a verification tone.
Authorization code, individual
If you are authorized to use an individual authorization code (1-7 digits,
affiliated to your own extension) you can lock your own extension to a
common authority level, e.g. when out of the office. You can also
temporarily change any other phone used within the telephone system to
the same authority level as you have on your own phone. The individual
code can be changed from your own extension.
To lock the phone:
1.
Lift the handset and press numeric keys * 76 *
2.
Enter authorization code and press #
3.
You receive a verification tone.
To make calls with your authority level when your phone is locked:
1.
Lift the handset and press numeric keys *75 *
2.
Enter authorization code and press #
3.
Dial the digit or digits to get an external line and the external number.
To open your phone:
1.
Lift the handset and press numeric keys # 76 *
2.
Enter authorization code and press #
3.
You receive a verification tone.
23
To assign your own authority level to another phone:
1.
Lift the handset and press numeric key * 75 *
2.
Enter authorization code and press *
3.
You receive verification tone
4.
Enter your own extension number and press #
5.
You receive verification tone, Dial the digit or digits to get an
external line and the external number.
To change your individual authorization code:
1.
2.
3.
4.
Lift the handset and press numeric keys * 74 *
Enter old authorization code and press *
Enter new authorization code and press #
You receive verification tone.
24
Speed Dial Memory
There are 4 memory keys (M0-M3) for storing frequently used numbers.
The number card is intended for noting the name.
Save telephone number
1.
Place the handset on the phone
2.
Press one memory key (M0 to M3)
3.
Press
and enter the number to be saved
4.
Press
key again to complete saving
Note: For some rare conditions it may be useful to insert a pause between
e.g. the area code and the phone number. To do this; enter the area code,
press the pause key and then continue with the telephone number.
Dial from a Memory
1.
Pick up the handset
2.
Press the memory key (M0 to M3) to be dialed
Delete/ Change a saved number
There is no special delete or change procedure. Instead the “save
procedure” is used.
1.
To delete a number
Follow the Save procedure starting with step 1 but do not enter a
new number in the 3rd step. In this way you “save no number”
which will clear the memory in step 4.
2.
To change a stored number
Follow the Save procedure and enter a new number in step 3 and
finish the save procedure in step 4. In this way the previous
number will be replaced.
25
Phone Setting
Set Ring Volume
Three levels of ring volume is provided: High, Low, Silence
1.
2.
3.
Place the handset on the phone
Press ‘Volume + to increase ring volume
Press ´Volume – to decrease ring volume.
To disable the ring signal for incoming calls press the ‘Volume –‘until
reaching Silence level or press
during on-hook. The Mute LED will
remain ON during on-hook to indicate the ring is now in silence.
Set Handset Volume
Four levels of handsfree volume is provided: Level 1 to 4
1.
Pick up the handset
2.
Press ‘Volume +’ to increase the handset volume
3.
Press ‘Volume –‘ to decrease the handset volume
Set Ring Melody
1.
During On-hook, press
and keys # 0 2 # (X) #.
X could be set from 1 to 8 (melodies 1~8).
26
System Dependent Phone Setting
Message Waiting Memory (MWM)
There is a message waiting memory in the telephone where the number to
the voicemail box shall be stored.
Save MWM
1.
2.
3.
Place the handset on the phone and press
Press
and enter the number to be saved
Press
key again to complete saving
Dial from a MWM
1.
2.
Pick up the handset or press ‘Speaker/Handset’
Press the
Message Waiting LED
When there is a message, the message waiting LED will be lighted ON or
flashing in blue.
The Message Waiting switch (at the back of the phone) is used to select
the appropriate MW mode (HV / + / -). Please check which MW type the
PBX system supports. Select “OFF” on the MW switch to deactivate the
message waiting function.
If the LED is steady active, change the message waiting switch position.
Set Flash time
Some systems require a different flash time for the flash key. To change
the flash time, proceed as follows:
1.
Press
#01#X#
where X is the flash time value between 1 and 9. See table below
Parameters
Programming key sequence
Set flash
time
[save]+[#]+[0]+ [1]+[#]+[X]+[#]
27
Lock
Protected
Yes
Valid
Settings
1: 100ms
2: 200ms
3: 300ms
4: 400ms
6: 600ms
9: 900ms
Default
100ms
Telephone Specification
Main Characteristics
Professional Telephone
Signaling
Market Certification
Single line
Analog (DTMF)
Europe (CE)
Body Color
Dark Grey
Features
DTMF dialing
Number memory
Yes
Stores 4 telephone numbers
Last number Redial
Flash function (R)
Programmable flash time
Hearing aid compatible
Volume control
Microphone mute
Yes
100 ms (default)
100 ms, 200 ms, 300 ms, 400 ms, 600 ms, 900 ms
Yes
Handset (4 levels)
Yes
Message waiting (MW)
Ringer melody
Ringer volume
Ringer silence
4 alternatives supported: MW+/MW-/HV/Off
8 types
2 levels
Yes
Hardware
Speed dialing keys
Memory Card
Redial/Pause
Flash key (R)
Mute key with LED
MW with LED indicator
4
1
1
1
1
1
Save
Volume control
Handset receiver
Microphone
Tone ringer
1
2
Electro-dynamic
Electret
Piezo type
Wall Hanging
Yes
Accessories
Connection cable, RJ11/ RJ45
1 pcs, 2 meters (not included)
1 pcs (not included)
Number card
28
Wall mounting
29
Copyright ©
Copyright Aastra Telecom Sweden AB, 2011. All rights reserved.
________________________________________________________________________________
Trademark
Aastra is a registered trademark of Aastra Technologies Limited. All other trademarks
mentioned herein are the property of their respective
________________________________________________________________________________
Disclaimer
Aastra Technologies Limited will not accept liability for any damages
and/or long distance charges, which result from unauthorized
and/or unlawful use. While every effort has been made to ensure
accuracy, Aastra Technologies Limited will not be liable for technical or
editorial errors or omissions contained within this documentation.
The information contained in this documentation is subject to
change without notice.
________________________________________________________________
Declaration of conformity
Hereby, Aastra Telecom Sweden AB, Box 42214, SE-126 17 Stockholm, declares that this
telephone is in conformity with the essential requirements and other relevant provisions of the
European Directive 1999/5/EC (R&TTE Directive).
Details to be found at: http://www.aastra.com.
30
Download PDF

advertising