Specifications | AB Soft LCDVD151A TV DVD Combo User Manual

1
Caution
2
Safety Information
3
3
4
4
5
6
8
8
10
11
11
13
14
16
17
Unit an d Accessory
Product Feature
Getting Started
Front View
Rea r V iew
Remote Control Key Functions
Menu Operation
Basic operation
Picture menu options
Audio menu options
Setup menu options
Feature menu options
Parental menu options
Feature menu options in VGA
Feature menu options in Component
18
18
19
Playing the DVD Player
21
22
23
Disc Care
Simpl e Troubleshooting
Techincal Specifications
Basic Control Function
OSD Menu In DVD Mode
caution
Caution
The lightening flash with arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of un-insulated "dangerous voltage"
within the products enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to the persons.
The exclamation point within an equilateral triangle is intend to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Cor rect disposal of this Product
W aste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life,
should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste
collection/recycling centre.
In the European Union there are separate collection systems for used electrical
and electronic products. Please help us to conserve the environment we live in!
1
Safety Information
To ensure reliable and safe operation of this equipment, please read carefully all the
instructions in this user guide, especially the safety information below.
Electrical safety
The TV set should only be connected to a mains supply which matches that stated on
the label.
To prevent overload, don't share the same mains supply socket with too many other
items of equipment.
Do not place any connecting wires where: they may be stepped on or tripped over.
Do not place heavy items on them, which may damage the leads.
Hold the main plug, not the wires, when removing from a socket.
During a thunderstorm or while leaving the TV for long periods, set the switch o ff.
Do not allow water or moisture to enter the TV or mains adaptor. Do NOT use in wet or
moist areas, such as Bathrooms, steamy kitchens or near swimming pools.
Pull the plug out immediatel y, and seek professional help if: the mains plug or cable is
damaged, liquid is spilt onto the set, or if it is accidentally exposed to water or moisture,
anything accidentally penetrates the ventilation slots, the set doesn't work normally.
Do not remove the safety covers. There are no user serviceable parts inside.You may
invalidate the warrant y. This apparatus must only be serviced by qualified personnel.
To avoid battery leakage, remove exhausted batteries from the remote control, or when
not using far a long period.
Do not break open or throw exhausted batteries on a fire.
Physical sa f ety
Do not block ventilation slots in the hack cover. You may place the TV in a cabinet, but
ensure at least 5cm (2") clearance all around.
Do not tap or shake the TV screen, or you may damage the internal circuits.Take good
care of the remote control.
To clean the TV use a soft dry cloth. Do not use solvents or petrol based fluids.
Do not install near any heat sources such as radiators, heat registers stoves or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong, the wide blade or the third prong is provided for
your safet y. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs.
Use only attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the appara
tus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, has been exposed to
rain or moisture, does not operate normally or has been dropped.
Please always connect an apparatus with Class I structure to a main socket with protective earthing connection.
Please make sure both main plug and appliance coupler work properly.
2
Unit and Accessory and Product Feature
MU TE
PO WE R
P. MO DE S. MO DE
TI TL E
LC D- ME NU DV D- SE TU P DI SP LAY
AU TO
EJ EC T
ME NU
SO UR CE
EN TE R
VO L +
CH +
VO L -
CH -
PL AY
/ PAUSE
CC
PR OG AM
Mains adaptor
3
STOP SL OW / ST EP
MT S
IN TR O
AU DI O
GO TO
SU BT IT LE
ZO OM
AN GL E
PE PE AT
AB
Mains cable
Getting Started
Getting Started
Insert a 12cm disc with the
label side facing towards you
LED
(IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby) LED Indicator: PressPOWER to turn on and off,
Indicator on(Red)
Indicator on(Green)
Standby mode
Power on mode
TV/AV
MENU
CH
VOL
POWER
4
Getting Started
Nam e
POWER (DCIN)
HDMI IN
PC Audio in
Function Description
Connect to Mains Adapter
Connect to HDMI of DVD or other equipment
PC audio input
VGA IN
VGA signal from computer output
YPbPr
Connect to the composite terminal of your DVD/VCR
S- V ideo IN
Video IN
(A UDIO) L/R
S-Video signal input
Video signal input
Audio signal input for AV
Earphone
Connect it to your head phone or other audio equipment
ANT 75Ω
Connect to antenna or cable source
5
Remote Control Key Functions
POWER
MUTE
POWER
AUTO
EJECT
Switch on LCD TV at standby mode or vice versa.
MUTE
P.MODE S.MODE
TITLE
Press to mute the sound. Press again or press VOL+
to resume.
MENU
AUTO EJECT
DVD eject
P.MODE
Press repeatedly to cycle through the available video
picture modes.
S.MODE
Press to cycle through the different sound settings.
TITLE
LCD-MENU DVD-SETUP DISPLAY
SOURCE
Press to select the DVD title.
MENU
DVD play list/ DISC menu.
NUMBER BUTTONS
Press 0-9 to select a TV channel directly when you
are watching TV. The channel change after 2 seconds.
ENTER
Press this button to enter a program number for
multiple program channel such as 2-1,etc.
VOL +
Return to the previous channel viewed.
CH +
VOL -
CH -
LCD-MENU
PLAY
/ PAUSE
STOP SLOW / STEP
AUDIO
TV system setup.
CC
MTS
GOTO
DVD-SETUP
SUBTITLE
DVD system setup.
ZOOM
DISPLAY
ANGLE
Press to display the source and channel’s information.
PROGAM
INTRO
PEPEAT
SOURCE
AB
Press to cycle through the input source in following:
TV
Composite
S-Video
Component
VGA
HDMI
THUMBSTICK
Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
6
DVD
MUTE
POWER
P.MODE S.MODE
TITLE
CH+/-
AUTO
EJECT
Press to scan through channels. To scan quickly
channels, press and hold down either+/-button.
MENU
VOL+/Press to increase/decrease the sound level.
Play/Pause
Play/Pause DVD program.
STOP
Stop DVD program.
LCD-MENU DVD-SETUP DISPLAY
SOURCE
SLOW/STEP
Play DVD programs at slow speed.
AUDIO
Select DVD disc language.
CC
DVD fast reverse. / Press to display the closed caption.
MTS
DVD fast forward. / Press to select the audio channels.
ENTER
GOTO
Play your favorite title/chapter/track.
SUBTITLE
Select DVD disc subtitle.
VOL +
CH +
VOL -
PLAY
/ PAUSE
CC
STOP SLOW / STEP
MTS
DVD previous chapter.
CH -
DVD next chapter.
AUDIO
GOTO
SUBTITLE
ZOOM
ANGLE
ZOOM
Select display mode:FULL/4:3 .
In DVD source this buttons to adjust DVD picture size.
ANGLE
Select DVD picture angle.
PROGRAM
PROGAM
INTRO
PEPEAT
AB
Press this button to change the playback order.
It varies according to the different discs.
INTRO
If you play CD,it will scan program with 3S.
REPEAT
Repeat playing the title or chapter.
A-B
Select and play the preferable paragraph of DVD
program by pressing this key twice at the beginning
and end of it.
7
Menu Operation
Menu Operation
Basic operation
The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it provides
graphical presentation.
Intitial Setup Menu
NOTE: If this is the first time you run the LCD TV, the Initial Setup Menu will appear in the picture, and
the items of this menu also exist in other menus, so you are able to change the values after you
set them up.
Initial Setup Menu
Menu Language
English
Tuning Band
Air
Auto Ch Search
To Move
Enter
To Select
Menu To Exit
Menu Language
Press ▼ / ▲ button to select this item, then press ENTER/► button to select the OSD language.
Tuning Band
Select Tuning Band mode. (Available tuning band mode: Air, Cable STD, Cable HRC, Cable IRC, Cable Auto.)
If sets Air, the range of channel is 2-69, and if sets Cable,the range of channel is 1-135.
Auto Ch Search
Press ▼ / ▲ button to select this item, then press ENTER/► button to enter the Auto Channel Search Program.
Choosing a TV channel
1. Press CH+/CH- button on the front panel or on the remote control.
Press CH+ button for the next channel
Press CH - button for the previous channel.
2. Press 0-9 buttons and -/-- button.
You can select the channel by pressing 0 to 9 buttons directly for the channel you want.
Press the -/-- button to enter a program number for digital program channel.
3. Example:
To select 1-digit channel (e.g. Channel 5): Press the 5 and ENTER button.
To select 2-digit channel (e.g. Channel 20): Press the 2 and 0 buttonts,then press ENTER button.
To select 3-digit channel (e.g. Channel 103): Press the 1 and 0 and 3 buttons,then press ENTER button.
To select a program number for multiple program channel (e.g. Channel 2-1):Press the 2 button, then press -/-- and 1
button,then press ENTER button.
Note: After select the digit button, the digit will be memorized.
8
Menu Operation
Volume adjustment
1. Press VOL+/- button to adjust the volume.
Volume
40
2. Press MUTE(
) button to mute the TV, Press MUTE(
)
button again or VOL+/- button to cancel the mute function.
The OSD ( On Screen Display) in this document may be different from your TV’s, because this is just an
reference for your product.
OSD Adjustment
- Press MENU button to display the main menu.
- Press ◄/►/▲/▼ buttons to select the available menus.
Picture
Audio
Setup
Feature
Picture
Audio
Picture Mode
Contrast
50
Brightness 50
Sharpness
50
Color
50
Tint
50
Standard
Audio
50
Treble
50
0
Setup
Full screen
Enter
To Select
Time Set
Sleep Timer
Advanced Video Menu
Feature
Menu To Exit
Enter
To Select
Tuning Band
Signal Level
Auto Channel Search
Audio
Add On Channel Search
Menu To Exit
Air
Manual Channel Set
Setup
Setup
Enter
To Move
Picture
Off
Parental Control
To Move
English
Voice
Bass
Balance
Closed Caption
Feature
Audio Language
Audio Mode
Aspect Ratio
To Move
Picture
To Select
Feature
Menu To Exit
9
Channel Labels
Menu Language
Reset
To Move
Enter
English
To Select
Menu To Exit
Menu Operation
Selecting input source
You can select the input source by pressing input button on the remote control or on the front panel.
Source list
TV
Composite
S-Video
Component
VGA
HDMI
DVD
To Move
Enter
To Select
Menu To Exit
Picture menu options
Press MENU button on the front panel or the remote control to
Picture
Audio
Setup
Feature
Picture Mode
Contrast
50
Brightness 50
Standard
display the main menu.
Press ▲/▼ button to select the PICTURE menu, then press
Sharpness
50
► button for the submenu.
Color
50
Press ▲/▼ button to select the item you want to adjust.
Tint
50
Press ENTER/► button repeatedly to adjust the value.
Aspect Ratio
Full Screen
When you are satisfied with your choice, press ◄ button to go
to the previous menu, or press MENU/EXIT button to exit.
To Move
Enter
To Select
Menu To Exit
Picture Mode
Select Picture Mode in PICTURE menu. (Available picture mode: Standard, Vivid, Bright, User.)
You should set the Picture Mode to “User” first if you want to change the value of Contrast/Brightness/Sharpness/Color/Tint,
TIPS: you can select the picture mode directly by pressing PMODE button repeatedly.
Contrast
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the contrast of the picture.
Contrast
50
Brightness
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the brightness of the picture.
Sharpness
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the sharpness of the picture.
Color
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the color saturation of the picture.
Tint
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the tint of the picture.
NOTE: The Tint item is not available but in NTSC color system.
Aspect Ratio
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the aspect the aspect ratio of the picture.
(Available aspect ratio: FullScreen, Normal, Zoom, Wide, Cinema, Waterglass.)
10
Menu Operation
AUDIO menu options
Press MENU button on the front panel or the remote control to
Picture
Audio Language
English
Audio Mode
Audio
Voice
Bass
50
Treble
50
Balance
display the main menu.
Press ▲/▼ button to select the AUDIO menu, then press
► button for the submenu.
Press ▲/▼ button to select the item you want to adjust.
0
Press ENTER/► button repeatedly to adjust the value.
Setup
When you are satisfied with your choice, press ◄ button to go
to the previous menu, or press MENU/EXIT button to exit.
Feature
To Move
Enter
To Select
Menu To Exit
Audio Mode
Select Audio Mode in AUDIO menu. (Available audio mode:
User/Voice/Concert/Jazz .)
You should set the Picture Mode to “User” first if you want to change the value of Bass/Treble.
TIPS: you can select the picture mode directly by pressing SMODE button repeatedly.
Audio Language
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the aspect the audio language.
NOTE: This item will be unavailable if the program system does not provide several audio languages.
Bass
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the bass value.
Treble
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the Treble value.
Balance
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the sound balance.
Setup menu options
Press MENU button on the front panel or the remote control to
Picture
Tuning Band
Signal Level
Auto Channel Search
Audio
Add On Channel Search
► button for the submenu.
Manual Channel Set
Press ▲/▼ button to select the item you want to adjust.
Setup
Feature
Channel Labels
Menu Language
Reset
To Move
Enter
Air
display the main menu.
Press ▲/▼ button to select the SETUP menu, then press
Press ENTER/► button repeatedly to adjust the value.
English
When you are satisfied with your choice, press ◄ button to go
To Select
to the previous menu, or press MENU/EXIT button to exit.
Menu To Exit
Tuning Band
Select Tuning Band mode. (Available tuning band mode: Air, Cable STD, Cable HRC, Cable IRC, Cable Auto.)
If sets Air, the range of channel is 2-69, and if sets Cable,the range of channel is 1-135.
11
Menu Operation
Signal Level
In DTV mode, you can refer the strength of the current channel ,and you can tune manually and adjust the angle, orientation of the antenna etc.
Weak
Normal
Good
Contrast
80
Auto Channel Search
Press ▼ / ▲ button to select this item, then press ENTER/► button to enter the Auto Channel Search Program.
Auto Ch Search - Air
Performing First Pass
Scanning
Analog Found
2
Digital Found
0
Progress(%)
12
Exit
To Exit
Add On Channel Search
Press ▼ / ▲ button to select this item, then press ENTER/► button to enter the Add On Channel Search Program.
This function will add the channels not found before, and will not delete the channels unavailable at present.
Add On Ch Search - Air
Performing First Pass
Scanning
Analog Found
2
Digital Found
0
Progress(%)
12
Exit
To Exit
Manual Channel Set
Press ENTER button to display a channel list that you can select channel as below:
Manual Channel Set Menu
Ch 42 -1
ATSCdmo
Viewable
Ch 2 -0
Viewable
Ch 11 -0
Viewable
Ch 22 -0
Viewable
Ch 31 -0
Viewable
Ch 52 -0
Viewable
Ch 54 -0
Viewable
Ch 66 -0
Viewable
Ch 68 -0
Viewable
To Move
To Change
Enter To Select
Channel labels
Allows you to name the channel selected. press ◄/► button to select the position of letter, press ▲/▼ button to set the name.
Channel Labels Menu
Ch 42-1
To Move
ATSC dmo
To Change
Exit
To Exit
Menu Language
Press ▼ / ▲ button to select this item, then press ENTER/► button to select the OSD language.
12
Menu Operation
Reset
Press ENTER/► button to reset all items to the default value.
Reset ALL?
OK
Cancel
Feature menu options
Press MENU button on the front panel or the remote control to
Picture
Audio
Time Set
Sleep Timer
Advanced Video Menu
display the main menu.
Off
Press ▲/▼ button to select the FEATURE menu, then press
Parental Control
► button for the submenu.
Closed Caption
Press ▲/▼ button to select the item you want to adjust.
Press ENTER/► button repeatedly to adjust the value.
Setup
When you are satisfied with your choice, press ◄ button to go
to the previous menu, or press MENU/EXIT button to exit.
Feature
To Move
Enter
To Select
Menu To Exit
Time Set
Press ▼ / ▲ button to select this item, then press ENTER/► button for Time Set Menu.
Time Set Menu
Time Set Mode
Auto
Time Zone
Pacific
Year
2008
Date
Mar 29
Time
10:00 AM
To Move
Enter To Select
Exit
To Exit
Time Set Mode
Press ENTER/► button to select the time set mode from AUTO and MANUAL.
(Available aspect ratio: FullScreen, Normal, Zoom, Wide, Cinema, Waterglass.)
You should set the Time Set Mode to “Manual” first if you want to change the value of Time Zone/Year/Date/Time.
Time Zone
Press ▼ / ▲ button to select this item, then press ENTER/► button to select the time zone for your TV.
Sleep Timer
Select the sleep time to put automatically the TV in standby mode. Timer can be selected as 5min/10min/15min/30min/45min/
60min/90 min/120 min/180 min/240 min/Off.
Also you can select the sleep time by pressing SLEEP button repeatedly..
Advanced Video Menu
Press ▼ / ▲ button to select this item, then press ENTER/► button for Advanced Video Menu.
Advanced Video Menu
Noise Reduction
Medium
Color Temperature
Normal
3D Y/C
On
Adaptive Contrast
On
Gradient Enable
On
Blue Screen
On
Audio Only
To Move
Enter To Select
Exit
To Exit
13
Menu Operation
Noise Reduction
Press ENTER/◄/► button to select the level of noise reduction from Off/Low/Medium/High.
Color Temperature
Press ENTER/◄/► button to select the color temperature from Cool/Normal/Warm.
3D/YC
Press ENTER/◄/► button to set the 3D/YC on or off.
Adaptive Contrast
Press ENTER/◄/► button to set the Adaptive Contrast on or off.
Gradient Enable
Press ENTER/◄/► button to set the Gradient Enable on or off.
Blue Screen
Press ENTER/◄/► button to set the Blue Screen on or off.
Audio only:
Press ENTER/button to turn off the video picture ,listen the audio only.
Parental Control
You need to enter the password for the submenu. And the original password is 0000.
Enter Password
*
Parental Control Menu
Password Set
Master Lock
On
Unrated lock
On
US Ratings
Canadian Rating
Advanced Rating
To Move
On
Enter
To Select
Exit
To Exit
Password Set
You need to enter the correct old password before setting a new password, and after set the new password, you need to
enter it again to confirm it.
Enter Old Password
*
Enter New Password
*
Confirm New Password
*
Master Lock
Press ENTER/► button to set the Master Lock on/off, if you set this function on, all the parental control lock will be
unavailable and it can play all kinds of programs.
Unrated Lock
Press ENTER/► button to set the Unrated Lock on/off, if you set this function on, all the programs will be locked even they
are unrated program.
14
Menu Operation
US Ratings
Press ▼ / ▲ button to select this item, then press ENTER/► button for US Ratings Menu.
Canadian Rating Menu
Press ▼ / ▲ button to select this item, then press ENTER/► button for Conadian Rating Menu.
Canadian Rating Menu
US Ratings Menu
MPAA
TV Rating
ALL FV
Canadian English
L
S
V
Candlan French
D
NONE
NONE
E
G
TV-Y
C
E
G
PG
TV-Y7
C8+
8 ans+
PG-13
TV-G
G
13 ans+
R
TV-PG
PG
16 ans+
NC-17
TV-14
14+
18 ans+
X
TV-MA
18+
Enter To Select
To Move
Exit
To Move
To Exit
Enter To Select
Exit
To Exit
Advanced Rating
Press ▼ / ▲ button to select this item, then press ENTER/► button to set advanced rating on/off.
Closed Caption
Press ▼ / ▲ button to select this item, then press ENTER/► button for Closed Caption Menu.
Closed Caption
CC Mode
CC Off
Analog CC
CC1
Digital CC
CS1
Advanced CC Settings
Enter To Select
To Move
Exit
To Exit
CC Mode
Press ENTER/► button to select CC Mode from CC Off / CC On / CC Mute.
Analog CC
Press ENTER/► button to select Analog CC Mode.
Digital CC
Press ENTER/► button to select Digital CC Mode.
Advanced CC Settings
Press ENTER/► button for Advanced CC Settings Menu.
Digital Closed Caption
Style
Automatic
Size
Automatic
Font
Automatic
Text Color
Automatic
Text Opacity
Background Color
Background Opacity
Edge Effect
Edge Color
Automatic
Automatic
Automatic
Automatic
Automatic
CC SAMPLE
To Move
Enter To Select
Exit
To Exit
- Style: Press ENTER/► button to select CC Style between Automatic and Custom, you need to set it to Custom first if
you want to change the value of items below.
- Size: Normal/Large and Small.
- Font: From Font1 to Font7.
- Text Color: Red/Green/Blue/Yellow/Magenta/Cyan/Black/White.
15
Menu Operation
- Text Opacity: Solid/Flashing/Transparent/Translucent.
- Background Color: Black/White/Red/Green/Blue/Yellow/Magenta/Cyan.
- Background Opacity: Solid/Flashing/Transparent/Translucent.
- Edge Effect: None/Raised/Depressed/Uniform/Left Shadow/Right Shadow.
- Edge Color: Black/White/Red/Green/Blue/Yellow/Magenta/Cyan.
Feature menu options in VGA
Press Input button to select the input source to VGA.
Picture
Audio
Time Set
Sleep Timer
Advanced Video Menu
VGA Set
Off
Setup
Feature
To Move
OK
To Select
Menu To Exit
VGA Set
Press ▼ / ▲ button to select VGA Set, then press ENTER/► button for VGA Setting Menu.
VGA Setting-1024x768@70Hz
H-Position
V-Position
Clock
Phase
Auto Adjust
Setting
50
50
50
50
Preset
To Move
OK
To Select
Menu To Exit
H-Position
Press ENTER/► button to adjust the horizontal position of the picture.
V-Position
Press ENTER/► button to adjust the vertical position of the picture
Clock
Press ENTER/► button to adjust the clock of the picture.
Phase
Press ENTER/► button to adjust the phase of the picture.
Auto Adjust
Press ENTER/► button to auto adjust the VGA setting.
Setting
Press ENTER/► button to reset the VGA setting to factory default.
16
Menu Operation
Feature menu options in Component
Press Input button to select the input source to component.
Time Set
Sleep Timer
Advanced Video Menu
Component Set
Picture
Audio
Off
Setup
Feature
To Move
OK
To Select
Menu To Exit
Component Set
Press ▼ / ▲ button to select
Component Set, then press ENTER/► button for
Component Setting-720x480I@30/29.97Hz
H-Position
V-Position
Clock
Phase
Auto Adjust
Setting
50
50
50
50
Preset
To Move
OK
To Select
Menu To Exit
H-Position
Press ENTER/► button to adjust the horizontal position of the picture.
V-Position
Press ENTER/► button to adjust the vertical position of the picture
Clock
This function is unavailable in component mode.
Phase
Press ENTER/► button to adjust the phase of the picture.
Auto Adjust
This function is unavailable in component mode.
Setting
Press ENTER/► button to reset the
Component Setting to factory default.
17
Component Setting Menu.
DVD Operation
DVD Operation
Title: DVD Video discs are usually divided into several numbered sections called titles.
Chapter: A title comprises smaller numbered sections called chapters.
Playing the DVD Player
1. Press the ‘SOURCE button to select ‘DVD’ mode, if no disc is inserted yet, the display shows ‘No Disc’.
2.Insert a DVD with the label printed side facing towards you.
3.The TV will first display ‘Loading’, then change to ‘DVD-video’. Most DVDs will show some preliminary
information then stop at a main menu screen.
4. Press PLAY/PAUSE to play it directly. Or press the DVD-MENU button to access the disc menu during
playback.
5.Use the direction button on the remote control to select the desired option. Press ENTER to select the
option or press the ► button. Playback will now commence.
6.After playback, press the EJECT button on remote control or EJECT button on TV/DVD to remove the
disc.
Note: No function‘’ will sometimes appear on the screen after a button is pressed. This indicates that the
function is not supported at the current time.
Getting Started
Carefully remove the TV / DVD and all other items from the box. You may wish to store the packaging for
future use.
Please read these instructions thoroughly before use.
Compatible Discs
The DVD player supports the following disc formats:
12cm DVD Video Discs.
12cm Compact Disc Audio Discs.
12cm Still High Resolution
WARNING! DO NOT INSERT OR PLAY 8CM DISCS, THEY WILL GET STUCK.
Basic Control Function
Play/Pause
1.Press the ► button to play/ pause the DVD. The screen will freeze its current picture when paused.
2. For resume play, press the ► button.
Stop
After pressing the button to stop playback. 'Press Play Key To Continue' will be displayed on the top left
on the screen, also '■' on the top right. Press the► button to resume playback.
Press the''button twice to stop playback completely. '' Will be displayed on the screen.
Fast Playback
You can search either forwards or backwards for a particular part of the DVD.
To search forwards, press the buttons►►.
The playback speed is doubled and 'FORWARD X2' is displayed.
Each subsequent press of the ►►button toggles among different speeds (►►2X - ►►4X - ►►8X ►►16X - ►►32X -PLAY),up to 32 times the normal speed. Pressing the buttons ►► after '' ►►32X'
reverts to normal playback speed.
To resume normal playback at any time, press the► buttons.
To search backwards, press the
button. This operates in the same way as the ►►button but in the
reverse direction.
Subtitles
Most DVDs are recorded with subtitles and some have the subtitles available in different languages.
To select subtitles, press the SUB-T button.
If different languages are available, repeatedly press the SUB-T button until the language you require is
displayed.
18
DVD Operation
Chapter Selection
During playback you can select different chapters of the DVD.Press DVD-MENU to the root menu.
Press direction buttons or Next, PREVIOUS buttons to choose different chapters. Note: It is just for
reference.
Press ENTER button to confirm.
Audio Configuration
Some DVDs are recorded with multiple audio channels. These can be used for different languages or for
commentaries.
Repeatedly press the AUDIO button to select the desired audio channel.
Repeat Chapter/Title
To repeat playback of a chapter, press the REPEAT button while the chapter is playing. 'Chapter' will be
displayed.
To repeat playback of the title, press the REPEAT button twice.'Title' will be displayed.
To repeat playback of the title, press the REPEAT button three times.'All' will be displayed.
Press the REPEAT button four times to cancel repeat playback.
Program Play
1. Compatible with DVD, CD, HD-CD, WMA, Digital Audio disc /JPEG discs.
2. The Program Playback option allows you to enter the order in which you want chapters or tracks to play,
maximum to 16.
3. Program Menu: If PBC is on, this operation will turn PBC off while the chapters / tracks play in programmed
order.
4. According to the highlight, use the Numeric buttons to enter the chapters / tracks in the order you want
them to play. Then press Play or use Arrow buttons to highlight the "PLAY" item and press Enter. The
chapters /tracks will play in the programmed order. You can program maximum 16 titles / chapters / tracks.18
5. According to the Direction Indicator on the menu, you can press Arrow buttons to highlight where youwant to
enter.
6. During Program Playback, if program button is repressed, the program order and the contents will be
displayed on the screen, and the Program Playback will be stopped; also you can press Stop and
Play to resume normal playback.
7. Notes:
To clear the program order, use Arrow buttons to highlight the "CLEAR" item, then press Enter.
To modify the program order, use Arrow buttons to highlight the item you are changing and enter the
new chapter / track you want to program directly.
8. The program indicator in the screen and the playing chapter / track illuminate.
Note: Some discs do not support the repeat function, different disc shows different information.
OSD Menu In DVD Mode
General Setup Page
Press SOURCE button on the remote control ,then select DVD item in Source list
a. Press DVD-SETUP button on remote control during playing DVD, it will show following menu:
(When the DVD menu displayed ,the DVD system will auto pause. Press SETUP again, it will go on)'
b. Press “▼/▲”to choose the items, then enter the desired item with ENTER button. It has been set
already when the desired item becomes red.
Note: Press Left button to get back the previous menu.
c. Press SETUP to exit the menu.
19
DVD Operation
d. The items of the menu as below:
OSD Lang.: Set the language of OSD menu. Default setting is English.
Last Memory: set it on to memorize the last stop point. During playing the DVD, you change to other
mode. When you come back to DVD mode, it can play automatically from the last stop point.
Audio Setup Page
a. Press SETUP button on remote control during playing DVD, Press “ ◄/► ” until it will show following menu:
(When the DVD menu displayed ,the DVD system will auto pause. Press SETUP again, it will go on)'
b. Press “▼/▲”to choose the items, then enter the desired item with ENTER button. It has been set already
when the desired item becomes red.
Note: Press Left button to get back the previous menu.
c. Press SETUP to exit the menu.
d. The items of the menu as below:
Downmix: choose the downmix mode. There is only one item--stereo.
Preference Page
a. Press SETUP button on remote control during there no disc in the DVD player , Press “ ◄/► ” until
Preference will show following menu:(When the DVD menu displayed ,the DVD system will auto pause.
Press SETUP again, it will go on)'
b. Press “▼/▲”to choose the items, then enter the desired item with ENTER button. It has been set already
when the desired item becomes red.
Note: Press Left button to get back the previous menu.
c. Press SETUP to exit the menu.
d. The items of the menu as below:
20
Disc Care
Audio;Choose the default language you would prefer to for DVD titles.
Subtitle: Set the language of subtitle menu or turn off the Subtitle.
Note: not all DVD discs are recorded or offer subtitles in multiple language.
Disc Menu: set the default language of Disc menu.
Parental: movies rated higher than the level set will not be played by selecting a certain access level. The
parental lock can only be changed after input the correct password.
Note: This function is available only when the discs have rating encoded on.
It will ask a password when you select a level except for Adult. The factory setting of the password is
136900. Press Down button to the 'OK' after finishing input of the password, then press ENTER button to
confirm and go back to the previous menu.
Password: Reset the password. The password should be 4-digit, and the initial password is 136900
(It is also the supercode).
Note: Press Down button to the 'OK' after finishing input of the password, then press ENTER button to
confirm and go back to the previous menu.If you forget the old password, you can always use the factory
setting password '136900'.
Default: Default the factory' settings EXCEPT the password.
Disc Care
About Disc Terms Title
Generally, pictures or music compressed on a DVD are divided into several sections, "title".
Chapter
The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of one
or more chapters and each of them is numbered for easy searching, but some discs may not have a
recording chapter.
Track
A segment of picture or music on a CD, Each track is numbered for searching.
Care of Disc
Video disc contains high-density compressed data that needs proper handling.
1. Hold the disc with fingers by outer edge and/or the center spindle hole. Do not touch the discs surface.
2.Do not bend or press the disc.
3.Do not expose the disc to direct sunlight or heating sources, Stere discs in cabinet vertically, and in dry
condition.
Prevent exposure to:
Direct sunlight
Heat or exhaust from a heating device
Extreme humidity
Clean the disc surface with a soft, dry cleaning cloth, Wipe the disc surface gently and radically from
center toward the outer edge.
Do not apply thinner, alcohol, chemical solvent, or sprays when cleaning. Such cleaning
fluids will permanently damage the disc surface.
21
Simple Troubleshooting
Simple Troubleshooting
22
Techincal Specifications
Techincal Specifications
TV
TV System
Screen siz e
Resolution
Aerialinput
Audio output power
ATSC/ NTSC
15"(diagonal)
1280x800pixels (RGB)
75
(unbalanced)
2x3 W
Power Consumption
45W
Remote control
Type
Control distance
Control angle
Batteries
Weight
infrared
5m
30° ( horizontal)
2 x 1.5 V, size AAA
70 g (without battery)
23
Download PDF

advertising