User`s guide | ACCO Brands NOBO Projector User Manual

Table of Contents
Table of Contents ......................................................................................... 1
Usage Notice ................................................................................................ 2
Precautions ..........................................................................................................2
Introduction .................................................................................................. 4
Product Features ..................................................................................................4
Package Overview ...............................................................................................5
Product Overview .................................................................................................6
Main Unit ........................................................................................................................6
Control Panel .................................................................................................................7
Connection Ports ...........................................................................................................8
Wireless Remote Control ...............................................................................................9
Installation .................................................................................................. 10
Connecting the Projector ....................................................................................10
Powering On/Off the Projector ...........................................................................11
Powering On the Projector ........................................................................................... 11
Powering Off the Projector ...........................................................................................12
Warning Indicator .........................................................................................................12
Adjusting the Projected Image ...........................................................................13
Adjusting the Projector Image Height ..........................................................................13
Adjusting the Projector Zoom / Focus ..........................................................................14
Adjusting Projected Image Size ...................................................................................14
User Controls ............................................................................................. 15
Control Panel & Remote Control ........................................................................15
On-Screen Display Menus .................................................................................17
How to Operate ............................................................................................................17
Menu Tree ....................................................................................................................18
Language .....................................................................................................................19
Image-I ........................................................................................................................20
Image-II (Computer Mode)...........................................................................................22
Image-II (Video Mode) .................................................................................................24
Audio ............................................................................................................................26
Management ................................................................................................................27
Lamp Setting ...............................................................................................................30
Appendices ................................................................................................ 31
Troubleshooting ..................................................................................................31
Replacing the Lamp.............................................................................................35
Compatibility Modes ...........................................................................................36
Ceiling Mount Installation ...................................................................................37
1
... English
Usage Notice
Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit.
Excessive use of your unit may invalidate your warranty
(normal use defined as 8 hours a day 5 days a week).
Warning- Do not look into the projector’s lens when the lamp is
on. The bright light may hurt your eyes.
Warning- Children should be supervised at all times when
projector is in use.
Warning- To reduce the risk of fire or electric shock, do not
expose this product to rain or moisture.
Warning- Please do not open or disassemble the product as this
may cause electric shock.
Warning- When changing the lamp, please allow unit to cool
down, and follow all changing instructions.
Warning- This product will detect the life of the lamp itself.
Please be sure to change the lamp when it shows
warning messages.
Warning- Reset the “Lamp Reset” function from the On Screen
Display “Lamp Setting” menu after replacing the lamp
module (refer to page 30).
Warning- When switching the projector off, please ensure the
projector completes its cooling cycle before
disconnecting power.
Warning- Turn on the projector first and then the signal sources.
Warning- Do not use lens cap when projector is in operation.
Warning- When the lamp reaches the end of its life, it will burn
out and may make a loud popping sound. If this
happens, the projector will not turn back on until the
lamp module has been replaced. To replace the lamp,
follow the procedures listed under “Replacing the
Lamp” (refer to page 35).
English ...
2
Usage Notice
Do:
Turn off the product before cleaning.
Use a soft cloth moistened with mild detergent to clean the
display housing.
Disconnect the power plug from AC outlet if the product is not
being used for a long period of time.
Don’t:
Block the slots and openings on the unit provided for
ventilation.
Use abrasive cleaners, waxes or solvents to clean the unit.
Use under the following conditions:
- In extremely hot, cold or humid environments.
- In areas susceptible to excessive dust and dirt.
- Near any appliance that generates a strong magnetic field.
- Place in direct sunlight.
3
... English
Introduction
Control Panel
1
2
3
10
4
9
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
8
7
4
6
5
Power Indicator LED
Temp Indicator LED
Lamp Indicator LED
Keystone Correction
Power/Standby
Re-Sync
Source
Four Directional Select Keys
Menu (On/Off)
Enter
7
... English
Introduction
Connection Ports
7
8
1.
2.
3.
4.
5.
6.
7.
6
5
4
3
2
1
9
IR Receiver
USB Connector
Monitor Loop-through Output Connector
Composite Video Input Connector
S-Video Input Connector
Audio Input Connector
PC Analog signal/SCART RGB/HDTV/Component Video
Input Connector
8. PC Analog signal/HDTV/Component Video Input
Connector
9. KensingtonTM Lock Port
English ...
8
Introduction
Wireless Remote Control
1
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
Power
IR LED
Hide
Freeze
D-Zoom
Display Mode
Menu
Keystone Correction
Re-Sync
Volume +
Volume Reset
Enter
Four Directional
Select Keys
VGA1 Source
VGA2 Source
Composite Video
Source
S-Video Source
2
3
8
9
4
10
5
11
6
12
7
13
14
15
17
16
18
9
... English
Installation
Powering On/Off the Projector
Powering On the Projector
Quick Menu
Select Language
English
Deutsch
Français
Italiano
Español
Português
Nederlands
Polski
1. Remove the lens cap. 1
2. Ensure that the power cord and signal cable are securely
connected. The Power LED will flash green.
3. Turn on the lamp by pressing “Power/Standby” button on
the control panel. 2 The Power LED will turn green.
The first time you use the projector, you can select your
preferred language from the quick menu after the startup
screen display.
4. Turn on your source (computer, notebook, video player,etc.).
The projector will detect your source automatically.
Press Enter to Set
If you connect multiple sources at the same time, use the
“Source” button on the control panel or remote control
to switch.
2
Power/Standby
Turn on the projector
first and then the signal
sources.
Lens Cap
1
11
... English
Installation
Powering Off the Projector
1. Press the “Power/Standby” button to turn off
the projector lamp, you will see a message “
” displayed on the projector’s screen. Press the “Power/Standby” button again
to confirm, otherwise the message will disappear after 5
seconds.
Please note that if the key is pressed instead, the projector will enter the “Picture Mute” mode and no image will
be displayed. To exit the “Picture Mute” mode, press the
“Power/Standby” button again.
2. The cooling fans continue to operate for about 30 seconds
for cooling cycle and the Power LED will turn green. When
the Power LED begins flashing, the projector has entered
standby mode.
If you wish to turn the projector back on, you must wait
until the projector has completed the cooling cycle and has
entered standby mode. Once in standby mode, simply press
“Power/Standby” button to restart the projector.
3. Disconnect the power cord from the electrical outlet and the
projector.
4. Do not turn on the projector immediately following a power
off procedure.
Warning Indicator
When the “LAMP” indicator lights solid red, the projector
will automatically shut itself down. Please contact your local
reseller or service center (refer to pages 33~34).
When the “TEMP” indicator lights solid red for about 60
seconds, it indicates the projector has overheated. The
projector will automatically shut itself down.
Under normal conditions, the projector can be switched on
again after it has cooled down. If the problem persists, you
should contact your local dealer or our service center
(refer to pages 33~34).
English ...
12
When the “TEMP” indicator flashes red for about 5 seconds,
it indicates the fan failed. Please contact your local dealer or
our service center (refer to pages 33~34).
Installation
Adjusting the Projected Image
Adjusting the Projector Image Height
The projector is equipped with an elevator foot for adjusting the
image height.
To raise the image:
1. Press the elevator button
1
.
2. Raise the image to the desired height angle 2 , then release
the button to lock the elevator foot into position.
3. Use
3
to fine-tune the display angle.
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the
elevator foot into position.
3. Use
3
to fine-tune the display angle.
1
Elevator Button
3
2
3
Elevator Foot
Tilt Adjusting
Feet
13
... English
User Controls
Control Panel & Remote Control
There are two ways for you to control projector functions:
Remote Control and Control Panel.
Control Panel
Remote Control
Using the Control Panel
Power/Standby
Refer to the “Power On/Off the Projector” section on pages
11-12.
Source
Press “Source” to choose RGB, Component-p, Component-i,
S-Video, Composite Video and HDTV sources.
Menu
Press “Menu” to launch the on-screen display (OSD) menu.
To exit OSD, press “Menu” again.
Keystone /
Adjusts image distortion caused by tilting the projector (±15
degrees).
Four Directional Select Keys
Use
to select items or make adjustments to your
selection.
Enter
Confirm your selection of items.
Re-Sync
Automatically synchronises the projector to the input source.
15
... English
User Controls
Using the Remote Control
Power
Refer to the “Power On/Off the Projector” section on pages 11-12.
Re-Sync
Automatically synchronises the projector to the input source.
Volume + / - (Vol+/Vol-)
Increases/decreases speaker volume.
Reset
Changes the adjustments and settings to the factory default
value.
Hide
Press “Hide” to hide image, press again to restore display of the
image.
Keystone
/
Adjusts image distortion caused by tilting the projector (±15
degrees).
Freeze
Press “Freeze” to pause the screen image.
D-Zoom
Press “D-Zoom” button to zoom in on an image.
Display Mode
Select the display mode from PC, Movie, Game, sRGB and User.
Four Directional Select Keys
Use
to select items or make adjustments to
your selection.
Enter
Confirm your selection of items.
Menu
Press “Menu” to launch the on-screen display menu. To exit
OSD, press “Menu” again.
VGA1
Press “VGA1” to choose VGA1 connector.
VGA2
Press “VGA2” to choose VGA2 connector.
S-Video
Press “S-Video” to choose S-Video source.
Composite
English ...
16
Press “composite” to choose composite video source.
User Controls
On Screen Display Menus
The Projector has multilingual On Screen Display menus that
allow you to make image adjustments and change a variety of
settings. The projector will automatically detect the source.
How to operate
1. To open the OSD menu, press “Menu
” on the Remote Control
or Control Panel.
2. When OSD is displayed, use
keys to select any item in the
main menu. While making a selection on a particular page, press
or “Enter” key to enter sub menu.
3. Use
keys to select the desired item and adjust the
key.
settings by
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press “Menu
” to confirm, and the screen will return to the main
menu.
6. To exit, press “Menu
”again. The OSD menu will close and the
projector will automatically save the new settings.
Main Menu
Sub Menu
Setting
17
... English
User Controls
Menu Tree
English/Deutsch/Français/Italiano/Español/
Português/Nederlands/Polski
English ...
18
User Controls
English
Português
Français
Nederlands
Deutsch
Italiano
Español
Language
Polski
Language
Choose the multilingual OSD menu . Use the
your preferred language.
or
key to select
Press “Enter” to finalise the selection.
19
... English
User Controls
Image-I
Display Mode
There are many factory presets optimised for various types of
images.
O PC: For computer or notebook.
O Movie: For home theater.
O Game : For game.
O sRGB: For standard colour.
O User: Memorise user’s settings.
Brightness
Adjust the brightness of the image.
O Press the
to darken the image.
O Press the
to lighten the image.
Contrast
The contrast controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.
O Press the
to decrease the contrast.
O Press the
to increase the contrast.
Keystone (Keystone Correction)
Adjust image distortion caused by tilting projector. (±15 degrees)
Colour
Press “Enter” to adjust the red, green and blue colours.
White Peaking
Use the white peaking control to set the white peaking level of
DMD chip. 0 stands for minimal peaking, and 10 stands for
English ...
20
User Controls
maximum peaking. If you prefer a stronger image, adjust towards
the maximum setting. For a smooth and more natural image,
adjust towards the minimum setting.
Colour Temp.
Adjust the colour temperature. At a higher temperature, the screen
looks colder; at a lower temperature, the screen looks warmer.
21
... English
User Controls
Image-II
(Computer Mode)
Frequency
“Frequency”changes the display data frequency to match the
frequency of your computer’s graphic card. If you experience a
vertical flickering bar, use this function to make an adjustment.
Tracking
“Tracking” synchronises the signal timing of the display with the
graphic card. If you experience an unstable or flickering image, use
this function to correct it.
H.Position (Horizontal Position)
Y Press the to move the image left.
Y Press the to move the image right.
V. Position (Vertical Position)
Y Press the to move the image down.
Y Press the to move the image up.
Degamma
This allows you to choose a degamma table that has been finetuned to bring out the best image quality for the input.
Aspect Ratio
Use this function to choose your desired aspect ratio.
English ...
22
Y
4:3 : The input source will be scaled to fit the projection
screen.
Y
16:9 : The input source will be scaled to fit the width of
the screen.
Y
Window: When a 4:3 image is bigger than a 16:9 screen,
select the “Window” mode to fit the image onto the screen
without changing the projection distance.
User Controls
Original Pixel
Window
16:9 Image Position
Adjust the image position to up or down, when you select the
aspect ratio to 16:9.
O Press the
to move the image down.
O Press the
to move the image up.
O 16:9 Image Position:
Image Position at window mode will also be
moved accordingly.
23
... English
User Controls
User Controls
Image-II
(Video Mode)
Degamma
This allows you to choose a degamma table that has been finetuned to bring out the best image quality for the input.
Saturation
Adjusts a video image from black and white to fully saturated
colour.
O Press the
to decrease the amount of colour in the image.
O Press the
to increase the amount of colour in the image.
Tint
Adjusts the colour balance of red and green.
O Press the
to increase the amount of green in the image.
O Press the
to increase the amount of red in the image.
Sharpness
Adjusts the sharpness of the image.
O “Saturation”, “Tint”
and “Sharpness” function is not supported
under DVI-D mode.
O Press the
to decrease the sharpness.
O Press the
to increase the sharpness.
Aspect Ratio
Use this function to choose your desired aspect ratio.
English ...
24
O
4:3 : The input source will be scaled to fit the projection
screen.
O
16:9 : The input source will be scaled to fit the width of
the screen.
O
Window: When a 4:3 image is bigger than a 16:9 screen,
select the “Window” mode to fit the image onto the screen
without changing the projection distance.
User Controls
Original Pixel
Window
16:9 Image Position
Adjust the image position to up or down, when you select the
aspect ratio to 16:9.
O Press the
to move the image down.
O Press the
to move the image up.
O 16:9 Image Position:
Image Position at window mode will also be
moved accordingly.
25
... English
User Controls
Security Settings
A. Press “Enter” to set password. (First time)
1. Password must be 4~8 bits, the default value is “0000”.
2. Displayed on the screen by “*” while inputting.
keys to select your input bits, and then press
3. Use
“Enter” key to confirm your selection.
4. Move to
and then press the “Enter” key to confirm finally.
5. On this screen, press the “Menu” key which will automatically
jump to
then press the “Enter” key to confirm your selection.
(“Menu” can be switched over between the position and
at present)
6. When there is an input error go to
to delete this bit. (You can
key.)
press the “Menu”, key and then press the
B. Press “Enter” to set security protection.
O Security Mode
I On: Choose “On” to use security verification while the user
switches on the projector.
I Off: When the user switches on projector without password.
I Timer: Displays the usable hours when switching on the projec-
tor. When the time remaining is 0, the time out message will
appear, and then press “Menu” or “Enter” to input password.
O Timer Setting: When the Timer is selecting, this function can be
used.
O Change Password: Press “Enter” to change the password.
English ...
28
User Controls
1. Input the old password.
2. Changes a new password.
3. Confirms the password, please input the new password once
again.
4. Password must be 4~8 bits, Default value is “0000”.
5. Displayed on the screen by “*” while inputting.
keys to select your input bits, and then press
6. Use
the “Enter” key to confirm your selection.
7. Move to
and then press the “Enter” key to confirm finally.
8. On this Screen, press the “Menu” key to switch between the
position at present to, Old Password, New Password, Confirm
Password and
.
to delete the bit.
9. When there is an input error go to
key.)
(You can press the “Menu”, and then press the
Zoom
O Press the
to reduce the size of an image.
O Press the
to magnify an image on the projection screen.
Reset
Choose “Yes” to return the display parameters on all menus to the
factory default settings.
29
... English
User Controls
Lamp Setting
Lamp Hours
Display the cumulative lamp operating time.
Lamp Reset
Reset the lamp life hour after replacing a new lamp.
Lamp Reminding
Choose this function to show or to hide the warning message when
the changing lamp message is displayed. The message will show up
30 hours before end of life.
ECO Mode
Choose “On” to dim the projector lamp which will lower power
consumption and extend the lamp life by up to 130%. Choose ”Off”
to return to normal mode.
Auto Power Off (min)
Sets the interval of power-off of the system, if there is no signal
input (in minutes).
English ...
30
Appendices
Troubleshooting
If you experience trouble with the projector, refer to the
following information. If the problem persists, please
contact your local reseller or service center.
Problem: No image appears on screen
O
Ensure all the cables and power connections are correctly and
securely connected as described in the “Installation” section.
O Ensure the pins of connectors are not crooked or broken.
O Check if the projection lamp has been securely installed. Please
refer to the “Replacing the lamp” section (page 35).
O Make sure you have removed the lens cap and the projector is
switched on.
O
Ensure that the “Hide” feature is not turned on.
Problem: Partial, scrolling or incorrectly displayed image
O
Press “Re-Sync” on the remote control or control panel.
O If you are using a PC:
For Windows 3.x:
1. In the Windows Program Manager, double click the “Windows
Setup” icon in the main group.
2. Verify that your display resolution setting is less than or equal
to 1280 x 1024.
For Windows 95, 98, 2000, XP:
1. From the “My Computer” icon, open the “Control Panel”
folder, and double click the “Display” icon.
2. Select the “Settings” tab.
3. Click on the “Advanced Properties” button.
If the projector is still not projecting the whole image, you will
also need to change the monitor display you are using. Refer to
the following steps.
4. Verify the resolution setting is less than or equal to 1280 x 1024
resolution.
31
... English
Appendices
5. Select the “Change” button under the “Monitor” tab .
6. Click on “Show all devices.” Next, select “Standard monitor
types” under the SP box; choose the resolution mode you need
under the “Models” box.
O
If you are using a Notebook:
1. First, follow the steps above to adjust resolution of the
computer.
2. Press the toggle output settings. example:[Fn]+[F4]
Compaq=> [Fn]+[F4]
Packard
Dell =>
[Fn]+[F8]
Hewlett => [Fn]+[F4]
Gateway=> [Fn]+[F4]
NEC=>
[Fn]+[F3]
IBM=>
[Fn]+[F7]
Toshiba => [Fn]+[F5]
Mac Apple:
System Preference-->Display-->Arrangement-->Mirror
display
O
If you experience difficulty changing resolutions or your
monitor freezes, restart all equipment including the projector.
Problem: The screen of the Notebook or PowerBook computer
is not displaying a presentation
O
If you are using a Notebook PC:
Some Notebook PCs may deactivate their own screens when a
second display device is in use. Each has a different way to be
reactivated. Refer to your computer’s documentation for detailed
information.
Problem: Image is unstable or flickering
O
Use “Tracking” to correct it.
O Change the monitor colour setting from your computer.
Problem: Image has vertical flickering bar
O
Use “Frequency” to make an adjustment.
O Check and reconfigure the display mode of your graphic card to
make it compatible with the product.
Problem: Image is out of focus
O
English ...
32
Adjusts the Focus Ring on the projector lens.
Appendices
O
Make sure the projection screen is between the required distance 4.9
to 39.4 feet (1.5 to 12.0 meters) from the projector (refer to page 14).
Problem: The image is stretched when displaying 16:9 DVD
The projector automatically detects 16:9 DVD and adjusts the aspect
ratio by digitizing to full screen with 4:3 default setting.
If the image is still stretched, you will also need to adjust the aspect
ratio by referring to the following:
O Please select 4:3 aspect ratio type on your DVD player if you are
playing a 16:9 DVD.
O If you can’t select 4:3 aspect ratio type on your DVD player, please
select 4:3 aspect ratio from the on screen menu.
Problem: Image is reversed
O
Select “Management-->Projection” from the OSD and adjust the
projection direction.
Problem: Lamp burns out or makes a popping sound
O
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will not
turn on until the lamp module has been replaced. To replace the
lamp, follow the procedures in the “Replacing the Lamp” section
(refer to page 35).
Problem: LED lighting message
Message
Standby State
(Input Power Cord)
Power-LED
(Green)
Temp-LED
Lamp-LED
Flashing
Lamp Lighting
Power On
Power Off (Cooling)
Steady light =>
No light =>
Error (Lamp Fail)
Error (Thermal Fail)
Error (Fan Fail)
Flashing
Error (Over Temp.)
Error (Lamp Breakdown)
33
... English
Appendices
Appendices
Problem: Message Reminders
English ...
34
O
Fan failed:
O
Over temperature:
O
Replacing the lamp:
O
Password error :
O
Time out:
Appendices
Replacing the lamp
The projector will detect the lamp life itself. It will show you a
warning message
Warning: Lamp
compartment is hot!
Allow it to cool down
before changing lamp!
“
”
When you see this message, change the lamp as soon as possible.
Make sure the projector has cooled down for at least 30
minutes before changing the lamp.
1
3
2
4
Lamp Replacing Procedure:
Warning: To
reduce the risk of
personal injury, do not
drop the lamp module
or touch the lamp bulb.
The bulb may shatter
and cause injury if it is
dropped.
1. Switch off the power to the projector by pressing the Power/
Standby button.
2. Allow the projector to cool down for at least 30 minutes.
3. Disconnect the power cord.
4. Use a screwdriver to remove the screw from the cover. 1
5. Push up and remove the cover. 2
6. Remove the 2 screws from the lamp module. 3
7. Pull out the lamp module. 4
To replace the lamp module, reverse the previous steps.
35
... English
Appendices
Ceiling Mount Installation
1. To prevent damaging your projector, please use the ceiling
mount package for installation.
2. If you wish to use a third party ceiling mount kit, please
ensure the screws used to attach a mount to the projector
meet the following specifications:
Screw type: M2.6
Maximum screw length: 10mm
O Please note that
damage resulting from
incorrect installation
will invalidate the warranty.
Minimum screw length: 8mm
37
... English
Download PDF

advertising