Instructions for Use
Washing machine
Thank you for your confidence in purchasing our washing machine, and
congratulations on the excellent choice.
Your new washing machine meets the requirements of modern treatment of
laundry. It is rational in the consumption of energy, water and washing agents.
Our appliances are friendly to the environment. Some of the materials may be
recycled, others deposited or decomposed. To avoid pollution of environment,
once your appliance is no longer useful, take it to your local authorized waste
appliance dealer.
The appliance is intended exclusively for use in households. If the appliance is
used for professional purposes, for profit, or for purposes beyond regular use
in a household, or if appliance is used by a person who is not a consumer, the
warranty period equals the shortest warranty period possible as stipulated by
the relevant legislation.
187352
Description of washing machine...................... 3
Cautions.............................................................. 4
Installation and connection............................... 6
Operation.......................................................... 10
Tips for washing and energy saving.............. 16
Cleaning and maintenance.............................. 18
Failures.............................................................. 21
Tables................................................................ 24
Description of washing machine
Technical information
(depending on model)
5. Adjustable legs
6. Water outlet hose
7. Water inlet hose
8. Mains power cable
Dimensions (w x d x h):
600 mm x 600 mm x 850 mm
Depth with door open: 106 cm
Weight (net): 90 kg
Nominal voltage: 230 V, 50 Hz
Power: 2300 W / 2200 W (depending on model)
Max. load: 6 kg
Power socket: (230 V, 50 Hz, 10 A)
Water pressure: min. 0,05 MPa, max. 0,8 MPa
Fuse: 10 A
187352
1. Front panel
2. Detergent dispenser
3. Door
4. Filter lid
Cautions
•Be sure to remove transport brackets prior first use of the appliance.
Attempted operation of the blocked machine may result in irreparable
damage which is not covered by the manufacturer’s warranty!
•When connecting your washing machine to water supply, be sure to use
brand new water inlet hose and appropriate sealing gaskets (attached).
•Do not locate the machine in a room with temperature below 0°C. Parts of the
machine may be damaged if frozen.
•Install the washing machine in a perfectly horizontal position, on solid flat
concrete floor.
•Follow the instructions for correct installation and water and mains
connections.
•Never immerse the end of the drain hose into the draining water.
•Prior starting the washing cycle lock the door by pressing them at the
designed spot.
•Door may not be open during the washing cycle.
•Use only detergents and softeners for machine wash. Manufacturer may not
assume responsibility for any damage and eventual discoloring of gaskets
and plastic components as a consequence of incorrect use of bleach and/or
coloring agents.
•For removal of lime residues use such agents with added anti-corrosion
agents. Follow the manufacturer’s instructions. Finish the lime removal by
multiple rinsing to remove completely eventual acid residues.
•Never use detergents containing solvents, since there is a danger of creating
toxic gasses which may damage the machine and result in ignition or
explosion.
•Upon completion of washing operation close the water faucet.
•Before any transport block the machine by inserting at least one transport
blocking rod. Prior this operation disconnect the appliance from the mains
power!
•Rating plate with basic information is located above the opening of the
machine.
•The warranty shall not apply to consumables (bulbs), minor discoloration or
deviations of color, increased noise level as a consequence of appliance age,
which does not affect appliance functionality, and aesthetical deficiencies
which do not affect appliance functionality or safety.
187352
Before connecting the appliance read
these instructions carefully. Repairing
the failure arising from inappropriate
connections or use of the appliance is not
covered by the guarantee.
187352
The symbol on the product or on its
packaging indicates that this product
may not be treated as household waste.
Instead it shall be handed over to the
applicable collection point for the
recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which
could otherwise be caused by
inappropriate waste handling of
thisproduct. For more detailed information
about recycling of this product, please
contact your local city office, your
household waste disposal service or the
shop where you purchased the product.
Installation and connection
Package removal
In removing the wrapping be careful not to
damage the appliance with a sharp object.
Before connecting the appliance, let it
warm up to room temperature (wait for two
hours).
•Our appliances are packed in environmentally
friendly materials which may be recycled,
deposited or decomposed without any threat to
the environment.
•To this end all wrappings are marked accordingly.
Removal of transport
brackets
•Move the pipes.
•Loosen screws A at the rear of the machine (Fig. 1).
•Remove the brackets B (Fig. 1) and slide them
into the groove on the blocking rod (Fig. 2) - the
right one should be turned around.
•Use the brackets to rotate blocking rods for 90°
and pull them out.
•Close the openings with attached plastic pegs.
Save transport brackets for eventual later use.
Be sure to remove the transport brackets
prior first use, otherwise the appliance
may be permanently damaged. In such
cases the warranty conditions are void.
Fig. 2
187352
Fig. 1
Fig. 2
Leveling the appliance
•Put the appliance in horizontal position by turning
the adjustable legs.
The legs are adjustable up to +/- 1 cm.
After the adjustment tighten the nuts firmly (A)
- towards the bottom of the machine!
Vibrations, moving of the appliance and
loud operation due to incorrect setting of
the adjustable feet shall not be covered by
this warranty.
The appliance should be placed on a
surface with concrete base; the surface
should be dry and clean in order to prevent
slipping. The adjustable feet should also
be cleaned before installation.
•If you have a tumble dryer of the same
dimensions, you can place it on top of the
washing machine.
To ensure correct operation of the appliance,
water pressure inlet must be between 0,05 and
0,8 MPa.
Minimum water pressure can be established
by measuring the quantity of poured out water.
3 litres of water must be poured out from
completely opened tap in 15 seconds.
•Insert the gasket with screen into the water inlet
hose thread Screw the hose thread to the water
faucet
•In case of hot and cold water connection, connect
one hose to cold and other to hot water faucet as
marked at the rear of the appliance (letters C and
H) (C - cold; H - hot)
187352
Water inlet connection
Water outlet connection
•Fix the outlet hose to run into the sink or the
Connect the appliance
to the mains supply
•Plug the mains power cable to the wall mains
bathtub, or connect it directly to the wall drain
outlet (diameter min. 4 cm).
•Wall drain must be installed properly and must
enable occasional cleaning.
•Fasten the outlet hose support with a piece of
rope led through the hose elbow, to prevent the
hose from slipping to the floor.
The end of outlet hose should be placed between
minimum 60 cm and maximum 100 cm above the
floor level.
socket.
•Required voltage and other information are written
on the rating plate above the door opening of the
machine.
The wall socket must be accessible at all
times and must be equipped with an earth
lead (in accordance with the local safety
regulations).
The permanent connection must be fitted
by an authorized personnel only.
Damaged mains power cable may be
replaced only by the producer or his
authorized personnel.
Never plug the appliance into the electric
shaver socket or hair dryer socket. 187352
187352
Operation
A - program selector
B - Rinse hold button
C - START/PAUSE button
Washing procedure
Signal LED’s: - ON/OFF (orange)
- pump stop/failure
(green)
• Open the door of the machine
•Load the laundry into the drum
•Close the door
•Open the water inlet faucet
•Select the program
•Add washing and treatment agents (detergent and
softener)
•Start the operation by pushing the START/PAUSE
button (C)
- Open the door of the machine.
Door is opened by pulling the handle (lever) on
the right hand side of the door towards you.
- Sort the laundry by the type of fabrics.
Do the buttons and zippers, tie the strings
and pull out the pockets.
Very delicate laundry should be put in a
special protective sack.
187352
It is suggested to load the drum with items
of different sizes.
10
Pay attention to the labels on the clothes,
indicating the recommending washing mode
(see table of textile treatment symbols on the
last page of these instructions).
Program is selected by turning the program selector
(A) from the “0” position to the desired washing
program. The ON/OFF signal LED starts flashing.
The program selector (A) may be turned in both
directions, and the appropriate program selected
according to the type of laundry washed and the
required washing temperature (see Program Chart
for help). You may select basic or partial programs.
Selected program may be changed at random prior
pushing the START/PAUSE button (C).
- Selection of basic programs
Basic programs represent integral programs containing
all washing stages, including softening and spinning
(see Program Chart). They are selected by turning the
program selector to the appropriate position.
Cotton: whites/colored
Normally stained cotton and flax bed linen and
underwear, table cloth, bathroom towels, top
garments, etc.
For less stained laundry of this type, use short
program. It saves energy and washing time.
For heavily soiled cotton use the program with the
prewash.
Synthetic
Normally stained shirts, blouses and other polyester
and polyamide garments, or a mixture of these
fabrics with cotton.
For less siol laundry of this type, use short program.
It saves energy and washing time.
Delicate
This is a program for delicate fabrics (dresses,
187352
Washing machine
operation
11
skirts, blouses) and curtains.
Wool
Especially gentle program for washing wool and
garments made from mixture of other fabrics with
wool, appropriately marked for machine washing.
- Selection of additional function
Rinse hold
•This function is switched on after the selection of
a basic program by pressing the button (B). It may
also be switched on during the operation, prior
last rinse. Indicator LED above the button is on.
•The function is switched off by pressing the same
button again - signal LED is off.
•The program stops at the end of last rinse, prior
spinning: laundry remains soaked in water and
prevents crease, if you are unable to remove
it from the drum immediately after the end of
washing cycle. Indicator LED above the button is
flashing.
•The selected program is completed by pushing
the START/PAUSE button (C), but you may also
apply additional programs (drain or spin), but you
must first return the program selector to the “0”
position for at least one second, prior selecting
any of the additional programs.
When program continues, indicator LED above
the button goes off.
- Selection of partial programs
These are independent programs and may be used
when you do not need the entire washing program.
In case you would like to use more additional
programs in a sequence, you must turn off the
appliance prior any new program selection (turn the
program selector (A) to “0” for at least one second).
187352
12
Rinse
Independent program for rinsing delicate laundry,
without intermediate spinning and with short final
spin. You may use it for rinsing manually washed
delicate laundry or for extra rinsing for people with
skin sensitive to detergents.
Softener
This program is intended for softening, bleaching
or impregnating of washed laundry. It is completed
with spinning at max. 1000 RPM.
Rinse hold
Use it when the washing program was interrupted
or if drain function was engaged, and you only wish
to the water out of the drum, without spinning.
Spin
Intensive spinning for non-delicate laundry at high
spin RMP.
- Adding washing and softening agents
(see Tips for washing and energy saving)
•pre-wash compartment
•main wash compartment
•softener compartment
Washing detergent may be added directly into the
drum, using the measuring vessel.
When adding softener, be careful to fill the
dispenser only up to the marked level.
187352
Be sure to close the detergent dispenser
when opening/closing the appliance door.
13
Start the operation
•Push the START/PAUSE button (C). The ON/OFF
LED stops flashing, the machine starts operating
after a few seconds. If the door is not properly
closed after starting the operation, the ON/OFF
LED starts flashing again after a few seconds.
When you close the door, the machine initiates
the selected program.
•In case you would like to alter the washing
program after the initiated washing operation,
turn the program selector for one second to the
position “0”, followed by the selection of a new
program. Switching the machine off deletes any
previously selected additional functions - Rinse
hold, so they have to be reactivated.
- End of operation
Flashing ON/OFF LED indicates that the program
was completed.
•Extract the laundry from the drum and remove
any alien objects from the door gasket.
•Leave the door ajar to allow the interior to dry.
•Close the water inlet faucet.
•Switch the machine off by turning the program
selector to position “0”.
Interruptions
•By the user
Selecting Rinse hold function
Program is stopped when it comes to the Rinse hold
stage (if this function had been previously selected).
Drum door remains closed all the time. Indicator
LED above the rinse hold function starts flashing.
Washing procedure is continued by pressing the
START/PAUSE button (C).
187352
Own interruption
You may also stop the program by turning the
program selector to the position “0”. If there is water
in the drum select one of additional programs (drain,
14
spin) to empty the water and terminate the program.
Pause button
By pressing the START/PAUSE button (C) program
may be suspended at any time. After certain time you
may open the door if there is no water in the drum,
otherwise this is not possible. Program is continued
by pressing the START/PAUSE button (C).
•Failures
Program is suspended in case a failure occurs.
Signal LED’s are flashing (see cf. Troubleshooting).
•Power failure
At electric cutout the program is interrupted,
however, after the power supply has been reestablished, the program operation automatically
proceeds.
187352
If a power failure occurs when the drum is
still full of water, be careful not to open the
door before you pump the water out.
15
Tips for washing and energy saving
•Before washing sort out the laundry according to
the type, degree of dirtiness and color fastness.
•Prior selecting the washing program consult the
sewn tab with information on a particular piece
of laundry (see Maintenance chart on the last
page).
•Wash separately the new colored textile products
for the first time.
•Wash heavily soiled laundry in small quantities or
add more detergent.
•Treat stubborn stains with special stain remover, it
will save energy.
•With lightly stained laundry select washing
program without pre-wash, use short program and
select lower washing temperature. This way you
may save up to 50% of energy.
•Avoid washing too little quantities of laundry
because of energy saving and for better
performances of the appliance.
•The largest allowed quantity of dry laundry is
indicated in the Program chart.
•Before washing empty the pockets, close zip
fasteners, and remove any metal fasteners or
badges that might clog the drain or damage the
laundry or drum interior.
•Loosen the stacked laundry prior inserting it into
the drum.
•Use only detergents for machine wash.
•Add powder or liquid detergents according to the
manufacturer’s instructions.
•If water hardness level exceeds 14°dH degrees,
the use of water softeneris required.
•Chlorine-based whitening agents are not
recommended, as it can damage the heater.
187352
16
Hardness
scale
Degree of hardness
°dH(°N)
m mol/l
°fH(°F)
p.p.m.
0-7
0-1,3
0-12
0-120
2 - Medium
7-14
1,3-2,5
12-25
120-250
3 - Hard
14-21
2,5-3,8
25-37
250-370
>21
>3,8
>37
>370
1 - Soft
4 - Extra hard
In case of hard water add detergent according to the Chart for
degree 1 and add appropriate quantity of water softener (see
manufacturer’s instructions).
• If you do not apply the program which includes
the pre-wash feature, you may add washing
detergent directly into the drum.
•If you use thick liquid softener it is recommended
to dilute it with water, to prevent clogging of
dispenser compartment ducts.
•Washing machine is equipped with the dispenser
partition gate, so you may pour liquid detergent
also into the central compartment. If you use
powder detergent the gate is lifted up, and in case
of liquid detergent it is slid down.
•Liquid detergents are intended for main wash
only, without pre-wash.
•Insert particularly delicate linen (stockings,
delicate female underwear, etc.) into the special
bag.
• High spin RPM leave less moisture in laundry
which dries out much quicker in the tumble dryer,
thereby saving energy.
187352
Do not put clods of detergent into the
soap dispenser as the tube in the washing
machine may clog.
17
Cleaning and maintenance
Disconnect the washing machine from the
mains before cleaning!
•The casing should be cleaned with soft cloth and
mild detergent.
•The interior of the drum and the door gasket is
cleaned by washing at 60°C without laundry and
adding half quantity of detergent.
•If necessary, clean the detergent dispenser. Pull it
out from its casing completely by pressing the flap
(see Fig.).
•If necessary, clean the cover of the bung under
the running water.
187352
18
•Wash it under running water using a brush, and
dry it. Remove any leftover dried detergent from
the bottom of the casing.
•Clean the entire rinsing area of the washing
machine with a brush, especially the nozzles on
the upper side of the rinsing chamber.
•Clean frequently the water inlet hose screen
under running water.
•After each wash wipe the door rubber gasket. This
will prolong its useful life.
•Open the filter lid using flat screwdriver or similar
tool.
•Filter needs occasional cleaning, especially
187352
following heavily shaggy or old laundry. Before
cleaning, drain any water from the machine via
drain pipe.
19
•Turn it anti-clockwise, pull it out and clean under
running water.
•Insert the filter back as shown on the picture
(arrow and pointer), and tighten by turning it in
clockwise direction. To ensure good sealing the
gasket surface (A) must be dirt free.
187352
20
Failures
The washing machine automatically monitors the execution of particular
functions during the operation, and reports any detected failures. In such
cases both signal LED’s start flashing in certain sequence. Flashing sequence
changes in accordance with the nature of the detected failure.
In some cases you may attempt removing certain failures yourself, so count the
number of flashes, repeating after certain pauses.
The machine signals failures immediately after detecting them and stops the
program, except for heater failure, where the machine completes the washing
program without heating water.
Failures:
In certain cases you may remove the failure yourself:
2 - two flashes: door is not correctly closed;
3 - three flashes: inappropriate water intake;
7 - seven flashes: inappropriate water outlet.
In all other instances mark the number of flashes indicating the failure, switch
off the machine and call nearest authorized service center (LED’s continue
flashing until you switch the machine off).
Interferences from the ambient (for example electrical wiring) could induce
signalization of different faults. In such cases:
- switch the appliance off, and wait for a few seconds;
- switch the appliance back on and repeat the washing program.
If the fault repeats, call authorized service shop.
187352
Warranty shall not apply in case of failures due to interferences from the
environment (lightning stroke, power supply circuit faults, natural disasters).
21
Failure
Possible cause
Remedy
The machine does not
work (symbols are not
illuminated).
Machine is not powered.
Check if:
• power in the socket,
• the fuse is OK,
• plug is in the socket.
Washing program
does not start (ON/
OFF LED is flashing).
Door is not properly closed.
Push it towards the machine.
Water does not enter the
machine (after approx. 8
min the machine reports
failure -3 flashes).
Disturbed water inlet.
Check if:
•the water faucet is open,
•inlet pipe net filter is clean.
Push the START/PAUSE button.
Water is leaking from
the machine.
Filter is not tightly screwed in.
Inlet pipe is not tightly screwed to
the machine or to the water faucet.
Outlet pipe fell to the floor.
Tighten the filter properly.
Tighten the inlet pipe.
The machine moves
during operation.
The machine is not properly
leveled.
Transport brackets are not
removed.
Level the machine with the adjustable
legs.
Remove transport brackets.
The machine vibrates
during the spin.
Unevenly distributed laundry,
especially with very small
quantities (for ex. only the
bathrobe).
This is normal, the machine will
reduce the RPM if vibrations are too
strong.
Wash larger quantity of laundry.
Excessive foaming
during washing.
Excessive measure of detergent.
Use washing powder according to
the instructions by the producer and
according to the water hardness and
soiled laundry. Use only detergents
for machine washing.
Water is poorly
pumped out or not at
all (machine reports
failure - seven flashes
of LED).
Water outlet is clogged.
Check if:
• the filter is clean,
• outlet pipe is not jammed,
• outlet pipe is positioned higher than
1m.
Push START/PAUSE again.
Laundry is not
properly spun.
No failure is reported.
The machine switched on the
UKS function. Because of bad
laundry balance, the machine
has automatically reduced spin
RPM.
The machine operates normally.
Wash large and small pieces of
laundry together.
Greasy wads appear
on the laundry.
Too little detergent (laundry was
very greasy).
Wash the laundry again.
Add more detergent for such soiled
laundry, or use liquid detergent.
187352
22
Affix the outlet pipe to the drain.
Failure
Possible cause
Remedy
Laundry is stained
after washing.
You used liquid detergent or
detergent for colored laundry
which does not contain whitener.
Use the detergent containing
whitener.
White powdery
residues on the
laundry.
It is not the consequence of bad
rinsing, but because of neophosphate detergents containing
non soluble components
(zeolites) for water softening.
Such substances may be
deposited upon the laundry.
Immediately rinse the laundry once
again.
•Use liquid detergents which do not
contain zeolites.
•Try removing the residues with the
brush.
Detergent residues in
the dispenser.
Low water flow pressure.
Some detergents may stick to
the dispenser rather hard if it is
wet.
•Clean the inlet pipe filter net.
•In case of low water pressure
increase water level.
• Wipe the dispenser prior loading
detergent.
Softener is not
completely rinsed,
or water is left in the
dispenser dish.
Sucking cover is not correctly
positioned or is clogged.
Clean the dispenser and firmly fix the
cover to its place.
Washing time is
longer than usual.
•The machine switched on
the UKS* system because of
uneven laundry load.
•Power failure occurred.
•Washing program time may be
prolonged for 10 minutes and the
machine still functions perfectly.
Time is prolonged for the power
failure period.
* UKS: universal stability control - this function prevents excessive vibrations during spinning.
187352
In case you were not successful in repairing the
malfunctions in spite of the above suggestion chart,
call the nearest authorized service shop.
Repairing the failure arising from inappropriate
connections or use of the appliance is not covered
by the guarantee, and the repair expenses are paid
by the customer.
23
Tables
Program chart
- 6 kg
Cotton - color
6
60
Cotton + prewash
6
60
Cotton
6
40
1200
RPM
RPM
Additional function
Rinse hold
Energy cons.
kWh
400 - 1300
95
Water cons.
l
1000 - 1300
6
139
58
2,10

Duration (min.)
Temp. (°C)
Cotton - white
Spin (RPM)
Max. load (kg)
Basic program
140
52
165
60
1,34

116
52
0,66

1,14

Cotton - quick wash
6
40
72
52
0,55

Synthetic
3
60
111
43
0,93

Synthetic
3
40
100
40
0,52

Synthetic - quick wash
1000
3
40
49
40
0,47

Delicate
2,5
40
59
58
0,45

Delicate
2,5
30
53
58
0,36

2
30
600
46
42
0,20

Wool
700
Partial programs
Rinse
3
700
25
40
0,02
Softener
6
1000
15
16
0,02
Drain
6
-
2
Spin
6
1300
12
 possible
187352
24
0,03
Maintenance chart
Normal wash
Delicate wash
Whitening
Max.
washing
temp. 95°C
Max.
washing
temp.
40°C
Max.
washing
temp.
60°C
Whitening in cold water
Max.
washing
temp.
30°C
Manual
washing
Washing
not
allowed
Whitening not allowed
Ironing
Hot iron max.
200°C
Hot iron max.
150°C
Hot iron max.
110°C
Ironing not
allowed
Dry cleaning
Dry cleaning in all
solvents
Perchlorinetyhlene
R11, R113,
Kerosene
Dry cleaning in
kerosene, in pure
alcohol and in
R 113
Dry cleaning not
allowed
Place on
flat surface
Hang wet
Hang
Low
temperature
Tumble drying
not allowed
187352
Drying
High
temperature
25
187352
26