Acer 7320 Laptop User`s guide

Add to my manuals
79 Pages

advertisement

Acer 7320 Laptop User`s guide | Manualzz
740-e.book Page i Monday, July 23, 2001 3:40 PM
TravelMate 740 series
User’s guide
740-e.book Page ii Monday, July 23, 2001 3:40 PM
Copyright © 2001. Acer Incorporated.
All Rights Reserved.
TravelMate 740 series User’s guide
Original Issue: July 2001
Changes may be made periodically to the information in this publication without obligation
to notify any person of such revision or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.
Record the model number, serial number, purchase date, and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your computer. All correspondence concerning your unit should include the serial
number, model number, and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronic, mechanical, photocopy, recording, or otherwise,
without the prior written permission of Acer Incorporated.
TravelMate 740 series Notebook computer
Model number : _________________________________
Serial number: ___________________________________
Purchase date: ___________________________________
Place of purchase: ________________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other company's
product names or trademarks are used herein for identification purposes only and belong to
their respective companies.
740-e.book Page iii Monday, July 23, 2001 3:40 PM
iii
First things first
We would like to thank you for making the TravelMate series of
notebook computers your choice for your mobile computing needs.
We hope you will be happy with your TravelMate as much as we
enjoyed making it for you.
Your guides
To help you use your TravelMate, we have designed a set of guides:
First off, the Just for Starters... poster helps you get
started with setting up your computer.
This User’s guide introduces you to the many ways your
computer can help you be more productive. This guide
provides clear and concise information about the computer,
so read it thoroughly.
If you ever need to print out a copy, this User’s guide is also
available in PDF (Portable Document Format). Follow these
steps:
1 Click on Start, Programs, TravelMate.
2 Click on TravelMate User’s guide.
Note: Viewing the file requires Adobe Acrobat Reader
installed. If Adobe Acrobat Reader is not installed on your
computer, clicking on TravelMate User’s guide will run the
Acrobat Reader setup program first. Follow the
instructions on the screen to complete the installation. For
instructions on how to use Adobe Acrobat Reader, access
the Help menu.
A handy Hot key pocket reference card is useful for quick
glances at functional key combinations.
740-e.book Page iv Monday, July 23, 2001 3:40 PM
iv
An Online guide is your helping hand on-the-go, with easy
to access, detailed and linked information about your
computer.
To access the online guide:
1 Click on Start, Programs, TravelMate.
2 Click on TravelMate Online guide.
Lastly, there may be a Read me first sheet along with
other documents included with your package which
contain important reminders and updates. So, please read
through it.
For more information about our products, services, and support
information, please visit our Web site (global.acer.com).
Basic care and tips for using your computer
Turning your computer on and off
To turn on the computer, simply slide and then release the power
switch on the left side of your TravelMate. See “Left view” on page 4
for the location of the power switch.
To turn the power off, do any of the following:
•
Use the Windows Shut Down... command
Click on Start, Shut Down..., and select Shut down; then click on
OK.
•
Use the power switch
Note: You can also use the power switch to perform power
management functions. See “Power management” on page 23.
•
Use the customized functions for power management
You can also shut down the computer by closing the display cover,
or by pressing the sleep hot key (Fn-F4). See “Power
management” on page 23.
740-e.book Page v Monday, July 23, 2001 3:40 PM
v
Note: If you cannot power off the computer normally, press and
hold the power switch for more than four seconds to shut down
the computer. If you turn off the computer and want to turn it on
again, wait at least two seconds before powering up.
Taking care of your computer
Your computer will serve you well if you take care of it.
•
Do not expose the computer to direct sunlight. Do not place it
near sources of heat, such as a radiator.
•
Do not expose the computer to temperatures below 0[C (32[F) or
above 50[C (122[F).
•
Do not subject the computer to magnetic fields.
•
Do not expose the computer to rain or moisture.
•
Do not spill water or any liquid on the computer.
•
Do not subject the computer to heavy shock and vibration.
•
Do not expose the computer to dust and dirt.
•
Never place objects on top of the computer to avoid damaging the
computer.
•
Do not slam the computer display when you close it.
•
Never place the computer on uneven surfaces.
Taking care of your AC adapter
Here are some ways to take care of your AC adapter:
•
Do not connect the adapter to any other device.
•
Do not step on the power cord or place heavy objects on top of it.
Carefully route the power cord and any cables away from personal
traffic.
•
When unplugging the power cord, do not pull on the cord itself
but pull on the plug.
•
The total ampere ratings of the equipment plugged in should not
exceed the ampere rating of the cord if you are using an extension
cord. Also, the total current rating of all equipment plugged into
a single wall outlet should not exceed the fuse rating.
740-e.book Page vi Monday, July 23, 2001 3:40 PM
vi
Taking care of your battery pack
Here are some ways to take care of your battery pack:
•
Use only batteries of the same kind as replacements. Turn the
power off before removing or replacing batteries.
•
Do not tamper with batteries. Keep them away from children.
•
Dispose of used batteries according to local regulations. Recycle if
at all possible.
Cleaning and servicing
When cleaning the computer, follow these steps:
1
Power off the computer and remove the battery pack.
2
Disconnect the AC adapter.
3
Use a soft cloth moistened with water. Do not use liquid or
aerosol cleaners.
4
To clean the display screen, use an LCD cleaning kit.
If any of the following occurs:
•
The computer has been dropped or the body has been damaged.
•
Liquid has been spilled into the product.
•
The computer does not operate normally.
Please refer to "Troubleshooting my computer" on page 43.
First things first
Your guides
Basic care and tips for using your computer
iii
iii
iv
1 Getting to know your TravelMate
1
A TravelMate tour
Front view
Left view
Right view
Rear view
Bottom view
Features
Indicators
Using the keyboard
Special keys
Touchpad
Touchpad basics
Storage
Hard disk
AcerMedia drive
Using software
Audio
Adjusting the volume
Power management
Moving around with your TravelMate
Disconnecting from the desktop
Moving around
Taking the computer home
Traveling with the computer
Traveling internationally with the computer
Securing your computer
Using the fingerprint recognition sensor
Using a computer security lock
Using passwords
2 Customizing my computer
Expanding through options
Connectivity options
Upgrade options
Using system utilities
Notebook Manager
BIOS Utility
3
3
4
5
6
8
9
11
12
12
18
18
20
20
20
21
22
22
23
24
24
24
25
27
27
29
29
30
30
33
35
35
39
41
41
41
Contents
740-e.book Page vii Monday, July 23, 2001 3:40 PM
740-e.book Page viii Monday, July 23, 2001 3:40 PM
viii
3 Troubleshooting my computer
Frequently-asked questions
Troubleshooting tips
Error messages
Requesting service
International Traveler’s Warranty (ITW)
Before you call
43
45
49
50
52
52
52
Appendix A Specifications
55
Appendix B Notices
61
Index
69
740-e.book Page 1 Monday, July 23, 2001 3:40 PM
1 Getting to know your
TravelMate
740-e.book Page 2 Monday, July 23, 2001 3:40 PM
Your TravelMate computer combines highperformance, versatility, power management
features and multimedia capabilities with a
unique style and ergonomic design. Work
with unmatched productivity and reliability
with your new power computing partner.
740-e.book Page 3 Monday, July 23, 2001 3:40 PM
3
A TravelMate tour
After setting up your computer as illustrated in the Just for
Starters... poster, let us show you around your new TravelMate
computer.
Front view
#
Item
Description
1
Display screen
Also called LCD (liquid-crystal display),
displays computer output.
2
Touchpad
Touch-sensitive pointing device which
functions like a computer mouse.
3
Click buttons (left,
center and right)
The left and right buttons function like the
left and right mouse buttons; the center
button serves as a scroll up/down button.
4
Palmrest
Comfortable support area for your hands
when you use the computer.
740-e.book Page 4 Monday, July 23, 2001 3:40 PM
4
1 Getting to know your TravelMate
#
Item
Description
5
Fingerprint
recognition sensor
Identifies the authorized fingerprint, in
order for the user to gain access to the
computer.
6
Keyboard
Inputs data into your computer.
7
Status indicators
LEDs (light-emitting diode) that turn on and
off to show the status of the computer, its
functions and components.
Left view
#
Item
Description
1
Infrared port
Interfaces with infrared devices (e.g.,
infrared printer, IR-aware computer).
2
PC Card slots
Accept one Type III or two Type II 16-bit PC
Card(s) or 32-bit CardBus PC Card(s).
3
Eject buttons
Eject the selected PC Card from the slot.
4
Power switch
Turns on the computer power.
5
Floppy activity
indicator
LED that turns on and off when the floppy
drive is active.
740-e.book Page 5 Monday, July 23, 2001 3:40 PM
5
#
Item
Description
6
Speaker/
Headphone-out jack
Connects to audio line-out devices (e.g.,
speakers, headphones).
7
Line-in jack
Accepts audio line-in devices (e.g., audio CD
player, stereo walkman).
8
Microphone-in jack
Accepts a mono/stereo condenser
microphone.
9
Volume control
Controls the volume of the speakers.
10
Floppy drive
Internal diskette drive, accepts 3.5-inch
floppy diskettes.
11
Floppy disk eject
button
Push this button to eject the floppy disk.
12
Video capture kit
slot
Accepts the video capture kit option on the
left side of the computer.
Right view
#
Item
Description
1
Video capture kit
slot
Accepts the video capture kit option on the
right side of the computer.
740-e.book Page 6 Monday, July 23, 2001 3:40 PM
6
1 Getting to know your TravelMate
#
Item
Description
2
Battery bay
Houses the computer's battery pack.
3
AcerMedia drive
Houses a removable media drive module.
4
AcerMedia indicator
Lights up when the AcerMedia drive is active.
5
Eject button
Ejects the drive tray.
6
Emergency eject slot
Ejects the drive tray when the computer is
turned off. See page 46 for more details.
7
Security keylock
Connects to a Kensington-compatible
computer security lock.
Rear view
#
Item
Description
1
Power jack
Connects to an AC adapter.
2
PS/2 port
Connects to any PS/2-compatible device (e.g.,
PS/2 mouse).
3
Modem jack
Connects to a phone line.
740-e.book Page 7 Monday, July 23, 2001 3:40 PM
7
#
Item
Description
4
Serial port
Connects to a serial device (e.g., serial
mouse).
5
Parallel port
Connects to a parallel device (e.g., parallel
printer).
6
Network jack
Connects to an Ethernet 10/100-based
network
7
External display
port
Connects to a display device (e.g., external
monitor, LCD projector) and displays up to
64K colors at 1280x1024 resolution.
8
USB ports (two)
Connect to Universal Serial Bus devices (e.g.,
USB mouse, USB camera).
740-e.book Page 8 Monday, July 23, 2001 3:40 PM
8
1 Getting to know your TravelMate
Bottom view
#
Item
Description
1
AcerMedia bay
Houses an AcerMedia drive module.
2
Battery bay
Houses the computer's battery pack.
3
Hard disk bay
Houses the computer's hard disk (secured
by a screw).
4
Battery release latch
Unlatches the battery to remove the
battery pack.
5
Memory
compartment
Houses the computer's main memory.
6
Mini docking
connector
Connects to DockMate V mini docking
station.
7
AcerMedia bay
release latch
Unlatches the AcerMedia drive for
removal or swapping.
740-e.book Page 9 Monday, July 23, 2001 3:40 PM
9
Features
Below is a brief summary of the computer’s many features:
Performance
•
Intel® Pentium® III processor-M with 512 KB level 2 cache and
Intel® SpeedStep™ technology support
•
64-bit memory bus
•
AcerMedia bay (removable DVD drive or DVD/CD-RW combo drive)
•
Built-in floppy drive
•
High-capacity, Enhanced-IDE hard disk
•
Li-Ion main battery pack
•
Power management system with ACPI (Advanced Configuration
Power Interface)
Display
•
15" Thin-Film Transistor (TFT) Super eXtended Graphics Array +
(SXGA+) liquid crystal-display (LCD)
•
3D capabilities
•
Simultaneous LCD and CRT display support
•
Supports other output display devices such as LCD projection
panels for large-audience presentations
•
"Automatic LCD dim" feature that automatically decides the best
settings for your display and conserves power
•
Dual display capability
Multimedia
•
16-bit high-fidelity AC’97 stereo audio with 3D sound and
wavetable synthesizer
•
Built-in dual speakers
•
Built-in microphone
•
High-speed optical drive (AcerMedia bay)
•
External USB video capture kit option
740-e.book Page 10 Monday, July 23, 2001 3:40 PM
10
1 Getting to know your TravelMate
Connectivity
•
High-speed fax/data modem port
•
Fast infrared wireless communication
•
USB (Universal Serial Bus) ports
•
Ethernet/Fast Ethernet port
•
Optional Bluetooth wireless communication feature
•
Optional InviLink 802.11b wireless LAN
Human-centric design and ergonomics
•
Internet scroll key
•
Sleek, smooth and stylish design
•
Full-sized keyboard
•
Ergonomically-centered touchpad pointing device
Expansion
•
Two type II or one type III CardBus PC Card slot(s)
•
Upgradeable memory
•
DockMate V
740-e.book Page 11 Monday, July 23, 2001 3:40 PM
11
Indicators
The computer has six easy-to-read status icons below the display
screen.
The Power and Sleep status icons are visible even when you close the
display cover so you can see the status of the computer while the cover
is closed.
Icon
Function
Description
Power
Lights when the computer is on.
Sleep
Lights when the computer enters Standby mode
and blinks when it enters into or resumes from
hibernation mode.
Media Activity
Lights when the floppy drive, hard disk or
AcerMedia drive is active.
Battery Charge
Lights when the battery is being charged.
Caps Lock
Lights when Caps Lock is activated.
Num Lock
Lights when Num Lock is activated.
740-e.book Page 12 Monday, July 23, 2001 3:40 PM
12
1 Getting to know your TravelMate
Using the keyboard
The full-sized keyboard includes an embedded numeric keypad,
separate cursor keys, two Windows keys and twelve function keys.
Special keys
Lock keys
The keyboard has three lock keys which you can toggle on and off.
Lock key
Description
Caps Lock
When Caps Lock is on, all alphabetic characters typed are in
uppercase.
Num Lock
(Fn-F11)
When Num Lock is on, the embedded keypad is in numeric
mode. The keys function as a calculator (complete with the
arithmetic operators +, -, *, and /). Use this mode when you
need to do a lot of numeric data entry. A better solution
would be to connect an external keypad.
Scroll Lock
(Fn-F12)
When Scroll Lock is on, the screen moves one line up or down
when you press the up or down arrow keys respectively.
Scroll Lock does not work with some applications.
740-e.book Page 13 Monday, July 23, 2001 3:40 PM
13
Embedded numeric keypad
The embedded numeric keypad functions like a desktop numeric
keypad. It is indicated by small characters located on the upper right
corner of the keycaps. To simplify the keyboard legend, cursor-control
key symbols are not printed on the keys.
Desired access
Num lock on
Num lock off
Number keys on
embedded keypad
Type numbers in a normal
manner.
Cursor-control keys
on embedded
keypad
Hold Shift while using
cursor-control keys.
Hold Fn while using
cursor-control keys.
Main keyboard keys
Hold Fn while typing letters
on embedded keypad.
Type the letters in a
normal manner.
Note: If an external keyboard or keypad is connected to the
computer, the Num Lock feature automatically shifts from the
internal keyboard to the external keyboard or keypad.
740-e.book Page 14 Monday, July 23, 2001 3:40 PM
14
1 Getting to know your TravelMate
Windows keys
The keyboard has two keys that perform Windows-specific functions.
Key
Description
Windows logo
key
Start button. Combinations with this key perform
shortcut functions. Below are a few examples:
á
á + Tab (Activates next taskbar button)
á + E (Explores My Computer)
á + F (Finds Document)
á + M (Minimizes All)
Shift + á + M (Undoes Minimize All)
á + R (Displays the Run... dialog box)
Application key
Opens a context menu (same as a right-click).
Hot keys
The computer employs hot keys or key combinations to access most of
the computer’s controls like screen brightness, volume output and the
BIOS Utility.
740-e.book Page 15 Monday, July 23, 2001 3:40 PM
15
To activate hot keys, press and hold the Fn key before pressing the
other key in the hot key combination.
Hot key
Icon
Function
Description
Fn-F1
Hot key help
Displays help on hot keys.
Fn-F2
Setup
Accesses the computer’s
configuration utility.
Fn-F3
Power
management
scheme toggle
Switches the power
management scheme used by
the computer (function
available if supported by
operating system).
See “Power management” on
page 23.
Fn-F4
Sleep
Puts the computer in Sleep
mode.
See “Power management” on
page 23.
Fn-F5
Display toggle
Switches display output
between the display screen,
external monitor (if
connected) and both the
display screen and external
monitor.
Fn-F6
Screen blank
Turns the display screen
backlight off to save power.
Press any key to return.
740-e.book Page 16 Monday, July 23, 2001 3:40 PM
16
1 Getting to know your TravelMate
Hot key
Icon
Function
Description
Fn-F7
Touchpad Toggle
Turns the internal touchpad
on and off.
Fn-F8
Speaker Toggle
Turns the speakers on and off.
Fn-→
Brightness up
Increases the screen
brightness.
Fn-←
Brightness down
Decreases the screen
brightness.
Alt Gr-Euro
Euro
Types the Euro symbol.
The Euro symbol
If your keyboard layout is set to United States-International or United
Kingdom or if you have a keyboard with a European layout, you can
type the Euro symbol on your keyboard.
Note for US keyboard users: The keyboard layout is set when
you first set up Windows. For the Euro symbol to work, the
keyboard layout has to be set to United States-International.
To verify the keyboard type:
1
Click on Start, Settings, Control Panel.
2
Double-click on Keyboard.
3
Click on the Language tab.
4
Verify that the keyboard layout used for "En English (United
States)" is set to United States-International.
If not, select and click on Properties; then select United StatesInternational and click on OK.
5
Click on OK.
To type the Euro symbol:
1
Locate the Euro symbol on your keyboard.
740-e.book Page 17 Monday, July 23, 2001 3:40 PM
17
2
Open a text editor or word processor.
3
Hold Alt Gr and press the Euro symbol.
Note: Some fonts and software do not support the Euro symbol.
Please refer to (www.microsoft.com/typography/faq/faq12.htm)
for more information.
740-e.book Page 18 Monday, July 23, 2001 3:40 PM
18
1 Getting to know your TravelMate
Touchpad
The built-in touchpad is a PS/2-compatible pointing device that senses
movement on its surface. This means the cursor responds as you move
your finger on the surface of the touchpad. The central location on
the palmrest provides optimum comfort and support.
Note: When using an external USB or serial mouse, you can press
Fn-F7 to disable the touchpad. If you are using an external PS/2
mouse, the touchpad is automatically disabled.
Touchpad basics
The following items teach you how to use the touchpad:
•
Move your finger across the touchpad to move the cursor.
•
Press the left (1) and right (3) buttons located on the edge of the
touchpad to do selection and execution functions. These two
buttons are similar to the left and right buttons on a mouse.
Tapping on the touchpad produces similar results.
•
Use the center (2) button (top and bottom) to scroll up or down a
page. This button mimics your cursor pressing on the right scroll
bar of Windows applications.
740-e.book Page 19 Monday, July 23, 2001 3:40 PM
19
Right
button
Center
buttons
Function
Left button
Execute
Click twice
quickly
Tap twice (at the
same speed as
double-clicking a
mouse button)
Select
Click once
Tap once
Drag
Click and
hold, then
use finger to
drag the
cursor on the
touchpad
Tap twice (at the
same speed as
double-clicking a
mouse button) then
hold finger to the
touchpad on the
second tap and drag
the cursor
Access
context
menu
Scroll
Tap
Click
once
Click
and
hold the
up/
down
button
Note: Keep your fingers dry and clean when using the touchpad.
Also keep the touchpad dry and clean. The touchpad is sensitive
to finger movements. Hence, the lighter the touch, the better the
response. Tapping harder will not increase the touchpad’s
responsiveness.
740-e.book Page 20 Monday, July 23, 2001 3:40 PM
20
1 Getting to know your TravelMate
Storage
This computer supplies you with the following media storage:
•
High-capacity Enhanced-IDE hard disk
•
AcerMedia drive
•
Floppy drive
Hard disk
The high-capacity hard disk is the answer to your storage needs. This is
where your programs and data are stored.
AcerMedia drive
The AcerMedia bay accepts a wide variety of media drive modules for
use with your computer. These include:
•
DVD-ROM drive
•
DVD/CD-RW drive (optional)
Ejecting the optical drive tray
To eject the optical drive tray when the computer is turned on, press
the drive eject button.
When the power is off, you can eject the drive tray using the
emergency eject hole. See page 46.
740-e.book Page 21 Monday, July 23, 2001 3:40 PM
21
Using software
Playing DVD movies
When the DVD-ROM drive module is installed in the AcerMedia bay,
you can play DVD movies on your computer.
1
Eject the DVD tray and insert a DVD movie disc; then close the DVD
tray.
Important! When you launch the DVD player for the first time,
the program asks you to input the region code. DVD discs are
divided into 6 regions. Once your DVD drive is set to a region
code, it will play DVD discs of that region only. You can set the
region code a maximum of five times (including the first time),
after which the last region code set will remain permanent.
Recovering your hard disk does not reset the number of times the
region code has been set. Refer to the table later in this section
for DVD movie region code information.
2
The DVD movie will automatically play after a few seconds.
Region code
Country or region
1
U.S.A., Canada
2
Europe, Middle East, South Africa, Japan
3
Southeast Asia, Taiwan, Korea (South)
4
Latin America, Australia, New Zealand
5
Former U.S.S.R., parts of Africa, India
6
People's Republic of China
Note: To change the region code, insert a DVD movie of a
different region into the DVD-ROM drive. Please refer to the
online help for more information.
740-e.book Page 22 Monday, July 23, 2001 3:40 PM
22
1 Getting to know your TravelMate
Audio
The computer comes with 16-bit high-fidelity AC’97 stereo audio. The
built-in sensitive microphone and dual stereo speakers are easy to
access.
There are audio ports on the left side of the computer. See “Left view”
on page 4 for more information on external audio devices.
Adjusting the volume
Adjusting the volume on the computer is easy with a rotary volume
control knob on the left panel. Turn the knob to the left to increase
the volume; turn it to the right to decrease the volume.
740-e.book Page 23 Monday, July 23, 2001 3:40 PM
23
Power management
This computer has a built-in power management unit that monitors
system activity. System activity refers to any activity involving one or
more of the following devices: keyboard, mouse, floppy drive, hard
disk, peripherals connected to the serial and parallel ports, and video
memory. If no activity is detected for a period of time (called an
inactivity timeout), the computer stops some or all of these devices in
order to conserve energy.
This computer employs a power management scheme that supports
ACPI (Advanced Configuration and Power Interface), which allows for
maximum power conservation and maximum performance at the same
time. Windows handles all power-saving chores for your computer.
Refer to your online guide for more information.
740-e.book Page 24 Monday, July 23, 2001 3:40 PM
24
1 Getting to know your TravelMate
Moving around with your TravelMate
This section gives you tips and hints to consider when moving around
or traveling with your computer.
Disconnecting from the desktop
Follow these steps to disconnect your computer from external
accessories:
1
Save your work in progress.
2
Remove any media, diskette or compact disc, from the drive(s).
3
Shut down the computer.
4
Close the display cover.
5
Disconnect the cord from the AC adapter.
6
Disconnect the keyboard, pointing device, printer, external
monitor, and other external devices.
7
Disconnect the Kensington lock if you are using one to secure the
computer.
Moving around
“when you are just moving within short distances, for example, from
your office desk to a meeting room”
Preparing the computer
Before moving the computer, close and latch the display cover to place
it in Sleep mode. You can now safely take the computer anywhere you
go within the building. To bring the computer out of Sleep mode,
open the display.
If you are taking the computer to a client's office or a different
building, you may choose to shut down the computer:
1
Click on Start, Shut Down....
2
Select Shut down and click on OK.
- or -
740-e.book Page 25 Monday, July 23, 2001 3:40 PM
25
you can put the computer in Sleep mode by pressing Fn-F4. Then close
and latch the display.
When you are ready to use the computer again, unlatch and open the
display, and press any key. If the power indicator is off, the computer
has entered Hibernation mode and turned off. Slide and release the
power switch to turn the computer back on. Note that the computer
may enter Hibernation mode after a period of time it is in Sleep mode.
Turn the power on to wake up the computer from Hibernation mode.
What to bring to short meetings
A fully charged battery runs the computer for about 3 hours under
most circumstances. If your meeting is shorter than that, you probably
do not need to bring anything with you other than the computer.
What to bring to long meetings
If your meeting will last longer than 3 hours or if your battery is not
fully charged, you may want to bring the AC adapter with you to plug
in your computer in the meeting room.
If the meeting room does not have an electrical outlet, reduce the
drain on the battery by putting the computer in Sleep mode. Press FnF4 or close the display cover whenever you are not actively using the
computer. Then tap any key or open the display to resume.
Taking the computer home
“when you are moving from your office to your home or vice versa”
Preparing the computer
After disconnecting the computer from your desktop, follow these
steps to prepare the computer for the trip home:
•
Check if you have removed all media, diskettes and compact discs,
from the drive(s). Failure to remove the media can damage the
drive head.
•
Pack the computer in a protective case that can prevent the
computer from sliding around and cushion it if it should fall.
740-e.book Page 26 Monday, July 23, 2001 3:40 PM
26
1 Getting to know your TravelMate
Caution: Avoid packing items next to the top cover of the
computer. Pressure against the top cover can damage the screen
What to bring with you
Unless you already have some items at home, bring the following items
with you:
•
AC adapter and power cord
•
The printed user’s guide
•
AcerMedia drive module(s)
Special considerations
Follow these guidelines to protect your computer while traveling to
and from work:
•
Minimize the effect of temperature changes by keeping the
computer with you.
•
If you need to stop for an extended period of time and cannot
bring the computer with you, leave the computer in the trunk of
the car to avoid exposing the computer to excessive heat.
•
Changes in temperature and humidity can cause condensation.
Allow the computer to return to room temperature, and inspect
the screen for condensation before turning on the computer. If
the temperature change is greater than 18°F (10°C), allow the
computer to come to room temperature slowly. If possible, leave
the computer for 30 minutes in an environment with a
temperature between outside and room temperature.
Setting up a home office
If you frequently work on your computer at home, you may want to
purchase a second AC adapter for use at home. With a second AC
adapter, you can avoid transporting the extra weight to and from
home.
If you use your computer at home for significant periods of time, you
might also want to add an external keyboard, monitor, or mouse.
740-e.book Page 27 Monday, July 23, 2001 3:40 PM
27
Traveling with the computer
“when you are moving within a larger distance, for instance, from your
office building to a client’s office building or traveling locally”
Preparing the computer
Prepare the computer as if you were taking it home. Make sure that
the battery in the computer is charged. Airport security may require
you to turn on your computer when bringing it into the gate area.
What to bring with you
Bring the following items with you:
•
AC adapter
•
Spare, fully-charged battery pack(s)
•
Additional printer driver files if you plan to use another printer
Special considerations
In addition to the guidelines for taking the computer home, follow
these guidelines to protect your computer while traveling:
•
Always take the computer as carry-on luggage.
•
If possible, have the computer inspected by hand. Airport security
X-ray machines are safe, but do not put the computer through a
metal detector.
•
Avoid exposing floppy disks to hand-held metal detectors.
Traveling internationally with the computer
“when you are moving from country to country”
Preparing the computer
Prepare the computer as you would normally prepare it for traveling.
What to bring with you
Bring the following items with you:
740-e.book Page 28 Monday, July 23, 2001 3:40 PM
28
1 Getting to know your TravelMate
•
AC adapter
•
Power cords that are appropriate for the country to which you are
traveling
•
Spare, fully-charged battery packs
•
Additional printer driver files if you plan to use another printer
•
Proof of purchase, in case you need to show it to customs officials
•
International Traveler’s Warranty passport
Special considerations
Follow the same special considerations as when traveling with the
computer. In addition, these tips are useful when traveling
internationally:
•
When traveling in another country, check that the local AC voltage
and the AC adapter power cord specifications are compatible. If
not, purchase a power cord that is compatible with the local AC
voltage. Do not use converter kits sold for appliances to power
the computer.
•
If you are using the modem, check if the modem and connector is
compatible with the telecommunications system of the country
you are traveling in.
740-e.book Page 29 Monday, July 23, 2001 3:40 PM
29
Securing your computer
Your computer is a valuable investment that you need to take care of.
Learn how to protect and take care of your computer.
Security features include fingerprint recognition, a security notch and
passwords.
Using the fingerprint recognition sensor
A fingerprint recognition sensor is located at the bottom of your
keyboard to the right of your touchpad. This security feature allows
only an authorized user to access the computer. For more details see
the related documentation that comes with your computer.
740-e.book Page 30 Monday, July 23, 2001 3:40 PM
30
1 Getting to know your TravelMate
Using a computer security lock
A security keylock notch located on the left panel of the computer lets
you connect a Kensington-compatible computer security lock.
Wrap a computer security lock cable around an immovable object such
as a table or locked drawer handle. Insert the lock into the notch and
turn the key to secure the lock. Some keyless models are also available.
Using passwords
Passwords protect your computer from unauthorized access. Setting
these passwords creates several different levels of protection for your
computer and data:
•
Setup Password prevents unauthorized entry to the BIOS Utility.
Once set, you must key-in this password to gain access to the BIOS
Utility. See “BIOS Utility” on page 41 and your online guide for
more details.
•
Power-on Password secures your computer against unauthorized
use. Combine the use of this password with password checkpoints
on boot-up and resume from hibernation for maximum security.
•
Hard Disk Password protects your data by preventing
unauthorized access to your hard disk. Even if the hard disk is
removed from the computer and moved to another computer, it
cannot be accessed without the Hard Disk Password.
Important! Do not forget your Setup and Hard Disk Password! If
you forget your password, please get in touch with your dealer or
an authorized service center.
740-e.book Page 31 Monday, July 23, 2001 3:40 PM
31
•
Other passwords include Windows and screensaver passwords.
Entering passwords
When a password is set, a password prompt appears in the left-hand
corner of the display screen.
•
When the Setup Password is set, the following prompt appears
when you press F2 to enter the BIOS Utility at boot-up.
Type the Setup Password and press Enter to access the BIOS Utility.
•
When the Power-on Password is set, the following prompt appears
at boot-up.
Type the Power-on Password (a . symbol appears for each
character you type) and press Enter to use the computer. If you
enter the password incorrectly, an x symbol appears. Try again
and press Enter.
•
When the Hard Disk Password is set, the following prompt appears
at boot-up.
Type the Hard Disk Password (a . symbol appears for each
character you type) and press Enter to use the computer. If you
enter the password incorrectly, an x symbol appears. Try again
and press Enter.
Important! You have three chances to enter a password. If you
successfully entered the password, you are presented with a
correct entry symbol.
If you fail to enter the password correctly after three tries, the
740-e.book Page 32 Monday, July 23, 2001 3:40 PM
32
1 Getting to know your TravelMate
following message or symbol appears.
Slide and hold the power switch for four seconds to shut down the
computer. Then turn on the computer again, and try again. If you
fail to enter the Hard Disk Password, please contact your dealer or
an authorized service center.
Setting passwords
You can set passwords using:
•
Notebook Manager
•
BIOS Utility
See your online guide for more details.
740-e.book Page 33 Monday, July 23, 2001 3:40 PM
2 Customizing
my computer
740-e.book Page 34 Monday, July 23, 2001 3:40 PM
After learning the basics of your TravelMate
computer, let’s get acquainted with the
advanced features of your computer. In this
chapter, you will learn how to add options,
upgrade components for better performance,
and customize your computer.
key link: accessories.acer.com
740-e.book Page 35 Monday, July 23, 2001 3:40 PM
35
Expanding through options
Your TravelMate offers you a complete mobile computing experience.
Connectivity options
Ports allow you to connect peripheral devices to your computer as you
would with a desktop PC. For instructions on how to connect different
external devices to the computer, see your online guide for more
details.
Fax/data modem
Some models have a built-in V.90 56Kbps AC’97 Link fax/data modem.
Warning! This modem port is not compatible with digital
phone lines. Plugging this modem into a digital phone line
will damage the modem.
To use the fax/data modem port, connect a phone cable from the
modem port to a telephone jack.
Start your communications software program. See your
communications manual for instructions.
740-e.book Page 36 Monday, July 23, 2001 3:40 PM
36
2 Customizing my computer
Built-in network feature
The built-in network feature allows you to connect your computer to
an Ethernet-based (10/100 Mbps) network.
To use the network feature, connect an Ethernet cable from the
network jack on the rear of the computer to a network jack or hub on
your network.
Fast infrared
The computer’s fast infrared (FIR) port allows you to do wireless data
transfer with other IR-aware computers and peripherals such as PDAs
(personal digital assistants), mobile phones, and infrared printers. The
infrared port can transfer data at speeds of up to four megabits per
second (Mbps) at a distance of up to one meter.
740-e.book Page 37 Monday, July 23, 2001 3:40 PM
37
Universal Serial Bus
The Universal Serial Bus (USB) port is a high-speed serial bus which
allows you to connect and daisy-chain USB peripherals without taking
up precious system resources. Your computer has two ports available.
PC Card slot
There are two type II or one type III CardBus PC Card slot(s) found on
the left side of the computer. This slot accepts credit-card-sized cards
that enhance the usability and expandability of the computer. These
cards should have a PC Card logo on them.
PC Cards (formerly PCMCIA) are add-on cards for portable computers,
giving you expansion possibilities long afforded by desktop PCs.
Popular type III cards include flash memory, SRAM, fax/data modem,
LAN and SCSI cards. CardBus improves on the 16-bit PC card
technology by expanding the bandwidth to 32 bits.
Note: Refer to your card’s manual for details on how to install
and use the card and its functions.
740-e.book Page 38 Monday, July 23, 2001 3:40 PM
38
2 Customizing my computer
Inserting a PC Card
Insert the card into the slot and make the proper connections (e.g.,
network cable), if necessary. See your card manual for details.
Ejecting a PC Card
Before ejecting a PC Card:
1
Exit the application using the card.
2
Left-click on the PC Card icon on the taskbar and stop the card
operation.
3
Press the slot eject button to pop out the eject button (a); then
press it again to eject the card (b).
740-e.book Page 39 Monday, July 23, 2001 3:40 PM
39
Upgrade options
Your computer delivers superior power and performance. However,
some users and the applications they use may demand more. This
computer allows you to upgrade key components when you need
increased performance.
Note: Contact your authorized dealer if you decide to perform a
key component upgrade.
Memory upgrade
Memory is expandable to 1 GB, employing 64/128/256/512-MB 64-bit
industry standard soDIMMs (Small Outline Dual Inline Memory
Modules). The computer supports SDRAM (Synchronous Dynamic
Random Access Memory).
There are two memory slots on your computer, one of which is
occupied by standard memory. You can upgrade memory by installing
a memory module into the available slot, or replacing the standard
memory with a higher-capacity memory module.
Installing memory
Follow these steps to install memory:
1
Turn off the computer, unplug the AC adapter (if connected) and
remove the battery pack. Then turn the computer over to access
its base.
740-e.book Page 40 Monday, July 23, 2001 3:40 PM
40
2 Customizing my computer
2
Remove the screw from the memory cover (a); then lift up and
remove the memory cover (b).
3
Insert the memory module diagonally into the slot (a), then gently
press it down (b) until it clicks into place.
4
Replace the memory cover and secure it with the screw.
5
Reinstall the battery pack, and reconnect the AC adapter.
6
Turn on the computer.
The computer automatically detects and reconfigures the total
memory size.
740-e.book Page 41 Monday, July 23, 2001 3:40 PM
41
Using system utilities
Notebook Manager
The computer has a built-in system setup program called Notebook
Manager. The Windows-based Notebook Manager allows you to set
passwords, the startup sequence of the drives, and power
management settings. It also shows current hardware configurations.
To start the Notebook Manager, press Fn-F2 or follow these steps:
1
Click on Start, Programs, then Notebook Manager.
2
Select the Notebook Manager application to run the program.
Click on Help for more information.
BIOS Utility
The BIOS Utility is a hardware configuration program built into your
computer’s BIOS (basic input/ouput system).
Your computer is already properly configured and optimized, and you
do not need to run this utility. However, if you encounter
configuration problems, you may need to run it.
740-e.book Page 42 Monday, July 23, 2001 3:40 PM
42
2 Customizing my computer
To activate the BIOS Utility, press F2 during the POST (power-on selftest) while the TravelMate logo is being displayed. See your online
guide for more information.
740-e.book Page 43 Monday, July 23, 2001 3:40 PM
3 Troubleshooting
my computer
740-e.book Page 44 Monday, July 23, 2001 3:40 PM
This chapter instructs you on how to deal with
common system problems. Read it before
calling a technician if a problem occurs.
Solutions to more serious problems require
opening up the computer. Do not attempt to
open the computer by yourself. Contact your
dealer or an authorized service center for
assistance.
key link: www.acersupport.com
740-e.book Page 45 Monday, July 23, 2001 3:40 PM
45
Frequently-asked questions
The following is a list of possible situations that may arise during the
use of your computer. Easy answers and solutions are provided for
each one.
I pressed the power switch and opened the display, but the computer
does not start or boot-up.
Look at the Power indicator:
•
•
•
If it is not lit, no power is being applied to the computer. Check
the following:
•
If you are running on battery power, it may be low and unable
to power the computer. Connect the AC adapter to recharge
the battery pack.
•
Make sure that the AC adapter is plugged in properly to the
computer and to the power outlet.
If it is lit, check the following:
•
If the Sleep indicator is lit, the computer is in Sleep mode.
Press any key or tap on the touchpad to resume.
•
Is a non-bootable (non-system) diskette in the floppy drive?
Remove or replace it with a system diskette and press Ctrl-AltDel to restart the system.
The operating system files may be damaged or missing. Insert the
startup disk you created during Windows setup into the floppy
drive and press Ctrl-Alt-Del to restart the system. This will
diagnose your system and make necessary fixes.
Nothing appears on the screen.
The computer’s power management system automatically blanks the
screen to save power. Press any key to turn the display back on.
If pressing a key does not turn the display back on, two things might
be the cause:
•
The brightness level might be too low. Press Fn-→ (increase) and
Fn-← (decrease) to adjust the brightness level.
•
The display device might be set to an external monitor. Press the
display toggle hot key Fn-F5 to toggle the display back to the
computer.
740-e.book Page 46 Monday, July 23, 2001 3:40 PM
46
3 Troubleshooting my computer
Image is not full-screen.
The computer display has a native resolution of 1400 x 1050 (SXGA+).
If you set the resolution lower than this, the screen expands to fill the
computer display. Right-click on your Windows desktop and select
Properties to bring up the Display Properties dialog box. Then click
on the Settings tab to make sure that the resolution is set to the
appropriate resolution. Resolutions lower than the specified
resolution are not full-screen on the computer or on an external
monitor.
No audio is heard from the computer.
Check the following:
•
The volume may be muted. In Windows, look at the volume
control (speaker) icon on the taskbar. If it is crossed-out, click on
the icon and deselect the Mute option.
•
The speakers may be turned off. Press Fn-F8 to turn the speakers
on (this hot key also turns the speakers off).
•
The volume level may be too low. In Windows, look at the volume
control icon on the taskbar. You can also use the volume control
knob on the left panel of the computer to adjust the volume. See
“Adjusting the volume” on page 22 for more detail.
•
If headphones, earphones or external speakers are connected to
the line-out port on the computer’s right panel, the internal
speakers automatically turn off.
I want to eject the optical drive tray without turning on the power. I
cannot eject the optical drive tray.
There is a mechanical eject button on the optical drive. Simply insert
the tip of a pen or paperclip and push to eject the tray.
740-e.book Page 47 Monday, July 23, 2001 3:40 PM
47
The keyboard does not respond.
Try attaching an external keyboard to the PS/2 connector on the rear of
the computer. If it works, contact your dealer or an authorized service
center as the internal keyboard cable may be loose.
The serial mouse does not work.
Check the following:
•
Make sure that the serial cable is plugged securely into the serial
port.
•
During the POST, press F2 to access the BIOS Utility and verify that
the serial port is enabled. See “BIOS Utility” on page 41 and your
online guide for more details.
I prefer using an external keyboard and mouse, but both have PS/2
connectors and there is only one PS/2 port on the computer.
To connect two PS/2-type devices to the computer, you need to use an
optional PS/2 Y-bridge connector.
The infrared port does not work.
Check the following:
•
Make sure that the infrared ports of the two devices are facing
each other (+/- 15 degrees) a maximum of 1 meter apart.
•
Make sure there is a clear path between the two infrared ports.
Nothing should be blocking the ports.
•
Make sure you have the appropriate software running on both
devices (for file transfers) or you have the appropriate drivers (for
printing to an infrared printer).
•
During the POST, press F2 to access the BIOS Utility and verify that
the infrared port is enabled.
•
Make sure both devices are IrDA-compliant.
The printer does not work.
Check the following:
•
Make sure that the printer is connected to a power outlet and that
it is turned on.
•
Make sure that the printer cable is connected securely to the
740-e.book Page 48 Monday, July 23, 2001 3:40 PM
48
3 Troubleshooting my computer
computer’s parallel port and the corresponding port on the
printer.
•
During POST, press F2 to access the BIOS Utility and verify that the
parallel port is enabled.
I want to set up my location to use the internal modem.
To properly use your communications software (e.g., HyperTerminal),
you need to set up your location:
1
Click on Start, Settings, Control Panel.
2
Double-click on Modems.
3
Click on Dialing Properties and begin setting up your location.
Refer to the Windows manual.
I get a “Not Enough Space for Allocation” error message from the
Sleep Manager program.
This is an error message that may appear when Sleep Manager is
creating the Hibernation file. There are several different reasons that
may cause this error:
•
The hard disk has enough free space, but this free space exists as
small fragments.
The free disk space that Sleep Manager requires needs to be
contiguous. To solve this problem, use tools such as Disk
Defragmenter to compact these free disk spaces. Then run Sleep
Manager again to create the file.
•
Disk compression utilities are used.
Sleep Manager can work with most compression software.
However, Sleep Manager can only create the space on a host drive.
A host drive stores original file information and cannot be
compressed. The free space on the host drive is usually very small,
so the compression software needs to be run again to enlarge the
size of the host (uncompressed) drive for Sleep Manager.
740-e.book Page 49 Monday, July 23, 2001 3:40 PM
49
Troubleshooting tips
This notebook computer incorporates an advanced design that delivers
onscreen error message reports to help you solve problems.
•
If the system reports an error message or an error symptom occurs,
see “Error messages” on page 50. If the problem cannot be
resolved, contact your dealer. See “Requesting service” on page
52.
740-e.book Page 50 Monday, July 23, 2001 3:40 PM
50
3 Troubleshooting my computer
Error messages
If you receive an error message, note the message and take the
corrective action. The following table lists the error messages in
alphabetical order together with the recommended course of action.
Error Messages
Corrective Action
CMOS Battery Bad
Contact your dealer or an authorized service
center.
CMOS Checksum Error
Contact your dealer or an authorized service
center.
Floppy Disk Controller
Error
Contact your dealer or an authorized service
center.
Equipment
Configuration Error
Press F2 (during POST) to enter the BIOS Utility;
then press Esc to exit and reconfigure the
computer.
Fixed Disk 0 Error
Contact your dealer or an authorized service
center.
I/O Parity Error
Contact your dealer or an authorized service
center.
Insert system diskette
and press <Enter> key
to reboot
Insert a system (bootable) diskette into the floppy
drive (A:), then press Enter to reboot.
PS/2 Keyboard Error or
Not Connected
Contact your dealer or an authorized service
center.
PS/2 Keyboard Interface
Error
Contact your dealer or an authorized service
center.
Memory Size Mismatch
Press F2 (during POST) to enter the BIOS Utility;
then press Esc to exit and reconfigure the
computer.
PS/2 Pointing Device
Error
Contact your dealer or an authorized service
center.
PS/2 Pointing Device
Interface Error
Contact your dealer or an authorized service
center.
740-e.book Page 51 Monday, July 23, 2001 3:40 PM
51
Error Messages
Corrective Action
RAM Parity Error
Contact your dealer or an authorized service
center.
Real-Time Clock Error
Press F2 (during POST) to enter the BIOS Utility;
then press Esc to exit and reconfigure the
computer.
If you still encounter problems after going through the corrective
measures, please contact your dealer or an authorized service center
for assistance. Some problems may be solved using the BIOS Utility.
740-e.book Page 52 Monday, July 23, 2001 3:40 PM
52
3 Troubleshooting my computer
Requesting service
International Traveler’s Warranty (ITW)
Your computer is backed by an International Traveler’s Warranty (ITW)
that gives you security and peace of mind when traveling. Our
worldwide network of service centers are there to give you a helping
hand.
An ITW passport comes with your computer. This passport contains all
you need to know about the ITW program. A list of available,
authorized service centers is in this handy booklet. Read this passport
thoroughly.
Always have your ITW passport on hand, especially when you travel to
receive the benefits from our support centers. Place your proof-ofpurchase in the flap located inside the front cover of the ITW passport.
If the country you are traveling in does not have an Acer-authorized
ITW service site, you can still get in contact with our offices worldwide.
There are two ways to access Acer for technical support and
information:
•
Internet service worldwide (www.acer.com)
•
Technical support numbers in various countries
You can view a list of technical support numbers by following these
steps:
1
Click on Start, Settings, Control Panel.
2
Double-click on System.
3
Click on the Support Information button.
Before you call
Please have the following information available when you call Acer for
online service, and please be at your computer when you call. With
your support, we can reduce the amount of time a call takes and help
solve your problems efficiently.
If there are error messages or beeps reported by your computer, write
them down as they appear on the screen (or the number and sequence
in the case of beeps).
740-e.book Page 53 Monday, July 23, 2001 3:40 PM
53
You are required to provide the following information:
Name:________________________________________
Address:______________________________________
______________________________________________
Telephone number:____________________________
Machine and model type:_______________________
Serial number:_________________________________
Date of purchase:______________________________
740-e.book Page 54 Monday, July 23, 2001 3:40 PM
54
3 Troubleshooting my computer
740-e.book Page 55 Monday, July 23, 2001 3:40 PM
Appendix A
Specifications
740-e.book Page 56 Monday, July 23, 2001 3:40 PM
This appendix lists the general specifications
of your computer.
740-e.book Page 57 Monday, July 23, 2001 3:40 PM
57
Microprocessor
•
Intel® Pentium® III processor-M with 512 KB level 2 cache and
Intel® SpeedStep™ technology support
Memory
•
Main memory expandable to 1 GB
•
Dual 144-pin PC-133 soDIMM socket SDRAM (Synchronous
Dynamic Random Access Memory)
•
512 KB Flash ROM BIOS
Data storage
•
One 3.5-inch internal floppy drive
•
One high-capacity, Enhanced-IDE hard disk
•
One 5.25-inch internal removable optical drive (AcerMedia bay)
Display and video
•
15" TFT SXGA+ LCD displaying 1400 x 1050 resolution at 32-bit true
color
•
4X AGP bus with 3D acceleration
•
Simultaneous LCD and CRT display support
•
Dual display capability
Audio
•
16-bit AC’97 stereo audio with built-in wavetable synthesizer
•
Dual speakers and microphone
•
Separate audio ports for headphone-out, line-in and microphonein devices
Keyboard and pointing device
•
84-/85-key Windows keyboard
•
Ergonomically-centered touchpad pointing device with scroll
function
I/O ports
•
One fingerprint recognition sensor
•
Two type II or one type III CardBus PC Card slot(s)
740-e.book Page 58 Monday, July 23, 2001 3:40 PM
58
Appendix A Specifications
•
One RJ-45 jack for Ethernet
•
One RJ-11 phone jack
•
One DC-in jack (AC adapter)
•
One parallel port (ECP/EPP compliant)
•
One external monitor port
•
One PS/2 keyboard/mouse port
•
One speaker/headphone-out jack
•
One audio line-in jack
•
One microphone-in jack
•
Two USB ports
•
One 9-pin RS-232 serial port (UART16550)
•
One FIR port
•
Mini dock connector
Weight and dimensions
•
3.22 kg (7 lbs) with battery and optical drive
•
324.5 (W) x 271 (D) x 36 (H)mm
Temperature
•
Operating: 5°C ~ 35°C
•
Non-operating: -20°C ~ 65°C
Humidity (non-condensing)
•
Operating: 20% ~ 80% RH
•
Non-operating: 20% ~ 80% RH
System
•
ACPI support
•
DMI 2.0-compliant
Battery pack
•
65.3 WH Li-Ion battery pack
•
4-hour rapid charge/6-hour charge-in-use
740-e.book Page 59 Monday, July 23, 2001 3:40 PM
59
AC adapter
•
60-Watt
•
Auto sensing 100~240Vac, 50~60Hz
Options
•
64/128/256/512-MB memory upgrade modules
•
PS/2 Y-bridge cable
•
Additional Li-Ion battery pack
•
DVD/CD-RW module (includes PowerDVD software CD)
•
DockMate V
•
External numeric keypad
•
External battery charger
•
InviLink 802.11b wireless LAN PC card
•
Secondary hard drive
•
External USB video capture kit
740-e.book Page 60 Monday, July 23, 2001 3:40 PM
60
Appendix A Specifications
740-e.book Page 61 Monday, July 23, 2001 3:40 PM
Appendix B
Notices
740-e.book Page 62 Monday, July 23, 2001 3:40 PM
This appendix lists the general notices of your
computer.
740-e.book Page 63 Monday, July 23, 2001 3:40 PM
63
FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the device and receiver
•
Connect the device into an outlet on a circuit different from that to which
the receiver is connected
•
Consult the dealer or an experienced radio/television technician for help
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio and TV
reception.
Caution
Changes or modifications not expressly approved by the manufacturer could
void the user’s authority, which is granted by the Federal Communications
Commission, to operate this computer.
Use conditions
This part complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
740-e.book Page 64 Monday, July 23, 2001 3:40 PM
64
Appendix B Notices
Notice: Canadian users
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Remarque à l’intention des utilisateurs canadiens
Cet appareil numérique de la classe B respected toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
Modem notices
FCC
This equipment complies with Part 68 of the FCC rules. Located on the bottom
side of the modem is a label that contains, among other information, the FCC
Registration Number and Ringer Equivalence Number (REN) for this equipment.
Upon request, you must provide this information to your telephone company.
If your telephone equipment causes harm to the telephone network, the
telephone company may discontinue your service temporarily. If possible, they
will notify you in advance. But, if advance notice is not practical, you will be
notified as soon as possible. You will also be informed of your right to file a
complaint with the FCC.
Your telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the proper functioning of your
equipment. If they do, you will be notified in advance to give you an
opportunity to maintain uninterrupted telephone service.
If this equipment should fail to operate properly, disconnect the equipment
from the phone line to determine if it is causing the problem. If the problem is
with the equipment, discontinue use and contact your dealer or vendor.
CTR 21
This equipment has been approved [Council Decision 98/482/EC - “CTR 21”] for
pan-European single terminal connection to the Public Switched Telephone
Network (PSTN). However, due to differences between the individual PSTNs
provided in different countries, the approval does not, of itself, give an
unconditional assurance of successful operation on every PSTN termination
point. In the event of problems, you should contact your equipment supplier in
the first instance.
740-e.book Page 65 Monday, July 23, 2001 3:40 PM
65
Important safety instructions
Read these instructions carefully. Save these instructions for future reference.
1
Follow all warnings and instructions marked on the product.
2
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3
Do not use this product near water.
4
Do not place this product on an unstable cart, stand, or table. The product
may fall, causing serious damage to the product.
5
Slots and openings in the cabinet and the back or bottom are provided for
ventilation; to ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should never be placed near or
over a radiator or heat register, or in a built-in installation unless proper
ventilation is provided.
6
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
7
Do not allow anything to rest on the power cord. Do not locate this
product where persons will walk on the cord.
8
If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
9
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short out parts that could
result in a fire or electric shock. Never spill liquid of any kind on the
product.
10 Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltage points or other risks. Refer all
servicing to qualified service personnel.
11 Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a
When the power cord or plug is damaged or frayed
b
If liquid has been spilled into the product
c
If the product has been exposed to rain or water
d
If the product does not operate normally when the operating
instructions are followed. Adjust only those controls that are covered
by the operating instructions since improper adjustment of other
740-e.book Page 66 Monday, July 23, 2001 3:40 PM
66
Appendix B Notices
controls may result in damage and will often require extensive work
by a qualified technician to restore the product to normal condition.
e
If the product has been dropped or the cabinet has been damaged
f
If the product exhibits a distinct change in performance, indicating a
need for service.
12 Replace the battery with the same type as the product's battery we
recommend. Use of another battery may present a risk of fire or explosion.
Refer battery replacement to a qualified serviceman.
13 Warning! Batteries may explode if not handled properly. Do not
disassemble or dispose of them in fire. Keep them away from children and
dispose of used batteries promptly.
14 Use only the proper type of power supply cord set (provided in your
accessories box) for this unit. It should be a detachable type: UL listed/CSA
certified, type SPT-2, rated 7A 125V minimum, VDE approved or its
equivalent. Maximum length is 15 feet (4.6 meters).
Laser compliance statement
The CD or DVD drive used with this computer is a laser product. The CD or DVD
drive’s classification label (shown below) is located on the drive.
CLASS 1 LASER PRODUCT
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO
BEAM.
APPAREIL A LASER DE CLASSE 1 PRODUIT
LASERATTENTION: RADIATION DU FAISCEAU LASER INVISIBLE EN CAS
D’OUVERTURE. EVITTER TOUTE EXPOSITION AUX RAYONS.
LUOKAN 1 LASERLAITE LASER KLASSE 1
VORSICHT: UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET
NICHT DEM STRAHLL AUSSETZEN
PRODUCTO LÁSER DE LA CLASE I
ADVERTENCIA: RADIACIÓN LÁSER INVISIBLE AL SER ABIERTO. EVITE
EXPONERSE A LOS RAYOS.
ADVARSEL: LASERSTRÅLING VEDÅBNING SE IKKE IND I STRÅLEN.
VARO! LAVATTAESSA OLET ALTTINA LASERSÅTEILYLLE.
VARNING: LASERSTRÅLNING NÅR DENNA DEL ÅR ÖPPNAD ÅLÅ TUIJOTA
SÅTEESEENSTIRRA EJ IN I STRÅLEN
VARNING: LASERSTRÅLNING NAR DENNA DEL ÅR ÖPPNADSTIRRA EJ IN I
STRÅLEN
ADVARSEL: LASERSTRÅLING NAR DEKSEL ÅPNESSTIRR IKKE INN I STRÅLEN
740-e.book Page 67 Monday, July 23, 2001 3:40 PM
67
Lithium battery statement
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Discard used
batteries according to the manufacturer’s instructions.
ADVARSEL!
Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun
ske med batteri af samme fabrikat og type. Léver det brugte batteri tilbage til
leverandøren.
ADVARSEL
Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller
en tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i
henhold til fabrikantens instruksjoner.
VARNING
Explosionsfara vid felaktigt batteribyte. Anvãnd samma batterityp eller en
ekvivalent typ som rekommenderas av apparattillverkaren. Kassera anvãnt
batteri enligt fabrikantens instruktion.
VAROITUS
Päristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo
ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo
valmistajan ohjeiden mukaisesti.
VORSICHT!
Explosionsgefahr bei unsachgemäßen Austausch der Batterie Ersatz nur durch
denselben oder einem vom Hersteller empfohlenem ähnlichen Typ. Entsorgung
gebrauchter Batterien nach Angaben des Herstellers.
740-e.book Page 68 Monday, July 23, 2001 3:40 PM
68
Appendix B Notices
Year 2000 compliance statement
The TravelMate 740 series notebook computer carries the "Hardware NSTL
Tested Year 2000 Compliant" logo, which certifies that this model has been
tested by NSTL using the YMark2000 test, and has been found to meet NSTL's
standards for Year 2000 hardware compliance.
For more details, check the Acer Year 2000 Resource Center Web site
(global.acer.com/service/pcy2000.html)
740-e.book Page 69 Monday, July 23, 2001 3:40 PM
69
Index
%
&
!"# '
$%&"
'
(, )
)
)
'
*
*
+ (
(
'
', $,$ $,$
)
'
- *
./0#1%1
1%1 '
+ (
,
'
2
'
-
(
!340#+
/
(
*
4+ 0
5-$ 1
740-e.book Page 70 Monday, July 23, 2001 3:40 PM
70
()–
()
'
('
*
2
+ (
6 '
7
(
(
3
'
()
4
+ (
(
8 (*
(7
(7
('
8"#39+%%: *
'
$%&" ', *
*
*
# 7
'
5
1
8#;
*
7
7
$%&" .
(
'
)
(
+ (
+
#
7
'
#
'
'
8
7
7–)
*
*
)
9
(*
:
+
740-e.book Page 71 Monday, July 23, 2001 3:40 PM
71
'
;
+
! 3< 4
'
4+ 

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement